/* apps/ecparam.c */
/*
 * Written by Nils Larsch for the OpenSSL project.
 */
/* ====================================================================
 * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer. 
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */
/* ====================================================================
 * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
 *
 * Portions of the attached software ("Contribution") are developed by 
 * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
 *
 * The Contribution is licensed pursuant to the OpenSSL open source
 * license provided above.
 *
 * The elliptic curve binary polynomial software is originally written by 
 * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
 *
 */

#include <openssl/opensslconf.h>
#ifndef OPENSSL_NO_EC
#include <assert.h>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <string.h>
#include "apps.h"
#include <openssl/bio.h>
#include <openssl/err.h>
#include <openssl/bn.h>
#include <openssl/ec.h>
#include <openssl/x509.h>
#include <openssl/pem.h>

#undef PROG
#define PROG	ecparam_main

/* -inform arg      - input format - default PEM (DER or PEM)
 * -outform arg     - output format - default PEM
 * -in  arg         - input file  - default stdin
 * -out arg         - output file - default stdout
 * -noout           - do not print the ec parameter
 * -text            - print the ec parameters in text form
 * -check           - validate the ec parameters
 * -C               - print a 'C' function creating the parameters
 * -name arg        - use the ec parameters with 'short name' name
 * -list_curves     - prints a list of all currently available curve 'short names'
 * -conv_form arg   - specifies the point conversion form 
 *                  - possible values: compressed
 *                                     uncompressed (default)
 *                                     hybrid
 * -param_enc arg   - specifies the way the ec parameters are encoded
 *                    in the asn1 der encoding
 *                    possible values: named_curve (default)
 *                                     explicit
 * -no_seed         - if 'explicit' parameters are choosen do not use the seed
 * -genkey          - generate ec key
 * -rand file       - files to use for random number input
 * -engine e        - use engine e, possibly a hardware device
 */


static int ecparam_print_var(BIO *,BIGNUM *,const char *,int,unsigned char *);

int MAIN(int, char **);

int MAIN(int argc, char **argv)
	{
	EC_GROUP *group = NULL;
	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED; 
	int 	new_form = 0;
	int 	asn1_flag = OPENSSL_EC_NAMED_CURVE;
	int 	new_asn1_flag = 0;
	char 	*curve_name = NULL, *inrand = NULL;
	int	list_curves = 0, no_seed = 0, check = 0,
		badops = 0, text = 0, i, need_rand = 0, genkey = 0;
	char	*infile = NULL, *outfile = NULL, *prog;
	BIO 	*in = NULL, *out = NULL;
	int 	informat, outformat, noout = 0, C = 0, ret = 1;
	char	*engine = NULL;

	BIGNUM	*ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
		*ec_gen = NULL, *ec_order = NULL, *ec_cofactor = NULL;
	unsigned char *buffer = NULL;

	apps_startup();

	if (bio_err == NULL)
		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);

	if (!load_config(bio_err, NULL))
		goto end;

	informat=FORMAT_PEM;
	outformat=FORMAT_PEM;

	prog=argv[0];
	argc--;
	argv++;
	while (argc >= 1)
		{
		if 	(strcmp(*argv,"-inform") == 0)
			{
			if (--argc < 1) goto bad;
			informat=str2fmt(*(++argv));
			}
		else if (strcmp(*argv,"-outform") == 0)
			{
			if (--argc < 1) goto bad;
			outformat=str2fmt(*(++argv));
			}
		else if (strcmp(*argv,"-in") == 0)
			{
			if (--argc < 1) goto bad;
			infile= *(++argv);
			}
		else if (strcmp(*argv,"-out") == 0)
			{
			if (--argc < 1) goto bad;
			outfile= *(++argv);
			}
		else if (strcmp(*argv,"-text") == 0)
			text = 1;
		else if (strcmp(*argv,"-C") == 0)
			C = 1;
		else if (strcmp(*argv,"-check") == 0)
			check = 1;
		else if (strcmp (*argv, "-name") == 0)
			{
			if (--argc < 1)
				goto bad;
			curve_name = *(++argv);
			}
		else if (strcmp(*argv, "-list_curves") == 0)
			list_curves = 1;
		else if (strcmp(*argv, "-conv_form") == 0)
			{
			if (--argc < 1)
				goto bad;
			++argv;
			new_form = 1;
			if (strcmp(*argv, "compressed") == 0)
				form = POINT_CONVERSION_COMPRESSED;
			else if (strcmp(*argv, "uncompressed") == 0)
				form = POINT_CONVERSION_UNCOMPRESSED;
			else if (strcmp(*argv, "hybrid") == 0)
				form = POINT_CONVERSION_HYBRID;
			else
				goto bad;
			}
		else if (strcmp(*argv, "-param_enc") == 0)
			{
			if (--argc < 1)
				goto bad;
			++argv;
			new_asn1_flag = 1;
			if (strcmp(*argv, "named_curve") == 0)
				asn1_flag = OPENSSL_EC_NAMED_CURVE;
			else if (strcmp(*argv, "explicit") == 0)
				asn1_flag = 0;
			else
				goto bad;
			}
		else if (strcmp(*argv, "-no_seed") == 0)
			no_seed = 1;
		else if (strcmp(*argv, "-noout") == 0)
			noout=1;
		else if (strcmp(*argv,"-genkey") == 0)
			{
			genkey=1;
			need_rand=1;
			}
		else if (strcmp(*argv, "-rand") == 0)
			{
			if (--argc < 1) goto bad;
			inrand= *(++argv);
			need_rand=1;
			}
		else if(strcmp(*argv, "-engine") == 0)
			{
			if (--argc < 1) goto bad;
			engine = *(++argv);
			}	
		else
			{
			BIO_printf(bio_err,"unknown option %s\n",*argv);
			badops=1;
			break;
			}
		argc--;
		argv++;
		}

	if (badops)
		{
bad:
		BIO_printf(bio_err, "%s [options] <infile >outfile\n",prog);
		BIO_printf(bio_err, "where options are\n");
		BIO_printf(bio_err, " -inform arg       input format - "
				"default PEM (DER or PEM)\n");
		BIO_printf(bio_err, " -outform arg      output format - "
				"default PEM\n");
		BIO_printf(bio_err, " -in  arg          input file  - "
				"default stdin\n");
		BIO_printf(bio_err, " -out arg          output file - "
				"default stdout\n");
		BIO_printf(bio_err, " -noout            do not print the "
				"ec parameter\n");
		BIO_printf(bio_err, " -text             print the ec "
				"parameters in text form\n");
		BIO_printf(bio_err, " -check            validate the ec "
				"parameters\n");
		BIO_printf(bio_err, " -C                print a 'C' "
				"function creating the parameters\n");
		BIO_printf(bio_err, " -name arg         use the "
				"ec parameters with 'short name' name\n");
		BIO_printf(bio_err, " -list_curves      prints a list of "
				"all currently available curve 'short names'\n");
		BIO_printf(bio_err, " -conv_form arg    specifies the "
				"point conversion form \n");
		BIO_printf(bio_err, "                   possible values:"
				" compressed\n");
		BIO_printf(bio_err, "                                   "
				" uncompressed (default)\n");
		BIO_printf(bio_err, "                                   "
				" hybrid\n");
		BIO_printf(bio_err, " -param_enc arg    specifies the way"
				" the ec parameters are encoded\n");
		BIO_printf(bio_err, "                   in the asn1 der "
				"encoding\n");
		BIO_printf(bio_err, "                   possible values:"
				" named_curve (default)\n");
		BIO_printf(bio_err, "                                   "
				" explicit\n");
		BIO_printf(bio_err, " -no_seed          if 'explicit'"
				" parameters are choosen do not"
				" use the seed\n");
		BIO_printf(bio_err, " -genkey           generate ec"
				" key\n");
		BIO_printf(bio_err, " -rand file        files to use for"
				" random number input\n");
		BIO_printf(bio_err, " -engine e         use engine e, "
				"possibly a hardware device\n");
		goto end;
		}

	ERR_load_crypto_strings();

	in=BIO_new(BIO_s_file());
	out=BIO_new(BIO_s_file());
	if ((in == NULL) || (out == NULL))
		{
		ERR_print_errors(bio_err);
		goto end;
		}

	if (infile == NULL)
		BIO_set_fp(in,stdin,BIO_NOCLOSE);
	else
		{
		if (BIO_read_filename(in,infile) <= 0)
			{
			perror(infile);
			goto end;
			}
		}
	if (outfile == NULL)
		{
		BIO_set_fp(out,stdout,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
		{
		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
		out = BIO_push(tmpbio, out);
		}
#endif
		}
	else
		{
		if (BIO_write_filename(out,outfile) <= 0)
			{
			perror(outfile);
			goto end;
			}
		}

#ifndef OPENSSL_NO_ENGINE
	setup_engine(bio_err, engine, 0);
#endif

	if (list_curves)
		{
		EC_builtin_curve *curves = NULL;
		size_t crv_len = 0;
		size_t n = 0;

		crv_len = EC_get_builtin_curves(NULL, 0);

		curves = OPENSSL_malloc((int)(sizeof(EC_builtin_curve) * crv_len));

		if (curves == NULL)
			goto end;

		if (!EC_get_builtin_curves(curves, crv_len))
			{
			OPENSSL_free(curves);
			goto end;
			}

		
		for (n = 0; n < crv_len; n++)
			{
			const char *comment;
			const char *sname;
			comment = curves[n].comment;
			sname   = OBJ_nid2sn(curves[n].nid);
			if (comment == NULL)
				comment = "CURVE DESCRIPTION NOT AVAILABLE";
			if (sname == NULL)
				sname = "";

			BIO_printf(out, "  %-10s: ", sname);
			BIO_printf(out, "%s\n", comment);
			} 

		OPENSSL_free(curves);
		ret = 0;
		goto end;
		}

	if (curve_name != NULL)
		{
		int nid;

		/* workaround for the SECG curve names secp192r1
		 * and secp256r1 (which are the same as the curves
		 * prime192v1 and prime256v1 defined in X9.62)
		 */
		if (!strcmp(curve_name, "secp192r1"))
			{
			BIO_printf(bio_err, "using curve name prime192v1 "
				"instead of secp192r1\n");
			nid = NID_X9_62_prime192v1;
			}
		else if (!strcmp(curve_name, "secp256r1"))
			{
			BIO_printf(bio_err, "using curve name prime256v1 "
				"instead of secp256r1\n");
			nid = NID_X9_62_prime256v1;
			}
		else
			nid = OBJ_sn2nid(curve_name);
	
		if (nid == 0)
			{
			BIO_printf(bio_err, "unknown curve name (%s)\n", 
				curve_name);
			goto end;
			}

		group = EC_GROUP_new_by_curve_name(nid);
		if (group == NULL)
			{
			BIO_printf(bio_err, "unable to create curve (%s)\n", 
				curve_name);
			goto end;
			}
		EC_GROUP_set_asn1_flag(group, asn1_flag);
		EC_GROUP_set_point_conversion_form(group, form);
		}
	else if (informat == FORMAT_ASN1)
		{
		group = d2i_ECPKParameters_bio(in, NULL);
		}
	else if (informat == FORMAT_PEM)
		{
		group = PEM_read_bio_ECPKParameters(in,NULL,NULL,NULL);
		}
	else
		{
		BIO_printf(bio_err, "bad input format specified\n");
		goto end;
		}

	if (group == NULL)
		{
		BIO_printf(bio_err, 
			"unable to load elliptic curve parameters\n");
		ERR_print_errors(bio_err);
		goto end;
		}

	if (new_form)
		EC_GROUP_set_point_conversion_form(group, form);

	if (new_asn1_flag)
		EC_GROUP_set_asn1_flag(group, asn1_flag);

	if (no_seed)
		{
		EC_GROUP_set_seed(group, NULL, 0);
		}

	if (text)
		{
		if (!ECPKParameters_print(out, group, 0))
			goto end;
		}

	if (check)
		{
		if (group == NULL)
			BIO_printf(bio_err, "no elliptic curve parameters\n");
		BIO_printf(bio_err, "checking elliptic curve parameters: ");
		if (!EC_GROUP_check(group, NULL))
			{
			BIO_printf(bio_err, "failed\n");
			ERR_print_errors(bio_err);
			}
		else
			BIO_printf(bio_err, "ok\n");
			
		}

	if (C)
		{
		size_t	buf_len = 0, tmp_len = 0;
		const EC_POINT *point;
		int	is_prime, len = 0;
		const EC_METHOD *meth = EC_GROUP_method_of(group);

		if ((ec_p = BN_new()) == NULL || (ec_a = BN_new()) == NULL ||
		    (ec_b = BN_new()) == NULL || (ec_gen = BN_new()) == NULL ||
		    (ec_order = BN_new()) == NULL || 
		    (ec_cofactor = BN_new()) == NULL )
			{
			perror("OPENSSL_malloc");
			goto end;
			}

		is_prime = (EC_METHOD_get_field_type(meth) == 
			NID_X9_62_prime_field);

		if (is_prime)
			{
			if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a,
				ec_b, NULL))
				goto end;
			}
		else
			{
			/* TODO */
			goto end;
			}

		if ((point = EC_GROUP_get0_generator(group)) == NULL)
			goto end;
		if (!EC_POINT_point2bn(group, point, 
			EC_GROUP_get_point_conversion_form(group), ec_gen, 
			NULL))
			goto end;
		if (!EC_GROUP_get_order(group, ec_order, NULL))
			goto end;
		if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
			goto end;

		if (!ec_p || !ec_a || !ec_b || !ec_gen || 
			!ec_order || !ec_cofactor)
			goto end;

		len = BN_num_bits(ec_order);

		if ((tmp_len = (size_t)BN_num_bytes(ec_p)) > buf_len)
			buf_len = tmp_len;
		if ((tmp_len = (size_t)BN_num_bytes(ec_a)) > buf_len)
			buf_len = tmp_len;
		if ((tmp_len = (size_t)BN_num_bytes(ec_b)) > buf_len)
			buf_len = tmp_len;
		if ((tmp_len = (size_t)BN_num_bytes(ec_gen)) > buf_len)
			buf_len = tmp_len;
		if ((tmp_len = (size_t)BN_num_bytes(ec_order)) > buf_len)
			buf_len = tmp_len;
		if ((tmp_len = (size_t)BN_num_bytes(ec_cofactor)) > buf_len)
			buf_len = tmp_len;

		buffer = (unsigned char *)OPENSSL_malloc(buf_len);

		if (buffer == NULL)
			{
			perror("OPENSSL_malloc");
			goto end;
			}

		ecparam_print_var(out, ec_p, "ec_p", len, buffer);
		ecparam_print_var(out, ec_a, "ec_a", len, buffer);
		ecparam_print_var(out, ec_b, "ec_b", len, buffer);
		ecparam_print_var(out, ec_gen, "ec_gen", len, buffer);
		ecparam_print_var(out, ec_order, "ec_order", len, buffer);
		ecparam_print_var(out, ec_cofactor, "ec_cofactor", len, 
			buffer);

		BIO_printf(out, "\n\n");

		BIO_printf(out, "EC_GROUP *get_ec_group_%d(void)\n\t{\n", len);
		BIO_printf(out, "\tint ok=0;\n");
		BIO_printf(out, "\tEC_GROUP *group = NULL;\n");
		BIO_printf(out, "\tEC_POINT *point = NULL;\n");
		BIO_printf(out, "\tBIGNUM   *tmp_1 = NULL, *tmp_2 = NULL, "
				"*tmp_3 = NULL;\n\n");
		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_p_%d, "
				"sizeof(ec_p_%d), NULL)) == NULL)\n\t\t"
				"goto err;\n", len, len);
		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_a_%d, "
				"sizeof(ec_a_%d), NULL)) == NULL)\n\t\t"
				"goto err;\n", len, len);
		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_b_%d, "
				"sizeof(ec_b_%d), NULL)) == NULL)\n\t\t"
				"goto err;\n", len, len);
		if (is_prime)
			{
			BIO_printf(out, "\tif ((group = EC_GROUP_new_curve_"
				"GFp(tmp_1, tmp_2, tmp_3, NULL)) == NULL)"
				"\n\t\tgoto err;\n\n");
			}
		else
			{
			/* TODO */
			goto end;
			}
		BIO_printf(out, "\t/* build generator */\n");
		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_gen_%d, "
				"sizeof(ec_gen_%d), tmp_1)) == NULL)"
				"\n\t\tgoto err;\n", len, len);
		BIO_printf(out, "\tpoint = EC_POINT_bn2point(group, tmp_1, "
				"NULL, NULL);\n");
		BIO_printf(out, "\tif (point == NULL)\n\t\tgoto err;\n");
		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_order_%d, "
				"sizeof(ec_order_%d), tmp_2)) == NULL)"
				"\n\t\tgoto err;\n", len, len);
		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_cofactor_%d, "
				"sizeof(ec_cofactor_%d), tmp_3)) == NULL)"
				"\n\t\tgoto err;\n", len, len);
		BIO_printf(out, "\tif (!EC_GROUP_set_generator(group, point,"
				" tmp_2, tmp_3))\n\t\tgoto err;\n");
		BIO_printf(out, "\n\tok=1;\n");
		BIO_printf(out, "err:\n");
		BIO_printf(out, "\tif (tmp_1)\n\t\tBN_free(tmp_1);\n");
		BIO_printf(out, "\tif (tmp_2)\n\t\tBN_free(tmp_2);\n");
		BIO_printf(out, "\tif (tmp_3)\n\t\tBN_free(tmp_3);\n");
		BIO_printf(out, "\tif (point)\n\t\tEC_POINT_free(point);\n");
		BIO_printf(out, "\tif (!ok)\n");
		BIO_printf(out, "\t\t{\n");
		BIO_printf(out, "\t\tEC_GROUP_free(group);\n");
		BIO_printf(out, "\t\tgroup = NULL;\n");
		BIO_printf(out, "\t\t}\n");
		BIO_printf(out, "\treturn(group);\n\t}\n");
	}

	if (!noout)
		{
		if (outformat == FORMAT_ASN1)
			i = i2d_ECPKParameters_bio(out, group);
		else if (outformat == FORMAT_PEM)
			i = PEM_write_bio_ECPKParameters(out, group);
		else	
			{
			BIO_printf(bio_err,"bad output format specified for"
				" outfile\n");
			goto end;
			}
		if (!i)
			{
			BIO_printf(bio_err, "unable to write elliptic "
				"curve parameters\n");
			ERR_print_errors(bio_err);
			goto end;
			}
		}
	
	if (need_rand)
		{
		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
		if (inrand != NULL)
			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
				app_RAND_load_files(inrand));
		}

	if (genkey)
		{
		EC_KEY *eckey = EC_KEY_new();

		if (eckey == NULL)
			goto end;

		assert(need_rand);

		if (EC_KEY_set_group(eckey, group) == 0)
			goto end;
		
		if (!EC_KEY_generate_key(eckey))
			{
			EC_KEY_free(eckey);
			goto end;
			}
		if (outformat == FORMAT_ASN1)
			i = i2d_ECPrivateKey_bio(out, eckey);
		else if (outformat == FORMAT_PEM)
			i = PEM_write_bio_ECPrivateKey(out, eckey, NULL,
				NULL, 0, NULL, NULL);
		else	
			{
			BIO_printf(bio_err, "bad output format specified "
				"for outfile\n");
			EC_KEY_free(eckey);
			goto end;
			}
		EC_KEY_free(eckey);
		}

	if (need_rand)
		app_RAND_write_file(NULL, bio_err);

	ret=0;
end:
	if (ec_p)
		BN_free(ec_p);
	if (ec_a)
		BN_free(ec_a);
	if (ec_b)
		BN_free(ec_b);
	if (ec_gen)
		BN_free(ec_gen);
	if (ec_order)
		BN_free(ec_order);
	if (ec_cofactor)
		BN_free(ec_cofactor);
	if (buffer)
		OPENSSL_free(buffer);
	if (in != NULL)
		BIO_free(in);
	if (out != NULL)
		BIO_free_all(out);
	if (group != NULL)
		EC_GROUP_free(group);
	apps_shutdown();
	OPENSSL_EXIT(ret);
}

static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
	int len, unsigned char *buffer)
	{
	BIO_printf(out, "static unsigned char %s_%d[] = {", var, len);
	if (BN_is_zero(in))
		BIO_printf(out, "\n\t0x00");
	else 
		{
		int i, l;

		l = BN_bn2bin(in, buffer);
		for (i=0; i<l-1; i++)
			{
			if ((i%12) == 0) 
				BIO_printf(out, "\n\t");
			BIO_printf(out, "0x%02X,", buffer[i]);
			}
		if ((i%12) == 0) 
			BIO_printf(out, "\n\t");
		BIO_printf(out, "0x%02X", buffer[i]);
		}
	BIO_printf(out, "\n\t};\n\n");
	return 1;
	}
#else /* !OPENSSL_NO_EC */

# if PEDANTIC
static void *dummy=&dummy;
# endif

#endif