syzbot system continuously fuzzes main Linux kernel branches and automatically reports found bugs to kernel mailing lists. syzbot dashboard shows current statuses of bugs. All
syzbot-reported bugs are also CCed to syzkaller-bugs mailing list. Direct all questions to
syzbot needs to know when a bug is fixed in order to (1) verify that it is in fact fixed and (2) be able to report other similarly-looking crashes (while a bug is considered open all similarly-looking crashes are merged into the existing bug). To understand when a bug is fixed
syzbot needs to know what commit fixes the bug; once
syzbot knows the commit it will track when the commit reaches all kernel builds on all tracked branches. Only when the commit reaches all builds, the bug is considered closed (new similarly-looking crashes create a new bug).
If you fix a bug reported by
syzbot, please add the provided
Reported-by tag to the commit (
Tested-by tags with the
syzbot+HASH address are recognized as well). You can also communicate with
syzbot by replying to its emails. The commands are:
#syz fix: exact-commit-title
It‘s enough that the commit is merged into any tree or you are reasonably sure about its final title, in particular, you don’t need to wait for the commit to be merged into upstream tree.
syzbot only needs to know the title by which it will appear in tested trees. In case of an error or a title change, you can override the commit simply by sending another
#syz fix command.
#syz dup: exact-subject-of-another-report
Note: if the crash happens again, it will cause creation of a new bug report.
Note: all commands must start from beginning of the line.
Note: please keep
email@example.com mailing list in CC. It serves as a history of what happened with each bug report.
syzbot can test patches for bugs with reproducers. This can be used for testing of fix patches, or just for debugging (i.e. adding additional checks to code and testing with them), or to check if the bug still happens. To test on a particular git tree and branch reply with:
#syz test: git://repo/address.git branch
or alternatively, to test on exact commit reply with:
#syz test: git://repo/address.git commit-hash
If you also provide a patch with the email,
syzbot will apply it on top of the tree before testing. The patch can be provided either inline in email text or as a text attachment (which is more reliable if your email client messes with whitespaces).
If you don't provide a patch,
syzbot will test the tree as is. This is useful if this is your own tree which already contains the patch, or to check if the bug is already fixed by some recent commit.
After sending an email you should get a reply email with results within an hour.
Note: you may send the request only to
syzbot email address, as patches sent to some mailing lists (e.g. netdev, netfilter-devel) will trigger patchwork.
Note: see below for testing
syzbot bisects bugs with reproducers to find commit that introduced the bug.
syzbot starts with the commit on which the bug was discovered, ensures that it can reproduce the bug and then goes back release-by-release to find the first release where kernel does not crash. Once such release is found,
syzbot starts bisection on that range.
syzbot has limitation of how far back in time it can go (currently
v4.1), going back in time is very hard because of incompatible compiler/linker/asm/perl/make/libc/etc, kernel build/boot breakages and large amounts of bugs.
The predicate for bisection is binary (crash/doesn't crash),
syzbot does not look at the exact crash and does not try to differentiate them. This is intentional because lots of bugs can manifest in different ways (sometimes 50+ different ways). For each revision
syzbot repeats testing 10 times and a single crash marks revision as bad (lots of bugs are due to races and are hard to trigger).
syzbot uses different compilers depending on kernel revision (a single compiler can't build all revisions). These compilers are available here. Exact compiler used to test a particular revision is specified in the bisection log.
Bisection is best-effort and may not find the right commit for multiple reasons, including:
A single incorrect decision during bisection leads to an incorrect result, so please treat the results with understanding. You may consult the provided
bisection log to see how/why
syzbot has arrived to a particular commit. Suggestions and patches that improve bisection quality for common cases are welcome.
syzbot aims at providing stand-alone C reproducers for all reported bugs. However, sometimes it can't extract a reproducer at all, or can only extract a syzkaller reproducer. syzkaller reproducers are programs in a special syzkaller notation and they can be executed on the target system with a little bit more effort. See this for instructions.
A syskaller program can also give you an idea as to what syscalls with what arguments were executed (note that some calls can actually be executed in parallel).
A syzkaller program can be converted to an almost equivalent C source using
syz-prog2c has lots of flags in common with syz-execprog, e.g.
-collide which control if the syscalls are executed sequentially or in parallel. An example invocation:
syz-prog2c -prog repro.syz.txt -enable=all -threaded -collide -repeat -procs=8 -sandbox=namespace -segv -tmpdir -waitrepeat
However, note that if
syzbot did not provide a C reproducer, it wasn't able to trigger the bug using the C program (though, it can be just because the bug is triggered by a subtle race condition).
If the provided reproducer does not work for you, most likely it is related to the fact that you have slightly different setup than
syzbot has obtained the provided crash report on the provided reproducer on a freshly-booted machine, so the reproducer worked for it somehow.
Note: if the report contains
userspace arch: i386, then the program needs to be built with
syzbot uses GCE VMs for testing, but usually it is not important.
If the reproducer exits quickly, try to run it several times, or in a loop. There can be some races involved.
Exact compilers used by
syzbot can be found here:
qemu-system-x86_64 -smp 2 -m 4G -enable-kvm -cpu host \ -net nic -net user,hostfwd=tcp::10022-:22 \ -kernel arch/x86/boot/bzImage -nographic \ -device virtio-scsi-pci,id=scsi \ -device scsi-hd,bus=scsi.0,drive=d0 \ -drive file=wheezy.img,format=raw,if=none,id=d0 \ -append "root=/dev/sda console=ttyS0 earlyprintk=serial rodata=n \ oops=panic panic_on_warn=1 panic=86400 kvm-intel.nested=1 \ security=apparmor ima_policy=tcb workqueue.watchdog_thresh=140 \ nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 \ nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 \ nf-conntrack-sane.ports=20000 vivid.n_devs=16 \ vivid.multiplanar=1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2 \ spec_store_bypass_disable=prctl nopcid"
And then you can ssh into it using:
ssh -p 10022 -i wheezy.id_rsa root@localhost
Reproducers are best-effort.
syzbot always tries to create reproducers, and once it has one it adds it to the bug. If there is no reproducer referenced in a bug, a reproducer does not exist. There are multiple reasons why
syzbot can fail to create a reproducer: some crashes are caused by subtle races and are very hard to reproduce in general; some crashes are caused by global accumulated state in kernel (e.g. lockdep reports); some crashes are caused by non-reproducible coincidences (e.g. an integer
0x12345 happened to reference an existing IPC object) and there is long tail of other reasons.
Bugs with reproducers are automatically reported to kernel mailing lists. Bugs without reproducers are first staged in moderation queue to filter out invalid, unactionable or duplicate reports. Staged bugs are shown on dashboard in moderation section and mailed to syzkaller-upstream-moderation mailing list. Staged bugs accept all commands supported for reported bugs (
invalid) with a restriction that bugs reported upstream can't be
dup-ed onto bugs in moderation queue. Additionally, staged bugs accept upstream command:
which sends the bug to kernel mailing lists.
KMSAN is a dynamic, compiler-based tool (similar to
KASAN) that detects uses of uninitialized values. As compared to (now deleted)
KMEMCHECK which simply detected loads of non-stored-to memory,
KMSAN tracks precise propagation of uninitialized values through memory and registers and only flags actual eventual uses of uninitialized values. For example,
KMSAN will detect a branch on or a
copy_to_user() of values that transitively come from uninitialized memory created by heap/stack allocations. This ensures /theoretical/ absense of both false positives and false negatives (with some implementation limitations of course). Note that
KMSAN is not upstream yet, though, we want to upstream it later. For now, it lives in github.com/google/kmsan and is based on a reasonably fresh upstream tree. As the result, any patch testing requests for
KMSAN bugs need to go to
KMSAN tree (
master branch). A standard way for triggering the test with
KMSAN tree is to send an email to
syzbot+HASH address containing the following line:
#syz test: https://github.com/google/kmsan.git master
and attach/inline your test patch in the same email.
Report explanation. The first call trace points to the
use of the uninit value (which is usually a branching or copying it to userspace). Then there are 0 or more “Uninit was stored to memory at:” stacks which denote how the unint value travelled through memory. Finally there is a “Uninit was created at:” section which points either to a heap allocation or a stack variable which is the original source of uninitialized-ness.
syzbot can test patches that fix bugs, it does not support applying custom patches during fuzzing. It always tests vanilla unmodified git trees. There are several reasons for this:
We've experimented with application of custom patches in the past and it lead to unrecoverable mess. If you want
syzbot to pick up patches sooner, ask tree maintainers for priority handling.
However, syzbot kernel config always includes
CONFIG_DEBUG_AID_FOR_SYZBOT=y setting, which is not normally present in kernel. What was used for particularly elusive bugs in the past is temporary merging some additional debugging code into
linux-next under this config setting (e.g. more debug checks and/or debug output) and waiting for new crash reports from syzbot.
Kernel configs, sysctls and command line arguments that
syzbot uses are available in /dashboard/config.
Yes, it is here.