blob: c04ccf9c2fd0f4b07327e713290cddcc2694237b [file] [log] [blame]
* Copyright (c) 2012 The WebRTC project authors. All Rights Reserved.
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
#include <vector>
#include "webrtc/base/buffer.h"
#include "webrtc/base/scoped_ptr.h"
#include "webrtc/base/thread_annotations.h"
#include "webrtc/common_types.h"
#include "webrtc/engine_configurations.h"
#include "webrtc/modules/audio_coding/main/acm2/acm_receiver.h"
#include "webrtc/modules/audio_coding/main/acm2/acm_resampler.h"
#include "webrtc/modules/audio_coding/main/acm2/codec_manager.h"
namespace webrtc {
class CriticalSectionWrapper;
class AudioCodingImpl;
namespace acm2 {
class AudioCodingModuleImpl final : public AudioCodingModule {
friend webrtc::AudioCodingImpl;
explicit AudioCodingModuleImpl(const AudioCodingModule::Config& config);
~AudioCodingModuleImpl() override;
// Sender
// Can be called multiple times for Codec, CNG, RED.
int RegisterSendCodec(const CodecInst& send_codec) override;
void RegisterExternalSendCodec(
AudioEncoder* external_speech_encoder) override;
// Get current send codec.
rtc::Optional<CodecInst> SendCodec() const override;
// Get current send frequency.
int SendFrequency() const override;
// Sets the bitrate to the specified value in bits/sec. In case the codec does
// not support the requested value it will choose an appropriate value
// instead.
void SetBitRate(int bitrate_bps) override;
// Register a transport callback which will be
// called to deliver the encoded buffers.
int RegisterTransportCallback(AudioPacketizationCallback* transport) override;
// Add 10 ms of raw (PCM) audio data to the encoder.
int Add10MsData(const AudioFrame& audio_frame) override;
// (RED) Redundant Coding
// Configure RED status i.e. on/off.
int SetREDStatus(bool enable_red) override;
// Get RED status.
bool REDStatus() const override;
// (FEC) Forward Error Correction (codec internal)
// Configure FEC status i.e. on/off.
int SetCodecFEC(bool enabled_codec_fec) override;
// Get FEC status.
bool CodecFEC() const override;
// Set target packet loss rate
int SetPacketLossRate(int loss_rate) override;
// (VAD) Voice Activity Detection
// and
// (CNG) Comfort Noise Generation
int SetVAD(bool enable_dtx = true,
bool enable_vad = false,
ACMVADMode mode = VADNormal) override;
int VAD(bool* dtx_enabled,
bool* vad_enabled,
ACMVADMode* mode) const override;
int RegisterVADCallback(ACMVADCallback* vad_callback) override;
// Receiver
// Initialize receiver, resets codec database etc.
int InitializeReceiver() override;
// Get current receive frequency.
int ReceiveFrequency() const override;
// Get current playout frequency.
int PlayoutFrequency() const override;
// Register possible receive codecs, can be called multiple times,
// for codecs, CNG, DTMF, RED.
int RegisterReceiveCodec(const CodecInst& receive_codec) override;
int RegisterExternalReceiveCodec(int rtp_payload_type,
AudioDecoder* external_decoder,
int sample_rate_hz,
int num_channels) override;
// Get current received codec.
int ReceiveCodec(CodecInst* current_codec) const override;
// Incoming packet from network parsed and ready for decode.
int IncomingPacket(const uint8_t* incoming_payload,
const size_t payload_length,
const WebRtcRTPHeader& rtp_info) override;
// Incoming payloads, without rtp-info, the rtp-info will be created in ACM.
// One usage for this API is when pre-encoded files are pushed in ACM.
int IncomingPayload(const uint8_t* incoming_payload,
const size_t payload_length,
uint8_t payload_type,
uint32_t timestamp) override;
// Minimum playout delay.
int SetMinimumPlayoutDelay(int time_ms) override;
// Maximum playout delay.
int SetMaximumPlayoutDelay(int time_ms) override;
// Smallest latency NetEq will maintain.
int LeastRequiredDelayMs() const override;
// Get playout timestamp.
int PlayoutTimestamp(uint32_t* timestamp) override;
// Get 10 milliseconds of raw audio data to play out, and
// automatic resample to the requested frequency if > 0.
int PlayoutData10Ms(int desired_freq_hz, AudioFrame* audio_frame) override;
// Statistics
int GetNetworkStatistics(NetworkStatistics* statistics) override;
int SetOpusApplication(OpusApplicationMode application) override;
// If current send codec is Opus, informs it about the maximum playback rate
// the receiver will render.
int SetOpusMaxPlaybackRate(int frequency_hz) override;
int EnableOpusDtx() override;
int DisableOpusDtx() override;
int UnregisterReceiveCodec(uint8_t payload_type) override;
int EnableNack(size_t max_nack_list_size) override;
void DisableNack() override;
std::vector<uint16_t> GetNackList(int64_t round_trip_time_ms) const override;
void GetDecodingCallStatistics(AudioDecodingCallStats* stats) const override;
struct InputData {
uint32_t input_timestamp;
const int16_t* audio;
size_t length_per_channel;
uint8_t audio_channel;
// If a re-mix is required (up or down), this buffer will store a re-mixed
// version of the input.
int16_t buffer[WEBRTC_10MS_PCM_AUDIO];
// This member class writes values to the named UMA histogram, but only if
// the value has changed since the last time (and always for the first call).
class ChangeLogger {
explicit ChangeLogger(const std::string& histogram_name)
: histogram_name_(histogram_name) {}
// Logs the new value if it is different from the last logged value, or if
// this is the first call.
void MaybeLog(int value);
int last_value_ = 0;
int first_time_ = true;
const std::string histogram_name_;
int Add10MsDataInternal(const AudioFrame& audio_frame, InputData* input_data)
int Encode(const InputData& input_data)
int InitializeReceiverSafe() EXCLUSIVE_LOCKS_REQUIRED(acm_crit_sect_);
bool HaveValidEncoder(const char* caller_name) const
// Preprocessing of input audio, including resampling and down-mixing if
// required, before pushing audio into encoder's buffer.
// in_frame: input audio-frame
// ptr_out: pointer to output audio_frame. If no preprocessing is required
// |ptr_out| will be pointing to |in_frame|, otherwise pointing to
// |preprocess_frame_|.
// Return value:
// -1: if encountering an error.
// 0: otherwise.
int PreprocessToAddData(const AudioFrame& in_frame,
const AudioFrame** ptr_out)
// Change required states after starting to receive the codec corresponding
// to |index|.
int UpdateUponReceivingCodec(int index);
const rtc::scoped_ptr<CriticalSectionWrapper> acm_crit_sect_;
rtc::Buffer encode_buffer_ GUARDED_BY(acm_crit_sect_);
int id_; // TODO(henrik.lundin) Make const.
uint32_t expected_codec_ts_ GUARDED_BY(acm_crit_sect_);
uint32_t expected_in_ts_ GUARDED_BY(acm_crit_sect_);
ACMResampler resampler_ GUARDED_BY(acm_crit_sect_);
AcmReceiver receiver_; // AcmReceiver has it's own internal lock.
ChangeLogger bitrate_logger_ GUARDED_BY(acm_crit_sect_);
CodecManager codec_manager_ GUARDED_BY(acm_crit_sect_);
// This is to keep track of CN instances where we can send DTMFs.
uint8_t previous_pltype_ GUARDED_BY(acm_crit_sect_);
// Used when payloads are pushed into ACM without any RTP info
// One example is when pre-encoded bit-stream is pushed from
// a file.
// IMPORTANT: this variable is only used in IncomingPayload(), therefore,
// no lock acquired when interacting with this variable. If it is going to
// be used in other methods, locks need to be taken.
rtc::scoped_ptr<WebRtcRTPHeader> aux_rtp_header_;
bool receiver_initialized_ GUARDED_BY(acm_crit_sect_);
AudioFrame preprocess_frame_ GUARDED_BY(acm_crit_sect_);
bool first_10ms_data_ GUARDED_BY(acm_crit_sect_);
bool first_frame_ GUARDED_BY(acm_crit_sect_);
uint32_t last_timestamp_ GUARDED_BY(acm_crit_sect_);
uint32_t last_rtp_timestamp_ GUARDED_BY(acm_crit_sect_);
const rtc::scoped_ptr<CriticalSectionWrapper> callback_crit_sect_;
AudioPacketizationCallback* packetization_callback_
ACMVADCallback* vad_callback_ GUARDED_BY(callback_crit_sect_);
} // namespace acm2
} // namespace webrtc