blob: a014f1cab3c86e51ea6d2222833d7d03cb9f9112 [file] [log] [blame]
/*
* Copyright (c) 2009-2011 Intel Corporation. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <string.h>
#include <stdlib.h>
#include "VideoEncoderLog.h"
#include "VideoEncoderH263.h"
#include <va/va_tpi.h>
VideoEncoderH263::VideoEncoderH263() {
mComParams.profile = (VAProfile)PROFILE_H263BASELINE;
mAutoReferenceSurfaceNum = 2;
}
Encode_Status VideoEncoderH263::sendEncodeCommand(EncodeTask *task) {
Encode_Status ret = ENCODE_SUCCESS;
LOG_V( "Begin\n");
if (mFrameNum == 0) {
ret = renderSequenceParams(task);
CHECK_ENCODE_STATUS_RETURN("renderSequenceParams");
}
ret = renderPictureParams(task);
CHECK_ENCODE_STATUS_RETURN("renderPictureParams");
ret = renderSliceParams(task);
CHECK_ENCODE_STATUS_RETURN("renderSliceParams");
LOG_V( "End\n");
return ENCODE_SUCCESS;
}
Encode_Status VideoEncoderH263::renderSequenceParams(EncodeTask *) {
VAStatus vaStatus = VA_STATUS_SUCCESS;
VAEncSequenceParameterBufferH263 h263SequenceParam = VAEncSequenceParameterBufferH263();
uint32_t frameRateNum = mComParams.frameRate.frameRateNum;
uint32_t frameRateDenom = mComParams.frameRate.frameRateDenom;
LOG_V( "Begin\n\n");
//set up the sequence params for HW
h263SequenceParam.bits_per_second= mComParams.rcParams.bitRate;
h263SequenceParam.frame_rate =
(unsigned int) (frameRateNum + frameRateDenom /2) / frameRateDenom; //hard-coded, driver need;
h263SequenceParam.initial_qp = mComParams.rcParams.initQP;
h263SequenceParam.min_qp = mComParams.rcParams.minQP;
h263SequenceParam.intra_period = mComParams.intraPeriod;
//h263_seq_param.fixed_vop_rate = 30;
LOG_V("===h263 sequence params===\n");
LOG_I( "bitrate = %d\n", h263SequenceParam.bits_per_second);
LOG_I( "frame_rate = %d\n", h263SequenceParam.frame_rate);
LOG_I( "initial_qp = %d\n", h263SequenceParam.initial_qp);
LOG_I( "min_qp = %d\n", h263SequenceParam.min_qp);
LOG_I( "intra_period = %d\n\n", h263SequenceParam.intra_period);
vaStatus = vaCreateBuffer(
mVADisplay, mVAContext,
VAEncSequenceParameterBufferType,
sizeof(h263SequenceParam),
1, &h263SequenceParam,
&mSeqParamBuf);
CHECK_VA_STATUS_RETURN("vaCreateBuffer");
vaStatus = vaRenderPicture(mVADisplay, mVAContext, &mSeqParamBuf, 1);
CHECK_VA_STATUS_RETURN("vaRenderPicture");
LOG_V( "end\n");
return ENCODE_SUCCESS;
}
Encode_Status VideoEncoderH263::renderPictureParams(EncodeTask *task) {
VAStatus vaStatus = VA_STATUS_SUCCESS;
VAEncPictureParameterBufferH263 h263PictureParams = VAEncPictureParameterBufferH263();
LOG_V( "Begin\n\n");
// set picture params for HW
if(mAutoReference == false){
h263PictureParams.reference_picture = task->ref_surface;
h263PictureParams.reconstructed_picture = task->rec_surface;
}else {
h263PictureParams.reference_picture = mAutoRefSurfaces[0];
h263PictureParams.reconstructed_picture = mAutoRefSurfaces[1];
}
h263PictureParams.coded_buf = task->coded_buffer;
h263PictureParams.picture_width = mComParams.resolution.width;
h263PictureParams.picture_height = mComParams.resolution.height;
h263PictureParams.picture_type = (task->type == FTYPE_I) ? VAEncPictureTypeIntra : VAEncPictureTypePredictive;
LOG_V("======h263 picture params======\n");
LOG_V( "reference_picture = 0x%08x\n", h263PictureParams.reference_picture);
LOG_V( "reconstructed_picture = 0x%08x\n", h263PictureParams.reconstructed_picture);
LOG_V( "coded_buf = 0x%08x\n", h263PictureParams.coded_buf);
// LOG_I( "coded_buf_index = %d\n", mCodedBufIndex);
LOG_V( "picture_width = %d\n", h263PictureParams.picture_width);
LOG_V( "picture_height = %d\n",h263PictureParams.picture_height);
LOG_V( "picture_type = %d\n\n",h263PictureParams.picture_type);
vaStatus = vaCreateBuffer(
mVADisplay, mVAContext,
VAEncPictureParameterBufferType,
sizeof(h263PictureParams),
1,&h263PictureParams,
&mPicParamBuf);
CHECK_VA_STATUS_RETURN("vaCreateBuffer");
vaStatus = vaRenderPicture(mVADisplay, mVAContext, &mPicParamBuf , 1);
CHECK_VA_STATUS_RETURN("vaRenderPicture");
LOG_V( "end\n");
return ENCODE_SUCCESS;
}
Encode_Status VideoEncoderH263::renderSliceParams(EncodeTask *task) {
VAStatus vaStatus = VA_STATUS_SUCCESS;
uint32_t sliceHeight;
uint32_t sliceHeightInMB;
LOG_V("Begin\n\n");
sliceHeight = mComParams.resolution.height;
sliceHeight += 15;
sliceHeight &= (~15);
sliceHeightInMB = sliceHeight / 16;
vaStatus = vaCreateBuffer(
mVADisplay, mVAContext,
VAEncSliceParameterBufferType,
sizeof(VAEncSliceParameterBuffer),
1, NULL, &mSliceParamBuf);
CHECK_VA_STATUS_RETURN("vaCreateBuffer");
VAEncSliceParameterBuffer *sliceParams;
vaStatus = vaMapBuffer(mVADisplay, mSliceParamBuf, (void **)&sliceParams);
CHECK_VA_STATUS_RETURN("vaMapBuffer");
// starting MB row number for this slice
sliceParams->start_row_number = 0;
// slice height measured in MB
sliceParams->slice_height = sliceHeightInMB;
sliceParams->slice_flags.bits.is_intra = (task->type == FTYPE_I)?1:0;
sliceParams->slice_flags.bits.disable_deblocking_filter_idc = 0;
LOG_V("======h263 slice params======\n");
LOG_V("start_row_number = %d\n", (int) sliceParams->start_row_number);
LOG_V("slice_height_in_mb = %d\n", (int) sliceParams->slice_height);
LOG_V("slice.is_intra = %d\n", (int) sliceParams->slice_flags.bits.is_intra);
vaStatus = vaUnmapBuffer(mVADisplay, mSliceParamBuf);
CHECK_VA_STATUS_RETURN("vaUnmapBuffer");
vaStatus = vaRenderPicture(mVADisplay, mVAContext, &mSliceParamBuf, 1);
CHECK_VA_STATUS_RETURN("vaRenderPicture");
LOG_V("end\n");
return ENCODE_SUCCESS;
}