/* Copyright (c) 2012-2016, The Linux Foundation. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above
 *       copyright notice, this list of conditions and the following
 *       disclaimer in the documentation and/or other materials provided
 *       with the distribution.
 *     * Neither the name of The Linux Foundation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

#define LOG_TAG "QCameraParameters"

// To remove
#include <cutils/properties.h>

// System dependencies
#include <math.h>
#include <string.h>
#include <stdlib.h>
#include <utils/Errors.h>
#define SYSINFO_H <SYSTEM_HEADER_PREFIX/sysinfo.h>
#include SYSINFO_H
#include "gralloc_priv.h"
#include "graphics.h"

// Camera dependencies
#include "QCameraBufferMaps.h"
#include "QCamera2HWI.h"
#include "QCameraParameters.h"
#include "QCameraTrace.h"

extern "C" {
#include "mm_camera_dbg.h"
}

#define PI 3.14159265
#define ASPECT_TOLERANCE 0.001
#define CAMERA_DEFAULT_LONGSHOT_STAGES 4
#define CAMERA_MIN_LONGSHOT_STAGES 2
#define FOCUS_PERCISION 0.0000001


namespace qcamera {
// Parameter keys to communicate between camera application and driver.
const char QCameraParameters::KEY_QC_SUPPORTED_HFR_SIZES[] = "hfr-size-values";
const char QCameraParameters::KEY_QC_PREVIEW_FRAME_RATE_MODE[] = "preview-frame-rate-mode";
const char QCameraParameters::KEY_QC_SUPPORTED_PREVIEW_FRAME_RATE_MODES[] = "preview-frame-rate-modes";
const char QCameraParameters::KEY_QC_PREVIEW_FRAME_RATE_AUTO_MODE[] = "frame-rate-auto";
const char QCameraParameters::KEY_QC_PREVIEW_FRAME_RATE_FIXED_MODE[] = "frame-rate-fixed";
const char QCameraParameters::KEY_QC_TOUCH_AF_AEC[] = "touch-af-aec";
const char QCameraParameters::KEY_QC_SUPPORTED_TOUCH_AF_AEC[] = "touch-af-aec-values";
const char QCameraParameters::KEY_QC_TOUCH_INDEX_AEC[] = "touch-index-aec";
const char QCameraParameters::KEY_QC_TOUCH_INDEX_AF[] = "touch-index-af";
const char QCameraParameters::KEY_QC_SCENE_DETECT[] = "scene-detect";
const char QCameraParameters::KEY_QC_SUPPORTED_SCENE_DETECT[] = "scene-detect-values";
const char QCameraParameters::KEY_QC_ISO_MODE[] = "iso";
const char QCameraParameters::KEY_QC_CONTINUOUS_ISO[] = "continuous-iso";
const char QCameraParameters::KEY_QC_MIN_ISO[] = "min-iso";
const char QCameraParameters::KEY_QC_MAX_ISO[] = "max-iso";
const char QCameraParameters::KEY_QC_SUPPORTED_ISO_MODES[] = "iso-values";
const char QCameraParameters::KEY_QC_EXPOSURE_TIME[] = "exposure-time";
const char QCameraParameters::KEY_QC_MIN_EXPOSURE_TIME[] = "min-exposure-time";
const char QCameraParameters::KEY_QC_MAX_EXPOSURE_TIME[] = "max-exposure-time";
const char QCameraParameters::KEY_QC_CURRENT_EXPOSURE_TIME[] = "cur-exposure-time";
const char QCameraParameters::KEY_QC_CURRENT_ISO[] = "cur-iso";
const char QCameraParameters::KEY_QC_LENSSHADE[] = "lensshade";
const char QCameraParameters::KEY_QC_SUPPORTED_LENSSHADE_MODES[] = "lensshade-values";
const char QCameraParameters::KEY_QC_AUTO_EXPOSURE[] = "auto-exposure";
const char QCameraParameters::KEY_QC_SUPPORTED_AUTO_EXPOSURE[] = "auto-exposure-values";
const char QCameraParameters::KEY_QC_DENOISE[] = "denoise";
const char QCameraParameters::KEY_QC_SUPPORTED_DENOISE[] = "denoise-values";
const char QCameraParameters::KEY_QC_FOCUS_ALGO[] = "selectable-zone-af";
const char QCameraParameters::KEY_QC_SUPPORTED_FOCUS_ALGOS[] = "selectable-zone-af-values";
const char QCameraParameters::KEY_QC_MANUAL_FOCUS_POSITION[] = "manual-focus-position";
const char QCameraParameters::KEY_QC_MANUAL_FOCUS_POS_TYPE[] = "manual-focus-pos-type";
const char QCameraParameters::KEY_QC_MIN_FOCUS_POS_INDEX[] = "min-focus-pos-index";
const char QCameraParameters::KEY_QC_MAX_FOCUS_POS_INDEX[] = "max-focus-pos-index";
const char QCameraParameters::KEY_QC_MIN_FOCUS_POS_DAC[] = "min-focus-pos-dac";
const char QCameraParameters::KEY_QC_MAX_FOCUS_POS_DAC[] = "max-focus-pos-dac";
const char QCameraParameters::KEY_QC_MIN_FOCUS_POS_RATIO[] = "min-focus-pos-ratio";
const char QCameraParameters::KEY_QC_MAX_FOCUS_POS_RATIO[] = "max-focus-pos-ratio";
const char QCameraParameters::KEY_QC_FOCUS_POSITION_SCALE[] = "cur-focus-scale";
const char QCameraParameters::KEY_QC_MIN_FOCUS_POS_DIOPTER[] = "min-focus-pos-diopter";
const char QCameraParameters::KEY_QC_MAX_FOCUS_POS_DIOPTER[] = "max-focus-pos-diopter";
const char QCameraParameters::KEY_QC_FOCUS_POSITION_DIOPTER[] = "cur-focus-diopter";
const char QCameraParameters::KEY_QC_FACE_DETECTION[] = "face-detection";
const char QCameraParameters::KEY_QC_SUPPORTED_FACE_DETECTION[] = "face-detection-values";
const char QCameraParameters::KEY_QC_FACE_RECOGNITION[] = "face-recognition";
const char QCameraParameters::KEY_QC_SUPPORTED_FACE_RECOGNITION[] = "face-recognition-values";
const char QCameraParameters::KEY_QC_MEMORY_COLOR_ENHANCEMENT[] = "mce";
const char QCameraParameters::KEY_QC_SUPPORTED_MEM_COLOR_ENHANCE_MODES[] = "mce-values";
const char QCameraParameters::KEY_QC_DIS[] = "dis";
const char QCameraParameters::KEY_QC_OIS[] = "ois";
const char QCameraParameters::KEY_QC_SUPPORTED_DIS_MODES[] = "dis-values";
const char QCameraParameters::KEY_QC_SUPPORTED_OIS_MODES[] = "ois-values";
const char QCameraParameters::KEY_QC_VIDEO_HIGH_FRAME_RATE[] = "video-hfr";
const char QCameraParameters::KEY_QC_VIDEO_HIGH_SPEED_RECORDING[] = "video-hsr";
const char QCameraParameters::KEY_QC_SUPPORTED_VIDEO_HIGH_FRAME_RATE_MODES[] = "video-hfr-values";
const char QCameraParameters::KEY_QC_REDEYE_REDUCTION[] = "redeye-reduction";
const char QCameraParameters::KEY_QC_SUPPORTED_REDEYE_REDUCTION[] = "redeye-reduction-values";
const char QCameraParameters::KEY_QC_HIGH_DYNAMIC_RANGE_IMAGING[] = "hdr";
const char QCameraParameters::KEY_QC_SUPPORTED_HDR_IMAGING_MODES[] = "hdr-values";
const char QCameraParameters::KEY_QC_ZSL[] = "zsl";
const char QCameraParameters::KEY_QC_SUPPORTED_ZSL_MODES[] = "zsl-values";
const char QCameraParameters::KEY_QC_ZSL_BURST_INTERVAL[] = "capture-burst-interval";
const char QCameraParameters::KEY_QC_ZSL_BURST_LOOKBACK[] = "capture-burst-retroactive";
const char QCameraParameters::KEY_QC_ZSL_QUEUE_DEPTH[] = "capture-burst-queue-depth";
const char QCameraParameters::KEY_QC_CAMERA_MODE[] = "camera-mode";
const char QCameraParameters::KEY_QC_AE_BRACKET_HDR[] = "ae-bracket-hdr";
const char QCameraParameters::KEY_QC_SUPPORTED_AE_BRACKET_MODES[] = "ae-bracket-hdr-values";
const char QCameraParameters::KEY_QC_SUPPORTED_RAW_FORMATS[] = "raw-format-values";
const char QCameraParameters::KEY_QC_RAW_FORMAT[] = "raw-format";
const char QCameraParameters::KEY_QC_ORIENTATION[] = "orientation";
const char QCameraParameters::KEY_QC_SELECTABLE_ZONE_AF[] = "selectable-zone-af";
const char QCameraParameters::KEY_QC_CAPTURE_BURST_EXPOSURE[] = "capture-burst-exposures";
const char QCameraParameters::KEY_QC_NUM_SNAPSHOT_PER_SHUTTER[] = "num-snaps-per-shutter";
const char QCameraParameters::KEY_QC_NUM_RETRO_BURST_PER_SHUTTER[] = "num-retro-burst-per-shutter";
const char QCameraParameters::KEY_QC_SNAPSHOT_BURST_LED_ON_PERIOD[] = "zsl-burst-led-on-period";
const char QCameraParameters::KEY_QC_NO_DISPLAY_MODE[] = "no-display-mode";
const char QCameraParameters::KEY_QC_RAW_PICUTRE_SIZE[] = "raw-size";
const char QCameraParameters::KEY_QC_SUPPORTED_SKIN_TONE_ENHANCEMENT_MODES[] = "skinToneEnhancement-values";
const char QCameraParameters::KEY_QC_SUPPORTED_LIVESNAPSHOT_SIZES[] = "supported-live-snapshot-sizes";
const char QCameraParameters::KEY_QC_SUPPORTED_HDR_NEED_1X[] = "hdr-need-1x-values";
const char QCameraParameters::KEY_QC_HDR_NEED_1X[] = "hdr-need-1x";
const char QCameraParameters::KEY_QC_PREVIEW_FLIP[] = "preview-flip";
const char QCameraParameters::KEY_QC_VIDEO_FLIP[] = "video-flip";
const char QCameraParameters::KEY_QC_SNAPSHOT_PICTURE_FLIP[] = "snapshot-picture-flip";
const char QCameraParameters::KEY_QC_SUPPORTED_FLIP_MODES[] = "flip-mode-values";
const char QCameraParameters::KEY_QC_VIDEO_HDR[] = "video-hdr";
const char QCameraParameters::KEY_QC_SENSOR_HDR[] = "sensor-hdr";
const char QCameraParameters::KEY_QC_VT_ENABLE[] = "avtimer";
const char QCameraParameters::KEY_QC_SUPPORTED_VIDEO_HDR_MODES[] = "video-hdr-values";
const char QCameraParameters::KEY_QC_SUPPORTED_SENSOR_HDR_MODES[] = "sensor-hdr-values";
const char QCameraParameters::KEY_QC_AUTO_HDR_ENABLE [] = "auto-hdr-enable";
const char QCameraParameters::KEY_QC_SNAPSHOT_BURST_NUM[] = "snapshot-burst-num";
const char QCameraParameters::KEY_QC_SNAPSHOT_FD_DATA[] = "snapshot-fd-data-enable";
const char QCameraParameters::KEY_QC_TINTLESS_ENABLE[] = "tintless";
const char QCameraParameters::KEY_QC_SCENE_SELECTION[] = "scene-selection";
const char QCameraParameters::KEY_QC_CDS_MODE[] = "cds-mode";
const char QCameraParameters::KEY_QC_VIDEO_CDS_MODE[] = "video-cds-mode";
const char QCameraParameters::KEY_QC_SUPPORTED_CDS_MODES[] = "cds-mode-values";
const char QCameraParameters::KEY_QC_SUPPORTED_VIDEO_CDS_MODES[] = "video-cds-mode-values";
const char QCameraParameters::KEY_QC_TNR_MODE[] = "tnr-mode";
const char QCameraParameters::KEY_QC_VIDEO_TNR_MODE[] = "video-tnr-mode";
const char QCameraParameters::KEY_QC_SUPPORTED_TNR_MODES[] = "tnr-mode-values";
const char QCameraParameters::KEY_QC_SUPPORTED_VIDEO_TNR_MODES[] = "video-tnr-mode-values";
const char QCameraParameters::KEY_QC_VIDEO_ROTATION[] = "video-rotation";
const char QCameraParameters::KEY_QC_SUPPORTED_VIDEO_ROTATION_VALUES[] = "video-rotation-values";
const char QCameraParameters::KEY_QC_AF_BRACKET[] = "af-bracket";
const char QCameraParameters::KEY_QC_SUPPORTED_AF_BRACKET_MODES[] = "af-bracket-values";
const char QCameraParameters::KEY_QC_RE_FOCUS[] = "re-focus";
const char QCameraParameters::KEY_QC_SUPPORTED_RE_FOCUS_MODES[] = "re-focus-values";
const char QCameraParameters::KEY_QC_CHROMA_FLASH[] = "chroma-flash";
const char QCameraParameters::KEY_QC_SUPPORTED_CHROMA_FLASH_MODES[] = "chroma-flash-values";
const char QCameraParameters::KEY_QC_OPTI_ZOOM[] = "opti-zoom";
const char QCameraParameters::KEY_QC_SEE_MORE[] = "see-more";
const char QCameraParameters::KEY_QC_STILL_MORE[] = "still-more";
const char QCameraParameters::KEY_QC_SUPPORTED_OPTI_ZOOM_MODES[] = "opti-zoom-values";
const char QCameraParameters::KEY_QC_HDR_MODE[] = "hdr-mode";
const char QCameraParameters::KEY_QC_SUPPORTED_KEY_QC_HDR_MODES[] = "hdr-mode-values";
const char QCameraParameters::KEY_QC_TRUE_PORTRAIT[] = "true-portrait";
const char QCameraParameters::KEY_QC_SUPPORTED_TRUE_PORTRAIT_MODES[] = "true-portrait-values";
const char QCameraParameters::KEY_QC_SUPPORTED_SEE_MORE_MODES[] = "see-more-values";
const char QCameraParameters::KEY_QC_SUPPORTED_STILL_MORE_MODES[] = "still-more-values";
const char QCameraParameters::KEY_INTERNAL_PERVIEW_RESTART[] = "internal-restart";
const char QCameraParameters::KEY_QC_RDI_MODE[] = "rdi-mode";
const char QCameraParameters::KEY_QC_SUPPORTED_RDI_MODES[] = "rdi-mode-values";
const char QCameraParameters::KEY_QC_SECURE_MODE[] = "secure-mode";
const char QCameraParameters::KEY_QC_SUPPORTED_SECURE_MODES[] = "secure-mode-values";
const char QCameraParameters::ISO_HJR[] = "ISO_HJR";
const char QCameraParameters::KEY_QC_AUTO_HDR_SUPPORTED[] = "auto-hdr-supported";
const char QCameraParameters::KEY_QC_LONGSHOT_SUPPORTED[] = "longshot-supported";
const char QCameraParameters::KEY_QC_ZSL_HDR_SUPPORTED[] = "zsl-hdr-supported";
const char QCameraParameters::KEY_QC_WB_MANUAL_CCT[] = "wb-manual-cct";
const char QCameraParameters::KEY_QC_MIN_WB_CCT[] = "min-wb-cct";
const char QCameraParameters::KEY_QC_MAX_WB_CCT[] = "max-wb-cct";

const char QCameraParameters::KEY_QC_MANUAL_WB_GAINS[] = "manual-wb-gains";
const char QCameraParameters::KEY_QC_MIN_WB_GAIN[] = "min-wb-gain";
const char QCameraParameters::KEY_QC_MAX_WB_GAIN[] = "max-wb-gain";

const char QCameraParameters::KEY_QC_MANUAL_WB_TYPE[] = "manual-wb-type";
const char QCameraParameters::KEY_QC_MANUAL_WB_VALUE[] = "manual-wb-value";

const char QCameraParameters::WHITE_BALANCE_MANUAL[] = "manual";
const char QCameraParameters::FOCUS_MODE_MANUAL_POSITION[] = "manual";
const char QCameraParameters::KEY_QC_CACHE_VIDEO_BUFFERS[] = "cache-video-buffers";

const char QCameraParameters::KEY_QC_LONG_SHOT[] = "long-shot";
const char QCameraParameters::KEY_QC_INITIAL_EXPOSURE_INDEX[] = "initial-exp-index";
const char QCameraParameters::KEY_QC_INSTANT_AEC[] = "instant-aec";
const char QCameraParameters::KEY_QC_INSTANT_CAPTURE[] = "instant-capture";
const char QCameraParameters::KEY_QC_INSTANT_AEC_SUPPORTED_MODES[] = "instant-aec-values";
const char QCameraParameters::KEY_QC_INSTANT_CAPTURE_SUPPORTED_MODES[] = "instant-capture-values";

// Values for effect settings.
const char QCameraParameters::EFFECT_EMBOSS[] = "emboss";
const char QCameraParameters::EFFECT_SKETCH[] = "sketch";
const char QCameraParameters::EFFECT_NEON[] = "neon";
const char QCameraParameters::EFFECT_BEAUTY[] = "beauty";


// Values for auto exposure settings.
const char QCameraParameters::TOUCH_AF_AEC_OFF[] = "touch-off";
const char QCameraParameters::TOUCH_AF_AEC_ON[] = "touch-on";

// Values for scene mode settings.
const char QCameraParameters::SCENE_MODE_ASD[] = "asd";   // corresponds to CAMERA_BESTSHOT_AUTO in HAL
const char QCameraParameters::SCENE_MODE_BACKLIGHT[] = "backlight";
const char QCameraParameters::SCENE_MODE_FLOWERS[] = "flowers";
const char QCameraParameters::SCENE_MODE_AR[] = "AR";
const char QCameraParameters::SCENE_MODE_HDR[] = "hdr";

// Formats for setPreviewFormat and setPictureFormat.
const char QCameraParameters::PIXEL_FORMAT_YUV420SP_ADRENO[] = "yuv420sp-adreno";
const char QCameraParameters::PIXEL_FORMAT_YV12[] = "yuv420p";
const char QCameraParameters::PIXEL_FORMAT_NV12[] = "nv12";
const char QCameraParameters::QC_PIXEL_FORMAT_NV12_VENUS[] = "nv12-venus";

// Values for raw image formats
const char QCameraParameters::QC_PIXEL_FORMAT_YUV_RAW_8BIT_YUYV[] = "yuv-raw8-yuyv";
const char QCameraParameters::QC_PIXEL_FORMAT_YUV_RAW_8BIT_YVYU[] = "yuv-raw8-yvyu";
const char QCameraParameters::QC_PIXEL_FORMAT_YUV_RAW_8BIT_UYVY[] = "yuv-raw8-uyvy";
const char QCameraParameters::QC_PIXEL_FORMAT_YUV_RAW_8BIT_VYUY[] = "yuv-raw8-vyuy";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_8GBRG[] = "bayer-qcom-8gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_8GRBG[] = "bayer-qcom-8grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_8RGGB[] = "bayer-qcom-8rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_8BGGR[] = "bayer-qcom-8bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_10GBRG[] = "bayer-qcom-10gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_10GRBG[] = "bayer-qcom-10grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_10RGGB[] = "bayer-qcom-10rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_10BGGR[] = "bayer-qcom-10bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_12GBRG[] = "bayer-qcom-12gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_12GRBG[] = "bayer-qcom-12grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_12RGGB[] = "bayer-qcom-12rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_12BGGR[] = "bayer-qcom-12bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_14GBRG[] = "bayer-qcom-14gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_14GRBG[] = "bayer-qcom-14grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_14RGGB[] = "bayer-qcom-14rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_QCOM_RAW_14BGGR[] = "bayer-qcom-14bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_8GBRG[] = "bayer-mipi-8gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_8GRBG[] = "bayer-mipi-8grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_8RGGB[] = "bayer-mipi-8rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_8BGGR[] = "bayer-mipi-8bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_10GBRG[] = "bayer-mipi-10gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_10GRBG[] = "bayer-mipi-10grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_10RGGB[] = "bayer-mipi-10rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_10BGGR[] = "bayer-mipi-10bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_12GBRG[] = "bayer-mipi-12gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_12GRBG[] = "bayer-mipi-12grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_12RGGB[] = "bayer-mipi-12rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_12BGGR[] = "bayer-mipi-12bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_14GBRG[] = "bayer-mipi-14gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_14GRBG[] = "bayer-mipi-14grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_14RGGB[] = "bayer-mipi-14rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_MIPI_RAW_14BGGR[] = "bayer-mipi-14bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_8GBRG[] = "bayer-ideal-qcom-8gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_8GRBG[] = "bayer-ideal-qcom-8grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_8RGGB[] = "bayer-ideal-qcom-8rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_8BGGR[] = "bayer-ideal-qcom-8bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_10GBRG[] = "bayer-ideal-qcom-10gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_10GRBG[] = "bayer-ideal-qcom-10grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_10RGGB[] = "bayer-ideal-qcom-10rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_10BGGR[] = "bayer-ideal-qcom-10bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_12GBRG[] = "bayer-ideal-qcom-12gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_12GRBG[] = "bayer-ideal-qcom-12grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_12RGGB[] = "bayer-ideal-qcom-12rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_12BGGR[] = "bayer-ideal-qcom-12bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_14GBRG[] = "bayer-ideal-qcom-14gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_14GRBG[] = "bayer-ideal-qcom-14grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_14RGGB[] = "bayer-ideal-qcom-14rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_14BGGR[] = "bayer-ideal-qcom-14bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_8GBRG[] = "bayer-ideal-mipi-8gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_8GRBG[] = "bayer-ideal-mipi-8grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_8RGGB[] = "bayer-ideal-mipi-8rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_8BGGR[] = "bayer-ideal-mipi-8bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_10GBRG[] = "bayer-ideal-mipi-10gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_10GRBG[] = "bayer-ideal-mipi-10grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_10RGGB[] = "bayer-ideal-mipi-10rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_10BGGR[] = "bayer-ideal-mipi-10bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_12GBRG[] = "bayer-ideal-mipi-12gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_12GRBG[] = "bayer-ideal-mipi-12grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_12RGGB[] = "bayer-ideal-mipi-12rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_12BGGR[] = "bayer-ideal-mipi-12bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_14GBRG[] = "bayer-ideal-mipi-14gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_14GRBG[] = "bayer-ideal-mipi-14grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_14RGGB[] = "bayer-ideal-mipi-14rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_14BGGR[] = "bayer-ideal-mipi-14bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN8_8GBRG[] = "bayer-ideal-plain8-8gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN8_8GRBG[] = "bayer-ideal-plain8-8grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN8_8RGGB[] = "bayer-ideal-plain8-8rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN8_8BGGR[] = "bayer-ideal-plain8-8bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_8GBRG[] = "bayer-ideal-plain16-8gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_8GRBG[] = "bayer-ideal-plain16-8grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_8RGGB[] = "bayer-ideal-plain16-8rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_8BGGR[] = "bayer-ideal-plain16-8bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_10GBRG[] = "bayer-ideal-plain16-10gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_10GRBG[] = "bayer-ideal-plain16-10grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_10RGGB[] = "bayer-ideal-plain16-10rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_10BGGR[] = "bayer-ideal-plain16-10bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_12GBRG[] = "bayer-ideal-plain16-12gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_12GRBG[] = "bayer-ideal-plain16-12grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_12RGGB[] = "bayer-ideal-plain16-12rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_12BGGR[] = "bayer-ideal-plain16-12bggr";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_14GBRG[] = "bayer-ideal-plain16-14gbrg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_14GRBG[] = "bayer-ideal-plain16-14grbg";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_14RGGB[] = "bayer-ideal-plain16-14rggb";
const char QCameraParameters::QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_14BGGR[] = "bayer-ideal-plain16-14bggr";

// Values for ISO Settings
const char QCameraParameters::ISO_AUTO[] = "auto";
const char QCameraParameters::ISO_100[] = "ISO100";
const char QCameraParameters::ISO_200[] = "ISO200";
const char QCameraParameters::ISO_400[] = "ISO400";
const char QCameraParameters::ISO_800[] = "ISO800";
const char QCameraParameters::ISO_1600[] = "ISO1600";
const char QCameraParameters::ISO_3200[] = "ISO3200";
const char QCameraParameters::ISO_MANUAL[] = "manual";


// Values for auto exposure settings.
const char QCameraParameters::AUTO_EXPOSURE_FRAME_AVG[] = "frame-average";
const char QCameraParameters::AUTO_EXPOSURE_CENTER_WEIGHTED[] = "center-weighted";
const char QCameraParameters::AUTO_EXPOSURE_SPOT_METERING[] = "spot-metering";
const char QCameraParameters::AUTO_EXPOSURE_SMART_METERING[] = "smart-metering";
const char QCameraParameters::AUTO_EXPOSURE_USER_METERING[] = "user-metering";
const char QCameraParameters::AUTO_EXPOSURE_SPOT_METERING_ADV[] = "spot-metering-adv";
const char QCameraParameters::AUTO_EXPOSURE_CENTER_WEIGHTED_ADV[] = "center-weighted-adv";

// Values for instant AEC modes
const char QCameraParameters::KEY_QC_INSTANT_AEC_DISABLE[] = "0";
const char QCameraParameters::KEY_QC_INSTANT_AEC_AGGRESSIVE_AEC[] = "1";
const char QCameraParameters::KEY_QC_INSTANT_AEC_FAST_AEC[] = "2";

// Values for instant capture modes
const char QCameraParameters::KEY_QC_INSTANT_CAPTURE_DISABLE[] = "0";
const char QCameraParameters::KEY_QC_INSTANT_CAPTURE_AGGRESSIVE_AEC[] = "1";
const char QCameraParameters::KEY_QC_INSTANT_CAPTURE_FAST_AEC[] = "2";

const char QCameraParameters::KEY_QC_GPS_LATITUDE_REF[] = "gps-latitude-ref";
const char QCameraParameters::KEY_QC_GPS_LONGITUDE_REF[] = "gps-longitude-ref";
const char QCameraParameters::KEY_QC_GPS_ALTITUDE_REF[] = "gps-altitude-ref";
const char QCameraParameters::KEY_QC_GPS_STATUS[] = "gps-status";

const char QCameraParameters::KEY_QC_HISTOGRAM[] = "histogram";
const char QCameraParameters::KEY_QC_SUPPORTED_HISTOGRAM_MODES[] = "histogram-values";

const char QCameraParameters::VALUE_ENABLE[] = "enable";
const char QCameraParameters::VALUE_DISABLE[] = "disable";
const char QCameraParameters::VALUE_OFF[] = "off";
const char QCameraParameters::VALUE_ON[] = "on";
const char QCameraParameters::VALUE_TRUE[] = "true";
const char QCameraParameters::VALUE_FALSE[] = "false";

const char QCameraParameters::VALUE_FAST[] = "fast";
const char QCameraParameters::VALUE_HIGH_QUALITY[] = "high-quality";

const char QCameraParameters::KEY_QC_SHARPNESS[] = "sharpness";
const char QCameraParameters::KEY_QC_MIN_SHARPNESS[] = "min-sharpness";
const char QCameraParameters::KEY_QC_MAX_SHARPNESS[] = "max-sharpness";
const char QCameraParameters::KEY_QC_SHARPNESS_STEP[] = "sharpness-step";
const char QCameraParameters::KEY_QC_CONTRAST[] = "contrast";
const char QCameraParameters::KEY_QC_MIN_CONTRAST[] = "min-contrast";
const char QCameraParameters::KEY_QC_MAX_CONTRAST[] = "max-contrast";
const char QCameraParameters::KEY_QC_CONTRAST_STEP[] = "contrast-step";
const char QCameraParameters::KEY_QC_SATURATION[] = "saturation";
const char QCameraParameters::KEY_QC_MIN_SATURATION[] = "min-saturation";
const char QCameraParameters::KEY_QC_MAX_SATURATION[] = "max-saturation";
const char QCameraParameters::KEY_QC_SATURATION_STEP[] = "saturation-step";
const char QCameraParameters::KEY_QC_BRIGHTNESS[] = "luma-adaptation";
const char QCameraParameters::KEY_QC_MIN_BRIGHTNESS[] = "min-brightness";
const char QCameraParameters::KEY_QC_MAX_BRIGHTNESS[] = "max-brightness";
const char QCameraParameters::KEY_QC_BRIGHTNESS_STEP[] = "brightness-step";
const char QCameraParameters::KEY_QC_SCE_FACTOR[] = "skinToneEnhancement";
const char QCameraParameters::KEY_QC_MIN_SCE_FACTOR[] = "min-sce-factor";
const char QCameraParameters::KEY_QC_MAX_SCE_FACTOR[] = "max-sce-factor";
const char QCameraParameters::KEY_QC_SCE_FACTOR_STEP[] = "sce-factor-step";

const char QCameraParameters::KEY_QC_MAX_NUM_REQUESTED_FACES[] = "qc-max-num-requested-faces";

//Values for DENOISE
const char QCameraParameters::DENOISE_OFF[] = "denoise-off";
const char QCameraParameters::DENOISE_ON[] = "denoise-on";

// Values for selectable zone af Settings
const char QCameraParameters::FOCUS_ALGO_AUTO[] = "auto";
const char QCameraParameters::FOCUS_ALGO_SPOT_METERING[] = "spot-metering";
const char QCameraParameters::FOCUS_ALGO_CENTER_WEIGHTED[] = "center-weighted";
const char QCameraParameters::FOCUS_ALGO_FRAME_AVERAGE[] = "frame-average";

// Values for HFR settings.
const char QCameraParameters::VIDEO_HFR_OFF[] = "off";
const char QCameraParameters::VIDEO_HFR_2X[] = "60";
const char QCameraParameters::VIDEO_HFR_3X[] = "90";
const char QCameraParameters::VIDEO_HFR_4X[] = "120";
const char QCameraParameters::VIDEO_HFR_5X[] = "150";
const char QCameraParameters::VIDEO_HFR_6X[] = "180";
const char QCameraParameters::VIDEO_HFR_7X[] = "210";
const char QCameraParameters::VIDEO_HFR_8X[] = "240";
const char QCameraParameters::VIDEO_HFR_9X[] = "480";

// Values for HDR Bracketing settings.
const char QCameraParameters::AE_BRACKET_OFF[] = "Off";
const char QCameraParameters::AE_BRACKET[] = "AE-Bracket";

// Values for AF Bracketing setting.
const char QCameraParameters::AF_BRACKET_OFF[] = "af-bracket-off";
const char QCameraParameters::AF_BRACKET_ON[] = "af-bracket-on";

// Values for Refocus setting.
const char QCameraParameters::RE_FOCUS_OFF[] = "re-focus-off";
const char QCameraParameters::RE_FOCUS_ON[] = "re-focus-on";

// Values for Chroma Flash setting.
const char QCameraParameters::CHROMA_FLASH_OFF[] = "chroma-flash-off";
const char QCameraParameters::CHROMA_FLASH_ON[] = "chroma-flash-on";

// Values for Opti Zoom setting.
const char QCameraParameters::OPTI_ZOOM_OFF[] = "opti-zoom-off";
const char QCameraParameters::OPTI_ZOOM_ON[] = "opti-zoom-on";

// Values for Still More setting.
const char QCameraParameters::STILL_MORE_OFF[] = "still-more-off";
const char QCameraParameters::STILL_MORE_ON[] = "still-more-on";

// Values for HDR mode setting.
const char QCameraParameters::HDR_MODE_SENSOR[] = "hdr-mode-sensor";
const char QCameraParameters::HDR_MODE_MULTI_FRAME[] = "hdr-mode-multiframe";

// Values for True Portrait setting.
const char QCameraParameters::TRUE_PORTRAIT_OFF[] = "true-portrait-off";
const char QCameraParameters::TRUE_PORTRAIT_ON[] = "true-portrait-on";

// Values for FLIP settings.
const char QCameraParameters::FLIP_MODE_OFF[] = "off";
const char QCameraParameters::FLIP_MODE_V[] = "flip-v";
const char QCameraParameters::FLIP_MODE_H[] = "flip-h";
const char QCameraParameters::FLIP_MODE_VH[] = "flip-vh";

const char QCameraParameters::CDS_MODE_OFF[] = "off";
const char QCameraParameters::CDS_MODE_ON[] = "on";
const char QCameraParameters::CDS_MODE_AUTO[] = "auto";

// Values for video rotation settings.
const char QCameraParameters::VIDEO_ROTATION_0[] = "0";
const char QCameraParameters::VIDEO_ROTATION_90[] = "90";
const char QCameraParameters::VIDEO_ROTATION_180[] = "180";
const char QCameraParameters::VIDEO_ROTATION_270[] = "270";

const char QCameraParameters::KEY_QC_SUPPORTED_MANUAL_FOCUS_MODES[] = "manual-focus-modes";
const char QCameraParameters::KEY_QC_SUPPORTED_MANUAL_EXPOSURE_MODES[] = "manual-exposure-modes";
const char QCameraParameters::KEY_QC_SUPPORTED_MANUAL_WB_MODES[] = "manual-wb-modes";
const char QCameraParameters::KEY_QC_FOCUS_SCALE_MODE[] = "scale-mode";
const char QCameraParameters::KEY_QC_FOCUS_DIOPTER_MODE[] = "diopter-mode";
const char QCameraParameters::KEY_QC_ISO_PRIORITY[] = "iso-priority";
const char QCameraParameters::KEY_QC_EXP_TIME_PRIORITY[] = "exp-time-priority";
const char QCameraParameters::KEY_QC_USER_SETTING[] = "user-setting";
const char QCameraParameters::KEY_QC_WB_CCT_MODE[] = "color-temperature";
const char QCameraParameters::KEY_QC_WB_GAIN_MODE[] = "rbgb-gains";
const char QCameraParameters::KEY_QC_NOISE_REDUCTION_MODE[] = "noise-reduction-mode";
const char QCameraParameters::KEY_QC_NOISE_REDUCTION_MODE_VALUES[] = "noise-reduction-mode-values";

#ifdef TARGET_TS_MAKEUP
const char QCameraParameters::KEY_TS_MAKEUP[] = "tsmakeup";
const char QCameraParameters::KEY_TS_MAKEUP_WHITEN[] = "tsmakeup_whiten";
const char QCameraParameters::KEY_TS_MAKEUP_CLEAN[] = "tsmakeup_clean";
#endif

//KEY to share HFR batch size with video encoder.
const char QCameraParameters::KEY_QC_VIDEO_BATCH_SIZE[] = "video-batch-size";

static const char* portrait = "portrait";
static const char* landscape = "landscape";

const cam_dimension_t QCameraParameters::THUMBNAIL_SIZES_MAP[] = {
    { 256, 154 }, //1.66233
    { 240, 160 }, //1.5
    { 320, 320 }, //1.0
    { 320, 240 }, //1.33333
    { 256, 144 }, //1.777778
    { 240, 144 }, //1.666667
    { 176, 144 }, //1.222222
    /*Thumbnail sizes to match portrait picture size aspect ratio*/
    { 240, 320 }, //to match 480X640 & 240X320 picture size
    { 144, 176 }, //to match 144X176  picture size
    { 0, 0 }      // required by Android SDK
};

const QCameraParameters::QCameraMap<cam_auto_exposure_mode_type>
        QCameraParameters::AUTO_EXPOSURE_MAP[] = {
    { AUTO_EXPOSURE_FRAME_AVG,           CAM_AEC_MODE_FRAME_AVERAGE },
    { AUTO_EXPOSURE_CENTER_WEIGHTED,     CAM_AEC_MODE_CENTER_WEIGHTED },
    { AUTO_EXPOSURE_SPOT_METERING,       CAM_AEC_MODE_SPOT_METERING },
    { AUTO_EXPOSURE_SMART_METERING,      CAM_AEC_MODE_SMART_METERING },
    { AUTO_EXPOSURE_USER_METERING,       CAM_AEC_MODE_USER_METERING },
    { AUTO_EXPOSURE_SPOT_METERING_ADV,   CAM_AEC_MODE_SPOT_METERING_ADV },
    { AUTO_EXPOSURE_CENTER_WEIGHTED_ADV, CAM_AEC_MODE_CENTER_WEIGHTED_ADV },
};

const QCameraParameters::QCameraMap<cam_aec_convergence_type>
        QCameraParameters::INSTANT_AEC_MODES_MAP[] = {
    { KEY_QC_INSTANT_AEC_DISABLE,        CAM_AEC_NORMAL_CONVERGENCE },
    { KEY_QC_INSTANT_AEC_AGGRESSIVE_AEC, CAM_AEC_AGGRESSIVE_CONVERGENCE },
    { KEY_QC_INSTANT_AEC_FAST_AEC,       CAM_AEC_FAST_CONVERGENCE },
};

const QCameraParameters::QCameraMap<cam_aec_convergence_type>
        QCameraParameters::INSTANT_CAPTURE_MODES_MAP[] = {
    { KEY_QC_INSTANT_CAPTURE_DISABLE,        CAM_AEC_NORMAL_CONVERGENCE },
    { KEY_QC_INSTANT_CAPTURE_AGGRESSIVE_AEC, CAM_AEC_AGGRESSIVE_CONVERGENCE },
    { KEY_QC_INSTANT_CAPTURE_FAST_AEC,       CAM_AEC_FAST_CONVERGENCE },
};

const QCameraParameters::QCameraMap<cam_format_t>
        QCameraParameters::PREVIEW_FORMATS_MAP[] = {
    {PIXEL_FORMAT_YUV420SP,        CAM_FORMAT_YUV_420_NV21},
    {PIXEL_FORMAT_YUV420P,         CAM_FORMAT_YUV_420_YV12},
    {PIXEL_FORMAT_YUV420SP_ADRENO, CAM_FORMAT_YUV_420_NV21_ADRENO},
    {PIXEL_FORMAT_YV12,            CAM_FORMAT_YUV_420_YV12},
    {PIXEL_FORMAT_NV12,            CAM_FORMAT_YUV_420_NV12},
    {QC_PIXEL_FORMAT_NV12_VENUS,   CAM_FORMAT_YUV_420_NV12_VENUS}
};

const QCameraParameters::QCameraMap<cam_format_t>
        QCameraParameters::PICTURE_TYPES_MAP[] = {
    {PIXEL_FORMAT_JPEG,                          CAM_FORMAT_JPEG},
    {PIXEL_FORMAT_YUV420SP,                      CAM_FORMAT_YUV_420_NV21},
    {PIXEL_FORMAT_YUV422SP,                      CAM_FORMAT_YUV_422_NV16},
    {QC_PIXEL_FORMAT_YUV_RAW_8BIT_YUYV,          CAM_FORMAT_YUV_RAW_8BIT_YUYV},
    {QC_PIXEL_FORMAT_YUV_RAW_8BIT_YVYU,          CAM_FORMAT_YUV_RAW_8BIT_YVYU},
    {QC_PIXEL_FORMAT_YUV_RAW_8BIT_UYVY,          CAM_FORMAT_YUV_RAW_8BIT_UYVY},
    {QC_PIXEL_FORMAT_YUV_RAW_8BIT_VYUY,          CAM_FORMAT_YUV_RAW_8BIT_VYUY},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_8GBRG,       CAM_FORMAT_BAYER_QCOM_RAW_8BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_8GRBG,       CAM_FORMAT_BAYER_QCOM_RAW_8BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_8RGGB,       CAM_FORMAT_BAYER_QCOM_RAW_8BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_8BGGR,       CAM_FORMAT_BAYER_QCOM_RAW_8BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_10GBRG,      CAM_FORMAT_BAYER_QCOM_RAW_10BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_10GRBG,      CAM_FORMAT_BAYER_QCOM_RAW_10BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_10RGGB,      CAM_FORMAT_BAYER_QCOM_RAW_10BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_10BGGR,      CAM_FORMAT_BAYER_QCOM_RAW_10BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_12GBRG,      CAM_FORMAT_BAYER_QCOM_RAW_12BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_12GRBG,      CAM_FORMAT_BAYER_QCOM_RAW_12BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_12RGGB,      CAM_FORMAT_BAYER_QCOM_RAW_12BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_12BGGR,      CAM_FORMAT_BAYER_QCOM_RAW_12BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_14GBRG,      CAM_FORMAT_BAYER_QCOM_RAW_14BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_14GRBG,      CAM_FORMAT_BAYER_QCOM_RAW_14BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_14RGGB,      CAM_FORMAT_BAYER_QCOM_RAW_14BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_QCOM_RAW_14BGGR,      CAM_FORMAT_BAYER_QCOM_RAW_14BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_8GBRG,       CAM_FORMAT_BAYER_MIPI_RAW_8BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_8GRBG,       CAM_FORMAT_BAYER_MIPI_RAW_8BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_8RGGB,       CAM_FORMAT_BAYER_MIPI_RAW_8BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_8BGGR,       CAM_FORMAT_BAYER_MIPI_RAW_8BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_10GBRG,      CAM_FORMAT_BAYER_MIPI_RAW_10BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_10GRBG,      CAM_FORMAT_BAYER_MIPI_RAW_10BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_10RGGB,      CAM_FORMAT_BAYER_MIPI_RAW_10BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_10BGGR,      CAM_FORMAT_BAYER_MIPI_RAW_10BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_12GBRG,      CAM_FORMAT_BAYER_MIPI_RAW_12BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_12GRBG,      CAM_FORMAT_BAYER_MIPI_RAW_12BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_12RGGB,      CAM_FORMAT_BAYER_MIPI_RAW_12BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_12BGGR,      CAM_FORMAT_BAYER_MIPI_RAW_12BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_14GBRG,      CAM_FORMAT_BAYER_MIPI_RAW_14BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_14GRBG,      CAM_FORMAT_BAYER_MIPI_RAW_14BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_14RGGB,      CAM_FORMAT_BAYER_MIPI_RAW_14BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_MIPI_RAW_14BGGR,      CAM_FORMAT_BAYER_MIPI_RAW_14BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_8GBRG,     CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_8BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_8GRBG,     CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_8BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_8RGGB,     CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_8BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_8BGGR,     CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_8BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_10GBRG,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_10BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_10GRBG,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_10BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_10RGGB,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_10BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_10BGGR,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_10BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_12GBRG,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_12BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_12GRBG,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_12BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_12RGGB,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_12BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_12BGGR,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_12BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_14GBRG,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_14BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_14GRBG,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_14BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_14RGGB,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_14BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_QCOM_14BGGR,    CAM_FORMAT_BAYER_IDEAL_RAW_QCOM_14BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_8GBRG,     CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_8BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_8GRBG,     CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_8BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_8RGGB,     CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_8BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_8BGGR,     CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_8BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_10GBRG,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_10BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_10GRBG,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_10BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_10RGGB,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_10BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_10BGGR,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_10BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_12GBRG,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_12BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_12GRBG,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_12BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_12RGGB,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_12BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_12BGGR,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_12BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_14GBRG,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_14BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_14GRBG,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_14BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_14RGGB,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_14BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_MIPI_14BGGR,    CAM_FORMAT_BAYER_IDEAL_RAW_MIPI_14BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN8_8GBRG,   CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN8_8BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN8_8GRBG,   CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN8_8BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN8_8RGGB,   CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN8_8BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN8_8BGGR,   CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN8_8BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_8GBRG,  CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_8BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_8GRBG,  CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_8BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_8RGGB,  CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_8BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_8BGGR,  CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_8BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_10GBRG, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_10BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_10GRBG, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_10BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_10RGGB, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_10BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_10BGGR, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_10BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_12GBRG, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_12BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_12GRBG, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_12BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_12RGGB, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_12BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_12BGGR, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_12BPP_BGGR},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_14GBRG, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_14BPP_GBRG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_14GRBG, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_14BPP_GRBG},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_14RGGB, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_14BPP_RGGB},
    {QC_PIXEL_FORMAT_BAYER_IDEAL_PLAIN16_14BGGR, CAM_FORMAT_BAYER_IDEAL_RAW_PLAIN16_14BPP_BGGR}
};

const QCameraParameters::QCameraMap<cam_focus_mode_type>
        QCameraParameters::FOCUS_MODES_MAP[] = {
    { FOCUS_MODE_AUTO,               CAM_FOCUS_MODE_AUTO },
    { FOCUS_MODE_INFINITY,           CAM_FOCUS_MODE_INFINITY },
    { FOCUS_MODE_MACRO,              CAM_FOCUS_MODE_MACRO },
    { FOCUS_MODE_FIXED,              CAM_FOCUS_MODE_FIXED },
    { FOCUS_MODE_EDOF,               CAM_FOCUS_MODE_EDOF },
    { FOCUS_MODE_CONTINUOUS_PICTURE, CAM_FOCUS_MODE_CONTINOUS_PICTURE },
    { FOCUS_MODE_CONTINUOUS_VIDEO,   CAM_FOCUS_MODE_CONTINOUS_VIDEO },
    { FOCUS_MODE_MANUAL_POSITION,    CAM_FOCUS_MODE_MANUAL},
};

const QCameraParameters::QCameraMap<cam_effect_mode_type>
        QCameraParameters::EFFECT_MODES_MAP[] = {
    { EFFECT_NONE,       CAM_EFFECT_MODE_OFF },
    { EFFECT_MONO,       CAM_EFFECT_MODE_MONO },
    { EFFECT_NEGATIVE,   CAM_EFFECT_MODE_NEGATIVE },
    { EFFECT_SOLARIZE,   CAM_EFFECT_MODE_SOLARIZE },
    { EFFECT_SEPIA,      CAM_EFFECT_MODE_SEPIA },
    { EFFECT_POSTERIZE,  CAM_EFFECT_MODE_POSTERIZE },
    { EFFECT_WHITEBOARD, CAM_EFFECT_MODE_WHITEBOARD },
    { EFFECT_BLACKBOARD, CAM_EFFECT_MODE_BLACKBOARD },
    { EFFECT_AQUA,       CAM_EFFECT_MODE_AQUA },
    { EFFECT_EMBOSS,     CAM_EFFECT_MODE_EMBOSS },
    { EFFECT_SKETCH,     CAM_EFFECT_MODE_SKETCH },
    { EFFECT_NEON,       CAM_EFFECT_MODE_NEON },
    { EFFECT_BEAUTY,     CAM_EFFECT_MODE_BEAUTY }
};

const QCameraParameters::QCameraMap<cam_scene_mode_type>
        QCameraParameters::SCENE_MODES_MAP[] = {
    { SCENE_MODE_AUTO,           CAM_SCENE_MODE_OFF },
    { SCENE_MODE_ACTION,         CAM_SCENE_MODE_ACTION },
    { SCENE_MODE_PORTRAIT,       CAM_SCENE_MODE_PORTRAIT },
    { SCENE_MODE_LANDSCAPE,      CAM_SCENE_MODE_LANDSCAPE },
    { SCENE_MODE_NIGHT,          CAM_SCENE_MODE_NIGHT },
    { SCENE_MODE_NIGHT_PORTRAIT, CAM_SCENE_MODE_NIGHT_PORTRAIT },
    { SCENE_MODE_THEATRE,        CAM_SCENE_MODE_THEATRE },
    { SCENE_MODE_BEACH,          CAM_SCENE_MODE_BEACH },
    { SCENE_MODE_SNOW,           CAM_SCENE_MODE_SNOW },
    { SCENE_MODE_SUNSET,         CAM_SCENE_MODE_SUNSET },
    { SCENE_MODE_STEADYPHOTO,    CAM_SCENE_MODE_ANTISHAKE },
    { SCENE_MODE_FIREWORKS ,     CAM_SCENE_MODE_FIREWORKS },
    { SCENE_MODE_SPORTS ,        CAM_SCENE_MODE_SPORTS },
    { SCENE_MODE_PARTY,          CAM_SCENE_MODE_PARTY },
    { SCENE_MODE_CANDLELIGHT,    CAM_SCENE_MODE_CANDLELIGHT },
    { SCENE_MODE_ASD,            CAM_SCENE_MODE_AUTO },
    { SCENE_MODE_BACKLIGHT,      CAM_SCENE_MODE_BACKLIGHT },
    { SCENE_MODE_FLOWERS,        CAM_SCENE_MODE_FLOWERS },
    { SCENE_MODE_AR,             CAM_SCENE_MODE_AR },
    { SCENE_MODE_HDR,            CAM_SCENE_MODE_HDR },
};

const QCameraParameters::QCameraMap<cam_flash_mode_t>
        QCameraParameters::FLASH_MODES_MAP[] = {
    { FLASH_MODE_OFF,   CAM_FLASH_MODE_OFF },
    { FLASH_MODE_AUTO,  CAM_FLASH_MODE_AUTO },
    { FLASH_MODE_ON,    CAM_FLASH_MODE_ON },
    { FLASH_MODE_TORCH, CAM_FLASH_MODE_TORCH }
};

const QCameraParameters::QCameraMap<cam_focus_algorithm_type>
         QCameraParameters::FOCUS_ALGO_MAP[] = {
    { FOCUS_ALGO_AUTO,            CAM_FOCUS_ALGO_AUTO },
    { FOCUS_ALGO_SPOT_METERING,   CAM_FOCUS_ALGO_SPOT },
    { FOCUS_ALGO_CENTER_WEIGHTED, CAM_FOCUS_ALGO_CENTER_WEIGHTED },
    { FOCUS_ALGO_FRAME_AVERAGE,   CAM_FOCUS_ALGO_AVERAGE }
};

const QCameraParameters::QCameraMap<cam_wb_mode_type>
        QCameraParameters::WHITE_BALANCE_MODES_MAP[] = {
    { WHITE_BALANCE_AUTO,            CAM_WB_MODE_AUTO },
    { WHITE_BALANCE_INCANDESCENT,    CAM_WB_MODE_INCANDESCENT },
    { WHITE_BALANCE_FLUORESCENT,     CAM_WB_MODE_FLUORESCENT },
    { WHITE_BALANCE_WARM_FLUORESCENT,CAM_WB_MODE_WARM_FLUORESCENT},
    { WHITE_BALANCE_DAYLIGHT,        CAM_WB_MODE_DAYLIGHT },
    { WHITE_BALANCE_CLOUDY_DAYLIGHT, CAM_WB_MODE_CLOUDY_DAYLIGHT },
    { WHITE_BALANCE_TWILIGHT,        CAM_WB_MODE_TWILIGHT },
    { WHITE_BALANCE_SHADE,           CAM_WB_MODE_SHADE },
    { WHITE_BALANCE_MANUAL,          CAM_WB_MODE_MANUAL},
};

const QCameraParameters::QCameraMap<cam_antibanding_mode_type>
        QCameraParameters::ANTIBANDING_MODES_MAP[] = {
    { ANTIBANDING_OFF,  CAM_ANTIBANDING_MODE_OFF },
    { ANTIBANDING_50HZ, CAM_ANTIBANDING_MODE_50HZ },
    { ANTIBANDING_60HZ, CAM_ANTIBANDING_MODE_60HZ },
    { ANTIBANDING_AUTO, CAM_ANTIBANDING_MODE_AUTO }
};

const QCameraParameters::QCameraMap<cam_iso_mode_type>
        QCameraParameters::ISO_MODES_MAP[] = {
    { ISO_AUTO,  CAM_ISO_MODE_AUTO },
    { ISO_HJR,   CAM_ISO_MODE_DEBLUR },
    { ISO_100,   CAM_ISO_MODE_100 },
    { ISO_200,   CAM_ISO_MODE_200 },
    { ISO_400,   CAM_ISO_MODE_400 },
    { ISO_800,   CAM_ISO_MODE_800 },
    { ISO_1600,  CAM_ISO_MODE_1600 },
    { ISO_3200,  CAM_ISO_MODE_3200 }
};

const QCameraParameters::QCameraMap<cam_hfr_mode_t>
        QCameraParameters::HFR_MODES_MAP[] = {
    { VIDEO_HFR_OFF, CAM_HFR_MODE_OFF },
    { VIDEO_HFR_2X, CAM_HFR_MODE_60FPS },
    { VIDEO_HFR_3X, CAM_HFR_MODE_90FPS },
    { VIDEO_HFR_4X, CAM_HFR_MODE_120FPS },
    { VIDEO_HFR_5X, CAM_HFR_MODE_150FPS },
    { VIDEO_HFR_6X, CAM_HFR_MODE_180FPS },
    { VIDEO_HFR_7X, CAM_HFR_MODE_210FPS },
    { VIDEO_HFR_8X, CAM_HFR_MODE_240FPS },
    { VIDEO_HFR_9X, CAM_HFR_MODE_480FPS }
};

const QCameraParameters::QCameraMap<cam_bracket_mode>
        QCameraParameters::BRACKETING_MODES_MAP[] = {
    { AE_BRACKET_OFF, CAM_EXP_BRACKETING_OFF },
    { AE_BRACKET,     CAM_EXP_BRACKETING_ON }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::ON_OFF_MODES_MAP[] = {
    { VALUE_OFF, 0 },
    { VALUE_ON,  1 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::TOUCH_AF_AEC_MODES_MAP[] = {
    { QCameraParameters::TOUCH_AF_AEC_OFF, 0 },
    { QCameraParameters::TOUCH_AF_AEC_ON, 1 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::ENABLE_DISABLE_MODES_MAP[] = {
    { VALUE_ENABLE,  1 },
    { VALUE_DISABLE, 0 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::DENOISE_ON_OFF_MODES_MAP[] = {
    { DENOISE_OFF, 0 },
    { DENOISE_ON,  1 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::TRUE_FALSE_MODES_MAP[] = {
    { VALUE_FALSE, 0},
    { VALUE_TRUE,  1}
};

const QCameraParameters::QCameraMap<cam_flip_t>
        QCameraParameters::FLIP_MODES_MAP[] = {
    {FLIP_MODE_OFF, FLIP_NONE},
    {FLIP_MODE_V, FLIP_V},
    {FLIP_MODE_H, FLIP_H},
    {FLIP_MODE_VH, FLIP_V_H}
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::AF_BRACKETING_MODES_MAP[] = {
    { AF_BRACKET_OFF, 0 },
    { AF_BRACKET_ON,  1 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::RE_FOCUS_MODES_MAP[] = {
    { RE_FOCUS_OFF, 0 },
    { RE_FOCUS_ON,  1 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::CHROMA_FLASH_MODES_MAP[] = {
    { CHROMA_FLASH_OFF, 0 },
    { CHROMA_FLASH_ON,  1 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::OPTI_ZOOM_MODES_MAP[] = {
    { OPTI_ZOOM_OFF, 0 },
    { OPTI_ZOOM_ON,  1 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::TRUE_PORTRAIT_MODES_MAP[] = {
    { TRUE_PORTRAIT_OFF, 0 },
    { TRUE_PORTRAIT_ON,  1 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::STILL_MORE_MODES_MAP[] = {
    { STILL_MORE_OFF, 0 },
    { STILL_MORE_ON,  1 }
};

const QCameraParameters::QCameraMap<cam_cds_mode_type_t>
        QCameraParameters::CDS_MODES_MAP[] = {
    { CDS_MODE_OFF, CAM_CDS_MODE_OFF },
    { CDS_MODE_ON, CAM_CDS_MODE_ON },
    { CDS_MODE_AUTO, CAM_CDS_MODE_AUTO}
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::HDR_MODES_MAP[] = {
    { HDR_MODE_SENSOR, 0 },
    { HDR_MODE_MULTI_FRAME, 1 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::VIDEO_ROTATION_MODES_MAP[] = {
    { VIDEO_ROTATION_0, 0 },
    { VIDEO_ROTATION_90, 90 },
    { VIDEO_ROTATION_180, 180 },
    { VIDEO_ROTATION_270, 270 }
};

const QCameraParameters::QCameraMap<int>
        QCameraParameters::NOISE_REDUCTION_MODES_MAP[] = {
    { VALUE_OFF, 0 },
    { VALUE_FAST,  1 },
    { VALUE_HIGH_QUALITY,  2 }
};

#define DEFAULT_CAMERA_AREA "(0, 0, 0, 0, 0)"
#define DATA_PTR(MEM_OBJ,INDEX) MEM_OBJ->getPtr( INDEX )
#define TOTAL_RAM_SIZE_512MB 536870912
#define PARAM_MAP_SIZE(MAP) (sizeof(MAP)/sizeof(MAP[0]))

/*===========================================================================
 * FUNCTION   : isOEMFeat1PropEnabled
 *
 * DESCRIPTION: inline function to check from property if custom feature
 *            is enabled
 *
 * PARAMETERS : none
 *
 * RETURN     : boolean true/false
 *==========================================================================*/
static inline bool isOEMFeat1PropEnabled()
{
    char value[PROPERTY_VALUE_MAX];
    property_get("persist.camera.imglib.oemfeat1", value, "0");
    return atoi(value) > 0 ? true : false;
}

/*===========================================================================
 * FUNCTION   : QCameraParameters
 *
 * DESCRIPTION: default constructor of QCameraParameters
 *
 * PARAMETERS : none
 *
 * RETURN     : None
 *==========================================================================*/
QCameraParameters::QCameraParameters()
    : CameraParameters(),
      m_reprocScaleParam(),
      mCommon(),
      m_pCapability(NULL),
      m_pCamOpsTbl(NULL),
      m_pParamHeap(NULL),
      m_pParamBuf(NULL),
      m_pRelCamSyncHeap(NULL),
      m_pRelCamSyncBuf(NULL),
      m_bFrameSyncEnabled(false),
      mIsType(IS_TYPE_NONE),
      m_bZslMode(false),
      m_bZslMode_new(false),
      m_bForceZslMode(false),
      m_bRecordingHint(false),
      m_bRecordingHint_new(false),
      m_bHistogramEnabled(false),
      m_bLongshotEnabled(false),
      m_nFaceProcMask(0),
      m_bFaceDetectionOn(0),
      m_bDebugFps(false),
      mFocusMode(CAM_FOCUS_MODE_MAX),
      mPreviewFormat(CAM_FORMAT_YUV_420_NV21),
      mAppPreviewFormat(CAM_FORMAT_YUV_420_NV21),
      mPictureFormat(CAM_FORMAT_JPEG),
      m_bNeedRestart(false),
      m_bNoDisplayMode(false),
      m_bWNROn(false),
      m_bTNRPreviewOn(false),
      m_bTNRVideoOn(false),
      m_bTNRSnapshotOn(false),
      m_bInited(false),
      m_nRetroBurstNum(0),
      m_nBurstLEDOnPeriod(100),
      m_bUpdateEffects(false),
      m_bSceneTransitionAuto(false),
      m_bPreviewFlipChanged(false),
      m_bVideoFlipChanged(false),
      m_bSnapshotFlipChanged(false),
      m_bFixedFrameRateSet(false),
      m_bHDREnabled(false),
      m_bLocalHDREnabled(false),
      m_bAVTimerEnabled(false),
      m_bDISEnabled(false),
      m_MobiMask(0),
      m_AdjustFPS(NULL),
      m_bHDR1xFrameEnabled(false),
      m_HDRSceneEnabled(false),
      m_bHDRThumbnailProcessNeeded(false),
      m_bHDR1xExtraBufferNeeded(true),
      m_bHDROutputCropEnabled(false),
      m_tempMap(),
      m_bAFBracketingOn(false),
      m_bReFocusOn(false),
      m_bChromaFlashOn(false),
      m_bOptiZoomOn(false),
      m_bSceneSelection(false),
      m_SelectedScene(CAM_SCENE_MODE_MAX),
      m_bSeeMoreOn(false),
      m_bStillMoreOn(false),
      m_bHighQualityNoiseReductionMode(false),
      m_bHfrMode(false),
      m_bSensorHDREnabled(false),
      m_bRdiMode(false),
      m_bSecureMode(false),
      m_bAeBracketingEnabled(false),
      mFlashValue(CAM_FLASH_MODE_OFF),
      mFlashDaemonValue(CAM_FLASH_MODE_OFF),
      mHfrMode(CAM_HFR_MODE_OFF),
      m_bHDRModeSensor(true),
      mOfflineRAW(false),
      m_bTruePortraitOn(false),
      m_bIsLowMemoryDevice(false),
      mCds_mode(CAM_CDS_MODE_OFF),
      m_LLCaptureEnabled(FALSE),
      m_LowLightLevel(CAM_LOW_LIGHT_OFF),
      m_bLtmForSeeMoreEnabled(false),
      m_expTime(0),
      m_isoValue(0),
      m_ManualCaptureMode(CAM_MANUAL_CAPTURE_TYPE_OFF),
      m_dualLedCalibration(0),
      m_bInstantAEC(false),
      m_bInstantCapture(false),
      mAecFrameBound(0),
      mAecSkipDisplayFrameBound(0)
{
    char value[PROPERTY_VALUE_MAX];
    // TODO: may move to parameter instead of sysprop
    property_get("persist.debug.sf.showfps", value, "0");
    m_bDebugFps = atoi(value) > 0 ? true : false;

    // For thermal mode, it should be set as system property
    // because system property applies to all applications, while
    // parameters only apply to specific app.
    property_get("persist.camera.thermal.mode", value, "fps");
    if (!strcmp(value, "frameskip")) {
        m_ThermalMode = QCAMERA_THERMAL_ADJUST_FRAMESKIP;
    } else {
        if (strcmp(value, "fps"))
            LOGW("Invalid camera thermal mode %s", value);
        m_ThermalMode = QCAMERA_THERMAL_ADJUST_FPS;
    }

    memset(value, 0, sizeof(value));
    // As per Power/Quality evaluation, LTM is enabled by default in SeeMore/StillMore usecase
    // to improve the quality as there is no much impact to power
    property_get("persist.camera.ltmforseemore", value, "1");
    m_bLtmForSeeMoreEnabled = atoi(value);

    memset(&m_LiveSnapshotSize, 0, sizeof(m_LiveSnapshotSize));
    memset(&m_default_fps_range, 0, sizeof(m_default_fps_range));
    memset(&m_hfrFpsRange, 0, sizeof(m_hfrFpsRange));
    memset(&m_stillmore_config, 0, sizeof(cam_still_more_t));
    memset(&m_captureFrameConfig, 0, sizeof(cam_capture_frame_config_t));
    memset(&m_relCamSyncInfo, 0, sizeof(cam_sync_related_sensors_event_info_t));
    mTotalPPCount = 1;
    mZoomLevel = 0;
    mParmZoomLevel = 0;
    mCurPPCount = 0;
    mBufBatchCnt = 0;
    mRotation = 0;
    mJpegRotation = 0;
    mVideoBatchSize = 0;
    m_bOEMFeatEnabled = isOEMFeat1PropEnabled();
}

/*===========================================================================
 * FUNCTION   : QCameraParameters
 *
 * DESCRIPTION: constructor of QCameraParameters
 *
 * PARAMETERS :
 *   @params  : parameters in string
 *
 * RETURN     : None
 *==========================================================================*/
QCameraParameters::QCameraParameters(const String8 &params)
    : CameraParameters(params),
    m_reprocScaleParam(),
    m_pCapability(NULL),
    m_pCamOpsTbl(NULL),
    m_pParamHeap(NULL),
    m_pParamBuf(NULL),
    m_pRelCamSyncHeap(NULL),
    m_pRelCamSyncBuf(NULL),
    m_bFrameSyncEnabled(false),
    m_bZslMode(false),
    m_bZslMode_new(false),
    m_bForceZslMode(false),
    m_bRecordingHint(false),
    m_bRecordingHint_new(false),
    m_bHistogramEnabled(false),
    m_bLongshotEnabled(false),
    m_nFaceProcMask(0),
    m_bDebugFps(false),
    mFocusMode(CAM_FOCUS_MODE_MAX),
    mPreviewFormat(CAM_FORMAT_YUV_420_NV21),
    mAppPreviewFormat(CAM_FORMAT_YUV_420_NV21),
    mPictureFormat(CAM_FORMAT_JPEG),
    m_bNeedRestart(false),
    m_bNoDisplayMode(false),
    m_bWNROn(false),
    m_bTNRPreviewOn(false),
    m_bTNRVideoOn(false),
    m_bTNRSnapshotOn(false),
    m_bInited(false),
    m_nRetroBurstNum(0),
    m_nBurstLEDOnPeriod(100),
    m_bPreviewFlipChanged(false),
    m_bVideoFlipChanged(false),
    m_bSnapshotFlipChanged(false),
    m_bFixedFrameRateSet(false),
    m_bHDREnabled(false),
    m_bLocalHDREnabled(false),
    m_bAVTimerEnabled(false),
    m_AdjustFPS(NULL),
    m_bHDR1xFrameEnabled(false),
    m_HDRSceneEnabled(false),
    m_bHDRThumbnailProcessNeeded(false),
    m_bHDR1xExtraBufferNeeded(true),
    m_bHDROutputCropEnabled(false),
    m_tempMap(),
    m_bAFBracketingOn(false),
    m_bReFocusOn(false),
    m_bChromaFlashOn(false),
    m_bOptiZoomOn(false),
    m_bSceneSelection(false),
    m_SelectedScene(CAM_SCENE_MODE_MAX),
    m_bSeeMoreOn(false),
    m_bStillMoreOn(false),
    m_bHighQualityNoiseReductionMode(false),
    m_bHfrMode(false),
    m_bSensorHDREnabled(false),
    m_bRdiMode(false),
    m_bSecureMode(false),
    m_bAeBracketingEnabled(false),
    mFlashValue(CAM_FLASH_MODE_OFF),
    mFlashDaemonValue(CAM_FLASH_MODE_OFF),
    mHfrMode(CAM_HFR_MODE_OFF),
    m_bHDRModeSensor(true),
    mOfflineRAW(false),
    m_bTruePortraitOn(false),
    m_bIsLowMemoryDevice(false),
    mCds_mode(CAM_CDS_MODE_OFF),
    mParmEffect(CAM_EFFECT_MODE_OFF),
    m_LLCaptureEnabled(FALSE),
    m_LowLightLevel(CAM_LOW_LIGHT_OFF),
    m_bLtmForSeeMoreEnabled(false),
    m_expTime(0),
    m_isoValue(0),
    m_ManualCaptureMode(CAM_MANUAL_CAPTURE_TYPE_OFF),
    m_dualLedCalibration(0),
    m_bInstantAEC(false),
    m_bInstantCapture(false),
    mAecFrameBound(0),
    mAecSkipDisplayFrameBound(0)
{
    memset(&m_LiveSnapshotSize, 0, sizeof(m_LiveSnapshotSize));
    memset(&m_default_fps_range, 0, sizeof(m_default_fps_range));
    memset(&m_hfrFpsRange, 0, sizeof(m_hfrFpsRange));
    memset(&m_stillmore_config, 0, sizeof(cam_still_more_t));
    memset(&m_relCamSyncInfo, 0, sizeof(cam_sync_related_sensors_event_info_t));
    mTotalPPCount = 0;
    mZoomLevel = 0;
    mParmZoomLevel = 0;
    mCurPPCount = 0;
    mRotation = 0;
    mJpegRotation = 0;
    mBufBatchCnt = 0;
    mVideoBatchSize = 0;
    m_bOEMFeatEnabled = isOEMFeat1PropEnabled();
}

/*===========================================================================
 * FUNCTION   : ~QCameraParameters
 *
 * DESCRIPTION: deconstructor of QCameraParameters
 *
 * PARAMETERS : none
 *
 * RETURN     : None
 *==========================================================================*/
QCameraParameters::~QCameraParameters()
{
    deinit();
}

/*===========================================================================
 * FUNCTION   : createSizesString
 *
 * DESCRIPTION: create string obj contains array of dimensions
 *
 * PARAMETERS :
 *   @sizes   : array of dimensions
 *   @len     : size of dimension array
 *
 * RETURN     : string obj
 *==========================================================================*/
String8 QCameraParameters::createSizesString(const cam_dimension_t *sizes, size_t len)
{
    String8 str;
    char buffer[32];

    if (len > 0) {
        snprintf(buffer, sizeof(buffer), "%dx%d", sizes[0].width, sizes[0].height);
        str.append(buffer);
    }
    for (size_t i = 1; i < len; i++) {
        snprintf(buffer, sizeof(buffer), ",%dx%d",
                sizes[i].width, sizes[i].height);
        str.append(buffer);
    }
    return str;
}

/*===========================================================================
 * FUNCTION   : createValuesString
 *
 * DESCRIPTION: create string obj contains array of values from map when matched
 *              from input values array
 *
 * PARAMETERS :
 *   @values  : array of values
 *   @len     : size of values array
 *   @map     : map contains the mapping between values and enums
 *   @map_len : size of the map
 *
 * RETURN     : string obj
 *==========================================================================*/
template <typename valuesType, class mapType> String8 createValuesString(
        const valuesType *values, size_t len, const mapType *map, size_t map_len)
{
    String8 str;
    int count = 0;

    for (size_t i = 0; i < len; i++ ) {
        for (size_t j = 0; j < map_len; j ++)
            if (map[j].val == values[i]) {
                if (NULL != map[j].desc) {
                    if (count > 0) {
                        str.append(",");
                    }
                    str.append(map[j].desc);
                    count++;
                    break; //loop j
                }
            }
    }
    return str;
}

/*===========================================================================
 * FUNCTION   : createValuesStringFromMap
 *
 * DESCRIPTION: create string obj contains array of values directly from map
 *
 * PARAMETERS :
 *   @map     : map contains the mapping between values and enums
 *   @map_len : size of the map
 *
 * RETURN     : string obj
 *==========================================================================*/
template <class mapType> String8 createValuesStringFromMap(
        const mapType *map, size_t map_len)
{
    String8 str;

    for (size_t i = 0; i < map_len; i++) {
        if (NULL != map[i].desc) {
            if (i > 0) {
                str.append(",");
            }
            str.append(map[i].desc);
        }
    }
    return str;
}

/*===========================================================================
 * FUNCTION   : createZoomRatioValuesString
 *
 * DESCRIPTION: create string obj contains array of zoom ratio values
 *
 * PARAMETERS :
 *   @zoomRaios  : array of zoom ratios
 *   @length     : size of the array
 *
 * RETURN     : string obj
 *==========================================================================*/
String8 QCameraParameters::createZoomRatioValuesString(uint32_t *zoomRatios,
        size_t length)
{
    String8 str;
    char buffer[32] = {0};

    if(length > 0){
        snprintf(buffer, sizeof(buffer), "%d", zoomRatios[0]);
        str.append(buffer);
    }

    for (size_t i = 1; i < length; i++) {
        memset(buffer, 0, sizeof(buffer));
        snprintf(buffer, sizeof(buffer), ",%d", zoomRatios[i]);
        str.append(buffer);
    }
    return str;
}

/*===========================================================================
 * FUNCTION   : createHfrValuesString
 *
 * DESCRIPTION: create string obj contains array of hfr values from map when
 *              matched from input hfr values
 *
 * PARAMETERS :
 *   @values  : array of hfr info
 *   @len     : size of the array
 *   @map     : map of hfr string value and enum
 *   map_len  : size of map
 *
 * RETURN     : string obj
 *==========================================================================*/
String8 QCameraParameters::createHfrValuesString(const cam_hfr_info_t *values,
        size_t len, const QCameraMap<cam_hfr_mode_t> *map, size_t map_len)
{
    String8 str;
    int count = 0;

    char value[PROPERTY_VALUE_MAX];
    int8_t batch_count = 0;

    property_get("persist.camera.batchcount", value, "0");
    batch_count = atoi(value);

    for (size_t i = 0; i < len; i++ ) {
        for (size_t j = 0; j < map_len; j ++) {
            if ((batch_count < CAMERA_MIN_BATCH_COUNT)
                    && (map[j].val > CAM_HFR_MODE_120FPS)) {
                /*TODO: Work around. Need to revert when we have
                complete 240fps support*/
                break;
            }
            if (map[j].val == (int)values[i].mode) {
                if (NULL != map[j].desc) {
                    if (count > 0) {
                        str.append(",");
                    }
                     str.append(map[j].desc);
                     count++;
                     break; //loop j
                }
            }
        }
    }
    if (count > 0) {
        str.append(",");
    }
    str.append(VIDEO_HFR_OFF);
    return str;
}

/*===========================================================================
 * FUNCTION   : createHfrSizesString
 *
 * DESCRIPTION: create string obj contains array of hfr sizes
 *
 * PARAMETERS :
 *   @values  : array of hfr info
 *   @len     : size of the array
 *
 * RETURN     : string obj
 *==========================================================================*/
String8 QCameraParameters::createHfrSizesString(const cam_hfr_info_t *values, size_t len)
{
    String8 str;
    char buffer[32];

    if (len > 0) {
        snprintf(buffer, sizeof(buffer), "%dx%d",
                 values[0].dim[0].width, values[0].dim[0].height);
        str.append(buffer);
    }
    for (size_t i = 1; i < len; i++) {
        snprintf(buffer, sizeof(buffer), ",%dx%d",
                 values[i].dim[0].width, values[i].dim[0].height);
        str.append(buffer);
    }
    return str;
}

/*===========================================================================
 * FUNCTION   : createFpsString
 *
 * DESCRIPTION: create string obj contains array of FPS rates
 *
 * PARAMETERS :
 *   @fps     : default fps range
 *
 * RETURN     : string obj
 *==========================================================================*/
String8 QCameraParameters::createFpsString(cam_fps_range_t &fps)
{
    char buffer[32];
    String8 fpsValues;

    int min_fps = int(fps.min_fps);
    int max_fps = int(fps.max_fps);

    if (min_fps < fps.min_fps){
        min_fps++;
    }
    if (max_fps > fps.max_fps) {
        max_fps--;
    }
    if (min_fps <= max_fps) {
        snprintf(buffer, sizeof(buffer), "%d", min_fps);
        fpsValues.append(buffer);
    }

    for (int i = min_fps+1; i <= max_fps; i++) {
        snprintf(buffer, sizeof(buffer), ",%d", i);
        fpsValues.append(buffer);
    }

    return fpsValues;
}

/*===========================================================================
 * FUNCTION   : createFpsRangeString
 *
 * DESCRIPTION: create string obj contains array of FPS ranges
 *
 * PARAMETERS :
 *   @fps     : array of fps ranges
 *   @len     : size of the array
 *   @default_fps_index : reference to index of default fps range
 *
 * RETURN     : string obj
 *==========================================================================*/
String8 QCameraParameters::createFpsRangeString(const cam_fps_range_t* fps,
        size_t len, int &default_fps_index)
{
    String8 str;
    char buffer[32];
    int max_range = 0;
    int min_fps, max_fps;

    if (len > 0) {
        min_fps = int(fps[0].min_fps * 1000);
        max_fps = int(fps[0].max_fps * 1000);
        max_range = max_fps - min_fps;
        default_fps_index = 0;
        snprintf(buffer, sizeof(buffer), "(%d,%d)", min_fps, max_fps);
        str.append(buffer);
    }
    for (size_t i = 1; i < len; i++) {
        min_fps = int(fps[i].min_fps * 1000);
        max_fps = int(fps[i].max_fps * 1000);
        if (max_range < (max_fps - min_fps)) {
            max_range = max_fps - min_fps;
            default_fps_index = (int)i;
        }
        snprintf(buffer, sizeof(buffer), ",(%d,%d)", min_fps, max_fps);
        str.append(buffer);
    }
    return str;
}

/*===========================================================================
 * FUNCTION   : lookupAttr
 *
 * DESCRIPTION: lookup a value by its name
 *
 * PARAMETERS :
 *   @attr    : map contains <name, value>
 *   @len     : size of the map
 *   @name    : name to be looked up
 *
 * RETURN     : valid value if found
 *              NAME_NOT_FOUND if not found
 *==========================================================================*/
template <class mapType> int lookupAttr(const mapType *arr,
        size_t len, const char *name)
{
    if (name) {
        for (size_t i = 0; i < len; i++) {
            if (!strcmp(arr[i].desc, name))
                return arr[i].val;
        }
    }
    return NAME_NOT_FOUND;
}

/*===========================================================================
 * FUNCTION   : lookupNameByValue
 *
 * DESCRIPTION: lookup a name by its value
 *
 * PARAMETERS :
 *   @attr    : map contains <name, value>
 *   @len     : size of the map
 *   @value   : value to be looked up
 *
 * RETURN     : name str or NULL if not found
 *==========================================================================*/
template <class mapType> const char *lookupNameByValue(const mapType *arr,
        size_t len, int value)
{
    for (size_t i = 0; i < len; i++) {
        if (arr[i].val == value) {
            return arr[i].desc;
        }
    }
    return NULL;
}

/*===========================================================================
 * FUNCTION   : setPreviewSize
 *
 * DESCRIPTION: set preview size from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setPreviewSize(const QCameraParameters& params)
{
    int width = 0, height = 0;
    int old_width = 0, old_height = 0;
    params.getPreviewSize(&width, &height);
    CameraParameters::getPreviewSize(&old_width, &old_height);

    // Validate the preview size
    for (size_t i = 0; i < m_pCapability->preview_sizes_tbl_cnt; ++i) {
        if (width ==  m_pCapability->preview_sizes_tbl[i].width
           && height ==  m_pCapability->preview_sizes_tbl[i].height) {
            // check if need to restart preview in case of preview size change
            if (width != old_width || height != old_height) {
                LOGI("Requested preview size %d x %d", width, height);
                m_bNeedRestart = true;
            }
            // set the new value
            CameraParameters::setPreviewSize(width, height);
            return NO_ERROR;
        }
    }
    if (m_relCamSyncInfo.mode == CAM_MODE_SECONDARY) {
        char prop[PROPERTY_VALUE_MAX];
        // set prop to configure aux preview size
        property_get("persist.camera.aux.preview.size", prop, "0");
        parse_pair(prop, &width, &height, 'x', NULL);
        bool foundMatch = false;
        for (size_t i = 0; i < m_pCapability->preview_sizes_tbl_cnt; ++i) {
            if (width ==  m_pCapability->preview_sizes_tbl[i].width &&
                    height ==  m_pCapability->preview_sizes_tbl[i].height) {
               foundMatch = true;
            }
        }
        if (!foundMatch) {
            width = m_pCapability->preview_sizes_tbl[0].width;
            height = m_pCapability->preview_sizes_tbl[0].height;
        }
        // check if need to restart preview in case of preview size change
        if (width != old_width || height != old_height) {
            m_bNeedRestart = true;
        }
        CameraParameters::setPreviewSize(width, height);
        LOGH("Secondary Camera: preview size %d x %d", width, height);
        return NO_ERROR;
    }

    LOGE("Invalid preview size requested: %dx%d", width, height);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setPictureSize
 *
 * DESCRIPTION: set picture size from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setPictureSize(const QCameraParameters& params)
{
    int width, height;
    params.getPictureSize(&width, &height);
    int old_width, old_height;
    CameraParameters::getPictureSize(&old_width, &old_height);

    // Validate the picture size
    if(!m_reprocScaleParam.isScaleEnabled()){
        for (size_t i = 0; i < m_pCapability->picture_sizes_tbl_cnt; ++i) {
            if (width ==  m_pCapability->picture_sizes_tbl[i].width
               && height ==  m_pCapability->picture_sizes_tbl[i].height) {
                // check if need to restart preview in case of picture size change
                if ((m_bZslMode || m_bRecordingHint) &&
                    (width != old_width || height != old_height)) {
                    LOGI("Requested picture size %d x %d", width, height);
                    m_bNeedRestart = true;
                }
                // set the new value
                CameraParameters::setPictureSize(width, height);
                // Update View angles based on Picture Aspect ratio
                updateViewAngles();
                return NO_ERROR;
            }
        }
    }else{
        //should use scaled picture size table to validate
        if(m_reprocScaleParam.setValidatePicSize(width, height) == NO_ERROR){
            // check if need to restart preview in case of picture size change
            if ((m_bZslMode || m_bRecordingHint) &&
                (width != old_width || height != old_height)) {
                m_bNeedRestart = true;
            }
            // set the new value
            char val[32];
            snprintf(val, sizeof(val), "%dx%d", width, height);
            updateParamEntry(KEY_PICTURE_SIZE, val);
            LOGH("%s", val);
            // Update View angles based on Picture Aspect ratio
            updateViewAngles();
            return NO_ERROR;
        }
    }
    if (m_relCamSyncInfo.mode == CAM_MODE_SECONDARY) {
        char prop[PROPERTY_VALUE_MAX];
        // set prop to configure aux preview size
        property_get("persist.camera.aux.picture.size", prop, "0");
        parse_pair(prop, &width, &height, 'x', NULL);
        bool foundMatch = false;
        for (size_t i = 0; i < m_pCapability->picture_sizes_tbl_cnt; ++i) {
            if (width ==  m_pCapability->picture_sizes_tbl[i].width &&
                    height ==  m_pCapability->picture_sizes_tbl[i].height) {
               foundMatch = true;
            }
        }
        if (!foundMatch) {
            width = m_pCapability->picture_sizes_tbl[0].width;
            height = m_pCapability->picture_sizes_tbl[0].height;
        }
        // check if need to restart preview in case of preview size change
        if (width != old_width || height != old_height) {
            m_bNeedRestart = true;
        }
        char val[32];
        snprintf(val, sizeof(val), "%dx%d", width, height);
        set(KEY_PICTURE_SIZE, val);
        LOGH("Secondary Camera: picture size %s", val);
        return NO_ERROR;
    }
    LOGE("Invalid picture size requested: %dx%d", width, height);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : updateViewAngles
 *
 * DESCRIPTION: Update the Horizontal & Vertical based on the Aspect ratio of Preview and
 *                        Picture aspect ratio
 *
 * PARAMETERS : none
 *
 * RETURN     : none
 *==========================================================================*/
void QCameraParameters::updateViewAngles()
{
    double stillAspectRatio, maxPictureAspectRatio;
    int stillWidth, stillHeight, maxWidth, maxHeight;
    // The crop factors from the full sensor array to the still picture crop region
    double horizCropFactor = 1.f,vertCropFactor = 1.f;
    float horizViewAngle, vertViewAngle, maxHfov, maxVfov;

    // Get current Picture & max Snapshot sizes
    getPictureSize(&stillWidth, &stillHeight);
    maxWidth  = m_pCapability->picture_sizes_tbl[0].width;
    maxHeight = m_pCapability->picture_sizes_tbl[0].height;

    // Get default maximum FOV from corresponding sensor driver
    maxHfov = m_pCapability->hor_view_angle;
    maxVfov = m_pCapability->ver_view_angle;

    stillAspectRatio = (double)stillWidth/stillHeight;
    maxPictureAspectRatio = (double)maxWidth/maxHeight;
    LOGD("Stillwidth: %d, height: %d", stillWidth, stillHeight);
    LOGD("Max width: %d, height: %d", maxWidth, maxHeight);
    LOGD("still aspect: %f, Max Pic Aspect: %f",
            stillAspectRatio, maxPictureAspectRatio);

    // crop as per the Maximum Snapshot aspect ratio
    if (stillAspectRatio < maxPictureAspectRatio)
        horizCropFactor = stillAspectRatio/maxPictureAspectRatio;
    else
        vertCropFactor = maxPictureAspectRatio/stillAspectRatio;

    LOGD("horizCropFactor %f, vertCropFactor %f",
             horizCropFactor, vertCropFactor);

    // Now derive the final FOV's based on field of view formula is i.e,
    // angle of view = 2 * arctangent ( d / 2f )
    // where d is the physical sensor dimension of interest, and f is
    // the focal length. This only applies to rectilinear sensors, for focusing
    // at distances >> f, etc.
    // Here d/2f is nothing but the Maximum Horizontal or Veritical FOV
    horizViewAngle = (180/PI)*2*atan(horizCropFactor*tan((maxHfov/2)*(PI/180)));
    vertViewAngle = (180/PI)*2*atan(horizCropFactor*tan((maxVfov/2)*(PI/180)));

    setFloat(QCameraParameters::KEY_HORIZONTAL_VIEW_ANGLE, horizViewAngle);
    setFloat(QCameraParameters::KEY_VERTICAL_VIEW_ANGLE, vertViewAngle);
    LOGH("Final horizViewAngle %f, vertViewAngle %f",
            horizViewAngle, vertViewAngle);
}

/*===========================================================================
 * FUNCTION   : setVideoSize
 *
 * DESCRIPTION: set video size from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setVideoSize(const QCameraParameters& params)
{
    const char *str= NULL;
    int width, height;
    str = params.get(KEY_VIDEO_SIZE);
    int old_width, old_height;
    CameraParameters::getVideoSize(&old_width, &old_height);
    if(!str) {
        //If application didn't set this parameter string, use the values from
        //getPreviewSize() as video dimensions.
        params.getPreviewSize(&width, &height);
        LOGW("No Record Size requested, use the preview dimensions");
    } else {
        params.getVideoSize(&width, &height);
    }

    // Validate the video size
    for (size_t i = 0; i < m_pCapability->video_sizes_tbl_cnt; ++i) {
        if (width ==  m_pCapability->video_sizes_tbl[i].width
                && height ==  m_pCapability->video_sizes_tbl[i].height) {
            // check if need to restart preview in case of video size change
            if (m_bRecordingHint &&
               (width != old_width || height != old_height)) {
                m_bNeedRestart = true;
            }

            // set the new value
            LOGH("Requested video size %d x %d", width, height);
            CameraParameters::setVideoSize(width, height);
            return NO_ERROR;
        }
    }
    if (m_relCamSyncInfo.mode == CAM_MODE_SECONDARY) {
        // Set the default preview size for secondary camera
        width = m_pCapability->video_sizes_tbl[0].width;
        height = m_pCapability->video_sizes_tbl[0].height;
        // check if need to restart preview in case of preview size change
        if (width != old_width || height != old_height) {
            m_bNeedRestart = true;
        }

        CameraParameters::setVideoSize(width, height);
        LOGH("Secondary Camera: video size %d x %d",
                 width, height);
        return NO_ERROR;
    }

    LOGE("Error !! Invalid video size requested: %dx%d", width, height);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : getLiveSnapshotSize
 *
 * DESCRIPTION: get live snapshot size
 *
 * PARAMETERS : dim - Update dim with the liveshot size
 *
 *==========================================================================*/
void QCameraParameters::getLiveSnapshotSize(cam_dimension_t &dim)
{
    if(is4k2kVideoResolution()) {
        // We support maximum 8M liveshot @4K2K video resolution
        cam_dimension_t resolution = {0, 0};
        CameraParameters::getVideoSize(&resolution.width, &resolution.height);
        if((m_LiveSnapshotSize.width > resolution.width) ||
                (m_LiveSnapshotSize.height > resolution.height)) {
            m_LiveSnapshotSize.width = resolution.width;
            m_LiveSnapshotSize.height = resolution.height;
        }
    }
    dim = m_LiveSnapshotSize;
    LOGH("w x h: %d x %d", dim.width, dim.height);
}

/*===========================================================================
 * FUNCTION   : setLiveSnapshotSize
 *
 * DESCRIPTION: set live snapshot size
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setLiveSnapshotSize(const QCameraParameters& params)
{
    char value[PROPERTY_VALUE_MAX];
    property_get("persist.camera.opt.livepic", value, "1");
    bool useOptimal = atoi(value) > 0 ? true : false;
    bool vHdrOn;
    int32_t liveSnapWidth = 0, liveSnapHeight = 0;
    // use picture size from user setting
    params.getPictureSize(&m_LiveSnapshotSize.width, &m_LiveSnapshotSize.height);

    size_t livesnapshot_sizes_tbl_cnt =
            m_pCapability->livesnapshot_sizes_tbl_cnt;
    cam_dimension_t *livesnapshot_sizes_tbl =
            &m_pCapability->livesnapshot_sizes_tbl[0];

    if(is4k2kVideoResolution()) {
        // We support maximum 8M liveshot @4K2K video resolution
        cam_dimension_t resolution = {0, 0};
        CameraParameters::getVideoSize(&resolution.width, &resolution.height);
        if((m_LiveSnapshotSize.width > resolution.width) ||
                (m_LiveSnapshotSize.height > resolution.height)) {
            m_LiveSnapshotSize.width = resolution.width;
            m_LiveSnapshotSize.height = resolution.height;
        }
    }

    // check if HFR is enabled
    const char *hfrStr = params.get(KEY_QC_VIDEO_HIGH_FRAME_RATE);
    cam_hfr_mode_t hfrMode = CAM_HFR_MODE_OFF;
    const char *hsrStr = params.get(KEY_QC_VIDEO_HIGH_SPEED_RECORDING);

    const char *vhdrStr = params.get(KEY_QC_VIDEO_HDR);
    vHdrOn = (vhdrStr != NULL && (0 == strcmp(vhdrStr,"on"))) ? true : false;
    if (vHdrOn) {
        livesnapshot_sizes_tbl_cnt = m_pCapability->vhdr_livesnapshot_sizes_tbl_cnt;
        livesnapshot_sizes_tbl = &m_pCapability->vhdr_livesnapshot_sizes_tbl[0];
    }
    if ((hsrStr != NULL) && strcmp(hsrStr, "off")) {
        int32_t hsr = lookupAttr(HFR_MODES_MAP, PARAM_MAP_SIZE(HFR_MODES_MAP), hsrStr);
        if ((hsr != NAME_NOT_FOUND) && (hsr > CAM_HFR_MODE_OFF)) {
            // if HSR is enabled, change live snapshot size
            for (size_t i = 0; i < m_pCapability->hfr_tbl_cnt; i++) {
                if (m_pCapability->hfr_tbl[i].mode == hsr) {
                    livesnapshot_sizes_tbl_cnt =
                            m_pCapability->hfr_tbl[i].livesnapshot_sizes_tbl_cnt;
                    livesnapshot_sizes_tbl =
                            &m_pCapability->hfr_tbl[i].livesnapshot_sizes_tbl[0];
                    hfrMode = m_pCapability->hfr_tbl[i].mode;
                    break;
                }
            }
        }
    } else if ((hfrStr != NULL) && strcmp(hfrStr, "off")) {
        int32_t hfr = lookupAttr(HFR_MODES_MAP, PARAM_MAP_SIZE(HFR_MODES_MAP), hfrStr);
        if ((hfr != NAME_NOT_FOUND) && (hfr > CAM_HFR_MODE_OFF)) {
            // if HFR is enabled, change live snapshot size
            for (size_t i = 0; i < m_pCapability->hfr_tbl_cnt; i++) {
                if (m_pCapability->hfr_tbl[i].mode == hfr) {
                    livesnapshot_sizes_tbl_cnt =
                            m_pCapability->hfr_tbl[i].livesnapshot_sizes_tbl_cnt;
                    livesnapshot_sizes_tbl =
                            &m_pCapability->hfr_tbl[i].livesnapshot_sizes_tbl[0];
                    hfrMode = m_pCapability->hfr_tbl[i].mode;
                    break;
                }
            }
        }
    }

    if (useOptimal || hfrMode != CAM_HFR_MODE_OFF || vHdrOn) {
        bool found = false;

        // first check if picture size is within the list of supported sizes
        for (size_t i = 0; i < livesnapshot_sizes_tbl_cnt; ++i) {
            if (m_LiveSnapshotSize.width == livesnapshot_sizes_tbl[i].width &&
                m_LiveSnapshotSize.height == livesnapshot_sizes_tbl[i].height) {
                found = true;
                break;
            }
        }

        if (!found) {
            // use optimal live snapshot size from supported list,
            // that has same preview aspect ratio
            int width = 0, height = 0;
            params.getPreviewSize(&width, &height);

            double previewAspectRatio = (double)width / height;
            for (size_t i = 0; i < livesnapshot_sizes_tbl_cnt; ++i) {
                double ratio = (double)livesnapshot_sizes_tbl[i].width /
                                livesnapshot_sizes_tbl[i].height;
                if (fabs(previewAspectRatio - ratio) <= ASPECT_TOLERANCE) {
                    m_LiveSnapshotSize = livesnapshot_sizes_tbl[i];
                    found = true;
                    break;
                }
            }

            if (!found && ((hfrMode != CAM_HFR_MODE_OFF) || vHdrOn)) {
                // Cannot find matching aspect ration from supported live snapshot list
                // choose the max dim from preview and video size
                LOGD("Cannot find matching aspect ratio, choose max of preview or video size");
                params.getVideoSize(&m_LiveSnapshotSize.width, &m_LiveSnapshotSize.height);
                if (m_LiveSnapshotSize.width < width && m_LiveSnapshotSize.height < height) {
                    m_LiveSnapshotSize.width = width;
                    m_LiveSnapshotSize.height = height;
                }
            }
        }
    }
    //To read liveshot resolution from setprop instead of matching aspect ratio.
    //The setprop resolution format should be WxH.
    //e.g: adb shell setprop persist.camera.liveshot.size 1280x720
    memset(value, 0, PROPERTY_VALUE_MAX);
    property_get("persist.camera.liveshot.size", value, "");
    if (strlen(value) > 0) {
        char *saveptr = NULL;
        char *token = strtok_r(value, "x", &saveptr);
        if (token != NULL) {
            liveSnapWidth = atoi(token);
        }
        token = strtok_r(NULL, "x", &saveptr);
        if (token != NULL) {
            liveSnapHeight = atoi(token);
        }
        if ((liveSnapWidth!=0) && (liveSnapHeight!=0)) {
            for (size_t i = 0; i < m_pCapability->picture_sizes_tbl_cnt; ++i) {
                if (liveSnapWidth ==  m_pCapability->picture_sizes_tbl[i].width
                        && liveSnapHeight ==  m_pCapability->picture_sizes_tbl[i].height) {
                   m_LiveSnapshotSize.width = liveSnapWidth;
                   m_LiveSnapshotSize.height = liveSnapHeight;
                   break;
                }
            }
        }
    }
    LOGH("live snapshot size %d x %d",
          m_LiveSnapshotSize.width, m_LiveSnapshotSize.height);

    return NO_ERROR;
}


/*===========================================================================
 * FUNCTION   : setRawSize
 *
 * DESCRIPTION: set live snapshot size
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setRawSize(cam_dimension_t &dim)
{
    m_rawSize = dim;
    return NO_ERROR;
}
/*===========================================================================
 * FUNCTION   : setPreviewFormat
 *
 * DESCRIPTION: set preview format from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setPreviewFormat(const QCameraParameters& params)
{
    const char *str = params.getPreviewFormat();
    int32_t previewFormat = lookupAttr(PREVIEW_FORMATS_MAP,
            PARAM_MAP_SIZE(PREVIEW_FORMATS_MAP), str);
    if (previewFormat != NAME_NOT_FOUND) {
        if (isUBWCEnabled()) {
            char prop[PROPERTY_VALUE_MAX];
            int pFormat;
            memset(prop, 0, sizeof(prop));
            property_get("persist.camera.preview.ubwc", prop, "1");

            pFormat = atoi(prop);
            if (pFormat == 1) {
                mPreviewFormat = CAM_FORMAT_YUV_420_NV12_UBWC;
                mAppPreviewFormat = (cam_format_t)previewFormat;
            } else {
                mPreviewFormat = (cam_format_t)previewFormat;
                mAppPreviewFormat = (cam_format_t)previewFormat;
            }
        } else {
            mPreviewFormat = (cam_format_t)previewFormat;
            mAppPreviewFormat = (cam_format_t)previewFormat;
        }
        CameraParameters::setPreviewFormat(str);
        LOGH("format %d\n", mPreviewFormat);
        return NO_ERROR;
    }
    LOGE("Invalid preview format value: %s", (str == NULL) ? "NULL" : str);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setPictureFormat
 *
 * DESCRIPTION: set picture format from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setPictureFormat(const QCameraParameters& params)
{
    const char *str = params.getPictureFormat();
    int32_t pictureFormat = lookupAttr(PICTURE_TYPES_MAP, PARAM_MAP_SIZE(PICTURE_TYPES_MAP), str);
    if (pictureFormat != NAME_NOT_FOUND) {
        mPictureFormat = pictureFormat;

        CameraParameters::setPictureFormat(str);
        LOGH("format %d\n", mPictureFormat);
        return NO_ERROR;
    }
    LOGE("Invalid picture format value: %s", (str == NULL) ? "NULL" : str);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setJpegThumbnailSize
 *
 * DESCRIPTION: set jpeg thumbnail size from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setJpegThumbnailSize(const QCameraParameters& params)
{
    int width = params.getInt(KEY_JPEG_THUMBNAIL_WIDTH);
    int height = params.getInt(KEY_JPEG_THUMBNAIL_HEIGHT);

    LOGD("requested jpeg thumbnail size %d x %d", width, height);
    int sizes_cnt = sizeof(THUMBNAIL_SIZES_MAP) / sizeof(cam_dimension_t);
    // Validate thumbnail size
    for (int i = 0; i < sizes_cnt; i++) {
        if (width == THUMBNAIL_SIZES_MAP[i].width &&
                height == THUMBNAIL_SIZES_MAP[i].height) {
           set(KEY_JPEG_THUMBNAIL_WIDTH, width);
           set(KEY_JPEG_THUMBNAIL_HEIGHT, height);
           return NO_ERROR;
        }
    }
    LOGE("error: setting jpeg thumbnail size (%d, %d)", width, height);
    return BAD_VALUE;
}

/*===========================================================================

 * FUNCTION   : setBurstLEDOnPeriod
 *
 * DESCRIPTION: set burst LED on period
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setBurstLEDOnPeriod(const QCameraParameters& params)
{
    int nBurstLEDOnPeriod = params.getInt(KEY_QC_SNAPSHOT_BURST_LED_ON_PERIOD);
    //Check if the LED ON period is within limits
    if ((nBurstLEDOnPeriod <= 0) || (nBurstLEDOnPeriod > 800)) {
        // if burst led on period is not set in parameters,
        // read from sys prop
        char prop[PROPERTY_VALUE_MAX];
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.led.on.period", prop, "0");
        nBurstLEDOnPeriod = atoi(prop);
        if (nBurstLEDOnPeriod <= 0) {
            nBurstLEDOnPeriod = 300;
        }
    }

    set(KEY_QC_SNAPSHOT_BURST_LED_ON_PERIOD, nBurstLEDOnPeriod);
    m_nBurstLEDOnPeriod = nBurstLEDOnPeriod;
    LOGH("Burst LED on period  %u", m_nBurstLEDOnPeriod);
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_BURST_LED_ON_PERIOD,
            (uint32_t)nBurstLEDOnPeriod)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}


/*===========================================================================
 * FUNCTION   : setRetroActiveBurstNum
 *
 * DESCRIPTION: set retro active burst num
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setRetroActiveBurstNum(
        const QCameraParameters& params)
{
    int32_t nBurstNum = params.getInt(KEY_QC_NUM_RETRO_BURST_PER_SHUTTER);
    LOGH("m_nRetroBurstNum = %d", m_nRetroBurstNum);
    if (nBurstNum <= 0) {
        // if burst number is not set in parameters,
        // read from sys prop
        char prop[PROPERTY_VALUE_MAX];
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.retro.number", prop, "0");
        nBurstNum = atoi(prop);
        if (nBurstNum < 0) {
            nBurstNum = 0;
        }
    }

    set(KEY_QC_NUM_RETRO_BURST_PER_SHUTTER, nBurstNum);

    m_nRetroBurstNum = nBurstNum;
    LOGH("m_nRetroBurstNum = %d", m_nRetroBurstNum);
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setJpegQuality
 *
 * DESCRIPTION: set jpeg encpding quality from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setJpegQuality(const QCameraParameters& params)
{
    int32_t rc = NO_ERROR;
    int quality = params.getInt(KEY_JPEG_QUALITY);
    if (quality >= 0 && quality <= 100) {
        set(KEY_JPEG_QUALITY, quality);
    } else {
        LOGE("Invalid jpeg quality=%d", quality);
        rc = BAD_VALUE;
    }

    quality = params.getInt(KEY_JPEG_THUMBNAIL_QUALITY);
    if (quality >= 0 && quality <= 100) {
        set(KEY_JPEG_THUMBNAIL_QUALITY, quality);
    } else {
        LOGE("Invalid jpeg thumbnail quality=%d", quality);
        rc = BAD_VALUE;
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : setOrientaion
 *
 * DESCRIPTION: set orientaion from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setOrientation(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_ORIENTATION);

    if (str != NULL) {
        if (strcmp(str, portrait) == 0 || strcmp(str, landscape) == 0) {
            // Camera service needs this to decide if the preview frames and raw
            // pictures should be rotated.
            set(KEY_QC_ORIENTATION, str);
        } else {
            LOGE("Invalid orientation value: %s", str);
            return BAD_VALUE;
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setAutoExposure
 *
 * DESCRIPTION: set auto exposure value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAutoExposure(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_AUTO_EXPOSURE);
    const char *prev_str = get(KEY_QC_AUTO_EXPOSURE);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setAutoExposure(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setPreviewFpsRange
 *
 * DESCRIPTION: set preview FPS range from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setPreviewFpsRange(const QCameraParameters& params)
{
    int minFps,maxFps;
    int prevMinFps, prevMaxFps, vidMinFps, vidMaxFps;
    int rc = NO_ERROR;
    bool found = false, updateNeeded = false;

    CameraParameters::getPreviewFpsRange(&prevMinFps, &prevMaxFps);
    params.getPreviewFpsRange(&minFps, &maxFps);

    LOGH("FpsRange Values:(%d, %d)", prevMinFps, prevMaxFps);
    LOGH("Requested FpsRange Values:(%d, %d)", minFps, maxFps);

    //first check if we need to change fps because of HFR mode change
    updateNeeded = UpdateHFRFrameRate(params);
    if (updateNeeded) {
        m_bNeedRestart = true;
        rc = setHighFrameRate(mHfrMode);
        if (rc != NO_ERROR) goto end;
    }
    LOGH("UpdateHFRFrameRate %d", updateNeeded);

    vidMinFps = (int)m_hfrFpsRange.video_min_fps;
    vidMaxFps = (int)m_hfrFpsRange.video_max_fps;

    if(minFps == prevMinFps && maxFps == prevMaxFps) {
        if ( m_bFixedFrameRateSet ) {
            minFps = params.getPreviewFrameRate() * 1000;
            maxFps = params.getPreviewFrameRate() * 1000;
            m_bFixedFrameRateSet = false;
        } else if (!updateNeeded) {
            LOGH("No change in FpsRange");
            rc = NO_ERROR;
            goto end;
        }
    }
    for(size_t i = 0; i < m_pCapability->fps_ranges_tbl_cnt; i++) {
        // if the value is in the supported list
        if (minFps >= m_pCapability->fps_ranges_tbl[i].min_fps * 1000 &&
                maxFps <= m_pCapability->fps_ranges_tbl[i].max_fps * 1000) {
            found = true;
            LOGH("FPS i=%d : minFps = %d, maxFps = %d"
                    " vidMinFps = %d, vidMaxFps = %d",
                     i, minFps, maxFps,
                    (int)m_hfrFpsRange.video_min_fps,
                    (int)m_hfrFpsRange.video_max_fps);
            if ((0.0f >= m_hfrFpsRange.video_min_fps) ||
                    (0.0f >= m_hfrFpsRange.video_max_fps)) {
                vidMinFps = minFps;
                vidMaxFps = maxFps;
            }
            else {
                vidMinFps = (int)m_hfrFpsRange.video_min_fps;
                vidMaxFps = (int)m_hfrFpsRange.video_max_fps;
            }

            setPreviewFpsRange(minFps, maxFps, vidMinFps, vidMaxFps);
            break;
        }
    }
    if(found == false){
        LOGE("error: FPS range value not supported");
        rc = BAD_VALUE;
    }
end:
    return rc;
}

/*===========================================================================
 * FUNCTION   : UpdateHFRFrameRate
 *
 * DESCRIPTION: set preview FPS range based on HFR setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : bool true/false
 *                  true -if HAL needs to overwrite FPS range set by app, false otherwise.
 *==========================================================================*/

bool QCameraParameters::UpdateHFRFrameRate(const QCameraParameters& params)
{
    bool updateNeeded = false;
    int min_fps, max_fps;
    int32_t hfrMode = CAM_HFR_MODE_OFF;
    int32_t newHfrMode = CAM_HFR_MODE_OFF;

    int parm_minfps,parm_maxfps;
    int prevMinFps, prevMaxFps;
    CameraParameters::getPreviewFpsRange(&prevMinFps, &prevMaxFps);
    params.getPreviewFpsRange(&parm_minfps, &parm_maxfps);
    LOGH("CameraParameters - : minFps = %d, maxFps = %d ",
                 prevMinFps, prevMaxFps);
    LOGH("Requested params - : minFps = %d, maxFps = %d ",
                 parm_minfps, parm_maxfps);

    const char *hfrStr = params.get(KEY_QC_VIDEO_HIGH_FRAME_RATE);
    const char *hsrStr = params.get(KEY_QC_VIDEO_HIGH_SPEED_RECORDING);

    const char *prev_hfrStr = CameraParameters::get(KEY_QC_VIDEO_HIGH_FRAME_RATE);
    const char *prev_hsrStr = CameraParameters::get(KEY_QC_VIDEO_HIGH_SPEED_RECORDING);

    if ((hfrStr != NULL) && (prev_hfrStr != NULL) && strcmp(hfrStr, prev_hfrStr)) {
        updateParamEntry(KEY_QC_VIDEO_HIGH_FRAME_RATE, hfrStr);
    }

    if ((hsrStr != NULL) && (prev_hsrStr != NULL) && strcmp(hsrStr, prev_hsrStr)) {
        updateParamEntry(KEY_QC_VIDEO_HIGH_SPEED_RECORDING, hsrStr);

    }

    // check if HFR is enabled
    if ((hfrStr != NULL) && strcmp(hfrStr, "off")) {
        hfrMode = lookupAttr(HFR_MODES_MAP, PARAM_MAP_SIZE(HFR_MODES_MAP), hfrStr);
        if (NAME_NOT_FOUND != hfrMode) newHfrMode = hfrMode;
    }
    // check if HSR is enabled
    else if ((hsrStr != NULL) && strcmp(hsrStr, "off")) {
        hfrMode = lookupAttr(HFR_MODES_MAP, PARAM_MAP_SIZE(HFR_MODES_MAP), hsrStr);
        if (NAME_NOT_FOUND != hfrMode) newHfrMode = hfrMode;
    }
    LOGH("prevHfrMode - %d, currentHfrMode = %d ",
                 mHfrMode, newHfrMode);

    if (mHfrMode != newHfrMode) {
        updateNeeded = true;
        mHfrMode = newHfrMode;
        switch (mHfrMode) {
            case CAM_HFR_MODE_60FPS:
                min_fps = 60000;
                max_fps = 60000;
                break;
            case CAM_HFR_MODE_90FPS:
                min_fps = 90000;
                max_fps = 90000;
                break;
            case CAM_HFR_MODE_120FPS:
                min_fps = 120000;
                max_fps = 120000;
                break;
            case CAM_HFR_MODE_150FPS:
                min_fps = 150000;
                max_fps = 150000;
                break;
            case CAM_HFR_MODE_180FPS:
                min_fps = 180000;
                max_fps = 180000;
                break;
            case CAM_HFR_MODE_210FPS:
                min_fps = 210000;
                max_fps = 210000;
                break;
            case CAM_HFR_MODE_240FPS:
                min_fps = 240000;
                max_fps = 240000;
                break;
            case CAM_HFR_MODE_480FPS:
                min_fps = 480000;
                max_fps = 480000;
                break;
            case CAM_HFR_MODE_OFF:
            default:
                // Set Video Fps to zero
                min_fps = 0;
                max_fps = 0;
                break;
        }
        m_hfrFpsRange.video_min_fps = (float)min_fps;
        m_hfrFpsRange.video_max_fps = (float)max_fps;

        LOGH("HFR mode (%d) Set video FPS : minFps = %d, maxFps = %d ",
                 mHfrMode, min_fps, max_fps);
    }

    // Remember if HFR mode is ON
    if ((mHfrMode > CAM_HFR_MODE_OFF) && (mHfrMode < CAM_HFR_MODE_MAX)) {
        LOGH("HFR mode is ON");
        m_bHfrMode = true;
    } else {
        m_hfrFpsRange.video_min_fps = 0;
        m_hfrFpsRange.video_max_fps = 0;
        m_bHfrMode = false;
        LOGH("HFR mode is OFF");
    }
    m_hfrFpsRange.min_fps = (float)parm_minfps;
    m_hfrFpsRange.max_fps = (float)parm_maxfps;

    if (m_bHfrMode && (mHfrMode > CAM_HFR_MODE_120FPS)
            && (parm_maxfps != 0)) {
        //Configure buffer batch count to use batch mode for higher fps
        setBufBatchCount((int8_t)(m_hfrFpsRange.video_max_fps / parm_maxfps));
    } else {
        //Reset batch count and update KEY for encoder
        setBufBatchCount(0);
    }
    return updateNeeded;
}

/*===========================================================================
 * FUNCTION   : setPreviewFrameRate
 *
 * DESCRIPTION: set preview frame rate from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setPreviewFrameRate(const QCameraParameters& params)
{
    const char *str = params.get(KEY_PREVIEW_FRAME_RATE);
    const char *prev_str = get(KEY_PREVIEW_FRAME_RATE);

    if ( str ) {
        if ( prev_str &&
             strcmp(str, prev_str)) {
            LOGD("Requested Fixed Frame Rate %s", str);
            updateParamEntry(KEY_PREVIEW_FRAME_RATE, str);
            m_bFixedFrameRateSet = true;
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setEffect
 *
 * DESCRIPTION: set effect value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setEffect(const QCameraParameters& params)
{
    const char *str = params.get(KEY_EFFECT);
    const char *prev_str = get(KEY_EFFECT);

    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));
    property_get("persist.camera.effect", prop, "none");

    if (strcmp(prop, "none")) {
        if ((prev_str == NULL) ||
                (strcmp(prop, prev_str) != 0) ||
                (m_bUpdateEffects == true)) {
            m_bUpdateEffects = false;
            return setEffect(prop);
        }
    } else if (str != NULL) {
        if ((prev_str == NULL) ||
                (strcmp(str, prev_str) != 0) ||
                (m_bUpdateEffects == true)) {
            m_bUpdateEffects = false;
            return setEffect(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setFocusMode
 *
 * DESCRIPTION: set focus mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFocusMode(const QCameraParameters& params)
{
    const char *str = params.get(KEY_FOCUS_MODE);
    const char *prev_str = get(KEY_FOCUS_MODE);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setFocusMode(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setFocusPosition
 *
 * DESCRIPTION: set focus position from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setFocusPosition(const QCameraParameters& params)
{
    const char *focus_str = params.get(KEY_FOCUS_MODE);
    const char *prev_focus_str = get(KEY_FOCUS_MODE);

    if (NULL == focus_str) {
        return NO_ERROR;
    }

    LOGD("current focus mode: %s", focus_str);
    if (strcmp(focus_str, FOCUS_MODE_MANUAL_POSITION)) {
        LOGH(", dont set focus pos to back-end!");
        return NO_ERROR;
    }

    const char *pos = params.get(KEY_QC_MANUAL_FOCUS_POSITION);
    const char *prev_pos = get(KEY_QC_MANUAL_FOCUS_POSITION);
    const char *type = params.get(KEY_QC_MANUAL_FOCUS_POS_TYPE);
    const char *prev_type = get(KEY_QC_MANUAL_FOCUS_POS_TYPE);

    if ((pos != NULL) && (type != NULL) && (focus_str != NULL)) {
        if (prev_pos  == NULL || (strcmp(pos, prev_pos) != 0) ||
            prev_type == NULL || (strcmp(type, prev_type) != 0) ||
            prev_focus_str == NULL || (strcmp(focus_str, prev_focus_str) != 0)) {
            return setFocusPosition(type, pos);
        }
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setBrightness
 *
 * DESCRIPTION: set brightness control value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setBrightness(const QCameraParameters& params)
{
    int currentBrightness = getInt(KEY_QC_BRIGHTNESS);
    int brightness = params.getInt(KEY_QC_BRIGHTNESS);

    if(params.get(KEY_QC_BRIGHTNESS) == NULL) {
       LOGH("Brigtness not set by App ");
       return NO_ERROR;
    }
    if (currentBrightness !=  brightness) {
        if (brightness >= m_pCapability->brightness_ctrl.min_value &&
            brightness <= m_pCapability->brightness_ctrl.max_value) {
            LOGD("new brightness value : %d ", brightness);
            return setBrightness(brightness);
        } else {
            LOGE("invalid value %d out of (%d, %d)",
                   brightness,
                  m_pCapability->brightness_ctrl.min_value,
                  m_pCapability->brightness_ctrl.max_value);
            return BAD_VALUE;
        }
    } else {
        LOGD("No brightness value changed.");
        return NO_ERROR;
    }
}

/*===========================================================================
 * FUNCTION   : getBrightness
 *
 * DESCRIPTION: get brightness control value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int QCameraParameters::getBrightness()
{
    return getInt(KEY_QC_BRIGHTNESS);
}

/*===========================================================================
 * FUNCTION   : setSharpness
 *
 * DESCRIPTION: set sharpness control value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSharpness(const QCameraParameters& params)
{
    int shaprness = params.getInt(KEY_QC_SHARPNESS);
    int prev_sharp = getInt(KEY_QC_SHARPNESS);

    if(params.get(KEY_QC_SHARPNESS) == NULL) {
       LOGH("Sharpness not set by App ");
       return NO_ERROR;
    }
    if (prev_sharp !=  shaprness) {
        if((shaprness >= m_pCapability->sharpness_ctrl.min_value) &&
           (shaprness <= m_pCapability->sharpness_ctrl.max_value)) {
            LOGD("new sharpness value : %d ", shaprness);
            return setSharpness(shaprness);
        } else {
            LOGE("invalid value %d out of (%d, %d)",
                   shaprness,
                  m_pCapability->sharpness_ctrl.min_value,
                  m_pCapability->sharpness_ctrl.max_value);
            return BAD_VALUE;
        }
    } else {
        LOGD("No value change in shaprness");
        return NO_ERROR;
    }
}

/*===========================================================================
 * FUNCTION   : setSkintoneEnahancement
 *
 * DESCRIPTION: set skin tone enhancement factor from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSkinToneEnhancement(const QCameraParameters& params)
{
    int sceFactor = params.getInt(KEY_QC_SCE_FACTOR);
    int prev_sceFactor = getInt(KEY_QC_SCE_FACTOR);

    if(params.get(KEY_QC_SCE_FACTOR) == NULL) {
       LOGH("Skintone enhancement not set by App ");
       return NO_ERROR;
    }
    if (prev_sceFactor != sceFactor) {
        if((sceFactor >= m_pCapability->sce_ctrl.min_value) &&
           (sceFactor <= m_pCapability->sce_ctrl.max_value)) {
            LOGD("new Skintone Enhancement value : %d ", sceFactor);
            return setSkinToneEnhancement(sceFactor);
        } else {
            LOGE("invalid value %d out of (%d, %d)",
                   sceFactor,
                  m_pCapability->sce_ctrl.min_value,
                  m_pCapability->sce_ctrl.max_value);
            return BAD_VALUE;
        }
    } else {
        LOGD("No value change in skintone enhancement factor");
        return NO_ERROR;
    }
}

/*===========================================================================
 * FUNCTION   : setSaturation
 *
 * DESCRIPTION: set saturation control value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSaturation(const QCameraParameters& params)
{
    int saturation = params.getInt(KEY_QC_SATURATION);
    int prev_sat = getInt(KEY_QC_SATURATION);

    if(params.get(KEY_QC_SATURATION) == NULL) {
       LOGH("Saturation not set by App ");
       return NO_ERROR;
    }
    if (prev_sat !=  saturation) {
        if((saturation >= m_pCapability->saturation_ctrl.min_value) &&
           (saturation <= m_pCapability->saturation_ctrl.max_value)) {
            LOGD("new saturation value : %d ", saturation);
            return setSaturation(saturation);
        } else {
            LOGE("invalid value %d out of (%d, %d)",
                   saturation,
                  m_pCapability->saturation_ctrl.min_value,
                  m_pCapability->saturation_ctrl.max_value);
            return BAD_VALUE;
        }
    } else {
        LOGD("No value change in saturation factor");
        return NO_ERROR;
    }
}

/*===========================================================================
 * FUNCTION   : setContrast
 *
 * DESCRIPTION: set contrast control value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setContrast(const QCameraParameters& params)
{
    int contrast = params.getInt(KEY_QC_CONTRAST);
    int prev_contrast = getInt(KEY_QC_CONTRAST);

    if(params.get(KEY_QC_CONTRAST) == NULL) {
       LOGH("Contrast not set by App ");
       return NO_ERROR;
    }
    if (prev_contrast !=  contrast) {
        if((contrast >= m_pCapability->contrast_ctrl.min_value) &&
           (contrast <= m_pCapability->contrast_ctrl.max_value)) {
            LOGD("new contrast value : %d ", contrast);
            int32_t rc = setContrast(contrast);
            return rc;
        } else {
            LOGE("invalid value %d out of (%d, %d)",
                   contrast,
                  m_pCapability->contrast_ctrl.min_value,
                  m_pCapability->contrast_ctrl.max_value);
            return BAD_VALUE;
        }
    } else {
        LOGD("No value change in contrast");
        return NO_ERROR;
    }
}

/*===========================================================================
 * FUNCTION   : setExposureCompensation
 *
 * DESCRIPTION: set exposure compensation value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setExposureCompensation(const QCameraParameters & params)
{
    int expComp = params.getInt(KEY_EXPOSURE_COMPENSATION);
    int prev_expComp = getInt(KEY_EXPOSURE_COMPENSATION);

    if(params.get(KEY_EXPOSURE_COMPENSATION) == NULL) {
       LOGH("Exposure compensation not set by App ");
       return NO_ERROR;
    }
    if (prev_expComp != expComp) {
        if((expComp >= m_pCapability->exposure_compensation_min) &&
           (expComp <= m_pCapability->exposure_compensation_max)) {
            LOGD("new Exposure Compensation value : %d ", expComp);
            return setExposureCompensation(expComp);
        } else {
            LOGE("invalid value %d out of (%d, %d)",
                   expComp,
                  m_pCapability->exposure_compensation_min,
                  m_pCapability->exposure_compensation_max);
            return BAD_VALUE;
        }
    } else {
        LOGD("No value change in Exposure Compensation");
        return NO_ERROR;
    }
}

/*===========================================================================
 * FUNCTION   : setWhiteBalance
 *
 * DESCRIPTION: set white balance value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setWhiteBalance(const QCameraParameters& params)
{
    const char *str = params.get(KEY_WHITE_BALANCE);
    const char *prev_str = get(KEY_WHITE_BALANCE);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setWhiteBalance(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setManualWhiteBalance
 *
 * DESCRIPTION: set manual white balance from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setManualWhiteBalance(const QCameraParameters& params)
{
    int32_t rc = NO_ERROR;
    const char *wb_str = params.get(KEY_WHITE_BALANCE);
    const char *prev_wb_str = get(KEY_WHITE_BALANCE);
    LOGD("current wb mode: %s", wb_str);

    if (wb_str != NULL) {
        if (strcmp(wb_str, WHITE_BALANCE_MANUAL)) {
            LOGD("dont set cct to back-end.");
            return NO_ERROR;
        }
    }

    const char *value = params.get(KEY_QC_MANUAL_WB_VALUE);
    const char *prev_value = get(KEY_QC_MANUAL_WB_VALUE);
    const char *type = params.get(KEY_QC_MANUAL_WB_TYPE);
    const char *prev_type = get(KEY_QC_MANUAL_WB_TYPE);

    if ((value != NULL) && (type != NULL) && (wb_str != NULL)) {
        if (prev_value  == NULL || (strcmp(value, prev_value) != 0) ||
            prev_type == NULL || (strcmp(type, prev_type) != 0) ||
            prev_wb_str == NULL || (strcmp(wb_str, prev_wb_str) != 0)) {
            updateParamEntry(KEY_QC_MANUAL_WB_TYPE, type);
            updateParamEntry(KEY_QC_MANUAL_WB_VALUE, value);
            int32_t wb_type = atoi(type);
            if (wb_type == CAM_MANUAL_WB_MODE_CCT) {
                rc = setWBManualCCT(value);
            } else if (wb_type == CAM_MANUAL_WB_MODE_GAIN) {
                rc = setManualWBGains(value);
            } else {
                rc = BAD_VALUE;
            }
        }
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : setAntibanding
 *
 * DESCRIPTION: set antibanding value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAntibanding(const QCameraParameters& params)
{
    const char *str = params.get(KEY_ANTIBANDING);
    const char *prev_str = get(KEY_ANTIBANDING);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setAntibanding(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setStatsDebugMask
 *
 * DESCRIPTION: get the value from persist file in Stats module that will
 *              control funtionality in the module
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setStatsDebugMask()
{
    uint32_t mask = 0;
    char value[PROPERTY_VALUE_MAX];

    property_get("persist.camera.stats.debug.mask", value, "0");
    mask = (uint32_t)atoi(value);

    LOGH("ctrl mask :%d", mask);

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_STATS_DEBUG_MASK, mask)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setPAAF
 *
 * DESCRIPTION: get the value from persist file in Stats module that will
 *              control the preview assisted AF in the module
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setPAAF()
{
    uint32_t paaf = 0;
    char value[PROPERTY_VALUE_MAX];

    property_get("persist.camera.stats.af.paaf", value, "1");
    paaf = (uint32_t)atoi(value);

    LOGH("PAAF is: %s", paaf ? "ON": "OFF");

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_STATS_AF_PAAF, paaf)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSceneDetect
 *
 * DESCRIPTION: set scenen detect value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSceneDetect(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_SCENE_DETECT);
    const char *prev_str = get(KEY_QC_SCENE_DETECT);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setSceneDetect(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setVideoHDR
 *
 * DESCRIPTION: set video HDR value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setVideoHDR(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_VIDEO_HDR);
    const char *prev_str = get(KEY_QC_VIDEO_HDR);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setVideoHDR(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setVtEnable
 *
 * DESCRIPTION: set vt Time Stamp enable from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setVtEnable(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_VT_ENABLE);
    const char *prev_str = get(KEY_QC_VT_ENABLE);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setVtEnable(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setFaceRecognition
 *
 * DESCRIPTION: set face recognition mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFaceRecognition(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_FACE_RECOGNITION);
    const char *prev_str = get(KEY_QC_FACE_RECOGNITION);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            uint32_t maxFaces = (uint32_t)params.getInt(KEY_QC_MAX_NUM_REQUESTED_FACES);
            return setFaceRecognition(str, maxFaces);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setZoom
 *
 * DESCRIPTION: set zoom value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setZoom(const QCameraParameters& params)
{
    if ((m_pCapability->zoom_supported == 0 ||
         m_pCapability->zoom_ratio_tbl_cnt == 0)) {
        LOGH("no zoom support");
        return NO_ERROR;
    }

    int zoomLevel = params.getInt(KEY_ZOOM);
    mParmZoomLevel = zoomLevel;
    if ((zoomLevel < 0) || (zoomLevel >= (int)m_pCapability->zoom_ratio_tbl_cnt)) {
        LOGE("invalid value %d out of (%d, %d)",
               zoomLevel,
              0, m_pCapability->zoom_ratio_tbl_cnt-1);
        return BAD_VALUE;
    }

    int prevZoomLevel = getInt(KEY_ZOOM);
    if (prevZoomLevel == zoomLevel) {
        LOGD("No value change in zoom %d %d", prevZoomLevel, zoomLevel);
        return NO_ERROR;
    }

    return setZoom(zoomLevel);
}

/*===========================================================================
 * FUNCTION   : setISOValue
 *
 * DESCRIPTION: set ISO value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setISOValue(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_ISO_MODE);
    const char *prev_str = get(KEY_QC_ISO_MODE);

    if(getManualCaptureMode()) {
        char iso_val[PROPERTY_VALUE_MAX];

        property_get("persist.camera.iso", iso_val, "");
        if (strlen(iso_val) > 0) {
            if (prev_str == NULL ||
                    strcmp(iso_val, prev_str) != 0) {
                return setISOValue(iso_val);
            }
        }
    } else if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setISOValue(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setContinuousISO
 *
 * DESCRIPTION: set ISO value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setContinuousISO(const char *isoValue)
{
    char iso[PROPERTY_VALUE_MAX];
    int32_t continous_iso = 0;

    // Check if continuous ISO is set through setproperty
    property_get("persist.camera.continuous.iso", iso, "");
    if (strlen(iso) > 0) {
        continous_iso = atoi(iso);
    } else {
        continous_iso = atoi(isoValue);
    }

    if ((continous_iso >= 0) &&
            (continous_iso <= m_pCapability->sensitivity_range.max_sensitivity)) {
        LOGH("Setting continuous ISO value %d", continous_iso);
        updateParamEntry(KEY_QC_CONTINUOUS_ISO, isoValue);

        cam_intf_parm_manual_3a_t iso_settings;
        memset(&iso_settings, 0, sizeof(cam_intf_parm_manual_3a_t));
        iso_settings.previewOnly = FALSE;
        iso_settings.value = continous_iso;
        if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ISO, iso_settings)) {
            return BAD_VALUE;
        }
        return NO_ERROR;
    }
    LOGE("Invalid iso value: %d", continous_iso);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setExposureTime
 *
 * DESCRIPTION: set exposure time from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setExposureTime(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_EXPOSURE_TIME);
    const char *prev_str = get(KEY_QC_EXPOSURE_TIME);
    if (str != NULL) {
        if (prev_str == NULL ||
                strcmp(str, prev_str) != 0) {
            return setExposureTime(str);
        }
    } else if(getManualCaptureMode()) {
        char expTime[PROPERTY_VALUE_MAX];

        property_get("persist.camera.exposure.time", expTime, "");
        if (strlen(expTime) > 0) {
            if (prev_str == NULL ||
                    strcmp(expTime, prev_str) != 0) {
                return setExposureTime(expTime);
            }
        }
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setVideoRotation
 *
 * DESCRIPTION: set rotation value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setVideoRotation(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_VIDEO_ROTATION);
    if(str != NULL) {
        int value = lookupAttr(VIDEO_ROTATION_MODES_MAP,
                PARAM_MAP_SIZE(VIDEO_ROTATION_MODES_MAP), str);
        if (value != NAME_NOT_FOUND) {
            updateParamEntry(KEY_QC_VIDEO_ROTATION, str);
            LOGL("setVideoRotation:   %d: ", str, value);
        } else {
            LOGE("Invalid rotation value: %d", value);
            return BAD_VALUE;
        }

    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setRotation
 *
 * DESCRIPTION: set rotation value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setRotation(const QCameraParameters& params)
{
    int32_t rotation = params.getInt(KEY_ROTATION);
    if (rotation != -1) {
        if (rotation == 0 || rotation == 90 ||
            rotation == 180 || rotation == 270) {
            set(KEY_ROTATION, rotation);

            ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_META_JPEG_ORIENTATION,
                    rotation);
            mRotation = rotation;
        } else {
            LOGE("Invalid rotation value: %d", rotation);
            return BAD_VALUE;
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setFlash
 *
 * DESCRIPTION: set flash mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFlash(const QCameraParameters& params)
{
    const char *str = params.get(KEY_FLASH_MODE);
    const char *prev_str = get(KEY_FLASH_MODE);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setFlash(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setAecLock
 *
 * DESCRIPTION: set AEC lock value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAecLock(const QCameraParameters& params)
{
    const char *str = params.get(KEY_AUTO_EXPOSURE_LOCK);
    const char *prev_str = get(KEY_AUTO_EXPOSURE_LOCK);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setAecLock(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setAwbLock
 *
 * DESCRIPTION: set AWB lock from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAwbLock(const QCameraParameters& params)
{
    const char *str = params.get(KEY_AUTO_WHITEBALANCE_LOCK);
    const char *prev_str = get(KEY_AUTO_WHITEBALANCE_LOCK);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setAwbLock(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setAutoHDR
 *
 * DESCRIPTION: Enable/disable auto HDR
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAutoHDR(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_AUTO_HDR_ENABLE);
    const char *prev_str = get(KEY_QC_AUTO_HDR_ENABLE);
    char prop[PROPERTY_VALUE_MAX];

    memset(prop, 0, sizeof(prop));
    property_get("persist.camera.auto.hdr.enable", prop, VALUE_DISABLE);
    if (str != NULL) {
       if (prev_str == NULL ||
           strcmp(str, prev_str) != 0) {
           LOGH("Auto HDR set to: %s", str);
           return updateParamEntry(KEY_QC_AUTO_HDR_ENABLE, str);
       }
    } else {
       if (prev_str == NULL ||
           strcmp(prev_str, prop) != 0 ) {
           LOGH("Auto HDR set to: %s", prop);
           updateParamEntry(KEY_QC_AUTO_HDR_ENABLE, prop);
       }
    }

       return NO_ERROR;
}

/*===========================================================================
* FUNCTION   : isAutoHDREnabled
*
* DESCRIPTION: Query auto HDR status
*
* PARAMETERS : None
*
* RETURN     : bool true/false
*==========================================================================*/
bool QCameraParameters::isAutoHDREnabled()
{
    const char *str = get(KEY_QC_AUTO_HDR_ENABLE);
    if (str != NULL) {
        int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), str);
        if (value == NAME_NOT_FOUND) {
            LOGE("Invalid Auto HDR value %s", str);
            return false;
        }

        LOGH("Auto HDR status is: %d", value);
        return value ? true : false;
    }

    LOGH("Auto HDR status not set!");
    return false;
}

/*===========================================================================
 * FUNCTION   : setMCEValue
 *
 * DESCRIPTION: set memory color enhancement value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setMCEValue(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_MEMORY_COLOR_ENHANCEMENT);
    const char *prev_str = get(KEY_QC_MEMORY_COLOR_ENHANCEMENT);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setMCEValue(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setDISValue
 *
 * DESCRIPTION: enable/disable DIS from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setDISValue(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_DIS);
    const char *prev_str = get(KEY_QC_DIS);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setDISValue(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setLensShadeValue
 *
 * DESCRIPTION: set lens shade value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setLensShadeValue(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_LENSSHADE);
    const char *prev_str = get(KEY_QC_LENSSHADE);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setLensShadeValue(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setFocusAreas
 *
 * DESCRIPTION: set focus areas from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFocusAreas(const QCameraParameters& params)
{
    const char *str = params.get(KEY_FOCUS_AREAS);

    if (getRelatedCamSyncInfo()->mode == CAM_MODE_SECONDARY) {
        // Ignore focus areas for secondary camera
        LOGH("Ignore focus areas for secondary camera!! ");
        return NO_ERROR;
    }
    if (str != NULL) {
        int max_num_af_areas = getInt(KEY_MAX_NUM_FOCUS_AREAS);
        if(max_num_af_areas == 0) {
            LOGE("max num of AF area is 0, cannot set focus areas");
            return BAD_VALUE;
        }

        const char *prev_str = get(KEY_FOCUS_AREAS);
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setFocusAreas(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setMeteringAreas
 *
 * DESCRIPTION: set metering areas from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setMeteringAreas(const QCameraParameters& params)
{
    const char *str = params.get(KEY_METERING_AREAS);
    if (str != NULL) {
        int max_num_mtr_areas = getInt(KEY_MAX_NUM_METERING_AREAS);
        if(max_num_mtr_areas == 0) {
            LOGE("max num of metering areas is 0, cannot set focus areas");
            return BAD_VALUE;
        }

        const char *prev_str = get(KEY_METERING_AREAS);
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0 ||
            (m_bNeedRestart == true)) {
            return setMeteringAreas(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSceneMode
 *
 * DESCRIPTION: set scenen mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSceneMode(const QCameraParameters& params)
{
    const char *str = params.get(KEY_SCENE_MODE);
    const char *prev_str = get(KEY_SCENE_MODE);
    LOGH("str - %s, prev_str - %s", str, prev_str);

    // HDR & Recording are mutually exclusive and so disable HDR if recording hint is set
    if (m_bRecordingHint_new && m_bHDREnabled) {
        LOGH("Disable the HDR and set it to Auto");
        str = SCENE_MODE_AUTO;
        m_bLocalHDREnabled = true;
    } else if (!m_bRecordingHint_new && m_bLocalHDREnabled) {
        LOGH("Restore the HDR from Auto scene mode");
        str = SCENE_MODE_HDR;
        m_bLocalHDREnabled = false;
    }

    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {

            if(strcmp(str, SCENE_MODE_AUTO) == 0) {
                m_bSceneTransitionAuto = true;
            }
            if (strcmp(str, SCENE_MODE_HDR) == 0) {

                // If HDR is set from client  and the feature is not enabled in the backend, ignore it.
                if (m_bHDRModeSensor && isSupportedSensorHdrSize(params)) {
                    m_bSensorHDREnabled = true;
                    LOGH("Sensor HDR mode Enabled");
                } else {
                    m_bHDREnabled = true;
                    LOGH("S/W HDR Enabled");
                }
            } else {
                m_bHDREnabled = false;
                if (m_bSensorHDREnabled) {
                    m_bSensorHDREnabled = false;
                    m_bNeedRestart = true;
                    setSensorSnapshotHDR("off");
                }
            }

            if (m_bSensorHDREnabled) {
                setSensorSnapshotHDR("on");
                m_bNeedRestart = true;
            } else if ((m_bHDREnabled) ||
                ((prev_str != NULL) && (strcmp(prev_str, SCENE_MODE_HDR) == 0))) {
                LOGH("scene mode changed between HDR and non-HDR, need restart");
                m_bNeedRestart = true;
            }

            return setSceneMode(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSelectableZoneAf
 *
 * DESCRIPTION: set selectable zone auto focus value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSelectableZoneAf(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_SELECTABLE_ZONE_AF);
    const char *prev_str = get(KEY_QC_SELECTABLE_ZONE_AF);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setSelectableZoneAf(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setAEBracket
 *
 * DESCRIPTION: set AE bracket from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAEBracket(const QCameraParameters& params)
{
    if (isHDREnabled()) {
        LOGH("scene mode is HDR, overwrite AE bracket setting to off");
        return setAEBracket(AE_BRACKET_OFF);
    }

    const char *expStr = params.get(KEY_QC_CAPTURE_BURST_EXPOSURE);
    if (NULL != expStr && strlen(expStr) > 0) {
        set(KEY_QC_CAPTURE_BURST_EXPOSURE, expStr);
    } else {
        char prop[PROPERTY_VALUE_MAX];
        memset(prop, 0, sizeof(prop));
        property_get("persist.capture.burst.exposures", prop, "");
        if (strlen(prop) > 0) {
            set(KEY_QC_CAPTURE_BURST_EXPOSURE, prop);
        } else {
            remove(KEY_QC_CAPTURE_BURST_EXPOSURE);
        }
    }

    const char *str = params.get(KEY_QC_AE_BRACKET_HDR);
    const char *prev_str = get(KEY_QC_AE_BRACKET_HDR);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setAEBracket(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setAFBracket
 *
 * DESCRIPTION: set AF bracket from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAFBracket(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask &
            (CAM_QCOM_FEATURE_REFOCUS | CAM_QCOM_FEATURE_UBIFOCUS)) == 0) {
        LOGH("AF Bracketing is not supported");
        return NO_ERROR;
    }
    const char *str = params.get(KEY_QC_AF_BRACKET);
    const char *prev_str = get(KEY_QC_AF_BRACKET);
    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            m_bNeedRestart = true;
            return setAFBracket(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setReFocus
 *
 * DESCRIPTION: set refocus from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setReFocus(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask &
            (CAM_QCOM_FEATURE_REFOCUS | CAM_QCOM_FEATURE_UBIFOCUS)) == 0) {
        LOGD("AF Bracketing is not supported");
        return NO_ERROR;
    }
    const char *str = params.get(KEY_QC_RE_FOCUS);
    const char *prev_str = get(KEY_QC_RE_FOCUS);
    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            m_bNeedRestart = true;
            return setReFocus(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setChromaFlash
 *
 * DESCRIPTION: set chroma flash from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setChromaFlash(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask &
        CAM_QCOM_FEATURE_CHROMA_FLASH) == 0) {
        LOGH("Chroma Flash is not supported");
        return NO_ERROR;
    }
    const char *str = params.get(KEY_QC_CHROMA_FLASH);
    const char *prev_str = get(KEY_QC_CHROMA_FLASH);
    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            m_bNeedRestart = true;
            return setChromaFlash(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setOptiZoom
 *
 * DESCRIPTION: set opti zoom from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setOptiZoom(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask &
        CAM_QCOM_FEATURE_OPTIZOOM) == 0){
        LOGH("Opti Zoom is not supported");
        return NO_ERROR;
    }
    const char *str = params.get(KEY_QC_OPTI_ZOOM);
    const char *prev_str = get(KEY_QC_OPTI_ZOOM);
    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            m_bNeedRestart = true;
            return setOptiZoom(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setTruePortrait
 *
 * DESCRIPTION: set true portrait from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setTruePortrait(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask &
            CAM_QCOM_FEATURE_TRUEPORTRAIT) == 0) {
        LOGD("True Portrait is not supported");
        return NO_ERROR;
    }
    const char *str = params.get(KEY_QC_TRUE_PORTRAIT);
    const char *prev_str = get(KEY_QC_TRUE_PORTRAIT);
    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setTruePortrait(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setHDRMode
 *
 * DESCRIPTION: set HDR mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setHDRMode(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_HDR_MODE);
    const char *prev_str = get(KEY_QC_HDR_MODE);
    uint32_t supported_hdr_modes = m_pCapability->qcom_supported_feature_mask &
          (CAM_QCOM_FEATURE_SENSOR_HDR | CAM_QCOM_FEATURE_HDR);

    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if ((CAM_QCOM_FEATURE_SENSOR_HDR == supported_hdr_modes) &&
                (strncmp(str, HDR_MODE_SENSOR, strlen(HDR_MODE_SENSOR)))) {
            LOGH("Only sensor HDR is supported");
            return NO_ERROR;
        } else if  ((CAM_QCOM_FEATURE_HDR == supported_hdr_modes) &&
                (strncmp(str, HDR_MODE_SENSOR, strlen(HDR_MODE_MULTI_FRAME)))) {
            LOGH("Only multi frame HDR is supported");
            return NO_ERROR;
        } else if (!supported_hdr_modes) {
            LOGH("HDR is not supported");
            return NO_ERROR;
        }
        if (prev_str == NULL ||
                strcmp(str, prev_str) != 0) {
            return setHDRMode(str);
        }
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setHDRNeed1x
 *
 * DESCRIPTION: set HDR need 1x from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setHDRNeed1x(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_HDR_NEED_1X);
    const char *prev_str = get(KEY_QC_HDR_NEED_1X);

    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if (m_bHDRModeSensor) {
            LOGH("Only multi frame HDR supports 1x frame");
            return NO_ERROR;
        }
        if ((prev_str == NULL) || (strcmp(str, prev_str) != 0)) {
            return setHDRNeed1x(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSeeMore
 *
 * DESCRIPTION: set see more (llvd) from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSeeMore(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask &
            CAM_QCOM_FEATURE_LLVD) == 0) {
        LOGD("See more is not supported");
        return NO_ERROR;
    }
    const char *str = params.get(KEY_QC_SEE_MORE);
    const char *prev_str = get(KEY_QC_SEE_MORE);
    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if (prev_str == NULL || strcmp(str, prev_str) != 0) {
            m_bNeedRestart = true;
            return setSeeMore(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setNoiseReductionMode
 *
 * DESCRIPTION: set noise reduction mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setNoiseReductionMode(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask & CAM_QTI_FEATURE_SW_TNR) == 0) {
        LOGD("SW TNR is not supported");
        return NO_ERROR;
    }
    const char *str = params.get(KEY_QC_NOISE_REDUCTION_MODE);
    const char *prev_str = get(KEY_QC_NOISE_REDUCTION_MODE);
    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if (prev_str == NULL || strcmp(str, prev_str) != 0) {
            m_bNeedRestart = true;
            return setNoiseReductionMode(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setStillMore
 *
 * DESCRIPTION: set stillmore from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setStillMore(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask &
            CAM_QCOM_FEATURE_STILLMORE) == 0) {
        LOGD("Stillmore is not supported");
        return NO_ERROR;
    }
    const char *str = params.get(KEY_QC_STILL_MORE);
    const char *prev_str = get(KEY_QC_STILL_MORE);
    LOGH("str =%s & prev_str =%s", str, prev_str);
    if (str != NULL) {
        if (prev_str == NULL || strcmp(str, prev_str) != 0) {
            m_bNeedRestart = true;
            return setStillMore(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setRedeyeReduction
 *
 * DESCRIPTION: set red eye reduction setting from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setRedeyeReduction(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_REDEYE_REDUCTION);
    const char *prev_str = get(KEY_QC_REDEYE_REDUCTION);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setRedeyeReduction(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setGpsLocation
 *
 * DESCRIPTION: set GPS location information from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setGpsLocation(const QCameraParameters& params)
{
    const char *method = params.get(KEY_GPS_PROCESSING_METHOD);
    if (method) {
        set(KEY_GPS_PROCESSING_METHOD, method);
    }else {
        remove(KEY_GPS_PROCESSING_METHOD);
    }

    const char *latitude = params.get(KEY_GPS_LATITUDE);
    if (latitude) {
        set(KEY_GPS_LATITUDE, latitude);
    }else {
        remove(KEY_GPS_LATITUDE);
    }

    const char *latitudeRef = params.get(KEY_QC_GPS_LATITUDE_REF);
    if (latitudeRef) {
        set(KEY_QC_GPS_LATITUDE_REF, latitudeRef);
    }else {
        remove(KEY_QC_GPS_LATITUDE_REF);
    }

    const char *longitude = params.get(KEY_GPS_LONGITUDE);
    if (longitude) {
        set(KEY_GPS_LONGITUDE, longitude);
    }else {
        remove(KEY_GPS_LONGITUDE);
    }

    const char *longitudeRef = params.get(KEY_QC_GPS_LONGITUDE_REF);
    if (longitudeRef) {
        set(KEY_QC_GPS_LONGITUDE_REF, longitudeRef);
    }else {
        remove(KEY_QC_GPS_LONGITUDE_REF);
    }

    const char *altitudeRef = params.get(KEY_QC_GPS_ALTITUDE_REF);
    if (altitudeRef) {
        set(KEY_QC_GPS_ALTITUDE_REF, altitudeRef);
    }else {
        remove(KEY_QC_GPS_ALTITUDE_REF);
    }

    const char *altitude = params.get(KEY_GPS_ALTITUDE);
    if (altitude) {
        set(KEY_GPS_ALTITUDE, altitude);
    }else {
        remove(KEY_GPS_ALTITUDE);
    }

    const char *status = params.get(KEY_QC_GPS_STATUS);
    if (status) {
        set(KEY_QC_GPS_STATUS, status);
    } else {
        remove(KEY_QC_GPS_STATUS);
    }

    const char *timestamp = params.get(KEY_GPS_TIMESTAMP);
    if (timestamp) {
        set(KEY_GPS_TIMESTAMP, timestamp);
    }else {
        remove(KEY_GPS_TIMESTAMP);
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setNumOfSnapshot
 *
 * DESCRIPTION: set number of snapshot per shutter from user setting
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setNumOfSnapshot()
{
    int nBurstNum = 1;
    int nExpnum = 0;

    const char *bracket_str = get(KEY_QC_AE_BRACKET_HDR);
    if (bracket_str != NULL && strlen(bracket_str) > 0) {
        int value = lookupAttr(BRACKETING_MODES_MAP, PARAM_MAP_SIZE(BRACKETING_MODES_MAP),
                bracket_str);
        switch (value) {
        case CAM_EXP_BRACKETING_ON:
            {
                nExpnum = 0;
                const char *str_val = get(KEY_QC_CAPTURE_BURST_EXPOSURE);
                if ((str_val != NULL) && (strlen(str_val) > 0)) {
                    char prop[PROPERTY_VALUE_MAX];
                    memset(prop, 0, sizeof(prop));
                    strlcpy(prop, str_val, PROPERTY_VALUE_MAX);
                    char *saveptr = NULL;
                    char *token = strtok_r(prop, ",", &saveptr);
                    while (token != NULL) {
                        token = strtok_r(NULL, ",", &saveptr);
                        nExpnum++;
                    }
                }
                if (nExpnum == 0) {
                    nExpnum = 1;
                }
            }
            break;
        default:
            nExpnum = 1 + getNumOfExtraHDROutBufsIfNeeded();
            break;
        }
    }

    if (isUbiRefocus()) {
        nBurstNum = m_pCapability->refocus_af_bracketing_need.output_count + 1;
    }

    LOGH("nBurstNum = %d, nExpnum = %d", nBurstNum, nExpnum);
    set(KEY_QC_NUM_SNAPSHOT_PER_SHUTTER, nBurstNum * nExpnum);
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setRecordingHint
 *
 * DESCRIPTION: set recording hint value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setRecordingHint(const QCameraParameters& params)
{
    const char * str = params.get(KEY_RECORDING_HINT);
    const char *prev_str = get(KEY_RECORDING_HINT);
    if (str != NULL) {
        if (prev_str == NULL || strcmp(str, prev_str) != 0) {
            int32_t value = lookupAttr(TRUE_FALSE_MODES_MAP, PARAM_MAP_SIZE(TRUE_FALSE_MODES_MAP),
                    str);
            if(value != NAME_NOT_FOUND){
                updateParamEntry(KEY_RECORDING_HINT, str);
                setRecordingHintValue(value);
                if (getFaceDetectionOption() == true) {
                    if (!fdModeInVideo()) {
                        setFaceDetection(value > 0 ? false : true, false);
                    } else {
                        setFaceDetection(true, false);
                    }
                }
                if (m_bDISEnabled) {
                    LOGH("Setting DIS value again");
                    setDISValue(VALUE_ENABLE);
                }
                return NO_ERROR;
            } else {
                LOGE("Invalid recording hint value: %s", str);
                return BAD_VALUE;
            }
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setNoDisplayMode
 *
 * DESCRIPTION: set no display mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setNoDisplayMode(const QCameraParameters& params)
{
    const char *str_val  = params.get(KEY_QC_NO_DISPLAY_MODE);
    const char *prev_str = get(KEY_QC_NO_DISPLAY_MODE);
    char prop[PROPERTY_VALUE_MAX];
    LOGD("str_val: %s, prev_str: %s", str_val, prev_str);

    // Aux Camera Mode, set no display mode
    if (m_relCamSyncInfo.mode == CAM_MODE_SECONDARY) {
        if (!m_bNoDisplayMode) {
            set(KEY_QC_NO_DISPLAY_MODE, 1);
            m_bNoDisplayMode = true;
            m_bNeedRestart = true;
        }
        return NO_ERROR;
    }

    if(str_val && strlen(str_val) > 0) {
        if (prev_str == NULL || strcmp(str_val, prev_str) != 0) {
            m_bNoDisplayMode = atoi(str_val);
            set(KEY_QC_NO_DISPLAY_MODE, str_val);
            m_bNeedRestart = true;
        }
    } else {
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.no-display", prop, "0");
        m_bNoDisplayMode = atoi(prop);
    }
    LOGH("Param m_bNoDisplayMode = %d", m_bNoDisplayMode);
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setZslMode
 *
 * DESCRIPTION: set ZSL mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setZslMode(const QCameraParameters& params)
{
    const char *str_val  = params.get(KEY_QC_ZSL);
    const char *prev_val  = get(KEY_QC_ZSL);
    int32_t rc = NO_ERROR;

    if(m_bForceZslMode) {
        if (!m_bZslMode) {
            // Force ZSL mode to ON
            set(KEY_QC_ZSL, VALUE_ON);
            setZslMode(TRUE);
            LOGH("ZSL Mode forced to be enabled");
        }
    } else if (str_val != NULL) {
        if (prev_val == NULL || strcmp(str_val, prev_val) != 0) {
            int32_t value = lookupAttr(ON_OFF_MODES_MAP, PARAM_MAP_SIZE(ON_OFF_MODES_MAP),
                    str_val);
            if (value != NAME_NOT_FOUND) {
                set(KEY_QC_ZSL, str_val);
                rc = setZslMode(value);
                // ZSL mode changed, need restart preview
                m_bNeedRestart = true;
            } else {
                LOGE("Invalid ZSL mode value: %s", str_val);
                rc = BAD_VALUE;
            }
        }
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : setZslMode
 *
 * DESCRIPTION: set ZSL mode from user setting
 *
 * PARAMETERS :
 *   @value  : ZSL mode value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setZslMode(bool value)
{
    int32_t rc = NO_ERROR;
    if(m_bForceZslMode) {
        if (!m_bZslMode) {
            // Force ZSL mode to ON
            set(KEY_QC_ZSL, VALUE_ON);
            m_bZslMode_new = true;
            m_bZslMode = true;
            m_bNeedRestart = true;

            int32_t value = m_bForceZslMode;
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ZSL_MODE, value)) {
                rc = BAD_VALUE;
            }

            LOGI("ZSL Mode forced to be enabled");
        }
    } else {
        LOGI("ZSL Mode  -> %s", m_bZslMode_new ? "Enabled" : "Disabled");
        m_bZslMode_new = (value > 0)? true : false;
        if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ZSL_MODE, value)) {
            rc = BAD_VALUE;
        }
    }
    LOGH("enabled: %d rc = %d", m_bZslMode_new, rc);
    return rc;
}

/*===========================================================================
 * FUNCTION   : updateZSLModeValue
 *
 * DESCRIPTION: update zsl mode value locally and to daemon
 *
 * PARAMETERS :
 *   @value   : zsl mode value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateZSLModeValue(bool value)
{
    int32_t rc = NO_ERROR;
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    rc = setZslMode(value);
    if (rc != NO_ERROR) {
        LOGE("Failed to ZSL value");
        return rc;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to update recording hint");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setWaveletDenoise
 *
 * DESCRIPTION: set wavelet denoise value from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setWaveletDenoise(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_DENOISE);
    const char *prev_str = get(KEY_QC_DENOISE);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setWaveletDenoise(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setTemporalDenoise
 *
 * DESCRIPTION: set temporal denoise value from properties
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setTemporalDenoise(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask & CAM_QCOM_FEATURE_CPP_TNR) == 0) {
        LOGH("TNR is not supported");
        return NO_ERROR;
    }

    const char *str = params.get(KEY_QC_TNR_MODE);
    const char *prev_str = get(KEY_QC_TNR_MODE);
    const char *video_str = params.get(KEY_QC_VIDEO_TNR_MODE);
    const char *video_prev_str = get(KEY_QC_VIDEO_TNR_MODE);
    char video_value[PROPERTY_VALUE_MAX];
    char preview_value[PROPERTY_VALUE_MAX];
    bool prev_video_tnr = m_bTNRVideoOn;
    bool prev_preview_tnr = m_bTNRPreviewOn;
    bool prev_snap_tnr = m_bTNRSnapshotOn;

    char value[PROPERTY_VALUE_MAX];
    memset(value, 0, sizeof(value));
    property_get("persist.camera.tnr_cds", value, "0");
    uint8_t tnr_cds = (uint8_t)atoi(value);

    if (m_bRecordingHint_new == true) {
        if (video_str) {
            if ((video_prev_str == NULL) || (strcmp(video_str, video_prev_str) != 0)) {
                if (!strcmp(video_str, VALUE_ON)) {
                    m_bTNRVideoOn = true;
                    m_bTNRPreviewOn = true;
                } else {
                    m_bTNRVideoOn = false;
                    m_bTNRPreviewOn = false;
                }
                updateParamEntry(KEY_QC_VIDEO_TNR_MODE, video_str);
            } else {
                return NO_ERROR;
            }
        }
    } else {
        if (str) {
            if ((prev_str == NULL) || (strcmp(str, prev_str) != 0)) {
                if (!strcmp(str, VALUE_ON)) {
                    m_bTNRPreviewOn = true;
                } else {
                    m_bTNRPreviewOn = false;
                }
                updateParamEntry(KEY_QC_TNR_MODE, str);
            } else {
                return NO_ERROR;
            }
        }
    }

    //Read setprops only if UI is not present or disabled.
    if ((m_bRecordingHint_new == true)
            && ((video_str == NULL)
            || (strcmp(video_str, VALUE_ON)))) {
        memset(video_value, 0, sizeof(video_value));
        property_get("persist.camera.tnr.video", video_value, VALUE_OFF);
        if (!strcmp(video_value, VALUE_ON)) {
            m_bTNRVideoOn = true;
        } else {
            m_bTNRVideoOn = false;
        }
        updateParamEntry(KEY_QC_VIDEO_TNR_MODE, video_value);

        memset(preview_value, 0, sizeof(preview_value));
        property_get("persist.camera.tnr.preview", preview_value, VALUE_OFF);
        if (!strcmp(preview_value, VALUE_ON)) {
            m_bTNRPreviewOn = true;
        } else {
            m_bTNRPreviewOn = false;
        }
        updateParamEntry(KEY_QC_TNR_MODE, preview_value);
    } else if ((m_bRecordingHint_new != true)
            && ((str == NULL) || (strcmp(str, VALUE_ON)))) {
        memset(preview_value, 0, sizeof(preview_value));
        property_get("persist.camera.tnr.preview", preview_value, VALUE_OFF);
        if (!strcmp(preview_value, VALUE_ON)) {
            m_bTNRPreviewOn = true;
        } else {
            m_bTNRPreviewOn = false;
        }
        updateParamEntry(KEY_QC_TNR_MODE, preview_value);
    }

    memset(value, 0, sizeof(value));
    property_get("persist.camera.tnr.snapshot", value, VALUE_OFF);
    if (!strcmp(value, VALUE_ON)) {
        m_bTNRSnapshotOn = true;
        LOGD("TNR enabled for SNAPSHOT stream");
    } else {
        m_bTNRSnapshotOn = false;
    }

    cam_denoise_param_t temp;
    memset(&temp, 0, sizeof(temp));
    if (m_bTNRVideoOn || m_bTNRPreviewOn || m_bTNRSnapshotOn) {
        temp.denoise_enable = 1;
        temp.process_plates = getDenoiseProcessPlate(
                CAM_INTF_PARM_TEMPORAL_DENOISE);

        if (!tnr_cds) {
            int32_t cds_mode = lookupAttr(CDS_MODES_MAP,
                    PARAM_MAP_SIZE(CDS_MODES_MAP), CDS_MODE_OFF);

            if (cds_mode != NAME_NOT_FOUND) {
                updateParamEntry(KEY_QC_VIDEO_CDS_MODE, CDS_MODE_OFF);
                if (m_bTNRPreviewOn) {
                    updateParamEntry(KEY_QC_CDS_MODE, CDS_MODE_OFF);
                }
                if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
                        CAM_INTF_PARM_CDS_MODE, cds_mode)) {
                    LOGE("Failed CDS MODE to update table");
                    return BAD_VALUE;
                }
                LOGD("CDS is set to = %s when TNR is enabled",
                         CDS_MODE_OFF);
                mCds_mode = cds_mode;
            } else {
                LOGE("Invalid argument for video CDS MODE %d",
                         cds_mode);
            }
        } else {
            LOGH("Enabled TNR with CDS");
        }
    }

    if ((m_bTNRVideoOn != prev_video_tnr)
            || (m_bTNRPreviewOn != prev_preview_tnr)
            || (prev_snap_tnr != m_bTNRSnapshotOn)) {
        LOGD("TNR enabled = %d, plates = %d",
                temp.denoise_enable, temp.process_plates);
        if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
                CAM_INTF_PARM_TEMPORAL_DENOISE, temp)) {
            return BAD_VALUE;
        }
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setCameraMode
 *
 * DESCRIPTION: set camera mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setCameraMode(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_CAMERA_MODE);
    if (str != NULL) {
        set(KEY_QC_CAMERA_MODE, str);
    } else {
        remove(KEY_QC_CAMERA_MODE);
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSceneSelectionMode
 *
 * DESCRIPTION: set scene selection mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSceneSelectionMode(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_SCENE_SELECTION);
    const char *prev_str = get(KEY_QC_SCENE_SELECTION);
    if (NULL != str) {
        if ((NULL == prev_str) || (strcmp(str, prev_str) != 0)) {
            int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                    PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), str);
            if (value != NAME_NOT_FOUND) {
                LOGD("Setting selection value %s", str);
                if (value && m_bZslMode_new) {
                    updateParamEntry(KEY_QC_SCENE_SELECTION, str);
                    m_bNeedRestart = true;
                    m_bSceneSelection = true;
                } else if (!value) {
                    updateParamEntry(KEY_QC_SCENE_SELECTION, str);
                    m_bNeedRestart = true;
                    m_bSceneSelection = false;
                } else {
                    LOGE("Trying to enable scene selection in non ZSL mode!!!");
                    return BAD_VALUE;
                }
            } else {
                LOGE("Trying to configure invalid scene selection value: %s",
                        str);
                return BAD_VALUE;
            }
        }
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSelectedScene
 *
 * DESCRIPTION: select specific scene
 *
 * PARAMETERS :
 *   @scene   : scene mode
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSelectedScene(cam_scene_mode_type scene)
{
    Mutex::Autolock l(m_SceneSelectLock);
    m_SelectedScene = scene;
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : getSelectedScene
 *
 * DESCRIPTION: get selected scene
 *
 * PARAMETERS :
 *
 * RETURN     : currently selected scene
 *==========================================================================*/
cam_scene_mode_type QCameraParameters::getSelectedScene()
{
    Mutex::Autolock l(m_SceneSelectLock);
    return m_SelectedScene;
}

/*==========================================================
 * FUNCTION   : setRdiMode
 *
 * DESCRIPTION: set Rdi mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *===========================================================*/
int32_t QCameraParameters::setRdiMode(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_RDI_MODE);
    const char *prev_str = get(KEY_QC_RDI_MODE);
    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));

    property_get("persist.camera.rdi.mode", prop, VALUE_DISABLE);
    if ((str != NULL) && (prev_str == NULL || strcmp(str, prev_str) != 0)) {
        LOGD("RDI mode set to %s", str);
        setRdiMode(str);
    } else if (prev_str == NULL || strcmp(prev_str, prop) != 0 ) {
        LOGD("RDI mode set to prop: %s", prop);
        setRdiMode(prop);
    }
    return NO_ERROR;
}

/*==========================================================
 * FUNCTION   : setSecureMode
 *
 * DESCRIPTION: set secure mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *===========================================================*/

int32_t QCameraParameters::setSecureMode(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_SECURE_MODE);
    const char *prev_str = get(KEY_QC_SECURE_MODE);
    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));

    property_get("persist.camera.secure.mode", prop, VALUE_DISABLE);
    if ((str != NULL) && (prev_str == NULL || strcmp(str, prev_str) != 0)) {
        LOGD("Secure mode set to KEY: %s", str);
        setSecureMode(str);
    } else if (prev_str == NULL || strcmp(prev_str, prop) != 0 ) {
        LOGD("Secure mode set to prop: %s", prop);
        setSecureMode(prop);
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setZslAttributes
 *
 * DESCRIPTION: set ZSL related attributes from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setZslAttributes(const QCameraParameters& params)
{
    // TODO: may switch to pure param instead of sysprop
    char prop[PROPERTY_VALUE_MAX];

    const char *str = params.get(KEY_QC_ZSL_BURST_INTERVAL);
    if (str != NULL) {
        set(KEY_QC_ZSL_BURST_INTERVAL, str);
    } else {
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.zsl.interval", prop, "1");
        set(KEY_QC_ZSL_BURST_INTERVAL, prop);
        LOGH("burst interval: %s", prop);
    }

    str = params.get(KEY_QC_ZSL_BURST_LOOKBACK);
    if (str != NULL) {
        set(KEY_QC_ZSL_BURST_LOOKBACK, str);
    } else {
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.zsl.backlookcnt", prop, "2");
        uint32_t look_back_cnt = atoi(prop);
        if (m_bFrameSyncEnabled) {
            look_back_cnt += EXTRA_FRAME_SYNC_BUFFERS;
        }
        set(KEY_QC_ZSL_BURST_LOOKBACK, look_back_cnt);
        LOGH("look back count: %s", prop);
    }

    str = params.get(KEY_QC_ZSL_QUEUE_DEPTH);
    if (str != NULL) {
        set(KEY_QC_ZSL_QUEUE_DEPTH, str);
    } else {
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.zsl.queuedepth", prop, "2");
        uint32_t queue_depth = atoi(prop);
        if (m_bFrameSyncEnabled) {
            queue_depth += EXTRA_FRAME_SYNC_BUFFERS;
        }
        set(KEY_QC_ZSL_QUEUE_DEPTH, queue_depth);
        LOGH("queue depth: %s", prop);
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setFlip
 *
 * DESCRIPTION: set preview/ video/ picture flip mode from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFlip(const QCameraParameters& params)
{
    if ((m_pCapability->qcom_supported_feature_mask & CAM_QCOM_FEATURE_FLIP) == 0) {
        LOGH("flip is not supported.");
        return NO_ERROR;
    }

    //check preview flip setting
    const char *str = params.get(KEY_QC_PREVIEW_FLIP);
    const char *prev_val = get(KEY_QC_PREVIEW_FLIP);
    if(str != NULL){
        if (prev_val == NULL || strcmp(str, prev_val) != 0) {
            int32_t value = lookupAttr(FLIP_MODES_MAP, PARAM_MAP_SIZE(FLIP_MODES_MAP), str);
            if(value != NAME_NOT_FOUND){
                set(KEY_QC_PREVIEW_FLIP, str);
                m_bPreviewFlipChanged = true;
            }
        }
    }

    // check video filp setting
    str = params.get(KEY_QC_VIDEO_FLIP);
    prev_val = get(KEY_QC_VIDEO_FLIP);
    if(str != NULL){
        if (prev_val == NULL || strcmp(str, prev_val) != 0) {
            int32_t value = lookupAttr(FLIP_MODES_MAP, PARAM_MAP_SIZE(FLIP_MODES_MAP), str);
            if(value != NAME_NOT_FOUND){
                set(KEY_QC_VIDEO_FLIP, str);
                m_bVideoFlipChanged = true;
            }
        }
    }

    // check picture filp setting
    str = params.get(KEY_QC_SNAPSHOT_PICTURE_FLIP);
    prev_val = get(KEY_QC_SNAPSHOT_PICTURE_FLIP);
    if(str != NULL){
        if (prev_val == NULL || strcmp(str, prev_val) != 0) {
            int32_t value = lookupAttr(FLIP_MODES_MAP, PARAM_MAP_SIZE(FLIP_MODES_MAP), str);
            if(value != NAME_NOT_FOUND){
                set(KEY_QC_SNAPSHOT_PICTURE_FLIP, str);
                m_bSnapshotFlipChanged = true;
            }
        }
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSnapshotFDReq
 *
 * DESCRIPTION: set requirement of Face Detection Metadata in Snapshot mode.
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSnapshotFDReq(const QCameraParameters& params)
{
    char prop[PROPERTY_VALUE_MAX];
    const char *str = params.get(KEY_QC_SNAPSHOT_FD_DATA);

    if(str != NULL){
        set(KEY_QC_SNAPSHOT_FD_DATA, str);
    }else{
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.snapshot.fd", prop, "0");
        set(KEY_QC_SNAPSHOT_FD_DATA, prop);
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setMobicat
 *
 * DESCRIPTION: set Mobicat on/off.
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setMobicat(const QCameraParameters& )
{
    char value [PROPERTY_VALUE_MAX];
    property_get("persist.camera.mobicat", value, "0");
    int32_t ret = NO_ERROR;
    uint8_t enableMobi = (uint8_t)atoi(value);

    if (enableMobi) {
        tune_cmd_t tune_cmd;
        tune_cmd.type = 2;
        tune_cmd.module = 0;
        tune_cmd.value = 1;
        if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_SET_VFE_COMMAND, tune_cmd)) {
            return BAD_VALUE;
        }
        if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_SET_PP_COMMAND, tune_cmd)) {
            ret = BAD_VALUE;
        }
    }
    m_MobiMask = enableMobi;

    return ret;
}

/*===========================================================================
 * FUNCTION   : setLongshotParam
 *
 * DESCRIPTION: set Longshot on/off.
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setLongshotParam(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_LONG_SHOT);
    const char *prev_str = get(KEY_QC_LONG_SHOT);

    if (str != NULL) {
        if (prev_str == NULL || strcmp(str, prev_str) != 0) {
            set(KEY_QC_LONG_SHOT, str);
            if (prev_str && !strcmp(str, "off") && !strcmp(prev_str, "on")) {
                // We restart here, to reset the FPS and no
                // of buffers as per the requirement of single snapshot usecase.
                // Here restart happens when continuous shot is changed to off from on.
                // In case of continuous shot on, restart is taken care when actual
                // longshot command is triggered through sendCommand.
                m_bNeedRestart = true;
            }
        }
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : checkFeatureConcurrency
 *
 * DESCRIPTION: check if there is a feature concurrency issue with advanced
 *              camera features
 *
 * PARAMETERS : None
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::checkFeatureConcurrency()
{
    int32_t rc = NO_ERROR;
    uint32_t advancedFeatEnableBit = 0;

    if (isStillMoreEnabled()) {
        advancedFeatEnableBit |= CAM_QCOM_FEATURE_STILLMORE;
    }
    if (isHDREnabled()) {
        advancedFeatEnableBit |= CAM_QCOM_FEATURE_HDR;
    }
    if (isChromaFlashEnabled()) {
        advancedFeatEnableBit |= CAM_QCOM_FEATURE_CHROMA_FLASH;
    }
    if (isUbiFocusEnabled()) {
        advancedFeatEnableBit |= CAM_QCOM_FEATURE_UBIFOCUS;
    }
    if (isTruePortraitEnabled()) {
        advancedFeatEnableBit |= CAM_QCOM_FEATURE_TRUEPORTRAIT;
    }
    if (isOptiZoomEnabled()) {
        advancedFeatEnableBit |= CAM_QCOM_FEATURE_OPTIZOOM;
    }
    if (isUbiRefocus()) {
        advancedFeatEnableBit |= CAM_QCOM_FEATURE_REFOCUS;
    }

   if (m_bLongshotEnabled && advancedFeatEnableBit) {
        LOGE("Failed Longshot mode bit 0x%x",
                    advancedFeatEnableBit);
        rc = BAD_TYPE;
        return rc;
    }

    if(m_bRecordingHint_new) {
        advancedFeatEnableBit &= ~CAM_QCOM_FEATURE_STILLMORE;

        if (advancedFeatEnableBit) {
            LOGE("Failed recording mode bit 0x%x",
                    advancedFeatEnableBit);
            rc = BAD_TYPE;
        }
    } else if (m_bZslMode_new) {
        /* ZSL mode check if 2 bits are set */
        if (advancedFeatEnableBit & (advancedFeatEnableBit - 1)) {
            LOGE("Failed ZSL mode bit 0x%x", advancedFeatEnableBit);
            rc = BAD_TYPE;
        }
    } else { /* non-ZSL mode */
        advancedFeatEnableBit &= ~CAM_QCOM_FEATURE_HDR;

        /* non-ZSL mode check if 1 bit is set */
        if (advancedFeatEnableBit) {
            LOGE("Failed non-ZSL mode bit 0x%x", advancedFeatEnableBit);
            rc = BAD_TYPE;
        }
    }
    LOGI("Advance feature enabled 0x%x", advancedFeatEnableBit);
    return rc;
}

/*===========================================================================
 * FUNCTION   : updateParameters
 *
 * DESCRIPTION: update parameters from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *   @needRestart : [output] if preview need restart upon setting changes
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateParameters(const String8& p,
        bool &needRestart)
{
    int32_t final_rc = NO_ERROR;
    int32_t rc;
    m_bNeedRestart = false;
    QCameraParameters params(p);

    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        rc = BAD_TYPE;
        goto UPDATE_PARAM_DONE;
    }

    if ((rc = setPreviewSize(params)))                  final_rc = rc;
    if ((rc = setVideoSize(params)))                    final_rc = rc;
    if ((rc = setPictureSize(params)))                  final_rc = rc;
    if ((rc = setPreviewFormat(params)))                final_rc = rc;
    if ((rc = setPictureFormat(params)))                final_rc = rc;
    if ((rc = setJpegQuality(params)))                  final_rc = rc;
    if ((rc = setOrientation(params)))                  final_rc = rc;
    if ((rc = setRotation(params)))                     final_rc = rc;
    if ((rc = setVideoRotation(params)))                final_rc = rc;
    if ((rc = setNoDisplayMode(params)))                final_rc = rc;
    if ((rc = setZslMode(params)))                      final_rc = rc;
    if ((rc = setZslAttributes(params)))                final_rc = rc;
    if ((rc = setCameraMode(params)))                   final_rc = rc;
    if ((rc = setSceneSelectionMode(params)))           final_rc = rc;
    if ((rc = setRecordingHint(params)))                final_rc = rc;
    if ((rc = setRdiMode(params)))                      final_rc = rc;
    if ((rc = setSecureMode(params)))                   final_rc = rc;
    if ((rc = setPreviewFrameRate(params)))             final_rc = rc;
    if ((rc = setPreviewFpsRange(params)))              final_rc = rc;
    if ((rc = setAutoExposure(params)))                 final_rc = rc;
    if ((rc = setEffect(params)))                       final_rc = rc;
    if ((rc = setBrightness(params)))                   final_rc = rc;
    if ((rc = setZoom(params)))                         final_rc = rc;
    if ((rc = setSharpness(params)))                    final_rc = rc;
    if ((rc = setSaturation(params)))                   final_rc = rc;
    if ((rc = setContrast(params)))                     final_rc = rc;
    if ((rc = setFocusMode(params)))                    final_rc = rc;
    if ((rc = setISOValue(params)))                     final_rc = rc;
    if ((rc = setContinuousISO(params)))                final_rc = rc;
    if ((rc = setExposureTime(params)))                 final_rc = rc;
    if ((rc = setSkinToneEnhancement(params)))          final_rc = rc;
    if ((rc = setFlash(params)))                        final_rc = rc;
    if ((rc = setAecLock(params)))                      final_rc = rc;
    if ((rc = setAwbLock(params)))                      final_rc = rc;
    if ((rc = setLensShadeValue(params)))               final_rc = rc;
    if ((rc = setMCEValue(params)))                     final_rc = rc;
    if ((rc = setDISValue(params)))                     final_rc = rc;
    if ((rc = setAntibanding(params)))                  final_rc = rc;
    if ((rc = setExposureCompensation(params)))         final_rc = rc;
    if ((rc = setWhiteBalance(params)))                 final_rc = rc;
    if ((rc = setHDRMode(params)))                      final_rc = rc;
    if ((rc = setHDRNeed1x(params)))                    final_rc = rc;
    if ((rc = setManualWhiteBalance(params)))           final_rc = rc;
    if ((rc = setSceneMode(params)))                    final_rc = rc;
    if ((rc = setFocusAreas(params)))                   final_rc = rc;
    if ((rc = setFocusPosition(params)))                final_rc = rc;
    if ((rc = setMeteringAreas(params)))                final_rc = rc;
    if ((rc = setSelectableZoneAf(params)))             final_rc = rc;
    if ((rc = setRedeyeReduction(params)))              final_rc = rc;
    if ((rc = setAEBracket(params)))                    final_rc = rc;
    if ((rc = setAutoHDR(params)))                      final_rc = rc;
    if ((rc = setGpsLocation(params)))                  final_rc = rc;
    if ((rc = setWaveletDenoise(params)))               final_rc = rc;
    if ((rc = setFaceRecognition(params)))              final_rc = rc;
    if ((rc = setFlip(params)))                         final_rc = rc;
    if ((rc = setVideoHDR(params)))                     final_rc = rc;
    if ((rc = setVtEnable(params)))                     final_rc = rc;
    if ((rc = setAFBracket(params)))                    final_rc = rc;
    if ((rc = setReFocus(params)))                      final_rc = rc;
    if ((rc = setChromaFlash(params)))                  final_rc = rc;
    if ((rc = setTruePortrait(params)))                 final_rc = rc;
    if ((rc = setOptiZoom(params)))                     final_rc = rc;
    if ((rc = setBurstLEDOnPeriod(params)))             final_rc = rc;
    if ((rc = setRetroActiveBurstNum(params)))          final_rc = rc;
    if ((rc = setSnapshotFDReq(params)))                final_rc = rc;
    if ((rc = setTintlessValue(params)))                final_rc = rc;
    if ((rc = setCDSMode(params)))                      final_rc = rc;
    if ((rc = setTemporalDenoise(params)))              final_rc = rc;
    if ((rc = setCacheVideoBuffers(params)))            final_rc = rc;
    if ((rc = setInitialExposureIndex(params)))         final_rc = rc;
    if ((rc = setInstantCapture(params)))               final_rc = rc;
    if ((rc = setInstantAEC(params)))                   final_rc = rc;

    // update live snapshot size after all other parameters are set
    if ((rc = setLiveSnapshotSize(params)))             final_rc = rc;
    if ((rc = setJpegThumbnailSize(params)))            final_rc = rc;
    if ((rc = setStatsDebugMask()))                     final_rc = rc;
    if ((rc = setPAAF()))                               final_rc = rc;
    if ((rc = setMobicat(params)))                      final_rc = rc;
    if ((rc = setSeeMore(params)))                      final_rc = rc;
    if ((rc = setStillMore(params)))                    final_rc = rc;
    if ((rc = setCustomParams(params)))                 final_rc = rc;
    if ((rc = setNoiseReductionMode(params)))           final_rc = rc;

    if ((rc = setLongshotParam(params)))                final_rc = rc;
    if ((rc = setDualLedCalibration(params)))           final_rc = rc;

    setVideoBatchSize();
    setLowLightCapture();

    if ((rc = updateFlash(false)))                      final_rc = rc;

#ifdef TARGET_TS_MAKEUP
    if (params.get(KEY_TS_MAKEUP) != NULL) {
        set(KEY_TS_MAKEUP,params.get(KEY_TS_MAKEUP));
        final_rc = rc;
    }
    if (params.get(KEY_TS_MAKEUP_WHITEN) != NULL) {
        set(KEY_TS_MAKEUP_WHITEN,params.get(KEY_TS_MAKEUP_WHITEN));
        final_rc = rc;
    }
    if (params.get(KEY_TS_MAKEUP_CLEAN) != NULL) {
        set(KEY_TS_MAKEUP_CLEAN,params.get(KEY_TS_MAKEUP_CLEAN));
        final_rc = rc;
    }
#endif

    if ((rc = setAdvancedCaptureMode()))                final_rc = rc;
UPDATE_PARAM_DONE:
    needRestart = m_bNeedRestart;
    return final_rc;
}

/*===========================================================================
 * FUNCTION   : commitParameters
 *
 * DESCRIPTION: commit parameter changes to backend
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::commitParameters()
{
    return commitSetBatch();
}

/*===========================================================================
 * FUNCTION   : initDefaultParameters
 *
 * DESCRIPTION: initialize default parameters for the first time
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::initDefaultParameters()
{
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }
    int32_t hal_version = CAM_HAL_V1;
    ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_HAL_VERSION, hal_version);

    /*************************Initialize Values******************************/
    // Set read only parameters from camera capability
    set(KEY_SMOOTH_ZOOM_SUPPORTED,
        m_pCapability->smooth_zoom_supported? VALUE_TRUE : VALUE_FALSE);
    set(KEY_ZOOM_SUPPORTED,
        m_pCapability->zoom_supported? VALUE_TRUE : VALUE_FALSE);
    set(KEY_VIDEO_SNAPSHOT_SUPPORTED,
        m_pCapability->video_snapshot_supported? VALUE_TRUE : VALUE_FALSE);
    set(KEY_VIDEO_STABILIZATION_SUPPORTED,
        m_pCapability->video_stablization_supported? VALUE_TRUE : VALUE_FALSE);
    set(KEY_AUTO_EXPOSURE_LOCK_SUPPORTED,
        m_pCapability->auto_exposure_lock_supported? VALUE_TRUE : VALUE_FALSE);
    set(KEY_AUTO_WHITEBALANCE_LOCK_SUPPORTED,
        m_pCapability->auto_wb_lock_supported? VALUE_TRUE : VALUE_FALSE);
    set(KEY_MAX_NUM_DETECTED_FACES_HW, m_pCapability->max_num_roi);
    set(KEY_MAX_NUM_DETECTED_FACES_SW, m_pCapability->max_num_roi);
    set(KEY_QC_MAX_NUM_REQUESTED_FACES, m_pCapability->max_num_roi);
    // Set focal length, horizontal view angle, and vertical view angle
    setFloat(KEY_FOCAL_LENGTH, m_pCapability->focal_length);
    setFloat(KEY_HORIZONTAL_VIEW_ANGLE, m_pCapability->hor_view_angle);
    setFloat(KEY_VERTICAL_VIEW_ANGLE, m_pCapability->ver_view_angle);
    set(QCameraParameters::KEY_FOCUS_DISTANCES, "Infinity,Infinity,Infinity");
    set(KEY_QC_AUTO_HDR_SUPPORTED,
        (m_pCapability->auto_hdr_supported)? VALUE_TRUE : VALUE_FALSE);
    // Set supported preview sizes
    if (m_pCapability->preview_sizes_tbl_cnt > 0 &&
        m_pCapability->preview_sizes_tbl_cnt <= MAX_SIZES_CNT) {
        String8 previewSizeValues = createSizesString(
                m_pCapability->preview_sizes_tbl, m_pCapability->preview_sizes_tbl_cnt);
        set(KEY_SUPPORTED_PREVIEW_SIZES, previewSizeValues.string());
        LOGH("supported preview sizes: %s", previewSizeValues.string());
        // Set default preview size
        CameraParameters::setPreviewSize(m_pCapability->preview_sizes_tbl[0].width,
                                         m_pCapability->preview_sizes_tbl[0].height);
    } else {
        LOGW("supported preview sizes cnt is 0 or exceeds max!!!");
    }

    // Set supported video sizes
    if (m_pCapability->video_sizes_tbl_cnt > 0 &&
        m_pCapability->video_sizes_tbl_cnt <= MAX_SIZES_CNT) {
        String8 videoSizeValues = createSizesString(
                m_pCapability->video_sizes_tbl, m_pCapability->video_sizes_tbl_cnt);
        set(KEY_SUPPORTED_VIDEO_SIZES, videoSizeValues.string());
        LOGH("supported video sizes: %s", videoSizeValues.string());
        // Set default video size
        CameraParameters::setVideoSize(m_pCapability->video_sizes_tbl[0].width,
                                       m_pCapability->video_sizes_tbl[0].height);

        //Set preferred Preview size for video
        String8 vSize = createSizesString(&m_pCapability->preview_sizes_tbl[0], 1);
        set(KEY_PREFERRED_PREVIEW_SIZE_FOR_VIDEO, vSize.string());
    } else {
        LOGW("supported video sizes cnt is 0 or exceeds max!!!");
    }

    // Set supported picture sizes
    if (m_pCapability->picture_sizes_tbl_cnt > 0 &&
        m_pCapability->picture_sizes_tbl_cnt <= MAX_SIZES_CNT) {
        String8 pictureSizeValues = createSizesString(
                m_pCapability->picture_sizes_tbl, m_pCapability->picture_sizes_tbl_cnt);
        set(KEY_SUPPORTED_PICTURE_SIZES, pictureSizeValues.string());
        LOGH("supported pic sizes: %s", pictureSizeValues.string());
        // Set default picture size to the smallest resolution
        CameraParameters::setPictureSize(
           m_pCapability->picture_sizes_tbl[m_pCapability->picture_sizes_tbl_cnt-1].width,
           m_pCapability->picture_sizes_tbl[m_pCapability->picture_sizes_tbl_cnt-1].height);
    } else {
        LOGW("supported picture sizes cnt is 0 or exceeds max!!!");
    }

    // Need check if scale should be enabled
    if (m_pCapability->scale_picture_sizes_cnt > 0 &&
        m_pCapability->scale_picture_sizes_cnt <= MAX_SCALE_SIZES_CNT){
        //get scale size, enable scaling. And re-set picture size table with scale sizes
        m_reprocScaleParam.setScaleEnable(true);
        int rc_s = m_reprocScaleParam.setScaleSizeTbl(
            m_pCapability->scale_picture_sizes_cnt, m_pCapability->scale_picture_sizes,
            m_pCapability->picture_sizes_tbl_cnt, m_pCapability->picture_sizes_tbl);
        if(rc_s == NO_ERROR){
            cam_dimension_t *totalSizeTbl = m_reprocScaleParam.getTotalSizeTbl();
            size_t totalSizeCnt = m_reprocScaleParam.getTotalSizeTblCnt();
            String8 pictureSizeValues = createSizesString(totalSizeTbl, totalSizeCnt);
            set(KEY_SUPPORTED_PICTURE_SIZES, pictureSizeValues.string());
            LOGH("scaled supported pic sizes: %s", pictureSizeValues.string());
        }else{
            m_reprocScaleParam.setScaleEnable(false);
            LOGW("reset scaled picture size table failed.");
        }
    }else{
        m_reprocScaleParam.setScaleEnable(false);
    }

    // Set supported thumbnail sizes
    String8 thumbnailSizeValues = createSizesString(
            THUMBNAIL_SIZES_MAP,
            PARAM_MAP_SIZE(THUMBNAIL_SIZES_MAP));
    set(KEY_SUPPORTED_JPEG_THUMBNAIL_SIZES, thumbnailSizeValues.string());
    // Set default thumnail size
    set(KEY_JPEG_THUMBNAIL_WIDTH, THUMBNAIL_SIZES_MAP[0].width);
    set(KEY_JPEG_THUMBNAIL_HEIGHT, THUMBNAIL_SIZES_MAP[0].height);

    // Set supported livesnapshot sizes
    if (m_pCapability->livesnapshot_sizes_tbl_cnt > 0 &&
        m_pCapability->livesnapshot_sizes_tbl_cnt <= MAX_SIZES_CNT) {
        String8 liveSnpashotSizeValues = createSizesString(
                m_pCapability->livesnapshot_sizes_tbl,
                m_pCapability->livesnapshot_sizes_tbl_cnt);
        set(KEY_QC_SUPPORTED_LIVESNAPSHOT_SIZES, liveSnpashotSizeValues.string());
        LOGD("supported live snapshot sizes: %s", liveSnpashotSizeValues.string());
        m_LiveSnapshotSize =
            m_pCapability->livesnapshot_sizes_tbl[m_pCapability->livesnapshot_sizes_tbl_cnt-1];
    }

    // Set supported preview formats
    String8 previewFormatValues = createValuesString(
            m_pCapability->supported_preview_fmts,
            m_pCapability->supported_preview_fmt_cnt,
            PREVIEW_FORMATS_MAP,
            PARAM_MAP_SIZE(PREVIEW_FORMATS_MAP));
    set(KEY_SUPPORTED_PREVIEW_FORMATS, previewFormatValues.string());
    // Set default preview format
    CameraParameters::setPreviewFormat(PIXEL_FORMAT_YUV420SP);

    // Set default Video Format as OPAQUE
    // Internally both Video and Camera subsystems use NV21_VENUS
    set(KEY_VIDEO_FRAME_FORMAT, PIXEL_FORMAT_ANDROID_OPAQUE);

    // Set supported picture formats
    String8 pictureTypeValues(PIXEL_FORMAT_JPEG);
    String8 str = createValuesString(
            m_pCapability->supported_raw_fmts,
            m_pCapability->supported_raw_fmt_cnt,
            PICTURE_TYPES_MAP,
            PARAM_MAP_SIZE(PICTURE_TYPES_MAP));
    if (str.string() != NULL) {
        pictureTypeValues.append(",");
        pictureTypeValues.append(str);
    }

    set(KEY_SUPPORTED_PICTURE_FORMATS, pictureTypeValues.string());
    // Set default picture Format
    CameraParameters::setPictureFormat(PIXEL_FORMAT_JPEG);
    // Set raw image size
    char raw_size_str[32];
    snprintf(raw_size_str, sizeof(raw_size_str), "%dx%d",
             m_pCapability->raw_dim[0].width, m_pCapability->raw_dim[0].height);
    set(KEY_QC_RAW_PICUTRE_SIZE, raw_size_str);
    LOGD("KEY_QC_RAW_PICUTRE_SIZE: w: %d, h: %d ",
       m_pCapability->raw_dim[0].width, m_pCapability->raw_dim[0].height);

    //set default jpeg quality and thumbnail quality
    set(KEY_JPEG_QUALITY, 85);
    set(KEY_JPEG_THUMBNAIL_QUALITY, 85);

    // Set FPS ranges
    if (m_pCapability->fps_ranges_tbl_cnt > 0 &&
        m_pCapability->fps_ranges_tbl_cnt <= MAX_SIZES_CNT) {
        int default_fps_index = 0;
        String8 fpsRangeValues = createFpsRangeString(m_pCapability->fps_ranges_tbl,
                                                      m_pCapability->fps_ranges_tbl_cnt,
                                                      default_fps_index);
        set(KEY_SUPPORTED_PREVIEW_FPS_RANGE, fpsRangeValues.string());

        int min_fps =
            int(m_pCapability->fps_ranges_tbl[default_fps_index].min_fps * 1000);
        int max_fps =
            int(m_pCapability->fps_ranges_tbl[default_fps_index].max_fps * 1000);
        m_default_fps_range = m_pCapability->fps_ranges_tbl[default_fps_index];
        //Set video fps same as preview fps
        setPreviewFpsRange(min_fps, max_fps, min_fps, max_fps);

        // Set legacy preview fps
        String8 fpsValues = createFpsString(m_pCapability->fps_ranges_tbl[default_fps_index]);
        set(KEY_SUPPORTED_PREVIEW_FRAME_RATES, fpsValues.string());
        LOGH("supported fps rates: %s", fpsValues.string());
        CameraParameters::setPreviewFrameRate(int(m_pCapability->fps_ranges_tbl[default_fps_index].max_fps));
    } else {
        LOGW("supported fps ranges cnt is 0 or exceeds max!!!");
    }

    // Set supported focus modes
    if (m_pCapability->supported_focus_modes_cnt > 0) {
        String8 focusModeValues = createValuesString(
                m_pCapability->supported_focus_modes,
                m_pCapability->supported_focus_modes_cnt,
                FOCUS_MODES_MAP,
                PARAM_MAP_SIZE(FOCUS_MODES_MAP));
        set(KEY_SUPPORTED_FOCUS_MODES, focusModeValues);

        // Set default focus mode and update corresponding parameter buf
        const char *focusMode = lookupNameByValue(FOCUS_MODES_MAP,
                PARAM_MAP_SIZE(FOCUS_MODES_MAP),
                m_pCapability->supported_focus_modes[0]);
        if (focusMode != NULL) {
            setFocusMode(focusMode);
        } else {
            setFocusMode(FOCUS_MODE_FIXED);
        }
    } else {
        LOGW("supported focus modes cnt is 0!!!");
    }

    // Set focus areas
    if (m_pCapability->max_num_focus_areas > MAX_ROI) {
        m_pCapability->max_num_focus_areas = MAX_ROI;
    }
    set(KEY_MAX_NUM_FOCUS_AREAS, m_pCapability->max_num_focus_areas);
    if (m_pCapability->max_num_focus_areas > 0) {
        setFocusAreas(DEFAULT_CAMERA_AREA);
    }

    // Set metering areas
    if (m_pCapability->max_num_metering_areas > MAX_ROI) {
        m_pCapability->max_num_metering_areas = MAX_ROI;
    }
    set(KEY_MAX_NUM_METERING_AREAS, m_pCapability->max_num_metering_areas);
    if (m_pCapability->max_num_metering_areas > 0) {
        setMeteringAreas(DEFAULT_CAMERA_AREA);
    }

    // set focus position, we should get them from m_pCapability
    m_pCapability->min_focus_pos[CAM_MANUAL_FOCUS_MODE_INDEX] = 0;
    m_pCapability->max_focus_pos[CAM_MANUAL_FOCUS_MODE_INDEX] = 1023;
    set(KEY_QC_MIN_FOCUS_POS_INDEX,
            (int) m_pCapability->min_focus_pos[CAM_MANUAL_FOCUS_MODE_INDEX]);
    set(KEY_QC_MAX_FOCUS_POS_INDEX,
            (int) m_pCapability->max_focus_pos[CAM_MANUAL_FOCUS_MODE_INDEX]);

    m_pCapability->min_focus_pos[CAM_MANUAL_FOCUS_MODE_DAC_CODE] = 0;
    m_pCapability->max_focus_pos[CAM_MANUAL_FOCUS_MODE_DAC_CODE] = 1023;
    set(KEY_QC_MIN_FOCUS_POS_DAC,
            (int) m_pCapability->min_focus_pos[CAM_MANUAL_FOCUS_MODE_DAC_CODE]);
    set(KEY_QC_MAX_FOCUS_POS_DAC,
            (int) m_pCapability->max_focus_pos[CAM_MANUAL_FOCUS_MODE_DAC_CODE]);

    m_pCapability->min_focus_pos[CAM_MANUAL_FOCUS_MODE_RATIO] = 0;
    m_pCapability->max_focus_pos[CAM_MANUAL_FOCUS_MODE_RATIO] = 100;
    set(KEY_QC_MIN_FOCUS_POS_RATIO,
            (int) m_pCapability->min_focus_pos[CAM_MANUAL_FOCUS_MODE_RATIO]);
    set(KEY_QC_MAX_FOCUS_POS_RATIO,
            (int) m_pCapability->max_focus_pos[CAM_MANUAL_FOCUS_MODE_RATIO]);

    m_pCapability->min_focus_pos[CAM_MANUAL_FOCUS_MODE_DIOPTER] = 0;
    if (m_pCapability->min_focus_distance > 0) {
        m_pCapability->max_focus_pos[CAM_MANUAL_FOCUS_MODE_DIOPTER] =
                m_pCapability->min_focus_distance;
    } else {
        m_pCapability->max_focus_pos[CAM_MANUAL_FOCUS_MODE_DIOPTER] = 0;
    }
    setFloat(KEY_QC_MIN_FOCUS_POS_DIOPTER,
            m_pCapability->min_focus_pos[CAM_MANUAL_FOCUS_MODE_DIOPTER]);
    setFloat(KEY_QC_MAX_FOCUS_POS_DIOPTER,
            m_pCapability->max_focus_pos[CAM_MANUAL_FOCUS_MODE_DIOPTER]);

    //set supported manual focus modes
    String8 manualFocusModes(VALUE_OFF);
    if (m_pCapability->supported_focus_modes_cnt > 1 &&
        m_pCapability->min_focus_distance > 0) {
        manualFocusModes.append(",");
        manualFocusModes.append(KEY_QC_FOCUS_SCALE_MODE);
        manualFocusModes.append(",");
        manualFocusModes.append(KEY_QC_FOCUS_DIOPTER_MODE);
    }
    set(KEY_QC_SUPPORTED_MANUAL_FOCUS_MODES, manualFocusModes.string());

    // Set Saturation
    set(KEY_QC_MIN_SATURATION, m_pCapability->saturation_ctrl.min_value);
    set(KEY_QC_MAX_SATURATION, m_pCapability->saturation_ctrl.max_value);
    set(KEY_QC_SATURATION_STEP, m_pCapability->saturation_ctrl.step);
    setSaturation(m_pCapability->saturation_ctrl.def_value);

    // Set Sharpness
    set(KEY_QC_MIN_SHARPNESS, m_pCapability->sharpness_ctrl.min_value);
    set(KEY_QC_MAX_SHARPNESS, m_pCapability->sharpness_ctrl.max_value);
    set(KEY_QC_SHARPNESS_STEP, m_pCapability->sharpness_ctrl.step);
    setSharpness(m_pCapability->sharpness_ctrl.def_value);

    // Set Contrast
    set(KEY_QC_MIN_CONTRAST, m_pCapability->contrast_ctrl.min_value);
    set(KEY_QC_MAX_CONTRAST, m_pCapability->contrast_ctrl.max_value);
    set(KEY_QC_CONTRAST_STEP, m_pCapability->contrast_ctrl.step);
    setContrast(m_pCapability->contrast_ctrl.def_value);

    // Set SCE factor
    set(KEY_QC_MIN_SCE_FACTOR, m_pCapability->sce_ctrl.min_value); // -100
    set(KEY_QC_MAX_SCE_FACTOR, m_pCapability->sce_ctrl.max_value); // 100
    set(KEY_QC_SCE_FACTOR_STEP, m_pCapability->sce_ctrl.step);     // 10
    setSkinToneEnhancement(m_pCapability->sce_ctrl.def_value);     // 0

    // Set Brightness
    set(KEY_QC_MIN_BRIGHTNESS, m_pCapability->brightness_ctrl.min_value); // 0
    set(KEY_QC_MAX_BRIGHTNESS, m_pCapability->brightness_ctrl.max_value); // 6
    set(KEY_QC_BRIGHTNESS_STEP, m_pCapability->brightness_ctrl.step);     // 1
    setBrightness(m_pCapability->brightness_ctrl.def_value);

    // Set Auto exposure
    String8 autoExposureValues = createValuesString(
            m_pCapability->supported_aec_modes,
            m_pCapability->supported_aec_modes_cnt,
            AUTO_EXPOSURE_MAP,
            PARAM_MAP_SIZE(AUTO_EXPOSURE_MAP));
    set(KEY_QC_SUPPORTED_AUTO_EXPOSURE, autoExposureValues.string());
    setAutoExposure(AUTO_EXPOSURE_FRAME_AVG);

    // Set Exposure Compensation
    set(KEY_MAX_EXPOSURE_COMPENSATION, m_pCapability->exposure_compensation_max); // 12
    set(KEY_MIN_EXPOSURE_COMPENSATION, m_pCapability->exposure_compensation_min); // -12
    setFloat(KEY_EXPOSURE_COMPENSATION_STEP, m_pCapability->exposure_compensation_step); // 1/6
    setExposureCompensation(m_pCapability->exposure_compensation_default); // 0

    // Set Instant AEC modes
    String8 instantAECModes = createValuesString(
            m_pCapability->supported_instant_aec_modes,
            m_pCapability->supported_instant_aec_modes_cnt,
            INSTANT_AEC_MODES_MAP,
            PARAM_MAP_SIZE(INSTANT_AEC_MODES_MAP));
    set(KEY_QC_INSTANT_AEC_SUPPORTED_MODES, instantAECModes.string());

    // Set Instant Capture modes
    String8 instantCaptureModes = createValuesString(
            m_pCapability->supported_instant_aec_modes,
            m_pCapability->supported_instant_aec_modes_cnt,
            INSTANT_CAPTURE_MODES_MAP,
            PARAM_MAP_SIZE(INSTANT_CAPTURE_MODES_MAP));
    set(KEY_QC_INSTANT_CAPTURE_SUPPORTED_MODES, instantCaptureModes.string());


    // Set Antibanding
    String8 antibandingValues = createValuesString(
            m_pCapability->supported_antibandings,
            m_pCapability->supported_antibandings_cnt,
            ANTIBANDING_MODES_MAP,
            PARAM_MAP_SIZE(ANTIBANDING_MODES_MAP));
    set(KEY_SUPPORTED_ANTIBANDING, antibandingValues);
    setAntibanding(ANTIBANDING_OFF);

    // Set Effect
    String8 effectValues = createValuesString(
            m_pCapability->supported_effects,
            m_pCapability->supported_effects_cnt,
            EFFECT_MODES_MAP,
            PARAM_MAP_SIZE(EFFECT_MODES_MAP));

    if (m_pCapability->supported_effects_cnt > 0) {
        set(KEY_SUPPORTED_EFFECTS, effectValues);
    } else {
        LOGW("Color effects are not available");
        set(KEY_SUPPORTED_EFFECTS, EFFECT_NONE);
    }
    setEffect(EFFECT_NONE);

    // Set WhiteBalance
    String8 whitebalanceValues = createValuesString(
            m_pCapability->supported_white_balances,
            m_pCapability->supported_white_balances_cnt,
            WHITE_BALANCE_MODES_MAP,
            PARAM_MAP_SIZE(WHITE_BALANCE_MODES_MAP));
    set(KEY_SUPPORTED_WHITE_BALANCE, whitebalanceValues);
    setWhiteBalance(WHITE_BALANCE_AUTO);

    // set supported wb cct, we should get them from m_pCapability
    m_pCapability->min_wb_cct = 2000;
    m_pCapability->max_wb_cct = 8000;
    set(KEY_QC_MIN_WB_CCT, m_pCapability->min_wb_cct);
    set(KEY_QC_MAX_WB_CCT, m_pCapability->max_wb_cct);

    // set supported wb rgb gains, ideally we should get them from m_pCapability
    //but for now hardcode.
    m_pCapability->min_wb_gain = 1.0;
    m_pCapability->max_wb_gain = 4.0;
    setFloat(KEY_QC_MIN_WB_GAIN, m_pCapability->min_wb_gain);
    setFloat(KEY_QC_MAX_WB_GAIN, m_pCapability->max_wb_gain);

    //set supported manual wb modes
    String8 manualWBModes(VALUE_OFF);
    if(m_pCapability->sensor_type.sens_type != CAM_SENSOR_YUV) {
        manualWBModes.append(",");
        manualWBModes.append(KEY_QC_WB_CCT_MODE);
        manualWBModes.append(",");
        manualWBModes.append(KEY_QC_WB_GAIN_MODE);
    }
    set(KEY_QC_SUPPORTED_MANUAL_WB_MODES, manualWBModes.string());

    // Set Flash mode
    if(m_pCapability->supported_flash_modes_cnt > 0) {
       String8 flashValues = createValuesString(
               m_pCapability->supported_flash_modes,
               m_pCapability->supported_flash_modes_cnt,
               FLASH_MODES_MAP,
               PARAM_MAP_SIZE(FLASH_MODES_MAP));
       set(KEY_SUPPORTED_FLASH_MODES, flashValues);
       setFlash(FLASH_MODE_OFF);
    } else {
        LOGW("supported flash modes cnt is 0!!!");
    }

    // Set Scene Mode
    String8 sceneModeValues = createValuesString(
            m_pCapability->supported_scene_modes,
            m_pCapability->supported_scene_modes_cnt,
            SCENE_MODES_MAP,
            PARAM_MAP_SIZE(SCENE_MODES_MAP));
    set(KEY_SUPPORTED_SCENE_MODES, sceneModeValues);
    setSceneMode(SCENE_MODE_AUTO);

    // Set CDS Mode
    String8 cdsModeValues = createValuesStringFromMap(
            CDS_MODES_MAP,
            PARAM_MAP_SIZE(CDS_MODES_MAP));
    set(KEY_QC_SUPPORTED_CDS_MODES, cdsModeValues);

    // Set video CDS Mode
    String8 videoCdsModeValues = createValuesStringFromMap(
            CDS_MODES_MAP,
            PARAM_MAP_SIZE(CDS_MODES_MAP));
    set(KEY_QC_SUPPORTED_VIDEO_CDS_MODES, videoCdsModeValues);

    // Set TNR Mode
    String8 tnrModeValues = createValuesStringFromMap(
            ON_OFF_MODES_MAP,
            PARAM_MAP_SIZE(ON_OFF_MODES_MAP));
    set(KEY_QC_SUPPORTED_TNR_MODES, tnrModeValues);

    // Set video TNR Mode
    String8 videoTnrModeValues = createValuesStringFromMap(
            ON_OFF_MODES_MAP,
            PARAM_MAP_SIZE(ON_OFF_MODES_MAP));
    set(KEY_QC_SUPPORTED_VIDEO_TNR_MODES, videoTnrModeValues);

    // Set ISO Mode
    String8 isoValues = createValuesString(
            m_pCapability->supported_iso_modes,
            m_pCapability->supported_iso_modes_cnt,
            ISO_MODES_MAP,
            PARAM_MAP_SIZE(ISO_MODES_MAP));
    set(KEY_QC_SUPPORTED_ISO_MODES, isoValues);
    setISOValue(ISO_AUTO);

    // Set exposure time
    String8 manualExpModes(VALUE_OFF);
    bool expTimeSupported = false;
    bool manualISOSupported = false;
    //capability values are in nano sec, convert to milli sec for upper layers
    char expTimeStr[20];
    double min_exp_time = (double) m_pCapability->exposure_time_range[0] / 1000000.0;
    double max_exp_time = (double) m_pCapability->exposure_time_range[1] / 1000000.0;
    snprintf(expTimeStr, sizeof(expTimeStr), "%f", min_exp_time);
    set(KEY_QC_MIN_EXPOSURE_TIME, expTimeStr);
    snprintf(expTimeStr, sizeof(expTimeStr), "%f", max_exp_time);
    set(KEY_QC_MAX_EXPOSURE_TIME, expTimeStr);
    if ((min_exp_time > 0) && (max_exp_time > min_exp_time)) {
        manualExpModes.append(",");
        manualExpModes.append(KEY_QC_EXP_TIME_PRIORITY);
        expTimeSupported = true;
    }
    LOGH(", Exposure time min %f ms, max %f ms",
            min_exp_time, max_exp_time);

    // Set iso
    set(KEY_QC_MIN_ISO, m_pCapability->sensitivity_range.min_sensitivity);
    set(KEY_QC_MAX_ISO, m_pCapability->sensitivity_range.max_sensitivity);
    LOGH(", ISO min %d, max %d",
            m_pCapability->sensitivity_range.min_sensitivity,
            m_pCapability->sensitivity_range.max_sensitivity);
    if ((m_pCapability->sensitivity_range.min_sensitivity > 0) &&
            (m_pCapability->sensitivity_range.max_sensitivity >
                    m_pCapability->sensitivity_range.min_sensitivity)) {
        manualExpModes.append(",");
        manualExpModes.append(KEY_QC_ISO_PRIORITY);
        manualISOSupported = true;
    }
    if (expTimeSupported && manualISOSupported) {
        manualExpModes.append(",");
        manualExpModes.append(KEY_QC_USER_SETTING);
    }
    //finally set supported manual exposure modes
    set(KEY_QC_SUPPORTED_MANUAL_EXPOSURE_MODES, manualExpModes.string());

    // Set HFR
    String8 hfrValues = createHfrValuesString(
            m_pCapability->hfr_tbl,
            m_pCapability->hfr_tbl_cnt,
            HFR_MODES_MAP,
            PARAM_MAP_SIZE(HFR_MODES_MAP));
    set(KEY_QC_SUPPORTED_VIDEO_HIGH_FRAME_RATE_MODES, hfrValues.string());
    set(KEY_QC_VIDEO_HIGH_SPEED_RECORDING, "off");
    set(KEY_QC_VIDEO_HIGH_FRAME_RATE, "off");
    String8 hfrSizeValues = createHfrSizesString(
            m_pCapability->hfr_tbl,
            m_pCapability->hfr_tbl_cnt);
    set(KEY_QC_SUPPORTED_HFR_SIZES, hfrSizeValues.string());
    LOGD("HFR values = %s HFR Sizes = %s", hfrValues.string(), hfrSizeValues.string());
    setHighFrameRate(CAM_HFR_MODE_OFF);

    // Set Focus algorithms
    String8 focusAlgoValues = createValuesString(
            m_pCapability->supported_focus_algos,
            m_pCapability->supported_focus_algos_cnt,
            FOCUS_ALGO_MAP,
            PARAM_MAP_SIZE(FOCUS_ALGO_MAP));
    set(KEY_QC_SUPPORTED_FOCUS_ALGOS, focusAlgoValues);
    setSelectableZoneAf(FOCUS_ALGO_AUTO);

    // Set Zoom Ratios
    if (m_pCapability->zoom_supported > 0) {
        String8 zoomRatioValues = createZoomRatioValuesString(
                m_pCapability->zoom_ratio_tbl,
                m_pCapability->zoom_ratio_tbl_cnt);
        set(KEY_ZOOM_RATIOS, zoomRatioValues);
        set(KEY_MAX_ZOOM, (int)(m_pCapability->zoom_ratio_tbl_cnt - 1));
        setZoom(0);
    }

    // Set Bracketing/HDR
    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));
    property_get("persist.capture.burst.exposures", prop, "");
    if (strlen(prop) > 0) {
        set(KEY_QC_CAPTURE_BURST_EXPOSURE, prop);
    }
    String8 bracketingValues = createValuesStringFromMap(
            BRACKETING_MODES_MAP,
            PARAM_MAP_SIZE(BRACKETING_MODES_MAP));
    set(KEY_QC_SUPPORTED_AE_BRACKET_MODES, bracketingValues);
    setAEBracket(AE_BRACKET_OFF);

    //Set AF Bracketing.
    for (size_t i = 0; i < m_pCapability->supported_focus_modes_cnt; i++) {
        if ((CAM_FOCUS_MODE_AUTO == m_pCapability->supported_focus_modes[i]) &&
                ((m_pCapability->qcom_supported_feature_mask &
                        CAM_QCOM_FEATURE_UBIFOCUS) > 0)) {
            String8 afBracketingValues = createValuesStringFromMap(
                    AF_BRACKETING_MODES_MAP,
                    PARAM_MAP_SIZE(AF_BRACKETING_MODES_MAP));
            set(KEY_QC_SUPPORTED_AF_BRACKET_MODES, afBracketingValues);
            setAFBracket(AF_BRACKET_OFF);
            break;
         }
    }

    //Set Refocus.
    //Re-use ubifocus flag for now.
    for (size_t i = 0; i < m_pCapability->supported_focus_modes_cnt; i++) {
        if ((CAM_FOCUS_MODE_AUTO == m_pCapability->supported_focus_modes[i]) &&
                (m_pCapability->qcom_supported_feature_mask &
                    CAM_QCOM_FEATURE_REFOCUS) > 0) {
            String8 reFocusValues = createValuesStringFromMap(
                    RE_FOCUS_MODES_MAP,
                    PARAM_MAP_SIZE(RE_FOCUS_MODES_MAP));
            set(KEY_QC_SUPPORTED_RE_FOCUS_MODES, reFocusValues);
            setReFocus(RE_FOCUS_OFF);
        }
    }

    //Set Chroma Flash.
    if ((m_pCapability->supported_flash_modes_cnt > 0) &&
            (m_pCapability->qcom_supported_feature_mask &
            CAM_QCOM_FEATURE_CHROMA_FLASH) > 0) {
        String8 chromaFlashValues = createValuesStringFromMap(
                CHROMA_FLASH_MODES_MAP,
                PARAM_MAP_SIZE(CHROMA_FLASH_MODES_MAP));
        set(KEY_QC_SUPPORTED_CHROMA_FLASH_MODES, chromaFlashValues);
        setChromaFlash(CHROMA_FLASH_OFF);
    }

    //Set Opti Zoom.
    if (m_pCapability->zoom_supported &&
            (m_pCapability->qcom_supported_feature_mask &
            CAM_QCOM_FEATURE_OPTIZOOM) > 0){
        String8 optiZoomValues = createValuesStringFromMap(
                OPTI_ZOOM_MODES_MAP,
                PARAM_MAP_SIZE(OPTI_ZOOM_MODES_MAP));
        set(KEY_QC_SUPPORTED_OPTI_ZOOM_MODES, optiZoomValues);
        setOptiZoom(OPTI_ZOOM_OFF);
    }

    //Set HDR Type
    uint32_t supported_hdr_modes = m_pCapability->qcom_supported_feature_mask &
            (CAM_QCOM_FEATURE_SENSOR_HDR | CAM_QCOM_FEATURE_HDR);
    if (supported_hdr_modes) {
        if (CAM_QCOM_FEATURE_SENSOR_HDR == supported_hdr_modes) {
            String8 hdrModeValues;
            hdrModeValues.append(HDR_MODE_SENSOR);
            set(KEY_QC_SUPPORTED_KEY_QC_HDR_MODES, hdrModeValues);
            setHDRMode(HDR_MODE_SENSOR);
        } else if (CAM_QCOM_FEATURE_HDR == supported_hdr_modes) {
            String8 hdrModeValues;
            hdrModeValues.append(HDR_MODE_MULTI_FRAME);
            set(KEY_QC_SUPPORTED_KEY_QC_HDR_MODES, hdrModeValues);
            setHDRMode(HDR_MODE_MULTI_FRAME);
        } else {
            String8 hdrModeValues = createValuesStringFromMap(
                    HDR_MODES_MAP,
                    PARAM_MAP_SIZE(HDR_MODES_MAP));
            set(KEY_QC_SUPPORTED_KEY_QC_HDR_MODES, hdrModeValues);
            setHDRMode(HDR_MODE_MULTI_FRAME);
        }
    }

    //Set HDR need 1x
    String8 hdrNeed1xValues;
    if (!m_bHDRModeSensor) {
        hdrNeed1xValues = createValuesStringFromMap(TRUE_FALSE_MODES_MAP,
                PARAM_MAP_SIZE(TRUE_FALSE_MODES_MAP));
    } else {
        hdrNeed1xValues.append(VALUE_FALSE);
    }
    setHDRNeed1x(VALUE_FALSE);
    set(KEY_QC_SUPPORTED_HDR_NEED_1X, hdrNeed1xValues);

    //Set True Portrait
    if ((m_pCapability->qcom_supported_feature_mask & CAM_QCOM_FEATURE_TRUEPORTRAIT) > 0) {
        String8 truePortraitValues = createValuesStringFromMap(
                TRUE_PORTRAIT_MODES_MAP,
                PARAM_MAP_SIZE(TRUE_PORTRAIT_MODES_MAP));
        set(KEY_QC_SUPPORTED_TRUE_PORTRAIT_MODES, truePortraitValues);
    }

    // Set Denoise
    if ((m_pCapability->qcom_supported_feature_mask & CAM_QCOM_FEATURE_DENOISE2D) > 0){
    String8 denoiseValues = createValuesStringFromMap(
        DENOISE_ON_OFF_MODES_MAP, PARAM_MAP_SIZE(DENOISE_ON_OFF_MODES_MAP));
    set(KEY_QC_SUPPORTED_DENOISE, denoiseValues.string());
#ifdef DEFAULT_DENOISE_MODE_ON
    setWaveletDenoise(DENOISE_ON);
#else
    setWaveletDenoise(DENOISE_OFF);
#endif
    }

    // Set feature enable/disable
    String8 enableDisableValues = createValuesStringFromMap(
            ENABLE_DISABLE_MODES_MAP, PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP));

    // Set Lens Shading
    set(KEY_QC_SUPPORTED_LENSSHADE_MODES, enableDisableValues);
    setLensShadeValue(VALUE_ENABLE);
    // Set MCE
    set(KEY_QC_SUPPORTED_MEM_COLOR_ENHANCE_MODES, enableDisableValues);
    setMCEValue(VALUE_ENABLE);

    // Set DIS
    set(KEY_QC_SUPPORTED_DIS_MODES, enableDisableValues);
    setDISValue(VALUE_DISABLE);

    // Set Histogram
    set(KEY_QC_SUPPORTED_HISTOGRAM_MODES,
        m_pCapability->histogram_supported ? enableDisableValues : "");
    set(KEY_QC_HISTOGRAM, VALUE_DISABLE);

    //Set Red Eye Reduction
    set(KEY_QC_SUPPORTED_REDEYE_REDUCTION, enableDisableValues);
    setRedeyeReduction(VALUE_DISABLE);

    //Set SkinTone Enhancement
    set(KEY_QC_SUPPORTED_SKIN_TONE_ENHANCEMENT_MODES, enableDisableValues);

    // Enable LTM by default and disable it in HDR & SeeMore usecases
    setToneMapMode(true, false);

    // Set feature on/off
    String8 onOffValues = createValuesStringFromMap(
            ON_OFF_MODES_MAP, PARAM_MAP_SIZE(ON_OFF_MODES_MAP));

    //Set See more (LLVD)
    if (m_pCapability->qcom_supported_feature_mask &
            CAM_QCOM_FEATURE_LLVD) {
        set(KEY_QC_SUPPORTED_SEE_MORE_MODES, onOffValues);
        setSeeMore(VALUE_OFF);
    }

    //Set Still more
    if (m_pCapability->qcom_supported_feature_mask &
            CAM_QCOM_FEATURE_STILLMORE) {
        String8 stillMoreValues = createValuesStringFromMap(
                STILL_MORE_MODES_MAP,
                PARAM_MAP_SIZE(STILL_MORE_MODES_MAP));
        set(KEY_QC_SUPPORTED_STILL_MORE_MODES, stillMoreValues);
        setStillMore(STILL_MORE_OFF);
    }

    //Set Noise Reduction mode
    if (m_pCapability->qcom_supported_feature_mask &
            CAM_QTI_FEATURE_SW_TNR) {
        String8 noiseReductionModesValues = createValuesStringFromMap(
                NOISE_REDUCTION_MODES_MAP, PARAM_MAP_SIZE(NOISE_REDUCTION_MODES_MAP));
        set(KEY_QC_NOISE_REDUCTION_MODE_VALUES, noiseReductionModesValues);
        setNoiseReductionMode(VALUE_OFF);
    }

    //Set Scene Detection
    set(KEY_QC_SUPPORTED_SCENE_DETECT, onOffValues);
    setSceneDetect(VALUE_OFF);
    m_bHDREnabled = false;
    m_bHDR1xFrameEnabled = false;

    m_bHDRThumbnailProcessNeeded = false;
    m_bHDR1xExtraBufferNeeded = true;
    for (uint32_t i=0; i<m_pCapability->hdr_bracketing_setting.num_frames; i++) {
        if (0 == m_pCapability->hdr_bracketing_setting.exp_val.values[i]) {
            m_bHDR1xExtraBufferNeeded = false;
            break;
        }
    }

    // Set HDR output scaling
    char value[PROPERTY_VALUE_MAX];

    property_get("persist.camera.hdr.outcrop", value, VALUE_DISABLE);
    if (strncmp(VALUE_ENABLE, value, sizeof(VALUE_ENABLE))) {
      m_bHDROutputCropEnabled = false;
    } else {
      m_bHDROutputCropEnabled = true;
    }

    //Set Face Detection
    set(KEY_QC_SUPPORTED_FACE_DETECTION, onOffValues);
    set(KEY_QC_FACE_DETECTION, VALUE_OFF);

    //Set Face Recognition
    //set(KEY_QC_SUPPORTED_FACE_RECOGNITION, onOffValues);
    //set(KEY_QC_FACE_RECOGNITION, VALUE_OFF);

    //Set ZSL
    set(KEY_QC_SUPPORTED_ZSL_MODES, onOffValues);
#ifdef DEFAULT_ZSL_MODE_ON
    set(KEY_QC_ZSL, VALUE_ON);
    m_bZslMode = true;
#else
    set(KEY_QC_ZSL, VALUE_OFF);
    m_bZslMode = false;
#endif

    // Check if zsl mode property is enabled.
    // If yes, force the camera to be in zsl mode
    // and force zsl mode to be enabled in dual camera mode.
    memset(value, 0x0, PROPERTY_VALUE_MAX);
    property_get("persist.camera.zsl.mode", value, "0");
    int32_t zsl_mode = atoi(value);
    if((zsl_mode == 1) ||
            (m_bZslMode == true) ||
            (m_relCamSyncInfo.sync_control == CAM_SYNC_RELATED_SENSORS_ON)) {
        LOGH("%d: Forcing Camera to ZSL mode enabled");
        set(KEY_QC_ZSL, VALUE_ON);
        m_bForceZslMode = true;
        m_bZslMode = true;
        int32_t value = m_bForceZslMode;
        ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ZSL_MODE, value);
    }
    m_bZslMode_new = m_bZslMode;

    set(KEY_QC_SCENE_SELECTION, VALUE_DISABLE);

    // Rdi mode
    set(KEY_QC_SUPPORTED_RDI_MODES, enableDisableValues);
    setRdiMode(VALUE_DISABLE);

    // Secure mode
    set(KEY_QC_SUPPORTED_SECURE_MODES, enableDisableValues);
    setSecureMode(VALUE_DISABLE);

    //Set video HDR
    if ((m_pCapability->qcom_supported_feature_mask & CAM_QCOM_FEATURE_VIDEO_HDR) > 0) {
        set(KEY_QC_SUPPORTED_VIDEO_HDR_MODES, onOffValues);
        set(KEY_QC_VIDEO_HDR, VALUE_OFF);
    }

    //Set HW Sensor Snapshot HDR
    if ((m_pCapability->qcom_supported_feature_mask & CAM_QCOM_FEATURE_SENSOR_HDR)> 0) {
        set(KEY_QC_SUPPORTED_SENSOR_HDR_MODES, onOffValues);
        set(KEY_QC_SENSOR_HDR, VALUE_OFF);
        m_bSensorHDREnabled = false;
    }

    // Set VT TimeStamp
    set(KEY_QC_VT_ENABLE, VALUE_DISABLE);
    //Set Touch AF/AEC
    String8 touchValues = createValuesStringFromMap(
            TOUCH_AF_AEC_MODES_MAP, PARAM_MAP_SIZE(TOUCH_AF_AEC_MODES_MAP));

    set(KEY_QC_SUPPORTED_TOUCH_AF_AEC, touchValues);
    set(KEY_QC_TOUCH_AF_AEC, TOUCH_AF_AEC_OFF);

    //set flip mode
    if ((m_pCapability->qcom_supported_feature_mask & CAM_QCOM_FEATURE_FLIP) > 0) {
        String8 flipModes = createValuesStringFromMap(
                FLIP_MODES_MAP, PARAM_MAP_SIZE(FLIP_MODES_MAP));
        set(KEY_QC_SUPPORTED_FLIP_MODES, flipModes);
        set(KEY_QC_PREVIEW_FLIP, FLIP_MODE_OFF);
        set(KEY_QC_VIDEO_FLIP, FLIP_MODE_OFF);
        set(KEY_QC_SNAPSHOT_PICTURE_FLIP, FLIP_MODE_OFF);
    }

    // Set default Auto Exposure lock value
    setAecLock(VALUE_FALSE);

    // Set default AWB_LOCK lock value
    setAwbLock(VALUE_FALSE);

    // Set default Camera mode
    set(KEY_QC_CAMERA_MODE, 0);

    // Add support for internal preview restart
    set(KEY_INTERNAL_PERVIEW_RESTART, VALUE_TRUE);
    // Set default burst number
    set(KEY_QC_SNAPSHOT_BURST_NUM, 0);
    set(KEY_QC_NUM_RETRO_BURST_PER_SHUTTER, 0);

    //Get RAM size and disable features which are memory rich
    struct sysinfo info;
    sysinfo(&info);

    LOGH("totalram = %ld, freeram = %ld ", info.totalram,
        info.freeram);
    if (info.totalram > TOTAL_RAM_SIZE_512MB) {
        set(KEY_QC_ZSL_HDR_SUPPORTED, VALUE_TRUE);
    } else {
        m_bIsLowMemoryDevice = true;
        set(KEY_QC_ZSL_HDR_SUPPORTED, VALUE_FALSE);
    }

    setOfflineRAW();
    memset(mStreamPpMask, 0, sizeof(cam_feature_mask_t)*CAM_STREAM_TYPE_MAX);
    //Set video buffers as uncached by default
    set(KEY_QC_CACHE_VIDEO_BUFFERS, VALUE_DISABLE);

    // Set default longshot mode
    set(KEY_QC_LONG_SHOT, "off");
    //Enable longshot by default
    set(KEY_QC_LONGSHOT_SUPPORTED, VALUE_TRUE);

    int32_t rc = commitParameters();
    if (rc == NO_ERROR) {
        rc = setNumOfSnapshot();
    }

    //Set Video Rotation
    String8 videoRotationValues = createValuesStringFromMap(VIDEO_ROTATION_MODES_MAP,
            PARAM_MAP_SIZE(VIDEO_ROTATION_MODES_MAP));

    set(KEY_QC_SUPPORTED_VIDEO_ROTATION_VALUES, videoRotationValues.string());
    set(KEY_QC_VIDEO_ROTATION, VIDEO_ROTATION_0);

    //Check for EZTune
    setEztune();
    //Default set for video batch size
    set(KEY_QC_VIDEO_BATCH_SIZE, 0);

    //Setup dual-camera
    setDcrf();

    // For Aux Camera of dual camera Mode,
    // by default set no display mode
    if (m_relCamSyncInfo.mode == CAM_MODE_SECONDARY) {
        set(KEY_QC_NO_DISPLAY_MODE, 1);
        m_bNoDisplayMode = true;
    }

    cam_dimension_t pic_dim;
    pic_dim.width = 0;
    pic_dim.height = 0;

    for(uint32_t i = 0;
            i < (m_pCapability->picture_sizes_tbl_cnt - 1);
            i++) {
        if ((pic_dim.width * pic_dim.height) <
                (int32_t)(m_pCapability->picture_sizes_tbl[i].width *
                m_pCapability->picture_sizes_tbl[i].height)) {
            pic_dim.width =
                    m_pCapability->picture_sizes_tbl[i].width;
            pic_dim.height =
                    m_pCapability->picture_sizes_tbl[i].height;
        }
    }
    LOGD("max pic size = %d %d", pic_dim.width,
            pic_dim.height);
    setMaxPicSize(pic_dim);

    setManualCaptureMode(CAM_MANUAL_CAPTURE_TYPE_OFF);

    return rc;
}

/*===========================================================================
 * FUNCTION   : allocate
 *
 * DESCRIPTION: Allocate buffer memory for parameter obj (if necessary)
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::allocate()
{
    int32_t rc = NO_ERROR;

    if (m_pParamHeap != NULL) {
        return rc;
    }

    //Allocate Set Param Buffer
    m_pParamHeap = new QCameraHeapMemory(QCAMERA_ION_USE_CACHE);
    if (m_pParamHeap == NULL) {
        return NO_MEMORY;
    }

    rc = m_pParamHeap->allocate(1, sizeof(parm_buffer_t), NON_SECURE);
    if(rc != OK) {
        rc = NO_MEMORY;
        LOGE("Error!! Param buffers have not been allocated");
        delete m_pParamHeap;
        m_pParamHeap = NULL;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : init
 *
 * DESCRIPTION: initialize parameter obj
 *
 * PARAMETERS :
 *   @capabilities  : ptr to camera capabilities
 *   @mmops         : ptr to memory ops table for mapping/unmapping
 *   @adjustFPS     : object reference for additional (possibly thermal)
 *                    framerate adjustment
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::init(cam_capability_t *capabilities,
        mm_camera_vtbl_t *mmOps, QCameraAdjustFPS *adjustFPS)
{
    int32_t rc = NO_ERROR;

    m_pCapability = capabilities;
    m_pCamOpsTbl = mmOps;
    m_AdjustFPS = adjustFPS;

    if (m_pParamHeap == NULL) {
        LOGE("Parameter buffers have not been allocated");
        rc = UNKNOWN_ERROR;
        goto TRANS_INIT_ERROR1;
    }

    //Map memory for parameters buffer
    cam_buf_map_type_list bufMapList;
    rc = QCameraBufferMaps::makeSingletonBufMapList(
            CAM_MAPPING_BUF_TYPE_PARM_BUF, 0 /*stream id*/,
            0 /*buffer index*/, -1 /*plane index*/, 0 /*cookie*/,
            m_pParamHeap->getFd(0), sizeof(parm_buffer_t), bufMapList,
                    m_pParamHeap->getPtr(0));

    if (rc == NO_ERROR) {
        rc = m_pCamOpsTbl->ops->map_bufs(m_pCamOpsTbl->camera_handle,
                &bufMapList);
    }

    if(rc < 0) {
        LOGE("failed to map SETPARM buffer");
        rc = FAILED_TRANSACTION;
        goto TRANS_INIT_ERROR2;
    }
    m_pParamBuf = (parm_buffer_t*) DATA_PTR(m_pParamHeap,0);

    // Check if it is dual camera mode
    if(m_relCamSyncInfo.sync_control == CAM_SYNC_RELATED_SENSORS_ON) {
        //Allocate related cam sync buffer
        //this is needed for the payload that goes along with bundling cmd for related
        //camera use cases
        m_pRelCamSyncHeap = new QCameraHeapMemory(QCAMERA_ION_USE_CACHE);
        rc = m_pRelCamSyncHeap->allocate(1,
                sizeof(cam_sync_related_sensors_event_info_t), NON_SECURE);
        if(rc != OK) {
            rc = NO_MEMORY;
            LOGE("Failed to allocate Related cam sync Heap memory");
            goto TRANS_INIT_ERROR3;
        }

        //Map memory for related cam sync buffer
        rc = m_pCamOpsTbl->ops->map_buf(m_pCamOpsTbl->camera_handle,
                CAM_MAPPING_BUF_TYPE_SYNC_RELATED_SENSORS_BUF,
                m_pRelCamSyncHeap->getFd(0),
                sizeof(cam_sync_related_sensors_event_info_t),
                (cam_sync_related_sensors_event_info_t*)DATA_PTR(m_pRelCamSyncHeap,0));
        if(rc < 0) {
            LOGE("failed to map Related cam sync buffer");
            rc = FAILED_TRANSACTION;
            goto TRANS_INIT_ERROR4;
        }
        m_pRelCamSyncBuf =
                (cam_sync_related_sensors_event_info_t*) DATA_PTR(m_pRelCamSyncHeap,0);
    }
    initDefaultParameters();
    mCommon.init(capabilities);
    m_bInited = true;

    goto TRANS_INIT_DONE;

TRANS_INIT_ERROR4:
    m_pRelCamSyncHeap->deallocate();

TRANS_INIT_ERROR3:
    delete m_pRelCamSyncHeap;
    m_pRelCamSyncHeap = NULL;

TRANS_INIT_ERROR2:
    m_pParamHeap->deallocate();
    delete m_pParamHeap;
    m_pParamHeap = NULL;

TRANS_INIT_ERROR1:
    m_pCapability = NULL;
    m_pCamOpsTbl = NULL;
    m_AdjustFPS = NULL;

TRANS_INIT_DONE:
    return rc;
}

/*===========================================================================
 * FUNCTION   : deinit
 *
 * DESCRIPTION: deinitialize
 *
 * PARAMETERS : none
 *
 * RETURN     : none
 *==========================================================================*/
void QCameraParameters::deinit()
{
    if (!m_bInited) {
        return;
    }

    //clear all entries in the map
    String8 emptyStr;
    QCameraParameters::unflatten(emptyStr);

    if ((NULL != m_pCamOpsTbl) && (m_pCamOpsTbl->ops != NULL)) {
        m_pCamOpsTbl->ops->unmap_buf(
                             m_pCamOpsTbl->camera_handle,
                             CAM_MAPPING_BUF_TYPE_PARM_BUF);

        if (m_relCamSyncInfo.sync_control == CAM_SYNC_RELATED_SENSORS_ON) {
            m_pCamOpsTbl->ops->unmap_buf(
                    m_pCamOpsTbl->camera_handle,
                    CAM_MAPPING_BUF_TYPE_SYNC_RELATED_SENSORS_BUF);
        }
    }

    m_pCapability = NULL;
    if (NULL != m_pParamHeap) {
        m_pParamHeap->deallocate();
        delete m_pParamHeap;
        m_pParamHeap = NULL;
        m_pParamBuf = NULL;
    }
    if (NULL != m_pRelCamSyncHeap) {
        m_pRelCamSyncHeap->deallocate();
        delete m_pRelCamSyncHeap;
        m_pRelCamSyncHeap = NULL;
        m_pRelCamSyncBuf = NULL;
    }

    m_AdjustFPS = NULL;
    m_tempMap.clear();
    m_pCamOpsTbl = NULL;
    m_AdjustFPS = NULL;

    m_bInited = false;
}

/*===========================================================================
 * FUNCTION   : parse_pair
 *
 * DESCRIPTION: helper function to parse string like "640x480" or "10000,20000"
 *
 * PARAMETERS :
 *   @str     : input string to be parse
 *   @first   : [output] first value of the pair
 *   @second  : [output]  second value of the pair
 *   @delim   : [input] delimeter to seperate the pair
 *   @endptr  : [output] ptr to the end of the pair string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::parse_pair(const char *str,
                                      int *first,
                                      int *second,
                                      char delim,
                                      char **endptr = NULL)
{
    // Find the first integer.
    char *end;
    int w = (int)strtol(str, &end, 10);
    // If a delimeter does not immediately follow, give up.
    if (*end != delim) {
        LOGE("Cannot find delimeter (%c) in str=%s", delim, str);
        return BAD_VALUE;
    }

    // Find the second integer, immediately after the delimeter.
    int h = (int)strtol(end+1, &end, 10);

    *first = w;
    *second = h;

    if (endptr) {
        *endptr = end;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : parseSizesList
 *
 * DESCRIPTION: helper function to parse string containing sizes
 *
 * PARAMETERS :
 *   @sizesStr: [input] input string to be parse
 *   @sizes   : [output] reference to store parsed sizes
 *
 * RETURN     : none
 *==========================================================================*/
void QCameraParameters::parseSizesList(const char *sizesStr, Vector<Size> &sizes)
{
    if (sizesStr == 0) {
        return;
    }

    char *sizeStartPtr = (char *)sizesStr;

    while (true) {
        int width, height;
        int success = parse_pair(sizeStartPtr, &width, &height, 'x',
                                 &sizeStartPtr);
        if (success == -1 || (*sizeStartPtr != ',' && *sizeStartPtr != '\0')) {
            LOGE("Picture sizes string \"%s\" contains invalid character.", sizesStr);
            return;
        }
        sizes.push(Size(width, height));

        if (*sizeStartPtr == '\0') {
            return;
        }
        sizeStartPtr++;
    }
}

/*===========================================================================
 * FUNCTION   : adjustPreviewFpsRange
 *
 * DESCRIPTION: adjust preview FPS ranges
 *              according to external events
 *
 * PARAMETERS :
 *   @minFPS  : min FPS value
 *   @maxFPS  : max FPS value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::adjustPreviewFpsRange(cam_fps_range_t *fpsRange)
{
    if ( fpsRange == NULL ) {
        return BAD_VALUE;
    }

    if ( m_pParamBuf == NULL ) {
        return NO_INIT;
    }

    int32_t rc = initBatchUpdate(m_pParamBuf);
    if ( rc != NO_ERROR ) {
        LOGE("Failed to initialize group update table");
        return rc;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_FPS_RANGE, *fpsRange)) {
        LOGE("Parameters batch failed");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if ( rc != NO_ERROR ) {
        LOGE("Failed to commit batch parameters");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setPreviewFpsRanges
 *
 * DESCRIPTION: set preview FPS ranges
 *
 * PARAMETERS :
 *   @minFPS  : min FPS value
 *   @maxFPS  : max FPS value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setPreviewFpsRange(int min_fps,
        int max_fps, int vid_min_fps,int vid_max_fps)
{
    char str[32];
    char value[PROPERTY_VALUE_MAX];
    int fixedFpsValue;
    /*This property get value should be the fps that user needs*/
    property_get("persist.debug.set.fixedfps", value, "0");
    fixedFpsValue = atoi(value);

    LOGD("E minFps = %d, maxFps = %d , vid minFps = %d, vid maxFps = %d",
                 min_fps, max_fps, vid_min_fps, vid_max_fps);

    if(fixedFpsValue != 0) {
        min_fps = max_fps = fixedFpsValue*1000;
        if (!isHfrMode()) {
             vid_min_fps = vid_max_fps = fixedFpsValue*1000;
        }
    }
    snprintf(str, sizeof(str), "%d,%d", min_fps, max_fps);
    LOGH("Setting preview fps range %s", str);
    updateParamEntry(KEY_PREVIEW_FPS_RANGE, str);
    cam_fps_range_t fps_range;
    memset(&fps_range, 0x00, sizeof(cam_fps_range_t));
    fps_range.min_fps = (float)min_fps / 1000.0f;
    fps_range.max_fps = (float)max_fps / 1000.0f;
    fps_range.video_min_fps = (float)vid_min_fps / 1000.0f;
    fps_range.video_max_fps = (float)vid_max_fps / 1000.0f;

    LOGH("Updated: minFps = %d, maxFps = %d ,"
            " vid minFps = %d, vid maxFps = %d",
             min_fps, max_fps, vid_min_fps, vid_max_fps);

    if ( NULL != m_AdjustFPS ) {
        if (m_ThermalMode == QCAMERA_THERMAL_ADJUST_FPS &&
                !m_bRecordingHint) {
            float minVideoFps = min_fps, maxVideoFps = max_fps;
            if (isHfrMode()) {
                minVideoFps = m_hfrFpsRange.video_min_fps;
                maxVideoFps = m_hfrFpsRange.video_max_fps;
            }
            m_AdjustFPS->recalcFPSRange(min_fps, max_fps, minVideoFps, maxVideoFps, fps_range);
            LOGH("Thermal adjusted Preview fps range %3.2f,%3.2f, %3.2f, %3.2f",
                   fps_range.min_fps, fps_range.max_fps,
                  fps_range.video_min_fps, fps_range.video_max_fps);
        }
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_FPS_RANGE, fps_range)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}


/*===========================================================================
 * FUNCTION   : setAutoExposure
 *
 * DESCRIPTION: set auto exposure
 *
 * PARAMETERS :
 *   @autoExp : auto exposure value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAutoExposure(const char *autoExp)
{
    if (autoExp != NULL) {
        int32_t value = lookupAttr(AUTO_EXPOSURE_MAP, PARAM_MAP_SIZE(AUTO_EXPOSURE_MAP), autoExp);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting auto exposure %s", autoExp);
            updateParamEntry(KEY_QC_AUTO_EXPOSURE, autoExp);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_AEC_ALGO_TYPE, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid auto exposure value: %s", (autoExp == NULL) ? "NULL" : autoExp);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setEffect
 *
 * DESCRIPTION: set effect
 *
 * PARAMETERS :
 *   @effect  : effect value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setEffect(const char *effect)
{
    if (effect != NULL) {
        int32_t value = lookupAttr(EFFECT_MODES_MAP, PARAM_MAP_SIZE(EFFECT_MODES_MAP), effect);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting effect %s", effect);
            updateParamEntry(KEY_EFFECT, effect);
            uint8_t prmEffect = static_cast<uint8_t>(value);
            mParmEffect = prmEffect;
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_EFFECT, prmEffect)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid effect value: %s", (effect == NULL) ? "NULL" : effect);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setBrightness
 *
 * DESCRIPTION: set brightness control value
 *
 * PARAMETERS :
 *   @brightness  : brightness control value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setBrightness(int brightness)
{
    char val[16];
    snprintf(val, sizeof(val), "%d", brightness);
    updateParamEntry(KEY_QC_BRIGHTNESS, val);

    LOGH("Setting brightness %s", val);
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_BRIGHTNESS, brightness)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setFocusMode
 *
 * DESCRIPTION: set focus mode
 *
 * PARAMETERS :
 *   @focusMode  : focus mode value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFocusMode(const char *focusMode)
{
    if (focusMode != NULL) {
        int32_t value = lookupAttr(FOCUS_MODES_MAP, PARAM_MAP_SIZE(FOCUS_MODES_MAP), focusMode);
        if (value != NAME_NOT_FOUND) {
            int32_t rc = NO_ERROR;
            LOGH("Setting focus mode %s", focusMode);
            mFocusMode = (cam_focus_mode_type)value;

            updateParamEntry(KEY_FOCUS_MODE, focusMode);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
                    CAM_INTF_PARM_FOCUS_MODE, (uint8_t)value)) {
                rc = BAD_VALUE;
            }
            if (strcmp(focusMode,"infinity")==0){
                set(QCameraParameters::KEY_FOCUS_DISTANCES, "Infinity,Infinity,Infinity");
            }
            return rc;
        }
    }
    LOGE("Invalid focus mode value: %s", (focusMode == NULL) ? "NULL" : focusMode);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setFocusPosition
 *
 * DESCRIPTION: set focus position
 *
 * PARAMETERS :
 *   @typeStr : focus position type, index or dac_code
 *   @posStr : focus positon.
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setFocusPosition(const char *typeStr, const char *posStr)
{
    LOGH(", type:%s, pos: %s", typeStr, posStr);
    int32_t type = atoi(typeStr);
    float pos = (float) atof(posStr);

    if ((type >= CAM_MANUAL_FOCUS_MODE_INDEX) &&
            (type < CAM_MANUAL_FOCUS_MODE_MAX)) {
        // get max and min focus position from m_pCapability
        float minFocusPos = m_pCapability->min_focus_pos[type];
        float maxFocusPos = m_pCapability->max_focus_pos[type];
        LOGH(", focusPos min: %f, max: %f", minFocusPos, maxFocusPos);

        if (pos >= minFocusPos && pos <= maxFocusPos) {
            updateParamEntry(KEY_QC_MANUAL_FOCUS_POS_TYPE, typeStr);
            updateParamEntry(KEY_QC_MANUAL_FOCUS_POSITION, posStr);

            cam_manual_focus_parm_t manual_focus;
            manual_focus.flag = (cam_manual_focus_mode_type)type;
            if (manual_focus.flag == CAM_MANUAL_FOCUS_MODE_DIOPTER) {
                manual_focus.af_manual_diopter = pos;
            } else if (manual_focus.flag == CAM_MANUAL_FOCUS_MODE_RATIO) {
                manual_focus.af_manual_lens_position_ratio = (int32_t) pos;
            } else if (manual_focus.flag == CAM_MANUAL_FOCUS_MODE_INDEX) {
                manual_focus.af_manual_lens_position_index = (int32_t) pos;
            } else {
                manual_focus.af_manual_lens_position_dac = (int32_t) pos;
            }

            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_MANUAL_FOCUS_POS,
                    manual_focus)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }

    LOGE("invalid params, type:%d, pos: %f", type, pos);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : updateAEInfo
 *
 * DESCRIPTION: update exposure information from metadata callback
 *
 * PARAMETERS :
 *   @ae_params : auto exposure params
 *
 * RETURN     : void
 *==========================================================================*/
void  QCameraParameters::updateAEInfo(cam_3a_params_t &ae_params)
{
    const char *prevExpTime = get(KEY_QC_CURRENT_EXPOSURE_TIME);
    char newExpTime[15];
    snprintf(newExpTime, sizeof(newExpTime), "%f", ae_params.exp_time*1000.0);

    if (prevExpTime == NULL || strcmp(prevExpTime, newExpTime)) {
        LOGD("update exposure time: old: %s, new: %s", prevExpTime, newExpTime);
        set(KEY_QC_CURRENT_EXPOSURE_TIME, newExpTime);
    }

    int32_t prevISO = getInt(KEY_QC_CURRENT_ISO);
    int32_t newISO = ae_params.iso_value;
    if (prevISO != newISO) {
        LOGD("update iso: old:%d, new:%d", prevISO, newISO);
        set(KEY_QC_CURRENT_ISO, newISO);
    }
}

/*===========================================================================
 * FUNCTION   : updateCurrentFocusPosition
 *
 * DESCRIPTION: update current focus position from metadata callback
 *
 * PARAMETERS :
 *   @pos : current focus position
 *
 * RETURN     : void
 *==========================================================================*/
void  QCameraParameters::updateCurrentFocusPosition(cam_focus_pos_info_t &cur_pos_info)
{
    int prevScalePos = getInt(KEY_QC_FOCUS_POSITION_SCALE);
    int newScalePos = (int) cur_pos_info.scale;
    if (prevScalePos != newScalePos) {
        LOGD("update focus scale: old:%d, new:%d", prevScalePos, newScalePos);
        set(KEY_QC_FOCUS_POSITION_SCALE, newScalePos);
    }

    float prevDiopterPos = getFloat(KEY_QC_FOCUS_POSITION_DIOPTER);
    float newDiopterPos = cur_pos_info.diopter;
    if (prevDiopterPos != newDiopterPos) {
        LOGD("update focus diopter: old:%f, new:%f", prevDiopterPos, newDiopterPos);
        setFloat(KEY_QC_FOCUS_POSITION_DIOPTER, newDiopterPos);
    }
}

/*===========================================================================
 * FUNCTION   : setSharpness
 *
 * DESCRIPTION: set sharpness control value
 *
 * PARAMETERS :
 *   @sharpness  : sharpness control value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSharpness(int sharpness)
{
    char val[16];
    snprintf(val, sizeof(val), "%d", sharpness);
    updateParamEntry(KEY_QC_SHARPNESS, val);
    LOGH("Setting sharpness %s", val);
    m_nSharpness = sharpness;
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_SHARPNESS, m_nSharpness)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSkinToneEnhancement
 *
 * DESCRIPTION: set skin tone enhancement value
 *
 * PARAMETERS :
 *   @sceFactore  : skin tone enhancement factor value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSkinToneEnhancement(int sceFactor)
{
    char val[16];
    snprintf(val, sizeof(val), "%d", sceFactor);
    updateParamEntry(KEY_QC_SCE_FACTOR, val);
    LOGH("Setting skintone enhancement %s", val);

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_SCE_FACTOR, sceFactor)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSaturation
 *
 * DESCRIPTION: set saturation control value
 *
 * PARAMETERS :
 *   @saturation : saturation control value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSaturation(int saturation)
{
    char val[16];
    snprintf(val, sizeof(val), "%d", saturation);
    updateParamEntry(KEY_QC_SATURATION, val);
    LOGH("Setting saturation %s", val);

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_SATURATION, saturation)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setContrast
 *
 * DESCRIPTION: set contrast control value
 *
 * PARAMETERS :
 *   @contrast : contrast control value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setContrast(int contrast)
{
    char val[16];
    snprintf(val, sizeof(val), "%d", contrast);
    updateParamEntry(KEY_QC_CONTRAST, val);
    LOGH("Setting contrast %s", val);

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_CONTRAST, contrast)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setSceneDetect
 *
 * DESCRIPTION: set scenen detect value
 *
 * PARAMETERS :
 *   @sceneDetect  : scene detect value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSceneDetect(const char *sceneDetect)
{
    if (sceneDetect != NULL) {
        int32_t value = lookupAttr(ON_OFF_MODES_MAP, PARAM_MAP_SIZE(ON_OFF_MODES_MAP),
                sceneDetect);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting Scene Detect %s", sceneDetect);
            updateParamEntry(KEY_QC_SCENE_DETECT, sceneDetect);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ASD_ENABLE, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid Scene Detect value: %s",
          (sceneDetect == NULL) ? "NULL" : sceneDetect);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setSensorSnapshotHDR
 *
 * DESCRIPTION: set snapshot HDR value
 *
 * PARAMETERS :
 *   @snapshotHDR  : snapshot HDR value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSensorSnapshotHDR(const char *snapshotHDR)
{
    if (snapshotHDR != NULL) {
        int32_t value = (cam_sensor_hdr_type_t) lookupAttr(ON_OFF_MODES_MAP,
                PARAM_MAP_SIZE(ON_OFF_MODES_MAP), snapshotHDR);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting Sensor Snapshot HDR %s", snapshotHDR);
            updateParamEntry(KEY_QC_SENSOR_HDR, snapshotHDR);

            char zz_prop[PROPERTY_VALUE_MAX];
            memset(zz_prop, 0, sizeof(zz_prop));
            property_get("persist.camera.zzhdr.enable", zz_prop, "0");
            uint8_t zzhdr_enable = (uint8_t)atoi(zz_prop);

            if (zzhdr_enable && (value != CAM_SENSOR_HDR_OFF)) {
                value = CAM_SENSOR_HDR_ZIGZAG;
                LOGH("%s: Overriding to ZZ HDR Mode", __func__);
            }

            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_SENSOR_HDR, (cam_sensor_hdr_type_t)value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid Snapshot HDR value: %s",
          (snapshotHDR == NULL) ? "NULL" : snapshotHDR);
    return BAD_VALUE;

}


/*===========================================================================
 * FUNCTION   : setVideoHDR
 *
 * DESCRIPTION: set video HDR value
 *
 * PARAMETERS :
 *   @videoHDR  : svideo HDR value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setVideoHDR(const char *videoHDR)
{
    if (videoHDR != NULL) {
        int32_t value = lookupAttr(ON_OFF_MODES_MAP, PARAM_MAP_SIZE(ON_OFF_MODES_MAP), videoHDR);
        if (value != NAME_NOT_FOUND) {

            char zz_prop[PROPERTY_VALUE_MAX];
            memset(zz_prop, 0, sizeof(zz_prop));
            property_get("persist.camera.zzhdr.video", zz_prop, "0");
            uint8_t use_zzhdr_video = (uint8_t)atoi(zz_prop);

            if (use_zzhdr_video) {
                LOGH("%s: Using ZZ HDR for video mode", __func__);
                if (value)
                    value = CAM_SENSOR_HDR_ZIGZAG;
                else
                    value = CAM_SENSOR_HDR_OFF;
                LOGH("%s: Overriding to sensor HDR Mode to:%d", __func__, value);
                if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_SENSOR_HDR, (cam_sensor_hdr_type_t) value)) {
                    LOGE("%s: Override to sensor HDR mode for video HDR failed", __func__);
                    return BAD_VALUE;
                }
                updateParamEntry(KEY_QC_VIDEO_HDR, videoHDR);
            } else {
                LOGH("%s: Setting Video HDR %s", __func__, videoHDR);
                updateParamEntry(KEY_QC_VIDEO_HDR, videoHDR);
                if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_VIDEO_HDR, value)) {
                    return BAD_VALUE;
                }
            }

            return NO_ERROR;
        }
    }
    LOGE("Invalid Video HDR value: %s",
          (videoHDR == NULL) ? "NULL" : videoHDR);
    return BAD_VALUE;
}


/*===========================================================================
 * FUNCTION   : setVtEnable
 *
 * DESCRIPTION: set vt Enable value
 *
 * PARAMETERS :
 *   @videoHDR  : svtEnable value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setVtEnable(const char *vtEnable)
{
    if (vtEnable != NULL) {
        int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), vtEnable);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting Vt Enable %s", vtEnable);
            m_bAVTimerEnabled = true;
            updateParamEntry(KEY_QC_VT_ENABLE, vtEnable);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_VT, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid Vt Enable value: %s",
          (vtEnable == NULL) ? "NULL" : vtEnable);
    m_bAVTimerEnabled = false;
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setFaceRecognition
 *
 * DESCRIPTION: set face recognition value
 *
 * PARAMETERS :
 *   @faceRecog  : face recognition value string
 *   @maxFaces   : number of max faces to be detected/recognized
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFaceRecognition(const char *faceRecog,
        uint32_t maxFaces)
{
    if (faceRecog != NULL) {
        int32_t value = lookupAttr(ON_OFF_MODES_MAP, PARAM_MAP_SIZE(ON_OFF_MODES_MAP), faceRecog);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting face recognition %s", faceRecog);
            updateParamEntry(KEY_QC_FACE_RECOGNITION, faceRecog);

            uint32_t faceProcMask = m_nFaceProcMask;
            if (value > 0) {
                faceProcMask |= CAM_FACE_PROCESS_MASK_RECOGNITION;
            } else {
                faceProcMask &= (uint32_t)(~CAM_FACE_PROCESS_MASK_RECOGNITION);
            }

            if(m_nFaceProcMask == faceProcMask) {
                LOGH("face process mask not changed, no ops here");
                return NO_ERROR;
            }
            m_nFaceProcMask = faceProcMask;
            LOGH("FaceProcMask -> %d", m_nFaceProcMask);

            // set parm for face process
            cam_fd_set_parm_t fd_set_parm;
            memset(&fd_set_parm, 0, sizeof(cam_fd_set_parm_t));
            fd_set_parm.fd_mode = m_nFaceProcMask;
            fd_set_parm.num_fd = maxFaces;

            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_FD, fd_set_parm)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid face recognition value: %s", (faceRecog == NULL) ? "NULL" : faceRecog);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setZoom
 *
 * DESCRIPTION: set zoom level
 *
 * PARAMETERS :
 *   @zoom_level : zoom level
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setZoom(int zoom_level)
{
    char val[16];
    snprintf(val, sizeof(val), "%d", zoom_level);
    updateParamEntry(KEY_ZOOM, val);
    LOGH("zoom level: %d", zoom_level);
    mZoomLevel = zoom_level;
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ZOOM, zoom_level)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setISOValue
 *
 * DESCRIPTION: set ISO value
 *
 * PARAMETERS :
 *   @isoValue : ISO value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setISOValue(const char *isoValue)
{
    if (isoValue != NULL) {
        if (!strcmp(isoValue, ISO_MANUAL)) {
            LOGD("iso manual mode - use continuous iso");
            updateParamEntry(KEY_QC_ISO_MODE, isoValue);
            return NO_ERROR;
        }
        int32_t value = lookupAttr(ISO_MODES_MAP, PARAM_MAP_SIZE(ISO_MODES_MAP), isoValue);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting ISO value %s", isoValue);
            updateParamEntry(KEY_QC_ISO_MODE, isoValue);

            cam_intf_parm_manual_3a_t iso_settings;
            memset(&iso_settings, 0, sizeof(cam_intf_parm_manual_3a_t));
            iso_settings.previewOnly = FALSE;
            iso_settings.value = value;
            if (getManualCaptureMode() != CAM_MANUAL_CAPTURE_TYPE_OFF) {
                iso_settings.previewOnly = TRUE;
            }

            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ISO, iso_settings)) {
                return BAD_VALUE;
            }
            m_isoValue = value;
            return NO_ERROR;
        }
    }
    LOGE("Invalid ISO value: %s",
          (isoValue == NULL) ? "NULL" : isoValue);
    return BAD_VALUE;
}


/*===========================================================================
 * FUNCTION   : setContinuousISO
 *
 * DESCRIPTION: set continuous ISO value
 *
 * PARAMETERS :
 *   @params : ISO value parameter
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setContinuousISO(const QCameraParameters& params)
{
    const char *iso = params.get(KEY_QC_ISO_MODE);
    LOGD("current iso mode: %s", iso);

    if (iso != NULL) {
        if (strcmp(iso, ISO_MANUAL)) {
            LOGD("dont set iso to back-end.");
            return NO_ERROR;
        }
    }

    const char *str = params.get(KEY_QC_CONTINUOUS_ISO);
    const char *prev_str = get(KEY_QC_CONTINUOUS_ISO);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setContinuousISO(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setExposureTime
 *
 * DESCRIPTION: set exposure time
 *
 * PARAMETERS :
 *   @expTimeStr : string of exposure time in ms
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setExposureTime(const char *expTimeStr)
{
    if (expTimeStr != NULL) {
        double expTimeMs = atof(expTimeStr);
        //input is in milli seconds. Convert to nano sec for backend
        int64_t expTimeNs = (int64_t)(expTimeMs*1000000L);

        // expTime == 0 means not to use manual exposure time.
        if ((0 <= expTimeNs) &&
                ((expTimeNs == 0) ||
                ((expTimeNs >= m_pCapability->exposure_time_range[0]) &&
                (expTimeNs <= m_pCapability->exposure_time_range[1])))) {
            LOGH(", exposure time: %f ms", expTimeMs);
            updateParamEntry(KEY_QC_EXPOSURE_TIME, expTimeStr);

            cam_intf_parm_manual_3a_t exp_settings;
            memset(&exp_settings, 0, sizeof(cam_intf_parm_manual_3a_t));
            if (getManualCaptureMode() != CAM_MANUAL_CAPTURE_TYPE_OFF) {
                exp_settings.previewOnly = TRUE;
                if (expTimeMs < QCAMERA_MAX_EXP_TIME_LEVEL1) {
                    exp_settings.value = expTimeNs;
                } else {
                    exp_settings.value =
                            (int64_t)(QCAMERA_MAX_EXP_TIME_LEVEL1*1000000L);
                }
            } else {
                exp_settings.previewOnly = FALSE;
                exp_settings.value = expTimeNs;
            }

            //Based on exposure values we can decide the capture type here
            if (getManualCaptureMode() != CAM_MANUAL_CAPTURE_TYPE_OFF) {
                if (expTimeMs < QCAMERA_MAX_EXP_TIME_LEVEL1) {
                    setManualCaptureMode(CAM_MANUAL_CAPTURE_TYPE_1);
                } else if (expTimeMs < QCAMERA_MAX_EXP_TIME_LEVEL2) {
                    setManualCaptureMode(CAM_MANUAL_CAPTURE_TYPE_2);
                } else if (expTimeMs < QCAMERA_MAX_EXP_TIME_LEVEL4) {
                    setManualCaptureMode(CAM_MANUAL_CAPTURE_TYPE_3);
                } else {
                    setManualCaptureMode(CAM_MANUAL_CAPTURE_TYPE_OFF);
                }
            }

            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_EXPOSURE_TIME,
                    exp_settings)) {
                return BAD_VALUE;
            }
            m_expTime = expTimeNs;

            return NO_ERROR;
        }
    }

    LOGE("Invalid exposure time, value: %s",
          (expTimeStr == NULL) ? "NULL" : expTimeStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setLongshotEnable
 *
 * DESCRIPTION: set a flag indicating longshot mode
 *
 * PARAMETERS :
 *   @enable  : true - Longshot enabled
 *              false - Longshot disabled
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setLongshotEnable(bool enable)
{
    int32_t rc = NO_ERROR;
    int8_t value = enable ? 1 : 0;

    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_LONGSHOT_ENABLE, value)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to parameter changes");
        return rc;
    }

    m_bLongshotEnabled = enable;

    return rc;
}

/*===========================================================================
 * FUNCTION   : setFlash
 *
 * DESCRIPTION: set flash mode
 *
 * PARAMETERS :
 *   @flashStr : LED flash mode value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFlash(const char *flashStr)
{
    if (flashStr != NULL) {
        int32_t value = lookupAttr(FLASH_MODES_MAP, PARAM_MAP_SIZE(FLASH_MODES_MAP), flashStr);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting Flash value %s", flashStr);
            updateParamEntry(KEY_FLASH_MODE, flashStr);
            mFlashValue = value;
            return NO_ERROR;
        }
    }
    LOGE("Invalid flash value: %s", (flashStr == NULL) ? "NULL" : flashStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : updateFlashMode
 *
 * DESCRIPTION: update flash mode
 *
 * PARAMETERS :
 *   @flashStr : LED flash mode value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateFlashMode(cam_flash_mode_t flash_mode)
{
    int32_t rc = NO_ERROR;
    if (flash_mode >= CAM_FLASH_MODE_MAX) {
        LOGH("Error!! Invalid flash mode (%d)", flash_mode);
        return BAD_VALUE;
    }
    LOGH("Setting Flash mode from EZTune %d", flash_mode);

    const char *flash_mode_str = lookupNameByValue(FLASH_MODES_MAP,
            PARAM_MAP_SIZE(FLASH_MODES_MAP), flash_mode);
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }
    rc = setFlash(flash_mode_str);
    if (rc != NO_ERROR) {
        LOGE("Failed to update Flash mode");
        return rc;
    }

    LOGH("Setting Flash mode %d", mFlashValue);
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_LED_MODE, mFlashValue)) {
        LOGE("Failed to set led mode");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to commit parameters");
        return rc;
    }

    return NO_ERROR;
}


/*===========================================================================
 * FUNCTION   : configureFlash
 *
 * DESCRIPTION: configure Flash Bracketing.
 *
 * PARAMETERS :
 *    @frame_config : output configuration structure to fill in.
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::configureFlash(cam_capture_frame_config_t &frame_config)
{
    LOGH("E");
    int32_t rc = NO_ERROR;
    uint32_t i = 0;

    if (isChromaFlashEnabled()) {

        rc = setToneMapMode(false, false);
        if (rc != NO_ERROR) {
            LOGE("Failed to configure tone map");
            return rc;
        }

        rc = setCDSMode(CAM_CDS_MODE_OFF, false);
        if (rc != NO_ERROR) {
            LOGE("Failed to configure csd mode");
            return rc;
        }

        LOGH("Enable Chroma Flash capture");
        cam_flash_mode_t flash_mode = CAM_FLASH_MODE_OFF;
        frame_config.num_batch =
                m_pCapability->chroma_flash_settings_need.burst_count;
        if (frame_config.num_batch > CAM_MAX_FLASH_BRACKETING) {
            frame_config.num_batch = CAM_MAX_FLASH_BRACKETING;
        }
        for (i = 0; i < frame_config.num_batch; i++) {
            flash_mode = (m_pCapability->chroma_flash_settings_need.flash_bracketing[i]) ?
                    CAM_FLASH_MODE_ON:CAM_FLASH_MODE_OFF;
            frame_config.configs[i].num_frames = 1;
            frame_config.configs[i].type = CAM_CAPTURE_FLASH;
            frame_config.configs[i].flash_mode = flash_mode;
        }
    } else if (mFlashValue != CAM_FLASH_MODE_OFF) {
        frame_config.num_batch = 1;
        for (i = 0; i < frame_config.num_batch; i++) {
            frame_config.configs[i].num_frames = getNumOfSnapshots();
            frame_config.configs[i].type = CAM_CAPTURE_FLASH;
            frame_config.configs[i].flash_mode =(cam_flash_mode_t)mFlashValue;
        }
    }

    LOGD("Flash frame batch cnt = %d",frame_config.num_batch);
    return rc;
}

/*===========================================================================
 * FUNCTION   : configureHDRBracketing
 *
 * DESCRIPTION: configure HDR Bracketing.
 *
 * PARAMETERS :
 *    @frame_config : output configuration structure to fill in.
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::configureHDRBracketing(cam_capture_frame_config_t &frame_config)
{
    LOGH("E");
    int32_t rc = NO_ERROR;
    uint32_t i = 0;

    uint32_t hdrFrameCount = m_pCapability->hdr_bracketing_setting.num_frames;
    LOGH("HDR values %d, %d frame count: %u",
          (int8_t) m_pCapability->hdr_bracketing_setting.exp_val.values[0],
          (int8_t) m_pCapability->hdr_bracketing_setting.exp_val.values[1],
          hdrFrameCount);

    frame_config.num_batch = hdrFrameCount;

    cam_bracket_mode mode =
            m_pCapability->hdr_bracketing_setting.exp_val.mode;
    if (mode == CAM_EXP_BRACKETING_ON) {
        rc = setToneMapMode(false, true);
        if (rc != NO_ERROR) {
            LOGW("Failed to disable tone map during HDR");
        }
    }
    for (i = 0; i < frame_config.num_batch; i++) {
        frame_config.configs[i].num_frames = 1;
        frame_config.configs[i].type = CAM_CAPTURE_BRACKETING;
        frame_config.configs[i].hdr_mode.mode = mode;
        frame_config.configs[i].hdr_mode.values =
                m_pCapability->hdr_bracketing_setting.exp_val.values[i];
        LOGD("exp values %d",
                (int)frame_config.configs[i].hdr_mode.values);
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : configureAEBracketing
 *
 * DESCRIPTION: configure AE Bracketing.
 *
 * PARAMETERS :
 *    @frame_config : output configuration structure to fill in.
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::configureAEBracketing(cam_capture_frame_config_t &frame_config)
{
    LOGH("E");
    int32_t rc = NO_ERROR;
    uint32_t i = 0;
    char exp_value[MAX_EXP_BRACKETING_LENGTH];

    rc = setToneMapMode(false, true);
    if (rc != NO_ERROR) {
        LOGH("Failed to disable tone map during AEBracketing");
    }

    uint32_t burstCount = 0;
    const char *str_val = m_AEBracketingClient.values;
    if ((str_val != NULL) && (strlen(str_val) > 0)) {
        char prop[PROPERTY_VALUE_MAX];
        memset(prop, 0, sizeof(prop));
        strlcpy(prop, str_val, PROPERTY_VALUE_MAX);
        char *saveptr = NULL;
        char *token = strtok_r(prop, ",", &saveptr);
        if (token != NULL) {
            exp_value[burstCount++] = (char)atoi(token);
            while (token != NULL) {
                token = strtok_r(NULL, ",", &saveptr);
                if (token != NULL) {
                    exp_value[burstCount++] = (char)atoi(token);
                }
            }
        }
    }

    frame_config.num_batch = burstCount;
    cam_bracket_mode mode = m_AEBracketingClient.mode;

    for (i = 0; i < frame_config.num_batch; i++) {
        frame_config.configs[i].num_frames = 1;
        frame_config.configs[i].type = CAM_CAPTURE_BRACKETING;
        frame_config.configs[i].hdr_mode.mode = mode;
        frame_config.configs[i].hdr_mode.values =
                m_AEBracketingClient.values[i];
        LOGD("exp values %d", (int)m_AEBracketingClient.values[i]);
    }

    LOGH("num_frame = %d X", burstCount);
    return rc;
}

/*===========================================================================
 * FUNCTION   : configureLowLight
 *
 * DESCRIPTION: configure low light frame capture use case.
 *
 * PARAMETERS :
 *    @frame_config : output configuration structure to fill in.
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::configureLowLight(cam_capture_frame_config_t &frame_config)
{
    int32_t rc = NO_ERROR;

    frame_config.num_batch = 1;
    frame_config.configs[0].num_frames = getNumOfSnapshots();
    frame_config.configs[0].type = CAM_CAPTURE_LOW_LIGHT;
    frame_config.configs[0].low_light_mode = CAM_LOW_LIGHT_ON;
    LOGH("Snapshot Count: %d", frame_config.configs[0].num_frames);
    return rc;
}

/*===========================================================================
 * FUNCTION   : configureManualCapture
 *
 * DESCRIPTION: configure manual capture.
 *
 * PARAMETERS :
 *    @frame_config : output configaration structure to fill in.
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::configureManualCapture(cam_capture_frame_config_t &frame_config)
{
    int32_t rc = NO_ERROR;
    uint32_t i = 0;

    LOGD("E");
    if (getManualCaptureMode()) {
        frame_config.num_batch = 1;
        for (i = 0; i < frame_config.num_batch; i++) {
            frame_config.configs[i].num_frames = getNumOfSnapshots();
            frame_config.configs[i].type = CAM_CAPTURE_MANUAL_3A;
            if (m_expTime != 0) {
                frame_config.configs[i].manual_3A_mode.exp_mode = CAM_SETTINGS_TYPE_ON;
                frame_config.configs[i].manual_3A_mode.exp_time = m_expTime;
            } else {
                frame_config.configs[i].manual_3A_mode.exp_mode = CAM_SETTINGS_TYPE_AUTO;
                frame_config.configs[i].manual_3A_mode.exp_time = 0;
            }

            if (m_isoValue != 0) {
                frame_config.configs[i].manual_3A_mode.iso_mode = CAM_SETTINGS_TYPE_ON;
                frame_config.configs[i].manual_3A_mode.iso_value = m_isoValue;
            } else {
                frame_config.configs[i].manual_3A_mode.iso_mode = CAM_SETTINGS_TYPE_AUTO;
                frame_config.configs[i].manual_3A_mode.iso_value = 0;
            }
        }
    }
    LOGD("X: batch cnt = %d", frame_config.num_batch);
    return rc;
}

/*===========================================================================
 * FUNCTION   : configFrameCapture
 *
 * DESCRIPTION: configuration for ZSL special captures (FLASH/HDR etc)
 *
 * PARAMETERS :
 *   @commitSettings : flag to enable or disable commit this this settings
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::configFrameCapture(bool commitSettings)
{
    int32_t rc = NO_ERROR;
    int32_t value;

    memset(&m_captureFrameConfig, 0, sizeof(cam_capture_frame_config_t));

    if (commitSettings) {
        if(initBatchUpdate(m_pParamBuf) < 0 ) {
            LOGE("Failed to initialize group update table");
            return BAD_TYPE;
        }
    }

    if (isHDREnabled() || m_bAeBracketingEnabled || m_bAFBracketingOn ||
          m_bOptiZoomOn || m_bReFocusOn || m_LowLightLevel
          || getManualCaptureMode()) {
        value = CAM_FLASH_MODE_OFF;
    } else if (isChromaFlashEnabled()) {
        value = CAM_FLASH_MODE_ON;
    } else {
        value = mFlashValue;
    }

    if (value != CAM_FLASH_MODE_OFF) {
        configureFlash(m_captureFrameConfig);
    } else if(isHDREnabled()) {
        configureHDRBracketing (m_captureFrameConfig);
    } else if(isAEBracketEnabled()) {
        configureAEBracketing (m_captureFrameConfig);
    } else if (m_LowLightLevel) {
        configureLowLight (m_captureFrameConfig);

        //Added reset capture type as a last batch for back-end to restore settings.
        int32_t batch_count = m_captureFrameConfig.num_batch;
        m_captureFrameConfig.configs[batch_count].type = CAM_CAPTURE_RESET;
        m_captureFrameConfig.configs[batch_count].num_frames = 0;
        m_captureFrameConfig.num_batch++;
    } else if (getManualCaptureMode() >= CAM_MANUAL_CAPTURE_TYPE_2){
        rc = configureManualCapture (m_captureFrameConfig);
        //Added reset capture type as a last batch for back-end to restore settings.
        int32_t batch_count = m_captureFrameConfig.num_batch;
        m_captureFrameConfig.configs[batch_count].type = CAM_CAPTURE_RESET;
        m_captureFrameConfig.configs[batch_count].num_frames = 0;
        m_captureFrameConfig.num_batch++;
    }

    rc = ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_CAPTURE_FRAME_CONFIG,
            (cam_capture_frame_config_t)m_captureFrameConfig);
    if (rc != NO_ERROR) {
        rc = BAD_VALUE;
        LOGE("Failed to set capture settings");
        return rc;
    }

    if (commitSettings) {
        rc = commitSetBatch();
        if (rc != NO_ERROR) {
            LOGE("Failed to commit parameters");
            return rc;
        }
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : resetFrameCapture
 *
 * DESCRIPTION: reset special captures settings(FLASH/HDR etc)
 *
 * PARAMETERS :
 *   @commitSettings : flag to enable or disable commit this this settings
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::resetFrameCapture(bool commitSettings)
{
    int32_t rc = NO_ERROR;
    memset(&m_captureFrameConfig, 0, sizeof(cam_capture_frame_config_t));

    if (commitSettings) {
        if(initBatchUpdate(m_pParamBuf) < 0 ) {
            LOGE("Failed to initialize group update table");
            return BAD_TYPE;
        }
    }

    if (isHDREnabled() || isAEBracketEnabled()) {
        rc = setToneMapMode(true, true);
        if (rc != NO_ERROR) {
            LOGH("Failed to enable tone map during HDR/AEBracketing");
        }
        rc = stopAEBracket();
    } else if ((isChromaFlashEnabled()) || (mFlashValue != CAM_FLASH_MODE_OFF)
            || (getLowLightLevel() != CAM_LOW_LIGHT_OFF)) {
        rc = setToneMapMode(true, false);
        if (rc != NO_ERROR) {
            LOGH("Failed to enable tone map during chroma flash");
        }

        rc = setCDSMode(mCds_mode, false);
        if (rc != NO_ERROR) {
            LOGE("Failed to configure csd mode");
            return rc;
        }
    }

    rc = ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_CAPTURE_FRAME_CONFIG,
            (cam_capture_frame_config_t)m_captureFrameConfig);
    if (rc != NO_ERROR) {
        rc = BAD_VALUE;
        LOGE("Failed to set capture settings");
        return rc;
    }

    if (commitSettings) {
        rc = commitSetBatch();
        if (rc != NO_ERROR) {
            LOGE("Failed to commit parameters");
            return rc;
        }
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : setAecLock
 *
 * DESCRIPTION: set AEC lock value
 *
 * PARAMETERS :
 *   @aecLockStr : AEC lock value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAecLock(const char *aecLockStr)
{
    if (aecLockStr != NULL) {
        int32_t value = lookupAttr(TRUE_FALSE_MODES_MAP, PARAM_MAP_SIZE(TRUE_FALSE_MODES_MAP),
                aecLockStr);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting AECLock value %s", aecLockStr);
            updateParamEntry(KEY_AUTO_EXPOSURE_LOCK, aecLockStr);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
                    CAM_INTF_PARM_AEC_LOCK, (uint32_t)value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid AECLock value: %s",
        (aecLockStr == NULL) ? "NULL" : aecLockStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setAwbLock
 *
 * DESCRIPTION: set AWB lock value
 *
 * PARAMETERS :
 *   @awbLockStr : AWB lock value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAwbLock(const char *awbLockStr)
{
    if (awbLockStr != NULL) {
        int32_t value = lookupAttr(TRUE_FALSE_MODES_MAP, PARAM_MAP_SIZE(TRUE_FALSE_MODES_MAP),
                awbLockStr);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting AWBLock value %s", awbLockStr);
            updateParamEntry(KEY_AUTO_WHITEBALANCE_LOCK, awbLockStr);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
                    CAM_INTF_PARM_AWB_LOCK, (uint32_t)value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid AWBLock value: %s", (awbLockStr == NULL) ? "NULL" : awbLockStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setMCEValue
 *
 * DESCRIPTION: set memory color enhancement value
 *
 * PARAMETERS :
 *   @mceStr : MCE value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setMCEValue(const char *mceStr)
{
    if (mceStr != NULL) {
        int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), mceStr);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting AWBLock value %s", mceStr);
            updateParamEntry(KEY_QC_MEMORY_COLOR_ENHANCEMENT, mceStr);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_MCE, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid MCE value: %s", (mceStr == NULL) ? "NULL" : mceStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setTintlessValue
 *
 * DESCRIPTION: enable/disable tintless from user setting
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setTintlessValue(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_TINTLESS_ENABLE);
    const char *prev_str = get(KEY_QC_TINTLESS_ENABLE);
    char prop[PROPERTY_VALUE_MAX];

    memset(prop, 0, sizeof(prop));
    property_get("persist.camera.tintless", prop, VALUE_ENABLE);
    if (str != NULL) {
        if (prev_str == NULL ||
            strcmp(str, prev_str) != 0) {
            return setTintlessValue(str);
        }
    } else {
        if (prev_str == NULL ||
            strcmp(prev_str, prop) != 0 ) {
            setTintlessValue(prop);
        }
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setTintless
 *
 * DESCRIPTION: set tintless mode
 *
 * PARAMETERS :
 *   @enable : 1 = enable, 0 = disable
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
void QCameraParameters::setTintless(bool enable)
{
    if (enable) {
        setTintlessValue(VALUE_ENABLE);
    } else {
        setTintlessValue(VALUE_DISABLE);
    }
}

/*===========================================================================
 * FUNCTION   : setTintlessValue
 *
 * DESCRIPTION: set tintless value
 *
 * PARAMETERS :
 *   @tintStr : Tintless value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setTintlessValue(const char *tintStr)
{
    if (tintStr != NULL) {
        int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), tintStr);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting Tintless value %s", tintStr);
            updateParamEntry(KEY_QC_TINTLESS_ENABLE, tintStr);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_TINTLESS, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid Tintless value: %s", (tintStr == NULL) ? "NULL" : tintStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setCDSMode
 *
 * DESCRIPTION: Set CDS mode
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setCDSMode(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_CDS_MODE);
    const char *prev_str = get(KEY_QC_CDS_MODE);
    const char *video_str = params.get(KEY_QC_VIDEO_CDS_MODE);
    const char *video_prev_str = get(KEY_QC_VIDEO_CDS_MODE);
    int32_t rc = NO_ERROR;

    if (m_bRecordingHint_new == true) {
        if (video_str) {
            if ((video_prev_str == NULL) || (strcmp(video_str, video_prev_str) != 0)) {
                int32_t cds_mode = lookupAttr(CDS_MODES_MAP, PARAM_MAP_SIZE(CDS_MODES_MAP),
                        video_str);
                if (cds_mode != NAME_NOT_FOUND) {
                    updateParamEntry(KEY_QC_VIDEO_CDS_MODE, video_str);
                    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_CDS_MODE, cds_mode)) {
                        LOGE("Failed CDS MODE to update table");
                        rc = BAD_VALUE;
                    } else {
                        LOGD("Set CDS in video mode = %d", cds_mode);
                        mCds_mode = cds_mode;
                        m_bNeedRestart = true;
                    }
                } else {
                    LOGE("Invalid argument for video CDS MODE %d",  cds_mode);
                    rc = BAD_VALUE;
                }
            }
        } else {
            char video_prop[PROPERTY_VALUE_MAX];
            memset(video_prop, 0, sizeof(video_prop));
            property_get("persist.camera.video.CDS", video_prop, CDS_MODE_ON);
            int32_t cds_mode = lookupAttr(CDS_MODES_MAP, PARAM_MAP_SIZE(CDS_MODES_MAP),
                    video_prop);
            if (cds_mode != NAME_NOT_FOUND) {
                updateParamEntry(KEY_QC_VIDEO_CDS_MODE, video_prop);
                if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_CDS_MODE, cds_mode)) {
                    LOGE("Failed CDS MODE to update table");
                    rc = BAD_VALUE;
                } else {
                    LOGD("Set CDS in video mode from setprop = %d", cds_mode);
                    mCds_mode = cds_mode;
                }
            } else {
                LOGE("Invalid prop for video CDS MODE %d",  cds_mode);
                rc = BAD_VALUE;
            }
        }
    } else {
        if (str) {
            if ((prev_str == NULL) || (strcmp(str, prev_str) != 0)) {
                int32_t cds_mode = lookupAttr(CDS_MODES_MAP, PARAM_MAP_SIZE(CDS_MODES_MAP),
                        str);
                if (cds_mode != NAME_NOT_FOUND) {
                    updateParamEntry(KEY_QC_CDS_MODE, str);
                    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_CDS_MODE, cds_mode)) {
                        LOGE("Failed CDS MODE to update table");
                        rc = BAD_VALUE;
                    } else {
                        LOGD("Set CDS in capture mode = %d", cds_mode);
                        mCds_mode = cds_mode;
                        m_bNeedRestart = true;
                    }
                } else {
                    LOGE("Invalid argument for snapshot CDS MODE %d",  cds_mode);
                    rc = BAD_VALUE;
                }
            }
        } else {
            char prop[PROPERTY_VALUE_MAX];
            memset(prop, 0, sizeof(prop));
            property_get("persist.camera.CDS", prop, CDS_MODE_ON);
            int32_t cds_mode = lookupAttr(CDS_MODES_MAP, PARAM_MAP_SIZE(CDS_MODES_MAP),
                    prop);
            if (cds_mode != NAME_NOT_FOUND) {
                updateParamEntry(KEY_QC_CDS_MODE, prop);
                if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_CDS_MODE, cds_mode)) {
                    LOGE("Failed CDS MODE to update table");
                    rc = BAD_VALUE;
                } else {
                    LOGD("Set CDS in snapshot mode from setprop = %d", cds_mode);
                    mCds_mode = cds_mode;
                }
            } else {
                LOGE("Invalid prop for snapshot CDS MODE %d",  cds_mode);
                rc = BAD_VALUE;
            }
        }
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setInitialExposureIndex
 *
 * DESCRIPTION: Set initial exposure index value
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setInitialExposureIndex(const QCameraParameters& params)
{
    int32_t rc = NO_ERROR;
    int value = -1;
    const char *str = params.get(KEY_QC_INITIAL_EXPOSURE_INDEX);
    const char *prev_str = get(KEY_QC_INITIAL_EXPOSURE_INDEX);
    if (str) {
        if ((prev_str == NULL) || (strcmp(str, prev_str) != 0)) {
            value = atoi(str);
            LOGD("Set initial exposure index value from param = %d", value);
            if (value >= 0) {
                updateParamEntry(KEY_QC_INITIAL_EXPOSURE_INDEX, str);
            }
        }
    } else {
        char prop[PROPERTY_VALUE_MAX];
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.initial.exp.val", prop, "");
        if ((strlen(prop) > 0) &&
                ( (prev_str == NULL) || (strcmp(prop, prev_str) != 0))) {
            value = atoi(prop);
            LOGD("Set initial exposure index value from setprop = %d", value);
            if (value >= 0) {
                updateParamEntry(KEY_QC_INITIAL_EXPOSURE_INDEX, prop);
            }
        }
    }

    if (value >= 0) {
        if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
                CAM_INTF_PARM_INITIAL_EXPOSURE_INDEX, (uint32_t)value)) {
            LOGE("Failed to update initial exposure index value");
            rc = BAD_VALUE;
        }
    } else {
        LOGD("Invalid value for initial exposure index value %d", value);
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setInstantCapture
 *
 * DESCRIPTION: Set Instant Capture related params
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setInstantCapture(const QCameraParameters& params)
{
    int32_t rc = NO_ERROR;
    int value = -1;
    // Check for instant capture, this will enable instant AEC as well.
    // This param will trigger the instant AEC param to backend
    // And also will be useful for instant capture.
    const char *str = params.get(KEY_QC_INSTANT_CAPTURE);
    const char *prev_str = get(KEY_QC_INSTANT_CAPTURE);
    if (str) {
        if ((prev_str == NULL) || (strcmp(str, prev_str) != 0)) {
            value = lookupAttr(INSTANT_CAPTURE_MODES_MAP,
                    PARAM_MAP_SIZE(INSTANT_CAPTURE_MODES_MAP), str);
            LOGD("Set instant Capture from param = %d", value);
            if(value != NAME_NOT_FOUND) {
                updateParamEntry(KEY_QC_INSTANT_CAPTURE, str);
            }
        }
    } else {
        char prop[PROPERTY_VALUE_MAX];
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.instant.capture", prop, KEY_QC_INSTANT_CAPTURE_DISABLE);
        if ((prev_str == NULL) || (strcmp(prop, prev_str) != 0)) {
            value = lookupAttr(INSTANT_CAPTURE_MODES_MAP,
                    PARAM_MAP_SIZE(INSTANT_CAPTURE_MODES_MAP), prop);
            LOGD("Set instant capture from setprop = %d", value);
            if (value != NAME_NOT_FOUND) {
                updateParamEntry(KEY_QC_INSTANT_CAPTURE, prop);
            }
        }
    }

    // Set instant AEC param to the backend for either instant capture or instant AEC
    // 0 - disbale (normal AEC)
    // 1 - Aggressive AEC (algo used in backend)
    // 2 - Fast AEC (algo used in backend)
    if (value != NAME_NOT_FOUND && value != -1) {
        m_bInstantCapture = (value > 0)? true : false;
        setInstantAEC((uint8_t)value, false);
    }


    // get frame aec bound value from setprop.
    // This value indicates the number of frames, camera interface
    // will wait for getting the instant capture frame.
    // Default value set to 7.
    // This value also indicates the number of frames, that HAL
    // will not display and will not send preview frames to app
    // This will be applicable only if instant capture is set.
    if (m_bInstantCapture) {
        char prop[PROPERTY_VALUE_MAX];
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.ae.capture.bound", prop, "7");
        int32_t frame_bound = atoi(prop);
        if (frame_bound >= 0) {
            mAecFrameBound = (uint8_t)frame_bound;
        } else {
            LOGE("Invalid prop for aec frame bound %d", frame_bound);
            rc = BAD_VALUE;
        }
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : setInstantAEC
 *
 * DESCRIPTION: Set Instant AEC related params
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setInstantAEC(const QCameraParameters& params)
{
    int32_t rc = NO_ERROR;
    int value = -1;

    // Check for instant AEC only when instant capture is not enabled.
    // Instant capture already takes care of the instant AEC as well.
    if (!m_bInstantCapture) {
        // Check for instant AEC. Instant AEC will only enable fast AEC.
        // It will not enable instant capture.
        // This param will trigger the instant AEC param to backend
        const char *str = params.get(KEY_QC_INSTANT_AEC);
        const char *prev_str = get(KEY_QC_INSTANT_AEC);
        if (str) {
            if ((prev_str == NULL) || (strcmp(str, prev_str) != 0)) {
                value = lookupAttr(INSTANT_AEC_MODES_MAP,
                        PARAM_MAP_SIZE(INSTANT_AEC_MODES_MAP), str);
                LOGD("Set instant AEC from param = %d", value);
            }
        } else {
            char prop[PROPERTY_VALUE_MAX];
            memset(prop, 0, sizeof(prop));
            property_get("persist.camera.instant.aec", prop, KEY_QC_INSTANT_AEC_DISABLE);
            if ((prev_str == NULL) || (strcmp(prop, prev_str) != 0)) {
                value = lookupAttr(INSTANT_AEC_MODES_MAP,
                        PARAM_MAP_SIZE(INSTANT_AEC_MODES_MAP), prop);
                LOGD("Set instant AEC from setprop = %d", value);
            }
        }

        // Set instant AEC param to the backend for either instant capture or instant AEC
        // 0 - disbale (normal AEC)
        // 1 - Aggressive AEC (algo used in backend)
        // 2 - Fast AEC (algo used in backend)
        if (value != NAME_NOT_FOUND && value != -1) {
            setInstantAEC((uint8_t)value, false);
        }

    }

    // get frame aec preview skip count from setprop.
    // This value indicates the number of frames, that HAL
    // will not display and will not send preview frames to app
    // Default value set to 7.
    // This will be applicable only if instant aec is set.
    if (m_bInstantAEC) {
        char prop[PROPERTY_VALUE_MAX];
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.ae.instant.bound", prop, "7");
        int32_t aec_frame_skip_cnt = atoi(prop);
        if (aec_frame_skip_cnt >= 0) {
            mAecSkipDisplayFrameBound = (uint8_t)aec_frame_skip_cnt;
        } else {
            LOGE("Invalid prop for aec frame bound %d", aec_frame_skip_cnt);
            rc = BAD_VALUE;
        }
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : setDISValue
 *
 * DESCRIPTION: set DIS value
 *
 * PARAMETERS :
 *   @disStr : DIS value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setDISValue(const char *disStr)
{
    if (disStr != NULL) {
        int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), disStr);
        if (value != NAME_NOT_FOUND) {
            //For some IS types (like EIS 2.0), when DIS value is changed, we need to restart
            //preview because of topology change in backend. But, for now, restart preview
            //for all IS types.
            m_bNeedRestart = true;
            LOGH("Setting DIS value %s", disStr);
            updateParamEntry(KEY_QC_DIS, disStr);
            if (!(strcmp(disStr,"enable"))) {
                m_bDISEnabled = true;
            } else {
                m_bDISEnabled = false;
            }
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_DIS_ENABLE, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid DIS value: %s", (disStr == NULL) ? "NULL" : disStr);
    m_bDISEnabled = false;
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : updateOisValue
 *
 * DESCRIPTION: update OIS value
 *
 * PARAMETERS :
 *   @oisValue : OIS value TRUE/FALSE
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateOisValue(bool oisValue)
{
    uint8_t enable = 0;
    int32_t rc = NO_ERROR;

    // Check for OIS disable
    char ois_prop[PROPERTY_VALUE_MAX];
    memset(ois_prop, 0, sizeof(ois_prop));
    property_get("persist.camera.ois.disable", ois_prop, "0");
    uint8_t ois_disable = (uint8_t)atoi(ois_prop);

    //Enable OIS if it is camera mode or Camcoder 4K mode
    if (!m_bRecordingHint || (is4k2kVideoResolution() && m_bRecordingHint)) {
        enable = 1;
        LOGH("Valid OIS mode!! ");
    }
    // Disable OIS if setprop is set
    if (ois_disable || !oisValue) {
        //Disable OIS
        enable = 0;
        LOGH("Disable OIS mode!! ois_disable(%d) oisValue(%d)",
                 ois_disable, oisValue);

    }
    m_bOISEnabled = enable;
    if (m_bOISEnabled) {
        updateParamEntry(KEY_QC_OIS, VALUE_ENABLE);
    } else {
        updateParamEntry(KEY_QC_OIS, VALUE_DISABLE);
    }

    if (initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    LOGH("Sending OIS mode (%d)", enable);
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_META_LENS_OPT_STAB_MODE, enable)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to parameter changes");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setHighFrameRate
 *
 * DESCRIPTION: set high frame rate
 *
 * PARAMETERS :
 *   @hfrMode : HFR mode
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setHighFrameRate(const int32_t hfrMode)
{
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_HFR, hfrMode)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setLensShadeValue
 *
 * DESCRIPTION: set lens shade value
 *
 * PARAMETERS :
 *   @lensSahdeStr : lens shade value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setLensShadeValue(const char *lensShadeStr)
{
    if (lensShadeStr != NULL) {
        int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), lensShadeStr);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting LensShade value %s", lensShadeStr);
            updateParamEntry(KEY_QC_LENSSHADE, lensShadeStr);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ROLLOFF, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid LensShade value: %s",
          (lensShadeStr == NULL) ? "NULL" : lensShadeStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setExposureCompensation
 *
 * DESCRIPTION: set exposure compensation value
 *
 * PARAMETERS :
 *   @expComp : exposure compensation value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setExposureCompensation(int expComp)
{
    char val[16];
    snprintf(val, sizeof(val), "%d", expComp);
    updateParamEntry(KEY_EXPOSURE_COMPENSATION, val);

    // Don't need to pass step as part of setParameter because
    // camera daemon is already aware of it.
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_EXPOSURE_COMPENSATION, expComp)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setWhiteBalance
 *
 * DESCRIPTION: set white balance mode
 *
 * PARAMETERS :
 *   @wbStr   : white balance mode value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setWhiteBalance(const char *wbStr)
{
    if (wbStr != NULL) {
        int32_t value = lookupAttr(WHITE_BALANCE_MODES_MAP,
                PARAM_MAP_SIZE(WHITE_BALANCE_MODES_MAP), wbStr);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting WhiteBalance value %s", wbStr);
            updateParamEntry(KEY_WHITE_BALANCE, wbStr);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_WHITE_BALANCE, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid WhiteBalance value: %s", (wbStr == NULL) ? "NULL" : wbStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setWBManualCCT
 *
 * DESCRIPTION: set setWBManualCCT time
 *
 * PARAMETERS :
 *   @cctStr : string of wb cct, range (2000, 8000) in K.
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t  QCameraParameters::setWBManualCCT(const char *cctStr)
{
    if (cctStr != NULL) {
        int32_t cctVal = atoi(cctStr);
        int32_t minCct = m_pCapability->min_wb_cct; /* 2000K */
        int32_t maxCct = m_pCapability->max_wb_cct; /* 8000K */

        if (cctVal >= minCct && cctVal <= maxCct) {
            LOGH(", cct value: %d", cctVal);
            updateParamEntry(KEY_QC_WB_MANUAL_CCT, cctStr);
            cam_manual_wb_parm_t manual_wb;
            manual_wb.type = CAM_MANUAL_WB_MODE_CCT;
            manual_wb.cct = cctVal;
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_WB_MANUAL, manual_wb)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }

    LOGE("Invalid cct, value: %s",
            (cctStr == NULL) ? "NULL" : cctStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : updateAWBParams
 *
 * DESCRIPTION: update CCT parameters key
 *
 * PARAMETERS :
 *   @awb_params : WB parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateAWBParams(cam_awb_params_t &awb_params)
{
    //check and update CCT
    int32_t prev_cct = getInt(KEY_QC_WB_MANUAL_CCT);
    if (prev_cct != awb_params.cct_value) {
        LOGD("update current cct value. old:%d, now:%d",
                prev_cct, awb_params.cct_value);
        set(KEY_QC_WB_MANUAL_CCT, awb_params.cct_value);
    }

    //check and update WB gains
    const char *prev_gains = get(KEY_QC_MANUAL_WB_GAINS);
    char gainStr[30];
    snprintf(gainStr, sizeof(gainStr), "%f,%f,%f", awb_params.rgb_gains.r_gain,
        awb_params.rgb_gains.g_gain, awb_params.rgb_gains.b_gain);

    if (prev_gains == NULL || strcmp(prev_gains, gainStr)) {
        set(KEY_QC_MANUAL_WB_GAINS, gainStr);
        LOGD("update currernt RGB gains: old %s new %s", prev_gains, gainStr);
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : parseGains
 *
 * DESCRIPTION: parse WB gains
 *
 * PARAMETERS :
 *   @gainStr : WB result string
 *   @r_gain  : WB red gain
 *   @g_gain  : WB green gain
 *   @b_gain  : WB blue gain
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::parseGains(const char *gainStr, double &r_gain,
                                          double &g_gain, double &b_gain)
{
    int32_t rc = NO_ERROR;
    char *saveptr = NULL;
    size_t gains_size = strlen(gainStr) + 1;
    char* gains = (char*) calloc(1, gains_size);
    if (NULL == gains) {
        LOGE("No memory for gains");
        return NO_MEMORY;
    }
    strlcpy(gains, gainStr, gains_size);
    char *token = strtok_r(gains, ",", &saveptr);

    if (NULL != token) {
        r_gain = (float) atof(token);
        token = strtok_r(NULL, ",", &saveptr);
    }

    if (NULL != token) {
        g_gain = (float) atof(token);
        token = strtok_r(NULL, ",", &saveptr);
    }

    if (NULL != token) {
        b_gain = (float) atof(token);
    } else {
        LOGE("Malformed string for gains");
        rc = BAD_VALUE;
    }

    free(gains);
    return rc;
}

/*===========================================================================
 * FUNCTION   : setManualWBGains
 *
 * DESCRIPTION: set manual wb gains for r,g,b
 *
 * PARAMETERS :
 *   @cctStr : string of wb gains, range (1.0, 4.0).
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setManualWBGains(const char *gainStr)
{
    int32_t rc = NO_ERROR;
    if (gainStr != NULL) {
        double r_gain,g_gain,b_gain;
        rc = parseGains(gainStr, r_gain, g_gain, b_gain);
        if (rc != NO_ERROR) {
            return rc;
        }

        double minGain = m_pCapability->min_wb_gain;
        double maxGain = m_pCapability->max_wb_gain;

        if (r_gain >= minGain && r_gain <= maxGain &&
            g_gain >= minGain && g_gain <= maxGain &&
            b_gain >= minGain && b_gain <= maxGain) {
            LOGH(", setting rgb gains: r = %lf g = %lf b = %lf",
                     r_gain, g_gain, b_gain);
            updateParamEntry(KEY_QC_MANUAL_WB_GAINS, gainStr);
            cam_manual_wb_parm_t manual_wb;
            manual_wb.type = CAM_MANUAL_WB_MODE_GAIN;
            manual_wb.gains.r_gain = r_gain;
            manual_wb.gains.g_gain = g_gain;
            manual_wb.gains.b_gain = b_gain;
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_WB_MANUAL, manual_wb)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }

    LOGH("Invalid manual wb gains: %s",
          (gainStr == NULL) ? "NULL" : gainStr);
    return BAD_VALUE;
}

int QCameraParameters::getAutoFlickerMode()
{
    /* Enable Advanced Auto Antibanding where we can set
       any of the following option
       ie. CAM_ANTIBANDING_MODE_AUTO
           CAM_ANTIBANDING_MODE_AUTO_50HZ
           CAM_ANTIBANDING_MODE_AUTO_60HZ
      Currently setting it to default    */
    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));
    property_get("persist.camera.set.afd", prop, "3");
    return atoi(prop);
}

/*===========================================================================
 * FUNCTION   : setAntibanding
 *
 * DESCRIPTION: set antibanding value
 *
 * PARAMETERS :
 *   @antiBandingStr : antibanding value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAntibanding(const char *antiBandingStr)
{
    if (antiBandingStr != NULL) {
        int32_t value = lookupAttr(ANTIBANDING_MODES_MAP, PARAM_MAP_SIZE(ANTIBANDING_MODES_MAP),
                antiBandingStr);
        if (value != NAME_NOT_FOUND) {
            LOGH("Setting AntiBanding value %s", antiBandingStr);
            updateParamEntry(KEY_ANTIBANDING, antiBandingStr);
            if(value == CAM_ANTIBANDING_MODE_AUTO) {
               value = getAutoFlickerMode();
            }
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
                    CAM_INTF_PARM_ANTIBANDING, (uint32_t)value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid AntiBanding value: %s",
          (antiBandingStr == NULL) ? "NULL" : antiBandingStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setFocusAreas
 *
 * DESCRIPTION: set focus areas
 *
 * PARAMETERS :
 *   @focusAreasStr : focus areas value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFocusAreas(const char *focusAreasStr)
{
    if (m_pCapability->max_num_focus_areas == 0 ||
        focusAreasStr == NULL) {
        LOGD("Parameter string is null");
        return NO_ERROR;
    }

    cam_area_t *areas = (cam_area_t *)malloc(sizeof(cam_area_t) * m_pCapability->max_num_focus_areas);
    if (NULL == areas) {
        LOGE("No memory for areas");
        return NO_MEMORY;
    }
    memset(areas, 0, sizeof(cam_area_t) * m_pCapability->max_num_focus_areas);
    int num_areas_found = 0;
    if (parseCameraAreaString(focusAreasStr,
                              m_pCapability->max_num_focus_areas,
                              areas,
                              num_areas_found) != NO_ERROR) {
        LOGE("Failed to parse the string: %s", focusAreasStr);
        free(areas);
        return BAD_VALUE;
    }

    if (validateCameraAreas(areas, num_areas_found) == false) {
        LOGE("invalid areas specified : %s", focusAreasStr);
        free(areas);
        return BAD_VALUE;
    }

    updateParamEntry(KEY_FOCUS_AREAS, focusAreasStr);

    //for special area string (0, 0, 0, 0, 0), set the num_areas_found to 0,
    //so no action is takenby the lower layer
    if (num_areas_found == 1 &&
        areas[0].rect.left == 0 &&
        areas[0].rect.top == 0 &&
        areas[0].rect.width == 0 &&
        areas[0].rect.height == 0 &&
        areas[0].weight == 0) {
        num_areas_found = 0;
    }

    int previewWidth, previewHeight;
    getPreviewSize(&previewWidth, &previewHeight);
    cam_roi_info_t af_roi_value;
    memset(&af_roi_value, 0, sizeof(cam_roi_info_t));
    af_roi_value.num_roi = (uint8_t)num_areas_found;
    for (int i = 0; i < num_areas_found; i++) {
        LOGH("FocusArea[%d] = (%d, %d, %d, %d)",
               i, (areas[i].rect.top), (areas[i].rect.left),
              (areas[i].rect.width), (areas[i].rect.height));

        // Transform the coords from (-1000, 1000)
        // to (0, previewWidth or previewHeight).
        af_roi_value.roi[i].left =
                (int32_t)(((double)areas[i].rect.left + 1000.0) *
                    ((double)previewWidth / 2000.0));
        af_roi_value.roi[i].top =
                (int32_t)(((double)areas[i].rect.top + 1000.0) *
                    ((double)previewHeight / 2000.0));
        af_roi_value.roi[i].width =
                (int32_t)((double)areas[i].rect.width *
                    (double)previewWidth / 2000.0);
        af_roi_value.roi[i].height =
                (int32_t)((double)areas[i].rect.height *
                    (double)previewHeight / 2000.0);
        af_roi_value.weight[i] = areas[i].weight;
    }
    free(areas);
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_AF_ROI, af_roi_value)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setMeteringAreas
 *
 * DESCRIPTION: set metering areas value
 *
 * PARAMETERS :
 *   @meteringAreasStr : metering areas value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setMeteringAreas(const char *meteringAreasStr)
{
    if (m_pCapability->max_num_metering_areas == 0 ||
        meteringAreasStr == NULL) {
        LOGD("Parameter string is null");
        return NO_ERROR;
    }

    cam_area_t *areas = (cam_area_t *)malloc(sizeof(cam_area_t) * m_pCapability->max_num_metering_areas);
    if (NULL == areas) {
        LOGE("No memory for areas");
        return NO_MEMORY;
    }
    memset(areas, 0, sizeof(cam_area_t) * m_pCapability->max_num_metering_areas);
    int num_areas_found = 0;
    if (parseCameraAreaString(meteringAreasStr,
                              m_pCapability->max_num_metering_areas,
                              areas,
                              num_areas_found) < 0) {
        LOGE("Failed to parse the string: %s", meteringAreasStr);
        free(areas);
        return BAD_VALUE;
    }

    if (validateCameraAreas(areas, num_areas_found) == false) {
        LOGE("invalid areas specified : %s", meteringAreasStr);
        free(areas);
        return BAD_VALUE;
    }

    updateParamEntry(KEY_METERING_AREAS, meteringAreasStr);

    //for special area string (0, 0, 0, 0, 0), set the num_areas_found to 0,
    //so no action is takenby the lower layer
    if (num_areas_found == 1 &&
        areas[0].rect.left == 0 &&
        areas[0].rect.top == 0 &&
        areas[0].rect.width == 0 &&
        areas[0].rect.height == 0 &&
        areas[0].weight == 0) {
        num_areas_found = 0;
    }
    cam_set_aec_roi_t aec_roi_value;
    int previewWidth, previewHeight;
    getPreviewSize(&previewWidth, &previewHeight);

    memset(&aec_roi_value, 0, sizeof(cam_set_aec_roi_t));
    if (num_areas_found > 0) {
        aec_roi_value.aec_roi_enable = CAM_AEC_ROI_ON;
        aec_roi_value.aec_roi_type = CAM_AEC_ROI_BY_COORDINATE;

        for (int i = 0; i < num_areas_found; i++) {
            LOGH("MeteringArea[%d] = (%d, %d, %d, %d)",
                   i, (areas[i].rect.top), (areas[i].rect.left),
                  (areas[i].rect.width), (areas[i].rect.height));

            // Transform the coords from (-1000, 1000) to
            // (0, previewWidth or previewHeight).
            aec_roi_value.cam_aec_roi_position.coordinate[i].x =
                    (uint32_t)((((double)areas[i].rect.left +
                        (double)areas[i].rect.width / 2.0) + 1000.0) *
                            (double)previewWidth / 2000.0);
            aec_roi_value.cam_aec_roi_position.coordinate[i].y =
                    (uint32_t)((((double)areas[i].rect.top +
                        (double)areas[i].rect.height / 2.0) + 1000.0) *
                            (double)previewHeight / 2000.0);
        }
    } else {
        aec_roi_value.aec_roi_enable = CAM_AEC_ROI_OFF;
    }
    free(areas);
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_AEC_ROI, aec_roi_value)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}


/*===========================================================================
 * FUNCTION   : isSupportedSensorHdrSize
 *
 * DESCRIPTION: Checks if the requested snapshot size is compatible with currently
 *              configured HDR mode, currently primary target for validation is
 *              zzhdr however this function can be extended in the future to vet
 *              all sensor based HDR configs
 *
 * PARAMETERS :
 *   @params  : CameraParameters object
 *
 * RETURN     : boolean type
 *              True  -- indicates supported config
 *              False -- indicated unsupported config should fallback to other
 *              available HDR modes
 *==========================================================================*/
bool QCameraParameters::isSupportedSensorHdrSize(const QCameraParameters& params)
{
    char value[PROPERTY_VALUE_MAX];
    memset(value, 0, sizeof(value));
    property_get("persist.camera.zzhdr.enable", value, "0");
    uint8_t zzhdr_enable = (uint8_t)atoi(value);

    if (zzhdr_enable) {

        int req_w, req_h;
        params.getPictureSize(&req_w, &req_h);

        // Check if requested w x h is in zzhdr supported list
        for (size_t i = 0; i< m_pCapability->zzhdr_sizes_tbl_cnt; ++i) {

            if (req_w == m_pCapability->zzhdr_sizes_tbl[i].width &&
                    req_h == m_pCapability->zzhdr_sizes_tbl[i].height) {
                LOGD("%s: Found match for %d x %d", __func__, req_w, req_h);
                return true;
            }
        }
        LOGH("%s: %d x %d is not supported for zzhdr mode", __func__, req_w, req_h);
        return false;
    }

    return true;
}

/*===========================================================================
 * FUNCTION   : setSceneMode
 *
 * DESCRIPTION: set scene mode
 *
 * PARAMETERS :
 *   @sceneModeStr : scene mode value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSceneMode(const char *sceneModeStr)
{
    if (sceneModeStr != NULL) {
        int32_t value = lookupAttr(SCENE_MODES_MAP, PARAM_MAP_SIZE(SCENE_MODES_MAP), sceneModeStr);
        if (value != NAME_NOT_FOUND) {
            LOGD("Setting SceneMode %s", sceneModeStr);
            updateParamEntry(KEY_SCENE_MODE, sceneModeStr);
            if (m_bSensorHDREnabled) {
              // Incase of HW HDR mode, we do not update the same as Best shot mode.
              LOGH("H/W HDR mode enabled. Do not set Best Shot Mode");
              return NO_ERROR;
            }
            if (m_bSceneSelection) {
                setSelectedScene((cam_scene_mode_type) value);
            }
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_BESTSHOT_MODE,
                    (uint32_t)value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid Secene Mode: %s",
           (sceneModeStr == NULL) ? "NULL" : sceneModeStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setSelectableZoneAf
 *
 * DESCRIPTION: set selectable zone AF algorithm
 *
 * PARAMETERS :
 *   @selZoneAFStr : selectable zone AF algorithm value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSelectableZoneAf(const char *selZoneAFStr)
{
    if (selZoneAFStr != NULL) {
        int32_t value = lookupAttr(FOCUS_ALGO_MAP, PARAM_MAP_SIZE(FOCUS_ALGO_MAP), selZoneAFStr);
        if (value != NAME_NOT_FOUND) {
            LOGD("Setting Selectable Zone AF value %s", selZoneAFStr);
            updateParamEntry(KEY_QC_SELECTABLE_ZONE_AF, selZoneAFStr);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_FOCUS_ALGO_TYPE, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid selectable zone af value: %s",
           (selZoneAFStr == NULL) ? "NULL" : selZoneAFStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : isAEBracketEnabled
 *
 * DESCRIPTION: checks if AE bracketing is enabled
 *
 * PARAMETERS :
 *
 * RETURN     : TRUE/FALSE
 *==========================================================================*/
bool QCameraParameters::isAEBracketEnabled()
{
    const char *str = get(KEY_QC_AE_BRACKET_HDR);
    if (str != NULL) {
        if (strcmp(str, AE_BRACKET_OFF) != 0) {
            return true;
        }
    }
    return false;
}

/*===========================================================================
 * FUNCTION   : setAEBracket
 *
 * DESCRIPTION: set AE bracket value
 *
 * PARAMETERS :
 *   @aecBracketStr : AE bracket value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAEBracket(const char *aecBracketStr)
{
    if (aecBracketStr == NULL) {
        LOGD("setAEBracket with NULL value");
        return NO_ERROR;
    }

    cam_exp_bracketing_t expBracket;
    memset(&expBracket, 0, sizeof(expBracket));

    int value = lookupAttr(BRACKETING_MODES_MAP, PARAM_MAP_SIZE(BRACKETING_MODES_MAP),
            aecBracketStr);
    switch (value) {
    case CAM_EXP_BRACKETING_ON:
        {
            LOGD("EXP_BRACKETING_ON");
            const char *str_val = get(KEY_QC_CAPTURE_BURST_EXPOSURE);
            if ((str_val != NULL) && (strlen(str_val)>0)) {
                expBracket.mode = CAM_EXP_BRACKETING_ON;
                m_bAeBracketingEnabled = true;
                strlcpy(expBracket.values, str_val, MAX_EXP_BRACKETING_LENGTH);
                LOGD("setting Exposure Bracketing value of %s",
                       expBracket.values);
            }
            else {
                /* Apps not set capture-burst-exposures, error case fall into bracketing off mode */
                LOGD("capture-burst-exposures not set, back to HDR OFF mode");
                m_bAeBracketingEnabled = false;
                expBracket.mode = CAM_EXP_BRACKETING_OFF;
            }
        }
        break;
    default:
        {
            m_bAeBracketingEnabled = false;
            LOGH(", EXP_BRACKETING_OFF");
            expBracket.mode = CAM_EXP_BRACKETING_OFF;
        }
        break;
    }

    // Cache client AE bracketing configuration
    memcpy(&m_AEBracketingClient, &expBracket, sizeof(cam_exp_bracketing_t));

    /* save the value*/
    updateParamEntry(KEY_QC_AE_BRACKET_HDR, aecBracketStr);
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : set3ALock
 *
 * DESCRIPTION: enable/disable 3A lock.
 *
 * PARAMETERS :
 *   @lock3A  : lock or unlock
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::set3ALock(bool lock3A)
{
    int32_t rc = NO_ERROR;
    LOGH("Setting Lock %d", lock3A);
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }
    uint32_t focus_mode = CAM_FOCUS_MODE_AUTO;
    if (lock3A) {
        if (isUbiFocusEnabled() || isUbiRefocus()) {
            //For Ubi focus move focus to infinity.
            focus_mode = CAM_FOCUS_MODE_INFINITY;
        } else if (isOptiZoomEnabled() || isStillMoreEnabled()) {
            //For optizoom and stillmore, set focus as fixed.
            focus_mode = CAM_FOCUS_MODE_FIXED;
        }
    } else {
        // retrieve previous focus value.
        const char *focus = get(KEY_FOCUS_MODE);
        int val = lookupAttr(FOCUS_MODES_MAP, PARAM_MAP_SIZE(FOCUS_MODES_MAP), focus);
        if (val != NAME_NOT_FOUND) {
            focus_mode = (uint32_t) val;
            LOGD("focus mode %s", focus);
        }
    }
    //Lock AWB
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_AWB_LOCK, (uint32_t)lock3A)) {
        return BAD_VALUE;
    }
    //Lock AEC
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_AEC_LOCK, (uint32_t)lock3A)) {
        return BAD_VALUE;
    }
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_FOCUS_MODE, focus_mode)) {
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to commit batch");
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : setAndCommitZoom
 *
 * DESCRIPTION: set zoom.
 *
 * PARAMETERS :
 *     @zoom_level : zoom level to set.
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAndCommitZoom(int zoom_level)
{
    LOGH("E");
    int32_t rc = NO_ERROR;
    if (initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ZOOM, zoom_level)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to set Flash value");
    }

    mZoomLevel = zoom_level;
    LOGH("X");

    return rc;
}

/*===========================================================================
 * FUNCTION   : isOptiZoomEnabled
 *
 * DESCRIPTION: checks whether optizoom is enabled
 *
 * PARAMETERS :
 *
 * RETURN     : true - enabled, false - disabled
 *
 *==========================================================================*/
bool QCameraParameters::isOptiZoomEnabled()
{
    if (m_bOptiZoomOn && (0 <= mParmZoomLevel)) {
        uint32_t zoom_level = (uint32_t) mParmZoomLevel;
        cam_opti_zoom_t *opti_zoom_settings_need =
                &(m_pCapability->opti_zoom_settings_need);
        uint32_t zoom_threshold = (uint32_t) opti_zoom_settings_need->zoom_threshold;
        LOGH("current zoom level =%u & zoom_threshold =%u",
                 zoom_level, zoom_threshold);

        if (zoom_level >= zoom_threshold) {
            return true;
        }
    }

    return false;
}

/*===========================================================================
 * FUNCTION   : setNoiseReductionMode
 *
 * DESCRIPTION: set noise reduction mode
 *
 * PARAMETERS :
 *   @noiseReductionModeStr : noise reduction mode
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setNoiseReductionMode(const char *noiseReductionModeStr)
{
    LOGH("noiseReductionModeStr = %s", noiseReductionModeStr);
    if (noiseReductionModeStr != NULL) {
        int value = lookupAttr(NOISE_REDUCTION_MODES_MAP, PARAM_MAP_SIZE(NOISE_REDUCTION_MODES_MAP),
                noiseReductionModeStr);
        if (value != NAME_NOT_FOUND) {
            m_bHighQualityNoiseReductionMode =
                    !strncmp(VALUE_HIGH_QUALITY, noiseReductionModeStr, strlen(VALUE_HIGH_QUALITY));
            updateParamEntry(KEY_QC_NOISE_REDUCTION_MODE, noiseReductionModeStr);
            return NO_ERROR;
        }
    }
    LOGE("Invalid noise reduction mode value: %s",
            (noiseReductionModeStr == NULL) ? "NULL" : noiseReductionModeStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : commitAFBracket
 *
 * DESCRIPTION: commit AF Bracket.
 *
 * PARAMETERS :
 *   @AFBracket : AF bracketing configuration
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::commitAFBracket(cam_af_bracketing_t afBracket)
{

    int32_t rc = NO_ERROR;
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_FOCUS_BRACKETING, afBracket)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to commit batch");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setAFBracket
 *
 * DESCRIPTION: set AF bracket value
 *
 * PARAMETERS :
 *   @afBracketStr : AF bracket value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAFBracket(const char *afBracketStr)
{
    LOGH("afBracketStr =%s",afBracketStr);

    if(afBracketStr != NULL) {
        int value = lookupAttr(AF_BRACKETING_MODES_MAP, PARAM_MAP_SIZE(AF_BRACKETING_MODES_MAP),
                afBracketStr);
        if (value != NAME_NOT_FOUND) {
            m_bAFBracketingOn = (value != 0);
            updateParamEntry(KEY_QC_AF_BRACKET, afBracketStr);

            return NO_ERROR;
        }
    }

    LOGE("Invalid af bracket value: %s",
        (afBracketStr == NULL) ? "NULL" : afBracketStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setReFocus
 *
 * DESCRIPTION: set refocus value
 *
 * PARAMETERS :
 *   @afBracketStr : refocus value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setReFocus(const char *reFocusStr)
{
    LOGH("reFocusStr =%s",reFocusStr);

    if (reFocusStr != NULL) {
        int value = lookupAttr(RE_FOCUS_MODES_MAP, PARAM_MAP_SIZE(RE_FOCUS_MODES_MAP),
                reFocusStr);
        if (value != NAME_NOT_FOUND) {
            m_bReFocusOn = (value != 0);
            updateParamEntry(KEY_QC_RE_FOCUS, reFocusStr);
            return NO_ERROR;
        }
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setChromaFlash
 *
 * DESCRIPTION: set chroma flash value
 *
 * PARAMETERS :
 *   @aecBracketStr : chroma flash value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setChromaFlash(const char *chromaFlashStr)
{
    LOGH("chromaFlashStr =%s",chromaFlashStr);
    if(chromaFlashStr != NULL) {
        int value = lookupAttr(CHROMA_FLASH_MODES_MAP, PARAM_MAP_SIZE(CHROMA_FLASH_MODES_MAP),
                chromaFlashStr);
        if(value != NAME_NOT_FOUND) {
            m_bChromaFlashOn = (value != 0);
            updateParamEntry(KEY_QC_CHROMA_FLASH, chromaFlashStr);

            return NO_ERROR;
        }
    }

    LOGE("Invalid chroma flash value: %s",
        (chromaFlashStr == NULL) ? "NULL" : chromaFlashStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setOptiZoom
 *
 * DESCRIPTION: set opti zoom value
 *
 * PARAMETERS :
 *   @optiZoomStr : opti zoom value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setOptiZoom(const char *optiZoomStr)
{
    LOGH("optiZoomStr =%s",optiZoomStr);
    if(optiZoomStr != NULL) {
        int value = lookupAttr(OPTI_ZOOM_MODES_MAP, PARAM_MAP_SIZE(OPTI_ZOOM_MODES_MAP),
                optiZoomStr);
        if(value != NAME_NOT_FOUND) {
            m_bOptiZoomOn = (value != 0);
            updateParamEntry(KEY_QC_OPTI_ZOOM, optiZoomStr);

            return NO_ERROR;
        }
    }
    LOGE("Invalid opti zoom value: %s",
        (optiZoomStr == NULL) ? "NULL" : optiZoomStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setTruePortrait
 *
 * DESCRIPTION: set true portrait value
 *
 * PARAMETERS :
 *   @optiZoomStr : true portrait value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setTruePortrait(const char *truePortraitStr)
{
    LOGH("truePortraitStr =%s", truePortraitStr);
    if (truePortraitStr != NULL) {
        int value = lookupAttr(TRUE_PORTRAIT_MODES_MAP,
                PARAM_MAP_SIZE(TRUE_PORTRAIT_MODES_MAP),
                truePortraitStr);
        if (value != NAME_NOT_FOUND) {
            m_bTruePortraitOn = (value != 0);
            updateParamEntry(KEY_QC_TRUE_PORTRAIT, truePortraitStr);
            setFaceDetection(m_bFaceDetectionOn, false);
            return NO_ERROR;
        }
    }
    LOGH("Invalid true portrait value: %s",
            (truePortraitStr == NULL) ? "NULL" : truePortraitStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setHDRMode
 *
 * DESCRIPTION: set hdr mode value
 *
 * PARAMETERS :
 *   @hdrModeStr : hdr mode value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setHDRMode(const char *hdrModeStr)
{
    LOGH("hdrModeStr =%s", hdrModeStr);
    if (hdrModeStr != NULL) {
        int value = lookupAttr(HDR_MODES_MAP, PARAM_MAP_SIZE(HDR_MODES_MAP), hdrModeStr);
        if (value != NAME_NOT_FOUND) {
            const char *str = get(KEY_SCENE_MODE);

            m_bHDRModeSensor = !strncmp(hdrModeStr, HDR_MODE_SENSOR, strlen(HDR_MODE_SENSOR));

            updateParamEntry(KEY_QC_HDR_MODE, hdrModeStr);

            // If hdr is already selected, need to deselect it in local cache
            // So the new hdr mode will be applied
            if (str && !strncmp(str, SCENE_MODE_HDR, strlen(SCENE_MODE_HDR))) {
                updateParamEntry(KEY_SCENE_MODE, SCENE_MODE_AUTO);
                m_bNeedRestart = true;
            }

            return NO_ERROR;
        }
    }
    LOGH("Invalid hdr mode value: %s",
            (hdrModeStr == NULL) ? "NULL" : hdrModeStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setSeeMore
 *
 * DESCRIPTION: set see more value
 *
 * PARAMETERS :
 *   @seeMoreStr : see more value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSeeMore(const char *seeMoreStr)
{
    int32_t rc = NO_ERROR;

    LOGH("seeMoreStr =%s", seeMoreStr);
    if (seeMoreStr != NULL) {
        int value = lookupAttr(ON_OFF_MODES_MAP,
                PARAM_MAP_SIZE(ON_OFF_MODES_MAP),
                seeMoreStr);
        if (value != NAME_NOT_FOUND) {
            m_bSeeMoreOn = (value != 0);

            // If SeeMore is enabled, enable StillMore for live snapshot
            // and disable tone map
            if (m_bSeeMoreOn) {
                m_bStillMoreOn = TRUE;
                if (!m_bLtmForSeeMoreEnabled) {
                    rc = setToneMapMode(false, false);
                }
                if (rc != NO_ERROR) {
                    LOGH("Failed to disable tone map during SeeMore");
                }
            } else {
                m_bStillMoreOn = FALSE;
                if (!m_bLtmForSeeMoreEnabled) {
                    rc = setToneMapMode(true, false);
                }
                if (rc != NO_ERROR) {
                    LOGH("Failed to enable tone map during SeeMore");
                }
            }
            updateParamEntry(KEY_QC_SEE_MORE, seeMoreStr);
            return NO_ERROR;
        }
    }
    LOGE("Invalid see more value: %s",
            (seeMoreStr == NULL) ? "NULL" : seeMoreStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setStillMore
 *
 * DESCRIPTION: set still more value
 *
 * PARAMETERS :
 *   @seeMoreStr : still more value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setStillMore(const char *stillMoreStr)
{
    LOGH("stillMoreStr =%s", stillMoreStr);
    if (stillMoreStr != NULL) {
        int value = lookupAttr(STILL_MORE_MODES_MAP, PARAM_MAP_SIZE(STILL_MORE_MODES_MAP),
                stillMoreStr);
        if (value != NAME_NOT_FOUND) {
            m_bStillMoreOn = (value != 0);
            updateParamEntry(KEY_QC_STILL_MORE, stillMoreStr);

            return NO_ERROR;
        }
    }
    LOGE("Invalid still more value: %s",
            (stillMoreStr == NULL) ? "NULL" : stillMoreStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setHDRNeed1x
 *
 * DESCRIPTION: set hdr need 1x value
 *
 * PARAMETERS :
 *   @hdrModeStr : hdr need 1x value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setHDRNeed1x(const char *hdrNeed1xStr)
{
    LOGH("hdrNeed1xStr =%s", hdrNeed1xStr);
    if (hdrNeed1xStr != NULL) {
        int value = lookupAttr(TRUE_FALSE_MODES_MAP, PARAM_MAP_SIZE(TRUE_FALSE_MODES_MAP),
                hdrNeed1xStr);
        if (value != NAME_NOT_FOUND) {
            updateParamEntry(KEY_QC_HDR_NEED_1X, hdrNeed1xStr);
            m_bHDR1xFrameEnabled = !strncmp(hdrNeed1xStr, VALUE_TRUE, strlen(VALUE_TRUE));
            m_bNeedRestart = true;

            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_HDR_NEED_1X,
                    m_bHDR1xFrameEnabled)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }

    LOGH("Invalid hdr need 1x value: %s",
            (hdrNeed1xStr == NULL) ? "NULL" : hdrNeed1xStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setAEBracketing
 *
 * DESCRIPTION: enables AE bracketing
 *
 * PARAMETERS :
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAEBracketing()
{
    int32_t rc = NO_ERROR;
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_HDR, m_AEBracketingClient)) {
        LOGE("Failed to update AE bracketing");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to configure AE bracketing");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setHDRAEBracket
 *
 * DESCRIPTION: enables AE bracketing for HDR
 *
 * PARAMETERS :
 *   @hdrBracket : HDR bracketing configuration
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setHDRAEBracket(cam_exp_bracketing_t hdrBracket)
{
    int32_t rc = NO_ERROR;
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_HDR, hdrBracket)) {
        LOGE("Failed to update table");
        return BAD_TYPE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to configure HDR bracketing");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setCacheVideoBuffers
 *
 * DESCRIPTION: set cache video buffers value
 *
 * PARAMETERS :
 *   @cacheVideoStr : cache video buffer value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setCacheVideoBuffers(const char *cacheVideoBufStr)
{
    if (cacheVideoBufStr != NULL) {
        int8_t cacheVideoBuf = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), cacheVideoBufStr);
        char prop[PROPERTY_VALUE_MAX];
        memset(prop, 0, sizeof(prop));
        property_get("persist.camera.mem.usecache", prop, "");
        if (strlen(prop) > 0) {
            cacheVideoBuf = atoi(prop);
        }
        if (cacheVideoBuf != NAME_NOT_FOUND) {
            const char *cacheStr = (strlen(prop)>0) ? prop : cacheVideoBufStr;
            LOGD("Setting video buffer %s",
                    (cacheVideoBuf == 0) ? "UnCached" : "Cached");
            return updateParamEntry(KEY_QC_CACHE_VIDEO_BUFFERS, cacheStr);
        }
        LOGE("Cache video buffers not set correctly");
    }
    return BAD_VALUE;
}


/*===========================================================================
 * FUNCTION   : setCacheVideoBuffers
 *
 * DESCRIPTION: Set buffers as Cache/Uncache Memory
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setCacheVideoBuffers(const QCameraParameters& params)
{
    const char *str = params.get(KEY_QC_CACHE_VIDEO_BUFFERS);;
    const char *prev_str = get(KEY_QC_CACHE_VIDEO_BUFFERS);

    if (str != NULL) {
        if (prev_str == NULL ||
                strcmp(str, prev_str) != 0) {
            return setCacheVideoBuffers(str);
        }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : restoreAEBracket
 *
 * DESCRIPTION: restores client AE bracketing configuration after HDR is done
 *
 * PARAMETERS :
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::stopAEBracket()
{
  cam_exp_bracketing_t bracketing;

  bracketing.mode = CAM_EXP_BRACKETING_OFF;

  return setHDRAEBracket(bracketing);
}

/*===========================================================================
 * FUNCTION   : updateFlash
 *
 * DESCRIPTION: restores client flash configuration or disables flash
 *
 * PARAMETERS :
 *   @commitSettings : flag indicating whether settings need to be commited
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateFlash(bool commitSettings)
{
    int32_t rc = NO_ERROR;
    int32_t value;

    if (commitSettings) {
      if(initBatchUpdate(m_pParamBuf) < 0 ) {
          LOGE("Failed to initialize group update table");
          return BAD_TYPE;
      }
    }

    if (isHDREnabled() || m_bAeBracketingEnabled || m_bAFBracketingOn ||
          m_bOptiZoomOn || m_bReFocusOn || m_LowLightLevel) {
        value = CAM_FLASH_MODE_OFF;
    } else if (m_bChromaFlashOn) {
        value = CAM_FLASH_MODE_ON;
    } else {
        value = mFlashValue;
    }

    if (value != mFlashDaemonValue) {
        LOGD("Setting Flash value %d", value);
        if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_LED_MODE, value)) {
            LOGE("Failed to set led mode");
            return BAD_VALUE;
        }
        mFlashDaemonValue = value;
    } else {
        rc = NO_ERROR;
    }

    if (commitSettings) {
        rc = commitSetBatch();
        if (rc != NO_ERROR) {
            LOGE("Failed to configure HDR bracketing");
            return rc;
        }
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setRedeyeReduction
 *
 * DESCRIPTION: set red eye reduction value
 *
 * PARAMETERS :
 *   @redeyeStr : red eye reduction value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setRedeyeReduction(const char *redeyeStr)
{
    if (redeyeStr != NULL) {
        int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), redeyeStr);
        if (value != NAME_NOT_FOUND) {
            LOGD("Setting RedEye Reduce value %s", redeyeStr);
            updateParamEntry(KEY_QC_REDEYE_REDUCTION, redeyeStr);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
                    CAM_INTF_PARM_REDEYE_REDUCTION, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid RedEye Reduce value: %s",
           (redeyeStr == NULL) ? "NULL" : redeyeStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : getDenoiseProcessPlate
 *
 * DESCRIPTION: query denoise process plate
 *
 * PARAMETERS : None
 *
 * RETURN     : NR process plate vlaue
 *==========================================================================*/
cam_denoise_process_type_t
        QCameraParameters::getDenoiseProcessPlate(cam_intf_parm_type_t type)
{
    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));
    cam_denoise_process_type_t processPlate = CAM_WAVELET_DENOISE_CBCR_ONLY;
    if (CAM_INTF_PARM_WAVELET_DENOISE == type) {
        property_get("persist.denoise.process.plates", prop, "");
    } else if (CAM_INTF_PARM_TEMPORAL_DENOISE == type) {
        property_get("persist.tnr.process.plates", prop, "");
    } else {
        LOGW("Type not supported");
        prop[0] = '\0';
    }
    if (strlen(prop) > 0) {
        switch(atoi(prop)) {
        case 0:
            processPlate = CAM_WAVELET_DENOISE_YCBCR_PLANE;
            break;
        case 1:
            processPlate = CAM_WAVELET_DENOISE_CBCR_ONLY;
            break;
        case 2:
            processPlate = CAM_WAVELET_DENOISE_STREAMLINE_YCBCR;
            break;
        case 3:
            processPlate = CAM_WAVELET_DENOISE_STREAMLINED_CBCR;
            break;
        default:
            processPlate = CAM_WAVELET_DENOISE_CBCR_ONLY;
            break;
        }
    }
    return processPlate;
}

/*===========================================================================
 * FUNCTION   : setWaveletDenoise
 *
 * DESCRIPTION: set wavelet denoise value
 *
 * PARAMETERS :
 *   @wnrStr : wavelet denoise value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setWaveletDenoise(const char *wnrStr)
{
    if ((m_pCapability->qcom_supported_feature_mask & CAM_QCOM_FEATURE_DENOISE2D) == 0){
        LOGH("WNR is not supported");
        return NO_ERROR;
    }

    if (wnrStr != NULL) {
        int value = lookupAttr(DENOISE_ON_OFF_MODES_MAP,
                PARAM_MAP_SIZE(DENOISE_ON_OFF_MODES_MAP), wnrStr);
        if (value != NAME_NOT_FOUND) {
            updateParamEntry(KEY_QC_DENOISE, wnrStr);

            cam_denoise_param_t temp;
            memset(&temp, 0, sizeof(temp));
            temp.denoise_enable = (uint8_t)value;
            m_bWNROn = (value != 0);
            if (m_bWNROn) {
                temp.process_plates = getDenoiseProcessPlate(CAM_INTF_PARM_WAVELET_DENOISE);
            }
            LOGD("Denoise enable=%d, plates=%d",
                   temp.denoise_enable, temp.process_plates);
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_WAVELET_DENOISE, temp)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid Denoise value: %s", (wnrStr == NULL) ? "NULL" : wnrStr);
    return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : setRdiMode
 *
 * DESCRIPTION: set rdi mode value
 *
 * PARAMETERS :
 *   @str     : rdi mode value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setRdiMode(const char *str)
{
    LOGD("RDI_DEBUG  rdi mode value: %s", str);

    if (str != NULL) {
        int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
                PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), str);
        if (value != NAME_NOT_FOUND) {
            updateParamEntry(KEY_QC_RDI_MODE, str);
            m_bRdiMode = (value == 0) ? false : true;
            if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_RDI_MODE, value)) {
                return BAD_VALUE;
            }
            return NO_ERROR;
        }
    }
    LOGE("Invalid rdi mode value: %s", (str == NULL) ? "NULL" : str);
    return BAD_VALUE;
}


/*===========================================================================
 * FUNCTION   : setSecureMode
 *
 * DESCRIPTION: set secure mode value
 *
 * PARAMETERS :
 *   @str     : secure mode value string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setSecureMode(const char *str)
{
  LOGD("Secure mode value: %s", str);

  if (str != NULL) {
    int32_t value = lookupAttr(ENABLE_DISABLE_MODES_MAP,
            PARAM_MAP_SIZE(ENABLE_DISABLE_MODES_MAP), str);
    if (value != NAME_NOT_FOUND) {
        updateParamEntry(KEY_QC_SECURE_MODE, str);
        m_bSecureMode = (value == 0)? false : true;
        return NO_ERROR;
    }
  }
  LOGE("Invalid Secure mode value: %s",
     (str == NULL) ? "NULL" : str);
  return BAD_VALUE;
}

/*===========================================================================
 * FUNCTION   : getStreamRotation
 *
 * DESCRIPTION: get stream rotation by its type
 *
 * PARAMETERS :
 *   @streamType        : stream type
 *   @featureConfig     : stream feature config structure
 *   @dim               : stream dimension
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getStreamRotation(cam_stream_type_t streamType,
                                            cam_pp_feature_config_t &featureConfig,
                                            cam_dimension_t &dim)
{
    int32_t ret = NO_ERROR;
    const char *str = get(KEY_QC_VIDEO_ROTATION);
    int rotationParam = lookupAttr(VIDEO_ROTATION_MODES_MAP,
            PARAM_MAP_SIZE(VIDEO_ROTATION_MODES_MAP), str);
    featureConfig.rotation = ROTATE_0;
    int swapDim = 0;
    switch (streamType) {
        case CAM_STREAM_TYPE_VIDEO:
            switch(rotationParam) {
                case 90:
                    featureConfig.feature_mask |= CAM_QCOM_FEATURE_ROTATION;
                    featureConfig.rotation = ROTATE_90;
                    swapDim = 1;
                    break;
                case 180:
                    featureConfig.feature_mask |= CAM_QCOM_FEATURE_ROTATION;
                    featureConfig.rotation = ROTATE_180;
                    break;
                case 270:
                    featureConfig.feature_mask |= CAM_QCOM_FEATURE_ROTATION;
                    featureConfig.rotation = ROTATE_270;
                    swapDim = 1;
                    break;
                default:
                    featureConfig.rotation = ROTATE_0;
            }
            break;
        case CAM_STREAM_TYPE_PREVIEW:
        case CAM_STREAM_TYPE_POSTVIEW:
        case CAM_STREAM_TYPE_SNAPSHOT:
        case CAM_STREAM_TYPE_RAW:
        case CAM_STREAM_TYPE_METADATA:
        case CAM_STREAM_TYPE_OFFLINE_PROC:
        case CAM_STREAM_TYPE_DEFAULT:
        default:
            break;
    }

    if (swapDim > 0) {
        int w = 0;
        w = dim.width;
        dim.width = dim.height;
        dim.height = w;
    }
    return ret;
}

/*===========================================================================
 * FUNCTION   : getStreamFormat
 *
 * DESCRIPTION: get stream format by its type
 *
 * PARAMETERS :
 *   @streamType : [input] stream type
 *   @format     : [output] stream format
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getStreamFormat(cam_stream_type_t streamType,
                                            cam_format_t &format)
{
    int32_t ret = NO_ERROR;
    format = CAM_FORMAT_MAX;
    switch (streamType) {
    case CAM_STREAM_TYPE_PREVIEW:
        if (!isUBWCEnabled()) {
#if VENUS_PRESENT
            cam_dimension_t preview;
            cam_dimension_t video;
            getStreamDimension(CAM_STREAM_TYPE_VIDEO , video);
            getStreamDimension(CAM_STREAM_TYPE_PREVIEW, preview);
            if (getRecordingHintValue() == true &&
                    video.width == preview.width &&
                    video.height == preview.height &&
                    mPreviewFormat == CAM_FORMAT_YUV_420_NV21) {
                format = CAM_FORMAT_YUV_420_NV21_VENUS;
            } else
#endif
            format = mPreviewFormat;
        } else {
            format = mPreviewFormat;
        }
        break;
    case CAM_STREAM_TYPE_POSTVIEW:
    case CAM_STREAM_TYPE_CALLBACK:
        format = mAppPreviewFormat;
        break;
    case CAM_STREAM_TYPE_ANALYSIS:
        cam_analysis_info_t analysisInfo;
        cam_feature_mask_t featureMask;

        featureMask = 0;
        getStreamPpMask(CAM_STREAM_TYPE_ANALYSIS, featureMask);
        ret = getAnalysisInfo(
                ((getRecordingHintValue() == true) && fdModeInVideo()),
                FALSE,
                featureMask,
                &analysisInfo);
        if (ret != NO_ERROR) {
            LOGE("getAnalysisInfo failed, ret = %d", ret);
            return ret;
        }

        if (analysisInfo.hw_analysis_supported &&
                analysisInfo.analysis_format == CAM_FORMAT_Y_ONLY) {
            format = analysisInfo.analysis_format;
        } else {
            if (analysisInfo.hw_analysis_supported) {
                LOGW("Invalid analysis_format %d\n",
                        analysisInfo.analysis_format);
            }
            format = mAppPreviewFormat;
        }
        break;
    case CAM_STREAM_TYPE_SNAPSHOT:
        if ( mPictureFormat == CAM_FORMAT_YUV_422_NV16 ) {
            format = CAM_FORMAT_YUV_422_NV16;
        } else {
            char prop[PROPERTY_VALUE_MAX];
            int snapshotFormat;
            memset(prop, 0, sizeof(prop));
            property_get("persist.camera.snap.format", prop, "0");
            snapshotFormat = atoi(prop);
            if(snapshotFormat == 1) {
                format = CAM_FORMAT_YUV_422_NV61;
            } else {
                format = CAM_FORMAT_YUV_420_NV21;
            }
        }
        break;
    case CAM_STREAM_TYPE_VIDEO:
        if (isUBWCEnabled()) {
            char prop[PROPERTY_VALUE_MAX];
            int pFormat;
            memset(prop, 0, sizeof(prop));
            property_get("persist.camera.video.ubwc", prop, "1");
            pFormat = atoi(prop);
            if (pFormat == 1) {
                format = CAM_FORMAT_YUV_420_NV12_UBWC;
            } else {
                format = CAM_FORMAT_YUV_420_NV21_VENUS;
            }
        } else {
#if VENUS_PRESENT
            format = CAM_FORMAT_YUV_420_NV21_VENUS;
#else
            format = CAM_FORMAT_YUV_420_NV21;
#endif
        }
        break;
    case CAM_STREAM_TYPE_RAW:
        if ((isRdiMode()) || (getofflineRAW())) {
            format = m_pCapability->rdi_mode_stream_fmt;
        } else if (mPictureFormat >= CAM_FORMAT_YUV_RAW_8BIT_YUYV) {
            format = (cam_format_t)mPictureFormat;
        } else {
            char raw_format[PROPERTY_VALUE_MAX];
            int rawFormat;
            memset(raw_format, 0, sizeof(raw_format));
            /*Default value is CAM_FORMAT_BAYER_QCOM_RAW_10BPP_GBRG*/
            property_get("persist.camera.raw.format", raw_format, "17");
            rawFormat = atoi(raw_format);
            format = (cam_format_t)rawFormat;
            LOGH("Raw stream format %d bundled with snapshot",
                    format);
        }
        break;
    case CAM_STREAM_TYPE_METADATA:
    case CAM_STREAM_TYPE_OFFLINE_PROC:
    case CAM_STREAM_TYPE_DEFAULT:
    default:
        break;
    }

    LOGD("Stream type = %d Stream Format = %d", streamType, format);
    return ret;
}

/*===========================================================================
 * FUNCTION   : getFlipMode
 *
 * DESCRIPTION: get flip mode
 *
 * PARAMETERS :
 *   @cam_intf_parm_type_t : [input] stream type
 *
 * RETURN     : int type of flip mode
 *              0 - no filp
 *              1 - FLIP_H
 *              2 - FLIP_V
 *              3 - FLIP_H | FLIP_V
 *==========================================================================*/
int QCameraParameters::getFlipMode(cam_stream_type_t type)
{
    const char *str = NULL;
    int flipMode = 0; // no flip

    switch(type){
    case CAM_STREAM_TYPE_PREVIEW:
        if (!isRdiMode()) {
            str = get(KEY_QC_PREVIEW_FLIP);
        }
        break;
    case CAM_STREAM_TYPE_VIDEO:
        str = get(KEY_QC_VIDEO_FLIP);
        break;
    case CAM_STREAM_TYPE_SNAPSHOT:
    case CAM_STREAM_TYPE_POSTVIEW:
        str = get(KEY_QC_SNAPSHOT_PICTURE_FLIP);
        break;
    default:
        LOGD("No flip mode for stream type %d", type);
        break;
    }

    if(str != NULL){
        //Need give corresponding filp value based on flip mode strings
        int value = lookupAttr(FLIP_MODES_MAP, PARAM_MAP_SIZE(FLIP_MODES_MAP), str);
        if(value != NAME_NOT_FOUND)
            flipMode = value;
        }

    LOGH("the filp mode of stream type %d is %d .", type, flipMode);
    return flipMode;
}

/*===========================================================================
 * FUNCTION   : isSnapshotFDNeeded
 *
 * DESCRIPTION: check whether Face Detection Metadata is needed
 *
 * PARAMETERS : none
 *
 * RETURN     : bool type of status
 *              0 - need
 *              1 - not need
 *==========================================================================*/
bool QCameraParameters::isSnapshotFDNeeded()
{
    return getInt(KEY_QC_SNAPSHOT_FD_DATA);
}

/*===========================================================================
 * FUNCTION   : getStreamDimension
 *
 * DESCRIPTION: get stream dimension by its type
 *
 * PARAMETERS :
 *   @streamType : [input] stream type
 *   @dim        : [output] stream dimension
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getStreamDimension(cam_stream_type_t streamType,
                                               cam_dimension_t &dim)
{
    int32_t ret = NO_ERROR;
    memset(&dim, 0, sizeof(cam_dimension_t));

    switch (streamType) {
    case CAM_STREAM_TYPE_PREVIEW:
    case CAM_STREAM_TYPE_CALLBACK:
        getPreviewSize(&dim.width, &dim.height);
        break;
    case CAM_STREAM_TYPE_POSTVIEW:
        getPreviewSize(&dim.width, &dim.height);
        break;
    case CAM_STREAM_TYPE_SNAPSHOT:
        if (isPostProcScaling()) {
            getMaxPicSize(dim);
        } else if (getRecordingHintValue()) {
            // live snapshot
            getLiveSnapshotSize(dim);
        } else {
            getPictureSize(&dim.width, &dim.height);
        }
        break;
    case CAM_STREAM_TYPE_VIDEO:
        getVideoSize(&dim.width, &dim.height);
        break;
    case CAM_STREAM_TYPE_RAW:
        //dim = m_pCapability->raw_dim;
        getRawSize(dim);
        break;
    case CAM_STREAM_TYPE_METADATA:
        dim.width = (int32_t)sizeof(metadata_buffer_t);
        dim.height = 1;
        break;
    case CAM_STREAM_TYPE_OFFLINE_PROC:
        if (isPostProcScaling()) {
            if (getRecordingHintValue()) {
                // live snapshot
                getLiveSnapshotSize(dim);
            } else {
                getPictureSize(&dim.width, &dim.height);
            }
        }
        break;
    case CAM_STREAM_TYPE_ANALYSIS:
        cam_dimension_t prv_dim, max_dim;

        /* Analysis stream need aspect ratio as preview stream */
        getPreviewSize(&prv_dim.width, &prv_dim.height);

        cam_analysis_info_t analysisInfo;
        cam_feature_mask_t featureMask;

        featureMask = 0;
        getStreamPpMask(CAM_STREAM_TYPE_ANALYSIS, featureMask);
        ret = getAnalysisInfo(
                ((getRecordingHintValue() == true) && fdModeInVideo()),
                FALSE,
                featureMask,
                &analysisInfo);
        if (ret != NO_ERROR) {
            LOGE("getAnalysisInfo failed, ret = %d", ret);
            return ret;
        }

        max_dim.width = analysisInfo.analysis_max_res.width;
        max_dim.height = analysisInfo.analysis_max_res.height;

        if (prv_dim.width > max_dim.width || prv_dim.height > max_dim.height) {
            double max_ratio, requested_ratio;

            max_ratio = (double)max_dim.width / (double)max_dim.height;
            requested_ratio = (double)prv_dim.width / (double)prv_dim.height;

            if (max_ratio < requested_ratio) {
                dim.width = max_dim.width;
                dim.height = (int32_t)((double)dim.width / requested_ratio);
            } else {
                dim.height = max_dim.height;
                dim.width = (int32_t)((double)max_dim.height * requested_ratio);
            }
            dim.width &= ~0x1;
            dim.height &= ~0x1;
        } else {
            dim.width = prv_dim.width;
            dim.height = prv_dim.height;
        }
      break;
    case CAM_STREAM_TYPE_DEFAULT:
    default:
        LOGE("no dimension for unsupported stream type %d",
               streamType);
        ret = BAD_VALUE;
        break;
    }

    LOGD("Stream type = %d Stream Dimension = %d X %d",
             streamType, dim.width, dim.height);
    return ret;
}

/*===========================================================================
 * FUNCTION   : getParameters
 *
 * DESCRIPTION: Return a C string containing the parameters
 *
 * PARAMETERS : none
 *
 * RETURN     : a string containing parameter pairs
 *==========================================================================*/
char* QCameraParameters::getParameters()
{
    char* strParams = NULL;
    String8 str;

    int cur_width, cur_height;
    //Need take care Scale picture size
    if(m_reprocScaleParam.isScaleEnabled() &&
        m_reprocScaleParam.isUnderScaling()){
        int scale_width, scale_height;

        m_reprocScaleParam.getPicSizeFromAPK(scale_width,scale_height);
        getPictureSize(&cur_width, &cur_height);

        String8 pic_size;
        char buffer[32];
        snprintf(buffer, sizeof(buffer), "%dx%d", scale_width, scale_height);
        pic_size.append(buffer);
        set(CameraParameters::KEY_PICTURE_SIZE, pic_size);
    }

    str = flatten();
    strParams = (char *)malloc(sizeof(char)*(str.length()+1));
    if(strParams != NULL){
        memset(strParams, 0, sizeof(char)*(str.length()+1));
        strlcpy(strParams, str.string(), str.length()+1);
        strParams[str.length()] = 0;
    }

    if(m_reprocScaleParam.isScaleEnabled() &&
        m_reprocScaleParam.isUnderScaling()){
        //need set back picture size
        String8 pic_size;
        char buffer[32];
        snprintf(buffer, sizeof(buffer), "%dx%d", cur_width, cur_height);
        pic_size.append(buffer);
        set(CameraParameters::KEY_PICTURE_SIZE, pic_size);
    }
    return strParams;
}

#ifdef TARGET_TS_MAKEUP
/*===========================================================================
 * FUNCTION   : getTsMakeupInfo
 *
 * DESCRIPTION: get TsMakeup info
 *
 * PARAMETERS :
 *   @whiteLevel : [output] white level
 *   @cleanLevel : [output] clean level

 * RETURN     : Whether makeup is enabled or not
 *==========================================================================*/
bool QCameraParameters::getTsMakeupInfo(int &whiteLevel, int &cleanLevel) const
{
    const char* pch_makeup_enable = get(QCameraParameters::KEY_TS_MAKEUP);
    if (pch_makeup_enable == NULL) {
        LOGH("pch_makeup_enable = null");
        return false;
    }
    bool enableMakeup =
            (strcmp(pch_makeup_enable,"On") == 0);
    if (enableMakeup) {
        whiteLevel = getInt(QCameraParameters::KEY_TS_MAKEUP_WHITEN);
        cleanLevel = getInt(QCameraParameters::KEY_TS_MAKEUP_CLEAN);
    }
    return enableMakeup;
}
#endif

/*===========================================================================
 * FUNCTION   : getPreviewHalPixelFormat
 *
 * DESCRIPTION: get preview HAL pixel format
 *
 * PARAMETERS : none
 *
 * RETURN     : HAL pixel format
 *==========================================================================*/
int QCameraParameters::getPreviewHalPixelFormat()
{
    int32_t halPixelFormat;
    cam_format_t fmt;
    getStreamFormat(CAM_STREAM_TYPE_PREVIEW,fmt);

    switch (fmt) {
    case CAM_FORMAT_YUV_420_NV12:
        halPixelFormat = HAL_PIXEL_FORMAT_YCbCr_420_SP;
        break;
    case CAM_FORMAT_YUV_420_NV21:
        halPixelFormat = HAL_PIXEL_FORMAT_YCrCb_420_SP;
        break;
    case CAM_FORMAT_YUV_420_NV21_ADRENO:
        halPixelFormat = HAL_PIXEL_FORMAT_YCrCb_420_SP_ADRENO;
        break;
    case CAM_FORMAT_YUV_420_YV12:
        halPixelFormat = HAL_PIXEL_FORMAT_YV12;
        break;
    case CAM_FORMAT_YUV_420_NV12_VENUS:
        halPixelFormat = HAL_PIXEL_FORMAT_YCbCr_420_SP_VENUS;
        break;
    case CAM_FORMAT_YUV_420_NV21_VENUS:
        halPixelFormat = HAL_PIXEL_FORMAT_YCrCb_420_SP_VENUS;
        break;
    case CAM_FORMAT_YUV_420_NV12_UBWC:
        halPixelFormat = HAL_PIXEL_FORMAT_YCbCr_420_SP_VENUS_UBWC;
        break;
    case CAM_FORMAT_YUV_422_NV16:
    case CAM_FORMAT_YUV_422_NV61:
    default:
        halPixelFormat = HAL_PIXEL_FORMAT_YCrCb_420_SP;
        break;
    }
    LOGH("format %d\n", halPixelFormat);
    return halPixelFormat;
}

/*===========================================================================
 * FUNCTION   : getthumbnailSize
 *
 * DESCRIPTION: get thumbnail size
 *
 * PARAMETERS :
 *   @width, height : [output] thumbnail width and height
 *
 * RETURN     : none
 *==========================================================================*/
void QCameraParameters::getThumbnailSize(int *width, int *height) const
{
    *width = getInt(KEY_JPEG_THUMBNAIL_WIDTH);
    *height = getInt(KEY_JPEG_THUMBNAIL_HEIGHT);
}

/*===========================================================================
 * FUNCTION   : getZSLBurstInterval
 *
 * DESCRIPTION: get ZSL burst interval setting
 *
 * PARAMETERS : none
 *
 * RETURN     : ZSL burst interval value
 *==========================================================================*/
uint8_t QCameraParameters::getZSLBurstInterval()
{
    int interval = getInt(KEY_QC_ZSL_BURST_INTERVAL);
    if (interval < 0) {
        interval = 1;
    }
    return (uint8_t)interval;
}

/*===========================================================================
 * FUNCTION   : getZSLQueueDepth
 *
 * DESCRIPTION: get ZSL queue depth
 *
 * PARAMETERS : none
 *
 * RETURN     : ZSL queue depth value
 *==========================================================================*/
uint8_t QCameraParameters::getZSLQueueDepth()
{
    int qdepth = getInt(KEY_QC_ZSL_QUEUE_DEPTH);
    if (qdepth < 0) {
        qdepth = 2;
    }
    if (isLowMemoryDevice()) {
        qdepth = 1;
    }
    return (uint8_t)qdepth;
}

/*===========================================================================
 * FUNCTION   : getZSLBackLookCount
 *
 * DESCRIPTION: get ZSL backlook count setting
 *
 * PARAMETERS : none
 *
 * RETURN     : ZSL backlook count value
 *==========================================================================*/
uint8_t QCameraParameters::getZSLBackLookCount()
{
    int look_back = getInt(KEY_QC_ZSL_BURST_LOOKBACK);
    if (look_back < 0) {
        look_back = 2;
    }
    if (isLowMemoryDevice()) {
        look_back = 1;
    }
    return (uint8_t)look_back;
}
/*===========================================================================
 * FUNCTION   : isVideoBuffersCached
 *
 * DESCRIPTION: Query buffers are cached /un cached
 *
 * PARAMETERS : None
 *
 * RETURN     : buffers are cached /un cached
 *==========================================================================*/
bool QCameraParameters::isVideoBuffersCached()
{
    const char *cached_mem  = get(KEY_QC_CACHE_VIDEO_BUFFERS);
    if (cached_mem != NULL) {
        if (strcmp(cached_mem, VALUE_DISABLE) != 0) {
            return true;
        }
    }
    return false;
}
/*===========================================================================
 * FUNCTION   : getZSLMaxUnmatchedFrames
 *
 * DESCRIPTION: get allowed ZSL max unmatched frames number
 *
 * PARAMETERS : none
 *
 * RETURN     : ZSL backlook count value
 *==========================================================================*/
uint8_t QCameraParameters::getMaxUnmatchedFramesInQueue()
{
    return (uint8_t)(m_pCapability->min_num_pp_bufs);
}

/*===========================================================================
 * FUNCTION   : setRecordingHintValue
 *
 * DESCRIPTION: set recording hint
 *
 * PARAMETERS :
 *   @value   : video hint value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int QCameraParameters::setRecordingHintValue(int32_t value)
{
    LOGH("VideoHint = %d", value);
    bool newValue = (value > 0)? true : false;

    if ( m_bRecordingHint != newValue ) {
        m_bNeedRestart = true;
        m_bRecordingHint_new = newValue;
    } else {
        m_bRecordingHint_new = m_bRecordingHint;
    }
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_RECORDING_HINT, value)) {
        return BAD_VALUE;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : getNumOfSnapshots
 *
 * DESCRIPTION: get number of snapshot per shutter
 *
 * PARAMETERS : none
 *
 * RETURN     : number of snapshot per shutter
 *==========================================================================*/
uint8_t QCameraParameters::getNumOfSnapshots()
{
    uint8_t numOfSnapshot = 1;
    int val = getInt(KEY_QC_NUM_SNAPSHOT_PER_SHUTTER);
    if (0 < val) {
        numOfSnapshot = (uint8_t)val;
    }

    return (uint8_t)numOfSnapshot;
}

/*===========================================================================
 * FUNCTION   : getBurstCountForAdvancedCapture
 *
 * DESCRIPTION: get burst count for advanced capture.
 *
 * PARAMETERS : none
 *
 * RETURN     : number of snapshot required for advanced capture.
 *==========================================================================*/
uint8_t QCameraParameters::getBurstCountForAdvancedCapture()
{
    uint32_t burstCount = 0;
    if (isUbiFocusEnabled()) {
        //number of snapshots required for Ubi Focus.
        burstCount = m_pCapability->ubifocus_af_bracketing_need.burst_count;
    } else if (isUbiRefocus()) {
        //number of snapshots required for Opti Zoom.
        burstCount = m_pCapability->refocus_af_bracketing_need.burst_count;
    } else if (isOptiZoomEnabled()) {
        //number of snapshots required for Opti Zoom.
        burstCount = m_pCapability->opti_zoom_settings_need.burst_count;
    } else if (isChromaFlashEnabled()) {
        //number of snapshots required for Chroma Flash.
        burstCount = m_pCapability->chroma_flash_settings_need.burst_count;
    } else if (isStillMoreEnabled()) {
        //number of snapshots required for Still More.
        if (isSeeMoreEnabled()) {
            burstCount = 1;
        } else if ((m_stillmore_config.burst_count >=
                m_pCapability->stillmore_settings_need.min_burst_count) &&
                (m_stillmore_config.burst_count <=
                m_pCapability->stillmore_settings_need.max_burst_count)) {
            burstCount = m_stillmore_config.burst_count;
        } else {
            burstCount = m_pCapability->stillmore_settings_need.burst_count;
        }
    } else if (isHDREnabled()) {
        //number of snapshots required for HDR.
        burstCount = m_pCapability->hdr_bracketing_setting.num_frames;
    } else if (isAEBracketEnabled()) {
      burstCount = 0;
      const char *str_val = m_AEBracketingClient.values;
      if ((str_val != NULL) && (strlen(str_val) > 0)) {
          char prop[PROPERTY_VALUE_MAX];
          memset(prop, 0, sizeof(prop));
          strlcpy(prop, str_val, PROPERTY_VALUE_MAX);
          char *saveptr = NULL;
          char *token = strtok_r(prop, ",", &saveptr);
          while (token != NULL) {
              token = strtok_r(NULL, ",", &saveptr);
              burstCount++;
          }
      }
    }

    if (burstCount <= 0) {
        burstCount = getNumOfSnapshots();
    }

    LOGH("Snapshot burst count = %d", burstCount);
    return (uint8_t)burstCount;
}

/*===========================================================================
 * FUNCTION   : getNumOfRetroSnapshots
 *
 * DESCRIPTION: get number of retro active snapshots per shutter
 *
 * PARAMETERS : none
 *
 * RETURN     : number of retro active snapshots per shutter
 *==========================================================================*/
uint8_t QCameraParameters::getNumOfRetroSnapshots()
{
    int numOfRetroSnapshots = getInt(KEY_QC_NUM_RETRO_BURST_PER_SHUTTER);
    if (numOfRetroSnapshots < 0) {
        numOfRetroSnapshots = 0;
    }
    LOGH("numOfRetroSnaps - %d", numOfRetroSnapshots);
    return (uint8_t)numOfRetroSnapshots;
}

/*===========================================================================
 * FUNCTION   : getNumOfExtraHDRInBufsIfNeeded
 *
 * DESCRIPTION: get number of extra input buffers needed by HDR
 *
 * PARAMETERS : none
 *
 * RETURN     : number of extra buffers needed by HDR; 0 if not HDR enabled
 *==========================================================================*/
uint8_t QCameraParameters::getNumOfExtraHDRInBufsIfNeeded()
{
    unsigned int numOfBufs = 0;

    if (isHDREnabled()) {
        numOfBufs += m_pCapability->hdr_bracketing_setting.num_frames;
        if (isHDR1xFrameEnabled() && isHDR1xExtraBufferNeeded()) {
            numOfBufs++;
        }
        numOfBufs--; // Only additional buffers need to be returned
    }

    return (uint8_t)(numOfBufs);
}

/*===========================================================================
 * FUNCTION   : getNumOfExtraHDROutBufsIfNeeded
 *
 * DESCRIPTION: get number of extra output buffers needed by HDR
 *
 * PARAMETERS : none
 *
 * RETURN     : number of extra buffers needed by HDR; 0 if not HDR enabled
 *==========================================================================*/
uint8_t QCameraParameters::getNumOfExtraHDROutBufsIfNeeded()
{
    int numOfBufs = 0;

    if (isHDREnabled() && isHDR1xFrameEnabled()) {
        numOfBufs++;
    }

    return (uint8_t)(numOfBufs);
}

/*===========================================================================
 * FUNCTION   : getJpegQuality
 *
 * DESCRIPTION: get jpeg encoding quality
 *
 * PARAMETERS : none
 *
 * RETURN     : jpeg encoding quality
 *==========================================================================*/
uint32_t QCameraParameters::getJpegQuality()
{
    int quality = getInt(KEY_JPEG_QUALITY);
    if (quality < 0) {
        quality = 85; // set to default quality value
    }
    return (uint32_t)quality;
}

/*===========================================================================
 * FUNCTION   : getRotation
 *
 * DESCRIPTION: get application configured rotation
 *
 * PARAMETERS : none
 *
 * RETURN     : rotation value
 *==========================================================================*/
uint32_t QCameraParameters::getRotation() {
    int rotation = 0;

    //If exif rotation is set, do not rotate captured image
    if (!useJpegExifRotation()) {
        rotation = mRotation;
        if (rotation < 0) {
            rotation = 0;
        }
    }
    return (uint32_t)rotation;
}

/*===========================================================================
 * FUNCTION   : setJpegRotation
 *
 * DESCRIPTION: set jpeg rotation value configured internally
 *
 * PARAMETERS : none
 *
 * RETURN     : jpeg rotation value
 *==========================================================================*/
void QCameraParameters::setJpegRotation(int rotation) {
    if (rotation == 0 || rotation == 90 ||
            rotation == 180 || rotation == 270) {
        mJpegRotation = (uint32_t)rotation;
    }
}

/*===========================================================================
 * FUNCTION   : getDeviceRotation
 *
 * DESCRIPTION: get device rotation value
 *
 * PARAMETERS : none
 *
 * RETURN     : device rotation value
 *==========================================================================*/
uint32_t QCameraParameters::getDeviceRotation() {
    int rotation = 0;

    rotation = mRotation;
    if (rotation < 0) {
        rotation = 0;
    }

    return (uint32_t)rotation;
}

/*===========================================================================
 * FUNCTION   : getJpegExifRotation
 *
 * DESCRIPTION: get exif rotation value
 *
 * PARAMETERS : none
 *
 * RETURN     : rotation value
 *==========================================================================*/
uint32_t QCameraParameters::getJpegExifRotation() {
    int rotation = 0;

    if (useJpegExifRotation()) {
        rotation = mRotation;
        if (rotation < 0) {
            rotation = 0;
        }
    }
    return (uint32_t)rotation;
}

/*===========================================================================
 * FUNCTION   : useJpegExifRotation
 *
 * DESCRIPTION: Check if jpeg exif rotation need to be used
 *
 * PARAMETERS : none
 *
 * RETURN     : true if jpeg exif rotation need to be used
 *==========================================================================*/
bool QCameraParameters::useJpegExifRotation() {
    char exifRotation[PROPERTY_VALUE_MAX];

    property_get("persist.camera.exif.rotation", exifRotation, "off");

    if (!strcmp(exifRotation, "on")) {
        return true;
    }

    if (!(m_pCapability->qcom_supported_feature_mask & CAM_QCOM_FEATURE_ROTATION)) {
        return true;
    }

    return false;
}

/*===========================================================================
 * FUNCTION   : getEffectValue
 *
 * DESCRIPTION: get effect value
 *
 * PARAMETERS : none
 *
 * RETURN     : effect value
 *==========================================================================*/
int32_t QCameraParameters::getEffectValue()
{
    uint32_t cnt = 0;
    const char *effect = get(KEY_EFFECT);
    if (effect) {
        while (NULL != EFFECT_MODES_MAP[cnt].desc) {
            if (!strcmp(EFFECT_MODES_MAP[cnt].desc, effect)) {
                return EFFECT_MODES_MAP[cnt].val;
            }
            cnt++;
        }
    } else {
        LOGW("Missing effect value");
    }
    return CAM_EFFECT_MODE_OFF;
}

/*===========================================================================
 * FUNCTION   : parseGPSCoordinate
 *
 * DESCRIPTION: parse GPS coordinate string
 *
 * PARAMETERS :
 *   @coord_str : [input] coordinate string
 *   @coord     : [output]  ptr to struct to store coordinate
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int QCameraParameters::parseGPSCoordinate(const char *coord_str, rat_t* coord)
{
    if(coord == NULL) {
        LOGE("error, invalid argument coord == NULL");
        return BAD_VALUE;
    }
    double degF = atof(coord_str);
    if (degF < 0) {
        degF = -degF;
    }
    double minF = (degF - (double)(int) degF) * 60.0;
    double secF = (minF - (double)(int) minF) * 60.0;

    getRational(&coord[0], (int)degF, 1);
    getRational(&coord[1], (int)minF, 1);
    getRational(&coord[2], (int)(secF * 10000.0), 10000);
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : getExifDateTime
 *
 * DESCRIPTION: query exif date time
 *
 * PARAMETERS :
 *   @dateTime    : String to store exif date time.
 *                  Should be leaved unchanged in case of error.
 *   @subsecTime  : String to store exif time nanoseconds.
 *                  Should be leaved unchanged in case of error.
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getExifDateTime(String8 &dateTime, String8 &subsecTime)
{
    int32_t ret = NO_ERROR;

    //get time and date from system
    struct timeval tv;
    struct tm timeinfo_data;

    int res = gettimeofday(&tv, NULL);
    if (0 == res) {
        struct tm *timeinfo = localtime_r(&tv.tv_sec, &timeinfo_data);
        if (NULL != timeinfo) {
            //Write datetime according to EXIF Spec
            //"YYYY:MM:DD HH:MM:SS" (20 chars including \0)
            dateTime = String8::format("%04d:%02d:%02d %02d:%02d:%02d",
                    timeinfo->tm_year + 1900, timeinfo->tm_mon + 1,
                    timeinfo->tm_mday, timeinfo->tm_hour,
                    timeinfo->tm_min, timeinfo->tm_sec);
            //Write subsec according to EXIF Sepc
            subsecTime = String8::format("%06ld", tv.tv_usec);
        } else {
            LOGE("localtime_r() error");
            ret = UNKNOWN_ERROR;
        }
    } else if (-1 == res) {
        LOGE("gettimeofday() error: %s", strerror(errno));
        ret = UNKNOWN_ERROR;
    } else {
        LOGE("gettimeofday() unexpected return code: %d", res);
        ret = UNKNOWN_ERROR;
    }

    return ret;
}

/*===========================================================================
 * FUNCTION   : getRational
 *
 * DESCRIPTION: compose rational struct
 *
 * PARAMETERS :
 *   @rat     : ptr to struct to store rational info
 *   @num     :num of the rational
 *   @denom   : denom of the rational
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getRational(rat_t *rat, int num, int denom)
{
    if ((0 > num) || (0 > denom)) {
        LOGE("Negative values");
        return BAD_VALUE;
    }
    if (NULL == rat) {
        LOGE("NULL rat input");
        return BAD_VALUE;
    }
    rat->num = (uint32_t)num;
    rat->denom = (uint32_t)denom;
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : getExifFocalLength
 *
 * DESCRIPTION: get exif focal lenght
 *
 * PARAMETERS :
 *   @focalLength : ptr to rational strcut to store focal lenght
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getExifFocalLength(rat_t *focalLength)
{
    int focalLengthValue =
        (int)(getFloat(QCameraParameters::KEY_FOCAL_LENGTH) * FOCAL_LENGTH_DECIMAL_PRECISION);
    return getRational(focalLength, focalLengthValue, FOCAL_LENGTH_DECIMAL_PRECISION);
}

/*===========================================================================
 * FUNCTION   : getExifIsoSpeed
 *
 * DESCRIPTION: get exif ISO speed
 *
 * PARAMETERS : none
 *
 * RETURN     : ISO speed value
 *==========================================================================*/
uint16_t QCameraParameters::getExifIsoSpeed()
{
    uint16_t isoSpeed = 0;
    const char *iso_str = get(QCameraParameters::KEY_QC_ISO_MODE);
    int iso_index = lookupAttr(ISO_MODES_MAP, PARAM_MAP_SIZE(ISO_MODES_MAP), iso_str);
    switch (iso_index) {
    case CAM_ISO_MODE_AUTO:
        isoSpeed = 0;
        break;
    case CAM_ISO_MODE_DEBLUR:
        isoSpeed = 1;
        break;
    case CAM_ISO_MODE_100:
        isoSpeed = 100;
        break;
    case CAM_ISO_MODE_200:
        isoSpeed = 200;
        break;
    case CAM_ISO_MODE_400:
        isoSpeed = 400;
        break;
    case CAM_ISO_MODE_800:
        isoSpeed = 800;
        break;
    case CAM_ISO_MODE_1600:
        isoSpeed = 1600;
        break;
    case CAM_ISO_MODE_3200:
        isoSpeed = 3200;
        break;
    }
    return isoSpeed;
}

/*===========================================================================
 * FUNCTION   : getExifGpsProcessingMethod
 *
 * DESCRIPTION: get GPS processing method
 *
 * PARAMETERS :
 *   @gpsProcessingMethod : string to store GPS process method
 *   @count               : lenght of the string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getExifGpsProcessingMethod(char *gpsProcessingMethod,
                                                      uint32_t &count)
{
    const char *str = get(KEY_GPS_PROCESSING_METHOD);
    if(str != NULL) {
        memcpy(gpsProcessingMethod, ExifAsciiPrefix, EXIF_ASCII_PREFIX_SIZE);
        count = EXIF_ASCII_PREFIX_SIZE;
        strlcpy(gpsProcessingMethod + EXIF_ASCII_PREFIX_SIZE, str, GPS_PROCESSING_METHOD_SIZE);
        count += (uint32_t)strlen(str);
        gpsProcessingMethod[count++] = '\0'; // increase 1 for the last NULL char
        return NO_ERROR;
    } else {
        return BAD_VALUE;
    }
}

/*===========================================================================
 * FUNCTION   : getExifLatitude
 *
 * DESCRIPTION: get exif latitude
 *
 * PARAMETERS :
 *   @latitude : ptr to rational struct to store latitude info
 *   @ladRef   : charater to indicate latitude reference
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getExifLatitude(rat_t *latitude,
                                           char *latRef)
{
    const char *str = get(KEY_GPS_LATITUDE);
    if(str != NULL) {
        parseGPSCoordinate(str, latitude);

        //set Latitude Ref
        float latitudeValue = getFloat(KEY_GPS_LATITUDE);
        if(latitudeValue < 0.0f) {
            latRef[0] = 'S';
        } else {
            latRef[0] = 'N';
        }
        latRef[1] = '\0';
        return NO_ERROR;
    }else{
        return BAD_VALUE;
    }
}

/*===========================================================================
 * FUNCTION   : getExifLongitude
 *
 * DESCRIPTION: get exif longitude
 *
 * PARAMETERS :
 *   @longitude : ptr to rational struct to store longitude info
 *   @lonRef    : charater to indicate longitude reference
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getExifLongitude(rat_t *longitude,
                                            char *lonRef)
{
    const char *str = get(KEY_GPS_LONGITUDE);
    if(str != NULL) {
        parseGPSCoordinate(str, longitude);

        //set Longitude Ref
        float longitudeValue = getFloat(KEY_GPS_LONGITUDE);
        if(longitudeValue < 0.0f) {
            lonRef[0] = 'W';
        } else {
            lonRef[0] = 'E';
        }
        lonRef[1] = '\0';
        return NO_ERROR;
    }else{
        return BAD_VALUE;
    }
}

/*===========================================================================
 * FUNCTION   : getExifAltitude
 *
 * DESCRIPTION: get exif altitude
 *
 * PARAMETERS :
 *   @altitude : ptr to rational struct to store altitude info
 *   @altRef   : charater to indicate altitude reference
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getExifAltitude(rat_t *altitude,
                                           char *altRef)
{
    const char *str = get(KEY_GPS_ALTITUDE);
    if(str != NULL) {
        double value = atof(str);
        *altRef = 0;
        if(value < 0){
            *altRef = 1;
            value = -value;
        }
        return getRational(altitude, (int)(value*1000), 1000);
    }else{
        return BAD_VALUE;
    }
}

/*===========================================================================
 * FUNCTION   : getExifGpsDateTimeStamp
 *
 * DESCRIPTION: get exif GPS date time stamp
 *
 * PARAMETERS :
 *   @gpsDateStamp : GPS date time stamp string
 *   @bufLen       : length of the string
 *   @gpsTimeStamp : ptr to rational struct to store time stamp info
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getExifGpsDateTimeStamp(char *gpsDateStamp,
                                                   uint32_t bufLen,
                                                   rat_t *gpsTimeStamp)
{
    const char *str = get(KEY_GPS_TIMESTAMP);
    if(str != NULL) {
        time_t unixTime = (time_t)atol(str);
        struct tm *UTCTimestamp = gmtime(&unixTime);

        if(!UTCTimestamp) {
            LOGE("UTCTimestamp is null\n");
            return BAD_VALUE;
        }

        strftime(gpsDateStamp, bufLen, "%Y:%m:%d", UTCTimestamp);

        getRational(&gpsTimeStamp[0], UTCTimestamp->tm_hour, 1);
        getRational(&gpsTimeStamp[1], UTCTimestamp->tm_min, 1);
        getRational(&gpsTimeStamp[2], UTCTimestamp->tm_sec, 1);

        return NO_ERROR;
    } else {
        return BAD_VALUE;
    }
}

/*===========================================================================
 * FUNCTION   : updateFocusDistances
 *
 * DESCRIPTION: update focus distances
 *
 * PARAMETERS :
 *   @focusDistances : ptr to focus distance info
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateFocusDistances(cam_focus_distances_info_t *focusDistances)
{
    String8 str;
    char buffer[32] = {0};
    //set all distances to infinity if focus mode is infinity
    if(mFocusMode == CAM_FOCUS_MODE_INFINITY) {
        str.append("Infinity,Infinity,Infinity");
    } else {
        if (focusDistances->focus_distance[0] < FOCUS_PERCISION) {
            str.append("Infinity");
        } else {
            snprintf(buffer, sizeof(buffer), "%f", 1.0/focusDistances->focus_distance[0]);
            str.append(buffer);
        }
        if (focusDistances->focus_distance[1] < FOCUS_PERCISION) {
            str.append(",Infinity");
        } else {
            snprintf(buffer, sizeof(buffer), ",%f", 1.0/focusDistances->focus_distance[1]);
            str.append(buffer);
        }
        if (focusDistances->focus_distance[2] < FOCUS_PERCISION) {
            str.append(",Infinity");
        } else {
            snprintf(buffer, sizeof(buffer), ",%f", 1.0/focusDistances->focus_distance[2]);
            str.append(buffer);
        }
    }
    LOGH("setting KEY_FOCUS_DISTANCES as %s", __FUNCTION__, str.string());
    set(QCameraParameters::KEY_FOCUS_DISTANCES, str.string());
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : updateRecordingHintValue
 *
 * DESCRIPTION: update recording hint locally and to daemon
 *
 * PARAMETERS :
 *   @value   : video hint value
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateRecordingHintValue(int32_t value)
{
    int32_t rc = NO_ERROR;
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    rc = setRecordingHintValue(value);
    if (rc != NO_ERROR) {
        LOGE("Failed to update table");
        return rc;
    }

    if(m_bDISEnabled && (value==1)) {
        LOGH("%d: Setting DIS value again!!");
        setDISValue(VALUE_ENABLE);
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to update recording hint");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setHistogram
 *
 * DESCRIPTION: set histogram
 *
 * PARAMETERS :
 *   @enabled : if histogram is enabled
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setHistogram(bool enabled)
{
    if(m_bHistogramEnabled == enabled) {
        LOGH("histogram flag not changed, no ops here");
        return NO_ERROR;
    }

    // set parm for histogram
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    int32_t value = enabled ? 1 : 0;
    int32_t rc = NO_ERROR;
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_HISTOGRAM, value)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to set histogram");
        return rc;
    }

    m_bHistogramEnabled = enabled;

    LOGH("Histogram -> %s", m_bHistogramEnabled ? "Enabled" : "Disabled");

    return rc;
}

/*===========================================================================
 * FUNCTION   : setIntEvent
 *
 * DESCRIPTION: set setIntEvent
 *
 * PARAMETERS :
 *   @params : image size and dimensions
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setIntEvent(cam_int_evt_params_t params)
{
    int32_t rc = NO_ERROR;

    if ( m_pParamBuf == NULL ) {
        return NO_INIT;
    }

    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    //Sending snapshot taken notification back to Eztune"
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_INT_EVT, params)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to set frameskip info parm");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setFaceDetectionOption
 *
 * DESCRIPTION: set if face detection is enabled by SendCommand
 *
 * PARAMETERS :
 *   @enabled : bool flag if face detection should be enabled
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
 int32_t QCameraParameters::setFaceDetectionOption(bool enabled)
{
    m_bFaceDetectionOn = enabled;
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setFaceDetection
 *
 * DESCRIPTION: set face detection
 *
 * PARAMETERS :
 *   @enabled : if face detection is enabled
 *   @initCommit : if configuration list need to be initialized and commited
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFaceDetection(bool enabled, bool initCommit)
{
    uint32_t faceProcMask = m_nFaceProcMask;
    // set face detection mask
    if (enabled) {
        faceProcMask |= CAM_FACE_PROCESS_MASK_DETECTION;
        if (getRecordingHintValue() > 0) {
            faceProcMask = 0;
            faceProcMask |= CAM_FACE_PROCESS_MASK_FOCUS;
            if (fdModeInVideo() == CAM_FACE_PROCESS_MASK_DETECTION) {
                faceProcMask |= CAM_FACE_PROCESS_MASK_DETECTION;
            }
        } else {
            faceProcMask |= CAM_FACE_PROCESS_MASK_FOCUS;
            faceProcMask |= CAM_FACE_PROCESS_MASK_DETECTION;
        }
        if (isTruePortraitEnabled()) {
            LOGL("QCameraParameters::setFaceDetection trueportrait enabled");
            faceProcMask |= CAM_FACE_PROCESS_MASK_GAZE;
        } else {
            LOGL("QCameraParameters::setFaceDetection trueportrait disabled");
            faceProcMask &= ~CAM_FACE_PROCESS_MASK_GAZE;
        }
    } else {
        faceProcMask &= ~(CAM_FACE_PROCESS_MASK_DETECTION
                | CAM_FACE_PROCESS_MASK_FOCUS
                | CAM_FACE_PROCESS_MASK_GAZE);
    }

    if(m_nFaceProcMask == faceProcMask) {
        LOGH("face process mask not changed, no ops here");
        return NO_ERROR;
    }

    m_nFaceProcMask = faceProcMask;

    // set parm for face detection
    uint32_t requested_faces = (uint32_t)getInt(KEY_QC_MAX_NUM_REQUESTED_FACES);
    cam_fd_set_parm_t fd_set_parm;
    memset(&fd_set_parm, 0, sizeof(cam_fd_set_parm_t));
    fd_set_parm.fd_mode = faceProcMask;
    fd_set_parm.num_fd = requested_faces;

    LOGH("[KPI Perf]: PROFILE_FACE_DETECTION_VALUE = %d num_fd = %d",
           faceProcMask,requested_faces);

    if (initCommit) {
        if(initBatchUpdate(m_pParamBuf) < 0 ) {
            LOGE("Failed to initialize group update table");
            return BAD_TYPE;
        }
    }

    int32_t rc = NO_ERROR;

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_FD, fd_set_parm)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    if (initCommit) {
        rc = commitSetBatch();
        if (rc != NO_ERROR) {
            LOGE("Failed to set face detection parm");
            return rc;
        }
    }

    LOGH("FaceProcMask -> %d", m_nFaceProcMask);

    return rc;
}

/*===========================================================================
 * FUNCTION   : setFrameSkip
 *
 * DESCRIPTION: send ISP frame skip pattern to camera daemon
 *
 * PARAMETERS :
 *   @pattern : skip pattern for ISP
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFrameSkip(enum msm_vfe_frame_skip_pattern pattern)
{
    int32_t rc = NO_ERROR;

    if ( m_pParamBuf == NULL ) {
        return NO_INIT;
    }

    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_FRAMESKIP, (int32_t)pattern)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to set frameskip info parm");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : updateRAW
 *
 * DESCRIPTION: Query sensor output size based on maximum stream dimension
 *
 * PARAMETERS :
 *   @max_dim : maximum stream dimension
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateRAW(cam_dimension_t max_dim)
{
    int32_t rc = NO_ERROR;
    cam_dimension_t raw_dim, pic_dim;

    // If offline raw is enabled, check the dimensions from Picture size since snapshot
    // stream is not added but final JPEG is required of snapshot size
    if (getofflineRAW()) {
        getStreamDimension(CAM_STREAM_TYPE_SNAPSHOT, pic_dim);
        if (pic_dim.width > max_dim.width) {
            max_dim.width = pic_dim.width;
        }
        if (pic_dim.height > max_dim.height) {
            max_dim.height = pic_dim.height;
        }
    }

    if (max_dim.width == 0 || max_dim.height == 0) {
        max_dim = m_pCapability->raw_dim[0];
    }

    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_MAX_DIMENSION, max_dim)) {
        LOGE("Failed to update table for CAM_INTF_PARM_MAX_DIMENSION ");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to set lock CAM_INTF_PARM_MAX_DIMENSION parm");
        return rc;
    }

    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    ADD_GET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_RAW_DIMENSION);

    rc = commitGetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to get commit CAM_INTF_PARM_RAW_DIMENSION");
        return rc;
    }

    READ_PARAM_ENTRY(m_pParamBuf, CAM_INTF_PARM_RAW_DIMENSION, raw_dim);

    LOGH("RAW Dimension = %d X %d",raw_dim.width,raw_dim.height);
    if (raw_dim.width == 0 || raw_dim.height == 0) {
        LOGW("Error getting RAW size. Setting to Capability value");
        raw_dim = m_pCapability->raw_dim[0];
    }
    setRawSize(raw_dim);
    return rc;
}

/*===========================================================================
 * FUNCTION   : setHDRSceneEnable
 *
 * DESCRIPTION: sets hdr scene deteced flag
 *
 * PARAMETERS :
 *   @bflag : hdr scene deteced
 *
 * RETURN     : nothing
 *==========================================================================*/
void QCameraParameters::setHDRSceneEnable(bool bflag)
{
    bool bupdate = false;
    if (m_HDRSceneEnabled != bflag) {
        bupdate = true;
    }
    m_HDRSceneEnabled = bflag;

    if (bupdate) {
        updateFlash(true);
    }
}

/*===========================================================================
 * FUNCTION   : getASDStateString
 *
 * DESCRIPTION: get ASD result in string format
 *
 * PARAMETERS :
 *   @scene : selected scene mode
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
 const char *QCameraParameters::getASDStateString(cam_auto_scene_t scene)
{
    switch (scene) {
      case S_NORMAL :
        return "Normal";
      case S_SCENERY:
        return "Scenery";
      case S_PORTRAIT:
        return "Portrait";
      case S_PORTRAIT_BACKLIGHT:
        return "Portrait-Backlight";
      case S_SCENERY_BACKLIGHT:
        return "Scenery-Backlight";
      case S_BACKLIGHT:
        return "Backlight";
      default:
        return "<Unknown!>";
      }
}

/*===========================================================================
 * FUNCTION   : parseNDimVector
 *
 * DESCRIPTION: helper function to parse a string like "(1, 2, 3, 4, ..., N)"
 *              into N-dimension vector
 *
 * PARAMETERS :
 *   @str     : string to be parsed
 *   @num     : output array of size N to store vector element values
 *   @N       : number of dimension
 *   @delim   : delimeter to seperete string
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::parseNDimVector(const char *str, int *num, int N, char delim = ',')
{
    char *start, *end;
    if (num == NULL) {
        LOGE("Invalid output array (num == NULL)");
        return BAD_VALUE;
    }

    //check if string starts and ends with parantheses
    if(str[0] != '(' || str[strlen(str)-1] != ')') {
        LOGE("Invalid format of string %s, valid format is (n1, n2, n3, n4 ...)",
               str);
        return BAD_VALUE;
    }
    start = (char*) str;
    start++;
    for(int i=0; i<N; i++) {
        *(num+i) = (int) strtol(start, &end, 10);
        if(*end != delim && i < N-1) {
            LOGE("Cannot find delimeter '%c' in string \"%s\". end = %c",
                   delim, str, *end);
            return -1;
        }
        start = end+1;
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : parseCameraAreaString
 *
 * DESCRIPTION: helper function to parse a string of camera areas like
 *              "(1, 2, 3, 4, 5),(1, 2, 3, 4, 5),..."
 *
 * PARAMETERS :
 *   @str             : string to be parsed
 *   @max_num_areas   : max number of areas
 *   @pAreas          : ptr to struct to store areas
 *   @num_areas_found : number of areas found
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::parseCameraAreaString(const char *str,
                                                 int max_num_areas,
                                                 cam_area_t *pAreas,
                                                 int& num_areas_found)
{
    char area_str[32];
    const char *start, *end, *p;
    start = str; end = NULL;
    int values[5], index=0;
    num_areas_found = 0;

    memset(values, 0, sizeof(values));
    while(start != NULL) {
       if(*start != '(') {
            LOGE("error: Ill formatted area string: %s", str);
            return BAD_VALUE;
       }
       end = strchr(start, ')');
       if(end == NULL) {
            LOGE("error: Ill formatted area string: %s", str);
            return BAD_VALUE;
       }
       int i;
       for (i=0,p=start; p<=end; p++, i++) {
           area_str[i] = *p;
       }
       area_str[i] = '\0';
       if(parseNDimVector(area_str, values, 5) < 0){
            LOGE("error: Failed to parse the area string: %s", area_str);
            return BAD_VALUE;
       }
       // no more areas than max_num_areas are accepted.
       if(index >= max_num_areas) {
            LOGE("error: too many areas specified %s", str);
            return BAD_VALUE;
       }
       pAreas[index].rect.left = values[0];
       pAreas[index].rect.top = values[1];
       pAreas[index].rect.width = values[2] - values[0];
       pAreas[index].rect.height = values[3] - values[1];
       pAreas[index].weight = values[4];

       index++;
       start = strchr(end, '('); // serach for next '('
    }
    num_areas_found = index;
    return 0;
}

/*===========================================================================
 * FUNCTION   : validateCameraAreas
 *
 * DESCRIPTION: helper function to validate camera areas within (-1000, 1000)
 *
 * PARAMETERS :
 *   @areas     : ptr to array of areas
 *   @num_areas : number of areas
 *
 * RETURN     : true --  area is in valid range
 *              false -- not valid
 *==========================================================================*/
bool QCameraParameters::validateCameraAreas(cam_area_t *areas, int num_areas)
{
    // special case: default area
    if (num_areas == 1 &&
        areas[0].rect.left == 0 &&
        areas[0].rect.top == 0 &&
        areas[0].rect.width == 0 &&
        areas[0].rect.height == 0 &&
        areas[0].weight == 0) {
        return true;
    }

    for(int i = 0; i < num_areas; i++) {
        // left should be >= -1000
        if(areas[i].rect.left < -1000) {
            return false;
        }

        // top  should be >= -1000
        if(areas[i].rect.top < -1000) {
            return false;
        }

        // width or height should be > 0
        if (areas[i].rect.width <= 0 || areas[i].rect.height <= 0) {
            return false;
        }

        // right  should be <= 1000
        if(areas[i].rect.left + areas[i].rect.width > 1000) {
            return false;
        }

        // bottom should be <= 1000
        if(areas[i].rect.top + areas[i].rect.height > 1000) {
            return false;
        }

        // weight should be within (1, 1000)
        if (areas[i].weight < 1 || areas[i].weight > 1000) {
            return false;
        }
    }
    return true;
}

/*===========================================================================
 * FUNCTION   : isYUVFrameInfoNeeded
 *
 * DESCRIPTION: In AE-Bracket mode, we need set yuv buffer information for up-layer
 *
 * PARAMETERS : none
 *
 * RETURN     : true: needed
 *              false: no need
 *==========================================================================*/
bool QCameraParameters::isYUVFrameInfoNeeded()
{
    //In AE-Bracket mode, we need set raw buffer information for up-layer
    if(!isNV21PictureFormat() && !isNV16PictureFormat()){
        return false;
    }
    const char *aecBracketStr =  get(KEY_QC_AE_BRACKET_HDR);

    int value = lookupAttr(BRACKETING_MODES_MAP, PARAM_MAP_SIZE(BRACKETING_MODES_MAP),
            aecBracketStr);
    LOGH("aecBracketStr=%s, value=%d.", aecBracketStr, value);
    return (value == CAM_EXP_BRACKETING_ON);
}

/*===========================================================================
 * FUNCTION   : getFrameFmtString
 *
 * DESCRIPTION: get string name of frame format
 *
 * PARAMETERS :
 *   @frame   : frame format
 *
 * RETURN     : string name of frame format
 *==========================================================================*/
const char *QCameraParameters::getFrameFmtString(cam_format_t fmt)
{
    return lookupNameByValue(PICTURE_TYPES_MAP, PARAM_MAP_SIZE(PICTURE_TYPES_MAP), fmt);
}

/*===========================================================================
 * FUNCTION   : setDcrf
 *
 * DESCRIPTION: Enable/Disable DCRF (dual-camera-range-finding)
 *
 * RETURN     : none
 *==========================================================================*/
void QCameraParameters::setDcrf()
{
    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));

    // Set DCRF to off by default (assuming single-camera mode)
    m_bDcrfEnabled = 0;

    // In dual-cam mode, get sysprop and set it to on by default
    if(m_relCamSyncInfo.sync_control == CAM_SYNC_RELATED_SENSORS_ON) {
        property_get("persist.camera.dcrf.enable", prop, "1");
        m_bDcrfEnabled = atoi(prop);
    }
}

/*===========================================================================
 * FUNCTION   : setRelatedCamSyncInfo
 *
 * DESCRIPTION: set the related cam info parameters
 * the related cam info is cached into params to make some decisions beforehand
 *
 * PARAMETERS :
 *   @info  : ptr to related cam info parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setRelatedCamSyncInfo(
        cam_sync_related_sensors_event_info_t* info)
{
    if(info != NULL){
        memcpy(&m_relCamSyncInfo, info,
                sizeof(cam_sync_related_sensors_event_info_t));
        return NO_ERROR;
    } else {
        LOGE("info buffer is null");
        return UNKNOWN_ERROR;
    }
}

/*===========================================================================
 * FUNCTION   : getRelatedCamSyncInfo
 *
 * DESCRIPTION:returns the related cam sync info for this HWI instance
 *
 * PARAMETERS :none
 *
 * RETURN     : const pointer to cam_sync_related_sensors_event_info_t
 *==========================================================================*/
const cam_sync_related_sensors_event_info_t*
        QCameraParameters::getRelatedCamSyncInfo(void)
{
    return &m_relCamSyncInfo;
}

/*===========================================================================
 * FUNCTION   : setFrameSyncEnabled
 *
 * DESCRIPTION: sets whether frame sync is enabled
 *
 * PARAMETERS :
 *   @enable  : flag whether to enable or disable frame sync
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setFrameSyncEnabled(bool enable)
{
    m_bFrameSyncEnabled = enable;
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : isFrameSyncEnabled
 *
 * DESCRIPTION: returns whether frame sync is enabled
 *
 * PARAMETERS :none
 *
 * RETURN     : bool indicating whether frame sync is enabled
 *==========================================================================*/
bool QCameraParameters::isFrameSyncEnabled(void)
{
    return m_bFrameSyncEnabled;
}

/*===========================================================================
 * FUNCTION   : bundleRelatedCameras
 *
 * DESCRIPTION: send trigger for bundling related camera sessions in the server
 *
 * PARAMETERS :
 *   @sync        :indicates whether syncing is On or Off
 *   @sessionid  :session id for other camera session
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::bundleRelatedCameras(bool sync,
        uint32_t sessionid)
{
    int32_t rc = NO_ERROR;

    if (NULL == m_pCamOpsTbl) {
        LOGE("Ops not initialized");
        return NO_INIT;
    }

    LOGD("Sending Bundling cmd sync %d, SessionId %d ",
            sync, sessionid);

    if(m_pRelCamSyncBuf) {
        if(sync) {
            m_pRelCamSyncBuf->sync_control = CAM_SYNC_RELATED_SENSORS_ON;
        }
        else {
            m_pRelCamSyncBuf->sync_control = CAM_SYNC_RELATED_SENSORS_OFF;
        }
        m_pRelCamSyncBuf->mode = m_relCamSyncInfo.mode;
        m_pRelCamSyncBuf->type = m_relCamSyncInfo.type;
        m_pRelCamSyncBuf->related_sensor_session_id = sessionid;
        rc = m_pCamOpsTbl->ops->sync_related_sensors(
                m_pCamOpsTbl->camera_handle, m_pRelCamSyncBuf);
    } else {
        LOGE("Related Cam SyncBuffer not allocated", rc);
        return NO_INIT;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : getRelatedCamCalibration
 *
 * DESCRIPTION: fetch the related camera subsystem calibration data
 *
 * PARAMETERS :
 *   @calib  : calibration data fetched
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getRelatedCamCalibration(
        cam_related_system_calibration_data_t* calib)
{
    int32_t rc = NO_ERROR;

    if(!calib) {
        return BAD_TYPE;
    }

    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    ADD_GET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
            CAM_INTF_PARM_RELATED_SENSORS_CALIBRATION);

    rc = commitGetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to get related cam calibration info");
        return rc;
    }

    READ_PARAM_ENTRY(m_pParamBuf,
            CAM_INTF_PARM_RELATED_SENSORS_CALIBRATION, *calib);

    LOGD("CALIB version %d ", calib->calibration_format_version);
    LOGD("CALIB normalized_focal_length %f ",
            calib->main_cam_specific_calibration.normalized_focal_length);
    LOGD("CALIB native_sensor_resolution_width %d ",
            calib->main_cam_specific_calibration.native_sensor_resolution_width);
    LOGD("CALIB native_sensor_resolution_height %d ",
            calib->main_cam_specific_calibration.native_sensor_resolution_height);
    LOGD("CALIB sensor_resolution_width %d ",
            calib->main_cam_specific_calibration.calibration_sensor_resolution_width);
    LOGD("CALIB sensor_resolution_height %d ",
            calib->main_cam_specific_calibration.calibration_sensor_resolution_height);
    LOGD("CALIB focal_length_ratio %f ",
            calib->main_cam_specific_calibration.focal_length_ratio);

    return rc;
}

/*===========================================================================
 * FUNCTION   : initBatchUpdate
 *
 * DESCRIPTION: init camera parameters buf entries
 *
 * PARAMETERS :
 *   @p_table : ptr to parameter buffer
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::initBatchUpdate(parm_buffer_t *p_table)
{
    m_tempMap.clear();
    clear_metadata_buffer(p_table);
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : commitSetBatch
 *
 * DESCRIPTION: commit all set parameters in the batch work to backend
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::commitSetBatch()
{
    int32_t rc = NO_ERROR;
    int32_t i = 0;

    if (NULL == m_pParamBuf) {
        LOGE("Params not initialized");
        return NO_INIT;
    }

    /* Loop to check if atleast one entry is valid */
    for(i = 0; i < CAM_INTF_PARM_MAX; i++){
        if(m_pParamBuf->is_valid[i])
            break;
    }

    if (NULL == m_pCamOpsTbl) {
        LOGE("Ops not initialized");
        return NO_INIT;
    }

    if (i < CAM_INTF_PARM_MAX) {
        rc = m_pCamOpsTbl->ops->set_parms(m_pCamOpsTbl->camera_handle, m_pParamBuf);
    }
    if (rc == NO_ERROR) {
        // commit change from temp storage into param map
        rc = commitParamChanges();
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : commitGetBatch
 *
 * DESCRIPTION: commit all get parameters in the batch work to backend
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::commitGetBatch()
{
    int32_t rc = NO_ERROR;
    int32_t i = 0;

    if (NULL == m_pParamBuf) {
        LOGE("Params not initialized");
        return NO_INIT;
    }

    /* Loop to check if atleast one entry is valid */
    for(i = 0; i < CAM_INTF_PARM_MAX; i++){
        if(m_pParamBuf->is_valid[i])
            break;
    }

    if (NULL == m_pCamOpsTbl) {
        LOGE("Ops not initialized");
        return NO_INIT;
    }

    if (i < CAM_INTF_PARM_MAX) {
        return m_pCamOpsTbl->ops->get_parms(m_pCamOpsTbl->camera_handle, m_pParamBuf);
    } else {
        return NO_ERROR;
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : updateParamEntry
 *
 * DESCRIPTION: update a parameter entry in the local temp map obj
 *
 * PARAMETERS :
 *   @key     : key of the entry
 *   @value   : value of the entry
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::updateParamEntry(const char *key, const char *value)
{
    m_tempMap.replaceValueFor(String8(key), String8(value));
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : commitParamChanges
 *
 * DESCRIPTION: commit all changes in local temp map obj into parameter obj
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::commitParamChanges()
{
    size_t size = m_tempMap.size();
    for (size_t i = 0; i < size; i++) {
        String8 k, v;
        k = m_tempMap.keyAt(i);
        v = m_tempMap.valueAt(i);
        set(k, v);
    }
    m_tempMap.clear();

    // update local changes
    m_bRecordingHint = m_bRecordingHint_new;
    m_bZslMode = m_bZslMode_new;

    /* After applying scene mode auto,
      Camera effects need to be reapplied */
    if ( m_bSceneTransitionAuto ) {
        m_bUpdateEffects = true;
        m_bSceneTransitionAuto = false;
    }


    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : QCameraReprocScaleParam
 *
 * DESCRIPTION: constructor of QCameraReprocScaleParam
 *
 * PARAMETERS : none
 *
 * RETURN     : none
 *==========================================================================*/
QCameraParameters::QCameraReprocScaleParam::QCameraReprocScaleParam()
  : mScaleEnabled(false),
    mIsUnderScaling(false),
    mNeedScaleCnt(0),
    mSensorSizeTblCnt(0),
    mSensorSizeTbl(NULL),
    mTotalSizeTblCnt(0)
{
    mPicSizeFromAPK.width = 0;
    mPicSizeFromAPK.height = 0;
    mPicSizeSetted.width = 0;
    mPicSizeSetted.height = 0;
    memset(mNeedScaledSizeTbl, 0, sizeof(mNeedScaledSizeTbl));
    memset(mTotalSizeTbl, 0, sizeof(mTotalSizeTbl));
}

/*===========================================================================
 * FUNCTION   : ~~QCameraReprocScaleParam
 *
 * DESCRIPTION: destructor of QCameraReprocScaleParam
 *
 * PARAMETERS : none
 *
 * RETURN     : none
 *==========================================================================*/
QCameraParameters::QCameraReprocScaleParam::~QCameraReprocScaleParam()
{
    //do nothing now.
}

/*===========================================================================
 * FUNCTION   : setScaledSizeTbl
 *
 * DESCRIPTION: re-set picture size table with dimensions that need scaling if Reproc Scale is enabled
 *
 * PARAMETERS :
 *   @scale_cnt   : count of picture sizes that want scale
 *   @scale_tbl    : picture size table that want scale
 *   @org_cnt     : sensor supported picture size count
 *   @org_tbl      : sensor supported picture size table
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::QCameraReprocScaleParam::setScaleSizeTbl(size_t scale_cnt,
        cam_dimension_t *scale_tbl, size_t org_cnt, cam_dimension_t *org_tbl)
{
    int32_t rc = NO_ERROR;
    size_t i;
    mNeedScaleCnt = 0;

    if(!mScaleEnabled || scale_cnt <=0 || scale_tbl == NULL || org_cnt <=0 || org_tbl == NULL){
        return BAD_VALUE;    // Do not need scale, so also need not reset picture size table
    }

    mSensorSizeTblCnt = org_cnt;
    mSensorSizeTbl = org_tbl;
    mNeedScaleCnt = checkScaleSizeTable(scale_cnt, scale_tbl, org_cnt, org_tbl);
    if(mNeedScaleCnt <= 0){
        LOGE("do not have picture sizes need scaling.");
        return BAD_VALUE;
    }

    if(mNeedScaleCnt + org_cnt > MAX_SIZES_CNT){
        LOGE("picture size list exceed the max count.");
        return BAD_VALUE;
    }

    //get the total picture size table
    mTotalSizeTblCnt = mNeedScaleCnt + org_cnt;

    if (mNeedScaleCnt > MAX_SCALE_SIZES_CNT) {
        LOGE("Error!! mNeedScaleCnt (%d) is more than MAX_SCALE_SIZES_CNT",
                 mNeedScaleCnt);
        return BAD_VALUE;
    }

    for(i = 0; i < mNeedScaleCnt; i++){
        mTotalSizeTbl[i].width = mNeedScaledSizeTbl[i].width;
        mTotalSizeTbl[i].height = mNeedScaledSizeTbl[i].height;
        LOGH("scale picture size: i =%d, width=%d, height=%d.",
            i, mTotalSizeTbl[i].width, mTotalSizeTbl[i].height);
    }
    for(; i < mTotalSizeTblCnt; i++){
        mTotalSizeTbl[i].width = org_tbl[i-mNeedScaleCnt].width;
        mTotalSizeTbl[i].height = org_tbl[i-mNeedScaleCnt].height;
        LOGH("sensor supportted picture size: i =%d, width=%d, height=%d.",
            i, mTotalSizeTbl[i].width, mTotalSizeTbl[i].height);
    }
    return rc;
}

/*===========================================================================
 * FUNCTION   : getScaledSizeTblCnt
 *
 * DESCRIPTION: get picture size cnt that need scale
 *
 * PARAMETERS : none
 *
 * RETURN     : uint8_t type of picture size count
 *==========================================================================*/
size_t QCameraParameters::QCameraReprocScaleParam::getScaleSizeTblCnt()
{
    return mNeedScaleCnt;
}

/*===========================================================================
 * FUNCTION   : getScaledSizeTbl
 *
 * DESCRIPTION: get picture size table that need scale
 *
 * PARAMETERS :  none
 *
 * RETURN     : cam_dimension_t list of picture size table
 *==========================================================================*/
cam_dimension_t *QCameraParameters::QCameraReprocScaleParam::getScaledSizeTbl()
{
    if(!mScaleEnabled)
        return NULL;

    return mNeedScaledSizeTbl;
}

/*===========================================================================
 * FUNCTION   : setScaleEnable
 *
 * DESCRIPTION: enable or disable Reproc Scale
 *
 * PARAMETERS :
 *   @enabled : enable: 1; disable 0
 *
 * RETURN     : none
 *==========================================================================*/
void QCameraParameters::QCameraReprocScaleParam::setScaleEnable(bool enabled)
{
    mScaleEnabled = enabled;
}

/*===========================================================================
 * FUNCTION   : isScaleEnabled
 *
 * DESCRIPTION: check if Reproc Scale is enabled
 *
 * PARAMETERS :  none
 *
 * RETURN     : bool type of status
 *==========================================================================*/
bool QCameraParameters::QCameraReprocScaleParam::isScaleEnabled()
{
    return mScaleEnabled;
}

/*===========================================================================
 * FUNCTION   : isScalePicSize
 *
 * DESCRIPTION: check if current picture size is from Scale Table
 *
 * PARAMETERS :
 *   @width     : current picture width
 *   @height    : current picture height
 *
 * RETURN     : bool type of status
 *==========================================================================*/
bool QCameraParameters::QCameraReprocScaleParam::isScalePicSize(int width, int height)
{
    //Check if the picture size is in scale table
    if(mNeedScaleCnt <= 0)
        return FALSE;

    for (size_t i = 0; i < mNeedScaleCnt; i++) {
        if ((mNeedScaledSizeTbl[i].width == width) && (mNeedScaledSizeTbl[i].height == height)) {
            //found match
            return TRUE;
        }
    }

    LOGE("Not in scale picture size table.");
    return FALSE;
}

/*===========================================================================
 * FUNCTION   : isValidatePicSize
 *
 * DESCRIPTION: check if current picture size is validate
 *
 * PARAMETERS :
 *   @width     : current picture width
 *   @height    : current picture height
 *
 * RETURN     : bool type of status
 *==========================================================================*/
bool QCameraParameters::QCameraReprocScaleParam::isValidatePicSize(int width, int height)
{
    size_t i = 0;

    for(i = 0; i < mSensorSizeTblCnt; i++){
        if(mSensorSizeTbl[i].width == width
            && mSensorSizeTbl[i].height== height){
            return TRUE;
        }
    }

    for(i = 0; i < mNeedScaleCnt; i++){
        if(mNeedScaledSizeTbl[i].width == width
            && mNeedScaledSizeTbl[i].height== height){
            return TRUE;
        }
    }

    LOGE("Invalidate input picture size.");
    return FALSE;
}

/*===========================================================================
 * FUNCTION   : setSensorSupportedPicSize
 *
 * DESCRIPTION: set sensor supported picture size.
 *    For Snapshot stream size configuration, we need use sensor supported size.
 *    We will use CPP to do Scaling based on output Snapshot stream.
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::QCameraReprocScaleParam::setSensorSupportedPicSize()
{
    //will find a suitable picture size (here we leave a prossibility to add other scale requirement)
    //Currently we only focus on upscaling, and checkScaleSizeTable() has guaranteed the dimension ratio.

    if(!mIsUnderScaling || mSensorSizeTblCnt <= 0)
        return BAD_VALUE;

    //We just get the max sensor supported size here.
    mPicSizeSetted.width = mSensorSizeTbl[0].width;
    mPicSizeSetted.height = mSensorSizeTbl[0].height;

    return NO_ERROR;
}


/*===========================================================================
 * FUNCTION   : setValidatePicSize
 *
 * DESCRIPTION: set sensor supported size and change scale status.
 *
 * PARAMETERS :
 *   @width    : input picture width
 *   @height   : input picture height
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::QCameraReprocScaleParam::setValidatePicSize(int &width,int &height)
{
    if(!mScaleEnabled)
        return BAD_VALUE;

    mIsUnderScaling = FALSE; //default: not under scale

    if(isScalePicSize(width, height)){
        // input picture size need scaling operation. Record size from APK and setted
        mIsUnderScaling = TRUE;
        mPicSizeFromAPK.width = width;
        mPicSizeFromAPK.height = height;

        if(setSensorSupportedPicSize() != NO_ERROR)
            return BAD_VALUE;

        //re-set picture size to sensor supported size
        width = mPicSizeSetted.width;
        height = mPicSizeSetted.height;
        LOGH("mPicSizeFromAPK- with=%d, height=%d, mPicSizeSetted- with =%d, height=%d.",
             mPicSizeFromAPK.width, mPicSizeFromAPK.height, mPicSizeSetted.width, mPicSizeSetted.height);
    }else{
        mIsUnderScaling = FALSE;
        //no scale is needed for input picture size
        if(!isValidatePicSize(width, height)){
            LOGE("invalidate input picture size.");
            return BAD_VALUE;
        }
        mPicSizeSetted.width = width;
        mPicSizeSetted.height = height;
    }

    LOGH("X. mIsUnderScaling=%d, width=%d, height=%d.", mIsUnderScaling, width, height);
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : getPicSizeFromAPK
 *
 * DESCRIPTION: get picture size that get from APK
 *
 * PARAMETERS :
 *   @width     : input width
 *   @height    : input height
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::QCameraReprocScaleParam::getPicSizeFromAPK(int &width, int &height)
{
    if(!mIsUnderScaling)
        return BAD_VALUE;

    width = mPicSizeFromAPK.width;
    height = mPicSizeFromAPK.height;
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : getPicSizeSetted
 *
 * DESCRIPTION: get picture size that setted into mm-camera
 *
 * PARAMETERS :
 *   @width     : input width
 *   @height    : input height
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::QCameraReprocScaleParam::getPicSizeSetted(int &width, int &height)
{
    width = mPicSizeSetted.width;
    height = mPicSizeSetted.height;
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : isUnderScaling
 *
 * DESCRIPTION: check if we are in Reproc Scaling requirment
 *
 * PARAMETERS :  none
 *
 * RETURN     : bool type of status
 *==========================================================================*/
bool QCameraParameters::QCameraReprocScaleParam::isUnderScaling()
{
    return mIsUnderScaling;
}

/*===========================================================================
 * FUNCTION   : checkScaleSizeTable
 *
 * DESCRIPTION: check PICTURE_SIZE_NEED_SCALE to choose
 *
 * PARAMETERS :
 *   @scale_cnt   : count of picture sizes that want scale
 *   @scale_tbl    : picture size table that want scale
 *   @org_cnt     : sensor supported picture size count
 *   @org_tbl      : sensor supported picture size table
 *
 * RETURN     : bool type of status
 *==========================================================================*/
size_t QCameraParameters::QCameraReprocScaleParam::checkScaleSizeTable(size_t scale_cnt,
        cam_dimension_t *scale_tbl, size_t org_cnt, cam_dimension_t *org_tbl)
{
    size_t stbl_cnt = 0;
    size_t temp_cnt = 0;
    ssize_t i = 0;
    if(scale_cnt <=0 || scale_tbl == NULL || org_tbl == NULL || org_cnt <= 0)
        return stbl_cnt;

    //get validate scale size table. Currently we only support:
    // 1. upscale. The scale size must larger than max sensor supported size
    // 2. Scale dimension ratio must be same as the max sensor supported size.
    temp_cnt = scale_cnt;
    for (i = (ssize_t)(scale_cnt - 1); i >= 0; i--) {
        if (scale_tbl[i].width > org_tbl[0].width ||
                (scale_tbl[i].width == org_tbl[0].width &&
                    scale_tbl[i].height > org_tbl[0].height)) {
            //get the smallest scale size
            break;
        }
        temp_cnt--;
    }

    //check dimension ratio
    double supported_ratio = (double)org_tbl[0].width / (double)org_tbl[0].height;
    for (i = 0; i < (ssize_t)temp_cnt; i++) {
        double cur_ratio = (double)scale_tbl[i].width / (double)scale_tbl[i].height;
        if (fabs(supported_ratio - cur_ratio) > ASPECT_TOLERANCE) {
            continue;
        }
        mNeedScaledSizeTbl[stbl_cnt].width = scale_tbl[i].width;
        mNeedScaledSizeTbl[stbl_cnt].height= scale_tbl[i].height;
        stbl_cnt++;
    }

    return stbl_cnt;
}

/*===========================================================================
 * FUNCTION   : getTotalSizeTblCnt
 *
 * DESCRIPTION: get total picture size count after adding dimensions that need scaling
 *
 * PARAMETERS : none
 *
 * RETURN     : uint8_t type of picture size count
 *==========================================================================*/
size_t QCameraParameters::QCameraReprocScaleParam::getTotalSizeTblCnt()
{
    return mTotalSizeTblCnt;
}

/*===========================================================================
 * FUNCTION   : getTotalSizeTbl
 *
 * DESCRIPTION: get picture size table after adding dimensions that need scaling
 *
 * PARAMETERS :  none
 *
 * RETURN     : cam_dimension_t list of picture size table
 *==========================================================================*/
cam_dimension_t *QCameraParameters::QCameraReprocScaleParam::getTotalSizeTbl()
{
    if(!mScaleEnabled)
        return NULL;

    return mTotalSizeTbl;
}

/*===========================================================================
 * FUNCTION   : setEztune
 *
 * DESCRIPTION: Enable/Disable EZtune
 *
 *==========================================================================*/
int32_t QCameraParameters::setEztune()
{
    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));
    property_get("persist.camera.eztune.enable", prop, "0");
    m_bEztuneEnabled = atoi(prop);
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : isHDREnabled
 *
 * DESCRIPTION: if HDR is enabled
 *
 * PARAMETERS : none
 *
 * RETURN     : true: needed
 *              false: no need
 *==========================================================================*/
bool QCameraParameters::isHDREnabled()
{
    return ((m_bHDREnabled || m_HDRSceneEnabled));
}

/*===========================================================================
 * FUNCTION   : isAVTimerEnabled
 *
 * DESCRIPTION: if AVTimer is enabled
 *
 * PARAMETERS : none
 *
 * RETURN     : true: needed
 *              false: no need
 *==========================================================================*/
bool QCameraParameters::isAVTimerEnabled()
{
    return m_bAVTimerEnabled;
}

/*===========================================================================
* FUNCTION   : isDISEnabled
*
* DESCRIPTION: if DIS is enabled
*
* PARAMETERS : none
*
* RETURN    : true: needed
*               false: no need
*==========================================================================*/
bool QCameraParameters::isDISEnabled()
{
    return m_bDISEnabled;
}

/*===========================================================================
* FUNCTION   : getISType
*
* DESCRIPTION: returns IS type
*
* PARAMETERS : none
*
* RETURN     : IS type
*
*==========================================================================*/
cam_is_type_t QCameraParameters::getISType()
{
    return mIsType;
}

/*===========================================================================
 * FUNCTION   : MobicatMask
 *
 * DESCRIPTION: returns mobicat mask
 *
 * PARAMETERS : none
 *
 * RETURN     : mobicat mask
 *
 *==========================================================================*/
uint8_t QCameraParameters::getMobicatMask()
{
    return m_MobiMask;
}

/*===========================================================================
 * FUNCTION   : sendStreamConfigInfo
 *
 * DESCRIPTION: send Stream config info.
 *
 * PARAMETERS :
 *   @stream_config_info: Stream config information
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
bool QCameraParameters::sendStreamConfigInfo(cam_stream_size_info_t &stream_config_info) {
    int32_t rc = NO_ERROR;
    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
            CAM_INTF_META_STREAM_INFO, stream_config_info)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to set stream info parm");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : setStreamConfigure
 *
 * DESCRIPTION: set stream type, stream dimension for all configured streams.
 *
 * PARAMETERS :
 *   @isCapture: Whether this configureation is for an image capture
 *   @previewAsPostview: Use preview as postview
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
bool QCameraParameters::setStreamConfigure(bool isCapture,
        bool previewAsPostview, bool resetConfig) {

    int32_t rc = NO_ERROR;
    cam_stream_size_info_t stream_config_info;
    char value[PROPERTY_VALUE_MAX];
    bool raw_yuv = false;
    bool raw_capture = false;

    if ( m_pParamBuf == NULL ) {
        return NO_INIT;
    }

    memset(&stream_config_info, 0, sizeof(stream_config_info));
    stream_config_info.num_streams = 0;

    if (resetConfig) {
        LOGH("Reset stream config!!");
        rc = sendStreamConfigInfo(stream_config_info);
        LOGH("Done Resetting stream config!!");
        return rc;
    }

    stream_config_info.hfr_mode       = static_cast<cam_hfr_mode_t>(mHfrMode);
    stream_config_info.buf_alignment  = m_pCapability->buf_alignment;
    stream_config_info.min_stride     = m_pCapability->min_stride;
    stream_config_info.min_scanline   = m_pCapability->min_scanline;
    stream_config_info.batch_size = getBufBatchCount();

    property_get("persist.camera.raw_yuv", value, "0");
    raw_yuv = atoi(value) > 0 ? true : false;

    if (isZSLMode() && getRecordingHintValue() != true) {
        stream_config_info.type[stream_config_info.num_streams] =
            CAM_STREAM_TYPE_PREVIEW;
        getStreamDimension(CAM_STREAM_TYPE_PREVIEW,
                stream_config_info.stream_sizes[stream_config_info.num_streams]);
        updatePpFeatureMask(CAM_STREAM_TYPE_PREVIEW);
        stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                mStreamPpMask[CAM_STREAM_TYPE_PREVIEW];
        getStreamFormat(CAM_STREAM_TYPE_PREVIEW,
                stream_config_info.format[stream_config_info.num_streams]);
        stream_config_info.num_streams++;

        stream_config_info.type[stream_config_info.num_streams] =
                CAM_STREAM_TYPE_ANALYSIS;
        getStreamDimension(CAM_STREAM_TYPE_ANALYSIS,
                stream_config_info.stream_sizes[stream_config_info.num_streams]);
        updatePpFeatureMask(CAM_STREAM_TYPE_ANALYSIS);
        stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                mStreamPpMask[CAM_STREAM_TYPE_ANALYSIS];
        getStreamFormat(CAM_STREAM_TYPE_ANALYSIS,
                stream_config_info.format[stream_config_info.num_streams]);
        stream_config_info.num_streams++;

        stream_config_info.type[stream_config_info.num_streams] =
                CAM_STREAM_TYPE_SNAPSHOT;
        getStreamDimension(CAM_STREAM_TYPE_SNAPSHOT,
                stream_config_info.stream_sizes[stream_config_info.num_streams]);
        updatePpFeatureMask(CAM_STREAM_TYPE_SNAPSHOT);
        stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                mStreamPpMask[CAM_STREAM_TYPE_SNAPSHOT];
        getStreamFormat(CAM_STREAM_TYPE_SNAPSHOT,
                stream_config_info.format[stream_config_info.num_streams]);
        stream_config_info.num_streams++;

        if (isUBWCEnabled() && getRecordingHintValue() != true) {
            cam_format_t fmt;
            getStreamFormat(CAM_STREAM_TYPE_PREVIEW,fmt);
            if (fmt == CAM_FORMAT_YUV_420_NV12_UBWC) {
                stream_config_info.type[stream_config_info.num_streams] =
                        CAM_STREAM_TYPE_CALLBACK;
                getStreamDimension(CAM_STREAM_TYPE_CALLBACK,
                        stream_config_info.stream_sizes[stream_config_info.num_streams]);
                updatePpFeatureMask(CAM_STREAM_TYPE_CALLBACK);
                stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                        mStreamPpMask[CAM_STREAM_TYPE_CALLBACK];
                getStreamFormat(CAM_STREAM_TYPE_CALLBACK,
                        stream_config_info.format[stream_config_info.num_streams]);
                stream_config_info.num_streams++;
            }
        }

    } else if (!isCapture) {
        if (m_bRecordingHint) {
            if (m_bDISEnabled) {
                char value[PROPERTY_VALUE_MAX];
                // Make default value for IS_TYPE as IS_TYPE_EIS_2_0
                property_get("persist.camera.is_type", value, "4");
                mIsType = static_cast<cam_is_type_t>(atoi(value));
            } else {
                mIsType = IS_TYPE_NONE;
            }
            stream_config_info.is_type = mIsType;
            stream_config_info.type[stream_config_info.num_streams] =
                    CAM_STREAM_TYPE_SNAPSHOT;
            getStreamDimension(CAM_STREAM_TYPE_SNAPSHOT,
                    stream_config_info.stream_sizes[stream_config_info.num_streams]);
            updatePpFeatureMask(CAM_STREAM_TYPE_SNAPSHOT);
            stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                    mStreamPpMask[CAM_STREAM_TYPE_SNAPSHOT];
            getStreamFormat(CAM_STREAM_TYPE_SNAPSHOT,
                        stream_config_info.format[stream_config_info.num_streams]);
            stream_config_info.num_streams++;

            stream_config_info.type[stream_config_info.num_streams] =
                    CAM_STREAM_TYPE_VIDEO;
            getStreamDimension(CAM_STREAM_TYPE_VIDEO,
                    stream_config_info.stream_sizes[stream_config_info.num_streams]);
            updatePpFeatureMask(CAM_STREAM_TYPE_VIDEO);
            stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                    mStreamPpMask[CAM_STREAM_TYPE_VIDEO];
            getStreamFormat(CAM_STREAM_TYPE_VIDEO,
                    stream_config_info.format[stream_config_info.num_streams]);
            stream_config_info.num_streams++;
        }

        /* Analysis stream is needed by DCRF regardless of recording hint */
        if ((getDcrf() == true) ||
                (getRecordingHintValue() != true) ||
                (fdModeInVideo())) {
            stream_config_info.type[stream_config_info.num_streams] =
                    CAM_STREAM_TYPE_ANALYSIS;
            getStreamDimension(CAM_STREAM_TYPE_ANALYSIS,
                    stream_config_info.stream_sizes[stream_config_info.num_streams]);
            updatePpFeatureMask(CAM_STREAM_TYPE_ANALYSIS);
            stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                    mStreamPpMask[CAM_STREAM_TYPE_ANALYSIS];
            getStreamFormat(CAM_STREAM_TYPE_ANALYSIS,
                    stream_config_info.format[stream_config_info.num_streams]);
            stream_config_info.num_streams++;
        }

        stream_config_info.type[stream_config_info.num_streams] =
                CAM_STREAM_TYPE_PREVIEW;
        getStreamDimension(CAM_STREAM_TYPE_PREVIEW,
                stream_config_info.stream_sizes[stream_config_info.num_streams]);
        updatePpFeatureMask(CAM_STREAM_TYPE_PREVIEW);
        stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                mStreamPpMask[CAM_STREAM_TYPE_PREVIEW];
        getStreamFormat(CAM_STREAM_TYPE_PREVIEW,
                    stream_config_info.format[stream_config_info.num_streams]);
        stream_config_info.num_streams++;

        if (isUBWCEnabled() && getRecordingHintValue() != true) {
            cam_format_t fmt;
            getStreamFormat(CAM_STREAM_TYPE_PREVIEW,fmt);
            if (fmt == CAM_FORMAT_YUV_420_NV12_UBWC) {
                stream_config_info.type[stream_config_info.num_streams] =
                        CAM_STREAM_TYPE_CALLBACK;
                getStreamDimension(CAM_STREAM_TYPE_CALLBACK,
                        stream_config_info.stream_sizes[stream_config_info.num_streams]);
                updatePpFeatureMask(CAM_STREAM_TYPE_CALLBACK);
                stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                        mStreamPpMask[CAM_STREAM_TYPE_CALLBACK];
                getStreamFormat(CAM_STREAM_TYPE_CALLBACK,
                        stream_config_info.format[stream_config_info.num_streams]);
                stream_config_info.num_streams++;
            }
        }

    } else {
        if (isJpegPictureFormat() || isNV16PictureFormat() || isNV21PictureFormat()) {
            if (!getofflineRAW()) {
                stream_config_info.type[stream_config_info.num_streams] =
                        CAM_STREAM_TYPE_SNAPSHOT;
                getStreamDimension(CAM_STREAM_TYPE_SNAPSHOT,
                        stream_config_info.stream_sizes[stream_config_info.num_streams]);
                updatePpFeatureMask(CAM_STREAM_TYPE_SNAPSHOT);
                stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                        mStreamPpMask[CAM_STREAM_TYPE_SNAPSHOT];
                getStreamFormat(CAM_STREAM_TYPE_SNAPSHOT,
                        stream_config_info.format[stream_config_info.num_streams]);
                stream_config_info.num_streams++;
            }

            if (previewAsPostview) {
                stream_config_info.type[stream_config_info.num_streams] =
                        CAM_STREAM_TYPE_PREVIEW;
                getStreamDimension(CAM_STREAM_TYPE_PREVIEW,
                        stream_config_info.stream_sizes[stream_config_info.num_streams]);
                updatePpFeatureMask(CAM_STREAM_TYPE_PREVIEW);
                stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                        mStreamPpMask[CAM_STREAM_TYPE_PREVIEW];
                getStreamFormat(CAM_STREAM_TYPE_PREVIEW,
                        stream_config_info.format[stream_config_info.num_streams]);
                stream_config_info.num_streams++;
            } else {
                stream_config_info.type[stream_config_info.num_streams] =
                        CAM_STREAM_TYPE_POSTVIEW;
                getStreamDimension(CAM_STREAM_TYPE_POSTVIEW,
                        stream_config_info.stream_sizes[stream_config_info.num_streams]);
                updatePpFeatureMask(CAM_STREAM_TYPE_POSTVIEW);
                stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                        mStreamPpMask[CAM_STREAM_TYPE_POSTVIEW];
                getStreamFormat(CAM_STREAM_TYPE_POSTVIEW,
                        stream_config_info.format[stream_config_info.num_streams]);
                stream_config_info.num_streams++;
            }
        } else {
            raw_capture = true;
            stream_config_info.type[stream_config_info.num_streams] =
                    CAM_STREAM_TYPE_RAW;
            getStreamDimension(CAM_STREAM_TYPE_RAW,
                    stream_config_info.stream_sizes[stream_config_info.num_streams]);
            updatePpFeatureMask(CAM_STREAM_TYPE_RAW);
            stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                    mStreamPpMask[CAM_STREAM_TYPE_RAW];
            getStreamFormat(CAM_STREAM_TYPE_RAW,
                    stream_config_info.format[stream_config_info.num_streams]);
            stream_config_info.num_streams++;
        }
    }

    if ((!raw_capture) && ((getofflineRAW() && !getRecordingHintValue())
            || (raw_yuv))) {
        cam_dimension_t max_dim = {0,0};
        // Find the Maximum dimension admong all the streams
        for (uint32_t j = 0; j < stream_config_info.num_streams; j++) {
            if (stream_config_info.stream_sizes[j].width > max_dim.width) {
                max_dim.width = stream_config_info.stream_sizes[j].width;
            }
            if (stream_config_info.stream_sizes[j].height > max_dim.height) {
                max_dim.height = stream_config_info.stream_sizes[j].height;
            }
        }
        LOGH("Max Dimension = %d X %d", max_dim.width, max_dim.height);
        updateRAW(max_dim);
        stream_config_info.type[stream_config_info.num_streams] =
                CAM_STREAM_TYPE_RAW;
        getStreamDimension(CAM_STREAM_TYPE_RAW,
                stream_config_info.stream_sizes[stream_config_info.num_streams]);
        updatePpFeatureMask(CAM_STREAM_TYPE_RAW);
        stream_config_info.postprocess_mask[stream_config_info.num_streams] =
                mStreamPpMask[CAM_STREAM_TYPE_RAW];
        getStreamFormat(CAM_STREAM_TYPE_RAW,
                stream_config_info.format[stream_config_info.num_streams]);
        stream_config_info.num_streams++;
    }
    for (uint32_t k = 0; k < stream_config_info.num_streams; k++) {
        LOGI("STREAM INFO : type %d, wxh: %d x %d, pp_mask: 0x%llx Format = %d",
                stream_config_info.type[k],
                stream_config_info.stream_sizes[k].width,
                stream_config_info.stream_sizes[k].height,
                stream_config_info.postprocess_mask[k],
                stream_config_info.format[k]);
    }

    rc = sendStreamConfigInfo(stream_config_info);
    return rc;
}

/*===========================================================================
 * FUNCTION   : addOnlineRotation
 *
 * DESCRIPTION: send additional rotation information for specific stream
 *
 * PARAMETERS :
 *   @rotation: rotation
 *   @streamId: internal stream id
 *   @device_rotation: device rotation
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::addOnlineRotation(uint32_t rotation, uint32_t streamId,
        int32_t device_rotation)
{
    int32_t rc = NO_ERROR;
    cam_rotation_info_t rotation_info;
    memset(&rotation_info, 0, sizeof(cam_rotation_info_t));

    /* Add jpeg rotation information */
    if (rotation == 0) {
        rotation_info.rotation = ROTATE_0;
    } else if (rotation == 90) {
        rotation_info.rotation = ROTATE_90;
    } else if (rotation == 180) {
        rotation_info.rotation = ROTATE_180;
    } else if (rotation == 270) {
        rotation_info.rotation = ROTATE_270;
    } else {
        rotation_info.rotation = ROTATE_0;
    }
    rotation_info.streamId = streamId;

    /* Add device rotation information */
    if (device_rotation == 0) {
        rotation_info.device_rotation = ROTATE_0;
    } else if (device_rotation == 90) {
        rotation_info.device_rotation = ROTATE_90;
    } else if (device_rotation == 180) {
        rotation_info.device_rotation = ROTATE_180;
    } else if (device_rotation == 270) {
        rotation_info.device_rotation = ROTATE_270;
    } else {
        rotation_info.device_rotation = ROTATE_0;
    }

    if(initBatchUpdate(m_pParamBuf) < 0 ) {
        LOGE("Failed to initialize group update table");
        return BAD_TYPE;
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_ROTATION, rotation_info)) {
        LOGE("Failed to update table");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if (rc != NO_ERROR) {
        LOGE("Failed to set stream info parm");
        return rc;
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : needThumbnailReprocess
 *
 * DESCRIPTION: Check if thumbnail reprocessing is needed
 *
 * PARAMETERS : @pFeatureMask - feature mask
 *
 * RETURN     : true: needed
 *              false: no need
 *==========================================================================*/
bool QCameraParameters::needThumbnailReprocess(cam_feature_mask_t *pFeatureMask)
{
    if (isUbiFocusEnabled() || isChromaFlashEnabled() ||
            isOptiZoomEnabled() || isUbiRefocus() ||
            isStillMoreEnabled() ||
            (isHDREnabled() && !isHDRThumbnailProcessNeeded())
            || isUBWCEnabled()) {
        *pFeatureMask &= ~CAM_QCOM_FEATURE_CHROMA_FLASH;
        *pFeatureMask &= ~CAM_QCOM_FEATURE_UBIFOCUS;
        *pFeatureMask &= ~CAM_QCOM_FEATURE_REFOCUS;
        *pFeatureMask &= ~CAM_QCOM_FEATURE_OPTIZOOM;
        *pFeatureMask &= ~CAM_QCOM_FEATURE_STILLMORE;
        *pFeatureMask &= ~CAM_QCOM_FEATURE_HDR;
        return false;
    } else {
        cam_dimension_t thumb_dim;
        getThumbnailSize(&(thumb_dim.width), &(thumb_dim.height));
        if (thumb_dim.width == 0 || thumb_dim.height == 0) {
            return false;
        }
        else {
            return true;
        }
    }
}

/*===========================================================================
 * FUNCTION   : getNumOfExtraBuffersForImageProc
 *
 * DESCRIPTION: get number of extra input buffers needed by image processing
 *
 * PARAMETERS : none
 *
 * RETURN     : number of extra buffers needed by ImageProc;
 *              0 if not ImageProc enabled
 *==========================================================================*/
uint8_t QCameraParameters::getNumOfExtraBuffersForImageProc()
{
    int numOfBufs = 0;

    if (isUbiRefocus()) {
        return (uint8_t)(m_pCapability->refocus_af_bracketing_need.burst_count - 1);
    } else if (isUbiFocusEnabled()) {
        numOfBufs += m_pCapability->ubifocus_af_bracketing_need.burst_count - 1;
    } else if (m_bOptiZoomOn) {
        numOfBufs += m_pCapability->opti_zoom_settings_need.burst_count - 1;
    } else if (isChromaFlashEnabled()) {
        numOfBufs += m_pCapability->chroma_flash_settings_need.burst_count - 1;
    } else if (isStillMoreEnabled()) {
        if (isSeeMoreEnabled()) {
            m_stillmore_config.burst_count = 1;
        } else if ((m_stillmore_config.burst_count >=
                m_pCapability->stillmore_settings_need.min_burst_count) &&
                (m_stillmore_config.burst_count <=
                m_pCapability->stillmore_settings_need.max_burst_count)) {
            numOfBufs += m_stillmore_config.burst_count - 1;
        } else {
            numOfBufs += m_pCapability->stillmore_settings_need.burst_count - 1;
        }
    } else if (isOEMFeatEnabled()) {
        numOfBufs += 1;
    }

    return (uint8_t)(numOfBufs);
}

/*===========================================================================
 * FUNCTION   : getExifBufIndex
 *
 * DESCRIPTION: get index of metadata to be used for EXIF
 *
 * PARAMETERS : @captureIndex - index of current captured frame
 *
 * RETURN     : index of metadata to be used for EXIF
 *==========================================================================*/
uint32_t QCameraParameters::getExifBufIndex(uint32_t captureIndex)
{
    uint32_t index = captureIndex;

    if (isUbiRefocus()) {
        if (captureIndex < m_pCapability->refocus_af_bracketing_need.burst_count) {
            index = captureIndex;
        } else {
            index = 0;
        }
    } else if (isChromaFlashEnabled()) {
        index = m_pCapability->chroma_flash_settings_need.metadata_index;
    } else if (isHDREnabled()) {
        if (isHDR1xFrameEnabled() && isHDR1xExtraBufferNeeded()) {
            index = m_pCapability->hdr_bracketing_setting.num_frames;
        } else {
            for (index = 0; index < m_pCapability->hdr_bracketing_setting.num_frames; index++) {
                if (0 == m_pCapability->hdr_bracketing_setting.exp_val.values[index]) {
                    break;
                }
            }
            if (index == m_pCapability->hdr_bracketing_setting.num_frames) {
                index = captureIndex;
            }
        }
    }

    return index;
}

/*===========================================================================
 * FUNCTION   : getNumberInBufsForSingleShot
 *
 * DESCRIPTION: get number of input buffers for single shot
 *
 * PARAMETERS : none
 *
 * RETURN     : number of input buffers for single shot
 *==========================================================================*/
uint32_t QCameraParameters::getNumberInBufsForSingleShot()
{
    uint32_t numOfBufs = 1;

    if (isUbiRefocus()) {
        numOfBufs = m_pCapability->refocus_af_bracketing_need.burst_count;
    } else if (isUbiFocusEnabled()) {
        numOfBufs = m_pCapability->ubifocus_af_bracketing_need.burst_count;
    } else if (m_bOptiZoomOn) {
        numOfBufs = m_pCapability->opti_zoom_settings_need.burst_count;
    } else if (isChromaFlashEnabled()) {
        numOfBufs = m_pCapability->chroma_flash_settings_need.burst_count;
    } else if (isHDREnabled()) {
        numOfBufs = m_pCapability->hdr_bracketing_setting.num_frames;
        if (isHDR1xFrameEnabled() && isHDR1xExtraBufferNeeded()) {
            numOfBufs++;
        }
    } else if (isStillMoreEnabled()) {
        if (isSeeMoreEnabled()) {
            m_stillmore_config.burst_count = 1;
            numOfBufs = m_stillmore_config.burst_count;
        } else if ((m_stillmore_config.burst_count >=
                m_pCapability->stillmore_settings_need.min_burst_count) &&
                (m_stillmore_config.burst_count <=
                m_pCapability->stillmore_settings_need.max_burst_count)) {
            numOfBufs = m_stillmore_config.burst_count;
        } else {
            numOfBufs = m_pCapability->stillmore_settings_need.burst_count;
        }
    }

    return numOfBufs;
}

/*===========================================================================
 * FUNCTION   : getNumberOutBufsForSingleShot
 *
 * DESCRIPTION: get number of output buffers for single shot
 *
 * PARAMETERS : none
 *
 * RETURN     : number of output buffers for single shot
 *==========================================================================*/
uint32_t QCameraParameters::getNumberOutBufsForSingleShot()
{
    uint32_t numOfBufs = 1;

    if (isUbiRefocus()) {
        numOfBufs = m_pCapability->refocus_af_bracketing_need.output_count;
    } else if (isHDREnabled()) {
        if (isHDR1xFrameEnabled()) {
            numOfBufs++;
        }
    }

    return numOfBufs;
}

/*===========================================================================
 * FUNCTION   : is4k2kVideoResolution
 *
 * DESCRIPTION: if resolution is 4k x 2k or true 4k x 2k
 *
 * PARAMETERS : none
 *
 * RETURN     : true: video resolution is 4k x 2k
 *              false: video resolution is not 4k x 2k
 *==========================================================================*/
bool QCameraParameters::is4k2kVideoResolution()
{
   bool enabled = false;
   cam_dimension_t resolution;
   getVideoSize(&resolution.width, &resolution.height);
   if (!(resolution.width < 3840 && resolution.height < 2160)) {
      enabled = true;
   }

   return enabled;
}

/*===========================================================================
 * FUNCTION   : isPreviewSeeMoreRequired
 *
 * DESCRIPTION: This function checks whether SeeMmore(SW TNR) needs to be applied for
 *              preview stream depending on video resoluion and setprop
 *
 * PARAMETERS : none
 *
 * RETURN     : true: If SeeMore needs to apply
 *              false: No need to apply
 *==========================================================================*/
bool QCameraParameters::isPreviewSeeMoreRequired()
{
   cam_dimension_t dim;
   char prop[PROPERTY_VALUE_MAX];

   getVideoSize(&dim.width, &dim.height);
   memset(prop, 0, sizeof(prop));
   property_get("persist.camera.preview.seemore", prop, "0");
   int enable = atoi(prop);

   // Enable SeeMore for preview stream if :
   // 1. Video resolution <= (1920x1080)  (or)
   // 2. persist.camera.preview.seemore is set
   LOGD("width=%d, height=%d, enable=%d", dim.width, dim.height, enable);
   return (((dim.width * dim.height) <= (1920 * 1080)) || enable);
}

/*===========================================================================
 * FUNCTION   : updateDebugLevel
 *
 * DESCRIPTION: send CAM_INTF_PARM_UPDATE_DEBUG_LEVEL to backend
 *
 * PARAMETERS : none
 *
 * RETURN     : NO_ERROR --success
 *              int32_t type of status
 *==========================================================================*/
int32_t QCameraParameters::updateDebugLevel()
{
    if ( m_pParamBuf == NULL ) {
        return NO_INIT;
    }

    int32_t rc = initBatchUpdate(m_pParamBuf);
    if ( rc != NO_ERROR ) {
        LOGE("Failed to initialize group update table");
        return rc;
    }

    uint32_t dummyDebugLevel = 0;
    /* The value of dummyDebugLevel is irrelavent. On
     * CAM_INTF_PARM_UPDATE_DEBUG_LEVEL, read debug property */
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_UPDATE_DEBUG_LEVEL, dummyDebugLevel)) {
        LOGE("Parameters batch failed");
        return BAD_VALUE;
    }

    rc = commitSetBatch();
    if ( rc != NO_ERROR ) {
        LOGE("Failed to commit batch parameters");
        return rc;
    }

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setOfflineRAW
 *
 * DESCRIPTION: Function to decide Offline RAW feature.
 *
 * PARAMETERS :
 *  @raw_value: offline raw value to set.
 *
 * RETURN     : none
 *==========================================================================*/
void QCameraParameters::setOfflineRAW(bool raw_value)
{
    char value[PROPERTY_VALUE_MAX];
    bool raw_yuv = false;
    bool offlineRaw = false;

    if (raw_value) {
        mOfflineRAW = true;
        LOGH("Offline Raw  %d", mOfflineRAW);
        return;
    }

    property_get("persist.camera.raw_yuv", value, "0");
    raw_yuv = atoi(value) > 0 ? true : false;
    property_get("persist.camera.offlineraw", value, "0");
    offlineRaw = atoi(value) > 0 ? true : false;
    if ((raw_yuv || isRdiMode()) && offlineRaw) {
        mOfflineRAW = true;
    } else {
        mOfflineRAW = false;
    }
    LOGH("Offline Raw  %d", mOfflineRAW);
}

/*===========================================================================
 * FUNCTION   : updatePpFeatureMask
 *
 * DESCRIPTION: Updates the feature mask for a particular stream depending
 *              on current client configuration.
 *
 * PARAMETERS :
 *  @stream_type: Camera stream type
 *
 * RETURN     : NO_ERROR --success
 *              int32_t type of status
 *==========================================================================*/
int32_t QCameraParameters::updatePpFeatureMask(cam_stream_type_t stream_type) {

    cam_feature_mask_t feature_mask = 0;

    if (stream_type >= CAM_STREAM_TYPE_MAX) {
        LOGE("Error!! stream type: %d not valid", stream_type);
        return -1;
    }

    // Update feature mask for SeeMore in video and video preview
    if (isSeeMoreEnabled() && ((stream_type == CAM_STREAM_TYPE_VIDEO) ||
            (stream_type == CAM_STREAM_TYPE_PREVIEW && getRecordingHintValue() &&
            isPreviewSeeMoreRequired()))) {
       feature_mask |= CAM_QCOM_FEATURE_LLVD;
    }

    if (isHighQualityNoiseReductionMode() &&
            ((stream_type == CAM_STREAM_TYPE_VIDEO) ||
            (stream_type == CAM_STREAM_TYPE_PREVIEW && getRecordingHintValue() &&
            isPreviewSeeMoreRequired()))) {
        feature_mask |= CAM_QTI_FEATURE_SW_TNR;
    }

    // Do not enable feature mask for ZSL/non-ZSL/liveshot snapshot except for 4K2k case
    if ((getRecordingHintValue() &&
            (stream_type == CAM_STREAM_TYPE_SNAPSHOT) && is4k2kVideoResolution()) ||
            (stream_type != CAM_STREAM_TYPE_SNAPSHOT)) {
        if ((m_nMinRequiredPpMask & CAM_QCOM_FEATURE_SHARPNESS) &&
                !isOptiZoomEnabled()) {
            feature_mask |= CAM_QCOM_FEATURE_SHARPNESS;
        }

        if (m_nMinRequiredPpMask & CAM_QCOM_FEATURE_EFFECT) {
            feature_mask |= CAM_QCOM_FEATURE_EFFECT;
        }
        if (isWNREnabled()) {
            feature_mask |= CAM_QCOM_FEATURE_DENOISE2D;
        }

        //Set flip mode based on Stream type;
        int flipMode = getFlipMode(stream_type);
        if (flipMode > 0) {
            feature_mask |= CAM_QCOM_FEATURE_FLIP;
        }
    }

    if ((isTNRVideoEnabled() && (CAM_STREAM_TYPE_VIDEO == stream_type))
            || (isTNRPreviewEnabled() && (CAM_STREAM_TYPE_PREVIEW == stream_type))) {
        feature_mask |= CAM_QCOM_FEATURE_CPP_TNR;
    }
    if (isEztuneEnabled() &&
            ((CAM_STREAM_TYPE_PREVIEW == stream_type) ||
            (CAM_STREAM_TYPE_SNAPSHOT == stream_type))) {
        feature_mask |= CAM_QCOM_FEATURE_EZTUNE;
    }

    if ((getCDSMode() != CAM_CDS_MODE_OFF) &&
            ((CAM_STREAM_TYPE_PREVIEW == stream_type) ||
            (CAM_STREAM_TYPE_VIDEO == stream_type) ||
            (CAM_STREAM_TYPE_CALLBACK == stream_type) ||
            ((CAM_STREAM_TYPE_SNAPSHOT == stream_type) &&
            getRecordingHintValue() && is4k2kVideoResolution()))) {
         if (m_nMinRequiredPpMask & CAM_QCOM_FEATURE_DSDN) {
             feature_mask |= CAM_QCOM_FEATURE_DSDN;
         } else {
             feature_mask |= CAM_QCOM_FEATURE_CDS;
         }
    }

    if (isTNRSnapshotEnabled() && (CAM_STREAM_TYPE_SNAPSHOT == stream_type)
            && (isZSLMode() || getRecordingHintValue())) {
        feature_mask |= CAM_QCOM_FEATURE_CPP_TNR;
    }

    //Rotation could also have an effect on pp feature mask
    cam_pp_feature_config_t config;
    cam_dimension_t dim;
    memset(&config, 0, sizeof(cam_pp_feature_config_t));
    getStreamRotation(stream_type, config, dim);
    feature_mask |= config.feature_mask;

    // Dual Camera scenarios
    // all feature masks are disabled for preview and analysis streams for aux session
    // all required feature masks for aux session preview and analysis streams need
    // to be enabled explicitly here
    ///@note When aux camera is of bayer type, keep pp mask as is or we'd run
    ///      into stream mapping problems. YUV sensor is marked as interleaved and has
    ///      preferred mapping setup so we don't see any mapping issues.
    if (m_relCamSyncInfo.sync_control == CAM_SYNC_RELATED_SENSORS_ON) {
        if (((CAM_STREAM_TYPE_ANALYSIS == stream_type) ||
                (CAM_STREAM_TYPE_PREVIEW == stream_type)) &&
                (m_relCamSyncInfo.mode == CAM_MODE_SECONDARY) &&
                (m_pCapability->sensor_type.sens_type == CAM_SENSOR_YUV)) {
            LOGH("Disabling all pp feature masks for aux preview and "
                    "analysis streams");
            feature_mask = 0;
        }

        // all feature masks need to be enabled here
        // enable DCRF feature mask on analysis stream in case of dual camera
        if (m_bDcrfEnabled && (CAM_STREAM_TYPE_ANALYSIS == stream_type)) {
            feature_mask |= CAM_QCOM_FEATURE_DCRF;
        } else {
            feature_mask &= ~CAM_QCOM_FEATURE_DCRF;
        }
    }

    // Preview assisted autofocus needs to be supported for
    // callback, preview, or video streams
    switch (stream_type) {
    case CAM_STREAM_TYPE_CALLBACK:
    case CAM_STREAM_TYPE_PREVIEW:
    case CAM_STREAM_TYPE_VIDEO:
        feature_mask |= CAM_QCOM_FEATURE_PAAF;
        break;
    default:
        break;
    }

    // Store stream feature mask
    setStreamPpMask(stream_type, feature_mask);
    LOGH("stream type: %d, pp_mask: 0x%llx", stream_type, feature_mask);

    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setStreamPpMask
 *
 * DESCRIPTION: Stores a particular feature mask for a given camera stream
 *
 * PARAMETERS :
 *  @stream_type: Camera stream type
 *  @pp_mask  : Feature mask
 *
 * RETURN     : NO_ERROR --success
 *              int32_t type of status
 *==========================================================================*/
int32_t QCameraParameters::setStreamPpMask(cam_stream_type_t stream_type,
        cam_feature_mask_t pp_mask) {

    if(stream_type >= CAM_STREAM_TYPE_MAX) {
        return BAD_TYPE;
    }

    mStreamPpMask[stream_type] = pp_mask;
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : getStreamPpMask
 *
 * DESCRIPTION: Retrieves the feature mask for a given camera stream
 *
 * PARAMETERS :
 *  @stream_type: Camera stream type
 *  @pp_mask  : Feature mask
 *
 * RETURN     : NO_ERROR --success
 *              int32_t type of status
 *==========================================================================*/
int32_t QCameraParameters::getStreamPpMask(cam_stream_type_t stream_type,
        cam_feature_mask_t &pp_mask) {

    if(stream_type >= CAM_STREAM_TYPE_MAX) {
        return BAD_TYPE;
    }

    pp_mask = mStreamPpMask[stream_type];
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : isMultiPassReprocessing
 *
 * DESCRIPTION: Read setprop to enable/disable multipass
 *
 * PARAMETERS : none
 *
 * RETURN     : TRUE  -- If enabled
 *              FALSE  -- disabled
 *==========================================================================*/
bool QCameraParameters::isMultiPassReprocessing()
{
    char value[PROPERTY_VALUE_MAX];
    int multpass = 0;

    property_get("persist.camera.multi_pass", value, "0");
    multpass = atoi(value);

    return (multpass == 0)? FALSE : TRUE;
}

/*===========================================================================
 * FUNCTION   : setReprocCount
 *
 * DESCRIPTION: Set total reprocessing pass count
 *
 * PARAMETERS : none
 *
 * RETURN     : None
 *==========================================================================*/
void QCameraParameters::setReprocCount()
{
    mTotalPPCount = 1; //Default reprocessing Pass count

    if (getManualCaptureMode() >=
            CAM_MANUAL_CAPTURE_TYPE_3) {
        LOGD("Additional post processing enabled for manual capture");
        mTotalPPCount++;
    }

    if (!isMultiPassReprocessing()) {
        return;
    }

    if ((getZoomLevel() != 0)
            && (getBurstCountForAdvancedCapture()
            == getNumOfSnapshots())) {
        LOGD("2 Pass postprocessing enabled");
        mTotalPPCount++;
    }
}

/*===========================================================================
 * FUNCTION   : isUBWCEnabled
 *
 * DESCRIPTION: Function to get UBWC hardware support.
 *
 * PARAMETERS : None
 *
 * RETURN     : TRUE -- UBWC format supported
 *              FALSE -- UBWC is not supported.
 *==========================================================================*/
bool QCameraParameters::isUBWCEnabled()
{
#ifdef UBWC_PRESENT
    char value[PROPERTY_VALUE_MAX];
    int prop_value = 0;
    memset(value, 0, sizeof(value));
    property_get("debug.gralloc.gfx_ubwc_disable", value, "0");
    prop_value = atoi(value);
    if (prop_value) {
        return FALSE;
    }

    //Disable UBWC if it is YUV sensor.
    if ((m_pCapability != NULL) &&
            (m_pCapability->sensor_type.sens_type == CAM_SENSOR_YUV)) {
        return FALSE;
    }

    //Disable UBWC if Eztune is enabled
    // Eztune works on CPP output and cannot understand UBWC buffer.
    memset(value, 0, sizeof(value));
    property_get("persist.camera.eztune.enable", value, "0");
    prop_value = atoi(value);
    if (prop_value) {
        return FALSE;
    }
    return TRUE;
#else
    return FALSE;
#endif
}

/*===========================================================================
 * FUNCTION   : isPostProcScaling
 *
 * DESCRIPTION: is scaling to be done by CPP?
 *
 * PARAMETERS : none
 *
 * RETURN     : TRUE  : If CPP scaling enabled
 *              FALSE : If VFE scaling enabled
 *==========================================================================*/
bool QCameraParameters::isPostProcScaling()
{
    char value[PROPERTY_VALUE_MAX];
    bool cpp_scaling = FALSE;

    if (getRecordingHintValue()) {
        return FALSE;
    }

    property_get("persist.camera.pp_scaling", value, "0");
    cpp_scaling = atoi(value) > 0 ? TRUE : FALSE;

    LOGH("Post proc scaling enabled : %d",
             cpp_scaling);
    return cpp_scaling;
}

/*===========================================================================
 * FUNCTION   : isLLNoiseEnabled
 *
 * DESCRIPTION: Low light noise change
 *
 * PARAMETERS : none
 *
 * RETURN     : TRUE  : If low light noise enabled
 *              FALSE : If low light noise disabled
 *==========================================================================*/
bool QCameraParameters::isLLNoiseEnabled()
{
    char value[PROPERTY_VALUE_MAX];
    bool llnoise = FALSE;

    if (!isWNREnabled()) {
        return FALSE;
    }

    property_get("persist.camera.llnoise", value, "0");
    llnoise = atoi(value) > 0 ? TRUE : FALSE;

    LOGH("Low light noise enabled : %d",
             llnoise);
    return llnoise;
}

/*===========================================================================
 * FUNCTION   : setBufBatchCount
 *
 * DESCRIPTION: Function to configure batch buffer
 *
 * PARAMETERS : int8_t buf_cnt
 *                     Buffer batch count
 *
 * RETURN     :  None
 *==========================================================================*/
void QCameraParameters::setBufBatchCount(int8_t buf_cnt)
{
    mBufBatchCnt = 0;
    char value[PROPERTY_VALUE_MAX];
    int8_t count = 0;

    property_get("persist.camera.batchcount", value, "0");
    count = atoi(value);

    if (!(count != 0 || buf_cnt > CAMERA_MIN_BATCH_COUNT)) {
        LOGH("Buffer batch count = %d", mBufBatchCnt);
        set(KEY_QC_VIDEO_BATCH_SIZE, mBufBatchCnt);
        return;
    }

    while((m_pCapability->max_batch_bufs_supported != 0)
            && (m_pCapability->max_batch_bufs_supported < buf_cnt)) {
        buf_cnt = buf_cnt / 2;
    }

    if (count > 0) {
        mBufBatchCnt = count;
        LOGH("Buffer batch count = %d", mBufBatchCnt);
        set(KEY_QC_VIDEO_BATCH_SIZE, mBufBatchCnt);
        return;
    }

    if (buf_cnt > CAMERA_MIN_BATCH_COUNT) {
        mBufBatchCnt = buf_cnt;
        LOGH("Buffer batch count = %d", mBufBatchCnt);
        set(KEY_QC_VIDEO_BATCH_SIZE, mBufBatchCnt);
        return;
    }
}

/*===========================================================================
 * FUNCTION   : setVideoBatch()
 *
 * DESCRIPTION: Function to batching for video.
 *
 * PARAMETERS : none
 *
 * RETURN     :  None
 *==========================================================================*/
void QCameraParameters::setVideoBatchSize()
{
    char value[PROPERTY_VALUE_MAX];
    int8_t minBatchcnt = 2; //Batching enabled only if batch size if greater than 2;
    int32_t width = 0, height = 0;
    mVideoBatchSize = 0;

    if (getBufBatchCount()) {
        //We don't need HAL to HAL batching if camera batching enabled.
        return;
    }

    getVideoSize(&width, &height);
    if ((width > 1920) || (height > 1080)) {
        //Cannot enable batch mode for video size bigger than 1080p
        return;
    }

    //Batch size "6" is the recommended and gives optimal power saving.
    property_get("persist.camera.video.batchsize", value, "0");
    mVideoBatchSize = atoi(value);

    if (mVideoBatchSize > CAMERA_MAX_CONSUMER_BATCH_BUFFER_SIZE) {
        mVideoBatchSize = CAMERA_MAX_CONSUMER_BATCH_BUFFER_SIZE;
    } else if (mVideoBatchSize <= minBatchcnt) {
        //Batching enabled only if batch size is greater than 2.
        mVideoBatchSize = 0;
    }
    LOGD("mVideoBatchSize = %d", mVideoBatchSize);
    set(KEY_QC_VIDEO_BATCH_SIZE, mVideoBatchSize);
}

/*===========================================================================
 * FUNCTION   : setCustomParams
 *
 * DESCRIPTION: Function to update OEM specific custom parameter
 *
 * PARAMETERS : params: Input Parameter object
 *
 * RETURN     :  error value
 *==========================================================================*/
int32_t QCameraParameters::setCustomParams(__unused const QCameraParameters& params)
{
    int32_t rc = NO_ERROR;

    /* Application specific parameter can be read from "params" and update m_pParamBuf
       We can also update internal OEM custom parameters in this funcion.
       "CAM_CUSTOM_PARM_EXAMPLE" is used as a example */

    /*Get the pointer of shared buffer for custom parameter*/
    custom_parm_buffer_t *customParam =
            (custom_parm_buffer_t *)POINTER_OF_META(CAM_INTF_PARM_CUSTOM, m_pParamBuf);


    /*start updating custom parameter values*/
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(customParam, CAM_CUSTOM_PARM_EXAMPLE, 1)) {
        LOGE("Failed to update CAM_CUSTOM_PARM_DUMMY");
        return BAD_VALUE;
    }

    /*set custom parameter values to main parameter buffer. Update isvalid flag*/
    ADD_GET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_CUSTOM);

    return rc;
}

/*===========================================================================
 * FUNCTION   : dump
 *
 * DESCRIPTION: Composes a string based on current configuration
 *
 * PARAMETERS : none
 *
 * RETURN     : Formatted string
 *==========================================================================*/
String8 QCameraParameters::dump()
{
    String8 str("\n");
    char s[128];

    snprintf(s, 128, "Preview Pixel Fmt: %d\n", getPreviewHalPixelFormat());
    str += s;

    snprintf(s, 128, "ZSL Burst Interval: %d\n", getZSLBurstInterval());
    str += s;

    snprintf(s, 128, "ZSL Queue Depth: %d\n", getZSLQueueDepth());
    str += s;

    snprintf(s, 128, "ZSL Back Look Count %d\n", getZSLBackLookCount());
    str += s;

    snprintf(s, 128, "Max Unmatched Frames In Queue: %d\n",
        getMaxUnmatchedFramesInQueue());
    str += s;

    snprintf(s, 128, "Is ZSL Mode: %d\n", isZSLMode());
    str += s;

    snprintf(s, 128, "Is No Display Mode: %d\n", isNoDisplayMode());
    str += s;

    snprintf(s, 128, "Is WNR Enabled: %d\n", isWNREnabled());
    str += s;

    snprintf(s, 128, "isHfrMode: %d\n", isHfrMode());
    str += s;

    snprintf(s, 128, "getNumOfSnapshots: %d\n", getNumOfSnapshots());
    str += s;

    snprintf(s, 128, "getNumOfExtraHDRInBufsIfNeeded: %d\n",
        getNumOfExtraHDRInBufsIfNeeded());
    str += s;

    snprintf(s, 128, "getNumOfExtraHDROutBufsIfNeeded: %d\n",
        getNumOfExtraHDROutBufsIfNeeded());
    str += s;

    snprintf(s, 128, "getRecordingHintValue: %d\n", getRecordingHintValue());
    str += s;

    snprintf(s, 128, "getJpegQuality: %u\n", getJpegQuality());
    str += s;

    snprintf(s, 128, "getJpegRotation: %u\n", getJpegRotation());
    str += s;

    snprintf(s, 128, "isHistogramEnabled: %d\n", isHistogramEnabled());
    str += s;

    snprintf(s, 128, "isFaceDetectionEnabled: %d\n", isFaceDetectionEnabled());
    str += s;

    snprintf(s, 128, "isHDREnabled: %d\n", isHDREnabled());
    str += s;

    snprintf(s, 128, "isAutoHDREnabled: %d\n", isAutoHDREnabled());
    str += s;

    snprintf(s, 128, "isAVTimerEnabled: %d\n", isAVTimerEnabled());
    str += s;

    snprintf(s, 128, "getFocusMode: %d\n", getFocusMode());
    str += s;

    snprintf(s, 128, "isJpegPictureFormat: %d\n", isJpegPictureFormat());
    str += s;

    snprintf(s, 128, "isNV16PictureFormat: %d\n", isNV16PictureFormat());
    str += s;

    snprintf(s, 128, "isNV21PictureFormat: %d\n", isNV21PictureFormat());
    str += s;

    snprintf(s, 128, "isSnapshotFDNeeded: %d\n", isSnapshotFDNeeded());
    str += s;

    snprintf(s, 128, "isHDR1xFrameEnabled: %d\n", isHDR1xFrameEnabled());
    str += s;

    snprintf(s, 128, "isYUVFrameInfoNeeded: %d\n", isYUVFrameInfoNeeded());
    str += s;

    snprintf(s, 128, "isHDR1xExtraBufferNeeded: %d\n",
        isHDR1xExtraBufferNeeded());
    str += s;

    snprintf(s, 128, "isHDROutputCropEnabled: %d\n", isHDROutputCropEnabled());
    str += s;

    snprintf(s, 128, "isPreviewFlipChanged: %d\n", isPreviewFlipChanged());
    str += s;

    snprintf(s, 128, "isVideoFlipChanged: %d\n", isVideoFlipChanged());
    str += s;

    snprintf(s, 128, "isSnapshotFlipChanged: %d\n", isSnapshotFlipChanged());
    str += s;

    snprintf(s, 128, "isHDRThumbnailProcessNeeded: %d\n",
        isHDRThumbnailProcessNeeded());
    str += s;

    snprintf(s, 128, "getAutoFlickerMode: %d\n", getAutoFlickerMode());
    str += s;

    snprintf(s, 128, "getNumOfExtraBuffersForImageProc: %d\n",
        getNumOfExtraBuffersForImageProc());
    str += s;

    snprintf(s, 128, "isUbiFocusEnabled: %d\n", isUbiFocusEnabled());
    str += s;

    snprintf(s, 128, "isChromaFlashEnabled: %d\n", isChromaFlashEnabled());
    str += s;

    snprintf(s, 128, "isOptiZoomEnabled: %d\n", isOptiZoomEnabled());
    str += s;

    snprintf(s, 128, "isStillMoreEnabled: %d\n", isStillMoreEnabled());
    str += s;

    snprintf(s, 128, "getBurstCountForAdvancedCapture: %d\n",
        getBurstCountForAdvancedCapture());
    str += s;

    return str;
}

/*===========================================================================
 * FUNCTION   : getNumOfExtraBuffersForVideo
 *
 * DESCRIPTION: get number of extra buffers needed by image processing
 *
 * PARAMETERS : none
 *
 * RETURN     : number of extra buffers needed by ImageProc;
 *              0 if not ImageProc enabled
 *==========================================================================*/
uint8_t QCameraParameters::getNumOfExtraBuffersForVideo()
{
    uint8_t numOfBufs = 0;

    if (isSeeMoreEnabled() || isHighQualityNoiseReductionMode()) {
        numOfBufs = 1;
    }

    return numOfBufs;
}

/*===========================================================================
 * FUNCTION   : getNumOfExtraBuffersForPreview
 *
 * DESCRIPTION: get number of extra buffers needed by image processing
 *
 * PARAMETERS : none
 *
 * RETURN     : number of extra buffers needed by ImageProc;
 *              0 if not ImageProc enabled
 *==========================================================================*/
uint8_t QCameraParameters::getNumOfExtraBuffersForPreview()
{
    uint8_t numOfBufs = 0;

    if ((isSeeMoreEnabled() || isHighQualityNoiseReductionMode())
            && !isZSLMode() && getRecordingHintValue()) {
        numOfBufs = 1;
    }

    return numOfBufs;
}

/*===========================================================================
 * FUNCTION   : setToneMapMode
 *
 * DESCRIPTION: enable or disable tone map
 *
 * PARAMETERS :
 *   @enable : enable: 1; disable 0
 *   @initCommit: if configuration list needs to be initialized and commited
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setToneMapMode(uint32_t enable, bool initCommit)
{
    int32_t rc = NO_ERROR;
    LOGH("tone map mode %d ", enable);

    if (initCommit) {
        if (initBatchUpdate(m_pParamBuf) < 0) {
            LOGE("Failed to initialize group update table");
            return FAILED_TRANSACTION;
        }
    }

    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_TONE_MAP_MODE, enable)) {
        LOGE("Failed to update tone map mode");
        return BAD_VALUE;
    }

    if (initCommit) {
        rc = commitSetBatch();
        if (rc != NO_ERROR) {
            LOGE("Failed to commit tone map mode");
            return rc;
        }
    }

    return rc;
}

/*===========================================================================
 * FUNCTION   : getLongshotStages
 *
 * DESCRIPTION: get number of stages for longshot
 *
 * PARAMETERS : none
 *
 * RETURN     : number of stages
 *==========================================================================*/
uint8_t QCameraParameters::getLongshotStages()
{
    uint8_t numStages =
            isLowMemoryDevice() ? CAMERA_MIN_LONGSHOT_STAGES : CAMERA_DEFAULT_LONGSHOT_STAGES;

    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));
    property_get("persist.camera.longshot.stages", prop, "0");
    uint8_t propStages = atoi(prop);
    if (propStages > 0 && propStages <= CAMERA_DEFAULT_LONGSHOT_STAGES) {
        numStages = propStages;
    }
    return numStages;
}

/*===========================================================================
 * FUNCTION   : setCDSMode
 *
 * DESCRIPTION: set CDS mode
 *
 * PARAMETERS :
 *   @cds_mode : cds mode
 *   @initCommit: if configuration list needs to be initialized and commited
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setCDSMode(int32_t cds_mode, bool initCommit)
{
    if (initCommit) {
        if (initBatchUpdate(m_pParamBuf) < 0) {
            LOGE("Failed to initialize group update table");
            return FAILED_TRANSACTION;
        }
    }

    int32_t rc = NO_ERROR;
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_CDS_MODE, cds_mode)) {
        LOGE("Failed to update cds mode");
        return BAD_VALUE;
    }

    if (initCommit) {
        rc = commitSetBatch();
        if (NO_ERROR != rc) {
            LOGE("Failed to set cds mode");
            return rc;
        }
    }

    LOGH("cds mode -> %d", cds_mode);

    return rc;
}

/*===========================================================================
 * FUNCTION   : setLowLightCapture
 *
 * DESCRIPTION: Function to enable low light capture
 *==========================================================================*/
void QCameraParameters::setLowLightCapture()
{
    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, sizeof(prop));
    property_get("persist.camera.llc", prop, "0");
    m_LLCaptureEnabled = (atoi(prop) > 0) ? TRUE : FALSE;

    if (!m_LLCaptureEnabled) {
        m_LowLightLevel = CAM_LOW_LIGHT_OFF;
    }
}

/*===========================================================================
 * FUNCTION   : fdModeInVideo
 *
 * DESCRIPTION: FD in Video change
 *
 * PARAMETERS : none
 *
 * RETURN     : FD Mode in Video
 *              0 : If FD in Video disabled
 *              1 : If FD in Video enabled for Detection, focus
 *              2 : If FD in Video enabled only for focus
 *==========================================================================*/
uint8_t QCameraParameters::fdModeInVideo()
{
    char value[PROPERTY_VALUE_MAX];
    uint8_t fdvideo = 0;

    cam_analysis_info_t *pAnalysisInfo =
            &m_pCapability->analysis_info[CAM_ANALYSIS_INFO_FD_VIDEO];

    if (!pAnalysisInfo->hw_analysis_supported) {
        return 0;
    }

    property_get("persist.camera.fdvideo", value, "0");
    fdvideo = (atoi(value) > 0) ? atoi(value) : 0;

    LOGD("FD mode in Video : %d", fdvideo);
    return fdvideo;
}

/*===========================================================================
 * FUNCTION   : setManualCaptureMode
 *
 * DESCRIPTION: Function to set Manual capture modes
 *
 * PARAMETERS :
 *   @mode : Capture mode configured
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setManualCaptureMode(QCameraManualCaptureModes mode)
{
    int32_t rc = NO_ERROR;
    char value[PROPERTY_VALUE_MAX];
    int8_t count = 0;

    property_get("persist.camera.manual.capture", value, "0");
    count = atoi(value);

    if (count) {
        if (mode == CAM_MANUAL_CAPTURE_TYPE_OFF) {
            m_ManualCaptureMode = CAM_MANUAL_CAPTURE_TYPE_1;
        } else {
            m_ManualCaptureMode = mode;
        }
    } else {
        m_ManualCaptureMode = CAM_MANUAL_CAPTURE_TYPE_OFF;
    }

    if (m_ManualCaptureMode == CAM_MANUAL_CAPTURE_TYPE_2) {
        setOfflineRAW(FALSE);
    } else if (m_ManualCaptureMode >= CAM_MANUAL_CAPTURE_TYPE_3) {
        setOfflineRAW(TRUE);
    } else {
        setOfflineRAW(FALSE);
    }
    setReprocCount();
    LOGH("Manual capture mode - %d", m_ManualCaptureMode);
    return rc;
}

/*===========================================================================
 * FUNCTION   : isReprocScaleEnabled
 *
 * DESCRIPTION: Whether reprocess scale is enabled or not
 *
 * PARAMETERS : none
 *
 * RETURN     : TRUE  : Reprocess scale is enabled
 *              FALSE : Reprocess scale is not enabled
 *==========================================================================*/
bool QCameraParameters::isReprocScaleEnabled()
{
    return m_reprocScaleParam.isScaleEnabled();
}

/*===========================================================================
 * FUNCTION   : isUnderReprocScaling
 *
 * DESCRIPTION: Whether image is under reprocess scaling
 *
 * PARAMETERS : none
 *
 * RETURN     : TRUE  : Image is under reprocess scaling
 *              FALSE : Image is not under reprocess scaling
 *==========================================================================*/
bool QCameraParameters::isUnderReprocScaling()
{
    return m_reprocScaleParam.isUnderScaling();
}

/*===========================================================================
 * FUNCTION   : getPicSizeFromAPK
 *
 * DESCRIPTION: Get picture size set from application.
 *
 * PARAMETERS :
 *   @width   : with set by application
 *   @height  : height set by application
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getPicSizeFromAPK(int &width, int &height)
{
    return m_reprocScaleParam.getPicSizeFromAPK(width, height);
}


/*===========================================================================
 * FUNCTION   : setDualLedCalibration
 *
 * DESCRIPTION: set dual led calibration
 *
 * PARAMETERS :
 *   @params  : user setting parameters
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setDualLedCalibration(
        __unused const QCameraParameters& params)
{
    char value[PROPERTY_VALUE_MAX];
    int32_t calibration = 0;

    memset(value, 0, sizeof(value));
    property_get("persist.camera.dual_led_calib", value, "0");
    calibration = atoi(value);
    if (calibration != m_dualLedCalibration) {
      m_dualLedCalibration = calibration;
      LOGD("%s:updating calibration=%d m_dualLedCalibration=%d",
        __func__, calibration, m_dualLedCalibration);

      if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
               CAM_INTF_PARM_DUAL_LED_CALIBRATION,
               m_dualLedCalibration)) {
          LOGE("%s:Failed to update dual led calibration param", __func__);
          return BAD_VALUE;
      }
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : setinstantAEC
 *
 * DESCRIPTION: set instant AEC value to backend
 *
 * PARAMETERS :
 *   @value : instant aec enabled or not.
 *            0 - disable
 *            1 - Enable and set agressive AEC algo to the backend
 *            2 - Enable and set fast AEC algo to the backend
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setInstantAEC(uint8_t value, bool initCommit)
{
    if (initCommit) {
        if (initBatchUpdate(m_pParamBuf) < 0) {
            LOGE("Failed to initialize group update table");
            return FAILED_TRANSACTION;
        }
    }

    int32_t rc = NO_ERROR;
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf, CAM_INTF_PARM_INSTANT_AEC, value)) {
        LOGE("Failed to instant aec value");
        return BAD_VALUE;
    }

    // set the new value
    char val[8];
    snprintf(val, sizeof(val), "%d", value);
    updateParamEntry(KEY_QC_INSTANT_AEC, val);

    if (initCommit) {
        rc = commitSetBatch();
        if (NO_ERROR != rc) {
            LOGE("Failed to instant aec value");
            return rc;
        }
    }

    LOGD(" Instant AEC value set to backend %d", value);
    m_bInstantAEC = value;
    return rc;
}

/*===========================================================================
 * FUNCTION   : setAdvancedCaptureMode
 *
 * DESCRIPTION: set advanced capture mode
 *
 * PARAMETERS : none
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::setAdvancedCaptureMode()
{
    uint8_t value = isAdvCamFeaturesEnabled();
    LOGD("updating advanced capture mode value to %d",value);
    if (ADD_SET_PARAM_ENTRY_TO_BATCH(m_pParamBuf,
            CAM_INTF_PARM_ADV_CAPTURE_MODE, value)) {
        LOGE("Failed to set advanced capture mode param");
        return BAD_VALUE;
    }
    return NO_ERROR;
}

/*===========================================================================
 * FUNCTION   : getAnalysisInfo
 *
 * DESCRIPTION: Get the Analysis information based on
 *     current mode and feature mask
 *
 * PARAMETERS :
 *   @fdVideoEnabled : Whether fdVideo enabled currently
 *   @videoEnabled   : Whether hal3 or hal1
 *   @featureMask    : Feature mask
 *   @analysis_info  : Analysis info to be filled
 *
 * RETURN     : int32_t type of status
 *              NO_ERROR  -- success
 *              none-zero failure code
 *==========================================================================*/
int32_t QCameraParameters::getAnalysisInfo(
        bool fdVideoEnabled,
        bool hal3,
        uint32_t featureMask,
        cam_analysis_info_t *pAnalysisInfo)
{
    return mCommon.getAnalysisInfo(fdVideoEnabled, hal3, featureMask, pAnalysisInfo);
}

}; // namespace qcamera