blob: 0f07cd9c8c51d80e63607d11577c81c48c24f032 [file] [log] [blame]
#!/bin/bash
# ------------------------------ Part 1: Setup -------------------------------
# Clear environment variables by restarting script w/bare minimum passed through
[ -z "$NOCLEAR" ] && exec env -i NOCLEAR=1 HOME="$HOME" PATH="$PATH" \
LINUX="$LINUX" CROSS="$CROSS" CROSS_COMPILE="$CROSS_COMPILE" "$0" "$@"
# assign command line NAME=VALUE args to env vars, the rest are packages
for i in "$@"; do
[ "${i/=/}" != "$i" ] && export "$i" || { [ "$i" != -- ] && PKG="$PKG $i"; }
done
# Set default values for directories (overrideable from command line)
: ${LOG:=${BUILD:=${TOP:=$PWD/root}/build}/log} ${AIRLOCK:=$BUILD/airlock}
: ${CCC:=$PWD/ccc} ${PKGDIR:=$PWD/scripts/root}
# useful functions
announce() { echo -e "\033]2;$CROSS $*\007\n=== $*"; }
die() { echo "$@" >&2; exit 1; }
# ----- Are we cross compiling (via CROSS_COMPILE= or CROSS=)
if [ -n "$CROSS_COMPILE" ]; then
CROSS_COMPILE="$(realpath -s "$CROSS_COMPILE")" # airlock needs absolute path
[ -z "$CROSS" ] && CROSS=${CROSS_COMPILE/*\//} CROSS=${CROSS/-*/}
elif [ -n "$CROSS" ]; then # CROSS=all/allnonstop/$ARCH else list known $ARCHes
[ ! -d "$CCC" ] && die "No ccc symlink to compiler directory."
TARGETS="$(ls "$CCC" | sed -n 's/-.*//p' | sort -u)"
if [ "${CROSS::3}" == all ]; then # loop calling ourselves for each target
for i in $TARGETS; do
"$0" "$@" CROSS=$i || [ "$CROSS" == allnonstop ] || exit 1
done; exit
else # Find matching cross compiler under ccc/ else list available targets
CROSS_COMPILE="$(echo "$CCC/$CROSS"-*cross/bin/"$CROSS"*-cc)" # wildcard
[ ! -e "$CROSS_COMPILE" ] && echo $TARGETS && exit # list available targets
CROSS_COMPILE="${CROSS_COMPILE%cc}" # trim to prefix for cc/ld/as/nm/strip
fi
fi
# Verify selected compiler works
${CROSS_COMPILE}cc --static -xc - -o /dev/null <<< "int main(void){return 0;}"||
die "${CROSS_COMPILE}cc can't create static binaries"
# When not cross compiling set CROSS=host. Create per-target output directory
: ${CROSS:=host} ${OUTPUT:=$TOP/$CROSS}
# ----- Create hermetic build environment
if [ -z "$NOAIRLOCK"] && [ -n "$CROSS_COMPILE" ]; then
# When cross compiling set host $PATH to binaries with known behavior by
# - building a host toybox later builds use as their command line
# - cherry-picking specific commands from old path via symlink
if [ ! -e "$AIRLOCK/toybox" ]; then
announce "airlock" &&
PREFIX="$AIRLOCK" KCONFIG_CONFIG=.singleconfig_airlock CROSS_COMPILE= \
make clean defconfig toybox install_airlock && # see scripts/install.sh
rm .singleconfig_airlock || exit 1
fi
export PATH="$AIRLOCK"
fi
# Create per-target work directories
MYBUILD="$BUILD/${CROSS}-tmp" && rm -rf "$MYBUILD" &&
mkdir -p "$MYBUILD" "$OUTPUT" "$LOG" || exit 1
[ -z "$ROOT" ] && ROOT="$OUTPUT/fs" && rm -rf "$ROOT"
# ----- log build output
# Install command line recording wrapper, logs all commands run from $PATH
if [ -z "$NOLOGPATH" ]; then
# Move cross compiler into $PATH so calls to it get logged
[ -n "$CROSS_COMPILE" ] && PATH="${CROSS_COMPILE%/*}:$PATH" &&
CROSS_COMPILE=${CROSS_COMPILE##*/}
export WRAPDIR="$BUILD/record-commands" LOGPATH="$LOG/$CROSS-commands.txt"
rm -rf "$WRAPDIR" "$LOGPATH" generated/obj &&
WRAPDIR="$WRAPDIR" CROSS_COMPILE= NOSTRIP=1 source scripts/record-commands ||
exit 1
fi
# Start logging stdout/stderr
rm -f "$LOG/$CROSS".{n,y} || exit 1
[ -z "$NOLOG" ] && exec > >(tee "$LOG/$CROSS.n") 2>&1
echo "Building for $CROSS"
# ---------------------- Part 2: Create root filesystem -----------------------
# ----- Create new root filesystem's directory layout.
# FHS wants boot media opt srv usr/{local,share}, stuff under /var...
mkdir -p "$ROOT"/{dev,etc/rc,home,mnt,proc,root,sys,tmp/run,usr/{bin,sbin,lib},var} &&
chmod a+rwxt "$ROOT"/tmp && ln -s usr/{bin,sbin,lib} tmp/run "$ROOT" || exit 1
# Write init script. Runs as pid 1 from initramfs to set up and hand off system.
cat > "$ROOT"/init << 'EOF' &&
#!/bin/sh
export HOME=/home PATH=/bin:/sbin
if ! mountpoint -q dev; then
mount -t devtmpfs dev dev
[ $$ -eq 1 ] && exec 0<>/dev/console 1>&0 2>&1
for i in ,fd /0,stdin /1,stdout /2,stderr
do ln -sf /proc/self/fd${i/,*/} dev/${i/*,/}; done
mkdir -p dev/{shm,pts}
chmod +t /dev/shm
fi
mountpoint -q dev/pts || mount -t devpts dev/pts dev/pts
mountpoint -q proc || mount -t proc proc proc
mountpoint -q sys || mount -t sysfs sys sys
echo 0 99999 > /proc/sys/net/ipv4/ping_group_range
if [ $$ -eq 1 ]; then # Setup networking for QEMU (needs /proc)
ifconfig lo 127.0.0.1
ifconfig eth0 10.0.2.15
route add default gw 10.0.2.2
[ "$(date +%s)" -lt 1000 ] && timeout 2 sntp -sq 10.0.2.2 # Ask host
[ "$(date +%s)" -lt 10000000 ] && sntp -sq time.google.com
# Run package scripts (if any)
for i in $(ls -1 /etc/rc 2>/dev/null | sort); do . /etc/rc/"$i"; done
[ -z "$CONSOLE" ] && CONSOLE="$(</sys/class/tty/console/active)"
[ -z "$HANDOFF" ] && HANDOFF=/bin/sh && echo -e '\e[?7hType exit when done.'
echo 3 > /proc/sys/kernel/printk
exec oneit -c /dev/"${CONSOLE:-console}" $HANDOFF
else # for chroot
/bin/sh
umount /dev/pts /dev /sys /proc
fi
EOF
chmod +x "$ROOT"/init &&
# Google's nameserver, passwd+group with special (root/nobody) accounts + guest
echo "nameserver 8.8.8.8" > "$ROOT"/etc/resolv.conf &&
cat > "$ROOT"/etc/passwd << 'EOF' &&
root:x:0:0:root:/root:/bin/sh
guest:x:500:500:guest:/home/guest:/bin/sh
nobody:x:65534:65534:nobody:/proc/self:/dev/null
EOF
echo -e 'root:x:0:\nguest:x:500:\nnobody:x:65534:' > "$ROOT"/etc/group || exit 1
# Build static toybox with existing .config if there is one, else defconfig+sh
announce toybox
[ -e .config ] && [ -z "$PENDING" ] && CONF=silentoldconfig || unset CONF
for i in $PENDING sh route; do XX="$XX"$'\n'CONFIG_${i^^?}=y; done
LDFLAGS=--static PREFIX="$ROOT" make clean \
${CONF:-defconfig KCONFIG_ALLCONFIG=<(echo "$XX")} toybox install || exit 1
# Build any packages listed on command line
for i in ${PKG:+plumbing $PKG}; do
announce "$i"; PATH="$PKGDIR:$PATH" source $i || die $i
done
# ------------------ Part 3: Build + package bootable system ------------------
# ----- Build kernel for target
if [ -z "$LINUX" ] || [ ! -d "$LINUX/kernel" ]; then
echo 'No $LINUX directory, kernel build skipped.'
else
# Which architecture are we building a kernel for?
LINUX="$(realpath "$LINUX")"
[ -z "$TARGET" ] &&
{ [ "$CROSS" == host ] && TARGET="$(uname -m)" || TARGET="$CROSS"; }
# Target-specific info in an (alphabetical order) if/else staircase
# Each target needs board config, serial console, RTC, ethernet, block device.
if [ "$TARGET" == armv5l ]; then
# This could use the same VIRT board as armv7, but let's demonstrate a
# different one requiring a separate device tree binary.
QEMU="arm -M versatilepb -net nic,model=rtl8139 -net user"
KARCH=arm KARGS=ttyAMA0 VMLINUX=arch/arm/boot/zImage
KCONF=CPU_ARM926T,MMU,VFP,ARM_THUMB,AEABI,ARCH_VERSATILE,ATAGS,DEPRECATED_PARAM_STRUCT,ARM_ATAG_DTB_COMPAT,ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND,SERIAL_AMBA_PL011,SERIAL_AMBA_PL011_CONSOLE,RTC_CLASS,RTC_DRV_PL031,RTC_HCTOSYS,PCI,PCI_VERSATILE,BLK_DEV_SD,SCSI,SCSI_LOWLEVEL,SCSI_SYM53C8XX_2,SCSI_SYM53C8XX_MMIO,NET_VENDOR_REALTEK,8139CP
KERNEL_CONFIG="CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0"
DTB=arch/arm/boot/dts/versatile-pb.dtb
elif [ "$TARGET" == armv7l ] || [ "$TARGET" == aarch64 ]; then
if [ "$TARGET" == aarch64 ]; then
QEMU="aarch64 -M virt -cpu cortex-a57"
KARCH=arm64 VMLINUX=arch/arm64/boot/Image
else
QEMU="arm -M virt" KARCH=arm VMLINUX=arch/arm/boot/zImage
fi
KARGS=ttyAMA0
KCONF=MMU,ARCH_MULTI_V7,ARCH_VIRT,SOC_DRA7XX,ARCH_OMAP2PLUS_TYPICAL,ARCH_ALPINE,ARM_THUMB,VDSO,CPU_IDLE,ARM_CPUIDLE,KERNEL_MODE_NEON,SERIAL_AMBA_PL011,SERIAL_AMBA_PL011_CONSOLE,RTC_CLASS,RTC_HCTOSYS,RTC_DRV_PL031,NET_CORE,VIRTIO_MENU,VIRTIO_NET,PCI,PCI_HOST_GENERIC,VIRTIO_BLK,VIRTIO_PCI,VIRTIO_MMIO,ATA,ATA_SFF,ATA_BMDMA,ATA_PIIX,PATA_PLATFORM,PATA_OF_PLATFORM,ATA_GENERIC
elif [ "$TARGET" == hexagon ]; then
QEMU="hexagon -M comet" KARGS=ttyS0 VMLINUX=vmlinux
KARCH="hexagon LLVM_IAS=1" KCONF=SPI,SPI_BITBANG,IOMMU_SUPPORT
elif [ "$TARGET" == i486 ] || [ "$TARGET" == i686 ] ||
[ "$TARGET" == x86_64 ] || [ "$TARGET" == x32 ]; then
if [ "$TARGET" == i486 ]; then
QEMU="i386 -cpu 486 -global fw_cfg.dma_enabled=false" KCONF=M486
elif [ "$TARGET" == i686 ]; then
QEMU="i386 -cpu pentium3" KCONF=MPENTIUMII
else
QEMU=x86_64 KCONF=64BIT
[ "$TARGET" == x32 ] && KCONF=X86_X32
fi
KARCH=x86 KARGS=ttyS0 VMLINUX=arch/x86/boot/bzImage
KCONF=$KCONF,UNWINDER_FRAME_POINTER,PCI,BLK_DEV_SD,ATA,ATA_SFF,ATA_BMDMA,ATA_PIIX,NET_VENDOR_INTEL,E1000,SERIAL_8250,SERIAL_8250_CONSOLE,RTC_CLASS
elif [ "$TARGET" == m68k ]; then
QEMU="m68k -M q800" KARCH=m68k KARGS=ttyS0 VMLINUX=vmlinux
KCONF=MMU,M68040,M68KFPU_EMU,MAC,SCSI_MAC_ESP,MACINTOSH_DRIVERS,ADB,ADB_MACII,NET_CORE,MACSONIC,SERIAL_PMACZILOG,SERIAL_PMACZILOG_TTYS,SERIAL_PMACZILOG_CONSOLE
elif [ "$TARGET" == mips ] || [ "$TARGET" == mipsel ]; then
QEMU="mips -M malta" KARCH=mips KARGS=ttyS0 VMLINUX=vmlinux
KCONF=MIPS_MALTA,CPU_MIPS32_R2,SERIAL_8250,SERIAL_8250_CONSOLE,PCI,BLK_DEV_SD,ATA,ATA_SFF,ATA_BMDMA,ATA_PIIX,NET_VENDOR_AMD,PCNET32,POWER_RESET,POWER_RESET_SYSCON
[ "$TARGET" == mipsel ] && KCONF=$KCONF,CPU_LITTLE_ENDIAN &&
QEMU="mipsel -M malta"
elif [ "$TARGET" == powerpc ]; then
KARCH=powerpc QEMU="ppc -M g3beige" KARGS=ttyS0 VMLINUX=vmlinux
KCONF=ALTIVEC,PPC_PMAC,PPC_OF_BOOT_TRAMPOLINE,IDE,IDE_GD,IDE_GD_ATA,BLK_DEV_IDE_PMAC,BLK_DEV_IDE_PMAC_ATA100FIRST,MACINTOSH_DRIVERS,ADB,ADB_CUDA,NET_VENDOR_NATSEMI,NET_VENDOR_8390,NE2K_PCI,SERIO,SERIAL_PMACZILOG,SERIAL_PMACZILOG_TTYS,SERIAL_PMACZILOG_CONSOLE,BOOTX_TEXT
elif [ "$TARGET" == powerpc64le ]; then
KARCH=powerpc QEMU="ppc64 -M pseries -vga none" KARGS=hvc0
VMLINUX=vmlinux
KCONF=PPC64,PPC_PSERIES,CPU_LITTLE_ENDIAN,PPC_OF_BOOT_TRAMPOLINE,BLK_DEV_SD,SCSI_LOWLEVEL,SCSI_IBMVSCSI,ATA,NET_VENDOR_IBM,IBMVETH,HVC_CONSOLE,PPC_TRANSACTIONAL_MEM,PPC_DISABLE_WERROR,SECTION_MISMATCH_WARN_ONLY
elif [ "$TARGET" = s390x ]; then
QEMU="s390x" KARCH=s390 VMLINUX=arch/s390/boot/bzImage
KCONF=MARCH_Z900,PACK_STACK,NET_CORE,VIRTIO_NET,VIRTIO_BLK,SCLP_TTY,SCLP_CONSOLE,SCLP_VT220_TTY,SCLP_VT220_CONSOLE,S390_GUEST
elif [ "$TARGET" == sh2eb ]; then
KARCH=sh VMLINUX=vmlinux KERNEL_CONFIG='CONFIG_MEMORY_START=0x10000000
CONFIG_CMDLINE="console=ttyUL0 earlycon"' BUILTIN=1
KCONF=CPU_SUBTYPE_J2,CPU_BIG_ENDIAN,SH_JCORE_SOC,SMP,BINFMT_ELF_FDPIC,JCORE_EMAC,SERIAL_UARTLITE,SERIAL_UARTLITE_CONSOLE,HZ_100,CMDLINE_OVERWRITE,SPI,SPI_JCORE,MMC,PWRSEQ_SIMPLE,MMC_BLOCK,MMC_SPI
elif [ "$TARGET" == sh4 ]; then
QEMU="sh4 -M r2d -serial null -serial mon:stdio" KARCH=sh
KARGS="ttySC1 noiotrap" VMLINUX=arch/sh/boot/zImage
KERNEL_CONFIG="CONFIG_MEMORY_START=0x0c000000"
KCONF=CPU_SUBTYPE_SH7751R,MMU,VSYSCALL,SH_FPU,SH_RTS7751R2D,RTS7751R2D_PLUS,SERIAL_SH_SCI,SERIAL_SH_SCI_CONSOLE,PCI,NET_VENDOR_REALTEK,8139CP,PCI,BLK_DEV_SD,ATA,ATA_SFF,ATA_BMDMA,PATA_PLATFORM,BINFMT_ELF_FDPIC,BINFMT_FLAT
#see also SPI SPI_SH_SCI MFD_SM501 RTC_CLASS RTC_DRV_R9701 RTC_DRV_SH RTC_HCTOSYS
else die "Unknown \$TARGET $TARGET"
fi
# Write the qemu launch script
if [ -n "$QEMU" ]; then
[ -z "$BUILTIN" ] && INITRD="-initrd ${CROSS}root.cpio.gz"
echo qemu-system-"$QEMU" '"$@"' $QEMU_MORE -nographic -no-reboot -m 256 \
-kernel $(basename $VMLINUX) $INITRD \
"-append \"panic=1 HOST=$TARGET console=$KARGS \$KARGS\"" \
${DTB:+-dtb "$(basename "$DTB")"} > "$OUTPUT/qemu-$TARGET.sh" &&
chmod +x "$OUTPUT/qemu-$TARGET.sh" || exit 1
fi
announce "linux-$KARCH"
pushd "$LINUX" && make distclean && popd &&
cp -sfR "$LINUX" "$MYBUILD/linux" && pushd "$MYBUILD/linux" &&
sed -is '/select HAVE_STACK_VALIDATION/d' arch/x86/Kconfig && # Fix x86-64
sed -is 's/depends on !SMP/& || !MMU/' mm/Kconfig && # Fix sh2eb
# Write miniconfig
{ echo "# make ARCH=$KARCH allnoconfig KCONFIG_ALLCONFIG=$TARGET.miniconf"
echo -e "# make ARCH=$KARCH -j \$(nproc)\n# boot $VMLINUX\n\n"
echo "# CONFIG_EMBEDDED is not set"
# Expand list of =y symbols, first generic then architecture-specific
for i in BINFMT_ELF,BINFMT_SCRIPT,NO_HZ,HIGH_RES_TIMERS,BLK_DEV,BLK_DEV_INITRD,RD_GZIP,BLK_DEV_LOOP,EXT4_FS,EXT4_USE_FOR_EXT2,VFAT_FS,FAT_DEFAULT_UTF8,MISC_FILESYSTEMS,SQUASHFS,SQUASHFS_XATTR,SQUASHFS_ZLIB,DEVTMPFS,DEVTMPFS_MOUNT,TMPFS,TMPFS_POSIX_ACL,NET,PACKET,UNIX,INET,IPV6,NETDEVICES,NET_CORE,NETCONSOLE,ETHERNET,COMPAT_32BIT_TIME,EARLY_PRINTK,IKCONFIG,IKCONFIG_PROC $KCONF $KEXTRA ; do
echo "# architecture ${X:-independent}"
sed -E '/^$/d;s/([^,]*)($|,)/CONFIG_\1=y\n/g' <<< "$i"
X=specific
done
[ -n "$BUILTIN" ] && echo -e CONFIG_INITRAMFS_SOURCE="\"$OUTPUT/fs\""
echo "$KERNEL_CONFIG"
} > "$OUTPUT/miniconfig-$TARGET" &&
make ARCH=$KARCH allnoconfig KCONFIG_ALLCONFIG="$OUTPUT/miniconfig-$TARGET" &&
# Second config pass to remove stupid kernel defaults
# See http://lkml.iu.edu/hypermail/linux/kernel/1912.3/03493.html
sed -e 's/# CONFIG_EXPERT .*/CONFIG_EXPERT=y/' -e "$(sed -E -e '/^$/d' \
-e 's@([^,]*)($|,)@/^CONFIG_\1=y/d;$a# CONFIG_\1 is not set/\n@g' \
<<< VT,SCHED_DEBUG,DEBUG_MISC,X86_DEBUG_FPU)" -i .config &&
yes "" | make ARCH=$KARCH oldconfig > /dev/null &&
# Build kernel. Copy config, device tree binary, and kernel binary to output
make ARCH=$KARCH CROSS_COMPILE="$CROSS_COMPILE" -j $(nproc) &&
cp .config "$OUTPUT/linux-fullconfig" || exit 1
[ -n "$DTB" ] && { cp "$DTB" "$OUTPUT" || exit 1 ;}
cp "$VMLINUX" "$OUTPUT" && cd .. && rm -rf linux && popd || exit 1
fi
# clean up and package root filesystem for initramfs.
if [ -z "$BUILTIN" ]; then
announce "${CROSS}root.cpio.gz"
(cd "$ROOT" && find . | cpio -o -H newc ${CROSS_COMPILE:+--no-preserve-owner}\
| gzip) > "$OUTPUT/$CROSS"root.cpio.gz || exit 1
fi
mv "$LOG/$CROSS".{n,y}
rmdir "$MYBUILD" "$BUILD" 2>/dev/null || exit 0 # remove if empty, not an error