blob: fed8cc81c88eeb295b0c825af482773b23c7bd3e [file] [log] [blame]
/*
* Copyright (C) 2018 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
// Enabled with TEE_SINK in Configuration.h
#ifndef ANDROID_NBAIO_TEE_H
#define ANDROID_NBAIO_TEE_H
#ifdef TEE_SINK
#include <atomic>
#include <mutex>
#include <set>
#include <cutils/properties.h>
#include <media/nbaio/NBAIO.h>
namespace android {
/**
* The NBAIO_Tee uses the NBAIO Pipe and PipeReader for nonblocking
* data collection, for eventual dump to log files.
* See https://source.android.com/devices/audio/debugging for how to
* enable by ro.debuggable and af.tee properties.
*
* The write() into the NBAIO_Tee is therefore nonblocking,
* but changing NBAIO_Tee formats with set() cannot be done during a write();
* usually the caller already implements this mutual exclusion.
*
* All other calls except set() vs write() may occur at any time.
*
* dump() disruption is minimized to the caller since system calls are executed
* in an asynchronous thread (when possible).
*
* Currently the NBAIO_Tee is "hardwired" for AudioFlinger support.
*
* Some AudioFlinger specific notes:
*
* 1) Tees capture only linear PCM data.
* 2) Tees without any data written are considered empty and do not generate
* any output files.
* 2) Once a Tee dumps data, it is considered "emptied" and new data
* needs to be written before another Tee file is generated.
* 3) Tee file format is
* WAV integer PCM 16 bit for AUDIO_FORMAT_PCM_8_BIT, AUDIO_FORMAT_PCM_16_BIT.
* WAV integer PCM 32 bit for AUDIO_FORMAT_PCM_8_24_BIT, AUDIO_FORMAT_PCM_24_BIT_PACKED
* AUDIO_FORMAT_PCM_32_BIT.
* WAV float PCM 32 bit for AUDIO_FORMAT_PCM_FLOAT.
*
* Input_Thread:
* 1) Capture buffer is teed when read from the HAL, before resampling for the AudioRecord
* client.
*
* Output_Thread:
* 1) MixerThreads will tee at the FastMixer output (if it has one) or at the
* NormalMixer output (if no FastMixer).
* 2) DuplicatingThreads do not tee any mixed data. Apply a tee on the downstream OutputTrack
* or on the upstream playback Tracks.
* 3) DirectThreads and OffloadThreads do not tee any data. The upstream track
* (if linear PCM format) may be teed to discover data.
* 4) MmapThreads are not supported.
*
* Tracks:
* 1) RecordTracks and playback Tracks tee as data is being written to or
* read from the shared client-server track buffer by the associated Threads.
* 2) The mechanism is on the AudioBufferProvider release() so large static Track
* playback may not show any Tee data depending on when it is released.
* 3) When a track becomes inactive, the Thread will trigger a dump.
*/
class NBAIO_Tee {
public:
/* TEE_FLAG is used in set() and must match the flags for the af.tee property
given in https://source.android.com/devices/audio/debugging
*/
enum TEE_FLAG {
TEE_FLAG_NONE = 0,
TEE_FLAG_INPUT_THREAD = (1 << 0), // treat as a Tee for input (Capture) Threads
TEE_FLAG_OUTPUT_THREAD = (1 << 1), // treat as a Tee for output (Playback) Threads
TEE_FLAG_TRACK = (1 << 2), // treat as a Tee for tracks (Record and Playback)
};
NBAIO_Tee()
: mTee(std::make_shared<NBAIO_TeeImpl>())
{
getRunningTees().add(mTee);
}
~NBAIO_Tee() {
getRunningTees().remove(mTee);
dump(-1, "_DTOR"); // log any data remaining in Tee.
}
/**
* \brief set is used for deferred configuration of Tee.
*
* May be called anytime except concurrently with write().
*
* \param format NBAIO_Format used to open NBAIO pipes
* \param flags (https://source.android.com/devices/audio/debugging)
* - TEE_FLAG_NONE to bypass af.tee property checks (default);
* - TEE_FLAG_INPUT_THREAD to check af.tee if input thread logging set;
* - TEE_FLAG_OUTPUT_THREAD to check af.tee if output thread logging set;
* - TEE_FLAG_TRACK to check af.tee if track logging set.
* \param frames number of frames to open the NBAIO pipe (set to 0 to use default).
*
* \return
* - NO_ERROR on success (or format unchanged)
* - BAD_VALUE if format or flags invalid.
* - PERMISSION_DENIED if flags not allowed by af.tee
*/
status_t set(const NBAIO_Format &format,
TEE_FLAG flags = TEE_FLAG_NONE, size_t frames = 0) const {
return mTee->set(format, flags, frames);
}
status_t set(uint32_t sampleRate, uint32_t channelCount, audio_format_t format,
TEE_FLAG flags = TEE_FLAG_NONE, size_t frames = 0) const {
return mTee->set(Format_from_SR_C(sampleRate, channelCount, format), flags, frames);
}
/**
* \brief write data to the tee.
*
* This call is lock free (as shared pointer and NBAIO is lock free);
* may be called simultaneous to all methods except set().
*
* \param buffer to write to pipe.
* \param frameCount in frames as specified by the format passed to set()
*/
void write(const void *buffer, size_t frameCount) const {
mTee->write(buffer, frameCount);
}
/** sets Tee id string which identifies the generated file (should be unique). */
void setId(const std::string &id) const {
mTee->setId(id);
}
/**
* \brief dump the audio content written to the Tee.
*
* \param fd file descriptor to write dumped filename for logging, use -1 to ignore.
* \param reason string suffix to append to the generated file.
*/
void dump(int fd, const std::string &reason = "") const {
mTee->dump(fd, reason);
}
/**
* \brief dump all Tees currently alive.
*
* \param fd file descriptor to write dumped filename for logging, use -1 to ignore.
* \param reason string suffix to append to the generated file.
*/
static void dumpAll(int fd, const std::string &reason = "") {
getRunningTees().dump(fd, reason);
}
private:
/** The underlying implementation of the Tee - the lifetime is through
a shared pointer so destruction of the NBAIO_Tee container may proceed
even though dumping is occurring. */
class NBAIO_TeeImpl {
public:
status_t set(const NBAIO_Format &format, TEE_FLAG flags, size_t frames) {
static const int teeConfig = property_get_bool("ro.debuggable", false)
? property_get_int32("af.tee", 0) : 0;
// check the type of Tee
const TEE_FLAG type = TEE_FLAG(
flags & (TEE_FLAG_INPUT_THREAD | TEE_FLAG_OUTPUT_THREAD | TEE_FLAG_TRACK));
// parameter flags can't select multiple types.
if (__builtin_popcount(type) > 1) {
return BAD_VALUE;
}
// if type is set, we check to see if it is permitted by configuration.
if (type != 0 && (type & teeConfig) == 0) {
return PERMISSION_DENIED;
}
// determine number of frames for Tee
if (frames == 0) {
// TODO: consider varying frame count based on type.
frames = DEFAULT_TEE_FRAMES;
}
// TODO: should we check minimum number of frames?
// don't do anything if format and frames are the same.
if (Format_isEqual(format, mFormat) && frames == mFrames) {
return NO_ERROR;
}
bool enabled = false;
auto sinksource = makeSinkSource(format, frames, &enabled);
// enabled is set if makeSinkSource is successful.
// Note: as mentioned in NBAIO_Tee::set(), don't call set() while write() is
// ongoing.
if (enabled) {
std::lock_guard<std::mutex> _l(mLock);
mFlags = flags;
mFormat = format; // could get this from the Sink.
mFrames = frames;
mSinkSource = std::move(sinksource);
mEnabled.store(true);
return NO_ERROR;
}
return BAD_VALUE;
}
void setId(const std::string &id) {
std::lock_guard<std::mutex> _l(mLock);
mId = id;
}
void dump(int fd, const std::string &reason) {
if (!mDataReady.exchange(false)) return;
std::string suffix;
NBAIO_SinkSource sinkSource;
{
std::lock_guard<std::mutex> _l(mLock);
suffix = mId + reason;
sinkSource = mSinkSource;
}
dumpTee(fd, sinkSource, suffix);
}
void write(const void *buffer, size_t frameCount) {
if (!mEnabled.load() || frameCount == 0) return;
(void)mSinkSource.first->write(buffer, frameCount);
mDataReady.store(true);
}
private:
// TRICKY: We need to keep the NBAIO_Sink and NBAIO_Source both alive at the same time
// because PipeReader holds a naked reference (not a strong or weak pointer) to Pipe.
using NBAIO_SinkSource = std::pair<sp<NBAIO_Sink>, sp<NBAIO_Source>>;
static void dumpTee(int fd, const NBAIO_SinkSource& sinkSource, const std::string& suffix);
static NBAIO_SinkSource makeSinkSource(
const NBAIO_Format &format, size_t frames, bool *enabled);
// 0x200000 stereo 16-bit PCM frames = 47.5 seconds at 44.1 kHz, 8 megabytes
static constexpr size_t DEFAULT_TEE_FRAMES = 0x200000;
// atomic status checking
std::atomic<bool> mEnabled{false};
std::atomic<bool> mDataReady{false};
// locked dump information
mutable std::mutex mLock;
std::string mId; // GUARDED_BY(mLock)
TEE_FLAG mFlags = TEE_FLAG_NONE; // GUARDED_BY(mLock)
NBAIO_Format mFormat = Format_Invalid; // GUARDED_BY(mLock)
size_t mFrames = 0; // GUARDED_BY(mLock)
NBAIO_SinkSource mSinkSource; // GUARDED_BY(mLock)
};
/** RunningTees tracks current running tees for dump purposes.
It is implemented to have minimal locked regions, to be transparent to the caller. */
class RunningTees {
public:
void add(const std::shared_ptr<NBAIO_TeeImpl> &tee) {
std::lock_guard<std::mutex> _l(mLock);
ALOGW_IF(!mTees.emplace(tee).second,
"%s: %p already exists in mTees", __func__, tee.get());
}
void remove(const std::shared_ptr<NBAIO_TeeImpl> &tee) {
std::lock_guard<std::mutex> _l(mLock);
ALOGW_IF(mTees.erase(tee) != 1,
"%s: %p doesn't exist in mTees", __func__, tee.get());
}
void dump(int fd, const std::string &reason) {
std::vector<std::shared_ptr<NBAIO_TeeImpl>> tees; // safe snapshot of tees
{
std::lock_guard<std::mutex> _l(mLock);
tees.insert(tees.end(), mTees.begin(), mTees.end());
}
for (const auto &tee : tees) {
tee->dump(fd, reason);
}
}
private:
std::mutex mLock;
std::set<std::shared_ptr<NBAIO_TeeImpl>> mTees; // GUARDED_BY(mLock)
};
// singleton
static RunningTees &getRunningTees() {
static RunningTees runningTees;
return runningTees;
}
// The NBAIO TeeImpl may have lifetime longer than NBAIO_Tee if
// RunningTees::dump() is being called simultaneous to ~NBAIO_Tee().
// This is allowed for maximum concurrency.
const std::shared_ptr<NBAIO_TeeImpl> mTee;
}; // NBAIO_Tee
} // namespace android
#endif // TEE_SINK
#endif // !ANDROID_NBAIO_TEE_H