
##------------------------------------------------------------##
# 
# The multiple-architecture stuff in this file is pretty
# cryptic.  Read docs/internals/multiple-architectures.txt
# for at least a partial explanation of what is going on.
#
##------------------------------------------------------------##

# Process this file with autoconf to produce a configure script.
AC_INIT([Valgrind],[3.7.0.SVN],[valgrind-users@lists.sourceforge.net])
AC_CONFIG_SRCDIR(coregrind/m_main.c)
AC_CONFIG_HEADERS([config.h])
AM_INIT_AUTOMAKE([foreign])

AM_MAINTAINER_MODE

#----------------------------------------------------------------------------
# Checks for various programs.
#----------------------------------------------------------------------------
CFLAGS="-Wno-long-long $CFLAGS"

AC_PROG_LN_S
AC_PROG_CC
AM_PROG_CC_C_O
AC_PROG_CPP
AC_PROG_CXX
# AC_PROG_OBJC apparently causes problems on older Linux distros (eg. with
# autoconf 2.59).  If we ever have any Objective-C code in the Valgrind code
# base (eg. most likely as Darwin-specific tests) we'll need one of the
# following:
# - put AC_PROG_OBJC in a Darwin-specific part of this file
# - Use AC_PROG_OBJC here and up the minimum autoconf version
# - Use the following, which is apparently equivalent:
#     m4_ifdef([AC_PROG_OBJC],
#        [AC_PROG_OBJC],
#        [AC_CHECK_TOOL([OBJC], [gcc])
#         AC_SUBST([OBJC])
#         AC_SUBST([OBJCFLAGS])
#        ])
AC_PROG_RANLIB
# provide a very basic definition for AC_PROG_SED if it's not provided by
# autoconf (as e.g. in autoconf 2.59).
m4_ifndef([AC_PROG_SED],
          [AC_DEFUN([AC_PROG_SED],
                    [AC_ARG_VAR([SED])
                     AC_CHECK_PROGS([SED],[gsed sed])])])
AC_PROG_SED

# If no AR variable was specified, look up the name of the archiver. Otherwise
# do not touch the AR variable.
if test "x$AR" = "x"; then
  AC_PATH_PROGS([AR], [`echo $LD | $SED 's/ld$/ar/'` "ar"], [ar])
fi
AC_ARG_VAR([AR],[Archiver command])

# Check for the compiler support
if test "${GCC}" != "yes" ; then
   AC_MSG_ERROR([Valgrind relies on GCC to be compiled])
fi

# figure out where perl lives
AC_PATH_PROG(PERL, perl)

# figure out where gdb lives
AC_PATH_PROG(GDB, gdb, "/no/gdb/was/found/at/configure/time")
AC_DEFINE_UNQUOTED(GDB_PATH, "$GDB", [path to GDB])

# some older automake's don't have it so try something on our own
ifdef([AM_PROG_AS],[AM_PROG_AS],
[
AS="${CC}"
AC_SUBST(AS)

ASFLAGS=""
AC_SUBST(ASFLAGS)
])


# Check if 'diff' supports -u (universal diffs) and use it if possible.

AC_MSG_CHECKING([for diff -u])
AC_SUBST(DIFF)

# Comparing two identical files results in 0.
tmpfile="tmp-xxx-yyy-zzz"
touch $tmpfile;
if diff -u $tmpfile $tmpfile ; then
    AC_MSG_RESULT([yes])
    DIFF="diff -u"
else
    AC_MSG_RESULT([no])
    DIFF="diff"
fi
rm $tmpfile


# We don't want gcc < 3.0
AC_MSG_CHECKING([for a supported version of gcc])

# Try to get the gcc version, sed-ing out some unexpected stuff
# that appears with the default gcc on OSX 10.6 and 10.7 respectively.
# Without this, the version number comes out as 686, 10 or 11 :-(
# 
# i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5666) (dot 3)
# i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2335.15.00)
#
[gcc_version=`${CC} --version \
             | head -n 1 \
             | $SED 's/i686-apple-darwin10//' \
             | $SED 's/i686-apple-darwin11//' \
             | $SED 's/^[^0-9]*\([0-9.]*\).*$/\1/'`]

is_clang="notclang"
if test "x`${CC} --version | head -n 1 | $SED 's/\(clang\) version.*/\1/'`" = "xclang" ; then
   is_clang="clang"
fi

case "${is_clang}-${gcc_version}" in
     notclang-3.*)
	AC_MSG_RESULT([ok (${gcc_version})])
	;;
     notclang-4.*)
	AC_MSG_RESULT([ok (${gcc_version})])
	;;
     clang-2.9)
	AC_MSG_RESULT([ok (clang-${gcc_version})])
	;;
     *)
	AC_MSG_RESULT([no (${gcc_version})])
	AC_MSG_ERROR([please use gcc >= 3.0 or clang >= 2.9])
	;;
esac

#----------------------------------------------------------------------------
# Arch/OS/platform tests.
#----------------------------------------------------------------------------
# We create a number of arch/OS/platform-related variables.  We prefix them
# all with "VGCONF_" which indicates that they are defined at
# configure-time, and distinguishes them from the VGA_*/VGO_*/VGP_*
# variables used when compiling C files.

AC_CANONICAL_HOST

AC_MSG_CHECKING([for a supported CPU])

# ARCH_MAX reflects the most that this CPU can do: for example if it
# is a 64-bit capable PowerPC, then it must be set to ppc64 and not ppc32.
# Ditto for amd64.  It is used for more configuration below, but is not used
# outside this file.
case "${host_cpu}" in
     i?86) 
	AC_MSG_RESULT([ok (${host_cpu})])
        ARCH_MAX="x86"
        ;;

     x86_64) 
        AC_MSG_RESULT([ok (${host_cpu})])
        ARCH_MAX="amd64"
        ;;

     powerpc64)
        AC_MSG_RESULT([ok (${host_cpu})])
        ARCH_MAX="ppc64"
        ;;

     powerpc)
        # On Linux this means only a 32-bit capable CPU.
        AC_MSG_RESULT([ok (${host_cpu})])
        ARCH_MAX="ppc32"
        ;;

     s390x)
        AC_MSG_RESULT([ok (${host_cpu})])
        ARCH_MAX="s390x"
        ;;

     armv7*)
	AC_MSG_RESULT([ok (${host_cpu})])
	ARCH_MAX="arm"
	;;

     *) 
	AC_MSG_RESULT([no (${host_cpu})])
	AC_MSG_ERROR([Unsupported host architecture. Sorry])
	;;
esac

#----------------------------------------------------------------------------

# Sometimes it's convenient to subvert the bi-arch build system and
# just have a single build even though the underlying platform is
# capable of both.  Hence handle --enable-only64bit and
# --enable-only32bit.  Complain if both are issued :-)
# [Actually, if either of these options are used, I think both get built,
# but only one gets installed.  So if you use an in-place build, both can be
# used. --njn]

# Check if a 64-bit only build has been requested
AC_CACHE_CHECK([for a 64-bit only build], vg_cv_only64bit,
   [AC_ARG_ENABLE(only64bit, 
      [  --enable-only64bit      do a 64-bit only build],
      [vg_cv_only64bit=$enableval],
      [vg_cv_only64bit=no])])

# Check if a 32-bit only build has been requested
AC_CACHE_CHECK([for a 32-bit only build], vg_cv_only32bit,
   [AC_ARG_ENABLE(only32bit, 
      [  --enable-only32bit      do a 32-bit only build],
      [vg_cv_only32bit=$enableval],
      [vg_cv_only32bit=no])])

# Stay sane
if test x$vg_cv_only64bit = xyes -a x$vg_cv_only32bit = xyes; then
   AC_MSG_ERROR(
      [Nonsensical: both --enable-only64bit and --enable-only32bit.])
fi

#----------------------------------------------------------------------------

# VGCONF_OS is the primary build OS, eg. "linux".  It is passed in to
# compilation of many C files via -VGO_$(VGCONF_OS) and
# -VGP_$(VGCONF_ARCH_PRI)_$(VGCONF_OS).
AC_MSG_CHECKING([for a supported OS])
AC_SUBST(VGCONF_OS)

DEFAULT_SUPP=""

case "${host_os}" in
     *linux*)
	AC_MSG_RESULT([ok (${host_os})])
        VGCONF_OS="linux"

        # Ok, this is linux. Check the kernel version
        AC_MSG_CHECKING([for the kernel version])

        kernel=`uname -r`

        case "${kernel}" in
             2.6.*|3.*) 
        	    AC_MSG_RESULT([2.6.x/3.x family (${kernel})])
        	    AC_DEFINE([KERNEL_2_6], 1, [Define to 1 if you're using Linux 2.6.x or Linux 3.x])
        	    ;;

             2.4.*) 
        	    AC_MSG_RESULT([2.4 family (${kernel})])
        	    AC_DEFINE([KERNEL_2_4], 1, [Define to 1 if you're using Linux 2.4.x])
        	    ;;

             *) 
        	    AC_MSG_RESULT([unsupported (${kernel})])
        	    AC_MSG_ERROR([Valgrind works on kernels 2.4, 2.6])
        	    ;;
        esac

        ;;

     *darwin*)
        AC_MSG_RESULT([ok (${host_os})])
        VGCONF_OS="darwin"
        AC_DEFINE([DARWIN_10_5], 100500, [DARWIN_VERS value for Mac OS X 10.5])
        AC_DEFINE([DARWIN_10_6], 100600, [DARWIN_VERS value for Mac OS X 10.6])
        AC_DEFINE([DARWIN_10_7], 100700, [DARWIN_VERS value for Mac OS X 10.7])

	AC_MSG_CHECKING([for the kernel version])
	kernel=`uname -r`

        # Nb: for Darwin we set DEFAULT_SUPP here.  That's because Darwin
        # has only one relevant version, the OS version. The `uname` check
        # is a good way to get that version (i.e. "Darwin 9.6.0" is Mac OS
        # X 10.5.6, and "Darwin 10.x" is Mac OS X 10.6.x Snow Leopard,
        # and possibly "Darwin 11.x" is Mac OS X 10.7.x Lion), 
        # and we don't know of an macros similar to __GLIBC__ to get that info.
        #
        # XXX: `uname -r` won't do the right thing for cross-compiles, but
        # that's not a problem yet.
        #
        # jseward 21 Sept 2011: I seriously doubt whether V 3.7.0 will work
        # on OS X 10.5.x; I haven't tested yet, and only plan to test 3.7.0
        # on 10.6.8 and 10.7.1.  Although tempted to delete the configure
        # time support for 10.5 (the 9.* pattern just below), I'll leave it
        # in for now, just in case anybody wants to give it a try.  But I'm
        # assuming that 3.7.0 is a Snow Leopard and Lion-only release.
	case "${kernel}" in
	     9.*)
		  AC_MSG_RESULT([Darwin 9.x (${kernel}) / Mac OS X 10.5 Leopard])
		  AC_DEFINE([DARWIN_VERS], DARWIN_10_5, [Darwin / Mac OS X version])
		  DEFAULT_SUPP="darwin9.supp ${DEFAULT_SUPP}"
		  DEFAULT_SUPP="darwin9-drd.supp ${DEFAULT_SUPP}"
		  ;;
	     10.*)
		  AC_MSG_RESULT([Darwin 10.x (${kernel}) / Mac OS X 10.6 Snow Leopard])
		  AC_DEFINE([DARWIN_VERS], DARWIN_10_6, [Darwin / Mac OS X version])
		  DEFAULT_SUPP="darwin10.supp ${DEFAULT_SUPP}"
		  DEFAULT_SUPP="darwin10-drd.supp ${DEFAULT_SUPP}"
		  ;;
	     11.*)
		  AC_MSG_RESULT([Darwin 11.x (${kernel}) / Mac OS X 10.7 Lion])
		  AC_DEFINE([DARWIN_VERS], DARWIN_10_7, [Darwin / Mac OS X version])
                  # FIXME: change these to xx11.supp
		  DEFAULT_SUPP="darwin11.supp ${DEFAULT_SUPP}"
		  DEFAULT_SUPP="darwin10-drd.supp ${DEFAULT_SUPP}"
		  ;;
             *) 
		  AC_MSG_RESULT([unsupported (${kernel})])
		  AC_MSG_ERROR([Valgrind works on Darwin 10.x and 11.x (Mac OS X 10.6/7)])
		  ;;
	esac
        ;;

     *) 
	AC_MSG_RESULT([no (${host_os})])
	AC_MSG_ERROR([Valgrind is operating system specific. Sorry.])
	;;
esac

#----------------------------------------------------------------------------

# If we are building on a 64 bit platform test to see if the system
# supports building 32 bit programs and disable 32 bit support if it
# does not support building 32 bit programs

case "$ARCH_MAX-$VGCONF_OS" in
     amd64-linux|ppc64-linux)
        AC_MSG_CHECKING([for 32 bit build support])
        safe_CFLAGS=$CFLAGS
        CFLAGS="-m32"
        AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[
          return 0;
        ]])], [
        AC_MSG_RESULT([yes])
        ], [
        vg_cv_only64bit="yes"
        AC_MSG_RESULT([no])
        ])
        CFLAGS=$safe_CFLAGS;;
esac

if test x$vg_cv_only64bit = xyes -a x$vg_cv_only32bit = xyes; then
   AC_MSG_ERROR(
      [--enable-only32bit was specified but system does not support 32 bit builds])
fi

#----------------------------------------------------------------------------

# VGCONF_ARCH_PRI is the arch for the primary build target, eg. "amd64".  By
# default it's the same as ARCH_MAX.  But if, say, we do a build on an amd64
# machine, but --enable-only32bit has been requested, then ARCH_MAX (see
# above) will be "amd64" since that reflects the most that this cpu can do,
# but VGCONF_ARCH_PRI will be downgraded to "x86", since that reflects the
# arch corresponding to the primary build (VGCONF_PLATFORM_PRI_CAPS).  It is
# passed in to compilation of many C files via -VGA_$(VGCONF_ARCH_PRI) and
# -VGP_$(VGCONF_ARCH_PRI)_$(VGCONF_OS).
AC_SUBST(VGCONF_ARCH_PRI)

# VGCONF_ARCH_SEC is the arch for the secondary build target, eg. "x86".
# It is passed in to compilation of many C files via -VGA_$(VGCONF_ARCH_SEC)
# and -VGP_$(VGCONF_ARCH_SEC)_$(VGCONF_OS), if there is a secondary target.
# It is empty if there is no secondary target.
AC_SUBST(VGCONF_ARCH_SEC)

# VGCONF_PLATFORM_PRI_CAPS is the primary build target, eg. "AMD64_LINUX".
# The entire system, including regression and performance tests, will be
# built for this target.  The "_CAPS" indicates that the name is in capital
# letters, and it also uses '_' rather than '-' as a separator, because it's
# used to create various Makefile variables, which are all in caps by
# convention and cannot contain '-' characters.  This is in contrast to
# VGCONF_ARCH_PRI and VGCONF_OS which are not in caps.
AC_SUBST(VGCONF_PLATFORM_PRI_CAPS)

# VGCONF_PLATFORM_SEC_CAPS is the secondary build target, if there is one.
# Valgrind and tools will also be built for this target, but not the
# regression or performance tests.
#
# By default, the primary arch is the same as the "max" arch, as commented
# above (at the definition of ARCH_MAX).  We may choose to downgrade it in
# the big case statement just below here, in the case where we're building
# on a 64 bit machine but have been requested only to do a 32 bit build.
AC_SUBST(VGCONF_PLATFORM_SEC_CAPS)

AC_MSG_CHECKING([for a supported CPU/OS combination])

# NB.  The load address for a given platform may be specified in more 
# than one place, in some cases, depending on whether we're doing a biarch,
# 32-bit only or 64-bit only build.  eg see case for amd64-linux below.
# Be careful to give consistent values in all subcases.  Also, all four
# valt_load_addres_{pri,sec}_{norml,inner} values must always be set,
# even if it is to "0xUNSET".
#
case "$ARCH_MAX-$VGCONF_OS" in
     x86-linux)
        VGCONF_ARCH_PRI="x86"
        VGCONF_ARCH_SEC=""
	VGCONF_PLATFORM_PRI_CAPS="X86_LINUX"
	VGCONF_PLATFORM_SEC_CAPS=""
        valt_load_address_pri_norml="0x38000000"
        valt_load_address_pri_inner="0x28000000"
        valt_load_address_sec_norml="0xUNSET"
        valt_load_address_sec_inner="0xUNSET"
        AC_MSG_RESULT([ok (${ARCH_MAX}-${VGCONF_OS})])
	;;
     amd64-linux)
        valt_load_address_sec_norml="0xUNSET"
        valt_load_address_sec_inner="0xUNSET"
	if test x$vg_cv_only64bit = xyes; then
           VGCONF_ARCH_PRI="amd64"
           VGCONF_ARCH_SEC=""
	   VGCONF_PLATFORM_PRI_CAPS="AMD64_LINUX"
	   VGCONF_PLATFORM_SEC_CAPS=""
           valt_load_address_pri_norml="0x38000000"
           valt_load_address_pri_inner="0x28000000"
	elif test x$vg_cv_only32bit = xyes; then
	   VGCONF_ARCH_PRI="x86"
           VGCONF_ARCH_SEC=""
	   VGCONF_PLATFORM_PRI_CAPS="X86_LINUX"
	   VGCONF_PLATFORM_SEC_CAPS=""
           valt_load_address_pri_norml="0x38000000"
           valt_load_address_pri_inner="0x28000000"
	else
           VGCONF_ARCH_PRI="amd64"
           VGCONF_ARCH_SEC="x86"
	   VGCONF_PLATFORM_PRI_CAPS="AMD64_LINUX"
	   VGCONF_PLATFORM_SEC_CAPS="X86_LINUX"
           valt_load_address_pri_norml="0x38000000"
           valt_load_address_pri_inner="0x28000000"
           valt_load_address_sec_norml="0x38000000"
           valt_load_address_sec_inner="0x28000000"
	fi
        AC_MSG_RESULT([ok (${ARCH_MAX}-${VGCONF_OS})])
	;;
     ppc32-linux)
        VGCONF_ARCH_PRI="ppc32"
        VGCONF_ARCH_SEC=""
	VGCONF_PLATFORM_PRI_CAPS="PPC32_LINUX"
	VGCONF_PLATFORM_SEC_CAPS=""
        valt_load_address_pri_norml="0x38000000"
        valt_load_address_pri_inner="0x28000000"
        valt_load_address_sec_norml="0xUNSET"
        valt_load_address_sec_inner="0xUNSET"
        AC_MSG_RESULT([ok (${ARCH_MAX}-${VGCONF_OS})])
	;;
     ppc64-linux)
        valt_load_address_sec_norml="0xUNSET"
        valt_load_address_sec_inner="0xUNSET"
	if test x$vg_cv_only64bit = xyes; then
	   VGCONF_ARCH_PRI="ppc64"
           VGCONF_ARCH_SEC=""
	   VGCONF_PLATFORM_PRI_CAPS="PPC64_LINUX"
	   VGCONF_PLATFORM_SEC_CAPS=""
           valt_load_address_pri_norml="0x38000000"
           valt_load_address_pri_inner="0x28000000"
	elif test x$vg_cv_only32bit = xyes; then
	   VGCONF_ARCH_PRI="ppc32"
           VGCONF_ARCH_SEC=""
	   VGCONF_PLATFORM_PRI_CAPS="PPC32_LINUX"
	   VGCONF_PLATFORM_SEC_CAPS=""
           valt_load_address_pri_norml="0x38000000"
           valt_load_address_pri_inner="0x28000000"
	else
	   VGCONF_ARCH_PRI="ppc64"
           VGCONF_ARCH_SEC="ppc32"
	   VGCONF_PLATFORM_PRI_CAPS="PPC64_LINUX"
	   VGCONF_PLATFORM_SEC_CAPS="PPC32_LINUX"
           valt_load_address_pri_norml="0x38000000"
           valt_load_address_pri_inner="0x28000000"
           valt_load_address_sec_norml="0x38000000"
           valt_load_address_sec_inner="0x28000000"
	fi
        AC_MSG_RESULT([ok (${ARCH_MAX}-${VGCONF_OS})])
	;;
     # Darwin gets identified as 32-bit even when it supports 64-bit.
     # (Not sure why, possibly because 'uname' returns "i386"?)  Just about
     # all Macs support both 32-bit and 64-bit, so we just build both.  If
     # someone has a really old 32-bit only machine they can (hopefully?)
     # build with --enable-only32bit.  See bug 243362.
     x86-darwin|amd64-darwin)
        ARCH_MAX="amd64"
        valt_load_address_sec_norml="0xUNSET"
        valt_load_address_sec_inner="0xUNSET"
	if test x$vg_cv_only64bit = xyes; then
           VGCONF_ARCH_PRI="amd64"
           VGCONF_ARCH_SEC=""
	   VGCONF_PLATFORM_PRI_CAPS="AMD64_DARWIN"
	   VGCONF_PLATFORM_SEC_CAPS=""
           valt_load_address_pri_norml="0x138000000"
           valt_load_address_pri_inner="0x128000000"
	elif test x$vg_cv_only32bit = xyes; then
           VGCONF_ARCH_PRI="x86"
           VGCONF_ARCH_SEC=""
	   VGCONF_PLATFORM_PRI_CAPS="X86_DARWIN"
	   VGCONF_PLATFORM_SEC_CAPS=""
	   VGCONF_ARCH_PRI_CAPS="x86"
           valt_load_address_pri_norml="0x38000000"
           valt_load_address_pri_inner="0x28000000"
	else
           VGCONF_ARCH_PRI="amd64"
           VGCONF_ARCH_SEC="x86"
	   VGCONF_PLATFORM_PRI_CAPS="AMD64_DARWIN"
	   VGCONF_PLATFORM_SEC_CAPS="X86_DARWIN"
           valt_load_address_pri_norml="0x138000000"
           valt_load_address_pri_inner="0x128000000"
           valt_load_address_sec_norml="0x38000000"
           valt_load_address_sec_inner="0x28000000"
	fi
        AC_MSG_RESULT([ok (${ARCH_MAX}-${VGCONF_OS})])
	;;
     arm-linux) 
	VGCONF_ARCH_PRI="arm"
	VGCONF_PLATFORM_PRI_CAPS="ARM_LINUX"
	VGCONF_PLATFORM_SEC_CAPS=""
	valt_load_address_pri_norml="0x38000000"
	valt_load_address_pri_inner="0x28000000"
        valt_load_address_sec_norml="0xUNSET"
        valt_load_address_sec_inner="0xUNSET"
	AC_MSG_RESULT([ok (${host_cpu}-${host_os})])
	;;
     s390x-linux)
        VGCONF_ARCH_PRI="s390x"
        VGCONF_ARCH_SEC=""
        VGCONF_PLATFORM_PRI_CAPS="S390X_LINUX"
        VGCONF_PLATFORM_SEC_CAPS=""
        # we want to have the generated code close to the dispatcher
        valt_load_address_pri_norml="0x401000000"
        valt_load_address_pri_inner="0x410000000"
        valt_load_address_sec_norml="0xUNSET"
        valt_load_address_sec_inner="0xUNSET"
        AC_MSG_RESULT([ok (${ARCH_MAX}-${VGCONF_OS})])
        ;;
    *)
        VGCONF_ARCH_PRI="unknown"
        VGCONF_ARCH_SEC="unknown"
	VGCONF_PLATFORM_PRI_CAPS="UNKNOWN"
	VGCONF_PLATFORM_SEC_CAPS="UNKNOWN"
        valt_load_address_pri_norml="0xUNSET"
        valt_load_address_pri_inner="0xUNSET"
        valt_load_address_sec_norml="0xUNSET"
        valt_load_address_sec_inner="0xUNSET"
        AC_MSG_RESULT([no (${ARCH_MAX}-${VGCONF_OS})])
        AC_MSG_ERROR([Valgrind is platform specific. Sorry. Please consider doing a port.])
        ;;
esac

#----------------------------------------------------------------------------

# Set up VGCONF_ARCHS_INCLUDE_<arch>.  Either one or two of these become
# defined.
AM_CONDITIONAL(VGCONF_ARCHS_INCLUDE_X86,   
               test x$VGCONF_PLATFORM_PRI_CAPS = xX86_LINUX \
                 -o x$VGCONF_PLATFORM_SEC_CAPS = xX86_LINUX \
                 -o x$VGCONF_PLATFORM_PRI_CAPS = xX86_DARWIN \
                 -o x$VGCONF_PLATFORM_SEC_CAPS = xX86_DARWIN )
AM_CONDITIONAL(VGCONF_ARCHS_INCLUDE_AMD64, 
               test x$VGCONF_PLATFORM_PRI_CAPS = xAMD64_LINUX \
                 -o x$VGCONF_PLATFORM_PRI_CAPS = xAMD64_DARWIN )
AM_CONDITIONAL(VGCONF_ARCHS_INCLUDE_PPC32, 
               test x$VGCONF_PLATFORM_PRI_CAPS = xPPC32_LINUX \ 
                 -o x$VGCONF_PLATFORM_SEC_CAPS = xPPC32_LINUX )
AM_CONDITIONAL(VGCONF_ARCHS_INCLUDE_PPC64, 
               test x$VGCONF_PLATFORM_PRI_CAPS = xPPC64_LINUX )
AM_CONDITIONAL(VGCONF_ARCHS_INCLUDE_ARM,   
               test x$VGCONF_PLATFORM_PRI_CAPS = xARM_LINUX )
AM_CONDITIONAL(VGCONF_ARCHS_INCLUDE_S390X,
               test x$VGCONF_PLATFORM_PRI_CAPS = xS390X_LINUX )

# Set up VGCONF_PLATFORMS_INCLUDE_<platform>.  Either one or two of these
# become defined.
AM_CONDITIONAL(VGCONF_PLATFORMS_INCLUDE_X86_LINUX,   
               test x$VGCONF_PLATFORM_PRI_CAPS = xX86_LINUX \
                 -o x$VGCONF_PLATFORM_SEC_CAPS = xX86_LINUX)
AM_CONDITIONAL(VGCONF_PLATFORMS_INCLUDE_AMD64_LINUX, 
               test x$VGCONF_PLATFORM_PRI_CAPS = xAMD64_LINUX)
AM_CONDITIONAL(VGCONF_PLATFORMS_INCLUDE_PPC32_LINUX, 
               test x$VGCONF_PLATFORM_PRI_CAPS = xPPC32_LINUX \ 
                 -o x$VGCONF_PLATFORM_SEC_CAPS = xPPC32_LINUX)
AM_CONDITIONAL(VGCONF_PLATFORMS_INCLUDE_PPC64_LINUX, 
               test x$VGCONF_PLATFORM_PRI_CAPS = xPPC64_LINUX)
AM_CONDITIONAL(VGCONF_PLATFORMS_INCLUDE_ARM_LINUX, 
               test x$VGCONF_PLATFORM_PRI_CAPS = xARM_LINUX)
AM_CONDITIONAL(VGCONF_PLATFORMS_INCLUDE_S390X_LINUX,
               test x$VGCONF_PLATFORM_PRI_CAPS = xS390X_LINUX \
                 -o x$VGCONF_PLATFORM_SEC_CAPS = xS390X_LINUX)

AM_CONDITIONAL(VGCONF_PLATFORMS_INCLUDE_X86_DARWIN,   
               test x$VGCONF_PLATFORM_PRI_CAPS = xX86_DARWIN \
                 -o x$VGCONF_PLATFORM_SEC_CAPS = xX86_DARWIN)
AM_CONDITIONAL(VGCONF_PLATFORMS_INCLUDE_AMD64_DARWIN, 
               test x$VGCONF_PLATFORM_PRI_CAPS = xAMD64_DARWIN)


# Similarly, set up VGCONF_OS_IS_<os>.  Exactly one of these becomes defined.
# Relies on the assumption that the primary and secondary targets are 
# for the same OS, so therefore only necessary to test the primary.
AM_CONDITIONAL(VGCONF_OS_IS_LINUX,
               test x$VGCONF_PLATFORM_PRI_CAPS = xX86_LINUX \
                 -o x$VGCONF_PLATFORM_PRI_CAPS = xAMD64_LINUX \
                 -o x$VGCONF_PLATFORM_PRI_CAPS = xPPC32_LINUX \
                 -o x$VGCONF_PLATFORM_PRI_CAPS = xPPC64_LINUX \
                 -o x$VGCONF_PLATFORM_PRI_CAPS = xARM_LINUX \
                 -o x$VGCONF_PLATFORM_PRI_CAPS = xS390X_LINUX)
AM_CONDITIONAL(VGCONF_OS_IS_DARWIN,
               test x$VGCONF_PLATFORM_PRI_CAPS = xX86_DARWIN \
                 -o x$VGCONF_PLATFORM_PRI_CAPS = xAMD64_DARWIN)


# Sometimes, in the Makefile.am files, it's useful to know whether or not
# there is a secondary target.
AM_CONDITIONAL(VGCONF_HAVE_PLATFORM_SEC,
               test x$VGCONF_PLATFORM_SEC_CAPS != x)


#----------------------------------------------------------------------------
# Inner Valgrind?
#----------------------------------------------------------------------------

# Check if this should be built as an inner Valgrind, to be run within
# another Valgrind.  Choose the load address accordingly.
AC_SUBST(VALT_LOAD_ADDRESS_PRI)
AC_SUBST(VALT_LOAD_ADDRESS_SEC)
AC_CACHE_CHECK([for use as an inner Valgrind], vg_cv_inner,
   [AC_ARG_ENABLE(inner, 
      [  --enable-inner          enables self-hosting],
      [vg_cv_inner=$enableval],
      [vg_cv_inner=no])])
if test "$vg_cv_inner" = yes; then
    AC_DEFINE([ENABLE_INNER], 1, [configured to run as an inner Valgrind])
    VALT_LOAD_ADDRESS_PRI=$valt_load_address_pri_inner
    VALT_LOAD_ADDRESS_SEC=$valt_load_address_sec_inner
else
    VALT_LOAD_ADDRESS_PRI=$valt_load_address_pri_norml
    VALT_LOAD_ADDRESS_SEC=$valt_load_address_sec_norml
fi


#----------------------------------------------------------------------------
# Extra fine-tuning of installation directories
#----------------------------------------------------------------------------
AC_ARG_WITH(tmpdir,
   [  --with-tmpdir=PATH      Specify path for temporary files],
   tmpdir="$withval",
   tmpdir="/tmp")
AC_DEFINE_UNQUOTED(VG_TMPDIR, "$tmpdir", [Temporary files directory])


#----------------------------------------------------------------------------
# Libc and suppressions
#----------------------------------------------------------------------------
# This variable will collect the suppression files to be used.
AC_SUBST(DEFAULT_SUPP)

AC_CHECK_HEADER([features.h])

if test x$ac_cv_header_features_h = xyes; then
  rm -f conftest.$ac_ext
  cat <<_ACEOF >conftest.$ac_ext
#include <features.h>
#if defined(__GNU_LIBRARY__) && defined(__GLIBC__) && defined(__GLIBC_MINOR__)
glibc version is: __GLIBC__ __GLIBC_MINOR__
#endif
_ACEOF
  GLIBC_VERSION="`$CPP conftest.$ac_ext | $SED -n 's/^glibc version is: //p' | $SED 's/ /./g'`"
fi

# not really a version check
AC_EGREP_CPP([DARWIN_LIBC], [
#include <sys/cdefs.h>
#if defined(__DARWIN_VERS_1050)
  DARWIN_LIBC
#endif
],
GLIBC_VERSION="darwin")

# not really a version check
AC_EGREP_CPP([BIONIC_LIBC], [
#if defined(__ANDROID__)
  BIONIC_LIBC
#endif
],
GLIBC_VERSION="bionic")


AC_MSG_CHECKING([the GLIBC_VERSION version])

case "${GLIBC_VERSION}" in
     2.2)
	AC_MSG_RESULT(2.2 family)
	AC_DEFINE([GLIBC_2_2], 1, [Define to 1 if you're using glibc 2.2.x])
	DEFAULT_SUPP="glibc-2.2.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.2-LinuxThreads-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;

     2.3)
	AC_MSG_RESULT(2.3 family)
	AC_DEFINE([GLIBC_2_3], 1, [Define to 1 if you're using glibc 2.3.x])
	DEFAULT_SUPP="glibc-2.3.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;

     2.4)
	AC_MSG_RESULT(2.4 family)
	AC_DEFINE([GLIBC_2_4], 1, [Define to 1 if you're using glibc 2.4.x])
	DEFAULT_SUPP="glibc-2.4.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;

     2.5)
	AC_MSG_RESULT(2.5 family)
	AC_DEFINE([GLIBC_2_5], 1, [Define to 1 if you're using glibc 2.5.x])
	DEFAULT_SUPP="glibc-2.5.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;
     2.6)
	AC_MSG_RESULT(2.6 family)
	AC_DEFINE([GLIBC_2_6], 1, [Define to 1 if you're using glibc 2.6.x])
	DEFAULT_SUPP="glibc-2.6.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;
     2.7)
	AC_MSG_RESULT(2.7 family)
	AC_DEFINE([GLIBC_2_7], 1, [Define to 1 if you're using glibc 2.7.x])
	DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;
     2.8)
	AC_MSG_RESULT(2.8 family)
	AC_DEFINE([GLIBC_2_8], 1, [Define to 1 if you're using glibc 2.8.x])
	DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;
     2.9)
	AC_MSG_RESULT(2.9 family)
	AC_DEFINE([GLIBC_2_9], 1, [Define to 1 if you're using glibc 2.9.x])
	DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;
     2.10)
	AC_MSG_RESULT(2.10 family)
	AC_DEFINE([GLIBC_2_10], 1, [Define to 1 if you're using glibc 2.10.x])
	DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;
     2.11)
	AC_MSG_RESULT(2.11 family)
	AC_DEFINE([GLIBC_2_11], 1, [Define to 1 if you're using glibc 2.11.x])
	DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
        ;;
     2.12)
	AC_MSG_RESULT(2.12 family)
	AC_DEFINE([GLIBC_2_12], 1, [Define to 1 if you're using glibc 2.12.x])
	DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;
     2.13)
	AC_MSG_RESULT(2.13 family)
	AC_DEFINE([GLIBC_2_13], 1, [Define to 1 if you're using glibc 2.13.x])
	DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;
     2.14)
	AC_MSG_RESULT(2.14 family)
	AC_DEFINE([GLIBC_2_14], 1, [Define to 1 if you're using glibc 2.14.x])
	DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}"
	DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}"
	;;
     darwin)
	AC_MSG_RESULT(Darwin)
	AC_DEFINE([DARWIN_LIBC], 1, [Define to 1 if you're using Darwin])
	# DEFAULT_SUPP set by kernel version check above.
	;;
     bionic)
	AC_MSG_RESULT(Bionic)
	AC_DEFINE([BIONIC_LIBC], 1, [Define to 1 if you're using Bionic])
	DEFAULT_SUPP="bionic.supp ${DEFAULT_SUPP}"
	;;

     *)
	AC_MSG_RESULT([unsupported version ${GLIBC_VERSION}])
	AC_MSG_ERROR([Valgrind requires glibc version 2.2 - 2.14])
	AC_MSG_ERROR([or Darwin libc])
	;;
esac

AC_SUBST(GLIBC_VERSION)


# Add default suppressions for the X client libraries.  Make no
# attempt to detect whether such libraries are installed on the
# build machine (or even if any X facilities are present); just
# add the suppressions antidisirregardless.
DEFAULT_SUPP="xfree-4.supp ${DEFAULT_SUPP}"
DEFAULT_SUPP="xfree-3.supp ${DEFAULT_SUPP}"

# Add glibc and X11 suppressions for exp-sgcheck
DEFAULT_SUPP="exp-sgcheck.supp ${DEFAULT_SUPP}"


#----------------------------------------------------------------------------
# Platform variants?
#----------------------------------------------------------------------------

# Normally the PLAT = (ARCH, OS) characterisation of the platform is enough.
# But there are times where we need a bit more control.  The motivating
# and currently only case is Android: this is almost identical to arm-linux,
# but not quite.  So this introduces the concept of platform variant tags,
# which get passed in the compile as -DVGPV_<arch>_<os>_<variant> along
# with the main -DVGP_<arch>_<os> definition.
#
# In almost all cases, the <variant> bit is "vanilla".  But for Android
# it is "android" instead.
#
# Consequently (eg), plain arm-linux would build with
#
#   -DVGP_arm_linux -DVGPV_arm_linux_vanilla
#
# whilst an Android build would have
#
#   -DVGP_arm_linux -DVGPV_arm_linux_android
#
# The setup of the platform variant is pushed relatively far down this
# file in order that we can inspect any of the variables set above.

# In the normal case ..
VGCONF_PLATVARIANT="vanilla"

# Android on ARM ?
if test "$VGCONF_ARCH_PRI-$VGCONF_OS" = "arm-linux" \
        -a "$GLIBC_VERSION" = "bionic";
then
   VGCONF_PLATVARIANT="android"
fi

AC_SUBST(VGCONF_PLATVARIANT)


# FIXME: do we also want to define automake variables
# VGCONF_PLATVARIANT_IS_<WHATEVER>, where WHATEVER is (currently)
# VANILLA or ANDROID ?  This would be in the style of VGCONF_ARCHS_INCLUDE,
# VGCONF_PLATFORMS_INCLUDE and VGCONF_OS_IS above?  Could easily enough
# do that.  Problem is that we can't do and-ing in Makefile.am's, but
# that's what we'd need to do to use this, since what we'd want to write
# is something like
#
# VGCONF_PLATFORMS_INCLUDE_ARM_LINUX && VGCONF_PLATVARIANT_IS_ANDROID
#
# Hmm.  Can't think of a nice clean solution to this.

AM_CONDITIONAL(VGCONF_PLATVARIANT_IS_VANILLA,
               test x$VGCONF_PLATVARIANT = xvanilla)
AM_CONDITIONAL(VGCONF_PLATVARIANT_IS_ANDROID,
               test x$VGCONF_PLATVARIANT = xandroid)


#----------------------------------------------------------------------------
# Checking for various library functions and other definitions
#----------------------------------------------------------------------------

# Check for CLOCK_MONOTONIC

AC_MSG_CHECKING([for CLOCK_MONOTONIC])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <time.h>
]], [[
  struct timespec t;
  clock_gettime(CLOCK_MONOTONIC, &t);
  return 0;
]])], [
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_CLOCK_MONOTONIC], 1,
          [Define to 1 if you have the `CLOCK_MONOTONIC' constant.])
], [
AC_MSG_RESULT([no])
])


# Check for PTHREAD_RWLOCK_T

AC_MSG_CHECKING([for pthread_rwlock_t])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#define _GNU_SOURCE
#include <pthread.h>
]], [[
  pthread_rwlock_t rwl;
]])], [
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_PTHREAD_RWLOCK_T], 1,
          [Define to 1 if you have the `pthread_rwlock_t' type.])
], [
AC_MSG_RESULT([no])
])


# Check for PTHREAD_MUTEX_ADAPTIVE_NP

AC_MSG_CHECKING([for PTHREAD_MUTEX_ADAPTIVE_NP])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#define _GNU_SOURCE
#include <pthread.h>
]], [[
  return (PTHREAD_MUTEX_ADAPTIVE_NP);
]])], [
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_PTHREAD_MUTEX_ADAPTIVE_NP], 1,
          [Define to 1 if you have the `PTHREAD_MUTEX_ADAPTIVE_NP' constant.])
], [
AC_MSG_RESULT([no])
])


# Check for PTHREAD_MUTEX_ERRORCHECK_NP

AC_MSG_CHECKING([for PTHREAD_MUTEX_ERRORCHECK_NP])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#define _GNU_SOURCE
#include <pthread.h>
]], [[
  return (PTHREAD_MUTEX_ERRORCHECK_NP);
]])], [
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_PTHREAD_MUTEX_ERRORCHECK_NP], 1,
          [Define to 1 if you have the `PTHREAD_MUTEX_ERRORCHECK_NP' constant.])
], [
AC_MSG_RESULT([no])
])


# Check for PTHREAD_MUTEX_RECURSIVE_NP

AC_MSG_CHECKING([for PTHREAD_MUTEX_RECURSIVE_NP])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#define _GNU_SOURCE
#include <pthread.h>
]], [[
  return (PTHREAD_MUTEX_RECURSIVE_NP);
]])], [
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_PTHREAD_MUTEX_RECURSIVE_NP], 1,
          [Define to 1 if you have the `PTHREAD_MUTEX_RECURSIVE_NP' constant.])
], [
AC_MSG_RESULT([no])
])


# Check for PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP

AC_MSG_CHECKING([for PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#define _GNU_SOURCE
#include <pthread.h>
]], [[
  pthread_mutex_t m = PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP;
  return 0;
]])], [
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP], 1,
          [Define to 1 if you have the `PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP' constant.])
], [
AC_MSG_RESULT([no])
])


# Check whether pthread_mutex_t has a member called __m_kind.

AC_CHECK_MEMBER([pthread_mutex_t.__m_kind],
	        [AC_DEFINE([HAVE_PTHREAD_MUTEX_T__M_KIND],
		           1,                                   
			   [Define to 1 if pthread_mutex_t has a member called __m_kind.])
                ],
		[],
		[#include <pthread.h>])


# Check whether pthread_mutex_t has a member called __data.__kind.

AC_CHECK_MEMBER([pthread_mutex_t.__data.__kind],
                [AC_DEFINE([HAVE_PTHREAD_MUTEX_T__DATA__KIND],
		          1,
			  [Define to 1 if pthread_mutex_t has a member __data.__kind.])
                ],
		[],
		[#include <pthread.h>])


# does this compiler support -maltivec and does it have the include file
# <altivec.h> ?

AC_MSG_CHECKING([for Altivec])

safe_CFLAGS=$CFLAGS
CFLAGS="-maltivec"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <altivec.h>
]], [[
  vector unsigned int v;
]])], [
ac_have_altivec=yes
AC_MSG_RESULT([yes])
AC_DEFINE([HAS_ALTIVEC], 1,
          [Define to 1 if gcc/as can do Altivec.])
], [
ac_have_altivec=no
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AM_CONDITIONAL([HAS_ALTIVEC], [test x$ac_have_altivec = xyes])


# Check that both: the compiler supports -mvsx and that the assembler
# understands VSX instructions.  If either of those doesn't work,
# conclude that we can't do VSX.  NOTE: basically this is a kludge
# in that it conflates two things that should be separate -- whether
# the compiler understands the flag vs whether the assembler 
# understands the opcodes.  This really ought to be cleaned up
# and done properly, like it is for x86/x86_64.

AC_MSG_CHECKING([for VSX])

safe_CFLAGS=$CFLAGS
CFLAGS="-mvsx"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <altivec.h>
]], [[
  vector unsigned int v;
  __asm__ __volatile__("xsmaddadp 32, 32, 33" ::: "memory","cc");
]])], [
ac_have_vsx=yes
AC_MSG_RESULT([yes])
], [
ac_have_vsx=no
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AM_CONDITIONAL(HAS_VSX, test x$ac_have_vsx = xyes)


# Check for pthread_create@GLIBC2.0
AC_MSG_CHECKING([for pthread_create@GLIBC2.0()])

safe_CFLAGS=$CFLAGS
CFLAGS="-lpthread"
AC_LINK_IFELSE([AC_LANG_PROGRAM([[
extern int pthread_create_glibc_2_0(void*, const void*,
                                    void *(*)(void*), void*);
__asm__(".symver pthread_create_glibc_2_0, pthread_create@GLIBC_2.0");
]], [[
#ifdef __powerpc__
/*
 * Apparently on PowerPC linking this program succeeds and generates an
 * executable with the undefined symbol pthread_create@GLIBC_2.0.
 */
#error This test does not work properly on PowerPC.
#else
  pthread_create_glibc_2_0(0, 0, 0, 0);
#endif
  return 0;
]])], [
ac_have_pthread_create_glibc_2_0=yes
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_PTHREAD_CREATE_GLIBC_2_0], 1,
          [Define to 1 if you have the `pthread_create@glibc2.0' function.])
], [
ac_have_pthread_create_glibc_2_0=no
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AM_CONDITIONAL(HAVE_PTHREAD_CREATE_GLIBC_2_0,
	       test x$ac_have_pthread_create_glibc_2_0 = xyes)


# Check for eventfd_t, eventfd() and eventfd_read()
AC_MSG_CHECKING([for eventfd()])

AC_LINK_IFELSE([AC_LANG_PROGRAM([[
#include <sys/eventfd.h>
]], [[
  eventfd_t ev;
  int fd;

  fd = eventfd(5, 0);
  eventfd_read(fd, &ev);
  return 0;
]])], [
AC_MSG_RESULT([yes])
AC_DEFINE([HAVE_EVENTFD], 1,
          [Define to 1 if you have the `eventfd' function.])
AC_DEFINE([HAVE_EVENTFD_READ], 1,
          [Define to 1 if you have the `eventfd_read' function.])
], [
AC_MSG_RESULT([no])
])


#----------------------------------------------------------------------------
# Checking for supported compiler flags.
#----------------------------------------------------------------------------

# does this compiler support -m32 ?
AC_MSG_CHECKING([if gcc accepts -m32])

safe_CFLAGS=$CFLAGS
CFLAGS="-m32"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  return 0;
]])], [
FLAG_M32="-m32"
AC_MSG_RESULT([yes])
], [
FLAG_M32=""
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AC_SUBST(FLAG_M32)


# does this compiler support -m64 ?
AC_MSG_CHECKING([if gcc accepts -m64])

safe_CFLAGS=$CFLAGS
CFLAGS="-m64"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  return 0;
]])], [
FLAG_M64="-m64"
AC_MSG_RESULT([yes])
], [
FLAG_M64=""
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AC_SUBST(FLAG_M64)


# does this compiler support -mmmx ?
AC_MSG_CHECKING([if gcc accepts -mmmx])

safe_CFLAGS=$CFLAGS
CFLAGS="-mmmx"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  return 0;
]])], [
FLAG_MMMX="-mmmx"
AC_MSG_RESULT([yes])
], [
FLAG_MMMX=""
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AC_SUBST(FLAG_MMMX)


# does this compiler support -msse ?
AC_MSG_CHECKING([if gcc accepts -msse])

safe_CFLAGS=$CFLAGS
CFLAGS="-msse"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  return 0;
]])], [
FLAG_MSSE="-msse"
AC_MSG_RESULT([yes])
], [
FLAG_MSSE=""
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AC_SUBST(FLAG_MSSE)


# does this compiler support -mpreferred-stack-boundary=2 ?
AC_MSG_CHECKING([if gcc accepts -mpreferred-stack-boundary])

safe_CFLAGS=$CFLAGS
CFLAGS="-mpreferred-stack-boundary=2"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  return 0;
]])], [
PREFERRED_STACK_BOUNDARY="-mpreferred-stack-boundary=2"
AC_MSG_RESULT([yes])
], [
PREFERRED_STACK_BOUNDARY=""
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AC_SUBST(PREFERRED_STACK_BOUNDARY)


# does this compiler support -Wno-pointer-sign ?
AC_MSG_CHECKING([if gcc accepts -Wno-pointer-sign])

safe_CFLAGS=$CFLAGS
CFLAGS="-Wno-pointer-sign"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  return 0;
]])], [
no_pointer_sign=yes
AC_MSG_RESULT([yes])
], [
no_pointer_sign=no
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

if test x$no_pointer_sign = xyes; then
  CFLAGS="$CFLAGS -Wno-pointer-sign"
fi


# does this compiler support -Wno-empty-body ?

AC_MSG_CHECKING([if gcc accepts -Wno-empty-body])

safe_CFLAGS=$CFLAGS
CFLAGS="-Wno-empty-body"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[
  return 0;
]])], [
AC_SUBST([FLAG_W_NO_EMPTY_BODY], [-Wno-empty-body])
AC_MSG_RESULT([yes])
], [
AC_SUBST([FLAG_W_NO_EMPTY_BODY], [])
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS


# does this compiler support -Wno-format-zero-length ?

AC_MSG_CHECKING([if gcc accepts -Wno-format-zero-length])

safe_CFLAGS=$CFLAGS
CFLAGS="-Wno-format-zero-length"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[
  return 0;
]])], [
AC_SUBST([FLAG_W_NO_FORMAT_ZERO_LENGTH], [-Wno-format-zero-length])
AC_MSG_RESULT([yes])
], [
AC_SUBST([FLAG_W_NO_FORMAT_ZERO_LENGTH], [])
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS


# does this compiler support -Wno-nonnull ?

AC_MSG_CHECKING([if gcc accepts -Wno-nonnull])

safe_CFLAGS=$CFLAGS
CFLAGS="-Wno-nonnull"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[
  return 0;
]])], [
AC_SUBST([FLAG_W_NO_NONNULL], [-Wno-nonnull])
AC_MSG_RESULT([yes])
], [
AC_SUBST([FLAG_W_NO_NONNULL], [])
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS


# does this compiler support -Wno-overflow ?

AC_MSG_CHECKING([if gcc accepts -Wno-overflow])

safe_CFLAGS=$CFLAGS
CFLAGS="-Wno-overflow"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[
  return 0;
]])], [
AC_SUBST([FLAG_W_NO_OVERFLOW], [-Wno-overflow])
AC_MSG_RESULT([yes])
], [
AC_SUBST([FLAG_W_NO_OVERFLOW], [])
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS


# does this compiler support -Wno-uninitialized ?

AC_MSG_CHECKING([if gcc accepts -Wno-uninitialized])

safe_CFLAGS=$CFLAGS
CFLAGS="-Wno-uninitialized"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[
  return 0;
]])], [
AC_SUBST([FLAG_W_NO_UNINITIALIZED], [-Wno-uninitialized])
AC_MSG_RESULT([yes])
], [
AC_SUBST([FLAG_W_NO_UNINITIALIZED], [])
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS


# does this compiler support -Wextra or the older -W ?

AC_MSG_CHECKING([if gcc accepts -Wextra or -W])

safe_CFLAGS=$CFLAGS
CFLAGS="-Wextra"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[
  return 0;
]])], [
AC_SUBST([FLAG_W_EXTRA], [-Wextra])
AC_MSG_RESULT([-Wextra])
], [
  CFLAGS="-W"
  AC_COMPILE_IFELSE(AC_LANG_PROGRAM([[ ]], [[
    return 0;
  ]]), [
  AC_SUBST([FLAG_W_EXTRA], [-W])
  AC_MSG_RESULT([-W])
  ], [
  AC_SUBST([FLAG_W_EXTRA], [])
  AC_MSG_RESULT([not supported])
  ])
])
CFLAGS=$safe_CFLAGS


# does this compiler support -fno-stack-protector ?
AC_MSG_CHECKING([if gcc accepts -fno-stack-protector])

safe_CFLAGS=$CFLAGS
CFLAGS="-fno-stack-protector"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  return 0;
]])], [
no_stack_protector=yes
FLAG_FNO_STACK_PROTECTOR="-fno-stack-protector"
AC_MSG_RESULT([yes])
], [
no_stack_protector=no
FLAG_FNO_STACK_PROTECTOR=""
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AC_SUBST(FLAG_FNO_STACK_PROTECTOR)

if test x$no_stack_protector = xyes; then
  CFLAGS="$CFLAGS -fno-stack-protector"
fi


# does this compiler support --param inline-unit-growth=... ?

AC_MSG_CHECKING([if gcc accepts --param inline-unit-growth])

safe_CFLAGS=$CFLAGS
CFLAGS="--param inline-unit-growth=900"

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[ ]], [[
  return 0;
]])], [
AC_SUBST([FLAG_UNLIMITED_INLINE_UNIT_GROWTH],
         ["--param inline-unit-growth=900"])
AC_MSG_RESULT([yes])
], [
AC_SUBST([FLAG_UNLIMITED_INLINE_UNIT_GROWTH], [""])
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS


# does the linker support -Wl,--build-id=none ?  Note, it's
# important that we test indirectly via whichever C compiler
# is selected, rather than testing /usr/bin/ld or whatever
# directly.

AC_MSG_CHECKING([if the linker accepts -Wl,--build-id=none])

safe_CFLAGS=$CFLAGS
CFLAGS="-Wl,--build-id=none"

AC_LINK_IFELSE(
[AC_LANG_PROGRAM([ ], [return 0;])],
[
  AC_SUBST([FLAG_NO_BUILD_ID], ["-Wl,--build-id=none"])
  AC_MSG_RESULT([yes])
], [
  AC_SUBST([FLAG_NO_BUILD_ID], [""])
  AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS


# does the ppc assembler support "mtocrf" et al?
AC_MSG_CHECKING([if ppc32/64 as supports mtocrf/mfocrf])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
__asm__ __volatile__("mtocrf 4,0");
__asm__ __volatile__("mfocrf 0,4");
]])], [
ac_have_as_ppc_mftocrf=yes
AC_MSG_RESULT([yes])
], [
ac_have_as_ppc_mftocrf=no
AC_MSG_RESULT([no])
])
if test x$ac_have_as_ppc_mftocrf = xyes ; then
  AC_DEFINE(HAVE_AS_PPC_MFTOCRF, 1, [Define to 1 if as supports mtocrf/mfocrf.])
fi


CFLAGS=$safe_CFLAGS

# does the x86/amd64 assembler understand SSE3 instructions?
# Note, this doesn't generate a C-level symbol.  It generates a
# automake-level symbol (BUILD_SSE3_TESTS), used in test Makefile.am's
AC_MSG_CHECKING([if x86/amd64 assembler speaks SSE3])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  do { long long int x; 
     __asm__ __volatile__("fisttpq (%0)" : :"r"(&x) ); } 
  while (0)
]])], [
ac_have_as_sse3=yes
AC_MSG_RESULT([yes])
], [
ac_have_as_sse3=no
AC_MSG_RESULT([no])
])

AM_CONDITIONAL(BUILD_SSE3_TESTS, test x$ac_have_as_sse3 = xyes)


# Ditto for SSSE3 instructions (note extra S)
# Note, this doesn't generate a C-level symbol.  It generates a
# automake-level symbol (BUILD_SSSE3_TESTS), used in test Makefile.am's
AC_MSG_CHECKING([if x86/amd64 assembler speaks SSSE3])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  do { long long int x; 
   __asm__ __volatile__(
      "pabsb (%0),%%xmm7" : : "r"(&x) : "xmm7" ); }
  while (0)
]])], [
ac_have_as_ssse3=yes
AC_MSG_RESULT([yes])
], [
ac_have_as_ssse3=no
AC_MSG_RESULT([no])
])

AM_CONDITIONAL(BUILD_SSSE3_TESTS, test x$ac_have_as_ssse3 = xyes)


# does the x86/amd64 assembler understand the PCLMULQDQ instruction?
# Note, this doesn't generate a C-level symbol.  It generates a
# automake-level symbol (BUILD_PCLMULQDQ_TESTS), used in test Makefile.am's
AC_MSG_CHECKING([if x86/amd64 assembler supports 'pclmulqdq'])
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  do {
   __asm__ __volatile__(
      "pclmulqdq \$17,%%xmm6,%%xmm7" : : : "xmm6", "xmm7" ); }
  while (0)
]])], [
ac_have_as_pclmulqdq=yes
AC_MSG_RESULT([yes])
], [
ac_have_as_pclmulqdq=no
AC_MSG_RESULT([no])
])

AM_CONDITIONAL(BUILD_PCLMULQDQ_TESTS, test x$ac_have_as_pclmulqdq = xyes)


# does the x86/amd64 assembler understand the LZCNT instruction?
# Note, this doesn't generate a C-level symbol.  It generates a
# automake-level symbol (BUILD_LZCNT_TESTS), used in test Makefile.am's
AC_MSG_CHECKING([if x86/amd64 assembler supports 'lzcnt'])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  do { 		 
      __asm__ __volatile__("lzcnt %rax,%rax");
  } while (0)
]])], [
  ac_have_as_lzcnt=yes
  AC_MSG_RESULT([yes])
], [
  ac_have_as_lzcnt=no
  AC_MSG_RESULT([no])
])

AM_CONDITIONAL([BUILD_LZCNT_TESTS], [test x$ac_have_as_lzcnt = xyes])


# does the x86/amd64 assembler understand SSE 4.2 instructions?
# Note, this doesn't generate a C-level symbol.  It generates a
# automake-level symbol (BUILD_SSE42_TESTS), used in test Makefile.am's
AC_MSG_CHECKING([if x86/amd64 assembler speaks SSE4.2])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
  do { long long int x; 
   __asm__ __volatile__(
      "crc32q %%r15,%%r15" : : : "r15" ); }
  while (0)
]])], [
ac_have_as_sse42=yes
AC_MSG_RESULT([yes])
], [
ac_have_as_sse42=no
AC_MSG_RESULT([no])
])

AM_CONDITIONAL(BUILD_SSE42_TESTS, test x$ac_have_as_sse42 = xyes)


# XXX JRS 2010 Oct 13: what is this for?  For sure, we don't need this
# when building the tool executables.  I think we should get rid of it.
#
# Check for TLS support in the compiler and linker
AC_LINK_IFELSE([AC_LANG_PROGRAM([[static __thread int foo;]],
                                [[return foo;]])],
                               [vg_cv_linktime_tls=yes],
                               [vg_cv_linktime_tls=no])
# Native compilation: check whether running a program using TLS succeeds.
# Linking only is not sufficient -- e.g. on Red Hat 7.3 linking TLS programs
# succeeds but running programs using TLS fails.
# Cross-compiling: check whether linking a program using TLS succeeds.
AC_CACHE_CHECK([for TLS support], vg_cv_tls,
	       [AC_ARG_ENABLE(tls, [  --enable-tls            platform supports TLS],
		[vg_cv_tls=$enableval],
               	[AC_RUN_IFELSE([AC_LANG_PROGRAM([[static __thread int foo;]],
                                                [[return foo;]])],
                               [vg_cv_tls=yes],
                               [vg_cv_tls=no],
                               [vg_cv_tls=$vg_cv_linktime_tls])])])

if test "$vg_cv_tls" = yes; then
AC_DEFINE([HAVE_TLS], 1, [can use __thread to define thread-local variables])
fi


#----------------------------------------------------------------------------
# Checks for C header files.
#----------------------------------------------------------------------------

AC_HEADER_STDC
AC_CHECK_HEADERS([       \
        asm/unistd.h     \
        endian.h         \
        mqueue.h         \
        sys/endian.h     \
        sys/epoll.h      \
        sys/eventfd.h    \
        sys/klog.h       \
        sys/poll.h       \
        sys/signal.h     \
        sys/signalfd.h   \
        sys/syscall.h    \
        sys/time.h       \
        sys/types.h      \
        ])

# Verify whether the <linux/futex.h> header is usable.
AC_MSG_CHECKING([if <linux/futex.h> is usable])

AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
#include <linux/futex.h>
]], [[
  return FUTEX_WAIT;
]])], [
AC_DEFINE([HAVE_USABLE_LINUX_FUTEX_H], 1,
          [Define to 1 if you have a usable <linux/futex.h> header file.])
AC_MSG_RESULT([yes])
], [
AC_MSG_RESULT([no])
])

#----------------------------------------------------------------------------
# Checks for typedefs, structures, and compiler characteristics.
#----------------------------------------------------------------------------
AC_TYPE_UID_T
AC_TYPE_OFF_T
AC_TYPE_SIZE_T
AC_HEADER_TIME


#----------------------------------------------------------------------------
# Checks for library functions.
#----------------------------------------------------------------------------
AC_FUNC_MEMCMP
AC_FUNC_MMAP

AC_CHECK_LIB([pthread], [pthread_create])
AC_CHECK_LIB([rt], [clock_gettime])

AC_CHECK_FUNCS([     \
        clock_gettime\
        epoll_create \
        epoll_pwait  \
        klogctl      \
        mallinfo     \
        memchr       \
        memset       \
        mkdir        \
        mremap       \
        ppoll        \
        pthread_barrier_init       \
        pthread_condattr_setclock  \
        pthread_mutex_timedlock    \
        pthread_rwlock_timedrdlock \
        pthread_rwlock_timedwrlock \
        pthread_spin_lock          \
        pthread_yield              \
        readlinkat   \
        semtimedop   \
        signalfd     \
        sigwaitinfo  \
        strchr       \
        strdup       \
        strpbrk      \
        strrchr      \
        strstr       \
        syscall      \
        utimensat    \
        ])

# AC_CHECK_LIB adds any library found to the variable LIBS, and links these
# libraries with any shared object and/or executable. This is NOT what we
# want for e.g. vgpreload_core-x86-linux.so
LIBS=""

AM_CONDITIONAL([HAVE_PTHREAD_BARRIER],
               [test x$ac_cv_func_pthread_barrier_init = xyes])
AM_CONDITIONAL([HAVE_PTHREAD_MUTEX_TIMEDLOCK],
               [test x$ac_cv_func_pthread_mutex_timedlock = xyes])
AM_CONDITIONAL([HAVE_PTHREAD_SPINLOCK],
               [test x$ac_cv_func_pthread_spin_lock = xyes])


#----------------------------------------------------------------------------
# MPI checks
#----------------------------------------------------------------------------
# Do we have a useable MPI setup on the primary and/or secondary targets?
# On Linux, by default, assumes mpicc and -m32/-m64
# Note: this is a kludge in that it assumes the specified mpicc 
# understands -m32/-m64 regardless of what is specified using
# --with-mpicc=.
MPI_CC="mpicc"

mflag_primary=
if test x$VGCONF_PLATFORM_PRI_CAPS = xX86_LINUX \
     -o x$VGCONF_PLATFORM_PRI_CAPS = xPPC32_LINUX \
     -o x$VGCONF_PLATFORM_PRI_CAPS = xARM_LINUX ; then
  mflag_primary=$FLAG_M32
elif test x$VGCONF_PLATFORM_PRI_CAPS = xAMD64_LINUX \
       -o x$VGCONF_PLATFORM_PRI_CAPS = xPPC64_LINUX \
       -o x$VGCONF_PLATFORM_PRI_CAPS = xS390X_LINUX ; then
  mflag_primary=$FLAG_M64
fi

mflag_secondary=
if test x$VGCONF_PLATFORM_SEC_CAPS = xX86_LINUX \
     -o x$VGCONF_PLATFORM_SEC_CAPS = xPPC32_LINUX ; then
  mflag_secondary=$FLAG_M32
fi


AC_ARG_WITH(mpicc,
   [  --with-mpicc=           Specify name of MPI2-ised C compiler],
   MPI_CC=$withval
)
AC_SUBST(MPI_CC)

## See if MPI_CC works for the primary target
##
AC_MSG_CHECKING([primary target for usable MPI2-compliant C compiler and mpi.h])
saved_CC=$CC
saved_CFLAGS=$CFLAGS
CC=$MPI_CC
CFLAGS=$mflag_primary
AC_LINK_IFELSE([AC_LANG_PROGRAM([[
#include <mpi.h>
#include <stdio.h>
]], [[
  int r = MPI_Init(NULL,NULL);
  r |= MPI_Type_get_contents( MPI_INT, 0,0,0, NULL,NULL,NULL );
  return r; 
]])], [
ac_have_mpi2_pri=yes
AC_MSG_RESULT([yes, $MPI_CC])
], [
ac_have_mpi2_pri=no
AC_MSG_RESULT([no])
])
CC=$saved_CC
CFLAGS=$saved_CFLAGS
AM_CONDITIONAL(BUILD_MPIWRAP_PRI, test x$ac_have_mpi2_pri = xyes)

## See if MPI_CC works for the secondary target.  Complication: what if
## there is no secondary target?  We need this to then fail.
## Kludge this by making MPI_CC something which will surely fail in
## such a case.
##
AC_MSG_CHECKING([secondary target for usable MPI2-compliant C compiler and mpi.h])
saved_CC=$CC
saved_CFLAGS=$CFLAGS
if test x$VGCONF_PLATFORM_SEC_CAPS = x ; then
  CC="$MPI_CC this will surely fail"
else
  CC=$MPI_CC
fi
CFLAGS=$mflag_secondary
AC_LINK_IFELSE([AC_LANG_PROGRAM([[
#include <mpi.h>
#include <stdio.h>
]], [[
  int r = MPI_Init(NULL,NULL);
  r |= MPI_Type_get_contents( MPI_INT, 0,0,0, NULL,NULL,NULL );
  return r; 
]])], [
ac_have_mpi2_sec=yes
AC_MSG_RESULT([yes, $MPI_CC])
], [
ac_have_mpi2_sec=no
AC_MSG_RESULT([no])
])
CC=$saved_CC
CFLAGS=$saved_CFLAGS
AM_CONDITIONAL(BUILD_MPIWRAP_SEC, test x$ac_have_mpi2_sec = xyes)


#----------------------------------------------------------------------------
# Other library checks
#----------------------------------------------------------------------------
# There now follow some tests for Boost, and OpenMP.  These
# tests are present because Drd has some regression tests that use
# these packages.  All regression test programs all compiled only
# for the primary target.  And so it is important that the configure
# checks that follow, use the correct -m32 or -m64 flag for the
# primary target (called $mflag_primary).  Otherwise, we can end up
# in a situation (eg) where, on amd64-linux, the test for Boost checks
# for usable 64-bit Boost facilities, but because we are doing a 32-bit
# only build (meaning, the primary target is x86-linux), the build
# of the regtest programs that use Boost fails, because they are 
# build as 32-bit (IN THIS EXAMPLE).
#
# Hence: ALWAYS USE $mflag_primary FOR CONFIGURE TESTS FOR FACILITIES
# NEEDED BY THE REGRESSION TEST PROGRAMS.


# Check whether the boost library 1.35 or later has been installed.
# The Boost.Threads library has undergone a major rewrite in version 1.35.0.

AC_MSG_CHECKING([for boost])

AC_LANG(C++)
safe_CXXFLAGS=$CXXFLAGS
CXXFLAGS="-lboost_thread-mt $mflag_primary"

AC_LINK_IFELSE([AC_LANG_SOURCE([
#include <boost/thread.hpp>
static void thread_func(void)
{ }
int main(int argc, char** argv)
{
  boost::thread t(thread_func);
  return 0;
}
])],
[
ac_have_boost_1_35=yes
AC_SUBST([BOOST_CFLAGS], [])
AC_SUBST([BOOST_LIBS], ["${CXXFLAGS}"])
AC_MSG_RESULT([yes])
], [
ac_have_boost_1_35=no
AC_MSG_RESULT([no])
])

CXXFLAGS=$safe_CXXFLAGS
AC_LANG(C)

AM_CONDITIONAL([HAVE_BOOST_1_35], [test x$ac_have_boost_1_35 = xyes])


# does this compiler support -fopenmp, does it have the include file
# <omp.h> and does it have libgomp ?

AC_MSG_CHECKING([for OpenMP])

safe_CFLAGS=$CFLAGS
CFLAGS="-fopenmp $mflag_primary"

AC_LINK_IFELSE([AC_LANG_SOURCE([
#include <omp.h> 
int main(int argc, char** argv)
{
  omp_set_dynamic(0);
  return 0;
}
])],
[
ac_have_openmp=yes
AC_MSG_RESULT([yes])
], [
ac_have_openmp=no
AC_MSG_RESULT([no])
])
CFLAGS=$safe_CFLAGS

AM_CONDITIONAL([HAVE_OPENMP], [test x$ac_have_openmp = xyes])


# does this compiler have built-in functions for atomic memory access ?
AC_MSG_CHECKING([if gcc supports __sync_bool_compare_and_swap])

safe_CFLAGS=$CFLAGS
CFLAGS="$mflag_primary"

AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[
  int variable = 1;
  return (__sync_bool_compare_and_swap(&variable, 1, 2)
          && __sync_add_and_fetch(&variable, 1) ? 1 : 0)
]])], [
  ac_have_builtin_atomic=yes
  AC_MSG_RESULT([yes])
  AC_DEFINE(HAVE_BUILTIN_ATOMIC, 1, [Define to 1 if gcc supports __sync_bool_compare_and_swap() and __sync_add_and_fetch()])
], [
  ac_have_builtin_atomic=no
  AC_MSG_RESULT([no])
])

CFLAGS=$safe_CFLAGS

AM_CONDITIONAL([HAVE_BUILTIN_ATOMIC], [test x$ac_have_builtin_atomic = xyes])

# does g++ have built-in functions for atomic memory access ?
AC_MSG_CHECKING([if g++ supports __sync_bool_compare_and_swap])

safe_CXXFLAGS=$CXXFLAGS
CXXFLAGS="$mflag_primary"

AC_LANG_PUSH(C++)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[
  int variable = 1;
  return (__sync_bool_compare_and_swap(&variable, 1, 2)
          && __sync_add_and_fetch(&variable, 1) ? 1 : 0)
]])], [
  ac_have_builtin_atomic_cxx=yes
  AC_MSG_RESULT([yes])
  AC_DEFINE(HAVE_BUILTIN_ATOMIC_CXX, 1, [Define to 1 if g++ supports __sync_bool_compare_and_swap() and __sync_add_and_fetch()])
], [
  ac_have_builtin_atomic_cxx=no
  AC_MSG_RESULT([no])
])
AC_LANG_POP(C++)

CXXFLAGS=$safe_CXXFLAGS

AM_CONDITIONAL([HAVE_BUILTIN_ATOMIC_CXX], [test x$ac_have_builtin_atomic_cxx = xyes])

#----------------------------------------------------------------------------
# Ok.  We're done checking.
#----------------------------------------------------------------------------

# Nb: VEX/Makefile is generated from Makefile.vex.in.
AC_CONFIG_FILES([
   Makefile 
   VEX/Makefile:Makefile.vex.in
   valgrind.spec
   valgrind.pc
   glibc-2.X.supp
   docs/Makefile 
   tests/Makefile 
   tests/vg_regtest 
   perf/Makefile 
   perf/vg_perf
   gdbserver_tests/Makefile
   include/Makefile 
   auxprogs/Makefile
   mpi/Makefile
   coregrind/Makefile 
   memcheck/Makefile
   memcheck/tests/Makefile
   memcheck/tests/amd64/Makefile
   memcheck/tests/x86/Makefile
   memcheck/tests/linux/Makefile
   memcheck/tests/darwin/Makefile
   memcheck/tests/amd64-linux/Makefile
   memcheck/tests/x86-linux/Makefile
   memcheck/tests/ppc32/Makefile
   memcheck/tests/ppc64/Makefile
   memcheck/perf/Makefile
   cachegrind/Makefile
   cachegrind/tests/Makefile
   cachegrind/tests/x86/Makefile
   cachegrind/cg_annotate
   cachegrind/cg_diff
   callgrind/Makefile
   callgrind/callgrind_annotate
   callgrind/callgrind_control
   callgrind/tests/Makefile
   helgrind/Makefile
   helgrind/tests/Makefile
   massif/Makefile
   massif/tests/Makefile
   massif/perf/Makefile
   massif/ms_print
   lackey/Makefile
   lackey/tests/Makefile
   none/Makefile
   none/tests/Makefile
   none/tests/amd64/Makefile
   none/tests/ppc32/Makefile
   none/tests/ppc64/Makefile
   none/tests/x86/Makefile
   none/tests/arm/Makefile
   none/tests/s390x/Makefile
   none/tests/linux/Makefile
   none/tests/darwin/Makefile
   none/tests/x86-linux/Makefile
   exp-sgcheck/Makefile
   exp-sgcheck/tests/Makefile
   drd/Makefile
   drd/scripts/download-and-build-splash2
   drd/tests/Makefile
   exp-bbv/Makefile
   exp-bbv/tests/Makefile
   exp-bbv/tests/x86/Makefile
   exp-bbv/tests/x86-linux/Makefile
   exp-bbv/tests/amd64-linux/Makefile
   exp-bbv/tests/ppc32-linux/Makefile
   exp-bbv/tests/arm-linux/Makefile
   exp-dhat/Makefile
   exp-dhat/tests/Makefile
])
AC_CONFIG_FILES([coregrind/link_tool_exe_linux],
                [chmod +x coregrind/link_tool_exe_linux])
AC_CONFIG_FILES([coregrind/link_tool_exe_darwin],
                [chmod +x coregrind/link_tool_exe_darwin])
AC_OUTPUT

cat<<EOF

         Maximum build arch: ${ARCH_MAX}
         Primary build arch: ${VGCONF_ARCH_PRI}
       Secondary build arch: ${VGCONF_ARCH_SEC}
                   Build OS: ${VGCONF_OS}
       Primary build target: ${VGCONF_PLATFORM_PRI_CAPS}
     Secondary build target: ${VGCONF_PLATFORM_SEC_CAPS}
           Platform variant: ${VGCONF_PLATVARIANT}
      Primary -DVGPV string: -DVGPV_${VGCONF_ARCH_PRI}_${VGCONF_OS}_${VGCONF_PLATVARIANT}=1
         Default supp files: ${DEFAULT_SUPP}

EOF