/*
 * Copyright (C) 2023 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#define LOG_TAG "TfLiteMotionPredictor"
#include <input/TfLiteMotionPredictor.h>

#include <fcntl.h>
#include <sys/mman.h>
#include <unistd.h>

#include <algorithm>
#include <cmath>
#include <cstddef>
#include <cstdint>
#include <memory>
#include <span>
#include <type_traits>
#include <utility>

#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/mapped_file.h>
#define ATRACE_TAG ATRACE_TAG_INPUT
#include <cutils/trace.h>
#include <log/log.h>
#include <utils/Timers.h>

#include "tensorflow/lite/core/api/error_reporter.h"
#include "tensorflow/lite/core/api/op_resolver.h"
#include "tensorflow/lite/interpreter.h"
#include "tensorflow/lite/kernels/builtin_op_kernels.h"
#include "tensorflow/lite/model.h"
#include "tensorflow/lite/mutable_op_resolver.h"

#include "tinyxml2.h"

namespace android {
namespace {

constexpr char SIGNATURE_KEY[] = "serving_default";

// Input tensor names.
constexpr char INPUT_R[] = "r";
constexpr char INPUT_PHI[] = "phi";
constexpr char INPUT_PRESSURE[] = "pressure";
constexpr char INPUT_TILT[] = "tilt";
constexpr char INPUT_ORIENTATION[] = "orientation";

// Output tensor names.
constexpr char OUTPUT_R[] = "r";
constexpr char OUTPUT_PHI[] = "phi";
constexpr char OUTPUT_PRESSURE[] = "pressure";

// Ideally, we would just use std::filesystem::exists here, but it requires libc++fs, which causes
// build issues in other parts of the system.
#if defined(__ANDROID__)
bool fileExists(const char* filename) {
    struct stat buffer;
    return stat(filename, &buffer) == 0;
}
#endif

std::string getModelPath() {
#if defined(__ANDROID__)
    static const char* oemModel = "/vendor/etc/motion_predictor_model.tflite";
    if (fileExists(oemModel)) {
        return oemModel;
    }
    return "/system/etc/motion_predictor_model.tflite";
#else
    return base::GetExecutableDirectory() + "/motion_predictor_model.tflite";
#endif
}

std::string getConfigPath() {
    // The config file should be alongside the model file.
    return base::Dirname(getModelPath()) + "/motion_predictor_config.xml";
}

int64_t parseXMLInt64(const tinyxml2::XMLElement& configRoot, const char* elementName) {
    const tinyxml2::XMLElement* element = configRoot.FirstChildElement(elementName);
    LOG_ALWAYS_FATAL_IF(!element, "Could not find '%s' element", elementName);

    int64_t value = 0;
    LOG_ALWAYS_FATAL_IF(element->QueryInt64Text(&value) != tinyxml2::XML_SUCCESS,
                        "Failed to parse %s: %s", elementName, element->GetText());
    return value;
}

float parseXMLFloat(const tinyxml2::XMLElement& configRoot, const char* elementName) {
    const tinyxml2::XMLElement* element = configRoot.FirstChildElement(elementName);
    LOG_ALWAYS_FATAL_IF(!element, "Could not find '%s' element", elementName);

    float value = 0;
    LOG_ALWAYS_FATAL_IF(element->QueryFloatText(&value) != tinyxml2::XML_SUCCESS,
                        "Failed to parse %s: %s", elementName, element->GetText());
    return value;
}

// A TFLite ErrorReporter that logs to logcat.
class LoggingErrorReporter : public tflite::ErrorReporter {
public:
    int Report(const char* format, va_list args) override {
        return LOG_PRI_VA(ANDROID_LOG_ERROR, LOG_TAG, format, args);
    }
};

// Searches a runner for an input tensor.
TfLiteTensor* findInputTensor(const char* name, tflite::SignatureRunner* runner) {
    TfLiteTensor* tensor = runner->input_tensor(name);
    LOG_ALWAYS_FATAL_IF(!tensor, "Failed to find input tensor '%s'", name);
    return tensor;
}

// Searches a runner for an output tensor.
const TfLiteTensor* findOutputTensor(const char* name, tflite::SignatureRunner* runner) {
    const TfLiteTensor* tensor = runner->output_tensor(name);
    LOG_ALWAYS_FATAL_IF(!tensor, "Failed to find output tensor '%s'", name);
    return tensor;
}

// Returns the buffer for a tensor of type T.
template <typename T>
std::span<T> getTensorBuffer(typename std::conditional<std::is_const<T>::value, const TfLiteTensor*,
                                                       TfLiteTensor*>::type tensor) {
    LOG_ALWAYS_FATAL_IF(!tensor);

    const TfLiteType type = tflite::typeToTfLiteType<typename std::remove_cv<T>::type>();
    LOG_ALWAYS_FATAL_IF(tensor->type != type, "Unexpected type for '%s' tensor: %s (expected %s)",
                        tensor->name, TfLiteTypeGetName(tensor->type), TfLiteTypeGetName(type));

    LOG_ALWAYS_FATAL_IF(!tensor->data.data);
    return std::span<T>(reinterpret_cast<T*>(tensor->data.data), tensor->bytes / sizeof(T));
}

// Verifies that a tensor exists and has an underlying buffer of type T.
template <typename T>
void checkTensor(const TfLiteTensor* tensor) {
    LOG_ALWAYS_FATAL_IF(!tensor);

    const auto buffer = getTensorBuffer<const T>(tensor);
    LOG_ALWAYS_FATAL_IF(buffer.empty(), "No buffer for tensor '%s'", tensor->name);
}

std::unique_ptr<tflite::OpResolver> createOpResolver() {
    auto resolver = std::make_unique<tflite::MutableOpResolver>();
    resolver->AddBuiltin(::tflite::BuiltinOperator_CONCATENATION,
                         ::tflite::ops::builtin::Register_CONCATENATION());
    resolver->AddBuiltin(::tflite::BuiltinOperator_FULLY_CONNECTED,
                         ::tflite::ops::builtin::Register_FULLY_CONNECTED());
    resolver->AddBuiltin(::tflite::BuiltinOperator_GELU, ::tflite::ops::builtin::Register_GELU());
    return resolver;
}

} // namespace

TfLiteMotionPredictorBuffers::TfLiteMotionPredictorBuffers(size_t inputLength)
      : mInputR(inputLength, 0),
        mInputPhi(inputLength, 0),
        mInputPressure(inputLength, 0),
        mInputTilt(inputLength, 0),
        mInputOrientation(inputLength, 0) {
    LOG_ALWAYS_FATAL_IF(inputLength == 0, "Buffer input size must be greater than 0");
}

void TfLiteMotionPredictorBuffers::reset() {
    std::fill(mInputR.begin(), mInputR.end(), 0);
    std::fill(mInputPhi.begin(), mInputPhi.end(), 0);
    std::fill(mInputPressure.begin(), mInputPressure.end(), 0);
    std::fill(mInputTilt.begin(), mInputTilt.end(), 0);
    std::fill(mInputOrientation.begin(), mInputOrientation.end(), 0);
    mAxisFrom.reset();
    mAxisTo.reset();
}

void TfLiteMotionPredictorBuffers::copyTo(TfLiteMotionPredictorModel& model) const {
    LOG_ALWAYS_FATAL_IF(mInputR.size() != model.inputLength(),
                        "Buffer length %zu doesn't match model input length %zu", mInputR.size(),
                        model.inputLength());
    LOG_ALWAYS_FATAL_IF(!isReady(), "Buffers are incomplete");

    std::copy(mInputR.begin(), mInputR.end(), model.inputR().begin());
    std::copy(mInputPhi.begin(), mInputPhi.end(), model.inputPhi().begin());
    std::copy(mInputPressure.begin(), mInputPressure.end(), model.inputPressure().begin());
    std::copy(mInputTilt.begin(), mInputTilt.end(), model.inputTilt().begin());
    std::copy(mInputOrientation.begin(), mInputOrientation.end(), model.inputOrientation().begin());
}

void TfLiteMotionPredictorBuffers::pushSample(int64_t timestamp,
                                              const TfLiteMotionPredictorSample sample) {
    // Convert the sample (x, y) into polar (r, φ) based on a reference axis
    // from the preceding two points (mAxisFrom/mAxisTo).

    mTimestamp = timestamp;

    if (!mAxisTo) { // First point.
        mAxisTo = sample;
        return;
    }

    // Vector from the last point to the current sample point.
    const TfLiteMotionPredictorSample::Point v = sample.position - mAxisTo->position;

    const float r = std::hypot(v.x, v.y);
    float phi = 0;
    float orientation = 0;

    if (!mAxisFrom && r > 0) { // Second point.
        // We can only determine the distance from the first point, and not any
        // angle. However, if the second point forms an axis, the orientation can
        // be transformed relative to that axis.
        const float axisPhi = std::atan2(v.y, v.x);
        // A MotionEvent's orientation is measured clockwise from the vertical
        // axis, but axisPhi is measured counter-clockwise from the horizontal
        // axis.
        orientation = M_PI_2 - sample.orientation - axisPhi;
    } else {
        const TfLiteMotionPredictorSample::Point axis = mAxisTo->position - mAxisFrom->position;
        const float axisPhi = std::atan2(axis.y, axis.x);
        phi = std::atan2(v.y, v.x) - axisPhi;

        if (std::hypot(axis.x, axis.y) > 0) {
            // See note above.
            orientation = M_PI_2 - sample.orientation - axisPhi;
        }
    }

    // Update the axis for the next point.
    if (r > 0) {
        mAxisFrom = mAxisTo;
        mAxisTo = sample;
    }

    // Push the current sample onto the end of the input buffers.
    mInputR.pushBack(r);
    mInputPhi.pushBack(phi);
    mInputPressure.pushBack(sample.pressure);
    mInputTilt.pushBack(sample.tilt);
    mInputOrientation.pushBack(orientation);
}

std::unique_ptr<TfLiteMotionPredictorModel> TfLiteMotionPredictorModel::create() {
    const std::string modelPath = getModelPath();
    android::base::unique_fd fd(open(modelPath.c_str(), O_RDONLY));
    if (fd == -1) {
        PLOG(FATAL) << "Could not read model from " << modelPath;
    }

    const off_t fdSize = lseek(fd, 0, SEEK_END);
    if (fdSize == -1) {
        PLOG(FATAL) << "Failed to determine file size";
    }

    std::unique_ptr<android::base::MappedFile> modelBuffer =
            android::base::MappedFile::FromFd(fd, /*offset=*/0, fdSize, PROT_READ);
    if (!modelBuffer) {
        PLOG(FATAL) << "Failed to mmap model";
    }

    const std::string configPath = getConfigPath();
    tinyxml2::XMLDocument configDocument;
    LOG_ALWAYS_FATAL_IF(configDocument.LoadFile(configPath.c_str()) != tinyxml2::XML_SUCCESS,
                        "Failed to load config file from %s", configPath.c_str());

    // Parse configuration file.
    const tinyxml2::XMLElement* configRoot = configDocument.FirstChildElement("motion-predictor");
    LOG_ALWAYS_FATAL_IF(!configRoot);
    Config config{
            .predictionInterval = parseXMLInt64(*configRoot, "prediction-interval"),
            .distanceNoiseFloor = parseXMLFloat(*configRoot, "distance-noise-floor"),
    };

    return std::unique_ptr<TfLiteMotionPredictorModel>(
            new TfLiteMotionPredictorModel(std::move(modelBuffer), std::move(config)));
}

TfLiteMotionPredictorModel::TfLiteMotionPredictorModel(
        std::unique_ptr<android::base::MappedFile> model, Config config)
      : mFlatBuffer(std::move(model)), mConfig(std::move(config)) {
    CHECK(mFlatBuffer);
    mErrorReporter = std::make_unique<LoggingErrorReporter>();
    mModel = tflite::FlatBufferModel::VerifyAndBuildFromBuffer(mFlatBuffer->data(),
                                                               mFlatBuffer->size(),
                                                               /*extra_verifier=*/nullptr,
                                                               mErrorReporter.get());
    LOG_ALWAYS_FATAL_IF(!mModel);

    auto resolver = createOpResolver();
    tflite::InterpreterBuilder builder(*mModel, *resolver);

    if (builder(&mInterpreter) != kTfLiteOk || !mInterpreter) {
        LOG_ALWAYS_FATAL("Failed to build interpreter");
    }

    mRunner = mInterpreter->GetSignatureRunner(SIGNATURE_KEY);
    LOG_ALWAYS_FATAL_IF(!mRunner, "Failed to find runner for signature '%s'", SIGNATURE_KEY);

    allocateTensors();
}

TfLiteMotionPredictorModel::~TfLiteMotionPredictorModel() {}

void TfLiteMotionPredictorModel::allocateTensors() {
    if (mRunner->AllocateTensors() != kTfLiteOk) {
        LOG_ALWAYS_FATAL("Failed to allocate tensors");
    }

    attachInputTensors();
    attachOutputTensors();

    checkTensor<float>(mInputR);
    checkTensor<float>(mInputPhi);
    checkTensor<float>(mInputPressure);
    checkTensor<float>(mInputTilt);
    checkTensor<float>(mInputOrientation);
    checkTensor<float>(mOutputR);
    checkTensor<float>(mOutputPhi);
    checkTensor<float>(mOutputPressure);

    const auto checkInputTensorSize = [this](const TfLiteTensor* tensor) {
        const size_t size = getTensorBuffer<const float>(tensor).size();
        LOG_ALWAYS_FATAL_IF(size != inputLength(),
                            "Tensor '%s' length %zu does not match input length %zu", tensor->name,
                            size, inputLength());
    };

    checkInputTensorSize(mInputR);
    checkInputTensorSize(mInputPhi);
    checkInputTensorSize(mInputPressure);
    checkInputTensorSize(mInputTilt);
    checkInputTensorSize(mInputOrientation);
}

void TfLiteMotionPredictorModel::attachInputTensors() {
    mInputR = findInputTensor(INPUT_R, mRunner);
    mInputPhi = findInputTensor(INPUT_PHI, mRunner);
    mInputPressure = findInputTensor(INPUT_PRESSURE, mRunner);
    mInputTilt = findInputTensor(INPUT_TILT, mRunner);
    mInputOrientation = findInputTensor(INPUT_ORIENTATION, mRunner);
}

void TfLiteMotionPredictorModel::attachOutputTensors() {
    mOutputR = findOutputTensor(OUTPUT_R, mRunner);
    mOutputPhi = findOutputTensor(OUTPUT_PHI, mRunner);
    mOutputPressure = findOutputTensor(OUTPUT_PRESSURE, mRunner);
}

bool TfLiteMotionPredictorModel::invoke() {
    ATRACE_BEGIN("TfLiteMotionPredictorModel::invoke");
    TfLiteStatus result = mRunner->Invoke();
    ATRACE_END();

    if (result != kTfLiteOk) {
        return false;
    }

    // Invoke() might reallocate tensors, so they need to be reattached.
    attachInputTensors();
    attachOutputTensors();

    if (outputR().size() != outputPhi().size() || outputR().size() != outputPressure().size()) {
        LOG_ALWAYS_FATAL("Output size mismatch: (r: %zu, phi: %zu, pressure: %zu)",
                         outputR().size(), outputPhi().size(), outputPressure().size());
    }

    return true;
}

size_t TfLiteMotionPredictorModel::inputLength() const {
    return getTensorBuffer<const float>(mInputR).size();
}

size_t TfLiteMotionPredictorModel::outputLength() const {
    return getTensorBuffer<const float>(mOutputR).size();
}

std::span<float> TfLiteMotionPredictorModel::inputR() {
    return getTensorBuffer<float>(mInputR);
}

std::span<float> TfLiteMotionPredictorModel::inputPhi() {
    return getTensorBuffer<float>(mInputPhi);
}

std::span<float> TfLiteMotionPredictorModel::inputPressure() {
    return getTensorBuffer<float>(mInputPressure);
}

std::span<float> TfLiteMotionPredictorModel::inputTilt() {
    return getTensorBuffer<float>(mInputTilt);
}

std::span<float> TfLiteMotionPredictorModel::inputOrientation() {
    return getTensorBuffer<float>(mInputOrientation);
}

std::span<const float> TfLiteMotionPredictorModel::outputR() const {
    return getTensorBuffer<const float>(mOutputR);
}

std::span<const float> TfLiteMotionPredictorModel::outputPhi() const {
    return getTensorBuffer<const float>(mOutputPhi);
}

std::span<const float> TfLiteMotionPredictorModel::outputPressure() const {
    return getTensorBuffer<const float>(mOutputPressure);
}

} // namespace android