blob: 242d1ee9287360881d1b7898026384a22f6b0140 [file] [log] [blame]
if OMAP54XX
config SPL_EXT_SUPPORT
default y
config SPL_FAT_SUPPORT
default y
config SPL_GPIO_SUPPORT
default y
config SPL_I2C_SUPPORT
default y
config SPL_LIBCOMMON_SUPPORT
default y
config SPL_LIBDISK_SUPPORT
default y
config SPL_LIBGENERIC_SUPPORT
default y
config SPL_MMC_SUPPORT
default y
config SPL_NAND_SUPPORT
default y
config SPL_POWER_SUPPORT
default y
config SPL_SERIAL_SUPPORT
default y
config SPL_DISPLAY_PRINT
default y
choice
prompt "OMAP5 board select"
optional
config TARGET_CL_SOM_AM57X
bool "CompuLab CL-SOM-AM57x"
config TARGET_CM_T54
bool "CompuLab CM-T54"
config TARGET_OMAP5_UEVM
bool "TI OMAP5 uEVM board"
config TARGET_DRA7XX_EVM
bool "TI DRA7XX"
select TI_I2C_BOARD_DETECT
select PHYS_64BIT
config TARGET_AM57XX_EVM
bool "AM57XX"
select TI_I2C_BOARD_DETECT
endchoice
config SYS_SOC
default "omap5"
config TI_SECURE_EMIF_REGION_START
hex "Reserved EMIF region start address"
depends on TI_SECURE_DEVICE
default 0x0
help
Reserved EMIF region start address. Set to "0" to auto-select
to be at the end of the external memory region.
config TI_SECURE_EMIF_TOTAL_REGION_SIZE
hex "Reserved EMIF region size"
depends on TI_SECURE_DEVICE
default 0x0
help
Total reserved EMIF region size. Default is 0, which means no reserved EMIF
region on secure devices.
config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
hex "Size of protected region within reserved EMIF region"
depends on TI_SECURE_DEVICE
default 0x0
help
This config option is used to specify the size of the portion of the total
reserved EMIF region set aside for secure OS needs that will be protected
using hardware memory firewalls. This value must be smaller than the
TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM
menu "Voltage Domain OPP selections"
choice
prompt "MPU Voltage Domain"
default DRA7_MPU_OPP_NOM
help
Select the Operating Performance Point(OPP) for the MPU voltage
domain on DRA7xx & AM57xx SoCs.
config DRA7_MPU_OPP_NOM
bool "OPP NOM"
help
This config option enables Normal OPP for MPU. This is the safest
option for booting.
endchoice
choice
prompt "DSPEVE Voltage Domain"
help
Select the Operating Performance Point(OPP) for the DSPEVE voltage
domain on DRA7xx & AM57xx SoCs.
config DRA7_DSPEVE_OPP_NOM
bool "OPP NOM"
help
This config option enables Normal OPP for DSPEVE. This is the safest
option for booting and choose this when unsure about other OPPs .
config DRA7_DSPEVE_OPP_OD
bool "OPP OD"
help
This config option enables Over drive OPP for DSPEVE.
config DRA7_DSPEVE_OPP_HIGH
bool "OPP HIGH"
help
This config option enables High OPP for DSPEVE.
endchoice
choice
prompt "IVA Voltage Domain"
help
Select the Operating Performance Point(OPP) for the IVA voltage
domain on DRA7xx & AM57xx SoCs.
config DRA7_IVA_OPP_NOM
bool "OPP NOM"
help
This config option enables Normal OPP for IVA. This is the safest
option for booting and choose this when unsure about other OPPs .
config DRA7_IVA_OPP_OD
bool "OPP OD"
help
This config option enables Over drive OPP for IVA.
config DRA7_IVA_OPP_HIGH
bool "OPP HIGH"
help
This config option enables High OPP for IVA.
endchoice
choice
prompt "GPU Voltage Domain"
help
Select the Operating Performance Point(OPP) for the GPU voltage
domain on DRA7xx & AM57xx SoCs.
config DRA7_GPU_OPP_NOM
bool "OPP NOM"
help
This config option enables Normal OPP for GPU. This is the safest
option for booting and choose this when unsure about other OPPs .
config DRA7_GPU_OPP_OD
bool "OPP OD"
help
This config option enables Over drive OPP for GPU.
config DRA7_GPU_OPP_HIGH
bool "OPP HIGH"
help
This config option enables High OPP for GPU.
endchoice
endmenu
endif
source "board/compulab/cl-som-am57x/Kconfig"
source "board/compulab/cm_t54/Kconfig"
source "board/ti/omap5_uevm/Kconfig"
source "board/ti/dra7xx/Kconfig"
source "board/ti/am57xx/Kconfig"
endif