/*
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include <dt-bindings/input/input.h>
#include "imx6ul.dtsi"

/ {
	model = "NXPU_IOPB Board";
	compatible = "fsl,imx6ul-nxpu-iopb", "fsl,imx6ul";

	chosen {
		stdout-path = &uart3;
		bootargs = "console=ttymxc2,115200 root=/dev/ram0";

	};

	memory {
		reg = <0x80000000 0x20000000>;
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		linux,cma {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x14000000>;
			linux,cma-default;
		};
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_3p3v: 3p3v {
			compatible = "regulator-fixed";
			regulator-name = "3P3V";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-always-on;
		};

		reg_2p5v: 2p5v {
			compatible = "regulator-fixed";
			regulator-name = "2P5V";
			regulator-min-microvolt = <2500000>;
			regulator-max-microvolt = <2500000>;
			regulator-always-on;
		};

		wlreg_on: fixedregulator@100 {
		compatible = "regulator-fixed";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-name = "wlreg_on";
		gpio = <&gpio2 14 0>;
		startup-delay-us = <100>;
		enable-active-high;
		};

		bcmdhd_wlan_0: bcmdhd_wlan@0 {
				   compatible = "android,bcmdhd_wlan";
				   gpios = <&gpio2 15 0>; /* WL_HOST_WAKE */
				   wlreg_on-supply = <&wlreg_on>;
		};
	};

	bt_rfkill {
		compatible = "fsl,mxc_bt_rfkill";
		bt-power-gpios = <&gpio1 31 0>;
		status ="okay";
	};

	clocks {
		sys_mclk: sys_mclk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <24576000>;
		};
	};

	sound {
		compatible = "fsl,imx-audio-sgtl5000";
		model = "imx6ul-sgtl5000";
		audio-cpu = <&sai1>;
		audio-codec = <&codec>;
		audio-routing =
			"LINE_IN", "Line In Jack",
			"MIC_IN", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"Headphone Jack", "HP_OUT";
	};
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1>;
	phy-mode = "mii";
	phy-handle = <&ethphy0>;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@1 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <1>;
		};
/*
		ethphy1: ethernet-phy@2 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <2>;
		};
*/
	};
};

&cpu0 {
	arm-supply = <&reg_arm>;
	soc-supply = <&reg_soc>;
/*	dc-supply = <&reg_gpio_dvfs>;*/
};

&clks {
	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
	assigned-clock-rates = <786432000>;
};

&flexcan1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	status = "okay";
};

&i2c4 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c4>;
	status = "okay";
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";

	codec: sgtl5000@0a {
		   reg = <0x0a>;
		   compatible = "fsl,sgtl5000";
		   clocks = <&clks IMX6UL_CLK_SAI1>;
		   assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
				     <&clks IMX6UL_CLK_SAI1>;
		   assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
		   assigned-clock-rates = <0>, <24576000>;
		   /* set SAI1_MCLK_DIR to enable codec MCLK on imx6ul */
		   gpr = <&gpr 4 0x80000 0x80000>;
		   VDDA-supply = <&reg_3p3v>;
		   VDDIO-supply = <&reg_3p3v>;
	   };
};

&i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	pmic: pfuze3000@08 {
		  compatible = "fsl,pfuze3000";
		  reg = <0x08>;

		  regulators {
			sw1a_reg: sw1a {
			  regulator-min-microvolt = <700000>;
			  regulator-max-microvolt = <1375000>;
			  regulator-boot-on;
			  regulator-always-on;
			  regulator-ramp-delay = <6250>;
			};

			sw1c_reg: sw1b {
			  regulator-min-microvolt = <700000>;
			  regulator-max-microvolt = <1375000>;
			  regulator-boot-on;
			  regulator-always-on;
			  regulator-ramp-delay = <6250>;
			};

			sw2_reg: sw2 {
			 regulator-min-microvolt = <2500000>;
			 regulator-max-microvolt = <3300000>;
			 regulator-boot-on;
			 regulator-always-on;
			};

			sw3_reg: sw3 {
			  regulator-min-microvolt = <900000>;
			  regulator-max-microvolt = <1350000>;
			  regulator-boot-on;
			  regulator-always-on;
			};

			swbst_reg: swbst {
			  regulator-min-microvolt = <900000>;
			  regulator-max-microvolt = <5000000>;
			  regulator-boot-on;
			  regulator-always-on;
			};
		};
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog_1>;

	imx6ul-nxpu-iopb {
		pinctrl_hog_1: hoggrp-1 {
				   fsl,pins = <
					MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR  0x80000000
					MX6UL_PAD_CSI_DATA01__SAI1_MCLK		0x17088
					   >;
			   };

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX6UL_PAD_GPIO1_IO02__I2C1_SCL	0x4001b8b0
				MX6UL_PAD_GPIO1_IO03__I2C1_SDA	0x4001b8b0
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
				MX6UL_PAD_CSI_VSYNC__I2C2_SDA		0x4001b8b0
			>;
		};

		pinctrl_i2c4: i2c4grp {
			fsl,pins = <
				MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA	0x4001b8b0
				MX6UL_PAD_ENET2_RX_EN__I2C4_SCL		0x4001b8b0
			>;
		};

		pinctrl_uart4: uart4grp {
			fsl,pins = <
				MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
				MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
			>;
		};

		pinctrl_uart3: uart3grp {
			fsl,pins = <
				MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
				MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
			>;
		};

		pinctrl_uart2: uart2grp {
			fsl,pins = <
				MX6UL_PAD_NAND_DATA04__UART2_DCE_TX     0x1b0b1
				MX6UL_PAD_NAND_DATA05__UART2_DCE_RX     0x1b0b1
				MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS    0x1b0b1
				MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS    0x1b0b1
				MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31     0x3029	/*BT REG ON*/
			>;
		};

		pinctrl_usdhc2: usdhc2grp {
					fsl,pins = <
						MX6UL_PAD_CSI_DATA00__USDHC2_DATA0  0x17059
						MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
						MX6UL_PAD_CSI_DATA02__USDHC2_DATA2  0x17059
						MX6UL_PAD_CSI_DATA03__USDHC2_DATA3  0x17059
						MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
						MX6UL_PAD_CSI_HSYNC__USDHC2_CMD     0x17059
						>;
		};

		pinctrl_wifi: wifigrp {
				  fsl,pins = <
					  MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x3029  /* WIFI_HST_WK */
					  MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14    0x3029  /* WL_REG_ON */
					  >;
		};


		pinctrl_usdhc1: usdhc1grp {
			fsl,pins = <
				MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x10069
				MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x17059
				MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B	0x17059
				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x17059
				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x17059
				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x17059
				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x17059
				MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
				MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5		0x17059
				MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6		0x17059
				MX6UL_PAD_NAND_CLE__USDHC1_DATA7		0x17059
			>;
		};

		pinctrl_sai3: sai3grp {
			fsl,pins = <
				MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA	0x17088
				MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA	0x17088
				MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK	0x17088
				MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC	0x17088
				MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK	0x17088
				MX6UL_PAD_LCD_CLK__SAI3_MCLK		0x17088
			>;
		};

		pinctrl_sai1: sai1grp {
			fsl,pins = <
				MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x17088
				MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x17088
				MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x17088
				MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x17088
			>;
		};

		pinctrl_spi1: spi1grp {
			fsl,pins = <
				MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x70a1
				MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x70a1
				MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x70a1
				MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a1
				MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x70a1
				MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x70a1
				MX6UL_PAD_LCD_DATA07__GPIO3_IO12	0x70a1
			>;
		};

		pinctrl_enet1: enet1grp {
			fsl,pins = <
				MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC		0x1b0b0
				MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO		0x1b0b0
				MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x1b0b0
				MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK		0x4001b031
				MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x1b0b0
				MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x1b0b0
				MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02		0x1b0b0
				MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03		0x1b0b0
				MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER		0x1b0b0
				MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x1b0b0
				MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK		0x4001b031
				MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00		0x1b0b0
				MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x1b0b0
				MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02		0x1b0b0
				MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03		0x1b0b0
				MX6UL_PAD_UART2_CTS_B__ENET1_CRS		0x1b0b0
				MX6UL_PAD_UART2_RTS_B__ENET1_COL		0x1b0b0
				MX6UL_PAD_LCD_HSYNC__GPIO3_IO02			0x1b0b0		/*RESET*/
			>;
		};

		pinctrl_pwm3: pwm3grp {
			fsl,pins = <
				MX6UL_PAD_NAND_ALE__PWM3_OUT	0x110b0
			>;
		};

		pinctrl_pwm4: pwm4grp {
			fsl,pins = <
				MX6UL_PAD_GPIO1_IO05__PWM4_OUT	0x110b0
			>;
		};

		pinctrl_pwm5: pwm5grp {
			fsl,pins = <
				MX6UL_PAD_NAND_DQS__PWM5_OUT	0x110b0
			>;
		};

		pinctrl_flexcan1: flexcan1grp{
			fsl,pins = <
				MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX  0x1b020
				MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX  0x1b020
			>;
		};

	};
};

&sai1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai1>;

	status = "okay";
};

&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	fsl,uart-has-rtscts;
	/* for DTE mode, add below change */
	/*	fsl,dte-mode;*/
	/* pinctrl-0 = <&pinctrl_uart2dte>; */
	status = "okay";
};

/* wifi */

&usdhc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_wifi>;
	no-1-8-v;
	non-removable;
	cd-post;
	enable-sdio-wakeup;
	status = "okay";
	pm-ignore-notify;
	wifi-host; /* add hook for SD card detect mechanism for BCMDHD driver */
};

&usdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usdhc1>;
	no-1-8-v;
	non-removable;
	keep-power-in-suspend;
	enable-sdio-wakeup;
	status = "okay";
};

&usbotg1 {
	dr_mode = "otg";
	srp-disable;
	hnp-disable;
	adp-disable;
	status = "okay";
};

&usbotg2 {
	dr_mode = "host";
	disable-over-current;
	power-polarity-active-high;
	status = "okay";
};

&usbphy1 {
	tx-d-cal = <0x5>;
};

&usbphy2 {
	tx-d-cal = <0x5>;
};

&ecspi1 {
	fsl,spi-num-chipselects = <4>;
	cs-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>,
		   <&gpio3 10 GPIO_ACTIVE_HIGH>,
		   <&gpio3 11 GPIO_ACTIVE_HIGH>,
		   <&gpio3 12 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spi1>;
	status = "okay";

	spidev@0 {
		compatible = "rohm,dh2228fv";
		spi-max-frequency = <60000000>;
		reg = <0>;
	};

	spidev@1 {
		compatible = "rohm,dh2228fv";
		spi-max-frequency = <60000000>;
		reg = <1>;
	};

	spidev@2 {
		compatible = "rohm,dh2228fv";
		spi-max-frequency = <60000000>;
		reg = <2>;
	};

	spidev@3 {
		compatible = "rohm,dh2228fv";
		spi-max-frequency = <60000000>;
		reg = <3>;
	};
};

&pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm3>;
	clocks = <&clks IMX6UL_CLK_PWM3>,
		 <&clks IMX6UL_CLK_PWM3>;
	status = "okay";
};

&pwm4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm4>;
	clocks = <&clks IMX6UL_CLK_PWM4>,
		 <&clks IMX6UL_CLK_PWM4>;
	status = "okay";
};

&pwm5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm5>;
	clocks = <&clks IMX6UL_CLK_PWM5>,
		 <&clks IMX6UL_CLK_PWM5>;
	status = "okay";
};