blob: bee7855f632762b95e7871cd7ed033fe25f9313d [file] [log] [blame]
/*
* Copyright 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
//#define LOG_NDEBUG 0
#define LOG_TAG "V4L2Wrapper"
#include "v4l2_wrapper.h"
#include <algorithm>
#include <fcntl.h>
#include <limits>
#include <android-base/unique_fd.h>
#include <linux/videodev2.h>
#include <sys/stat.h>
#include <sys/types.h>
#include "arc/cached_frame.h"
namespace v4l2_camera_hal {
using arc::AllocatedFrameBuffer;
using arc::SupportedFormat;
using arc::SupportedFormats;
using default_camera_hal::CaptureRequest;
const int32_t kStandardSizes[][2] = {
{4096, 2160}, // 4KDCI (for USB camera)
{3840, 2160}, // 4KUHD (for USB camera)
{3280, 2464}, // 8MP
{2560, 1440}, // QHD
{1920, 1080}, // HD1080
{1640, 1232}, // 2MP
{1280, 720}, // HD
{1024, 768}, // XGA
{ 640, 480}, // VGA
{ 320, 240}, // QVGA
{ 176, 144} // QCIF
};
V4L2Wrapper* V4L2Wrapper::NewV4L2Wrapper(const std::string device_path) {
return new V4L2Wrapper(device_path);
}
V4L2Wrapper::V4L2Wrapper(const std::string device_path)
: device_path_(std::move(device_path)), connection_count_(0) {}
V4L2Wrapper::~V4L2Wrapper() {}
int V4L2Wrapper::Connect() {
HAL_LOG_ENTER();
std::lock_guard<std::mutex> lock(connection_lock_);
if (connected()) {
HAL_LOGV("Camera device %s is already connected.", device_path_.c_str());
++connection_count_;
return 0;
}
// Open in nonblocking mode (DQBUF may return EAGAIN).
int fd = TEMP_FAILURE_RETRY(open(device_path_.c_str(), O_RDWR | O_NONBLOCK));
if (fd < 0) {
HAL_LOGE("failed to open %s (%s)", device_path_.c_str(), strerror(errno));
return -ENODEV;
}
device_fd_.reset(fd);
++connection_count_;
// Check if this connection has the extended control query capability.
v4l2_query_ext_ctrl query;
query.id = V4L2_CTRL_FLAG_NEXT_CTRL | V4L2_CTRL_FLAG_NEXT_COMPOUND;
extended_query_supported_ = (IoctlLocked(VIDIOC_QUERY_EXT_CTRL, &query) == 0);
// TODO(b/29185945): confirm this is a supported device.
// This is checked by the HAL, but the device at device_path_ may
// not be the same one that was there when the HAL was loaded.
// (Alternatively, better hotplugging support may make this unecessary
// by disabling cameras that get disconnected and checking newly connected
// cameras, so Connect() is never called on an unsupported camera)
supported_formats_ = GetSupportedFormats();
qualified_formats_ = StreamFormat::GetQualifiedFormats(supported_formats_);
return 0;
}
void V4L2Wrapper::Disconnect() {
HAL_LOG_ENTER();
std::lock_guard<std::mutex> lock(connection_lock_);
if (connection_count_ == 0) {
// Not connected.
HAL_LOGE("Camera device %s is not connected, cannot disconnect.",
device_path_.c_str());
return;
}
--connection_count_;
if (connection_count_ > 0) {
HAL_LOGV("Disconnected from camera device %s. %d connections remain.",
device_path_.c_str(), connection_count_);
return;
}
device_fd_.reset(-1); // Includes close().
format_.reset();
{
std::lock_guard<std::mutex> buffer_lock(buffer_queue_lock_);
buffers_.clear();
}
}
// Helper function. Should be used instead of ioctl throughout this class.
template <typename T>
int V4L2Wrapper::IoctlLocked(unsigned long request, T data) {
// Potentially called so many times logging entry is a bad idea.
std::lock_guard<std::mutex> lock(device_lock_);
if (!connected()) {
HAL_LOGE("Device %s not connected.", device_path_.c_str());
return -ENODEV;
}
return TEMP_FAILURE_RETRY(ioctl(device_fd_.get(), request, data));
}
int V4L2Wrapper::StreamOn() {
if (!format_) {
HAL_LOGE("Stream format must be set before turning on stream.");
return -EINVAL;
}
int32_t type = format_->type();
if (IoctlLocked(VIDIOC_STREAMON, &type) < 0) {
HAL_LOGE("STREAMON fails (%d): %s", errno, strerror(errno));
return -ENODEV;
}
HAL_LOGV("Stream turned on.");
return 0;
}
int V4L2Wrapper::StreamOff() {
if (!format_) {
// Can't have turned on the stream without format being set,
// so nothing to turn off here.
return 0;
}
int32_t type = format_->type();
int res = IoctlLocked(VIDIOC_STREAMOFF, &type);
// Calling STREAMOFF releases all queued buffers back to the user.
// No buffers in flight.
if (res < 0) {
HAL_LOGE("STREAMOFF fails: %s", strerror(errno));
return -ENODEV;
}
std::lock_guard<std::mutex> lock(buffer_queue_lock_);
for (auto& buffer : buffers_) {
buffer.active = false;
buffer.request.reset();
}
HAL_LOGV("Stream turned off.");
return 0;
}
int V4L2Wrapper::QueryControl(uint32_t control_id,
v4l2_query_ext_ctrl* result) {
int res;
memset(result, 0, sizeof(*result));
if (extended_query_supported_) {
result->id = control_id;
res = IoctlLocked(VIDIOC_QUERY_EXT_CTRL, result);
// Assuming the operation was supported (not ENOTTY), no more to do.
if (errno != ENOTTY) {
if (res) {
HAL_LOGE("QUERY_EXT_CTRL fails: %s", strerror(errno));
return -ENODEV;
}
return 0;
}
}
// Extended control querying not supported, fall back to basic control query.
v4l2_queryctrl query;
query.id = control_id;
if (IoctlLocked(VIDIOC_QUERYCTRL, &query)) {
HAL_LOGE("QUERYCTRL fails: %s", strerror(errno));
return -ENODEV;
}
// Convert the basic result to the extended result.
result->id = query.id;
result->type = query.type;
memcpy(result->name, query.name, sizeof(query.name));
result->minimum = query.minimum;
if (query.type == V4L2_CTRL_TYPE_BITMASK) {
// According to the V4L2 documentation, when type is BITMASK,
// max and default should be interpreted as __u32. Practically,
// this means the conversion from 32 bit to 64 will pad with 0s not 1s.
result->maximum = static_cast<uint32_t>(query.maximum);
result->default_value = static_cast<uint32_t>(query.default_value);
} else {
result->maximum = query.maximum;
result->default_value = query.default_value;
}
result->step = static_cast<uint32_t>(query.step);
result->flags = query.flags;
result->elems = 1;
switch (result->type) {
case V4L2_CTRL_TYPE_INTEGER64:
result->elem_size = sizeof(int64_t);
break;
case V4L2_CTRL_TYPE_STRING:
result->elem_size = result->maximum + 1;
break;
default:
result->elem_size = sizeof(int32_t);
break;
}
return 0;
}
int V4L2Wrapper::GetControl(uint32_t control_id, int32_t* value) {
// For extended controls (any control class other than "user"),
// G_EXT_CTRL must be used instead of G_CTRL.
if (V4L2_CTRL_ID2CLASS(control_id) != V4L2_CTRL_CLASS_USER) {
v4l2_ext_control control;
v4l2_ext_controls controls;
memset(&control, 0, sizeof(control));
memset(&controls, 0, sizeof(controls));
control.id = control_id;
controls.ctrl_class = V4L2_CTRL_ID2CLASS(control_id);
controls.count = 1;
controls.controls = &control;
if (IoctlLocked(VIDIOC_G_EXT_CTRLS, &controls) < 0) {
HAL_LOGE("G_EXT_CTRLS fails: %s", strerror(errno));
return -ENODEV;
}
*value = control.value;
} else {
v4l2_control control{control_id, 0};
if (IoctlLocked(VIDIOC_G_CTRL, &control) < 0) {
HAL_LOGE("G_CTRL fails: %s", strerror(errno));
return -ENODEV;
}
*value = control.value;
}
return 0;
}
int V4L2Wrapper::SetControl(uint32_t control_id,
int32_t desired,
int32_t* result) {
int32_t result_value = 0;
// TODO(b/29334616): When async, this may need to check if the stream
// is on, and if so, lock it off while setting format. Need to look
// into if V4L2 supports adjusting controls while the stream is on.
// For extended controls (any control class other than "user"),
// S_EXT_CTRL must be used instead of S_CTRL.
if (V4L2_CTRL_ID2CLASS(control_id) != V4L2_CTRL_CLASS_USER) {
v4l2_ext_control control;
v4l2_ext_controls controls;
memset(&control, 0, sizeof(control));
memset(&controls, 0, sizeof(controls));
control.id = control_id;
control.value = desired;
controls.ctrl_class = V4L2_CTRL_ID2CLASS(control_id);
controls.count = 1;
controls.controls = &control;
if (IoctlLocked(VIDIOC_S_EXT_CTRLS, &controls) < 0) {
HAL_LOGE("S_EXT_CTRLS fails: %s", strerror(errno));
return -ENODEV;
}
result_value = control.value;
} else {
v4l2_control control{control_id, desired};
if (IoctlLocked(VIDIOC_S_CTRL, &control) < 0) {
HAL_LOGE("S_CTRL fails: %s", strerror(errno));
return -ENODEV;
}
result_value = control.value;
}
// If the caller wants to know the result, pass it back.
if (result != nullptr) {
*result = result_value;
}
return 0;
}
const SupportedFormats V4L2Wrapper::GetSupportedFormats() {
SupportedFormats formats;
std::set<uint32_t> pixel_formats;
int res = GetFormats(&pixel_formats);
if (res) {
HAL_LOGE("Failed to get device formats.");
return formats;
}
arc::SupportedFormat supported_format;
std::set<std::array<int32_t, 2>> frame_sizes;
for (auto pixel_format : pixel_formats) {
supported_format.fourcc = pixel_format;
frame_sizes.clear();
res = GetFormatFrameSizes(pixel_format, &frame_sizes);
if (res) {
HAL_LOGE("Failed to get frame sizes for format: 0x%x", pixel_format);
continue;
}
for (auto frame_size : frame_sizes) {
supported_format.width = frame_size[0];
supported_format.height = frame_size[1];
formats.push_back(supported_format);
}
}
return formats;
}
int V4L2Wrapper::GetFormats(std::set<uint32_t>* v4l2_formats) {
HAL_LOG_ENTER();
v4l2_fmtdesc format_query;
memset(&format_query, 0, sizeof(format_query));
// TODO(b/30000211): multiplanar support.
format_query.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
while (IoctlLocked(VIDIOC_ENUM_FMT, &format_query) >= 0) {
v4l2_formats->insert(format_query.pixelformat);
++format_query.index;
}
if (errno != EINVAL) {
HAL_LOGE(
"ENUM_FMT fails at index %d: %s", format_query.index, strerror(errno));
return -ENODEV;
}
return 0;
}
int V4L2Wrapper::GetQualifiedFormats(std::vector<uint32_t>* v4l2_formats) {
HAL_LOG_ENTER();
if (!connected()) {
HAL_LOGE(
"Device is not connected, qualified formats may not have been set.");
return -EINVAL;
}
v4l2_formats->clear();
std::set<uint32_t> unique_fourccs;
for (auto& format : qualified_formats_) {
unique_fourccs.insert(format.fourcc);
}
v4l2_formats->assign(unique_fourccs.begin(), unique_fourccs.end());
return 0;
}
int V4L2Wrapper::GetFormatFrameSizes(uint32_t v4l2_format,
std::set<std::array<int32_t, 2>>* sizes) {
v4l2_frmsizeenum size_query;
memset(&size_query, 0, sizeof(size_query));
size_query.pixel_format = v4l2_format;
if (IoctlLocked(VIDIOC_ENUM_FRAMESIZES, &size_query) < 0) {
HAL_LOGE("ENUM_FRAMESIZES failed: %s", strerror(errno));
return -ENODEV;
}
if (size_query.type == V4L2_FRMSIZE_TYPE_DISCRETE) {
// Discrete: enumerate all sizes using VIDIOC_ENUM_FRAMESIZES.
// Assuming that a driver with discrete frame sizes has a reasonable number
// of them.
do {
sizes->insert({{{static_cast<int32_t>(size_query.discrete.width),
static_cast<int32_t>(size_query.discrete.height)}}});
++size_query.index;
} while (IoctlLocked(VIDIOC_ENUM_FRAMESIZES, &size_query) >= 0);
if (errno != EINVAL) {
HAL_LOGE("ENUM_FRAMESIZES fails at index %d: %s",
size_query.index,
strerror(errno));
return -ENODEV;
}
} else {
// Continuous/Step-wise: based on the stepwise struct returned by the query.
// Fully listing all possible sizes, with large enough range/small enough
// step size, may produce far too many potential sizes. Instead, find the
// closest to a set of standard sizes.
for (const auto size : kStandardSizes) {
// Find the closest size, rounding up.
uint32_t desired_width = size[0];
uint32_t desired_height = size[1];
if (desired_width < size_query.stepwise.min_width ||
desired_height < size_query.stepwise.min_height) {
HAL_LOGV("Standard size %u x %u is too small for format %d",
desired_width,
desired_height,
v4l2_format);
continue;
} else if (desired_width > size_query.stepwise.max_width ||
desired_height > size_query.stepwise.max_height) {
HAL_LOGV("Standard size %u x %u is too big for format %d",
desired_width,
desired_height,
v4l2_format);
continue;
}
// Round up.
uint32_t width_steps = (desired_width - size_query.stepwise.min_width +
size_query.stepwise.step_width - 1) /
size_query.stepwise.step_width;
uint32_t height_steps = (desired_height - size_query.stepwise.min_height +
size_query.stepwise.step_height - 1) /
size_query.stepwise.step_height;
sizes->insert(
{{{static_cast<int32_t>(size_query.stepwise.min_width +
width_steps * size_query.stepwise.step_width),
static_cast<int32_t>(size_query.stepwise.min_height +
height_steps *
size_query.stepwise.step_height)}}});
}
}
return 0;
}
// Converts a v4l2_fract with units of seconds to an int64_t with units of ns.
inline int64_t FractToNs(const v4l2_fract& fract) {
return (1000000000LL * fract.numerator) / fract.denominator;
}
int V4L2Wrapper::GetFormatFrameDurationRange(
uint32_t v4l2_format,
const std::array<int32_t, 2>& size,
std::array<int64_t, 2>* duration_range) {
// Potentially called so many times logging entry is a bad idea.
v4l2_frmivalenum duration_query;
memset(&duration_query, 0, sizeof(duration_query));
duration_query.pixel_format = v4l2_format;
duration_query.width = size[0];
duration_query.height = size[1];
if (IoctlLocked(VIDIOC_ENUM_FRAMEINTERVALS, &duration_query) < 0) {
HAL_LOGE("ENUM_FRAMEINTERVALS failed: %s", strerror(errno));
return -ENODEV;
}
int64_t min = std::numeric_limits<int64_t>::max();
int64_t max = std::numeric_limits<int64_t>::min();
if (duration_query.type == V4L2_FRMSIZE_TYPE_DISCRETE) {
// Discrete: enumerate all durations using VIDIOC_ENUM_FRAMEINTERVALS.
do {
min = std::min(min, FractToNs(duration_query.discrete));
max = std::max(max, FractToNs(duration_query.discrete));
++duration_query.index;
} while (IoctlLocked(VIDIOC_ENUM_FRAMEINTERVALS, &duration_query) >= 0);
if (errno != EINVAL) {
HAL_LOGE("ENUM_FRAMEINTERVALS fails at index %d: %s",
duration_query.index,
strerror(errno));
return -ENODEV;
}
} else {
// Continuous/Step-wise: simply convert the given min and max.
min = FractToNs(duration_query.stepwise.min);
max = FractToNs(duration_query.stepwise.max);
}
(*duration_range)[0] = min;
(*duration_range)[1] = max;
return 0;
}
int V4L2Wrapper::SetFormat(const StreamFormat& desired_format,
uint32_t* result_max_buffers) {
HAL_LOG_ENTER();
if (format_ && desired_format == *format_) {
HAL_LOGV("Already in correct format, skipping format setting.");
*result_max_buffers = buffers_.size();
return 0;
}
if (format_) {
// If we had an old format, first request 0 buffers to inform the device
// we're no longer using any previously "allocated" buffers from the old
// format. This seems like it shouldn't be necessary for USERPTR memory,
// and/or should happen from turning the stream off, but the driver
// complained. May be a driver issue, or may be intended behavior.
int res = RequestBuffers(0);
if (res) {
return res;
}
}
// Select the matching format, or if not available, select a qualified format
// we can convert from.
SupportedFormat format;
if (!StreamFormat::FindBestFitFormat(supported_formats_, qualified_formats_,
desired_format.v4l2_pixel_format(),
desired_format.width(),
desired_format.height(), &format)) {
HAL_LOGE(
"Unable to find supported resolution in list, "
"width: %d, height: %d",
desired_format.width(), desired_format.height());
return -EINVAL;
}
// Set the camera to the new format.
v4l2_format new_format;
const StreamFormat resolved_format(format);
resolved_format.FillFormatRequest(&new_format);
// TODO(b/29334616): When async, this will need to check if the stream
// is on, and if so, lock it off while setting format.
if (IoctlLocked(VIDIOC_S_FMT, &new_format) < 0) {
HAL_LOGE("S_FMT failed: %s", strerror(errno));
return -ENODEV;
}
// Check that the driver actually set to the requested values.
if (resolved_format != new_format) {
HAL_LOGE("Device doesn't support desired stream configuration.");
return -EINVAL;
}
// Keep track of our new format.
format_.reset(new StreamFormat(new_format));
// Format changed, request new buffers.
int res = RequestBuffers(1);
if (res) {
HAL_LOGE("Requesting buffers for new format failed.");
return res;
}
*result_max_buffers = buffers_.size();
return 0;
}
int V4L2Wrapper::RequestBuffers(uint32_t num_requested) {
v4l2_requestbuffers req_buffers;
memset(&req_buffers, 0, sizeof(req_buffers));
req_buffers.type = format_->type();
req_buffers.memory = V4L2_MEMORY_USERPTR;
req_buffers.count = num_requested;
int res = IoctlLocked(VIDIOC_REQBUFS, &req_buffers);
// Calling REQBUFS releases all queued buffers back to the user.
if (res < 0) {
HAL_LOGE("REQBUFS failed: %s", strerror(errno));
return -ENODEV;
}
// V4L2 will set req_buffers.count to a number of buffers it can handle.
if (num_requested > 0 && req_buffers.count < 1) {
HAL_LOGE("REQBUFS claims it can't handle any buffers.");
return -ENODEV;
}
buffers_.resize(req_buffers.count);
return 0;
}
int V4L2Wrapper::EnqueueRequest(
std::shared_ptr<default_camera_hal::CaptureRequest> request) {
if (!format_) {
HAL_LOGE("Stream format must be set before enqueuing buffers.");
return -ENODEV;
}
// Find a free buffer index. Could use some sort of persistent hinting
// here to improve expected efficiency, but buffers_.size() is expected
// to be low enough (<10 experimentally) that it's not worth it.
int index = -1;
{
std::lock_guard<std::mutex> guard(buffer_queue_lock_);
for (size_t i = 0; i < buffers_.size(); ++i) {
if (!buffers_[i].active) {
index = i;
break;
}
}
}
if (index < 0) {
// Note: The HAL should be tracking the number of buffers in flight
// for each stream, and should never overflow the device.
HAL_LOGE("Cannot enqueue buffer: stream is already full.");
return -ENODEV;
}
// Set up a v4l2 buffer struct.
v4l2_buffer device_buffer;
memset(&device_buffer, 0, sizeof(device_buffer));
device_buffer.type = format_->type();
device_buffer.index = index;
// Use QUERYBUF to ensure our buffer/device is in good shape,
// and fill out remaining fields.
if (IoctlLocked(VIDIOC_QUERYBUF, &device_buffer) < 0) {
HAL_LOGE("QUERYBUF fails: %s", strerror(errno));
// Return buffer index.
std::lock_guard<std::mutex> guard(buffer_queue_lock_);
buffers_[index].active = false;
return -ENODEV;
}
// Setup our request context and fill in the user pointer field.
RequestContext* request_context;
void* data;
{
std::lock_guard<std::mutex> guard(buffer_queue_lock_);
request_context = &buffers_[index];
request_context->camera_buffer->SetDataSize(device_buffer.length);
request_context->camera_buffer->Reset();
request_context->camera_buffer->SetFourcc(format_->v4l2_pixel_format());
request_context->camera_buffer->SetWidth(format_->width());
request_context->camera_buffer->SetHeight(format_->height());
request_context->request = request;
data = request_context->camera_buffer->GetData();
}
device_buffer.m.userptr = reinterpret_cast<unsigned long>(data);
// Pass the buffer to the camera.
if (IoctlLocked(VIDIOC_QBUF, &device_buffer) < 0) {
HAL_LOGE("QBUF fails: %s", strerror(errno));
return -ENODEV;
}
// Mark the buffer as in flight.
std::lock_guard<std::mutex> guard(buffer_queue_lock_);
request_context->active = true;
return 0;
}
int V4L2Wrapper::DequeueRequest(std::shared_ptr<CaptureRequest>* request) {
if (!format_) {
HAL_LOGV(
"Format not set, so stream can't be on, "
"so no buffers available for dequeueing");
return -EAGAIN;
}
v4l2_buffer buffer;
memset(&buffer, 0, sizeof(buffer));
buffer.type = format_->type();
buffer.memory = V4L2_MEMORY_USERPTR;
int res = IoctlLocked(VIDIOC_DQBUF, &buffer);
if (res) {
if (errno == EAGAIN) {
// Expected failure.
return -EAGAIN;
} else {
// Unexpected failure.
HAL_LOGE("DQBUF fails: %s", strerror(errno));
return -ENODEV;
}
}
std::lock_guard<std::mutex> guard(buffer_queue_lock_);
RequestContext* request_context = &buffers_[buffer.index];
// Lock the camera stream buffer for painting.
const camera3_stream_buffer_t* stream_buffer =
&request_context->request->output_buffers[0];
uint32_t fourcc =
StreamFormat::HalToV4L2PixelFormat(stream_buffer->stream->format);
if (request) {
*request = request_context->request;
}
// Note that the device buffer length is passed to the output frame. If the
// GrallocFrameBuffer does not have support for the transformation to
// |fourcc|, it will assume that the amount of data to lock is based on
// |buffer.length|, otherwise it will use the ImageProcessor::ConvertedSize.
arc::GrallocFrameBuffer output_frame(
*stream_buffer->buffer, stream_buffer->stream->width,
stream_buffer->stream->height, fourcc, buffer.length,
stream_buffer->stream->usage);
res = output_frame.Map();
if (res) {
HAL_LOGE("Failed to map output frame.");
request_context->request.reset();
return -EINVAL;
}
if (request_context->camera_buffer->GetFourcc() == fourcc &&
request_context->camera_buffer->GetWidth() ==
stream_buffer->stream->width &&
request_context->camera_buffer->GetHeight() ==
stream_buffer->stream->height) {
// If no format conversion needs to be applied, directly copy the data over.
memcpy(output_frame.GetData(), request_context->camera_buffer->GetData(),
request_context->camera_buffer->GetDataSize());
} else {
// Perform the format conversion.
arc::CachedFrame cached_frame;
cached_frame.SetSource(request_context->camera_buffer.get(), 0);
cached_frame.Convert(request_context->request->settings, &output_frame);
}
request_context->request.reset();
// Mark the buffer as not in flight.
request_context->active = false;
return 0;
}
int V4L2Wrapper::GetInFlightBufferCount() {
int count = 0;
std::lock_guard<std::mutex> guard(buffer_queue_lock_);
for (auto& buffer : buffers_) {
if (buffer.active) {
count++;
}
}
return count;
}
} // namespace v4l2_camera_hal