blob: feaee8ed5009fef0fd2a691e8ab138eafd5d90a7 [file] [log] [blame]
/*
* Copyright (C) 2010 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ANDROID_HWUI_PROPERTIES_H
#define ANDROID_HWUI_PROPERTIES_H
#include <cutils/properties.h>
#include <stdlib.h>
/**
* This file contains the list of system properties used to configure
* the OpenGLRenderer.
*/
///////////////////////////////////////////////////////////////////////////////
// Compile-time properties
///////////////////////////////////////////////////////////////////////////////
// If turned on, text is interpreted as glyphs instead of UTF-16
#define RENDER_TEXT_AS_GLYPHS 1
// Indicates whether to remove the biggest layers first, or the smaller ones
#define LAYER_REMOVE_BIGGEST_FIRST 0
// Textures used by layers must have dimensions multiples of this number
#define LAYER_SIZE 64
// Defines the size in bits of the stencil buffer for the framebuffer
// Note: Only 1 bit is required for clipping but more bits are required
// to properly implement overdraw debugging
#define STENCIL_BUFFER_SIZE 8
///////////////////////////////////////////////////////////////////////////////
// Debug properties
///////////////////////////////////////////////////////////////////////////////
/**
* Debug level for app developers. The value is a numeric value defined
* by the DebugLevel enum below.
*/
#define PROPERTY_DEBUG "debug.hwui.level"
/**
* Debug levels. Debug levels are used as flags.
*/
enum DebugLevel {
kDebugDisabled = 0,
kDebugMemory = 1,
kDebugCaches = 2,
kDebugMoreCaches = kDebugMemory | kDebugCaches
};
/**
* Used to enable/disable layers update debugging. The accepted values are
* "true" and "false". The default value is "false".
*/
#define PROPERTY_DEBUG_LAYERS_UPDATES "debug.hwui.show_layers_updates"
/**
* Used to enable/disable overdraw debugging.
*
* The accepted values are
* "show", to show overdraw
* "show_deuteranomaly", to show overdraw if you suffer from Deuteranomaly
* "count", to show an overdraw counter
* "false", to disable overdraw debugging
*
* The default value is "false".
*/
#define PROPERTY_DEBUG_OVERDRAW "debug.hwui.overdraw"
/**
* Used to enable/disable PerfHUD ES profiling. The accepted values
* are "true" and "false". The default value is "false".
*/
#define PROPERTY_DEBUG_NV_PROFILING "debug.hwui.nv_profiling"
/**
* System property used to enable or disable hardware rendering profiling.
* The default value of this property is assumed to be false.
*
* When profiling is enabled, the adb shell dumpsys gfxinfo command will
* output extra information about the time taken to execute by the last
* frames.
*
* Possible values:
* "true", to enable profiling
* "visual_bars", to enable profiling and visualize the results on screen
* "false", to disable profiling
*/
#define PROPERTY_PROFILE "debug.hwui.profile"
#define PROPERTY_PROFILE_VISUALIZE_BARS "visual_bars"
/**
* System property used to specify the number of frames to be used
* when doing hardware rendering profiling.
* The default value of this property is #PROFILE_MAX_FRAMES.
*
* When profiling is enabled, the adb shell dumpsys gfxinfo command will
* output extra information about the time taken to execute by the last
* frames.
*
* Possible values:
* "60", to set the limit of frames to 60
*/
#define PROPERTY_PROFILE_MAXFRAMES "debug.hwui.profile.maxframes"
/**
* Used to enable/disable non-rectangular clipping debugging.
*
* The accepted values are:
* "highlight", drawing commands clipped by the stencil will
* be colored differently
* "region", renders the clipping region on screen whenever
* the stencil is set
* "hide", don't show the clip
*
* The default value is "hide".
*/
#define PROPERTY_DEBUG_STENCIL_CLIP "debug.hwui.show_non_rect_clip"
/**
* Disables draw operation deferral if set to "true", forcing draw
* commands to be issued to OpenGL in order, and processed in sequence
* with state-manipulation canvas commands.
*/
#define PROPERTY_DISABLE_DRAW_DEFER "debug.hwui.disable_draw_defer"
/**
* Used to disable draw operation reordering when deferring draw operations
* Has no effect if PROPERTY_DISABLE_DRAW_DEFER is set to "true"
*/
#define PROPERTY_DISABLE_DRAW_REORDER "debug.hwui.disable_draw_reorder"
///////////////////////////////////////////////////////////////////////////////
// Runtime configuration properties
///////////////////////////////////////////////////////////////////////////////
/**
* Used to enable/disable scissor optimization. The accepted values are
* "true" and "false". The default value is "false".
*
* When scissor optimization is enabled, OpenGLRenderer will attempt to
* minimize the use of scissor by selectively enabling and disabling the
* GL scissor test.
* When the optimization is disabled, OpenGLRenderer will keep the GL
* scissor test enabled and change the scissor rect as needed.
* Some GPUs (for instance the SGX 540) perform better when changing
* the scissor rect often than when enabling/disabling the scissor test
* often.
*/
#define PROPERTY_DISABLE_SCISSOR_OPTIMIZATION "ro.hwui.disable_scissor_opt"
/**
* Indicates whether PBOs can be used to back pixel buffers.
* Accepted values are "true" and "false". Default is true.
*/
#define PROPERTY_ENABLE_GPU_PIXEL_BUFFERS "ro.hwui.use_gpu_pixel_buffers"
// These properties are defined in mega-bytes
#define PROPERTY_TEXTURE_CACHE_SIZE "ro.hwui.texture_cache_size"
#define PROPERTY_LAYER_CACHE_SIZE "ro.hwui.layer_cache_size"
#define PROPERTY_RENDER_BUFFER_CACHE_SIZE "ro.hwui.r_buffer_cache_size"
#define PROPERTY_GRADIENT_CACHE_SIZE "ro.hwui.gradient_cache_size"
#define PROPERTY_PATH_CACHE_SIZE "ro.hwui.path_cache_size"
#define PROPERTY_VERTEX_CACHE_SIZE "ro.hwui.vertex_cache_size"
#define PROPERTY_PATCH_CACHE_SIZE "ro.hwui.patch_cache_size"
#define PROPERTY_DROP_SHADOW_CACHE_SIZE "ro.hwui.drop_shadow_cache_size"
#define PROPERTY_FBO_CACHE_SIZE "ro.hwui.fbo_cache_size"
// These properties are defined in percentage (range 0..1)
#define PROPERTY_TEXTURE_CACHE_FLUSH_RATE "ro.hwui.texture_cache_flushrate"
// These properties are defined in pixels
#define PROPERTY_TEXT_SMALL_CACHE_WIDTH "ro.hwui.text_small_cache_width"
#define PROPERTY_TEXT_SMALL_CACHE_HEIGHT "ro.hwui.text_small_cache_height"
#define PROPERTY_TEXT_LARGE_CACHE_WIDTH "ro.hwui.text_large_cache_width"
#define PROPERTY_TEXT_LARGE_CACHE_HEIGHT "ro.hwui.text_large_cache_height"
// Indicates whether gamma correction should be applied in the shaders
// or in lookup tables. Accepted values:
//
// - "lookup3", correction based on lookup tables. Gamma correction
// is different for black and white text (see thresholds below)
//
// - "lookup", correction based on a single lookup table
//
// - "shader3", correction applied by a GLSL shader. Gamma correction
// is different for black and white text (see thresholds below)
//
// - "shader", correction applied by a GLSL shader
//
// See PROPERTY_TEXT_GAMMA, PROPERTY_TEXT_BLACK_GAMMA_THRESHOLD and
// PROPERTY_TEXT_WHITE_GAMMA_THRESHOLD for more control.
#define PROPERTY_TEXT_GAMMA_METHOD "hwui.text_gamma_correction"
#define DEFAULT_TEXT_GAMMA_METHOD "lookup"
// Gamma (>= 1.0, <= 10.0)
#define PROPERTY_TEXT_GAMMA "hwui.text_gamma"
// Luminance threshold below which black gamma correction is applied. Range: [0..255]
#define PROPERTY_TEXT_BLACK_GAMMA_THRESHOLD "hwui.text_gamma.black_threshold"
// Lumincance threshold above which white gamma correction is applied. Range: [0..255]
#define PROPERTY_TEXT_WHITE_GAMMA_THRESHOLD "hwui.text_gamma.white_threshold"
///////////////////////////////////////////////////////////////////////////////
// Default property values
///////////////////////////////////////////////////////////////////////////////
#define DEFAULT_TEXTURE_CACHE_SIZE 24.0f
#define DEFAULT_LAYER_CACHE_SIZE 16.0f
#define DEFAULT_RENDER_BUFFER_CACHE_SIZE 2.0f
#define DEFAULT_PATH_CACHE_SIZE 10.0f
#define DEFAULT_VERTEX_CACHE_SIZE 1.0f
#define DEFAULT_PATCH_CACHE_SIZE 128 // in kB
#define DEFAULT_GRADIENT_CACHE_SIZE 0.5f
#define DEFAULT_DROP_SHADOW_CACHE_SIZE 2.0f
#define DEFAULT_FBO_CACHE_SIZE 16
#define DEFAULT_TEXTURE_CACHE_FLUSH_RATE 0.6f
#define DEFAULT_TEXT_GAMMA 1.4f
#define DEFAULT_TEXT_BLACK_GAMMA_THRESHOLD 64
#define DEFAULT_TEXT_WHITE_GAMMA_THRESHOLD 192
///////////////////////////////////////////////////////////////////////////////
// Misc
///////////////////////////////////////////////////////////////////////////////
// Converts a number of mega-bytes into bytes
#define MB(s) s * 1024 * 1024
// Converts a number of kilo-bytes into bytes
#define KB(s) s * 1024
static DebugLevel readDebugLevel() {
char property[PROPERTY_VALUE_MAX];
if (property_get(PROPERTY_DEBUG, property, NULL) > 0) {
return (DebugLevel) atoi(property);
}
return kDebugDisabled;
}
#endif // ANDROID_HWUI_PROPERTIES_H