blob: 25656ed5d6ab790eb85a24f8366aca7d619f5555 [file] [log] [blame]
/*
* Copyright (c) 2008-2009, Motorola, Inc.
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* - Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* - Neither the name of the Motorola, Inc. nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
package javax.obex;
import java.io.DataInputStream;
import java.io.DataOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
/**
* The <code>Operation</code> interface provides ways to manipulate a single
* OBEX PUT or GET operation. The implementation of this interface sends OBEX
* packets as they are built. If during the operation the peer in the operation
* ends the operation, an <code>IOException</code> is thrown on the next read
* from the input stream, write to the output stream, or call to
* <code>sendHeaders()</code>.
* <P>
* <STRONG>Definition of methods inherited from <code>ContentConnection</code>
* </STRONG>
* <P>
* <code>getEncoding()</code> will always return <code>null</code>. <BR>
* <code>getLength()</code> will return the length specified by the OBEX Length
* header or -1 if the OBEX Length header was not included. <BR>
* <code>getType()</code> will return the value specified in the OBEX Type
* header or <code>null</code> if the OBEX Type header was not included.<BR>
* <P>
* <STRONG>How Headers are Handled</STRONG>
* <P>
* As headers are received, they may be retrieved through the
* <code>getReceivedHeaders()</code> method. If new headers are set during the
* operation, the new headers will be sent during the next packet exchange.
* <P>
* <STRONG>PUT example</STRONG>
* <P>
* <PRE>
* void putObjectViaOBEX(ClientSession conn, HeaderSet head, byte[] obj) throws IOException {
* // Include the length header
* head.setHeader(head.LENGTH, new Long(obj.length));
* // Initiate the PUT request
* Operation op = conn.put(head);
* // Open the output stream to put the object to it
* DataOutputStream out = op.openDataOutputStream();
* // Send the object to the server
* out.write(obj);
* // End the transaction
* out.close();
* op.close();
* }
* </PRE>
* <P>
* <STRONG>GET example</STRONG>
* <P>
* <PRE>
* byte[] getObjectViaOBEX(ClientSession conn, HeaderSet head) throws IOException {
* // Send the initial GET request to the server
* Operation op = conn.get(head);
* // Retrieve the length of the object being sent back
* int length = op.getLength();
* // Create space for the object
* byte[] obj = new byte[length];
* // Get the object from the input stream
* DataInputStream in = trans.openDataInputStream();
* in.read(obj);
* // End the transaction
* in.close();
* op.close();
* return obj;
* }
* </PRE>
*
* <H3>Client PUT Operation Flow</H3> For PUT operations, a call to
* <code>close()</code> the <code>OutputStream</code> returned from
* <code>openOutputStream()</code> or <code>openDataOutputStream()</code> will
* signal that the request is done. (In OBEX terms, the End-Of-Body header
* should be sent and the final bit in the request will be set.) At this point,
* the reply from the server may begin to be processed. A call to
* <code>getResponseCode()</code> will do an implicit close on the
* <code>OutputStream</code> and therefore signal that the request is done.
* <H3>Client GET Operation Flow</H3> For GET operation, a call to
* <code>openInputStream()</code> or <code>openDataInputStream()</code> will
* signal that the request is done. (In OBEX terms, the final bit in the request
* will be set.) A call to <code>getResponseCode()</code> will cause an implicit
* close on the <code>InputStream</code>. No further data may be read at this
* point.
* @hide
*/
public interface Operation {
/**
* Sends an ABORT message to the server. By calling this method, the
* corresponding input and output streams will be closed along with this
* object. No headers are sent in the abort request. This will end the
* operation since <code>close()</code> will be called by this method.
* @throws IOException if the transaction has already ended or if an OBEX
* server calls this method
*/
void abort() throws IOException;
/**
* Returns the headers that have been received during the operation.
* Modifying the object returned has no effect on the headers that are sent
* or retrieved.
* @return the headers received during this <code>Operation</code>
* @throws IOException if this <code>Operation</code> has been closed
*/
HeaderSet getReceivedHeader() throws IOException;
/**
* Specifies the headers that should be sent in the next OBEX message that
* is sent.
* @param headers the headers to send in the next message
* @throws IOException if this <code>Operation</code> has been closed or the
* transaction has ended and no further messages will be exchanged
* @throws IllegalArgumentException if <code>headers</code> was not created
* by a call to <code>ServerRequestHandler.createHeaderSet()</code>
* or <code>ClientSession.createHeaderSet()</code>
* @throws NullPointerException if <code>headers</code> if <code>null</code>
*/
void sendHeaders(HeaderSet headers) throws IOException;
/**
* Returns the response code received from the server. Response codes are
* defined in the <code>ResponseCodes</code> class.
* @see ResponseCodes
* @return the response code retrieved from the server
* @throws IOException if an error occurred in the transport layer during
* the transaction; if this object was created by an OBEX server
*/
int getResponseCode() throws IOException;
String getEncoding();
long getLength();
int getHeaderLength();
String getType();
InputStream openInputStream() throws IOException;
DataInputStream openDataInputStream() throws IOException;
OutputStream openOutputStream() throws IOException;
DataOutputStream openDataOutputStream() throws IOException;
void close() throws IOException;
int getMaxPacketSize();
}