| /* Copyright (c) 2016, The Linux Foundation. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * * Neither the name of The Linux Foundation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| #ifndef __QCAMERADUALCAMSETTINGS_H__ |
| #define __QCAMERADUALCAMSETTINGS_H__ |
| |
| typedef enum { |
| NONE, |
| SENSOR_SLEEP, |
| ISPIF_FRAME_DROP |
| } dual_cam_low_power_mode; |
| |
| |
| // Dual camera settings |
| |
| // This setting should be 1 if hw sync is in place, 0 otherwise. |
| #define DUALCAM_HW_SYNC_ENABLED (1) |
| |
| // This setting enables/disables LPM. When disabled(0), none of the cameras will go |
| // into low power mode. |
| #define DUALCAM_LPM_ENABLE (1) |
| |
| // This setting indicates low power modes for two cameras. Possible low power modes are listed |
| // under dual_cam_low_power_mode. |
| #define DUALCAM_LPM_MAIN (ISPIF_FRAME_DROP) |
| #define DUALCAM_LPM_AUX (SENSOR_SLEEP) |
| |
| |
| // FOV-control settings |
| |
| // Main camera fallback mechanism for low light and macro scene |
| // If set to 1, low light and macro scene will force the transition from narrow FOV to |
| // wide FOV camera |
| // If set to 0, these conditions are ignored and the forced transition from narrow FOV to |
| // wide FOV camera will not take place |
| #define FOVC_MAIN_CAM_FALLBACK_MECHANISM (1) |
| |
| // Use external zoom translator. Setting this to 1 allows opening an external lib containing |
| // implementation for custom zoom translation for user zoom to wide zoom and tele zoom. This |
| // would override the default zoom translation logic present in the FOV-control. |
| #define FOVC_USE_EXTERNAL_ZOOM_TRANSLATOR (0) |
| |
| // camera mode settings |
| |
| // This setting will enable the snapshot postprocessing. |
| // If set to 1, it will enable capturing snapshots from both the cameras and feeding those |
| // to snapshot postprocessing algorithm. |
| // If set to 0, a snapshot is captured only from the master camera session at any time. |
| #define FOVC_CAM_SNAPSHOT_PP_ENABLE (1) |
| |
| // This setting indicates the minimum zoom value for the snapshot postprocessing. |
| // Snapshot postprocessing is only enabled for zoom equal to and higher than this value. |
| #define FOVC_CAM_SNAPSHOT_PP_ZOOM_MIN (1.5) |
| |
| // This setting indicates the maximum zoom value for the snapshot postprocessing. |
| // Snapshot postprocessing is only enabled for zoom equal to and lower than this value. |
| #define FOVC_CAM_SNAPSHOT_PP_ZOOM_MAX (2.75) |
| |
| // This setting indicates the minimum lux value for snapshot postprocessing. |
| // If the current lux is lower than this value, snapshot postprocessing will be disabled |
| #define FOVC_CAM_SNAPSHOT_PP_LUX_MIN (100) |
| |
| // camcorder mode settings |
| |
| // This setting will enable the snapshot postprocessing. |
| // If set to 1, it will enable capturing snapshots from both the cameras and feeding those |
| // to snapshot postprocessing algorithm. |
| // If set to 0, a snapshot is captured only from the master camera session at any time. |
| #define FOVC_CAMCORDER_SNAPSHOT_PP_ENABLE (0) |
| |
| // Main and Aux camera switch settings |
| // These values indicates the lux amd min focus distance thresholds to switch the preview |
| // from main to aux camera. If the current lux or focus distance values are lower than |
| // these thresholds, camera preview will not switch from main to aux. |
| #define FOVC_AUXCAM_SWITCH_LUX_MIN (100) |
| #define FOVC_AUXCAM_SWITCH_FOCUS_DIST_CM_MIN (15) |
| |
| // This setting indicates the threshold for zoom stable count in terms of number of frames. |
| // This is a power optimization setting. When in the transition zone, if the zoom doesn't |
| // change for thse many frames, the non-master camera is put in LPM. |
| #define FOVC_ZOOM_STABLE_COUNT_THRESHOLD (15) |
| |
| // This setting indicates the threshold for focus distance stable count in terms of number of frames |
| // This threshold is used for the macro scene focus and change the camera state accordingly. |
| #define FOVC_FOCUS_DIST_STABLE_COUNT_THRESHOLD (15) |
| |
| // This setting indicates the threshold for brightness stable count in terms of number of frames. |
| // This threshold is used for the low light condition and change the camera state accordingly. |
| #define FOVC_BRIGHTNESS_STABLE_COUNT_THRESHOLD (15) |
| |
| #endif /* __QCAMERADUALCAM_H__ */ |
