| /* |
| * Copyright (C) 2009 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.bluetooth; |
| |
| import android.os.Handler; |
| import android.os.ParcelUuid; |
| import android.util.Log; |
| |
| import java.io.Closeable; |
| import java.io.IOException; |
| |
| /** |
| * A listening Bluetooth socket. |
| * |
| * <p>The interface for Bluetooth Sockets is similar to that of TCP sockets: |
| * {@link java.net.Socket} and {@link java.net.ServerSocket}. On the server |
| * side, use a {@link BluetoothServerSocket} to create a listening server |
| * socket. When a connection is accepted by the {@link BluetoothServerSocket}, |
| * it will return a new {@link BluetoothSocket} to manage the connection. |
| * On the client side, use a single {@link BluetoothSocket} to both initiate |
| * an outgoing connection and to manage the connection. |
| * |
| * <p>The most common type of Bluetooth socket is RFCOMM, which is the type |
| * supported by the Android APIs. RFCOMM is a connection-oriented, streaming |
| * transport over Bluetooth. It is also known as the Serial Port Profile (SPP). |
| * |
| * <p>To create a listening {@link BluetoothServerSocket} that's ready for |
| * incoming connections, use |
| * {@link BluetoothAdapter#listenUsingRfcommWithServiceRecord |
| * BluetoothAdapter.listenUsingRfcommWithServiceRecord()}. Then call |
| * {@link #accept()} to listen for incoming connection requests. This call |
| * will block until a connection is established, at which point, it will return |
| * a {@link BluetoothSocket} to manage the connection. Once the {@link |
| * BluetoothSocket} is acquired, it's a good idea to call {@link #close()} on |
| * the {@link BluetoothServerSocket} when it's no longer needed for accepting |
| * connections. Closing the {@link BluetoothServerSocket} will <em>not</em> |
| * close the returned {@link BluetoothSocket}. |
| * |
| * <p>{@link BluetoothServerSocket} is thread |
| * safe. In particular, {@link #close} will always immediately abort ongoing |
| * operations and close the server socket. |
| * |
| * <p class="note"><strong>Note:</strong> |
| * Requires the {@link android.Manifest.permission#BLUETOOTH} permission. |
| * |
| * <div class="special reference"> |
| * <h3>Developer Guides</h3> |
| * <p>For more information about using Bluetooth, read the |
| * <a href="{@docRoot}guide/topics/wireless/bluetooth.html">Bluetooth</a> developer guide.</p> |
| * </div> |
| * |
| * {@see BluetoothSocket} |
| */ |
| public final class BluetoothServerSocket implements Closeable { |
| |
| private static final String TAG = "BluetoothServerSocket"; |
| /*package*/ final BluetoothSocket mSocket; |
| private Handler mHandler; |
| private int mMessage; |
| private int mChannel; |
| |
| /** |
| * Construct a socket for incoming connections. |
| * @param type type of socket |
| * @param auth require the remote device to be authenticated |
| * @param encrypt require the connection to be encrypted |
| * @param port remote port |
| * @throws IOException On error, for example Bluetooth not available, or |
| * insufficient privileges |
| */ |
| /*package*/ BluetoothServerSocket(int type, boolean auth, boolean encrypt, int port) |
| throws IOException { |
| mChannel = port; |
| mSocket = new BluetoothSocket(type, -1, auth, encrypt, null, port, null); |
| if (port == BluetoothAdapter.SOCKET_CHANNEL_AUTO_STATIC_NO_SDP) { |
| mSocket.setExcludeSdp(true); |
| } |
| } |
| |
| /** |
| * Construct a socket for incoming connections. |
| * @param type type of socket |
| * @param auth require the remote device to be authenticated |
| * @param encrypt require the connection to be encrypted |
| * @param port remote port |
| * @param mitm enforce man-in-the-middle protection for authentication. |
| * @param min16DigitPin enforce a minimum length of 16 digits for a sec mode 2 connection |
| * @throws IOException On error, for example Bluetooth not available, or |
| * insufficient privileges |
| */ |
| /*package*/ BluetoothServerSocket(int type, boolean auth, boolean encrypt, int port, |
| boolean mitm, boolean min16DigitPin) |
| throws IOException { |
| mChannel = port; |
| mSocket = new BluetoothSocket(type, -1, auth, encrypt, null, port, null, mitm, |
| min16DigitPin); |
| if(port == BluetoothAdapter.SOCKET_CHANNEL_AUTO_STATIC_NO_SDP) { |
| mSocket.setExcludeSdp(true); |
| } |
| } |
| |
| /** |
| * Construct a socket for incoming connections. |
| * @param type type of socket |
| * @param auth require the remote device to be authenticated |
| * @param encrypt require the connection to be encrypted |
| * @param uuid uuid |
| * @throws IOException On error, for example Bluetooth not available, or |
| * insufficient privileges |
| */ |
| /*package*/ BluetoothServerSocket(int type, boolean auth, boolean encrypt, ParcelUuid uuid) |
| throws IOException { |
| mSocket = new BluetoothSocket(type, -1, auth, encrypt, null, -1, uuid); |
| // TODO: This is the same as mChannel = -1 - is this intentional? |
| mChannel = mSocket.getPort(); |
| } |
| |
| |
| /** |
| * Block until a connection is established. |
| * <p>Returns a connected {@link BluetoothSocket} on successful connection. |
| * <p>Once this call returns, it can be called again to accept subsequent |
| * incoming connections. |
| * <p>{@link #close} can be used to abort this call from another thread. |
| * @return a connected {@link BluetoothSocket} |
| * @throws IOException on error, for example this call was aborted, or |
| * timeout |
| */ |
| public BluetoothSocket accept() throws IOException { |
| return accept(-1); |
| } |
| |
| /** |
| * Block until a connection is established, with timeout. |
| * <p>Returns a connected {@link BluetoothSocket} on successful connection. |
| * <p>Once this call returns, it can be called again to accept subsequent |
| * incoming connections. |
| * <p>{@link #close} can be used to abort this call from another thread. |
| * @return a connected {@link BluetoothSocket} |
| * @throws IOException on error, for example this call was aborted, or |
| * timeout |
| */ |
| public BluetoothSocket accept(int timeout) throws IOException { |
| return mSocket.accept(timeout); |
| } |
| |
| /** |
| * Immediately close this socket, and release all associated resources. |
| * <p>Causes blocked calls on this socket in other threads to immediately |
| * throw an IOException. |
| * <p>Closing the {@link BluetoothServerSocket} will <em>not</em> |
| * close any {@link BluetoothSocket} received from {@link #accept()}. |
| */ |
| public void close() throws IOException { |
| synchronized (this) { |
| if (mHandler != null) { |
| mHandler.obtainMessage(mMessage).sendToTarget(); |
| } |
| } |
| mSocket.close(); |
| } |
| |
| /*package*/ synchronized void setCloseHandler(Handler handler, int message) { |
| mHandler = handler; |
| mMessage = message; |
| } |
| /*package*/ void setServiceName(String ServiceName) { |
| mSocket.setServiceName(ServiceName); |
| } |
| |
| /** |
| * Returns the channel on which this socket is bound. |
| * @hide |
| */ |
| public int getChannel() { |
| return mChannel; |
| } |
| |
| /** |
| * Sets the channel on which future sockets are bound. |
| * Currently used only when a channel is auto generated. |
| */ |
| /*package*/ void setChannel(int newChannel) { |
| /* TODO: From a design/architecture perspective this is wrong. |
| * The bind operation should be conducted through this class |
| * and the resulting port should be kept in mChannel, and |
| * not set from BluetoothAdapter. */ |
| if(mSocket != null) { |
| if(mSocket.getPort() != newChannel) { |
| Log.w(TAG,"The port set is different that the underlying port. mSocket.getPort(): " |
| + mSocket.getPort() + " requested newChannel: " + newChannel); |
| } |
| } |
| mChannel = newChannel; |
| } |
| |
| @Override |
| public String toString() { |
| StringBuilder sb = new StringBuilder(); |
| sb.append("ServerSocket: Type: "); |
| switch(mSocket.getConnectionType()) { |
| case BluetoothSocket.TYPE_RFCOMM: |
| { |
| sb.append("TYPE_RFCOMM"); |
| break; |
| } |
| case BluetoothSocket.TYPE_L2CAP: |
| { |
| sb.append("TYPE_L2CAP"); |
| break; |
| } |
| case BluetoothSocket.TYPE_SCO: |
| { |
| sb.append("TYPE_SCO"); |
| break; |
| } |
| } |
| sb.append(" Channel: ").append(mChannel); |
| return sb.toString(); |
| } |
| } |
