Snap for 6203617 from 7af2b12b8bca1dca39cdb90407bf492206acfd0d to rvc-release
Change-Id: I44e7866639e666a0128dfd3c2c63d98040b1ff44
tree: 78b9321cf789ee70298ed909e16956d1603755a9
- android/
- arduino/
- docs/
- hardware/
- ios/
- pywalt/
- server/
- AUTHORS
- CONTRIBUTING.md
- CONTRIBUTORS
- LICENSE
- MODULE_LICENSE_APACHE2
- NOTICE
- OWNERS
- README.google
- README.md
README.md
WALT Latency Timer
DISCLAIMER: This is not an official Google product.
WALT is designed to measure the latency of physical sensors and outputs on phones and computers. It can currently perform the following measurements:
- Tap latency - time from the moment a finger-like probe touches down (or up) on the screen until the kernel timestamps an ACTION_DOWN (or ACTION_UP) event. This physical contact with the screen is timed using an accelerometer mounted on the probe.
- Drag latency (scroll).
- Screen draw latency - using a photodiode that detects whether the screen is black or white.
- Audio output and microphone latencies.
- MIDI input and output latencies
The WALT app for Android can be installed from Google Play or downloaded in the releases section; the iOS app must be built from source.
Notes
- Hardware build instructions can be found in this repository under
hardware/. - Clock synchronization details are described here.
- The Android/iOS device and Teensy clocks have a tendency to diverge due to differing clock frequencies. This means they will go out of sync after several minutes. The workaround is to use the app to re-sync the clocks. Some, but not all tests in the app will sync the clocks when starting a measurement.
- Python code used to communicate with WALT from Linux and ChromeOS can be found here.
