| /* |
| * Copyright (C) 2007 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef ANDROID_AUDIO_TRACK_SHARED_H |
| #define ANDROID_AUDIO_TRACK_SHARED_H |
| |
| #include <stdint.h> |
| #include <sys/types.h> |
| |
| #include <audio_utils/minifloat.h> |
| #include <utils/threads.h> |
| #include <utils/Log.h> |
| #include <utils/RefBase.h> |
| #include <audio_utils/roundup.h> |
| #include <media/AudioResamplerPublic.h> |
| #include <media/AudioTimestamp.h> |
| #include <media/Modulo.h> |
| #include <media/nbaio/SingleStateQueue.h> |
| |
| namespace android { |
| |
| // ---------------------------------------------------------------------------- |
| |
| // for audio_track_cblk_t::mFlags |
| #define CBLK_UNDERRUN 0x01 // set by server immediately on output underrun, cleared by client |
| #define CBLK_FORCEREADY 0x02 // set: track is considered ready immediately by AudioFlinger, |
| // clear: track is ready when buffer full |
| #define CBLK_INVALID 0x04 // track buffer invalidated by AudioFlinger, need to re-create |
| #define CBLK_DISABLED 0x08 // output track disabled by AudioFlinger due to underrun, |
| // need to re-start. Unlike CBLK_UNDERRUN, this is not set |
| // immediately, but only after a long string of underruns. |
| // 0x10 unused |
| #define CBLK_LOOP_CYCLE 0x20 // set by server each time a loop cycle other than final one completes |
| #define CBLK_LOOP_FINAL 0x40 // set by server when the final loop cycle completes |
| #define CBLK_BUFFER_END 0x80 // set by server when the position reaches end of buffer if not looping |
| #define CBLK_OVERRUN 0x100 // set by server immediately on input overrun, cleared by client |
| #define CBLK_INTERRUPT 0x200 // set by client on interrupt(), cleared by client in obtainBuffer() |
| #define CBLK_STREAM_END_DONE 0x400 // set by server on render completion, cleared by client |
| |
| //EL_FIXME 20 seconds may not be enough and must be reconciled with new obtainBuffer implementation |
| #define MAX_RUN_OFFLOADED_TIMEOUT_MS 20000 // assuming up to a maximum of 20 seconds of offloaded |
| |
| struct AudioTrackSharedStreaming { |
| // similar to NBAIO MonoPipe |
| // in continuously incrementing frame units, take modulo buffer size, which must be a power of 2 |
| volatile int32_t mFront; // read by consumer (output: server, input: client) |
| volatile int32_t mRear; // written by producer (output: client, input: server) |
| volatile int32_t mFlush; // incremented by client to indicate a request to flush; |
| // server notices and discards all data between mFront and mRear |
| volatile int32_t mStop; // set by client to indicate a stop frame position; server |
| // will not read beyond this position until start is called. |
| volatile uint32_t mUnderrunFrames; // server increments for each unavailable but desired frame |
| volatile uint32_t mUnderrunCount; // server increments for each underrun occurrence |
| }; |
| |
| // Represents a single state of an AudioTrack that was created in static mode (shared memory buffer |
| // supplied by the client). This state needs to be communicated from the client to server. As this |
| // state is too large to be updated atomically without a mutex, and mutexes aren't allowed here, the |
| // state is wrapped by a SingleStateQueue. |
| struct StaticAudioTrackState { |
| // Do not define constructors, destructors, or virtual methods as this is part of a |
| // union in shared memory and they will not get called properly. |
| |
| // These fields should both be size_t, but since they are located in shared memory we |
| // force to 32-bit. The client and server may have different typedefs for size_t. |
| |
| // The state has a sequence counter to indicate whether changes are made to loop or position. |
| // The sequence counter also currently indicates whether loop or position is first depending |
| // on which is greater; it jumps by max(mLoopSequence, mPositionSequence) + 1. |
| |
| uint32_t mLoopStart; |
| uint32_t mLoopEnd; |
| int32_t mLoopCount; |
| uint32_t mLoopSequence; // a sequence counter to indicate changes to loop |
| uint32_t mPosition; |
| uint32_t mPositionSequence; // a sequence counter to indicate changes to position |
| }; |
| |
| typedef SingleStateQueue<StaticAudioTrackState> StaticAudioTrackSingleStateQueue; |
| |
| struct StaticAudioTrackPosLoop { |
| // Do not define constructors, destructors, or virtual methods as this is part of a |
| // union in shared memory and will not get called properly. |
| |
| // These fields should both be size_t, but since they are located in shared memory we |
| // force to 32-bit. The client and server may have different typedefs for size_t. |
| |
| // This struct information is stored in a single state queue to communicate the |
| // static AudioTrack server state to the client while data is consumed. |
| // It is smaller than StaticAudioTrackState to prevent unnecessary information from |
| // being sent. |
| |
| uint32_t mBufferPosition; |
| int32_t mLoopCount; |
| }; |
| |
| typedef SingleStateQueue<StaticAudioTrackPosLoop> StaticAudioTrackPosLoopQueue; |
| |
| struct AudioTrackSharedStatic { |
| // client requests to the server for loop or position changes. |
| StaticAudioTrackSingleStateQueue::Shared |
| mSingleStateQueue; |
| // position info updated asynchronously by server and read by client, |
| // "for entertainment purposes only" |
| StaticAudioTrackPosLoopQueue::Shared |
| mPosLoopQueue; |
| }; |
| |
| typedef SingleStateQueue<AudioPlaybackRate> PlaybackRateQueue; |
| |
| typedef SingleStateQueue<ExtendedTimestamp> ExtendedTimestampQueue; |
| |
| // ---------------------------------------------------------------------------- |
| |
| // Important: do not add any virtual methods, including ~ |
| struct audio_track_cblk_t |
| { |
| // Since the control block is always located in shared memory, this constructor |
| // is only used for placement new(). It is never used for regular new() or stack. |
| audio_track_cblk_t(); |
| /*virtual*/ ~audio_track_cblk_t() { } |
| |
| friend class Proxy; |
| friend class ClientProxy; |
| friend class AudioTrackClientProxy; |
| friend class AudioRecordClientProxy; |
| friend class ServerProxy; |
| friend class AudioTrackServerProxy; |
| friend class AudioRecordServerProxy; |
| |
| // The data members are grouped so that members accessed frequently and in the same context |
| // are in the same line of data cache. |
| |
| uint32_t mServer; // Number of filled frames consumed by server (mIsOut), |
| // or filled frames provided by server (!mIsOut). |
| // It is updated asynchronously by server without a barrier. |
| // The value should be used |
| // "for entertainment purposes only", |
| // which means don't make important decisions based on it. |
| |
| uint32_t mPad1; // unused |
| |
| volatile int32_t mFutex; // event flag: down (P) by client, |
| // up (V) by server or binderDied() or interrupt() |
| #define CBLK_FUTEX_WAKE 1 // if event flag bit is set, then a deferred wake is pending |
| |
| private: |
| |
| // This field should be a size_t, but since it is located in shared memory we |
| // force to 32-bit. The client and server may have different typedefs for size_t. |
| uint32_t mMinimum; // server wakes up client if available >= mMinimum |
| |
| // Stereo gains for AudioTrack only, not used by AudioRecord. |
| gain_minifloat_packed_t mVolumeLR; |
| |
| uint32_t mSampleRate; // AudioTrack only: client's requested sample rate in Hz |
| // or 0 == default. Write-only client, read-only server. |
| |
| PlaybackRateQueue::Shared mPlaybackRateQueue; |
| |
| // client write-only, server read-only |
| uint16_t mSendLevel; // Fixed point U4.12 so 0x1000 means 1.0 |
| |
| uint16_t mPad2 __attribute__((__unused__)); // unused |
| |
| // server write-only, client read |
| ExtendedTimestampQueue::Shared mExtendedTimestampQueue; |
| |
| // This is set by AudioTrack.setBufferSizeInFrames(). |
| // A write will not fill the buffer above this limit. |
| volatile uint32_t mBufferSizeInFrames; // effective size of the buffer |
| |
| public: |
| |
| volatile int32_t mFlags; // combinations of CBLK_* |
| |
| public: |
| union { |
| AudioTrackSharedStreaming mStreaming; |
| AudioTrackSharedStatic mStatic; |
| int mAlign[8]; |
| } u; |
| |
| // Cache line boundary (32 bytes) |
| }; |
| |
| // ---------------------------------------------------------------------------- |
| |
| // Proxy for shared memory control block, to isolate callers from needing to know the details. |
| // There is exactly one ClientProxy and one ServerProxy per shared memory control block. |
| // The proxies are located in normal memory, and are not multi-thread safe within a given side. |
| class Proxy : public RefBase { |
| protected: |
| Proxy(audio_track_cblk_t* cblk, void *buffers, size_t frameCount, size_t frameSize, bool isOut, |
| bool clientInServer); |
| virtual ~Proxy() { } |
| |
| public: |
| struct Buffer { |
| size_t mFrameCount; // number of frames available in this buffer |
| void* mRaw; // pointer to first frame |
| size_t mNonContig; // number of additional non-contiguous frames available |
| }; |
| |
| size_t frameCount() const { return mFrameCount; } |
| |
| protected: |
| // These refer to shared memory, and are virtual addresses with respect to the current process. |
| // They may have different virtual addresses within the other process. |
| audio_track_cblk_t* const mCblk; // the control block |
| void* const mBuffers; // starting address of buffers |
| |
| const size_t mFrameCount; // not necessarily a power of 2 |
| const size_t mFrameSize; // in bytes |
| const size_t mFrameCountP2; // mFrameCount rounded to power of 2, streaming mode |
| const bool mIsOut; // true for AudioTrack, false for AudioRecord |
| const bool mClientInServer; // true for OutputTrack, false for AudioTrack & AudioRecord |
| bool mIsShutdown; // latch set to true when shared memory corruption detected |
| size_t mUnreleased; // unreleased frames remaining from most recent obtainBuffer |
| }; |
| |
| // ---------------------------------------------------------------------------- |
| |
| // Proxy seen by AudioTrack client and AudioRecord client |
| class ClientProxy : public Proxy { |
| public: |
| ClientProxy(audio_track_cblk_t* cblk, void *buffers, size_t frameCount, size_t frameSize, |
| bool isOut, bool clientInServer); |
| virtual ~ClientProxy() { } |
| |
| static const struct timespec kForever; |
| static const struct timespec kNonBlocking; |
| |
| // Obtain a buffer with filled frames (reading) or empty frames (writing). |
| // It is permitted to call obtainBuffer() multiple times in succession, without any intervening |
| // calls to releaseBuffer(). In that case, the final obtainBuffer() is the one that effectively |
| // sets or extends the unreleased frame count. |
| // On entry: |
| // buffer->mFrameCount should be initialized to maximum number of desired frames, |
| // which must be > 0. |
| // buffer->mNonContig is unused. |
| // buffer->mRaw is unused. |
| // requested is the requested timeout in local monotonic delta time units: |
| // NULL or &kNonBlocking means non-blocking (zero timeout). |
| // &kForever means block forever (infinite timeout). |
| // Other values mean a specific timeout in local monotonic delta time units. |
| // elapsed is a pointer to a location that will hold the total local monotonic time that |
| // elapsed while blocked, or NULL if not needed. |
| // On exit: |
| // buffer->mFrameCount has the actual number of contiguous available frames, |
| // which is always 0 when the return status != NO_ERROR. |
| // buffer->mNonContig is the number of additional non-contiguous available frames. |
| // buffer->mRaw is a pointer to the first available frame, |
| // or NULL when buffer->mFrameCount == 0. |
| // The return status is one of: |
| // NO_ERROR Success, buffer->mFrameCount > 0. |
| // WOULD_BLOCK Non-blocking mode and no frames are available. |
| // TIMED_OUT Timeout occurred before any frames became available. |
| // This can happen even for infinite timeout, due to a spurious wakeup. |
| // In this case, the caller should investigate and then re-try as appropriate. |
| // DEAD_OBJECT Server has died or invalidated, caller should destroy this proxy and re-create. |
| // -EINTR Call has been interrupted. Look around to see why, and then perhaps try again. |
| // NO_INIT Shared memory is corrupt. |
| // NOT_ENOUGH_DATA Server has disabled the track because of underrun: restart the track |
| // if still in active state. |
| // Assertion failure on entry, if buffer == NULL or buffer->mFrameCount == 0. |
| status_t obtainBuffer(Buffer* buffer, const struct timespec *requested = NULL, |
| struct timespec *elapsed = NULL); |
| |
| // Release (some of) the frames last obtained. |
| // On entry, buffer->mFrameCount should have the number of frames to release, |
| // which must (cumulatively) be <= the number of frames last obtained but not yet released. |
| // buffer->mRaw is ignored, but is normally same pointer returned by last obtainBuffer(). |
| // It is permitted to call releaseBuffer() multiple times to release the frames in chunks. |
| // On exit: |
| // buffer->mFrameCount is zero. |
| // buffer->mRaw is NULL. |
| void releaseBuffer(Buffer* buffer); |
| |
| // Call after detecting server's death |
| void binderDied(); |
| |
| // Call to force an obtainBuffer() to return quickly with -EINTR |
| void interrupt(); |
| |
| Modulo<uint32_t> getPosition() { |
| return mEpoch + mCblk->mServer; |
| } |
| |
| void setEpoch(const Modulo<uint32_t> &epoch) { |
| mEpoch = epoch; |
| } |
| |
| void setMinimum(size_t minimum) { |
| // This can only happen on a 64-bit client |
| if (minimum > UINT32_MAX) { |
| minimum = UINT32_MAX; |
| } |
| mCblk->mMinimum = (uint32_t) minimum; |
| } |
| |
| // Return the number of frames that would need to be obtained and released |
| // in order for the client to be aligned at start of buffer |
| virtual size_t getMisalignment(); |
| |
| Modulo<uint32_t> getEpoch() const { |
| return mEpoch; |
| } |
| |
| uint32_t getBufferSizeInFrames() const { return mBufferSizeInFrames; } |
| // See documentation for AudioTrack::setBufferSizeInFrames() |
| uint32_t setBufferSizeInFrames(uint32_t requestedSize); |
| |
| status_t getTimestamp(ExtendedTimestamp *timestamp) { |
| if (timestamp == nullptr) { |
| return BAD_VALUE; |
| } |
| (void) mTimestampObserver.poll(mTimestamp); |
| *timestamp = mTimestamp; |
| return OK; |
| } |
| |
| void clearTimestamp() { |
| mTimestamp.clear(); |
| } |
| |
| virtual void stop() { }; // called by client in AudioTrack::stop() |
| |
| private: |
| // This is a copy of mCblk->mBufferSizeInFrames |
| uint32_t mBufferSizeInFrames; // effective size of the buffer |
| |
| Modulo<uint32_t> mEpoch; |
| |
| // The shared buffer contents referred to by the timestamp observer |
| // is initialized when the server proxy created. A local zero timestamp |
| // is initialized by the client constructor. |
| ExtendedTimestampQueue::Observer mTimestampObserver; |
| ExtendedTimestamp mTimestamp; // initialized by constructor |
| }; |
| |
| // ---------------------------------------------------------------------------- |
| |
| // Proxy used by AudioTrack client, which also includes AudioFlinger::PlaybackThread::OutputTrack |
| class AudioTrackClientProxy : public ClientProxy { |
| public: |
| AudioTrackClientProxy(audio_track_cblk_t* cblk, void *buffers, size_t frameCount, |
| size_t frameSize, bool clientInServer = false) |
| : ClientProxy(cblk, buffers, frameCount, frameSize, true /*isOut*/, |
| clientInServer), |
| mPlaybackRateMutator(&cblk->mPlaybackRateQueue) { |
| } |
| |
| virtual ~AudioTrackClientProxy() { } |
| |
| // No barriers on the following operations, so the ordering of loads/stores |
| // with respect to other parameters is UNPREDICTABLE. That's considered safe. |
| |
| // caller must limit to 0.0 <= sendLevel <= 1.0 |
| void setSendLevel(float sendLevel) { |
| mCblk->mSendLevel = uint16_t(sendLevel * 0x1000); |
| } |
| |
| // set stereo gains |
| void setVolumeLR(gain_minifloat_packed_t volumeLR) { |
| mCblk->mVolumeLR = volumeLR; |
| } |
| |
| void setSampleRate(uint32_t sampleRate) { |
| mCblk->mSampleRate = sampleRate; |
| } |
| |
| void setPlaybackRate(const AudioPlaybackRate& playbackRate) { |
| mPlaybackRateMutator.push(playbackRate); |
| } |
| |
| // Sends flush and stop position information from the client to the server, |
| // used by streaming AudioTrack flush() or stop(). |
| void sendStreamingFlushStop(bool flush); |
| |
| virtual void flush(); |
| |
| void stop() override; |
| |
| virtual uint32_t getUnderrunFrames() const { |
| return mCblk->u.mStreaming.mUnderrunFrames; |
| } |
| virtual uint32_t getUnderrunCount() const { |
| return mCblk->u.mStreaming.mUnderrunCount; |
| } |
| |
| bool clearStreamEndDone(); // and return previous value |
| |
| bool getStreamEndDone() const; |
| |
| status_t waitStreamEndDone(const struct timespec *requested); |
| |
| private: |
| PlaybackRateQueue::Mutator mPlaybackRateMutator; |
| }; |
| |
| class StaticAudioTrackClientProxy : public AudioTrackClientProxy { |
| public: |
| StaticAudioTrackClientProxy(audio_track_cblk_t* cblk, void *buffers, size_t frameCount, |
| size_t frameSize); |
| virtual ~StaticAudioTrackClientProxy() { } |
| |
| virtual void flush(); |
| |
| void stop() override; |
| |
| #define MIN_LOOP 16 // minimum length of each loop iteration in frames |
| |
| // setLoop(), setBufferPosition(), and setBufferPositionAndLoop() set the |
| // static buffer position and looping parameters. These commands are not |
| // synchronous (they do not wait or block); instead they take effect at the |
| // next buffer data read from the server side. However, the client side |
| // getters will read a cached version of the position and loop variables |
| // until the setting takes effect. |
| // |
| // setBufferPositionAndLoop() is equivalent to calling, in order, setLoop() and |
| // setBufferPosition(). |
| // |
| // The functions should not be relied upon to do parameter or state checking. |
| // That is done at the AudioTrack level. |
| |
| void setLoop(size_t loopStart, size_t loopEnd, int loopCount); |
| void setBufferPosition(size_t position); |
| void setBufferPositionAndLoop(size_t position, size_t loopStart, size_t loopEnd, |
| int loopCount); |
| size_t getBufferPosition(); |
| // getBufferPositionAndLoopCount() provides the proper snapshot of |
| // position and loopCount together. |
| void getBufferPositionAndLoopCount(size_t *position, int *loopCount); |
| |
| virtual size_t getMisalignment() { |
| return 0; |
| } |
| |
| virtual uint32_t getUnderrunFrames() const override { |
| return 0; |
| } |
| |
| virtual uint32_t getUnderrunCount() const override { |
| return 0; |
| } |
| |
| private: |
| StaticAudioTrackSingleStateQueue::Mutator mMutator; |
| StaticAudioTrackPosLoopQueue::Observer mPosLoopObserver; |
| StaticAudioTrackState mState; // last communicated state to server |
| StaticAudioTrackPosLoop mPosLoop; // snapshot of position and loop. |
| }; |
| |
| // ---------------------------------------------------------------------------- |
| |
| // Proxy used by AudioRecord client |
| class AudioRecordClientProxy : public ClientProxy { |
| public: |
| AudioRecordClientProxy(audio_track_cblk_t* cblk, void *buffers, size_t frameCount, |
| size_t frameSize) |
| : ClientProxy(cblk, buffers, frameCount, frameSize, |
| false /*isOut*/, false /*clientInServer*/) { } |
| ~AudioRecordClientProxy() { } |
| |
| // Advances the client read pointer to the server write head pointer |
| // effectively flushing the client read buffer. The effect is |
| // instantaneous. Returns the number of frames flushed. |
| uint32_t flush() { |
| int32_t rear = android_atomic_acquire_load(&mCblk->u.mStreaming.mRear); |
| int32_t front = mCblk->u.mStreaming.mFront; |
| android_atomic_release_store(rear, &mCblk->u.mStreaming.mFront); |
| return (Modulo<int32_t>(rear) - front).unsignedValue(); |
| } |
| }; |
| |
| // ---------------------------------------------------------------------------- |
| |
| // Proxy used by AudioFlinger server |
| class ServerProxy : public Proxy { |
| protected: |
| ServerProxy(audio_track_cblk_t* cblk, void *buffers, size_t frameCount, size_t frameSize, |
| bool isOut, bool clientInServer); |
| public: |
| virtual ~ServerProxy() { } |
| |
| // Obtain a buffer with filled frames (writing) or empty frames (reading). |
| // It is permitted to call obtainBuffer() multiple times in succession, without any intervening |
| // calls to releaseBuffer(). In that case, the final obtainBuffer() is the one that effectively |
| // sets or extends the unreleased frame count. |
| // Always non-blocking. |
| // On entry: |
| // buffer->mFrameCount should be initialized to maximum number of desired frames, |
| // which must be > 0. |
| // buffer->mNonContig is unused. |
| // buffer->mRaw is unused. |
| // ackFlush is true iff being called from Track::start to acknowledge a pending flush. |
| // On exit: |
| // buffer->mFrameCount has the actual number of contiguous available frames, |
| // which is always 0 when the return status != NO_ERROR. |
| // buffer->mNonContig is the number of additional non-contiguous available frames. |
| // buffer->mRaw is a pointer to the first available frame, |
| // or NULL when buffer->mFrameCount == 0. |
| // The return status is one of: |
| // NO_ERROR Success, buffer->mFrameCount > 0. |
| // WOULD_BLOCK No frames are available. |
| // NO_INIT Shared memory is corrupt. |
| virtual status_t obtainBuffer(Buffer* buffer, bool ackFlush = false); |
| |
| // Release (some of) the frames last obtained. |
| // On entry, buffer->mFrameCount should have the number of frames to release, |
| // which must (cumulatively) be <= the number of frames last obtained but not yet released. |
| // It is permitted to call releaseBuffer() multiple times to release the frames in chunks. |
| // buffer->mRaw is ignored, but is normally same pointer returned by last obtainBuffer(). |
| // On exit: |
| // buffer->mFrameCount is zero. |
| // buffer->mRaw is NULL. |
| virtual void releaseBuffer(Buffer* buffer); |
| |
| // Return the total number of frames that AudioFlinger has obtained and released |
| virtual int64_t framesReleased() const { return mReleased; } |
| |
| // Expose timestamp to client proxy. Should only be called by a single thread. |
| virtual void setTimestamp(const ExtendedTimestamp ×tamp) { |
| mTimestampMutator.push(timestamp); |
| } |
| |
| virtual ExtendedTimestamp getTimestamp() const { |
| return mTimestampMutator.last(); |
| } |
| |
| // Flushes the shared ring buffer if the client had requested it using mStreaming.mFlush. |
| // If flush occurs then: |
| // cblk->u.mStreaming.mFront, ServerProxy::mFlush and ServerProxy::mFlushed will be modified |
| // client will be notified via Futex |
| virtual void flushBufferIfNeeded(); |
| |
| // Returns the rear position of the AudioTrack shared ring buffer, limited by |
| // the stop frame position level. |
| virtual int32_t getRear() const = 0; |
| |
| // Total count of the number of flushed frames since creation (never reset). |
| virtual int64_t framesFlushed() const { return mFlushed; } |
| |
| // Safe frames ready query with no side effects. |
| virtual size_t framesReadySafe() const = 0; |
| |
| // Get dynamic buffer size from the shared control block. |
| uint32_t getBufferSizeInFrames() const { |
| return android_atomic_acquire_load((int32_t *)&mCblk->mBufferSizeInFrames); |
| } |
| |
| protected: |
| size_t mAvailToClient; // estimated frames available to client prior to releaseBuffer() |
| int32_t mFlush; // our copy of cblk->u.mStreaming.mFlush, for streaming output only |
| int64_t mReleased; // our copy of cblk->mServer, at 64 bit resolution |
| int64_t mFlushed; // flushed frames to account for client-server discrepancy |
| ExtendedTimestampQueue::Mutator mTimestampMutator; |
| }; |
| |
| // Proxy used by AudioFlinger for servicing AudioTrack |
| class AudioTrackServerProxy : public ServerProxy { |
| public: |
| AudioTrackServerProxy(audio_track_cblk_t* cblk, void *buffers, size_t frameCount, |
| size_t frameSize, bool clientInServer, uint32_t sampleRate) |
| : ServerProxy(cblk, buffers, frameCount, frameSize, true /*isOut*/, clientInServer), |
| mPlaybackRateObserver(&cblk->mPlaybackRateQueue), |
| mUnderrunCount(0), mUnderrunning(false), mDrained(true) { |
| mCblk->mSampleRate = sampleRate; |
| mPlaybackRate = AUDIO_PLAYBACK_RATE_DEFAULT; |
| } |
| protected: |
| virtual ~AudioTrackServerProxy() { } |
| |
| public: |
| // return value of these methods must be validated by the caller |
| uint32_t getSampleRate() const { return mCblk->mSampleRate; } |
| uint16_t getSendLevel_U4_12() const { return mCblk->mSendLevel; } |
| gain_minifloat_packed_t getVolumeLR() const { return mCblk->mVolumeLR; } |
| |
| // estimated total number of filled frames available to server to read, |
| // which may include non-contiguous frames |
| virtual size_t framesReady(); |
| |
| size_t framesReadySafe() const override; // frames available to read by server. |
| |
| // Currently AudioFlinger will call framesReady() for a fast track from two threads: |
| // FastMixer thread, and normal mixer thread. This is dangerous, as the proxy is intended |
| // to be called from at most one thread of server, and one thread of client. |
| // As a temporary workaround, this method informs the proxy implementation that it |
| // should avoid doing a state queue poll from within framesReady(). |
| // FIXME Change AudioFlinger to not call framesReady() from normal mixer thread. |
| virtual void framesReadyIsCalledByMultipleThreads() { } |
| |
| bool setStreamEndDone(); // and return previous value |
| |
| // Add to the tally of underrun frames, and inform client of underrun |
| virtual void tallyUnderrunFrames(uint32_t frameCount); |
| |
| // Return the total number of frames which AudioFlinger desired but were unavailable, |
| // and thus which resulted in an underrun. |
| virtual uint32_t getUnderrunFrames() const { return mCblk->u.mStreaming.mUnderrunFrames; } |
| |
| virtual uint32_t getUnderrunCount() const { return mCblk->u.mStreaming.mUnderrunCount; } |
| |
| // Return the playback speed and pitch read atomically. Not multi-thread safe on server side. |
| AudioPlaybackRate getPlaybackRate(); |
| |
| // Set the internal drain state of the track buffer from the timestamp received. |
| virtual void setDrained(bool drained) { |
| mDrained.store(drained); |
| } |
| |
| // Check if the internal drain state of the track buffer. |
| // This is not a guarantee, but advisory for determining whether the track is |
| // fully played out. |
| virtual bool isDrained() const { |
| return mDrained.load(); |
| } |
| |
| int32_t getRear() const override; |
| |
| // Called on server side track start(). |
| virtual void start(); |
| |
| private: |
| AudioPlaybackRate mPlaybackRate; // last observed playback rate |
| PlaybackRateQueue::Observer mPlaybackRateObserver; |
| |
| // Last client stop-at position when start() was called. Used for streaming AudioTracks. |
| std::atomic<int32_t> mStopLast{0}; |
| |
| // The server keeps a copy here where it is safe from the client. |
| uint32_t mUnderrunCount; // echoed to mCblk |
| bool mUnderrunning; // used to detect edge of underrun |
| |
| std::atomic<bool> mDrained; // is the track buffer drained |
| }; |
| |
| class StaticAudioTrackServerProxy : public AudioTrackServerProxy { |
| public: |
| StaticAudioTrackServerProxy(audio_track_cblk_t* cblk, void *buffers, size_t frameCount, |
| size_t frameSize, uint32_t sampleRate); |
| protected: |
| virtual ~StaticAudioTrackServerProxy() { } |
| |
| public: |
| virtual size_t framesReady(); |
| virtual size_t framesReadySafe() const override; |
| virtual void framesReadyIsCalledByMultipleThreads(); |
| virtual status_t obtainBuffer(Buffer* buffer, bool ackFlush); |
| virtual void releaseBuffer(Buffer* buffer); |
| virtual void tallyUnderrunFrames(uint32_t frameCount); |
| virtual uint32_t getUnderrunFrames() const { return 0; } |
| |
| int32_t getRear() const override; |
| |
| void start() override { } // ignore for static tracks |
| |
| private: |
| status_t updateStateWithLoop(StaticAudioTrackState *localState, |
| const StaticAudioTrackState &update) const; |
| status_t updateStateWithPosition(StaticAudioTrackState *localState, |
| const StaticAudioTrackState &update) const; |
| ssize_t pollPosition(); // poll for state queue update, and return current position |
| StaticAudioTrackSingleStateQueue::Observer mObserver; |
| StaticAudioTrackPosLoopQueue::Mutator mPosLoopMutator; |
| size_t mFramesReadySafe; // Assuming size_t read/writes are atomic on 32 / 64 bit |
| // processors, this is a thread-safe version of |
| // mFramesReady. |
| int64_t mFramesReady; // The number of frames ready in the static buffer |
| // including loops. This is 64 bits since loop mode |
| // can cause a track to appear to have a large number |
| // of frames. INT64_MAX means an infinite loop. |
| bool mFramesReadyIsCalledByMultipleThreads; |
| StaticAudioTrackState mState; // Server side state. Any updates from client must be |
| // passed by the mObserver SingleStateQueue. |
| }; |
| |
| // Proxy used by AudioFlinger for servicing AudioRecord |
| class AudioRecordServerProxy : public ServerProxy { |
| public: |
| AudioRecordServerProxy(audio_track_cblk_t* cblk, void *buffers, size_t frameCount, |
| size_t frameSize, bool clientInServer) |
| : ServerProxy(cblk, buffers, frameCount, frameSize, false /*isOut*/, clientInServer) { } |
| |
| int32_t getRear() const override { |
| return mCblk->u.mStreaming.mRear; // For completeness only; mRear written by server. |
| } |
| |
| size_t framesReadySafe() const override; // frames available to read by client. |
| |
| protected: |
| virtual ~AudioRecordServerProxy() { } |
| }; |
| |
| // ---------------------------------------------------------------------------- |
| |
| }; // namespace android |
| |
| #endif // ANDROID_AUDIO_TRACK_SHARED_H |