page.title=Building a Work Policy Controller
page.metaDescription=Learn how to develop a Work Policy Controller to create and administer a managed profile on an employee's device.
@jd:body

<div id="tb-wrapper">
<div id="tb">

<h2>This lesson teaches you to</h2>
<ol>
 <li><a href="#after_creating_profile">Create a Managed Profile</a></li>
 <li><a href="#set_up_policies">Set Up Device Policies</a></li>
 <li><a href="#apply_restrictions">Apply App Restrictions</a></li>
</ol>

<!-- related docs (NOT javadocs) -->

<h2>
  You should also read
</h2>

<ul>
  <li>
    <a href="{@docRoot}guide/topics/admin/device-admin.html">Device
    Administration</a>
  </li>
</ul>

<h2>Resources</h2>
<ul>

  <li>
    <a href=
    "{@docRoot}samples/BasicManagedProfile/index.html">BasicManagedProfile</a>
  </li>

  <li>
    <a href=
    "{@docRoot}samples/AppRestrictionEnforcer/index.html">AppRestrictionEnforcer</a>
  </li>
</ul>

</div>
</div>


<p>
  In an Android for Work deployment, an enterprise needs to maintain control
  over certain aspects of the employees' devices. The enterprise needs to
  ensure that work-related information is encrypted and is kept separate from
  employees' personal data. The enterprise may also need to limit device
  capabilities, such as whether the device is allowed to use its camera. And
  the enterprise may require that approved apps provide app restrictions, so
  the enterprise can turn app capability on or off as needed.
</p>

<p>
  To handle these tasks, an enterprise develops and deploys a Work Policy
  Controller app. This app is installed on each employee's device. The
  controller app installed on each employee's device and creates a work user
  profile, which accesses enterprise apps and data separately from the user's
  personal account. The controller app also acts as the
  bridge between the enterprise's management software and the device; the
  enterprise tells the controller app when it needs to make configuration
  changes, and the controller app makes the appropriate settings changes for the
  device and for other apps.
</p>

<p>
  This lesson describes how to develop a Work Policy Controller app for devices
  in an Android for Work deployment. The lesson describes how to create a work
  user profile, how to set device policies, and how to apply
  restrictions to other apps running on the managed profile.
</p>

<p class="note">
  <strong>Note:</strong> This lesson does not cover the situation where the
  only profile on the device is the managed profile, under the enterprise's
  control.
</p>

<h2 id="overview">Device Administration Overview</h2>

<p>
  In an Android for Work deployment, the enterprise administrator can set
  policies to control the behavior of employees' devices and apps. The
  enterprise administrator sets these policies with software provided by their
  Enterprise Mobility Management (EMM) provider. The EMM software communicates
  with a Work Policy Controller on each device. The Work Policy Controller, in
  turn, manages the settings and behavior of the work user profile on each
  individual’s device.
</p>

<p class="note">
  <strong>Note:</strong> A Work Policy Controller is built on the existing
  model used for device administration applications, as described in <a href=
  "{@docRoot}guide/topics/admin/device-admin.html">Device Administration</a>.
  In particular, your app needs to create a subclass of {@link
  android.app.admin.DeviceAdminReceiver}, as described in that document.
</p>

<h3 id="managed_profiles">Managed profiles</h3>

<p>
  Users often want to use their personal devices in an enterprise setting. This
  situation can present enterprises with a dilemma. If the user can use their
  own device, the enterprise has to worry that confidential information (like
  employee emails and contacts) are on a device the enterprise does not
  control.
</p>

<p>
  To address this situation, Android 5.0 (API level 21) allows enterprises to
  set up a special work user profile using the Managed Profile API. This
  user profile is called a <em>managed profile</em>, or a <em>work profile</em>
  in the Android for Work program. If a device has a
  managed profile for work, the profile's settings are under the control of the
  enterprise administrator. The administrator can choose which apps are allowed
  for that profile, and can control just what device features are available to
  the profile.
</p>

<h2 id="create_profile">Create a Managed Profile</h2>

<p>To create a managed profile on a device that already has a personal profile,
first check that the device can support a managed profile, by seeing if the
device supports the {@link
android.content.pm.PackageManager#FEATURE_MANAGED_USERS FEATURE_MANAGED_USERS}
system feature:</p>

<pre>PackageManager pm = getPackageManager();
if (!pm.hasSystemFeature(PackageManager.FEATURE_MANAGED_USERS)) {

    // This device does not support native managed profiles!

}</pre>

<p>If the device supports managed profiles, create one by sending an intent with
an {@link android.app.admin.DevicePolicyManager#ACTION_PROVISION_MANAGED_PROFILE
ACTION_PROVISION_MANAGED_PROFILE} action. Include the device admin package
name as an extra.</p>

<pre>Activity provisioningActivity = getActivity();

// You'll need the package name for the WPC app.
String myWPCPackageName = "com.example.myWPCApp";

// Set up the provisioning intent
Intent provisioningIntent =
        new Intent("android.app.action.PROVISION_MANAGED_PROFILE");
intent.putExtra(myWPCPackageName,
        provisioningActivity.getApplicationContext().getPackageName());

if (provisioningIntent.resolveActivity(provisioningActivity.getPackageManager())
         == null) {

    // No handler for intent! Can't provision this device.
    // Show an error message and cancel.
} else {

    // REQUEST_PROVISION_MANAGED_PROFILE is defined
    // to be a suitable request code
    startActivityForResult(provisioningIntent,
            REQUEST_PROVISION_MANAGED_PROFILE);
    provisioningActivity.finish();
}</pre>

<p>The system responds to this intent by doing the following:</p>

<ul>
  <li>Verifies that the device is encrypted. If it is not, the system prompts
  the user to encrypt the device before proceeding.
  </li>

  <li>Creates a managed profile.
  </li>

  <li>Removes non-required applications from the managed profile.
  </li>

  <li>Copies the Work Policy Controller application into the managed profile and
    sets it as the profile owner.
  </li>
</ul>

<p>Override {@link android.app.Activity#onActivityResult onActivityResult()} to
see whether the provisioning was successful, as shown in the following 
example code:</p>

<pre>&#64;Override
public void onActivityResult(int requestCode, int resultCode, Intent data) {

    // Check if this is the result of the provisioning activity
    if (requestCode == REQUEST_PROVISION_MANAGED_PROFILE) {

        // If provisioning was successful, the result code is 
        // Activity.RESULT_OK
        if (resultCode == Activity.RESULT_OK) {
            // Hurray! Managed profile created and provisioned!
        } else {
            // Boo! Provisioning failed!
        }
        return;

    } else {
        // This is the result of some other activity, call the superclass
        super.onActivityResult(requestCode, resultCode, data);
    }
}</pre>

<h3 id="after_creating_profile">After Creating the Managed Profile</h3>

<p>When the profile has been provisioned, the system calls the Work Policy
Controller app's {@link
android.app.admin.DeviceAdminReceiver#onProfileProvisioningComplete
DeviceAdminReceiver.onProfileProvisioningComplete()} method. Override this
callback method to finish enabling the managed profile.</p>

<p>Typically, your {@link
android.app.admin.DeviceAdminReceiver#onProfileProvisioningComplete
DeviceAdminReceiver.onProfileProvisioningComplete()} callback implementation
would perform these tasks:</p>

<ul>
  <li>Verify that the device is complying with the EMM's device policies, as
  described in <a href="#set_up_policies">Set Up Device Policies</a>
  </li>

  <li>Enable any system applications that the administrator chooses to make
  available within the managed profile, using {@link
  android.app.admin.DevicePolicyManager#enableSystemApp
  DevicePolicyManager.enableSystemApp()}   </li>

  <li>If the device uses Google Play for Work, add the Google account
  to the managed profile with {@link android.accounts.AccountManager#addAccount
  AccountManager.addAccount()}, so administrators can install
  applications to the device
  </li>
</ul>

<p>Once you have completed these tasks, call the device policy manager's
{@link android.app.admin.DevicePolicyManager#setProfileEnabled
setProfileEnabled()} method to activate the managed profile:</p>


<pre>// Get the device policy manager
DevicePolicyManager myDevicePolicyMgr =
        (DevicePolicyManager) getSystemService(Context.DEVICE_POLICY_SERVICE);

ComponentName componentName = myDeviceAdminReceiver.getComponentName(this);

// Set the name for the newly created managed profile.
myDevicePolicyMgr.setProfileName(componentName, "My New Managed Profile");

// ...and enable the profile
manager.setProfileEnabled(componentName);</pre>

<h2 id="set_up_policies">Set Up Device Policies</h2>

<p>
  The Work Policy Controller app is responsible for applying the enterprise's
  device policies. For example, a particular enterprise might require that all
  devices become locked after a certain number of failed attempts to enter the
  device password. The controller app queries the EMM to find out what
  the current policies are, then uses the <a href=
  "{@docRoot}guide/topics/admin/device-admin.html">Device Administration</a>
  API to apply those policies.
</p>

<p>For information on how to apply device policies, see the 
<a href="{@docRoot}guide/topics/admin/device-admin.html#policies">Device
Administration</a> guide.</p>


<h2 id="apply_restrictions">Apply App Restrictions</h2>

<p>Enterprise environments may require that approved apps implement apps
implement security or feature restrictions. App developers must implement these
restrictions and declare them for use by enterprise administrators, as described
in <a href="{@docRoot}training/enterprise/app-restrictions.html">Implementing
App Restrictions</a>. The Work Policy Controller receives restriction changes
from the enterprise administrator, and forwards those restriction changes to the
apps.</p>

<p>For example, a particular news app might have a restriction setting that
controls whether the app is allowed to download videos over a cellular
network. When the EMM wants to disable cellular downloads, it sends a
notification to the controller app. The controller app, in turn,
notifies the news app that the restriction setting has changed.</p>

<p class="note"><strong>Note:</strong> This document covers how the Work Policy
Controller app changes the restriction settings for the other apps on the
managed profile. Details on how the Work Policy Controller app communicates with
the EMM are out of scope for this document.</p>

<p>To change an app's restrictions, call the {@link
android.app.admin.DevicePolicyManager#setApplicationRestrictions
DevicePolicyManager.setApplicationRestrictions()} method. This method is passed
three parameters: the controller app's {@link
android.app.admin.DeviceAdminReceiver}, the package name of the app whose
restrictions are being changed, and a {@link android.os.Bundle Bundle} that
contains the restrictions you want to set.</p>

<p>For example, suppose there's an app on the managed profile with the package
name <code>"com.example.newsfetcher"</code>. This app has a single boolean
restriction that can be configured, with the key
<code>"downloadByCellular"</code>. If this restriction is set to
<code>false</code>, the newsfetcher app is not allowed to download data through
a cellular network; it must use a Wi-Fi network instead.</p>

<p>
  If your Work Policy Controller app needs to turn off cellular downloads, it
  would first fetch the device policy service object, as described above. It
  then assembles a restrictions bundle and passes this bundle to {@link
  android.app.admin.DevicePolicyManager#setApplicationRestrictions
  setApplicationRestrictions()}:
</p>

<pre>// Fetch the DevicePolicyManager
DevicePolicyManager myDevicePolicyMgr =
        (DevicePolicyManager) thisActivity
                .getSystemService(Context.DEVICE_POLICY_SERVICE);

// Set up the restrictions bundle
bundle restrictionsBundle = new Bundle();
restrictionsBundle.putBoolean("downloadByCellular", false);

// Pass the restrictions to the policy manager. Assume the WPC app
// already has a DeviceAdminReceiver defined (myDeviceAdminReceiver).
myDevicePolicyMgr.setApplicationRestrictions(
        myDeviceAdminReceiver, "com.example.newsfetcher", restrictionsBundle);</pre>


<p class="note"><strong>Note:</strong> The device policy service conveys the restrictions
change to the app you name. However, it is up to that app to actually implement
the restriction. For example, in this case, the app would be responsible for
disabling its ability to use cellular networks for video downloads. Setting the
restriction does not cause the system to enforce this restriction on the app.
For more information, see <a href="{@docRoot}training/enterprise/app-
restrictions.html">Implementing App Restrictions</a>.</p>