| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package com.android.internal.telephony; |
| |
| import android.content.Intent; |
| |
| /** |
| * The intents that the telephony services broadcast. |
| * |
| * <p class="warning"> |
| * THESE ARE NOT THE API! Use the {@link android.telephony.TelephonyManager} class. |
| * DON'T LISTEN TO THESE DIRECTLY. |
| */ |
| public class TelephonyIntents { |
| |
| /** |
| * Broadcast Action: The phone service state has changed. The intent will have the following |
| * extra values:</p> |
| * <ul> |
| * <li><em>state</em> - An int with one of the following values: |
| * {@link android.telephony.ServiceState#STATE_IN_SERVICE}, |
| * {@link android.telephony.ServiceState#STATE_OUT_OF_SERVICE}, |
| * {@link android.telephony.ServiceState#STATE_EMERGENCY_ONLY} |
| * or {@link android.telephony.ServiceState#STATE_POWER_OFF} |
| * <li><em>roaming</em> - A boolean value indicating whether the phone is roaming.</li> |
| * <li><em>operator-alpha-long</em> - The carrier name as a string.</li> |
| * <li><em>operator-alpha-short</em> - A potentially shortened version of the carrier name, |
| * as a string.</li> |
| * <li><em>operator-numeric</em> - A number representing the carrier, as a string. This is |
| * a five or six digit number consisting of the MCC (Mobile Country Code, 3 digits) |
| * and MNC (Mobile Network code, 2-3 digits).</li> |
| * <li><em>manual</em> - A boolean, where true indicates that the user has chosen to select |
| * the network manually, and false indicates that network selection is handled by the |
| * phone.</li> |
| * </ul> |
| * |
| * <p class="note"> |
| * Requires the READ_PHONE_STATE permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_SERVICE_STATE_CHANGED = "android.intent.action.SERVICE_STATE"; |
| |
| /** |
| * <p>Broadcast Action: The radio technology has changed. The intent will have the following |
| * extra values:</p> |
| * <ul> |
| * <li><em>phoneName</em> - A string version of the new phone name.</li> |
| * </ul> |
| * |
| * <p class="note"> |
| * You can <em>not</em> receive this through components declared |
| * in manifests, only by explicitly registering for it with |
| * {@link android.content.Context#registerReceiver(android.content.BroadcastReceiver, |
| * android.content.IntentFilter) Context.registerReceiver()}. |
| * |
| * <p class="note"> |
| * Requires no permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_RADIO_TECHNOLOGY_CHANGED |
| = "android.intent.action.RADIO_TECHNOLOGY"; |
| /** |
| * <p>Broadcast Action: The emergency callback mode is changed. |
| * <ul> |
| * <li><em>phoneinECMState</em> - A boolean value,true=phone in ECM, false=ECM off</li> |
| * </ul> |
| * <p class="note"> |
| * You can <em>not</em> receive this through components declared |
| * in manifests, only by explicitly registering for it with |
| * {@link android.content.Context#registerReceiver(android.content.BroadcastReceiver, |
| * android.content.IntentFilter) Context.registerReceiver()}. |
| * |
| * <p class="note"> |
| * Requires no permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_EMERGENCY_CALLBACK_MODE_CHANGED |
| = "android.intent.action.EMERGENCY_CALLBACK_MODE_CHANGED"; |
| /** |
| * Broadcast Action: The phone's signal strength has changed. The intent will have the |
| * following extra values:</p> |
| * <ul> |
| * <li><em>phoneName</em> - A string version of the phone name.</li> |
| * <li><em>asu</em> - A numeric value for the signal strength. |
| * An ASU is 0-31 or -1 if unknown (for GSM, dBm = -113 - 2 * asu). |
| * The following special values are defined: |
| * <ul><li>0 means "-113 dBm or less".</li><li>31 means "-51 dBm or greater".</li></ul> |
| * </li> |
| * </ul> |
| * |
| * <p class="note"> |
| * You can <em>not</em> receive this through components declared |
| * in manifests, only by exlicitly registering for it with |
| * {@link android.content.Context#registerReceiver(android.content.BroadcastReceiver, |
| * android.content.IntentFilter) Context.registerReceiver()}. |
| * |
| * <p class="note"> |
| * Requires the READ_PHONE_STATE permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_SIGNAL_STRENGTH_CHANGED = "android.intent.action.SIG_STR"; |
| |
| |
| /** |
| * Broadcast Action: The data connection state has changed for any one of the |
| * phone's mobile data connections (eg, default, MMS or GPS specific connection). |
| * The intent will have the following extra values:</p> |
| * <dl> |
| * <dt>phoneName</dt><dd>A string version of the phone name.</dd> |
| * <dt>state</dt><dd>One of {@code CONNECTED}, {@code CONNECTING}, |
| * or {@code DISCONNECTED}.</dd> |
| * <dt>apn</dt><dd>A string that is the APN associated with this connection.</dd> |
| * <dt>apnType</dt><dd>A string array of APN types associated with this connection. |
| * The APN type {@code *} is a special type that means this APN services all types.</dd> |
| * </dl> |
| * |
| * <p class="note"> |
| * Requires the READ_PHONE_STATE permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_ANY_DATA_CONNECTION_STATE_CHANGED |
| = "android.intent.action.ANY_DATA_STATE"; |
| |
| /** |
| * Broadcast Action: Occurs when a data connection connects to a provisioning apn |
| * and is broadcast by the low level data connection code. |
| * The intent will have the following extra values:</p> |
| * <dl> |
| * <dt>apn</dt><dd>A string that is the APN associated with this connection.</dd> |
| * <dt>apnType</dt><dd>A string array of APN types associated with this connection. |
| * The APN type {@code *} is a special type that means this APN services all types.</dd> |
| * <dt>linkProperties</dt><dd>{@code LinkProperties} for this APN.</dd> |
| * <dt>linkCapabilities</dt><dd>The {@code LinkCapabilities} for this APN.</dd> |
| * <dt>iface</dt><dd>A string that is the name of the interface.</dd> |
| * </dl> |
| * |
| * <p class="note"> |
| * Requires the READ_PHONE_STATE permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_DATA_CONNECTION_CONNECTED_TO_PROVISIONING_APN |
| = "android.intent.action.DATA_CONNECTION_CONNECTED_TO_PROVISIONING_APN"; |
| |
| /** |
| * Broadcast Action: An attempt to establish a data connection has failed. |
| * The intent will have the following extra values:</p> |
| * <dl> |
| * <dt>phoneName</dt><dd>A string version of the phone name.</dd> |
| * <dt>state</dt><dd>One of {@code CONNECTED}, {@code CONNECTING}, or {code DISCONNECTED}.</dd> |
| * <dt>reason</dt><dd>A string indicating the reason for the failure, if available.</dd> |
| * </dl> |
| * |
| * <p class="note"> |
| * Requires the READ_PHONE_STATE permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_DATA_CONNECTION_FAILED |
| = "android.intent.action.DATA_CONNECTION_FAILED"; |
| |
| |
| /** |
| * Broadcast Action: The sim card state has changed. |
| * The intent will have the following extra values:</p> |
| * <dl> |
| * <dt>phoneName</dt><dd>A string version of the phone name.</dd> |
| * <dt>ss</dt><dd>The sim state. One of: |
| * <dl> |
| * <dt>{@code ABSENT}</dt><dd>SIM card not found</dd> |
| * <dt>{@code LOCKED}</dt><dd>SIM card locked (see {@code reason})</dd> |
| * <dt>{@code READY}</dt><dd>SIM card ready</dd> |
| * <dt>{@code IMSI}</dt><dd>FIXME: what is this state?</dd> |
| * <dt>{@code LOADED}</dt><dd>SIM card data loaded</dd> |
| * </dl></dd> |
| * <dt>reason</dt><dd>The reason why ss is {@code LOCKED}; null otherwise.</dd> |
| * <dl> |
| * <dt>{@code PIN}</dt><dd>locked on PIN1</dd> |
| * <dt>{@code PUK}</dt><dd>locked on PUK1</dd> |
| * <dt>{@code NETWORK}</dt><dd>locked on network personalization</dd> |
| * </dl> |
| * </dl> |
| * |
| * <p class="note"> |
| * Requires the READ_PHONE_STATE permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_SIM_STATE_CHANGED |
| = "android.intent.action.SIM_STATE_CHANGED"; |
| |
| |
| /** |
| * Broadcast Action: The time was set by the carrier (typically by the NITZ string). |
| * This is a sticky broadcast. |
| * The intent will have the following extra values:</p> |
| * <ul> |
| * <li><em>time</em> - The time as a long in UTC milliseconds.</li> |
| * </ul> |
| * |
| * <p class="note"> |
| * Requires the READ_PHONE_STATE permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_NETWORK_SET_TIME = "android.intent.action.NETWORK_SET_TIME"; |
| |
| |
| /** |
| * Broadcast Action: The timezone was set by the carrier (typically by the NITZ string). |
| * This is a sticky broadcast. |
| * The intent will have the following extra values:</p> |
| * <ul> |
| * <li><em>time-zone</em> - The java.util.TimeZone.getID() value identifying the new time |
| * zone.</li> |
| * </ul> |
| * |
| * <p class="note"> |
| * Requires the READ_PHONE_STATE permission. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_NETWORK_SET_TIMEZONE |
| = "android.intent.action.NETWORK_SET_TIMEZONE"; |
| |
| /** |
| * <p>Broadcast Action: It indicates the Emergency callback mode blocks datacall/sms |
| * <p class="note">. |
| * This is to pop up a notice to show user that the phone is in emergency callback mode |
| * and atacalls and outgoing sms are blocked. |
| * |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_SHOW_NOTICE_ECM_BLOCK_OTHERS |
| = "android.intent.action.ACTION_SHOW_NOTICE_ECM_BLOCK_OTHERS"; |
| |
| /** |
| * Activity Action: Start this activity to invoke the carrier setup app. |
| * The carrier app must be signed using a certificate that matches the UICC access rules. |
| * |
| * <p class="note">Callers of this should hold the android.permission.INVOKE_CARRIER_SETUP |
| * permission.</p> |
| */ |
| public static final String ACTION_CARRIER_SETUP = "android.intent.action.ACTION_CARRIER_SETUP"; |
| |
| /** |
| * <p>Broadcast Action: Indicates that the action is forbidden by network. |
| * <p class="note"> |
| * This is for the OEM applications to understand about possible provisioning issues. |
| * Used in OMA-DM applications. |
| */ |
| public static final String ACTION_FORBIDDEN_NO_SERVICE_AUTHORIZATION |
| = "android.intent.action.ACTION_FORBIDDEN_NO_SERVICE_AUTHORIZATION"; |
| |
| /** |
| * Broadcast Action: A "secret code" has been entered in the dialer. Secret codes are |
| * of the form {@code *#*#<code>#*#*}. The intent will have the data URI: |
| * |
| * {@code android_secret_code://<code>} |
| */ |
| public static final String SECRET_CODE_ACTION = "android.provider.Telephony.SECRET_CODE"; |
| |
| /** |
| * Broadcast Action: The Service Provider string(s) have been updated. Activities or |
| * services that use these strings should update their display. |
| * The intent will have the following extra values:</p> |
| * |
| * <dl> |
| * <dt>showPlmn</dt><dd>Boolean that indicates whether the PLMN should be shown.</dd> |
| * <dt>plmn</dt><dd>The operator name of the registered network, as a string.</dd> |
| * <dt>showSpn</dt><dd>Boolean that indicates whether the SPN should be shown.</dd> |
| * <dt>spn</dt><dd>The service provider name, as a string.</dd> |
| * </dl> |
| * |
| * Note that <em>showPlmn</em> may indicate that <em>plmn</em> should be displayed, even |
| * though the value for <em>plmn</em> is null. This can happen, for example, if the phone |
| * has not registered to a network yet. In this case the receiver may substitute an |
| * appropriate placeholder string (eg, "No service"). |
| * |
| * It is recommended to display <em>plmn</em> before / above <em>spn</em> if |
| * both are displayed. |
| * |
| * <p>Note: this is a protected intent that can only be sent by the system. |
| */ |
| public static final String SPN_STRINGS_UPDATED_ACTION = |
| "android.provider.Telephony.SPN_STRINGS_UPDATED"; |
| |
| public static final String EXTRA_SHOW_PLMN = "showPlmn"; |
| public static final String EXTRA_PLMN = "plmn"; |
| public static final String EXTRA_SHOW_SPN = "showSpn"; |
| public static final String EXTRA_SPN = "spn"; |
| |
| /** |
| * <p>Broadcast Action: It indicates one column of a subinfo record has been changed |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_SUBINFO_CONTENT_CHANGE |
| = "android.intent.action.ACTION_SUBINFO_CONTENT_CHANGE"; |
| |
| /** |
| * <p>Broadcast Action: It indicates subinfo record update is completed |
| * when SIM inserted state change |
| * <p class="note">This is a protected intent that can only be sent |
| * by the system. |
| */ |
| public static final String ACTION_SUBINFO_RECORD_UPDATED |
| = "android.intent.action.ACTION_SUBINFO_RECORD_UPDATED"; |
| |
| /** |
| * Broadcast Action: The default subscription has changed. This has the following |
| * extra values:</p> |
| * <ul> |
| * <li><em>subscription</em> - A int, the current default subscription.</li> |
| * </ul> |
| */ |
| public static final String ACTION_DEFAULT_SUBSCRIPTION_CHANGED |
| = "android.intent.action.ACTION_DEFAULT_SUBSCRIPTION_CHANGED"; |
| |
| /** |
| * Broadcast Action: The default data subscription has changed. This has the following |
| * extra values:</p> |
| * <ul> |
| * <li><em>subscription</em> - A int, the current data default subscription.</li> |
| * </ul> |
| */ |
| public static final String ACTION_DEFAULT_DATA_SUBSCRIPTION_CHANGED |
| = "android.intent.action.ACTION_DEFAULT_DATA_SUBSCRIPTION_CHANGED"; |
| |
| /** |
| * Broadcast Action: The default voice subscription has changed. This has the following |
| * extra values:</p> |
| * <ul> |
| * <li><em>subscription</em> - A int, the current voice default subscription.</li> |
| * </ul> |
| */ |
| public static final String ACTION_DEFAULT_VOICE_SUBSCRIPTION_CHANGED |
| = "android.intent.action.ACTION_DEFAULT_VOICE_SUBSCRIPTION_CHANGED"; |
| |
| /** |
| * Broadcast Action: The default sms subscription has changed. This has the following |
| * extra values:</p> |
| * <ul> |
| * <li><em>subscription</em> - A int, the current sms default subscription.</li> |
| * </ul> |
| */ |
| public static final String ACTION_DEFAULT_SMS_SUBSCRIPTION_CHANGED |
| = "android.intent.action.ACTION_DEFAULT_SMS_SUBSCRIPTION_CHANGED"; |
| |
| /* |
| * Broadcast Action: An attempt to set phone radio type and access technology has changed. |
| * This has the following extra values: |
| * <ul> |
| * <li><em>phones radio access family </em> - A RadioAccessFamily |
| * array, contain phone ID and new radio access family for each phone.</li> |
| * </ul> |
| */ |
| public static final String ACTION_SET_RADIO_CAPABILITY_DONE = |
| "android.intent.action.ACTION_SET_RADIO_CAPABILITY_DONE"; |
| |
| public static final String EXTRA_RADIO_ACCESS_FAMILY = "rafs"; |
| |
| /* |
| * Broadcast Action: An attempt to set phone radio access family has failed. |
| */ |
| public static final String ACTION_SET_RADIO_CAPABILITY_FAILED = |
| "android.intent.action.ACTION_SET_RADIO_CAPABILITY_FAILED"; |
| } |
