| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package com.android.internal.telephony; |
| |
| import android.app.PendingIntent; |
| import android.content.Intent; |
| import android.os.Bundle; |
| import android.os.IBinder; |
| import android.os.Messenger; |
| import android.os.ResultReceiver; |
| import android.net.NetworkStats; |
| import android.net.Uri; |
| import android.service.carrier.CarrierIdentifier; |
| import android.telecom.PhoneAccount; |
| import android.telecom.PhoneAccountHandle; |
| import android.telephony.CellInfo; |
| import android.telephony.ClientRequestStats; |
| import android.telephony.IccOpenLogicalChannelResponse; |
| import android.telephony.ModemActivityInfo; |
| import android.telephony.NeighboringCellInfo; |
| import android.telephony.NetworkScanRequest; |
| import android.telephony.RadioAccessFamily; |
| import android.telephony.ServiceState; |
| import android.telephony.SignalStrength; |
| import android.telephony.TelephonyHistogram; |
| import android.telephony.VisualVoicemailSmsFilterSettings; |
| import com.android.ims.internal.IImsServiceController; |
| import com.android.ims.internal.IImsServiceFeatureListener; |
| import com.android.internal.telephony.CellNetworkScanResult; |
| import com.android.internal.telephony.OperatorInfo; |
| |
| import java.util.List; |
| |
| |
| /** |
| * Interface used to interact with the phone. Mostly this is used by the |
| * TelephonyManager class. A few places are still using this directly. |
| * Please clean them up if possible and use TelephonyManager instead. |
| * |
| * {@hide} |
| */ |
| interface ITelephony { |
| |
| /** |
| * Dial a number. This doesn't place the call. It displays |
| * the Dialer screen. |
| * @param number the number to be dialed. If null, this |
| * would display the Dialer screen with no number pre-filled. |
| */ |
| void dial(String number); |
| |
| /** |
| * Place a call to the specified number. |
| * @param callingPackage The package making the call. |
| * @param number the number to be called. |
| */ |
| void call(String callingPackage, String number); |
| |
| /** |
| * End call if there is a call in progress, otherwise does nothing. |
| * |
| * @return whether it hung up |
| */ |
| boolean endCall(); |
| |
| /** |
| * End call on particular subId or go to the Home screen |
| * @param subId user preferred subId. |
| * @return whether it hung up |
| */ |
| boolean endCallForSubscriber(int subId); |
| |
| /** |
| * Answer the currently-ringing call. |
| * |
| * If there's already a current active call, that call will be |
| * automatically put on hold. If both lines are currently in use, the |
| * current active call will be ended. |
| * |
| * TODO: provide a flag to let the caller specify what policy to use |
| * if both lines are in use. (The current behavior is hardwired to |
| * "answer incoming, end ongoing", which is how the CALL button |
| * is specced to behave.) |
| * |
| * TODO: this should be a oneway call (especially since it's called |
| * directly from the key queue thread). |
| */ |
| void answerRingingCall(); |
| |
| /** |
| * Answer the currently-ringing call on particular subId . |
| * |
| * If there's already a current active call, that call will be |
| * automatically put on hold. If both lines are currently in use, the |
| * current active call will be ended. |
| * |
| * TODO: provide a flag to let the caller specify what policy to use |
| * if both lines are in use. (The current behavior is hardwired to |
| * "answer incoming, end ongoing", which is how the CALL button |
| * is specced to behave.) |
| * |
| * TODO: this should be a oneway call (especially since it's called |
| * directly from the key queue thread). |
| */ |
| void answerRingingCallForSubscriber(int subId); |
| |
| /** |
| * Silence the ringer if an incoming call is currently ringing. |
| * (If vibrating, stop the vibrator also.) |
| * |
| * It's safe to call this if the ringer has already been silenced, or |
| * even if there's no incoming call. (If so, this method will do nothing.) |
| * |
| * TODO: this should be a oneway call too (see above). |
| * (Actually *all* the methods here that return void can |
| * probably be oneway.) |
| */ |
| void silenceRinger(); |
| |
| /** |
| * Check if we are in either an active or holding call |
| * @param callingPackage the name of the package making the call. |
| * @return true if the phone state is OFFHOOK. |
| */ |
| boolean isOffhook(String callingPackage); |
| |
| /** |
| * Check if a particular subId has an active or holding call |
| * |
| * @param subId user preferred subId. |
| * @param callingPackage the name of the package making the call. |
| * @return true if the phone state is OFFHOOK. |
| */ |
| boolean isOffhookForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Check if an incoming phone call is ringing or call waiting |
| * on a particular subId. |
| * |
| * @param subId user preferred subId. |
| * @param callingPackage the name of the package making the call. |
| * @return true if the phone state is RINGING. |
| */ |
| boolean isRingingForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Check if an incoming phone call is ringing or call waiting. |
| * @param callingPackage the name of the package making the call. |
| * @return true if the phone state is RINGING. |
| */ |
| boolean isRinging(String callingPackage); |
| |
| /** |
| * Check if the phone is idle. |
| * @param callingPackage the name of the package making the call. |
| * @return true if the phone state is IDLE. |
| */ |
| boolean isIdle(String callingPackage); |
| |
| /** |
| * Check if the phone is idle on a particular subId. |
| * |
| * @param subId user preferred subId. |
| * @param callingPackage the name of the package making the call. |
| * @return true if the phone state is IDLE. |
| */ |
| boolean isIdleForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Check to see if the radio is on or not. |
| * @param callingPackage the name of the package making the call. |
| * @return returns true if the radio is on. |
| */ |
| boolean isRadioOn(String callingPackage); |
| |
| /** |
| * Check to see if the radio is on or not on particular subId. |
| * @param subId user preferred subId. |
| * @param callingPackage the name of the package making the call. |
| * @return returns true if the radio is on. |
| */ |
| boolean isRadioOnForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Supply a pin to unlock the SIM. Blocks until a result is determined. |
| * @param pin The pin to check. |
| * @return whether the operation was a success. |
| */ |
| boolean supplyPin(String pin); |
| |
| /** |
| * Supply a pin to unlock the SIM for particular subId. |
| * Blocks until a result is determined. |
| * @param pin The pin to check. |
| * @param subId user preferred subId. |
| * @return whether the operation was a success. |
| */ |
| boolean supplyPinForSubscriber(int subId, String pin); |
| |
| /** |
| * Supply puk to unlock the SIM and set SIM pin to new pin. |
| * Blocks until a result is determined. |
| * @param puk The puk to check. |
| * pin The new pin to be set in SIM |
| * @return whether the operation was a success. |
| */ |
| boolean supplyPuk(String puk, String pin); |
| |
| /** |
| * Supply puk to unlock the SIM and set SIM pin to new pin. |
| * Blocks until a result is determined. |
| * @param puk The puk to check. |
| * pin The new pin to be set in SIM |
| * @param subId user preferred subId. |
| * @return whether the operation was a success. |
| */ |
| boolean supplyPukForSubscriber(int subId, String puk, String pin); |
| |
| /** |
| * Supply a pin to unlock the SIM. Blocks until a result is determined. |
| * Returns a specific success/error code. |
| * @param pin The pin to check. |
| * @return retValue[0] = Phone.PIN_RESULT_SUCCESS on success. Otherwise error code |
| * retValue[1] = number of attempts remaining if known otherwise -1 |
| */ |
| int[] supplyPinReportResult(String pin); |
| |
| /** |
| * Supply a pin to unlock the SIM. Blocks until a result is determined. |
| * Returns a specific success/error code. |
| * @param pin The pin to check. |
| * @return retValue[0] = Phone.PIN_RESULT_SUCCESS on success. Otherwise error code |
| * retValue[1] = number of attempts remaining if known otherwise -1 |
| */ |
| int[] supplyPinReportResultForSubscriber(int subId, String pin); |
| |
| /** |
| * Supply puk to unlock the SIM and set SIM pin to new pin. |
| * Blocks until a result is determined. |
| * Returns a specific success/error code |
| * @param puk The puk to check |
| * pin The pin to check. |
| * @return retValue[0] = Phone.PIN_RESULT_SUCCESS on success. Otherwise error code |
| * retValue[1] = number of attempts remaining if known otherwise -1 |
| */ |
| int[] supplyPukReportResult(String puk, String pin); |
| |
| /** |
| * Supply puk to unlock the SIM and set SIM pin to new pin. |
| * Blocks until a result is determined. |
| * Returns a specific success/error code |
| * @param puk The puk to check |
| * pin The pin to check. |
| * @return retValue[0] = Phone.PIN_RESULT_SUCCESS on success. Otherwise error code |
| * retValue[1] = number of attempts remaining if known otherwise -1 |
| */ |
| int[] supplyPukReportResultForSubscriber(int subId, String puk, String pin); |
| |
| /** |
| * Handles PIN MMI commands (PIN/PIN2/PUK/PUK2), which are initiated |
| * without SEND (so <code>dial</code> is not appropriate). |
| * |
| * @param dialString the MMI command to be executed. |
| * @return true if MMI command is executed. |
| */ |
| boolean handlePinMmi(String dialString); |
| |
| |
| /** |
| * Handles USSD commands. |
| * |
| * @param subId The subscription to use. |
| * @param ussdRequest the USSD command to be executed. |
| * @param wrappedCallback receives a callback result. |
| */ |
| void handleUssdRequest(int subId, String ussdRequest, in ResultReceiver wrappedCallback); |
| |
| /** |
| * Handles PIN MMI commands (PIN/PIN2/PUK/PUK2), which are initiated |
| * without SEND (so <code>dial</code> is not appropriate) for |
| * a particular subId. |
| * @param dialString the MMI command to be executed. |
| * @param subId user preferred subId. |
| * @return true if MMI command is executed. |
| */ |
| boolean handlePinMmiForSubscriber(int subId, String dialString); |
| |
| /** |
| * Toggles the radio on or off. |
| */ |
| void toggleRadioOnOff(); |
| |
| /** |
| * Toggles the radio on or off on particular subId. |
| * @param subId user preferred subId. |
| */ |
| void toggleRadioOnOffForSubscriber(int subId); |
| |
| /** |
| * Set the radio to on or off |
| */ |
| boolean setRadio(boolean turnOn); |
| |
| /** |
| * Set the radio to on or off on particular subId. |
| * @param subId user preferred subId. |
| */ |
| boolean setRadioForSubscriber(int subId, boolean turnOn); |
| |
| /** |
| * Set the radio to on or off unconditionally |
| */ |
| boolean setRadioPower(boolean turnOn); |
| |
| /** |
| * Request to update location information in service state |
| */ |
| void updateServiceLocation(); |
| |
| /** |
| * Request to update location information for a subscrition in service state |
| * @param subId user preferred subId. |
| */ |
| void updateServiceLocationForSubscriber(int subId); |
| |
| /** |
| * Enable location update notifications. |
| */ |
| void enableLocationUpdates(); |
| |
| /** |
| * Enable location update notifications. |
| * @param subId user preferred subId. |
| */ |
| void enableLocationUpdatesForSubscriber(int subId); |
| |
| /** |
| * Disable location update notifications. |
| */ |
| void disableLocationUpdates(); |
| |
| /** |
| * Disable location update notifications. |
| * @param subId user preferred subId. |
| */ |
| void disableLocationUpdatesForSubscriber(int subId); |
| |
| /** |
| * Allow mobile data connections. |
| */ |
| boolean enableDataConnectivity(); |
| |
| /** |
| * Disallow mobile data connections. |
| */ |
| boolean disableDataConnectivity(); |
| |
| /** |
| * Report whether data connectivity is possible. |
| */ |
| boolean isDataConnectivityPossible(int subId); |
| |
| Bundle getCellLocation(String callingPkg); |
| |
| /** |
| * Returns the ISO country code equivalent of the current registered |
| * operator's MCC (Mobile Country Code). |
| * @see android.telephony.TelephonyManager#getNetworkCountryIso |
| */ |
| String getNetworkCountryIsoForPhone(int phoneId); |
| |
| /** |
| * Returns the neighboring cell information of the device. |
| */ |
| List<NeighboringCellInfo> getNeighboringCellInfo(String callingPkg); |
| |
| int getCallState(); |
| |
| /** |
| * Returns the call state for a slot. |
| */ |
| int getCallStateForSlot(int slotIndex); |
| |
| int getDataActivity(); |
| int getDataState(); |
| |
| /** |
| * Returns the current active phone type as integer. |
| * Returns TelephonyManager.PHONE_TYPE_CDMA if RILConstants.CDMA_PHONE |
| * and TelephonyManager.PHONE_TYPE_GSM if RILConstants.GSM_PHONE |
| */ |
| int getActivePhoneType(); |
| |
| /** |
| * Returns the current active phone type as integer for particular slot. |
| * Returns TelephonyManager.PHONE_TYPE_CDMA if RILConstants.CDMA_PHONE |
| * and TelephonyManager.PHONE_TYPE_GSM if RILConstants.GSM_PHONE |
| * @param slotIndex - slot to query. |
| */ |
| int getActivePhoneTypeForSlot(int slotIndex); |
| |
| /** |
| * Returns the CDMA ERI icon index to display |
| * @param callingPackage package making the call. |
| */ |
| int getCdmaEriIconIndex(String callingPackage); |
| |
| /** |
| * Returns the CDMA ERI icon index to display on particular subId. |
| * @param subId user preferred subId. |
| * @param callingPackage package making the call. |
| */ |
| int getCdmaEriIconIndexForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Returns the CDMA ERI icon mode, |
| * 0 - ON |
| * 1 - FLASHING |
| * @param callingPackage package making the call. |
| */ |
| int getCdmaEriIconMode(String callingPackage); |
| |
| /** |
| * Returns the CDMA ERI icon mode on particular subId, |
| * 0 - ON |
| * 1 - FLASHING |
| * @param subId user preferred subId. |
| * @param callingPackage package making the call. |
| */ |
| int getCdmaEriIconModeForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Returns the CDMA ERI text, |
| * @param callingPackage package making the call. |
| */ |
| String getCdmaEriText(String callingPackage); |
| |
| /** |
| * Returns the CDMA ERI text for particular subId, |
| * @param subId user preferred subId. |
| * @param callingPackage package making the call. |
| */ |
| String getCdmaEriTextForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Returns true if OTA service provisioning needs to run. |
| * Only relevant on some technologies, others will always |
| * return false. |
| */ |
| boolean needsOtaServiceProvisioning(); |
| |
| /** |
| * Sets the voicemail number for a particular subscriber. |
| */ |
| boolean setVoiceMailNumber(int subId, String alphaTag, String number); |
| |
| /** |
| * Sets the voice activation state for a particular subscriber. |
| */ |
| void setVoiceActivationState(int subId, int activationState); |
| |
| /** |
| * Sets the data activation state for a particular subscriber. |
| */ |
| void setDataActivationState(int subId, int activationState); |
| |
| /** |
| * Returns the voice activation state for a particular subscriber. |
| * @param subId user preferred sub |
| * @param callingPackage package queries voice activation state |
| */ |
| int getVoiceActivationState(int subId, String callingPackage); |
| |
| /** |
| * Returns the data activation state for a particular subscriber. |
| * @param subId user preferred sub |
| * @param callingPackage package queris data activation state |
| */ |
| int getDataActivationState(int subId, String callingPackage); |
| |
| /** |
| * Returns the unread count of voicemails |
| */ |
| int getVoiceMessageCount(); |
| |
| /** |
| * Returns the unread count of voicemails for a subId. |
| * @param subId user preferred subId. |
| * Returns the unread count of voicemails |
| */ |
| int getVoiceMessageCountForSubscriber(int subId); |
| |
| /** |
| * Returns true if current state supports both voice and data |
| * simultaneously. This can change based on location or network condition. |
| */ |
| boolean isConcurrentVoiceAndDataAllowed(int subId); |
| |
| Bundle getVisualVoicemailSettings(String callingPackage, int subId); |
| |
| String getVisualVoicemailPackageName(String callingPackage, int subId); |
| |
| // Not oneway, caller needs to make sure the vaule is set before receiving a SMS |
| void enableVisualVoicemailSmsFilter(String callingPackage, int subId, |
| in VisualVoicemailSmsFilterSettings settings); |
| |
| oneway void disableVisualVoicemailSmsFilter(String callingPackage, int subId); |
| |
| // Get settings set by the calling package |
| VisualVoicemailSmsFilterSettings getVisualVoicemailSmsFilterSettings(String callingPackage, |
| int subId); |
| |
| /** |
| * Get settings set by the current default dialer, Internal use only. |
| * Requires READ_PRIVILEGED_PHONE_STATE permission. |
| */ |
| VisualVoicemailSmsFilterSettings getActiveVisualVoicemailSmsFilterSettings(int subId); |
| |
| /** |
| * Send a visual voicemail SMS. Internal use only. |
| * Requires caller to be the default dialer and have SEND_SMS permission |
| */ |
| void sendVisualVoicemailSmsForSubscriber(in String callingPackage, in int subId, |
| in String number, in int port, in String text, in PendingIntent sentIntent); |
| |
| // Send the special dialer code. The IPC caller must be the current default dialer. |
| void sendDialerSpecialCode(String callingPackageName, String inputCode); |
| |
| /** |
| * Returns the network type for data transmission |
| * Legacy call, permission-free |
| */ |
| int getNetworkType(); |
| |
| /** |
| * Returns the network type of a subId. |
| * @param subId user preferred subId. |
| * @param callingPackage package making the call. |
| */ |
| int getNetworkTypeForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Returns the network type for data transmission |
| * @param callingPackage package making the call. |
| */ |
| int getDataNetworkType(String callingPackage); |
| |
| /** |
| * Returns the data network type of a subId |
| * @param subId user preferred subId. |
| * @param callingPackage package making the call. |
| */ |
| int getDataNetworkTypeForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Returns the voice network type of a subId |
| * @param subId user preferred subId. |
| * @param callingPackage package making the call. |
| * Returns the network type |
| */ |
| int getVoiceNetworkTypeForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Return true if an ICC card is present |
| */ |
| boolean hasIccCard(); |
| |
| /** |
| * Return true if an ICC card is present for a subId. |
| * @param slotIndex user preferred slotIndex. |
| * Return true if an ICC card is present |
| */ |
| boolean hasIccCardUsingSlotIndex(int slotIndex); |
| |
| /** |
| * Return if the current radio is LTE on CDMA. This |
| * is a tri-state return value as for a period of time |
| * the mode may be unknown. |
| * |
| * @param callingPackage the name of the calling package |
| * @return {@link Phone#LTE_ON_CDMA_UNKNOWN}, {@link Phone#LTE_ON_CDMA_FALSE} |
| * or {@link PHone#LTE_ON_CDMA_TRUE} |
| */ |
| int getLteOnCdmaMode(String callingPackage); |
| |
| /** |
| * Return if the current radio is LTE on CDMA. This |
| * is a tri-state return value as for a period of time |
| * the mode may be unknown. |
| * |
| * @param callingPackage the name of the calling package |
| * @return {@link Phone#LTE_ON_CDMA_UNKNOWN}, {@link Phone#LTE_ON_CDMA_FALSE} |
| * or {@link PHone#LTE_ON_CDMA_TRUE} |
| */ |
| int getLteOnCdmaModeForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Returns the all observed cell information of the device. |
| */ |
| List<CellInfo> getAllCellInfo(String callingPkg); |
| |
| /** |
| * Sets minimum time in milli-seconds between onCellInfoChanged |
| */ |
| void setCellInfoListRate(int rateInMillis); |
| |
| /** |
| * get default sim |
| * @return sim id |
| */ |
| int getDefaultSim(); |
| |
| /** |
| * Opens a logical channel to the ICC card. |
| * |
| * Input parameters equivalent to TS 27.007 AT+CCHO command. |
| * |
| * @param subId The subscription to use. |
| * @param callingPackage the name of the package making the call. |
| * @param AID Application id. See ETSI 102.221 and 101.220. |
| * @param p2 P2 parameter (described in ISO 7816-4). |
| * @return an IccOpenLogicalChannelResponse object. |
| */ |
| IccOpenLogicalChannelResponse iccOpenLogicalChannel( |
| int subId, String callingPackage, String AID, int p2); |
| |
| /** |
| * Closes a previously opened logical channel to the ICC card. |
| * |
| * Input parameters equivalent to TS 27.007 AT+CCHC command. |
| * |
| * @param subId The subscription to use. |
| * @param channel is the channel id to be closed as retruned by a |
| * successful iccOpenLogicalChannel. |
| * @return true if the channel was closed successfully. |
| */ |
| boolean iccCloseLogicalChannel(int subId, int channel); |
| |
| /** |
| * Transmit an APDU to the ICC card over a logical channel. |
| * |
| * Input parameters equivalent to TS 27.007 AT+CGLA command. |
| * |
| * @param subId The subscription to use. |
| * @param channel is the channel id to be closed as retruned by a |
| * successful iccOpenLogicalChannel. |
| * @param cla Class of the APDU command. |
| * @param instruction Instruction of the APDU command. |
| * @param p1 P1 value of the APDU command. |
| * @param p2 P2 value of the APDU command. |
| * @param p3 P3 value of the APDU command. If p3 is negative a 4 byte APDU |
| * is sent to the SIM. |
| * @param data Data to be sent with the APDU. |
| * @return The APDU response from the ICC card with the status appended at |
| * the end. |
| */ |
| String iccTransmitApduLogicalChannel(int subId, int channel, int cla, int instruction, |
| int p1, int p2, int p3, String data); |
| |
| /** |
| * Transmit an APDU to the ICC card over the basic channel. |
| * |
| * Input parameters equivalent to TS 27.007 AT+CSIM command. |
| * |
| * @param subId The subscription to use. |
| * @param cla Class of the APDU command. |
| * @param instruction Instruction of the APDU command. |
| * @param p1 P1 value of the APDU command. |
| * @param p2 P2 value of the APDU command. |
| * @param p3 P3 value of the APDU command. If p3 is negative a 4 byte APDU |
| * is sent to the SIM. |
| * @param data Data to be sent with the APDU. |
| * @return The APDU response from the ICC card with the status appended at |
| * the end. |
| */ |
| String iccTransmitApduBasicChannel(int subId, int cla, int instruction, |
| int p1, int p2, int p3, String data); |
| |
| /** |
| * Returns the response APDU for a command APDU sent through SIM_IO. |
| * |
| * @param subId The subscription to use. |
| * @param fileID |
| * @param command |
| * @param p1 P1 value of the APDU command. |
| * @param p2 P2 value of the APDU command. |
| * @param p3 P3 value of the APDU command. |
| * @param filePath |
| * @return The APDU response. |
| */ |
| byte[] iccExchangeSimIO(int subId, int fileID, int command, int p1, int p2, int p3, |
| String filePath); |
| |
| /** |
| * Send ENVELOPE to the SIM and returns the response. |
| * |
| * @param subId The subscription to use. |
| * @param contents String containing SAT/USAT response in hexadecimal |
| * format starting with command tag. See TS 102 223 for |
| * details. |
| * @return The APDU response from the ICC card, with the last 4 bytes |
| * being the status word. If the command fails, returns an empty |
| * string. |
| */ |
| String sendEnvelopeWithStatus(int subId, String content); |
| |
| /** |
| * Read one of the NV items defined in {@link RadioNVItems} / {@code ril_nv_items.h}. |
| * Used for device configuration by some CDMA operators. |
| * |
| * @param itemID the ID of the item to read. |
| * @return the NV item as a String, or null on any failure. |
| */ |
| String nvReadItem(int itemID); |
| |
| /** |
| * Write one of the NV items defined in {@link RadioNVItems} / {@code ril_nv_items.h}. |
| * Used for device configuration by some CDMA operators. |
| * |
| * @param itemID the ID of the item to read. |
| * @param itemValue the value to write, as a String. |
| * @return true on success; false on any failure. |
| */ |
| boolean nvWriteItem(int itemID, String itemValue); |
| |
| /** |
| * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage. |
| * Used for device configuration by some CDMA operators. |
| * |
| * @param preferredRoamingList byte array containing the new PRL. |
| * @return true on success; false on any failure. |
| */ |
| boolean nvWriteCdmaPrl(in byte[] preferredRoamingList); |
| |
| /** |
| * Perform the specified type of NV config reset. The radio will be taken offline |
| * and the device must be rebooted after the operation. Used for device |
| * configuration by some CDMA operators. |
| * |
| * @param resetType the type of reset to perform (1 == factory reset; 2 == NV-only reset). |
| * @return true on success; false on any failure. |
| */ |
| boolean nvResetConfig(int resetType); |
| |
| /* |
| * Get the calculated preferred network type. |
| * Used for device configuration by some CDMA operators. |
| * @param callingPackage The package making the call. |
| * |
| * @return the calculated preferred network type, defined in RILConstants.java. |
| */ |
| int getCalculatedPreferredNetworkType(String callingPackage); |
| |
| /* |
| * Get the preferred network type. |
| * Used for device configuration by some CDMA operators. |
| * |
| * @param subId the id of the subscription to query. |
| * @return the preferred network type, defined in RILConstants.java. |
| */ |
| int getPreferredNetworkType(int subId); |
| |
| /** |
| * Check TETHER_DUN_REQUIRED and TETHER_DUN_APN settings, net.tethering.noprovisioning |
| * SystemProperty, and config_tether_apndata to decide whether DUN APN is required for |
| * tethering. |
| * |
| * @return 0: Not required. 1: required. 2: Not set. |
| */ |
| int getTetherApnRequired(); |
| |
| /** |
| * Get ImsServiceController binder from ImsResolver that corresponds to the subId and feature |
| * requested as well as registering the ImsServiceController for callbacks using the |
| * IImsServiceFeatureListener interface. |
| */ |
| IImsServiceController getImsServiceControllerAndListen(int slotIndex, int feature, |
| IImsServiceFeatureListener callback); |
| |
| /** |
| * Set the network selection mode to automatic. |
| * |
| * @param subId the id of the subscription to update. |
| */ |
| void setNetworkSelectionModeAutomatic(int subId); |
| |
| /** |
| * Perform a radio scan and return the list of avialble networks. |
| * |
| * @param subId the id of the subscription. |
| * @return CellNetworkScanResult containing status of scan and networks. |
| */ |
| CellNetworkScanResult getCellNetworkScanResults(int subId); |
| |
| /** |
| * Perform a radio network scan and return the id of this scan. |
| * |
| * @param subId the id of the subscription. |
| * @param request Defines all the configs for network scan. |
| * @param messenger Callback messages will be sent using this messenger. |
| * @param binder the binder object instantiated in TelephonyManager. |
| * @return An id for this scan. |
| */ |
| int requestNetworkScan(int subId, in NetworkScanRequest request, in Messenger messenger, |
| in IBinder binder); |
| |
| /** |
| * Stop an existing radio network scan. |
| * |
| * @param subId the id of the subscription. |
| * @param scanId The id of the scan that is going to be stopped. |
| */ |
| void stopNetworkScan(int subId, int scanId); |
| |
| /** |
| * Ask the radio to connect to the input network and change selection mode to manual. |
| * |
| * @param subId the id of the subscription. |
| * @param operatorInfo the operator to attach to. |
| * @param persistSelection should the selection persist till reboot or its |
| * turned off? Will also result in notification being not shown to |
| * the user if the signal is lost. |
| * @return true if the request suceeded. |
| */ |
| boolean setNetworkSelectionModeManual(int subId, in OperatorInfo operator, |
| boolean persistSelection); |
| |
| /** |
| * Set the preferred network type. |
| * Used for device configuration by some CDMA operators. |
| * |
| * @param subId the id of the subscription to update. |
| * @param networkType the preferred network type, defined in RILConstants.java. |
| * @return true on success; false on any failure. |
| */ |
| boolean setPreferredNetworkType(int subId, int networkType); |
| |
| /** |
| * User enable/disable Mobile Data. |
| * |
| * @param enable true to turn on, else false |
| */ |
| void setDataEnabled(int subId, boolean enable); |
| |
| /** |
| * Get the user enabled state of Mobile Data. |
| * |
| * @return true on enabled |
| */ |
| boolean getDataEnabled(int subId); |
| |
| /** |
| * Get P-CSCF address from PCO after data connection is established or modified. |
| * @param apnType the apnType, "ims" for IMS APN, "emergency" for EMERGENCY APN |
| * @param callingPackage The package making the call. |
| */ |
| String[] getPcscfAddress(String apnType, String callingPackage); |
| |
| /** |
| * Set IMS registration state |
| */ |
| void setImsRegistrationState(boolean registered); |
| |
| /** |
| * Return MDN string for CDMA phone. |
| * @param subId user preferred subId. |
| */ |
| String getCdmaMdn(int subId); |
| |
| /** |
| * Return MIN string for CDMA phone. |
| * @param subId user preferred subId. |
| */ |
| String getCdmaMin(int subId); |
| |
| /** |
| * Has the calling application been granted special privileges by the carrier. |
| * |
| * If any of the packages in the calling UID has carrier privileges, the |
| * call will return true. This access is granted by the owner of the UICC |
| * card and does not depend on the registered carrier. |
| * |
| * TODO: Add a link to documentation. |
| * |
| * @param subId The subscription to use. |
| * @return carrier privilege status defined in TelephonyManager. |
| */ |
| int getCarrierPrivilegeStatus(int subId); |
| |
| /** |
| * Similar to above, but check for the package whose name is pkgName. |
| */ |
| int checkCarrierPrivilegesForPackage(String pkgName); |
| |
| /** |
| * Similar to above, but check across all phones. |
| */ |
| int checkCarrierPrivilegesForPackageAnyPhone(String pkgName); |
| |
| /** |
| * Returns list of the package names of the carrier apps that should handle the input intent |
| * and have carrier privileges for the given phoneId. |
| * |
| * @param intent Intent that will be sent. |
| * @param phoneId The phoneId on which the carrier app has carrier privileges. |
| * @return list of carrier app package names that can handle the intent on phoneId. |
| * Returns null if there is an error and an empty list if there |
| * are no matching packages. |
| */ |
| List<String> getCarrierPackageNamesForIntentAndPhone(in Intent intent, int phoneId); |
| |
| /** |
| * Set the line 1 phone number string and its alphatag for the current ICCID |
| * for display purpose only, for example, displayed in Phone Status. It won't |
| * change the actual MSISDN/MDN. To unset alphatag or number, pass in a null |
| * value. |
| * |
| * @param subId the subscriber that the alphatag and dialing number belongs to. |
| * @param alphaTag alpha-tagging of the dailing nubmer |
| * @param number The dialing number |
| * @return true if the operation was executed correctly. |
| */ |
| boolean setLine1NumberForDisplayForSubscriber(int subId, String alphaTag, String number); |
| |
| /** |
| * Returns the displayed dialing number string if it was set previously via |
| * {@link #setLine1NumberForDisplay}. Otherwise returns null. |
| * |
| * @param subId whose dialing number for line 1 is returned. |
| * @param callingPackage The package making the call. |
| * @return the displayed dialing number if set, or null if not set. |
| */ |
| String getLine1NumberForDisplay(int subId, String callingPackage); |
| |
| /** |
| * Returns the displayed alphatag of the dialing number if it was set |
| * previously via {@link #setLine1NumberForDisplay}. Otherwise returns null. |
| * |
| * @param subId whose alphatag associated with line 1 is returned. |
| * @param callingPackage The package making the call. |
| * @return the displayed alphatag of the dialing number if set, or null if |
| * not set. |
| */ |
| String getLine1AlphaTagForDisplay(int subId, String callingPackage); |
| |
| String[] getMergedSubscriberIds(String callingPackage); |
| |
| /** |
| * Override the operator branding for the current ICCID. |
| * |
| * Once set, whenever the SIM is present in the device, the service |
| * provider name (SPN) and the operator name will both be replaced by the |
| * brand value input. To unset the value, the same function should be |
| * called with a null brand value. |
| * |
| * <p>Requires Permission: |
| * {@link android.Manifest.permission#MODIFY_PHONE_STATE MODIFY_PHONE_STATE} |
| * or has to be carrier app - see #hasCarrierPrivileges. |
| * |
| * @param subId The subscription to use. |
| * @param brand The brand name to display/set. |
| * @return true if the operation was executed correctly. |
| */ |
| boolean setOperatorBrandOverride(int subId, String brand); |
| |
| /** |
| * Override the roaming indicator for the current ICCID. |
| * |
| * Using this call, the carrier app (see #hasCarrierPrivileges) can override |
| * the platform's notion of a network operator being considered roaming or not. |
| * The change only affects the ICCID that was active when this call was made. |
| * |
| * If null is passed as any of the input, the corresponding value is deleted. |
| * |
| * <p>Requires that the caller have carrier privilege. See #hasCarrierPrivileges. |
| * |
| * @param subId for which the roaming overrides apply. |
| * @param gsmRoamingList - List of MCCMNCs to be considered roaming for 3GPP RATs. |
| * @param gsmNonRoamingList - List of MCCMNCs to be considered not roaming for 3GPP RATs. |
| * @param cdmaRoamingList - List of SIDs to be considered roaming for 3GPP2 RATs. |
| * @param cdmaNonRoamingList - List of SIDs to be considered not roaming for 3GPP2 RATs. |
| * @return true if the operation was executed correctly. |
| */ |
| boolean setRoamingOverride(int subId, in List<String> gsmRoamingList, |
| in List<String> gsmNonRoamingList, in List<String> cdmaRoamingList, |
| in List<String> cdmaNonRoamingList); |
| |
| /** |
| * Returns the result and response from RIL for oem request |
| * |
| * @param oemReq the data is sent to ril. |
| * @param oemResp the respose data from RIL. |
| * @return negative value request was not handled or get error |
| * 0 request was handled succesfully, but no response data |
| * positive value success, data length of response |
| */ |
| int invokeOemRilRequestRaw(in byte[] oemReq, out byte[] oemResp); |
| |
| /** |
| * Check if any mobile Radios need to be shutdown. |
| * |
| * @return true is any mobile radio needs to be shutdown |
| */ |
| boolean needMobileRadioShutdown(); |
| |
| /** |
| * Shutdown Mobile Radios |
| */ |
| void shutdownMobileRadios(); |
| |
| /** |
| * Set phone radio type and access technology. |
| * |
| * @param rafs an RadioAccessFamily array to indicate all phone's |
| * new radio access family. The length of RadioAccessFamily |
| * must equ]]al to phone count. |
| */ |
| void setRadioCapability(in RadioAccessFamily[] rafs); |
| |
| /** |
| * Get phone radio type and access technology. |
| * |
| * @param phoneId which phone you want to get |
| * @param callingPackage the name of the package making the call |
| * @return phone radio type and access technology |
| */ |
| int getRadioAccessFamily(in int phoneId, String callingPackage); |
| |
| /** |
| * Enables or disables video calling. |
| * |
| * @param enable Whether to enable video calling. |
| */ |
| void enableVideoCalling(boolean enable); |
| |
| /** |
| * Whether video calling has been enabled by the user. |
| * |
| * @param callingPackage The package making the call. |
| * @return {@code true} if the user has enabled video calling, {@code false} otherwise. |
| */ |
| boolean isVideoCallingEnabled(String callingPackage); |
| |
| /** |
| * Whether the DTMF tone length can be changed. |
| * |
| * @return {@code true} if the DTMF tone length can be changed. |
| */ |
| boolean canChangeDtmfToneLength(); |
| |
| /** |
| * Whether the device is a world phone. |
| * |
| * @return {@code true} if the devices is a world phone. |
| */ |
| boolean isWorldPhone(); |
| |
| /** |
| * Whether the phone supports TTY mode. |
| * |
| * @return {@code true} if the device supports TTY mode. |
| */ |
| boolean isTtyModeSupported(); |
| |
| /** |
| * Whether the phone supports hearing aid compatibility. |
| * |
| * @return {@code true} if the device supports hearing aid compatibility. |
| */ |
| boolean isHearingAidCompatibilitySupported(); |
| |
| /** |
| * Get IMS Registration Status |
| */ |
| boolean isImsRegistered(); |
| |
| /** |
| * Returns the Status of Wi-Fi Calling |
| */ |
| boolean isWifiCallingAvailable(); |
| |
| /** |
| * Returns the Status of Volte |
| */ |
| boolean isVolteAvailable(); |
| |
| /** |
| * Returns the Status of VT (video telephony) |
| */ |
| boolean isVideoTelephonyAvailable(); |
| |
| /** |
| * Returns the unique device ID of phone, for example, the IMEI for |
| * GSM and the MEID for CDMA phones. Return null if device ID is not available. |
| * |
| * @param callingPackage The package making the call. |
| * <p>Requires Permission: |
| * {@link android.Manifest.permission#READ_PHONE_STATE READ_PHONE_STATE} |
| */ |
| String getDeviceId(String callingPackage); |
| |
| /** |
| * Returns the IMEI for the given slot. |
| * |
| * @param slotIndex - device slot. |
| * @param callingPackage The package making the call. |
| * <p>Requires Permission: |
| * {@link android.Manifest.permission#READ_PHONE_STATE READ_PHONE_STATE} |
| */ |
| String getImeiForSlot(int slotIndex, String callingPackage); |
| |
| /** |
| * Returns the MEID for the given slot. |
| * |
| * @param slotIndex - device slot. |
| * @param callingPackage The package making the call. |
| * <p>Requires Permission: |
| * {@link android.Manifest.permission#READ_PHONE_STATE READ_PHONE_STATE} |
| */ |
| String getMeidForSlot(int slotIndex, String callingPackage); |
| |
| /** |
| * Returns the device software version. |
| * |
| * @param slotIndex - device slot. |
| * @param callingPackage The package making the call. |
| * <p>Requires Permission: |
| * {@link android.Manifest.permission#READ_PHONE_STATE READ_PHONE_STATE} |
| */ |
| String getDeviceSoftwareVersionForSlot(int slotIndex, String callingPackage); |
| |
| /** |
| * Returns the subscription ID associated with the specified PhoneAccount. |
| */ |
| int getSubIdForPhoneAccount(in PhoneAccount phoneAccount); |
| |
| void factoryReset(int subId); |
| |
| /** |
| * An estimate of the users's current locale based on the default SIM. |
| * |
| * The returned string will be a well formed BCP-47 language tag, or {@code null} |
| * if no locale could be derived. |
| */ |
| String getLocaleFromDefaultSim(); |
| |
| /** |
| * Requests the modem activity info asynchronously. |
| * The implementor is expected to reply with the |
| * {@link android.telephony.ModemActivityInfo} object placed into the Bundle with the key |
| * {@link android.telephony.TelephonyManager#MODEM_ACTIVITY_RESULT_KEY}. |
| * The result code is ignored. |
| */ |
| oneway void requestModemActivityInfo(in ResultReceiver result); |
| |
| /** |
| * Get the service state on specified subscription |
| * @param subId Subscription id |
| * @param callingPackage The package making the call |
| * @return Service state on specified subscription. |
| */ |
| ServiceState getServiceStateForSubscriber(int subId, String callingPackage); |
| |
| /** |
| * Returns the URI for the per-account voicemail ringtone set in Phone settings. |
| * |
| * @param accountHandle The handle for the {@link PhoneAccount} for which to retrieve the |
| * voicemail ringtone. |
| * @return The URI for the ringtone to play when receiving a voicemail from a specific |
| * PhoneAccount. |
| */ |
| Uri getVoicemailRingtoneUri(in PhoneAccountHandle accountHandle); |
| |
| /** |
| * Sets the per-account voicemail ringtone. |
| * |
| * <p>Requires that the calling app is the default dialer, or has carrier privileges, or |
| * has permission {@link android.Manifest.permission#MODIFY_PHONE_STATE MODIFY_PHONE_STATE}. |
| * |
| * @param phoneAccountHandle The handle for the {@link PhoneAccount} for which to set the |
| * voicemail ringtone. |
| * @param uri The URI for the ringtone to play when receiving a voicemail from a specific |
| * PhoneAccount. |
| */ |
| void setVoicemailRingtoneUri(String callingPackage, |
| in PhoneAccountHandle phoneAccountHandle, in Uri uri); |
| |
| /** |
| * Returns whether vibration is set for voicemail notification in Phone settings. |
| * |
| * @param accountHandle The handle for the {@link PhoneAccount} for which to retrieve the |
| * voicemail vibration setting. |
| * @return {@code true} if the vibration is set for this PhoneAccount, {@code false} otherwise. |
| */ |
| boolean isVoicemailVibrationEnabled(in PhoneAccountHandle accountHandle); |
| |
| /** |
| * Sets the per-account preference whether vibration is enabled for voicemail notifications. |
| * |
| * <p>Requires that the calling app is the default dialer, or has carrier privileges, or |
| * has permission {@link android.Manifest.permission#MODIFY_PHONE_STATE MODIFY_PHONE_STATE}. |
| * |
| * @param phoneAccountHandle The handle for the {@link PhoneAccount} for which to set the |
| * voicemail vibration setting. |
| * @param enabled Whether to enable or disable vibration for voicemail notifications from a |
| * specific PhoneAccount. |
| */ |
| void setVoicemailVibrationEnabled(String callingPackage, |
| in PhoneAccountHandle phoneAccountHandle, boolean enabled); |
| |
| /** |
| * Returns a list of packages that have carrier privileges. |
| */ |
| List<String> getPackagesWithCarrierPrivileges(); |
| |
| /** |
| * Return the application ID for the app type. |
| * |
| * @param subId the subscription ID that this request applies to. |
| * @param appType the uicc app type, |
| * @return Application ID for specificied app type or null if no uicc or error. |
| */ |
| String getAidForAppType(int subId, int appType); |
| |
| /** |
| * Return the Electronic Serial Number. |
| * |
| * Requires that the calling app has READ_PRIVILEGED_PHONE_STATE permission |
| * |
| * @param subId the subscription ID that this request applies to. |
| * @return ESN or null if error. |
| * @hide |
| */ |
| String getEsn(int subId); |
| |
| /** |
| * Return the Preferred Roaming List Version |
| * |
| * Requires that the calling app has READ_PRIVILEGED_PHONE_STATE permission |
| * @param subId the subscription ID that this request applies to. |
| * @return PRLVersion or null if error. |
| * @hide |
| */ |
| String getCdmaPrlVersion(int subId); |
| |
| /** |
| * Get snapshot of Telephony histograms |
| * @return List of Telephony histograms |
| * Requires Permission: |
| * {@link android.Manifest.permission#MODIFY_PHONE_STATE MODIFY_PHONE_STATE} |
| * Or the calling app has carrier privileges. |
| */ |
| List<TelephonyHistogram> getTelephonyHistograms(); |
| |
| /** |
| * Set the allowed carrier list for slotIndex |
| * Require system privileges. In the future we may add this to carrier APIs. |
| * |
| * @return The number of carriers set successfully. Should match length of |
| * carriers on success. |
| */ |
| int setAllowedCarriers(int slotIndex, in List<CarrierIdentifier> carriers); |
| |
| /** |
| * Get the allowed carrier list for slotIndex. |
| * Require system privileges. In the future we may add this to carrier APIs. |
| * |
| * @return List of {@link android.service.carrier.CarrierIdentifier}; empty list |
| * means all carriers are allowed. |
| */ |
| List<CarrierIdentifier> getAllowedCarriers(int slotIndex); |
| |
| /** |
| * Action set from carrier signalling broadcast receivers to enable/disable metered apns |
| * Permissions android.Manifest.permission.MODIFY_PHONE_STATE is required |
| * @param subId the subscription ID that this action applies to. |
| * @param enabled control enable or disable metered apns. |
| * @hide |
| */ |
| void carrierActionSetMeteredApnsEnabled(int subId, boolean visible); |
| |
| /** |
| * Action set from carrier signalling broadcast receivers to enable/disable radio |
| * Permissions android.Manifest.permission.MODIFY_PHONE_STATE is required |
| * @param subId the subscription ID that this action applies to. |
| * @param enabled control enable or disable radio. |
| * @hide |
| */ |
| void carrierActionSetRadioEnabled(int subId, boolean enabled); |
| |
| /** |
| * Action set from carrier signalling broadcast receivers to start/stop reporting default |
| * network conditions. |
| * Permissions android.Manifest.permission.MODIFY_PHONE_STATE is required |
| * @param subId the subscription ID that this action applies to. |
| * @param report control start/stop reporting default network events. |
| * @hide |
| */ |
| void carrierActionReportDefaultNetworkStatus(int subId, boolean report); |
| |
| /** |
| * Get aggregated video call data usage since boot. |
| * Permissions android.Manifest.permission.READ_NETWORK_USAGE_HISTORY is required. |
| * |
| * @param perUidStats True if requesting data usage per uid, otherwise overall usage. |
| * @return Snapshot of video call data usage |
| * @hide |
| */ |
| NetworkStats getVtDataUsage(int subId, boolean perUidStats); |
| |
| /** |
| * Policy control of data connection. Usually used when data limit is passed. |
| * @param enabled True if enabling the data, otherwise disabling. |
| * @param subId Subscription index |
| * @hide |
| */ |
| void setPolicyDataEnabled(boolean enabled, int subId); |
| |
| /** |
| * Get Client request stats which will contain statistical information |
| * on each request made by client. |
| * @param callingPackage package making the call. |
| * @param subId Subscription index |
| * @hide |
| */ |
| List<ClientRequestStats> getClientRequestStats(String callingPackage, int subid); |
| |
| /** |
| * Set SIM card power state. |
| * @param slotIndex SIM slot id |
| * @param state State of SIM (power down, power up, pass through) |
| * @hide |
| * */ |
| void setSimPowerStateForSlot(int slotIndex, int state); |
| |
| /** |
| * Returns a list of Forbidden PLMNs from the specified SIM App |
| * Returns null if the query fails. |
| * |
| * |
| * <p>Requires that the calling app has READ_PRIVILEGED_PHONE_STATE or READ_PHONE_STATE |
| * |
| * @param subId subscription ID used for authentication |
| * @param appType the icc application type, like {@link #APPTYPE_USIM} |
| */ |
| String[] getForbiddenPlmns(int subId, int appType, String callingPackage); |
| |
| /** |
| * Check if phone is in emergency callback mode |
| * @return true if phone is in emergency callback mode |
| * @param subId the subscription ID that this action applies to. |
| * @hide |
| */ |
| boolean getEmergencyCallbackMode(int subId); |
| |
| /** |
| * Get the most recently available signal strength information. |
| * |
| * Get the most recent SignalStrength information reported by the modem. Due |
| * to power saving this information may not always be current. |
| * @param subId Subscription index |
| * @return the most recent cached signal strength info from the modem |
| * @hide |
| */ |
| SignalStrength getSignalStrength(int subId); |
| } |