| /* | |
| * Copyright (c) 2018, The OpenThread Authors. | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. Neither the name of the copyright holder nor the | |
| * names of its contributors may be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE | |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| /** | |
| * @file | |
| * This file includes the platform-specific configuration. | |
| * | |
| */ | |
| /** | |
| * @def OPENTHREAD_SIMULATION_UART_BAUDRATE | |
| * | |
| * This setting configures the baud rate of the UART. | |
| * | |
| */ | |
| #ifndef OPENTHREAD_SIMULATION_UART_BAUDRATE | |
| #define OPENTHREAD_SIMULATION_UART_BAUDRATE B115200 | |
| #endif | |
| /** | |
| * @def OPENTHREAD_SIMULATION_VIRTUAL_TIME | |
| * | |
| * This setting configures whether to use virtual time (used for simulation) in simulation platform. | |
| * | |
| */ | |
| #ifndef OPENTHREAD_SIMULATION_VIRTUAL_TIME | |
| #define OPENTHREAD_SIMULATION_VIRTUAL_TIME 0 | |
| #endif | |
| /** | |
| * @def OPENTHREAD_SIMULATION_VIRTUAL_TIME_UART | |
| * | |
| * This setting configures whether to use virtual time for UART. | |
| * | |
| */ | |
| #ifndef OPENTHREAD_SIMULATION_VIRTUAL_TIME_UART | |
| #define OPENTHREAD_SIMULATION_VIRTUAL_TIME_UART 0 | |
| #endif | |
| /** | |
| * @def OPENTHREAD_PLATFORM_USE_PSEUDO_RESET | |
| * | |
| * Define as 1 to enable pseudo-reset. | |
| * | |
| */ | |
| #ifndef OPENTHREAD_PLATFORM_USE_PSEUDO_RESET | |
| #define OPENTHREAD_PLATFORM_USE_PSEUDO_RESET 0 | |
| #endif | |
| /** | |
| * @def OPENTHREAD_CONFIG_NCP_SPI_ENABLE | |
| * | |
| * Define as 1 to enable SPI NCP interface. | |
| * | |
| */ | |
| #ifndef OPENTHREAD_CONFIG_NCP_SPI_ENABLE | |
| #define OPENTHREAD_CONFIG_NCP_SPI_ENABLE 0 | |
| #endif | |
| /** | |
| * Check OTNS configurations | |
| * | |
| */ | |
| #if OPENTHREAD_CONFIG_OTNS_ENABLE | |
| #if !OPENTHREAD_SIMULATION_VIRTUAL_TIME | |
| #error "OTNS requires virtual time simulations" | |
| #endif | |
| #endif // OPENTHREAD_CONFIG_OTNS_ENABLE | |
| /** | |
| * @def OPENTHREAD_SIMULATION_MAX_NETWORK_SIZE | |
| * | |
| * This setting configures the maximum network size in simulation. | |
| * | |
| */ | |
| #ifndef OPENTHREAD_SIMULATION_MAX_NETWORK_SIZE | |
| #define OPENTHREAD_SIMULATION_MAX_NETWORK_SIZE 33 | |
| #endif |