blob: 16e6479cdc2ec99c6e321b0eaca02af4ca001ec9 [file] [log] [blame]
/*----------------------------------------------------------------------------
*
* File:
* eas_mdls.h
*
* Contents and purpose:
* Declarations, interfaces, and prototypes for eas_mdls.c
*
* Copyright Sonic Network Inc. 2004
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
*----------------------------------------------------------------------------
*/
#ifndef _EAS_MDLS_H
#define _EAS_MDLS_H
/*------------------------------------
* includes
*------------------------------------
*/
#include "eas_data.h"
/*------------------------------------
* Some defines for dls.h
*------------------------------------
*/
#ifndef DWORD
#define DWORD EAS_I32
#define FAR
#define SHORT EAS_I16
#define USHORT EAS_U16
#define LONG EAS_I32
#define ULONG EAS_U32
#endif
/* GUID struct (call it DLSID in case GUID is defined elsewhere) */
typedef struct
{
EAS_U32 Data1;
EAS_U16 Data2;
EAS_U16 Data3;
EAS_U8 Data4[8];
} DLSID;
#define DEFINE_DLSID(name, l, w1, w2, b1, b2, b3, b4, b5, b6, b7, b8) const DLSID name = { l, w1, w2, { b1, b2, b3, b4, b5, b6, b7, b8 } }
/*------------------------------------
* defines
*------------------------------------
*/
/* maximum sample memory for DLS query support */
#ifndef MAX_DLS_MEMORY
#define MAX_DLS_MEMORY 65536
#endif
/* size of conditional chunk stack */
#ifndef CDL_STACK_SIZE
#define CDL_STACK_SIZE 8
#endif
/* size of read buffer for sample conversion */
#ifndef SAMPLE_CONVERT_CHUNK_SIZE
#define SAMPLE_CONVERT_CHUNK_SIZE 32
#endif
#define ZERO_TIME_IN_CENTS -32768
/* Pan calculation macros */
#define PAN_CONVERSION_FACTOR 4129
#define MAX_PAN_VALUE 63
#define MIN_PAN_VALUE -63
/* multiplier to convert time cents to 10-bit fraction log for EAS_LogToLinear16 */
#define TIME_CENTS_TO_LOG2 27962
/* conversion factor sustain level from percent to exponent for LogToLinear16 */
#define SUSTAIN_LOG_CONVERSION_FACTOR 536871
#define SUSTAIN_LOG_CONVERSION_SHIFT 15
/* conversion factor sustain level from percent to EG full scale */
#define SUSTAIN_LINEAR_CONVERSION_FACTOR 1073709
/* conversion factor to convert frame period to decay rate */
#define DECAY_CONVERSION_FACTOR -16
/*----------------------------------------------------------------------------
* These macros define the various characteristics of the defined sample rates
*----------------------------------------------------------------------------
* DLS_ATTACK_TIME_CONVERT log offset for conversion from time cents to attack rate
* DLS_LFO_FREQUENCY_CONVERT pitch-cents offset for LFO frequency conversion
*----------------------------------------------------------------------------
*/
#if defined (_SAMPLE_RATE_8000)
#define DLS_RATE_CONVERT -9559
#define DLS_LFO_FREQUENCY_CONVERT 5921
#elif defined (_SAMPLE_RATE_16000)
#define DLS_RATE_CONVERT -9559
#define DLS_LFO_FREQUENCY_CONVERT 5921
#elif defined (_SAMPLE_RATE_20000)
#define DLS_RATE_CONVERT -8745
#define DLS_LFO_FREQUENCY_CONVERT 5108
#elif defined (_SAMPLE_RATE_22050)
#define DLS_RATE_CONVERT -8914
#define DLS_LFO_FREQUENCY_CONVERT 5277
#elif defined (_SAMPLE_RATE_24000)
#define DLS_RATE_CONVERT -9061
#define DLS_LFO_FREQUENCY_CONVERT 5423
#elif defined (_SAMPLE_RATE_32000)
#define DLS_RATE_CONVERT -9559
#define DLS_LFO_FREQUENCY_CONVERT 5921
#elif defined (_SAMPLE_RATE_44100)
#define DLS_RATE_CONVERT -8914
#define DLS_LFO_FREQUENCY_CONVERT 5277
#elif defined (_SAMPLE_RATE_48000)
#define DLS_RATE_CONVERT -9061
#define DLS_LFO_FREQUENCY_CONVERT 5423
#else
#error "_SAMPLE_RATE_XXXXX must be defined to valid rate"
#endif
/*
* FILTER_Q_CONVERSION_FACTOR convers the 0.1dB steps in the DLS
* file to our internal 0.75 dB steps. The value is calculated
* as follows:
*
* 32768 / (10 * <step-size in dB>)
*
* FILTER_RESONANCE_NUM_ENTRIES is the number of entries in the table
*/
#define FILTER_Q_CONVERSION_FACTOR 4369
#define FILTER_RESONANCE_NUM_ENTRIES 31
/*
* Multiplier to convert DLS gain units (10ths of a dB) to a
* power-of-two exponent for conversion to linear gain using our
* piece-wise linear approximator. Note that we ignore the lower
* 16-bits of the DLS gain value. The result is a 10-bit fraction
* that works with the EAS_LogToLinear16 function.
*
* DLS_GAIN_FACTOR = (2^18) / (200 * log10(2))
*/
#define DLS_GAIN_FACTOR 4354
#define DLS_GAIN_SHIFT 8
/*
* Reciprocal of 10 for quick divide by 10's
*
* DLS_GAIN_FACTOR = (2^18) / (200 * log10(2))
*/
#define DLS_DIV_10_FACTOR 3277
#define DLS_DIV_10_SHIFT 16
/*
* Multiplier to convert DLS time cents units to a power-of-two
* exponent for conversion to absolute time units using our
* piece-wise linear approximator.
*
* DLS_TIME_FACTOR = (2^22) / 1200
*/
#define DLS_TIME_FACTOR 3495
#define DLS_TIME_SHIFT 22
/* LFO limits */
#define MAX_LFO_FREQUENCY_IN_HERTZ 20
#define MIN_LFO_FREQUENCY_IN_HERTZ 0.1
#define MAX_LFO_FREQUENCY_IN_PITCHCENTS 1549
#define MIN_LFO_FREQUENCY_IN_PITCHCENTS -7624
#define MAX_LFO_AMPLITUDE_DEPTH 12 /* in dB, DLS2.1 p 31*/
#define MIN_LFO_AMPLITUDE_DEPTH -12 /* in dB, DLS2.1 p 31*/
/* add to pitch cents before pow(2.0, n) to convert to frequency */
#define ABSOLUTE_PITCH_BIAS 238395828
#define A5_PITCH_OFFSET 6900
/*
CHUNK_TYPE is a macro that converts the 4 input args into a 32-bit int
where
argument a is placed at the MSB location and
argument d is placed at the LSB location.
This is useful for determining the DLS chunk types
*/
#define CHUNK_TYPE(a,b,c,d) ( \
( ((EAS_U32)(a) & 0xFF) << 24 ) \
+ ( ((EAS_U32)(b) & 0xFF) << 16 ) \
+ ( ((EAS_U32)(c) & 0xFF) << 8 ) \
+ ( ((EAS_U32)(d) & 0xFF) ) )
#define CHUNK_RIFF CHUNK_TYPE('R','I','F','F')
#define CHUNK_DLS CHUNK_TYPE('D','L','S',' ')
#define CHUNK_CDL CHUNK_TYPE('c','d','l',' ')
#define CHUNK_VERS CHUNK_TYPE('v','e','r','s')
#define CHUNK_DLID CHUNK_TYPE('d','l','i','d')
#define CHUNK_LIST CHUNK_TYPE('L','I','S','T')
#define CHUNK_COLH CHUNK_TYPE('c','o','l','h')
#define CHUNK_LINS CHUNK_TYPE('l','i','n','s')
#define CHUNK_PTBL CHUNK_TYPE('p','t','b','l')
#define CHUNK_WVPL CHUNK_TYPE('w','v','p','l')
#define CHUNK_INFO CHUNK_TYPE('I','N','F','O')
#define CHUNK_INAM CHUNK_TYPE('I','N','A','M')
#define CHUNK_INS CHUNK_TYPE('i','n','s',' ')
#define CHUNK_INSH CHUNK_TYPE('i','n','s','h')
#define CHUNK_LRGN CHUNK_TYPE('l','r','g','n')
#define CHUNK_RGN CHUNK_TYPE('r','g','n',' ')
#define CHUNK_RGN2 CHUNK_TYPE('r','g','n','2')
#define CHUNK_RGNH CHUNK_TYPE('r','g','n','h')
#define CHUNK_WSMP CHUNK_TYPE('w','s','m','p')
#define CHUNK_WLNK CHUNK_TYPE('w','l','n','k')
#define CHUNK_LART CHUNK_TYPE('l','a','r','t')
#define CHUNK_LAR2 CHUNK_TYPE('l','a','r','2')
#define CHUNK_ART1 CHUNK_TYPE('a','r','t','1')
#define CHUNK_ART2 CHUNK_TYPE('a','r','t','2')
#define CHUNK_WAVE CHUNK_TYPE('w','a','v','e')
#define CHUNK_FMT CHUNK_TYPE('f','m','t',' ')
#define CHUNK_DATA CHUNK_TYPE('d','a','t','a')
#define CHUNK_DMPR CHUNK_TYPE('d','m','p','r')
#define WAVE_FORMAT_PCM 0x0001 /* Microsoft PCM format, see DLS2.1 p60 */
#define WAVE_FORMAT_EXTENSIBLE 0xffff
/* defines for wave table structures */
/* initialize each articulation structure to a harmless state */
/* change art values after we've determined EAS internals */
#define DEFAULT_DLS_FILTER_CUTOFF_FREQUENCY 0x7FFF /* DLS2.1, p 31 means leave filter off */
/**********/
/* define the waves that we expect to generate instead of store */
/* NOTE: our comparison routine converts the input string
to lowercase, so the following comparison values should all
be in lowercase.
*/
#define STRING_NOISE "noise"
/*------------------------------------
* type definitions
*------------------------------------
*/
#ifdef _STANDALONE_CONVERTER
typedef struct s_dls_params
{
EAS_INT sampleRate;
EAS_INT samplesPerFrame;
EAS_INT bitDepth;
double ditherLevel;
double ditherFilterCoeff;
EAS_BOOL compatibility;
EAS_BOOL encodeADPCM;
} S_DLS_PARAMS;
#endif
/* function prototypes */
EAS_RESULT DLSParser (EAS_HW_DATA_HANDLE hwInstData, EAS_FILE_HANDLE fileHandle, EAS_I32 offset, S_DLS **pDLS);
EAS_RESULT DLSCleanup (EAS_HW_DATA_HANDLE hwInstData, S_DLS *pDLS);
void DLSAddRef (S_DLS *pDLS);
EAS_I16 ConvertDelay (EAS_I32 timeCents);
EAS_I16 ConvertRate (EAS_I32 timeCents);
#ifdef _STANDALONE_CONVERTER
void DLSConvParams (S_DLS_PARAMS *pParams, EAS_BOOL set);
#endif
#endif