android / platform / external / tremolo / 370160dc7f76fdf034b1a6efbc593c9586c15878 / . / Tremolo / bitwiseARM.s

@ Tremolo library | |

@----------------------------------------------------------------------- | |

@ Copyright (C) 2002-2009, Xiph.org Foundation | |

@ Copyright (C) 2010, Robin Watts for Pinknoise Productions Ltd | |

@ All rights reserved. | |

@ Redistribution and use in source and binary forms, with or without | |

@ modification, are permitted provided that the following conditions | |

@ are met: | |

@ * Redistributions of source code must retain the above copyright | |

@ notice, this list of conditions and the following disclaimer. | |

@ * Redistributions in binary form must reproduce the above | |

@ copyright notice, this list of conditions and the following disclaimer | |

@ in the documentation and/or other materials provided with the | |

@ distribution. | |

@ * Neither the names of the Xiph.org Foundation nor Pinknoise | |

@ Productions Ltd nor the names of its contributors may be used to | |

@ endorse or promote products derived from this software without | |

@ specific prior written permission. | |

@ | |

@ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |

@ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |

@ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |

@ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |

@ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |

@ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |

@ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |

@ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |

@ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |

@ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |

@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |

@ ---------------------------------------------------------------------- | |

.text | |

.global oggpack_look | |

.global oggpack_adv | |

.global oggpack_readinit | |

.global oggpack_read | |

oggpack_look: | |

@ r0 = oggpack_buffer *b | |

@ r1 = int bits | |

STMFD r13!,{r10,r11,r14} | |

LDMIA r0,{r2,r3,r12} | |

@ r2 = bitsLeftInSegment | |

@ r3 = ptr | |

@ r12= bitsLeftInWord | |

SUBS r2,r2,r1 @ bitsLeftinSegment -= bits | |

BLT look_slow @ Not enough bits in this segment for | |

@ this request. Do it slowly. | |

LDR r10,[r3] @ r10= ptr[0] | |

RSB r14,r12,#32 @ r14= 32-bitsLeftInWord | |

SUBS r12,r12,r1 @ r12= bitsLeftInWord -= bits | |

LDRLT r11,[r3,#4]! @ r11= ptr[1] | |

MOV r10,r10,LSR r14 @ r10= ptr[0]>>(32-bitsLeftInWord) | |

ADDLE r12,r12,#32 @ r12= bitsLeftInWord += 32 | |

RSB r14,r14,#32 @ r14= 32-bitsLeftInWord | |

ORRLT r10,r10,r11,LSL r14 @ r10= Next 32 bits. | |

MOV r14,#1 | |

RSB r14,r14,r14,LSL r1 | |

AND r0,r10,r14 | |

LDMFD r13!,{r10,r11,PC} | |

look_slow: | |

STMFD r13!,{r5,r6} | |

ADDS r10,r2,r1 @ r10= bitsLeftInSegment + bits (i.e. | |

@ the initial value of bitsLeftInSeg) | |

@ r10 = bitsLeftInSegment (initial) | |

@ r12 = bitsLeftInWord | |

RSB r14,r12,#32 @ r14= 32-bitsLeftInWord | |

MOV r5,r10 @ r5 = bitsLeftInSegment (initial) | |

BLT look_overrun | |

BEQ look_next_segment @ r10= r12 = 0, if we branch | |

CMP r12,r10 @ If bitsLeftInWord < bitsLeftInSeg | |

@ there must be more in the next word | |

LDR r10,[r3],#4 @ r10= ptr[0] | |

LDRLT r6,[r3] @ r6 = ptr[1] | |

MOV r11,#1 | |

MOV r10,r10,LSR r14 @ r10= first bitsLeftInWord bits | |

ORRLT r10,r10,r6,LSL r12 @ r10= first bitsLeftInSeg bits+crap | |

RSB r11,r11,r11,LSL r5 @ r11= mask | |

AND r10,r10,r11 @ r10= first r5 bits | |

@ Load the next segments data | |

look_next_segment: | |

@ At this point, r10 contains the first r5 bits of the result | |

LDR r11,[r0,#12] @ r11= head = b->head | |

@ Stall | |

@ Stall | |

look_next_segment_2: | |

LDR r11,[r11,#12] @ r11= head = head->next | |

@ Stall | |

@ Stall | |

CMP r11,#0 | |

BEQ look_out_of_data | |

LDMIA r11,{r6,r12,r14} @ r6 = buffer | |

@ r12= begin | |

@ r14= length | |

LDR r6,[r6] @ r6 = buffer->data | |

CMP r14,#0 | |

BEQ look_next_segment_2 | |

ADD r6,r6,r12 @ r6 = buffer->data+begin | |

look_slow_loop: | |

LDRB r12,[r6],#1 @ r12= *buffer | |

SUBS r14,r14,#1 @ r14= length | |

@ Stall | |

ORR r10,r10,r12,LSL r5 @ r10= first r5+8 bits | |

ADD r5,r5,#8 | |

BLE look_really_slow | |

CMP r5,r1 | |

BLT look_slow_loop | |

MOV r14,#1 | |

RSB r14,r14,r14,LSL r1 | |

AND r0,r10,r14 | |

LDMFD r13!,{r5,r6,r10,r11,PC} | |

look_really_slow: | |

CMP r5,r1 | |

BLT look_next_segment_2 | |

MOV r14,#1 | |

RSB r14,r14,r14,LSL r1 | |

AND r0,r10,r14 | |

LDMFD r13!,{r5,r6,r10,r11,PC} | |

look_out_of_data: | |

@MVN r0,#0 ; return -1 | |

MOV r0,#0 | |

LDMFD r13!,{r5,r6,r10,r11,PC} | |

look_overrun: | |

@ We had overrun when we started, so we need to skip -r10 bits. | |

LDR r11,[r0,#12] @ r11 = head = b->head | |

@ stall | |

@ stall | |

look_overrun_next_segment: | |

LDR r11,[r11,#12] @ r11 = head->next | |

@ stall | |

@ stall | |

CMP r11,#0 | |

BEQ look_out_of_data | |

LDMIA r11,{r6,r7,r14} @ r6 = buffer | |

@ r7 = begin | |

@ r14= length | |

LDR r6,[r6] @ r6 = buffer->data | |

@ stall | |

@ stall | |

ADD r6,r6,r7 @ r6 = buffer->data+begin | |

MOV r14,r14,LSL #3 @ r14= length in bits | |

ADDS r14,r14,r10 @ r14= length in bits-bits to skip | |

MOVLE r10,r14 | |

BLE look_overrun_next_segment | |

RSB r10,r10,#0 @ r10= bits to skip | |

ADD r6,r10,r10,LSR #3 @ r6 = pointer to data | |

MOV r10,#0 | |

B look_slow_loop | |

oggpack_adv: | |

@ r0 = oggpack_buffer *b | |

@ r1 = bits | |

LDMIA r0,{r2,r3,r12} | |

@ r2 = bitsLeftInSegment | |

@ r3 = ptr | |

@ r12= bitsLeftInWord | |

SUBS r2,r2,r1 @ Does this run us out of bits in the | |

BLE adv_slow @ segment? If so, do it slowly | |

SUBS r12,r12,r1 | |

ADDLE r12,r12,#32 | |

ADDLE r3,r3,#4 | |

STMIA r0,{r2,r3,r12} | |

BX LR | |

adv_slow: | |

STMFD r13!,{r10,r14} | |

LDR r14,[r0,#12] @ r14= head | |

@ stall | |

adv_slow_loop: | |

LDR r1,[r0,#20] @ r1 = count | |

LDR r10,[r14,#8] @ r10= head->length | |

LDR r14,[r14,#12] @ r14= head->next | |

@ stall | |

ADD r1,r1,r10 @ r1 = count += head->length | |

CMP r14,#0 | |

BEQ adv_end | |

STR r1,[r0,#20] @ b->count = count | |

STR r14,[r0,#12] @ b->head = head | |

LDMIA r14,{r3,r10,r12} @ r3 = buffer | |

@ r10= begin | |

@ r12= length | |

LDR r3,[r3] @ r3 = buffer->data | |

ADD r3,r3,r10 @ r3 = Pointer to start (byte) | |

AND r10,r3,#3 @ r10= bytes to backtrk to word align | |

MOV r10,r10,LSL #3 @ r10= bits to backtrk to word align | |

RSB r10,r10,#32 @ r10= bits left in word | |

ADDS r10,r10,r2 @ r10= bits left in word after skip | |

ADDLE r10,r10,#32 | |

ADDLE r3,r3,#4 | |

BIC r3,r3,#3 @ r3 = Pointer to start (word) | |

ADDS r2,r2,r12,LSL #3 @ r2 = length in bits after advance | |

BLE adv_slow_loop | |

STMIA r0,{r2,r3,r10} | |

LDMFD r13!,{r10,PC} | |

adv_end: | |

MOV r2, #0 | |

MOV r12,#0 | |

STMIA r0,{r2,r3,r12} | |

LDMFD r13!,{r10,PC} | |

oggpack_readinit: | |

@ r0 = oggpack_buffer *b | |

@ r1 = oggreference *r | |

STR r1,[r0,#12] @ b->head = r1 | |

STR r1,[r0,#16] @ b->tail = r1 | |

LDMIA r1,{r2,r3,r12} @ r2 = b->head->buffer | |

@ r3 = b->head->begin | |

@ r12= b->head->length | |

LDR r2,[r2] @ r2 = b->head->buffer->data | |

MOV r1,r12,LSL #3 @ r1 = BitsInSegment | |

MOV r12,#0 | |

ADD r3,r2,r3 @ r3 = r2+b->head->begin | |

BIC r2,r3,#3 @ r2 = b->headptr (word) | |

AND r3,r3,#3 | |

MOV r3,r3,LSL #3 | |

RSB r3,r3,#32 @ r3 = BitsInWord | |

STMIA r0,{r1,r2,r3} | |

STR r12,[r0,#20] | |

BX LR | |

oggpack_read: | |

@ r0 = oggpack_buffer *b | |

@ r1 = int bits | |

STMFD r13!,{r10,r11,r14} | |

LDMIA r0,{r2,r3,r12} | |

@ r2 = bitsLeftInSegment | |

@ r3 = ptr | |

@ r12= bitsLeftInWord | |

SUBS r2,r2,r1 @ bitsLeftinSegment -= bits | |

BLT read_slow @ Not enough bits in this segment for | |

@ this request. Do it slowly. | |

LDR r10,[r3] @ r10= ptr[0] | |

RSB r14,r12,#32 @ r14= 32-bitsLeftInWord | |

SUBS r12,r12,r1 @ r12= bitsLeftInWord -= bits | |

ADDLE r3,r3,#4 | |

LDRLT r11,[r3] @ r11= ptr[1] | |

MOV r10,r10,LSR r14 @ r10= ptr[0]>>(32-bitsLeftInWord) | |

ADDLE r12,r12,#32 @ r12= bitsLeftInWord += 32 | |

RSB r14,r14,#32 @ r14= 32-bitsLeftInWord | |

ORRLT r10,r10,r11,LSL r14 @ r10= Next 32 bits. | |

STMIA r0,{r2,r3,r12} | |

MOV r14,#1 | |

RSB r14,r14,r14,LSL r1 | |

AND r0,r10,r14 | |

LDMFD r13!,{r10,r11,PC} | |

read_slow: | |

STMFD r13!,{r5,r6} | |

ADDS r10,r2,r1 @ r10= bitsLeftInSegment + bits (i.e. | |

@ the initial value of bitsLeftInSeg) | |

@ r10 = bitsLeftInSegment (initial) | |

@ r12 = bitsLeftInWord | |

RSB r14,r12,#32 @ r14= 32-bitsLeftInWord | |

MOV r5,r10 @ r5 = bitsLeftInSegment (initial) | |

BLT read_overrun | |

BEQ read_next_segment @ r10= r12 = 0, if we branch | |

CMP r12,r10 @ If bitsLeftInWord < bitsLeftInSeg | |

@ there must be more in the next word | |

LDR r10,[r3],#4 @ r10= ptr[0] | |

LDRLT r6,[r3] @ r6 = ptr[1] | |

MOV r11,#1 | |

MOV r10,r10,LSR r14 @ r10= first bitsLeftInWord bits | |

ORRLT r10,r10,r6,LSL r12 @ r10= first bitsLeftInSeg bits+crap | |

RSB r11,r11,r11,LSL r5 @ r11= mask | |

AND r10,r10,r11 @ r10= first r5 bits | |

@ Load the next segments data | |

read_next_segment: | |

@ At this point, r10 contains the first r5 bits of the result | |

LDR r11,[r0,#12] @ r11= head = b->head | |

@ Stall | |

read_next_segment_2: | |

@ r11 = head | |

LDR r6,[r0,#20] @ r6 = count | |

LDR r12,[r11,#8] @ r12= length | |

LDR r11,[r11,#12] @ r11= head = head->next | |

@ Stall | |

ADD r6,r6,r12 @ count += length | |

CMP r11,#0 | |

BEQ read_out_of_data | |

STR r11,[r0,#12] | |

STR r6,[r0,#20] @ b->count = count | |

LDMIA r11,{r6,r12,r14} @ r6 = buffer | |

@ r12= begin | |

@ r14= length | |

LDR r6,[r6] @ r6 = buffer->data | |

CMP r14,#0 | |

BEQ read_next_segment_2 | |

ADD r6,r6,r12 @ r6 = buffer->data+begin | |

read_slow_loop: | |

LDRB r12,[r6],#1 @ r12= *buffer | |

SUBS r14,r14,#1 @ r14= length | |

@ Stall | |

ORR r10,r10,r12,LSL r5 @ r10= first r5+8 bits | |

ADD r5,r5,#8 | |

BLE read_really_slow | |

CMP r5,r1 | |

BLT read_slow_loop | |

read_end: | |

MOV r12,#1 | |

RSB r12,r12,r12,LSL r1 | |

@ Store back the new position | |

@ r2 = -number of bits to go from this segment | |

@ r6 = ptr | |

@ r14= bytesLeftInSegment | |

@ r11= New head value | |

LDMIA r11,{r3,r6,r14} @ r3 = buffer | |

@ r6 = begin | |

@ r14= length | |

LDR r3,[r3] @ r3 = buffer->data | |

ADD r1,r2,r14,LSL #3 @ r1 = bitsLeftInSegment | |

@ stall | |

ADD r6,r3,r6 @ r6 = pointer | |

AND r3,r6,#3 @ r3 = bytes used in first word | |

RSB r3,r2,r3,LSL #3 @ r3 = bits used in first word | |

BIC r2,r6,#3 @ r2 = word ptr | |

RSBS r3,r3,#32 @ r3 = bitsLeftInWord | |

ADDLE r3,r3,#32 | |

ADDLE r2,r2,#4 | |

STMIA r0,{r1,r2,r3} | |

AND r0,r10,r12 | |

LDMFD r13!,{r5,r6,r10,r11,PC} | |

read_really_slow: | |

CMP r5,r1 | |

BGE read_end | |

LDR r14,[r11,#8] @ r14= length of segment just done | |

@ stall | |

@ stall | |

ADD r2,r2,r14,LSL #3 @ r2 = -bits to use from next seg | |

B read_next_segment_2 | |

read_out_of_data: | |

@ Store back the new position | |

@ r2 = -number of bits to go from this segment | |

@ r6 = ptr | |

@ r14= bytesLeftInSegment | |

@ RJW: This may be overkill - we leave the buffer empty, with -1 | |

@ bits left in it. We might get away with just storing the | |

@ bitsLeftInSegment as -1. | |

LDR r11,[r0,#12] @ r11=head | |

LDMIA r11,{r3,r6,r14} @ r3 = buffer | |

@ r6 = begin | |

@ r14= length | |

LDR r3,[r3] @ r3 = buffer->data | |

ADD r6,r3,r6 @ r6 = pointer | |

ADD r6,r6,r14 | |

AND r3,r6,#3 @ r3 = bytes used in first word | |

MOV r3,r3,LSL #3 @ r3 = bits used in first word | |

BIC r2,r6,#3 @ r2 = word ptr | |

RSBS r3,r3,#32 @ r3 = bitsLeftInWord | |

MVN r1,#0 @ r1 = -1 = bitsLeftInSegment | |

STMIA r0,{r1,r2,r3} | |

@MVN r0,#0 ; return -1 | |

MOV r0,#0 | |

LDMFD r13!,{r5,r6,r10,r11,PC} | |

read_overrun: | |

@ We had overrun when we started, so we need to skip -r10 bits. | |

LDR r11,[r0,#12] @ r11 = head = b->head | |

@ stall | |

@ stall | |

read_overrun_next_segment: | |

LDR r11,[r11,#12] @ r11 = head->next | |

@ stall | |

@ stall | |

CMP r11,#0 | |

BEQ read_out_of_data | |

LDMIA r11,{r6,r7,r14} @ r6 = buffer | |

@ r7 = begin | |

@ r14= length | |

LDR r6,[r6] @ r6 = buffer->data | |

@ stall | |

@ stall | |

ADD r6,r6,r7 @ r6 = buffer->data+begin | |

MOV r14,r14,LSL #3 @ r14= length in bits | |

ADDS r14,r14,r10 @ r14= length in bits-bits to skip | |

MOVLE r10,r14 | |

BLE read_overrun_next_segment | |

RSB r10,r10,#0 @ r10= bits to skip | |

ADD r6,r10,r10,LSR #3 @ r6 = pointer to data | |

MOV r10,#0 | |

B read_slow_loop | |

@ END |