# Welcome to the PyTorch setup.py.
#
# Environment variables you are probably interested in:
#
#   DEBUG
#     build with -O0 and -g (debug symbols)
#
#   REL_WITH_DEB_INFO
#     build with optimizations and -g (debug symbols)
#
#   MAX_JOBS
#     maximum number of compile jobs we should use to compile your code
#
#   NO_CUDA
#     disables CUDA build
#
#   CFLAGS
#     flags to apply to both C and C++ files to be compiled (a quirk of setup.py
#     which we have faithfully adhered to in our build system is that CFLAGS
#     also applies to C++ files, in contrast to the default behavior of autogoo
#     and cmake build systems.)
#
#   CC
#     the C/C++ compiler to use (NB: the CXX flag has no effect for distutils
#     compiles, because distutils always uses CC to compile, even for C++
#     files.
#
# Environment variables for feature toggles:
#
#   NO_CUDNN
#     disables the cuDNN build
#
#   NO_FBGEMM
#     disables the FBGEMM build
#
#   NO_TEST
#     disables the test build
#
#   NO_MIOPEN
#     disables the MIOpen build
#
#   NO_MKLDNN
#     disables use of MKLDNN
#
#   NO_NNPACK
#     disables NNPACK build
#
#   NO_QNNPACK
#     disables QNNPACK build (quantized 8-bit operators)
#
#   NO_DISTRIBUTED
#     disables distributed (c10d, gloo, mpi, etc.) build
#
#   NO_SYSTEM_NCCL
#     disables use of system-wide nccl (we will use our submoduled
#     copy in third_party/nccl)
#
#   NO_CAFFE2_OPS
#     disable Caffe2 operators build
#
#   USE_GLOO_IBVERBS
#     toggle features related to distributed support
#
#   USE_OPENCV
#     enables use of OpenCV for additional operators
#
#   USE_FFMPEG
#     enables use of ffmpeg for additional operators
#
#   USE_LEVELDB
#     enables use of LevelDB for storage
#
#   USE_LMDB
#     enables use of LMDB for storage
#
#   BUILD_BINARY
#     enables the additional binaries/ build
#
#   PYTORCH_BUILD_VERSION
#   PYTORCH_BUILD_NUMBER
#     specify the version of PyTorch, rather than the hard-coded version
#     in this file; used when we're building binaries for distribution
#
#   TORCH_CUDA_ARCH_LIST
#     specify which CUDA architectures to build for.
#     ie `TORCH_CUDA_ARCH_LIST="6.0;7.0"`
#     These are not CUDA versions, instead, they specify what
#     classes of NVIDIA hardware we should generate PTX for.
#
#   ONNX_NAMESPACE
#     specify a namespace for ONNX built here rather than the hard-coded
#     one in this file; needed to build with other frameworks that share ONNX.
#
#   BLAS
#     BLAS to be used by Caffe2. Can be MKL, Eigen, ATLAS, or OpenBLAS. If set
#     then the build will fail if the requested BLAS is not found, otherwise
#     the BLAS will be chosen based on what is found on your system.
#
#   USE_FBGEMM
#     Enables use of FBGEMM
#
#   USE_REDIS
#     Whether to use Redis for distributed workflows (Linux only)
#
#   USE_ZSTD
#     Enables use of ZSTD, if the libraries are found
#
# Environment variables we respect (these environment variables are
# conventional and are often understood/set by other software.)
#
#   CUDA_HOME (Linux/OS X)
#   CUDA_PATH (Windows)
#     specify where CUDA is installed; usually /usr/local/cuda or
#     /usr/local/cuda-x.y
#   CUDAHOSTCXX
#     specify a different compiler than the system one to use as the CUDA
#     host compiler for nvcc.
#
#   CUDA_NVCC_EXECUTABLE
#     Specify a NVCC to use. This is used in our CI to point to a cached nvcc
#
#   CUDNN_LIB_DIR
#   CUDNN_INCLUDE_DIR
#   CUDNN_LIBRARY
#     specify where cuDNN is installed
#
#   MIOPEN_LIB_DIR
#   MIOPEN_INCLUDE_DIR
#   MIOPEN_LIBRARY
#     specify where MIOpen is installed
#
#   NCCL_ROOT_DIR
#   NCCL_LIB_DIR
#   NCCL_INCLUDE_DIR
#     specify where nccl is installed
#
#   NVTOOLSEXT_PATH (Windows only)
#     specify where nvtoolsext is installed
#
#   LIBRARY_PATH
#   LD_LIBRARY_PATH
#     we will search for libraries in these paths

from __future__ import print_function
from setuptools import setup, Extension, distutils, Command, find_packages
from distutils import dir_util
import setuptools.command.build_ext
import setuptools.command.install
import distutils.command.clean
import distutils.sysconfig
import filecmp
import platform
import subprocess
import shutil
import sys
import os
import json
import glob
import importlib

from tools.build_pytorch_libs import build_caffe2
from tools.setup_helpers.env import (IS_WINDOWS, IS_DARWIN, IS_LINUX,
                                     check_env_flag,
                                     DEBUG, REL_WITH_DEB_INFO, USE_MKLDNN)
from tools.setup_helpers.cuda import USE_CUDA, CUDA_HOME, CUDA_VERSION
from tools.setup_helpers.cudnn import USE_CUDNN, CUDNN_LIBRARY, CUDNN_INCLUDE_DIR
from tools.setup_helpers.rocm import USE_ROCM
from tools.setup_helpers.miopen import USE_MIOPEN, MIOPEN_LIBRARY, MIOPEN_INCLUDE_DIR
from tools.setup_helpers.nccl import USE_NCCL, USE_SYSTEM_NCCL, NCCL_SYSTEM_LIB, NCCL_INCLUDE_DIR
from tools.setup_helpers.dist_check import USE_DISTRIBUTED
################################################################################
# Parameters parsed from environment
################################################################################

VERBOSE_SCRIPT = True
RUN_BUILD_DEPS = True
# see if the user passed a quiet flag to setup.py arguments and respect
# that in our parts of the build
EMIT_BUILD_WARNING = False
RERUN_CMAKE = False
filtered_args = []
for i, arg in enumerate(sys.argv):
    if arg == '--cmake':
        RERUN_CMAKE = True
        continue
    if arg == 'rebuild' or arg == 'build':
        arg = 'build'  # rebuild is gone, make it build
        EMIT_BUILD_WARNING = True
    if arg == "--":
        filtered_args += sys.argv[i:]
        break
    if arg == '-q' or arg == '--quiet':
        VERBOSE_SCRIPT = False
    if arg == 'clean':
        RUN_BUILD_DEPS = False
    filtered_args.append(arg)
sys.argv = filtered_args

if VERBOSE_SCRIPT:
    def report(*args):
        print(*args)
else:
    def report(*args):
        pass

# Constant known variables used throughout this file
cwd = os.path.dirname(os.path.abspath(__file__))
lib_path = os.path.join(cwd, "torch", "lib")
third_party_path = os.path.join(cwd, "third_party")
caffe2_build_dir = os.path.join(cwd, "build")
# lib/pythonx.x/site-packages
rel_site_packages = distutils.sysconfig.get_python_lib(prefix='')
# full absolute path to the dir above
full_site_packages = distutils.sysconfig.get_python_lib()
# CMAKE: full path to python library
if IS_WINDOWS:
    cmake_python_library = "{}/libs/python{}.lib".format(
        distutils.sysconfig.get_config_var("prefix"),
        distutils.sysconfig.get_config_var("VERSION"))
else:
    cmake_python_library = "{}/{}".format(
        distutils.sysconfig.get_config_var("LIBDIR"),
        distutils.sysconfig.get_config_var("INSTSONAME"))
cmake_python_include_dir = distutils.sysconfig.get_python_inc()


################################################################################
# Version, create_version_file, and package_name
################################################################################
package_name = os.getenv('TORCH_PACKAGE_NAME', 'torch')
version = '1.1.0a0'
if os.getenv('PYTORCH_BUILD_VERSION'):
    assert os.getenv('PYTORCH_BUILD_NUMBER') is not None
    build_number = int(os.getenv('PYTORCH_BUILD_NUMBER'))
    version = os.getenv('PYTORCH_BUILD_VERSION')
    if build_number > 1:
        version += '.post' + str(build_number)
else:
    try:
        sha = subprocess.check_output(['git', 'rev-parse', 'HEAD'], cwd=cwd).decode('ascii').strip()
        version += '+' + sha[:7]
    except Exception:
        pass
report("Building wheel {}-{}".format(package_name, version))


# all the work we need to do _before_ setup runs
def build_deps():
    report('-- Building version ' + version)
    version_path = os.path.join(cwd, 'torch', 'version.py')
    with open(version_path, 'w') as f:
        f.write("__version__ = '{}'\n".format(version))
        # NB: This is not 100% accurate, because you could have built the
        # library code with DEBUG, but csrc without DEBUG (in which case
        # this would claim to be a release build when it's not.)
        f.write("debug = {}\n".format(repr(DEBUG)))
        f.write("cuda = {}\n".format(repr(CUDA_VERSION)))

    def check_file(f):
        if not os.path.exists(f):
            report("Could not find {}".format(f))
            report("Did you run 'git submodule update --init --recursive'?")
            sys.exit(1)

    check_file(os.path.join(third_party_path, "gloo", "CMakeLists.txt"))
    check_file(os.path.join(third_party_path, "pybind11", "CMakeLists.txt"))
    check_file(os.path.join(third_party_path, 'cpuinfo', 'CMakeLists.txt'))
    check_file(os.path.join(third_party_path, 'onnx', 'CMakeLists.txt'))
    check_file(os.path.join(third_party_path, 'QNNPACK', 'CMakeLists.txt'))
    check_file(os.path.join(third_party_path, 'fbgemm', 'CMakeLists.txt'))

    check_pydep('yaml', 'pyyaml')
    check_pydep('typing', 'typing')

    build_caffe2(version=version,
                 cmake_python_library=cmake_python_library,
                 build_python=True,
                 rerun_cmake=RERUN_CMAKE,
                 build_dir='build')

    # Use copies instead of symbolic files.
    # Windows has very poor support for them.
    sym_files = ['tools/shared/cwrap_common.py', 'tools/shared/_utils_internal.py']
    orig_files = ['aten/src/ATen/common_with_cwrap.py', 'torch/_utils_internal.py']
    for sym_file, orig_file in zip(sym_files, orig_files):
        same = False
        if os.path.exists(sym_file):
            if filecmp.cmp(sym_file, orig_file):
                same = True
            else:
                os.remove(sym_file)
        if not same:
            shutil.copyfile(orig_file, sym_file)

    dir_util.copy_tree('third_party/pybind11/include/pybind11/',
                       'torch/include/pybind11')

################################################################################
# Building dependent libraries
################################################################################

missing_pydep = '''
Missing build dependency: Unable to `import {importname}`.
Please install it via `conda install {module}` or `pip install {module}`
'''.strip()


def check_pydep(importname, module):
    try:
        importlib.import_module(importname)
    except ImportError:
        raise RuntimeError(missing_pydep.format(importname=importname, module=module))


class build_ext(setuptools.command.build_ext.build_ext):
    def run(self):
        # report build options
        if USE_NUMPY:
            report('-- Building with NumPy bindings')
        else:
            report('-- NumPy not found')
        if USE_CUDNN:
            report('-- Detected cuDNN at ' + CUDNN_LIBRARY + ', ' + CUDNN_INCLUDE_DIR)
        else:
            report('-- Not using cuDNN')
        if USE_MIOPEN:
            report('-- Detected MIOpen at ' + MIOPEN_LIBRARY + ', ' + MIOPEN_INCLUDE_DIR)
        else:
            report('-- Not using MIOpen')
        if USE_CUDA:
            report('-- Detected CUDA at ' + CUDA_HOME)
        else:
            report('-- Not using CUDA')
        if USE_MKLDNN:
            report('-- Using MKLDNN')
        else:
            report('-- Not using MKLDNN')
        if USE_NCCL and USE_SYSTEM_NCCL:
            report('-- Using system provided NCCL library at ' + NCCL_SYSTEM_LIB + ', ' + NCCL_INCLUDE_DIR)
        elif USE_NCCL:
            report('-- Building NCCL library')
        else:
            report('-- Not using NCCL')
        if USE_DISTRIBUTED:
            report('-- Building with THD distributed package ')
            if IS_LINUX:
                report('-- Building with c10d distributed package ')
            else:
                report('-- Building without c10d distributed package')
        else:
            report('-- Building without distributed package')

        # It's an old-style class in Python 2.7...
        setuptools.command.build_ext.build_ext.run(self)

        # Copy the essential export library to compile C++ extensions.
        if IS_WINDOWS:
            build_temp = self.build_temp

            ext_filename = self.get_ext_filename('_C')
            lib_filename = '.'.join(ext_filename.split('.')[:-1]) + '.lib'

            export_lib = os.path.join(
                build_temp, 'torch', 'csrc', lib_filename).replace('\\', '/')

            build_lib = self.build_lib

            target_lib = os.path.join(
                build_lib, 'torch', 'lib', '_C.lib').replace('\\', '/')

            self.copy_file(export_lib, target_lib)

    def build_extensions(self):
        self.create_compile_commands()
        # The caffe2 extensions are created in
        # tmp_install/lib/pythonM.m/site-packages/caffe2/python/
        # and need to be copied to build/lib.linux.... , which will be a
        # platform dependent build folder created by the "build" command of
        # setuptools. Only the contents of this folder are installed in the
        # "install" command by default.
        # We only make this copy for Caffe2's pybind extensions
        caffe2_pybind_exts = [
            'caffe2.python.caffe2_pybind11_state',
            'caffe2.python.caffe2_pybind11_state_gpu',
            'caffe2.python.caffe2_pybind11_state_hip',
        ]
        i = 0
        while i < len(self.extensions):
            ext = self.extensions[i]
            if ext.name not in caffe2_pybind_exts:
                i += 1
                continue
            fullname = self.get_ext_fullname(ext.name)
            filename = self.get_ext_filename(fullname)
            report("\nCopying extension {}".format(ext.name))

            src = os.path.join("torch", rel_site_packages, filename)
            if not os.path.exists(src):
                report("{} does not exist".format(src))
                del self.extensions[i]
            else:
                dst = os.path.join(os.path.realpath(self.build_lib), filename)
                report("Copying {} from {} to {}".format(ext.name, src, dst))
                dst_dir = os.path.dirname(dst)
                if not os.path.exists(dst_dir):
                    os.makedirs(dst_dir)
                self.copy_file(src, dst)
                i += 1
        distutils.command.build_ext.build_ext.build_extensions(self)

    def get_outputs(self):
        outputs = distutils.command.build_ext.build_ext.get_outputs(self)
        outputs.append(os.path.join(self.build_lib, "caffe2"))
        report("setup.py::get_outputs returning {}".format(outputs))
        return outputs

    def create_compile_commands(self):
        def load(filename):
            with open(filename) as f:
                return json.load(f)
        ninja_files = glob.glob('build/*compile_commands.json')
        cmake_files = glob.glob('torch/lib/build/*/compile_commands.json')
        all_commands = [entry
                        for f in ninja_files + cmake_files
                        for entry in load(f)]

        # cquery does not like c++ compiles that start with gcc.
        # It forgets to include the c++ header directories.
        # We can work around this by replacing the gcc calls that python
        # setup.py generates with g++ calls instead
        for command in all_commands:
            if command['command'].startswith("gcc "):
                command['command'] = "g++ " + command['command'][4:]

        new_contents = json.dumps(all_commands, indent=2)
        contents = ''
        if os.path.exists('compile_commands.json'):
            with open('compile_commands.json', 'r') as f:
                contents = f.read()
        if contents != new_contents:
            with open('compile_commands.json', 'w') as f:
                f.write(new_contents)


class install(setuptools.command.install.install):
    def run(self):
        setuptools.command.install.install.run(self)


class clean(distutils.command.clean.clean):
    def run(self):
        import glob
        import re
        with open('.gitignore', 'r') as f:
            ignores = f.read()
            pat = re.compile(r'^#( BEGIN NOT-CLEAN-FILES )?')
            for wildcard in filter(None, ignores.split('\n')):
                match = pat.match(wildcard)
                if match:
                    if match.group(1):
                        # Marker is found and stop reading .gitignore.
                        break
                    # Ignore lines which begin with '#'.
                else:
                    for filename in glob.glob(wildcard):
                        try:
                            os.remove(filename)
                        except OSError:
                            shutil.rmtree(filename, ignore_errors=True)

        # It's an old-style class in Python 2.7...
        distutils.command.clean.clean.run(self)


################################################################################
# Configure compile flags
################################################################################

library_dirs = []

if IS_WINDOWS:
    # /NODEFAULTLIB makes sure we only link to DLL runtime
    # and matches the flags set for protobuf and ONNX
    extra_link_args = ['/NODEFAULTLIB:LIBCMT.LIB']
    # /MD links against DLL runtime
    # and matches the flags set for protobuf and ONNX
    # /Z7 turns on symbolic debugging information in .obj files
    # /EHa is about native C++ catch support for asynchronous
    # structured exception handling (SEH)
    # /DNOMINMAX removes builtin min/max functions
    # /wdXXXX disables warning no. XXXX
    extra_compile_args = ['/MD', '/Z7',
                          '/EHa', '/DNOMINMAX',
                          '/wd4267', '/wd4251', '/wd4522', '/wd4522', '/wd4838',
                          '/wd4305', '/wd4244', '/wd4190', '/wd4101', '/wd4996',
                          '/wd4275']
    if sys.version_info[0] == 2:
        if not check_env_flag('FORCE_PY27_BUILD'):
            report('The support for PyTorch with Python 2.7 on Windows is very experimental.')
            report('Please set the flag `FORCE_PY27_BUILD` to 1 to continue build.')
            sys.exit(1)
        # /bigobj increases number of sections in .obj file, which is needed to link
        # against libaries in Python 2.7 under Windows
        extra_compile_args.append('/bigobj')
else:
    extra_link_args = []
    extra_compile_args = [
        '-std=c++11',
        '-Wall',
        '-Wextra',
        '-Wno-strict-overflow',
        '-Wno-unused-parameter',
        '-Wno-missing-field-initializers',
        '-Wno-write-strings',
        '-Wno-unknown-pragmas',
        # This is required for Python 2 declarations that are deprecated in 3.
        '-Wno-deprecated-declarations',
        # Python 2.6 requires -fno-strict-aliasing, see
        # http://legacy.python.org/dev/peps/pep-3123/
        # We also depend on it in our code (even Python 3).
        '-fno-strict-aliasing',
        # Clang has an unfixed bug leading to spurious missing
        # braces warnings, see
        # https://bugs.llvm.org/show_bug.cgi?id=21629
        '-Wno-missing-braces',
    ]
    if check_env_flag('WERROR'):
        extra_compile_args.append('-Werror')

library_dirs.append(lib_path)

# we specify exact lib names to avoid conflict with lua-torch installs
CAFFE2_LIBS = []
if USE_CUDA:
    CAFFE2_LIBS.extend(['-Wl,--no-as-needed', os.path.join(lib_path, 'libcaffe2_gpu.so'), '-Wl,--as-needed'])
if USE_ROCM:
    CAFFE2_LIBS.extend(['-Wl,--no-as-needed', os.path.join(lib_path, 'libcaffe2_hip.so'), '-Wl,--as-needed'])

# static library only
if IS_DARWIN:
    CAFFE2_LIBS = []
    if USE_CUDA:
        CAFFE2_LIBS.append(os.path.join(lib_path, 'libcaffe2_gpu.dylib'))
    if USE_ROCM:
        CAFFE2_LIBS.append(os.path.join(lib_path, 'libcaffe2_hip.dylib'))

if IS_WINDOWS:
    CAFFE2_LIBS = []
    if USE_CUDA:
        CAFFE2_LIBS.append(os.path.join(lib_path, 'caffe2_gpu.lib'))
    if USE_ROCM:
        CAFFE2_LIBS.append(os.path.join(lib_path, 'caffe2_hip.lib'))

main_compile_args = []
main_libraries = ['shm', 'torch_python']
main_link_args = []
main_sources = ["torch/csrc/stub.cpp"]

# Before the introduction of stub.cpp, _C.so and libcaffe2.so defined
# some of the same symbols, and it was important for _C.so to be
# loaded before libcaffe2.so so that the versions in _C.so got
# used. This happened automatically because we loaded _C.so directly,
# and libcaffe2.so was brought in as a dependency (though I suspect it
# may have been possible to break by importing caffe2 first in the
# same process).
#
# Now, libtorch_python.so and libcaffe2.so define some of the same
# symbols. We directly load the _C.so stub, which brings both of these
# in as dependencies. We have to make sure that symbols continue to be
# looked up in libtorch_python.so first, by making sure it comes
# before libcaffe2.so in the linker command.
main_link_args.extend(CAFFE2_LIBS)

try:
    import numpy as np
    NUMPY_INCLUDE_DIR = np.get_include()
    USE_NUMPY = True
except ImportError:
    USE_NUMPY = False

if USE_CUDA:
    if IS_WINDOWS:
        cuda_lib_path = CUDA_HOME + '/lib/x64/'
    else:
        cuda_lib_dirs = ['lib64', 'lib']
        for lib_dir in cuda_lib_dirs:
            cuda_lib_path = os.path.join(CUDA_HOME, lib_dir)
            if os.path.exists(cuda_lib_path):
                break
    library_dirs.append(cuda_lib_path)

if DEBUG:
    if IS_WINDOWS:
        extra_link_args.append('/DEBUG:FULL')
    else:
        extra_compile_args += ['-O0', '-g']
        extra_link_args += ['-O0', '-g']

if REL_WITH_DEB_INFO:
    if IS_WINDOWS:
        extra_link_args.append('/DEBUG:FULL')
    else:
        extra_compile_args += ['-g']
        extra_link_args += ['-g']


def make_relative_rpath(path):
    if IS_DARWIN:
        return '-Wl,-rpath,@loader_path/' + path
    elif IS_WINDOWS:
        return ''
    else:
        return '-Wl,-rpath,$ORIGIN/' + path

################################################################################
# Declare extensions and package
################################################################################

extensions = []
packages = find_packages(exclude=('tools', 'tools.*'))
C = Extension("torch._C",
              libraries=main_libraries,
              sources=main_sources,
              language='c++',
              extra_compile_args=main_compile_args + extra_compile_args,
              include_dirs=[],
              library_dirs=library_dirs,
              extra_link_args=extra_link_args + main_link_args + [make_relative_rpath('lib')],
              )
extensions.append(C)

if not IS_WINDOWS:
    DL = Extension("torch._dl",
                   sources=["torch/csrc/dl.c"],
                   language='c'
                   )
    extensions.append(DL)


if USE_CUDA:
    thnvrtc_link_flags = extra_link_args + [make_relative_rpath('lib')]
    if IS_LINUX:
        thnvrtc_link_flags = thnvrtc_link_flags + ['-Wl,--no-as-needed']
    # these have to be specified as -lcuda in link_flags because they
    # have to come right after the `no-as-needed` option
    if IS_WINDOWS:
        thnvrtc_link_flags += ['cuda.lib', 'nvrtc.lib']
    else:
        thnvrtc_link_flags += ['-lcuda', '-lnvrtc']
    cuda_stub_path = [cuda_lib_path + '/stubs']
    if IS_DARWIN:
        # on macOS this is where the CUDA stub is installed according to the manual
        cuda_stub_path = ["/usr/local/cuda/lib"]
    THNVRTC = Extension("torch._nvrtc",
                        sources=['torch/csrc/nvrtc.cpp'],
                        language='c++',
                        extra_compile_args=main_compile_args + extra_compile_args,
                        include_dirs=[cwd],
                        library_dirs=library_dirs + cuda_stub_path,
                        extra_link_args=thnvrtc_link_flags,
                        )
    extensions.append(THNVRTC)

# These extensions are built by cmake and copied manually in build_extensions()
# inside the build_ext implementaiton
extensions.append(
    Extension(
        name=str('caffe2.python.caffe2_pybind11_state'),
        sources=[]),
)
if USE_CUDA:
    extensions.append(
        Extension(
            name=str('caffe2.python.caffe2_pybind11_state_gpu'),
            sources=[]),
    )
if USE_ROCM:
    extensions.append(
        Extension(
            name=str('caffe2.python.caffe2_pybind11_state_hip'),
            sources=[]),
    )

cmdclass = {
    'build_ext': build_ext,
    'clean': clean,
    'install': install,
}

entry_points = {
    'console_scripts': [
        'convert-caffe2-to-onnx = caffe2.python.onnx.bin.conversion:caffe2_to_onnx',
        'convert-onnx-to-caffe2 = caffe2.python.onnx.bin.conversion:onnx_to_caffe2',
    ]
}

# post run, warnings, printed at the end to make them more visible
build_update_message = """
    It is no longer necessary to use the 'build' or 'rebuild' targets

    To install:
      $ python setup.py install
    To develop locally:
      $ python setup.py develop
    To force cmake to re-run (off by default):
      $ python setup.py develop --cmake
"""


def print_box(msg):
    lines = msg.split('\n')
    size = max(len(l) + 1 for l in lines)
    print('-' * (size + 2))
    for l in lines:
        print('|{}{}|'.format(l, ' ' * (size - len(l))))
    print('-' * (size + 2))

if __name__ == '__main__':
    if RUN_BUILD_DEPS:
        build_deps()
    setup(
        name=package_name,
        version=version,
        description=("Tensors and Dynamic neural networks in "
                     "Python with strong GPU acceleration"),
        ext_modules=extensions,
        cmdclass=cmdclass,
        packages=packages,
        entry_points=entry_points,
        package_data={
            'torch': [
                'bin/*',
                'test/*',
                '__init__.pyi',
                'lib/*.so*',
                'lib/*.dylib*',
                'lib/*.dll',
                'lib/*.lib',
                'lib/*.pdb',
                'lib/torch_shm_manager',
                'lib/*.h',
                'include/ATen/*.h',
                'include/ATen/cpu/*.h',
                'include/ATen/core/*.h',
                'include/ATen/cuda/*.cuh',
                'include/ATen/cuda/*.h',
                'include/ATen/cuda/detail/*.cuh',
                'include/ATen/cuda/detail/*.h',
                'include/ATen/cudnn/*.h',
                'include/ATen/detail/*.h',
                'include/caffe2/utils/*.h',
                'include/c10/*.h',
                'include/c10/macros/*.h',
                'include/c10/core/*.h',
                'include/ATen/core/dispatch/*.h',
                'include/c10/core/impl/*.h',
                'include/ATen/core/opschema/*.h',
                'include/c10/util/*.h',
                'include/c10/cuda/*.h',
                'include/c10/cuda/impl/*.h',
                'include/c10/hip/*.h',
                'include/c10/hip/impl/*.h',
                'include/caffe2/**/*.h',
                'include/torch/*.h',
                'include/torch/csrc/*.h',
                'include/torch/csrc/api/include/torch/*.h',
                'include/torch/csrc/api/include/torch/data/*.h',
                'include/torch/csrc/api/include/torch/data/dataloader/*.h',
                'include/torch/csrc/api/include/torch/data/datasets/*.h',
                'include/torch/csrc/api/include/torch/data/detail/*.h',
                'include/torch/csrc/api/include/torch/data/samplers/*.h',
                'include/torch/csrc/api/include/torch/data/transforms/*.h',
                'include/torch/csrc/api/include/torch/detail/*.h',
                'include/torch/csrc/api/include/torch/detail/ordered_dict.h',
                'include/torch/csrc/api/include/torch/nn/*.h',
                'include/torch/csrc/api/include/torch/nn/modules/*.h',
                'include/torch/csrc/api/include/torch/nn/parallel/*.h',
                'include/torch/csrc/api/include/torch/optim/*.h',
                'include/torch/csrc/api/include/torch/serialize/*.h',
                'include/torch/csrc/autograd/*.h',
                'include/torch/csrc/autograd/generated/*.h',
                'include/torch/csrc/cuda/*.h',
                'include/torch/csrc/jit/*.h',
                'include/torch/csrc/jit/generated/*.h',
                'include/torch/csrc/jit/passes/*.h',
                'include/torch/csrc/jit/script/*.h',
                'include/torch/csrc/utils/*.h',
                'include/pybind11/*.h',
                'include/pybind11/detail/*.h',
                'include/TH/*.h*',
                'include/TH/generic/*.h*',
                'include/THC/*.cuh',
                'include/THC/*.h*',
                'include/THC/generic/*.h',
                'include/THCUNN/*.cuh',
                'include/THCUNN/generic/*.h',
                'include/THNN/*.h',
                'include/THNN/generic/*.h',
                'share/cmake/ATen/*.cmake',
                'share/cmake/Caffe2/*.cmake',
                'share/cmake/Caffe2/public/*.cmake',
                'share/cmake/Caffe2/Modules_CUDA_fix/*.cmake',
                'share/cmake/Caffe2/Modules_CUDA_fix/upstream/*.cmake',
                'share/cmake/Caffe2/Modules_CUDA_fix/upstream/FindCUDA/*.cmake',
                'share/cmake/Gloo/*.cmake',
                'share/cmake/Torch/*.cmake',
            ],
            'caffe2': [
                'python/serialized_test/data/operator_test/*.zip',
            ]
        },
    )
    if EMIT_BUILD_WARNING:
        print_box(build_update_message)