| /* |
| * Copyright (c) 2018, The OpenThread Authors. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the copyright holder nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file |
| * This file includes definitions for the spinel based radio transceiver. |
| */ |
| |
| #ifndef RADIO_SPINEL_HPP_ |
| #define RADIO_SPINEL_HPP_ |
| |
| #include <openthread/platform/radio.h> |
| |
| #include "openthread-spinel-config.h" |
| #include "core/radio/max_power_table.hpp" |
| #include "lib/spinel/logger.hpp" |
| #include "lib/spinel/radio_spinel_metrics.h" |
| #include "lib/spinel/spinel.h" |
| #include "lib/spinel/spinel_interface.hpp" |
| #include "ncp/ncp_config.h" |
| |
| namespace ot { |
| namespace Spinel { |
| |
| /** |
| * Maximum number of Spinel Interface IDs. |
| * |
| */ |
| #if OPENTHREAD_CONFIG_MULTIPAN_RCP_ENABLE |
| static constexpr uint8_t kSpinelHeaderMaxNumIid = 4; |
| #else |
| static constexpr uint8_t kSpinelHeaderMaxNumIid = 1; |
| #endif |
| |
| struct RadioSpinelCallbacks |
| { |
| /** |
| * This callback notifies user of `RadioSpinel` of a received frame. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame A pointer to the received frame or nullptr if the receive operation failed. |
| * @param[in] aError kErrorNone when successfully received a frame, |
| * kErrorAbort when reception was aborted and a frame was not received, |
| * kErrorNoBufs when a frame could not be received due to lack of rx buffer space. |
| * |
| */ |
| void (*mReceiveDone)(otInstance *aInstance, otRadioFrame *aFrame, Error aError); |
| |
| /** |
| * The callback notifies user of `RadioSpinel` that the transmit operation has completed, providing, if |
| * applicable, the received ACK frame. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame The transmitted frame. |
| * @param[in] aAckFrame A pointer to the ACK frame, nullptr if no ACK was received. |
| * @param[in] aError kErrorNone when the frame was transmitted, |
| * kErrorNoAck when the frame was transmitted but no ACK was received, |
| * kErrorChannelAccessFailure tx failed due to activity on the channel, |
| * kErrorAbort when transmission was aborted for other reasons. |
| * |
| */ |
| void (*mTransmitDone)(otInstance *aInstance, otRadioFrame *aFrame, otRadioFrame *aAckFrame, Error aError); |
| |
| /** |
| * This callback notifies user of `RadioSpinel` that energy scan is complete. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aMaxRssi Maximum RSSI seen on the channel, or `SubMac::kInvalidRssiValue` if failed. |
| * |
| */ |
| void (*mEnergyScanDone)(otInstance *aInstance, int8_t aMaxRssi); |
| |
| /** |
| * This callback notifies user of `RadioSpinel` that the transmission has started. |
| * |
| * @param[in] aInstance A pointer to the OpenThread instance structure. |
| * @param[in] aFrame A pointer to the frame that is being transmitted. |
| * |
| */ |
| void (*mTxStarted)(otInstance *aInstance, otRadioFrame *aFrame); |
| |
| /** |
| * This callback notifies user of `RadioSpinel` that the radio interface switchover has completed. |
| * |
| * @param[in] aInstance A pointer to the OpenThread instance structure. |
| * @param[in] aSuccess A value indicating if the switchover was successful or not. |
| * |
| */ |
| void (*mSwitchoverDone)(otInstance *aInstance, bool aSuccess); |
| |
| #if OPENTHREAD_CONFIG_DIAG_ENABLE |
| /** |
| * This callback notifies diagnostics module using `RadioSpinel` of a received frame. |
| * |
| * This callback is used when diagnostics is enabled. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame A pointer to the received frame or NULL if the receive operation failed. |
| * @param[in] aError OT_ERROR_NONE when successfully received a frame, |
| * OT_ERROR_ABORT when reception was aborted and a frame was not received, |
| * OT_ERROR_NO_BUFS when a frame could not be received due to lack of rx buffer space. |
| * |
| */ |
| void (*mDiagReceiveDone)(otInstance *aInstance, otRadioFrame *aFrame, Error aError); |
| |
| /** |
| * This callback notifies diagnostics module using `RadioSpinel` that the transmission has completed. |
| * |
| * This callback is used when diagnostics is enabled. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aFrame A pointer to the frame that was transmitted. |
| * @param[in] aError OT_ERROR_NONE when the frame was transmitted, |
| * OT_ERROR_CHANNEL_ACCESS_FAILURE tx could not take place due to activity on the |
| * channel, OT_ERROR_ABORT when transmission was aborted for other reasons. |
| * |
| */ |
| void (*mDiagTransmitDone)(otInstance *aInstance, otRadioFrame *aFrame, Error aError); |
| #endif // OPENTHREAD_CONFIG_DIAG_ENABLE |
| }; |
| |
| /** |
| * The class for providing a OpenThread radio interface by talking with a radio-only |
| * co-processor(RCP). |
| * |
| */ |
| class RadioSpinel : private Logger |
| { |
| public: |
| /** |
| * Initializes the spinel based OpenThread transceiver. |
| * |
| */ |
| RadioSpinel(void); |
| |
| /** |
| * Deinitializes the spinel based OpenThread transceiver. |
| * |
| */ |
| ~RadioSpinel(void) { Deinit(); } |
| |
| /** |
| * Initialize this radio transceiver. |
| * |
| * @param[in] aSpinelInterface A reference to the Spinel interface. |
| * @param[in] aResetRadio TRUE to reset on init, FALSE to not reset on init. |
| * @param[in] aSkipRcpCompatibilityCheck TRUE to skip RCP compatibility check, FALSE to perform the check. |
| * @param[in] aIidList A Pointer to the list of IIDs to receive spinel frame from. |
| * First entry must be the IID of the Host Application. |
| * @param[in] aIidListLength The Length of the @p aIidList. |
| * |
| */ |
| void Init(SpinelInterface &aSpinelInterface, |
| bool aResetRadio, |
| bool aSkipRcpCompatibilityCheck, |
| const spinel_iid_t *aIidList, |
| uint8_t aIidListLength); |
| |
| /** |
| * This method sets the notification callbacks. |
| * |
| * @param[in] aCallbacks A pointer to structure with notification callbacks. |
| * |
| */ |
| void SetCallbacks(const struct RadioSpinelCallbacks &aCallbacks); |
| |
| /** |
| * Deinitialize this radio transceiver. |
| * |
| */ |
| void Deinit(void); |
| |
| /** |
| * Gets the status of promiscuous mode. |
| * |
| * @retval true Promiscuous mode is enabled. |
| * @retval false Promiscuous mode is disabled. |
| * |
| */ |
| bool IsPromiscuous(void) const { return mIsPromiscuous; } |
| |
| /** |
| * Sets the status of promiscuous mode. |
| * |
| * @param[in] aEnable Whether to enable or disable promiscuous mode. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetPromiscuous(bool aEnable); |
| |
| /** |
| * Sets the status of RxOnWhenIdle mode. |
| * |
| * @param[in] aEnable Whether to enable or disable RxOnWhenIdle mode. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetRxOnWhenIdle(bool aEnable); |
| |
| /** |
| * Sets the Short Address for address filtering. |
| * |
| * @param[in] aShortAddress The IEEE 802.15.4 Short Address. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetShortAddress(uint16_t aAddress); |
| |
| /** |
| * Gets the factory-assigned IEEE EUI-64 for this transceiver. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[out] aIeeeEui64 A pointer to the factory-assigned IEEE EUI-64. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError GetIeeeEui64(uint8_t *aIeeeEui64); |
| |
| /** |
| * Sets the Extended Address for address filtering. |
| * |
| * @param[in] aExtAddress A pointer to the IEEE 802.15.4 Extended Address stored in little-endian byte order. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetExtendedAddress(const otExtAddress &aExtAddress); |
| |
| /** |
| * Sets the PAN ID for address filtering. |
| * |
| * @param[in] aPanId The IEEE 802.15.4 PAN ID. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetPanId(uint16_t aPanId); |
| |
| /** |
| * Gets the radio's transmit power in dBm. |
| * |
| * @param[out] aPower The transmit power in dBm. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError GetTransmitPower(int8_t &aPower); |
| |
| /** |
| * Sets the radio's transmit power in dBm. |
| * |
| * @param[in] aPower The transmit power in dBm. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetTransmitPower(int8_t aPower); |
| |
| /** |
| * Gets the radio's CCA ED threshold in dBm. |
| * |
| * @param[out] aThreshold The CCA ED threshold in dBm. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError GetCcaEnergyDetectThreshold(int8_t &aThreshold); |
| |
| /** |
| * Sets the radio's CCA ED threshold in dBm. |
| * |
| * @param[in] aThreshold The CCA ED threshold in dBm. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetCcaEnergyDetectThreshold(int8_t aThreshold); |
| |
| /** |
| * Gets the FEM's Rx LNA gain in dBm. |
| * |
| * @param[out] aGain The FEM's Rx LNA gain in dBm. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError GetFemLnaGain(int8_t &aGain); |
| |
| /** |
| * Sets the FEM's Rx LNA gain in dBm. |
| * |
| * @param[in] aGain The FEM's Rx LNA gain in dBm. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetFemLnaGain(int8_t aGain); |
| |
| /** |
| * Returns the radio sw version string. |
| * |
| * @returns A pointer to the radio version string. |
| * |
| */ |
| const char *GetVersion(void) const { return sVersion; } |
| |
| /** |
| * Returns the radio capabilities. |
| * |
| * @returns The radio capability bit vector. |
| * |
| */ |
| otRadioCaps GetRadioCaps(void) const { return sRadioCaps; } |
| |
| /** |
| * Gets the most recent RSSI measurement. |
| * |
| * @returns The RSSI in dBm when it is valid. 127 when RSSI is invalid. |
| */ |
| int8_t GetRssi(void); |
| |
| /** |
| * Returns the radio receive sensitivity value. |
| * |
| * @returns The radio receive sensitivity value in dBm. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| int8_t GetReceiveSensitivity(void) const { return mRxSensitivity; } |
| |
| /** |
| * Gets current state of the radio. |
| * |
| * @return Current state of the radio. |
| * |
| */ |
| otRadioState GetState(void) const; |
| |
| /** |
| * Gets the current receiving channel. |
| * |
| * @returns Current receiving channel. |
| * |
| */ |
| uint8_t GetChannel(void) const { return mChannel; } |
| |
| #if OPENTHREAD_CONFIG_PLATFORM_RADIO_COEX_ENABLE |
| /** |
| * Enable the radio coex. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aEnabled TRUE to enable the radio coex, FALSE otherwise. |
| * |
| * @retval OT_ERROR_NONE Successfully enabled. |
| * @retval OT_ERROR_FAILED The radio coex could not be enabled. |
| * |
| */ |
| otError SetCoexEnabled(bool aEnabled); |
| |
| /** |
| * Check whether radio coex is enabled or not. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @returns TRUE if the radio coex is enabled, FALSE otherwise. |
| * |
| */ |
| bool IsCoexEnabled(void); |
| |
| /** |
| * Retrieves the radio coexistence metrics. |
| * |
| * @param[out] aCoexMetrics A reference to the coexistence metrics structure. |
| * |
| * @retval OT_ERROR_NONE Successfully retrieved the coex metrics. |
| * @retval OT_ERROR_INVALID_ARGS @p aCoexMetrics was nullptr. |
| * |
| */ |
| otError GetCoexMetrics(otRadioCoexMetrics &aCoexMetrics); |
| #endif // OPENTHREAD_CONFIG_PLATFORM_RADIO_COEX_ENABLE |
| |
| /** |
| * Get currently active interface. |
| * |
| * @param[out] aIid IID of the interface that owns the radio. |
| * |
| * @retval OT_ERROR_NONE Successfully got the property. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * @retval OT_ERROR_NOT_IMPLEMENTED Failed due to lack of the support in radio |
| * @retval OT_ERROR_INVALID_COMMAND Platform supports all interfaces simultaneously. |
| * (i.e. no active/inactive interface concept in the platform level) |
| * |
| */ |
| otError GetMultipanActiveInterface(spinel_iid_t *aIid); |
| |
| /** |
| * Sets specified radio interface active |
| * |
| * This function allows selecting currently active radio interface on platforms that do not support parallel |
| * communication on multiple interfaces. I.e. if more than one interface is in receive state calling |
| * SetMultipanActiveInterface guarantees that specified interface will not be losing frames. This function |
| * returns if the request was received properly. After interface switching is complete SwitchoverDone callback is |
| * Invoked. Switching interfaces may take longer if aCompletePending is set true. |
| * |
| * @param[in] aIid IID of the interface to set active. |
| * @param[in] aCompletePending Set true if pending radio operation should complete first(Soft switch) or false if |
| * ongoing operations should be interrupted (Force switch). |
| * |
| * @retval OT_ERROR_NONE Successfully requested interface switch. |
| * @retval OT_ERROR_BUSY Failed due to another operation on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * @retval OT_ERROR_NOT_IMPLEMENTED Failed due to lack of support in radio for the given interface id or |
| * @retval OT_ERROR_INVALID_COMMAND Platform supports all interfaces simultaneously |
| * (i.e. no active/inactive interface concept in the platform level) |
| * @retval OT_ERROR_ALREADY Given interface is already active. |
| * |
| */ |
| otError SetMultipanActiveInterface(spinel_iid_t aIid, bool aCompletePending); |
| |
| /** |
| * Returns a reference to the transmit buffer. |
| * |
| * The caller forms the IEEE 802.15.4 frame in this buffer then calls otPlatRadioTransmit() to request transmission. |
| * |
| * @returns A reference to the transmit buffer. |
| * |
| */ |
| otRadioFrame &GetTransmitFrame(void) { return mTxRadioFrame; } |
| |
| /** |
| * Enables or disables source address match feature. |
| * |
| * @param[in] aEnable Enable/disable source address match feature. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError EnableSrcMatch(bool aEnable); |
| |
| /** |
| * Adds a short address to the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aShortAddress The short address to be added. |
| * |
| * @retval OT_ERROR_NONE Successfully added short address to the source match table. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * @retval OT_ERROR_NO_BUFS No available entry in the source match table. |
| */ |
| otError AddSrcMatchShortEntry(uint16_t aShortAddress); |
| |
| /** |
| * Removes a short address from the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aShortAddress The short address to be removed. |
| * |
| * @retval OT_ERROR_NONE Successfully removed short address from the source match table. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * @retval OT_ERROR_NO_ADDRESS The short address is not in source address match table. |
| */ |
| otError ClearSrcMatchShortEntry(uint16_t aShortAddress); |
| |
| /** |
| * Clear all short addresses from the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError ClearSrcMatchShortEntries(void); |
| |
| /** |
| * Add an extended address to the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aExtAddress The extended address to be added stored in little-endian byte order. |
| * |
| * @retval OT_ERROR_NONE Successfully added extended address to the source match table. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * @retval OT_ERROR_NO_BUFS No available entry in the source match table. |
| */ |
| otError AddSrcMatchExtEntry(const otExtAddress &aExtAddress); |
| |
| /** |
| * Remove an extended address from the source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * @param[in] aExtAddress The extended address to be removed stored in little-endian byte order. |
| * |
| * @retval OT_ERROR_NONE Successfully removed the extended address from the source match table. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * @retval OT_ERROR_NO_ADDRESS The extended address is not in source address match table. |
| */ |
| otError ClearSrcMatchExtEntry(const otExtAddress &aExtAddress); |
| |
| /** |
| * Clear all the extended/long addresses from source address match table. |
| * |
| * @param[in] aInstance The OpenThread instance structure. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError ClearSrcMatchExtEntries(void); |
| |
| /** |
| * Begins the energy scan sequence on the radio. |
| * |
| * @param[in] aScanChannel The channel to perform the energy scan on. |
| * @param[in] aScanDuration The duration, in milliseconds, for the channel to be scanned. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError EnergyScan(uint8_t aScanChannel, uint16_t aScanDuration); |
| |
| /** |
| * Switches the radio state from Receive to Transmit. |
| * |
| * @param[in] aFrame A reference to the transmitted frame. |
| * |
| * @retval OT_ERROR_NONE Successfully transitioned to Transmit. |
| * @retval OT_ERROR_BUSY Failed due to another transmission is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * @retval OT_ERROR_INVALID_STATE The radio was not in the Receive state. |
| */ |
| otError Transmit(otRadioFrame &aFrame); |
| |
| /** |
| * Switches the radio state from Sleep to Receive. |
| * |
| * @param[in] aChannel The channel to use for receiving. |
| * |
| * @retval OT_ERROR_NONE Successfully transitioned to Receive. |
| * @retval OT_ERROR_INVALID_STATE The radio was disabled or transmitting. |
| * |
| */ |
| otError Receive(uint8_t aChannel); |
| |
| /** |
| * Switches the radio state from Receive to Sleep. |
| * |
| * @retval OT_ERROR_NONE Successfully transitioned to Sleep. |
| * @retval OT_ERROR_BUSY The radio was transmitting |
| * @retval OT_ERROR_INVALID_STATE The radio was disabled |
| * |
| */ |
| otError Sleep(void); |
| |
| /** |
| * Enable the radio. |
| * |
| * @param[in] aInstance A pointer to the OpenThread instance. |
| * |
| * @retval OT_ERROR_NONE Successfully enabled. |
| * @retval OT_ERROR_FAILED The radio could not be enabled. |
| * |
| */ |
| otError Enable(otInstance *aInstance); |
| |
| /** |
| * Disable the radio. |
| * |
| * @retval OT_ERROR_NONE Successfully transitioned to Disabled. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError Disable(void); |
| |
| /** |
| * Checks whether radio is enabled or not. |
| * |
| * @returns TRUE if the radio is enabled, FALSE otherwise. |
| * |
| */ |
| bool IsEnabled(void) const { return mState != kStateDisabled; } |
| |
| /** |
| * Indicates whether there is a pending transmission. |
| * |
| * @retval TRUE There is a pending transmission. |
| * @retval FALSE There is no pending transmission. |
| * |
| */ |
| bool IsTransmitting(void) const { return mState == kStateTransmitting; } |
| |
| /** |
| * Indicates whether a transmit has just finished. |
| * |
| * @retval TRUE The transmission is done. |
| * @retval FALSE The transmission is not done. |
| * |
| */ |
| bool IsTransmitDone(void) const { return mState == kStateTransmitDone; } |
| |
| /** |
| * Returns the timeout timepoint for the pending transmission. |
| * |
| * @returns The timeout timepoint for the pending transmission. |
| * |
| */ |
| uint64_t GetTxRadioEndUs(void) const { return mTxRadioEndUs; } |
| |
| /** |
| * Processes any pending the I/O data. |
| * |
| * @param[in] aContext The process context. |
| * |
| */ |
| void Process(const void *aContext); |
| |
| #if OPENTHREAD_CONFIG_DIAG_ENABLE |
| /** |
| * Enables/disables the factory diagnostics mode. |
| * |
| * @param[in] aMode TRUE to enable diagnostics mode, FALSE otherwise. |
| * |
| */ |
| void SetDiagEnabled(bool aMode) { mDiagMode = aMode; } |
| |
| /** |
| * Indicates whether or not factory diagnostics mode is enabled. |
| * |
| * @returns TRUE if factory diagnostics mode is enabled, FALSE otherwise. |
| * |
| */ |
| bool IsDiagEnabled(void) const { return mDiagMode; } |
| |
| /** |
| * Processes platform diagnostics commands. |
| * |
| * @param[in] aString A null-terminated input string. |
| * @param[out] aOutput The diagnostics execution result. |
| * @param[in] aOutputMaxLen The output buffer size. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError PlatDiagProcess(const char *aString, char *aOutput, size_t aOutputMaxLen); |
| #endif |
| |
| /** |
| * Returns the radio channel mask. |
| * |
| * @param[in] aPreferred TRUE to get preferred channel mask, FALSE to get supported channel mask. |
| * |
| * @returns The radio channel mask according to @aPreferred: |
| * The radio supported channel mask that the device is allowed to be on. |
| * The radio preferred channel mask that the device prefers to form on. |
| * |
| */ |
| uint32_t GetRadioChannelMask(bool aPreferred); |
| |
| /** |
| * Processes a received Spinel frame. |
| * |
| * The newly received frame is available in `RxFrameBuffer` from `SpinelInterface::GetRxFrameBuffer()`. |
| * |
| */ |
| void HandleReceivedFrame(void); |
| |
| /** |
| * Sets MAC key and key index to RCP. |
| * |
| * @param[in] aKeyIdMode The key ID mode. |
| * @param[in] aKeyId The key index. |
| * @param[in] aPrevKey Pointer to previous MAC key. |
| * @param[in] aCurrKey Pointer to current MAC key. |
| * @param[in] aNextKey Pointer to next MAC key. |
| * |
| * @retval OT_ERROR_NONE Succeeded. |
| * @retval OT_ERROR_INVALID_ARGS One of the keys passed is invalid.. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetMacKey(uint8_t aKeyIdMode, |
| uint8_t aKeyId, |
| const otMacKeyMaterial *aPrevKey, |
| const otMacKeyMaterial *aCurrKey, |
| const otMacKeyMaterial *aNextKey); |
| |
| /** |
| * Sets the current MAC Frame Counter value. |
| * |
| * @param[in] aMacFrameCounter The MAC Frame Counter value. |
| * @param[in] aSetIfLarger If `true`, set only if the new value is larger than the current value. |
| * If `false`, set the new value independent of the current value. |
| * |
| */ |
| otError SetMacFrameCounter(uint32_t aMacFrameCounter, bool aSetIfLarger); |
| |
| /** |
| * Sets the radio region code. |
| * |
| * @param[in] aRegionCode The radio region code. |
| * |
| * @retval OT_ERROR_NONE Successfully set region code. |
| * @retval OT_ERROR_FAILED Other platform specific errors. |
| * |
| */ |
| otError SetRadioRegion(uint16_t aRegionCode); |
| |
| /** |
| * Gets the radio region code. |
| * |
| * @param[out] aRegionCode The radio region code. |
| * |
| * @retval OT_ERROR_INVALID_ARGS @p aRegionCode is nullptr. |
| * @retval OT_ERROR_NONE Successfully got region code. |
| * @retval OT_ERROR_FAILED Other platform specific errors. |
| * |
| */ |
| otError GetRadioRegion(uint16_t *aRegionCode); |
| |
| #if OPENTHREAD_CONFIG_MLE_LINK_METRICS_SUBJECT_ENABLE |
| /** |
| * Enable/disable or update Enhanced-ACK Based Probing in radio for a specific Initiator. |
| * |
| * After Enhanced-ACK Based Probing is configured by a specific Probing Initiator, the Enhanced-ACK sent to that |
| * node should include Vendor-Specific IE containing Link Metrics data. This method informs the radio to start/stop |
| * to collect Link Metrics data and include Vendor-Specific IE that containing the data in Enhanced-ACK sent to that |
| * Probing Initiator. |
| * |
| * @param[in] aLinkMetrics This parameter specifies what metrics to query. Per spec 4.11.3.4.4.6, at most 2 |
| * metrics can be specified. The probing would be disabled if @p aLinkMetrics is |
| * bitwise 0. |
| * @param[in] aShortAddress The short address of the Probing Initiator. |
| * @param[in] aExtAddress The extended source address of the Probing Initiator. @p aExtAddress MUST NOT be |
| * nullptr. |
| * |
| * @retval OT_ERROR_NONE Successfully configured the Enhanced-ACK Based Probing. |
| * @retval OT_ERROR_INVALID_ARGS @p aExtAddress is nullptr. |
| * @retval OT_ERROR_NOT_FOUND The Initiator indicated by @p aShortAddress is not found when trying to clear. |
| * @retval OT_ERROR_NO_BUFS No more Initiator can be supported. |
| */ |
| otError ConfigureEnhAckProbing(otLinkMetrics aLinkMetrics, |
| const otShortAddress &aShortAddress, |
| const otExtAddress &aExtAddress); |
| #endif |
| |
| #if OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE || OPENTHREAD_CONFIG_MAC_CSL_TRANSMITTER_ENABLE |
| /** |
| * Get the current accuracy, in units of ± ppm, of the clock used for scheduling CSL operations. |
| * |
| * @note Platforms may optimize this value based on operational conditions (i.e.: temperature). |
| * |
| * @retval The current CSL rx/tx scheduling drift, in units of ± ppm. |
| * |
| */ |
| uint8_t GetCslAccuracy(void); |
| #endif |
| |
| #if OPENTHREAD_CONFIG_MAC_CSL_TRANSMITTER_ENABLE |
| /** |
| * Get the current uncertainty, in units of 10 us, of the clock used for scheduling CSL operations. |
| * |
| * @retval The current CSL Clock Uncertainty in units of 10 us. |
| * |
| */ |
| uint8_t GetCslUncertainty(void); |
| #endif |
| |
| /** |
| * Checks whether the spinel interface is radio-only. |
| * |
| * @param[out] aSupportsRcpApiVersion A reference to a boolean variable to update whether the list of |
| * spinel capabilities includes `SPINEL_CAP_RCP_API_VERSION`. |
| * @param[out] aSupportsRcpMinHostApiVersion A reference to a boolean variable to update whether the list of |
| * spinel capabilities includes `SPINEL_CAP_RCP_MIN_HOST_API_VERSION`. |
| * |
| * @retval TRUE The radio chip is in radio-only mode. |
| * @retval FALSE Otherwise. |
| * |
| */ |
| bool IsRcp(bool &aSupportsRcpApiVersion, bool &aSupportsRcpMinHostApiVersion); |
| |
| /** |
| * Checks whether there is pending frame in the buffer. |
| * |
| * @returns Whether there is pending frame in the buffer. |
| * |
| */ |
| bool HasPendingFrame(void) const { return mRxFrameBuffer.HasSavedFrame(); } |
| |
| /** |
| * Returns the next timepoint to recalculate RCP time offset. |
| * |
| * @returns The timepoint to start the recalculation of RCP time offset. |
| * |
| */ |
| uint64_t GetNextRadioTimeRecalcStart(void) const { return mRadioTimeRecalcStart; } |
| |
| /** |
| * Gets the current estimated time on RCP. |
| * |
| * @returns The current estimated RCP time in microseconds. |
| * |
| */ |
| uint64_t GetNow(void); |
| |
| /** |
| * Returns the bus speed between the host and the radio. |
| * |
| * @returns bus speed in bits/second. |
| * |
| */ |
| uint32_t GetBusSpeed(void) const; |
| |
| /** |
| * Sets the max transmit power. |
| * |
| * @param[in] aChannel The radio channel. |
| * @param[in] aMaxPower The max transmit power in dBm. |
| * |
| * @retval OT_ERROR_NONE Successfully set the max transmit power. |
| * @retval OT_ERROR_INVALID_ARGS Channel is not in valid range. |
| * |
| */ |
| otError SetChannelMaxTransmitPower(uint8_t aChannel, int8_t aMaxPower); |
| |
| /** |
| * Tries to retrieve a spinel property from OpenThread transceiver. |
| * |
| * @param[in] aKey Spinel property key. |
| * @param[in] aFormat Spinel formatter to unpack property value. |
| * @param[out] ... Variable arguments list. |
| * |
| * @retval OT_ERROR_NONE Successfully got the property. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError Get(spinel_prop_key_t aKey, const char *aFormat, ...); |
| |
| /** |
| * Tries to retrieve a spinel property from OpenThread transceiver with parameter appended. |
| * |
| * @param[in] aKey Spinel property key. |
| * @param[in] aParam Parameter appended to spinel command. |
| * @param[in] aParamSize Size of parameter appended to spinel command |
| * @param[in] aFormat Spinel formatter to unpack property value. |
| * @param[out] ... Variable arguments list. |
| * |
| * @retval OT_ERROR_NONE Successfully got the property. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError GetWithParam(spinel_prop_key_t aKey, |
| const uint8_t *aParam, |
| spinel_size_t aParamSize, |
| const char *aFormat, |
| ...); |
| |
| /** |
| * Tries to update a spinel property of OpenThread transceiver. |
| * |
| * @param[in] aKey Spinel property key. |
| * @param[in] aFormat Spinel formatter to pack property value. |
| * @param[in] ... Variable arguments list. |
| * |
| * @retval OT_ERROR_NONE Successfully set the property. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError Set(spinel_prop_key_t aKey, const char *aFormat, ...); |
| |
| /** |
| * Tries to insert a item into a spinel list property of OpenThread transceiver. |
| * |
| * @param[in] aKey Spinel property key. |
| * @param[in] aFormat Spinel formatter to pack the item. |
| * @param[in] ... Variable arguments list. |
| * |
| * @retval OT_ERROR_NONE Successfully insert item into the property. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError Insert(spinel_prop_key_t aKey, const char *aFormat, ...); |
| |
| /** |
| * Tries to remove a item from a spinel list property of OpenThread transceiver. |
| * |
| * @param[in] aKey Spinel property key. |
| * @param[in] aFormat Spinel formatter to pack the item. |
| * @param[in] ... Variable arguments list. |
| * |
| * @retval OT_ERROR_NONE Successfully removed item from the property. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError Remove(spinel_prop_key_t aKey, const char *aFormat, ...); |
| |
| /** |
| * Tries to reset the co-processor. |
| * |
| * @prarm[in] aResetType The reset type, SPINEL_RESET_PLATFORM, SPINEL_RESET_STACK, or SPINEL_RESET_BOOTLOADER. |
| * |
| * @retval OT_ERROR_NONE Successfully removed item from the property. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_NOT_CAPABLE Requested reset type is not supported by the co-processor |
| * |
| */ |
| otError SendReset(uint8_t aResetType); |
| |
| /** |
| * Returns the radio Spinel metrics. |
| * |
| * @returns The radio Spinel metrics. |
| * |
| */ |
| const otRadioSpinelMetrics *GetRadioSpinelMetrics(void) const { return &mRadioSpinelMetrics; } |
| |
| #if OPENTHREAD_CONFIG_PLATFORM_POWER_CALIBRATION_ENABLE |
| /** |
| * Add a calibrated power of the specified channel to the power calibration table. |
| * |
| * @param[in] aChannel The radio channel. |
| * @param[in] aActualPower The actual power in 0.01dBm. |
| * @param[in] aRawPowerSetting A pointer to the raw power setting byte array. |
| * @param[in] aRawPowerSettingLength The length of the @p aRawPowerSetting. |
| * |
| * @retval OT_ERROR_NONE Successfully added the calibrated power to the power calibration table. |
| * @retval OT_ERROR_NO_BUFS No available entry in the power calibration table. |
| * @retval OT_ERROR_INVALID_ARGS The @p aChannel, @p aActualPower or @p aRawPowerSetting is invalid. |
| * @retval OT_ERROR_NOT_IMPLEMENTED This feature is not implemented. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError AddCalibratedPower(uint8_t aChannel, |
| int16_t aActualPower, |
| const uint8_t *aRawPowerSetting, |
| uint16_t aRawPowerSettingLength); |
| |
| /** |
| * Clear all calibrated powers from the power calibration table. |
| * |
| * @retval OT_ERROR_NONE Successfully cleared all calibrated powers from the power calibration table. |
| * @retval OT_ERROR_NOT_IMPLEMENTED This feature is not implemented. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError ClearCalibratedPowers(void); |
| |
| /** |
| * Set the target power for the given channel. |
| * |
| * @param[in] aChannel The radio channel. |
| * @param[in] aTargetPower The target power in 0.01dBm. Passing `INT16_MAX` will disable this channel. |
| * |
| * @retval OT_ERROR_NONE Successfully set the target power. |
| * @retval OT_ERROR_INVALID_ARGS The @p aChannel or @p aTargetPower is invalid.. |
| * @retval OT_ERROR_NOT_IMPLEMENTED The feature is not implemented. |
| * @retval OT_ERROR_BUSY Failed due to another operation is on going. |
| * @retval OT_ERROR_RESPONSE_TIMEOUT Failed due to no response received from the transceiver. |
| * |
| */ |
| otError SetChannelTargetPower(uint8_t aChannel, int16_t aTargetPower); |
| #endif |
| |
| /** |
| * Convert the Spinel status code to OpenThread error code. |
| * |
| * @param[in] aStatus The Spinel status code. |
| * |
| * @retval OT_ERROR_NONE The operation has completed successfully. |
| * @retval OT_ERROR_DROP The packet was dropped. |
| * @retval OT_ERROR_NO_BUFS The operation has been prevented due to memory pressure. |
| * @retval OT_ERROR_BUSY The device is currently performing a mutuallyexclusive operation. |
| * @retval OT_ERROR_PARSE An error has occurred while parsing the command. |
| * @retval OT_ERROR_INVALID_ARGS An argument to the given operation is invalid. |
| * @retval OT_ERROR_NOT_IMPLEMENTED The given operation has not been implemented. |
| * @retval OT_ERROR_INVALID_STATE The given operation is invalid for the current state of the device. |
| * @retval OT_ERROR_NO_ACK The packet was not acknowledged. |
| * @retval OT_ERROR_NOT_FOUND The given property is not recognized. |
| * @retval OT_ERROR_FAILED The given operation has failed for some undefined reason. |
| * @retval OT_ERROR_CHANNEL_ACCESS_FAILURE The packet was not sent due to a CCA failure. |
| * @retval OT_ERROR_ALREADY The operation is already in progress or the property was already set |
| * to the given value. |
| */ |
| static otError SpinelStatusToOtError(spinel_status_t aStatus); |
| |
| #if OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT > 0 |
| /** |
| * Restore the properties of Radio Co-processor (RCP). |
| * |
| */ |
| void RestoreProperties(void); |
| #endif |
| #if OPENTHREAD_SPINEL_CONFIG_VENDOR_HOOK_ENABLE |
| /** |
| * Defines a vendor "set property handler" hook to process vendor spinel properties. |
| * |
| * The vendor handler should return `OT_ERROR_NOT_FOUND` status if it does not support "set" operation for the |
| * given property key. Otherwise, the vendor handler should behave like other property set handlers, i.e., it |
| * should first decode the value from the input spinel frame and then perform the corresponding set operation. The |
| * handler should not prepare the spinel response and therefore should not write anything to the NCP buffer. The |
| * `otError` returned from handler (other than `OT_ERROR_NOT_FOUND`) indicates the error in either parsing of the |
| * input or the error of the set operation. In case of a successful "set", `NcpBase` set command handler will call |
| * the `VendorGetPropertyHandler()` for the same property key to prepare the response. |
| * |
| * @param[in] aPropKey The spinel property key. |
| * |
| * @returns OT_ERROR_NOT_FOUND if it does not support the given property key, otherwise the error in either parsing |
| * of the input or the "set" operation. |
| * |
| */ |
| otError VendorHandleValueIs(spinel_prop_key_t aPropKey); |
| |
| /** |
| * A callback type for restoring vendor properties. |
| * |
| */ |
| typedef void (*otRadioSpinelVendorRestorePropertiesCallback)(void *context); |
| |
| /** |
| * Registers a callback to restore vendor properties. |
| * |
| * This function is used to register a callback for vendor properties recovery. When an event which needs to restore |
| * properties occurs (such as an unexpected RCP reset), the user can restore the vendor properties via the callback. |
| * |
| * @param[in] aCallback The callback. |
| * @param[in] aContext The context. |
| * |
| */ |
| void SetVendorRestorePropertiesCallback(otRadioSpinelVendorRestorePropertiesCallback aCallback, void *aContext); |
| #endif |
| |
| private: |
| enum |
| { |
| kMaxSpinelFrame = SPINEL_FRAME_MAX_SIZE, |
| kMaxWaitTime = 2000, ///< Max time to wait for response in milliseconds. |
| kVersionStringSize = 128, ///< Max size of version string. |
| kCapsBufferSize = 100, ///< Max buffer size used to store `SPINEL_PROP_CAPS` value. |
| kChannelMaskBufferSize = 32, ///< Max buffer size used to store `SPINEL_PROP_PHY_CHAN_SUPPORTED` value. |
| }; |
| |
| enum State |
| { |
| kStateDisabled, ///< Radio is disabled. |
| kStateSleep, ///< Radio is sleep. |
| kStateReceive, ///< Radio is in receive mode. |
| kStateTransmitting, ///< Frame passed to radio for transmission, waiting for done event from radio. |
| kStateTransmitDone, ///< Radio indicated frame transmission is done. |
| }; |
| |
| static constexpr uint32_t kUsPerMs = 1000; ///< Microseconds per millisecond. |
| static constexpr uint32_t kMsPerSec = 1000; ///< Milliseconds per second. |
| static constexpr uint32_t kUsPerSec = kUsPerMs * kMsPerSec; ///< Microseconds per second. |
| static constexpr uint64_t kTxWaitUs = |
| OPENTHREAD_SPINEL_CONFIG_RCP_TX_WAIT_TIME_SECS * |
| kUsPerSec; ///< Maximum time of waiting for `TransmitDone` event, in microseconds. |
| |
| typedef otError (RadioSpinel::*ResponseHandler)(const uint8_t *aBuffer, uint16_t aLength); |
| |
| static void HandleReceivedFrame(void *aContext); |
| |
| void ResetRcp(bool aResetRadio); |
| otError CheckSpinelVersion(void); |
| otError CheckRadioCapabilities(void); |
| otError CheckRcpApiVersion(bool aSupportsRcpApiVersion, bool aSupportsRcpMinHostApiVersion); |
| |
| /** |
| * Triggers a state transfer of the state machine. |
| * |
| */ |
| void ProcessRadioStateMachine(void); |
| |
| /** |
| * Processes the frame queue. |
| * |
| */ |
| void ProcessFrameQueue(void); |
| |
| spinel_tid_t GetNextTid(void); |
| void FreeTid(spinel_tid_t tid) { mCmdTidsInUse &= ~(1 << tid); } |
| |
| otError RequestV(uint32_t aCommand, spinel_prop_key_t aKey, const char *aFormat, va_list aArgs); |
| otError Request(uint32_t aCommand, spinel_prop_key_t aKey, const char *aFormat, ...); |
| otError RequestWithPropertyFormat(const char *aPropertyFormat, |
| uint32_t aCommand, |
| spinel_prop_key_t aKey, |
| const char *aFormat, |
| ...); |
| otError RequestWithPropertyFormatV(const char *aPropertyFormat, |
| uint32_t aCommand, |
| spinel_prop_key_t aKey, |
| const char *aFormat, |
| va_list aArgs); |
| otError RequestWithExpectedCommandV(uint32_t aExpectedCommand, |
| uint32_t aCommand, |
| spinel_prop_key_t aKey, |
| const char *aFormat, |
| va_list aArgs); |
| otError WaitResponse(bool aHandleRcpTimeout = true); |
| otError SendCommand(uint32_t aCommand, |
| spinel_prop_key_t aKey, |
| spinel_tid_t aTid, |
| const char *aFormat, |
| va_list aArgs); |
| otError ParseRadioFrame(otRadioFrame &aFrame, const uint8_t *aBuffer, uint16_t aLength, spinel_ssize_t &aUnpacked); |
| |
| /** |
| * Returns if the property changed event is safe to be handled now. |
| * |
| * If a property handler will go up to core stack, it may cause reentrant issue of `Hdlc::Decode()` and |
| * `WaitResponse()`. |
| * |
| * @param[in] aKey The identifier of the property. |
| * |
| * @returns Whether this property is safe to be handled now. |
| * |
| */ |
| bool IsSafeToHandleNow(spinel_prop_key_t aKey) const |
| { |
| return !(aKey == SPINEL_PROP_STREAM_RAW || aKey == SPINEL_PROP_MAC_ENERGY_SCAN_RESULT); |
| } |
| |
| /** |
| * Checks whether given interface ID is part of list of IIDs to be allowed. |
| * |
| * @param[in] aIid Spinel Interface ID. |
| * |
| * @retval TRUE Given IID present in allow list. |
| * @retval FALSE Otherwise. |
| * |
| */ |
| inline bool IsFrameForUs(spinel_iid_t aIid); |
| |
| void HandleNotification(SpinelInterface::RxFrameBuffer &aFrameBuffer); |
| void HandleNotification(const uint8_t *aFrame, uint16_t aLength); |
| void HandleValueIs(spinel_prop_key_t aKey, const uint8_t *aBuffer, uint16_t aLength); |
| |
| void HandleResponse(const uint8_t *aBuffer, uint16_t aLength); |
| void HandleTransmitDone(uint32_t aCommand, spinel_prop_key_t aKey, const uint8_t *aBuffer, uint16_t aLength); |
| void HandleWaitingResponse(uint32_t aCommand, spinel_prop_key_t aKey, const uint8_t *aBuffer, uint16_t aLength); |
| |
| void RadioReceive(void); |
| |
| void TransmitDone(otRadioFrame *aFrame, otRadioFrame *aAckFrame, otError aError); |
| |
| void CalcRcpTimeOffset(void); |
| |
| void HandleRcpUnexpectedReset(spinel_status_t aStatus); |
| void HandleRcpTimeout(void); |
| void RecoverFromRcpFailure(void); |
| |
| void UpdateParseErrorCount(otError aError) |
| { |
| mRadioSpinelMetrics.mSpinelParseErrorCount += (aError == OT_ERROR_PARSE) ? 1 : 0; |
| } |
| |
| otError SetMacKey(uint8_t aKeyIdMode, |
| uint8_t aKeyId, |
| const otMacKey &aPrevKey, |
| const otMacKey &aCurrKey, |
| const otMacKey &NextKey); |
| #if OPENTHREAD_CONFIG_PLATFORM_KEY_REFERENCES_ENABLE |
| static otError ReadMacKey(const otMacKeyMaterial &aKeyMaterial, otMacKey &aKey); |
| #endif |
| |
| otInstance *mInstance; |
| |
| SpinelInterface::RxFrameBuffer mRxFrameBuffer; |
| SpinelInterface *mSpinelInterface; |
| |
| RadioSpinelCallbacks mCallbacks; ///< Callbacks for notifications of higher layer. |
| |
| uint16_t mCmdTidsInUse; ///< Used transaction ids. |
| spinel_tid_t mCmdNextTid; ///< Next available transaction id. |
| spinel_tid_t mTxRadioTid; ///< The transaction id used to send a radio frame. |
| spinel_tid_t mWaitingTid; ///< The transaction id of current transaction. |
| spinel_prop_key_t mWaitingKey; ///< The property key of current transaction. |
| const char *mPropertyFormat; ///< The spinel property format of current transaction. |
| va_list mPropertyArgs; ///< The arguments pack or unpack spinel property of current transaction. |
| uint32_t mExpectedCommand; ///< Expected response command of current transaction. |
| otError mError; ///< The result of current transaction. |
| spinel_iid_t mIid; ///< The spinel interface id used by this process. |
| spinel_iid_t mIidList[kSpinelHeaderMaxNumIid]; ///< Array of interface ids to accept the incoming spinel frames. |
| |
| uint8_t mRxPsdu[OT_RADIO_FRAME_MAX_SIZE]; |
| uint8_t mTxPsdu[OT_RADIO_FRAME_MAX_SIZE]; |
| uint8_t mAckPsdu[OT_RADIO_FRAME_MAX_SIZE]; |
| otRadioFrame mRxRadioFrame; |
| otRadioFrame mTxRadioFrame; |
| otRadioFrame mAckRadioFrame; |
| otRadioFrame *mTransmitFrame; ///< Points to the frame to send |
| |
| otExtAddress mExtendedAddress; |
| uint16_t mShortAddress; |
| uint16_t mPanId; |
| uint8_t mChannel; |
| int8_t mRxSensitivity; |
| otError mTxError; |
| static char sVersion[kVersionStringSize]; |
| static otExtAddress sIeeeEui64; |
| static otRadioCaps sRadioCaps; |
| |
| State mState; |
| bool mIsPromiscuous : 1; ///< Promiscuous mode. |
| bool mRxOnWhenIdle : 1; ///< RxOnWhenIdle mode. |
| bool mIsTimeSynced : 1; ///< Host has calculated the time difference between host and RCP. |
| |
| static bool sIsReady; ///< NCP ready. |
| static bool sSupportsLogStream; ///< RCP supports `LOG_STREAM` property with OpenThread log meta-data format. |
| static bool sSupportsResetToBootloader; ///< RCP supports resetting into bootloader mode. |
| |
| #if OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT > 0 |
| |
| enum { |
| kRcpFailureNone, |
| kRcpFailureTimeout, |
| kRcpFailureUnexpectedReset, |
| }; |
| |
| bool mResetRadioOnStartup : 1; ///< Whether should send reset command when init. |
| int16_t mRcpFailureCount; ///< Count of consecutive RCP failures. |
| uint8_t mRcpFailure : 2; ///< RCP failure reason, should recover and retry operation. |
| |
| // Properties set by core. |
| uint8_t mKeyIdMode; |
| uint8_t mKeyId; |
| otMacKey mPrevKey; |
| otMacKey mCurrKey; |
| otMacKey mNextKey; |
| uint16_t mSrcMatchShortEntries[OPENTHREAD_CONFIG_MLE_MAX_CHILDREN]; |
| int16_t mSrcMatchShortEntryCount; |
| otExtAddress mSrcMatchExtEntries[OPENTHREAD_CONFIG_MLE_MAX_CHILDREN]; |
| int16_t mSrcMatchExtEntryCount; |
| uint8_t mScanChannel; |
| uint16_t mScanDuration; |
| int8_t mCcaEnergyDetectThreshold; |
| int8_t mTransmitPower; |
| int8_t mFemLnaGain; |
| uint32_t mMacFrameCounter; |
| bool mCoexEnabled : 1; |
| |
| bool mMacKeySet : 1; ///< Whether MAC key has been set. |
| bool mCcaEnergyDetectThresholdSet : 1; ///< Whether CCA energy detect threshold has been set. |
| bool mTransmitPowerSet : 1; ///< Whether transmit power has been set. |
| bool mCoexEnabledSet : 1; ///< Whether coex enabled has been set. |
| bool mFemLnaGainSet : 1; ///< Whether FEM LNA gain has been set. |
| bool mEnergyScanning : 1; ///< If fails while scanning, restarts scanning. |
| bool mMacFrameCounterSet : 1; ///< Whether the MAC frame counter has been set. |
| |
| #endif // OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT > 0 |
| |
| #if OPENTHREAD_CONFIG_DIAG_ENABLE |
| bool mDiagMode; |
| char *mDiagOutput; |
| size_t mDiagOutputMaxLen; |
| #endif |
| |
| uint64_t mTxRadioEndUs; |
| uint64_t mRadioTimeRecalcStart; ///< When to recalculate RCP time offset. |
| uint64_t mRadioTimeOffset; ///< Time difference with estimated RCP time minus host time. |
| |
| MaxPowerTable mMaxPowerTable; |
| |
| otRadioSpinelMetrics mRadioSpinelMetrics; |
| |
| #if OPENTHREAD_SPINEL_CONFIG_VENDOR_HOOK_ENABLE |
| otRadioSpinelVendorRestorePropertiesCallback mVendorRestorePropertiesCallback; |
| void *mVendorRestorePropertiesContext; |
| #endif |
| }; |
| |
| } // namespace Spinel |
| } // namespace ot |
| |
| #endif // RADIO_SPINEL_HPP_ |
