blob: 8059420ee2f38d3f733fa41663317df4a144702c [file] [log] [blame]
/*--- Handle remote gdb protocol. pub_core_gdbserver.h ---*/
This file is part of Valgrind, a dynamic binary instrumentation
Copyright (C) 2011-2013 Philippe Waroquiers
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307, USA.
The GNU General Public License is contained in the file COPYING.
#include "pub_tool_gdbserver.h"
#include "pub_core_threadstate.h" // VgSchedReturnCode
/* Return the default path prefix for the named pipes (FIFOs) used by vgdb/gdb
to communicate with valgrind */
HChar* VG_(vgdb_prefix_default)(void);
// After a fork or after an exec, call the below to (possibly) terminate
// the previous gdbserver and then activate a new gdbserver
// before any guest code execution, to e.g. allow the user to set
// breakpoints before execution.
// If VG_(clo_vgdb) == No, the below has no effect.
void VG_(gdbserver_prerun_action) (ThreadId tid);
// True if there is some activity from vgdb
// If it returns True, then extern void VG_(gdbserver) can be called
// to handle this incoming vgdb request.
extern Bool VG_(gdbserver_activity) (ThreadId tid);
// If connected to GDB, VG_(gdbserver_exit) reports to GDB that the process
// is about to exit.
// gdbserver is then stopped (using VG_(gdbserver) (0))
void VG_(gdbserver_exit) (ThreadId tid, VgSchedReturnCode tids_schedretcode);
/* On systems that defines PR_SET_PTRACER, verify if ptrace_scope is
is permissive enough for vgdb or --db-attach=yes.
Otherwise, call set_ptracer.
This is especially aimed at Ubuntu >= 10.10 which has added
the ptrace_scope context. */
void VG_(set_ptracer)(void);
/* Called by low level to insert or remove a break or watch point.
Break or watch point implementation is done using help from the tool.
break point support implies some (small) specific instrumentation
taken in charge for all tools by m_translate.c.
Write/read/access watchpoint can only be provided by tools which are
tracking addressability and/or accessibility of memory
(so typically memcheck can provide it). Note that memcheck addressability
bits do not differentiate between read and write accessibility.
However, when accessing unaddressable byte, memcheck can differentiate
reads from write, thereby providing read/write or access watchpoints.
Note that gdbserver assumes that software breakpoint is supported
(as this will be done by re-instrumenting the code).
Note that len is ignored for sofware breakpoints. hardware_breakpoint
are not supported.
Returns True if the point has properly been inserted or removed
Returns False otherwise. */
Bool VG_(gdbserver_point) (PointKind kind, Bool insert,
Addr addr, int len);
/* True if there is a breakpoint at addr. */
Bool VG_(has_gdbserver_breakpoint) (Addr addr);
/* Entry point invoked by vgdb when it uses ptrace to cause a gdbserver
invocation. A magic value is passed by vgdb in check as a verification
that the call has been properly pushed by vgdb. */
extern void VG_(invoke_gdbserver) ( int check );
// To be called by core (m_signals.c) before delivering a signal.
// Returns True unless gdb user asks to not pass the signal to the client.
// Note that if the below returns True, the signal might
// still be ignored if this is the action desired by the
// guest program.
extern Bool VG_(gdbserver_report_signal) (Int signo, ThreadId tid);
/* Entry point invoked by scheduler.c to execute the request
Returns True if command was not recognised. */
extern Bool VG_(client_monitor_command) (HChar* cmd);
/* software_breakpoint, single step and jump support ------------------------*/
/* VG_(instrument_for_gdbserver_if_needed) allows to do "standard and easy"
instrumentation for gdbserver.
VG_(instrument_for_gdbserver_if_needed) does the following:
* checks if gdbserver instrumentation is needed for vge.
* if no gdbserver instrumentation needed,
returns sb_in
* otherwise
It will instrument sb_in to allow gdbserver to properly
handle breakpoints and single_stepping in sb_in.
All the target jumps of sb_in will also be invalidated
if these are not yet instrumented for gdbserver.
This allows to have single_step working, using a lazily
translation of the blocks which are being single stepped
The typical usage of this function is to call it on the block
instrumented by the tool instrument function i.e. :
return VG_(instrument_for_gdbserver_if_needed) (sb_out,
where sb_out is the block instrumented by the tool.
If the block contains a call to a dirty helper that indirectly
calls gdbserver, then this dirty helper can (indirectly) change
the IP. This implies to jump to this IP after the call to
gdbserver. */
extern IRSB* VG_(instrument_for_gdbserver_if_needed)
(IRSB* sb_in, /* block to be instrumented */
VexGuestLayout* layout,
VexGuestExtents* vge,
IRType gWordTy, IRType hWordTy);
/* reason for which gdbserver connection must be finished */
enum {
reset_after_fork} FinishReason;
/* output various gdbserver statistics and status. */
extern void VG_(gdbserver_status_output)(void);
/* Shared structure between vgdb and the process running
under valgrind.
We define two variants: a 32 bit and a 64 bit.
The valgrind process will use the appropriate size,
according to the architecture.
vgdb will use what the valgrind process is using. */
/* The below takes care that sizes will be 32 or 64 bits,
whatever the architecture. A.o., vgdb.c cannot use directly
the types from pub_core_threadstate.h as we want vgdb.c to
be independent of the arch it is debugging in case of bi-arch
Valgrind (e.g. x86 and amd64). So, the valgrind process must
give all the needed info/offset to vgdb in the below structure. */
struct {
// nr of bytes vgdb has written to valgrind
volatile int written_by_vgdb;
// nr of bytes seen by valgrind
volatile int seen_by_valgrind;
// address at which gdbserver can be invoked
Addr32 invoke_gdbserver;
// address of VG_(threads) and various sizes
// and offset needed by vgdb.
Addr32 threads;
int sizeof_ThreadState;
int offset_status;
int offset_lwpid;
// PID of the vgdb that last connected to the Valgrind gdbserver.
// It will be set by vgdb after connecting.
int vgdb_pid;
} VgdbShared32;
/* Same as VgdbShared32 but for 64 bits arch. */
struct {
volatile int written_by_vgdb;
volatile int seen_by_valgrind;
Addr64 invoke_gdbserver;
Addr64 threads;
int sizeof_ThreadState;
int offset_status;
int offset_lwpid;
int vgdb_pid;
} VgdbShared64;
// The below typedef makes the life of valgrind easier.
// vgdb must however work explicitely with the specific 32 or 64 bits version.
typedef VgdbShared64 VgdbShared;
typedef VgdbShared32 VgdbShared;
# error "unexpected wordsize"
/*--- end ---*/