Merge Android Pie into master

Bug: 112104996
Change-Id: Ic00524e8aebe77b55a213ac0783911b7902c88f9
tree: ab4908b30d89402c2f18ffaacb8a95402ab286bf
  1. android/
  2. arduino/
  3. docs/
  4. hardware/
  5. ios/
  6. pywalt/
  7. server/
  8. AUTHORS
  9. CONTRIBUTING.md
  10. CONTRIBUTORS
  11. LICENSE
  12. MODULE_LICENSE_APACHE2
  13. NOTICE
  14. README.google
  15. README.md
README.md

WALT Latency Timer

DISCLAIMER: This is not an official Google product.

WALT is designed to measure the latency of physical sensors and outputs on phones and computers. It can currently perform the following measurements:

  • Tap latency - time from the moment a finger-like probe touches down (or up) on the screen until the kernel timestamps an ACTION_DOWN (or ACTION_UP) event. This physical contact with the screen is timed using an accelerometer mounted on the probe.
  • Drag latency (scroll).
  • Screen draw latency - using a photodiode that detects whether the screen is black or white.
  • Audio output and microphone latencies.
  • MIDI input and output latencies

The WALT app for Android can be installed from Google Play or downloaded in the releases section; the iOS app must be built from source.

WALT photo

Notes

  • Hardware build instructions can be found in this repository under hardware/.
  • Clock synchronization details are described here.
  • The Android/iOS device and Teensy clocks have a tendency to diverge due to differing clock frequencies. This means they will go out of sync after several minutes. The workaround is to use the app to re-sync the clocks. Some, but not all tests in the app will sync the clocks when starting a measurement.
  • Python code used to communicate with WALT from Linux and ChromeOS can be found here.