include/openssl/ssl.h

/* ssl/ssl.h */
/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
 * All rights reserved.
 *
 * This package is an SSL implementation written
 * by Eric Young (eay@cryptsoft.com).
 * The implementation was written so as to conform with Netscapes SSL.
 * 
 * This library is free for commercial and non-commercial use as long as
 * the following conditions are aheared to.  The following conditions
 * apply to all code found in this distribution, be it the RC4, RSA,
 * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
 * included with this distribution is covered by the same copyright terms
 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
 * 
 * Copyright remains Eric Young's, and as such any Copyright notices in
 * the code are not to be removed.
 * If this package is used in a product, Eric Young should be given attribution
 * as the author of the parts of the library used.
 * This can be in the form of a textual message at program startup or
 * in documentation (online or textual) provided with the package.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *    "This product includes cryptographic software written by
 *     Eric Young (eay@cryptsoft.com)"
 *    The word 'cryptographic' can be left out if the rouines from the library
 *    being used are not cryptographic related :-).
 * 4. If you include any Windows specific code (or a derivative thereof) from 
 *    the apps directory (application code) you must include an acknowledgement:
 *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
 * 
 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * The licence and distribution terms for any publically available version or
 * derivative of this code cannot be changed.  i.e. this code cannot simply be
 * copied and put under another distribution licence
 * [including the GNU Public Licence.]
 */
/* ====================================================================
 * Copyright (c) 1998-2007 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer. 
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 * This product includes cryptographic software written by Eric Young
 * (eay@cryptsoft.com).  This product includes software written by Tim
 * Hudson (tjh@cryptsoft.com).
 *
 */
/* ====================================================================
 * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
 * ECC cipher suite support in OpenSSL originally developed by 
 * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
 */
/* ====================================================================
 * Copyright 2005 Nokia. All rights reserved.
 *
 * The portions of the attached software ("Contribution") is developed by
 * Nokia Corporation and is licensed pursuant to the OpenSSL open source
 * license.
 *
 * The Contribution, originally written by Mika Kousa and Pasi Eronen of
 * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
 * support (see RFC 4279) to OpenSSL.
 *
 * No patent licenses or other rights except those expressly stated in
 * the OpenSSL open source license shall be deemed granted or received
 * expressly, by implication, estoppel, or otherwise.
 *
 * No assurances are provided by Nokia that the Contribution does not
 * infringe the patent or other intellectual property rights of any third
 * party or that the license provides you with all the necessary rights
 * to make use of the Contribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
 * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
 * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
 * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
 * OTHERWISE.
 */

#ifndef HEADER_SSL_H 
#define HEADER_SSL_H 

#include <openssl/e_os2.h>

#ifndef OPENSSL_NO_COMP
#include <openssl/comp.h>
#endif
#ifndef OPENSSL_NO_BIO
#include <openssl/bio.h>
#endif
#ifndef OPENSSL_NO_DEPRECATED
#ifndef OPENSSL_NO_X509
#include <openssl/x509.h>
#endif
#include <openssl/crypto.h>
#include <openssl/lhash.h>
#include <openssl/buffer.h>
#endif
#include <openssl/pem.h>
#include <openssl/hmac.h>

#include <openssl/kssl.h>
#include <openssl/safestack.h>
#include <openssl/symhacks.h>

#ifdef  __cplusplus
extern "C" {
#endif

/* SSLeay version number for ASN.1 encoding of the session information */
/* Version 0 - initial version
 * Version 1 - added the optional peer certificate
 */
#define SSL_SESSION_ASN1_VERSION 0x0001

/* text strings for the ciphers */
#define SSL_TXT_NULL_WITH_MD5		SSL2_TXT_NULL_WITH_MD5			
#define SSL_TXT_RC4_128_WITH_MD5	SSL2_TXT_RC4_128_WITH_MD5		
#define SSL_TXT_RC4_128_EXPORT40_WITH_MD5 SSL2_TXT_RC4_128_EXPORT40_WITH_MD5	
#define SSL_TXT_RC2_128_CBC_WITH_MD5	SSL2_TXT_RC2_128_CBC_WITH_MD5		
#define SSL_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 SSL2_TXT_RC2_128_CBC_EXPORT40_WITH_MD5	
#define SSL_TXT_IDEA_128_CBC_WITH_MD5	SSL2_TXT_IDEA_128_CBC_WITH_MD5		
#define SSL_TXT_DES_64_CBC_WITH_MD5	SSL2_TXT_DES_64_CBC_WITH_MD5		
#define SSL_TXT_DES_64_CBC_WITH_SHA	SSL2_TXT_DES_64_CBC_WITH_SHA		
#define SSL_TXT_DES_192_EDE3_CBC_WITH_MD5 SSL2_TXT_DES_192_EDE3_CBC_WITH_MD5	
#define SSL_TXT_DES_192_EDE3_CBC_WITH_SHA SSL2_TXT_DES_192_EDE3_CBC_WITH_SHA	

/*    VRS Additional Kerberos5 entries
 */
#define SSL_TXT_KRB5_DES_64_CBC_SHA   SSL3_TXT_KRB5_DES_64_CBC_SHA
#define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA
#define SSL_TXT_KRB5_RC4_128_SHA      SSL3_TXT_KRB5_RC4_128_SHA
#define SSL_TXT_KRB5_IDEA_128_CBC_SHA SSL3_TXT_KRB5_IDEA_128_CBC_SHA
#define SSL_TXT_KRB5_DES_64_CBC_MD5   SSL3_TXT_KRB5_DES_64_CBC_MD5       
#define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5       
#define SSL_TXT_KRB5_RC4_128_MD5      SSL3_TXT_KRB5_RC4_128_MD5
#define SSL_TXT_KRB5_IDEA_128_CBC_MD5 SSL3_TXT_KRB5_IDEA_128_CBC_MD5 

#define SSL_TXT_KRB5_DES_40_CBC_SHA   SSL3_TXT_KRB5_DES_40_CBC_SHA 
#define SSL_TXT_KRB5_RC2_40_CBC_SHA   SSL3_TXT_KRB5_RC2_40_CBC_SHA 
#define SSL_TXT_KRB5_RC4_40_SHA	      SSL3_TXT_KRB5_RC4_40_SHA
#define SSL_TXT_KRB5_DES_40_CBC_MD5   SSL3_TXT_KRB5_DES_40_CBC_MD5 
#define SSL_TXT_KRB5_RC2_40_CBC_MD5   SSL3_TXT_KRB5_RC2_40_CBC_MD5 
#define SSL_TXT_KRB5_RC4_40_MD5	      SSL3_TXT_KRB5_RC4_40_MD5

#define SSL_TXT_KRB5_DES_40_CBC_SHA   SSL3_TXT_KRB5_DES_40_CBC_SHA
#define SSL_TXT_KRB5_DES_40_CBC_MD5   SSL3_TXT_KRB5_DES_40_CBC_MD5
#define SSL_TXT_KRB5_DES_64_CBC_SHA   SSL3_TXT_KRB5_DES_64_CBC_SHA
#define SSL_TXT_KRB5_DES_64_CBC_MD5   SSL3_TXT_KRB5_DES_64_CBC_MD5
#define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA
#define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5
#define SSL_MAX_KRB5_PRINCIPAL_LENGTH  256

#define SSL_MAX_SSL_SESSION_ID_LENGTH		32
#define SSL_MAX_SID_CTX_LENGTH			32

#define SSL_MIN_RSA_MODULUS_LENGTH_IN_BYTES	(512/8)
#define SSL_MAX_KEY_ARG_LENGTH			8
#define SSL_MAX_MASTER_KEY_LENGTH		48


/* These are used to specify which ciphers to use and not to use */

#define SSL_TXT_EXP40		"EXPORT40"
#define SSL_TXT_EXP56		"EXPORT56"
#define SSL_TXT_LOW		"LOW"
#define SSL_TXT_MEDIUM		"MEDIUM"
#define SSL_TXT_HIGH		"HIGH"
#define SSL_TXT_FIPS		"FIPS"

#define SSL_TXT_kFZA		"kFZA" /* unused! */
#define	SSL_TXT_aFZA		"aFZA" /* unused! */
#define SSL_TXT_eFZA		"eFZA" /* unused! */
#define SSL_TXT_FZA		"FZA"  /* unused! */

#define	SSL_TXT_aNULL		"aNULL"
#define	SSL_TXT_eNULL		"eNULL"
#define	SSL_TXT_NULL		"NULL"

#define SSL_TXT_kRSA		"kRSA"
#define SSL_TXT_kDHr		"kDHr" /* no such ciphersuites supported! */
#define SSL_TXT_kDHd		"kDHd" /* no such ciphersuites supported! */
#define SSL_TXT_kDH 		"kDH"  /* no such ciphersuites supported! */
#define SSL_TXT_kEDH		"kEDH"
#define SSL_TXT_kKRB5     	"kKRB5"
#define SSL_TXT_kECDHr		"kECDHr"
#define SSL_TXT_kECDHe		"kECDHe"
#define SSL_TXT_kECDH		"kECDH"
#define SSL_TXT_kEECDH		"kEECDH"
#define SSL_TXT_kPSK            "kPSK"
#define SSL_TXT_kGOST		"kGOST"
#define SSL_TXT_kSRP		"kSRP"

#define	SSL_TXT_aRSA		"aRSA"
#define	SSL_TXT_aDSS		"aDSS"
#define	SSL_TXT_aDH		"aDH" /* no such ciphersuites supported! */
#define	SSL_TXT_aECDH		"aECDH"
#define SSL_TXT_aKRB5     	"aKRB5"
#define SSL_TXT_aECDSA		"aECDSA"
#define SSL_TXT_aPSK            "aPSK"
#define SSL_TXT_aGOST94	"aGOST94"
#define SSL_TXT_aGOST01 "aGOST01"
#define SSL_TXT_aGOST  "aGOST"

#define	SSL_TXT_DSS		"DSS"
#define SSL_TXT_DH		"DH"
#define SSL_TXT_EDH		"EDH" /* same as "kEDH:-ADH" */
#define SSL_TXT_ADH		"ADH"
#define SSL_TXT_RSA		"RSA"
#define SSL_TXT_ECDH		"ECDH"
#define SSL_TXT_EECDH		"EECDH" /* same as "kEECDH:-AECDH" */
#define SSL_TXT_AECDH		"AECDH"
#define SSL_TXT_ECDSA		"ECDSA"
#define SSL_TXT_KRB5      	"KRB5"
#define SSL_TXT_PSK             "PSK"
#define SSL_TXT_SRP		"SRP"

#define SSL_TXT_DES		"DES"
#define SSL_TXT_3DES		"3DES"
#define SSL_TXT_RC4		"RC4"
#define SSL_TXT_RC2		"RC2"
#define SSL_TXT_IDEA		"IDEA"
#define SSL_TXT_SEED		"SEED"
#define SSL_TXT_AES128		"AES128"
#define SSL_TXT_AES256		"AES256"
#define SSL_TXT_AES		"AES"
#define SSL_TXT_AES_GCM		"AESGCM"
#define SSL_TXT_CAMELLIA128	"CAMELLIA128"
#define SSL_TXT_CAMELLIA256	"CAMELLIA256"
#define SSL_TXT_CAMELLIA	"CAMELLIA"

#define SSL_TXT_MD5		"MD5"
#define SSL_TXT_SHA1		"SHA1"
#define SSL_TXT_SHA		"SHA" /* same as "SHA1" */
#define SSL_TXT_GOST94		"GOST94" 
#define SSL_TXT_GOST89MAC		"GOST89MAC" 
#define SSL_TXT_SHA256		"SHA256"
#define SSL_TXT_SHA384		"SHA384"

#define SSL_TXT_SSLV2		"SSLv2"
#define SSL_TXT_SSLV3		"SSLv3"
#define SSL_TXT_TLSV1		"TLSv1"
#define SSL_TXT_TLSV1_1		"TLSv1.1"
#define SSL_TXT_TLSV1_2		"TLSv1.2"

#define SSL_TXT_EXP		"EXP"
#define SSL_TXT_EXPORT		"EXPORT"

#define SSL_TXT_ALL		"ALL"

/*
 * COMPLEMENTOF* definitions. These identifiers are used to (de-select)
 * ciphers normally not being used.
 * Example: "RC4" will activate all ciphers using RC4 including ciphers
 * without authentication, which would normally disabled by DEFAULT (due
 * the "!ADH" being part of default). Therefore "RC4:!COMPLEMENTOFDEFAULT"
 * will make sure that it is also disabled in the specific selection.
 * COMPLEMENTOF* identifiers are portable between version, as adjustments
 * to the default cipher setup will also be included here.
 *
 * COMPLEMENTOFDEFAULT does not experience the same special treatment that
 * DEFAULT gets, as only selection is being done and no sorting as needed
 * for DEFAULT.
 */
#define SSL_TXT_CMPALL		"COMPLEMENTOFALL"
#define SSL_TXT_CMPDEF		"COMPLEMENTOFDEFAULT"

/* The following cipher list is used by default.
 * It also is substituted when an application-defined cipher list string
 * starts with 'DEFAULT'. */
#define SSL_DEFAULT_CIPHER_LIST	"ALL:!aNULL:!eNULL:!SSLv2"
/* As of OpenSSL 1.0.0, ssl_create_cipher_list() in ssl/ssl_ciph.c always
 * starts with a reasonable order, and all we have to do for DEFAULT is
 * throwing out anonymous and unencrypted ciphersuites!
 * (The latter are not actually enabled by ALL, but "ALL:RSA" would enable
 * some of them.)
 */

/* Used in SSL_set_shutdown()/SSL_get_shutdown(); */
#define SSL_SENT_SHUTDOWN	1
#define SSL_RECEIVED_SHUTDOWN	2

#ifdef __cplusplus
}
#endif

#ifdef  __cplusplus
extern "C" {
#endif

#if (defined(OPENSSL_NO_RSA) || defined(OPENSSL_NO_MD5)) && !defined(OPENSSL_NO_SSL2)
#define OPENSSL_NO_SSL2
#endif

#define SSL_FILETYPE_ASN1	X509_FILETYPE_ASN1
#define SSL_FILETYPE_PEM	X509_FILETYPE_PEM

/* This is needed to stop compilers complaining about the
 * 'struct ssl_st *' function parameters used to prototype callbacks
 * in SSL_CTX. */
typedef struct ssl_st *ssl_crock_st;
typedef struct tls_session_ticket_ext_st TLS_SESSION_TICKET_EXT;
typedef struct ssl_method_st SSL_METHOD;
typedef struct ssl_cipher_st SSL_CIPHER;
typedef struct ssl_session_st SSL_SESSION;

DECLARE_STACK_OF(SSL_CIPHER)

/* SRTP protection profiles for use with the use_srtp extension (RFC 5764)*/
typedef struct srtp_protection_profile_st
       {
       const char *name;
       unsigned long id;
       } SRTP_PROTECTION_PROFILE;

DECLARE_STACK_OF(SRTP_PROTECTION_PROFILE)

typedef int (*tls_session_ticket_ext_cb_fn)(SSL *s, const unsigned char *data, int len, void *arg);
typedef int (*tls_session_secret_cb_fn)(SSL *s, void *secret, int *secret_len, STACK_OF(SSL_CIPHER) *peer_ciphers, SSL_CIPHER **cipher, void *arg);


#ifndef OPENSSL_NO_SSL_INTERN

/* used to hold info on the particular ciphers used */
struct ssl_cipher_st
	{
	int valid;
	const char *name;		/* text name */
	unsigned long id;		/* id, 4 bytes, first is version */

	/* changed in 0.9.9: these four used to be portions of a single value 'algorithms' */
	unsigned long algorithm_mkey;	/* key exchange algorithm */
	unsigned long algorithm_auth;	/* server authentication */
	unsigned long algorithm_enc;	/* symmetric encryption */
	unsigned long algorithm_mac;	/* symmetric authentication */
	unsigned long algorithm_ssl;	/* (major) protocol version */

	unsigned long algo_strength;	/* strength and export flags */
	unsigned long algorithm2;	/* Extra flags */
	int strength_bits;		/* Number of bits really used */
	int alg_bits;			/* Number of bits for algorithm */
	};


/* Used to hold functions for SSLv2 or SSLv3/TLSv1 functions */
struct ssl_method_st
	{
	int version;
	int (*ssl_new)(SSL *s);
	void (*ssl_clear)(SSL *s);
	void (*ssl_free)(SSL *s);
	int (*ssl_accept)(SSL *s);
	int (*ssl_connect)(SSL *s);
	int (*ssl_read)(SSL *s,void *buf,int len);
	int (*ssl_peek)(SSL *s,void *buf,int len);
	int (*ssl_write)(SSL *s,const void *buf,int len);
	int (*ssl_shutdown)(SSL *s);
	int (*ssl_renegotiate)(SSL *s);
	int (*ssl_renegotiate_check)(SSL *s);
	long (*ssl_get_message)(SSL *s, int st1, int stn, int mt, long
		max, int *ok);
	int (*ssl_read_bytes)(SSL *s, int type, unsigned char *buf, int len, 
		int peek);
	int (*ssl_write_bytes)(SSL *s, int type, const void *buf_, int len);
	int (*ssl_dispatch_alert)(SSL *s);
	long (*ssl_ctrl)(SSL *s,int cmd,long larg,void *parg);
	long (*ssl_ctx_ctrl)(SSL_CTX *ctx,int cmd,long larg,void *parg);
	const SSL_CIPHER *(*get_cipher_by_char)(const unsigned char *ptr);
	int (*put_cipher_by_char)(const SSL_CIPHER *cipher,unsigned char *ptr);
	int (*ssl_pending)(const SSL *s);
	int (*num_ciphers)(void);
	const SSL_CIPHER *(*get_cipher)(unsigned ncipher);
	const struct ssl_method_st *(*get_ssl_method)(int version);
	long (*get_timeout)(void);
	struct ssl3_enc_method *ssl3_enc; /* Extra SSLv3/TLS stuff */
	int (*ssl_version)(void);
	long (*ssl_callback_ctrl)(SSL *s, int cb_id, void (*fp)(void));
	long (*ssl_ctx_callback_ctrl)(SSL_CTX *s, int cb_id, void (*fp)(void));
	};

/* Lets make this into an ASN.1 type structure as follows
 * SSL_SESSION_ID ::= SEQUENCE {
 *	version 		INTEGER,	-- structure version number
 *	SSLversion 		INTEGER,	-- SSL version number
 *	Cipher 			OCTET STRING,	-- the 3 byte cipher ID
 *	Session_ID 		OCTET STRING,	-- the Session ID
 *	Master_key 		OCTET STRING,	-- the master key
 *	KRB5_principal		OCTET STRING	-- optional Kerberos principal
 *	Key_Arg [ 0 ] IMPLICIT	OCTET STRING,	-- the optional Key argument
 *	Time [ 1 ] EXPLICIT	INTEGER,	-- optional Start Time
 *	Timeout [ 2 ] EXPLICIT	INTEGER,	-- optional Timeout ins seconds
 *	Peer [ 3 ] EXPLICIT	X509,		-- optional Peer Certificate
 *	Session_ID_context [ 4 ] EXPLICIT OCTET STRING,   -- the Session ID context
 *	Verify_result [ 5 ] EXPLICIT INTEGER,   -- X509_V_... code for `Peer'
 *	HostName [ 6 ] EXPLICIT OCTET STRING,   -- optional HostName from servername TLS extension 
 *	PSK_identity_hint [ 7 ] EXPLICIT OCTET STRING, -- optional PSK identity hint
 *	PSK_identity [ 8 ] EXPLICIT OCTET STRING,  -- optional PSK identity
 *	Ticket_lifetime_hint [9] EXPLICIT INTEGER, -- server's lifetime hint for session ticket
 *	Ticket [10]             EXPLICIT OCTET STRING, -- session ticket (clients only)
 *	Compression_meth [11]   EXPLICIT OCTET STRING, -- optional compression method
 *	SRP_username [ 12 ] EXPLICIT OCTET STRING -- optional SRP username
 *	}
 * Look in ssl/ssl_asn1.c for more details
 * I'm using EXPLICIT tags so I can read the damn things using asn1parse :-).
 */
struct ssl_session_st
	{
	int ssl_version;	/* what ssl version session info is
				 * being kept in here? */

	/* only really used in SSLv2 */
	unsigned int key_arg_length;
	unsigned char key_arg[SSL_MAX_KEY_ARG_LENGTH];
	int master_key_length;
	unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH];
	/* session_id - valid? */
	unsigned int session_id_length;
	unsigned char session_id[SSL_MAX_SSL_SESSION_ID_LENGTH];
	/* this is used to determine whether the session is being reused in
	 * the appropriate context. It is up to the application to set this,
	 * via SSL_new */
	unsigned int sid_ctx_length;
	unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH];

#ifndef OPENSSL_NO_KRB5
        unsigned int krb5_client_princ_len;
        unsigned char krb5_client_princ[SSL_MAX_KRB5_PRINCIPAL_LENGTH];
#endif /* OPENSSL_NO_KRB5 */
#ifndef OPENSSL_NO_PSK
	char *psk_identity_hint;
	char *psk_identity;
#endif
	/* Used to indicate that session resumption is not allowed.
	 * Applications can also set this bit for a new session via
	 * not_resumable_session_cb to disable session caching and tickets. */
	int not_resumable;

	/* The cert is the certificate used to establish this connection */
	struct sess_cert_st /* SESS_CERT */ *sess_cert;

	/* This is the cert for the other end.
	 * On clients, it will be the same as sess_cert->peer_key->x509
	 * (the latter is not enough as sess_cert is not retained
	 * in the external representation of sessions, see ssl_asn1.c). */
	X509 *peer;
	/* when app_verify_callback accepts a session where the peer's certificate
	 * is not ok, we must remember the error for session reuse: */
	long verify_result; /* only for servers */

	int references;
	long timeout;
	long time;

	unsigned int compress_meth;	/* Need to lookup the method */

	const SSL_CIPHER *cipher;
	unsigned long cipher_id;	/* when ASN.1 loaded, this
					 * needs to be used to load
					 * the 'cipher' structure */

	STACK_OF(SSL_CIPHER) *ciphers; /* shared ciphers? */

	CRYPTO_EX_DATA ex_data; /* application specific data */

	/* These are used to make removal of session-ids more
	 * efficient and to implement a maximum cache size. */
	struct ssl_session_st *prev,*next;
#ifndef OPENSSL_NO_TLSEXT
	char *tlsext_hostname;
#ifndef OPENSSL_NO_EC
	size_t tlsext_ecpointformatlist_length;
	unsigned char *tlsext_ecpointformatlist; /* peer's list */
	size_t tlsext_ellipticcurvelist_length;
	unsigned char *tlsext_ellipticcurvelist; /* peer's list */
#endif /* OPENSSL_NO_EC */
	/* RFC4507 info */
	unsigned char *tlsext_tick;	/* Session ticket */
	size_t tlsext_ticklen;		/* Session ticket length */
	long tlsext_tick_lifetime_hint;	/* Session lifetime hint in seconds */
#endif
#ifndef OPENSSL_NO_SRP
	char *srp_username;
#endif
	};

#endif

#define SSL_OP_MICROSOFT_SESS_ID_BUG			0x00000001L
#define SSL_OP_NETSCAPE_CHALLENGE_BUG			0x00000002L
/* Allow initial connection to servers that don't support RI */
#define SSL_OP_LEGACY_SERVER_CONNECT			0x00000004L
#define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG		0x00000008L
#define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG		0x00000010L
#define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER		0x00000020L
#define SSL_OP_MSIE_SSLV2_RSA_PADDING			0x00000040L /* no effect since 0.9.7h and 0.9.8b */
#define SSL_OP_SSLEAY_080_CLIENT_DH_BUG			0x00000080L
#define SSL_OP_TLS_D5_BUG				0x00000100L
#define SSL_OP_TLS_BLOCK_PADDING_BUG			0x00000200L

/* Disable SSL 3.0/TLS 1.0 CBC vulnerability workaround that was added
 * in OpenSSL 0.9.6d.  Usually (depending on the application protocol)
 * the workaround is not needed.  Unfortunately some broken SSL/TLS
 * implementations cannot handle it at all, which is why we include
 * it in SSL_OP_ALL. */
#define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS              0x00000800L /* added in 0.9.6e */

/* SSL_OP_ALL: various bug workarounds that should be rather harmless.
 *             This used to be 0x000FFFFFL before 0.9.7. */
#define SSL_OP_ALL					0x80000BFFL

/* DTLS options */
#define SSL_OP_NO_QUERY_MTU                 0x00001000L
/* Turn on Cookie Exchange (on relevant for servers) */
#define SSL_OP_COOKIE_EXCHANGE              0x00002000L
/* Don't use RFC4507 ticket extension */
#define SSL_OP_NO_TICKET	            0x00004000L
/* Use Cisco's "speshul" version of DTLS_BAD_VER (as client)  */
#define SSL_OP_CISCO_ANYCONNECT		    0x00008000L

/* As server, disallow session resumption on renegotiation */
#define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION	0x00010000L
/* Don't use compression even if supported */
#define SSL_OP_NO_COMPRESSION				0x00020000L
/* Permit unsafe legacy renegotiation */
#define SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION	0x00040000L
/* If set, always create a new key when using tmp_ecdh parameters */
#define SSL_OP_SINGLE_ECDH_USE				0x00080000L
/* If set, always create a new key when using tmp_dh parameters */
#define SSL_OP_SINGLE_DH_USE				0x00100000L
/* Set to always use the tmp_rsa key when doing RSA operations,
 * even when this violates protocol specs */
#define SSL_OP_EPHEMERAL_RSA				0x00200000L
/* Set on servers to choose the cipher according to the server's
 * preferences */
#define SSL_OP_CIPHER_SERVER_PREFERENCE			0x00400000L
/* If set, a server will allow a client to issue a SSLv3.0 version number
 * as latest version supported in the premaster secret, even when TLSv1.0
 * (version 3.1) was announced in the client hello. Normally this is
 * forbidden to prevent version rollback attacks. */
#define SSL_OP_TLS_ROLLBACK_BUG				0x00800000L

#define SSL_OP_NO_SSLv2					0x01000000L
#define SSL_OP_NO_SSLv3					0x02000000L
#define SSL_OP_NO_TLSv1					0x04000000L
#define SSL_OP_NO_TLSv1_2				0x08000000L
#define SSL_OP_NO_TLSv1_1				0x10000000L

/* These next two were never actually used for anything since SSLeay
 * zap so we have some more flags.
 */
/* The next flag deliberately changes the ciphertest, this is a check
 * for the PKCS#1 attack */
#define SSL_OP_PKCS1_CHECK_1				0x0
#define SSL_OP_PKCS1_CHECK_2				0x0

#define SSL_OP_NETSCAPE_CA_DN_BUG			0x20000000L
#define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG		0x40000000L
/* Make server add server-hello extension from early version of
 * cryptopro draft, when GOST ciphersuite is negotiated. 
 * Required for interoperability with CryptoPro CSP 3.x 
 */
#define SSL_OP_CRYPTOPRO_TLSEXT_BUG			0x80000000L

/* Allow SSL_write(..., n) to return r with 0 < r < n (i.e. report success
 * when just a single record has been written): */
#define SSL_MODE_ENABLE_PARTIAL_WRITE       0x00000001L
/* Make it possible to retry SSL_write() with changed buffer location
 * (buffer contents must stay the same!); this is not the default to avoid
 * the misconception that non-blocking SSL_write() behaves like
 * non-blocking write(): */
#define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L
/* Never bother the application with retries if the transport
 * is blocking: */
#define SSL_MODE_AUTO_RETRY 0x00000004L
/* Don't attempt to automatically build certificate chain */
#define SSL_MODE_NO_AUTO_CHAIN 0x00000008L
/* Save RAM by releasing read and write buffers when they're empty. (SSL3 and
 * TLS only.)  "Released" buffers are put onto a free-list in the context
 * or just freed (depending on the context's setting for freelist_max_len). */
#define SSL_MODE_RELEASE_BUFFERS 0x00000010L
/* When set, clients may send application data before receipt of CCS
 * and Finished.  This mode enables full-handshakes to 'complete' in
 * one RTT. */
#define SSL_MODE_HANDSHAKE_CUTTHROUGH 0x00000020L

/* Note: SSL[_CTX]_set_{options,mode} use |= op on the previous value,
 * they cannot be used to clear bits. */

#define SSL_CTX_set_options(ctx,op) \
	SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,(op),NULL)
#define SSL_CTX_clear_options(ctx,op) \
	SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_OPTIONS,(op),NULL)
#define SSL_CTX_get_options(ctx) \
	SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,0,NULL)
#define SSL_set_options(ssl,op) \
	SSL_ctrl((ssl),SSL_CTRL_OPTIONS,(op),NULL)
#define SSL_clear_options(ssl,op) \
	SSL_ctrl((ssl),SSL_CTRL_CLEAR_OPTIONS,(op),NULL)
#define SSL_get_options(ssl) \
        SSL_ctrl((ssl),SSL_CTRL_OPTIONS,0,NULL)

#define SSL_CTX_set_mode(ctx,op) \
	SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,(op),NULL)
#define SSL_CTX_clear_mode(ctx,op) \
	SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_MODE,(op),NULL)
#define SSL_CTX_get_mode(ctx) \
	SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,0,NULL)
#define SSL_clear_mode(ssl,op) \
	SSL_ctrl((ssl),SSL_CTRL_CLEAR_MODE,(op),NULL)
#define SSL_set_mode(ssl,op) \
	SSL_ctrl((ssl),SSL_CTRL_MODE,(op),NULL)
#define SSL_get_mode(ssl) \
        SSL_ctrl((ssl),SSL_CTRL_MODE,0,NULL)
#define SSL_set_mtu(ssl, mtu) \
        SSL_ctrl((ssl),SSL_CTRL_SET_MTU,(mtu),NULL)

#define SSL_get_secure_renegotiation_support(ssl) \
	SSL_ctrl((ssl), SSL_CTRL_GET_RI_SUPPORT, 0, NULL)

#ifndef OPENSSL_NO_HEARTBEATS
#define SSL_heartbeat(ssl) \
        SSL_ctrl((ssl),SSL_CTRL_TLS_EXT_SEND_HEARTBEAT,0,NULL)
#endif

void SSL_CTX_set_msg_callback(SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg));
void SSL_set_msg_callback(SSL *ssl, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg));
#define SSL_CTX_set_msg_callback_arg(ctx, arg) SSL_CTX_ctrl((ctx), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg))
#define SSL_set_msg_callback_arg(ssl, arg) SSL_ctrl((ssl), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg))

#ifndef OPENSSL_NO_SRP

#ifndef OPENSSL_NO_SSL_INTERN

typedef struct srp_ctx_st
	{
	/* param for all the callbacks */
	void *SRP_cb_arg;
	/* set client Hello login callback */
	int (*TLS_ext_srp_username_callback)(SSL *, int *, void *);
	/* set SRP N/g param callback for verification */
	int (*SRP_verify_param_callback)(SSL *, void *);
	/* set SRP client passwd callback */
	char *(*SRP_give_srp_client_pwd_callback)(SSL *, void *);

	char *login;
	BIGNUM *N,*g,*s,*B,*A;
	BIGNUM *a,*b,*v;
	char *info;
	int strength;

	unsigned long srp_Mask;
	} SRP_CTX;

#endif

/* see tls_srp.c */
int SSL_SRP_CTX_init(SSL *s);
int SSL_CTX_SRP_CTX_init(SSL_CTX *ctx);
int SSL_SRP_CTX_free(SSL *ctx);
int SSL_CTX_SRP_CTX_free(SSL_CTX *ctx);
int SSL_srp_server_param_with_username(SSL *s, int *ad);
int SRP_generate_server_master_secret(SSL *s,unsigned char *master_key);
int SRP_Calc_A_param(SSL *s);
int SRP_generate_client_master_secret(SSL *s,unsigned char *master_key);

#endif

#if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN32)
#define SSL_MAX_CERT_LIST_DEFAULT 1024*30 /* 30k max cert list :-) */
#else
#define SSL_MAX_CERT_LIST_DEFAULT 1024*100 /* 100k max cert list :-) */
#endif

#define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT	(1024*20)

/* This callback type is used inside SSL_CTX, SSL, and in the functions that set
 * them. It is used to override the generation of SSL/TLS session IDs in a
 * server. Return value should be zero on an error, non-zero to proceed. Also,
 * callbacks should themselves check if the id they generate is unique otherwise
 * the SSL handshake will fail with an error - callbacks can do this using the
 * 'ssl' value they're passed by;
 *      SSL_has_matching_session_id(ssl, id, *id_len)
 * The length value passed in is set at the maximum size the session ID can be.
 * In SSLv2 this is 16 bytes, whereas SSLv3/TLSv1 it is 32 bytes. The callback
 * can alter this length to be less if desired, but under SSLv2 session IDs are
 * supposed to be fixed at 16 bytes so the id will be padded after the callback
 * returns in this case. It is also an error for the callback to set the size to
 * zero. */
typedef int (*GEN_SESSION_CB)(const SSL *ssl, unsigned char *id,
				unsigned int *id_len);

typedef struct ssl_comp_st SSL_COMP;

#ifndef OPENSSL_NO_SSL_INTERN

struct ssl_comp_st
	{
	int id;
	const char *name;
#ifndef OPENSSL_NO_COMP
	COMP_METHOD *method;
#else
	char *method;
#endif
	};

DECLARE_STACK_OF(SSL_COMP)
DECLARE_LHASH_OF(SSL_SESSION);

struct ssl_ctx_st
	{
	const SSL_METHOD *method;

	STACK_OF(SSL_CIPHER) *cipher_list;
	/* same as above but sorted for lookup */
	STACK_OF(SSL_CIPHER) *cipher_list_by_id;

	struct x509_store_st /* X509_STORE */ *cert_store;
	LHASH_OF(SSL_SESSION) *sessions;
	/* Most session-ids that will be cached, default is
	 * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */
	unsigned long session_cache_size;
	struct ssl_session_st *session_cache_head;
	struct ssl_session_st *session_cache_tail;

	/* This can have one of 2 values, ored together,
	 * SSL_SESS_CACHE_CLIENT,
	 * SSL_SESS_CACHE_SERVER,
	 * Default is SSL_SESSION_CACHE_SERVER, which means only
	 * SSL_accept which cache SSL_SESSIONS. */
	int session_cache_mode;

	/* If timeout is not 0, it is the default timeout value set
	 * when SSL_new() is called.  This has been put in to make
	 * life easier to set things up */
	long session_timeout;

	/* If this callback is not null, it will be called each
	 * time a session id is added to the cache.  If this function
	 * returns 1, it means that the callback will do a
	 * SSL_SESSION_free() when it has finished using it.  Otherwise,
	 * on 0, it means the callback has finished with it.
	 * If remove_session_cb is not null, it will be called when
	 * a session-id is removed from the cache.  After the call,
	 * OpenSSL will SSL_SESSION_free() it. */
	int (*new_session_cb)(struct ssl_st *ssl,SSL_SESSION *sess);
	void (*remove_session_cb)(struct ssl_ctx_st *ctx,SSL_SESSION *sess);
	SSL_SESSION *(*get_session_cb)(struct ssl_st *ssl,
		unsigned char *data,int len,int *copy);

	struct
		{
		int sess_connect;	/* SSL new conn - started */
		int sess_connect_renegotiate;/* SSL reneg - requested */
		int sess_connect_good;	/* SSL new conne/reneg - finished */
		int sess_accept;	/* SSL new accept - started */
		int sess_accept_renegotiate;/* SSL reneg - requested */
		int sess_accept_good;	/* SSL accept/reneg - finished */
		int sess_miss;		/* session lookup misses  */
		int sess_timeout;	/* reuse attempt on timeouted session */
		int sess_cache_full;	/* session removed due to full cache */
		int sess_hit;		/* session reuse actually done */
		int sess_cb_hit;	/* session-id that was not
					 * in the cache was
					 * passed back via the callback.  This
					 * indicates that the application is
					 * supplying session-id's from other
					 * processes - spooky :-) */
		} stats;

	int references;

	/* if defined, these override the X509_verify_cert() calls */
	int (*app_verify_callback)(X509_STORE_CTX *, void *);
	void *app_verify_arg;
	/* before OpenSSL 0.9.7, 'app_verify_arg' was ignored
	 * ('app_verify_callback' was called with just one argument) */

	/* Default password callback. */
	pem_password_cb *default_passwd_callback;

	/* Default password callback user data. */
	void *default_passwd_callback_userdata;

	/* get client cert callback */
	int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey);

    /* cookie generate callback */
    int (*app_gen_cookie_cb)(SSL *ssl, unsigned char *cookie, 
        unsigned int *cookie_len);

    /* verify cookie callback */
    int (*app_verify_cookie_cb)(SSL *ssl, unsigned char *cookie, 
        unsigned int cookie_len);

	CRYPTO_EX_DATA ex_data;

	const EVP_MD *rsa_md5;/* For SSLv2 - name is 'ssl2-md5' */
	const EVP_MD *md5;	/* For SSLv3/TLSv1 'ssl3-md5' */
	const EVP_MD *sha1;   /* For SSLv3/TLSv1 'ssl3->sha1' */

	STACK_OF(X509) *extra_certs;
	STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */


	/* Default values used when no per-SSL value is defined follow */

	void (*info_callback)(const SSL *ssl,int type,int val); /* used if SSL's info_callback is NULL */

	/* what we put in client cert requests */
	STACK_OF(X509_NAME) *client_CA;


	/* Default values to use in SSL structures follow (these are copied by SSL_new) */

	unsigned long options;
	unsigned long mode;
	long max_cert_list;

	struct cert_st /* CERT */ *cert;
	int read_ahead;

	/* callback that allows applications to peek at protocol messages */
	void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg);
	void *msg_callback_arg;

	int verify_mode;
	unsigned int sid_ctx_length;
	unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH];
	int (*default_verify_callback)(int ok,X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */

	/* Default generate session ID callback. */
	GEN_SESSION_CB generate_session_id;

	X509_VERIFY_PARAM *param;

#if 0
	int purpose;		/* Purpose setting */
	int trust;		/* Trust setting */
#endif

	int quiet_shutdown;

	/* Maximum amount of data to send in one fragment.
	 * actual record size can be more than this due to
	 * padding and MAC overheads.
	 */
	unsigned int max_send_fragment;

#ifndef OPENSSL_ENGINE
	/* Engine to pass requests for client certs to
	 */
	ENGINE *client_cert_engine;
#endif

#ifndef OPENSSL_NO_TLSEXT
	/* TLS extensions servername callback */
	int (*tlsext_servername_callback)(SSL*, int *, void *);
	void *tlsext_servername_arg;
	/* RFC 4507 session ticket keys */
	unsigned char tlsext_tick_key_name[16];
	unsigned char tlsext_tick_hmac_key[16];
	unsigned char tlsext_tick_aes_key[16];
	/* Callback to support customisation of ticket key setting */
	int (*tlsext_ticket_key_cb)(SSL *ssl,
					unsigned char *name, unsigned char *iv,
					EVP_CIPHER_CTX *ectx,
 					HMAC_CTX *hctx, int enc);

	/* certificate status request info */
	/* Callback for status request */
	int (*tlsext_status_cb)(SSL *ssl, void *arg);
	void *tlsext_status_arg;

	/* draft-rescorla-tls-opaque-prf-input-00.txt information */
	int (*tlsext_opaque_prf_input_callback)(SSL *, void *peerinput, size_t len, void *arg);
	void *tlsext_opaque_prf_input_callback_arg;
#endif

#ifndef OPENSSL_NO_PSK
	char *psk_identity_hint;
	unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity,
		unsigned int max_identity_len, unsigned char *psk,
		unsigned int max_psk_len);
	unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
		unsigned char *psk, unsigned int max_psk_len);
#endif

#ifndef OPENSSL_NO_BUF_FREELISTS
#define SSL_MAX_BUF_FREELIST_LEN_DEFAULT 32
	unsigned int freelist_max_len;
	struct ssl3_buf_freelist_st *wbuf_freelist;
	struct ssl3_buf_freelist_st *rbuf_freelist;
#endif
#ifndef OPENSSL_NO_SRP
	SRP_CTX srp_ctx; /* ctx for SRP authentication */
#endif

#ifndef OPENSSL_NO_TLSEXT

# ifndef OPENSSL_NO_NEXTPROTONEG
	/* Next protocol negotiation information */
	/* (for experimental NPN extension). */

	/* For a server, this contains a callback function by which the set of
	 * advertised protocols can be provided. */
	int (*next_protos_advertised_cb)(SSL *s, const unsigned char **buf,
			                 unsigned int *len, void *arg);
	void *next_protos_advertised_cb_arg;
	/* For a client, this contains a callback function that selects the
	 * next protocol from the list provided by the server. */
	int (*next_proto_select_cb)(SSL *s, unsigned char **out,
				    unsigned char *outlen,
				    const unsigned char *in,
				    unsigned int inlen,
				    void *arg);
	void *next_proto_select_cb_arg;
# endif

	/* ALPN information
	 * (we are in the process of transitioning from NPN to ALPN.) */

	/* For a server, this contains a callback function that allows the
	 * server to select the protocol for the connection.
	 *   out: on successful return, this must point to the raw protocol
	 *        name (without the length prefix).
	 *   outlen: on successful return, this contains the length of |*out|.
	 *   in: points to the client's list of supported protocols in
	 *       wire-format.
	 *   inlen: the length of |in|. */
	int (*alpn_select_cb)(SSL *s,
			      const unsigned char **out,
			      unsigned char *outlen,
			      const unsigned char* in,
			      unsigned int inlen,
			      void *arg);
	void *alpn_select_cb_arg;

	/* For a client, this contains the list of supported protocols in wire
	 * format. */
	unsigned char* alpn_client_proto_list;
	unsigned alpn_client_proto_list_len;

        /* SRTP profiles we are willing to do from RFC 5764 */
        STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles;  

	/* If true, a client will advertise the Channel ID extension and a
	 * server will echo it. */
	char tlsext_channel_id_enabled;
	/* The client's Channel ID private key. */
	EVP_PKEY *tlsext_channel_id_private;
#endif
	};

#endif

#define SSL_SESS_CACHE_OFF			0x0000
#define SSL_SESS_CACHE_CLIENT			0x0001
#define SSL_SESS_CACHE_SERVER			0x0002
#define SSL_SESS_CACHE_BOTH	(SSL_SESS_CACHE_CLIENT|SSL_SESS_CACHE_SERVER)
#define SSL_SESS_CACHE_NO_AUTO_CLEAR		0x0080
/* enough comments already ... see SSL_CTX_set_session_cache_mode(3) */
#define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP	0x0100
#define SSL_SESS_CACHE_NO_INTERNAL_STORE	0x0200
#define SSL_SESS_CACHE_NO_INTERNAL \
	(SSL_SESS_CACHE_NO_INTERNAL_LOOKUP|SSL_SESS_CACHE_NO_INTERNAL_STORE)

LHASH_OF(SSL_SESSION) *SSL_CTX_sessions(SSL_CTX *ctx);
#define SSL_CTX_sess_number(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_NUMBER,0,NULL)
#define SSL_CTX_sess_connect(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT,0,NULL)
#define SSL_CTX_sess_connect_good(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_GOOD,0,NULL)
#define SSL_CTX_sess_connect_renegotiate(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_RENEGOTIATE,0,NULL)
#define SSL_CTX_sess_accept(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT,0,NULL)
#define SSL_CTX_sess_accept_renegotiate(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_RENEGOTIATE,0,NULL)
#define SSL_CTX_sess_accept_good(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_GOOD,0,NULL)
#define SSL_CTX_sess_hits(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_HIT,0,NULL)
#define SSL_CTX_sess_cb_hits(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CB_HIT,0,NULL)
#define SSL_CTX_sess_misses(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_MISSES,0,NULL)
#define SSL_CTX_sess_timeouts(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_TIMEOUTS,0,NULL)
#define SSL_CTX_sess_cache_full(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CACHE_FULL,0,NULL)
/* SSL_CTX_enable_tls_channel_id configures a TLS server to accept TLS client
 * IDs from clients. Returns 1 on success. */
#define SSL_CTX_enable_tls_channel_id(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_CHANNEL_ID,0,NULL)

void SSL_CTX_sess_set_new_cb(SSL_CTX *ctx, int (*new_session_cb)(struct ssl_st *ssl,SSL_SESSION *sess));
int (*SSL_CTX_sess_get_new_cb(SSL_CTX *ctx))(struct ssl_st *ssl, SSL_SESSION *sess);
void SSL_CTX_sess_set_remove_cb(SSL_CTX *ctx, void (*remove_session_cb)(struct ssl_ctx_st *ctx,SSL_SESSION *sess));
void (*SSL_CTX_sess_get_remove_cb(SSL_CTX *ctx))(struct ssl_ctx_st *ctx, SSL_SESSION *sess);
void SSL_CTX_sess_set_get_cb(SSL_CTX *ctx, SSL_SESSION *(*get_session_cb)(struct ssl_st *ssl, unsigned char *data,int len,int *copy));
SSL_SESSION *(*SSL_CTX_sess_get_get_cb(SSL_CTX *ctx))(struct ssl_st *ssl, unsigned char *Data, int len, int *copy);
void SSL_CTX_set_info_callback(SSL_CTX *ctx, void (*cb)(const SSL *ssl,int type,int val));
void (*SSL_CTX_get_info_callback(SSL_CTX *ctx))(const SSL *ssl,int type,int val);
void SSL_CTX_set_client_cert_cb(SSL_CTX *ctx, int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey));
int (*SSL_CTX_get_client_cert_cb(SSL_CTX *ctx))(SSL *ssl, X509 **x509, EVP_PKEY **pkey);
#ifndef OPENSSL_NO_ENGINE
int SSL_CTX_set_client_cert_engine(SSL_CTX *ctx, ENGINE *e);
#endif
void SSL_CTX_set_cookie_generate_cb(SSL_CTX *ctx, int (*app_gen_cookie_cb)(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len));
void SSL_CTX_set_cookie_verify_cb(SSL_CTX *ctx, int (*app_verify_cookie_cb)(SSL *ssl, unsigned char *cookie, unsigned int cookie_len));
#ifndef OPENSSL_NO_NEXTPROTONEG
void SSL_CTX_set_next_protos_advertised_cb(SSL_CTX *s,
					   int (*cb) (SSL *ssl,
						      const unsigned char **out,
						      unsigned int *outlen,
						      void *arg),
					   void *arg);
void SSL_CTX_set_next_proto_select_cb(SSL_CTX *s,
				      int (*cb) (SSL *ssl,
						 unsigned char **out,
						 unsigned char *outlen,
						 const unsigned char *in,
						 unsigned int inlen,
						 void *arg),
				      void *arg);

int SSL_select_next_proto(unsigned char **out, unsigned char *outlen,
			  const unsigned char *in, unsigned int inlen,
			  const unsigned char *client, unsigned int client_len);
void SSL_get0_next_proto_negotiated(const SSL *s,
				    const unsigned char **data, unsigned *len);

#define OPENSSL_NPN_UNSUPPORTED	0
#define OPENSSL_NPN_NEGOTIATED	1
#define OPENSSL_NPN_NO_OVERLAP	2
#endif

int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const unsigned char* protos,
			    unsigned protos_len);
int SSL_set_alpn_protos(SSL *ssl, const unsigned char* protos,
			unsigned protos_len);
void SSL_CTX_set_alpn_select_cb(SSL_CTX* ctx,
				int (*cb) (SSL *ssl,
					   const unsigned char **out,
					   unsigned char *outlen,
					   const unsigned char *in,
					   unsigned int inlen,
					   void *arg),
				void *arg);
void SSL_get0_alpn_selected(const SSL *ssl, const unsigned char **data,
			    unsigned *len);

#ifndef OPENSSL_NO_PSK
/* the maximum length of the buffer given to callbacks containing the
 * resulting identity/psk */
#define PSK_MAX_IDENTITY_LEN 128
#define PSK_MAX_PSK_LEN 256
void SSL_CTX_set_psk_client_callback(SSL_CTX *ctx, 
	unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, 
		char *identity, unsigned int max_identity_len, unsigned char *psk,
		unsigned int max_psk_len));
void SSL_set_psk_client_callback(SSL *ssl, 
	unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, 
		char *identity, unsigned int max_identity_len, unsigned char *psk,
		unsigned int max_psk_len));
void SSL_CTX_set_psk_server_callback(SSL_CTX *ctx, 
	unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
		unsigned char *psk, unsigned int max_psk_len));
void SSL_set_psk_server_callback(SSL *ssl,
	unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
		unsigned char *psk, unsigned int max_psk_len));
int SSL_CTX_use_psk_identity_hint(SSL_CTX *ctx, const char *identity_hint);
int SSL_use_psk_identity_hint(SSL *s, const char *identity_hint);
const char *SSL_get_psk_identity_hint(const SSL *s);
const char *SSL_get_psk_identity(const SSL *s);
#endif

#define SSL_NOTHING	1
#define SSL_WRITING	2
#define SSL_READING	3
#define SSL_X509_LOOKUP	4

/* These will only be used when doing non-blocking IO */
#define SSL_want_nothing(s)	(SSL_want(s) == SSL_NOTHING)
#define SSL_want_read(s)	(SSL_want(s) == SSL_READING)
#define SSL_want_write(s)	(SSL_want(s) == SSL_WRITING)
#define SSL_want_x509_lookup(s)	(SSL_want(s) == SSL_X509_LOOKUP)

#define SSL_MAC_FLAG_READ_MAC_STREAM 1
#define SSL_MAC_FLAG_WRITE_MAC_STREAM 2

#ifndef OPENSSL_NO_SSL_INTERN

struct ssl_st
	{
	/* protocol version
	 * (one of SSL2_VERSION, SSL3_VERSION, TLS1_VERSION, DTLS1_VERSION)
	 */
	int version;
	int type; /* SSL_ST_CONNECT or SSL_ST_ACCEPT */

	const SSL_METHOD *method; /* SSLv3 */

	/* There are 2 BIO's even though they are normally both the
	 * same.  This is so data can be read and written to different
	 * handlers */

#ifndef OPENSSL_NO_BIO
	BIO *rbio; /* used by SSL_read */
	BIO *wbio; /* used by SSL_write */
	BIO *bbio; /* used during session-id reuse to concatenate
		    * messages */
#else
	char *rbio; /* used by SSL_read */
	char *wbio; /* used by SSL_write */
	char *bbio;
#endif
	/* This holds a variable that indicates what we were doing
	 * when a 0 or -1 is returned.  This is needed for
	 * non-blocking IO so we know what request needs re-doing when
	 * in SSL_accept or SSL_connect */
	int rwstate;

	/* true when we are actually in SSL_accept() or SSL_connect() */
	int in_handshake;
	int (*handshake_func)(SSL *);

	/* Imagine that here's a boolean member "init" that is
	 * switched as soon as SSL_set_{accept/connect}_state
	 * is called for the first time, so that "state" and
	 * "handshake_func" are properly initialized.  But as
	 * handshake_func is == 0 until then, we use this
	 * test instead of an "init" member.
	 */

	int server;	/* are we the server side? - mostly used by SSL_clear*/

	int new_session;/* Generate a new session or reuse an old one.
	                 * NB: For servers, the 'new' session may actually be a previously
	                 * cached session or even the previous session unless
	                 * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set */
	int quiet_shutdown;/* don't send shutdown packets */
	int shutdown;	/* we have shut things down, 0x01 sent, 0x02
			 * for received */
	int state;	/* where we are */
	int rstate;	/* where we are when reading */

	BUF_MEM *init_buf;	/* buffer used during init */
	void *init_msg;   	/* pointer to handshake message body, set by ssl3_get_message() */
	int init_num;		/* amount read/written */
	int init_off;		/* amount read/written */

	/* used internally to point at a raw packet */
	unsigned char *packet;
	unsigned int packet_length;

	struct ssl2_state_st *s2; /* SSLv2 variables */
	struct ssl3_state_st *s3; /* SSLv3 variables */
	struct dtls1_state_st *d1; /* DTLSv1 variables */

	int read_ahead;		/* Read as many input bytes as possible
	               	 	 * (for non-blocking reads) */

	/* callback that allows applications to peek at protocol messages */
	void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg);
	void *msg_callback_arg;

	int hit;		/* reusing a previous session */

	X509_VERIFY_PARAM *param;

#if 0
	int purpose;		/* Purpose setting */
	int trust;		/* Trust setting */
#endif

	/* crypto */
	STACK_OF(SSL_CIPHER) *cipher_list;
	STACK_OF(SSL_CIPHER) *cipher_list_by_id;

	/* These are the ones being used, the ones in SSL_SESSION are
	 * the ones to be 'copied' into these ones */
	int mac_flags; 
	EVP_CIPHER_CTX *enc_read_ctx;		/* cryptographic state */
	EVP_MD_CTX *read_hash;		/* used for mac generation */
#ifndef OPENSSL_NO_COMP
	COMP_CTX *expand;			/* uncompress */
#else
	char *expand;
#endif

	EVP_CIPHER_CTX *enc_write_ctx;		/* cryptographic state */
	EVP_MD_CTX *write_hash;		/* used for mac generation */
#ifndef OPENSSL_NO_COMP
	COMP_CTX *compress;			/* compression */
#else
	char *compress;	
#endif

	/* session info */

	/* client cert? */
	/* This is used to hold the server certificate used */
	struct cert_st /* CERT */ *cert;

	/* the session_id_context is used to ensure sessions are only reused
	 * in the appropriate context */
	unsigned int sid_ctx_length;
	unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH];

	/* This can also be in the session once a session is established */
	SSL_SESSION *session;

        /* This can be disabled to prevent the use of uncached sessions */
	int session_creation_enabled;

	/* Default generate session ID callback. */
	GEN_SESSION_CB generate_session_id;

	/* Used in SSL2 and SSL3 */
	int verify_mode;	/* 0 don't care about verify failure.
				 * 1 fail if verify fails */
	int (*verify_callback)(int ok,X509_STORE_CTX *ctx); /* fail if callback returns 0 */

	void (*info_callback)(const SSL *ssl,int type,int val); /* optional informational callback */

	int error;		/* error bytes to be written */
	int error_code;		/* actual code */

#ifndef OPENSSL_NO_KRB5
	KSSL_CTX *kssl_ctx;     /* Kerberos 5 context */
#endif	/* OPENSSL_NO_KRB5 */

#ifndef OPENSSL_NO_PSK
	unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity,
		unsigned int max_identity_len, unsigned char *psk,
		unsigned int max_psk_len);
	unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
		unsigned char *psk, unsigned int max_psk_len);
#endif

	SSL_CTX *ctx;
	/* set this flag to 1 and a sleep(1) is put into all SSL_read()
	 * and SSL_write() calls, good for nbio debuging :-) */
	int debug;	

	/* extra application data */
	long verify_result;
	CRYPTO_EX_DATA ex_data;

	/* for server side, keep the list of CA_dn we can use */
	STACK_OF(X509_NAME) *client_CA;

	int references;
	unsigned long options; /* protocol behaviour */
	unsigned long mode; /* API behaviour */
	long max_cert_list;
	int first_packet;
	int client_version;	/* what was passed, used for
				 * SSLv3/TLS rollback check */
	unsigned int max_send_fragment;
#ifndef OPENSSL_NO_TLSEXT
	/* TLS extension debug callback */
	void (*tlsext_debug_cb)(SSL *s, int client_server, int type,
					unsigned char *data, int len,
					void *arg);
	void *tlsext_debug_arg;
	char *tlsext_hostname;
	int servername_done;   /* no further mod of servername 
	                          0 : call the servername extension callback.
	                          1 : prepare 2, allow last ack just after in server callback.
	                          2 : don't call servername callback, no ack in server hello
	                       */
	/* certificate status request info */
	/* Status type or -1 if no status type */
	int tlsext_status_type;
	/* Expect OCSP CertificateStatus message */
	int tlsext_status_expected;
	/* OCSP status request only */
	STACK_OF(OCSP_RESPID) *tlsext_ocsp_ids;
	X509_EXTENSIONS *tlsext_ocsp_exts;
	/* OCSP response received or to be sent */
	unsigned char *tlsext_ocsp_resp;
	int tlsext_ocsp_resplen;

	/* RFC4507 session ticket expected to be received or sent */
	int tlsext_ticket_expected;
#ifndef OPENSSL_NO_EC
	size_t tlsext_ecpointformatlist_length;
	unsigned char *tlsext_ecpointformatlist; /* our list */
	size_t tlsext_ellipticcurvelist_length;
	unsigned char *tlsext_ellipticcurvelist; /* our list */
#endif /* OPENSSL_NO_EC */

	/* draft-rescorla-tls-opaque-prf-input-00.txt information to be used for handshakes */
	void *tlsext_opaque_prf_input;
	size_t tlsext_opaque_prf_input_len;

	/* TLS Session Ticket extension override */
	TLS_SESSION_TICKET_EXT *tlsext_session_ticket;

	/* TLS Session Ticket extension callback */
	tls_session_ticket_ext_cb_fn tls_session_ticket_ext_cb;
	void *tls_session_ticket_ext_cb_arg;

	/* TLS pre-shared secret session resumption */
	tls_session_secret_cb_fn tls_session_secret_cb;
	void *tls_session_secret_cb_arg;

	SSL_CTX * initial_ctx; /* initial ctx, used to store sessions */

#ifndef OPENSSL_NO_NEXTPROTONEG
	/* Next protocol negotiation. For the client, this is the protocol that
	 * we sent in NextProtocol and is set when handling ServerHello
	 * extensions.
	 *
	 * For a server, this is the client's selected_protocol from
	 * NextProtocol and is set when handling the NextProtocol message,
	 * before the Finished message. */
	unsigned char *next_proto_negotiated;
	unsigned char next_proto_negotiated_len;
#endif

#define session_ctx initial_ctx

	STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles;  /* What we'll do */
	SRTP_PROTECTION_PROFILE *srtp_profile;            /* What's been chosen */

	unsigned int tlsext_heartbeat;  /* Is use of the Heartbeat extension negotiated?
	                                   0: disabled
	                                   1: enabled
	                                   2: enabled, but not allowed to send Requests
	                                 */
	unsigned int tlsext_hb_pending; /* Indicates if a HeartbeatRequest is in flight */
	unsigned int tlsext_hb_seq;     /* HeartbeatRequest sequence number */

	/* Copied from the SSL_CTX. For a server, means that we'll accept
	 * Channel IDs from clients. For a client, means that we'll advertise
	 * support. */
	char tlsext_channel_id_enabled;
	/* The client's Channel ID private key. */
	EVP_PKEY *tlsext_channel_id_private;

	/* For a client, this contains the list of supported protocols in wire
	 * format. */
	unsigned char* alpn_client_proto_list;
	unsigned alpn_client_proto_list_len;
#else
#define session_ctx ctx
#endif /* OPENSSL_NO_TLSEXT */

	int renegotiate;/* 1 if we are renegotiating.
	                 * 2 if we are a server and are inside a handshake
	                 * (i.e. not just sending a HelloRequest) */

#ifndef OPENSSL_NO_SRP
	SRP_CTX srp_ctx; /* ctx for SRP authentication */
#endif
	};

#endif

#ifdef __cplusplus
}
#endif

#include <openssl/ssl2.h>
#include <openssl/ssl3.h>
#include <openssl/tls1.h> /* This is mostly sslv3 with a few tweaks */
#include <openssl/dtls1.h> /* Datagram TLS */
#include <openssl/ssl23.h>
#include <openssl/srtp.h>  /* Support for the use_srtp extension */

#ifdef  __cplusplus
extern "C" {
#endif

/* compatibility */
#define SSL_set_app_data(s,arg)		(SSL_set_ex_data(s,0,(char *)arg))
#define SSL_get_app_data(s)		(SSL_get_ex_data(s,0))
#define SSL_SESSION_set_app_data(s,a)	(SSL_SESSION_set_ex_data(s,0,(char *)a))
#define SSL_SESSION_get_app_data(s)	(SSL_SESSION_get_ex_data(s,0))
#define SSL_CTX_get_app_data(ctx)	(SSL_CTX_get_ex_data(ctx,0))
#define SSL_CTX_set_app_data(ctx,arg)	(SSL_CTX_set_ex_data(ctx,0,(char *)arg))

/* The following are the possible values for ssl->state are are
 * used to indicate where we are up to in the SSL connection establishment.
 * The macros that follow are about the only things you should need to use
 * and even then, only when using non-blocking IO.
 * It can also be useful to work out where you were when the connection
 * failed */

#define SSL_ST_CONNECT			0x1000
#define SSL_ST_ACCEPT			0x2000
#define SSL_ST_MASK			0x0FFF
#define SSL_ST_INIT			(SSL_ST_CONNECT|SSL_ST_ACCEPT)
#define SSL_ST_BEFORE			0x4000
#define SSL_ST_OK			0x03
#define SSL_ST_RENEGOTIATE		(0x04|SSL_ST_INIT)

#define SSL_CB_LOOP			0x01
#define SSL_CB_EXIT			0x02
#define SSL_CB_READ			0x04
#define SSL_CB_WRITE			0x08
#define SSL_CB_ALERT			0x4000 /* used in callback */
#define SSL_CB_READ_ALERT		(SSL_CB_ALERT|SSL_CB_READ)
#define SSL_CB_WRITE_ALERT		(SSL_CB_ALERT|SSL_CB_WRITE)
#define SSL_CB_ACCEPT_LOOP		(SSL_ST_ACCEPT|SSL_CB_LOOP)
#define SSL_CB_ACCEPT_EXIT		(SSL_ST_ACCEPT|SSL_CB_EXIT)
#define SSL_CB_CONNECT_LOOP		(SSL_ST_CONNECT|SSL_CB_LOOP)
#define SSL_CB_CONNECT_EXIT		(SSL_ST_CONNECT|SSL_CB_EXIT)
#define SSL_CB_HANDSHAKE_START		0x10
#define SSL_CB_HANDSHAKE_DONE		0x20

/* Is the SSL_connection established? */
#define SSL_get_state(a)		SSL_state(a)
#define SSL_is_init_finished(a)		(SSL_state(a) == SSL_ST_OK)
#define SSL_in_init(a)			((SSL_state(a)&SSL_ST_INIT) && \
					!SSL_cutthrough_complete(a))
#define SSL_in_before(a)		(SSL_state(a)&SSL_ST_BEFORE)
#define SSL_in_connect_init(a)		(SSL_state(a)&SSL_ST_CONNECT)
#define SSL_in_accept_init(a)		(SSL_state(a)&SSL_ST_ACCEPT)
int SSL_cutthrough_complete(const SSL *s);

/* The following 2 states are kept in ssl->rstate when reads fail,
 * you should not need these */
#define SSL_ST_READ_HEADER			0xF0
#define SSL_ST_READ_BODY			0xF1
#define SSL_ST_READ_DONE			0xF2

/* Obtain latest Finished message
 *   -- that we sent (SSL_get_finished)
 *   -- that we expected from peer (SSL_get_peer_finished).
 * Returns length (0 == no Finished so far), copies up to 'count' bytes. */
size_t SSL_get_finished(const SSL *s, void *buf, size_t count);
size_t SSL_get_peer_finished(const SSL *s, void *buf, size_t count);

/* use either SSL_VERIFY_NONE or SSL_VERIFY_PEER, the last 2 options
 * are 'ored' with SSL_VERIFY_PEER if they are desired */
#define SSL_VERIFY_NONE			0x00
#define SSL_VERIFY_PEER			0x01
#define SSL_VERIFY_FAIL_IF_NO_PEER_CERT	0x02
#define SSL_VERIFY_CLIENT_ONCE		0x04

#define OpenSSL_add_ssl_algorithms()	SSL_library_init()
#define SSLeay_add_ssl_algorithms()	SSL_library_init()

/* this is for backward compatibility */
#if 0 /* NEW_SSLEAY */
#define SSL_CTX_set_default_verify(a,b,c) SSL_CTX_set_verify(a,b,c)
#define SSL_set_pref_cipher(c,n)	SSL_set_cipher_list(c,n)
#define SSL_add_session(a,b)            SSL_CTX_add_session((a),(b))
#define SSL_remove_session(a,b)		SSL_CTX_remove_session((a),(b))
#define SSL_flush_sessions(a,b)		SSL_CTX_flush_sessions((a),(b))
#endif
/* More backward compatibility */
#define SSL_get_cipher(s) \
		SSL_CIPHER_get_name(SSL_get_current_cipher(s))
#define SSL_get_cipher_bits(s,np) \
		SSL_CIPHER_get_bits(SSL_get_current_cipher(s),np)
#define SSL_get_cipher_version(s) \
		SSL_CIPHER_get_version(SSL_get_current_cipher(s))
#define SSL_get_cipher_name(s) \
		SSL_CIPHER_get_name(SSL_get_current_cipher(s))
#define SSL_get_time(a)		SSL_SESSION_get_time(a)
#define SSL_set_time(a,b)	SSL_SESSION_set_time((a),(b))
#define SSL_get_timeout(a)	SSL_SESSION_get_timeout(a)
#define SSL_set_timeout(a,b)	SSL_SESSION_set_timeout((a),(b))

#define d2i_SSL_SESSION_bio(bp,s_id) ASN1_d2i_bio_of(SSL_SESSION,SSL_SESSION_new,d2i_SSL_SESSION,bp,s_id)
#define i2d_SSL_SESSION_bio(bp,s_id) ASN1_i2d_bio_of(SSL_SESSION,i2d_SSL_SESSION,bp,s_id)

DECLARE_PEM_rw(SSL_SESSION, SSL_SESSION)

#define SSL_AD_REASON_OFFSET		1000 /* offset to get SSL_R_... value from SSL_AD_... */

/* These alert types are for SSLv3 and TLSv1 */
#define SSL_AD_CLOSE_NOTIFY		SSL3_AD_CLOSE_NOTIFY
#define SSL_AD_UNEXPECTED_MESSAGE	SSL3_AD_UNEXPECTED_MESSAGE /* fatal */
#define SSL_AD_BAD_RECORD_MAC		SSL3_AD_BAD_RECORD_MAC     /* fatal */
#define SSL_AD_DECRYPTION_FAILED	TLS1_AD_DECRYPTION_FAILED
#define SSL_AD_RECORD_OVERFLOW		TLS1_AD_RECORD_OVERFLOW
#define SSL_AD_DECOMPRESSION_FAILURE	SSL3_AD_DECOMPRESSION_FAILURE/* fatal */
#define SSL_AD_HANDSHAKE_FAILURE	SSL3_AD_HANDSHAKE_FAILURE/* fatal */
#define SSL_AD_NO_CERTIFICATE		SSL3_AD_NO_CERTIFICATE /* Not for TLS */
#define SSL_AD_BAD_CERTIFICATE		SSL3_AD_BAD_CERTIFICATE
#define SSL_AD_UNSUPPORTED_CERTIFICATE	SSL3_AD_UNSUPPORTED_CERTIFICATE
#define SSL_AD_CERTIFICATE_REVOKED	SSL3_AD_CERTIFICATE_REVOKED
#define SSL_AD_CERTIFICATE_EXPIRED	SSL3_AD_CERTIFICATE_EXPIRED
#define SSL_AD_CERTIFICATE_UNKNOWN	SSL3_AD_CERTIFICATE_UNKNOWN
#define SSL_AD_ILLEGAL_PARAMETER	SSL3_AD_ILLEGAL_PARAMETER   /* fatal */
#define SSL_AD_UNKNOWN_CA		TLS1_AD_UNKNOWN_CA	/* fatal */
#define SSL_AD_ACCESS_DENIED		TLS1_AD_ACCESS_DENIED	/* fatal */
#define SSL_AD_DECODE_ERROR		TLS1_AD_DECODE_ERROR	/* fatal */
#define SSL_AD_DECRYPT_ERROR		TLS1_AD_DECRYPT_ERROR
#define SSL_AD_EXPORT_RESTRICTION	TLS1_AD_EXPORT_RESTRICTION/* fatal */
#define SSL_AD_PROTOCOL_VERSION		TLS1_AD_PROTOCOL_VERSION /* fatal */
#define SSL_AD_INSUFFICIENT_SECURITY	TLS1_AD_INSUFFICIENT_SECURITY/* fatal */
#define SSL_AD_INTERNAL_ERROR		TLS1_AD_INTERNAL_ERROR	/* fatal */
#define SSL_AD_USER_CANCELLED		TLS1_AD_USER_CANCELLED
#define SSL_AD_NO_RENEGOTIATION		TLS1_AD_NO_RENEGOTIATION
#define SSL_AD_UNSUPPORTED_EXTENSION	TLS1_AD_UNSUPPORTED_EXTENSION
#define SSL_AD_CERTIFICATE_UNOBTAINABLE TLS1_AD_CERTIFICATE_UNOBTAINABLE
#define SSL_AD_UNRECOGNIZED_NAME	TLS1_AD_UNRECOGNIZED_NAME
#define SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE TLS1_AD_BAD_CERTIFICATE_STATUS_RESPONSE
#define SSL_AD_BAD_CERTIFICATE_HASH_VALUE TLS1_AD_BAD_CERTIFICATE_HASH_VALUE
#define SSL_AD_UNKNOWN_PSK_IDENTITY     TLS1_AD_UNKNOWN_PSK_IDENTITY /* fatal */

#define SSL_ERROR_NONE			0
#define SSL_ERROR_SSL			1
#define SSL_ERROR_WANT_READ		2
#define SSL_ERROR_WANT_WRITE		3
#define SSL_ERROR_WANT_X509_LOOKUP	4
#define SSL_ERROR_SYSCALL		5 /* look at error stack/return value/errno */
#define SSL_ERROR_ZERO_RETURN		6
#define SSL_ERROR_WANT_CONNECT		7
#define SSL_ERROR_WANT_ACCEPT		8

#define SSL_CTRL_NEED_TMP_RSA			1
#define SSL_CTRL_SET_TMP_RSA			2
#define SSL_CTRL_SET_TMP_DH			3
#define SSL_CTRL_SET_TMP_ECDH			4
#define SSL_CTRL_SET_TMP_RSA_CB			5
#define SSL_CTRL_SET_TMP_DH_CB			6
#define SSL_CTRL_SET_TMP_ECDH_CB		7

#define SSL_CTRL_GET_SESSION_REUSED		8
#define SSL_CTRL_GET_CLIENT_CERT_REQUEST	9
#define SSL_CTRL_GET_NUM_RENEGOTIATIONS		10
#define SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS	11
#define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS	12
#define SSL_CTRL_GET_FLAGS			13
#define SSL_CTRL_EXTRA_CHAIN_CERT		14

#define SSL_CTRL_SET_MSG_CALLBACK               15
#define SSL_CTRL_SET_MSG_CALLBACK_ARG           16

/* only applies to datagram connections */
#define SSL_CTRL_SET_MTU                17
/* Stats */
#define SSL_CTRL_SESS_NUMBER			20
#define SSL_CTRL_SESS_CONNECT			21
#define SSL_CTRL_SESS_CONNECT_GOOD		22
#define SSL_CTRL_SESS_CONNECT_RENEGOTIATE	23
#define SSL_CTRL_SESS_ACCEPT			24
#define SSL_CTRL_SESS_ACCEPT_GOOD		25
#define SSL_CTRL_SESS_ACCEPT_RENEGOTIATE	26
#define SSL_CTRL_SESS_HIT			27
#define SSL_CTRL_SESS_CB_HIT			28
#define SSL_CTRL_SESS_MISSES			29
#define SSL_CTRL_SESS_TIMEOUTS			30
#define SSL_CTRL_SESS_CACHE_FULL		31
#define SSL_CTRL_OPTIONS			32
#define SSL_CTRL_MODE				33

#define SSL_CTRL_GET_READ_AHEAD			40
#define SSL_CTRL_SET_READ_AHEAD			41
#define SSL_CTRL_SET_SESS_CACHE_SIZE		42
#define SSL_CTRL_GET_SESS_CACHE_SIZE		43
#define SSL_CTRL_SET_SESS_CACHE_MODE		44
#define SSL_CTRL_GET_SESS_CACHE_MODE		45

#define SSL_CTRL_GET_MAX_CERT_LIST		50
#define SSL_CTRL_SET_MAX_CERT_LIST		51

#define SSL_CTRL_SET_MAX_SEND_FRAGMENT		52

/* see tls1.h for macros based on these */
#ifndef OPENSSL_NO_TLSEXT
#define SSL_CTRL_SET_TLSEXT_SERVERNAME_CB	53
#define SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG	54
#define SSL_CTRL_SET_TLSEXT_HOSTNAME		55
#define SSL_CTRL_SET_TLSEXT_DEBUG_CB		56
#define SSL_CTRL_SET_TLSEXT_DEBUG_ARG		57
#define SSL_CTRL_GET_TLSEXT_TICKET_KEYS		58
#define SSL_CTRL_SET_TLSEXT_TICKET_KEYS		59
#define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT	60
#define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB	61
#define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB_ARG 62
#define SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB	63
#define SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB_ARG	64
#define SSL_CTRL_SET_TLSEXT_STATUS_REQ_TYPE	65
#define SSL_CTRL_GET_TLSEXT_STATUS_REQ_EXTS	66
#define SSL_CTRL_SET_TLSEXT_STATUS_REQ_EXTS	67
#define SSL_CTRL_GET_TLSEXT_STATUS_REQ_IDS	68
#define SSL_CTRL_SET_TLSEXT_STATUS_REQ_IDS	69
#define SSL_CTRL_GET_TLSEXT_STATUS_REQ_OCSP_RESP	70
#define SSL_CTRL_SET_TLSEXT_STATUS_REQ_OCSP_RESP	71

#define SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB	72

#define SSL_CTRL_SET_TLS_EXT_SRP_USERNAME_CB	75
#define SSL_CTRL_SET_SRP_VERIFY_PARAM_CB		76
#define SSL_CTRL_SET_SRP_GIVE_CLIENT_PWD_CB		77

#define SSL_CTRL_SET_SRP_ARG		78
#define SSL_CTRL_SET_TLS_EXT_SRP_USERNAME		79
#define SSL_CTRL_SET_TLS_EXT_SRP_STRENGTH		80
#define SSL_CTRL_SET_TLS_EXT_SRP_PASSWORD		81
#ifndef OPENSSL_NO_HEARTBEATS
#define SSL_CTRL_TLS_EXT_SEND_HEARTBEAT				85
#define SSL_CTRL_GET_TLS_EXT_HEARTBEAT_PENDING		86
#define SSL_CTRL_SET_TLS_EXT_HEARTBEAT_NO_REQUESTS	87
#endif
#define SSL_CTRL_CHANNEL_ID			88
#define SSL_CTRL_GET_CHANNEL_ID			89
#define SSL_CTRL_SET_CHANNEL_ID			90
#endif

#define DTLS_CTRL_GET_TIMEOUT		73
#define DTLS_CTRL_HANDLE_TIMEOUT	74
#define DTLS_CTRL_LISTEN			75

#define SSL_CTRL_GET_RI_SUPPORT			76
#define SSL_CTRL_CLEAR_OPTIONS			77
#define SSL_CTRL_CLEAR_MODE			78

#define SSL_CTRL_GET_EXTRA_CHAIN_CERTS		82
#define SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS	83

#define DTLSv1_get_timeout(ssl, arg) \
	SSL_ctrl(ssl,DTLS_CTRL_GET_TIMEOUT,0, (void *)arg)
#define DTLSv1_handle_timeout(ssl) \
	SSL_ctrl(ssl,DTLS_CTRL_HANDLE_TIMEOUT,0, NULL)
#define DTLSv1_listen(ssl, peer) \
	SSL_ctrl(ssl,DTLS_CTRL_LISTEN,0, (void *)peer)

#define SSL_session_reused(ssl) \
	SSL_ctrl((ssl),SSL_CTRL_GET_SESSION_REUSED,0,NULL)
#define SSL_num_renegotiations(ssl) \
	SSL_ctrl((ssl),SSL_CTRL_GET_NUM_RENEGOTIATIONS,0,NULL)
#define SSL_clear_num_renegotiations(ssl) \
	SSL_ctrl((ssl),SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS,0,NULL)
#define SSL_total_renegotiations(ssl) \
	SSL_ctrl((ssl),SSL_CTRL_GET_TOTAL_RENEGOTIATIONS,0,NULL)

#define SSL_CTX_need_tmp_RSA(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_NEED_TMP_RSA,0,NULL)
#define SSL_CTX_set_tmp_rsa(ctx,rsa) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa)
#define SSL_CTX_set_tmp_dh(ctx,dh) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_DH,0,(char *)dh)
#define SSL_CTX_set_tmp_ecdh(ctx,ecdh) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh)

#define SSL_need_tmp_RSA(ssl) \
	SSL_ctrl(ssl,SSL_CTRL_NEED_TMP_RSA,0,NULL)
#define SSL_set_tmp_rsa(ssl,rsa) \
	SSL_ctrl(ssl,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa)
#define SSL_set_tmp_dh(ssl,dh) \
	SSL_ctrl(ssl,SSL_CTRL_SET_TMP_DH,0,(char *)dh)
#define SSL_set_tmp_ecdh(ssl,ecdh) \
	SSL_ctrl(ssl,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh)

/* SSL_enable_tls_channel_id configures a TLS server to accept TLS client
 * IDs from clients. Returns 1 on success. */
#define SSL_enable_tls_channel_id(ctx) \
	SSL_ctrl(ctx,SSL_CTRL_CHANNEL_ID,0,NULL)
/* SSL_set1_tls_channel_id configures a TLS client to send a TLS Channel ID to
 * compatible servers. private_key must be a P-256 EVP_PKEY*. Returns 1 on
 * success. */
#define SSL_set1_tls_channel_id(s, private_key) \
	SSL_ctrl(s,SSL_CTRL_SET_CHANNEL_ID,0,(void*)private_key)
#define SSL_CTX_set1_tls_channel_id(ctx, private_key) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SET_CHANNEL_ID,0,(void*)private_key)
/* SSL_get_tls_channel_id gets the client's TLS Channel ID from a server SSL*
 * and copies up to the first |channel_id_len| bytes into |channel_id|. The
 * Channel ID consists of the client's P-256 public key as an (x,y) pair where
 * each is a 32-byte, big-endian field element. Returns 0 if the client didn't
 * offer a Channel ID and the length of the complete Channel ID otherwise. */
#define SSL_get_tls_channel_id(ctx, channel_id, channel_id_len) \
	SSL_ctrl(ctx,SSL_CTRL_GET_CHANNEL_ID,channel_id_len,(void*)channel_id)

#define SSL_CTX_add_extra_chain_cert(ctx,x509) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_EXTRA_CHAIN_CERT,0,(char *)x509)
#define SSL_CTX_get_extra_chain_certs(ctx,px509) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_GET_EXTRA_CHAIN_CERTS,0,px509)
#define SSL_CTX_clear_extra_chain_certs(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS,0,NULL)

#ifndef OPENSSL_NO_BIO
BIO_METHOD *BIO_f_ssl(void);
BIO *BIO_new_ssl(SSL_CTX *ctx,int client);
BIO *BIO_new_ssl_connect(SSL_CTX *ctx);
BIO *BIO_new_buffer_ssl_connect(SSL_CTX *ctx);
int BIO_ssl_copy_session_id(BIO *to,BIO *from);
void BIO_ssl_shutdown(BIO *ssl_bio);

#endif

int	SSL_CTX_set_cipher_list(SSL_CTX *,const char *str);
SSL_CTX *SSL_CTX_new(const SSL_METHOD *meth);
void	SSL_CTX_free(SSL_CTX *);
long SSL_CTX_set_timeout(SSL_CTX *ctx,long t);
long SSL_CTX_get_timeout(const SSL_CTX *ctx);
X509_STORE *SSL_CTX_get_cert_store(const SSL_CTX *);
void SSL_CTX_set_cert_store(SSL_CTX *,X509_STORE *);
int SSL_want(const SSL *s);
int	SSL_clear(SSL *s);

void	SSL_CTX_flush_sessions(SSL_CTX *ctx,long tm);

const SSL_CIPHER *SSL_get_current_cipher(const SSL *s);
int	SSL_CIPHER_get_bits(const SSL_CIPHER *c,int *alg_bits);
char *	SSL_CIPHER_get_version(const SSL_CIPHER *c);
const char *	SSL_CIPHER_get_name(const SSL_CIPHER *c);
unsigned long 	SSL_CIPHER_get_id(const SSL_CIPHER *c);
const char* SSL_CIPHER_authentication_method(const SSL_CIPHER* cipher);

int	SSL_get_fd(const SSL *s);
int	SSL_get_rfd(const SSL *s);
int	SSL_get_wfd(const SSL *s);
const char  * SSL_get_cipher_list(const SSL *s,int n);
char *	SSL_get_shared_ciphers(const SSL *s, char *buf, int len);
int	SSL_get_read_ahead(const SSL * s);
int	SSL_pending(const SSL *s);
const char *	SSL_authentication_method(const SSL *c);
#ifndef OPENSSL_NO_SOCK
int	SSL_set_fd(SSL *s, int fd);
int	SSL_set_rfd(SSL *s, int fd);
int	SSL_set_wfd(SSL *s, int fd);
#endif
#ifndef OPENSSL_NO_BIO
void	SSL_set_bio(SSL *s, BIO *rbio,BIO *wbio);
BIO *	SSL_get_rbio(const SSL *s);
BIO *	SSL_get_wbio(const SSL *s);
#endif
int	SSL_set_cipher_list(SSL *s, const char *str);
int	SSL_set_cipher_lists(SSL *s, STACK_OF(SSL_CIPHER) *sk);
void	SSL_set_read_ahead(SSL *s, int yes);
int	SSL_get_verify_mode(const SSL *s);
int	SSL_get_verify_depth(const SSL *s);
int	(*SSL_get_verify_callback(const SSL *s))(int,X509_STORE_CTX *);
void	SSL_set_verify(SSL *s, int mode,
		       int (*callback)(int ok,X509_STORE_CTX *ctx));
void	SSL_set_verify_depth(SSL *s, int depth);
#ifndef OPENSSL_NO_RSA
int	SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa);
#endif
int	SSL_use_RSAPrivateKey_ASN1(SSL *ssl, unsigned char *d, long len);
int	SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey);
int	SSL_use_PrivateKey_ASN1(int pk,SSL *ssl, const unsigned char *d, long len);
int	SSL_use_certificate(SSL *ssl, X509 *x);
int	SSL_use_certificate_ASN1(SSL *ssl, const unsigned char *d, int len);
int	SSL_use_certificate_chain(SSL *ssl, STACK_OF(X509) *cert_chain);
STACK_OF(X509) * SSL_get_certificate_chain(SSL *ssl, X509 *x);

#ifndef OPENSSL_NO_STDIO
int	SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type);
int	SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type);
int	SSL_use_certificate_file(SSL *ssl, const char *file, int type);
int	SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx, const char *file, int type);
int	SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file, int type);
int	SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file, int type);
int	SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file); /* PEM type */
STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file);
int	SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs,
					    const char *file);
#ifndef OPENSSL_SYS_VMS
#ifndef OPENSSL_SYS_MACINTOSH_CLASSIC /* XXXXX: Better scheme needed! [was: #ifndef MAC_OS_pre_X] */
int	SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs,
					   const char *dir);
#endif
#endif

#endif

void	SSL_load_error_strings(void );
const char *SSL_state_string(const SSL *s);
const char *SSL_rstate_string(const SSL *s);
const char *SSL_state_string_long(const SSL *s);
const char *SSL_rstate_string_long(const SSL *s);
long	SSL_SESSION_get_time(const SSL_SESSION *s);
long	SSL_SESSION_set_time(SSL_SESSION *s, long t);
long	SSL_SESSION_get_timeout(const SSL_SESSION *s);
long	SSL_SESSION_set_timeout(SSL_SESSION *s, long t);
void	SSL_copy_session_id(SSL *to,const SSL *from);
X509 *SSL_SESSION_get0_peer(SSL_SESSION *s);
int SSL_SESSION_set1_id_context(SSL_SESSION *s,const unsigned char *sid_ctx,
			       unsigned int sid_ctx_len);

SSL_SESSION *SSL_SESSION_new(void);
const unsigned char *SSL_SESSION_get_id(const SSL_SESSION *s,
					unsigned int *len);
const char *	SSL_SESSION_get_version(const SSL_SESSION *s);
unsigned int SSL_SESSION_get_compress_id(const SSL_SESSION *s);
#ifndef OPENSSL_NO_FP_API
int	SSL_SESSION_print_fp(FILE *fp,const SSL_SESSION *ses);
#endif
#ifndef OPENSSL_NO_BIO
int	SSL_SESSION_print(BIO *fp,const SSL_SESSION *ses);
#endif
void	SSL_SESSION_free(SSL_SESSION *ses);
int	i2d_SSL_SESSION(SSL_SESSION *in,unsigned char **pp);
int	SSL_set_session(SSL *to, SSL_SESSION *session);
void	SSL_set_session_creation_enabled(SSL *, int);
int	SSL_CTX_add_session(SSL_CTX *s, SSL_SESSION *c);
int	SSL_CTX_remove_session(SSL_CTX *,SSL_SESSION *c);
int	SSL_CTX_set_generate_session_id(SSL_CTX *, GEN_SESSION_CB);
int	SSL_set_generate_session_id(SSL *, GEN_SESSION_CB);
int	SSL_has_matching_session_id(const SSL *ssl, const unsigned char *id,
					unsigned int id_len);
SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a,const unsigned char **pp,
			     long length);

#ifdef HEADER_X509_H
X509 *	SSL_get_peer_certificate(const SSL *s);
#endif

STACK_OF(X509) *SSL_get_peer_cert_chain(const SSL *s);

int SSL_CTX_get_verify_mode(const SSL_CTX *ctx);
int SSL_CTX_get_verify_depth(const SSL_CTX *ctx);
int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx))(int,X509_STORE_CTX *);
void SSL_CTX_set_verify(SSL_CTX *ctx,int mode,
			int (*callback)(int, X509_STORE_CTX *));
void SSL_CTX_set_verify_depth(SSL_CTX *ctx,int depth);
void SSL_CTX_set_cert_verify_callback(SSL_CTX *ctx, int (*cb)(X509_STORE_CTX *,void *), void *arg);
#ifndef OPENSSL_NO_RSA
int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa);
#endif
int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, const unsigned char *d, long len);
int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey);
int SSL_CTX_use_PrivateKey_ASN1(int pk,SSL_CTX *ctx,
	const unsigned char *d, long len);
int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x);
int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, int len, const unsigned char *d);

void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx, pem_password_cb *cb);
void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx, void *u);

int SSL_CTX_check_private_key(const SSL_CTX *ctx);
int SSL_check_private_key(const SSL *ctx);

int	SSL_CTX_set_session_id_context(SSL_CTX *ctx,const unsigned char *sid_ctx,
				       unsigned int sid_ctx_len);

SSL *	SSL_new(SSL_CTX *ctx);
int	SSL_set_session_id_context(SSL *ssl,const unsigned char *sid_ctx,
				   unsigned int sid_ctx_len);

int SSL_CTX_set_purpose(SSL_CTX *s, int purpose);
int SSL_set_purpose(SSL *s, int purpose);
int SSL_CTX_set_trust(SSL_CTX *s, int trust);
int SSL_set_trust(SSL *s, int trust);

int SSL_CTX_set1_param(SSL_CTX *ctx, X509_VERIFY_PARAM *vpm);
int SSL_set1_param(SSL *ssl, X509_VERIFY_PARAM *vpm);

#ifndef OPENSSL_NO_SRP
int SSL_CTX_set_srp_username(SSL_CTX *ctx,char *name);
int SSL_CTX_set_srp_password(SSL_CTX *ctx,char *password);
int SSL_CTX_set_srp_strength(SSL_CTX *ctx, int strength);
int SSL_CTX_set_srp_client_pwd_callback(SSL_CTX *ctx,
					char *(*cb)(SSL *,void *));
int SSL_CTX_set_srp_verify_param_callback(SSL_CTX *ctx,
					  int (*cb)(SSL *,void *));
int SSL_CTX_set_srp_username_callback(SSL_CTX *ctx,
				      int (*cb)(SSL *,int *,void *));
int SSL_CTX_set_srp_cb_arg(SSL_CTX *ctx, void *arg);

int SSL_set_srp_server_param(SSL *s, const BIGNUM *N, const BIGNUM *g,
			     BIGNUM *sa, BIGNUM *v, char *info);
int SSL_set_srp_server_param_pw(SSL *s, const char *user, const char *pass,
				const char *grp);

BIGNUM *SSL_get_srp_g(SSL *s);
BIGNUM *SSL_get_srp_N(SSL *s);

char *SSL_get_srp_username(SSL *s);
char *SSL_get_srp_userinfo(SSL *s);
#endif

void	SSL_free(SSL *ssl);
int 	SSL_accept(SSL *ssl);
int 	SSL_connect(SSL *ssl);
int 	SSL_read(SSL *ssl,void *buf,int num);
int 	SSL_peek(SSL *ssl,void *buf,int num);
int 	SSL_write(SSL *ssl,const void *buf,int num);
long	SSL_ctrl(SSL *ssl,int cmd, long larg, void *parg);
long	SSL_callback_ctrl(SSL *, int, void (*)(void));
long	SSL_CTX_ctrl(SSL_CTX *ctx,int cmd, long larg, void *parg);
long	SSL_CTX_callback_ctrl(SSL_CTX *, int, void (*)(void));

int	SSL_get_error(const SSL *s,int ret_code);
const char *SSL_get_version(const SSL *s);

/* This sets the 'default' SSL version that SSL_new() will create */
int SSL_CTX_set_ssl_version(SSL_CTX *ctx, const SSL_METHOD *meth);

#ifndef OPENSSL_NO_SSL2
const SSL_METHOD *SSLv2_method(void);		/* SSLv2 */
const SSL_METHOD *SSLv2_server_method(void);	/* SSLv2 */
const SSL_METHOD *SSLv2_client_method(void);	/* SSLv2 */
#endif

const SSL_METHOD *SSLv3_method(void);		/* SSLv3 */
const SSL_METHOD *SSLv3_server_method(void);	/* SSLv3 */
const SSL_METHOD *SSLv3_client_method(void);	/* SSLv3 */

const SSL_METHOD *SSLv23_method(void);	/* SSLv3 but can rollback to v2 */
const SSL_METHOD *SSLv23_server_method(void);	/* SSLv3 but can rollback to v2 */
const SSL_METHOD *SSLv23_client_method(void);	/* SSLv3 but can rollback to v2 */

const SSL_METHOD *TLSv1_method(void);		/* TLSv1.0 */
const SSL_METHOD *TLSv1_server_method(void);	/* TLSv1.0 */
const SSL_METHOD *TLSv1_client_method(void);	/* TLSv1.0 */

const SSL_METHOD *TLSv1_1_method(void);		/* TLSv1.1 */
const SSL_METHOD *TLSv1_1_server_method(void);	/* TLSv1.1 */
const SSL_METHOD *TLSv1_1_client_method(void);	/* TLSv1.1 */

const SSL_METHOD *TLSv1_2_method(void);		/* TLSv1.2 */
const SSL_METHOD *TLSv1_2_server_method(void);	/* TLSv1.2 */
const SSL_METHOD *TLSv1_2_client_method(void);	/* TLSv1.2 */


const SSL_METHOD *DTLSv1_method(void);		/* DTLSv1.0 */
const SSL_METHOD *DTLSv1_server_method(void);	/* DTLSv1.0 */
const SSL_METHOD *DTLSv1_client_method(void);	/* DTLSv1.0 */

STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *s);

int SSL_do_handshake(SSL *s);
int SSL_renegotiate(SSL *s);
int SSL_renegotiate_abbreviated(SSL *s);
int SSL_renegotiate_pending(SSL *s);
int SSL_shutdown(SSL *s);

const SSL_METHOD *SSL_get_ssl_method(SSL *s);
int SSL_set_ssl_method(SSL *s, const SSL_METHOD *method);
const char *SSL_alert_type_string_long(int value);
const char *SSL_alert_type_string(int value);
const char *SSL_alert_desc_string_long(int value);
const char *SSL_alert_desc_string(int value);

void SSL_set_client_CA_list(SSL *s, STACK_OF(X509_NAME) *name_list);
void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list);
STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *s);
STACK_OF(X509_NAME) *SSL_CTX_get_client_CA_list(const SSL_CTX *s);
int SSL_add_client_CA(SSL *ssl,X509 *x);
int SSL_CTX_add_client_CA(SSL_CTX *ctx,X509 *x);

void SSL_set_connect_state(SSL *s);
void SSL_set_accept_state(SSL *s);

long SSL_get_default_timeout(const SSL *s);

int SSL_library_init(void );

char *SSL_CIPHER_description(const SSL_CIPHER *,char *buf,int size);
STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *sk);

SSL *SSL_dup(SSL *ssl);

X509 *SSL_get_certificate(const SSL *ssl);
/* EVP_PKEY */ struct evp_pkey_st *SSL_get_privatekey(SSL *ssl);

void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx,int mode);
int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx);
void SSL_set_quiet_shutdown(SSL *ssl,int mode);
int SSL_get_quiet_shutdown(const SSL *ssl);
void SSL_set_shutdown(SSL *ssl,int mode);
int SSL_get_shutdown(const SSL *ssl);
int SSL_version(const SSL *ssl);
int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx);
int SSL_CTX_load_verify_locations(SSL_CTX *ctx, const char *CAfile,
	const char *CApath);
#define SSL_get0_session SSL_get_session /* just peek at pointer */
SSL_SESSION *SSL_get_session(const SSL *ssl);
SSL_SESSION *SSL_get1_session(SSL *ssl); /* obtain a reference count */
SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl);
SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX* ctx);
void SSL_set_info_callback(SSL *ssl,
			   void (*cb)(const SSL *ssl,int type,int val));
void (*SSL_get_info_callback(const SSL *ssl))(const SSL *ssl,int type,int val);
int SSL_state(const SSL *ssl);
void SSL_set_state(SSL *ssl, int state);

void SSL_set_verify_result(SSL *ssl,long v);
long SSL_get_verify_result(const SSL *ssl);

int SSL_set_ex_data(SSL *ssl,int idx,void *data);
void *SSL_get_ex_data(const SSL *ssl,int idx);
int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
	CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);

int SSL_SESSION_set_ex_data(SSL_SESSION *ss,int idx,void *data);
void *SSL_SESSION_get_ex_data(const SSL_SESSION *ss,int idx);
int SSL_SESSION_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
	CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);

int SSL_CTX_set_ex_data(SSL_CTX *ssl,int idx,void *data);
void *SSL_CTX_get_ex_data(const SSL_CTX *ssl,int idx);
int SSL_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
	CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);

int SSL_get_ex_data_X509_STORE_CTX_idx(void );

#define SSL_CTX_sess_set_cache_size(ctx,t) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_SIZE,t,NULL)
#define SSL_CTX_sess_get_cache_size(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_SIZE,0,NULL)
#define SSL_CTX_set_session_cache_mode(ctx,m) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_MODE,m,NULL)
#define SSL_CTX_get_session_cache_mode(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_MODE,0,NULL)

#define SSL_CTX_get_default_read_ahead(ctx) SSL_CTX_get_read_ahead(ctx)
#define SSL_CTX_set_default_read_ahead(ctx,m) SSL_CTX_set_read_ahead(ctx,m)
#define SSL_CTX_get_read_ahead(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_GET_READ_AHEAD,0,NULL)
#define SSL_CTX_set_read_ahead(ctx,m) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SET_READ_AHEAD,m,NULL)
#define SSL_CTX_get_max_cert_list(ctx) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL)
#define SSL_CTX_set_max_cert_list(ctx,m) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL)
#define SSL_get_max_cert_list(ssl) \
	SSL_ctrl(ssl,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL)
#define SSL_set_max_cert_list(ssl,m) \
	SSL_ctrl(ssl,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL)

#define SSL_CTX_set_max_send_fragment(ctx,m) \
	SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_SEND_FRAGMENT,m,NULL)
#define SSL_set_max_send_fragment(ssl,m) \
	SSL_ctrl(ssl,SSL_CTRL_SET_MAX_SEND_FRAGMENT,m,NULL)

     /* NB: the keylength is only applicable when is_export is true */
#ifndef OPENSSL_NO_RSA
void SSL_CTX_set_tmp_rsa_callback(SSL_CTX *ctx,
				  RSA *(*cb)(SSL *ssl,int is_export,
					     int keylength));

void SSL_set_tmp_rsa_callback(SSL *ssl,
				  RSA *(*cb)(SSL *ssl,int is_export,
					     int keylength));
#endif
#ifndef OPENSSL_NO_DH
void SSL_CTX_set_tmp_dh_callback(SSL_CTX *ctx,
				 DH *(*dh)(SSL *ssl,int is_export,
					   int keylength));
void SSL_set_tmp_dh_callback(SSL *ssl,
				 DH *(*dh)(SSL *ssl,int is_export,
					   int keylength));
#endif
#ifndef OPENSSL_NO_ECDH
void SSL_CTX_set_tmp_ecdh_callback(SSL_CTX *ctx,
				 EC_KEY *(*ecdh)(SSL *ssl,int is_export,
					   int keylength));
void SSL_set_tmp_ecdh_callback(SSL *ssl,
				 EC_KEY *(*ecdh)(SSL *ssl,int is_export,
					   int keylength));
#endif

#ifndef OPENSSL_NO_COMP
const COMP_METHOD *SSL_get_current_compression(SSL *s);
const COMP_METHOD *SSL_get_current_expansion(SSL *s);
const char *SSL_COMP_get_name(const COMP_METHOD *comp);
STACK_OF(SSL_COMP) *SSL_COMP_get_compression_methods(void);
int SSL_COMP_add_compression_method(int id,COMP_METHOD *cm);
#else
const void *SSL_get_current_compression(SSL *s);
const void *SSL_get_current_expansion(SSL *s);
const char *SSL_COMP_get_name(const void *comp);
void *SSL_COMP_get_compression_methods(void);
int SSL_COMP_add_compression_method(int id,void *cm);
#endif

/* TLS extensions functions */
int SSL_set_session_ticket_ext(SSL *s, void *ext_data, int ext_len);

int SSL_set_session_ticket_ext_cb(SSL *s, tls_session_ticket_ext_cb_fn cb,
				  void *arg);

/* Pre-shared secret session resumption functions */
int SSL_set_session_secret_cb(SSL *s, tls_session_secret_cb_fn tls_session_secret_cb, void *arg);

void SSL_set_debug(SSL *s, int debug);
int SSL_cache_hit(SSL *s);

/* BEGIN ERROR CODES */
/* The following lines are auto generated by the script mkerr.pl. Any changes
 * made after this point may be overwritten when the script is next run.
 */
void ERR_load_SSL_strings(void);

/* Error codes for the SSL functions. */

/* Function codes. */
#define SSL_F_CLIENT_CERTIFICATE			 100
#define SSL_F_CLIENT_FINISHED				 167
#define SSL_F_CLIENT_HELLO				 101
#define SSL_F_CLIENT_MASTER_KEY				 102
#define SSL_F_D2I_SSL_SESSION				 103
#define SSL_F_DO_DTLS1_WRITE				 245
#define SSL_F_DO_SSL3_WRITE				 104
#define SSL_F_DTLS1_ACCEPT				 246
#define SSL_F_DTLS1_ADD_CERT_TO_BUF			 295
#define SSL_F_DTLS1_BUFFER_RECORD			 247
#define SSL_F_DTLS1_CHECK_TIMEOUT_NUM			 316
#define SSL_F_DTLS1_CLIENT_HELLO			 248
#define SSL_F_DTLS1_CONNECT				 249
#define SSL_F_DTLS1_ENC					 250
#define SSL_F_DTLS1_GET_HELLO_VERIFY			 251
#define SSL_F_DTLS1_GET_MESSAGE				 252
#define SSL_F_DTLS1_GET_MESSAGE_FRAGMENT		 253
#define SSL_F_DTLS1_GET_RECORD				 254
#define SSL_F_DTLS1_HANDLE_TIMEOUT			 297
#define SSL_F_DTLS1_HEARTBEAT				 305
#define SSL_F_DTLS1_OUTPUT_CERT_CHAIN			 255
#define SSL_F_DTLS1_PREPROCESS_FRAGMENT			 288
#define SSL_F_DTLS1_PROCESS_OUT_OF_SEQ_MESSAGE		 256
#define SSL_F_DTLS1_PROCESS_RECORD			 257
#define SSL_F_DTLS1_READ_BYTES				 258
#define SSL_F_DTLS1_READ_FAILED				 259
#define SSL_F_DTLS1_SEND_CERTIFICATE_REQUEST		 260
#define SSL_F_DTLS1_SEND_CLIENT_CERTIFICATE		 261
#define SSL_F_DTLS1_SEND_CLIENT_KEY_EXCHANGE		 262
#define SSL_F_DTLS1_SEND_CLIENT_VERIFY			 263
#define SSL_F_DTLS1_SEND_HELLO_VERIFY_REQUEST		 264
#define SSL_F_DTLS1_SEND_SERVER_CERTIFICATE		 265
#define SSL_F_DTLS1_SEND_SERVER_HELLO			 266
#define SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE		 267
#define SSL_F_DTLS1_WRITE_APP_DATA_BYTES		 268
#define SSL_F_GET_CLIENT_FINISHED			 105
#define SSL_F_GET_CLIENT_HELLO				 106
#define SSL_F_GET_CLIENT_MASTER_KEY			 107
#define SSL_F_GET_SERVER_FINISHED			 108
#define SSL_F_GET_SERVER_HELLO				 109
#define SSL_F_GET_SERVER_VERIFY				 110
#define SSL_F_I2D_SSL_SESSION				 111
#define SSL_F_READ_N					 112
#define SSL_F_REQUEST_CERTIFICATE			 113
#define SSL_F_SERVER_FINISH				 239
#define SSL_F_SERVER_HELLO				 114
#define SSL_F_SERVER_VERIFY				 240
#define SSL_F_SSL23_ACCEPT				 115
#define SSL_F_SSL23_CLIENT_HELLO			 116
#define SSL_F_SSL23_CONNECT				 117
#define SSL_F_SSL23_GET_CLIENT_HELLO			 118
#define SSL_F_SSL23_GET_SERVER_HELLO			 119
#define SSL_F_SSL23_PEEK				 237
#define SSL_F_SSL23_READ				 120
#define SSL_F_SSL23_WRITE				 121
#define SSL_F_SSL2_ACCEPT				 122
#define SSL_F_SSL2_CONNECT				 123
#define SSL_F_SSL2_ENC_INIT				 124
#define SSL_F_SSL2_GENERATE_KEY_MATERIAL		 241
#define SSL_F_SSL2_PEEK					 234
#define SSL_F_SSL2_READ					 125
#define SSL_F_SSL2_READ_INTERNAL			 236
#define SSL_F_SSL2_SET_CERTIFICATE			 126
#define SSL_F_SSL2_WRITE				 127
#define SSL_F_SSL3_ACCEPT				 128
#define SSL_F_SSL3_ADD_CERT_TO_BUF			 296
#define SSL_F_SSL3_CALLBACK_CTRL			 233
#define SSL_F_SSL3_CHANGE_CIPHER_STATE			 129
#define SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM		 130
#define SSL_F_SSL3_CHECK_CLIENT_HELLO			 304
#define SSL_F_SSL3_CLIENT_HELLO				 131
#define SSL_F_SSL3_CONNECT				 132
#define SSL_F_SSL3_CTRL					 213
#define SSL_F_SSL3_CTX_CTRL				 133
#define SSL_F_SSL3_DIGEST_CACHED_RECORDS		 293
#define SSL_F_SSL3_DO_CHANGE_CIPHER_SPEC		 292
#define SSL_F_SSL3_ENC					 134
#define SSL_F_SSL3_GENERATE_KEY_BLOCK			 238
#define SSL_F_SSL3_GET_CERTIFICATE_REQUEST		 135
#define SSL_F_SSL3_GET_CERT_STATUS			 289
#define SSL_F_SSL3_GET_CERT_VERIFY			 136
#define SSL_F_SSL3_GET_CHANNEL_ID			 317
#define SSL_F_SSL3_GET_CLIENT_CERTIFICATE		 137
#define SSL_F_SSL3_GET_CLIENT_HELLO			 138
#define SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE		 139
#define SSL_F_SSL3_GET_FINISHED				 140
#define SSL_F_SSL3_GET_KEY_EXCHANGE			 141
#define SSL_F_SSL3_GET_MESSAGE				 142
#define SSL_F_SSL3_GET_NEW_SESSION_TICKET		 283
#define SSL_F_SSL3_GET_NEXT_PROTO			 306
#define SSL_F_SSL3_GET_RECORD				 143
#define SSL_F_SSL3_GET_SERVER_CERTIFICATE		 144
#define SSL_F_SSL3_GET_SERVER_DONE			 145
#define SSL_F_SSL3_GET_SERVER_HELLO			 146
#define SSL_F_SSL3_HANDSHAKE_MAC			 285
#define SSL_F_SSL3_NEW_SESSION_TICKET			 287
#define SSL_F_SSL3_OUTPUT_CERT_CHAIN			 147
#define SSL_F_SSL3_PEEK					 235
#define SSL_F_SSL3_READ_BYTES				 148
#define SSL_F_SSL3_READ_N				 149
#define SSL_F_SSL3_SEND_CERTIFICATE_REQUEST		 150
#define SSL_F_SSL3_SEND_CHANNEL_ID			 318
#define SSL_F_SSL3_SEND_CLIENT_CERTIFICATE		 151
#define SSL_F_SSL3_SEND_CLIENT_KEY_EXCHANGE		 152
#define SSL_F_SSL3_SEND_CLIENT_VERIFY			 153
#define SSL_F_SSL3_SEND_SERVER_CERTIFICATE		 154
#define SSL_F_SSL3_SEND_SERVER_HELLO			 242
#define SSL_F_SSL3_SEND_SERVER_KEY_EXCHANGE		 155
#define SSL_F_SSL3_SETUP_KEY_BLOCK			 157
#define SSL_F_SSL3_SETUP_READ_BUFFER			 156
#define SSL_F_SSL3_SETUP_WRITE_BUFFER			 291
#define SSL_F_SSL3_WRITE_BYTES				 158
#define SSL_F_SSL3_WRITE_PENDING			 159
#define SSL_F_SSL_ADD_CLIENTHELLO_RENEGOTIATE_EXT	 298
#define SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT		 277
#define SSL_F_SSL_ADD_CLIENTHELLO_USE_SRTP_EXT		 307
#define SSL_F_SSL_ADD_DIR_CERT_SUBJECTS_TO_STACK	 215
#define SSL_F_SSL_ADD_FILE_CERT_SUBJECTS_TO_STACK	 216
#define SSL_F_SSL_ADD_SERVERHELLO_RENEGOTIATE_EXT	 299
#define SSL_F_SSL_ADD_SERVERHELLO_TLSEXT		 278
#define SSL_F_SSL_ADD_SERVERHELLO_USE_SRTP_EXT		 308
#define SSL_F_SSL_BAD_METHOD				 160
#define SSL_F_SSL_BYTES_TO_CIPHER_LIST			 161
#define SSL_F_SSL_CERT_DUP				 221
#define SSL_F_SSL_CERT_INST				 222
#define SSL_F_SSL_CERT_INSTANTIATE			 214
#define SSL_F_SSL_CERT_NEW				 162
#define SSL_F_SSL_CHECK_PRIVATE_KEY			 163
#define SSL_F_SSL_CHECK_SERVERHELLO_TLSEXT		 280
#define SSL_F_SSL_CHECK_SRVR_ECC_CERT_AND_ALG		 279
#define SSL_F_SSL_CIPHER_PROCESS_RULESTR		 230
#define SSL_F_SSL_CIPHER_STRENGTH_SORT			 231
#define SSL_F_SSL_CLEAR					 164
#define SSL_F_SSL_COMP_ADD_COMPRESSION_METHOD		 165
#define SSL_F_SSL_CREATE_CIPHER_LIST			 166
#define SSL_F_SSL_CTRL					 232
#define SSL_F_SSL_CTX_CHECK_PRIVATE_KEY			 168
#define SSL_F_SSL_CTX_MAKE_PROFILES			 309
#define SSL_F_SSL_CTX_NEW				 169
#define SSL_F_SSL_CTX_SET_CIPHER_LIST			 269
#define SSL_F_SSL_CTX_SET_CLIENT_CERT_ENGINE		 290
#define SSL_F_SSL_CTX_SET_PURPOSE			 226
#define SSL_F_SSL_CTX_SET_SESSION_ID_CONTEXT		 219
#define SSL_F_SSL_CTX_SET_SSL_VERSION			 170
#define SSL_F_SSL_CTX_SET_TRUST				 229
#define SSL_F_SSL_CTX_USE_CERTIFICATE			 171
#define SSL_F_SSL_CTX_USE_CERTIFICATE_ASN1		 172
#define SSL_F_SSL_CTX_USE_CERTIFICATE_CHAIN_FILE	 220
#define SSL_F_SSL_CTX_USE_CERTIFICATE_FILE		 173
#define SSL_F_SSL_CTX_USE_PRIVATEKEY			 174
#define SSL_F_SSL_CTX_USE_PRIVATEKEY_ASN1		 175
#define SSL_F_SSL_CTX_USE_PRIVATEKEY_FILE		 176
#define SSL_F_SSL_CTX_USE_PSK_IDENTITY_HINT		 272
#define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY			 177
#define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_ASN1		 178
#define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_FILE		 179
#define SSL_F_SSL_DO_HANDSHAKE				 180
#define SSL_F_SSL_GET_NEW_SESSION			 181
#define SSL_F_SSL_GET_PREV_SESSION			 217
#define SSL_F_SSL_GET_SERVER_SEND_CERT			 182
#define SSL_F_SSL_GET_SERVER_SEND_PKEY			 317
#define SSL_F_SSL_GET_SIGN_PKEY				 183
#define SSL_F_SSL_INIT_WBIO_BUFFER			 184
#define SSL_F_SSL_LOAD_CLIENT_CA_FILE			 185
#define SSL_F_SSL_NEW					 186
#define SSL_F_SSL_PARSE_CLIENTHELLO_RENEGOTIATE_EXT	 300
#define SSL_F_SSL_PARSE_CLIENTHELLO_TLSEXT		 302
#define SSL_F_SSL_PARSE_CLIENTHELLO_USE_SRTP_EXT	 310
#define SSL_F_SSL_PARSE_SERVERHELLO_RENEGOTIATE_EXT	 301
#define SSL_F_SSL_PARSE_SERVERHELLO_TLSEXT		 303
#define SSL_F_SSL_PARSE_SERVERHELLO_USE_SRTP_EXT	 311
#define SSL_F_SSL_PEEK					 270
#define SSL_F_SSL_PREPARE_CLIENTHELLO_TLSEXT		 281
#define SSL_F_SSL_PREPARE_SERVERHELLO_TLSEXT		 282
#define SSL_F_SSL_READ					 223
#define SSL_F_SSL_RSA_PRIVATE_DECRYPT			 187
#define SSL_F_SSL_RSA_PUBLIC_ENCRYPT			 188
#define SSL_F_SSL_SESSION_NEW				 189
#define SSL_F_SSL_SESSION_PRINT_FP			 190
#define SSL_F_SSL_SESSION_SET1_ID_CONTEXT		 312
#define SSL_F_SSL_SESS_CERT_NEW				 225
#define SSL_F_SSL_SET_CERT				 191
#define SSL_F_SSL_SET_CIPHER_LIST			 271
#define SSL_F_SSL_SET_FD				 192
#define SSL_F_SSL_SET_PKEY				 193
#define SSL_F_SSL_SET_PURPOSE				 227
#define SSL_F_SSL_SET_RFD				 194
#define SSL_F_SSL_SET_SESSION				 195
#define SSL_F_SSL_SET_SESSION_ID_CONTEXT		 218
#define SSL_F_SSL_SET_SESSION_TICKET_EXT		 294
#define SSL_F_SSL_SET_TRUST				 228
#define SSL_F_SSL_SET_WFD				 196
#define SSL_F_SSL_SHUTDOWN				 224
#define SSL_F_SSL_SRP_CTX_INIT				 313
#define SSL_F_SSL_UNDEFINED_CONST_FUNCTION		 243
#define SSL_F_SSL_UNDEFINED_FUNCTION			 197
#define SSL_F_SSL_UNDEFINED_VOID_FUNCTION		 244
#define SSL_F_SSL_USE_CERTIFICATE			 198
#define SSL_F_SSL_USE_CERTIFICATE_ASN1			 199
#define SSL_F_SSL_USE_CERTIFICATE_CHAIN			 2000
#define SSL_F_SSL_USE_CERTIFICATE_FILE			 200
#define SSL_F_SSL_USE_PRIVATEKEY			 201
#define SSL_F_SSL_USE_PRIVATEKEY_ASN1			 202
#define SSL_F_SSL_USE_PRIVATEKEY_FILE			 203
#define SSL_F_SSL_USE_PSK_IDENTITY_HINT			 273
#define SSL_F_SSL_USE_RSAPRIVATEKEY			 204
#define SSL_F_SSL_USE_RSAPRIVATEKEY_ASN1		 205
#define SSL_F_SSL_USE_RSAPRIVATEKEY_FILE		 206
#define SSL_F_SSL_VERIFY_CERT_CHAIN			 207
#define SSL_F_SSL_WRITE					 208
#define SSL_F_TLS1_CERT_VERIFY_MAC			 286
#define SSL_F_TLS1_CHANGE_CIPHER_STATE			 209
#define SSL_F_TLS1_CHECK_SERVERHELLO_TLSEXT		 274
#define SSL_F_TLS1_ENC					 210
#define SSL_F_TLS1_EXPORT_KEYING_MATERIAL		 314
#define SSL_F_TLS1_HEARTBEAT				 315
#define SSL_F_TLS1_PREPARE_CLIENTHELLO_TLSEXT		 275
#define SSL_F_TLS1_PREPARE_SERVERHELLO_TLSEXT		 276
#define SSL_F_TLS1_PRF					 284
#define SSL_F_TLS1_SETUP_KEY_BLOCK			 211
#define SSL_F_WRITE_PENDING				 212

/* Reason codes. */
#define SSL_R_APP_DATA_IN_HANDSHAKE			 100
#define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 272
#define SSL_R_BAD_ALERT_RECORD				 101
#define SSL_R_BAD_AUTHENTICATION_TYPE			 102
#define SSL_R_BAD_CHANGE_CIPHER_SPEC			 103
#define SSL_R_BAD_CHECKSUM				 104
#define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK		 106
#define SSL_R_BAD_DECOMPRESSION				 107
#define SSL_R_BAD_DH_G_LENGTH				 108
#define SSL_R_BAD_DH_PUB_KEY_LENGTH			 109
#define SSL_R_BAD_DH_P_LENGTH				 110
#define SSL_R_BAD_DIGEST_LENGTH				 111
#define SSL_R_BAD_DSA_SIGNATURE				 112
#define SSL_R_BAD_ECC_CERT				 304
#define SSL_R_BAD_ECDSA_SIGNATURE			 305
#define SSL_R_BAD_ECPOINT				 306
#define SSL_R_BAD_HANDSHAKE_LENGTH			 332
#define SSL_R_BAD_HELLO_REQUEST				 105
#define SSL_R_BAD_LENGTH				 271
#define SSL_R_BAD_MAC_DECODE				 113
#define SSL_R_BAD_MAC_LENGTH				 333
#define SSL_R_BAD_MESSAGE_TYPE				 114
#define SSL_R_BAD_PACKET_LENGTH				 115
#define SSL_R_BAD_PROTOCOL_VERSION_NUMBER		 116
#define SSL_R_BAD_PSK_IDENTITY_HINT_LENGTH		 316
#define SSL_R_BAD_RESPONSE_ARGUMENT			 117
#define SSL_R_BAD_RSA_DECRYPT				 118
#define SSL_R_BAD_RSA_ENCRYPT				 119
#define SSL_R_BAD_RSA_E_LENGTH				 120
#define SSL_R_BAD_RSA_MODULUS_LENGTH			 121
#define SSL_R_BAD_RSA_SIGNATURE				 122
#define SSL_R_BAD_SIGNATURE				 123
#define SSL_R_BAD_SRP_A_LENGTH				 347
#define SSL_R_BAD_SRP_B_LENGTH				 348
#define SSL_R_BAD_SRP_G_LENGTH				 349
#define SSL_R_BAD_SRP_N_LENGTH				 350
#define SSL_R_BAD_SRP_S_LENGTH				 351
#define SSL_R_BAD_SRTP_MKI_VALUE			 352
#define SSL_R_BAD_SRTP_PROTECTION_PROFILE_LIST		 353
#define SSL_R_BAD_SSL_FILETYPE				 124
#define SSL_R_BAD_SSL_SESSION_ID_LENGTH			 125
#define SSL_R_BAD_STATE					 126
#define SSL_R_BAD_WRITE_RETRY				 127
#define SSL_R_BIO_NOT_SET				 128
#define SSL_R_BLOCK_CIPHER_PAD_IS_WRONG			 129
#define SSL_R_BN_LIB					 130
#define SSL_R_CANNOT_SERIALIZE_PUBLIC_KEY		 376
#define SSL_R_CA_DN_LENGTH_MISMATCH			 131
#define SSL_R_CA_DN_TOO_LONG				 132
#define SSL_R_CCS_RECEIVED_EARLY			 133
#define SSL_R_CERTIFICATE_VERIFY_FAILED			 134
#define SSL_R_CERT_LENGTH_MISMATCH			 135
#define SSL_R_CHALLENGE_IS_DIFFERENT			 136
#define SSL_R_CHANNEL_ID_NOT_P256			 375
#define SSL_R_CHANNEL_ID_SIGNATURE_INVALID		 371
#define SSL_R_CIPHER_CODE_WRONG_LENGTH			 137
#define SSL_R_CIPHER_OR_HASH_UNAVAILABLE		 138
#define SSL_R_CIPHER_TABLE_SRC_ERROR			 139
#define SSL_R_CLIENTHELLO_TLSEXT			 226
#define SSL_R_COMPRESSED_LENGTH_TOO_LONG		 140
#define SSL_R_COMPRESSION_DISABLED			 343
#define SSL_R_COMPRESSION_FAILURE			 141
#define SSL_R_COMPRESSION_ID_NOT_WITHIN_PRIVATE_RANGE	 307
#define SSL_R_COMPRESSION_LIBRARY_ERROR			 142
#define SSL_R_CONNECTION_ID_IS_DIFFERENT		 143
#define SSL_R_CONNECTION_TYPE_NOT_SET			 144
#define SSL_R_COOKIE_MISMATCH				 308
#define SSL_R_D2I_ECDSA_SIG				 379
#define SSL_R_DATA_BETWEEN_CCS_AND_FINISHED		 145
#define SSL_R_DATA_LENGTH_TOO_LONG			 146
#define SSL_R_DECRYPTION_FAILED				 147
#define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC	 281
#define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG		 148
#define SSL_R_DIGEST_CHECK_FAILED			 149
#define SSL_R_DTLS_MESSAGE_TOO_BIG			 334
#define SSL_R_DUPLICATE_COMPRESSION_ID			 309
#define SSL_R_ECC_CERT_NOT_FOR_KEY_AGREEMENT		 317
#define SSL_R_ECC_CERT_NOT_FOR_SIGNING			 318
#define SSL_R_ECC_CERT_SHOULD_HAVE_RSA_SIGNATURE	 322
#define SSL_R_ECC_CERT_SHOULD_HAVE_SHA1_SIGNATURE	 323
#define SSL_R_ECGROUP_TOO_LARGE_FOR_CIPHER		 310
#define SSL_R_EMPTY_SRTP_PROTECTION_PROFILE_LIST	 354
#define SSL_R_ENCRYPTED_LENGTH_TOO_LONG			 150
#define SSL_R_ERROR_GENERATING_TMP_RSA_KEY		 282
#define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST		 151
#define SSL_R_EVP_DIGESTSIGNFINAL_FAILED		 377
#define SSL_R_EVP_DIGESTSIGNINIT_FAILED			 378
#define SSL_R_EXCESSIVE_MESSAGE_SIZE			 152
#define SSL_R_EXTRA_DATA_IN_MESSAGE			 153
#define SSL_R_GOT_A_FIN_BEFORE_A_CCS			 154
#define SSL_R_GOT_CHANNEL_ID_BEFORE_A_CCS		 372
#define SSL_R_GOT_NEXT_PROTO_BEFORE_A_CCS		 355
#define SSL_R_GOT_NEXT_PROTO_WITHOUT_EXTENSION		 356
#define SSL_R_HTTPS_PROXY_REQUEST			 155
#define SSL_R_HTTP_REQUEST				 156
#define SSL_R_ILLEGAL_PADDING				 283
#define SSL_R_INCONSISTENT_COMPRESSION			 340
#define SSL_R_INVALID_CHALLENGE_LENGTH			 158
#define SSL_R_INVALID_COMMAND				 280
#define SSL_R_INVALID_COMPRESSION_ALGORITHM		 341
#define SSL_R_INVALID_MESSAGE				 374
#define SSL_R_INVALID_PURPOSE				 278
#define SSL_R_INVALID_SRP_USERNAME			 357
#define SSL_R_INVALID_STATUS_RESPONSE			 328
#define SSL_R_INVALID_TICKET_KEYS_LENGTH		 325
#define SSL_R_INVALID_TRUST				 279
#define SSL_R_KEY_ARG_TOO_LONG				 284
#define SSL_R_KRB5					 285
#define SSL_R_KRB5_C_CC_PRINC				 286
#define SSL_R_KRB5_C_GET_CRED				 287
#define SSL_R_KRB5_C_INIT				 288
#define SSL_R_KRB5_C_MK_REQ				 289
#define SSL_R_KRB5_S_BAD_TICKET				 290
#define SSL_R_KRB5_S_INIT				 291
#define SSL_R_KRB5_S_RD_REQ				 292
#define SSL_R_KRB5_S_TKT_EXPIRED			 293
#define SSL_R_KRB5_S_TKT_NYV				 294
#define SSL_R_KRB5_S_TKT_SKEW				 295
#define SSL_R_LENGTH_MISMATCH				 159
#define SSL_R_LENGTH_TOO_SHORT				 160
#define SSL_R_LIBRARY_BUG				 274
#define SSL_R_LIBRARY_HAS_NO_CIPHERS			 161
#define SSL_R_MESSAGE_TOO_LONG				 296
#define SSL_R_MISSING_DH_DSA_CERT			 162
#define SSL_R_MISSING_DH_KEY				 163
#define SSL_R_MISSING_DH_RSA_CERT			 164
#define SSL_R_MISSING_DSA_SIGNING_CERT			 165
#define SSL_R_MISSING_EXPORT_TMP_DH_KEY			 166
#define SSL_R_MISSING_EXPORT_TMP_RSA_KEY		 167
#define SSL_R_MISSING_RSA_CERTIFICATE			 168
#define SSL_R_MISSING_RSA_ENCRYPTING_CERT		 169
#define SSL_R_MISSING_RSA_SIGNING_CERT			 170
#define SSL_R_MISSING_SRP_PARAM				 358
#define SSL_R_MISSING_TMP_DH_KEY			 171
#define SSL_R_MISSING_TMP_ECDH_KEY			 311
#define SSL_R_MISSING_TMP_RSA_KEY			 172
#define SSL_R_MISSING_TMP_RSA_PKEY			 173
#define SSL_R_MISSING_VERIFY_MESSAGE			 174
#define SSL_R_MULTIPLE_SGC_RESTARTS			 346
#define SSL_R_NON_SSLV2_INITIAL_PACKET			 175
#define SSL_R_NO_CERTIFICATES_RETURNED			 176
#define SSL_R_NO_CERTIFICATE_ASSIGNED			 177
#define SSL_R_NO_CERTIFICATE_RETURNED			 178
#define SSL_R_NO_CERTIFICATE_SET			 179
#define SSL_R_NO_CERTIFICATE_SPECIFIED			 180
#define SSL_R_NO_CIPHERS_AVAILABLE			 181
#define SSL_R_NO_CIPHERS_PASSED				 182
#define SSL_R_NO_CIPHERS_SPECIFIED			 183
#define SSL_R_NO_CIPHER_LIST				 184
#define SSL_R_NO_CIPHER_MATCH				 185
#define SSL_R_NO_CLIENT_CERT_METHOD			 331
#define SSL_R_NO_CLIENT_CERT_RECEIVED			 186
#define SSL_R_NO_COMPRESSION_SPECIFIED			 187
#define SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER		 330
#define SSL_R_NO_METHOD_SPECIFIED			 188
#define SSL_R_NO_P256_SUPPORT				 373
#define SSL_R_NO_PRIVATEKEY				 189
#define SSL_R_NO_PRIVATE_KEY_ASSIGNED			 190
#define SSL_R_NO_PROTOCOLS_AVAILABLE			 191
#define SSL_R_NO_PUBLICKEY				 192
#define SSL_R_NO_RENEGOTIATION				 339
#define SSL_R_NO_REQUIRED_DIGEST			 324
#define SSL_R_NO_SHARED_CIPHER				 193
#define SSL_R_NO_SRTP_PROFILES				 359
#define SSL_R_NO_VERIFY_CALLBACK			 194
#define SSL_R_NULL_SSL_CTX				 195
#define SSL_R_NULL_SSL_METHOD_PASSED			 196
#define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED		 197
#define SSL_R_OLD_SESSION_COMPRESSION_ALGORITHM_NOT_RETURNED 344
#define SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE		 297
#define SSL_R_OPAQUE_PRF_INPUT_TOO_LONG			 327
#define SSL_R_PACKET_LENGTH_TOO_LONG			 198
#define SSL_R_PARSE_TLSEXT				 227
#define SSL_R_PATH_TOO_LONG				 270
#define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE		 199
#define SSL_R_PEER_ERROR				 200
#define SSL_R_PEER_ERROR_CERTIFICATE			 201
#define SSL_R_PEER_ERROR_NO_CERTIFICATE			 202
#define SSL_R_PEER_ERROR_NO_CIPHER			 203
#define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE	 204
#define SSL_R_PRE_MAC_LENGTH_TOO_LONG			 205
#define SSL_R_PROBLEMS_MAPPING_CIPHER_FUNCTIONS		 206
#define SSL_R_PROTOCOL_IS_SHUTDOWN			 207
#define SSL_R_PSK_IDENTITY_NOT_FOUND			 223
#define SSL_R_PSK_NO_CLIENT_CB				 224
#define SSL_R_PSK_NO_SERVER_CB				 225
#define SSL_R_PUBLIC_KEY_ENCRYPT_ERROR			 208
#define SSL_R_PUBLIC_KEY_IS_NOT_RSA			 209
#define SSL_R_PUBLIC_KEY_NOT_RSA			 210
#define SSL_R_READ_BIO_NOT_SET				 211
#define SSL_R_READ_TIMEOUT_EXPIRED			 312
#define SSL_R_READ_WRONG_PACKET_TYPE			 212
#define SSL_R_RECORD_LENGTH_MISMATCH			 213
#define SSL_R_RECORD_TOO_LARGE				 214
#define SSL_R_RECORD_TOO_SMALL				 298
#define SSL_R_RENEGOTIATE_EXT_TOO_LONG			 335
#define SSL_R_RENEGOTIATION_ENCODING_ERR		 336
#define SSL_R_RENEGOTIATION_MISMATCH			 337
#define SSL_R_REQUIRED_CIPHER_MISSING			 215
#define SSL_R_REQUIRED_COMPRESSSION_ALGORITHM_MISSING	 342
#define SSL_R_REUSE_CERT_LENGTH_NOT_ZERO		 216
#define SSL_R_REUSE_CERT_TYPE_NOT_ZERO			 217
#define SSL_R_REUSE_CIPHER_LIST_NOT_ZERO		 218
#define SSL_R_SCSV_RECEIVED_WHEN_RENEGOTIATING		 345
#define SSL_R_SERVERHELLO_TLSEXT			 275
#define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED		 277
#define SSL_R_SESSION_MAY_NOT_BE_CREATED		 2000
#define SSL_R_SHORT_READ				 219
#define SSL_R_SIGNATURE_ALGORITHMS_ERROR		 360
#define SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE	 220
#define SSL_R_SRP_A_CALC				 361
#define SSL_R_SRTP_COULD_NOT_ALLOCATE_PROFILES		 362
#define SSL_R_SRTP_PROTECTION_PROFILE_LIST_TOO_LONG	 363
#define SSL_R_SRTP_UNKNOWN_PROTECTION_PROFILE		 364
#define SSL_R_SSL23_DOING_SESSION_ID_REUSE		 221
#define SSL_R_SSL2_CONNECTION_ID_TOO_LONG		 299
#define SSL_R_SSL3_EXT_INVALID_ECPOINTFORMAT		 321
#define SSL_R_SSL3_EXT_INVALID_SERVERNAME		 319
#define SSL_R_SSL3_EXT_INVALID_SERVERNAME_TYPE		 320
#define SSL_R_SSL3_SESSION_ID_TOO_LONG			 300
#define SSL_R_SSL3_SESSION_ID_TOO_SHORT			 222
#define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE		 1042
#define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC		 1020
#define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED		 1045
#define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED		 1044
#define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN		 1046
#define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE		 1030
#define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE		 1040
#define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER		 1047
#define SSL_R_SSLV3_ALERT_NO_CERTIFICATE		 1041
#define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE		 1010
#define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE	 1043
#define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION	 228
#define SSL_R_SSL_HANDSHAKE_FAILURE			 229
#define SSL_R_SSL_LIBRARY_HAS_NO_CIPHERS		 230
#define SSL_R_SSL_SESSION_ID_CALLBACK_FAILED		 301
#define SSL_R_SSL_SESSION_ID_CONFLICT			 302
#define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG		 273
#define SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH		 303
#define SSL_R_SSL_SESSION_ID_IS_DIFFERENT		 231
#define SSL_R_TLSV1_ALERT_ACCESS_DENIED			 1049
#define SSL_R_TLSV1_ALERT_DECODE_ERROR			 1050
#define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED		 1021
#define SSL_R_TLSV1_ALERT_DECRYPT_ERROR			 1051
#define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION		 1060
#define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY		 1071
#define SSL_R_TLSV1_ALERT_INTERNAL_ERROR		 1080
#define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION		 1100
#define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION		 1070
#define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW		 1022
#define SSL_R_TLSV1_ALERT_UNKNOWN_CA			 1048
#define SSL_R_TLSV1_ALERT_USER_CANCELLED		 1090
#define SSL_R_TLSV1_BAD_CERTIFICATE_HASH_VALUE		 1114
#define SSL_R_TLSV1_BAD_CERTIFICATE_STATUS_RESPONSE	 1113
#define SSL_R_TLSV1_CERTIFICATE_UNOBTAINABLE		 1111
#define SSL_R_TLSV1_UNRECOGNIZED_NAME			 1112
#define SSL_R_TLSV1_UNSUPPORTED_EXTENSION		 1110
#define SSL_R_TLS_CLIENT_CERT_REQ_WITH_ANON_CIPHER	 232
#define SSL_R_TLS_HEARTBEAT_PEER_DOESNT_ACCEPT		 365
#define SSL_R_TLS_HEARTBEAT_PENDING			 366
#define SSL_R_TLS_ILLEGAL_EXPORTER_LABEL		 367
#define SSL_R_TLS_INVALID_ECPOINTFORMAT_LIST		 157
#define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 233
#define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG	 234
#define SSL_R_TRIED_TO_USE_UNSUPPORTED_CIPHER		 235
#define SSL_R_UNABLE_TO_DECODE_DH_CERTS			 236
#define SSL_R_UNABLE_TO_DECODE_ECDH_CERTS		 313
#define SSL_R_UNABLE_TO_EXTRACT_PUBLIC_KEY		 237
#define SSL_R_UNABLE_TO_FIND_DH_PARAMETERS		 238
#define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS		 314
#define SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS	 239
#define SSL_R_UNABLE_TO_FIND_SSL_METHOD			 240
#define SSL_R_UNABLE_TO_LOAD_SSL2_MD5_ROUTINES		 241
#define SSL_R_UNABLE_TO_LOAD_SSL3_MD5_ROUTINES		 242
#define SSL_R_UNABLE_TO_LOAD_SSL3_SHA1_ROUTINES		 243
#define SSL_R_UNEXPECTED_MESSAGE			 244
#define SSL_R_UNEXPECTED_RECORD				 245
#define SSL_R_UNINITIALIZED				 276
#define SSL_R_UNKNOWN_ALERT_TYPE			 246
#define SSL_R_UNKNOWN_CERTIFICATE_TYPE			 247
#define SSL_R_UNKNOWN_CIPHER_RETURNED			 248
#define SSL_R_UNKNOWN_CIPHER_TYPE			 249
#define SSL_R_UNKNOWN_DIGEST				 368
#define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE			 250
#define SSL_R_UNKNOWN_PKEY_TYPE				 251
#define SSL_R_UNKNOWN_PROTOCOL				 252
#define SSL_R_UNKNOWN_REMOTE_ERROR_TYPE			 253
#define SSL_R_UNKNOWN_SSL_VERSION			 254
#define SSL_R_UNKNOWN_STATE				 255
#define SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED	 338
#define SSL_R_UNSUPPORTED_CIPHER			 256
#define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM		 257
#define SSL_R_UNSUPPORTED_DIGEST_TYPE			 326
#define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE		 315
#define SSL_R_UNSUPPORTED_PROTOCOL			 258
#define SSL_R_UNSUPPORTED_SSL_VERSION			 259
#define SSL_R_UNSUPPORTED_STATUS_TYPE			 329
#define SSL_R_USE_SRTP_NOT_NEGOTIATED			 369
#define SSL_R_WRITE_BIO_NOT_SET				 260
#define SSL_R_WRONG_CIPHER_RETURNED			 261
#define SSL_R_WRONG_MESSAGE_TYPE			 262
#define SSL_R_WRONG_NUMBER_OF_KEY_BITS			 263
#define SSL_R_WRONG_SIGNATURE_LENGTH			 264
#define SSL_R_WRONG_SIGNATURE_SIZE			 265
#define SSL_R_WRONG_SIGNATURE_TYPE			 370
#define SSL_R_WRONG_SSL_VERSION				 266
#define SSL_R_WRONG_VERSION_NUMBER			 267
#define SSL_R_X509_LIB					 268
#define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS		 269
#define SSL_R_UNEXPECTED_CCS				 388

#ifdef  __cplusplus
}
#endif
#endif