<?xml version="1.0"?> <!-- -*- sgml -*- -->
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
          "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[ <!ENTITY % vg-entities SYSTEM "../../docs/xml/vg-entities.xml"> %vg-entities; ]>


<chapter id="ms-manual" xreflabel="Massif: a heap profiler">
  <title>Massif: a heap profiler</title>

<para>To use this tool, you must specify
<option>--tool=massif</option> on the Valgrind
command line.</para>

<sect1 id="ms-manual.overview" xreflabel="Overview">
<title>Overview</title>

<para>Massif is a heap profiler.  It measures how much heap memory your
program uses.  This includes both the useful space, and the extra bytes
allocated for book-keeping and alignment purposes.  It can also
measure the size of your program's stack(s), although it does not do so by
default.</para>

<para>Heap profiling can help you reduce the amount of memory your program
uses.  On modern machines with virtual memory, this provides the following
benefits:</para>

<itemizedlist>
  <listitem><para>It can speed up your program -- a smaller
    program will interact better with your machine's caches and
    avoid paging.</para></listitem>

  <listitem><para>If your program uses lots of memory, it will
    reduce the chance that it exhausts your machine's swap
    space.</para></listitem>
</itemizedlist>

<para>Also, there are certain space leaks that aren't detected by
traditional leak-checkers, such as Memcheck's.  That's because
the memory isn't ever actually lost -- a pointer remains to it --
but it's not in use.  Programs that have leaks like this can
unnecessarily increase the amount of memory they are using over
time.  Massif can help identify these leaks.</para>

<para>Importantly, Massif tells you not only how much heap memory your
program is using, it also gives very detailed information that indicates
which parts of your program are responsible for allocating the heap memory.
</para>

</sect1>


<sect1 id="ms-manual.using" xreflabel="Using Massif and ms_print">
<title>Using Massif and ms_print</title>

<para>First off, as for the other Valgrind tools, you should compile with
debugging info (the <option>-g</option> option).  It shouldn't
matter much what optimisation level you compile your program with, as this
is unlikely to affect the heap memory usage.</para>

<para>Then, you need to run Massif itself to gather the profiling
information, and then run ms_print to present it in a readable way.</para>


<sect2 id="ms-manual.anexample" xreflabel="An Example">
<title>An Example Program</title>

<para>An example will make things clear.  Consider the following C program
(annotated with line numbers) which allocates a number of different blocks
on the heap.</para>

<screen><![CDATA[
 1      #include <stdlib.h>
 2
 3      void g(void)
 4      {
 5         malloc(4000);
 6      }
 7
 8      void f(void)
 9      {
10         malloc(2000);
11         g();
12      }
13
14      int main(void)
15      {
16         int i;
17         int* a[10];
18
19         for (i = 0; i < 10; i++) {
20            a[i] = malloc(1000);
21         }
22
23         f();
24
25         g();
26
27         for (i = 0; i < 10; i++) {
28            free(a[i]);
29         }
30
31         return 0;
32      }
]]></screen>

</sect2>


<sect2 id="ms-manual.running-massif" xreflabel="Running Massif">
<title>Running Massif</title>

<para>To gather heap profiling information about the program
<computeroutput>prog</computeroutput>, type:</para>
<screen><![CDATA[
valgrind --tool=massif prog
]]></screen>

<para>The program will execute (slowly).  Upon completion, no summary
statistics are printed to Valgrind's commentary;  all of Massif's profiling
data is written to a file.  By default, this file is called
<filename>massif.out.&lt;pid&gt;</filename>, where
<filename>&lt;pid&gt;</filename> is the process ID, although this filename
can be changed with the <option>--massif-out-file</option> option.</para>

</sect2>


<sect2 id="ms-manual.running-ms_print" xreflabel="Running ms_print">
<title>Running ms_print</title>

<para>To see the information gathered by Massif in an easy-to-read form, use
ms_print.  If the output file's name is
<filename>massif.out.12345</filename>, type:</para>
<screen><![CDATA[
ms_print massif.out.12345]]></screen>

<para>ms_print will produce (a) a graph showing the memory consumption over
the program's execution, and (b) detailed information about the responsible
allocation sites at various points in the program, including the point of
peak memory allocation.  The use of a separate script for presenting the
results is deliberate:  it separates the data gathering from its
presentation, and means that new methods of presenting the data can be added in
the future.</para>

</sect2>


<sect2 id="ms-manual.theoutputpreamble" xreflabel="The Output Preamble">
<title>The Output Preamble</title>

<para>After running this program under Massif, the first part of ms_print's
output contains a preamble which just states how the program, Massif and
ms_print were each invoked:</para>

<screen><![CDATA[
--------------------------------------------------------------------------------
Command:            example
Massif arguments:   (none)
ms_print arguments: massif.out.12797
--------------------------------------------------------------------------------
]]></screen>

</sect2>


<sect2 id="ms-manual.theoutputgraph" xreflabel="The Output Graph">
<title>The Output Graph</title>

<para>The next part is the graph that shows how memory consumption occurred
as the program executed:</para>

<screen><![CDATA[
    KB
19.63^                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                       #
     |                                                                      :#
     |                                                                      :#
     |                                                                      :#
   0 +----------------------------------------------------------------------->ki     0                                                                   113.4


Number of snapshots: 25
 Detailed snapshots: [9, 14 (peak), 24]
]]></screen>

<para>Why is most of the graph empty, with only a couple of bars at the very
end?  By default, Massif uses "instructions executed" as the unit of time.
For very short-run programs such as the example, most of the executed
instructions involve the loading and dynamic linking of the program.  The
execution of <computeroutput>main</computeroutput> (and thus the heap
allocations) only occur at the very end.  For a short-running program like
this, we can use the <option>--time-unit=B</option> option
to specify that we want the time unit to instead be the number of bytes
allocated/deallocated on the heap and stack(s).</para>

<para>If we re-run the program under Massif with this option, and then
re-run ms_print, we get this more useful graph:</para>

<screen><![CDATA[
19.63^                                               ###                      
     |                                               #                        
     |                                               #  ::                    
     |                                               #  : :::                 
     |                                      :::::::::#  : :  ::               
     |                                      :        #  : :  : ::             
     |                                      :        #  : :  : : :::          
     |                                      :        #  : :  : : :  ::        
     |                            :::::::::::        #  : :  : : :  : :::     
     |                            :         :        #  : :  : : :  : :  ::   
     |                        :::::         :        #  : :  : : :  : :  : :: 
     |                     @@@:   :         :        #  : :  : : :  : :  : : @
     |                   ::@  :   :         :        #  : :  : : :  : :  : : @
     |                :::: @  :   :         :        #  : :  : : :  : :  : : @
     |              :::  : @  :   :         :        #  : :  : : :  : :  : : @
     |            ::: :  : @  :   :         :        #  : :  : : :  : :  : : @
     |         :::: : :  : @  :   :         :        #  : :  : : :  : :  : : @
     |       :::  : : :  : @  :   :         :        #  : :  : : :  : :  : : @
     |    :::: :  : : :  : @  :   :         :        #  : :  : : :  : :  : : @
     |  :::  : :  : : :  : @  :   :         :        #  : :  : : :  : :  : : @
   0 +----------------------------------------------------------------------->KB     0                                                                   29.48

Number of snapshots: 25
 Detailed snapshots: [9, 14 (peak), 24]
]]></screen>

<para>The size of the graph can be changed with ms_print's
<option>--x</option> and <option>--y</option> options.  Each vertical bar
represents a snapshot, i.e. a measurement of the memory usage at a certain
point in time.  If the next snapshot is more than one column away, a
horizontal line of characters is drawn from the top of the snapshot to just
before the next snapshot column.  The text at the bottom show that 25
snapshots were taken for this program, which is one per heap
allocation/deallocation, plus a couple of extras.  Massif starts by taking
snapshots for every heap allocation/deallocation, but as a program runs for
longer, it takes snapshots less frequently.  It also discards older
snapshots as the program goes on;  when it reaches the maximum number of
snapshots (100 by default, although changeable with the
<option>--max-snapshots</option> option) half of them are
deleted.  This means that a reasonable number of snapshots are always
maintained.</para>

<para>Most snapshots are <emphasis>normal</emphasis>, and only basic
information is recorded for them.  Normal snapshots are represented in the
graph by bars consisting of ':' characters.</para>

<para>Some snapshots are <emphasis>detailed</emphasis>.  Information about
where allocations happened are recorded for these snapshots, as we will see
shortly.  Detailed snapshots are represented in the graph by bars consisting
of '@' characters.  The text at the bottom show that 3 detailed
snapshots were taken for this program (snapshots 9, 14 and 24).  By default,
every 10th snapshot is detailed, although this can be changed via the
<option>--detailed-freq</option> option.</para>

<para>Finally, there is at most one <emphasis>peak</emphasis> snapshot.  The
peak snapshot is a detailed snapshot, and records the point where memory
consumption was greatest.  The peak snapshot is represented in the graph by
a bar consisting of '#' characters.  The text at the bottom shows
that snapshot 14 was the peak.</para>

<para>Massif's determination of when the peak occurred can be wrong, for
two reasons.</para>

<itemizedlist>
  <listitem><para>Peak snapshots are only ever taken after a deallocation
  happens.  This avoids lots of unnecessary peak snapshot recordings
  (imagine what happens if your program allocates a lot of heap blocks in
  succession, hitting a new peak every time).  But it means that if your
  program never deallocates any blocks, no peak will be recorded.  It also
  means that if your program does deallocate blocks but later allocates to a
  higher peak without subsequently deallocating, the reported peak will be
  too low.
  </para>
  </listitem>

  <listitem><para>Even with this behaviour, recording the peak accurately
  is slow.  So by default Massif records a peak whose size is within 1% of
  the size of the true peak.  This inaccuracy in the peak measurement can be
  changed with the <option>--peak-inaccuracy</option> option.</para>
  </listitem>
</itemizedlist>

<para>The following graph is from an execution of Konqueror, the KDE web
browser.  It shows what graphs for larger programs look like.</para>
<screen><![CDATA[
    MB
3.952^                                                                    # 
     |                                                                   @#:
     |                                                                 :@@#:
     |                                                            @@::::@@#: 
     |                                                            @ :: :@@#::
     |                                                          @@@ :: :@@#::
     |                                                       @@:@@@ :: :@@#::
     |                                                    :::@ :@@@ :: :@@#::
     |                                                    : :@ :@@@ :: :@@#::
     |                                                  :@: :@ :@@@ :: :@@#:: 
     |                                                @@:@: :@ :@@@ :: :@@#:::
     |                           :       ::         ::@@:@: :@ :@@@ :: :@@#:::
     |                        :@@:    ::::: ::::@@@:::@@:@: :@ :@@@ :: :@@#:::
     |                     ::::@@:  ::: ::::::: @  :::@@:@: :@ :@@@ :: :@@#:::
     |                    @: ::@@:  ::: ::::::: @  :::@@:@: :@ :@@@ :: :@@#:::
     |                    @: ::@@:  ::: ::::::: @  :::@@:@: :@ :@@@ :: :@@#:::
     |                    @: ::@@:::::: ::::::: @  :::@@:@: :@ :@@@ :: :@@#:::
     |                ::@@@: ::@@:: ::: ::::::: @  :::@@:@: :@ :@@@ :: :@@#:::
     |             :::::@ @: ::@@:: ::: ::::::: @  :::@@:@: :@ :@@@ :: :@@#:::
     |           @@:::::@ @: ::@@:: ::: ::::::: @  :::@@:@: :@ :@@@ :: :@@#:::
   0 +----------------------------------------------------------------------->Mi
     0                                                                   626.4

Number of snapshots: 63
 Detailed snapshots: [3, 4, 10, 11, 15, 16, 29, 33, 34, 36, 39, 41,
                      42, 43, 44, 49, 50, 51, 53, 55, 56, 57 (peak)]
]]></screen>

<para>Note that the larger size units are KB, MB, GB, etc.  As is typical
for memory measurements, these are based on a multiplier of 1024, rather
than the standard SI multiplier of 1000.  Strictly speaking, they should be
written KiB, MiB, GiB, etc.</para>

</sect2>


<sect2 id="ms-manual.thesnapshotdetails" xreflabel="The Snapshot Details">
<title>The Snapshot Details</title>

<para>Returning to our example, the graph is followed by the detailed
information for each snapshot.  The first nine snapshots are normal, so only
a small amount of information is recorded for each one:</para>
<screen><![CDATA[
--------------------------------------------------------------------------------
  n        time(B)         total(B)   useful-heap(B) extra-heap(B)    stacks(B)
--------------------------------------------------------------------------------
  0              0                0                0             0            0
  1          1,008            1,008            1,000             8            0
  2          2,016            2,016            2,000            16            0
  3          3,024            3,024            3,000            24            0
  4          4,032            4,032            4,000            32            0
  5          5,040            5,040            5,000            40            0
  6          6,048            6,048            6,000            48            0
  7          7,056            7,056            7,000            56            0
  8          8,064            8,064            8,000            64            0
]]></screen>

<para>Each normal snapshot records several things.</para>

<itemizedlist>
  <listitem><para>Its number.</para></listitem>

  <listitem><para>The time it was taken. In this case, the time unit is
  bytes, due to the use of
  <option>--time-unit=B</option>.</para></listitem>

  <listitem><para>The total memory consumption at that point.</para></listitem>

  <listitem><para>The number of useful heap bytes allocated at that point.
  This reflects the number of bytes asked for by the
  program.</para></listitem>

  <listitem><para>The number of extra heap bytes allocated at that point.
  This reflects the number of bytes allocated in excess of what the program
  asked for.  There are two sources of extra heap bytes.</para>
  
  <para>First, every heap block has administrative bytes associated with it.
  The exact number of administrative bytes depends on the details of the
  allocator.  By default Massif assumes 8 bytes per block, as can be seen
  from the example, but this number can be changed via the
  <option>--heap-admin</option> option.</para>

  <para>Second, allocators often round up the number of bytes asked for to a
  larger number, usually 8 or 16.  This is required to ensure that elements
  within the block are suitably aligned.  If N bytes are asked for, Massif
  rounds N up to the nearest multiple of the value specified by the
  <option><xref linkend="opt.alignment"/></option> option.
  </para></listitem>

  <listitem><para>The size of the stack(s).  By default, stack profiling is
  off as it slows Massif down greatly.  Therefore, the stack column is zero
  in the example.  Stack profiling can be turned on with the
  <option>--stacks=yes</option> option.  
  
  </para></listitem>
</itemizedlist>

<para>The next snapshot is detailed.  As well as the basic counts, it gives
an allocation tree which indicates exactly which pieces of code were
responsible for allocating heap memory:</para>

<screen><![CDATA[
  9          9,072            9,072            9,000            72            0
99.21% (9,000B) (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
->99.21% (9,000B) 0x804841A: main (example.c:20)
]]></screen>

<para>The allocation tree can be read from the top down.  The first line
indicates all heap allocation functions such as <function>malloc</function>
and C++ <function>new</function>.  All heap allocations go through these
functions, and so all 9,000 useful bytes (which is 99.21% of all allocated
bytes) go through them.  But how were <function>malloc</function> and new
called?  At this point, every allocation so far has been due to line 20
inside <function>main</function>, hence the second line in the tree.  The
<option>-></option> indicates that main (line 20) called
<function>malloc</function>.</para>

<para>Let's see what the subsequent output shows happened next:</para>

<screen><![CDATA[
--------------------------------------------------------------------------------
  n        time(B)         total(B)   useful-heap(B) extra-heap(B)    stacks(B)
--------------------------------------------------------------------------------
 10         10,080           10,080           10,000            80            0
 11         12,088           12,088           12,000            88            0
 12         16,096           16,096           16,000            96            0
 13         20,104           20,104           20,000           104            0
 14         20,104           20,104           20,000           104            0
99.48% (20,000B) (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
->49.74% (10,000B) 0x804841A: main (example.c:20)
| 
->39.79% (8,000B) 0x80483C2: g (example.c:5)
| ->19.90% (4,000B) 0x80483E2: f (example.c:11)
| | ->19.90% (4,000B) 0x8048431: main (example.c:23)
| |   
| ->19.90% (4,000B) 0x8048436: main (example.c:25)
|   
->09.95% (2,000B) 0x80483DA: f (example.c:10)
  ->09.95% (2,000B) 0x8048431: main (example.c:23)
]]></screen>

<para>The first four snapshots are similar to the previous ones.  But then
the global allocation peak is reached, and a detailed snapshot (number 14)
is taken.  Its allocation tree shows that 20,000B of useful heap memory has
been allocated, and the lines and arrows indicate that this is from three
different code locations: line 20, which is responsible for 10,000B
(49.74%);  line 5, which is responsible for 8,000B (39.79%); and line 10,
which is responsible for 2,000B (9.95%).</para>

<para>We can then drill down further in the allocation tree.  For example,
of the 8,000B asked for by line 5, half of it was due to a call from line
11, and half was due to a call from line 25.</para>

<para>In short, Massif collates the stack trace of every single allocation
point in the program into a single tree, which gives a complete picture at
a particular point in time of how and why all heap memory was
allocated.</para>

<para>Note that the tree entries correspond not to functions, but to
individual code locations.  For example, if function <function>A</function>
calls <function>malloc</function>, and function <function>B</function> calls
<function>A</function> twice, once on line 10 and once on line 11, then
the two calls will result in two distinct stack traces in the tree.  In
contrast, if <function>B</function> calls <function>A</function> repeatedly
from line 15 (e.g. due to a loop), then each of those calls will be
represented by the same stack trace in the tree.</para>

<para>Note also that each tree entry with children in the example satisfies an
invariant: the entry's size is equal to the sum of its children's sizes.
For example, the first entry has size 20,000B, and its children have sizes
10,000B, 8,000B, and 2,000B.  In general, this invariant almost always
holds.  However, in rare circumstances stack traces can be malformed, in
which case a stack trace can be a sub-trace of another stack trace.  This
means that some entries in the tree may not satisfy the invariant -- the
entry's size will be greater than the sum of its children's sizes.  This is
not a big problem, but could make the results confusing.  Massif can
sometimes detect when this happens;  if it does, it issues a warning:</para>

<screen><![CDATA[
Warning: Malformed stack trace detected.  In Massif's output,
         the size of an entry's child entries may not sum up
         to the entry's size as they normally do.
]]></screen>

<para>However, Massif does not detect and warn about every such occurrence.
Fortunately, malformed stack traces are rare in practice.</para>

<para>Returning now to ms_print's output, the final part is similar:</para>

<screen><![CDATA[
--------------------------------------------------------------------------------
  n        time(B)         total(B)   useful-heap(B) extra-heap(B)    stacks(B)
--------------------------------------------------------------------------------
 15         21,112           19,096           19,000            96            0
 16         22,120           18,088           18,000            88            0
 17         23,128           17,080           17,000            80            0
 18         24,136           16,072           16,000            72            0
 19         25,144           15,064           15,000            64            0
 20         26,152           14,056           14,000            56            0
 21         27,160           13,048           13,000            48            0
 22         28,168           12,040           12,000            40            0
 23         29,176           11,032           11,000            32            0
 24         30,184           10,024           10,000            24            0
99.76% (10,000B) (heap allocation functions) malloc/new/new[], --alloc-fns, etc.
->79.81% (8,000B) 0x80483C2: g (example.c:5)
| ->39.90% (4,000B) 0x80483E2: f (example.c:11)
| | ->39.90% (4,000B) 0x8048431: main (example.c:23)
| |   
| ->39.90% (4,000B) 0x8048436: main (example.c:25)
|   
->19.95% (2,000B) 0x80483DA: f (example.c:10)
| ->19.95% (2,000B) 0x8048431: main (example.c:23)
|   
->00.00% (0B) in 1+ places, all below ms_print's threshold (01.00%)
]]></screen>

<para>The final detailed snapshot shows how the heap looked at termination.
The 00.00% entry represents the code locations for which memory was
allocated and then freed (line 20 in this case, the memory for which was
freed on line 28).  However, no code location details are given for this
entry;  by default, Massif only records the details for code locations
responsible for more than 1% of useful memory bytes, and ms_print likewise
only prints the details for code locations responsible for more than 1%.
The entries that do not meet this threshold are aggregated.  This avoids
filling up the output with large numbers of unimportant entries.  The
thresholds can be changed with the
<option>--threshold</option> option that both Massif and
ms_print support.</para>

</sect2>


<sect2 id="ms-manual.forkingprograms" xreflabel="Forking Programs">
<title>Forking Programs</title>
<para>If your program forks, the child will inherit all the profiling data that
has been gathered for the parent.</para>

<para>If the output file format string (controlled by
<option>--massif-out-file</option>) does not contain <option>%p</option>, then
the outputs from the parent and child will be intermingled in a single output
file, which will almost certainly make it unreadable by ms_print.</para>
</sect2>


<sect2 id="ms-manual.not-measured"
       xreflabel="Measuring All Memory in a Process">
<title>Measuring All Memory in a Process</title>
<para>
It is worth emphasising that by default Massif measures only heap memory, i.e.
memory allocated with
<function>malloc</function>,
<function>calloc</function>,
<function>realloc</function>,
<function>memalign</function>,
<function>new</function>,
<function>new[]</function>,
and a few other, similar functions.  (And it can optionally measure stack
memory, of course.)  This means it does <emphasis>not</emphasis> directly
measure memory allocated with lower-level system calls such as
<function>mmap</function>,
<function>mremap</function>, and
<function>brk</function>.  
</para>

<para>
Heap allocation functions such as <function>malloc</function> are built on
top of these system calls.  For example, when needed, an allocator will
typically call <function>mmap</function> to allocate a large chunk of
memory, and then hand over pieces of that memory chunk to the client program
in response to calls to <function>malloc</function> et al.  Massif directly
measures only these higher-level <function>malloc</function> et al calls,
not the lower-level system calls.
</para>

<para>
Furthermore, a client program may use these lower-level system calls
directly to allocate memory.  By default, Massif does not measure these.  Nor
does it measure the size of code, data and BSS segments.  Therefore, the
numbers reported by Massif may be significantly smaller than those reported by
tools such as <filename>top</filename> that measure a program's total size in
memory.
</para>

<para>
However, if you wish to measure <emphasis>all</emphasis> the memory used by
your program, you can use the <option>--pages-as-heap=yes</option>.  When this
option is enabled, Massif's normal heap block profiling is replaced by
lower-level page profiling.  Every page allocated via
<function>mmap</function> and similar system calls is treated as a distinct
block.  This means that code, data and BSS segments are all measured, as they
are just memory pages.  Even the stack is measured, since it is ultimately
allocated (and extended when necessary) via <function>mmap</function>;  for
this reason <option>--stacks=yes</option> is not allowed in conjunction with
<option>--pages-as-heap=yes</option>.
</para>

<para>
After <option>--pages-as-heap=yes</option> is used, ms_print's output is
mostly unchanged.  One difference is that the start of each detailed snapshot
says:
</para>

<screen><![CDATA[
(page allocation syscalls) mmap/mremap/brk, --alloc-fns, etc.
]]></screen>

<para>instead of the usual</para>:

<screen><![CDATA[
(heap allocation functions) malloc/new/new[], --alloc-fns, etc.
]]></screen>

<para>
The stack traces in the output may be more difficult to read, and interpreting
them may require some detailed understanding of the lower levels of a program
like the memory allocators.  But for some programs having the full information
about memory usage can be very useful.
</para>

</sect2>


<sect2 id="ms-manual.acting" xreflabel="Action on Massif's Information">
<title>Acting on Massif's Information</title>
<para>Massif's information is generally fairly easy to act upon.  The
obvious place to start looking is the peak snapshot.</para>

<para>It can also be useful to look at the overall shape of the graph, to
see if memory usage climbs and falls as you expect;  spikes in the graph
might be worth investigating.</para>

<para>The detailed snapshots can get quite large.  It is worth viewing them
in a very wide window.   It's also a good idea to view them with a text
editor.  That makes it easy to scroll up and down while keeping the cursor
in a particular column, which makes following the allocation chains easier.
</para>

</sect2>

</sect1>


<sect1 id="ms-manual.options" xreflabel="Massif Command-line Options">
<title>Massif Command-line Options</title>

<para>Massif-specific command-line options are:</para>

<!-- start of xi:include in the manpage -->
<variablelist id="ms.opts.list">

  <varlistentry id="opt.heap" xreflabel="--heap">
    <term>
      <option><![CDATA[--heap=<yes|no> [default: yes] ]]></option>
    </term>
    <listitem>
      <para>Specifies whether heap profiling should be done.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.heap-admin" xreflabel="--heap-admin">
    <term>
      <option><![CDATA[--heap-admin=<size> [default: 8] ]]></option>
    </term>
    <listitem>
      <para>If heap profiling is enabled, gives the number of administrative
      bytes per block to use.  This should be an estimate of the average,
      since it may vary.  For example, the allocator used by
      glibc on Linux requires somewhere between 4 to
      15 bytes per block, depending on various factors.  That allocator also
      requires admin space for freed blocks, but Massif cannot
      account for this.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.stacks" xreflabel="--stacks">
    <term>
      <option><![CDATA[--stacks=<yes|no> [default: no] ]]></option>
    </term>
    <listitem>
      <para>Specifies whether stack profiling should be done.  This option
      slows Massif down greatly, and so is off by default.  Note that Massif
      assumes that the main stack has size zero at start-up.  This is not
      true, but doing otherwise accurately is difficult.  Furthermore,
      starting at zero better indicates the size of the part of the main
      stack that a user program actually has control over.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.pages-as-heap" xreflabel="--pages-as-heap">
    <term>
      <option><![CDATA[--pages-as-heap=<yes|no> [default: no] ]]></option>
    </term>
    <listitem>
      <para>Tells Massif to profile memory at the page level rather
        than at the malloc'd block level.  See above for details.
      </para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.depth" xreflabel="--depth">
    <term>
      <option><![CDATA[--depth=<number> [default: 30] ]]></option>
    </term>
    <listitem>
      <para>Maximum depth of the allocation trees recorded for detailed
      snapshots.  Increasing it will make Massif run somewhat more slowly,
      use more memory, and produce bigger output files.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.alloc-fn" xreflabel="--alloc-fn">
    <term>
      <option><![CDATA[--alloc-fn=<name> ]]></option>
    </term>
    <listitem>
      <para>Functions specified with this option will be treated as though
      they were a heap allocation function such as
      <function>malloc</function>.  This is useful for functions that are
      wrappers to <function>malloc</function> or <function>new</function>,
      which can fill up the allocation trees with uninteresting information.
      This option can be specified multiple times on the command line, to
      name multiple functions.</para>

      <para>Note that the named function will only be treated this way if it is
      the top entry in a stack trace, or just below another function treated
      this way.  For example, if you have a function
      <function>malloc1</function> that wraps <function>malloc</function>,
      and <function>malloc2</function> that wraps
      <function>malloc1</function>, just specifying
      <option>--alloc-fn=malloc2</option> will have no effect.  You need to
      specify <option>--alloc-fn=malloc1</option> as well.  This is a little
      inconvenient, but the reason is that checking for allocation functions
      is slow, and it saves a lot of time if Massif can stop looking through
      the stack trace entries as soon as it finds one that doesn't match
      rather than having to continue through all the entries.</para>

      <para>Note that C++ names are demangled.  Note also that overloaded
      C++ names must be written in full.  Single quotes may be necessary to
      prevent the shell from breaking them up.  For example:
<screen><![CDATA[
--alloc-fn='operator new(unsigned, std::nothrow_t const&)'
]]></screen>
      </para>
      </listitem>
  </varlistentry>

  <varlistentry id="opt.ignore-fn" xreflabel="--ignore-fn">
    <term>
      <option><![CDATA[--ignore-fn=<name> ]]></option>
    </term>
    <listitem>
      <para>Any direct heap allocation (i.e. a call to
      <function>malloc</function>, <function>new</function>, etc, or a call
      to a function named by an <option>--alloc-fn</option>
      option) that occurs in a function specified by this option will be
      ignored.  This is mostly useful for testing purposes.  This option can
      be specified multiple times on the command line, to name multiple
      functions.
      </para>
      
      <para>Any <function>realloc</function> of an ignored block will
      also be ignored, even if the <function>realloc</function> call does
      not occur in an ignored function.  This avoids the possibility of
      negative heap sizes if ignored blocks are shrunk with
      <function>realloc</function>.
      </para>
      
      <para>The rules for writing C++ function names are the same as
      for <option>--alloc-fn</option> above.
      </para>
      </listitem>
  </varlistentry>

  <varlistentry id="opt.threshold" xreflabel="--threshold">
    <term>
      <option><![CDATA[--threshold=<m.n> [default: 1.0] ]]></option>
    </term>
    <listitem>
      <para>The significance threshold for heap allocations, as a
      percentage of total memory size.  Allocation tree entries that account
      for less than this will be aggregated.  Note that this should be
      specified in tandem with ms_print's option of the same name.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.peak-inaccuracy" xreflabel="--peak-inaccuracy">
    <term>
      <option><![CDATA[--peak-inaccuracy=<m.n> [default: 1.0] ]]></option>
    </term>
    <listitem>
      <para>Massif does not necessarily record the actual global memory
      allocation peak;  by default it records a peak only when the global
      memory allocation size exceeds the previous peak by at least 1.0%.
      This is because there can be many local allocation peaks along the way,
      and doing a detailed snapshot for every one would be expensive and
      wasteful, as all but one of them will be later discarded.  This
      inaccuracy can be changed (even to 0.0%) via this option, but Massif
      will run drastically slower as the number approaches zero.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.time-unit" xreflabel="--time-unit">
    <term>
      <option><![CDATA[--time-unit=<i|ms|B> [default: i] ]]></option>
    </term>
    <listitem>
      <para>The time unit used for the profiling.  There are three
      possibilities: instructions executed (i), which is good for most
      cases; real (wallclock) time (ms, i.e. milliseconds), which is
      sometimes useful; and bytes allocated/deallocated on the heap and/or
      stack (B), which is useful for very short-run programs, and for
      testing purposes, because it is the most reproducible across different
      machines.</para> </listitem>
  </varlistentry>

  <varlistentry id="opt.detailed-freq" xreflabel="--detailed-freq">
    <term>
      <option><![CDATA[--detailed-freq=<n> [default: 10] ]]></option>
    </term>
    <listitem>
      <para>Frequency of detailed snapshots.  With
      <option>--detailed-freq=1</option>, every snapshot is
      detailed.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.max-snapshots" xreflabel="--max-snapshots">
    <term>
      <option><![CDATA[--max-snapshots=<n> [default: 100] ]]></option>
    </term>
    <listitem>
      <para>The maximum number of snapshots recorded.  If set to N, for all
      programs except very short-running ones, the final number of snapshots
      will be between N/2 and N.</para>
    </listitem>
  </varlistentry>

  <varlistentry id="opt.massif-out-file" xreflabel="--massif-out-file">
    <term>
      <option><![CDATA[--massif-out-file=<file> [default: massif.out.%p] ]]></option>
    </term>
    <listitem>
      <para>Write the profile data to <computeroutput>file</computeroutput>
      rather than to the default output file,
      <computeroutput>massif.out.&lt;pid&gt;</computeroutput>.  The
      <option>%p</option> and <option>%q</option> format specifiers can be
      used to embed the process ID and/or the contents of an environment
      variable in the name, as is the case for the core option
      <option><xref linkend="opt.log-file"/></option>.
      </para>
    </listitem>
  </varlistentry>

</variablelist>
<!-- end of xi:include in the manpage -->

</sect1>

<sect1 id="ms-manual.monitor-commands" xreflabel="Massif Monitor Commands">
<title>Massif Monitor Commands</title>
<para>The Massif tool provides monitor commands handled by the Valgrind
gdbserver (see <xref linkend="manual-core-adv.gdbserver-commandhandling"/>).
</para>

<itemizedlist>
  <listitem>
    <para><varname>snapshot [&lt;filename&gt;]</varname> requests
    to take a snapshot and save it in the given &lt;filename&gt;
    (default massif.vgdb.out).
    </para>
  </listitem>
  <listitem>
    <para><varname>detailed_snapshot [&lt;filename&gt;]</varname>
    requests to take a detailed snapshot and save it in the given
    &lt;filename&gt; (default massif.vgdb.out).
    </para>
  </listitem>
</itemizedlist>
</sect1>

<sect1 id="ms-manual.clientreqs" xreflabel="Client requests">
<title>Massif Client Requests</title>

<para>Massif does not have a <filename>massif.h</filename> file, but it does
implement two of the core client requests:
<function>VALGRIND_MALLOCLIKE_BLOCK</function> and
<function>VALGRIND_FREELIKE_BLOCK</function>;  they are described in 
<xref linkend="manual-core-adv.clientreq"/>.
</para>

</sect1>


<sect1 id="ms-manual.ms_print-options" xreflabel="ms_print Command-line Options">
<title>ms_print Command-line Options</title>

<para>ms_print's options are:</para>

<!-- start of xi:include in the manpage -->
<variablelist id="ms_print.opts.list">

  <varlistentry>
    <term>
      <option><![CDATA[-h --help ]]></option>
    </term>
    <listitem>
      <para>Show the help message.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option><![CDATA[--version ]]></option>
    </term>
    <listitem>
      <para>Show the version number.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option><![CDATA[--threshold=<m.n> [default: 1.0] ]]></option>
    </term>
    <listitem>
      <para>Same as Massif's <option>--threshold</option> option, but
      applied after profiling rather than during.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option><![CDATA[--x=<4..1000> [default: 72]]]></option>
    </term>
    <listitem>
      <para>Width of the graph, in columns.</para>
    </listitem>
  </varlistentry>

  <varlistentry>
    <term>
      <option><![CDATA[--y=<4..1000> [default: 20] ]]></option>
    </term>
    <listitem>
      <para>Height of the graph, in rows.</para>
    </listitem>
  </varlistentry>

</variablelist>

</sect1>

<sect1 id="ms-manual.fileformat" xreflabel="fileformat">
<title>Massif's Output File Format</title>
<para>Massif's file format is plain text (i.e. not binary) and deliberately
easy to read for both humans and machines.  Nonetheless, the exact format
is not described here.  This is because the format is currently very
Massif-specific.  In the future we hope to make the format more general, and
thus suitable for possible use with other tools.  Once this has been done,
the format will be documented here.</para>

</sect1>

</chapter>