/*
 * Copyright (C) 2016 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.view;

import android.annotation.IntDef;
import android.annotation.NonNull;
import android.annotation.Nullable;
import android.graphics.Bitmap;
import android.graphics.Rect;
import android.os.Handler;
import android.view.ViewTreeObserver.OnDrawListener;

import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;

/**
 * Provides a mechanisms to issue pixel copy requests to allow for copy
 * operations from {@link Surface} to {@link Bitmap}
 */
public final class PixelCopy {

    /** @hide */
    @Retention(RetentionPolicy.SOURCE)
    @IntDef({SUCCESS, ERROR_UNKNOWN, ERROR_TIMEOUT, ERROR_SOURCE_NO_DATA,
        ERROR_SOURCE_INVALID, ERROR_DESTINATION_INVALID})
    public @interface CopyResultStatus {}

    /** The pixel copy request succeeded */
    public static final int SUCCESS = 0;

    /** The pixel copy request failed with an unknown error. */
    public static final int ERROR_UNKNOWN = 1;

    /**
     * A timeout occurred while trying to acquire a buffer from the source to
     * copy from.
     */
    public static final int ERROR_TIMEOUT = 2;

    /**
     * The source has nothing to copy from. When the source is a {@link Surface}
     * this means that no buffers have been queued yet. Wait for the source
     * to produce a frame and try again.
     */
    public static final int ERROR_SOURCE_NO_DATA = 3;

    /**
     * It is not possible to copy from the source. This can happen if the source
     * is hardware-protected or destroyed.
     */
    public static final int ERROR_SOURCE_INVALID = 4;

    /**
     * The destination isn't a valid copy target. If the destination is a bitmap
     * this can occur if the bitmap is too large for the hardware to copy to.
     * It can also occur if the destination has been destroyed.
     */
    public static final int ERROR_DESTINATION_INVALID = 5;

    /**
     * Listener for observing the completion of a PixelCopy request.
     */
    public interface OnPixelCopyFinishedListener {
        /**
         * Callback for when a pixel copy request has completed. This will be called
         * regardless of whether the copy succeeded or failed.
         *
         * @param copyResult Contains the resulting status of the copy request.
         * This will either be {@link PixelCopy#SUCCESS} or one of the
         * <code>PixelCopy.ERROR_*</code> values.
         */
        void onPixelCopyFinished(@CopyResultStatus int copyResult);
    }

    /**
     * Requests for the display content of a {@link SurfaceView} to be copied
     * into a provided {@link Bitmap}.
     *
     * The contents of the source will be scaled to fit exactly inside the bitmap.
     * The pixel format of the source buffer will be converted, as part of the copy,
     * to fit the the bitmap's {@link Bitmap.Config}. The most recently queued buffer
     * in the SurfaceView's Surface will be used as the source of the copy.
     *
     * @param source The source from which to copy
     * @param dest The destination of the copy. The source will be scaled to
     * match the width, height, and format of this bitmap.
     * @param listener Callback for when the pixel copy request completes
     * @param listenerThread The callback will be invoked on this Handler when
     * the copy is finished.
     */
    public static void request(@NonNull SurfaceView source, @NonNull Bitmap dest,
            @NonNull OnPixelCopyFinishedListener listener, @NonNull Handler listenerThread) {
        request(source.getHolder().getSurface(), dest, listener, listenerThread);
    }

    /**
     * Requests for the display content of a {@link SurfaceView} to be copied
     * into a provided {@link Bitmap}.
     *
     * The contents of the source will be scaled to fit exactly inside the bitmap.
     * The pixel format of the source buffer will be converted, as part of the copy,
     * to fit the the bitmap's {@link Bitmap.Config}. The most recently queued buffer
     * in the SurfaceView's Surface will be used as the source of the copy.
     *
     * @param source The source from which to copy
     * @param srcRect The area of the source to copy from. If this is null
     * the copy area will be the entire surface. The rect will be clamped to
     * the bounds of the Surface.
     * @param dest The destination of the copy. The source will be scaled to
     * match the width, height, and format of this bitmap.
     * @param listener Callback for when the pixel copy request completes
     * @param listenerThread The callback will be invoked on this Handler when
     * the copy is finished.
     */
    public static void request(@NonNull SurfaceView source, @Nullable Rect srcRect,
            @NonNull Bitmap dest, @NonNull OnPixelCopyFinishedListener listener,
            @NonNull Handler listenerThread) {
        request(source.getHolder().getSurface(), srcRect,
                dest, listener, listenerThread);
    }

    /**
     * Requests a copy of the pixels from a {@link Surface} to be copied into
     * a provided {@link Bitmap}.
     *
     * The contents of the source will be scaled to fit exactly inside the bitmap.
     * The pixel format of the source buffer will be converted, as part of the copy,
     * to fit the the bitmap's {@link Bitmap.Config}. The most recently queued buffer
     * in the Surface will be used as the source of the copy.
     *
     * @param source The source from which to copy
     * @param dest The destination of the copy. The source will be scaled to
     * match the width, height, and format of this bitmap.
     * @param listener Callback for when the pixel copy request completes
     * @param listenerThread The callback will be invoked on this Handler when
     * the copy is finished.
     */
    public static void request(@NonNull Surface source, @NonNull Bitmap dest,
            @NonNull OnPixelCopyFinishedListener listener, @NonNull Handler listenerThread) {
        request(source, null, dest, listener, listenerThread);
    }

    /**
     * Requests a copy of the pixels at the provided {@link Rect} from
     * a {@link Surface} to be copied into a provided {@link Bitmap}.
     *
     * The contents of the source rect will be scaled to fit exactly inside the bitmap.
     * The pixel format of the source buffer will be converted, as part of the copy,
     * to fit the the bitmap's {@link Bitmap.Config}. The most recently queued buffer
     * in the Surface will be used as the source of the copy.
     *
     * @param source The source from which to copy
     * @param srcRect The area of the source to copy from. If this is null
     * the copy area will be the entire surface. The rect will be clamped to
     * the bounds of the Surface.
     * @param dest The destination of the copy. The source will be scaled to
     * match the width, height, and format of this bitmap.
     * @param listener Callback for when the pixel copy request completes
     * @param listenerThread The callback will be invoked on this Handler when
     * the copy is finished.
     */
    public static void request(@NonNull Surface source, @Nullable Rect srcRect,
            @NonNull Bitmap dest, @NonNull OnPixelCopyFinishedListener listener,
            @NonNull Handler listenerThread) {
        validateBitmapDest(dest);
        if (!source.isValid()) {
            throw new IllegalArgumentException("Surface isn't valid, source.isValid() == false");
        }
        if (srcRect != null && srcRect.isEmpty()) {
            throw new IllegalArgumentException("sourceRect is empty");
        }
        // TODO: Make this actually async and fast and cool and stuff
        int result = ThreadedRenderer.copySurfaceInto(source, srcRect, dest);
        listenerThread.post(new Runnable() {
            @Override
            public void run() {
                listener.onPixelCopyFinished(result);
            }
        });
    }

    /**
     * Requests a copy of the pixels from a {@link Window} to be copied into
     * a provided {@link Bitmap}.
     *
     * The contents of the source will be scaled to fit exactly inside the bitmap.
     * The pixel format of the source buffer will be converted, as part of the copy,
     * to fit the the bitmap's {@link Bitmap.Config}. The most recently queued buffer
     * in the Window's Surface will be used as the source of the copy.
     *
     * Note: This is limited to being able to copy from Window's with a non-null
     * DecorView. If {@link Window#peekDecorView()} is null this throws an
     * {@link IllegalArgumentException}. It will similarly throw an exception
     * if the DecorView has not yet acquired a backing surface. It is recommended
     * that {@link OnDrawListener} is used to ensure that at least one draw
     * has happened before trying to copy from the window, otherwise either
     * an {@link IllegalArgumentException} will be thrown or an error will
     * be returned to the {@link OnPixelCopyFinishedListener}.
     *
     * @param source The source from which to copy
     * @param dest The destination of the copy. The source will be scaled to
     * match the width, height, and format of this bitmap.
     * @param listener Callback for when the pixel copy request completes
     * @param listenerThread The callback will be invoked on this Handler when
     * the copy is finished.
     */
    public static void request(@NonNull Window source, @NonNull Bitmap dest,
            @NonNull OnPixelCopyFinishedListener listener, @NonNull Handler listenerThread) {
        request(source, null, dest, listener, listenerThread);
    }

    /**
     * Requests a copy of the pixels at the provided {@link Rect} from
     * a {@link Window} to be copied into a provided {@link Bitmap}.
     *
     * The contents of the source rect will be scaled to fit exactly inside the bitmap.
     * The pixel format of the source buffer will be converted, as part of the copy,
     * to fit the the bitmap's {@link Bitmap.Config}. The most recently queued buffer
     * in the Window's Surface will be used as the source of the copy.
     *
     * Note: This is limited to being able to copy from Window's with a non-null
     * DecorView. If {@link Window#peekDecorView()} is null this throws an
     * {@link IllegalArgumentException}. It will similarly throw an exception
     * if the DecorView has not yet acquired a backing surface. It is recommended
     * that {@link OnDrawListener} is used to ensure that at least one draw
     * has happened before trying to copy from the window, otherwise either
     * an {@link IllegalArgumentException} will be thrown or an error will
     * be returned to the {@link OnPixelCopyFinishedListener}.
     *
     * @param source The source from which to copy
     * @param srcRect The area of the source to copy from. If this is null
     * the copy area will be the entire surface. The rect will be clamped to
     * the bounds of the Surface.
     * @param dest The destination of the copy. The source will be scaled to
     * match the width, height, and format of this bitmap.
     * @param listener Callback for when the pixel copy request completes
     * @param listenerThread The callback will be invoked on this Handler when
     * the copy is finished.
     */
    public static void request(@NonNull Window source, @Nullable Rect srcRect,
            @NonNull Bitmap dest, @NonNull OnPixelCopyFinishedListener listener,
            @NonNull Handler listenerThread) {
        validateBitmapDest(dest);
        if (source == null) {
            throw new IllegalArgumentException("source is null");
        }
        if (source.peekDecorView() == null) {
            throw new IllegalArgumentException(
                    "Only able to copy windows with decor views");
        }
        Surface surface = null;
        if (source.peekDecorView().getViewRootImpl() != null) {
            surface = source.peekDecorView().getViewRootImpl().mSurface;
        }
        if (surface == null || !surface.isValid()) {
            throw new IllegalArgumentException(
                    "Window doesn't have a backing surface!");
        }
        request(surface, srcRect, dest, listener, listenerThread);
    }

    private static void validateBitmapDest(Bitmap bitmap) {
        // TODO: Pre-check max texture dimens if we can
        if (bitmap == null) {
            throw new IllegalArgumentException("Bitmap cannot be null");
        }
        if (bitmap.isRecycled()) {
            throw new IllegalArgumentException("Bitmap is recycled");
        }
        if (!bitmap.isMutable()) {
            throw new IllegalArgumentException("Bitmap is immutable");
        }
    }

    private PixelCopy() {}
}