blob: c7136dff4e86bb1c1360f28515f3a6da5c62274b [file] [log] [blame]
/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ANDROID_HARDWARE_STREAM_HAL_LOCAL_H
#define ANDROID_HARDWARE_STREAM_HAL_LOCAL_H
#include <media/audiohal/StreamHalInterface.h>
#include "StreamPowerLog.h"
namespace android {
class DeviceHalLocal;
class StreamHalLocal : public virtual StreamHalInterface
{
public:
// Return the sampling rate in Hz - eg. 44100.
virtual status_t getSampleRate(uint32_t *rate);
// Return size of input/output buffer in bytes for this stream - eg. 4800.
virtual status_t getBufferSize(size_t *size);
// Return the channel mask.
virtual status_t getChannelMask(audio_channel_mask_t *mask);
// Return the audio format - e.g. AUDIO_FORMAT_PCM_16_BIT.
virtual status_t getFormat(audio_format_t *format);
// Convenience method.
virtual status_t getAudioProperties(
uint32_t *sampleRate, audio_channel_mask_t *mask, audio_format_t *format);
// Set audio stream parameters.
virtual status_t setParameters(const String8& kvPairs);
// Get audio stream parameters.
virtual status_t getParameters(const String8& keys, String8 *values);
// Add or remove the effect on the stream.
virtual status_t addEffect(sp<EffectHalInterface> effect);
virtual status_t removeEffect(sp<EffectHalInterface> effect);
// Put the audio hardware input/output into standby mode.
virtual status_t standby();
virtual status_t dump(int fd);
// Start a stream operating in mmap mode.
virtual status_t start() = 0;
// Stop a stream operating in mmap mode.
virtual status_t stop() = 0;
// Retrieve information on the data buffer in mmap mode.
virtual status_t createMmapBuffer(int32_t minSizeFrames,
struct audio_mmap_buffer_info *info) = 0;
// Get current read/write position in the mmap buffer
virtual status_t getMmapPosition(struct audio_mmap_position *position) = 0;
// Set the priority of the thread that interacts with the HAL
// (must match the priority of the audioflinger's thread that calls 'read' / 'write')
virtual status_t setHalThreadPriority(int priority);
protected:
// Subclasses can not be constructed directly by clients.
StreamHalLocal(audio_stream_t *stream, sp<DeviceHalLocal> device);
// The destructor automatically closes the stream.
virtual ~StreamHalLocal();
sp<DeviceHalLocal> mDevice;
// mStreamPowerLog is used for audio signal power logging.
StreamPowerLog mStreamPowerLog;
private:
audio_stream_t *mStream;
};
class StreamOutHalLocal : public StreamOutHalInterface, public StreamHalLocal {
public:
// Return the frame size (number of bytes per sample) of a stream.
virtual status_t getFrameSize(size_t *size);
// Return the audio hardware driver estimated latency in milliseconds.
virtual status_t getLatency(uint32_t *latency);
// Use this method in situations where audio mixing is done in the hardware.
virtual status_t setVolume(float left, float right);
// Write audio buffer to driver.
virtual status_t write(const void *buffer, size_t bytes, size_t *written);
// Return the number of audio frames written by the audio dsp to DAC since
// the output has exited standby.
virtual status_t getRenderPosition(uint32_t *dspFrames);
// Get the local time at which the next write to the audio driver will be presented.
virtual status_t getNextWriteTimestamp(int64_t *timestamp);
// Set the callback for notifying completion of non-blocking write and drain.
virtual status_t setCallback(wp<StreamOutHalInterfaceCallback> callback);
// Returns whether pause and resume operations are supported.
virtual status_t supportsPauseAndResume(bool *supportsPause, bool *supportsResume);
// Notifies to the audio driver to resume playback following a pause.
virtual status_t pause();
// Notifies to the audio driver to resume playback following a pause.
virtual status_t resume();
// Returns whether drain operation is supported.
virtual status_t supportsDrain(bool *supportsDrain);
// Requests notification when data buffered by the driver/hardware has been played.
virtual status_t drain(bool earlyNotify);
// Notifies to the audio driver to flush the queued data.
virtual status_t flush();
// Return a recent count of the number of audio frames presented to an external observer.
virtual status_t getPresentationPosition(uint64_t *frames, struct timespec *timestamp);
// Start a stream operating in mmap mode.
virtual status_t start();
// Stop a stream operating in mmap mode.
virtual status_t stop();
// Retrieve information on the data buffer in mmap mode.
virtual status_t createMmapBuffer(int32_t minSizeFrames,
struct audio_mmap_buffer_info *info);
// Get current read/write position in the mmap buffer
virtual status_t getMmapPosition(struct audio_mmap_position *position);
private:
audio_stream_out_t *mStream;
wp<StreamOutHalInterfaceCallback> mCallback;
friend class DeviceHalLocal;
// Can not be constructed directly by clients.
StreamOutHalLocal(audio_stream_out_t *stream, sp<DeviceHalLocal> device);
virtual ~StreamOutHalLocal();
static int asyncCallback(stream_callback_event_t event, void *param, void *cookie);
};
class StreamInHalLocal : public StreamInHalInterface, public StreamHalLocal {
public:
// Return the frame size (number of bytes per sample) of a stream.
virtual status_t getFrameSize(size_t *size);
// Set the input gain for the audio driver.
virtual status_t setGain(float gain);
// Read audio buffer in from driver.
virtual status_t read(void *buffer, size_t bytes, size_t *read);
// Return the amount of input frames lost in the audio driver.
virtual status_t getInputFramesLost(uint32_t *framesLost);
// Return a recent count of the number of audio frames received and
// the clock time associated with that frame count.
virtual status_t getCapturePosition(int64_t *frames, int64_t *time);
// Start a stream operating in mmap mode.
virtual status_t start();
// Stop a stream operating in mmap mode.
virtual status_t stop();
// Retrieve information on the data buffer in mmap mode.
virtual status_t createMmapBuffer(int32_t minSizeFrames,
struct audio_mmap_buffer_info *info);
// Get current read/write position in the mmap buffer
virtual status_t getMmapPosition(struct audio_mmap_position *position);
private:
audio_stream_in_t *mStream;
friend class DeviceHalLocal;
// Can not be constructed directly by clients.
StreamInHalLocal(audio_stream_in_t *stream, sp<DeviceHalLocal> device);
virtual ~StreamInHalLocal();
};
} // namespace android
#endif // ANDROID_HARDWARE_STREAM_HAL_LOCAL_H