diff --git a/LICENSE b/LICENSE
deleted file mode 100644
index d216912..0000000
--- a/LICENSE
+++ /dev/null
@@ -1,13 +0,0 @@
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use these files except in compliance with the License.
-You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-
-Copyright 2005-2010 Google, Inc.
diff --git a/Makefile.in b/Makefile.in
index e806735..b9a19fa 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -41,10 +41,10 @@
 	INSTALL NEWS config.guess config.sub depcomp install-sh \
 	ltmain.sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
@@ -74,9 +74,11 @@
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -105,6 +107,8 @@
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -125,6 +129,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -134,11 +139,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -153,6 +153,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -178,6 +179,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -212,7 +214,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -234,7 +235,7 @@
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-am--refresh:
+am--refresh: Makefile
 	@:
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
@@ -270,10 +271,8 @@
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
+	@if test ! -f $@; then rm -f stamp-h1; else :; fi
+	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -284,10 +283,8 @@
 	touch $@
 
 src/include/fst/config.h: src/include/fst/stamp-h2
-	@if test ! -f $@; then \
-	  rm -f src/include/fst/stamp-h2; \
-	  $(MAKE) $(AM_MAKEFLAGS) src/include/fst/stamp-h2; \
-	else :; fi
+	@if test ! -f $@; then rm -f src/include/fst/stamp-h2; else :; fi
+	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) src/include/fst/stamp-h2; else :; fi
 
 src/include/fst/stamp-h2: $(top_srcdir)/src/include/fst/config.h.in $(top_builddir)/config.status
 	@rm -f src/include/fst/stamp-h2
@@ -512,7 +509,11 @@
 	$(am__remove_distdir)
 
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 	$(am__remove_distdir)
 
 dist-lzma: distdir
@@ -520,7 +521,7 @@
 	$(am__remove_distdir)
 
 dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 	$(am__remove_distdir)
 
 dist-tarZ: distdir
@@ -551,6 +552,8 @@
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lzma*) \
 	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
@@ -570,6 +573,7 @@
 	  && am__cwd=`pwd` \
 	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
@@ -598,8 +602,16 @@
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
@@ -630,10 +642,15 @@
 
 installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -721,8 +738,8 @@
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am am--refresh check check-am clean clean-generic \
 	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
-	distcheck distclean distclean-generic distclean-hdr \
+	dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \
+	dist-zip distcheck distclean distclean-generic distclean-hdr \
 	distclean-libtool distclean-tags distcleancheck distdir \
 	distuninstallcheck dvi dvi-am html html-am info info-am \
 	install install-am install-data install-data-am install-dvi \
diff --git a/NEWS b/NEWS
index 530d7b4..8cb9527 100644
--- a/NEWS
+++ b/NEWS
@@ -17,6 +17,12 @@
   * Added 'fst' as possible far writer type (1.3.2)
   * phi matcher can now accept 0 as the phi label (1.3.2)
   * Added ngram-fst extension (1.3.2)
+  * Improved performance of PDT composition (1.3.3)
+  * Memory-map support (1.3.3)
+  * Fixed cross-FST serialization issues (1.3.3)
+  * Fixed NGramFst off-by-one issue (1.3.3)
+  * farextract now allows one to specify a list of comma-separated keys,
+    including key ranges (1.3.3)
 
 OpenFst - Release 1.2
    * Added lookahead matching and filtering for faster composition
diff --git a/NOTICE b/NOTICE
deleted file mode 100644
index d216912..0000000
--- a/NOTICE
+++ /dev/null
@@ -1,13 +0,0 @@
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use these files except in compliance with the License.
-You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-Unless required by applicable law or agreed to in writing, software
-distributed under the License is distributed on an "AS IS" BASIS,
-WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-See the License for the specific language governing permissions and
-limitations under the License.
-
-Copyright 2005-2010 Google, Inc.
diff --git a/README.android b/README.android
index 14f41f7..3804d81 100644
--- a/README.android
+++ b/README.android
@@ -1,3 +1,3 @@
-Copy of openfst-1.3.2-CL32004048 from Greco3.
+Copy of openfst-1.3.3-CL41851770.tar.gz from Greco3.
 
 Android.mk file added.
diff --git a/aclocal.m4 b/aclocal.m4
index a47eef2..2dd8f06 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,7 +1,8 @@
-# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.11.3 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
+# Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,18 +14,21 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
-[m4_warning([this file was generated for autoconf 2.65.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
+# Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 1
+
 # AM_AUTOMAKE_VERSION(VERSION)
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
@@ -34,7 +38,7 @@
 [am__api_version='1.11'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.1], [],
+m4_if([$1], [1.11.3], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -50,19 +54,21 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.1])dnl
+[AM_AUTOMAKE_VERSION([1.11.3])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 1
+
 # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
 # $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
 # `$srcdir', `$srcdir/..', or `$srcdir/../..'.
@@ -144,14 +150,14 @@
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
-# Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
+# 2010, 2011 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 10
+# serial 12
 
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@@ -191,6 +197,7 @@
   # instance it was reported that on HP-UX the gcc test will end up
   # making a dummy file named `D' -- because `-MD' means `put the output
   # in D'.
+  rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.
@@ -255,7 +262,7 @@
 	break
       fi
       ;;
-    msvisualcpp | msvcmsys)
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
       # This compiler won't grok `-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
@@ -320,10 +327,13 @@
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
+  am__nodep='_no'
 fi
 AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
 AC_SUBST([AMDEPBACKSLASH])dnl
 _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
 ])
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
@@ -545,12 +555,15 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
+# Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 1
+
 # AM_PROG_INSTALL_SH
 # ------------------
 # Define $install_sh.
@@ -682,12 +695,15 @@
 fi
 ])
 
-# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
+# Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 1
+
 # AM_PROG_MKDIR_P
 # ---------------
 # Check for `mkdir -p'.
@@ -710,13 +726,14 @@
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
+# Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -724,13 +741,13 @@
 [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
 
 # _AM_SET_OPTION(NAME)
-# ------------------------------
+# --------------------
 # Set option NAME.  Presently that only means defining a flag for this option.
 AC_DEFUN([_AM_SET_OPTION],
 [m4_define(_AM_MANGLE_OPTION([$1]), 1)])
 
 # _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
+# ------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
 [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
@@ -806,12 +823,14 @@
 fi
 AC_MSG_RESULT(yes)])
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 1
+
 # AM_PROG_INSTALL_STRIP
 # ---------------------
 # One issue with vendor `install' (even GNU) is that you can't
@@ -834,13 +853,13 @@
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 2
+# serial 3
 
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
@@ -849,13 +868,13 @@
 AC_DEFUN([_AM_SUBST_NOTMAKE])
 
 # AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
+# --------------------------
 # Public sister of _AM_SUBST_NOTMAKE.
 AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -877,10 +896,11 @@
 # a tarball read from stdin.
 #     $(am__untar) < result.tar
 AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
 m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
      [m4_case([$1], [ustar],, [pax],,
               [m4_fatal([Unknown tar format])])
 AC_MSG_CHECKING([how to create a $1 tar archive])
@@ -949,7 +969,6 @@
 AC_SUBST([am__untar])
 ]) # _AM_PROG_TAR
 
-m4_include([m4/ax_check_icu.m4])
 m4_include([m4/libtool.m4])
 m4_include([m4/ltoptions.m4])
 m4_include([m4/ltsugar.m4])
diff --git a/config.guess b/config.guess
index e3a2116..d622a44 100755
--- a/config.guess
+++ b/config.guess
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-#   Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2009-06-10'
+timestamp='2012-02-10'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -27,16 +25,16 @@
 # the same distribution terms that you use for the rest of that program.
 
 
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
+# Originally written by Per Bothner.  Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
 #
 # This script attempts to guess a canonical system name similar to
 # config.sub.  If it succeeds, it prints the system name on stdout, and
 # exits with 0.  Otherwise, it exits with 1.
 #
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -56,8 +54,9 @@
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -144,7 +143,7 @@
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
 	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
 	# switched to ELF, *-*-netbsd* would select the old
 	# object file format.  This provides both forward
@@ -180,7 +179,7 @@
 		fi
 		;;
 	    *)
-	        os=netbsd
+		os=netbsd
 		;;
 	esac
 	# The OS release
@@ -223,7 +222,7 @@
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
 		;;
 	*5.*)
-	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
 		;;
 	esac
 	# According to Compaq, /usr/sbin/psrinfo has been available on
@@ -269,7 +268,10 @@
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit ;;
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
@@ -295,7 +297,7 @@
 	echo s390-ibm-zvmoe
 	exit ;;
     *:OS400:*:*)
-        echo powerpc-ibm-os400
+	echo powerpc-ibm-os400
 	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
@@ -333,6 +335,9 @@
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	eval $set_cc_for_build
 	SUN_ARCH="i386"
@@ -391,23 +396,23 @@
     # MiNT.  But MiNT is downward compatible to TOS, so this should
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
+	echo m68k-atari-mint${UNAME_RELEASE}
 	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
+	exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
+	echo m68k-atari-mint${UNAME_RELEASE}
 	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit ;;
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit ;;
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit ;;
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
     m68k:machten:*:*)
 	echo m68k-apple-machten${UNAME_RELEASE}
 	exit ;;
@@ -477,8 +482,8 @@
 	echo m88k-motorola-sysv3
 	exit ;;
     AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
 	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
 	then
 	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
@@ -491,7 +496,7 @@
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
- 	exit ;;
+	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
 	exit ;;
@@ -548,7 +553,7 @@
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[456])
+    *:AIX:*:[4567])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -591,52 +596,52 @@
 	    9000/[678][0-9][0-9])
 		if [ -x /usr/bin/getconf ]; then
 		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
 			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
+			esac ;;
+		    esac
 		fi
 		if [ "${HP_ARCH}" = "" ]; then
 		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
+		    sed 's/^		//' << EOF >$dummy.c
 
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
 
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
 
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
 EOF
 		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
 		    test -z "$HP_ARCH" && HP_ARCH=hppa
@@ -727,22 +732,22 @@
 	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-        exit ;;
+	exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-        exit ;;
+	exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-        exit ;;
+	exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-        exit ;;
+	exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-        exit ;;
+	exit ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit ;;
@@ -766,14 +771,14 @@
 	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit ;;
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
     5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
@@ -785,13 +790,12 @@
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
 	    amd64)
 		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	esac
 	exit ;;
     i*:CYGWIN*:*)
@@ -800,19 +804,22 @@
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
+    i*:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
     i*:windows32*:*)
-    	# uname -m includes "-pc" on this system.
-    	echo ${UNAME_MACHINE}-mingw32
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
 	exit ;;
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    *:Interix*:[3456]*)
-    	case ${UNAME_MACHINE} in
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
 	    x86)
 		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
-	    EM64T | authenticamd | genuineintel)
+	    authenticamd | genuineintel | EM64T)
 		echo x86_64-unknown-interix${UNAME_RELEASE}
 		exit ;;
 	    IA64)
@@ -854,6 +861,27 @@
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
     arm*:Linux:*:*)
 	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
@@ -861,20 +889,40 @@
 	then
 	    echo ${UNAME_MACHINE}-unknown-linux-gnu
 	else
-	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+	    fi
 	fi
 	exit ;;
     avr32*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-gnu
 	exit ;;
     frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	LIBC=gnu
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 	exit ;;
     ia64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
@@ -901,39 +949,18 @@
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     padre:Linux:*:*)
 	echo sparc-unknown-linux-gnu
 	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -942,14 +969,17 @@
 	  *)    echo hppa-unknown-linux-gnu ;;
 	esac
 	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
 	exit ;;
     sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     sh*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
@@ -957,67 +987,18 @@
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     vax:Linux:*:*)
 	echo ${UNAME_MACHINE}-dec-linux-gnu
 	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
     xtensa*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    i*86:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-			 | sed -ne '/supported targets:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported targets: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_targets" in
-	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-		;;
-	esac
-	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^LIBC/{
-		s: ::g
-		p
-	    }'`"
-	test x"${LIBC}" != x && {
-		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-		exit
-	}
-	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
-	;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
 	# earlier versions are messed up and put the nodename in both
@@ -1025,11 +1006,11 @@
 	echo i386-sequent-sysv4
 	exit ;;
     i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
 	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
+	# Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
 	exit ;;
     i*86:OS/2:*:*)
@@ -1061,7 +1042,7 @@
 	fi
 	exit ;;
     i*86:*:5:[678]*)
-    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
 	case `/bin/uname -X | grep "^Machine"` in
 	    *486*)	     UNAME_MACHINE=i486 ;;
 	    *Pentium)	     UNAME_MACHINE=i586 ;;
@@ -1089,13 +1070,13 @@
 	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i586.
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
 	# Note: whatever this is, it MUST be the same as what config.sub
 	# prints for the "djgpp" host, or else GDB configury will decide that
 	# this is a cross-build.
 	echo i586-pc-msdosdjgpp
-        exit ;;
+	exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
 	exit ;;
@@ -1130,8 +1111,8 @@
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
 	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && { echo i486-ncr-sysv4; exit; } ;;
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
     NCR*:*:4.2:* | MPRAS*:*:4.2:*)
 	OS_REL='.3'
 	test -r /etc/.relid \
@@ -1174,10 +1155,10 @@
 		echo ns32k-sni-sysv
 	fi
 	exit ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
@@ -1203,11 +1184,11 @@
 	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
+		echo mips-nec-sysv${UNAME_RELEASE}
 	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
+		echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-        exit ;;
+	exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
 	exit ;;
@@ -1247,6 +1228,16 @@
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
 	case $UNAME_PROCESSOR in
+	    i386)
+		eval $set_cc_for_build
+		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		      grep IS_64BIT_ARCH >/dev/null
+		  then
+		      UNAME_PROCESSOR="x86_64"
+		  fi
+		fi ;;
 	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
@@ -1262,6 +1253,9 @@
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
     NSE-?:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
@@ -1307,13 +1301,13 @@
 	echo pdp10-unknown-its
 	exit ;;
     SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
+	echo mips-sei-seiux${UNAME_RELEASE}
 	exit ;;
     *:DragonFly:*:*)
 	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit ;;
     *:*VMS:*:*)
-    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
 	case "${UNAME_MACHINE}" in
 	    A*) echo alpha-dec-vms ; exit ;;
 	    I*) echo ia64-dec-vms ; exit ;;
@@ -1331,6 +1325,9 @@
     i*86:AROS:*:*)
 	echo ${UNAME_MACHINE}-pc-aros
 	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1353,11 +1350,11 @@
 #include <sys/param.h>
   printf ("m68k-sony-newsos%s\n",
 #ifdef NEWSOS4
-          "4"
+	"4"
 #else
-	  ""
+	""
 #endif
-         ); exit (0);
+	); exit (0);
 #endif
 #endif
 
diff --git a/config.h.in b/config.h.in
index b78d2e6..423fcf8 100644
--- a/config.h.in
+++ b/config.h.in
@@ -3,9 +3,6 @@
 /* Define to 1 if you have the <dlfcn.h> header file. */
 #undef HAVE_DLFCN_H
 
-/* Define to 1 if you have the ICU library. */
-#undef HAVE_ICU
-
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 
@@ -18,10 +15,6 @@
 /* Define to 1 if you have the <stdlib.h> header file. */
 #undef HAVE_STDLIB_H
 
-/* Define to 1 if the system has the type `std::tr1::hash<long long
-   unsigned>'. */
-#undef HAVE_STD__TR1__HASH_LONG_LONG_UNSIGNED_
-
 /* Define to 1 if you have the <strings.h> header file. */
 #undef HAVE_STRINGS_H
 
@@ -37,9 +30,6 @@
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 
-/* Define to 1 if the system has the type `__gnu_cxx::slist<int>'. */
-#undef HAVE___GNU_CXX__SLIST_INT_
-
 /* Define to the sub-directory in which libtool stores uninstalled libraries.
    */
 #undef LT_OBJDIR
diff --git a/config.sub b/config.sub
index eb0389a..c894da4 100755
--- a/config.sub
+++ b/config.sub
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-#   Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2009-06-11'
+timestamp='2012-02-10'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -21,9 +21,7 @@
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -32,13 +30,16 @@
 
 
 # Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
+# diff and a properly formatted GNU ChangeLog entry.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
 # If it is invalid, we print an error message on stderr and exit with code 1.
 # Otherwise, we print the canonical config type on stdout and succeed.
 
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
 # This file is supposed to be the same for all GNU packages
 # and recognize all the CPU types, system types and aliases
 # that are meaningful with *any* GNU software.
@@ -72,8 +73,9 @@
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -120,13 +122,18 @@
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
   kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
   *)
     basic_machine=`echo $1 | sed 's/-[^-]*$//'`
     if [ $basic_machine != $1 ]
@@ -149,12 +156,12 @@
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray)
+	-apple | -axis | -knuth | -cray | -microblaze)
 		os=
 		basic_machine=$1
 		;;
-        -bluegene*)
-	        os=-cnk
+	-bluegene*)
+		os=-cnk
 		;;
 	-sim | -cisco | -oki | -wec | -winbond)
 		os=
@@ -170,10 +177,10 @@
 		os=-chorusos
 		basic_machine=$1
 		;;
- 	-chorusrdb)
- 		os=-chorusrdb
+	-chorusrdb)
+		os=-chorusrdb
 		basic_machine=$1
- 		;;
+		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
@@ -242,17 +249,22 @@
 	# Some are omitted here because they have special meanings below.
 	1750a | 580 \
 	| a29k \
+	| aarch64 | aarch64_be \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
 	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+        | be32 | be64 \
 	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
 	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
+	| le32 | le64 \
 	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
 	| maxq | mb | microblaze | mcore | mep | metag \
@@ -278,27 +290,39 @@
 	| moxie \
 	| mt \
 	| msp430 \
+	| nds32 | nds32le | nds32be \
 	| nios | nios2 \
 	| ns16k | ns32k \
+	| open8 \
 	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
 	| pyramid \
+	| rl78 | rx \
 	| score \
 	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu | strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
-	| v850 | v850e \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
 	| we32k \
-	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xc16x | xstormy16 | xtensa \
 	| z8k | z80)
 		basic_machine=$basic_machine-unknown
 		;;
-	m6811 | m68hc11 | m6812 | m68hc12)
-		# Motorola 68HC11/12.
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
@@ -308,6 +332,21 @@
 		basic_machine=mt-unknown
 		;;
 
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
 	# (2) the word "unknown" tends to confuse beginning users.
@@ -322,25 +361,29 @@
 	# Recognize the basic CPU types with company name.
 	580-* \
 	| a29k-* \
+	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
+	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
+	| le32-* | le64-* \
 	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -362,24 +405,29 @@
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
 	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
 	| pyramid-* \
-	| romp-* | rs6000-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
 	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
 	| tron-* \
-	| v850-* | v850e-* | vax-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
 	| xstormy16-* | xtensa*-* \
 	| ymp-* \
 	| z8k-* | z80-*)
@@ -404,7 +452,7 @@
 		basic_machine=a29k-amd
 		os=-udi
 		;;
-    	abacus)
+	abacus)
 		basic_machine=abacus-unknown
 		;;
 	adobe68k)
@@ -474,11 +522,20 @@
 		basic_machine=powerpc-ibm
 		os=-cnk
 		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
 		;;
-        cegcc)
+	cegcc)
 		basic_machine=arm-unknown
 		os=-cegcc
 		;;
@@ -510,7 +567,7 @@
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16)
+	cr16 | cr16-*)
 		basic_machine=cr16-unknown
 		os=-elf
 		;;
@@ -668,7 +725,6 @@
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
 		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
 	i*86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
@@ -726,6 +782,9 @@
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
+	microblaze)
+		basic_machine=microblaze-xilinx
+		;;
 	mingw32)
 		basic_machine=i386-pc
 		os=-mingw32
@@ -762,10 +821,18 @@
 	ms1-*)
 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
 		;;
+	msys)
+		basic_machine=i386-pc
+		os=-msys
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
 		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
 	ncr3000)
 		basic_machine=i486-ncr
 		os=-sysv4
@@ -830,6 +897,12 @@
 	np1)
 		basic_machine=np1-gould
 		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -912,9 +985,10 @@
 		;;
 	power)	basic_machine=power-ibm
 		;;
-	ppc)	basic_machine=powerpc-unknown
+	ppc | ppcbe)	basic_machine=powerpc-unknown
 		;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ppcle | powerpclittle | ppc-le | powerpc-little)
 		basic_machine=powerpcle-unknown
@@ -1008,6 +1082,9 @@
 		basic_machine=i860-stratus
 		os=-sysv4
 		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	sun2)
 		basic_machine=m68000-sun
 		;;
@@ -1064,20 +1141,8 @@
 		basic_machine=t90-cray
 		os=-unicos
 		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
-		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
-		;;
 	tile*)
-		basic_machine=tile-unknown
+		basic_machine=$basic_machine-unknown
 		os=-linux-gnu
 		;;
 	tx39)
@@ -1147,6 +1212,9 @@
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
 	ymp)
 		basic_machine=ymp-cray
 		os=-unicos
@@ -1244,9 +1312,12 @@
 if [ x"$os" != x"" ]
 then
 case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
+	# First match some system type aliases
+	# that might get confused with valid system types.
 	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
 	-solaris1 | -solaris1.*)
 		os=`echo $os | sed -e 's|solaris1|sunos4|'`
 		;;
@@ -1268,8 +1339,8 @@
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -kopensolaris* \
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
 	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
@@ -1281,8 +1352,9 @@
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* | -cegcc* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
@@ -1290,7 +1362,7 @@
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1329,7 +1401,7 @@
 	-opened*)
 		os=-openedition
 		;;
-        -os400*)
+	-os400*)
 		os=-os400
 		;;
 	-wince*)
@@ -1378,7 +1450,7 @@
 	-sinix*)
 		os=-sysv4
 		;;
-        -tpf*)
+	-tpf*)
 		os=-tpf
 		;;
 	-triton*)
@@ -1423,6 +1495,8 @@
 	-dicos*)
 		os=-dicos
 		;;
+	-nacl*)
+		;;
 	-none)
 		;;
 	*)
@@ -1445,10 +1519,10 @@
 # system, and we'll never get to this point.
 
 case $basic_machine in
-        score-*)
+	score-*)
 		os=-elf
 		;;
-        spu-*)
+	spu-*)
 		os=-elf
 		;;
 	*-acorn)
@@ -1460,8 +1534,17 @@
 	arm*-semi)
 		os=-aout
 		;;
-        c4x-* | tic4x-*)
-        	os=-coff
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
 		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
@@ -1481,14 +1564,11 @@
 		;;
 	m68000-sun)
 		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
 		;;
 	m68*-cisco)
 		os=-aout
 		;;
-        mep-*)
+	mep-*)
 		os=-elf
 		;;
 	mips*-cisco)
@@ -1515,7 +1595,7 @@
 	*-ibm)
 		os=-aix
 		;;
-    	*-knuth)
+	*-knuth)
 		os=-mmixware
 		;;
 	*-wec)
diff --git a/configure b/configure
index 0bd3a30..3288192 100755
--- a/configure
+++ b/configure
@@ -1,13 +1,13 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.65 for OpenFst 1.3.2.
+# Generated by GNU Autoconf 2.68 for OpenFst 1.3.3.
 #
 # Report bugs to <help@www.openfst.org>.
 #
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -91,6 +91,7 @@
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -173,6 +174,14 @@
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
   test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
 test \$(( 1 + 1 )) = 2 || exit 1"
   if (eval "$as_required") 2>/dev/null; then :
   as_have_required=yes
@@ -216,11 +225,18 @@
   # We cannot yet assume a decent shell, so we have to provide a
 	# neutralization value for shells without unset; and this also
 	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
 	BASH_ENV=/dev/null
 	ENV=/dev/null
 	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
 	export CONFIG_SHELL
-	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
 fi
 
     if test x$as_have_required = xno; then :
@@ -319,7 +335,7 @@
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 
 
 } # as_fn_mkdir_p
@@ -359,19 +375,19 @@
 fi # as_fn_arith
 
 
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
 # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
 as_fn_error ()
 {
-  as_status=$?; test $as_status -eq 0 && as_status=1
-  if test "$3"; then
-    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
   fi
-  $as_echo "$as_me: error: $1" >&2
+  $as_echo "$as_me: error: $2" >&2
   as_fn_exit $as_status
 } # as_fn_error
 
@@ -528,161 +544,14 @@
 # Sed expression to map a string onto a valid variable name.
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
-
-
-# Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$lt_ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
-  ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "$0" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<_LT_EOF
-$*
-_LT_EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
-  if test "X${echo_test_string+set}" != Xset; then
-    # find a string as large as possible, as long as the shell can cope with it
-    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-      then
-        break
-      fi
-    done
-  fi
-
-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-     test "X$echo_testing_string" = "X$echo_test_string"; then
-    :
-  else
-    # The Solaris, AIX, and Digital Unix default echo programs unquote
-    # backslashes.  This makes it impossible to quote backslashes using
-    #   echo "$something" | sed 's/\\/\\\\/g'
-    #
-    # So, first we look for a working echo in the user's PATH.
-
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for dir in $PATH /usr/ucb; do
-      IFS="$lt_save_ifs"
-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        ECHO="$dir/echo"
-        break
-      fi
-    done
-    IFS="$lt_save_ifs"
-
-    if test "X$ECHO" = Xecho; then
-      # We didn't find a better echo, so look for alternatives.
-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        # This shell has a builtin print -r that does the trick.
-        ECHO='print -r'
-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-	   test "X$CONFIG_SHELL" != X/bin/ksh; then
-        # If we have ksh, try running configure again with it.
-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-        export ORIGINAL_CONFIG_SHELL
-        CONFIG_SHELL=/bin/ksh
-        export CONFIG_SHELL
-        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-      else
-        # Try using printf.
-        ECHO='printf %s\n'
-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	  # Cool, printf works
-	  :
-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	  export CONFIG_SHELL
-	  SHELL="$CONFIG_SHELL"
-	  export SHELL
-	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
-        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
-        else
-	  # maybe with a smaller string...
-	  prev=:
-
-	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-	    then
-	      break
-	    fi
-	    prev="$cmd"
-	  done
-
-	  if test "$prev" != 'sed 50q "$0"'; then
-	    echo_test_string=`eval $prev`
-	    export echo_test_string
-	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	  else
-	    # Oops.  We lost completely, so just stick with echo.
-	    ECHO=echo
-	  fi
-        fi
-      fi
-    fi
-  fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
-fi
-
-
-
 
 test -n "$DJDIR" || exec 7<&0 </dev/null
 exec 6>&1
 
 # Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
@@ -701,8 +570,8 @@
 # Identity of this package.
 PACKAGE_NAME='OpenFst'
 PACKAGE_TARNAME='openfst'
-PACKAGE_VERSION='1.3.2'
-PACKAGE_STRING='OpenFst 1.3.2'
+PACKAGE_VERSION='1.3.3'
+PACKAGE_STRING='OpenFst 1.3.3'
 PACKAGE_BUGREPORT='help@www.openfst.org'
 PACKAGE_URL=''
 
@@ -748,11 +617,6 @@
 LTLIBOBJS
 LIBOBJS
 libfstdir
-ICU_LIBS
-ICU_CXXFLAGS
-ICU_CFLAGS
-ICU_CPPFLAGS
-ICU_CONFIG
 HAVE_PDT_FALSE
 HAVE_PDT_TRUE
 HAVE_LOOKAHEAD_FALSE
@@ -776,9 +640,11 @@
 LIPO
 NMEDIT
 DSYMUTIL
-lt_ECHO
+MANIFEST_TOOL
 RANLIB
+ac_ct_AR
 AR
+DLLTOOL
 OBJDUMP
 LN_S
 NM
@@ -807,6 +673,7 @@
 am__fastdepCXX_FALSE
 am__fastdepCXX_TRUE
 CXXDEPMODE
+am__nodep
 AMDEPBACKSLASH
 AMDEP_FALSE
 AMDEP_TRUE
@@ -890,6 +757,7 @@
 with_pic
 enable_fast_install
 with_gnu_ld
+with_sysroot
 enable_libtool_lock
 enable_bin
 enable_compact_fsts
@@ -898,7 +766,6 @@
 enable_ngram_fsts
 enable_lookahead_fsts
 enable_pdt
-with_icu
 '
       ac_precious_vars='build_alias
 host_alias
@@ -975,8 +842,9 @@
   fi
 
   case $ac_option in
-  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *)	ac_optarg=yes ;;
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
   esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
@@ -1021,7 +889,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid feature name: $ac_useropt"
+      as_fn_error $? "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1047,7 +915,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid feature name: $ac_useropt"
+      as_fn_error $? "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1251,7 +1119,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid package name: $ac_useropt"
+      as_fn_error $? "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1267,7 +1135,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      as_fn_error "invalid package name: $ac_useropt"
+      as_fn_error $? "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1297,8 +1165,8 @@
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) as_fn_error "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information."
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
     ;;
 
   *=*)
@@ -1306,7 +1174,7 @@
     # Reject names that are not valid shell variable names.
     case $ac_envvar in #(
       '' | [0-9]* | *[!_$as_cr_alnum]* )
-      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
     esac
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
@@ -1316,7 +1184,7 @@
     $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
       $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
     ;;
 
   esac
@@ -1324,13 +1192,13 @@
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  as_fn_error "missing argument to $ac_option"
+  as_fn_error $? "missing argument to $ac_option"
 fi
 
 if test -n "$ac_unrecognized_opts"; then
   case $enable_option_checking in
     no) ;;
-    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
     *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
 fi
@@ -1353,7 +1221,7 @@
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -1367,8 +1235,8 @@
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1383,9 +1251,9 @@
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  as_fn_error "working directory cannot be determined"
+  as_fn_error $? "working directory cannot be determined"
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  as_fn_error "pwd does not report name of working directory"
+  as_fn_error $? "pwd does not report name of working directory"
 
 
 # Find the source files, if location was not specified.
@@ -1424,11 +1292,11 @@
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
 	pwd)`
 # When building in place, set srcdir=.
 if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1454,7 +1322,7 @@
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures OpenFst 1.3.2 to adapt to many kinds of systems.
+\`configure' configures OpenFst 1.3.3 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1468,7 +1336,7 @@
       --help=short        display options specific to this package
       --help=recursive    display the short help of all the included packages
   -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
+  -q, --quiet, --silent   do not print \`checking ...' messages
       --cache-file=FILE   cache test results in FILE [disabled]
   -C, --config-cache      alias for \`--cache-file=config.cache'
   -n, --no-create         do not create output files
@@ -1524,7 +1392,7 @@
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of OpenFst 1.3.2:";;
+     short | recursive ) echo "Configuration of OpenFst 1.3.3:";;
    esac
   cat <<\_ACEOF
 
@@ -1550,10 +1418,11 @@
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-pic              try to use only PIC/non-PIC objects [default=use
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
                           both]
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
-  --with-icu              enable UTF8 support using the ICU Library
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
 
 Some influential environment variables:
   CXX         C++ compiler command
@@ -1634,10 +1503,10 @@
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-OpenFst configure 1.3.2
-generated by GNU Autoconf 2.65
+OpenFst configure 1.3.3
+generated by GNU Autoconf 2.68
 
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
@@ -1681,7 +1550,7 @@
 
 	ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_cxx_try_compile
@@ -1719,7 +1588,7 @@
 
 	ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_compile
@@ -1765,7 +1634,7 @@
   # interfere with the next link command; also delete a directory that is
   # left behind by Apple's compiler.  We do this before executing the actions.
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_link
@@ -1779,7 +1648,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1797,7 +1666,7 @@
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_c_check_header_compile
 
@@ -1822,7 +1691,7 @@
     mv -f conftest.er1 conftest.err
   fi
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } >/dev/null && {
+  test $ac_status = 0; } > conftest.i && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        }; then :
@@ -1833,7 +1702,7 @@
 
     ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_cpp
@@ -1875,7 +1744,7 @@
        ac_retval=$ac_status
 fi
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_c_try_run
@@ -1888,7 +1757,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -1943,7 +1812,7 @@
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_c_check_func
 
@@ -1968,7 +1837,7 @@
     mv -f conftest.er1 conftest.err
   fi
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } >/dev/null && {
+  test $ac_status = 0; } > conftest.i && {
 	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
 	 test ! -s conftest.err
        }; then :
@@ -1979,7 +1848,7 @@
 
     ac_retval=1
 fi
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_cxx_try_cpp
@@ -2025,7 +1894,7 @@
   # interfere with the next link command; also delete a directory that is
   # left behind by Apple's compiler.  We do this before executing the actions.
   rm -rf conftest.dSYM conftest_ipa8_conftest.oo
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
   as_fn_set_status $ac_retval
 
 } # ac_fn_cxx_try_link
@@ -2039,7 +1908,7 @@
   as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
 $as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${$3+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   eval "$3=no"
@@ -2080,15 +1949,15 @@
 eval ac_res=\$$3
 	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
 $as_echo "$ac_res" >&6; }
-  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
 
 } # ac_fn_cxx_check_type
 cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by OpenFst $as_me 1.3.2, which was
-generated by GNU Autoconf 2.65.  Invocation command line was
+It was created by OpenFst $as_me 1.3.3, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
 
   $ $0 $@
 
@@ -2198,11 +2067,9 @@
   {
     echo
 
-    cat <<\_ASBOX
-## ---------------- ##
+    $as_echo "## ---------------- ##
 ## Cache variables. ##
-## ---------------- ##
-_ASBOX
+## ---------------- ##"
     echo
     # The following way of writing the cache mishandles newlines in values,
 (
@@ -2236,11 +2103,9 @@
 )
     echo
 
-    cat <<\_ASBOX
-## ----------------- ##
+    $as_echo "## ----------------- ##
 ## Output variables. ##
-## ----------------- ##
-_ASBOX
+## ----------------- ##"
     echo
     for ac_var in $ac_subst_vars
     do
@@ -2253,11 +2118,9 @@
     echo
 
     if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------------- ##
+      $as_echo "## ------------------- ##
 ## File substitutions. ##
-## ------------------- ##
-_ASBOX
+## ------------------- ##"
       echo
       for ac_var in $ac_subst_files
       do
@@ -2271,11 +2134,9 @@
     fi
 
     if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
+      $as_echo "## ----------- ##
 ## confdefs.h. ##
-## ----------- ##
-_ASBOX
+## ----------- ##"
       echo
       cat confdefs.h
       echo
@@ -2330,7 +2191,12 @@
 ac_site_file1=NONE
 ac_site_file2=NONE
 if test -n "$CONFIG_SITE"; then
-  ac_site_file1=$CONFIG_SITE
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
 elif test "x$prefix" != xNONE; then
   ac_site_file1=$prefix/share/config.site
   ac_site_file2=$prefix/etc/config.site
@@ -2345,7 +2211,11 @@
     { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
 $as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
   fi
 done
 
@@ -2421,7 +2291,7 @@
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
   { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
 fi
 ## -------------------- ##
 ## Main body of script. ##
@@ -2438,16 +2308,22 @@
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  for ac_t in install-sh install.sh shtool; do
-    if test -f "$ac_dir/$ac_t"; then
-      ac_aux_dir=$ac_dir
-      ac_install_sh="$ac_aux_dir/$ac_t -c"
-      break 2
-    fi
-  done
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
 done
 if test -z "$ac_aux_dir"; then
-  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
 fi
 
 # These three variables are undocumented and unsupported,
@@ -2476,7 +2352,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
 $as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then :
+if ${ac_cv_path_install+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2563,11 +2439,11 @@
 '
 case `pwd` in
   *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
 esac
 
 # Do `set' in a subshell so we don't clobber the current shell's
@@ -2589,7 +2465,7 @@
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" "$LINENO" 5
    fi
 
@@ -2599,7 +2475,7 @@
    # Ok.
    :
 else
-   as_fn_error "newly created file is older than distributed files!
+   as_fn_error $? "newly created file is older than distributed files!
 Check your system clock" "$LINENO" 5
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -2653,7 +2529,7 @@
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
+if ${ac_cv_prog_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
@@ -2693,7 +2569,7 @@
 set dummy strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
@@ -2746,7 +2622,7 @@
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then :
+  if ${ac_cv_path_mkdir+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2797,7 +2673,7 @@
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
+if ${ac_cv_prog_AWK+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -2837,7 +2713,7 @@
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -2845,7 +2721,7 @@
 all:
 	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
 case `${MAKE-make} -f conftest.make 2>/dev/null` in
   *@@@%%%=?*=@@@%%%*)
     eval ac_cv_prog_make_${ac_make}_set=yes;;
@@ -2879,7 +2755,7 @@
   am__isrc=' -I$(srcdir)'
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
   fi
 fi
 
@@ -2895,7 +2771,7 @@
 
 # Define the identity of the package.
  PACKAGE='openfst'
- VERSION='1.3.2'
+ VERSION='1.3.3'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2925,11 +2801,11 @@
 
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
-# Always define AMTAR for backward compatibility.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
 
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
 
 
 
@@ -2952,7 +2828,7 @@
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then :
+if ${ac_cv_prog_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CXX"; then
@@ -2996,7 +2872,7 @@
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CXX"; then
@@ -3159,9 +3035,8 @@
 
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "C++ compiler cannot create executables
-See \`config.log' for more details." "$LINENO" 5; }; }
+as_fn_error 77 "C++ compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
@@ -3203,8 +3078,8 @@
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest conftest$ac_cv_exeext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3261,9 +3136,9 @@
     else
 	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run C++ compiled programs.
+as_fn_error $? "cannot run C++ compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5; }
     fi
   fi
 fi
@@ -3274,7 +3149,7 @@
 ac_clean_files=$ac_clean_files_save
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
 $as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then :
+if ${ac_cv_objext+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -3314,8 +3189,8 @@
 
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
@@ -3325,7 +3200,7 @@
 ac_objext=$OBJEXT
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -3362,7 +3237,7 @@
 ac_save_CXXFLAGS=$CXXFLAGS
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
 $as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then :
+if ${ac_cv_prog_cxx_g+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_cxx_werror_flag=$ac_cxx_werror_flag
@@ -3495,6 +3370,7 @@
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
+  am__nodep='_no'
 fi
  if test "x$enable_dependency_tracking" != xno; then
   AMDEP_TRUE=
@@ -3510,7 +3386,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then :
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -3519,6 +3395,7 @@
   # instance it was reported that on HP-UX the gcc test will end up
   # making a dummy file named `D' -- because `-MD' means `put the output
   # in D'.
+  rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.
@@ -3578,7 +3455,7 @@
 	break
       fi
       ;;
-    msvisualcpp | msvcmsys)
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
       # This compiler won't grok `-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
@@ -3672,8 +3549,8 @@
 
 
 
-macro_version='2.2.6b'
-macro_revision='1.3017'
+macro_version='2.4.2'
+macro_revision='1.3337'
 
 
 
@@ -3691,27 +3568,27 @@
 
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
 $as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then :
+if ${ac_cv_build+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_build_alias=$build_alias
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
 
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -3729,14 +3606,14 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
 $as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then :
+if ${ac_cv_host+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$host_alias" = x; then
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
 fi
 
 fi
@@ -3744,7 +3621,7 @@
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -3760,6 +3637,75 @@
 case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3770,7 +3716,7 @@
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3810,7 +3756,7 @@
 set dummy gcc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3863,7 +3809,7 @@
 set dummy ${ac_tool_prefix}cc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3903,7 +3849,7 @@
 set dummy cc; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3962,7 +3908,7 @@
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
+if ${ac_cv_prog_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -4006,7 +3952,7 @@
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -4060,8 +4006,8 @@
 
 test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "no acceptable C compiler found in \$PATH
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
 
 # Provide some information about the compiler.
 $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -4090,7 +4036,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+if ${ac_cv_c_compiler_gnu+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -4127,7 +4073,7 @@
 ac_save_CFLAGS=$CFLAGS
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
 $as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then :
+if ${ac_cv_prog_cc_g+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
@@ -4205,7 +4151,7 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
+if ${ac_cv_prog_cc_c89+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
@@ -4304,7 +4250,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -4313,6 +4259,7 @@
   # instance it was reported that on HP-UX the gcc test will end up
   # making a dummy file named `D' -- because `-MD' means `put the output
   # in D'.
+  rm -rf conftest.dir
   mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.
@@ -4372,7 +4319,7 @@
 	break
       fi
       ;;
-    msvisualcpp | msvcmsys)
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
       # This compiler won't grok `-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.
@@ -4429,7 +4376,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
 $as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${ac_cv_path_SED+set}" = set; then :
+if ${ac_cv_path_SED+:} false; then :
   $as_echo_n "(cached) " >&6
 else
             ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
@@ -4484,7 +4431,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_SED"; then
-    as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
   fi
 else
   ac_cv_path_SED=$SED
@@ -4511,7 +4458,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
 $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
+if ${ac_cv_path_GREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$GREP"; then
@@ -4560,7 +4507,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_GREP"; then
-    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_GREP=$GREP
@@ -4574,7 +4521,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
 $as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then :
+if ${ac_cv_path_EGREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -4626,7 +4573,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_EGREP"; then
-    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_EGREP=$EGREP
@@ -4641,7 +4588,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
 $as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then :
+if ${ac_cv_path_FGREP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
@@ -4693,7 +4640,7 @@
   done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_FGREP"; then
-    as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_FGREP=$FGREP
@@ -4772,7 +4719,7 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
 $as_echo_n "checking for non-GNU ld... " >&6; }
 fi
-if test "${lt_cv_path_LD+set}" = set; then :
+if ${lt_cv_path_LD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
@@ -4809,10 +4756,10 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+if ${lt_cv_prog_gnu_ld+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # I'd rather use --version here, but apparently some GNU lds only accept -v.
@@ -4839,7 +4786,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
 $as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then :
+if ${lt_cv_path_NM+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NM"; then
@@ -4892,14 +4839,17 @@
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$ac_tool_prefix"; then
-  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_DUMPBIN+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$DUMPBIN"; then
@@ -4937,13 +4887,13 @@
 fi
 if test -z "$DUMPBIN"; then
   ac_ct_DUMPBIN=$DUMPBIN
-  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+  for ac_prog in dumpbin "link -dump"
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_DUMPBIN"; then
@@ -4992,6 +4942,15 @@
   fi
 fi
 
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
 
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
@@ -5006,18 +4965,18 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
 $as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if test "${lt_cv_nm_interface+set}" = set; then :
+if ${lt_cv_nm_interface+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:5014: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:5017: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:5020: output\"" >&5)
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -5041,7 +5000,7 @@
 # find the maximum length of command line arguments
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
 $as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+if ${lt_cv_sys_max_cmd_len+:} false; then :
   $as_echo_n "(cached) " >&6
 else
     i=0
@@ -5074,6 +5033,11 @@
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
@@ -5099,6 +5063,11 @@
     lt_cv_sys_max_cmd_len=196608
     ;;
 
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
   osf*)
     # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
     # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
@@ -5138,8 +5107,8 @@
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
@@ -5181,8 +5150,8 @@
 # Try some XSI features
 xsi_shell=no
 ( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
@@ -5231,9 +5200,83 @@
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
 $as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then :
+if ${lt_cv_ld_reload_flag+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_ld_reload_flag='-r'
@@ -5247,6 +5290,11 @@
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
   darwin*)
     if test "$GCC" = yes; then
       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -5269,7 +5317,7 @@
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_OBJDUMP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OBJDUMP"; then
@@ -5309,7 +5357,7 @@
 set dummy objdump; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OBJDUMP"; then
@@ -5368,7 +5416,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
 $as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then :
+if ${lt_cv_deplibs_check_method+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_file_magic_cmd='$MAGIC_CMD'
@@ -5410,16 +5458,18 @@
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
 
-cegcc)
+cegcc*)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -5449,6 +5499,10 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
@@ -5457,11 +5511,11 @@
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
@@ -5482,7 +5536,7 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-# This must be Linux ELF.
+# This must be glibc/ELF.
 linux* | k*bsd*-gnu | kopensolaris*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
@@ -5564,6 +5618,21 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
 $as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -5579,12 +5648,166 @@
 
 
 
+
+
+
+
+
+
+
+
+
+
 if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then :
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AR"; then
@@ -5597,7 +5820,7 @@
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -5617,14 +5840,18 @@
 fi
 
 
+    test -n "$AR" && break
+  done
 fi
-if test -z "$ac_cv_prog_AR"; then
+if test -z "$AR"; then
   ac_ct_AR=$AR
-  # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_AR"; then
@@ -5637,7 +5864,7 @@
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AR="ar"
+    ac_cv_prog_ac_ct_AR="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
@@ -5656,6 +5883,10 @@
 $as_echo "no" >&6; }
 fi
 
+
+  test -n "$ac_ct_AR" && break
+done
+
   if test "x$ac_ct_AR" = x; then
     AR="false"
   else
@@ -5667,12 +5898,10 @@
 esac
     AR=$ac_ct_AR
   fi
-else
-  AR="$ac_cv_prog_AR"
 fi
 
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
+: ${AR=ar}
+: ${AR_FLAGS=cru}
 
 
 
@@ -5684,12 +5913,70 @@
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then :
+if ${ac_cv_prog_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$STRIP"; then
@@ -5729,7 +6016,7 @@
 set dummy strip; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_STRIP"; then
@@ -5788,7 +6075,7 @@
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then :
+if ${ac_cv_prog_RANLIB+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$RANLIB"; then
@@ -5828,7 +6115,7 @@
 set dummy ranlib; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_RANLIB"; then
@@ -5890,15 +6177,27 @@
 if test -n "$RANLIB"; then
   case $host_os in
   openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
     ;;
   esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
 fi
 
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
 
 
 
@@ -5945,7 +6244,7 @@
 # Check for command to grab the raw symbol name followed by C symbol from nm.
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
   $as_echo_n "(cached) " >&6
 else
 
@@ -6006,8 +6305,8 @@
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -6031,6 +6330,7 @@
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
 "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
@@ -6043,6 +6343,7 @@
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -6068,8 +6369,8 @@
   test $ac_status = 0; }; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; } && test -s "$nlist"; then
@@ -6084,6 +6385,18 @@
       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -6095,7 +6408,7 @@
 	  cat <<_LT_EOF >> conftest.$ac_ext
 
 /* The mapping between symbol names and symbols.  */
-const struct {
+LT_DLSYM_CONST struct {
   const char *name;
   void       *address;
 }
@@ -6121,8 +6434,8 @@
 _LT_EOF
 	  # Now try linking the two files.
 	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
 	  LIBS="conftstm.$ac_objext"
 	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
 	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
@@ -6132,8 +6445,8 @@
   test $ac_status = 0; } && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
 	else
 	  echo "cannot find nm_test_func in $nlist" >&5
 	fi
@@ -6170,6 +6483,12 @@
 $as_echo "ok" >&6; }
 fi
 
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
 
 
 
@@ -6192,6 +6511,48 @@
 
 
 
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
 # Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then :
   enableval=$enable_libtool_lock;
@@ -6223,7 +6584,7 @@
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 6226 "configure"' > conftest.$ac_ext
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -6317,7 +6678,7 @@
   CFLAGS="$CFLAGS -belf"
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
 $as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then :
+if ${lt_cv_cc_needs_belf+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_ext=c
@@ -6358,7 +6719,7 @@
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
-sparc*-*solaris*)
+*-*solaris*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
@@ -6369,7 +6730,20 @@
     case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
       *)
 	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
@@ -6385,6 +6759,123 @@
 
 need_locks="$enable_libtool_lock"
 
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
 
   case $host_os in
     rhapsody* | darwin*)
@@ -6393,7 +6884,7 @@
 set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$DSYMUTIL"; then
@@ -6433,7 +6924,7 @@
 set dummy dsymutil; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_DSYMUTIL"; then
@@ -6485,7 +6976,7 @@
 set dummy ${ac_tool_prefix}nmedit; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_NMEDIT+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$NMEDIT"; then
@@ -6525,7 +7016,7 @@
 set dummy nmedit; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_NMEDIT"; then
@@ -6577,7 +7068,7 @@
 set dummy ${ac_tool_prefix}lipo; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LIPO+set}" = set; then :
+if ${ac_cv_prog_LIPO+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$LIPO"; then
@@ -6617,7 +7108,7 @@
 set dummy lipo; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_LIPO"; then
@@ -6669,7 +7160,7 @@
 set dummy ${ac_tool_prefix}otool; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL+set}" = set; then :
+if ${ac_cv_prog_OTOOL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OTOOL"; then
@@ -6709,7 +7200,7 @@
 set dummy otool; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OTOOL"; then
@@ -6761,7 +7252,7 @@
 set dummy ${ac_tool_prefix}otool64; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_OTOOL64+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$OTOOL64"; then
@@ -6801,7 +7292,7 @@
 set dummy otool64; ac_word=$2
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_OTOOL64"; then
@@ -6876,7 +7367,7 @@
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
 $as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+if ${lt_cv_apple_cc_single_mod+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_apple_cc_single_mod=no
@@ -6892,7 +7383,13 @@
 	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
 	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
         _lt_result=$?
-	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&5
@@ -6903,9 +7400,10 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
 $as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_ld_exported_symbols_list=no
@@ -6935,6 +7433,41 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -6962,7 +7495,7 @@
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-    if test "$DSYMUTIL" != ":"; then
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -6982,7 +7515,7 @@
   CPP=
 fi
 if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then :
+  if ${ac_cv_prog_CPP+:} false; then :
   $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
@@ -7012,7 +7545,7 @@
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -7028,11 +7561,11 @@
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
   break
 fi
@@ -7071,7 +7604,7 @@
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -7087,18 +7620,18 @@
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
 
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." "$LINENO" 5; }
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
 fi
 
 ac_ext=c
@@ -7110,7 +7643,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then :
+if ${ac_cv_header_stdc+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
@@ -7227,8 +7760,7 @@
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
 "
-eval as_val=\$$as_ac_Header
-   if test "x$as_val" = x""yes; then :
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -7242,7 +7774,7 @@
 do :
   ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
 "
-if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_DLFCN_H 1
 _ACEOF
@@ -7253,528 +7785,14 @@
 
 
 
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -z "$CXX"; then
-  if test -n "$CCC"; then
-    CXX=$CCC
-  else
-    if test -n "$ac_tool_prefix"; then
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$CXX"; then
-  ac_cv_prog_CXX="$CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
 
-fi
-fi
-CXX=$ac_cv_prog_CXX
-if test -n "$CXX"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
-$as_echo "$CXX" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-    test -n "$CXX" && break
-  done
-fi
-if test -z "$CXX"; then
-  ac_ct_CXX=$CXX
-  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_CXX"; then
-  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_CXX="$ac_prog"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
-if test -n "$ac_ct_CXX"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
-$as_echo "$ac_ct_CXX" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  test -n "$ac_ct_CXX" && break
-done
-
-  if test "x$ac_ct_CXX" = x; then
-    CXX="g++"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    CXX=$ac_ct_CXX
-  fi
-fi
-
-  fi
-fi
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
-  { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
-  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
-  ac_status=$?
-  if test -s conftest.err; then
-    sed '10a\
-... rest of stderr output deleted ...
-         10q' conftest.err >conftest.er1
-    cat conftest.er1 >&5
-  fi
-  rm -f conftest.er1 conftest.err
-  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
-$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
+func_stripname_cnf ()
 {
-#ifndef __GNUC__
-       choke me
-#endif
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-  ac_compiler_gnu=yes
-else
-  ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
-$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
-  GXX=yes
-else
-  GXX=
-fi
-ac_test_CXXFLAGS=${CXXFLAGS+set}
-ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
-$as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
-   ac_cxx_werror_flag=yes
-   ac_cv_prog_cxx_g=no
-   CXXFLAGS="-g"
-   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-  ac_cv_prog_cxx_g=yes
-else
-  CXXFLAGS=""
-      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-
-else
-  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-	 CXXFLAGS="-g"
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
-  ac_cv_prog_cxx_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
-$as_echo "$ac_cv_prog_cxx_g" >&6; }
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CXX"  am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CXX_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  am__universal=false
-  case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvisualcpp | msvcmsys)
-      # This compiler won't grok `-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CXX_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CXX_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
-CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
- if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
-  am__fastdepCXX_TRUE=
-  am__fastdepCXX_FALSE='#'
-else
-  am__fastdepCXX_TRUE='#'
-  am__fastdepCXX_FALSE=
-fi
-
-
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
-$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
-if test -z "$CXXCPP"; then
-  if test "${ac_cv_prog_CXXCPP+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CXXCPP needs to be expanded
-    for CXXCPP in "$CXX -E" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-  break
-fi
-
-    done
-    ac_cv_prog_CXXCPP=$CXXCPP
-
-fi
-  CXXCPP=$ac_cv_prog_CXXCPP
-else
-  ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
-$as_echo "$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
-
-else
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
-  # Broken: success on invalid input.
-continue
-else
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
-  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-_lt_caught_CXX_error=yes; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-else
-  _lt_caught_CXX_error=yes
-fi
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
 
 
 
@@ -7825,7 +7843,22 @@
 
 # Check whether --with-pic was given.
 if test "${with_pic+set}" = set; then :
-  withval=$with_pic; pic_mode="$withval"
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
   pic_mode=default
 fi
@@ -7902,6 +7935,11 @@
 
 
 
+
+
+
+
+
 test -z "$LN_S" && LN_S="ln -s"
 
 
@@ -7923,7 +7961,7 @@
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
 $as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then :
+if ${lt_cv_objdir+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   rm -f .libs 2>/dev/null
@@ -7951,19 +7989,6 @@
 
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
 case $host_os in
 aix3*)
   # AIX sometimes has problems with the GCC collect2 program.  For some
@@ -7976,23 +8001,6 @@
   ;;
 esac
 
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
 # Global variables:
 ofile=libtool
 can_build_shared=yes
@@ -8021,7 +8029,7 @@
     *) break;;
   esac
 done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
 
 
 # Only perform the check for file, if the check method requires it
@@ -8031,7 +8039,7 @@
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
 $as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
@@ -8097,7 +8105,7 @@
   if test -n "$ac_tool_prefix"; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
 $as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   case $MAGIC_CMD in
@@ -8230,11 +8238,16 @@
 lt_prog_compiler_no_builtin_flag=
 
 if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_rtti_exceptions=no
@@ -8250,15 +8263,15 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8253: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8257: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
@@ -8287,8 +8300,6 @@
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl='-Wl,'
@@ -8336,6 +8347,12 @@
       lt_prog_compiler_pic='-fno-common'
       ;;
 
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
@@ -8378,6 +8395,15 @@
       lt_prog_compiler_pic='-fPIC'
       ;;
     esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
@@ -8440,7 +8466,13 @@
 	lt_prog_compiler_pic='--shared'
 	lt_prog_compiler_static='--static'
 	;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
 	lt_prog_compiler_wl='-Wl,'
@@ -8452,25 +8484,40 @@
         # All Alpha code is PIC.
         lt_prog_compiler_static='-non_shared'
         ;;
-      xl*)
-	# IBM XL C 8.0/Fortran 10.1 on PPC
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-qpic'
 	lt_prog_compiler_static='-qstaticlink'
 	;;
       *)
 	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
 	*Sun\ C*)
 	  # Sun C 5.9
 	  lt_prog_compiler_pic='-KPIC'
 	  lt_prog_compiler_static='-Bstatic'
 	  lt_prog_compiler_wl='-Wl,'
 	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic='-KPIC'
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
 	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl=''
 	  ;;
 	esac
 	;;
@@ -8502,7 +8549,7 @@
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95*)
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
 	lt_prog_compiler_wl='-Qoption ld ';;
       *)
 	lt_prog_compiler_wl='-Wl,';;
@@ -8559,13 +8606,17 @@
     lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
     ;;
 esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
 
-
-
-
-
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
 
 #
 # Check to make sure the PIC flag actually works.
@@ -8573,7 +8624,7 @@
 if test -n "$lt_prog_compiler_pic"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_pic_works=no
@@ -8589,15 +8640,15 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8592: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:8596: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_pic_works=yes
@@ -8626,13 +8677,18 @@
 
 
 
+
+
+
+
+
 #
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+if ${lt_cv_prog_compiler_static_works+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works=no
@@ -8645,7 +8701,7 @@
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&5
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          lt_cv_prog_compiler_static_works=yes
@@ -8675,7 +8731,7 @@
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
@@ -8694,16 +8750,16 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8697: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8701: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
@@ -8730,7 +8786,7 @@
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o=no
@@ -8749,16 +8805,16 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8752: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:8756: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
@@ -8824,7 +8880,6 @@
   hardcode_direct=no
   hardcode_direct_absolute=no
   hardcode_libdir_flag_spec=
-  hardcode_libdir_flag_spec_ld=
   hardcode_libdir_separator=
   hardcode_minus_L=no
   hardcode_shlibpath_var=unsupported
@@ -8868,13 +8923,39 @@
   openbsd*)
     with_gnu_ld=no
     ;;
-  linux* | k*bsd*-gnu)
+  linux* | k*bsd*-gnu | gnu*)
     link_all_deplibs=no
     ;;
   esac
 
   ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
@@ -8908,11 +8989,12 @@
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
 
 _LT_EOF
       fi
@@ -8948,10 +9030,12 @@
       # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -8969,6 +9053,11 @@
       fi
       ;;
 
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
     interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
@@ -8994,15 +9083,16 @@
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
 	 && test "$tmp_diet" = no
       then
-	tmp_addflag=
+	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -9013,13 +9103,17 @@
 	lf95*)				# Lahey Fortran 8.1
 	  whole_archive_flag_spec=
 	  tmp_sharedflag='--shared' ;;
-	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  compiler_needs_object=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
@@ -9035,17 +9129,16 @@
         fi
 
 	case $cc_basename in
-	xlf*)
+	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
-	  hardcode_libdir_flag_spec=
-	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
-	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -9059,8 +9152,8 @@
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -9078,8 +9171,8 @@
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -9125,8 +9218,8 @@
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	ld_shlibs=no
       fi
@@ -9166,8 +9259,10 @@
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
 	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
@@ -9255,7 +9350,13 @@
 	allow_undefined_flag='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -9268,25 +9369,32 @@
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
 
         hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
@@ -9295,7 +9403,13 @@
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -9308,30 +9422,42 @@
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
 
 	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag=' ${wl}-bernotok'
 	  allow_undefined_flag=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec='$convenience'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
 	  archive_cmds_need_lc=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
 	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -9363,20 +9489,64 @@
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      allow_undefined_flag=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_from_new_cmds='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes=yes
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -9386,7 +9556,12 @@
   hardcode_direct=no
   hardcode_automatic=yes
   hardcode_shlibpath_var=unsupported
-  whole_archive_flag_spec=''
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
   link_all_deplibs=yes
   allow_undefined_flag="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -9394,7 +9569,7 @@
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
+    output_verbose_link_cmd=func_echo_all
     archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -9412,10 +9587,6 @@
       hardcode_shlibpath_var=no
       ;;
 
-    freebsd1*)
-      ld_shlibs=no
-      ;;
-
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
     # support.  Future versions do this automatically, but an explicit c++rt0.o
     # does not break anything, and helps significantly (at the cost of a little
@@ -9428,7 +9599,7 @@
       ;;
 
     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
+    freebsd2.*)
       archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       hardcode_direct=yes
       hardcode_minus_L=yes
@@ -9437,7 +9608,7 @@
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
     freebsd* | dragonfly*)
-      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
       hardcode_shlibpath_var=no
@@ -9445,7 +9616,7 @@
 
     hpux9*)
       if test "$GCC" = yes; then
-	archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
 	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
@@ -9460,14 +9631,13 @@
       ;;
 
     hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
       if test "$with_gnu_ld" = no; then
 	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_flag_spec_ld='+b $libdir'
 	hardcode_libdir_separator=:
 	hardcode_direct=yes
 	hardcode_direct_absolute=yes
@@ -9479,16 +9649,16 @@
       ;;
 
     hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
@@ -9500,7 +9670,46 @@
 	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
 	  ;;
 	esac
       fi
@@ -9528,26 +9737,39 @@
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-int foo(void) {}
+int foo (void) { return 0; }
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
-  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-        LDFLAGS="$save_LDFLAGS"
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -9609,17 +9831,17 @@
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -9629,13 +9851,13 @@
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -9648,9 +9870,9 @@
       no_undefined_flag=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
@@ -9838,44 +10060,50 @@
       # to ld, don't add -lc before -lgcc.
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl
-	pic_flag=$lt_prog_compiler_pic
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag
-        allow_undefined_flag=
-        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
   (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-        then
-	  archive_cmds_need_lc=no
-        else
-	  archive_cmds_need_lc=yes
-        fi
-        allow_undefined_flag=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
-$as_echo "$archive_cmds_need_lc" >&6; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
       ;;
     esac
   fi
@@ -10033,11 +10261,6 @@
 
 
 
-
-
-
-
-
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
 $as_echo_n "checking dynamic linker characteristics... " >&6; }
 
@@ -10046,16 +10269,23 @@
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
   lt_tmp_lt_search_path_spec=
@@ -10068,7 +10298,7 @@
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -10088,7 +10318,13 @@
   if (lt_foo != "") { lt_freq[lt_foo]++; }
   if (lt_freq[lt_foo] == 1) { print lt_foo; }
 }'`
-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi
@@ -10114,7 +10350,7 @@
 
 case $host_os in
 aix3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
@@ -10123,7 +10359,7 @@
   ;;
 
 aix[4-9]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
@@ -10176,7 +10412,7 @@
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -10188,7 +10424,7 @@
   ;;
 
 bsdi[45]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -10207,8 +10443,9 @@
   need_version=no
   need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
@@ -10229,36 +10466,83 @@
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
     ;;
 
   *)
+    # Assume MSVC wrapper
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
     ;;
   esac
-  dynamic_linker='Win32 ld.exe'
   # FIXME: first we should search . and the directory the executable is in
   shlibpath_var=PATH
   ;;
@@ -10279,7 +10563,7 @@
   ;;
 
 dgux*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
@@ -10287,10 +10571,6 @@
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -10298,7 +10578,7 @@
     objformat=`/usr/bin/objformat`
   else
     case $host_os in
-    freebsd[123]*) objformat=aout ;;
+    freebsd[23].*) objformat=aout ;;
     *) objformat=elf ;;
     esac
   fi
@@ -10316,7 +10596,7 @@
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
-  freebsd2*)
+  freebsd2.*)
     shlibpath_overrides_runpath=yes
     ;;
   freebsd3.[01]* | freebsdelf3.[01]*)
@@ -10336,12 +10616,26 @@
   ;;
 
 gnu*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
 
@@ -10387,12 +10681,14 @@
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
   postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
   ;;
 
 interix[3-9]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
@@ -10408,7 +10704,7 @@
     nonstopux*) version_type=nonstopux ;;
     *)
 	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
+		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
 	fi ;;
@@ -10445,9 +10741,9 @@
   dynamic_linker=no
   ;;
 
-# This must be Linux ELF.
+# This must be glibc/ELF.
 linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -10455,12 +10751,17 @@
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+
   # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -10473,13 +10774,17 @@
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
   if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
-  shlibpath_overrides_runpath=yes
+  lt_cv_shlibpath_overrides_runpath=yes
 fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
@@ -10488,7 +10793,7 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -10532,7 +10837,7 @@
   ;;
 
 newsos6)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
@@ -10601,7 +10906,7 @@
   ;;
 
 solaris*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -10626,7 +10931,7 @@
   ;;
 
 sysv4 | sysv4.3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -10650,7 +10955,7 @@
 
 sysv4*MP*)
   if test -d /usr/nec ;then
-    version_type=linux
+    version_type=linux # correct to gnu/linux during the next big refactor
     library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
     soname_spec='$libname${shared_ext}.$major'
     shlibpath_var=LD_LIBRARY_PATH
@@ -10681,7 +10986,7 @@
 
 tpf*)
   # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -10691,7 +10996,7 @@
   ;;
 
 uts4*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -10803,6 +11108,11 @@
 
 
 
+
+
+
+
+
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
 $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
@@ -10875,7 +11185,7 @@
   # if libdl is installed we need to link against it
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10909,7 +11219,7 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
 
@@ -10923,12 +11233,12 @@
 
   *)
     ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
-if test "x$ac_cv_func_shl_load" = x""yes; then :
+if test "x$ac_cv_func_shl_load" = xyes; then :
   lt_cv_dlopen="shl_load"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
 $as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+if ${ac_cv_lib_dld_shl_load+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -10962,16 +11272,16 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
 $as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
   lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
   ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
-if test "x$ac_cv_func_dlopen" = x""yes; then :
+if test "x$ac_cv_func_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
 $as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+if ${ac_cv_lib_dl_dlopen+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -11005,12 +11315,12 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
 $as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
 $as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+if ${ac_cv_lib_svld_dlopen+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -11044,12 +11354,12 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
 $as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
 $as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+if ${ac_cv_lib_dld_dld_link+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
@@ -11083,7 +11393,7 @@
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
 $as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
   lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 fi
 
@@ -11124,7 +11434,7 @@
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
 $as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then :
+if ${lt_cv_dlopen_self+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
@@ -11133,7 +11443,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11136 "configure"
+#line $LINENO "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11174,7 +11484,13 @@
 #  endif
 #endif
 
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -11183,7 +11499,11 @@
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
       /* dlclose (self); */
     }
   else
@@ -11220,7 +11540,7 @@
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then :
+if ${lt_cv_dlopen_self_static+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   	  if test "$cross_compiling" = yes; then :
@@ -11229,7 +11549,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11232 "configure"
+#line $LINENO "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11270,7 +11590,13 @@
 #  endif
 #endif
 
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -11279,7 +11605,11 @@
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
       /* dlclose (self); */
     }
   else
@@ -11436,6 +11766,145 @@
 
 CC="$lt_save_CC"
 
+      if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if ${ac_cv_prog_CXXCPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+else
+  _lt_caught_CXX_error=yes
+fi
 
 ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
@@ -11452,7 +11921,6 @@
 hardcode_direct_CXX=no
 hardcode_direct_absolute_CXX=no
 hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_flag_spec_ld_CXX=
 hardcode_libdir_separator_CXX=
 hardcode_minus_L_CXX=no
 hardcode_shlibpath_var_CXX=unsupported
@@ -11462,6 +11930,8 @@
 module_expsym_cmds_CXX=
 link_all_deplibs_CXX=unknown
 old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
 no_undefined_flag_CXX=
 whole_archive_flag_spec_CXX=
 enable_shared_with_static_runtimes_CXX=no
@@ -11517,6 +11987,7 @@
 
   # Allow CC to be a program name with arguments.
   lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
   lt_save_LD=$LD
   lt_save_GCC=$GCC
   GCC=$GXX
@@ -11534,6 +12005,7 @@
   fi
   test -z "${LDCXX+set}" || LD=$LDCXX
   CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
   compiler=$CC
   compiler_CXX=$CC
   for cc_temp in $compiler""; do
@@ -11544,7 +12016,7 @@
     *) break;;
   esac
 done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
 
 
   if test -n "$compiler"; then
@@ -11607,7 +12079,7 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
 $as_echo_n "checking for non-GNU ld... " >&6; }
 fi
-if test "${lt_cv_path_LD+set}" = set; then :
+if ${lt_cv_path_LD+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$LD"; then
@@ -11644,10 +12116,10 @@
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
-test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+if ${lt_cv_prog_gnu_ld+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   # I'd rather use --version here, but apparently some GNU lds only accept -v.
@@ -11673,8 +12145,8 @@
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
       if test "$with_gnu_ld" = yes; then
-        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 
         hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
         export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
@@ -11706,7 +12178,7 @@
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
       # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
     else
       GXX=no
@@ -11816,7 +12288,13 @@
           allow_undefined_flag_CXX='-berok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
-          cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+          if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -11829,26 +12307,33 @@
 _ACEOF
 if ac_fn_cxx_try_link "$LINENO"; then :
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
 
           hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
         else
           if test "$host_cpu" = ia64; then
 	    hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
@@ -11857,7 +12342,13 @@
           else
 	    # Determine the default libpath from the value encoded in an
 	    # empty executable.
-	    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+	    if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -11870,30 +12361,42 @@
 _ACEOF
 if ac_fn_cxx_try_link "$LINENO"; then :
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
 
 	    hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 	    # Warning - without using the other run time loading flags,
 	    # -berok will link without error, but may produce a broken library.
 	    no_undefined_flag_CXX=' ${wl}-bernotok'
 	    allow_undefined_flag_CXX=' ${wl}-berok'
-	    # Exported symbols can be pulled into shared objects from archives
-	    whole_archive_flag_spec_CXX='$convenience'
+	    if test "$with_gnu_ld" = yes; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      whole_archive_flag_spec_CXX='$convenience'
+	    fi
 	    archive_cmds_need_lc_CXX=yes
 	    # This is similar to how AIX traditionally builds its shared
 	    # libraries.
@@ -11923,28 +12426,75 @@
         ;;
 
       cygwin* | mingw* | pw32* | cegcc*)
-        # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-        # as there is no search path for DLLs.
-        hardcode_libdir_flag_spec_CXX='-L$libdir'
-        allow_undefined_flag_CXX=unsupported
-        always_export_symbols_CXX=no
-        enable_shared_with_static_runtimes_CXX=yes
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX=' '
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=yes
+	  file_list_spec_CXX='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=".dll"
+	  # FIXME: Setting linknames here is a bad hack.
+	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	  archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	    else
+	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	    fi~
+	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	    linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+	  enable_shared_with_static_runtimes_CXX=yes
+	  # Don't use ranlib
+	  old_postinstall_cmds_CXX='chmod 644 $oldlib'
+	  postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+	    lt_tool_outputfile="@TOOL_OUTPUT@"~
+	    case $lt_outputfile in
+	      *.exe|*.EXE) ;;
+	      *)
+		lt_outputfile="$lt_outputfile.exe"
+		lt_tool_outputfile="$lt_tool_outputfile.exe"
+		;;
+	    esac~
+	    func_to_tool_file "$lt_outputfile"~
+	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	      $RM "$lt_outputfile.manifest";
+	    fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=no
+	  enable_shared_with_static_runtimes_CXX=yes
 
-        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-          archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-          # If the export-symbols file already is a .def file (1st line
-          # is EXPORTS), use it as is; otherwise, prepend...
-          archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    cp $export_symbols $output_objdir/$soname.def;
-          else
-	    echo EXPORTS > $output_objdir/$soname.def;
-	    cat $export_symbols >> $output_objdir/$soname.def;
-          fi~
-          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-        else
-          ld_shlibs_CXX=no
-        fi
-        ;;
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file (1st line
+	    # is EXPORTS), use it as is; otherwise, prepend...
+	    archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      cp $export_symbols $output_objdir/$soname.def;
+	    else
+	      echo EXPORTS > $output_objdir/$soname.def;
+	      cat $export_symbols >> $output_objdir/$soname.def;
+	    fi~
+	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    ld_shlibs_CXX=no
+	  fi
+	  ;;
+	esac
+	;;
       darwin* | rhapsody*)
 
 
@@ -11952,7 +12502,12 @@
   hardcode_direct_CXX=no
   hardcode_automatic_CXX=yes
   hardcode_shlibpath_var_CXX=unsupported
-  whole_archive_flag_spec_CXX=''
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec_CXX=''
+  fi
   link_all_deplibs_CXX=yes
   allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -11960,7 +12515,7 @@
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
+    output_verbose_link_cmd=func_echo_all
     archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -11994,7 +12549,7 @@
         esac
         ;;
 
-      freebsd[12]*)
+      freebsd2.*)
         # C++ shared libraries reported to be fairly broken before
 	# switch to ELF
         ld_shlibs_CXX=no
@@ -12013,6 +12568,11 @@
       gnu*)
         ;;
 
+      haiku*)
+        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        link_all_deplibs_CXX=yes
+        ;;
+
       hpux9*)
         hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
         hardcode_libdir_separator_CXX=:
@@ -12037,11 +12597,11 @@
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
             if test "$GXX" = yes; then
-              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               ld_shlibs_CXX=no
@@ -12102,7 +12662,7 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
 	    if test "$GXX" = yes; then
@@ -12112,10 +12672,10 @@
 	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          ia64*)
-	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          *)
-	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	        esac
 	      fi
@@ -12145,7 +12705,7 @@
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -12156,9 +12716,9 @@
           *)
 	    if test "$GXX" = yes; then
 	      if test "$with_gnu_ld" = no; then
-	        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	      else
-	        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
 	      fi
 	    fi
 	    link_all_deplibs_CXX=yes
@@ -12187,7 +12747,7 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 
 	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
 	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
@@ -12224,26 +12784,26 @@
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
-	    *pgCC\ [1-5]* | *pgcpp\ [1-5]*)
+	    *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
 	      prelink_cmds_CXX='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
 	      old_archive_cmds_CXX='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
 		$RANLIB $oldlib'
 	      archive_cmds_CXX='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      archive_expsym_cmds_CXX='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
-	    *) # Version 6 will use weak symbols
+	    *) # Version 6 and above use weak symbols
 	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
@@ -12251,7 +12811,7 @@
 
 	    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
 	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
@@ -12270,9 +12830,9 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
 	    ;;
-	  xl*)
+	  xl* | mpixl* | bgxl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
 	    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
@@ -12292,13 +12852,13 @@
 	      archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
 	      hardcode_libdir_flag_spec_CXX='-R$libdir'
-	      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	      compiler_needs_object_CXX=yes
 
 	      # Not sure whether something based on
 	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
 	      # would be better.
-	      output_verbose_link_cmd='echo'
+	      output_verbose_link_cmd='func_echo_all'
 
 	      # Archives containing C++ object files must be created using
 	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -12367,7 +12927,7 @@
 	    export_dynamic_flag_spec_CXX='${wl}-E'
 	    whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
 	  fi
-	  output_verbose_link_cmd=echo
+	  output_verbose_link_cmd=func_echo_all
 	else
 	  ld_shlibs_CXX=no
 	fi
@@ -12402,15 +12962,15 @@
 	    case $host in
 	      osf3*)
 	        allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
 		;;
 	      *)
 	        allow_undefined_flag_CXX=' -expect_unresolved \*'
-	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
 	          $RM $lib.exp'
 	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
 		;;
@@ -12426,17 +12986,17 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
 	  *)
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
 	      case $host in
 	        osf3*)
-	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	        *)
-	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	      esac
 
@@ -12446,7 +13006,7 @@
 	      # Commands to make compiler produce verbose output that lists
 	      # what "hidden" libraries, object files and flags are used when
 	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
 	    else
 	      # FIXME: insert proper C++ library support
@@ -12482,7 +13042,7 @@
 
       solaris*)
         case $cc_basename in
-          CC*)
+          CC* | sunCC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
             archive_cmds_need_lc_CXX=yes
 	    no_undefined_flag_CXX=' -zdefs'
@@ -12503,7 +13063,7 @@
 	    esac
 	    link_all_deplibs_CXX=yes
 
-	    output_verbose_link_cmd='echo'
+	    output_verbose_link_cmd='func_echo_all'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -12523,14 +13083,14 @@
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
 	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
 	        # platform.
@@ -12541,7 +13101,7 @@
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
 	      hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
@@ -12595,6 +13155,10 @@
           CC*)
 	    archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+	      '"$old_archive_cmds_CXX"
+	    reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+	      '"$reload_cmds_CXX"
 	    ;;
 	  *)
 	    archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -12656,6 +13220,14 @@
 };
 _LT_EOF
 
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
 if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -12669,7 +13241,7 @@
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case $p in
+    case ${prev}${p} in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
@@ -12678,13 +13250,22 @@
           test $p = "-R"; then
 	 prev=$p
 	 continue
-       else
-	 prev=
        fi
 
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
        if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
+	 case ${prev} in
+	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
@@ -12704,8 +13285,10 @@
 	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
 	 fi
        fi
+       prev=
        ;;
 
+    *.lto.$objext) ;; # Ignore GCC LTO objects
     *.$objext)
        # This assumes that the test object file only shows up
        # once in the compiler output.
@@ -12741,6 +13324,7 @@
 fi
 
 $RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
 
 # PORTME: override above test on systems where it is broken
 case $host_os in
@@ -12776,7 +13360,7 @@
 
 solaris*)
   case $cc_basename in
-  CC*)
+  CC* | sunCC*)
     # The more standards-conforming stlport4 library is
     # incompatible with the Cstd library. Avoid specifying
     # it if it's in CXXFLAGS. Ignore libCrun as
@@ -12841,8 +13425,6 @@
 lt_prog_compiler_pic_CXX=
 lt_prog_compiler_static_CXX=
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
   # C++ specific cases for pic, static, wl, etc.
   if test "$GXX" = yes; then
@@ -12892,6 +13474,11 @@
       # DJGPP does not support shared libraries at all
       lt_prog_compiler_pic_CXX=
       ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_CXX=
+      ;;
     interix[3-9]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
@@ -12941,6 +13528,11 @@
 	  ;;
 	esac
 	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+	;;
       dgux*)
 	case $cc_basename in
 	  ec++*)
@@ -13030,8 +13622,8 @@
 	    lt_prog_compiler_pic_CXX=
 	    lt_prog_compiler_static_CXX='-non_shared'
 	    ;;
-	  xlc* | xlC*)
-	    # IBM XL 8.0 on PPC
+	  xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    lt_prog_compiler_pic_CXX='-qpic'
 	    lt_prog_compiler_static_CXX='-qstaticlink'
@@ -13093,7 +13685,7 @@
 	;;
       solaris*)
 	case $cc_basename in
-	  CC*)
+	  CC* | sunCC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    lt_prog_compiler_static_CXX='-Bstatic'
@@ -13158,10 +13750,17 @@
     lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
     ;;
 esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5
-$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
 
-
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
 
 #
 # Check to make sure the PIC flag actually works.
@@ -13169,7 +13768,7 @@
 if test -n "$lt_prog_compiler_pic_CXX"; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then :
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_pic_works_CXX=no
@@ -13185,15 +13784,15 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13188: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:13192: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_pic_works_CXX=yes
@@ -13219,13 +13818,15 @@
 
 
 
+
+
 #
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then :
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_static_works_CXX=no
@@ -13238,7 +13839,7 @@
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&5
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          lt_cv_prog_compiler_static_works_CXX=yes
@@ -13265,7 +13866,7 @@
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o_CXX=no
@@ -13284,16 +13885,16 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13287: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:13291: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o_CXX=yes
@@ -13317,7 +13918,7 @@
 
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then :
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
   $as_echo_n "(cached) " >&6
 else
   lt_cv_prog_compiler_c_o_CXX=no
@@ -13336,16 +13937,16 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13339: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:13343: \$? = $ac_status" >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o_CXX=yes
@@ -13396,30 +13997,40 @@
 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
   export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   case $host_os in
   aix[4-9]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    # Also, AIX nm treats weak defined symbols like other global defined
+    # symbols, whereas GNU nm marks them as "W".
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
       export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
     export_symbols_cmds_CXX="$ltdll_cmds"
-  ;;
+    ;;
   cygwin* | mingw* | cegcc*)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
+    case $cc_basename in
+    cl*)
+      exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+      ;;
+    esac
+    ;;
+  linux* | k*bsd*-gnu | gnu*)
     link_all_deplibs_CXX=no
-  ;;
+    ;;
   *)
     export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
+    ;;
   esac
-  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
 
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
 $as_echo "$ld_shlibs_CXX" >&6; }
@@ -13451,44 +14062,50 @@
       # to ld, don't add -lc before -lgcc.
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_CXX
-	pic_flag=$lt_prog_compiler_pic_CXX
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-        allow_undefined_flag_CXX=
-        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_CXX
+	  pic_flag=$lt_prog_compiler_pic_CXX
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+	  allow_undefined_flag_CXX=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
   (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-        then
-	  archive_cmds_need_lc_CXX=no
-        else
-	  archive_cmds_need_lc_CXX=yes
-        fi
-        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5
-$as_echo "$archive_cmds_need_lc_CXX" >&6; }
+	  then
+	    lt_cv_archive_cmds_need_lc_CXX=no
+	  else
+	    lt_cv_archive_cmds_need_lc_CXX=yes
+	  fi
+	  allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+      archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
       ;;
     esac
   fi
@@ -13556,8 +14173,6 @@
 
 
 
-
-
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
 $as_echo_n "checking dynamic linker characteristics... " >&6; }
 
@@ -13583,7 +14198,7 @@
 
 case $host_os in
 aix3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
@@ -13592,7 +14207,7 @@
   ;;
 
 aix[4-9]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
@@ -13645,7 +14260,7 @@
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -13657,7 +14272,7 @@
   ;;
 
 bsdi[45]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -13676,8 +14291,9 @@
   need_version=no
   need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
@@ -13698,36 +14314,82 @@
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
     ;;
 
   *)
+    # Assume MSVC wrapper
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
     ;;
   esac
-  dynamic_linker='Win32 ld.exe'
   # FIXME: first we should search . and the directory the executable is in
   shlibpath_var=PATH
   ;;
@@ -13747,7 +14409,7 @@
   ;;
 
 dgux*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
@@ -13755,10 +14417,6 @@
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -13766,7 +14424,7 @@
     objformat=`/usr/bin/objformat`
   else
     case $host_os in
-    freebsd[123]*) objformat=aout ;;
+    freebsd[23].*) objformat=aout ;;
     *) objformat=elf ;;
     esac
   fi
@@ -13784,7 +14442,7 @@
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
-  freebsd2*)
+  freebsd2.*)
     shlibpath_overrides_runpath=yes
     ;;
   freebsd3.[01]* | freebsdelf3.[01]*)
@@ -13804,12 +14462,26 @@
   ;;
 
 gnu*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
 
@@ -13855,12 +14527,14 @@
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
   postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
   ;;
 
 interix[3-9]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
@@ -13876,7 +14550,7 @@
     nonstopux*) version_type=nonstopux ;;
     *)
 	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
+		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
 	fi ;;
@@ -13913,9 +14587,9 @@
   dynamic_linker=no
   ;;
 
-# This must be Linux ELF.
+# This must be glibc/ELF.
 linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -13923,12 +14597,17 @@
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+
   # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
-       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -13941,13 +14620,17 @@
 _ACEOF
 if ac_fn_cxx_try_link "$LINENO"; then :
   if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
-  shlibpath_overrides_runpath=yes
+  lt_cv_shlibpath_overrides_runpath=yes
 fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
@@ -13956,7 +14639,7 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -14000,7 +14683,7 @@
   ;;
 
 newsos6)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
@@ -14069,7 +14752,7 @@
   ;;
 
 solaris*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -14094,7 +14777,7 @@
   ;;
 
 sysv4 | sysv4.3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -14118,7 +14801,7 @@
 
 sysv4*MP*)
   if test -d /usr/nec ;then
-    version_type=linux
+    version_type=linux # correct to gnu/linux during the next big refactor
     library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
     soname_spec='$libname${shared_ext}.$major'
     shlibpath_var=LD_LIBRARY_PATH
@@ -14149,7 +14832,7 @@
 
 tpf*)
   # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -14159,7 +14842,7 @@
   ;;
 
 uts4*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -14220,6 +14903,8 @@
 
 
 
+
+
     { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
 $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action_CXX=
@@ -14267,6 +14952,7 @@
   fi # test -n "$compiler"
 
   CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
   LDCXX=$LD
   LD=$lt_save_LD
   GCC=$lt_save_GCC
@@ -14295,6 +14981,8 @@
 
 
 
+
+
         ac_config_commands="$ac_config_commands libtool"
 
 
@@ -14317,23 +15005,25 @@
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
 
-ac_fn_cxx_check_type "$LINENO" "std::tr1::hash<long long unsigned>" "ac_cv_type_std__tr1__hash_long_long_unsigned_" "#include <tr1/unordered_map>
+as_ac_Type=`$as_echo "ac_cv_type_std::tr1::hash<long long unsigned>" | $as_tr_sh`
+ac_fn_cxx_check_type "$LINENO" "std::tr1::hash<long long unsigned>" "$as_ac_Type" "#include <tr1/unordered_map>
 "
-if test "x$ac_cv_type_std__tr1__hash_long_long_unsigned_" = x""yes; then :
+if eval test \"x\$"$as_ac_Type"\" = x"yes"; then :
 
 cat >>confdefs.h <<_ACEOF
-#define HAVE_STD__TR1__HASH_LONG_LONG_UNSIGNED_ 1
+#define `$as_echo "HAVE_std::tr1::hash<long long unsigned>" | $as_tr_cpp` 1
 _ACEOF
 
 
 fi
 
-ac_fn_cxx_check_type "$LINENO" "__gnu_cxx::slist<int>" "ac_cv_type___gnu_cxx__slist_int_" "#include <ext/slist>
+as_ac_Type=`$as_echo "ac_cv_type___gnu_cxx::slist<int>" | $as_tr_sh`
+ac_fn_cxx_check_type "$LINENO" "__gnu_cxx::slist<int>" "$as_ac_Type" "#include <ext/slist>
 "
-if test "x$ac_cv_type___gnu_cxx__slist_int_" = x""yes; then :
+if eval test \"x\$"$as_ac_Type"\" = x"yes"; then :
 
 cat >>confdefs.h <<_ACEOF
-#define HAVE___GNU_CXX__SLIST_INT_ 1
+#define `$as_echo "HAVE___gnu_cxx::slist<int>" | $as_tr_cpp` 1
 _ACEOF
 
 
@@ -14460,128 +15150,6 @@
 fi
 
 
-
-# Check whether --with-icu was given.
-if test "${with_icu+set}" = set; then :
-  withval=$with_icu;
-else
-  with_icu=no
-fi
-
-if test "x$with_icu" != xno; then :
-
-  succeeded=no
-
-  if test -z "$ICU_CONFIG"; then
-    # Extract the first word of "icu-config", so it can be a program name with args.
-set dummy icu-config; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_ICU_CONFIG+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  case $ICU_CONFIG in
-  [\\/]* | ?:[\\/]*)
-  ac_cv_path_ICU_CONFIG="$ICU_CONFIG" # Let the user override the test with a path.
-  ;;
-  *)
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-    for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_path_ICU_CONFIG="$as_dir/$ac_word$ac_exec_ext"
-    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-  done
-IFS=$as_save_IFS
-
-  test -z "$ac_cv_path_ICU_CONFIG" && ac_cv_path_ICU_CONFIG="no"
-  ;;
-esac
-fi
-ICU_CONFIG=$ac_cv_path_ICU_CONFIG
-if test -n "$ICU_CONFIG"; then
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICU_CONFIG" >&5
-$as_echo "$ICU_CONFIG" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-  fi
-
-  if test "$ICU_CONFIG" = "no" ; then
-    echo "*** The icu-config script could not be found. Make sure it is"
-    echo "*** in your path, and that taglib is properly installed."
-    echo "*** Or see http://ibm.com/software/globalization/icu/"
-  else
-    ICU_VERSION=`$ICU_CONFIG --version`
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ICU >= 4.2" >&5
-$as_echo_n "checking for ICU >= 4.2... " >&6; }
-        VERSION_CHECK=`expr $ICU_VERSION \>\= 4.2`
-        if test "$VERSION_CHECK" = "1" ; then
-            { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-            succeeded=yes
-
-            { $as_echo "$as_me:${as_lineno-$LINENO}: checking ICU_CPPFLAGS" >&5
-$as_echo_n "checking ICU_CPPFLAGS... " >&6; }
-            ICU_CPPFLAGS=`$ICU_CONFIG --cppflags`
-            { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICU_CPPFLAGS" >&5
-$as_echo "$ICU_CPPFLAGS" >&6; }
-
-            { $as_echo "$as_me:${as_lineno-$LINENO}: checking ICU_CFLAGS" >&5
-$as_echo_n "checking ICU_CFLAGS... " >&6; }
-            ICU_CFLAGS=`$ICU_CONFIG --cflags`
-            { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICU_CFLAGS" >&5
-$as_echo "$ICU_CFLAGS" >&6; }
-
-            { $as_echo "$as_me:${as_lineno-$LINENO}: checking ICU_CXXFLAGS" >&5
-$as_echo_n "checking ICU_CXXFLAGS... " >&6; }
-            ICU_CXXFLAGS=`$ICU_CONFIG --cxxflags`
-            { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICU_CXXFLAGS" >&5
-$as_echo "$ICU_CXXFLAGS" >&6; }
-
-            { $as_echo "$as_me:${as_lineno-$LINENO}: checking ICU_LIBS" >&5
-$as_echo_n "checking ICU_LIBS... " >&6; }
-            ICU_LIBS=`$ICU_CONFIG --ldflags`
-            { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ICU_LIBS" >&5
-$as_echo "$ICU_LIBS" >&6; }
-        else
-            ICU_CPPFLAGS=""
-            ICU_CFLAGS=""
-            ICU_CXXFLAGS=""
-            ICU_LIBS=""
-            ## If we have a custom action on failure, don't print errors, but
-            ## do set a variable so people can do so.
-
-        fi
-
-
-
-
-
-  fi
-
-  if test $succeeded = yes; then
-
-$as_echo "#define HAVE_ICU 1" >>confdefs.h
-
-  else
-     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "--with-icu was given, but ICU Library v. 4.2 or newer not found
-See \`config.log' for more details." "$LINENO" 5; }
-  fi
-
-fi
-
 libfstdir=${libdir}/fst
 
 
@@ -14649,10 +15217,21 @@
      :end' >>confcache
 if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
   if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
+    if test "x$cache_file" != "x/dev/null"; then
       { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
 $as_echo "$as_me: updating cache $cache_file" >&6;}
-    cat confcache >$cache_file
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
   else
     { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
@@ -14668,6 +15247,7 @@
 
 ac_libobjs=
 ac_ltlibobjs=
+U=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
   ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
@@ -14691,55 +15271,51 @@
 fi
 
 if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  as_fn_error "conditional \"AMDEP\" was never defined.
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
-  as_fn_error "conditional \"am__fastdepCXX\" was never defined.
+  as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  as_fn_error "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
-  as_fn_error "conditional \"am__fastdepCXX\" was never defined.
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_BIN_TRUE}" && test -z "${HAVE_BIN_FALSE}"; then
-  as_fn_error "conditional \"HAVE_BIN\" was never defined.
+  as_fn_error $? "conditional \"HAVE_BIN\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_SCRIPT_TRUE}" && test -z "${HAVE_SCRIPT_FALSE}"; then
-  as_fn_error "conditional \"HAVE_SCRIPT\" was never defined.
+  as_fn_error $? "conditional \"HAVE_SCRIPT\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_COMPACT_TRUE}" && test -z "${HAVE_COMPACT_FALSE}"; then
-  as_fn_error "conditional \"HAVE_COMPACT\" was never defined.
+  as_fn_error $? "conditional \"HAVE_COMPACT\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_CONST_TRUE}" && test -z "${HAVE_CONST_FALSE}"; then
-  as_fn_error "conditional \"HAVE_CONST\" was never defined.
+  as_fn_error $? "conditional \"HAVE_CONST\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_FAR_TRUE}" && test -z "${HAVE_FAR_FALSE}"; then
-  as_fn_error "conditional \"HAVE_FAR\" was never defined.
+  as_fn_error $? "conditional \"HAVE_FAR\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_NGRAM_TRUE}" && test -z "${HAVE_NGRAM_FALSE}"; then
-  as_fn_error "conditional \"HAVE_NGRAM\" was never defined.
+  as_fn_error $? "conditional \"HAVE_NGRAM\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_LOOKAHEAD_TRUE}" && test -z "${HAVE_LOOKAHEAD_FALSE}"; then
-  as_fn_error "conditional \"HAVE_LOOKAHEAD\" was never defined.
+  as_fn_error $? "conditional \"HAVE_LOOKAHEAD\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 if test -z "${HAVE_PDT_TRUE}" && test -z "${HAVE_PDT_FALSE}"; then
-  as_fn_error "conditional \"HAVE_PDT\" was never defined.
+  as_fn_error $? "conditional \"HAVE_PDT\" was never defined.
 Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
 ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
@@ -14840,6 +15416,7 @@
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
 case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -14885,19 +15462,19 @@
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
 # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
 # provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
 as_fn_error ()
 {
-  as_status=$?; test $as_status -eq 0 && as_status=1
-  if test "$3"; then
-    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
-    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
   fi
-  $as_echo "$as_me: error: $1" >&2
+  $as_echo "$as_me: error: $2" >&2
   as_fn_exit $as_status
 } # as_fn_error
 
@@ -15093,7 +15670,7 @@
       test -d "$as_dir" && break
     done
     test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
 
 
 } # as_fn_mkdir_p
@@ -15146,8 +15723,8 @@
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by OpenFst $as_me 1.3.2, which was
-generated by GNU Autoconf 2.65.  Invocation command line was
+This file was extended by OpenFst $as_me 1.3.3, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -15212,11 +15789,11 @@
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-OpenFst config.status 1.3.2
-configured by $0, generated by GNU Autoconf 2.65,
+OpenFst config.status 1.3.3
+configured by $0, generated by GNU Autoconf 2.68,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2010 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -15234,11 +15811,16 @@
 while test $# != 0
 do
   case $1 in
-  --*=*)
+  --*=?*)
     ac_option=`expr "X$1" : 'X\([^=]*\)='`
     ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
   *)
     ac_option=$1
     ac_optarg=$2
@@ -15260,6 +15842,7 @@
     $ac_shift
     case $ac_optarg in
     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
     esac
     as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
@@ -15272,7 +15855,7 @@
     ac_need_defaults=false;;
   --he | --h)
     # Conflict between --help and --header
-    as_fn_error "ambiguous option: \`$1'
+    as_fn_error $? "ambiguous option: \`$1'
 Try \`$0 --help' for more information.";;
   --help | --hel | -h )
     $as_echo "$ac_cs_usage"; exit ;;
@@ -15281,7 +15864,7 @@
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) as_fn_error "unrecognized option: \`$1'
+  -*) as_fn_error $? "unrecognized option: \`$1'
 Try \`$0 --help' for more information." ;;
 
   *) as_fn_append ac_config_targets " $1"
@@ -15335,184 +15918,208 @@
 sed_quote_subst='$sed_quote_subst'
 double_quote_subst='$double_quote_subst'
 delay_variable_subst='$delay_variable_subst'
-enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
-macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
-host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
-host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
-host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
-build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
-build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
-build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
-SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
-Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
-GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
-EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
-FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
-LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
-NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
-LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
-exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
-AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
-compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
-GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
-SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
-ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
-need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
-LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
-libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
-need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
-version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
-striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`'
-predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`'
-postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`'
-predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`'
-postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`'
-LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
-compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
 
 LTCC='$LTCC'
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
 # Quote evaled strings.
-for var in SED \
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
 GREP \
 EGREP \
 FGREP \
@@ -15525,8 +16132,13 @@
 OBJDUMP \
 deplibs_check_method \
 file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
 AR \
 AR_FLAGS \
+archiver_list_spec \
 STRIP \
 RANLIB \
 CC \
@@ -15536,14 +16148,14 @@
 lt_cv_sys_global_symbol_to_cdecl \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-SHELL \
-ECHO \
+nm_file_list_spec \
 lt_prog_compiler_no_builtin_flag \
-lt_prog_compiler_wl \
 lt_prog_compiler_pic \
+lt_prog_compiler_wl \
 lt_prog_compiler_static \
 lt_cv_prog_compiler_c_o \
 need_locks \
+MANIFEST_TOOL \
 DSYMUTIL \
 NMEDIT \
 LIPO \
@@ -15557,9 +16169,7 @@
 allow_undefined_flag \
 no_undefined_flag \
 hardcode_libdir_flag_spec \
-hardcode_libdir_flag_spec_ld \
 hardcode_libdir_separator \
-fix_srcfile_path \
 exclude_expsyms \
 include_expsyms \
 file_list_spec \
@@ -15567,6 +16177,7 @@
 libname_spec \
 library_names_spec \
 soname_spec \
+install_override_mode \
 finish_eval \
 old_striplib \
 striplib \
@@ -15577,10 +16188,11 @@
 postdeps \
 compiler_lib_search_path \
 LD_CXX \
+reload_flag_CXX \
 compiler_CXX \
 lt_prog_compiler_no_builtin_flag_CXX \
-lt_prog_compiler_wl_CXX \
 lt_prog_compiler_pic_CXX \
+lt_prog_compiler_wl_CXX \
 lt_prog_compiler_static_CXX \
 lt_cv_prog_compiler_c_o_CXX \
 export_dynamic_flag_spec_CXX \
@@ -15590,9 +16202,7 @@
 allow_undefined_flag_CXX \
 no_undefined_flag_CXX \
 hardcode_libdir_flag_spec_CXX \
-hardcode_libdir_flag_spec_ld_CXX \
 hardcode_libdir_separator_CXX \
-fix_srcfile_path_CXX \
 exclude_expsyms_CXX \
 include_expsyms_CXX \
 file_list_spec_CXX \
@@ -15602,9 +16212,9 @@
 predeps_CXX \
 postdeps_CXX \
 compiler_lib_search_path_CXX; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -15626,11 +16236,13 @@
 module_expsym_cmds \
 export_symbols_cmds \
 prelink_cmds \
+postlink_cmds \
 postinstall_cmds \
 postuninstall_cmds \
 finish_cmds \
 sys_lib_search_path_spec \
 sys_lib_dlsearch_path_spec \
+reload_cmds_CXX \
 old_archive_cmds_CXX \
 old_archive_from_new_cmds_CXX \
 old_archive_from_expsyms_cmds_CXX \
@@ -15639,10 +16251,11 @@
 module_cmds_CXX \
 module_expsym_cmds_CXX \
 export_symbols_cmds_CXX \
-prelink_cmds_CXX; do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+prelink_cmds_CXX \
+postlink_cmds_CXX; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -15650,12 +16263,6 @@
     esac
 done
 
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
-  ;;
-esac
-
 ac_aux_dir='$ac_aux_dir'
 xsi_shell='$xsi_shell'
 lt_shell_append='$lt_shell_append'
@@ -15705,7 +16312,7 @@
     "src/extensions/pdt/Makefile") CONFIG_FILES="$CONFIG_FILES src/extensions/pdt/Makefile" ;;
     "src/script/Makefile") CONFIG_FILES="$CONFIG_FILES src/script/Makefile" ;;
 
-  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
@@ -15728,9 +16335,10 @@
 # after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  tmp=
+  tmp= ac_tmp=
   trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
 ' 0
   trap 'as_fn_exit 1' 1 2 13 15
 }
@@ -15738,12 +16346,13 @@
 
 {
   tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
+  test -d "$tmp"
 }  ||
 {
   tmp=./conf$$-$RANDOM
   (umask 077 && mkdir "$tmp")
-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
 
 # Set up the scripts for CONFIG_FILES section.
 # No need to generate them if there are no CONFIG_FILES.
@@ -15760,12 +16369,12 @@
 fi
 ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
 if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\r'
+  ac_cs_awk_cr='\\r'
 else
   ac_cs_awk_cr=$ac_cr
 fi
 
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
 _ACEOF
 
 
@@ -15774,18 +16383,18 @@
   echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
   echo "_ACEOF"
 } >conf$$subs.sh ||
-  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   . ./conf$$subs.sh ||
-    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
 
   ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
   if test $ac_delim_n = $ac_delim_num; then
     break
   elif $ac_last_try; then
-    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -15793,7 +16402,7 @@
 rm -f conf$$subs.sh
 
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
 _ACEOF
 sed -n '
 h
@@ -15841,7 +16450,7 @@
 rm -f conf$$subs.awk
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 _ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
   for (key in S) S_is_set[key] = 1
   FS = ""
 
@@ -15873,21 +16482,29 @@
   sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
 else
   cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-  || as_fn_error "could not setup config files machinery" "$LINENO" 5
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
 _ACEOF
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
 # trailing colons and then remove the whole line if VPATH becomes empty
 # (actually we leave an empty line to preserve line numbers).
 if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[	 ]*\):*/\1/
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
 s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
 s/^[^=]*=[	 ]*$//
 }'
 fi
@@ -15899,7 +16516,7 @@
 # No need to generate them if there are no CONFIG_HEADERS.
 # This happens for instance with `./config.status Makefile'.
 if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
 BEGIN {
 _ACEOF
 
@@ -15911,11 +16528,11 @@
 # handling of long lines.
 ac_delim='%!_!# '
 for ac_last_try in false false :; do
-  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
-  if test -z "$ac_t"; then
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
     break
   elif $ac_last_try; then
-    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
   else
     ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
@@ -16000,7 +16617,7 @@
 _ACAWK
 _ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  as_fn_error "could not setup config headers machinery" "$LINENO" 5
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
 fi # test -n "$CONFIG_HEADERS"
 
 
@@ -16013,7 +16630,7 @@
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -16032,7 +16649,7 @@
     for ac_f
     do
       case $ac_f in
-      -) ac_f="$tmp/stdin";;
+      -) ac_f="$ac_tmp/stdin";;
       *) # Look for the file first in the build tree, then in the source tree
 	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
 	 # because $ac_f cannot contain `:'.
@@ -16041,7 +16658,7 @@
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
@@ -16067,8 +16684,8 @@
     esac
 
     case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin" \
-      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
     esac
     ;;
   esac
@@ -16204,23 +16821,24 @@
 s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
 "
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
-  || as_fn_error "could not create $ac_file" "$LINENO" 5
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 
 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&5
+which seems to be undefined.  Please make sure it is defined" >&5
 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&2;}
+which seems to be undefined.  Please make sure it is defined" >&2;}
 
-  rm -f "$tmp/stdin"
+  rm -f "$ac_tmp/stdin"
   case $ac_file in
-  -) cat "$tmp/out" && rm -f "$tmp/out";;
-  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
   esac \
-  || as_fn_error "could not create $ac_file" "$LINENO" 5
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
  ;;
   :H)
   #
@@ -16229,21 +16847,21 @@
   if test x"$ac_file" != x-; then
     {
       $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
-    } >"$tmp/config.h" \
-      || as_fn_error "could not create $ac_file" "$LINENO" 5
-    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
       { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
 $as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
       rm -f "$ac_file"
-      mv "$tmp/config.h" "$ac_file" \
-	|| as_fn_error "could not create $ac_file" "$LINENO" 5
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
     fi
   else
     $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
-      || as_fn_error "could not create -" "$LINENO" 5
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
   fi
 # Compute "$ac_file"'s index in $config_headers.
 _am_arg="$ac_file"
@@ -16404,7 +17022,8 @@
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -16452,6 +17071,15 @@
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
 # The host system.
 host_alias=$host_alias
 host=$host
@@ -16501,9 +17129,11 @@
 # turn newlines into spaces.
 NL2SP=$lt_lt_NL2SP
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
 
 # An object symbol dumper.
 OBJDUMP=$lt_OBJDUMP
@@ -16511,13 +17141,30 @@
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == "file_magic".
+# Command to use when deplibs_check_method = "file_magic".
 file_magic_cmd=$lt_file_magic_cmd
 
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
 # The archiver.
 AR=$lt_AR
+
+# Flags to create an archive.
 AR_FLAGS=$lt_AR_FLAGS
 
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
 # A symbol stripping program.
 STRIP=$lt_STRIP
 
@@ -16526,6 +17173,9 @@
 old_postinstall_cmds=$lt_old_postinstall_cmds
 old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
 # A C compiler.
 LTCC=$lt_CC
 
@@ -16544,21 +17194,24 @@
 # Transform the output of nm in a C name address pair when lib prefix is needed.
 global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that does not interpret backslashes.
-ECHO=$lt_ECHO
-
 # Used to examine libraries when file_magic_cmd begins with "file".
 MAGIC_CMD=$MAGIC_CMD
 
 # Must we lock files when doing compilation?
 need_locks=$lt_need_locks
 
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
 # Tool to manipulate archived DWARF debug symbol files on Mac OS X.
 DSYMUTIL=$lt_DSYMUTIL
 
@@ -16615,6 +17268,9 @@
 # The coded name of the library, if different from the real name.
 soname_spec=$lt_soname_spec
 
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
 # Command to use after installation of a shared archive.
 postinstall_cmds=$lt_postinstall_cmds
 
@@ -16654,6 +17310,10 @@
 # The linker used to build libraries.
 LD=$lt_LD
 
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
 # Commands used to build an old-style archive.
 old_archive_cmds=$lt_old_archive_cmds
 
@@ -16666,12 +17326,12 @@
 # Compiler flag to turn off builtin functions.
 no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
 # Additional compiler flags for building library objects.
 pic_flag=$lt_lt_prog_compiler_pic
 
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
 # Compiler flag to prevent dynamic linking.
 link_static_flag=$lt_lt_prog_compiler_static
 
@@ -16721,10 +17381,6 @@
 # This must work even if \$libdir does not exist
 hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
 
-# If ld is used when linking, flag to hardcode \$libdir into a binary
-# during linking.  This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
-
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
@@ -16758,9 +17414,6 @@
 # Whether libtool must link a program against all its dependency libraries.
 link_all_deplibs=$link_all_deplibs
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
 # Set to "yes" if exported symbols are required.
 always_export_symbols=$always_export_symbols
 
@@ -16776,6 +17429,9 @@
 # Commands necessary for linking programs (against libraries) with templates.
 prelink_cmds=$lt_prelink_cmds
 
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
 # Specify filename containing input files.
 file_list_spec=$lt_file_list_spec
 
@@ -16822,212 +17478,169 @@
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
 
-  case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $* ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
 
 
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[^=]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$@"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1+=\$2"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$1=\$$1\$2"
-}
-
-_LT_EOF
-    ;;
-  esac
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
 
 
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
 
-  mv -f "$cfgfile" "$ofile" ||
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
 
@@ -17039,6 +17652,10 @@
 # The linker used to build libraries.
 LD=$lt_LD_CXX
 
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
 # Commands used to build an old-style archive.
 old_archive_cmds=$lt_old_archive_cmds_CXX
 
@@ -17051,12 +17668,12 @@
 # Compiler flag to turn off builtin functions.
 no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
-
 # Additional compiler flags for building library objects.
 pic_flag=$lt_lt_prog_compiler_pic_CXX
 
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
 # Compiler flag to prevent dynamic linking.
 link_static_flag=$lt_lt_prog_compiler_static_CXX
 
@@ -17106,10 +17723,6 @@
 # This must work even if \$libdir does not exist
 hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
 
-# If ld is used when linking, flag to hardcode \$libdir into a binary
-# during linking.  This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-
 # Whether we need a single "-rpath" flag with a separated argument.
 hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
@@ -17143,9 +17756,6 @@
 # Whether libtool must link a program against all its dependency libraries.
 link_all_deplibs=$link_all_deplibs_CXX
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path_CXX
-
 # Set to "yes" if exported symbols are required.
 always_export_symbols=$always_export_symbols_CXX
 
@@ -17161,6 +17771,9 @@
 # Commands necessary for linking programs (against libraries) with templates.
 prelink_cmds=$lt_prelink_cmds_CXX
 
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
 # Specify filename containing input files.
 file_list_spec=$lt_file_list_spec_CXX
 
@@ -17195,7 +17808,7 @@
 ac_clean_files=$ac_clean_files_save
 
 test $ac_write_fail = 0 ||
-  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
 
 
 # configure is writing to config.log, and then calls config.status.
@@ -17216,7 +17829,7 @@
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || as_fn_exit $?
+  $ac_cs_success || as_fn_exit 1
 fi
 if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
diff --git a/configure.ac b/configure.ac
index 908a6d5..df9ba18 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,4 +1,4 @@
-AC_INIT([OpenFst], [1.3.2], [help@www.openfst.org])
+AC_INIT([OpenFst], [1.3.3], [help@www.openfst.org])
 AM_INIT_AUTOMAKE([foreign nostdinc -Wall -Werror])
 
 AC_PROG_CXX
@@ -85,20 +85,6 @@
               [], [enable_pdt=no])
 AM_CONDITIONAL([HAVE_PDT], [test "x$enable_pdt" != xno])
 
-AC_ARG_WITH([icu],
-  [AS_HELP_STRING([--with-icu],
-    [enable UTF8 support using the ICU Library])],
-  [],
-  [with_icu=no])
-AS_IF([test "x$with_icu" != xno],
-  [AC_CHECK_ICU(
-    [4.2],
-    [AC_DEFINE([HAVE_ICU],
-      [1],
-      [Define to 1 if you have the ICU library.])],
-    [AC_MSG_FAILURE(
-      [--with-icu was given, but ICU Library v. 4.2 or newer not found])])])
-
 AC_SUBST([libfstdir], [${libdir}/fst])
 
 AC_OUTPUT
diff --git a/depcomp b/depcomp
index df8eea7..bd0ac08 100755
--- a/depcomp
+++ b/depcomp
@@ -1,10 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2011-12-04.11; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# 2011 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -44,7 +44,7 @@
   object      Object file output by `PROGRAMS ARGS'.
   DEPDIR      directory where to store dependencies.
   depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
+  tmpdepfile  Temporary file to use when outputting dependencies.
   libtool     Whether libtool is used (yes/no).
 
 Report bugs to <bug-automake@gnu.org>.
@@ -90,10 +90,18 @@
    # This is just like msvisualcpp but w/o cygpath translation.
    # Just convert the backslash-escaped backslashes to single forward
    # slashes to satisfy depend.m4
-   cygpath_u="sed s,\\\\\\\\,/,g"
+   cygpath_u='sed s,\\\\,/,g'
    depmode=msvisualcpp
 fi
 
+if test "$depmode" = msvc7msys; then
+   # This is just like msvc7 but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u='sed s,\\\\,/,g'
+   depmode=msvc7
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
@@ -158,10 +166,12 @@
 ' < "$tmpdepfile" |
 ## Some versions of gcc put a space before the `:'.  On the theory
 ## that the space means something, we add a space to the output as
-## well.
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+    sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+      | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -405,6 +415,52 @@
    rm -f "$tmpdepfile"
    ;;
 
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test "$stat" = 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/	\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/	/
+  G
+  p
+}' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 #nosideeffect)
   # This comment above is used by automake to tell side-effect
   # dependency tracking mechanisms from slower ones.
@@ -503,7 +559,9 @@
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
   sed '1,2d' "$tmpdepfile" | tr ' ' '
 ' | \
 ## Some versions of the HPUX 10.20 sed can't process this invocation
diff --git a/fix_headers.sh b/fix_headers.sh
index b1b0844..51ce18e 100755
--- a/fix_headers.sh
+++ b/fix_headers.sh
@@ -6,7 +6,7 @@
   grep $1 $INPUT_FILE > /dev/null 2>&1
   if [ $? -eq 0 ] ; then
     echo "Modifying $INPUT_FILE ..."
-    sed -e "s/$1/$2/g" $INPUT_FILE > .tmp
+    sed 's/$1/$2/g' $INPUT_FILE > .tmp
     if [ $? -ne 0 ] ; then
       echo "sed failed!"
       return 1
diff --git a/ltmain.sh b/ltmain.sh
old mode 100755
new mode 100644
index 7ed280b..c2852d8
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,9 +1,9 @@
-# Generated from ltmain.m4sh.
 
-# ltmain.sh (GNU libtool) 2.2.6b
+# libtool (GNU libtool) 2.4.2
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -32,50 +32,57 @@
 #
 # Provide generalized library-building support services.
 #
-#     --config             show all configuration variables
-#     --debug              enable verbose shell tracing
-# -n, --dry-run            display commands without modifying any files
-#     --features           display basic configuration information and exit
-#     --mode=MODE          use operation mode MODE
-#     --preserve-dup-deps  don't remove duplicate dependency libraries
-#     --quiet, --silent    don't print informational messages
-#     --tag=TAG            use configuration variables from tag TAG
-# -v, --verbose            print informational messages (default)
-#     --version            print version information
-# -h, --help               print short or long help message
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --no-warn            don't display warning messages
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
 #
 # MODE must be one of the following:
 #
-#       clean              remove files from the build directory
-#       compile            compile a source file into a libtool object
-#       execute            automatically set library path, then run a program
-#       finish             complete the installation of libtool libraries
-#       install            install libraries or executables
-#       link               create a library or an executable
-#       uninstall          remove libraries from an installed directory
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
 #
-# MODE-ARGS vary depending on the MODE.
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #
-#       host-triplet:	$host
-#       shell:		$SHELL
-#       compiler:		$LTCC
-#       compiler flags:		$LTCFLAGS
-#       linker:		$LD (gnu? $with_gnu_ld)
-#       $progname:		(GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1
-#       automake:		$automake_version
-#       autoconf:		$autoconf_version
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU libtool) 2.4.2 Debian-2.4.2-1ubuntu1
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
 #
 # Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
 
-PROGRAM=ltmain.sh
+PROGRAM=libtool
 PACKAGE=libtool
-VERSION="2.2.6b Debian-2.2.6b-2ubuntu1"
+VERSION="2.4.2 Debian-2.4.2-1ubuntu1"
 TIMESTAMP=""
-package_revision=1.3017
+package_revision=1.3337
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -91,10 +98,15 @@
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
 # NLS nuisances: We save the old values to restore during execute mode.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
 lt_user_locale=
 lt_safe_locale=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -107,24 +119,28 @@
 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
 	fi"
 done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
 
 $lt_unset CDPATH
 
 
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
 
 
 
 : ${CP="cp -f"}
-: ${ECHO="echo"}
-: ${EGREP="/bin/grep -E"}
-: ${FGREP="/bin/grep -F"}
-: ${GREP="/bin/grep"}
-: ${LN_S="ln -s"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
-: ${SED="/bin/sed"}
 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
 : ${Xsed="$SED -e 1s/^X//"}
 
@@ -144,6 +160,27 @@
 dirname="s,/[^/]*$,,"
 basename="s,^.*/,,"
 
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
 # func_dirname_and_basename file append nondir_replacement
 # perform func_basename and func_dirname in a single function
 # call:
@@ -158,33 +195,183 @@
 # those functions but instead duplicate the functionality here.
 func_dirname_and_basename ()
 {
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
 }
 
-# Generated shell functions inserted here.
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
 
 # The name of this program:
-# In the unlikely event $progname began with a '-', it would play havoc with
-# func_echo (imagine progname=-n), so we prepend ./ in that case:
 func_dirname_and_basename "$progpath"
 progname=$func_basename_result
-case $progname in
-  -*) progname=./$progname ;;
-esac
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
@@ -196,7 +383,7 @@
      ;;
   *)
      save_IFS="$IFS"
-     IFS=:
+     IFS=${PATH_SEPARATOR-:}
      for progdir in $PATH; do
        IFS="$save_IFS"
        test -x "$progdir/$progname" && break
@@ -215,6 +402,15 @@
 # Same as above, but do not quote variable references.
 double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
 # Re-`\' parameter expansions in output of double_quote_subst that were
 # `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
 # in input to double_quote_subst, that '$' was protected from expansion.
@@ -243,7 +439,7 @@
 # name if it has been set yet.
 func_echo ()
 {
-    $ECHO "$progname${mode+: }$mode: $*"
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
 }
 
 # func_verbose arg...
@@ -258,18 +454,25 @@
     :
 }
 
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
 # func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
 {
-    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
 }
 
 # func_warning arg...
 # Echo program name prefixed warning message to standard error.
 func_warning ()
 {
-    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
 
     # bash bug again:
     :
@@ -326,9 +529,9 @@
         case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
       done
-      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
 
       save_mkdir_p_IFS="$IFS"; IFS=':'
       for my_dir in $my_dir_list; do
@@ -378,7 +581,7 @@
         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $ECHO "X$my_tmpdir" | $Xsed
+    $ECHO "$my_tmpdir"
 }
 
 
@@ -392,7 +595,7 @@
 {
     case $1 in
       *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
       *)
         func_quote_for_eval_unquoted_result="$1" ;;
     esac
@@ -419,7 +622,7 @@
 {
     case $1 in
       *[\\\`\"]*)
-	my_arg=`$ECHO "X$1" | $Xsed \
+	my_arg=`$ECHO "$1" | $SED \
 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
         my_arg="$1" ;;
@@ -488,15 +691,39 @@
     fi
 }
 
-
-
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
 
 
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {
-    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+    $opt_debug
+
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
         s/^# //
 	s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -509,22 +736,28 @@
 # Echo short help message to standard output and exit.
 func_usage ()
 {
-    $SED -n '/^# Usage:/,/# -h/ {
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
         s/^# //
 	s/^# *$//
 	s/\$progname/'$progname'/
 	p
     }' < "$progpath"
-    $ECHO
+    echo
     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 
-# func_help
-# Echo long help message to standard output and exit.
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
 func_help ()
 {
+    $opt_debug
+
     $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
         s/^# //
 	s/^# *$//
 	s*\$progname*'$progname'*
@@ -534,11 +767,18 @@
 	s*\$LTCFLAGS*'"$LTCFLAGS"'*
 	s*\$LD*'"$LD"'*
 	s/\$with_gnu_ld/'"$with_gnu_ld"'/
-	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
-	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
 	p
-     }' < "$progpath"
-    exit $?
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
 }
 
 # func_missing_arg argname
@@ -546,63 +786,106 @@
 # exit_cmd.
 func_missing_arg ()
 {
-    func_error "missing argument for $1"
+    $opt_debug
+
+    func_error "missing argument for $1."
     exit_cmd=exit
 }
 
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
+
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
 exit_cmd=:
 
 
 
 
 
-# Check that we have a working $ECHO.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell, and then maybe $ECHO will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-
 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"
 
 # Global variables.
-# $mode is unset
 nonopt=
-execute_dlfiles=
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
 extracted_archives=
 extracted_serial=0
 
-opt_dry_run=false
-opt_duplicate_deps=false
-opt_silent=false
-opt_debug=:
-
 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
 exec_cmd=
 
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+    eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+    func_quote_for_eval "${2}"
+    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+    func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
 # func_fatal_configuration arg...
 # Echo program name prefixed message to standard error, followed by
 # a configuration failure hint, and exit.
@@ -636,16 +919,16 @@
 # Display the features supported by this script.
 func_features ()
 {
-    $ECHO "host: $host"
+    echo "host: $host"
     if test "$build_libtool_libs" = yes; then
-      $ECHO "enable shared libraries"
+      echo "enable shared libraries"
     else
-      $ECHO "disable shared libraries"
+      echo "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      $ECHO "enable static libraries"
+      echo "enable static libraries"
     else
-      $ECHO "disable static libraries"
+      echo "disable static libraries"
     fi
 
     exit $?
@@ -692,133 +975,6 @@
   esac
 }
 
-# Parse options once, thoroughly.  This comes as soon as possible in
-# the script to make things like `libtool --version' happen quickly.
-{
-
-  # Shorthand for --mode=foo, only valid as the first argument
-  case $1 in
-  clean|clea|cle|cl)
-    shift; set dummy --mode clean ${1+"$@"}; shift
-    ;;
-  compile|compil|compi|comp|com|co|c)
-    shift; set dummy --mode compile ${1+"$@"}; shift
-    ;;
-  execute|execut|execu|exec|exe|ex|e)
-    shift; set dummy --mode execute ${1+"$@"}; shift
-    ;;
-  finish|finis|fini|fin|fi|f)
-    shift; set dummy --mode finish ${1+"$@"}; shift
-    ;;
-  install|instal|insta|inst|ins|in|i)
-    shift; set dummy --mode install ${1+"$@"}; shift
-    ;;
-  link|lin|li|l)
-    shift; set dummy --mode link ${1+"$@"}; shift
-    ;;
-  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
-    shift; set dummy --mode uninstall ${1+"$@"}; shift
-    ;;
-  esac
-
-  # Parse non-mode specific arguments:
-  while test "$#" -gt 0; do
-    opt="$1"
-    shift
-
-    case $opt in
-      --config)		func_config					;;
-
-      --debug)		preserve_args="$preserve_args $opt"
-			func_echo "enabling shell trace mode"
-			opt_debug='set -x'
-			$opt_debug
-			;;
-
-      -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
-			execute_dlfiles="$execute_dlfiles $1"
-			shift
-			;;
-
-      --dry-run | -n)	opt_dry_run=:					;;
-      --features)       func_features					;;
-      --finish)		mode="finish"					;;
-
-      --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
-			case $1 in
-			  # Valid mode arguments:
-			  clean)	;;
-			  compile)	;;
-			  execute)	;;
-			  finish)	;;
-			  install)	;;
-			  link)		;;
-			  relink)	;;
-			  uninstall)	;;
-
-			  # Catch anything else as an error
-			  *) func_error "invalid argument for $opt"
-			     exit_cmd=exit
-			     break
-			     ;;
-		        esac
-
-			mode="$1"
-			shift
-			;;
-
-      --preserve-dup-deps)
-			opt_duplicate_deps=:				;;
-
-      --quiet|--silent)	preserve_args="$preserve_args $opt"
-			opt_silent=:
-			;;
-
-      --verbose| -v)	preserve_args="$preserve_args $opt"
-			opt_silent=false
-			;;
-
-      --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
-			preserve_args="$preserve_args $opt $1"
-			func_enable_tag "$1"	# tagname is set here
-			shift
-			;;
-
-      # Separate optargs to long options:
-      -dlopen=*|--mode=*|--tag=*)
-			func_opt_split "$opt"
-			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
-			shift
-			;;
-
-      -\?|-h)		func_usage					;;
-      --help)		opt_help=:					;;
-      --version)	func_version					;;
-
-      -*)		func_fatal_help "unrecognized option \`$opt'"	;;
-
-      *)		nonopt="$opt"
-			break
-			;;
-    esac
-  done
-
-
-  case $host in
-    *cygwin* | *mingw* | *pw32* | *cegcc*)
-      # don't eliminate duplications in $postdeps and $predeps
-      opt_duplicate_compiler_generated_deps=:
-      ;;
-    *)
-      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
-      ;;
-  esac
-
-  # Having warned about all mis-specified options, bail out if
-  # anything was wrong.
-  $exit_cmd $EXIT_FAILURE
-}
-
 # func_check_version_match
 # Ensure that we are using m4 macros, and libtool script from the same
 # release of libtool.
@@ -855,38 +1011,219 @@
 }
 
 
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+  shift; set dummy --mode clean ${1+"$@"}; shift
+  ;;
+compile|compil|compi|comp|com|co|c)
+  shift; set dummy --mode compile ${1+"$@"}; shift
+  ;;
+execute|execut|execu|exec|exe|ex|e)
+  shift; set dummy --mode execute ${1+"$@"}; shift
+  ;;
+finish|finis|fini|fin|fi|f)
+  shift; set dummy --mode finish ${1+"$@"}; shift
+  ;;
+install|instal|insta|inst|ins|in|i)
+  shift; set dummy --mode install ${1+"$@"}; shift
+  ;;
+link|lin|li|l)
+  shift; set dummy --mode link ${1+"$@"}; shift
+  ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+  shift; set dummy --mode uninstall ${1+"$@"}; shift
+  ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+  # this just eases exit handling
+  while test $# -gt 0; do
+    opt="$1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+      --dry-run|--dryrun|-n)
+			opt_dry_run=:
+			;;
+      --config)
+			opt_config=:
+func_config
+			;;
+      --dlopen|-dlopen)
+			optarg="$1"
+			opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+			shift
+			;;
+      --preserve-dup-deps)
+			opt_preserve_dup_deps=:
+			;;
+      --features)
+			opt_features=:
+func_features
+			;;
+      --finish)
+			opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+			;;
+      --help)
+			opt_help=:
+			;;
+      --help-all)
+			opt_help_all=:
+opt_help=': help-all'
+			;;
+      --mode)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_mode="$optarg"
+case $optarg in
+  # Valid mode arguments:
+  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+  # Catch anything else as an error
+  *) func_error "invalid argument for $opt"
+     exit_cmd=exit
+     break
+     ;;
+esac
+			shift
+			;;
+      --no-silent|--no-quiet)
+			opt_silent=false
+func_append preserve_args " $opt"
+			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+func_append preserve_args " $opt"
+			;;
+      --no-verbose)
+			opt_verbose=false
+func_append preserve_args " $opt"
+			;;
+      --silent|--quiet)
+			opt_silent=:
+func_append preserve_args " $opt"
+        opt_verbose=false
+			;;
+      --verbose|-v)
+			opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+			;;
+      --tag)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+			shift
+			;;
+
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      # Separate non-argument short options:
+      -\?*|-h*|-n*|-v*)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    esac
+  done
+
+  # Validate options:
+
+  # save first non-option argument
+  if test "$#" -gt 0; then
+    nonopt="$opt"
+    shift
+  fi
+
+  # preserve --debug
+  test "$opt_debug" = : || func_append preserve_args " --debug"
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      ;;
+  esac
+
+  $opt_help || {
+    # Sanity checks first:
+    func_check_version_match
+
+    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+      func_fatal_configuration "not configured to build any kind of library"
+    fi
+
+    # Darwin sucks
+    eval std_shrext=\"$shrext_cmds\"
+
+    # Only execute mode is allowed to have -dlopen flags.
+    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+      func_error "unrecognized option \`-dlopen'"
+      $ECHO "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Change the help message to a mode-specific one.
+    generic_help="$help"
+    help="Try \`$progname --help --mode=$opt_mode' for more information."
+  }
+
+
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
 ## ----------- ##
 ##    Main.    ##
 ## ----------- ##
 
-$opt_help || {
-  # Sanity checks first:
-  func_check_version_match
-
-  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-    func_fatal_configuration "not configured to build any kind of library"
-  fi
-
-  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
-
-
-  # Darwin sucks
-  eval std_shrext=\"$shrext_cmds\"
-
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    func_error "unrecognized option \`-dlopen'"
-    $ECHO "$help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$progname --help --mode=$mode' for more information."
-}
-
-
 # func_lalib_p file
 # True iff FILE is a libtool `.la' library or `.lo' object file.
 # This function is only a basic sanity check; it will hardly flush out
@@ -950,12 +1287,9 @@
 # temporary ltwrapper_script.
 func_ltwrapper_scriptname ()
 {
-    func_ltwrapper_scriptname_result=""
-    if func_ltwrapper_executable_p "$1"; then
-	func_dirname_and_basename "$1" "" "."
-	func_stripname '' '.exe' "$func_basename_result"
-	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-    fi
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
 }
 
 # func_ltwrapper_p file
@@ -1001,6 +1335,37 @@
 }
 
 
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case "$lt_sysroot:$1" in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result="=$func_stripname_result"
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
 # func_infer_tag arg
 # Infer tagged configuration to use if any are available and
 # if one wasn't chosen via the "--tag" command line option.
@@ -1013,13 +1378,15 @@
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
-        func_quote_for_eval "$arg"
-	CC_quoted="$CC_quoted $func_quote_for_eval_result"
+	func_append_quoted CC_quoted "$arg"
       done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
@@ -1030,11 +1397,13 @@
 	    CC_quoted=
 	    for arg in $CC; do
 	      # Double-quote args containing other shell metacharacters.
-	      func_quote_for_eval "$arg"
-	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
+	      func_append_quoted CC_quoted "$arg"
 	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
 	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
 	      # Assume this is the tagged configuration we want.
@@ -1097,6 +1466,486 @@
     }
 }
 
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $opt_debug
+  func_convert_core_file_wine_to_w32_result="$1"
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$lt_sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $opt_debug
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=""
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $opt_debug
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $opt_debug
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $opt_debug
+  if test -z "$2" && test -n "$1" ; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  \`$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result="$1"
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $opt_debug
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  \`$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result="$3"
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $opt_debug
+  case $4 in
+  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $opt_debug
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $opt_debug
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $opt_debug
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $opt_debug
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
 # func_mode_compile arg...
 func_mode_compile ()
 {
@@ -1137,12 +1986,12 @@
 	  ;;
 
 	-pie | -fpie | -fPIE)
-          pie_flag="$pie_flag $arg"
+          func_append pie_flag " $arg"
 	  continue
 	  ;;
 
 	-shared | -static | -prefer-pic | -prefer-non-pic)
-	  later="$later $arg"
+	  func_append later " $arg"
 	  continue
 	  ;;
 
@@ -1163,15 +2012,14 @@
 	  save_ifs="$IFS"; IFS=','
 	  for arg in $args; do
 	    IFS="$save_ifs"
-	    func_quote_for_eval "$arg"
-	    lastarg="$lastarg $func_quote_for_eval_result"
+	    func_append_quoted lastarg "$arg"
 	  done
 	  IFS="$save_ifs"
 	  func_stripname ' ' '' "$lastarg"
 	  lastarg=$func_stripname_result
 
 	  # Add the arguments to base_compile.
-	  base_compile="$base_compile $lastarg"
+	  func_append base_compile " $lastarg"
 	  continue
 	  ;;
 
@@ -1187,8 +2035,7 @@
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.
-      func_quote_for_eval "$lastarg"
-      base_compile="$base_compile $func_quote_for_eval_result"
+      func_append_quoted base_compile "$lastarg"
     done # for arg
 
     case $arg_mode in
@@ -1213,7 +2060,7 @@
     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
       func_xform "$libobj"
       libobj=$func_xform_result
       ;;
@@ -1288,7 +2135,7 @@
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
     else
       output_obj=
@@ -1319,17 +2166,16 @@
 	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
-      removelist="$removelist $output_obj"
+      func_append removelist " $output_obj"
       $ECHO "$srcfile" > "$lockfile"
     fi
 
     $opt_dry_run || $RM $removelist
-    removelist="$removelist $lockfile"
+    func_append removelist " $lockfile"
     trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
 
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
     func_quote_for_eval "$srcfile"
     qsrcfile=$func_quote_for_eval_result
 
@@ -1349,7 +2195,7 @@
 
       if test -z "$output_obj"; then
 	# Place PIC objects in $objdir
-	command="$command -o $lobj"
+	func_append command " -o $lobj"
       fi
 
       func_show_eval_locale "$command"	\
@@ -1396,11 +2242,11 @@
 	command="$base_compile $qsrcfile $pic_flag"
       fi
       if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
+	func_append command " -o $obj"
       fi
 
       # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
+      func_append command "$suppress_output"
       func_show_eval_locale "$command" \
         '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
@@ -1445,13 +2291,13 @@
 }
 
 $opt_help || {
-test "$mode" = compile && func_mode_compile ${1+"$@"}
+  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
 {
     # We need to display help for each of the modes.
-    case $mode in
+    case $opt_mode in
       "")
         # Generic help is extracted from the usage comments
         # at the start of this file.
@@ -1482,10 +2328,11 @@
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
@@ -1538,7 +2385,7 @@
 
 The following components of INSTALL-COMMAND are treated specially:
 
-  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
@@ -1558,6 +2405,8 @@
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -1586,6 +2435,11 @@
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
 All other options (arguments beginning with \`-') are ignored.
 
@@ -1619,18 +2473,44 @@
         ;;
 
       *)
-        func_fatal_help "invalid operation mode \`$mode'"
+        func_fatal_help "invalid operation mode \`$opt_mode'"
         ;;
     esac
 
-    $ECHO
+    echo
     $ECHO "Try \`$progname --help' for more information about other modes."
-
-    exit $?
 }
 
-  # Now that we've collected a possible --mode arg, show help if necessary
-  $opt_help && func_mode_help
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test "$opt_help" = :; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    sed '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
 
 
 # func_mode_execute arg...
@@ -1643,13 +2523,16 @@
       func_fatal_help "you must specify a COMMAND"
 
     # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
+    for file in $opt_dlopen; do
       test -f "$file" \
 	|| func_fatal_help "\`$file' is not a file"
 
       dir=
       case $file in
       *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
 	  || func_fatal_help "\`$lib' is not a valid libtool archive"
@@ -1671,7 +2554,7 @@
 	dir="$func_dirname_result"
 
 	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
+	  func_append dir "/$objdir"
 	else
 	  if test ! -f "$dir/$dlname"; then
 	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
@@ -1712,7 +2595,7 @@
     for file
     do
       case $file in
-      -*) ;;
+      -* | *.la | *.lo ) ;;
       *)
 	# Do a test to see if this is really a libtool program.
 	if func_ltwrapper_script_p "$file"; then
@@ -1728,8 +2611,7 @@
 	;;
       esac
       # Quote arguments (to preserve shell metacharacters).
-      func_quote_for_eval "$file"
-      args="$args $func_quote_for_eval_result"
+      func_append_quoted args "$file"
     done
 
     if test "X$opt_dry_run" = Xfalse; then
@@ -1754,29 +2636,66 @@
       # Display what would be done.
       if test -n "$shlibpath_var"; then
 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	$ECHO "export $shlibpath_var"
+	echo "export $shlibpath_var"
       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
     fi
 }
 
-test "$mode" = execute && func_mode_execute ${1+"$@"}
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
 
 
 # func_mode_finish arg...
 func_mode_finish ()
 {
     $opt_debug
-    libdirs="$nonopt"
+    libs=
+    libdirs=
     admincmds=
 
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
 
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "\`$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument \`$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
       for libdir in $libdirs; do
 	if test -n "$finish_cmds"; then
 	  # Do each command in the finish commands.
@@ -1786,7 +2705,7 @@
 	if test -n "$finish_eval"; then
 	  # Do the single finish_eval.
 	  eval cmds=\"$finish_eval\"
-	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
        $cmds"
 	fi
       done
@@ -1795,53 +2714,55 @@
     # Exit here if they wanted silent mode.
     $opt_silent && exit $EXIT_SUCCESS
 
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
-    $ECHO "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $ECHO "   $libdir"
-    done
-    $ECHO
-    $ECHO "If you ever happen to want to link against installed libraries"
-    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
-    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $ECHO "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $ECHO "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $ECHO "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
 
-      $ECHO "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $ECHO "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $ECHO
+	$ECHO "   - use the \`$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      fi
+      echo
 
-    $ECHO "See any operating system documentation about shared libraries for"
-    case $host in
-      solaris2.[6789]|solaris2.1[0-9])
-        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-	$ECHO "pages."
-	;;
-      *)
-        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
-        ;;
-    esac
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
     exit $EXIT_SUCCESS
 }
 
-test "$mode" = finish && func_mode_finish ${1+"$@"}
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
 
 
 # func_mode_install arg...
@@ -1852,7 +2773,7 @@
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+       case $nonopt in *shtool*) :;; *) false;; esac; then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -1866,7 +2787,12 @@
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     func_quote_for_eval "$arg"
-    install_prog="$install_prog$func_quote_for_eval_result"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
 
     # We need to accept at least all the BSD install flags.
     dest=
@@ -1876,10 +2802,12 @@
     install_type=
     isdir=no
     stripme=
+    no_mode=:
     for arg
     do
+      arg2=
       if test -n "$dest"; then
-	files="$files $dest"
+	func_append files " $dest"
 	dest=$arg
 	continue
       fi
@@ -1887,10 +2815,9 @@
       case $arg in
       -d) isdir=yes ;;
       -f)
-	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
 	;;
       -g | -m | -o)
 	prev=$arg
@@ -1904,6 +2831,10 @@
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
+	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
 	  prev=
 	else
 	  dest=$arg
@@ -1914,7 +2845,11 @@
 
       # Aesthetically quote the argument.
       func_quote_for_eval "$arg"
-      install_prog="$install_prog $func_quote_for_eval_result"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
     done
 
     test -z "$install_prog" && \
@@ -1923,6 +2858,13 @@
     test -n "$prev" && \
       func_fatal_help "the \`$prev' option requires an argument"
 
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
     if test -z "$files"; then
       if test -z "$dest"; then
 	func_fatal_help "no file or destination specified"
@@ -1977,10 +2919,13 @@
       case $file in
       *.$libext)
 	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
+	func_append staticlibs " $file"
 	;;
 
       *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
 	# Check to see that this really is a libtool archive.
 	func_lalib_unsafe_p "$file" \
 	  || func_fatal_help "\`$file' is not a valid libtool archive"
@@ -1994,23 +2939,23 @@
 	if test "X$destdir" = "X$libdir"; then
 	  case "$current_libdirs " in
 	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  *) func_append current_libdirs " $libdir" ;;
 	  esac
 	else
 	  # Note the libdir as a future libdir.
 	  case "$future_libdirs " in
 	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  *) func_append future_libdirs " $libdir" ;;
 	  esac
 	fi
 
 	func_dirname "$file" "/" ""
 	dir="$func_dirname_result"
-	dir="$dir$objdir"
+	func_append dir "$objdir"
 
 	if test -n "$relink_command"; then
 	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
 
 	  # Don't allow the user to place us outside of our expected
 	  # location b/c this prevents finding dependent libraries that
@@ -2023,9 +2968,9 @@
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
 	  else
-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
 	  fi
 
 	  func_warning "relinking \`$file'"
@@ -2043,7 +2988,7 @@
 	  test -n "$relink_command" && srcname="$realname"T
 
 	  # Install the shared library and build the symlinks.
-	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
 	      'exit $?'
 	  tstripme="$stripme"
 	  case $host_os in
@@ -2083,7 +3028,7 @@
 	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
 	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
 	;;
 
       *.lo)
@@ -2183,7 +3128,7 @@
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
-	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
 	    if test -n "$libdir" && test ! -f "$libfile"; then
 	      func_warning "\`$lib' has not been installed in \`$libdir'"
 	      finalize=no
@@ -2202,7 +3147,7 @@
 		file="$func_basename_result"
 	        outputname="$tmpdir/$file"
 	        # Replace the output file specification.
-	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
 
 	        $opt_silent || {
 	          func_quote_for_expand "$relink_command"
@@ -2221,7 +3166,7 @@
 	    }
 	  else
 	    # Install the binary that we compiled earlier.
-	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
 	  fi
 	fi
 
@@ -2257,11 +3202,13 @@
 
       # Set up the ranlib parameters.
       oldlib="$destdir/$name"
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
 
       func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
 
       if test -n "$stripme" && test -n "$old_striplib"; then
-	func_show_eval "$old_striplib $oldlib" 'exit $?'
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
       fi
 
       # Do each command in the postinstall commands.
@@ -2280,7 +3227,7 @@
     fi
 }
 
-test "$mode" = install && func_mode_install ${1+"$@"}
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
 
 
 # func_generate_dlsyms outputname originator pic_p
@@ -2323,6 +3270,22 @@
 extern \"C\" {
 #endif
 
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
 /* External symbol declarations for the compiler. */\
 "
 
@@ -2332,10 +3295,11 @@
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
 	  # Add our own program objects to the symbol list.
-	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
-	    func_verbose "extracting global C symbols from \`$progfile'"
-	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
 	  done
 
 	  if test -n "$exclude_expsyms"; then
@@ -2371,7 +3335,7 @@
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
-	        *cygwin | *mingw* | *cegcc* )
+	        *cygwin* | *mingw* | *cegcc* )
 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
 	          ;;
@@ -2384,10 +3348,52 @@
 	  func_verbose "extracting global C symbols from \`$dlprefile'"
 	  func_basename "$dlprefile"
 	  name="$func_basename_result"
-	  $opt_dry_run || {
-	    eval '$ECHO ": $name " >> "$nlist"'
-	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
-	  }
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=""
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname" ; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename="$func_basename_result"
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename" ; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
 	done
 
 	$opt_dry_run || {
@@ -2415,36 +3421,19 @@
 	  if test -f "$nlist"S; then
 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
 	  else
-	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+	  echo >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
 typedef struct {
   const char *name;
   void *address;
 } lt_dlsymlist;
-"
-	  case $host in
-	  *cygwin* | *mingw* | *cegcc* )
-	    $ECHO >> "$output_objdir/$my_dlsyms" "\
-/* DATA imports from DLLs on WIN32 con't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs.  */"
-	    lt_dlsym_const= ;;
-	  *osf5*)
-	    echo >> "$output_objdir/$my_dlsyms" "\
-/* This system does not cope well with relocations in const data */"
-	    lt_dlsym_const= ;;
-	  *)
-	    lt_dlsym_const=const ;;
-	  esac
-
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
-extern $lt_dlsym_const lt_dlsymlist
+extern LT_DLSYM_CONST lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[];
-$lt_dlsym_const lt_dlsymlist
+LT_DLSYM_CONST lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[] =
 {\
   { \"$my_originator\", (void *) 0 },"
@@ -2457,7 +3446,7 @@
 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
 	    ;;
 	  esac
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+	  echo >> "$output_objdir/$my_dlsyms" "\
   {0, (void *) 0}
 };
 
@@ -2484,7 +3473,7 @@
 	  # linked before any other PIC object.  But we must not use
 	  # pic_flag when linking with -static.  The problem exists in
 	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
 	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
 	  *-*-hpux*)
 	    pic_flag_for_symtable=" $pic_flag"  ;;
@@ -2500,7 +3489,7 @@
 	for arg in $LTCFLAGS; do
 	  case $arg in
 	  -pie | -fpie | -fPIE) ;;
-	  *) symtab_cflags="$symtab_cflags $arg" ;;
+	  *) func_append symtab_cflags " $arg" ;;
 	  esac
 	done
 
@@ -2515,16 +3504,16 @@
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 	  else
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
 	  fi
 	  ;;
 	*)
-	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
 	  ;;
 	esac
 	;;
@@ -2538,8 +3527,8 @@
       # really was required.
 
       # Nullify the symbol file.
-      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
     fi
 }
 
@@ -2549,6 +3538,7 @@
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
   $opt_debug
@@ -2559,9 +3549,11 @@
     win32_libid_type="x86 archive import"
     ;;
   *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      func_to_tool_file "$1" func_convert_file_msys_to_w32
+      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
 	$SED -n -e '
 	    1,100{
 		/ I /{
@@ -2590,6 +3582,131 @@
   $ECHO "$win32_libid_type"
 }
 
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $opt_debug
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $opt_debug
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive which possess that section. Heuristic: eliminate
+    # all those which have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $opt_debug
+  if func_cygming_gnu_implib_p "$1" ; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1" ; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=""
+  fi
+}
 
 
 # func_extract_an_archive dir oldlib
@@ -2598,7 +3715,18 @@
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+    if test "$lock_old_archive_extraction" = yes; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test "$lock_old_archive_extraction" = yes; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
@@ -2669,7 +3797,7 @@
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
 	      $LIPO -create -output "$darwin_file" $darwin_files
 	    done # $darwin_filelist
 	    $RM -rf unfat-$$
@@ -2684,25 +3812,30 @@
         func_extract_an_archive "$my_xdir" "$my_xabs"
 	;;
       esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 
-
-# func_emit_wrapper_part1 [arg=no]
+# func_emit_wrapper [arg=no]
 #
-# Emit the first part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part1 ()
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
 {
-	func_emit_wrapper_part1_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_part1_arg1=$1
-	fi
+	func_emit_wrapper_arg1=${1-no}
 
 	$ECHO "\
 #! $SHELL
@@ -2718,7 +3851,6 @@
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
@@ -2749,31 +3881,135 @@
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    ECHO=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$ECHO will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
 "
-	$ECHO "\
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
 
   # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
@@ -2783,30 +4019,13 @@
       esac
     fi
 
-    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
   done
-"
-}
-# end: func_emit_wrapper_part1
-
-# func_emit_wrapper_part2 [arg=no]
-#
-# Emit the second part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part2 ()
-{
-	func_emit_wrapper_part2_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_part2_arg1=$1
-	fi
-
-	$ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
@@ -2814,7 +4033,7 @@
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
     $objdir )   thisdir=. ;;
     esac
   fi
@@ -2869,6 +4088,18 @@
 
   if test -f \"\$progdir/\$program\"; then"
 
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
 	# Export our shlibpath_var if we have one.
 	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
 	  $ECHO "\
@@ -2877,254 +4108,29 @@
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
 
     export $shlibpath_var
 "
 	fi
 
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $ECHO "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
 	$ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2* | *-cegcc*)
-	  $ECHO "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $ECHO "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
+      func_exec_program \${1+\"\$@\"}
     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
   fi
 fi\
 "
 }
-# end: func_emit_wrapper_part2
 
 
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
-	func_emit_wrapper_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_arg1=$1
-	fi
-
-	# split this up so that func_emit_cwrapperexe_src
-	# can call each part independently.
-	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
-	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
-}
-
-
-# func_to_host_path arg
-#
-# Convert paths to host format when used with build tools.
-# Intended for use with "native" mingw (where libtool itself
-# is running under the msys shell), or in the following cross-
-# build environments:
-#    $build          $host
-#    mingw (msys)    mingw  [e.g. native]
-#    cygwin          mingw
-#    *nix + wine     mingw
-# where wine is equipped with the `winepath' executable.
-# In the native mingw case, the (msys) shell automatically
-# converts paths for any non-msys applications it launches,
-# but that facility isn't available from inside the cwrapper.
-# Similar accommodations are necessary for $host mingw and
-# $build cygwin.  Calling this function does no harm for other
-# $host/$build combinations not listed above.
-#
-# ARG is the path (on $build) that should be converted to
-# the proper representation for $host. The result is stored
-# in $func_to_host_path_result.
-func_to_host_path ()
-{
-  func_to_host_path_result="$1"
-  if test -n "$1" ; then
-    case $host in
-      *mingw* )
-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-        case $build in
-          *mingw* ) # actually, msys
-            # awkward: cmd appends spaces to result
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          *cygwin* )
-            func_to_host_path_tmp1=`cygpath -w "$1"`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          * )
-            # Unfortunately, winepath does not exit with a non-zero
-            # error code, so we are forced to check the contents of
-            # stdout. On the other hand, if the command is not
-            # found, the shell will set an exit code of 127 and print
-            # *an error message* to stdout. So we must check for both
-            # error code of zero AND non-empty stdout, which explains
-            # the odd construction:
-            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
-            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
-              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-                $SED -e "$lt_sed_naive_backslashify"`
-            else
-              # Allow warning below.
-              func_to_host_path_result=""
-            fi
-            ;;
-        esac
-        if test -z "$func_to_host_path_result" ; then
-          func_error "Could not determine host path corresponding to"
-          func_error "  '$1'"
-          func_error "Continuing, but uninstalled executables may not work."
-          # Fallback:
-          func_to_host_path_result="$1"
-        fi
-        ;;
-    esac
-  fi
-}
-# end: func_to_host_path
-
-# func_to_host_pathlist arg
-#
-# Convert pathlists to host format when used with build tools.
-# See func_to_host_path(), above. This function supports the
-# following $build/$host combinations (but does no harm for
-# combinations not listed here):
-#    $build          $host
-#    mingw (msys)    mingw  [e.g. native]
-#    cygwin          mingw
-#    *nix + wine     mingw
-#
-# Path separators are also converted from $build format to
-# $host format. If ARG begins or ends with a path separator
-# character, it is preserved (but converted to $host format)
-# on output.
-#
-# ARG is a pathlist (on $build) that should be converted to
-# the proper representation on $host. The result is stored
-# in $func_to_host_pathlist_result.
-func_to_host_pathlist ()
-{
-  func_to_host_pathlist_result="$1"
-  if test -n "$1" ; then
-    case $host in
-      *mingw* )
-        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-        # Remove leading and trailing path separator characters from
-        # ARG. msys behavior is inconsistent here, cygpath turns them
-        # into '.;' and ';.', and winepath ignores them completely.
-        func_to_host_pathlist_tmp2="$1"
-        # Once set for this call, this variable should not be
-        # reassigned. It is used in tha fallback case.
-        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
-          $SED -e 's|^:*||' -e 's|:*$||'`
-        case $build in
-          *mingw* ) # Actually, msys.
-            # Awkward: cmd appends spaces to result.
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          *cygwin* )
-            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-              $SED -e "$lt_sed_naive_backslashify"`
-            ;;
-          * )
-            # unfortunately, winepath doesn't convert pathlists
-            func_to_host_pathlist_result=""
-            func_to_host_pathlist_oldIFS=$IFS
-            IFS=:
-            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
-              IFS=$func_to_host_pathlist_oldIFS
-              if test -n "$func_to_host_pathlist_f" ; then
-                func_to_host_path "$func_to_host_pathlist_f"
-                if test -n "$func_to_host_path_result" ; then
-                  if test -z "$func_to_host_pathlist_result" ; then
-                    func_to_host_pathlist_result="$func_to_host_path_result"
-                  else
-                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
-                  fi
-                fi
-              fi
-              IFS=:
-            done
-            IFS=$func_to_host_pathlist_oldIFS
-            ;;
-        esac
-        if test -z "$func_to_host_pathlist_result" ; then
-          func_error "Could not determine the host path(s) corresponding to"
-          func_error "  '$1'"
-          func_error "Continuing, but uninstalled executables may not work."
-          # Fallback. This may break if $1 contains DOS-style drive
-          # specifications. The fix is not to complicate the expression
-          # below, but for the user to provide a working wine installation
-          # with winepath so that path translation in the cross-to-mingw
-          # case works properly.
-          lt_replace_pathsep_nix_to_dos="s|:|;|g"
-          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
-            $SED -e "$lt_replace_pathsep_nix_to_dos"`
-        fi
-        # Now, add the leading and trailing path separators back
-        case "$1" in
-          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
-            ;;
-        esac
-        case "$1" in
-          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
-            ;;
-        esac
-        ;;
-    esac
-  fi
-}
-# end: func_to_host_pathlist
-
 # func_emit_cwrapperexe_src
 # emit the source code for a wrapper executable on stdout
 # Must ONLY be called from within func_mode_link because
@@ -3141,31 +4147,23 @@
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "$SHELL $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
 */
 EOF
 	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
-# define setmode _setmode
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
-#  define HAVE_SETENV
-#  ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-#  endif
 # endif
 #endif
 #include <malloc.h>
@@ -3177,6 +4175,44 @@
 #include <fcntl.h>
 #include <sys/stat.h>
 
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
@@ -3192,14 +4228,7 @@
 # define S_IXGRP 0
 #endif
 
-#ifdef _MSC_VER
-# define S_IXUSR _S_IEXEC
-# define stat _stat
-# ifndef _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#endif
-
+/* path handling portability macros */
 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
@@ -3230,10 +4259,6 @@
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
-#ifdef __CYGWIN__
-# define FOPEN_WB "wb"
-#endif
-
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
@@ -3246,22 +4271,13 @@
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
-#undef LTWRAPPER_DEBUGPRINTF
-#if defined DEBUGWRAPPER
-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
-static void
-ltwrapper_debugprintf (const char *fmt, ...)
-{
-    va_list args;
-    va_start (args, fmt);
-    (void) vfprintf (stderr, fmt, args);
-    va_end (args);
-}
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
 #else
-# define LTWRAPPER_DEBUGPRINTF(args)
+static int lt_debug = 0;
 #endif
 
-const char *program_name = NULL;
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
@@ -3271,41 +4287,27 @@
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
-void lt_fatal (const char *message, ...);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_opt_process_env_set (const char *arg);
-void lt_opt_process_env_prepend (const char *arg);
-void lt_opt_process_env_append (const char *arg);
-int lt_split_name_value (const char *arg, char** name, char** value);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);
-
-static const char *script_text_part1 =
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
 EOF
 
-	    func_emit_wrapper_part1 yes |
-	        $SED -e 's/\([\\"]\)/\\\1/g' \
-	             -e 's/^/  "/' -e 's/$/\\n"/'
-	    echo ";"
 	    cat <<EOF
-
-static const char *script_text_part2 =
-EOF
-	    func_emit_wrapper_part2 yes |
-	        $SED -e 's/\([\\"]\)/\\\1/g' \
-	             -e 's/^/  "/' -e 's/$/\\n"/'
-	    echo ";"
-
-	    cat <<EOF
-const char * MAGIC_EXE = "$magic_exe";
+volatile const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
 EOF
 
 	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-              func_to_host_pathlist "$temp_rpath"
+              func_to_host_path "$temp_rpath"
 	      cat <<EOF
-const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
 EOF
 	    else
 	      cat <<"EOF"
@@ -3314,10 +4316,10 @@
 	    fi
 
 	    if test -n "$dllsearchpath"; then
-              func_to_host_pathlist "$dllsearchpath:"
+              func_to_host_path "$dllsearchpath:"
 	      cat <<EOF
 const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
 EOF
 	    else
 	      cat <<"EOF"
@@ -3340,24 +4342,10 @@
 	    cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
-#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
-static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-
-static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
-static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
-  /* argument is putenv-style "foo=bar", value of foo is set to bar */
-
-static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
-static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
-  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
-
-static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
-static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
-  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
 
 int
 main (int argc, char *argv[])
@@ -3374,10 +4362,13 @@
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+  newargz = XMALLOC (char *, argc + 1);
 
-  /* very simple arg parsing; don't want to rely on getopt */
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
@@ -3391,25 +4382,57 @@
 	      esac
 
 	    cat <<"EOF"
-	  printf ("%s", script_text_part1);
-	  printf ("%s", script_text_part2);
+	  lt_dump_script (stdout);
 	  return 0;
 	}
+      if (strcmp (argv[i], debug_opt) == 0)
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
     }
+  newargz[++newargc] = NULL;
 
-  newargz = XMALLOC (char *, argc + 1);
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
-    lt_fatal ("Couldn't find %s", argv[0]);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
-			  tmp_pathspec));
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
-			  actual_cwrapper_path));
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
   XFREE (tmp_pathspec);
 
-  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
@@ -3427,8 +4450,9 @@
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 
-  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
-			  target_name));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
 EOF
 
 	    cat <<EOF
@@ -3478,80 +4502,19 @@
 
   lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
   lt_setenv ("DUALCASE", "1");  /* for MSK sh */
-  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
 
-  newargc=0;
-  for (i = 1; i < argc; i++)
-    {
-      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
-        {
-          if (argv[i][env_set_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_set_opt_len + 1;
-              lt_opt_process_env_set (p);
-            }
-          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_set (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_set_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
-        {
-          if (argv[i][env_prepend_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_prepend_opt_len + 1;
-              lt_opt_process_env_prepend (p);
-            }
-          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_prepend_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
-        {
-          if (argv[i][env_append_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_append_opt_len + 1;
-              lt_opt_process_env_append (p);
-            }
-          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_append (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_append_opt);
-          continue;
-        }
-      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal ("Unrecognized option in %s namespace: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
-    }
-  newargz[++newargc] = NULL;
-
-  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
   for (i = 0; i < newargc; i++)
     {
-      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
     }
 
 EOF
@@ -3560,11 +4523,14 @@
 	      mingw*)
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
-      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
       return 127;
     }
   return rval;
@@ -3586,7 +4552,7 @@
 {
   void *p = (void *) malloc (num);
   if (!p)
-    lt_fatal ("Memory exhausted");
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
 
   return p;
 }
@@ -3620,8 +4586,8 @@
 {
   struct stat st;
 
-  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
   if ((!path) || (!*path))
     return 0;
 
@@ -3638,8 +4604,8 @@
   int rval = 0;
   struct stat st;
 
-  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
   if ((!path) || (!*path))
     return 0;
 
@@ -3665,8 +4631,8 @@
   int tmp_len;
   char *concat_name;
 
-  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
-			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
@@ -3719,7 +4685,8 @@
 		{
 		  /* empty path: current directory */
 		  if (getcwd (tmp, LT_PATHMAX) == NULL)
-		    lt_fatal ("getcwd failed");
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
 		  tmp_len = strlen (tmp);
 		  concat_name =
 		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -3744,7 +4711,8 @@
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
@@ -3770,8 +4738,9 @@
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {
-      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
-			      tmp_pathspec));
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
       if (lstat (tmp_pathspec, &s) == 0)
 	{
 	  if (S_ISLNK (s.st_mode) != 0)
@@ -3793,8 +4762,9 @@
 	}
       else
 	{
-	  char *errstr = strerror (errno);
-	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
 	}
     }
   XFREE (tmp_pathspec);
@@ -3807,7 +4777,8 @@
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {
-      lt_fatal ("Could not follow symlinks for %s", pathspec);
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
     }
   return xstrdup (tmp_pathspec);
 #endif
@@ -3833,11 +4804,25 @@
   return str;
 }
 
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
 static void
-lt_error_core (int exit_status, const char *mode,
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
 	       const char *message, va_list ap)
 {
-  fprintf (stderr, "%s: %s: ", program_name, mode);
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
@@ -3846,20 +4831,32 @@
 }
 
 void
-lt_fatal (const char *message, ...)
+lt_fatal (const char *file, int line, const char *message, ...)
 {
   va_list ap;
   va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
   va_end (ap);
 }
 
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
 void
 lt_setenv (const char *name, const char *value)
 {
-  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
@@ -3904,95 +4901,12 @@
   return new_value;
 }
 
-int
-lt_split_name_value (const char *arg, char** name, char** value)
-{
-  const char *p;
-  int len;
-  if (!arg || !*arg)
-    return 1;
-
-  p = strchr (arg, (int)'=');
-
-  if (!p)
-    return 1;
-
-  *value = xstrdup (++p);
-
-  len = strlen (arg) - strlen (*value);
-  *name = XMALLOC (char, len);
-  strncpy (*name, arg, len-1);
-  (*name)[len - 1] = '\0';
-
-  return 0;
-}
-
-void
-lt_opt_process_env_set (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
-    }
-
-  lt_setenv (name, value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_prepend (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 0);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_append (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 1);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
 void
 lt_update_exe_path (const char *name, const char *value)
 {
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
 
   if (name && *name && value && *value)
     {
@@ -4011,9 +4925,9 @@
 void
 lt_update_lib_path (const char *name, const char *value)
 {
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
 
   if (name && *name && value && *value)
     {
@@ -4023,11 +4937,158 @@
     }
 }
 
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
 
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
 EOF
 }
 # end: func_emit_cwrapperexe_src
 
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $opt_debug
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
 # func_mode_link arg...
 func_mode_link ()
 {
@@ -4072,6 +5133,7 @@
     new_inherited_linker_flags=
 
     avoid_version=no
+    bindir=
     dlfiles=
     dlprefiles=
     dlself=no
@@ -4164,6 +5226,11 @@
 	esac
 
 	case $prev in
+	bindir)
+	  bindir="$arg"
+	  prev=
+	  continue
+	  ;;
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
@@ -4195,9 +5262,9 @@
 	    ;;
 	  *)
 	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
+	      func_append dlfiles " $arg"
 	    else
-	      dlprefiles="$dlprefiles $arg"
+	      func_append dlprefiles " $arg"
 	    fi
 	    prev=
 	    continue
@@ -4221,7 +5288,7 @@
 	    *-*-darwin*)
 	      case "$deplibs " in
 		*" $qarg.ltframework "*) ;;
-		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
 		   ;;
 	      esac
 	      ;;
@@ -4240,7 +5307,7 @@
 	    moreargs=
 	    for fil in `cat "$save_arg"`
 	    do
-#	      moreargs="$moreargs $fil"
+#	      func_append moreargs " $fil"
 	      arg=$fil
 	      # A libtool-controlled object.
 
@@ -4269,7 +5336,7 @@
 
 		  if test "$prev" = dlfiles; then
 		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
+		      func_append dlfiles " $pic_object"
 		      prev=
 		      continue
 		    else
@@ -4281,7 +5348,7 @@
 		  # CHECK ME:  I think I busted this.  -Ossama
 		  if test "$prev" = dlprefiles; then
 		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
+		    func_append dlprefiles " $pic_object"
 		    prev=
 		  fi
 
@@ -4351,12 +5418,12 @@
 	  if test "$prev" = rpath; then
 	    case "$rpath " in
 	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
+	    *) func_append rpath " $arg" ;;
 	    esac
 	  else
 	    case "$xrpath " in
 	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
+	    *) func_append xrpath " $arg" ;;
 	    esac
 	  fi
 	  prev=
@@ -4368,28 +5435,28 @@
 	  continue
 	  ;;
 	weak)
-	  weak_libs="$weak_libs $arg"
+	  func_append weak_libs " $arg"
 	  prev=
 	  continue
 	  ;;
 	xcclinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $qarg"
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
 	  prev=
 	  func_append compile_command " $qarg"
 	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
 	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
+	  func_append compiler_flags " $qarg"
 	  prev=
 	  func_append compile_command " $qarg"
 	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
 	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
 	  prev=
 	  func_append compile_command " $wl$qarg"
 	  func_append finalize_command " $wl$qarg"
@@ -4425,6 +5492,11 @@
 	continue
 	;;
 
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
       -dlopen)
 	prev=dlfiles
 	continue
@@ -4475,15 +5547,16 @@
 	;;
 
       -L*)
-	func_stripname '-L' '' "$arg"
-	dir=$func_stripname_result
-	if test -z "$dir"; then
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
 	  if test "$#" -gt 0; then
 	    func_fatal_error "require no space between \`-L' and \`$1'"
 	  else
 	    func_fatal_error "need path for \`-L' option"
 	  fi
 	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -4495,24 +5568,30 @@
 	  ;;
 	esac
 	case "$deplibs " in
-	*" -L$dir "*) ;;
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
 	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
 	  ;;
 	esac
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
 	  ::) dllsearchpath=$dir;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  *) func_append dllsearchpath ":$dir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
 	  ::) dllsearchpath=$testbindir;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  *) func_append dllsearchpath ":$testbindir";;
 	  esac
 	  ;;
 	esac
@@ -4522,7 +5601,7 @@
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -4536,7 +5615,7 @@
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs System.ltframework"
+	    func_append deplibs " System.ltframework"
 	    continue
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
@@ -4556,7 +5635,7 @@
 	   ;;
 	 esac
 	fi
-	deplibs="$deplibs $arg"
+	func_append deplibs " $arg"
 	continue
 	;;
 
@@ -4568,21 +5647,22 @@
       # Tru64 UNIX uses -model [arg] to determine the layout of C++
       # classes, name mangling, and exception handling.
       # Darwin uses the -arch flag to determine output architecture.
-      -model|-arch|-isysroot)
-	compiler_flags="$compiler_flags $arg"
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"
 	prev=xcompiler
 	continue
 	;;
 
-      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-	compiler_flags="$compiler_flags $arg"
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
 	func_append compile_command " $arg"
 	func_append finalize_command " $arg"
 	case "$new_inherited_linker_flags " in
 	    *" $arg "*) ;;
-	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
 	esac
 	continue
 	;;
@@ -4649,13 +5729,17 @@
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
 	*)
 	  func_fatal_error "only absolute run-paths are allowed"
 	  ;;
 	esac
 	case "$xrpath " in
 	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
+	*) func_append xrpath " $dir" ;;
 	esac
 	continue
 	;;
@@ -4708,8 +5792,8 @@
 	for flag in $args; do
 	  IFS="$save_ifs"
           func_quote_for_eval "$flag"
-	  arg="$arg $wl$func_quote_for_eval_result"
-	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
 	func_stripname ' ' '' "$arg"
@@ -4724,9 +5808,9 @@
 	for flag in $args; do
 	  IFS="$save_ifs"
           func_quote_for_eval "$flag"
-	  arg="$arg $wl$func_quote_for_eval_result"
-	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
-	  linker_flags="$linker_flags $func_quote_for_eval_result"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
 	func_stripname ' ' '' "$arg"
@@ -4754,23 +5838,27 @@
 	arg="$func_quote_for_eval_result"
 	;;
 
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -F/path gives path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-      # @file GCC response files
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
         func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"
         func_append compile_command " $arg"
         func_append finalize_command " $arg"
-        compiler_flags="$compiler_flags $arg"
+        func_append compiler_flags " $arg"
         continue
         ;;
 
@@ -4782,7 +5870,7 @@
 
       *.$objext)
 	# A standard object.
-	objs="$objs $arg"
+	func_append objs " $arg"
 	;;
 
       *.lo)
@@ -4813,7 +5901,7 @@
 
 	    if test "$prev" = dlfiles; then
 	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		dlfiles="$dlfiles $pic_object"
+		func_append dlfiles " $pic_object"
 		prev=
 		continue
 	      else
@@ -4825,7 +5913,7 @@
 	    # CHECK ME:  I think I busted this.  -Ossama
 	    if test "$prev" = dlprefiles; then
 	      # Preload the old-style object.
-	      dlprefiles="$dlprefiles $pic_object"
+	      func_append dlprefiles " $pic_object"
 	      prev=
 	    fi
 
@@ -4870,24 +5958,25 @@
 
       *.$libext)
 	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
 	continue
 	;;
 
       *.la)
 	# A libtool-controlled library.
 
+	func_resolve_sysroot "$arg"
 	if test "$prev" = dlfiles; then
 	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
+	  func_append dlfiles " $func_resolve_sysroot_result"
 	  prev=
 	elif test "$prev" = dlprefiles; then
 	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
+	  func_append dlprefiles " $func_resolve_sysroot_result"
 	  prev=
 	else
-	  deplibs="$deplibs $arg"
+	  func_append deplibs " $func_resolve_sysroot_result"
 	fi
 	continue
 	;;
@@ -4925,7 +6014,7 @@
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
@@ -4934,6 +6023,8 @@
 
     func_dirname "$output" "/" ""
     output_objdir="$func_dirname_result$objdir"
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
     # Create the object directory.
     func_mkdir_p "$output_objdir"
 
@@ -4954,12 +6045,12 @@
     # Find all interdependent deplibs by searching for libraries
     # that are linked more than once (e.g. -la -lb -la)
     for deplib in $deplibs; do
-      if $opt_duplicate_deps ; then
+      if $opt_preserve_dup_deps ; then
 	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	esac
       fi
-      libs="$libs $deplib"
+      func_append libs " $deplib"
     done
 
     if test "$linkmode" = lib; then
@@ -4972,9 +6063,9 @@
       if $opt_duplicate_compiler_generated_deps; then
 	for pre_post_dep in $predeps $postdeps; do
 	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
 	  esac
-	  pre_post_deps="$pre_post_deps $pre_post_dep"
+	  func_append pre_post_deps " $pre_post_dep"
 	done
       fi
       pre_post_deps=
@@ -5044,17 +6135,19 @@
 	for lib in $dlprefiles; do
 	  # Ignore non-libtool-libs
 	  dependency_libs=
+	  func_resolve_sysroot "$lib"
 	  case $lib in
-	  *.la)	func_source "$lib" ;;
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
 	  esac
 
 	  # Collect preopened libtool deplibs, except any this library
 	  # has declared as weak libs
 	  for deplib in $dependency_libs; do
-            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
 	    case " $weak_libs " in
 	    *" $deplib_base "*) ;;
-	    *) deplibs="$deplibs $deplib" ;;
+	    *) func_append deplibs " $deplib" ;;
 	    esac
 	  done
 	done
@@ -5070,16 +6163,17 @@
 	lib=
 	found=no
 	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
-	    compiler_flags="$compiler_flags $deplib"
+	    func_append compiler_flags " $deplib"
 	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
 		esac
 	    fi
 	  fi
@@ -5164,7 +6258,7 @@
 	    if test "$linkmode" = lib ; then
 		case "$new_inherited_linker_flags " in
 		    *" $deplib "*) ;;
-		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
 		esac
 	    fi
 	  fi
@@ -5177,7 +6271,8 @@
 	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"
 	    func_stripname '-L' '' "$deplib"
-	    newlib_search_path="$newlib_search_path $func_stripname_result"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  prog)
 	    if test "$pass" = conv; then
@@ -5191,7 +6286,8 @@
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
 	    func_stripname '-L' '' "$deplib"
-	    newlib_search_path="$newlib_search_path $func_stripname_result"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
 	    ;;
 	  *)
 	    func_warning "\`-L' is ignored for archives/objects"
@@ -5202,17 +6298,21 @@
 	-R*)
 	  if test "$pass" = link; then
 	    func_stripname '-R' '' "$deplib"
-	    dir=$func_stripname_result
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
 	    # Make sure the xrpath contains only unique directories.
 	    case "$xrpath " in
 	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
+	    *) func_append xrpath " $dir" ;;
 	    esac
 	  fi
 	  deplibs="$deplib $deplibs"
 	  continue
 	  ;;
-	*.la) lib="$deplib" ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
 	*.$libext)
 	  if test "$pass" = conv; then
 	    deplibs="$deplib $deplibs"
@@ -5230,7 +6330,7 @@
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
 		    valid_a_lib=yes
 		  fi
@@ -5240,15 +6340,15 @@
 		;;
 	      esac
 	      if test "$valid_a_lib" != yes; then
-		$ECHO
+		echo
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
-		$ECHO "*** that it is just a static archive that I should not use here."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
 	      else
-		$ECHO
+		echo
 		$ECHO "*** Warning: Linking the shared library $output against the"
 		$ECHO "*** static library $deplib is not portable!"
 		deplibs="$deplib $deplibs"
@@ -5275,11 +6375,11 @@
 	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
 	      # If there is no dlopen support or we're linking statically,
 	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
+	      func_append newdlprefiles " $deplib"
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    else
-	      newdlfiles="$newdlfiles $deplib"
+	      func_append newdlfiles " $deplib"
 	    fi
 	  fi
 	  continue
@@ -5321,20 +6421,20 @@
 
 	# Convert "-framework foo" to "foo.ltframework"
 	if test -n "$inherited_linker_flags"; then
-	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
 	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
 	    case " $new_inherited_linker_flags " in
 	      *" $tmp_inherited_linker_flag "*) ;;
-	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
 	    esac
 	  done
 	fi
-	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
 	fi
 
 	if test "$pass" = conv; then
@@ -5345,17 +6445,17 @@
 	      func_fatal_error "cannot find name of link library for \`$lib'"
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
 	    tmp_libs=
 	    for deplib in $dependency_libs; do
 	      deplibs="$deplib $deplibs"
-	      if $opt_duplicate_deps ; then
+	      if $opt_preserve_dup_deps ; then
 		case "$tmp_libs " in
-		*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+		*" $deplib "*) func_append specialdeplibs " $deplib" ;;
 		esac
 	      fi
-	      tmp_libs="$tmp_libs $deplib"
+	      func_append tmp_libs " $deplib"
 	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    func_fatal_error "\`$lib' is not a convenience library"
@@ -5366,9 +6466,15 @@
 
 	# Get the name of the library we link against.
 	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
+	if test -n "$old_library" &&
+	   { test "$prefer_static_libs" = yes ||
+	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib="$l"
+	  done
+	fi
 	if test -z "$linklib"; then
 	  func_fatal_error "cannot find name of link library for \`$lib'"
 	fi
@@ -5385,9 +6491,9 @@
 	    # statically, we need to preload.  We also need to preload any
 	    # dependent libraries so libltdl's deplib preloader doesn't
 	    # bomb out in the load deplibs phase.
-	    dlprefiles="$dlprefiles $lib $dependency_libs"
+	    func_append dlprefiles " $lib $dependency_libs"
 	  else
-	    newdlfiles="$newdlfiles $lib"
+	    func_append newdlfiles " $lib"
 	  fi
 	  continue
 	fi # $pass = dlopen
@@ -5409,14 +6515,14 @@
 
 	# Find the relevant object directory and library name.
 	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
 	    func_warning "library \`$lib' was moved."
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    libdir="$abs_ladir"
 	  else
-	    dir="$libdir"
-	    absdir="$libdir"
+	    dir="$lt_sysroot$libdir"
+	    absdir="$lt_sysroot$libdir"
 	  fi
 	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 	else
@@ -5424,12 +6530,12 @@
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
+	    func_append notinst_path " $abs_ladir"
 	  else
 	    dir="$ladir/$objdir"
 	    absdir="$abs_ladir/$objdir"
 	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
+	    func_append notinst_path " $abs_ladir"
 	  fi
 	fi # $installed = yes
 	func_stripname 'lib' '.la' "$laname"
@@ -5440,20 +6546,46 @@
 	  if test -z "$libdir" && test "$linkmode" = prog; then
 	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
 	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	    # Keep a list of preopened convenience libraries to check
-	    # that they are being used correctly in the link pass.
-	    test -z "$libdir" && \
-		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
-	  fi
+	  case "$host" in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
 	fi # $pass = dlpreopen
 
 	if test -z "$libdir"; then
@@ -5471,7 +6603,7 @@
 
 
 	if test "$linkmode" = prog && test "$pass" != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
+	  func_append newlib_search_path " $ladir"
 	  deplibs="$lib $deplibs"
 
 	  linkalldeplibs=no
@@ -5484,7 +6616,8 @@
 	  for deplib in $dependency_libs; do
 	    case $deplib in
 	    -L*) func_stripname '-L' '' "$deplib"
-	         newlib_search_path="$newlib_search_path $func_stripname_result"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
 		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
@@ -5495,12 +6628,12 @@
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if $opt_duplicate_deps ; then
+	    if $opt_preserve_dup_deps ; then
 	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
 	      esac
 	    fi
-	    tmp_libs="$tmp_libs $deplib"
+	    func_append tmp_libs " $deplib"
 	  done # for deplib
 	  continue
 	fi # $linkmode = prog...
@@ -5515,7 +6648,7 @@
 	      # Make sure the rpath contains only unique directories.
 	      case "$temp_rpath:" in
 	      *"$absdir:"*) ;;
-	      *) temp_rpath="$temp_rpath$absdir:" ;;
+	      *) func_append temp_rpath "$absdir:" ;;
 	      esac
 	    fi
 
@@ -5527,7 +6660,7 @@
 	    *)
 	      case "$compile_rpath " in
 	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
+	      *) func_append compile_rpath " $absdir" ;;
 	      esac
 	      ;;
 	    esac
@@ -5536,7 +6669,7 @@
 	    *)
 	      case "$finalize_rpath " in
 	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
+	      *) func_append finalize_rpath " $libdir" ;;
 	      esac
 	      ;;
 	    esac
@@ -5561,12 +6694,12 @@
 	  case $host in
 	  *cygwin* | *mingw* | *cegcc*)
 	      # No point in relinking DLLs because paths are not encoded
-	      notinst_deplibs="$notinst_deplibs $lib"
+	      func_append notinst_deplibs " $lib"
 	      need_relink=no
 	    ;;
 	  *)
 	    if test "$installed" = no; then
-	      notinst_deplibs="$notinst_deplibs $lib"
+	      func_append notinst_deplibs " $lib"
 	      need_relink=yes
 	    fi
 	    ;;
@@ -5583,7 +6716,7 @@
 	    fi
 	  done
 	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-	    $ECHO
+	    echo
 	    if test "$linkmode" = prog; then
 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
@@ -5601,7 +6734,7 @@
 	    *)
 	      case "$compile_rpath " in
 	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
+	      *) func_append compile_rpath " $absdir" ;;
 	      esac
 	      ;;
 	    esac
@@ -5610,7 +6743,7 @@
 	    *)
 	      case "$finalize_rpath " in
 	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
+	      *) func_append finalize_rpath " $libdir" ;;
 	      esac
 	      ;;
 	    esac
@@ -5664,7 +6797,7 @@
 	    linklib=$newlib
 	  fi # test -n "$old_archive_from_expsyms_cmds"
 
-	  if test "$linkmode" = prog || test "$mode" != relink; then
+	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
@@ -5686,9 +6819,9 @@
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
 			if test -z "$old_library" ; then
-			  $ECHO
-			  $ECHO "*** And there doesn't seem to be a static archive available"
-			  $ECHO "*** The link will probably fail, sorry"
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
 			else
 			  add="$dir/$old_library"
 			fi
@@ -5715,12 +6848,12 @@
 	         test "$hardcode_direct_absolute" = no; then
 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
+		add_dir="-L$absdir"
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 		  case $libdir in
 		    [\\/]*)
-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
 		      ;;
 		  esac
 		fi
@@ -5742,7 +6875,7 @@
 	    if test -n "$add_shlibpath"; then
 	      case :$compile_shlibpath: in
 	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
 	      esac
 	    fi
 	    if test "$linkmode" = prog; then
@@ -5756,13 +6889,13 @@
 		 test "$hardcode_shlibpath_var" = yes; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
 		esac
 	      fi
 	    fi
 	  fi
 
-	  if test "$linkmode" = prog || test "$mode" = relink; then
+	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
@@ -5776,7 +6909,7 @@
 	    elif test "$hardcode_shlibpath_var" = yes; then
 	      case :$finalize_shlibpath: in
 	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
 	      esac
 	      add="-l$name"
 	    elif test "$hardcode_automatic" = yes; then
@@ -5793,7 +6926,7 @@
 	      if test -n "$inst_prefix_dir"; then
 		case $libdir in
 		  [\\/]*)
-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
 		    ;;
 		esac
 	      fi
@@ -5828,21 +6961,21 @@
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    $ECHO
+	    echo
 	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
-	    $ECHO "*** I have the capability to make that library automatically link in when"
-	    $ECHO "*** you link to this library.  But I can only do this if you have a"
-	    $ECHO "*** shared version of the library, which you do not appear to have."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      $ECHO "*** But as you try to build a module library, libtool will still create "
-	      $ECHO "*** a static module, that should work as long as the dlopening application"
-	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		$ECHO
-		$ECHO "*** However, this would only work if libtool was able to extract symbol"
-		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$ECHO "*** not find such a program.  So, this module is probably useless."
-		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
@@ -5870,27 +7003,33 @@
 	           temp_xrpath=$func_stripname_result
 		   case " $xrpath " in
 		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
+		   *) func_append xrpath " $temp_xrpath";;
 		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      *) func_append temp_deplibs " $libdir";;
 	      esac
 	    done
 	    dependency_libs="$temp_deplibs"
 	  fi
 
-	  newlib_search_path="$newlib_search_path $absdir"
+	  func_append newlib_search_path " $absdir"
 	  # Link against this library
 	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 	  # ... and its dependency_libs
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    newdependency_libs="$deplib $newdependency_libs"
-	    if $opt_duplicate_deps ; then
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps ; then
 	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
 	      esac
 	    fi
-	    tmp_libs="$tmp_libs $deplib"
+	    func_append tmp_libs " $func_resolve_sysroot_result"
 	  done
 
 	  if test "$link_all_deplibs" != no; then
@@ -5900,8 +7039,10 @@
 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
 	        func_dirname "$deplib" "" "."
-		dir="$func_dirname_result"
+		dir=$func_dirname_result
 		# We need an absolute path.
 		case $dir in
 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
@@ -5928,8 +7069,8 @@
                       if test -z "$darwin_install_name"; then
                           darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
                       fi
-		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
-		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
 		      path=
 		    fi
 		  fi
@@ -5962,7 +7103,7 @@
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
-	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	fi
       fi
       dependency_libs="$newdependency_libs"
@@ -5979,7 +7120,7 @@
 	  for dir in $newlib_search_path; do
 	    case "$lib_search_path " in
 	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
+	    *) func_append lib_search_path " $dir" ;;
 	    esac
 	  done
 	  newlib_search_path=
@@ -6037,10 +7178,10 @@
 	    -L*)
 	      case " $tmp_libs " in
 	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      *) func_append tmp_libs " $deplib" ;;
 	      esac
 	      ;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    *) func_append tmp_libs " $deplib" ;;
 	    esac
 	  done
 	  eval $var=\"$tmp_libs\"
@@ -6056,7 +7197,7 @@
 	  ;;
 	esac
 	if test -n "$i" ; then
-	  tmp_libs="$tmp_libs $i"
+	  func_append tmp_libs " $i"
 	fi
       done
       dependency_libs=$tmp_libs
@@ -6097,7 +7238,7 @@
       # Now set the variables for building old libraries.
       build_libtool_libs=no
       oldlibs="$output"
-      objs="$objs$old_deplibs"
+      func_append objs "$old_deplibs"
       ;;
 
     lib)
@@ -6130,10 +7271,10 @@
 	if test "$deplibs_check_method" != pass_all; then
 	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 	else
-	  $ECHO
+	  echo
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
 	  $ECHO "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
+	  func_append libobjs " $objs"
 	fi
       fi
 
@@ -6192,13 +7333,14 @@
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
 	  darwin|linux|osf|windows|none)
 	    func_arith $number_major + $number_minor
 	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
-	  freebsd-aout|freebsd-elf|sunos)
+	  freebsd-aout|freebsd-elf|qnx|sunos)
 	    current="$number_major"
 	    revision="$number_minor"
 	    age="0"
@@ -6311,7 +7453,7 @@
 	  versuffix="$major.$revision"
 	  ;;
 
-	linux)
+	linux) # correct to gnu/linux during the next big refactor
 	  func_arith $current - $age
 	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
@@ -6334,7 +7476,7 @@
 	  done
 
 	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
+	  func_append verstring ":${current}.0"
 	  ;;
 
 	qnx)
@@ -6402,10 +7544,10 @@
       fi
 
       func_generate_dlsyms "$libname" "$libname" "yes"
-      libobjs="$libobjs $symfileobj"
+      func_append libobjs " $symfileobj"
       test "X$libobjs" = "X " && libobjs=
 
-      if test "$mode" != relink; then
+      if test "$opt_mode" != relink; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
@@ -6421,7 +7563,7 @@
 		   continue
 		 fi
 	       fi
-	       removelist="$removelist $p"
+	       func_append removelist " $p"
 	       ;;
 	    *) ;;
 	  esac
@@ -6432,27 +7574,28 @@
 
       # Now set the variables for building old libraries.
       if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+	func_append oldlibs " $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
       #for path in $notinst_path; do
-      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
-      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
-      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
       #done
 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
 	temp_xrpath=
 	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
 	  case "$finalize_rpath " in
 	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  *) func_append finalize_rpath " $libdir" ;;
 	  esac
 	done
 	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
@@ -6466,7 +7609,7 @@
       for lib in $old_dlfiles; do
 	case " $dlprefiles $dlfiles " in
 	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
+	*) func_append dlfiles " $lib" ;;
 	esac
       done
 
@@ -6476,19 +7619,19 @@
       for lib in $old_dlprefiles; do
 	case "$dlprefiles " in
 	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
+	*) func_append dlprefiles " $lib" ;;
 	esac
       done
 
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs System.ltframework"
+	    func_append deplibs " System.ltframework"
 	    ;;
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
@@ -6505,7 +7648,7 @@
 	  *)
 	    # Add libc to deplibs on all other systems if necessary.
 	    if test "$build_libtool_need_lc" = "yes"; then
-	      deplibs="$deplibs -lc"
+	      func_append deplibs " -lc"
 	    fi
 	    ;;
 	  esac
@@ -6554,7 +7697,7 @@
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
-		    newdeplibs="$newdeplibs $i"
+		    func_append newdeplibs " $i"
 		    i=""
 		    ;;
 		  esac
@@ -6565,21 +7708,21 @@
 		  set dummy $deplib_matches; shift
 		  deplib_match=$1
 		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
+		    func_append newdeplibs " $i"
 		  else
 		    droppeddeps=yes
-		    $ECHO
+		    echo
 		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		    $ECHO "*** I have the capability to make that library automatically link in when"
-		    $ECHO "*** you link to this library.  But I can only do this if you have a"
-		    $ECHO "*** shared version of the library, which I believe you do not have"
-		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
-		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
 		;;
 	      *)
-		newdeplibs="$newdeplibs $i"
+		func_append newdeplibs " $i"
 		;;
 	      esac
 	    done
@@ -6597,7 +7740,7 @@
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
 		    *" $i "*)
-		      newdeplibs="$newdeplibs $i"
+		      func_append newdeplibs " $i"
 		      i=""
 		      ;;
 		    esac
@@ -6608,29 +7751,29 @@
 		    set dummy $deplib_matches; shift
 		    deplib_match=$1
 		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      newdeplibs="$newdeplibs $i"
+		      func_append newdeplibs " $i"
 		    else
 		      droppeddeps=yes
-		      $ECHO
+		      echo
 		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		      $ECHO "*** I have the capability to make that library automatically link in when"
-		      $ECHO "*** you link to this library.  But I can only do this if you have a"
-		      $ECHO "*** shared version of the library, which you do not appear to have"
-		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
-		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
 		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  $ECHO
+		  echo
 		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $ECHO "*** make it link in!  You will probably need to install it or some"
-		  $ECHO "*** library that it depends on before this library will be fully"
-		  $ECHO "*** functional.  Installing it before continuing would be even better."
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
 		fi
 		;;
 	      *)
-		newdeplibs="$newdeplibs $i"
+		func_append newdeplibs " $i"
 		;;
 	      esac
 	    done
@@ -6647,15 +7790,27 @@
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
+		  func_append newdeplibs " $a_deplib"
 		  a_deplib=""
 		  ;;
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
 		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  if test "$want_nocaseglob" = yes; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
 		  for potent_lib in $potential_libs; do
 		      # Follow soft links.
 		      if ls -lLd "$potent_lib" 2>/dev/null |
@@ -6672,13 +7827,13 @@
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
 			 $SED -e 10q |
 			 $EGREP "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
+			func_append newdeplibs " $a_deplib"
 			a_deplib=""
 			break 2
 		      fi
@@ -6687,12 +7842,12 @@
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$ECHO
+		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because I did check the linker path looking for a file starting"
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
@@ -6703,7 +7858,7 @@
 	      ;;
 	    *)
 	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
+	      func_append newdeplibs " $a_deplib"
 	      ;;
 	    esac
 	  done # Gone through all deplibs.
@@ -6719,7 +7874,7 @@
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
+		  func_append newdeplibs " $a_deplib"
 		  a_deplib=""
 		  ;;
 		esac
@@ -6730,9 +7885,9 @@
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then
-		      newdeplibs="$newdeplibs $a_deplib"
+		      func_append newdeplibs " $a_deplib"
 		      a_deplib=""
 		      break 2
 		    fi
@@ -6741,12 +7896,12 @@
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$ECHO
+		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because I did check the linker path looking for a file starting"
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
@@ -6757,32 +7912,32 @@
 	      ;;
 	    *)
 	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
+	      func_append newdeplibs " $a_deplib"
 	      ;;
 	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
-	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
 	    done
 	  fi
-	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
-	     $GREP . >/dev/null; then
-	    $ECHO
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    $ECHO "*** All declared inter-library dependencies are being dropped."
+	    echo "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
-	  fi
+	    ;;
+	  esac
 	  ;;
 	esac
 	versuffix=$versuffix_save
@@ -6794,23 +7949,23 @@
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])
 	  # On Rhapsody replace the C library with the System framework
-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    $ECHO
-	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $ECHO "*** a static module, that should work as long as the dlopening"
-	    $ECHO "*** application is linked with the -dlopen flag."
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      $ECHO
-	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
-	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $ECHO "*** not find such a program.  So, this module is probably useless."
-	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -6820,16 +7975,16 @@
 	      build_libtool_libs=no
 	    fi
 	  else
-	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
-	    $ECHO "*** automatically added whenever a program is linked with this library"
-	    $ECHO "*** or is declared to -dlopen it."
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
 
 	    if test "$allow_undefined" = no; then
-	      $ECHO
-	      $ECHO "*** Since this library must not contain undefined symbols,"
-	      $ECHO "*** because either the platform does not support them or"
-	      $ECHO "*** it was explicitly requested with -no-undefined,"
-	      $ECHO "*** libtool will only create a static version of it."
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
@@ -6846,9 +8001,9 @@
       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
       case $host in
 	*-*-darwin*)
-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  ;;
       esac
 
@@ -6861,7 +8016,7 @@
 	*)
 	  case " $deplibs " in
 	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
+	    func_append new_libs " -L$path/$objdir" ;;
 	  esac
 	  ;;
 	esac
@@ -6871,10 +8026,10 @@
 	-L*)
 	  case " $new_libs " in
 	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
+	  *) func_append new_libs " $deplib" ;;
 	  esac
 	  ;;
-	*) new_libs="$new_libs $deplib" ;;
+	*) func_append new_libs " $deplib" ;;
 	esac
       done
       deplibs="$new_libs"
@@ -6886,15 +8041,22 @@
 
       # Test again, we may have decided not to build it any more
       if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
 	if test "$hardcode_into_libs" = yes; then
 	  # Hardcode the library paths
 	  hardcode_libdirs=
 	  dep_rpath=
 	  rpath="$finalize_rpath"
-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
 	  for libdir in $rpath; do
 	    if test -n "$hardcode_libdir_flag_spec"; then
 	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
 		if test -z "$hardcode_libdirs"; then
 		  hardcode_libdirs="$libdir"
 		else
@@ -6903,18 +8065,18 @@
 		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		    ;;
 		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
 		    ;;
 		  esac
 		fi
 	      else
 		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
+		func_append dep_rpath " $flag"
 	      fi
 	    elif test -n "$runpath_var"; then
 	      case "$perm_rpath " in
 	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      *) func_append perm_rpath " $libdir" ;;
 	      esac
 	    fi
 	  done
@@ -6922,17 +8084,13 @@
 	  if test -n "$hardcode_libdir_separator" &&
 	     test -n "$hardcode_libdirs"; then
 	    libdir="$hardcode_libdirs"
-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
-	    else
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	    fi
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
 	  fi
 	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
 	    # We should set the runpath_var.
 	    rpath=
 	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
+	      func_append rpath "$dir:"
 	    done
 	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
 	  fi
@@ -6940,7 +8098,7 @@
 	fi
 
 	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
 	if test -n "$shlibpath"; then
 	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
 	fi
@@ -6966,18 +8124,18 @@
 	linknames=
 	for link
 	do
-	  linknames="$linknames $link"
+	  func_append linknames " $link"
 	done
 
 	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	test "X$libobjs" = "X " && libobjs=
 
 	delfiles=
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
 	  export_symbols="$output_objdir/$libname.uexp"
-	  delfiles="$delfiles $export_symbols"
+	  func_append delfiles " $export_symbols"
 	fi
 
 	orig_export_symbols=
@@ -7008,14 +8166,46 @@
 	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
 	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
+	    for cmd1 in $cmds; do
 	      IFS="$save_ifs"
-	      eval cmd=\"$cmd\"
-	      func_len " $cmd"
-	      len=$func_len_result
-	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test "$try_normal_branch" = yes \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
 		func_show_eval "$cmd" 'exit $?'
 		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=${output_objdir}/${output_la}.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
 	      else
 		# The command line is too long to execute in one step.
 		func_verbose "using reloadable object file for export list..."
@@ -7036,7 +8226,7 @@
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  tmp_export_symbols="$export_symbols"
 	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
 	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
@@ -7048,7 +8238,7 @@
 	  # global variables. join(1) would be nice here, but unfortunately
 	  # isn't a blessed tool.
 	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
 	  export_symbols=$output_objdir/$libname.def
 	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	fi
@@ -7058,7 +8248,7 @@
 	  case " $convenience " in
 	  *" $test_deplib "*) ;;
 	  *)
-	    tmp_deplibs="$tmp_deplibs $test_deplib"
+	    func_append tmp_deplibs " $test_deplib"
 	    ;;
 	  esac
 	done
@@ -7078,21 +8268,21 @@
 	    test "X$libobjs" = "X " && libobjs=
 	  else
 	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
+	    func_append generated " $gentop"
 
 	    func_extract_archives $gentop $convenience
-	    libobjs="$libobjs $func_extract_archives_result"
+	    func_append libobjs " $func_extract_archives_result"
 	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	fi
 
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
+	  func_append linker_flags " $flag"
 	fi
 
 	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
+	if test "$opt_mode" = relink; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 
@@ -7137,7 +8327,8 @@
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
-	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
+	  func_basename "$output"
+	  output_la=$func_basename_result
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
@@ -7150,13 +8341,16 @@
 	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
 	    output=${output_objdir}/${output_la}.lnkscript
 	    func_verbose "creating GNU ld script: $output"
-	    $ECHO 'INPUT (' > $output
+	    echo 'INPUT (' > $output
 	    for obj in $save_libobjs
 	    do
-	      $ECHO "$obj" >> $output
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
 	    done
-	    $ECHO ')' >> $output
-	    delfiles="$delfiles $output"
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
 	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
 	    output=${output_objdir}/${output_la}.lnk
 	    func_verbose "creating linker input file list: $output"
@@ -7170,10 +8364,12 @@
 	    fi
 	    for obj
 	    do
-	      $ECHO "$obj" >> $output
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
 	    done
-	    delfiles="$delfiles $output"
-	    output=$firstobj\"$file_list_spec$output\"
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
 	  else
 	    if test -n "$save_libobjs"; then
 	      func_verbose "creating reloadable object files..."
@@ -7197,17 +8393,19 @@
 		  # command to the queue.
 		  if test "$k" -eq 1 ; then
 		    # The first file doesn't have a previous command to add.
-		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
 		  else
 		    # All subsequent reloadable object files will link in
 		    # the last one created.
-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
 		  fi
 		  last_robj=$output_objdir/$output_la-${k}.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
 		  output=$output_objdir/$output_la-${k}.$objext
-		  objlist=$obj
+		  objlist=" $obj"
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
 		  len=$func_arith_result
@@ -7217,11 +8415,12 @@
 	      # reloadable object file.  All subsequent reloadable object
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
 	      if test -n "$last_robj"; then
 	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
 	      fi
-	      delfiles="$delfiles $output"
+	      func_append delfiles " $output"
 
 	    else
 	      output=
@@ -7255,7 +8454,7 @@
 		lt_exit=$?
 
 		# Restore the uninstalled library and exit
-		if test "$mode" = relink; then
+		if test "$opt_mode" = relink; then
 		  ( cd "$output_objdir" && \
 		    $RM "${realname}T" && \
 		    $MV "${realname}U" "$realname" )
@@ -7276,7 +8475,7 @@
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	      tmp_export_symbols="$export_symbols"
 	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
@@ -7288,7 +8487,7 @@
 	      # global variables. join(1) would be nice here, but unfortunately
 	      # isn't a blessed tool.
 	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
-	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
 	      export_symbols=$output_objdir/$libname.def
 	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	    fi
@@ -7329,10 +8528,10 @@
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
 	  gentop="$output_objdir/${outputname}x"
-	  generated="$generated $gentop"
+	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
-	  libobjs="$libobjs $func_extract_archives_result"
+	  func_append libobjs " $func_extract_archives_result"
 	  test "X$libobjs" = "X " && libobjs=
 	fi
 
@@ -7348,7 +8547,7 @@
 	    lt_exit=$?
 
 	    # Restore the uninstalled library and exit
-	    if test "$mode" = relink; then
+	    if test "$opt_mode" = relink; then
 	      ( cd "$output_objdir" && \
 	        $RM "${realname}T" && \
 		$MV "${realname}U" "$realname" )
@@ -7360,7 +8559,7 @@
 	IFS="$save_ifs"
 
 	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
+	if test "$opt_mode" = relink; then
 	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
 	  if test -n "$convenience"; then
@@ -7441,18 +8640,21 @@
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
-	  generated="$generated $gentop"
+	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $convenience
 	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
       fi
 
+      # If we're not building shared, we need to use non_pic_objs
+      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
       func_execute_cmds "$reload_cmds" 'exit $?'
@@ -7512,8 +8714,8 @@
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
 	;;
       esac
 
@@ -7524,14 +8726,14 @@
 	if test "$tagname" = CXX ; then
 	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
 	    10.[0123])
-	      compile_command="$compile_command ${wl}-bind_at_load"
-	      finalize_command="$finalize_command ${wl}-bind_at_load"
+	      func_append compile_command " ${wl}-bind_at_load"
+	      func_append finalize_command " ${wl}-bind_at_load"
 	    ;;
 	  esac
 	fi
 	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	;;
       esac
 
@@ -7545,7 +8747,7 @@
 	*)
 	  case " $compile_deplibs " in
 	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
+	    func_append new_libs " -L$path/$objdir" ;;
 	  esac
 	  ;;
 	esac
@@ -7555,17 +8757,17 @@
 	-L*)
 	  case " $new_libs " in
 	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
+	  *) func_append new_libs " $deplib" ;;
 	  esac
 	  ;;
-	*) new_libs="$new_libs $deplib" ;;
+	*) func_append new_libs " $deplib" ;;
 	esac
       done
       compile_deplibs="$new_libs"
 
 
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
 
       if test -n "$rpath$xrpath"; then
 	# If the user specified any rpath flags, then add them.
@@ -7573,7 +8775,7 @@
 	  # This is the magic to use -rpath.
 	  case "$finalize_rpath " in
 	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  *) func_append finalize_rpath " $libdir" ;;
 	  esac
 	done
       fi
@@ -7592,18 +8794,18 @@
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
 	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
 		;;
 	      esac
 	    fi
 	  else
 	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
+	    func_append rpath " $flag"
 	  fi
 	elif test -n "$runpath_var"; then
 	  case "$perm_rpath " in
 	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  *) func_append perm_rpath " $libdir" ;;
 	  esac
 	fi
 	case $host in
@@ -7612,12 +8814,12 @@
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  ::) dllsearchpath=$libdir;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  *) func_append dllsearchpath ":$libdir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
 	  ::) dllsearchpath=$testbindir;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  *) func_append dllsearchpath ":$testbindir";;
 	  esac
 	  ;;
 	esac
@@ -7643,18 +8845,18 @@
 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
 		;;
 	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
 		;;
 	      esac
 	    fi
 	  else
 	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
+	    func_append rpath " $flag"
 	  fi
 	elif test -n "$runpath_var"; then
 	  case "$finalize_perm_rpath " in
 	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
 	  esac
 	fi
       done
@@ -7668,8 +8870,8 @@
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
-	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
       fi
 
       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
@@ -7681,15 +8883,15 @@
 
       wrappers_required=yes
       case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
       *cygwin* | *mingw* )
         if test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
-      *cegcc)
-        # Disable wrappers for cegcc, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
@@ -7698,13 +8900,19 @@
       esac
       if test "$wrappers_required" = no; then
 	# Replace the output file specification.
-	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
 	exit_status=0
 	func_show_eval "$link_command" 'exit_status=$?'
 
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
 	# Delete the generated files.
 	if test -f "$output_objdir/${outputname}S.${objext}"; then
 	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
@@ -7727,7 +8935,7 @@
 	  # We should set the runpath_var.
 	  rpath=
 	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
+	    func_append rpath "$dir:"
 	  done
 	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
 	fi
@@ -7735,7 +8943,7 @@
 	  # We should set the runpath_var.
 	  rpath=
 	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
+	    func_append rpath "$dir:"
 	  done
 	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
 	fi
@@ -7745,11 +8953,18 @@
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
-	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
 	$opt_dry_run || $RM $output
 	# Link the executable and exit
 	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
 	exit $EXIT_SUCCESS
       fi
 
@@ -7764,7 +8979,7 @@
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -7776,13 +8991,19 @@
       fi
 
       # Replace the output file specification.
-      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
       # Delete the old output files.
       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
       func_show_eval "$link_command" 'exit $?'
 
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
       # Now create the wrapper script.
       func_verbose "creating $output"
 
@@ -7800,18 +9021,7 @@
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $ECHO for shipping.
-      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
-	case $progpath in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
-	esac
-	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
       fi
 
       # Only actually do things if not in dry run mode.
@@ -7891,7 +9101,7 @@
 	else
 	  oldobjs="$old_deplibs $non_pic_objects"
 	  if test "$preload" = yes && test -f "$symfileobj"; then
-	    oldobjs="$oldobjs $symfileobj"
+	    func_append oldobjs " $symfileobj"
 	  fi
 	fi
 	addlibs="$old_convenience"
@@ -7899,10 +9109,10 @@
 
       if test -n "$addlibs"; then
 	gentop="$output_objdir/${outputname}x"
-	generated="$generated $gentop"
+	func_append generated " $gentop"
 
 	func_extract_archives $gentop $addlibs
-	oldobjs="$oldobjs $func_extract_archives_result"
+	func_append oldobjs " $func_extract_archives_result"
       fi
 
       # Do each command in the archive commands.
@@ -7913,10 +9123,10 @@
 	# Add any objects from preloaded convenience libraries
 	if test -n "$dlprefiles"; then
 	  gentop="$output_objdir/${outputname}x"
-	  generated="$generated $gentop"
+	  func_append generated " $gentop"
 
 	  func_extract_archives $gentop $dlprefiles
-	  oldobjs="$oldobjs $func_extract_archives_result"
+	  func_append oldobjs " $func_extract_archives_result"
 	fi
 
 	# POSIX demands no paths to be encoded in archives.  We have
@@ -7932,9 +9142,9 @@
 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else
-	  $ECHO "copying selected object files to avoid basename conflicts..."
+	  echo "copying selected object files to avoid basename conflicts..."
 	  gentop="$output_objdir/${outputname}x"
-	  generated="$generated $gentop"
+	  func_append generated " $gentop"
 	  func_mkdir_p "$gentop"
 	  save_oldobjs=$oldobjs
 	  oldobjs=
@@ -7958,18 +9168,30 @@
 		esac
 	      done
 	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      oldobjs="$oldobjs $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
 	      ;;
-	    *) oldobjs="$oldobjs $obj" ;;
+	    *) func_append oldobjs " $obj" ;;
 	    esac
 	  done
 	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
 	eval cmds=\"$old_archive_cmds\"
 
 	func_len " $cmds"
 	len=$func_len_result
 	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
 	else
 	  # the command line is too long to link in one step, link in parts
 	  func_verbose "using piecewise archive linking..."
@@ -8043,7 +9265,7 @@
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
@@ -8063,12 +9285,23 @@
 	      *.la)
 		func_basename "$deplib"
 		name="$func_basename_result"
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		func_resolve_sysroot "$deplib"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
 		test -z "$libdir" && \
 		  func_fatal_error "\`$deplib' is not a valid libtool archive"
-		newdependency_libs="$newdependency_libs $libdir/$name"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
 		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
 	      esac
 	    done
 	    dependency_libs="$newdependency_libs"
@@ -8082,9 +9315,9 @@
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
 		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		newdlfiles="$newdlfiles $libdir/$name"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
-	      *) newdlfiles="$newdlfiles $lib" ;;
+	      *) func_append newdlfiles " $lib" ;;
 	      esac
 	    done
 	    dlfiles="$newdlfiles"
@@ -8101,7 +9334,7 @@
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
 		test -z "$libdir" && \
 		  func_fatal_error "\`$lib' is not a valid libtool archive"
-		newdlprefiles="$newdlprefiles $libdir/$name"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
 		;;
 	      esac
 	    done
@@ -8113,7 +9346,7 @@
 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
-	      newdlfiles="$newdlfiles $abs"
+	      func_append newdlfiles " $abs"
 	    done
 	    dlfiles="$newdlfiles"
 	    newdlprefiles=
@@ -8122,15 +9355,33 @@
 		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
 		*) abs=`pwd`"/$lib" ;;
 	      esac
-	      newdlprefiles="$newdlprefiles $abs"
+	      func_append newdlprefiles " $abs"
 	    done
 	    dlprefiles="$newdlprefiles"
 	  fi
 	  $RM $output
 	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test "x$bindir" != x ;
+	      then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
@@ -8189,7 +9440,7 @@
     exit $EXIT_SUCCESS
 }
 
-{ test "$mode" = link || test "$mode" = relink; } &&
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
     func_mode_link ${1+"$@"}
 
 
@@ -8209,9 +9460,9 @@
     for arg
     do
       case $arg in
-      -f) RM="$RM $arg"; rmforce=yes ;;
-      -*) RM="$RM $arg" ;;
-      *) files="$files $arg" ;;
+      -f) func_append RM " $arg"; rmforce=yes ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
       esac
     done
 
@@ -8220,24 +9471,23 @@
 
     rmdirs=
 
-    origobjdir="$objdir"
     for file in $files; do
       func_dirname "$file" "" "."
       dir="$func_dirname_result"
       if test "X$dir" = X.; then
-	objdir="$origobjdir"
+	odir="$objdir"
       else
-	objdir="$dir/$origobjdir"
+	odir="$dir/$objdir"
       fi
       func_basename "$file"
       name="$func_basename_result"
-      test "$mode" = uninstall && objdir="$dir"
+      test "$opt_mode" = uninstall && odir="$dir"
 
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test "$mode" = clean; then
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test "$opt_mode" = clean; then
 	case " $rmdirs " in
-	  *" $objdir "*) ;;
-	  *) rmdirs="$rmdirs $objdir" ;;
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
 	esac
       fi
 
@@ -8263,18 +9513,17 @@
 
 	  # Delete the libtool libraries and symlinks.
 	  for n in $library_names; do
-	    rmfiles="$rmfiles $objdir/$n"
+	    func_append rmfiles " $odir/$n"
 	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
 
-	  case "$mode" in
+	  case "$opt_mode" in
 	  clean)
-	    case "  $library_names " in
-	    # "  " in the beginning catches empty $dlname
+	    case " $library_names " in
 	    *" $dlname "*) ;;
-	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
 	    esac
-	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
 	    ;;
 	  uninstall)
 	    if test -n "$library_names"; then
@@ -8302,19 +9551,19 @@
 	  # Add PIC object to the list of files to remove.
 	  if test -n "$pic_object" &&
 	     test "$pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$pic_object"
+	    func_append rmfiles " $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
 	  if test -n "$non_pic_object" &&
 	     test "$non_pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$non_pic_object"
+	    func_append rmfiles " $dir/$non_pic_object"
 	  fi
 	fi
 	;;
 
       *)
-	if test "$mode" = clean ; then
+	if test "$opt_mode" = clean ; then
 	  noexename=$name
 	  case $file in
 	  *.exe)
@@ -8324,7 +9573,7 @@
 	    noexename=$func_stripname_result
 	    # $file with .exe has already been added to rmfiles,
 	    # add $file without .exe
-	    rmfiles="$rmfiles $file"
+	    func_append rmfiles " $file"
 	    ;;
 	  esac
 	  # Do a test to see if this is a libtool program.
@@ -8333,7 +9582,7 @@
 	      func_ltwrapper_scriptname "$file"
 	      relink_command=
 	      func_source $func_ltwrapper_scriptname_result
-	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
 	    else
 	      relink_command=
 	      func_source $dir/$noexename
@@ -8341,12 +9590,12 @@
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
-	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
 	    if test "$fast_install" = yes && test -n "$relink_command"; then
-	      rmfiles="$rmfiles $objdir/lt-$name"
+	      func_append rmfiles " $odir/lt-$name"
 	    fi
 	    if test "X$noexename" != "X$name" ; then
-	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+	      func_append rmfiles " $odir/lt-${noexename}.c"
 	    fi
 	  fi
 	fi
@@ -8354,7 +9603,6 @@
       esac
       func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
-    objdir="$origobjdir"
 
     # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
@@ -8366,16 +9614,16 @@
     exit $exit_status
 }
 
-{ test "$mode" = uninstall || test "$mode" = clean; } &&
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
     func_mode_uninstall ${1+"$@"}
 
-test -z "$mode" && {
+test -z "$opt_mode" && {
   help="$generic_help"
   func_fatal_help "you must specify a MODE"
 }
 
 test -z "$exec_cmd" && \
-  func_fatal_help "invalid operation mode \`$mode'"
+  func_fatal_help "invalid operation mode \`$opt_mode'"
 
 if test -n "$exec_cmd"; then
   eval exec "$exec_cmd"
diff --git a/m4/ax_check_icu.m4 b/m4/ax_check_icu.m4
deleted file mode 100644
index f30de16..0000000
--- a/m4/ax_check_icu.m4
+++ /dev/null
@@ -1,80 +0,0 @@
-# ===========================================================================
-#       http://www.gnu.org/software/autoconf-archive/ax_check_icu.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_CHECK_ICU(version, action-if, action-if-not)
-#
-# DESCRIPTION
-#
-#   Defines ICU_LIBS, ICU_CFLAGS, ICU_CXXFLAGS. See icu-config(1) man page.
-#
-# LICENSE
-#
-#   Copyright (c) 2008 Akos Maroy <darkeye@tyrell.hu>
-#
-#   Copying and distribution of this file, with or without modification, are
-#   permitted in any medium without royalty provided the copyright notice
-#   and this notice are preserved. This file is offered as-is, without any
-#   warranty.
-
-#serial 6
-
-AU_ALIAS([AC_CHECK_ICU], [AX_CHECK_ICU])
-AC_DEFUN([AX_CHECK_ICU], [
-  succeeded=no
-
-  if test -z "$ICU_CONFIG"; then
-    AC_PATH_PROG(ICU_CONFIG, icu-config, no)
-  fi
-
-  if test "$ICU_CONFIG" = "no" ; then
-    echo "*** The icu-config script could not be found. Make sure it is"
-    echo "*** in your path, and that taglib is properly installed."
-    echo "*** Or see http://ibm.com/software/globalization/icu/"
-  else
-    ICU_VERSION=`$ICU_CONFIG --version`
-    AC_MSG_CHECKING(for ICU >= $1)
-        VERSION_CHECK=`expr $ICU_VERSION \>\= $1`
-        if test "$VERSION_CHECK" = "1" ; then
-            AC_MSG_RESULT(yes)
-            succeeded=yes
-
-            AC_MSG_CHECKING(ICU_CPPFLAGS)
-            ICU_CPPFLAGS=`$ICU_CONFIG --cppflags`
-            AC_MSG_RESULT($ICU_CPPFLAGS)
-
-            AC_MSG_CHECKING(ICU_CFLAGS)
-            ICU_CFLAGS=`$ICU_CONFIG --cflags`
-            AC_MSG_RESULT($ICU_CFLAGS)
-
-            AC_MSG_CHECKING(ICU_CXXFLAGS)
-            ICU_CXXFLAGS=`$ICU_CONFIG --cxxflags`
-            AC_MSG_RESULT($ICU_CXXFLAGS)
-
-            AC_MSG_CHECKING(ICU_LIBS)
-            ICU_LIBS=`$ICU_CONFIG --ldflags`
-            AC_MSG_RESULT($ICU_LIBS)
-        else
-            ICU_CPPFLAGS=""
-            ICU_CFLAGS=""
-            ICU_CXXFLAGS=""
-            ICU_LIBS=""
-            ## If we have a custom action on failure, don't print errors, but
-            ## do set a variable so people can do so.
-            ifelse([$3], ,echo "can't find ICU >= $1",)
-        fi
-
-        AC_SUBST(ICU_CPPFLAGS)
-        AC_SUBST(ICU_CFLAGS)
-        AC_SUBST(ICU_CXXFLAGS)
-        AC_SUBST(ICU_LIBS)
-  fi
-
-  if test $succeeded = yes; then
-     ifelse([$2], , :, [$2])
-  else
-     ifelse([$3], , AC_MSG_ERROR([Library requirements (ICU) not met.]), [$3])
-  fi
-])
diff --git a/m4/libtool.m4 b/m4/libtool.m4
index a3fee53..828104c 100644
--- a/m4/libtool.m4
+++ b/m4/libtool.m4
@@ -1,7 +1,8 @@
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 # This file is free software; the Free Software Foundation gives
@@ -10,7 +11,8 @@
 
 m4_define([_LT_COPYING], [dnl
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -37,7 +39,7 @@
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 ])
 
-# serial 56 LT_INIT
+# serial 57 LT_INIT
 
 
 # LT_PREREQ(VERSION)
@@ -66,6 +68,7 @@
 # ------------------
 AC_DEFUN([LT_INIT],
 [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
 AC_BEFORE([$0], [LT_LANG])dnl
 AC_BEFORE([$0], [LT_OUTPUT])dnl
 AC_BEFORE([$0], [LTDL_INIT])dnl
@@ -82,6 +85,8 @@
 AC_REQUIRE([LTOBSOLETE_VERSION])dnl
 m4_require([_LT_PROG_LTMAIN])dnl
 
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
 dnl Parse OPTIONS
 _LT_SET_OPTIONS([$0], [$1])
 
@@ -118,7 +123,7 @@
     *) break;;
   esac
 done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
 ])
 
 
@@ -138,6 +143,11 @@
 m4_defun([_LT_SETUP],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
 _LT_DECL([], [host_alias], [0], [The host system])dnl
 _LT_DECL([], [host], [0])dnl
 _LT_DECL([], [host_os], [0])dnl
@@ -160,10 +170,13 @@
 dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
 m4_require([_LT_CMD_RELOAD])dnl
 m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
 m4_require([_LT_CMD_OLD_ARCHIVE])dnl
 m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
 
 _LT_CONFIG_LIBTOOL_INIT([
 # See if we are running on zsh, and set the options which allow our
@@ -179,7 +192,6 @@
 _LT_CHECK_OBJDIR
 
 m4_require([_LT_TAG_COMPILER])dnl
-_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -193,23 +205,6 @@
   ;;
 esac
 
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
 # Global variables:
 ofile=libtool
 can_build_shared=yes
@@ -250,6 +245,28 @@
 ])# _LT_SETUP
 
 
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
 # _LT_PROG_LTMAIN
 # ---------------
 # Note that this code is called both from `configure', and `config.status'
@@ -408,7 +425,7 @@
 # declaration there will have the same value as in `configure'.  VARNAME
 # must have a single quote delimited value for this to work.
 m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
 
 
 # _LT_CONFIG_STATUS_DECLARATIONS
@@ -418,7 +435,7 @@
 # embedded single quotes properly.  In configure, this macro expands
 # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
 #
-#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
 m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
 [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
     [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
@@ -517,12 +534,20 @@
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
 # Quote evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -533,9 +558,9 @@
 # Double-quote double-evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -543,16 +568,38 @@
     esac
 done
 
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\[$]0 --fallback-echo"')dnl "
-  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
-  ;;
-esac
-
 _LT_OUTPUT_LIBTOOL_INIT
 ])
 
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable.  If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins.  After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script.  The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 
 # LT_OUTPUT
 # ---------
@@ -562,20 +609,11 @@
 AC_DEFUN([LT_OUTPUT],
 [: ${CONFIG_LT=./config.lt}
 AC_MSG_NOTICE([creating $CONFIG_LT])
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
-
-lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
 
 cat >>"$CONFIG_LT" <<\_LTEOF
-AS_SHELL_SANITIZE
-_AS_PREPARE
-
-exec AS_MESSAGE_FD>&1
+lt_cl_silent=false
 exec AS_MESSAGE_LOG_FD>>config.log
 {
   echo
@@ -601,7 +639,7 @@
 m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
 configured by $[0], generated by m4_PACKAGE_STRING.
 
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2011 Free Software Foundation, Inc.
 This config.lt script is free software; the Free Software Foundation
 gives unlimited permision to copy, distribute and modify it."
 
@@ -646,15 +684,13 @@
 # appending to config.log, which fails on DOS, as config.log is still kept
 # open by configure.  Here we exec the FD to /dev/null, effectively closing
 # config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
-  lt_cl_success=:
-  test "$silent" = yes &&
-    lt_config_lt_args="$lt_config_lt_args --quiet"
-  exec AS_MESSAGE_LOG_FD>/dev/null
-  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-  exec AS_MESSAGE_LOG_FD>>config.log
-  $lt_cl_success || AS_EXIT(1)
-fi
+lt_cl_success=:
+test "$silent" = yes &&
+  lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
 ])# LT_OUTPUT
 
 
@@ -717,15 +753,12 @@
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
 
-  _LT_PROG_XSI_SHELLFNS
+  _LT_PROG_REPLACE_SHELLFNS
 
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" ||
+   mv -f "$cfgfile" "$ofile" ||
     (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
   chmod +x "$ofile"
 ],
@@ -770,6 +803,7 @@
 m4_case([$1],
   [C],			[_LT_LANG(C)],
   [C++],		[_LT_LANG(CXX)],
+  [Go],			[_LT_LANG(GO)],
   [Java],		[_LT_LANG(GCJ)],
   [Fortran 77],		[_LT_LANG(F77)],
   [Fortran],		[_LT_LANG(FC)],
@@ -791,6 +825,31 @@
 ])# _LT_LANG
 
 
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC],     [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+  fi
+fi
+if test -z "$GOC"; then
+  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
 # _LT_LANG_DEFAULT_CONFIG
 # -----------------------
 m4_defun([_LT_LANG_DEFAULT_CONFIG],
@@ -821,6 +880,10 @@
        m4_ifdef([LT_PROG_GCJ],
 	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
 
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+  [LT_LANG(GO)],
+  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
 AC_PROVIDE_IFELSE([LT_PROG_RC],
   [LT_LANG(RC)],
   [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
@@ -831,11 +894,13 @@
 AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
 AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
 AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
 dnl AC_DEFUN([AC_LIBTOOL_F77], [])
 dnl AC_DEFUN([AC_LIBTOOL_FC], [])
 dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
 
 
 # _LT_TAG_COMPILER
@@ -921,7 +986,13 @@
 	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
 	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
         _lt_result=$?
-	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
 	  lt_cv_apple_cc_single_mod=yes
 	else
 	  cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -929,6 +1000,7 @@
 	rm -rf libconftest.dylib*
 	rm -f conftest.*
       fi])
+
     AC_CACHE_CHECK([for -exported_symbols_list linker flag],
       [lt_cv_ld_exported_symbols_list],
       [lt_cv_ld_exported_symbols_list=no
@@ -940,6 +1012,34 @@
 	[lt_cv_ld_exported_symbols_list=no])
 	LDFLAGS="$save_LDFLAGS"
     ])
+
+    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+      [lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+    ])
     case $host_os in
     rhapsody* | darwin1.[[012]])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -967,7 +1067,7 @@
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-    if test "$DSYMUTIL" != ":"; then
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -977,8 +1077,8 @@
 ])
 
 
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
 # Checks for linker and compiler features on darwin
 m4_defun([_LT_DARWIN_LINKER_FEATURES],
 [
@@ -987,7 +1087,13 @@
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_automatic, $1)=yes
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+  else
+    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  fi
   _LT_TAGVAR(link_all_deplibs, $1)=yes
   _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -995,7 +1101,7 @@
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
+    output_verbose_link_cmd=func_echo_all
     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -1011,203 +1117,142 @@
   fi
 ])
 
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
 # Links a minimal program and checks the executable
 # for the system default hardcoded library path. In most cases,
 # this is /usr/lib:/lib, but when the MPI compilers are used
 # the location of the communication and MPI libs are included too.
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
 m4_defun([_LT_SYS_MODULE_PATH_AIX],
 [m4_require([_LT_DECL_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+  lt_aix_libpath_sed='[
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }]'
+  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi],[])
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+  fi
+  ])
+  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
 ])# _LT_SYS_MODULE_PATH_AIX
 
 
 # _LT_SHELL_INIT(ARG)
 # -------------------
 m4_define([_LT_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
-	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-	 [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_SHELL_INIT
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
 
 
 # _LT_PROG_ECHO_BACKSLASH
 # -----------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
 m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[_LT_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
 
-case X$lt_ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*" 
+}
+
+case "$ECHO" in
+  printf*) AC_MSG_RESULT([printf]) ;;
+  print*) AC_MSG_RESULT([print -r]) ;;
+  *) AC_MSG_RESULT([cat]) ;;
 esac
 
-ECHO=${lt_ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test "X`printf %s $ECHO`" = "X$ECHO" \
+      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
 
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<_LT_EOF
-[$]*
-_LT_EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
-  if test "X${echo_test_string+set}" != Xset; then
-    # find a string as large as possible, as long as the shell can cope with it
-    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-      then
-        break
-      fi
-    done
-  fi
-
-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-     test "X$echo_testing_string" = "X$echo_test_string"; then
-    :
-  else
-    # The Solaris, AIX, and Digital Unix default echo programs unquote
-    # backslashes.  This makes it impossible to quote backslashes using
-    #   echo "$something" | sed 's/\\/\\\\/g'
-    #
-    # So, first we look for a working echo in the user's PATH.
-
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for dir in $PATH /usr/ucb; do
-      IFS="$lt_save_ifs"
-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        ECHO="$dir/echo"
-        break
-      fi
-    done
-    IFS="$lt_save_ifs"
-
-    if test "X$ECHO" = Xecho; then
-      # We didn't find a better echo, so look for alternatives.
-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        # This shell has a builtin print -r that does the trick.
-        ECHO='print -r'
-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-	   test "X$CONFIG_SHELL" != X/bin/ksh; then
-        # If we have ksh, try running configure again with it.
-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-        export ORIGINAL_CONFIG_SHELL
-        CONFIG_SHELL=/bin/ksh
-        export CONFIG_SHELL
-        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-      else
-        # Try using printf.
-        ECHO='printf %s\n'
-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	  # Cool, printf works
-	  :
-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	  export CONFIG_SHELL
-	  SHELL="$CONFIG_SHELL"
-	  export SHELL
-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        else
-	  # maybe with a smaller string...
-	  prev=:
-
-	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-	    then
-	      break
-	    fi
-	    prev="$cmd"
-	  done
-
-	  if test "$prev" != 'sed 50q "[$]0"'; then
-	    echo_test_string=`eval $prev`
-	    export echo_test_string
-	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	  else
-	    # Oops.  We lost completely, so just stick with echo.
-	    ECHO=echo
-	  fi
-        fi
-      fi
-    fi
-  fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(lt_ECHO)
-])
 _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1],
-    [An echo program that does not interpret backslashes])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
 ])# _LT_PROG_ECHO_BACKSLASH
 
 
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[  --with-sysroot[=DIR] Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted.  We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   AC_MSG_RESULT([${with_sysroot}])
+   AC_MSG_ERROR([The sysroot must be an absolute path.])
+   ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
 # _LT_ENABLE_LOCK
 # ---------------
 m4_defun([_LT_ENABLE_LOCK],
@@ -1236,7 +1281,7 @@
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     if test "$lt_cv_prog_gnu_ld" = yes; then
       case `/usr/bin/file conftest.$ac_objext` in
@@ -1329,14 +1374,27 @@
     CFLAGS="$SAVE_CFLAGS"
   fi
   ;;
-sparc*-*solaris*)
+*-*solaris*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
       *)
 	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
@@ -1354,14 +1412,47 @@
 ])# _LT_ENABLE_LOCK
 
 
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+  [lt_cv_ar_at_file=no
+   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+     [echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([lt_ar_try])
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	AC_TRY_EVAL([lt_ar_try])
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+     ])
+  ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+  [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
 # _LT_CMD_OLD_ARCHIVE
 # -------------------
 m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1])
+[_LT_PROG_AR
 
 AC_CHECK_TOOL(STRIP, strip, :)
 test -z "$STRIP" && STRIP=:
@@ -1380,18 +1471,27 @@
 if test -n "$RANLIB"; then
   case $host_os in
   openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
     ;;
   *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
     ;;
   esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
 fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
 _LT_DECL([], [old_postinstall_cmds], [2])
 _LT_DECL([], [old_postuninstall_cmds], [2])
 _LT_TAGDECL([], [old_archive_cmds], [2],
     [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+    [Whether to use a lock for old archive extraction])
 ])# _LT_CMD_OLD_ARCHIVE
 
 
@@ -1416,15 +1516,15 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
@@ -1464,7 +1564,7 @@
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -1527,6 +1627,11 @@
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
@@ -1552,6 +1657,11 @@
     lt_cv_sys_max_cmd_len=196608
     ;;
 
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
   osf*)
     # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
     # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
@@ -1591,8 +1701,8 @@
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
@@ -1643,7 +1753,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-[#line __oline__ "configure"
+[#line $LINENO "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -1684,7 +1794,13 @@
 #  endif
 #endif
 
-void fnord() { int i=42;}
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -1693,7 +1809,11 @@
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
       /* dlclose (self); */
     }
   else
@@ -1869,16 +1989,16 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
@@ -2037,6 +2157,7 @@
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_OBJDUMP])dnl
 m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
 m4_if([$1],
 	[], [
@@ -2045,16 +2166,23 @@
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
   lt_tmp_lt_search_path_spec=
@@ -2067,7 +2195,7 @@
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -2087,7 +2215,13 @@
   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
 }'`
-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi])
@@ -2113,7 +2247,7 @@
 
 case $host_os in
 aix3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
   shlibpath_var=LIBPATH
 
@@ -2122,7 +2256,7 @@
   ;;
 
 aix[[4-9]]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   hardcode_into_libs=yes
@@ -2175,7 +2309,7 @@
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -2187,7 +2321,7 @@
   ;;
 
 bsdi[[45]]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -2206,8 +2340,9 @@
   need_version=no
   need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
@@ -2228,36 +2363,83 @@
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+m4_if([$1], [],[
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
       library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       ;;
     esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
     ;;
 
   *)
+    # Assume MSVC wrapper
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
     ;;
   esac
-  dynamic_linker='Win32 ld.exe'
   # FIXME: first we should search . and the directory the executable is in
   shlibpath_var=PATH
   ;;
@@ -2278,7 +2460,7 @@
   ;;
 
 dgux*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
@@ -2286,10 +2468,6 @@
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -2297,7 +2475,7 @@
     objformat=`/usr/bin/objformat`
   else
     case $host_os in
-    freebsd[[123]]*) objformat=aout ;;
+    freebsd[[23]].*) objformat=aout ;;
     *) objformat=elf ;;
     esac
   fi
@@ -2315,7 +2493,7 @@
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
-  freebsd2*)
+  freebsd2.*)
     shlibpath_overrides_runpath=yes
     ;;
   freebsd3.[[01]]* | freebsdelf3.[[01]]*)
@@ -2335,12 +2513,26 @@
   ;;
 
 gnu*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
   hardcode_into_libs=yes
   ;;
 
@@ -2386,12 +2578,14 @@
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
   postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
   ;;
 
 interix[[3-9]]*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
@@ -2407,7 +2601,7 @@
     nonstopux*) version_type=nonstopux ;;
     *)
 	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
+		version_type=linux # correct to gnu/linux during the next big refactor
 	else
 		version_type=irix
 	fi ;;
@@ -2444,9 +2638,9 @@
   dynamic_linker=no
   ;;
 
-# This must be Linux ELF.
+# This must be glibc/ELF.
 linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -2454,16 +2648,21 @@
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+
   # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-       [shlibpath_overrides_runpath=yes])])
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
+  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+    [lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+	 [lt_cv_shlibpath_overrides_runpath=yes])])
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+    ])
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
@@ -2472,7 +2671,7 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -2516,7 +2715,7 @@
   ;;
 
 newsos6)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=yes
@@ -2585,7 +2784,7 @@
   ;;
 
 solaris*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -2610,7 +2809,7 @@
   ;;
 
 sysv4 | sysv4.3*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -2634,7 +2833,7 @@
 
 sysv4*MP*)
   if test -d /usr/nec ;then
-    version_type=linux
+    version_type=linux # correct to gnu/linux during the next big refactor
     library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
     soname_spec='$libname${shared_ext}.$major'
     shlibpath_var=LD_LIBRARY_PATH
@@ -2665,7 +2864,7 @@
 
 tpf*)
   # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -2675,7 +2874,7 @@
   ;;
 
 uts4*)
-  version_type=linux
+  version_type=linux # correct to gnu/linux during the next big refactor
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
@@ -2717,6 +2916,8 @@
     The last name is the one that the linker finds with -lNAME]])
 _LT_DECL([], [soname_spec], [1],
     [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+    [Permission mode override for installation of shared libraries])
 _LT_DECL([], [postinstall_cmds], [2],
     [Command to use after installation of a shared archive])
 _LT_DECL([], [postuninstall_cmds], [2],
@@ -2829,6 +3030,7 @@
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
 
 AC_ARG_WITH([gnu-ld],
     [AS_HELP_STRING([--with-gnu-ld],
@@ -2950,6 +3152,11 @@
 esac
 reload_cmds='$LD$reload_flag -o $output$reload_objs'
 case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
   darwin*)
     if test "$GCC" = yes; then
       reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
@@ -2958,8 +3165,8 @@
     fi
     ;;
 esac
-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_DECL([], [reload_cmds], [2])dnl
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
 ])# _LT_CMD_RELOAD
 
 
@@ -3011,16 +3218,18 @@
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
 
-cegcc)
+cegcc*)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -3050,6 +3259,10 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
@@ -3058,11 +3271,11 @@
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
@@ -3083,7 +3296,7 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-# This must be Linux ELF.
+# This must be glibc/ELF.
 linux* | k*bsd*-gnu | kopensolaris*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
@@ -3162,6 +3375,21 @@
   ;;
 esac
 ])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -3169,7 +3397,11 @@
 _LT_DECL([], [deplibs_check_method], [1],
     [Method to check whether dependent libraries are shared objects])
 _LT_DECL([], [file_magic_cmd], [1],
-    [Command to use when deplibs_check_method == "file_magic"])
+    [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+    [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
 ])# _LT_CHECK_MAGIC_METHOD
 
 
@@ -3226,7 +3458,19 @@
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
-  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
   AC_SUBST([DUMPBIN])
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
@@ -3239,13 +3483,13 @@
 AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
   [lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
   cat conftest.out >&AS_MESSAGE_LOG_FD
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -3260,6 +3504,67 @@
 dnl AC_DEFUN([AM_PROG_NM], [])
 dnl AC_DEFUN([AC_PROG_NM], [])
 
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+    [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+  [lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
 
 # LT_LIB_M
 # --------
@@ -3268,7 +3573,7 @@
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
   # These system don't have libm, or don't need it
   ;;
 *-ncr-sysv4.3*)
@@ -3296,7 +3601,12 @@
 _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
 if test "$GCC" = yes; then
-  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+  case $cc_basename in
+  nvcc*)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+  esac
 
   _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
     lt_cv_prog_compiler_rtti_exceptions,
@@ -3313,6 +3623,7 @@
 m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
 AC_REQUIRE([LT_PATH_LD])dnl
 m4_require([_LT_DECL_SED])dnl
@@ -3380,8 +3691,8 @@
 lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
 # Handle CRLF in mingw tool chain
 opt_cr=
@@ -3405,6 +3716,7 @@
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK ['"\
 "     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
 "     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
 "     \$ 0!~/External *\|/{next};"\
 "     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
@@ -3417,6 +3729,7 @@
   else
     lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -3438,7 +3751,7 @@
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
@@ -3450,6 +3763,18 @@
       if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
 	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
 	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -3461,7 +3786,7 @@
 	  cat <<_LT_EOF >> conftest.$ac_ext
 
 /* The mapping between symbol names and symbols.  */
-const struct {
+LT@&t@_DLSYM_CONST struct {
   const char *name;
   void       *address;
 }
@@ -3487,15 +3812,15 @@
 _LT_EOF
 	  # Now try linking the two files.
 	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
 	  LIBS="conftstm.$ac_objext"
 	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
 	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
 	    pipe_works=yes
 	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
 	else
 	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
 	fi
@@ -3528,6 +3853,13 @@
   AC_MSG_RESULT(ok)
 fi
 
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
 _LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
     [Take the output of nm and produce a listing of raw symbols and C names])
 _LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
@@ -3538,6 +3870,8 @@
 _LT_DECL([global_symbol_to_c_name_address_lib_prefix],
     [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
     [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+    [Specify filename containing input files for $NM])
 ]) # _LT_CMD_GLOBAL_SYMBOLS
 
 
@@ -3549,7 +3883,6 @@
 _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 _LT_TAGVAR(lt_prog_compiler_static, $1)=
 
-AC_MSG_CHECKING([for $compiler option to produce PIC])
 m4_if([$1], [CXX], [
   # C++ specific cases for pic, static, wl, etc.
   if test "$GXX" = yes; then
@@ -3600,6 +3933,11 @@
       # DJGPP does not support shared libraries at all
       _LT_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
     interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
@@ -3649,6 +3987,12 @@
 	  ;;
 	esac
 	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	m4_if([$1], [GCJ], [],
+	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	;;
       dgux*)
 	case $cc_basename in
 	  ec++*)
@@ -3738,8 +4082,8 @@
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
-	  xlc* | xlC*)
-	    # IBM XL 8.0 on PPC
+	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
@@ -3801,7 +4145,7 @@
 	;;
       solaris*)
 	case $cc_basename in
-	  CC*)
+	  CC* | sunCC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -3905,6 +4249,12 @@
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
@@ -3947,6 +4297,15 @@
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+      fi
+      ;;
+    esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
@@ -4010,7 +4369,13 @@
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
 	;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
+      nagfor*)
+	# NAG Fortran compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -4022,25 +4387,40 @@
         # All Alpha code is PIC.
         _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
-      xl*)
-	# IBM XL C 8.0/Fortran 10.1 on PPC
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	;;
       *)
 	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	  ;;
 	*Sun\ C*)
 	  # Sun C 5.9
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+        *Intel*\ [[CF]]*Compiler*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ;;
+	*Portland\ Group*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
 	  ;;
 	esac
 	;;
@@ -4072,7 +4452,7 @@
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95*)
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
       *)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
@@ -4129,9 +4509,11 @@
     _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
     ;;
 esac
-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-	[How to pass a linker flag through the compiler])
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
 
 #
 # Check to make sure the PIC flag actually works.
@@ -4150,6 +4532,8 @@
 _LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
 	[Additional compiler flags for building library objects])
 
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
 #
 # Check to make sure the static flag actually works.
 #
@@ -4170,6 +4554,7 @@
 m4_defun([_LT_LINKER_SHLIBS],
 [AC_REQUIRE([LT_PATH_LD])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_DECL_SED])dnl
@@ -4178,30 +4563,40 @@
 AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
 m4_if([$1], [CXX], [
   _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   case $host_os in
   aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    # Also, AIX nm treats weak defined symbols like other global defined
+    # symbols, whereas GNU nm marks them as "W".
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
     ;;
   pw32*)
     _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
+    ;;
   cygwin* | mingw* | cegcc*)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
+    case $cc_basename in
+    cl*)
+      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+      ;;
+    esac
+    ;;
+  linux* | k*bsd*-gnu | gnu*)
     _LT_TAGVAR(link_all_deplibs, $1)=no
-  ;;
+    ;;
   *)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
+    ;;
   esac
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
 ], [
   runpath_var=
   _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -4216,7 +4611,6 @@
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_direct_absolute, $1)=no
   _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
   _LT_TAGVAR(hardcode_libdir_separator, $1)=
   _LT_TAGVAR(hardcode_minus_L, $1)=no
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
@@ -4261,13 +4655,39 @@
   openbsd*)
     with_gnu_ld=no
     ;;
-  linux* | k*bsd*-gnu)
+  linux* | k*bsd*-gnu | gnu*)
     _LT_TAGVAR(link_all_deplibs, $1)=no
     ;;
   esac
 
   _LT_TAGVAR(ld_shlibs, $1)=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
@@ -4301,11 +4721,12 @@
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** Warning: the GNU linker, at least up to release 2.19, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
 
 _LT_EOF
       fi
@@ -4341,10 +4762,12 @@
       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(always_export_symbols, $1)=no
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
 
       if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
         _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
@@ -4362,6 +4785,11 @@
       fi
       ;;
 
+    haiku*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
     interix[[3-9]]*)
       _LT_TAGVAR(hardcode_direct, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4387,15 +4815,16 @@
       if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
 	 && test "$tmp_diet" = no
       then
-	tmp_addflag=
+	tmp_addflag=' $pic_flag'
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -4406,13 +4835,17 @@
 	lf95*)				# Lahey Fortran 8.1
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
 	  tmp_sharedflag='--shared' ;;
-	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
@@ -4428,17 +4861,16 @@
         fi
 
 	case $cc_basename in
-	xlf*)
+	xlf* | bgf* | bgxlf* | mpixlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -4452,8 +4884,8 @@
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       fi
       ;;
 
@@ -4471,8 +4903,8 @@
 
 _LT_EOF
       elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4518,8 +4950,8 @@
 
     *)
       if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
       else
 	_LT_TAGVAR(ld_shlibs, $1)=no
       fi
@@ -4559,8 +4991,10 @@
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
 	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
@@ -4648,9 +5082,9 @@
 	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
         # Determine the default libpath from the value encoded in an
         # empty executable.
-        _LT_SYS_MODULE_PATH_AIX
+        _LT_SYS_MODULE_PATH_AIX([$1])
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
 	if test "$host_cpu" = ia64; then
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -4659,14 +5093,19 @@
 	else
 	 # Determine the default libpath from the value encoded in an
 	 # empty executable.
-	 _LT_SYS_MODULE_PATH_AIX
+	 _LT_SYS_MODULE_PATH_AIX([$1])
 	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 	  # Warning - without using the other run time loading flags,
 	  # -berok will link without error, but may produce a broken library.
 	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  fi
 	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
 	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -4698,20 +5137,64 @@
       # Microsoft Visual C++.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	_LT_TAGVAR(always_export_symbols, $1)=yes
+	_LT_TAGVAR(file_list_spec, $1)='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	# FIXME: Should let the user specify the lib program.
+	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+      esac
       ;;
 
     darwin* | rhapsody*)
@@ -4724,10 +5207,6 @@
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
 
-    freebsd1*)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
     # support.  Future versions do this automatically, but an explicit c++rt0.o
     # does not break anything, and helps significantly (at the cost of a little
@@ -4740,7 +5219,7 @@
       ;;
 
     # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
+    freebsd2.*)
       _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -4749,7 +5228,7 @@
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
     freebsd* | dragonfly*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_TAGVAR(hardcode_direct, $1)=yes
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4757,7 +5236,7 @@
 
     hpux9*)
       if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
@@ -4772,14 +5251,13 @@
       ;;
 
     hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
       fi
       if test "$with_gnu_ld" = no; then
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
 	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 	_LT_TAGVAR(hardcode_direct, $1)=yes
 	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
@@ -4791,16 +5269,16 @@
       ;;
 
     hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       else
@@ -4812,7 +5290,14 @@
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	m4_if($1, [], [
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  _LT_LINKER_OPTION([if $CC understands -b],
+	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
 	  ;;
 	esac
       fi
@@ -4840,19 +5325,34 @@
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        AC_LINK_IFELSE(int foo(void) {},
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-        )
-        LDFLAGS="$save_LDFLAGS"
+	# This should be the same for all languages, so no per-tag cache variable.
+	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+	  [lt_cv_irix_exported_symbol],
+	  [save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   AC_LINK_IFELSE(
+	     [AC_LANG_SOURCE(
+	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+			      [C++], [[int foo (void) { return 0; }]],
+			      [Fortran 77], [[
+      subroutine foo
+      end]],
+			      [Fortran], [[
+      subroutine foo
+      end]])])],
+	      [lt_cv_irix_exported_symbol=yes],
+	      [lt_cv_irix_exported_symbol=no])
+           LDFLAGS="$save_LDFLAGS"])
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4914,17 +5414,17 @@
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4934,13 +5434,13 @@
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -4953,9 +5453,9 @@
       _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
       if test "$GCC" = yes; then
 	wlarc='${wl}'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
       else
 	case `$CC -V 2>&1` in
 	*"Compilers 5.0"*)
@@ -5131,36 +5631,38 @@
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+	[$RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-        _LT_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-        then
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        else
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-        fi
-        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+	  _LT_TAGVAR(allow_undefined_flag, $1)=
+	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+	  then
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	  else
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  fi
+	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+	])
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
       ;;
     esac
   fi
@@ -5197,9 +5699,6 @@
 _LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
     [Flag to hardcode $libdir into a binary during linking.
     This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
-    [[If ld is used when linking, flag to hardcode $libdir into a binary
-    during linking.  This must work even if $libdir does not exist]])
 _LT_TAGDECL([], [hardcode_libdir_separator], [1],
     [Whether we need a single "-rpath" flag with a separated argument])
 _LT_TAGDECL([], [hardcode_direct], [0],
@@ -5225,8 +5724,6 @@
     to runtime path list])
 _LT_TAGDECL([], [link_all_deplibs], [0],
     [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [fix_srcfile_path], [1],
-    [Fix the shell variable $srcfile for the compiler])
 _LT_TAGDECL([], [always_export_symbols], [0],
     [Set to "yes" if exported symbols are required])
 _LT_TAGDECL([], [export_symbols_cmds], [2],
@@ -5237,6 +5734,8 @@
     [Symbols that must always be exported])
 _LT_TAGDECL([], [prelink_cmds], [2],
     [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+    [Commands necessary for finishing linking programs])
 _LT_TAGDECL([], [file_list_spec], [1],
     [Specify filename containing input files])
 dnl FIXME: Not yet implemented
@@ -5330,14 +5829,15 @@
 ])# _LT_LANG_C_CONFIG
 
 
-# _LT_PROG_CXX
-# ------------
-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
-# compiler, we have our own version here.
-m4_defun([_LT_PROG_CXX],
-[
-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
-AC_PROG_CXX
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
 if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
     ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
     (test "X$CXX" != "Xg++"))) ; then
@@ -5345,22 +5845,6 @@
 else
   _lt_caught_CXX_error=yes
 fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_CXX
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_CXX], [])
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[AC_REQUIRE([_LT_PROG_CXX])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
 
 AC_LANG_PUSH(C++)
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -5372,7 +5856,6 @@
 _LT_TAGVAR(hardcode_direct, $1)=no
 _LT_TAGVAR(hardcode_direct_absolute, $1)=no
 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
 _LT_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_TAGVAR(hardcode_minus_L, $1)=no
 _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
@@ -5382,6 +5865,8 @@
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -5413,6 +5898,7 @@
 
   # Allow CC to be a program name with arguments.
   lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
   lt_save_LD=$LD
   lt_save_GCC=$GCC
   GCC=$GXX
@@ -5430,6 +5916,7 @@
   fi
   test -z "${LDCXX+set}" || LD=$LDCXX
   CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
   compiler=$CC
   _LT_TAGVAR(compiler, $1)=$CC
   _LT_CC_BASENAME([$compiler])
@@ -5451,8 +5938,8 @@
       # Check if GNU C++ uses GNU ld as the underlying linker, since the
       # archiving commands below assume that GNU ld is being used.
       if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
 
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
         _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5484,7 +5971,7 @@
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
       # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
     else
       GXX=no
@@ -5593,10 +6080,10 @@
           _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
           # Determine the default libpath from the value encoded in an empty
           # executable.
-          _LT_SYS_MODULE_PATH_AIX
+          _LT_SYS_MODULE_PATH_AIX([$1])
           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
         else
           if test "$host_cpu" = ia64; then
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -5605,14 +6092,19 @@
           else
 	    # Determine the default libpath from the value encoded in an
 	    # empty executable.
-	    _LT_SYS_MODULE_PATH_AIX
+	    _LT_SYS_MODULE_PATH_AIX([$1])
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 	    # Warning - without using the other run time loading flags,
 	    # -berok will link without error, but may produce a broken library.
 	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    # Exported symbols can be pulled into shared objects from archives
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    if test "$with_gnu_ld" = yes; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    fi
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	    # This is similar to how AIX traditionally builds its shared
 	    # libraries.
@@ -5642,28 +6134,75 @@
         ;;
 
       cygwin* | mingw* | pw32* | cegcc*)
-        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-        # as there is no search path for DLLs.
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-        _LT_TAGVAR(always_export_symbols, $1)=no
-        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=yes
+	  _LT_TAGVAR(file_list_spec, $1)='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=".dll"
+	  # FIXME: Setting linknames here is a bad hack.
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	    else
+	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	    fi~
+	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	    linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	  # Don't use ranlib
+	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	    lt_tool_outputfile="@TOOL_OUTPUT@"~
+	    case $lt_outputfile in
+	      *.exe|*.EXE) ;;
+	      *)
+		lt_outputfile="$lt_outputfile.exe"
+		lt_tool_outputfile="$lt_tool_outputfile.exe"
+		;;
+	    esac~
+	    func_to_tool_file "$lt_outputfile"~
+	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	      $RM "$lt_outputfile.manifest";
+	    fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=no
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
 
-        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-          # If the export-symbols file already is a .def file (1st line
-          # is EXPORTS), use it as is; otherwise, prepend...
-          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    cp $export_symbols $output_objdir/$soname.def;
-          else
-	    echo EXPORTS > $output_objdir/$soname.def;
-	    cat $export_symbols >> $output_objdir/$soname.def;
-          fi~
-          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-        else
-          _LT_TAGVAR(ld_shlibs, $1)=no
-        fi
-        ;;
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file (1st line
+	    # is EXPORTS), use it as is; otherwise, prepend...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      cp $export_symbols $output_objdir/$soname.def;
+	    else
+	      echo EXPORTS > $output_objdir/$soname.def;
+	      cat $export_symbols >> $output_objdir/$soname.def;
+	    fi~
+	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	  ;;
+	esac
+	;;
       darwin* | rhapsody*)
         _LT_DARWIN_LINKER_FEATURES($1)
 	;;
@@ -5686,7 +6225,7 @@
         esac
         ;;
 
-      freebsd[[12]]*)
+      freebsd2.*)
         # C++ shared libraries reported to be fairly broken before
 	# switch to ELF
         _LT_TAGVAR(ld_shlibs, $1)=no
@@ -5705,6 +6244,11 @@
       gnu*)
         ;;
 
+      haiku*)
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        ;;
+
       hpux9*)
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -5729,11 +6273,11 @@
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
             ;;
           *)
             if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
             else
               # FIXME: insert proper C++ library support
               _LT_TAGVAR(ld_shlibs, $1)=no
@@ -5794,7 +6338,7 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
           *)
 	    if test "$GXX" = yes; then
@@ -5804,10 +6348,10 @@
 	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          ia64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	          *)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	            ;;
 	        esac
 	      fi
@@ -5837,7 +6381,7 @@
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -5848,9 +6392,9 @@
           *)
 	    if test "$GXX" = yes; then
 	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
 	      fi
 	    fi
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
@@ -5879,7 +6423,7 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5916,26 +6460,26 @@
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
-	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
 	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
 	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
 		$RANLIB $oldlib'
 	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
-	    *) # Version 6 will use weak symbols
+	    *) # Version 6 and above use weak symbols
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
@@ -5943,7 +6487,7 @@
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
@@ -5962,9 +6506,9 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
 	    ;;
-	  xl*)
+	  xl* | mpixl* | bgxl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -5984,13 +6528,13 @@
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
 	      _LT_TAGVAR(compiler_needs_object, $1)=yes
 
 	      # Not sure whether something based on
 	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
 	      # would be better.
-	      output_verbose_link_cmd='echo'
+	      output_verbose_link_cmd='func_echo_all'
 
 	      # Archives containing C++ object files must be created using
 	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6059,7 +6603,7 @@
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
 	  fi
-	  output_verbose_link_cmd=echo
+	  output_verbose_link_cmd=func_echo_all
 	else
 	  _LT_TAGVAR(ld_shlibs, $1)=no
 	fi
@@ -6094,15 +6638,15 @@
 	    case $host in
 	      osf3*)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 		;;
 	      *)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
 	          $RM $lib.exp'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
 		;;
@@ -6118,17 +6662,17 @@
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
 	    ;;
 	  *)
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
 	      case $host in
 	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	      esac
 
@@ -6138,7 +6682,7 @@
 	      # Commands to make compiler produce verbose output that lists
 	      # what "hidden" libraries, object files and flags are used when
 	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 
 	    else
 	      # FIXME: insert proper C++ library support
@@ -6174,7 +6718,7 @@
 
       solaris*)
         case $cc_basename in
-          CC*)
+          CC* | sunCC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
 	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
@@ -6195,7 +6739,7 @@
 	    esac
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 
-	    output_verbose_link_cmd='echo'
+	    output_verbose_link_cmd='func_echo_all'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6215,14 +6759,14 @@
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
 	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
 
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      else
 	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
 	        # platform.
@@ -6233,7 +6777,7 @@
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
 	      fi
 
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
@@ -6287,6 +6831,10 @@
           CC*)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
+	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+	      '"$_LT_TAGVAR(reload_cmds, $1)"
 	    ;;
 	  *)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -6342,6 +6890,7 @@
   fi # test -n "$compiler"
 
   CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
   LDCXX=$LD
   LD=$lt_save_LD
   GCC=$lt_save_GCC
@@ -6356,6 +6905,29 @@
 ])# _LT_LANG_CXX_CONFIG
 
 
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
 # _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
 # ---------------------------------
 # Figure out "hidden" library dependencies from verbose
@@ -6364,6 +6936,7 @@
 # objects, libraries and library flags.
 m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
 [m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
 # Dependencies to place before and after the object being linked:
 _LT_TAGVAR(predep_objects, $1)=
 _LT_TAGVAR(postdep_objects, $1)=
@@ -6413,7 +6986,20 @@
   }
 };
 _LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
 ])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
 dnl Parse the compiler output and extract the necessary
 dnl objects, libraries and library flags.
 if AC_TRY_EVAL(ac_compile); then
@@ -6425,7 +7011,7 @@
   pre_test_object_deps_done=no
 
   for p in `eval "$output_verbose_link_cmd"`; do
-    case $p in
+    case ${prev}${p} in
 
     -L* | -R* | -l*)
        # Some compilers place space between "-{L,R}" and the path.
@@ -6434,13 +7020,22 @@
           test $p = "-R"; then
 	 prev=$p
 	 continue
-       else
-	 prev=
        fi
 
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
        if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
+	 case ${prev} in
+	 -L | -R)
 	   # Internal compiler library paths should come after those
 	   # provided the user.  The postdeps already come after the
 	   # user supplied libs so there is no need to process them.
@@ -6460,8 +7055,10 @@
 	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
 	 fi
        fi
+       prev=
        ;;
 
+    *.lto.$objext) ;; # Ignore GCC LTO objects
     *.$objext)
        # This assumes that the test object file only shows up
        # once in the compiler output.
@@ -6497,6 +7094,7 @@
 fi
 
 $RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
 
 # PORTME: override above test on systems where it is broken
 m4_if([$1], [CXX],
@@ -6533,7 +7131,7 @@
 
 solaris*)
   case $cc_basename in
-  CC*)
+  CC* | sunCC*)
     # The more standards-conforming stlport4 library is
     # incompatible with the Cstd library. Avoid specifying
     # it if it's in CXXFLAGS. Ignore libCrun as
@@ -6577,32 +7175,16 @@
 ])# _LT_SYS_HIDDEN_LIBDEPS
 
 
-# _LT_PROG_F77
-# ------------
-# Since AC_PROG_F77 is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_F77],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
-AC_PROG_F77
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_F77
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_F77], [])
-
-
 # _LT_LANG_F77_CONFIG([TAG])
 # --------------------------
 # Ensure that the configuration variables for a Fortran 77 compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_F77_CONFIG],
-[AC_REQUIRE([_LT_PROG_F77])dnl
-AC_LANG_PUSH(Fortran 77)
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6612,7 +7194,6 @@
 _LT_TAGVAR(hardcode_direct, $1)=no
 _LT_TAGVAR(hardcode_direct_absolute, $1)=no
 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
 _LT_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_TAGVAR(hardcode_minus_L, $1)=no
 _LT_TAGVAR(hardcode_automatic, $1)=no
@@ -6621,6 +7202,8 @@
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6660,7 +7243,9 @@
   # Allow CC to be a program name with arguments.
   lt_save_CC="$CC"
   lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
   CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
   compiler=$CC
   _LT_TAGVAR(compiler, $1)=$CC
   _LT_CC_BASENAME([$compiler])
@@ -6714,38 +7299,24 @@
 
   GCC=$lt_save_GCC
   CC="$lt_save_CC"
+  CFLAGS="$lt_save_CFLAGS"
 fi # test "$_lt_disable_F77" != yes
 
 AC_LANG_POP
 ])# _LT_LANG_F77_CONFIG
 
 
-# _LT_PROG_FC
-# -----------
-# Since AC_PROG_FC is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_FC],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
-AC_PROG_FC
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_FC
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_FC], [])
-
-
 # _LT_LANG_FC_CONFIG([TAG])
 # -------------------------
 # Ensure that the configuration variables for a Fortran compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_FC_CONFIG],
-[AC_REQUIRE([_LT_PROG_FC])dnl
-AC_LANG_PUSH(Fortran)
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6755,7 +7326,6 @@
 _LT_TAGVAR(hardcode_direct, $1)=no
 _LT_TAGVAR(hardcode_direct_absolute, $1)=no
 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
 _LT_TAGVAR(hardcode_libdir_separator, $1)=
 _LT_TAGVAR(hardcode_minus_L, $1)=no
 _LT_TAGVAR(hardcode_automatic, $1)=no
@@ -6764,6 +7334,8 @@
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6803,7 +7375,9 @@
   # Allow CC to be a program name with arguments.
   lt_save_CC="$CC"
   lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
   CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
   compiler=$CC
   GCC=$ac_cv_fc_compiler_gnu
 
@@ -6859,7 +7433,8 @@
   fi # test -n "$compiler"
 
   GCC=$lt_save_GCC
-  CC="$lt_save_CC"
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
 fi # test "$_lt_disable_FC" != yes
 
 AC_LANG_POP
@@ -6896,10 +7471,12 @@
 _LT_LINKER_BOILERPLATE
 
 # Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=yes
 CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
 _LT_TAGVAR(LD, $1)="$LD"
@@ -6909,6 +7486,8 @@
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
@@ -6928,10 +7507,82 @@
 AC_LANG_RESTORE
 
 GCC=$lt_save_GCC
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
 ])# _LT_LANG_GCJ_CONFIG
 
 
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
 # _LT_LANG_RC_CONFIG([TAG])
 # -------------------------
 # Ensure that the configuration variables for the Windows resource compiler
@@ -6963,9 +7614,11 @@
 
 # Allow CC to be a program name with arguments.
 lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
 lt_save_GCC=$GCC
 GCC=
 CC=${RC-"windres"}
+CFLAGS=
 compiler=$CC
 _LT_TAGVAR(compiler, $1)=$CC
 _LT_CC_BASENAME([$compiler])
@@ -6978,7 +7631,8 @@
 
 GCC=$lt_save_GCC
 AC_LANG_RESTORE
-CC="$lt_save_CC"
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
 ])# _LT_LANG_RC_CONFIG
 
 
@@ -6998,6 +7652,13 @@
 dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
 
 
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
 # LT_PROG_RC
 # ----------
 AC_DEFUN([LT_PROG_RC],
@@ -7037,6 +7698,15 @@
 AC_SUBST([OBJDUMP])
 ])
 
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
 
 # _LT_DECL_SED
 # ------------
@@ -7130,8 +7800,8 @@
 # Try some XSI features
 xsi_shell=no
 ( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
     && eval 'test $(( 1 + 1 )) -eq 2 \
     && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
   && xsi_shell=yes
@@ -7170,208 +7840,162 @@
 ])# _LT_CHECK_SHELL_FEATURES
 
 
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-m4_defun([_LT_PROG_XSI_SHELLFNS],
-[case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $[*] ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-dnl func_dirname_and_basename
-dnl A portable version of this function is already defined in general.m4sh
-dnl so there is no need for it here.
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[[^=]]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$[@]"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]+=\$[2]"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]=\$$[1]\$[2]"
-}
-
-_LT_EOF
-    ;;
-  esac
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
 ])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary parameter first.
+    func_stripname_result=${3}
+    func_stripname_result=${func_stripname_result#"${1}"}
+    func_stripname_result=${func_stripname_result%"${2}"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+    func_split_long_opt_name=${1%%=*}
+    func_split_long_opt_arg=${1#*=}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+    func_split_short_opt_arg=${1#??}
+    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+    case ${1} in
+      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+      *)    func_lo2o_result=${1} ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
+
+  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
+
+  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+    func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+         [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+         [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4
index 34151a3..5d9acd8 100644
--- a/m4/ltoptions.m4
+++ b/m4/ltoptions.m4
@@ -1,13 +1,14 @@
 # Helper functions for option handling.                    -*- Autoconf -*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+#   Inc.
 #   Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 6 ltoptions.m4
+# serial 7 ltoptions.m4
 
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -125,7 +126,7 @@
 [enable_win32_dll=yes
 
 case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
   AC_CHECK_TOOL(AS, as, false)
   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
   AC_CHECK_TOOL(OBJDUMP, objdump, false)
@@ -133,13 +134,13 @@
 esac
 
 test -z "$AS" && AS=as
-_LT_DECL([], [AS],      [0], [Assembler program])dnl
+_LT_DECL([], [AS],      [1], [Assembler program])dnl
 
 test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
 
 test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
 ])# win32-dll
 
 AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
@@ -325,9 +326,24 @@
 # MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
 m4_define([_LT_WITH_PIC],
 [AC_ARG_WITH([pic],
-    [AS_HELP_STRING([--with-pic],
+    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
 	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
+    [lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
     [pic_mode=default])
 
 test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
diff --git a/m4/ltversion.m4 b/m4/ltversion.m4
index f3c5309..07a8602 100644
--- a/m4/ltversion.m4
+++ b/m4/ltversion.m4
@@ -7,17 +7,17 @@
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# Generated from ltversion.in.
+# @configure_input@
 
-# serial 3017 ltversion.m4
+# serial 3337 ltversion.m4
 # This file is part of GNU Libtool
 
-m4_define([LT_PACKAGE_VERSION], [2.2.6b])
-m4_define([LT_PACKAGE_REVISION], [1.3017])
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
 
 AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.6b'
-macro_revision='1.3017'
+[macro_version='2.4.2'
+macro_revision='1.3337'
 _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 _LT_DECL(, macro_revision, 0)
 ])
diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4
index 637bb20..c573da9 100644
--- a/m4/lt~obsolete.m4
+++ b/m4/lt~obsolete.m4
@@ -1,13 +1,13 @@
 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
 #
-#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
 #   Written by Scott James Remnant, 2004.
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 4 lt~obsolete.m4
+# serial 5 lt~obsolete.m4
 
 # These exist entirely to fool aclocal when bootstrapping libtool.
 #
@@ -77,7 +77,6 @@
 m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
 m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
 m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
 m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
 m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
 m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
@@ -90,3 +89,10 @@
 m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
 m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
 m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
diff --git a/missing b/missing
index 28055d2..86a8fc3 100755
--- a/missing
+++ b/missing
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2012-01-06.13; # UTC
 
 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
+# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -84,7 +84,6 @@
   help2man     touch the output file
   lex          create \`lex.yy.c', if possible, from existing .c
   makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
 Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
@@ -122,15 +121,6 @@
     # Not GNU programs, they don't have --version.
     ;;
 
-  tar*)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
   *)
     if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
        # We have it, but it failed.
@@ -226,7 +216,7 @@
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
     if test $# -ne 1; then
-        eval LASTARG="\${$#}"
+        eval LASTARG=\${$#}
 	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
@@ -256,7 +246,7 @@
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
     if test $# -ne 1; then
-        eval LASTARG="\${$#}"
+        eval LASTARG=\${$#}
 	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
@@ -318,41 +308,6 @@
     touch $file
     ;;
 
-  tar*)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
   *)
     echo 1>&2 "\
 WARNING: \`$1' is needed, and is $msg.
diff --git a/src/Makefile.in b/src/Makefile.in
index f073530..0dbb771 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -36,10 +36,10 @@
 subdir = src
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -109,6 +109,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -118,11 +119,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -137,6 +133,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -162,6 +159,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -196,7 +194,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -461,10 +458,15 @@
 
 installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/bin/Makefile.am b/src/bin/Makefile.am
index 13fc64c..43097fa 100644
--- a/src/bin/Makefile.am
+++ b/src/bin/Makefile.am
@@ -3,9 +3,9 @@
 
 if HAVE_BIN
 bin_PROGRAMS = fstarcsort fstclosure fstcompile fstcompose fstconcat \
-fstconnect fstconvert fstdeterminize fstdifference fstdraw fstencode \
-fstepsnormalize fstequal fstequivalent fstinfo fstintersect fstinvert \
-fstmap fstminimize fstprint fstproject fstprune fstpush fstrandgen \
+fstconnect fstconvert fstdeterminize fstdifference fstdraw \
+fstencode fstepsnormalize fstequal fstequivalent fstinfo fstintersect \
+fstinvert fstmap fstminimize fstprint fstproject fstprune fstpush fstrandgen \
 fstrelabel fstreplace fstreverse fstreweight fstrmepsilon \
 fstshortestdistance fstshortestpath fstsymbols fstsynchronize fsttopsort \
 fstunion
@@ -28,6 +28,8 @@
 
 fstdifference_SOURCES = fstdifference.cc
 
+# fstdisambiguate_SOURCES = fstdisambiguate.cc
+
 fstdraw_SOURCES = fstdraw.cc
 
 fstencode_SOURCES = fstencode.cc
diff --git a/src/bin/Makefile.in b/src/bin/Makefile.in
index 5d27164..776d494 100644
--- a/src/bin/Makefile.in
+++ b/src/bin/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -56,10 +56,10 @@
 subdir = src/bin
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -325,6 +325,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -334,11 +335,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -353,6 +349,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -378,6 +375,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -412,7 +410,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -439,6 +436,8 @@
 @HAVE_BIN_TRUE@fstconvert_SOURCES = fstconvert.cc
 @HAVE_BIN_TRUE@fstdeterminize_SOURCES = fstdeterminize.cc
 @HAVE_BIN_TRUE@fstdifference_SOURCES = fstdifference.cc
+
+# fstdisambiguate_SOURCES = fstdisambiguate.cc
 @HAVE_BIN_TRUE@fstdraw_SOURCES = fstdraw.cc
 @HAVE_BIN_TRUE@fstencode_SOURCES = fstencode.cc
 @HAVE_BIN_TRUE@fstepsnormalize_SOURCES = fstepsnormalize.cc
@@ -542,109 +541,109 @@
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
-fstarcsort$(EXEEXT): $(fstarcsort_OBJECTS) $(fstarcsort_DEPENDENCIES) 
+fstarcsort$(EXEEXT): $(fstarcsort_OBJECTS) $(fstarcsort_DEPENDENCIES) $(EXTRA_fstarcsort_DEPENDENCIES) 
 	@rm -f fstarcsort$(EXEEXT)
 	$(CXXLINK) $(fstarcsort_OBJECTS) $(fstarcsort_LDADD) $(LIBS)
-fstclosure$(EXEEXT): $(fstclosure_OBJECTS) $(fstclosure_DEPENDENCIES) 
+fstclosure$(EXEEXT): $(fstclosure_OBJECTS) $(fstclosure_DEPENDENCIES) $(EXTRA_fstclosure_DEPENDENCIES) 
 	@rm -f fstclosure$(EXEEXT)
 	$(CXXLINK) $(fstclosure_OBJECTS) $(fstclosure_LDADD) $(LIBS)
-fstcompile$(EXEEXT): $(fstcompile_OBJECTS) $(fstcompile_DEPENDENCIES) 
+fstcompile$(EXEEXT): $(fstcompile_OBJECTS) $(fstcompile_DEPENDENCIES) $(EXTRA_fstcompile_DEPENDENCIES) 
 	@rm -f fstcompile$(EXEEXT)
 	$(CXXLINK) $(fstcompile_OBJECTS) $(fstcompile_LDADD) $(LIBS)
-fstcompose$(EXEEXT): $(fstcompose_OBJECTS) $(fstcompose_DEPENDENCIES) 
+fstcompose$(EXEEXT): $(fstcompose_OBJECTS) $(fstcompose_DEPENDENCIES) $(EXTRA_fstcompose_DEPENDENCIES) 
 	@rm -f fstcompose$(EXEEXT)
 	$(CXXLINK) $(fstcompose_OBJECTS) $(fstcompose_LDADD) $(LIBS)
-fstconcat$(EXEEXT): $(fstconcat_OBJECTS) $(fstconcat_DEPENDENCIES) 
+fstconcat$(EXEEXT): $(fstconcat_OBJECTS) $(fstconcat_DEPENDENCIES) $(EXTRA_fstconcat_DEPENDENCIES) 
 	@rm -f fstconcat$(EXEEXT)
 	$(CXXLINK) $(fstconcat_OBJECTS) $(fstconcat_LDADD) $(LIBS)
-fstconnect$(EXEEXT): $(fstconnect_OBJECTS) $(fstconnect_DEPENDENCIES) 
+fstconnect$(EXEEXT): $(fstconnect_OBJECTS) $(fstconnect_DEPENDENCIES) $(EXTRA_fstconnect_DEPENDENCIES) 
 	@rm -f fstconnect$(EXEEXT)
 	$(CXXLINK) $(fstconnect_OBJECTS) $(fstconnect_LDADD) $(LIBS)
-fstconvert$(EXEEXT): $(fstconvert_OBJECTS) $(fstconvert_DEPENDENCIES) 
+fstconvert$(EXEEXT): $(fstconvert_OBJECTS) $(fstconvert_DEPENDENCIES) $(EXTRA_fstconvert_DEPENDENCIES) 
 	@rm -f fstconvert$(EXEEXT)
 	$(CXXLINK) $(fstconvert_OBJECTS) $(fstconvert_LDADD) $(LIBS)
-fstdeterminize$(EXEEXT): $(fstdeterminize_OBJECTS) $(fstdeterminize_DEPENDENCIES) 
+fstdeterminize$(EXEEXT): $(fstdeterminize_OBJECTS) $(fstdeterminize_DEPENDENCIES) $(EXTRA_fstdeterminize_DEPENDENCIES) 
 	@rm -f fstdeterminize$(EXEEXT)
 	$(CXXLINK) $(fstdeterminize_OBJECTS) $(fstdeterminize_LDADD) $(LIBS)
-fstdifference$(EXEEXT): $(fstdifference_OBJECTS) $(fstdifference_DEPENDENCIES) 
+fstdifference$(EXEEXT): $(fstdifference_OBJECTS) $(fstdifference_DEPENDENCIES) $(EXTRA_fstdifference_DEPENDENCIES) 
 	@rm -f fstdifference$(EXEEXT)
 	$(CXXLINK) $(fstdifference_OBJECTS) $(fstdifference_LDADD) $(LIBS)
-fstdraw$(EXEEXT): $(fstdraw_OBJECTS) $(fstdraw_DEPENDENCIES) 
+fstdraw$(EXEEXT): $(fstdraw_OBJECTS) $(fstdraw_DEPENDENCIES) $(EXTRA_fstdraw_DEPENDENCIES) 
 	@rm -f fstdraw$(EXEEXT)
 	$(CXXLINK) $(fstdraw_OBJECTS) $(fstdraw_LDADD) $(LIBS)
-fstencode$(EXEEXT): $(fstencode_OBJECTS) $(fstencode_DEPENDENCIES) 
+fstencode$(EXEEXT): $(fstencode_OBJECTS) $(fstencode_DEPENDENCIES) $(EXTRA_fstencode_DEPENDENCIES) 
 	@rm -f fstencode$(EXEEXT)
 	$(CXXLINK) $(fstencode_OBJECTS) $(fstencode_LDADD) $(LIBS)
-fstepsnormalize$(EXEEXT): $(fstepsnormalize_OBJECTS) $(fstepsnormalize_DEPENDENCIES) 
+fstepsnormalize$(EXEEXT): $(fstepsnormalize_OBJECTS) $(fstepsnormalize_DEPENDENCIES) $(EXTRA_fstepsnormalize_DEPENDENCIES) 
 	@rm -f fstepsnormalize$(EXEEXT)
 	$(CXXLINK) $(fstepsnormalize_OBJECTS) $(fstepsnormalize_LDADD) $(LIBS)
-fstequal$(EXEEXT): $(fstequal_OBJECTS) $(fstequal_DEPENDENCIES) 
+fstequal$(EXEEXT): $(fstequal_OBJECTS) $(fstequal_DEPENDENCIES) $(EXTRA_fstequal_DEPENDENCIES) 
 	@rm -f fstequal$(EXEEXT)
 	$(CXXLINK) $(fstequal_OBJECTS) $(fstequal_LDADD) $(LIBS)
-fstequivalent$(EXEEXT): $(fstequivalent_OBJECTS) $(fstequivalent_DEPENDENCIES) 
+fstequivalent$(EXEEXT): $(fstequivalent_OBJECTS) $(fstequivalent_DEPENDENCIES) $(EXTRA_fstequivalent_DEPENDENCIES) 
 	@rm -f fstequivalent$(EXEEXT)
 	$(CXXLINK) $(fstequivalent_OBJECTS) $(fstequivalent_LDADD) $(LIBS)
-fstinfo$(EXEEXT): $(fstinfo_OBJECTS) $(fstinfo_DEPENDENCIES) 
+fstinfo$(EXEEXT): $(fstinfo_OBJECTS) $(fstinfo_DEPENDENCIES) $(EXTRA_fstinfo_DEPENDENCIES) 
 	@rm -f fstinfo$(EXEEXT)
 	$(CXXLINK) $(fstinfo_OBJECTS) $(fstinfo_LDADD) $(LIBS)
-fstintersect$(EXEEXT): $(fstintersect_OBJECTS) $(fstintersect_DEPENDENCIES) 
+fstintersect$(EXEEXT): $(fstintersect_OBJECTS) $(fstintersect_DEPENDENCIES) $(EXTRA_fstintersect_DEPENDENCIES) 
 	@rm -f fstintersect$(EXEEXT)
 	$(CXXLINK) $(fstintersect_OBJECTS) $(fstintersect_LDADD) $(LIBS)
-fstinvert$(EXEEXT): $(fstinvert_OBJECTS) $(fstinvert_DEPENDENCIES) 
+fstinvert$(EXEEXT): $(fstinvert_OBJECTS) $(fstinvert_DEPENDENCIES) $(EXTRA_fstinvert_DEPENDENCIES) 
 	@rm -f fstinvert$(EXEEXT)
 	$(CXXLINK) $(fstinvert_OBJECTS) $(fstinvert_LDADD) $(LIBS)
-fstmap$(EXEEXT): $(fstmap_OBJECTS) $(fstmap_DEPENDENCIES) 
+fstmap$(EXEEXT): $(fstmap_OBJECTS) $(fstmap_DEPENDENCIES) $(EXTRA_fstmap_DEPENDENCIES) 
 	@rm -f fstmap$(EXEEXT)
 	$(CXXLINK) $(fstmap_OBJECTS) $(fstmap_LDADD) $(LIBS)
-fstminimize$(EXEEXT): $(fstminimize_OBJECTS) $(fstminimize_DEPENDENCIES) 
+fstminimize$(EXEEXT): $(fstminimize_OBJECTS) $(fstminimize_DEPENDENCIES) $(EXTRA_fstminimize_DEPENDENCIES) 
 	@rm -f fstminimize$(EXEEXT)
 	$(CXXLINK) $(fstminimize_OBJECTS) $(fstminimize_LDADD) $(LIBS)
-fstprint$(EXEEXT): $(fstprint_OBJECTS) $(fstprint_DEPENDENCIES) 
+fstprint$(EXEEXT): $(fstprint_OBJECTS) $(fstprint_DEPENDENCIES) $(EXTRA_fstprint_DEPENDENCIES) 
 	@rm -f fstprint$(EXEEXT)
 	$(CXXLINK) $(fstprint_OBJECTS) $(fstprint_LDADD) $(LIBS)
-fstproject$(EXEEXT): $(fstproject_OBJECTS) $(fstproject_DEPENDENCIES) 
+fstproject$(EXEEXT): $(fstproject_OBJECTS) $(fstproject_DEPENDENCIES) $(EXTRA_fstproject_DEPENDENCIES) 
 	@rm -f fstproject$(EXEEXT)
 	$(CXXLINK) $(fstproject_OBJECTS) $(fstproject_LDADD) $(LIBS)
-fstprune$(EXEEXT): $(fstprune_OBJECTS) $(fstprune_DEPENDENCIES) 
+fstprune$(EXEEXT): $(fstprune_OBJECTS) $(fstprune_DEPENDENCIES) $(EXTRA_fstprune_DEPENDENCIES) 
 	@rm -f fstprune$(EXEEXT)
 	$(CXXLINK) $(fstprune_OBJECTS) $(fstprune_LDADD) $(LIBS)
-fstpush$(EXEEXT): $(fstpush_OBJECTS) $(fstpush_DEPENDENCIES) 
+fstpush$(EXEEXT): $(fstpush_OBJECTS) $(fstpush_DEPENDENCIES) $(EXTRA_fstpush_DEPENDENCIES) 
 	@rm -f fstpush$(EXEEXT)
 	$(CXXLINK) $(fstpush_OBJECTS) $(fstpush_LDADD) $(LIBS)
-fstrandgen$(EXEEXT): $(fstrandgen_OBJECTS) $(fstrandgen_DEPENDENCIES) 
+fstrandgen$(EXEEXT): $(fstrandgen_OBJECTS) $(fstrandgen_DEPENDENCIES) $(EXTRA_fstrandgen_DEPENDENCIES) 
 	@rm -f fstrandgen$(EXEEXT)
 	$(CXXLINK) $(fstrandgen_OBJECTS) $(fstrandgen_LDADD) $(LIBS)
-fstrelabel$(EXEEXT): $(fstrelabel_OBJECTS) $(fstrelabel_DEPENDENCIES) 
+fstrelabel$(EXEEXT): $(fstrelabel_OBJECTS) $(fstrelabel_DEPENDENCIES) $(EXTRA_fstrelabel_DEPENDENCIES) 
 	@rm -f fstrelabel$(EXEEXT)
 	$(CXXLINK) $(fstrelabel_OBJECTS) $(fstrelabel_LDADD) $(LIBS)
-fstreplace$(EXEEXT): $(fstreplace_OBJECTS) $(fstreplace_DEPENDENCIES) 
+fstreplace$(EXEEXT): $(fstreplace_OBJECTS) $(fstreplace_DEPENDENCIES) $(EXTRA_fstreplace_DEPENDENCIES) 
 	@rm -f fstreplace$(EXEEXT)
 	$(CXXLINK) $(fstreplace_OBJECTS) $(fstreplace_LDADD) $(LIBS)
-fstreverse$(EXEEXT): $(fstreverse_OBJECTS) $(fstreverse_DEPENDENCIES) 
+fstreverse$(EXEEXT): $(fstreverse_OBJECTS) $(fstreverse_DEPENDENCIES) $(EXTRA_fstreverse_DEPENDENCIES) 
 	@rm -f fstreverse$(EXEEXT)
 	$(CXXLINK) $(fstreverse_OBJECTS) $(fstreverse_LDADD) $(LIBS)
-fstreweight$(EXEEXT): $(fstreweight_OBJECTS) $(fstreweight_DEPENDENCIES) 
+fstreweight$(EXEEXT): $(fstreweight_OBJECTS) $(fstreweight_DEPENDENCIES) $(EXTRA_fstreweight_DEPENDENCIES) 
 	@rm -f fstreweight$(EXEEXT)
 	$(CXXLINK) $(fstreweight_OBJECTS) $(fstreweight_LDADD) $(LIBS)
-fstrmepsilon$(EXEEXT): $(fstrmepsilon_OBJECTS) $(fstrmepsilon_DEPENDENCIES) 
+fstrmepsilon$(EXEEXT): $(fstrmepsilon_OBJECTS) $(fstrmepsilon_DEPENDENCIES) $(EXTRA_fstrmepsilon_DEPENDENCIES) 
 	@rm -f fstrmepsilon$(EXEEXT)
 	$(CXXLINK) $(fstrmepsilon_OBJECTS) $(fstrmepsilon_LDADD) $(LIBS)
-fstshortestdistance$(EXEEXT): $(fstshortestdistance_OBJECTS) $(fstshortestdistance_DEPENDENCIES) 
+fstshortestdistance$(EXEEXT): $(fstshortestdistance_OBJECTS) $(fstshortestdistance_DEPENDENCIES) $(EXTRA_fstshortestdistance_DEPENDENCIES) 
 	@rm -f fstshortestdistance$(EXEEXT)
 	$(CXXLINK) $(fstshortestdistance_OBJECTS) $(fstshortestdistance_LDADD) $(LIBS)
-fstshortestpath$(EXEEXT): $(fstshortestpath_OBJECTS) $(fstshortestpath_DEPENDENCIES) 
+fstshortestpath$(EXEEXT): $(fstshortestpath_OBJECTS) $(fstshortestpath_DEPENDENCIES) $(EXTRA_fstshortestpath_DEPENDENCIES) 
 	@rm -f fstshortestpath$(EXEEXT)
 	$(CXXLINK) $(fstshortestpath_OBJECTS) $(fstshortestpath_LDADD) $(LIBS)
-fstsymbols$(EXEEXT): $(fstsymbols_OBJECTS) $(fstsymbols_DEPENDENCIES) 
+fstsymbols$(EXEEXT): $(fstsymbols_OBJECTS) $(fstsymbols_DEPENDENCIES) $(EXTRA_fstsymbols_DEPENDENCIES) 
 	@rm -f fstsymbols$(EXEEXT)
 	$(CXXLINK) $(fstsymbols_OBJECTS) $(fstsymbols_LDADD) $(LIBS)
-fstsynchronize$(EXEEXT): $(fstsynchronize_OBJECTS) $(fstsynchronize_DEPENDENCIES) 
+fstsynchronize$(EXEEXT): $(fstsynchronize_OBJECTS) $(fstsynchronize_DEPENDENCIES) $(EXTRA_fstsynchronize_DEPENDENCIES) 
 	@rm -f fstsynchronize$(EXEEXT)
 	$(CXXLINK) $(fstsynchronize_OBJECTS) $(fstsynchronize_LDADD) $(LIBS)
-fsttopsort$(EXEEXT): $(fsttopsort_OBJECTS) $(fsttopsort_DEPENDENCIES) 
+fsttopsort$(EXEEXT): $(fsttopsort_OBJECTS) $(fsttopsort_DEPENDENCIES) $(EXTRA_fsttopsort_DEPENDENCIES) 
 	@rm -f fsttopsort$(EXEEXT)
 	$(CXXLINK) $(fsttopsort_OBJECTS) $(fsttopsort_LDADD) $(LIBS)
-fstunion$(EXEEXT): $(fstunion_OBJECTS) $(fstunion_DEPENDENCIES) 
+fstunion$(EXEEXT): $(fstunion_OBJECTS) $(fstunion_DEPENDENCIES) $(EXTRA_fstunion_DEPENDENCIES) 
 	@rm -f fstunion$(EXEEXT)
 	$(CXXLINK) $(fstunion_OBJECTS) $(fstunion_LDADD) $(LIBS)
 
@@ -816,10 +815,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/extensions/Makefile.in b/src/extensions/Makefile.in
index 6bcf056..d2d57f5 100644
--- a/src/extensions/Makefile.in
+++ b/src/extensions/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -36,10 +36,10 @@
 subdir = src/extensions
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -109,6 +109,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -118,11 +119,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -137,6 +133,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -162,6 +159,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -196,7 +194,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -467,10 +464,15 @@
 
 installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/extensions/compact/Makefile.am b/src/extensions/compact/Makefile.am
index b80cd3e..20691cf 100644
--- a/src/extensions/compact/Makefile.am
+++ b/src/extensions/compact/Makefile.am
@@ -4,7 +4,7 @@
 libfst_LTLIBRARIES = libfstcompact.la compact8_acceptor-fst.la compact8_string-fst.la compact8_unweighted-fst.la compact8_unweighted_acceptor-fst.la compact8_weighted_string-fst.la compact16_acceptor-fst.la compact16_string-fst.la compact16_unweighted-fst.la compact16_unweighted_acceptor-fst.la compact16_weighted_string-fst.la compact64_acceptor-fst.la compact64_string-fst.la compact64_unweighted-fst.la compact64_unweighted_acceptor-fst.la compact64_weighted_string-fst.la
 
 libfstcompact_la_SOURCES = compact8_acceptor-fst.cc compact8_string-fst.cc compact8_unweighted-fst.cc compact8_unweighted_acceptor-fst.cc compact8_weighted_string-fst.cc compact16_acceptor-fst.cc compact16_string-fst.cc compact16_unweighted-fst.cc compact16_unweighted_acceptor-fst.cc compact16_weighted_string-fst.cc compact64_acceptor-fst.cc compact64_string-fst.cc compact64_unweighted-fst.cc compact64_unweighted_acceptor-fst.cc compact64_weighted_string-fst.cc
-libfstcompact_la_LDFLAGS = -version-info 0:0:0
+libfstcompact_la_LDFLAGS = -version-info 1:0:0
 
 compact8_acceptor_fst_la_SOURCES = compact8_acceptor-fst.cc
 compact8_acceptor_fst_la_LDFLAGS = -module
diff --git a/src/extensions/compact/Makefile.in b/src/extensions/compact/Makefile.in
index fe31e46..82f971c 100644
--- a/src/extensions/compact/Makefile.in
+++ b/src/extensions/compact/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -37,10 +37,10 @@
 subdir = src/extensions/compact
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -69,6 +69,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(libfstdir)"
 LTLIBRARIES = $(libfst_LTLIBRARIES)
 compact16_acceptor_fst_la_LIBADD =
@@ -280,6 +286,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -289,11 +296,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -308,6 +310,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -333,6 +336,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -367,7 +371,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -386,7 +389,7 @@
 AM_CPPFLAGS = -I$(srcdir)/../../include $(ICU_CPPFLAGS)
 libfst_LTLIBRARIES = libfstcompact.la compact8_acceptor-fst.la compact8_string-fst.la compact8_unweighted-fst.la compact8_unweighted_acceptor-fst.la compact8_weighted_string-fst.la compact16_acceptor-fst.la compact16_string-fst.la compact16_unweighted-fst.la compact16_unweighted_acceptor-fst.la compact16_weighted_string-fst.la compact64_acceptor-fst.la compact64_string-fst.la compact64_unweighted-fst.la compact64_unweighted_acceptor-fst.la compact64_weighted_string-fst.la
 libfstcompact_la_SOURCES = compact8_acceptor-fst.cc compact8_string-fst.cc compact8_unweighted-fst.cc compact8_unweighted_acceptor-fst.cc compact8_weighted_string-fst.cc compact16_acceptor-fst.cc compact16_string-fst.cc compact16_unweighted-fst.cc compact16_unweighted_acceptor-fst.cc compact16_weighted_string-fst.cc compact64_acceptor-fst.cc compact64_string-fst.cc compact64_unweighted-fst.cc compact64_unweighted_acceptor-fst.cc compact64_weighted_string-fst.cc
-libfstcompact_la_LDFLAGS = -version-info 0:0:0
+libfstcompact_la_LDFLAGS = -version-info 1:0:0
 compact8_acceptor_fst_la_SOURCES = compact8_acceptor-fst.cc
 compact8_acceptor_fst_la_LDFLAGS = -module
 compact8_string_fst_la_SOURCES = compact8_string-fst.cc
@@ -482,37 +485,37 @@
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
-compact16_acceptor-fst.la: $(compact16_acceptor_fst_la_OBJECTS) $(compact16_acceptor_fst_la_DEPENDENCIES) 
+compact16_acceptor-fst.la: $(compact16_acceptor_fst_la_OBJECTS) $(compact16_acceptor_fst_la_DEPENDENCIES) $(EXTRA_compact16_acceptor_fst_la_DEPENDENCIES) 
 	$(compact16_acceptor_fst_la_LINK) -rpath $(libfstdir) $(compact16_acceptor_fst_la_OBJECTS) $(compact16_acceptor_fst_la_LIBADD) $(LIBS)
-compact16_string-fst.la: $(compact16_string_fst_la_OBJECTS) $(compact16_string_fst_la_DEPENDENCIES) 
+compact16_string-fst.la: $(compact16_string_fst_la_OBJECTS) $(compact16_string_fst_la_DEPENDENCIES) $(EXTRA_compact16_string_fst_la_DEPENDENCIES) 
 	$(compact16_string_fst_la_LINK) -rpath $(libfstdir) $(compact16_string_fst_la_OBJECTS) $(compact16_string_fst_la_LIBADD) $(LIBS)
-compact16_unweighted-fst.la: $(compact16_unweighted_fst_la_OBJECTS) $(compact16_unweighted_fst_la_DEPENDENCIES) 
+compact16_unweighted-fst.la: $(compact16_unweighted_fst_la_OBJECTS) $(compact16_unweighted_fst_la_DEPENDENCIES) $(EXTRA_compact16_unweighted_fst_la_DEPENDENCIES) 
 	$(compact16_unweighted_fst_la_LINK) -rpath $(libfstdir) $(compact16_unweighted_fst_la_OBJECTS) $(compact16_unweighted_fst_la_LIBADD) $(LIBS)
-compact16_unweighted_acceptor-fst.la: $(compact16_unweighted_acceptor_fst_la_OBJECTS) $(compact16_unweighted_acceptor_fst_la_DEPENDENCIES) 
+compact16_unweighted_acceptor-fst.la: $(compact16_unweighted_acceptor_fst_la_OBJECTS) $(compact16_unweighted_acceptor_fst_la_DEPENDENCIES) $(EXTRA_compact16_unweighted_acceptor_fst_la_DEPENDENCIES) 
 	$(compact16_unweighted_acceptor_fst_la_LINK) -rpath $(libfstdir) $(compact16_unweighted_acceptor_fst_la_OBJECTS) $(compact16_unweighted_acceptor_fst_la_LIBADD) $(LIBS)
-compact16_weighted_string-fst.la: $(compact16_weighted_string_fst_la_OBJECTS) $(compact16_weighted_string_fst_la_DEPENDENCIES) 
+compact16_weighted_string-fst.la: $(compact16_weighted_string_fst_la_OBJECTS) $(compact16_weighted_string_fst_la_DEPENDENCIES) $(EXTRA_compact16_weighted_string_fst_la_DEPENDENCIES) 
 	$(compact16_weighted_string_fst_la_LINK) -rpath $(libfstdir) $(compact16_weighted_string_fst_la_OBJECTS) $(compact16_weighted_string_fst_la_LIBADD) $(LIBS)
-compact64_acceptor-fst.la: $(compact64_acceptor_fst_la_OBJECTS) $(compact64_acceptor_fst_la_DEPENDENCIES) 
+compact64_acceptor-fst.la: $(compact64_acceptor_fst_la_OBJECTS) $(compact64_acceptor_fst_la_DEPENDENCIES) $(EXTRA_compact64_acceptor_fst_la_DEPENDENCIES) 
 	$(compact64_acceptor_fst_la_LINK) -rpath $(libfstdir) $(compact64_acceptor_fst_la_OBJECTS) $(compact64_acceptor_fst_la_LIBADD) $(LIBS)
-compact64_string-fst.la: $(compact64_string_fst_la_OBJECTS) $(compact64_string_fst_la_DEPENDENCIES) 
+compact64_string-fst.la: $(compact64_string_fst_la_OBJECTS) $(compact64_string_fst_la_DEPENDENCIES) $(EXTRA_compact64_string_fst_la_DEPENDENCIES) 
 	$(compact64_string_fst_la_LINK) -rpath $(libfstdir) $(compact64_string_fst_la_OBJECTS) $(compact64_string_fst_la_LIBADD) $(LIBS)
-compact64_unweighted-fst.la: $(compact64_unweighted_fst_la_OBJECTS) $(compact64_unweighted_fst_la_DEPENDENCIES) 
+compact64_unweighted-fst.la: $(compact64_unweighted_fst_la_OBJECTS) $(compact64_unweighted_fst_la_DEPENDENCIES) $(EXTRA_compact64_unweighted_fst_la_DEPENDENCIES) 
 	$(compact64_unweighted_fst_la_LINK) -rpath $(libfstdir) $(compact64_unweighted_fst_la_OBJECTS) $(compact64_unweighted_fst_la_LIBADD) $(LIBS)
-compact64_unweighted_acceptor-fst.la: $(compact64_unweighted_acceptor_fst_la_OBJECTS) $(compact64_unweighted_acceptor_fst_la_DEPENDENCIES) 
+compact64_unweighted_acceptor-fst.la: $(compact64_unweighted_acceptor_fst_la_OBJECTS) $(compact64_unweighted_acceptor_fst_la_DEPENDENCIES) $(EXTRA_compact64_unweighted_acceptor_fst_la_DEPENDENCIES) 
 	$(compact64_unweighted_acceptor_fst_la_LINK) -rpath $(libfstdir) $(compact64_unweighted_acceptor_fst_la_OBJECTS) $(compact64_unweighted_acceptor_fst_la_LIBADD) $(LIBS)
-compact64_weighted_string-fst.la: $(compact64_weighted_string_fst_la_OBJECTS) $(compact64_weighted_string_fst_la_DEPENDENCIES) 
+compact64_weighted_string-fst.la: $(compact64_weighted_string_fst_la_OBJECTS) $(compact64_weighted_string_fst_la_DEPENDENCIES) $(EXTRA_compact64_weighted_string_fst_la_DEPENDENCIES) 
 	$(compact64_weighted_string_fst_la_LINK) -rpath $(libfstdir) $(compact64_weighted_string_fst_la_OBJECTS) $(compact64_weighted_string_fst_la_LIBADD) $(LIBS)
-compact8_acceptor-fst.la: $(compact8_acceptor_fst_la_OBJECTS) $(compact8_acceptor_fst_la_DEPENDENCIES) 
+compact8_acceptor-fst.la: $(compact8_acceptor_fst_la_OBJECTS) $(compact8_acceptor_fst_la_DEPENDENCIES) $(EXTRA_compact8_acceptor_fst_la_DEPENDENCIES) 
 	$(compact8_acceptor_fst_la_LINK) -rpath $(libfstdir) $(compact8_acceptor_fst_la_OBJECTS) $(compact8_acceptor_fst_la_LIBADD) $(LIBS)
-compact8_string-fst.la: $(compact8_string_fst_la_OBJECTS) $(compact8_string_fst_la_DEPENDENCIES) 
+compact8_string-fst.la: $(compact8_string_fst_la_OBJECTS) $(compact8_string_fst_la_DEPENDENCIES) $(EXTRA_compact8_string_fst_la_DEPENDENCIES) 
 	$(compact8_string_fst_la_LINK) -rpath $(libfstdir) $(compact8_string_fst_la_OBJECTS) $(compact8_string_fst_la_LIBADD) $(LIBS)
-compact8_unweighted-fst.la: $(compact8_unweighted_fst_la_OBJECTS) $(compact8_unweighted_fst_la_DEPENDENCIES) 
+compact8_unweighted-fst.la: $(compact8_unweighted_fst_la_OBJECTS) $(compact8_unweighted_fst_la_DEPENDENCIES) $(EXTRA_compact8_unweighted_fst_la_DEPENDENCIES) 
 	$(compact8_unweighted_fst_la_LINK) -rpath $(libfstdir) $(compact8_unweighted_fst_la_OBJECTS) $(compact8_unweighted_fst_la_LIBADD) $(LIBS)
-compact8_unweighted_acceptor-fst.la: $(compact8_unweighted_acceptor_fst_la_OBJECTS) $(compact8_unweighted_acceptor_fst_la_DEPENDENCIES) 
+compact8_unweighted_acceptor-fst.la: $(compact8_unweighted_acceptor_fst_la_OBJECTS) $(compact8_unweighted_acceptor_fst_la_DEPENDENCIES) $(EXTRA_compact8_unweighted_acceptor_fst_la_DEPENDENCIES) 
 	$(compact8_unweighted_acceptor_fst_la_LINK) -rpath $(libfstdir) $(compact8_unweighted_acceptor_fst_la_OBJECTS) $(compact8_unweighted_acceptor_fst_la_LIBADD) $(LIBS)
-compact8_weighted_string-fst.la: $(compact8_weighted_string_fst_la_OBJECTS) $(compact8_weighted_string_fst_la_DEPENDENCIES) 
+compact8_weighted_string-fst.la: $(compact8_weighted_string_fst_la_OBJECTS) $(compact8_weighted_string_fst_la_DEPENDENCIES) $(EXTRA_compact8_weighted_string_fst_la_DEPENDENCIES) 
 	$(compact8_weighted_string_fst_la_LINK) -rpath $(libfstdir) $(compact8_weighted_string_fst_la_OBJECTS) $(compact8_weighted_string_fst_la_LIBADD) $(LIBS)
-libfstcompact.la: $(libfstcompact_la_OBJECTS) $(libfstcompact_la_DEPENDENCIES) 
+libfstcompact.la: $(libfstcompact_la_OBJECTS) $(libfstcompact_la_DEPENDENCIES) $(EXTRA_libfstcompact_la_DEPENDENCIES) 
 	$(libfstcompact_la_LINK) -rpath $(libfstdir) $(libfstcompact_la_OBJECTS) $(libfstcompact_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
@@ -663,10 +666,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/extensions/const/Makefile.am b/src/extensions/const/Makefile.am
index 08a97d5..5ef89c6 100644
--- a/src/extensions/const/Makefile.am
+++ b/src/extensions/const/Makefile.am
@@ -4,7 +4,7 @@
 libfst_LTLIBRARIES = libfstconst.la const8-fst.la const16-fst.la const64-fst.la
 
 libfstconst_la_SOURCES = const8-fst.cc const16-fst.cc const64-fst.cc
-libfstconst_la_LDFLAGS = -version-info 0:0:0
+libfstconst_la_LDFLAGS = -version-info 1:0:0
 
 const8_fst_la_SOURCES = const8-fst.cc
 const8_fst_la_LDFLAGS = -module
diff --git a/src/extensions/const/Makefile.in b/src/extensions/const/Makefile.in
index 906750a..67f2d5b 100644
--- a/src/extensions/const/Makefile.in
+++ b/src/extensions/const/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -37,10 +37,10 @@
 subdir = src/extensions/const
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -69,6 +69,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(libfstdir)"
 LTLIBRARIES = $(libfst_LTLIBRARIES)
 const16_fst_la_LIBADD =
@@ -135,6 +141,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -144,11 +151,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -163,6 +165,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -188,6 +191,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -222,7 +226,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -241,7 +244,7 @@
 AM_CPPFLAGS = -I$(srcdir)/../../include $(ICU_CPPFLAGS)
 libfst_LTLIBRARIES = libfstconst.la const8-fst.la const16-fst.la const64-fst.la
 libfstconst_la_SOURCES = const8-fst.cc const16-fst.cc const64-fst.cc
-libfstconst_la_LDFLAGS = -version-info 0:0:0
+libfstconst_la_LDFLAGS = -version-info 1:0:0
 const8_fst_la_SOURCES = const8-fst.cc
 const8_fst_la_LDFLAGS = -module
 const16_fst_la_SOURCES = const16-fst.cc
@@ -313,13 +316,13 @@
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
-const16-fst.la: $(const16_fst_la_OBJECTS) $(const16_fst_la_DEPENDENCIES) 
+const16-fst.la: $(const16_fst_la_OBJECTS) $(const16_fst_la_DEPENDENCIES) $(EXTRA_const16_fst_la_DEPENDENCIES) 
 	$(const16_fst_la_LINK) -rpath $(libfstdir) $(const16_fst_la_OBJECTS) $(const16_fst_la_LIBADD) $(LIBS)
-const64-fst.la: $(const64_fst_la_OBJECTS) $(const64_fst_la_DEPENDENCIES) 
+const64-fst.la: $(const64_fst_la_OBJECTS) $(const64_fst_la_DEPENDENCIES) $(EXTRA_const64_fst_la_DEPENDENCIES) 
 	$(const64_fst_la_LINK) -rpath $(libfstdir) $(const64_fst_la_OBJECTS) $(const64_fst_la_LIBADD) $(LIBS)
-const8-fst.la: $(const8_fst_la_OBJECTS) $(const8_fst_la_DEPENDENCIES) 
+const8-fst.la: $(const8_fst_la_OBJECTS) $(const8_fst_la_DEPENDENCIES) $(EXTRA_const8_fst_la_DEPENDENCIES) 
 	$(const8_fst_la_LINK) -rpath $(libfstdir) $(const8_fst_la_OBJECTS) $(const8_fst_la_LIBADD) $(LIBS)
-libfstconst.la: $(libfstconst_la_OBJECTS) $(libfstconst_la_DEPENDENCIES) 
+libfstconst.la: $(libfstconst_la_OBJECTS) $(libfstconst_la_DEPENDENCIES) $(EXTRA_libfstconst_la_DEPENDENCIES) 
 	$(libfstconst_la_LINK) -rpath $(libfstdir) $(libfstconst_la_OBJECTS) $(libfstconst_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
@@ -458,10 +461,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/extensions/far/Makefile.am b/src/extensions/far/Makefile.am
index a7c2fff..1f063e3 100644
--- a/src/extensions/far/Makefile.am
+++ b/src/extensions/far/Makefile.am
@@ -9,11 +9,11 @@
 endif
 
 libfstfar_la_SOURCES = sttable.cc stlist.cc
-libfstfar_la_LDFLAGS = -version-info 0:0:0
+libfstfar_la_LDFLAGS = -version-info 1:0:0
 
 if HAVE_SCRIPT
 libfstfarscript_la_SOURCES = farscript.cc strings.cc main.cc
-libfstfarscript_la_LDFLAGS = -version-info 0:0:0
+libfstfarscript_la_LDFLAGS = -version-info 1:0:0
 endif
 
 if HAVE_BIN
diff --git a/src/extensions/far/Makefile.in b/src/extensions/far/Makefile.in
index 0635556..bbb6989 100644
--- a/src/extensions/far/Makefile.in
+++ b/src/extensions/far/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -42,10 +42,10 @@
 subdir = src/extensions/far
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -74,6 +74,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(libfstdir)" "$(DESTDIR)$(bindir)"
 LTLIBRARIES = $(libfst_LTLIBRARIES)
 libfstfar_la_LIBADD =
@@ -182,6 +188,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -191,11 +198,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -210,6 +212,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -235,6 +238,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -269,7 +273,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -289,9 +292,9 @@
 @HAVE_SCRIPT_FALSE@libfst_LTLIBRARIES = libfstfar.la
 @HAVE_SCRIPT_TRUE@libfst_LTLIBRARIES = libfstfarscript.la libfstfar.la
 libfstfar_la_SOURCES = sttable.cc stlist.cc
-libfstfar_la_LDFLAGS = -version-info 0:0:0
+libfstfar_la_LDFLAGS = -version-info 1:0:0
 @HAVE_SCRIPT_TRUE@libfstfarscript_la_SOURCES = farscript.cc strings.cc main.cc
-@HAVE_SCRIPT_TRUE@libfstfarscript_la_LDFLAGS = -version-info 0:0:0
+@HAVE_SCRIPT_TRUE@libfstfarscript_la_LDFLAGS = -version-info 1:0:0
 @HAVE_BIN_TRUE@LDADD = libfstfarscript.la libfstfar.la ../../script/libfstscript.la \
 @HAVE_BIN_TRUE@        ../../lib/libfst.la -lm -ldl
 
@@ -366,9 +369,9 @@
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
-libfstfar.la: $(libfstfar_la_OBJECTS) $(libfstfar_la_DEPENDENCIES) 
+libfstfar.la: $(libfstfar_la_OBJECTS) $(libfstfar_la_DEPENDENCIES) $(EXTRA_libfstfar_la_DEPENDENCIES) 
 	$(libfstfar_la_LINK) $(am_libfstfar_la_rpath) $(libfstfar_la_OBJECTS) $(libfstfar_la_LIBADD) $(LIBS)
-libfstfarscript.la: $(libfstfarscript_la_OBJECTS) $(libfstfarscript_la_DEPENDENCIES) 
+libfstfarscript.la: $(libfstfarscript_la_OBJECTS) $(libfstfarscript_la_DEPENDENCIES) $(EXTRA_libfstfarscript_la_DEPENDENCIES) 
 	$(libfstfarscript_la_LINK) $(am_libfstfarscript_la_rpath) $(libfstfarscript_la_OBJECTS) $(libfstfarscript_la_LIBADD) $(LIBS)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
@@ -413,22 +416,22 @@
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
-farcompilestrings$(EXEEXT): $(farcompilestrings_OBJECTS) $(farcompilestrings_DEPENDENCIES) 
+farcompilestrings$(EXEEXT): $(farcompilestrings_OBJECTS) $(farcompilestrings_DEPENDENCIES) $(EXTRA_farcompilestrings_DEPENDENCIES) 
 	@rm -f farcompilestrings$(EXEEXT)
 	$(CXXLINK) $(farcompilestrings_OBJECTS) $(farcompilestrings_LDADD) $(LIBS)
-farcreate$(EXEEXT): $(farcreate_OBJECTS) $(farcreate_DEPENDENCIES) 
+farcreate$(EXEEXT): $(farcreate_OBJECTS) $(farcreate_DEPENDENCIES) $(EXTRA_farcreate_DEPENDENCIES) 
 	@rm -f farcreate$(EXEEXT)
 	$(CXXLINK) $(farcreate_OBJECTS) $(farcreate_LDADD) $(LIBS)
-farequal$(EXEEXT): $(farequal_OBJECTS) $(farequal_DEPENDENCIES) 
+farequal$(EXEEXT): $(farequal_OBJECTS) $(farequal_DEPENDENCIES) $(EXTRA_farequal_DEPENDENCIES) 
 	@rm -f farequal$(EXEEXT)
 	$(CXXLINK) $(farequal_OBJECTS) $(farequal_LDADD) $(LIBS)
-farextract$(EXEEXT): $(farextract_OBJECTS) $(farextract_DEPENDENCIES) 
+farextract$(EXEEXT): $(farextract_OBJECTS) $(farextract_DEPENDENCIES) $(EXTRA_farextract_DEPENDENCIES) 
 	@rm -f farextract$(EXEEXT)
 	$(CXXLINK) $(farextract_OBJECTS) $(farextract_LDADD) $(LIBS)
-farinfo$(EXEEXT): $(farinfo_OBJECTS) $(farinfo_DEPENDENCIES) 
+farinfo$(EXEEXT): $(farinfo_OBJECTS) $(farinfo_DEPENDENCIES) $(EXTRA_farinfo_DEPENDENCIES) 
 	@rm -f farinfo$(EXEEXT)
 	$(CXXLINK) $(farinfo_OBJECTS) $(farinfo_LDADD) $(LIBS)
-farprintstrings$(EXEEXT): $(farprintstrings_OBJECTS) $(farprintstrings_DEPENDENCIES) 
+farprintstrings$(EXEEXT): $(farprintstrings_OBJECTS) $(farprintstrings_DEPENDENCIES) $(EXTRA_farprintstrings_DEPENDENCIES) 
 	@rm -f farprintstrings$(EXEEXT)
 	$(CXXLINK) $(farprintstrings_OBJECTS) $(farprintstrings_LDADD) $(LIBS)
 
@@ -576,10 +579,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/extensions/far/farcompilestrings.cc b/src/extensions/far/farcompilestrings.cc
index 765b908..c611ae9 100644
--- a/src/extensions/far/farcompilestrings.cc
+++ b/src/extensions/far/farcompilestrings.cc
@@ -32,7 +32,7 @@
 DEFINE_int32(generate_keys, 0,
              "Generate N digit numeric keys (def: use file basenames)");
 DEFINE_string(far_type, "default",
-              "FAR file format type: one of: \"default\", \"fst\""
+              "FAR file format type: one of: \"default\", \"fst\", "
               "\"stlist\", \"sttable\"");
 DEFINE_bool(allow_negative_labels, false,
             "Allow negative labels (not recommended; may cause conflicts)");
diff --git a/src/extensions/far/farequal.cc b/src/extensions/far/farequal.cc
index 94e607c..a32cccb 100644
--- a/src/extensions/far/farequal.cc
+++ b/src/extensions/far/farequal.cc
@@ -30,8 +30,8 @@
 int main(int argc, char **argv) {
   namespace s = fst::script;
 
-  string usage = "Prints some basic information about the FSTs in an FST ";
-  usage += "archive.\n\n Usage:";
+  string usage = "Compares the FSTs in two FST archives for equality.";
+  usage += "\n\n Usage:";
   usage += argv[0];
   usage += " in1.far in2.far\n";
   usage += "  Flags: begin_key end_key";
diff --git a/src/extensions/far/farextract.cc b/src/extensions/far/farextract.cc
index 66b7840..e701e8a 100644
--- a/src/extensions/far/farextract.cc
+++ b/src/extensions/far/farextract.cc
@@ -27,11 +27,11 @@
 DEFINE_string(filename_suffix, "", "Suffix to append to filenames");
 DEFINE_int32(generate_filenames, 0,
              "Generate N digit numeric filenames (def: use keys)");
-DEFINE_string(begin_key, "",
-              "First key to extract (def: first key in archive)");
-DEFINE_string(end_key, "",
-              "Last key to extract (def: last key in archive)");
-
+DEFINE_string(keys, "",
+              "Extract set of keys separated by comma (default) "
+              "including ranges delimited by dash (default)" );
+DEFINE_string(key_separator, ",", "Separator for individual keys");
+DEFINE_string(range_delimiter, "-", "Delimiter for ranges of keys");
 
 int main(int argc, char **argv) {
   namespace s = fst::script;
@@ -51,8 +51,8 @@
   const string &arc_type = fst::LoadArcTypeFromFar(ifilenames[0]);
 
   s::FarExtract(ifilenames, arc_type, FLAGS_generate_filenames,
-                FLAGS_begin_key, FLAGS_end_key, FLAGS_filename_prefix,
-                FLAGS_filename_suffix);
+                FLAGS_keys, FLAGS_key_separator, FLAGS_range_delimiter,
+                FLAGS_filename_prefix, FLAGS_filename_suffix);
 
   return 0;
 }
diff --git a/src/extensions/far/farscript.cc b/src/extensions/far/farscript.cc
index bc4ad0e..76da273 100644
--- a/src/extensions/far/farscript.cc
+++ b/src/extensions/far/farscript.cc
@@ -76,10 +76,14 @@
 
 void FarExtract(const vector<string> &ifilenames,
                 const string &arc_type,
-                int32 generate_filenames, const string &begin_key,
-                const string &end_key, const string &filename_prefix,
+                int32 generate_filenames,
+                const string &keys,
+                const string &key_separator,
+                const string &range_delimiter,
+                const string &filename_prefix,
                 const string &filename_suffix) {
-  FarExtractArgs args(ifilenames, generate_filenames, begin_key, end_key,
+  FarExtractArgs args(ifilenames, generate_filenames, keys,
+                      key_separator, range_delimiter,
                       filename_prefix, filename_suffix);
 
   Apply<Operation<FarExtractArgs> >("FarExtract", arc_type, &args);
diff --git a/src/extensions/lookahead/Makefile.in b/src/extensions/lookahead/Makefile.in
index 4cb078f..0bddaf0 100644
--- a/src/extensions/lookahead/Makefile.in
+++ b/src/extensions/lookahead/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -37,10 +37,10 @@
 subdir = src/extensions/lookahead
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -69,6 +69,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(libfstdir)"
 LTLIBRARIES = $(libfst_LTLIBRARIES)
 arc_lookahead_fst_la_LIBADD =
@@ -143,6 +149,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -152,11 +159,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -171,6 +173,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -196,6 +199,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -230,7 +234,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -325,13 +328,13 @@
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
-arc_lookahead-fst.la: $(arc_lookahead_fst_la_OBJECTS) $(arc_lookahead_fst_la_DEPENDENCIES) 
+arc_lookahead-fst.la: $(arc_lookahead_fst_la_OBJECTS) $(arc_lookahead_fst_la_DEPENDENCIES) $(EXTRA_arc_lookahead_fst_la_DEPENDENCIES) 
 	$(arc_lookahead_fst_la_LINK) -rpath $(libfstdir) $(arc_lookahead_fst_la_OBJECTS) $(arc_lookahead_fst_la_LIBADD) $(LIBS)
-ilabel_lookahead-fst.la: $(ilabel_lookahead_fst_la_OBJECTS) $(ilabel_lookahead_fst_la_DEPENDENCIES) 
+ilabel_lookahead-fst.la: $(ilabel_lookahead_fst_la_OBJECTS) $(ilabel_lookahead_fst_la_DEPENDENCIES) $(EXTRA_ilabel_lookahead_fst_la_DEPENDENCIES) 
 	$(ilabel_lookahead_fst_la_LINK) -rpath $(libfstdir) $(ilabel_lookahead_fst_la_OBJECTS) $(ilabel_lookahead_fst_la_LIBADD) $(LIBS)
-libfstlookahead.la: $(libfstlookahead_la_OBJECTS) $(libfstlookahead_la_DEPENDENCIES) 
+libfstlookahead.la: $(libfstlookahead_la_OBJECTS) $(libfstlookahead_la_DEPENDENCIES) $(EXTRA_libfstlookahead_la_DEPENDENCIES) 
 	$(libfstlookahead_la_LINK) -rpath $(libfstdir) $(libfstlookahead_la_OBJECTS) $(libfstlookahead_la_LIBADD) $(LIBS)
-olabel_lookahead-fst.la: $(olabel_lookahead_fst_la_OBJECTS) $(olabel_lookahead_fst_la_DEPENDENCIES) 
+olabel_lookahead-fst.la: $(olabel_lookahead_fst_la_OBJECTS) $(olabel_lookahead_fst_la_DEPENDENCIES) $(EXTRA_olabel_lookahead_fst_la_DEPENDENCIES) 
 	$(olabel_lookahead_fst_la_LINK) -rpath $(libfstdir) $(olabel_lookahead_fst_la_OBJECTS) $(olabel_lookahead_fst_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
@@ -470,10 +473,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/extensions/ngram/Makefile.am b/src/extensions/ngram/Makefile.am
index e909eaf..037a304 100644
--- a/src/extensions/ngram/Makefile.am
+++ b/src/extensions/ngram/Makefile.am
@@ -7,4 +7,4 @@
 ngram_fst_la_LDFLAGS = -module
 
 libfstngram_la_SOURCES = bitmap-index.cc ngram-fst.cc nthbit.cc
-libfstngram_la_LDFLAGS = -version-info 0:0:0
+libfstngram_la_LDFLAGS = -version-info 1:0:0
diff --git a/src/extensions/ngram/Makefile.in b/src/extensions/ngram/Makefile.in
index cce1255..5df1b1a 100644
--- a/src/extensions/ngram/Makefile.in
+++ b/src/extensions/ngram/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -37,10 +37,10 @@
 subdir = src/extensions/ngram
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -69,6 +69,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(libfstdir)"
 LTLIBRARIES = $(libfst_LTLIBRARIES)
 libfstngram_la_LIBADD =
@@ -120,6 +126,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -129,11 +136,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -148,6 +150,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -173,6 +176,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -207,7 +211,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -228,7 +231,7 @@
 ngram_fst_la_SOURCES = bitmap-index.cc ngram-fst.cc nthbit.cc
 ngram_fst_la_LDFLAGS = -module
 libfstngram_la_SOURCES = bitmap-index.cc ngram-fst.cc nthbit.cc
-libfstngram_la_LDFLAGS = -version-info 0:0:0
+libfstngram_la_LDFLAGS = -version-info 1:0:0
 all: all-am
 
 .SUFFIXES:
@@ -294,9 +297,9 @@
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
-libfstngram.la: $(libfstngram_la_OBJECTS) $(libfstngram_la_DEPENDENCIES) 
+libfstngram.la: $(libfstngram_la_OBJECTS) $(libfstngram_la_DEPENDENCIES) $(EXTRA_libfstngram_la_DEPENDENCIES) 
 	$(libfstngram_la_LINK) -rpath $(libfstdir) $(libfstngram_la_OBJECTS) $(libfstngram_la_LIBADD) $(LIBS)
-ngram-fst.la: $(ngram_fst_la_OBJECTS) $(ngram_fst_la_DEPENDENCIES) 
+ngram-fst.la: $(ngram_fst_la_OBJECTS) $(ngram_fst_la_DEPENDENCIES) $(EXTRA_ngram_fst_la_DEPENDENCIES) 
 	$(ngram_fst_la_LINK) -rpath $(libfstdir) $(ngram_fst_la_OBJECTS) $(ngram_fst_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
@@ -435,10 +438,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/extensions/pdt/Makefile.am b/src/extensions/pdt/Makefile.am
index 9936b52..8747c10 100644
--- a/src/extensions/pdt/Makefile.am
+++ b/src/extensions/pdt/Makefile.am
@@ -25,5 +25,5 @@
 if HAVE_SCRIPT
 libfst_LTLIBRARIES = libfstpdtscript.la
 libfstpdtscript_la_SOURCES = pdtscript.cc
-libfstpdtscript_la_LDFLAGS = -version-info 0:0:0
+libfstpdtscript_la_LDFLAGS = -version-info 1:0:0
 endif
diff --git a/src/extensions/pdt/Makefile.in b/src/extensions/pdt/Makefile.in
index 018f344..253763a 100644
--- a/src/extensions/pdt/Makefile.in
+++ b/src/extensions/pdt/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -41,10 +41,10 @@
 subdir = src/extensions/pdt
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -73,6 +73,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(libfstdir)" "$(DESTDIR)$(bindir)"
 LTLIBRARIES = $(libfst_LTLIBRARIES)
 libfstpdtscript_la_LIBADD =
@@ -169,6 +175,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -178,11 +185,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -197,6 +199,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -222,6 +225,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -256,7 +260,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -284,7 +287,7 @@
 @HAVE_BIN_TRUE@pdtshortestpath_SOURCES = pdtshortestpath.cc 
 @HAVE_SCRIPT_TRUE@libfst_LTLIBRARIES = libfstpdtscript.la
 @HAVE_SCRIPT_TRUE@libfstpdtscript_la_SOURCES = pdtscript.cc
-@HAVE_SCRIPT_TRUE@libfstpdtscript_la_LDFLAGS = -version-info 0:0:0
+@HAVE_SCRIPT_TRUE@libfstpdtscript_la_LDFLAGS = -version-info 1:0:0
 all: all-am
 
 .SUFFIXES:
@@ -350,7 +353,7 @@
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
-libfstpdtscript.la: $(libfstpdtscript_la_OBJECTS) $(libfstpdtscript_la_DEPENDENCIES) 
+libfstpdtscript.la: $(libfstpdtscript_la_OBJECTS) $(libfstpdtscript_la_DEPENDENCIES) $(EXTRA_libfstpdtscript_la_DEPENDENCIES) 
 	$(libfstpdtscript_la_LINK) $(am_libfstpdtscript_la_rpath) $(libfstpdtscript_la_OBJECTS) $(libfstpdtscript_la_LIBADD) $(LIBS)
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
@@ -395,22 +398,22 @@
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
-pdtcompose$(EXEEXT): $(pdtcompose_OBJECTS) $(pdtcompose_DEPENDENCIES) 
+pdtcompose$(EXEEXT): $(pdtcompose_OBJECTS) $(pdtcompose_DEPENDENCIES) $(EXTRA_pdtcompose_DEPENDENCIES) 
 	@rm -f pdtcompose$(EXEEXT)
 	$(CXXLINK) $(pdtcompose_OBJECTS) $(pdtcompose_LDADD) $(LIBS)
-pdtexpand$(EXEEXT): $(pdtexpand_OBJECTS) $(pdtexpand_DEPENDENCIES) 
+pdtexpand$(EXEEXT): $(pdtexpand_OBJECTS) $(pdtexpand_DEPENDENCIES) $(EXTRA_pdtexpand_DEPENDENCIES) 
 	@rm -f pdtexpand$(EXEEXT)
 	$(CXXLINK) $(pdtexpand_OBJECTS) $(pdtexpand_LDADD) $(LIBS)
-pdtinfo$(EXEEXT): $(pdtinfo_OBJECTS) $(pdtinfo_DEPENDENCIES) 
+pdtinfo$(EXEEXT): $(pdtinfo_OBJECTS) $(pdtinfo_DEPENDENCIES) $(EXTRA_pdtinfo_DEPENDENCIES) 
 	@rm -f pdtinfo$(EXEEXT)
 	$(CXXLINK) $(pdtinfo_OBJECTS) $(pdtinfo_LDADD) $(LIBS)
-pdtreplace$(EXEEXT): $(pdtreplace_OBJECTS) $(pdtreplace_DEPENDENCIES) 
+pdtreplace$(EXEEXT): $(pdtreplace_OBJECTS) $(pdtreplace_DEPENDENCIES) $(EXTRA_pdtreplace_DEPENDENCIES) 
 	@rm -f pdtreplace$(EXEEXT)
 	$(CXXLINK) $(pdtreplace_OBJECTS) $(pdtreplace_LDADD) $(LIBS)
-pdtreverse$(EXEEXT): $(pdtreverse_OBJECTS) $(pdtreverse_DEPENDENCIES) 
+pdtreverse$(EXEEXT): $(pdtreverse_OBJECTS) $(pdtreverse_DEPENDENCIES) $(EXTRA_pdtreverse_DEPENDENCIES) 
 	@rm -f pdtreverse$(EXEEXT)
 	$(CXXLINK) $(pdtreverse_OBJECTS) $(pdtreverse_LDADD) $(LIBS)
-pdtshortestpath$(EXEEXT): $(pdtshortestpath_OBJECTS) $(pdtshortestpath_DEPENDENCIES) 
+pdtshortestpath$(EXEEXT): $(pdtshortestpath_OBJECTS) $(pdtshortestpath_DEPENDENCIES) $(EXTRA_pdtshortestpath_DEPENDENCIES) 
 	@rm -f pdtshortestpath$(EXEEXT)
 	$(CXXLINK) $(pdtshortestpath_OBJECTS) $(pdtshortestpath_LDADD) $(LIBS)
 
@@ -554,10 +557,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/extensions/pdt/pdtcompose.cc b/src/extensions/pdt/pdtcompose.cc
index 0076e1d..b33862f 100644
--- a/src/extensions/pdt/pdtcompose.cc
+++ b/src/extensions/pdt/pdtcompose.cc
@@ -31,6 +31,9 @@
 DEFINE_string(pdt_parentheses, "", "PDT parenthesis label pairs.");
 DEFINE_bool(left_pdt, true, "1st arg is PDT (o.w. 2nd arg).");
 DEFINE_bool(connect, true, "Trim output");
+DEFINE_string(compose_filter, "paren",
+              "Composition filter, one of: \"expand\", \"expand_paren\", "
+              "\"paren\"");
 
 int main(int argc, char **argv) {
   namespace s = fst::script;
@@ -70,7 +73,22 @@
   fst::ReadLabelPairs(FLAGS_pdt_parentheses, &parens, false);
 
   s::VectorFstClass ofst(ifst1->ArcType());
-  fst::ComposeOptions copts(false);
+
+  fst::PdtComposeFilter compose_filter;
+
+  if (FLAGS_compose_filter == "expand") {
+    compose_filter = fst::EXPAND_FILTER;
+  } else if (FLAGS_compose_filter == "expand_paren") {
+    compose_filter = fst::EXPAND_PAREN_FILTER;
+  } else if (FLAGS_compose_filter == "paren") {
+    compose_filter = fst::PAREN_FILTER;
+  } else {
+    LOG(ERROR) << argv[0] << "Unknown compose filter type: "
+               << FLAGS_compose_filter;
+    return 1;
+  }
+
+  fst::PdtComposeOptions copts(false, compose_filter);
 
   s::PdtCompose(*ifst1, *ifst2, parens, &ofst, copts, FLAGS_left_pdt);
 
diff --git a/src/extensions/pdt/pdtscript.cc b/src/extensions/pdt/pdtscript.cc
index 33e29ce..031b9dd 100644
--- a/src/extensions/pdt/pdtscript.cc
+++ b/src/extensions/pdt/pdtscript.cc
@@ -41,7 +41,7 @@
                 const FstClass &ifst2,
                 const vector<pair<int64, int64> > &parens,
                 MutableFstClass *ofst,
-                const ComposeOptions &copts,
+                const PdtComposeOptions &copts,
                 bool left_pdt) {
   if (!ArcTypesMatch(ifst1, ifst2, "PdtCompose") ||
       !ArcTypesMatch(ifst1, *ofst, "PdtCompose")) return;
diff --git a/src/include/Makefile.am b/src/include/Makefile.am
index e9eb92f..35932f9 100644
--- a/src/include/Makefile.am
+++ b/src/include/Makefile.am
@@ -27,16 +27,16 @@
 fst/script/closure.h fst/script/compile-impl.h fst/script/compile.h \
 fst/script/compose.h fst/script/concat.h fst/script/connect.h \
 fst/script/convert.h fst/script/decode.h fst/script/determinize.h \
-fst/script/difference.h fst/script/draw-impl.h fst/script/draw.h \
-fst/script/encode.h fst/script/epsnormalize.h fst/script/equal.h \
-fst/script/equivalent.h fst/script/fst-class.h fst/script/fstscript.h \
-fst/script/info-impl.h fst/script/info.h fst/script/intersect.h \
-fst/script/invert.h fst/script/map.h fst/script/minimize.h \
-fst/script/print-impl.h fst/script/print.h fst/script/project.h \
-fst/script/prune.h fst/script/push.h fst/script/randequivalent.h \
-fst/script/randgen.h fst/script/register.h fst/script/relabel.h \
-fst/script/replace.h fst/script/reverse.h fst/script/reweight.h \
-fst/script/rmepsilon.h fst/script/script-impl.h \
+fst/script/difference.h fst/script/disambiguate.h  fst/script/draw-impl.h \
+fst/script/draw.h fst/script/encode.h fst/script/epsnormalize.h \
+fst/script/equal.h fst/script/equivalent.h fst/script/fst-class.h \
+fst/script/fstscript.h fst/script/info-impl.h fst/script/info.h \
+fst/script/intersect.h fst/script/invert.h fst/script/map.h \
+fst/script/minimize.h fst/script/print-impl.h fst/script/print.h \
+fst/script/project.h fst/script/prune.h fst/script/push.h \
+fst/script/randequivalent.h fst/script/randgen.h fst/script/register.h \
+fst/script/relabel.h fst/script/replace.h fst/script/reverse.h \
+fst/script/reweight.h fst/script/rmepsilon.h fst/script/script-impl.h \
 fst/script/shortest-distance.h fst/script/shortest-path.h \
 fst/script/symbols.h fst/script/synchronize.h fst/script/text-io.h \
 fst/script/topsort.h fst/script/union.h fst/script/weight-class.h \
@@ -67,7 +67,7 @@
 fst/lookahead-filter.h fst/generic-register.h fst/edit-fst.h \
 fst/replace-util.h fst/icu.h fst/string.h fst/signed-log-weight.h \
 fst/sparse-tuple-weight.h fst/sparse-power-weight.h fst/expectation-weight.h \
-fst/symbol-table-ops.h fst/bi-table.h \
+fst/symbol-table-ops.h fst/bi-table.h fst/mapped-file.h \
 $(far_include_headers) \
 $(ngram_include_headers) \
 $(pdt_include_headers) \
diff --git a/src/include/Makefile.in b/src/include/Makefile.in
index b4e3f86..688510a 100644
--- a/src/include/Makefile.in
+++ b/src/include/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -38,10 +38,10 @@
 DIST_COMMON = $(am__nobase_include_HEADERS_DIST) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -80,7 +80,7 @@
 	fst/replace-util.h fst/icu.h fst/string.h \
 	fst/signed-log-weight.h fst/sparse-tuple-weight.h \
 	fst/sparse-power-weight.h fst/expectation-weight.h \
-	fst/symbol-table-ops.h fst/bi-table.h \
+	fst/symbol-table-ops.h fst/bi-table.h fst/mapped-file.h \
 	fst/extensions/far/compile-strings.h \
 	fst/extensions/far/create.h fst/extensions/far/equal.h \
 	fst/extensions/far/extract.h fst/extensions/far/far.h \
@@ -101,7 +101,8 @@
 	fst/script/compose.h fst/script/concat.h fst/script/connect.h \
 	fst/script/convert.h fst/script/decode.h \
 	fst/script/determinize.h fst/script/difference.h \
-	fst/script/draw-impl.h fst/script/draw.h fst/script/encode.h \
+	fst/script/disambiguate.h fst/script/draw-impl.h \
+	fst/script/draw.h fst/script/encode.h \
 	fst/script/epsnormalize.h fst/script/equal.h \
 	fst/script/equivalent.h fst/script/fst-class.h \
 	fst/script/fstscript.h fst/script/info-impl.h \
@@ -139,6 +140,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(includedir)"
 HEADERS = $(nobase_include_HEADERS)
 ETAGS = etags
@@ -163,6 +170,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -172,11 +180,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -191,6 +194,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -216,6 +220,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -250,7 +255,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -289,16 +293,16 @@
 fst/script/closure.h fst/script/compile-impl.h fst/script/compile.h \
 fst/script/compose.h fst/script/concat.h fst/script/connect.h \
 fst/script/convert.h fst/script/decode.h fst/script/determinize.h \
-fst/script/difference.h fst/script/draw-impl.h fst/script/draw.h \
-fst/script/encode.h fst/script/epsnormalize.h fst/script/equal.h \
-fst/script/equivalent.h fst/script/fst-class.h fst/script/fstscript.h \
-fst/script/info-impl.h fst/script/info.h fst/script/intersect.h \
-fst/script/invert.h fst/script/map.h fst/script/minimize.h \
-fst/script/print-impl.h fst/script/print.h fst/script/project.h \
-fst/script/prune.h fst/script/push.h fst/script/randequivalent.h \
-fst/script/randgen.h fst/script/register.h fst/script/relabel.h \
-fst/script/replace.h fst/script/reverse.h fst/script/reweight.h \
-fst/script/rmepsilon.h fst/script/script-impl.h \
+fst/script/difference.h fst/script/disambiguate.h  fst/script/draw-impl.h \
+fst/script/draw.h fst/script/encode.h fst/script/epsnormalize.h \
+fst/script/equal.h fst/script/equivalent.h fst/script/fst-class.h \
+fst/script/fstscript.h fst/script/info-impl.h fst/script/info.h \
+fst/script/intersect.h fst/script/invert.h fst/script/map.h \
+fst/script/minimize.h fst/script/print-impl.h fst/script/print.h \
+fst/script/project.h fst/script/prune.h fst/script/push.h \
+fst/script/randequivalent.h fst/script/randgen.h fst/script/register.h \
+fst/script/relabel.h fst/script/replace.h fst/script/reverse.h \
+fst/script/reweight.h fst/script/rmepsilon.h fst/script/script-impl.h \
 fst/script/shortest-distance.h fst/script/shortest-path.h \
 fst/script/symbols.h fst/script/synchronize.h fst/script/text-io.h \
 fst/script/topsort.h fst/script/union.h fst/script/weight-class.h \
@@ -329,7 +333,7 @@
 fst/lookahead-filter.h fst/generic-register.h fst/edit-fst.h \
 fst/replace-util.h fst/icu.h fst/string.h fst/signed-log-weight.h \
 fst/sparse-tuple-weight.h fst/sparse-power-weight.h fst/expectation-weight.h \
-fst/symbol-table-ops.h fst/bi-table.h \
+fst/symbol-table-ops.h fst/bi-table.h fst/mapped-file.h \
 $(far_include_headers) \
 $(ngram_include_headers) \
 $(pdt_include_headers) \
@@ -394,9 +398,7 @@
 	@$(NORMAL_UNINSTALL)
 	@list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
 	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(includedir)" && rm -f $$files
+	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
@@ -497,10 +499,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/include/fst/arc-map.h b/src/include/fst/arc-map.h
index 914f81c..c33b546 100644
--- a/src/include/fst/arc-map.h
+++ b/src/include/fst/arc-map.h
@@ -165,8 +165,8 @@
           } else {
             fst->SetFinal(s, final_arc.weight);
           }
-          break;
         }
+        break;
       }
       case MAP_REQUIRE_SUPERFINAL: {
         if (s != superfinal) {
@@ -315,8 +315,6 @@
   using FstImpl<B>::SetInputSymbols;
   using FstImpl<B>::SetOutputSymbols;
 
-  using VectorFstBaseImpl<typename CacheImpl<B>::State>::NumStates;
-
   using CacheImpl<B>::PushArc;
   using CacheImpl<B>::HasArcs;
   using CacheImpl<B>::HasFinal;
diff --git a/src/include/fst/bi-table.h b/src/include/fst/bi-table.h
index bd37781..d220ce4 100644
--- a/src/include/fst/bi-table.h
+++ b/src/include/fst/bi-table.h
@@ -23,9 +23,15 @@
 #define FST_LIB_BI_TABLE_H__
 
 #include <deque>
+using std::deque;
+#include <functional>
 #include <vector>
 using std::vector;
 
+#include <tr1/unordered_set>
+using std::tr1::unordered_set;
+using std::tr1::unordered_multiset;
+
 namespace fst {
 
 // BI TABLES - these determine a bijective mapping between an
@@ -49,14 +55,33 @@
 // };
 
 // An implementation using a hash map for the entry to ID mapping.
-// The  entry T must have == defined and the default constructor
-// must produce an entry that will never be seen. H is the hash function.
-template <class I, class T, class H>
+// H is the hash function and E is the equality function.
+// If passed to the constructor, ownership is given to this class.
+
+template <class I, class T, class H, class E = std::equal_to<T> >
 class HashBiTable {
  public:
+  // Reserves space for 'table_size' elements.
+  explicit HashBiTable(size_t table_size = 0, H *h = 0, E *e = 0)
+      : hash_func_(h),
+        hash_equal_(e),
+        entry2id_(table_size, (h ? *h : H()), (e ? *e : E())) {
+    if (table_size)
+      id2entry_.reserve(table_size);
+  }
 
-  HashBiTable() {
-    T empty_entry;
+  HashBiTable(const HashBiTable<I, T, H, E> &table)
+      : hash_func_(table.hash_func_ ? new H(*table.hash_func_) : 0),
+        hash_equal_(table.hash_equal_ ? new E(*table.hash_equal_) : 0),
+        entry2id_(table.entry2id_.begin(), table.entry2id_.end(),
+                  table.entry2id_.size(),
+                  (hash_func_ ? *hash_func_ : H()),
+                  (hash_equal_ ? *hash_equal_ : E())),
+        id2entry_(table.id2entry_) { }
+
+  ~HashBiTable() {
+    delete hash_func_;
+    delete hash_equal_;
   }
 
   I FindId(const T &entry, bool insert = true) {
@@ -79,39 +104,67 @@
   I Size() const { return id2entry_.size(); }
 
  private:
-  unordered_map<T, I, H> entry2id_;
+  H *hash_func_;
+  E *hash_equal_;
+  unordered_map<T, I, H, E> entry2id_;
   vector<T> id2entry_;
 
-  DISALLOW_COPY_AND_ASSIGN(HashBiTable);
+  void operator=(const HashBiTable<I, T, H, E> &table);  // disallow
 };
 
 
-// An implementation using a hash set for the entry to ID
-// mapping.  The hash set holds 'keys' which are either the ID
-// or kCurrentKey.  These keys can be mapped to entrys either by
-// looking up in the entry vector or, if kCurrentKey, in current_entry_
-// member. The hash and key equality functions map to entries first.
-// The  entry T must have == defined and the default constructor
-// must produce a entry that will never be seen. H is the hash
-// function.
-template <class I, class T, class H>
+// Enables alternative hash set representations below.
+// typedef enum { HS_STL = 0, HS_DENSE = 1, HS_SPARSE = 2 } HSType;
+typedef enum { HS_STL = 0, HS_DENSE = 1, HS_SPARSE = 2 } HSType;
+
+// Default hash set is STL hash_set
+template<class K, class H, class E, HSType>
+struct  HashSet : public unordered_set<K, H, E> {
+  HashSet(size_t n = 0, const H &h = H(), const E &e = E())
+      : unordered_set<K, H, E>(n, h, e)  { }
+
+  void rehash(size_t n) { }
+};
+
+
+// An implementation using a hash set for the entry to ID mapping.
+// The hash set holds 'keys' which are either the ID or kCurrentKey.
+// These keys can be mapped to entrys either by looking up in the
+// entry vector or, if kCurrentKey, in current_entry_ member. The hash
+// and key equality functions map to entries first. H
+// is the hash function and E is the equality function. If passed to
+// the constructor, ownership is given to this class.
+template <class I, class T, class H,
+          class E = std::equal_to<T>, HSType HS = HS_DENSE>
 class CompactHashBiTable {
  public:
   friend class HashFunc;
   friend class HashEqual;
 
-  CompactHashBiTable()
-      : hash_func_(*this),
-        hash_equal_(*this),
-        keys_(0, hash_func_, hash_equal_) {
+  // Reserves space for 'table_size' elements.
+  explicit CompactHashBiTable(size_t table_size = 0, H *h = 0, E *e = 0)
+      : hash_func_(h),
+        hash_equal_(e),
+        compact_hash_func_(*this),
+        compact_hash_equal_(*this),
+        keys_(table_size, compact_hash_func_, compact_hash_equal_) {
+    if (table_size)
+      id2entry_.reserve(table_size);
   }
 
-  // Reserves space for table_size elements.
-  explicit CompactHashBiTable(size_t table_size)
-      : hash_func_(*this),
-        hash_equal_(*this),
-        keys_(table_size, hash_func_, hash_equal_) {
-    id2entry_.reserve(table_size);
+  CompactHashBiTable(const CompactHashBiTable<I, T, H, E, HS> &table)
+      : hash_func_(table.hash_func_ ? new H(*table.hash_func_) : 0),
+        hash_equal_(table.hash_equal_ ? new E(*table.hash_equal_) : 0),
+        compact_hash_func_(*this),
+        compact_hash_equal_(*this),
+        keys_(table.keys_.size(), compact_hash_func_, compact_hash_equal_),
+        id2entry_(table.id2entry_) {
+    keys_.insert(table.keys_.begin(), table.keys_.end());
+ }
+
+  ~CompactHashBiTable() {
+    delete hash_func_;
+    delete hash_equal_;
   }
 
   I FindId(const T &entry, bool insert = true) {
@@ -132,20 +185,40 @@
   }
 
   const T &FindEntry(I s) const { return id2entry_[s]; }
+
   I Size() const { return id2entry_.size(); }
 
+  // Clear content. With argument, erases last n IDs.
+  void Clear(ssize_t n = -1) {
+    if (n < 0 || n > id2entry_.size())
+      n = id2entry_.size();
+    while (n-- > 0) {
+      I key = id2entry_.size() - 1;
+      keys_.erase(key);
+      id2entry_.pop_back();
+    }
+    keys_.rehash(0);
+  }
+
  private:
-  static const I kEmptyKey;    // -1
-  static const I kCurrentKey;  // -2
+  static const I kCurrentKey;    // -1
+  static const I kEmptyKey;      // -2
+  static const I kDeletedKey;    // -3
 
   class HashFunc {
    public:
     HashFunc(const CompactHashBiTable &ht) : ht_(&ht) {}
 
-    size_t operator()(I k) const { return hf(ht_->Key2T(k)); }
+    size_t operator()(I k) const {
+      if (k >= kCurrentKey) {
+        return (*ht_->hash_func_)(ht_->Key2Entry(k));
+      } else {
+        return 0;
+      }
+    }
+
    private:
     const CompactHashBiTable *ht_;
-    H hf;
   };
 
   class HashEqual {
@@ -153,38 +226,45 @@
     HashEqual(const CompactHashBiTable &ht) : ht_(&ht) {}
 
     bool operator()(I k1, I k2) const {
-      return ht_->Key2T(k1) == ht_->Key2T(k2);
+      if (k1 >= kCurrentKey && k2 >= kCurrentKey) {
+        return (*ht_->hash_equal_)(ht_->Key2Entry(k1), ht_->Key2Entry(k2));
+      } else {
+        return k1 == k2;
+      }
     }
    private:
     const CompactHashBiTable *ht_;
   };
 
-  typedef unordered_set<I, HashFunc, HashEqual> KeyHashSet;
+  typedef HashSet<I, HashFunc, HashEqual, HS> KeyHashSet;
 
-  const T &Key2T(I k) const {
-    if (k == kEmptyKey)
-      return empty_entry_;
-    else if (k == kCurrentKey)
+  const T &Key2Entry(I k) const {
+    if (k == kCurrentKey)
       return *current_entry_;
     else
       return id2entry_[k];
   }
 
-  HashFunc hash_func_;
-  HashEqual hash_equal_;
+  H *hash_func_;
+  E *hash_equal_;
+  HashFunc compact_hash_func_;
+  HashEqual compact_hash_equal_;
   KeyHashSet keys_;
   vector<T> id2entry_;
-  const T empty_entry_;
   const T *current_entry_;
 
-  DISALLOW_COPY_AND_ASSIGN(CompactHashBiTable);
+  void operator=(const CompactHashBiTable<I, T, H, E, HS> &table);  // disallow
 };
 
-template <class I, class T, class H>
-const I CompactHashBiTable<I, T, H>::kEmptyKey = -1;
 
-template <class I, class T, class H>
-const I CompactHashBiTable<I, T, H>::kCurrentKey = -2;
+template <class I, class T, class H, class E, HSType HS>
+const I CompactHashBiTable<I, T, H, E, HS>::kCurrentKey = -1;
+
+template <class I, class T, class H, class E, HSType HS>
+const I CompactHashBiTable<I, T, H, E, HS>::kEmptyKey = -2;
+
+template <class I, class T, class H, class E, HSType HS>
+const I CompactHashBiTable<I, T, H, E, HS>::kDeletedKey = -3;
 
 
 // An implementation using a vector for the entry to ID mapping.
@@ -196,7 +276,17 @@
 template <class I, class T, class FP>
 class VectorBiTable {
  public:
-  explicit VectorBiTable(FP *fp = 0) : fp_(fp ? fp : new FP()) {}
+  // Reserves space for 'table_size' elements.
+  explicit VectorBiTable(FP *fp = 0, size_t table_size = 0)
+      : fp_(fp ? fp : new FP()) {
+    if (table_size)
+      id2entry_.reserve(table_size);
+  }
+
+  VectorBiTable(const VectorBiTable<I, T, FP> &table)
+      : fp_(table.fp_ ? new FP(*table.fp_) : 0),
+        fp2id_(table.fp2id_),
+        id2entry_(table.id2entry_) { }
 
   ~VectorBiTable() { delete fp_; }
 
@@ -227,7 +317,7 @@
   vector<I> fp2id_;
   vector<T> id2entry_;
 
-  DISALLOW_COPY_AND_ASSIGN(VectorBiTable);
+  void operator=(const VectorBiTable<I, T, FP> &table);  // disallow
 };
 
 
@@ -235,20 +325,21 @@
 // selecting functor S returns true for entries to be hashed in the
 // vector.  The fingerprinting functor FP returns a unique fingerprint
 // for each entry to be hashed in the vector (these need to be
-// suitable for indexing in a vector).  The hash functor H is used when
-// hashing entry into the compact hash table.
-template <class I, class T, class S, class FP, class H>
+// suitable for indexing in a vector).  The hash functor H is used
+// when hashing entry into the compact hash table.  If passed to the
+// constructor, ownership is given to this class.
+template <class I, class T, class S, class FP, class H, HSType HS = HS_DENSE>
 class VectorHashBiTable {
  public:
   friend class HashFunc;
   friend class HashEqual;
 
-  VectorHashBiTable(S *s, FP *fp, H *h,
-                       size_t vector_size = 0,
-                       size_t entry_size = 0)
+  explicit VectorHashBiTable(S *s, FP *fp = 0, H *h = 0,
+                             size_t vector_size = 0,
+                             size_t entry_size = 0)
       : selector_(s),
-        fp_(fp),
-        h_(h),
+        fp_(fp ? fp : new FP()),
+        h_(h ? h : new H()),
         hash_func_(*this),
         hash_equal_(*this),
         keys_(0, hash_func_, hash_equal_) {
@@ -256,6 +347,18 @@
       fp2id_.reserve(vector_size);
     if (entry_size)
       id2entry_.reserve(entry_size);
+ }
+
+  VectorHashBiTable(const VectorHashBiTable<I, T, S, FP, H, HS> &table)
+      : selector_(new S(table.s_)),
+        fp_(table.fp_ ? new FP(*table.fp_) : 0),
+        h_(table.h_ ? new H(*table.h_) : 0),
+        id2entry_(table.id2entry_),
+        fp2id_(table.fp2id_),
+        hash_func_(*this),
+        hash_equal_(*this),
+        keys_(table.keys_.size(), hash_func_, hash_equal_) {
+     keys_.insert(table.keys_.begin(), table.keys_.end());
   }
 
   ~VectorHashBiTable() {
@@ -309,14 +412,20 @@
   const H &Hash() const { return *h_; }
 
  private:
-  static const I kEmptyKey;
-  static const I kCurrentKey;
+  static const I kCurrentKey;  // -1
+  static const I kEmptyKey;    // -2
 
   class HashFunc {
    public:
     HashFunc(const VectorHashBiTable &ht) : ht_(&ht) {}
 
-    size_t operator()(I k) const { return (*(ht_->h_))(ht_->Key2Entry(k)); }
+    size_t operator()(I k) const {
+      if (k >= kCurrentKey) {
+        return (*(ht_->h_))(ht_->Key2Entry(k));
+      } else {
+        return 0;
+      }
+    }
    private:
     const VectorHashBiTable *ht_;
   };
@@ -326,53 +435,54 @@
     HashEqual(const VectorHashBiTable &ht) : ht_(&ht) {}
 
     bool operator()(I k1, I k2) const {
-      return ht_->Key2Entry(k1) == ht_->Key2Entry(k2);
+      if (k1 >= kCurrentKey && k2 >= kCurrentKey) {
+        return ht_->Key2Entry(k1) == ht_->Key2Entry(k2);
+      } else {
+        return k1 == k2;
+      }
     }
    private:
     const VectorHashBiTable *ht_;
   };
 
-  typedef unordered_set<I, HashFunc, HashEqual> KeyHashSet;
+  typedef HashSet<I, HashFunc, HashEqual, HS> KeyHashSet;
 
   const T &Key2Entry(I k) const {
-    if (k == kEmptyKey)
-      return empty_entry_;
-    else if (k == kCurrentKey)
+    if (k == kCurrentKey)
       return *current_entry_;
     else
       return id2entry_[k];
   }
 
-
   S *selector_;  // Returns true if entry hashed into vector
   FP *fp_;       // Fingerprint used when hashing entry into vector
   H *h_;         // Hash function used when hashing entry into hash_set
 
   vector<T> id2entry_;  // Maps state IDs to entry
-  vector<I> fp2id_;        // Maps entry fingerprints to IDs
+  vector<I> fp2id_;     // Maps entry fingerprints to IDs
 
   // Compact implementation of the hash table mapping entrys to
   // state IDs using the hash function 'h_'
   HashFunc hash_func_;
   HashEqual hash_equal_;
   KeyHashSet keys_;
-  const T empty_entry_;
   const T *current_entry_;
 
-  DISALLOW_COPY_AND_ASSIGN(VectorHashBiTable);
+  // disallow
+  void operator=(const VectorHashBiTable<I, T, S, FP, H, HS> &table);
 };
 
-template <class I, class T, class S, class FP, class H>
-const I VectorHashBiTable<I, T, S, FP, H>::kEmptyKey = -1;
+template <class I, class T, class S, class FP, class H, HSType HS>
+const I VectorHashBiTable<I, T, S, FP, H, HS>::kCurrentKey = -1;
 
-template <class I, class T, class S, class FP, class H>
-const I VectorHashBiTable<I, T, S, FP, H>::kCurrentKey = -2;
+template <class I, class T, class S, class FP, class H, HSType HS>
+const I VectorHashBiTable<I, T, S, FP, H, HS>::kEmptyKey = -3;
 
 
 // An implementation using a hash map for the entry to ID
-// mapping. This version permits erasing of s.  The  entry T
-// must have == defined and its default constructor must produce a
-// entry that will never be seen. F is the hash function.
+// mapping. This version permits erasing of arbitrary states.  The
+// entry T must have == defined and its default constructor must
+// produce a entry that will never be seen. F is the hash function.
 template <class I, class T, class F>
 class ErasableBiTable {
  public:
@@ -413,7 +523,8 @@
   const T empty_entry_;
   I first_;        // I of first element in the deque;
 
-  DISALLOW_COPY_AND_ASSIGN(ErasableBiTable);
+  // disallow
+  void operator=(const ErasableBiTable<I, T, F> &table);  //disallow
 };
 
 }  // namespace fst
diff --git a/src/include/fst/cache.h b/src/include/fst/cache.h
index 0177396..7c96fe1 100644
--- a/src/include/fst/cache.h
+++ b/src/include/fst/cache.h
@@ -89,14 +89,15 @@
 // CacheState below). This class is used to cache FST elements with
 // the flags used to indicate what has been cached. Use HasStart()
 // HasFinal(), and HasArcs() to determine if cached and SetStart(),
-// SetFinal(), AddArc(), (or PushArc() and SetArcs()) to cache. Note you
-// must set the final weight even if the state is non-final to mark it as
-// cached. If the 'gc' option is 'false', cached items have the extent
-// of the FST - minimizing computation. If the 'gc' option is 'true',
-// garbage collection of states (not in use in an arc iterator) is
-// performed, in a rough approximation of LRU order, when 'gc_limit'
-// bytes is reached - controlling memory use. When 'gc_limit' is 0,
-// special optimizations apply - minimizing memory use.
+// SetFinal(), AddArc(), (or PushArc() and SetArcs()) to cache. Note
+// you must set the final weight even if the state is non-final to
+// mark it as cached. If the 'gc' option is 'false', cached items have
+// the extent of the FST - minimizing computation. If the 'gc' option
+// is 'true', garbage collection of states (not in use in an arc
+// iterator and not 'protected') is performed, in a rough
+// approximation of LRU order, when 'gc_limit' bytes is reached -
+// controlling memory use. When 'gc_limit' is 0, special optimizations
+// apply - minimizing memory use.
 
 template <class S, class C = DefaultCacheStateAllocator<S> >
 class CacheBaseImpl : public VectorFstBaseImpl<S> {
@@ -111,8 +112,10 @@
   using FstImpl<Arc>::Properties;
   using FstImpl<Arc>::SetProperties;
   using VectorFstBaseImpl<State>::NumStates;
+  using VectorFstBaseImpl<State>::Start;
   using VectorFstBaseImpl<State>::AddState;
   using VectorFstBaseImpl<State>::SetState;
+  using VectorFstBaseImpl<State>::ReserveStates;
 
   explicit CacheBaseImpl(C *allocator = 0)
       : cache_start_(false), nknown_states_(0), min_unexpanded_state_id_(0),
@@ -120,27 +123,57 @@
         cache_gc_(FLAGS_fst_default_cache_gc),  cache_size_(0),
         cache_limit_(FLAGS_fst_default_cache_gc_limit > kMinCacheLimit ||
                      FLAGS_fst_default_cache_gc_limit == 0 ?
-                     FLAGS_fst_default_cache_gc_limit : kMinCacheLimit) {
-          allocator_ = allocator ? allocator : new C();
-        }
+                     FLAGS_fst_default_cache_gc_limit : kMinCacheLimit),
+        protect_(false) {
+    allocator_ = allocator ? allocator : new C();
+  }
 
   explicit CacheBaseImpl(const CacheOptions &opts, C *allocator = 0)
       : cache_start_(false), nknown_states_(0),
         min_unexpanded_state_id_(0), cache_first_state_id_(kNoStateId),
         cache_first_state_(0), cache_gc_(opts.gc), cache_size_(0),
         cache_limit_(opts.gc_limit > kMinCacheLimit || opts.gc_limit == 0 ?
-                     opts.gc_limit : kMinCacheLimit) {
-          allocator_ = allocator ? allocator : new C();
-        }
+                     opts.gc_limit : kMinCacheLimit),
+        protect_(false) {
+    allocator_ = allocator ? allocator : new C();
+  }
 
-  // Preserve gc parameters, but initially cache nothing.
-  CacheBaseImpl(const CacheBaseImpl &impl)
-    : cache_start_(false), nknown_states_(0),
-      min_unexpanded_state_id_(0), cache_first_state_id_(kNoStateId),
-      cache_first_state_(0), cache_gc_(impl.cache_gc_), cache_size_(0),
-      cache_limit_(impl.cache_limit_) {
-        allocator_ = new C();
+  // Preserve gc parameters. If preserve_cache true, also preserves
+  // cache data.
+  CacheBaseImpl(const CacheBaseImpl<S, C> &impl, bool preserve_cache = false)
+      : VectorFstBaseImpl<S>(), cache_start_(false), nknown_states_(0),
+        min_unexpanded_state_id_(0), cache_first_state_id_(kNoStateId),
+        cache_first_state_(0), cache_gc_(impl.cache_gc_), cache_size_(0),
+        cache_limit_(impl.cache_limit_),
+        protect_(impl.protect_) {
+    allocator_ = new C();
+    if (preserve_cache) {
+      cache_start_ = impl.cache_start_;
+      nknown_states_ = impl.nknown_states_;
+      expanded_states_ = impl.expanded_states_;
+      min_unexpanded_state_id_ = impl.min_unexpanded_state_id_;
+      if (impl.cache_first_state_id_ != kNoStateId) {
+        cache_first_state_id_ = impl.cache_first_state_id_;
+        cache_first_state_ = allocator_->Allocate(cache_first_state_id_);
+        *cache_first_state_ = *impl.cache_first_state_;
       }
+      cache_states_ = impl.cache_states_;
+      cache_size_ = impl.cache_size_;
+      ReserveStates(impl.NumStates());
+      for (StateId s = 0; s < impl.NumStates(); ++s) {
+        const S *state =
+            static_cast<const VectorFstBaseImpl<S> &>(impl).GetState(s);
+        if (state) {
+          S *copied_state = allocator_->Allocate(s);
+          *copied_state = *state;
+          AddState(copied_state);
+        } else {
+          AddState(0);
+        }
+      }
+      VectorFstBaseImpl<S>::SetStart(impl.Start());
+    }
+  }
 
   ~CacheBaseImpl() {
     allocator_->Free(cache_first_state_, cache_first_state_id_);
@@ -174,49 +207,7 @@
   }
 
   // Gets a state from its ID; add it if necessary.
-  S *ExtendState(StateId s) {
-    if (s == cache_first_state_id_) {
-      return cache_first_state_;                   // Return 1st cached state
-    } else if (cache_limit_ == 0 && cache_first_state_id_ == kNoStateId) {
-      cache_first_state_id_ = s;                   // Remember 1st cached state
-      cache_first_state_ = allocator_->Allocate(s);
-      return cache_first_state_;
-    } else if (cache_first_state_id_ != kNoStateId &&
-               cache_first_state_->ref_count == 0) {
-      // With Default allocator, the Free and Allocate will reuse the same S*.
-      allocator_->Free(cache_first_state_, cache_first_state_id_);
-      cache_first_state_id_ = s;
-      cache_first_state_ = allocator_->Allocate(s);
-      return cache_first_state_;                   // Return 1st cached state
-    } else {
-      while (NumStates() <= s)                     // Add state to main cache
-        AddState(0);
-      if (!VectorFstBaseImpl<S>::GetState(s)) {
-        SetState(s, allocator_->Allocate(s));
-        if (cache_first_state_id_ != kNoStateId) {  // Forget 1st cached state
-          while (NumStates() <= cache_first_state_id_)
-            AddState(0);
-          SetState(cache_first_state_id_, cache_first_state_);
-          if (cache_gc_) {
-            cache_states_.push_back(cache_first_state_id_);
-            cache_size_ += sizeof(S) +
-                           cache_first_state_->arcs.capacity() * sizeof(Arc);
-          }
-          cache_limit_ = kMinCacheLimit;
-          cache_first_state_id_ = kNoStateId;
-          cache_first_state_ = 0;
-        }
-        if (cache_gc_) {
-          cache_states_.push_back(s);
-          cache_size_ += sizeof(S);
-          if (cache_size_ > cache_limit_)
-            GC(s, false);
-        }
-      }
-      S *state = VectorFstBaseImpl<S>::GetState(s);
-      return state;
-    }
-  }
+  S *ExtendState(StateId s);
 
   void SetStart(StateId s) {
     VectorFstBaseImpl<S>::SetStart(s);
@@ -246,7 +237,8 @@
     const Arc *parc = state->arcs.empty() ? 0 : &(state->arcs.back());
     SetProperties(AddArcProperties(Properties(), s, arc, parc));
     state->flags |= kCacheModified;
-    if (cache_gc_ && s != cache_first_state_id_) {
+    if (cache_gc_ && s != cache_first_state_id_ &&
+        !(state->flags & kCacheProtect)) {
       cache_size_ += sizeof(Arc);
       if (cache_size_ > cache_limit_)
         GC(s, false);
@@ -278,7 +270,8 @@
     }
     ExpandedState(s);
     state->flags |= kCacheArcs | kCacheRecent | kCacheModified;
-    if (cache_gc_ && s != cache_first_state_id_) {
+    if (cache_gc_ && s != cache_first_state_id_ &&
+        !(state->flags & kCacheProtect)) {
       cache_size_ += arcs.capacity() * sizeof(Arc);
       if (cache_size_ > cache_limit_)
         GC(s, false);
@@ -300,18 +293,73 @@
       if (arcs[j].olabel == 0)
         --state->noepsilons;
     }
+
     state->arcs.resize(arcs.size() - n);
     SetProperties(DeleteArcsProperties(Properties()));
     state->flags |= kCacheModified;
+    if (cache_gc_ && s != cache_first_state_id_ &&
+        !(state->flags & kCacheProtect)) {
+      cache_size_ -= n * sizeof(Arc);
+    }
   }
 
   void DeleteArcs(StateId s) {
     S *state = ExtendState(s);
+    size_t n = state->arcs.size();
     state->niepsilons = 0;
     state->noepsilons = 0;
     state->arcs.clear();
     SetProperties(DeleteArcsProperties(Properties()));
     state->flags |= kCacheModified;
+    if (cache_gc_ && s != cache_first_state_id_ &&
+        !(state->flags & kCacheProtect)) {
+      cache_size_ -= n * sizeof(Arc);
+    }
+  }
+
+  void DeleteStates(const vector<StateId> &dstates) {
+    size_t old_num_states = NumStates();
+    vector<StateId> newid(old_num_states, 0);
+    for (size_t i = 0; i < dstates.size(); ++i)
+      newid[dstates[i]] = kNoStateId;
+    StateId nstates = 0;
+    for (StateId s = 0; s < old_num_states; ++s) {
+      if (newid[s] != kNoStateId) {
+        newid[s] = nstates;
+        ++nstates;
+      }
+    }
+    // just for states_.resize(), does unnecessary walk.
+    VectorFstBaseImpl<S>::DeleteStates(dstates);
+    SetProperties(DeleteStatesProperties(Properties()));
+    // Update list of cached states.
+    typename list<StateId>::iterator siter = cache_states_.begin();
+    while (siter != cache_states_.end()) {
+      if (newid[*siter] != kNoStateId) {
+        *siter = newid[*siter];
+        ++siter;
+      } else {
+        cache_states_.erase(siter++);
+      }
+    }
+  }
+
+  void DeleteStates() {
+    cache_states_.clear();
+    allocator_->Free(cache_first_state_, cache_first_state_id_);
+    for (int s = 0; s < NumStates(); ++s) {
+      allocator_->Free(VectorFstBaseImpl<S>::GetState(s), s);
+      SetState(s, 0);
+    }
+    nknown_states_ = 0;
+    min_unexpanded_state_id_ = 0;
+    cache_first_state_id_ = kNoStateId;
+    cache_first_state_ = 0;
+    cache_size_ = 0;
+    cache_start_ = false;
+    VectorFstBaseImpl<State>::DeleteStates();
+    SetProperties(DeleteAllStatesProperties(Properties(),
+                                            kExpanded | kMutable));
   }
 
   // Is the start state cached?
@@ -390,48 +438,17 @@
     return min_unexpanded_state_id_;
   }
 
-  // Removes from cache_states_ and uncaches (not referenced-counted)
-  // states that have not been accessed since the last GC until
-  // cache_limit_/3 bytes are uncached.  If that fails to free enough,
-  // recurs uncaching recently visited states as well. If still
-  // unable to free enough memory, then widens cache_limit_.
-  void GC(StateId current, bool free_recent) {
-    if (!cache_gc_)
-      return;
-    VLOG(2) << "CacheImpl: Enter GC: object = " << Type() << "(" << this
-            << "), free recently cached = " << free_recent
-            << ", cache size = " << cache_size_
-            << ", cache limit = " << cache_limit_ << "\n";
-    typename list<StateId>::iterator siter = cache_states_.begin();
+  // Removes from cache_states_ and uncaches (not referenced-counted
+  // or protected) states that have not been accessed since the last
+  // GC until at most cache_fraction * cache_limit_ bytes are cached.
+  // If that fails to free enough, recurs uncaching recently visited
+  // states as well. If still unable to free enough memory, then
+  // widens cache_limit_ to fulfill condition.
+  void GC(StateId current, bool free_recent,  float cache_fraction = 0.666);
 
-    size_t cache_target = (2 * cache_limit_)/3 + 1;
-    while (siter != cache_states_.end()) {
-      StateId s = *siter;
-      S* state = VectorFstBaseImpl<S>::GetState(s);
-      if (cache_size_ > cache_target && state->ref_count == 0 &&
-          (free_recent || !(state->flags & kCacheRecent)) && s != current) {
-        cache_size_ -= sizeof(S) + state->arcs.capacity() * sizeof(Arc);
-        allocator_->Free(state, s);
-        SetState(s, 0);
-        cache_states_.erase(siter++);
-      } else {
-        state->flags &= ~kCacheRecent;
-        ++siter;
-      }
-    }
-    if (!free_recent && cache_size_ > cache_target) {
-      GC(current, true);
-    } else {
-      while (cache_size_ > cache_target) {
-        cache_limit_ *= 2;
-        cache_target *= 2;
-      }
-    }
-    VLOG(2) << "CacheImpl: Exit GC: object = " << Type() << "(" << this
-            << "), free recently cached = " << free_recent
-            << ", cache size = " << cache_size_
-            << ", cache limit = " << cache_limit_ << "\n";
-  }
+  // Setc/clears GC protection: if true, new states are protected
+  // from garbage collection.
+  void GCProtect(bool on) { protect_ = on; }
 
   void ExpandedState(StateId s) {
     if (s < min_unexpanded_state_id_)
@@ -441,26 +458,30 @@
     expanded_states_[s] = true;
   }
 
+  C *GetAllocator() const {
+    return allocator_;
+  }
+
   // Caching on/off switch, limit and size accessors.
   bool GetCacheGc() const { return cache_gc_; }
   size_t GetCacheLimit() const { return cache_limit_; }
   size_t GetCacheSize() const { return cache_size_; }
 
  private:
-  static const size_t kMinCacheLimit = 8096;  // Minimum (non-zero) cache limit
-  static const uint32 kCacheFinal =  0x0001;  // Final weight has been cached
-  static const uint32 kCacheArcs =   0x0002;  // Arcs have been cached
-  static const uint32 kCacheRecent = 0x0004;  // Mark as visited since GC
+  static const size_t kMinCacheLimit = 8096;   // Minimum (non-zero) cache limit
+
+  static const uint32 kCacheFinal =    0x0001;  // Final weight has been cached
+  static const uint32 kCacheArcs =     0x0002;  // Arcs have been cached
+  static const uint32 kCacheRecent =   0x0004;  // Mark as visited since GC
+  static const uint32 kCacheProtect =  0x0008;  // Mark state as GC protected
 
  public:
-  static const uint32 kCacheModified = 0x0008;  // Mark state as modified
+  static const uint32 kCacheModified = 0x0010;  // Mark state as modified
   static const uint32 kCacheFlags = kCacheFinal | kCacheArcs | kCacheRecent
-                                    | kCacheModified;
-
- protected:
-  C *allocator_;                             // used to allocate new states
+      | kCacheProtect | kCacheModified;
 
  private:
+  C *allocator_;                             // used to allocate new states
   mutable bool cache_start_;                 // Is the start state cached?
   StateId nknown_states_;                    // # of known states
   vector<bool> expanded_states_;             // states that have been expanded
@@ -471,10 +492,113 @@
   bool cache_gc_;                            // enable GC
   size_t cache_size_;                        // # of bytes cached
   size_t cache_limit_;                       // # of bytes allowed before GC
+  bool protect_;                             // Protect new states from GC
 
-  void operator=(const CacheBaseImpl<S> &impl);    // disallow
+  void operator=(const CacheBaseImpl<S, C> &impl);    // disallow
 };
 
+// Gets a state from its ID; add it if necessary.
+template <class S, class C>
+S *CacheBaseImpl<S, C>::ExtendState(typename S::Arc::StateId s) {
+  // If 'protect_' true and a new state, protects from garbage collection.
+  if (s == cache_first_state_id_) {
+    return cache_first_state_;                   // Return 1st cached state
+  } else if (cache_limit_ == 0 && cache_first_state_id_ == kNoStateId) {
+    cache_first_state_id_ = s;                   // Remember 1st cached state
+    cache_first_state_ = allocator_->Allocate(s);
+    if (protect_) cache_first_state_->flags |= kCacheProtect;
+    return cache_first_state_;
+  } else if (cache_first_state_id_ != kNoStateId &&
+             cache_first_state_->ref_count == 0 &&
+             !(cache_first_state_->flags & kCacheProtect)) {
+    // With Default allocator, the Free and Allocate will reuse the same S*.
+    allocator_->Free(cache_first_state_, cache_first_state_id_);
+    cache_first_state_id_ = s;
+    cache_first_state_ = allocator_->Allocate(s);
+    if (protect_) cache_first_state_->flags |= kCacheProtect;
+    return cache_first_state_;                   // Return 1st cached state
+  } else {
+    while (NumStates() <= s)                     // Add state to main cache
+      AddState(0);
+    S *state = VectorFstBaseImpl<S>::GetState(s);
+    if (!state) {
+      state = allocator_->Allocate(s);
+      if (protect_) state->flags |= kCacheProtect;
+      SetState(s, state);
+      if (cache_first_state_id_ != kNoStateId) {  // Forget 1st cached state
+        while (NumStates() <= cache_first_state_id_)
+          AddState(0);
+        SetState(cache_first_state_id_, cache_first_state_);
+        if (cache_gc_ && !(cache_first_state_->flags & kCacheProtect)) {
+          cache_states_.push_back(cache_first_state_id_);
+          cache_size_ += sizeof(S) +
+                         cache_first_state_->arcs.capacity() * sizeof(Arc);
+        }
+        cache_limit_ = kMinCacheLimit;
+        cache_first_state_id_ = kNoStateId;
+        cache_first_state_ = 0;
+      }
+      if (cache_gc_ && !protect_) {
+        cache_states_.push_back(s);
+        cache_size_ += sizeof(S);
+        if (cache_size_ > cache_limit_)
+          GC(s, false);
+      }
+    }
+    return state;
+  }
+}
+
+// Removes from cache_states_ and uncaches (not referenced-counted or
+// protected) states that have not been accessed since the last GC
+// until at most cache_fraction * cache_limit_ bytes are cached.  If
+// that fails to free enough, recurs uncaching recently visited states
+// as well. If still unable to free enough memory, then widens cache_limit_
+// to fulfill condition.
+template <class S, class C>
+void CacheBaseImpl<S, C>::GC(typename S::Arc::StateId current,
+                             bool free_recent, float cache_fraction) {
+  if (!cache_gc_)
+    return;
+  VLOG(2) << "CacheImpl: Enter GC: object = " << Type() << "(" << this
+          << "), free recently cached = " << free_recent
+          << ", cache size = " << cache_size_
+          << ", cache frac = " << cache_fraction
+          << ", cache limit = " << cache_limit_ << "\n";
+  typename list<StateId>::iterator siter = cache_states_.begin();
+
+  size_t cache_target = cache_fraction * cache_limit_;
+  while (siter != cache_states_.end()) {
+    StateId s = *siter;
+    S* state = VectorFstBaseImpl<S>::GetState(s);
+    if (cache_size_ > cache_target && state->ref_count == 0 &&
+        (free_recent || !(state->flags & kCacheRecent)) && s != current) {
+      cache_size_ -= sizeof(S) + state->arcs.capacity() * sizeof(Arc);
+      allocator_->Free(state, s);
+      SetState(s, 0);
+      cache_states_.erase(siter++);
+    } else {
+      state->flags &= ~kCacheRecent;
+      ++siter;
+    }
+  }
+  if (!free_recent && cache_size_ > cache_target) {   // recurses on recent
+    GC(current, true);
+  } else if (cache_target > 0) {                      // widens cache limit
+    while (cache_size_ > cache_target) {
+      cache_limit_ *= 2;
+      cache_target *= 2;
+    }
+  } else if (cache_size_ > 0) {
+    FSTERROR() << "CacheImpl:GC: Unable to free all cached states";
+  }
+  VLOG(2) << "CacheImpl: Exit GC: object = " << Type() << "(" << this
+          << "), free recently cached = " << free_recent
+          << ", cache size = " << cache_size_
+          << ", cache frac = " << cache_fraction
+          << ", cache limit = " << cache_limit_ << "\n";
+}
+
 template <class S, class C> const uint32 CacheBaseImpl<S, C>::kCacheFinal;
 template <class S, class C> const uint32 CacheBaseImpl<S, C>::kCacheArcs;
 template <class S, class C> const uint32 CacheBaseImpl<S, C>::kCacheRecent;
@@ -516,7 +640,8 @@
   explicit CacheImpl(const CacheOptions &opts)
       : CacheBaseImpl< CacheState<A> >(opts) {}
 
-  CacheImpl(const CacheImpl<State> &impl) : CacheBaseImpl<State>(impl) {}
+  CacheImpl(const CacheImpl<A> &impl, bool preserve_cache = false)
+      : CacheBaseImpl<State>(impl, preserve_cache) {}
 
  private:
   void operator=(const CacheImpl<State> &impl);    // disallow
@@ -536,12 +661,13 @@
   typedef CacheBaseImpl<State> Impl;
 
   CacheStateIterator(const F &fst, Impl *impl)
-      : fst_(fst), impl_(impl), s_(0) {}
+      : fst_(fst), impl_(impl), s_(0) {
+        fst_.Start();  // force start state
+      }
 
   bool Done() const {
     if (s_ < impl_->NumKnownStates())
       return false;
-    fst_.Start();  // force start state
     if (s_ < impl_->NumKnownStates())
       return false;
     for (StateId u = impl_->MinUnexpandedState();
diff --git a/src/include/fst/compact-fst.h b/src/include/fst/compact-fst.h
index 57c927e..6db3317 100644
--- a/src/include/fst/compact-fst.h
+++ b/src/include/fst/compact-fst.h
@@ -32,6 +32,7 @@
 #include <fst/cache.h>
 #include <fst/expanded-fst.h>
 #include <fst/fst-decl.h>  // For optional argument declarations
+#include <fst/mapped-file.h>
 #include <fst/matcher.h>
 #include <fst/test-properties.h>
 #include <fst/util.h>
@@ -134,7 +135,9 @@
   typedef U Unsigned;
 
   CompactFstData()
-      : states_(0),
+      : states_region_(0),
+        compacts_region_(0),
+        states_(0),
         compacts_(0),
         nstates_(0),
         ncompacts_(0),
@@ -150,8 +153,14 @@
                  const Compactor &compactor);
 
   ~CompactFstData() {
-    delete[] states_;
-    delete[] compacts_;
+    if (states_region_ == NULL) {
+      delete [] states_;
+    }
+    delete states_region_;
+    if (compacts_region_ == NULL) {
+      delete [] compacts_;
+    }
+    delete compacts_region_;
   }
 
   template <class Compactor>
@@ -175,10 +184,9 @@
 
   bool Error() const { return error_; }
 
-  // Byte alignment for states and arcs in file format (version 1 only)
-  static const int kFileAlign = 16;
-
  private:
+  MappedFile *states_region_;
+  MappedFile *compacts_region_;
   Unsigned *states_;
   CompactElement *compacts_;
   size_t nstates_;
@@ -190,13 +198,11 @@
 };
 
 template <class E, class U>
-const int CompactFstData<E, U>::kFileAlign;
-
-
-template <class E, class U>
 template <class A, class C>
 CompactFstData<E, U>::CompactFstData(const Fst<A> &fst, const C &compactor)
-    : states_(0),
+    : states_region_(0),
+      compacts_region_(0),
+      states_(0),
       compacts_(0),
       nstates_(0),
       ncompacts_(0),
@@ -265,7 +271,9 @@
 CompactFstData<E, U>::CompactFstData(const Iterator &begin,
                                      const Iterator &end,
                                      const C &compactor)
-    : states_(0),
+    : states_region_(0),
+      compacts_region_(0),
+      states_(0),
       compacts_(0),
       nstates_(0),
       ncompacts_(0),
@@ -361,42 +369,40 @@
   data->narcs_ = hdr.NumArcs();
 
   if (compactor.Size() == -1) {
-    data->states_ = new Unsigned[data->nstates_ + 1];
-    if ((hdr.GetFlags() & FstHeader::IS_ALIGNED) &&
-        !AlignInput(strm, kFileAlign)) {
+    if ((hdr.GetFlags() & FstHeader::IS_ALIGNED) && !AlignInput(strm)) {
       LOG(ERROR) << "CompactFst::Read: Alignment failed: " << opts.source;
       delete data;
       return 0;
     }
-    // TODO: memory map this
     size_t b = (data->nstates_ + 1) * sizeof(Unsigned);
-    strm.read(reinterpret_cast<char *>(data->states_), b);
-    if (!strm) {
+    data->states_region_ = MappedFile::Map(&strm, opts, b);
+    if (!strm || data->states_region_ == NULL) {
       LOG(ERROR) << "CompactFst::Read: Read failed: " << opts.source;
       delete data;
       return 0;
     }
+    data->states_ = static_cast<Unsigned *>(
+        data->states_region_->mutable_data());
   } else {
     data->states_ = 0;
   }
   data->ncompacts_ = compactor.Size() == -1
       ? data->states_[data->nstates_]
       : data->nstates_ * compactor.Size();
-  data->compacts_ = new CompactElement[data->ncompacts_];
-  // TODO: memory map this
-  size_t b = data->ncompacts_ * sizeof(CompactElement);
-  if ((hdr.GetFlags() & FstHeader::IS_ALIGNED) &&
-      !AlignInput(strm, kFileAlign)) {
+  if ((hdr.GetFlags() & FstHeader::IS_ALIGNED) && !AlignInput(strm)) {
     LOG(ERROR) << "CompactFst::Read: Alignment failed: " << opts.source;
     delete data;
     return 0;
   }
-  strm.read(reinterpret_cast<char *>(data->compacts_), b);
-  if (!strm) {
+  size_t b = data->ncompacts_ * sizeof(CompactElement);
+  data->compacts_region_ = MappedFile::Map(&strm, opts, b);
+  if (!strm || data->compacts_region_ == NULL) {
     LOG(ERROR) << "CompactFst::Read: Read failed: " << opts.source;
     delete data;
     return 0;
   }
+  data->compacts_ = static_cast<CompactElement *>(
+      data->compacts_region_->mutable_data());
   return data;
 }
 
@@ -404,14 +410,14 @@
 bool CompactFstData<E, U>::Write(ostream &strm,
                                  const FstWriteOptions &opts) const {
   if (states_) {
-    if (opts.align && !AlignOutput(strm, kFileAlign)) {
+    if (opts.align && !AlignOutput(strm)) {
       LOG(ERROR) << "CompactFst::Write: Alignment failed: " << opts.source;
       return false;
     }
     strm.write(reinterpret_cast<char *>(states_),
                (nstates_ + 1) * sizeof(Unsigned));
   }
-  if (opts.align && !AlignOutput(strm, kFileAlign)) {
+  if (opts.align && !AlignOutput(strm)) {
     LOG(ERROR) << "CompactFst::Write: Alignment failed: " << opts.source;
     return false;
   }
@@ -899,6 +905,17 @@
     ImplToFst< Impl, ExpandedFst<A> >::SetImpl(impl, own_impl);
   }
 
+  // Use overloading to extract the type of the argument.
+  static Impl* GetImplIfCompactFst(const CompactFst<A, C, U> &compact_fst) {
+    return compact_fst.GetImpl();
+  }
+
+  // This does not give privileged treatment to subclasses of CompactFst.
+  template<typename NonCompactFst>
+  static Impl* GetImplIfCompactFst(const NonCompactFst& fst) {
+    return NULL;
+  }
+
   void operator=(const CompactFst<A, C, U> &fst);  // disallow
 };
 
@@ -914,20 +931,16 @@
   typedef U Unsigned;
   typedef typename C::Element CompactElement;
   typedef typename A::Weight Weight;
-  static const int kFileAlign =
-      CompactFstData<CompactElement, U>::kFileAlign;
   int file_version = opts.align ?
       CompactFstImpl<A, C, U>::kAlignedFileVersion :
       CompactFstImpl<A, C, U>::kFileVersion;
   size_t num_arcs = -1, num_states = -1, num_compacts = -1;
   C first_pass_compactor = compactor;
-  if (fst.Type() == CompactFst<A, C, U>().Type()) {
-    const CompactFst<A, C, U> *compact_fst =
-        reinterpret_cast<const CompactFst<A, C, U> *>(&fst);
-    num_arcs = compact_fst->GetImpl()->Data()->NumArcs();
-    num_states = compact_fst->GetImpl()->Data()->NumStates();
-    num_compacts = compact_fst->GetImpl()->Data()->NumCompacts();
-    first_pass_compactor = *compact_fst->GetImpl()->GetCompactor();
+  if (Impl* impl = GetImplIfCompactFst(fst)) {
+    num_arcs = impl->Data()->NumArcs();
+    num_states = impl->Data()->NumStates();
+    num_compacts = impl->Data()->NumCompacts();
+    first_pass_compactor = *impl->GetCompactor();
   } else {
     // A first pass is needed to compute the state of the compactor, which
     // is saved ahead of the rest of the data structures.  This unfortunately
@@ -971,7 +984,7 @@
                              &hdr);
   first_pass_compactor.Write(strm);
   if (first_pass_compactor.Size() == -1)  {
-    if (opts.align && !AlignOutput(strm, kFileAlign)) {
+    if (opts.align && !AlignOutput(strm)) {
       LOG(ERROR) << "CompactFst::Write: Alignment failed: " << opts.source;
       return false;
     }
@@ -986,7 +999,7 @@
     }
     strm.write(reinterpret_cast<const char *>(&compacts), sizeof(compacts));
   }
-  if (opts.align && !AlignOutput(strm, kFileAlign)) {
+  if (opts.align && !AlignOutput(strm)) {
     LOG(ERROR) << "Could not align file during write after writing states";
   }
   C second_pass_compactor = compactor;
diff --git a/src/include/fst/compose.h b/src/include/fst/compose.h
index dfdff0a..db5ea3a 100644
--- a/src/include/fst/compose.h
+++ b/src/include/fst/compose.h
@@ -122,7 +122,7 @@
 
   ComposeFstImplBase(const Fst<A> &fst1, const Fst<A> &fst2,
                      const CacheOptions &opts)
-      :CacheImpl<A>(opts) {
+      : CacheImpl<A>(opts) {
     VLOG(2) << "ComposeFst(" << this << "): Begin";
     SetType("compose");
 
@@ -137,7 +137,7 @@
   }
 
   ComposeFstImplBase(const ComposeFstImplBase<A> &impl)
-      : CacheImpl<A>(impl) {
+      : CacheImpl<A>(impl, true) {
     SetProperties(impl.Properties(), kCopyProperties);
     SetInputSymbols(impl.InputSymbols());
     SetOutputSymbols(impl.OutputSymbols());
@@ -275,6 +275,13 @@
       OrderedExpand(s, fst2_, s2, fst1_, s1, matcher2_, true);
   }
 
+  const FST1 &GetFst1() { return fst1_; }
+  const FST2 &GetFst2() { return fst2_; }
+  M1 *GetMatcher1() { return matcher1_; }
+  M2 *GetMatcher2() { return matcher2_; }
+  F *GetFilter() { return filter_; }
+  T *GetStateTable() { return state_table_; }
+
  private:
   // This does that actual matching of labels in the composition. The
   // arguments are ordered so matching is called on state 'sa' of
diff --git a/src/include/fst/const-fst.h b/src/include/fst/const-fst.h
index 80efc8d..e6e85af 100644
--- a/src/include/fst/const-fst.h
+++ b/src/include/fst/const-fst.h
@@ -28,6 +28,7 @@
 
 #include <fst/expanded-fst.h>
 #include <fst/fst-decl.h>  // For optional argument declarations
+#include <fst/mapped-file.h>
 #include <fst/test-properties.h>
 #include <fst/util.h>
 
@@ -55,7 +56,8 @@
   typedef U Unsigned;
 
   ConstFstImpl()
-      : states_(0), arcs_(0), nstates_(0), narcs_(0), start_(kNoStateId) {
+      : states_region_(0), arcs_region_(0), states_(0), arcs_(0), nstates_(0),
+        narcs_(0), start_(kNoStateId) {
     string type = "const";
     if (sizeof(U) != sizeof(uint32)) {
       string size;
@@ -69,8 +71,8 @@
   explicit ConstFstImpl(const Fst<A> &fst);
 
   ~ConstFstImpl() {
-    delete[] states_;
-    delete[] arcs_;
+    delete arcs_region_;
+    delete states_region_;
   }
 
   StateId Start() const { return start_; }
@@ -125,9 +127,9 @@
   static const int kAlignedFileVersion = 1;
   // Minimum file format version supported
   static const int kMinFileVersion = 1;
-  // Byte alignment for states and arcs in file format (version 1 only)
-  static const int kFileAlign = 16;
 
+  MappedFile *states_region_;    // Mapped file for states
+  MappedFile *arcs_region_;      // Mapped file for arcs
   State *states_;                // States represenation
   A *arcs_;                      // Arcs representation
   StateId nstates_;              // Number of states
@@ -145,8 +147,6 @@
 const int ConstFstImpl<A, U>::kAlignedFileVersion;
 template <class A, class U>
 const int ConstFstImpl<A, U>::kMinFileVersion;
-template <class A, class U>
-const int ConstFstImpl<A, U>::kFileAlign;
 
 
 template<class A, class U>
@@ -173,8 +173,10 @@
          aiter.Next())
       ++narcs_;
   }
-  states_ = new State[nstates_];
-  arcs_ = new A[narcs_];
+  states_region_ = MappedFile::Allocate(nstates_ * sizeof(*states_));
+  arcs_region_ = MappedFile::Allocate(narcs_ * sizeof(*arcs_));
+  states_ = reinterpret_cast<State*>(states_region_->mutable_data());
+  arcs_ = reinterpret_cast<A*>(arcs_region_->mutable_data());
   size_t pos = 0;
   for (StateId s = 0; s < nstates_; ++s) {
     states_[s].final = fst.Final(s);
@@ -210,39 +212,40 @@
   impl->start_ = hdr.Start();
   impl->nstates_ = hdr.NumStates();
   impl->narcs_ = hdr.NumArcs();
-  impl->states_ = new State[impl->nstates_];
-  impl->arcs_ = new A[impl->narcs_];
 
   // Ensures compatibility
   if (hdr.Version() == kAlignedFileVersion)
     hdr.SetFlags(hdr.GetFlags() | FstHeader::IS_ALIGNED);
 
-  if ((hdr.GetFlags() & FstHeader::IS_ALIGNED) &&
-      !AlignInput(strm, kFileAlign)) {
+  if ((hdr.GetFlags() & FstHeader::IS_ALIGNED) && !AlignInput(strm)) {
     LOG(ERROR) << "ConstFst::Read: Alignment failed: " << opts.source;
     delete impl;
     return 0;
   }
+
   size_t b = impl->nstates_ * sizeof(typename ConstFstImpl<A, U>::State);
-  strm.read(reinterpret_cast<char *>(impl->states_), b);
-  if (!strm) {
+  impl->states_region_ = MappedFile::Map(&strm, opts, b);
+  if (!strm || impl->states_region_ == NULL) {
     LOG(ERROR) << "ConstFst::Read: Read failed: " << opts.source;
     delete impl;
     return 0;
   }
-  if ((hdr.GetFlags() & FstHeader::IS_ALIGNED) &&
-      !AlignInput(strm, kFileAlign)) {
+  impl->states_ = reinterpret_cast<State*>(
+      impl->states_region_->mutable_data());
+  if ((hdr.GetFlags() & FstHeader::IS_ALIGNED) && !AlignInput(strm)) {
     LOG(ERROR) << "ConstFst::Read: Alignment failed: " << opts.source;
     delete impl;
     return 0;
   }
+
   b = impl->narcs_ * sizeof(A);
-  strm.read(reinterpret_cast<char *>(impl->arcs_), b);
-  if (!strm) {
+  impl->arcs_region_ = MappedFile::Map(&strm, opts, b);
+  if (!strm || impl->arcs_region_ == NULL) {
     LOG(ERROR) << "ConstFst::Read: Read failed: " << opts.source;
     delete impl;
     return 0;
   }
+  impl->arcs_ = reinterpret_cast<A*>(impl->arcs_region_->mutable_data());
   return impl;
 }
 
@@ -318,6 +321,17 @@
     ImplToFst< Impl, ExpandedFst<A> >::SetImpl(impl, own_impl);
   }
 
+  // Use overloading to extract the type of the argument.
+  static Impl* GetImplIfConstFst(const ConstFst &const_fst) {
+    return const_fst.GetImpl();
+  }
+
+  // Note that this does not give privileged treatment to subtypes of ConstFst.
+  template<typename NonConstFst>
+  static Impl* GetImplIfConstFst(const NonConstFst& fst) {
+    return NULL;
+  }
+
   void operator=(const ConstFst<A, U> &fst);  // disallow
 };
 
@@ -333,11 +347,9 @@
   size_t num_arcs = -1, num_states = -1;
   size_t start_offset = 0;
   bool update_header = true;
-  if (fst.Type() == ConstFst<A, U>().Type()) {
-    const ConstFst<A, U> *const_fst =
-        reinterpret_cast<const ConstFst<A, U> *>(&fst);
-    num_arcs = const_fst->GetImpl()->narcs_;
-    num_states = const_fst->GetImpl()->nstates_;
+  if (Impl* impl = GetImplIfConstFst(fst)) {
+    num_arcs = impl->narcs_;
+    num_states = impl->nstates_;
     update_header = false;
   } else if ((start_offset = strm.tellp()) == -1) {
     // precompute values needed for header when we cannot seek to rewrite it.
@@ -363,7 +375,7 @@
       ConstFstImpl<A, U>::kStaticProperties;
   FstImpl<A>::WriteFstHeader(fst, strm, opts, file_version, type, properties,
                              &hdr);
-  if (opts.align && !AlignOutput(strm, ConstFstImpl<A, U>::kFileAlign)) {
+  if (opts.align && !AlignOutput(strm)) {
     LOG(ERROR) << "Could not align file during write after header";
     return false;
   }
@@ -381,7 +393,7 @@
   }
   hdr.SetNumStates(states);
   hdr.SetNumArcs(pos);
-  if (opts.align && !AlignOutput(strm, ConstFstImpl<A, U>::kFileAlign)) {
+  if (opts.align && !AlignOutput(strm)) {
     LOG(ERROR) << "Could not align file during write after writing states";
   }
   for (StateIterator<F> siter(fst); !siter.Done(); siter.Next()) {
diff --git a/src/include/fst/determinize.h b/src/include/fst/determinize.h
index a145e4a..9ff8723 100644
--- a/src/include/fst/determinize.h
+++ b/src/include/fst/determinize.h
@@ -33,9 +33,10 @@
 #include <vector>
 using std::vector;
 
-#include <fst/cache.h>
-#include <fst/factor-weight.h>
 #include <fst/arc-map.h>
+#include <fst/cache.h>
+#include <fst/bi-table.h>
+#include <fst/factor-weight.h>
 #include <fst/prune.h>
 #include <fst/test-properties.h>
 
@@ -108,24 +109,244 @@
   D weight_common_divisor_;
 };
 
-// Options for finite-state transducer determinization.
+
+// Represents an element in a subset
+template <class A>
+struct DeterminizeElement {
+  typedef typename A::StateId StateId;
+  typedef typename A::Weight Weight;
+
+  DeterminizeElement() {}
+
+  DeterminizeElement(StateId s, Weight w) : state_id(s), weight(w) {}
+
+  bool operator==(const DeterminizeElement<A> & element) const {
+    return state_id == element.state_id && weight == element.weight;
+  }
+
+  bool operator<(const DeterminizeElement<A> & element) const {
+    return state_id < element.state_id ||
+        (state_id == element.state_id && weight == element.weight);
+  }
+
+  StateId state_id;  // Input state Id
+  Weight weight;     // Residual weight
+};
+
+
+//
+// DETERMINIZE FILTERS - these can be used in determinization to compute
+// transformations on the subsets prior to their being added as destination
+// states. The filter operates on a map between a label and the
+// corresponding destination subsets. The possibly modified map is
+// then used to construct the destination states for arcs exiting state 's'.
+// It must define the ordered map type LabelMap and have a default
+// and copy constructor.
+
+// A determinize filter that does not modify its input.
 template <class Arc>
+struct IdentityDeterminizeFilter {
+  typedef typename Arc::StateId StateId;
+  typedef typename Arc::Label Label;
+  typedef slist< DeterminizeElement<Arc> > Subset;
+  typedef map<Label, Subset*> LabelMap;
+
+  static uint64 Properties(uint64 props) { return props; }
+
+  void operator()(StateId s, LabelMap *label_map) {}
+};
+
+
+//
+// DETERMINIZATION STATE TABLES
+//
+// The determiziation state table has the form:
+//
+// template <class Arc>
+// class DeterminizeStateTable {
+//  public:
+//   typedef typename Arc::StateId StateId;
+//   typedef DeterminizeElement<Arc> Element;
+//   typedef slist<Element> Subset;
+//
+//   // Required constuctor
+//   DeterminizeStateTable();
+//
+//   // Required copy constructor that does not copy state
+//   DeterminizeStateTable(const DeterminizeStateTable<A,P> &table);
+//
+//   // Lookup state ID by subset (not depending of the element order).
+//   // If it doesn't exist, then add it.  FindState takes
+//   // ownership of the subset argument (so that it doesn't have to
+//   // copy it if it creates a new state).
+//   StateId FindState(Subset *subset);
+//
+//   // Lookup subset by ID.
+//   const Subset *FindSubset(StateId id) const;
+// };
+//
+
+// The default determinization state table based on the
+// compact hash bi-table.
+template <class Arc>
+class DefaultDeterminizeStateTable {
+ public:
+  typedef typename Arc::StateId StateId;
+  typedef typename Arc::Label Label;
+  typedef typename Arc::Weight Weight;
+  typedef DeterminizeElement<Arc> Element;
+  typedef slist<Element> Subset;
+
+  explicit DefaultDeterminizeStateTable(size_t table_size = 0)
+      : table_size_(table_size),
+        subsets_(table_size_, new SubsetKey(), new SubsetEqual(&elements_)) { }
+
+  DefaultDeterminizeStateTable(const DefaultDeterminizeStateTable<Arc> &table)
+      : table_size_(table.table_size_),
+        subsets_(table_size_, new SubsetKey(), new SubsetEqual(&elements_)) { }
+
+  ~DefaultDeterminizeStateTable() {
+    for (StateId s = 0; s < subsets_.Size(); ++s)
+      delete subsets_.FindEntry(s);
+  }
+
+  // Finds the state corresponding to a subset. Only creates a new
+  // state if the subset is not found. FindState takes ownership of
+  // the subset argument (so that it doesn't have to copy it if it
+  // creates a new state).
+  StateId FindState(Subset *subset) {
+    StateId ns = subsets_.Size();
+    StateId s = subsets_.FindId(subset);
+    if (s != ns) delete subset;  // subset found
+    return s;
+  }
+
+  const Subset* FindSubset(StateId s) { return subsets_.FindEntry(s); }
+
+ private:
+  // Comparison object for hashing Subset(s). Subsets are not sorted in this
+  // implementation, so ordering must not be assumed in the equivalence
+  // test.
+  class SubsetEqual {
+   public:
+    SubsetEqual() {  // needed for compilation but should never be called
+      FSTERROR() << "SubsetEqual: default constructor not implemented";
+    }
+
+    // Constructor takes vector needed to check equality. See immediately
+    // below for constraints on it.
+    explicit SubsetEqual(vector<Element *> *elements)
+        : elements_(elements) {}
+
+    // At each call to operator(), the elements_ vector should contain
+    // only NULLs. When this operator returns, elements_ will still
+    // have this property.
+    bool operator()(Subset* subset1, Subset* subset2) const {
+      if (!subset1 && !subset2)
+        return true;
+      if ((subset1 && !subset2) || (!subset1 && subset2))
+        return false;
+
+      if (subset1->size() != subset2->size())
+        return false;
+
+      // Loads first subset elements in element vector.
+      for (typename Subset::iterator iter1 = subset1->begin();
+           iter1 != subset1->end();
+           ++iter1) {
+        Element &element1 = *iter1;
+        while (elements_->size() <= element1.state_id)
+          elements_->push_back(0);
+        (*elements_)[element1.state_id] = &element1;
+      }
+
+      // Checks second subset matches first via element vector.
+      for (typename Subset::iterator iter2 = subset2->begin();
+           iter2 != subset2->end();
+           ++iter2) {
+        Element &element2 = *iter2;
+        while (elements_->size() <= element2.state_id)
+          elements_->push_back(0);
+        Element *element1 = (*elements_)[element2.state_id];
+        if (!element1 || element1->weight != element2.weight) {
+          // Mismatch found. Resets element vector before returning false.
+          for (typename Subset::iterator iter1 = subset1->begin();
+               iter1 != subset1->end();
+               ++iter1)
+            (*elements_)[iter1->state_id] = 0;
+          return false;
+        } else {
+          (*elements_)[element2.state_id] = 0;  // Clears entry
+        }
+      }
+      return true;
+    }
+   private:
+    vector<Element *> *elements_;
+  };
+
+  // Hash function for Subset to Fst states. Subset elements are not
+  // sorted in this implementation, so the hash must be invariant
+  // under subset reordering.
+  class SubsetKey {
+   public:
+    size_t operator()(const Subset* subset) const {
+      size_t hash = 0;
+      if (subset) {
+        for (typename Subset::const_iterator iter = subset->begin();
+             iter != subset->end();
+             ++iter) {
+          const Element &element = *iter;
+          int lshift = element.state_id % (CHAR_BIT * sizeof(size_t) - 1) + 1;
+          int rshift = CHAR_BIT * sizeof(size_t) - lshift;
+          size_t n = element.state_id;
+          hash ^= n << lshift ^ n >> rshift ^ element.weight.Hash();
+        }
+      }
+      return hash;
+    }
+  };
+
+  size_t table_size_;
+
+  typedef CompactHashBiTable<StateId, Subset *,
+                             SubsetKey, SubsetEqual, HS_STL>  SubsetTable;
+
+  SubsetTable subsets_;
+  vector<Element *> elements_;
+
+  void operator=(const DefaultDeterminizeStateTable<Arc> &);  // disallow
+};
+
+// Options for finite-state transducer determinization templated on
+// the arc type, common divisor, the determinization filter and the
+// state table.  DeterminizeFst takes ownership of the determinization
+// filter and state table if provided.
+template <class Arc,
+          class D = DefaultCommonDivisor<typename Arc::Weight>,
+          class F = IdentityDeterminizeFilter<Arc>,
+          class T = DefaultDeterminizeStateTable<Arc> >
 struct DeterminizeFstOptions : CacheOptions {
   typedef typename Arc::Label Label;
   float delta;                // Quantization delta for subset weights
   Label subsequential_label;  // Label used for residual final output
                               // when producing subsequential transducers.
+  F *filter;                  // Determinization filter
+  T *state_table;             // Determinization state table
 
   explicit DeterminizeFstOptions(const CacheOptions &opts,
-                                 float del = kDelta,
-                                 Label lab = 0)
-      : CacheOptions(opts), delta(del), subsequential_label(lab) {}
+                                 float del = kDelta, Label lab = 0,
+                                 F *filt = 0,
+                                 T *table = 0)
+      : CacheOptions(opts), delta(del), subsequential_label(lab),
+        filter(filt), state_table(table) {}
 
-  explicit DeterminizeFstOptions(float del = kDelta, Label lab = 0)
-      : delta(del), subsequential_label(lab) {}
+  explicit DeterminizeFstOptions(float del = kDelta, Label lab = 0,
+                                 F *filt = 0, T *table = 0)
+      : delta(del), subsequential_label(lab), filter(filt),
+        state_table(table) {}
 };
 
-
 // Implementation of delayed DeterminizeFst. This base class is
 // common to the variants that implement acceptor and transducer
 // determinization.
@@ -149,15 +370,15 @@
   typedef typename A::StateId StateId;
   typedef CacheState<A> State;
 
+  template <class D, class F, class T>
   DeterminizeFstImplBase(const Fst<A> &fst,
-                         const DeterminizeFstOptions<A> &opts)
+                         const DeterminizeFstOptions<A, D, F, T> &opts)
       : CacheImpl<A>(opts), fst_(fst.Copy()) {
     SetType("determinize");
-    uint64 props = fst.Properties(kFstProperties, false);
-    SetProperties(DeterminizeProperties(props,
-                                        opts.subsequential_label != 0),
-                  kCopyProperties);
-
+    uint64 iprops = fst.Properties(kFstProperties, false);
+    uint64 dprops = DeterminizeProperties(iprops,
+                                          opts.subsequential_label != 0);
+    SetProperties(F::Properties(dprops), kCopyProperties);
     SetInputSymbols(fst.InputSymbols());
     SetOutputSymbols(fst.OutputSymbols());
   }
@@ -234,7 +455,7 @@
 
 // Implementation of delayed determinization for weighted acceptors.
 // It is templated on the arc type A and the common divisor D.
-template <class A, class D>
+template <class A, class D, class F, class T>
 class DeterminizeFsaImpl : public DeterminizeFstImplBase<A> {
  public:
   using FstImpl<A>::SetProperties;
@@ -244,27 +465,19 @@
   typedef typename A::Label Label;
   typedef typename A::Weight Weight;
   typedef typename A::StateId StateId;
-
-  struct Element {
-    Element() {}
-
-    Element(StateId s, Weight w) : state_id(s), weight(w) {}
-
-    StateId state_id;  // Input state Id
-    Weight weight;     // Residual weight
-  };
+  typedef DeterminizeElement<A> Element;
   typedef slist<Element> Subset;
-  typedef map<Label, Subset*> LabelMap;
+  typedef typename F::LabelMap LabelMap;
 
-  DeterminizeFsaImpl(const Fst<A> &fst, D common_divisor,
+  DeterminizeFsaImpl(const Fst<A> &fst,
                      const vector<Weight> *in_dist, vector<Weight> *out_dist,
-                     const DeterminizeFstOptions<A> &opts)
+                     const DeterminizeFstOptions<A, D, F, T> &opts)
       : DeterminizeFstImplBase<A>(fst, opts),
         delta_(opts.delta),
         in_dist_(in_dist),
         out_dist_(out_dist),
-        common_divisor_(common_divisor),
-        subset_hash_(0, SubsetKey(), SubsetEqual(&elements_)) {
+        filter_(opts.filter ? opts.filter : new F()),
+        state_table_(opts.state_table ? opts.state_table : new T()) {
     if (!fst.Properties(kAcceptor, true)) {
       FSTERROR()  << "DeterminizeFst: argument not an acceptor";
       SetProperties(kError, kError);
@@ -278,13 +491,13 @@
       out_dist_->clear();
   }
 
-  DeterminizeFsaImpl(const DeterminizeFsaImpl<A, D> &impl)
+  DeterminizeFsaImpl(const DeterminizeFsaImpl<A, D, F, T> &impl)
       : DeterminizeFstImplBase<A>(impl),
         delta_(impl.delta_),
         in_dist_(0),
         out_dist_(0),
-        common_divisor_(impl.common_divisor_),
-        subset_hash_(0, SubsetKey(), SubsetEqual(&elements_)) {
+        filter_(new F(*impl.filter_)),
+        state_table_(new T(*impl.state_table_)) {
     if (impl.out_dist_) {
       FSTERROR() << "DeterminizeFsaImpl: cannot copy with out_dist vector";
       SetProperties(kError, kError);
@@ -292,12 +505,12 @@
   }
 
   virtual ~DeterminizeFsaImpl() {
-    for (int i = 0; i < subsets_.size(); ++i)
-      delete subsets_[i];
+    delete filter_;
+    delete state_table_;
   }
 
-  virtual DeterminizeFsaImpl<A, D> *Copy() {
-    return new DeterminizeFsaImpl<A, D>(*this);
+  virtual DeterminizeFsaImpl<A, D, F, T> *Copy() {
+    return new DeterminizeFsaImpl<A, D, F, T>(*this);
   }
 
   uint64 Properties() const { return Properties(kFstProperties); }
@@ -320,12 +533,12 @@
   }
 
   virtual Weight ComputeFinal(StateId s) {
-    Subset *subset = subsets_[s];
+    const Subset *subset = state_table_->FindSubset(s);
     Weight final = Weight::Zero();
-    for (typename Subset::iterator siter = subset->begin();
+    for (typename Subset::const_iterator siter = subset->begin();
          siter != subset->end();
          ++siter) {
-      Element &element = *siter;
+      const Element &element = *siter;
       final = Plus(final, Times(element.weight,
                                 GetFst().Final(element.state_id)));
       if (!final.Member())
@@ -334,33 +547,9 @@
     return final;
   }
 
-  // Finds the state corresponding to a subset. Only creates a new state
-  // if the subset is not found in the subset hash. FindState takes
-  // ownership of the subset argument (so that it doesn't have to copy it
-  // if it creates a new state).
-  //
-  // The method exploits the following device: all pairs stored in the
-  // associative container subset_hash_ are of the form (subset,
-  // id(subset) + 1), i.e. subset_hash_[subset] > 0 if subset has been
-  // stored previously. For unassigned subsets, the call to
-  // subset_hash_[subset] creates a new pair (subset, 0). As a result,
-  // subset_hash_[subset] == 0 iff subset is new.
   StateId FindState(Subset *subset) {
-    StateId &assoc_value = subset_hash_[subset];
-    if (assoc_value == 0) {    // subset wasn't present; create new state
-      StateId s = CreateState(subset);
-      assoc_value = s + 1;
-      return  s;
-    } else {
-      delete subset;
-      return assoc_value - 1;  // NB: assoc_value = ID + 1
-    }
-  }
-
-  StateId CreateState(Subset *subset) {
-    StateId s = subsets_.size();
-    subsets_.push_back(subset);
-    if (in_dist_)
+    StateId s = state_table_->FindState(subset);
+    if (in_dist_ && out_dist_->size() <= s)
       out_dist_->push_back(ComputeDistance(subset));
     return s;
   }
@@ -398,24 +587,35 @@
   // element weights include the input automaton label weights and the
   // subsets may contain duplicate states.
   void LabelSubsets(StateId s, LabelMap *label_map) {
-    Subset *src_subset = subsets_[s];
+    const Subset *src_subset = state_table_->FindSubset(s);
 
-    for (typename Subset::iterator siter = src_subset->begin();
+    for (typename Subset::const_iterator siter = src_subset->begin();
          siter != src_subset->end();
          ++siter) {
-      Element &src_element = *siter;
+      const Element &src_element = *siter;
       for (ArcIterator< Fst<A> > aiter(GetFst(), src_element.state_id);
            !aiter.Done();
            aiter.Next()) {
         const A &arc = aiter.Value();
         Element dest_element(arc.nextstate,
                              Times(src_element.weight, arc.weight));
-        Subset* &dest_subset = (*label_map)[arc.ilabel];
-        if (dest_subset == 0)
+
+        // The LabelMap may be a e.g. multimap with more complex
+        // determinization filters, so we insert efficiently w/o using [].
+        typename LabelMap::iterator liter = label_map->lower_bound(arc.ilabel);
+        Subset* dest_subset;
+        if (liter == label_map->end() || liter->first != arc.ilabel) {
           dest_subset = new Subset;
+          label_map->insert(liter, make_pair(arc.ilabel, dest_subset));
+        } else {
+          dest_subset = liter->second;
+        }
+
         dest_subset->push_front(dest_element);
       }
     }
+    // Applies the determinization filter
+    (*filter_)(s, label_map);
   }
 
   // Adds an arc from state S to the destination state associated
@@ -469,98 +669,17 @@
     CacheImpl<A>::PushArc(s, arc);
   }
 
-  // Comparison object for hashing Subset(s). Subsets are not sorted in this
-  // implementation, so ordering must not be assumed in the equivalence
-  // test.
-  class SubsetEqual {
-   public:
-    // Constructor takes vector needed to check equality. See immediately
-    // below for constraints on it.
-    explicit SubsetEqual(vector<Element *> *elements)
-        : elements_(elements) {}
-
-    // At each call to operator(), the elements_ vector should contain
-    // only NULLs. When this operator returns, elements_ will still
-    // have this property.
-    bool operator()(Subset* subset1, Subset* subset2) const {
-        if (subset1->size() != subset2->size())
-          return false;
-
-      // Loads first subset elements in element vector.
-      for (typename Subset::iterator iter1 = subset1->begin();
-           iter1 != subset1->end();
-           ++iter1) {
-        Element &element1 = *iter1;
-        while (elements_->size() <= element1.state_id)
-          elements_->push_back(0);
-        (*elements_)[element1.state_id] = &element1;
-      }
-
-      // Checks second subset matches first via element vector.
-      for (typename Subset::iterator iter2 = subset2->begin();
-           iter2 != subset2->end();
-           ++iter2) {
-        Element &element2 = *iter2;
-        while (elements_->size() <= element2.state_id)
-          elements_->push_back(0);
-        Element *element1 = (*elements_)[element2.state_id];
-        if (!element1 || element1->weight != element2.weight) {
-          // Mismatch found. Resets element vector before returning false.
-          for (typename Subset::iterator iter1 = subset1->begin();
-               iter1 != subset1->end();
-               ++iter1)
-            (*elements_)[iter1->state_id] = 0;
-          return false;
-        } else {
-          (*elements_)[element2.state_id] = 0;  // Clears entry
-        }
-      }
-      return true;
-    }
-   private:
-    vector<Element *> *elements_;
-  };
-
-  // Hash function for Subset to Fst states. Subset elements are not
-  // sorted in this implementation, so the hash must be invariant
-  // under subset reordering.
-  class SubsetKey {
-   public:
-    size_t operator()(const Subset* subset) const {
-      size_t hash = 0;
-      for (typename Subset::const_iterator iter = subset->begin();
-           iter != subset->end();
-           ++iter) {
-        const Element &element = *iter;
-        int lshift = element.state_id % (CHAR_BIT * sizeof(size_t) - 1) + 1;
-        int rshift = CHAR_BIT * sizeof(size_t) - lshift;
-        size_t n = element.state_id;
-        hash ^= n << lshift ^ n >> rshift ^ element.weight.Hash();
-      }
-      return hash;
-    }
-  };
-
   float delta_;                    // Quantization delta for subset weights
   const vector<Weight> *in_dist_;  // Distance to final NFA states
   vector<Weight> *out_dist_;       // Distance to final DFA states
 
   D common_divisor_;
+  F *filter_;
+  T *state_table_;
 
-  // Used to test equivalence of subsets.
   vector<Element *> elements_;
 
-  // Maps from StateId to Subset.
-  vector<Subset *> subsets_;
-
-  // Hashes from Subset to its StateId in the output automaton.
-  typedef unordered_map<Subset *, StateId, SubsetKey, SubsetEqual>
-  SubsetHash;
-
-  // Hashes from Label to Subsets corr. to destination states of current state.
-  SubsetHash subset_hash_;
-
-  void operator=(const DeterminizeFsaImpl<A, D> &);  // disallow
+  void operator=(const DeterminizeFsaImpl<A, D, F, T> &);  // disallow
 };
 
 
@@ -569,7 +688,7 @@
 // the Gallic semiring as an acceptor whose weights contain the output
 // strings and using acceptor determinization above to determinize
 // that acceptor.
-template <class A, StringType S>
+template <class A, StringType S, class D, class F, class T>
 class DeterminizeFstImpl : public DeterminizeFstImplBase<A> {
  public:
   using FstImpl<A>::SetProperties;
@@ -588,17 +707,18 @@
   typedef ArcMapFst<A, ToArc, ToMapper> ToFst;
   typedef ArcMapFst<ToArc, A, FromMapper> FromFst;
 
-  typedef GallicCommonDivisor<Label, Weight, S> CommonDivisor;
+  typedef GallicCommonDivisor<Label, Weight, S, D> CommonDivisor;
   typedef GallicFactor<Label, Weight, S> FactorIterator;
 
-  DeterminizeFstImpl(const Fst<A> &fst, const DeterminizeFstOptions<A> &opts)
+  DeterminizeFstImpl(const Fst<A> &fst,
+                     const DeterminizeFstOptions<A, D, F, T> &opts)
       : DeterminizeFstImplBase<A>(fst, opts),
         delta_(opts.delta),
         subsequential_label_(opts.subsequential_label) {
      Init(GetFst());
   }
 
-  DeterminizeFstImpl(const DeterminizeFstImpl<A, S> &impl)
+  DeterminizeFstImpl(const DeterminizeFstImpl<A, S, D, F, T> &impl)
       : DeterminizeFstImplBase<A>(impl),
         delta_(impl.delta_),
         subsequential_label_(impl.subsequential_label_) {
@@ -607,8 +727,8 @@
 
   ~DeterminizeFstImpl() { delete from_fst_; }
 
-  virtual DeterminizeFstImpl<A, S> *Copy() {
-    return new DeterminizeFstImpl<A, S>(*this);
+  virtual DeterminizeFstImpl<A, S, D, F, T> *Copy() {
+    return new DeterminizeFstImpl<A, S, D, F, T>(*this);
   }
 
   uint64 Properties() const { return Properties(kFstProperties); }
@@ -642,7 +762,7 @@
   Label subsequential_label_;
   FromFst *from_fst_;
 
-  void operator=(const DeterminizeFstImpl<A, S> &);  // disallow
+  void operator=(const DeterminizeFstImpl<A, S, D, F, T> &);  // disallow
 };
 
 
@@ -673,7 +793,8 @@
  public:
   friend class ArcIterator< DeterminizeFst<A> >;
   friend class StateIterator< DeterminizeFst<A> >;
-  template <class B, StringType S> friend class DeterminizeFstImpl;
+  template <class B, StringType S, class D, class F, class T>
+  friend class DeterminizeFstImpl;
 
   typedef A Arc;
   typedef typename A::Weight Weight;
@@ -684,33 +805,47 @@
 
   using ImplToFst<Impl>::SetImpl;
 
-  explicit DeterminizeFst(
-      const Fst<A> &fst,
-      const DeterminizeFstOptions<A> &opts = DeterminizeFstOptions<A>()) {
+  explicit DeterminizeFst(const Fst<A> &fst) {
+    typedef DefaultCommonDivisor<Weight> D;
+    typedef IdentityDeterminizeFilter<A> F;
+    typedef DefaultDeterminizeStateTable<A> T;
+    DeterminizeFstOptions<A, D, F, T> opts;
     if (fst.Properties(kAcceptor, true)) {
       // Calls implementation for acceptors.
-      typedef DefaultCommonDivisor<Weight> D;
-      SetImpl(new DeterminizeFsaImpl<A, D>(fst, D(), 0, 0, opts));
+      SetImpl(new DeterminizeFsaImpl<A, D, F, T>(fst, 0, 0, opts));
     } else {
       // Calls implementation for transducers.
-      SetImpl(new DeterminizeFstImpl<A, STRING_LEFT_RESTRICT>(fst, opts));
+      SetImpl(new
+              DeterminizeFstImpl<A, STRING_LEFT_RESTRICT, D, F, T>(fst, opts));
+    }
+  }
+
+  template <class D, class F, class T>
+  DeterminizeFst(const Fst<A> &fst,
+                 const DeterminizeFstOptions<A, D, F, T> &opts) {
+    if (fst.Properties(kAcceptor, true)) {
+      // Calls implementation for acceptors.
+      SetImpl(new DeterminizeFsaImpl<A, D, F, T>(fst, 0, 0, opts));
+    } else {
+      // Calls implementation for transducers.
+      SetImpl(new
+              DeterminizeFstImpl<A, STRING_LEFT_RESTRICT, D, F, T>(fst, opts));
     }
   }
 
   // This acceptor-only version additionally computes the distance to
   // final states in the output if provided with those distances for the
   // input. Useful for e.g. unique N-shortest paths.
-  DeterminizeFst(
-      const Fst<A> &fst,
-      const vector<Weight> &in_dist, vector<Weight> *out_dist,
-      const DeterminizeFstOptions<A> &opts = DeterminizeFstOptions<A>()) {
+  template <class D, class F, class T>
+  DeterminizeFst(const Fst<A> &fst,
+                 const vector<Weight> *in_dist, vector<Weight> *out_dist,
+                 const DeterminizeFstOptions<A, D, F, T> &opts) {
     if (!fst.Properties(kAcceptor, true)) {
       FSTERROR() << "DeterminizeFst:"
                  << " distance to final states computed for acceptors only";
       GetImpl()->SetProperties(kError, kError);
     }
-    typedef DefaultCommonDivisor<Weight> D;
-    SetImpl(new DeterminizeFsaImpl<A, D>(fst, D(), &in_dist, out_dist, opts));
+    SetImpl(new DeterminizeFsaImpl<A, D, F, T>(fst, in_dist, out_dist, opts));
   }
 
   // See Fst<>::Copy() for doc.
@@ -733,14 +868,6 @@
   }
 
  private:
-  // This private version is for passing the common divisor to
-  // FSA determinization.
-  template <class D>
-  DeterminizeFst(const Fst<A> &fst, const D &common_div,
-                 const DeterminizeFstOptions<A> &opts)
-      :  ImplToFst<Impl>(
-          new DeterminizeFsaImpl<A, D>(fst, common_div, 0, 0, opts)) {}
-
   // Makes visible to friends.
   Impl *GetImpl() const { return ImplToFst<Impl>::GetImpl(); }
 
@@ -750,17 +877,18 @@
 
 // Initialization of transducer determinization implementation. which
 // is defined after DeterminizeFst since it calls it.
-template <class A, StringType S>
-void DeterminizeFstImpl<A, S>::Init(const Fst<A> &fst) {
+template <class A, StringType S, class D, class F, class T>
+void DeterminizeFstImpl<A, S, D, F, T>::Init(const Fst<A> &fst) {
   // Mapper to an acceptor.
   ToFst to_fst(fst, ToMapper());
 
-  // Determinize acceptor.
+  // Determinizes acceptor.
   // This recursive call terminates since it passes the common divisor
   // to a private constructor.
   CacheOptions copts(GetCacheGc(), GetCacheLimit());
-  DeterminizeFstOptions<ToArc> dopts(copts, delta_);
-  DeterminizeFst<ToArc> det_fsa(to_fst, CommonDivisor(), dopts);
+  DeterminizeFstOptions<ToArc, CommonDivisor> dopts(copts, delta_);
+  // Uses acceptor-only constructor to avoid template recursion
+  DeterminizeFst<ToArc> det_fsa(to_fst, 0, 0, dopts);
 
   // Mapper back to transducer.
   FactorWeightOptions<ToArc> fopts(CacheOptions(true, 0), delta_,
@@ -832,7 +960,7 @@
 
 // Determinizes a weighted transducer.  This version writes the
 // determinized Fst to an output MutableFst.  The result will be an
-// equivalent FSt that has the property that no state has two
+// equivalent FST that has the property that no state has two
 // transitions with the same input label.  For this algorithm, epsilon
 // transitions are treated as regular symbols (cf. RmEpsilon).
 //
@@ -866,7 +994,7 @@
     if (ifst.Properties(kAcceptor, false)) {
       vector<Weight> idistance, odistance;
       ShortestDistance(ifst, &idistance, true);
-      DeterminizeFst<Arc> dfst(ifst, idistance, &odistance, nopts);
+      DeterminizeFst<Arc> dfst(ifst, &idistance, &odistance, nopts);
       PruneOptions< Arc, AnyArcFilter<Arc> > popts(opts.weight_threshold,
                                                    opts.state_threshold,
                                                    AnyArcFilter<Arc>(),
diff --git a/src/include/fst/edit-fst.h b/src/include/fst/edit-fst.h
index 303cb24..bd33b9d 100644
--- a/src/include/fst/edit-fst.h
+++ b/src/include/fst/edit-fst.h
@@ -25,6 +25,10 @@
 
 #include <fst/cache.h>
 
+#include <tr1/unordered_map>
+using std::tr1::unordered_map;
+using std::tr1::unordered_multimap;
+
 namespace fst {
 
 // The EditFst class enables non-destructive edit operations on a wrapped
@@ -431,7 +435,8 @@
   // A copy constructor for this implementation class, used to implement
   // the Copy() method of the Fst interface.
   EditFstImpl(const EditFstImpl &impl)
-      : wrapped_(static_cast<WrappedFstT *>(impl.wrapped_->Copy(true))),
+      : FstImpl<A>(),
+        wrapped_(static_cast<WrappedFstT *>(impl.wrapped_->Copy(true))),
         data_(impl.data_) {
     data_->IncrRefCount();
     SetProperties(impl.Properties());
diff --git a/src/include/fst/epsnormalize.h b/src/include/fst/epsnormalize.h
index 8187737..9d178b1 100644
--- a/src/include/fst/epsnormalize.h
+++ b/src/include/fst/epsnormalize.h
@@ -24,7 +24,6 @@
 #include <tr1/unordered_map>
 using std::tr1::unordered_map;
 using std::tr1::unordered_multimap;
-#include <fst/slist.h>
 
 
 #include <fst/factor-weight.h>
diff --git a/src/include/fst/equivalent.h b/src/include/fst/equivalent.h
index 7f8708a..e28fea1 100644
--- a/src/include/fst/equivalent.h
+++ b/src/include/fst/equivalent.h
@@ -23,6 +23,7 @@
 
 #include <algorithm>
 #include <deque>
+using std::deque;
 #include <tr1/unordered_map>
 using std::tr1::unordered_map;
 using std::tr1::unordered_multimap;
diff --git a/src/include/fst/extensions/far/extract.h b/src/include/fst/extensions/far/extract.h
index d6f92ff..95866de 100644
--- a/src/include/fst/extensions/far/extract.h
+++ b/src/include/fst/extensions/far/extract.h
@@ -32,51 +32,106 @@
 namespace fst {
 
 template<class Arc>
+inline void FarWriteFst(const Fst<Arc>* fst, string key,
+                        string* okey, int* nrep,
+                        const int32 &generate_filenames, int i,
+                        const string &filename_prefix,
+                        const string &filename_suffix) {
+  if (key == *okey)
+    ++*nrep;
+  else
+    *nrep = 0;
+
+  *okey = key;
+
+  string ofilename;
+  if (generate_filenames) {
+    ostringstream tmp;
+    tmp.width(generate_filenames);
+    tmp.fill('0');
+    tmp << i;
+    ofilename = tmp.str();
+  } else {
+    if (*nrep > 0) {
+      ostringstream tmp;
+      tmp << '.' << nrep;
+      key.append(tmp.str().data(), tmp.str().size());
+    }
+    ofilename = key;
+  }
+  fst->Write(filename_prefix + ofilename + filename_suffix);
+}
+
+template<class Arc>
 void FarExtract(const vector<string> &ifilenames,
                 const int32 &generate_filenames,
-                const string &begin_key,
-                const string &end_key,
+                const string &keys,
+                const string &key_separator,
+                const string &range_delimiter,
                 const string &filename_prefix,
                 const string &filename_suffix) {
   FarReader<Arc> *far_reader = FarReader<Arc>::Open(ifilenames);
   if (!far_reader) return;
 
-  if (!begin_key.empty())
-    far_reader->Find(begin_key);
-
   string okey;
   int nrep = 0;
+
+  vector<char *> key_vector;
+  // User has specified a set of fsts to extract, where some of the "fsts" could
+  // be ranges.
+  if (!keys.empty()) {
+    char *keys_cstr = new char[keys.size()+1];
+    strcpy(keys_cstr, keys.c_str());
+    SplitToVector(keys_cstr, key_separator.c_str(), &key_vector, true);
+    int i = 0;
+    for (int k = 0; k < key_vector.size(); ++k, ++i) {
+      string key = string(key_vector[k]);
+      char *key_cstr = new char[key.size()+1];
+      strcpy(key_cstr, key.c_str());
+      vector<char *> range_vector;
+      SplitToVector(key_cstr, range_delimiter.c_str(), &range_vector, false);
+      if (range_vector.size() == 1) {  // Not a range
+        if (!far_reader->Find(key)) {
+          LOG(ERROR) << "FarExtract: Cannot find key: " << key;
+          return;
+        }
+        const Fst<Arc> &fst = far_reader->GetFst();
+        FarWriteFst(&fst, key, &okey, &nrep, generate_filenames, i,
+                    filename_prefix, filename_suffix);
+      } else if (range_vector.size() == 2) {  // A legal range
+        string begin_key = string(range_vector[0]);
+        string end_key = string(range_vector[1]);
+        if (begin_key.empty() || end_key.empty()) {
+          LOG(ERROR) << "FarExtract: Illegal range specification: " << key;
+          return;
+        }
+        if (!far_reader->Find(begin_key)) {
+          LOG(ERROR) << "FarExtract: Cannot find key: " << begin_key;
+          return;
+        }
+        for ( ; !far_reader->Done(); far_reader->Next(), ++i) {
+          string ikey = far_reader->GetKey();
+          if (end_key < ikey) break;
+          const Fst<Arc> &fst = far_reader->GetFst();
+          FarWriteFst(&fst, ikey, &okey, &nrep, generate_filenames, i,
+                      filename_prefix, filename_suffix);
+        }
+      } else {
+        LOG(ERROR) << "FarExtract: Illegal range specification: " << key;
+        return;
+      }
+      delete key_cstr;
+    }
+    delete keys_cstr;
+    return;
+  }
+  // Nothing specified: extract everything.
   for (int i = 1; !far_reader->Done(); far_reader->Next(), ++i) {
     string key = far_reader->GetKey();
-    if (!end_key.empty() && end_key < key)
-      break;
     const Fst<Arc> &fst = far_reader->GetFst();
-
-    if (key == okey)
-      ++nrep;
-    else
-      nrep = 0;
-
-    okey = key;
-
-    string ofilename;
-    if (generate_filenames) {
-      ostringstream tmp;
-      tmp.width(generate_filenames);
-      tmp.fill('0');
-      tmp << i;
-      ofilename = tmp.str();
-    } else {
-      if (nrep > 0) {
-        ostringstream tmp;
-        tmp << '.' << nrep;
-        key.append(tmp.str().data(), tmp.str().size());
-      }
-      ofilename = key;
-    }
-    fst.Write(filename_prefix + ofilename + filename_suffix);
+    FarWriteFst(&fst, key, &okey, &nrep, generate_filenames, i,
+                filename_prefix, filename_suffix);
   }
-
   return;
 }
 
diff --git a/src/include/fst/extensions/far/far.h b/src/include/fst/extensions/far/far.h
index acce76e..737f1b8 100644
--- a/src/include/fst/extensions/far/far.h
+++ b/src/include/fst/extensions/far/far.h
@@ -273,13 +273,10 @@
         return STListFarWriter<A>::Create(filename);
     case FAR_STTABLE:
       return STTableFarWriter<A>::Create(filename);
-      break;
     case FAR_STLIST:
       return STListFarWriter<A>::Create(filename);
-      break;
     case FAR_FST:
       return FstFarWriter<A>::Create(filename);
-      break;
     default:
       LOG(ERROR) << "FarWriter::Create: unknown far type";
       return 0;
diff --git a/src/include/fst/extensions/far/farscript.h b/src/include/fst/extensions/far/farscript.h
index 3a9c145..cfd9167 100644
--- a/src/include/fst/extensions/far/farscript.h
+++ b/src/include/fst/extensions/far/farscript.h
@@ -173,18 +173,22 @@
 
 typedef args::Package<const vector<string> &, int32,
                       const string&, const string&, const string&,
-                      const string&> FarExtractArgs;
+                      const string&, const string&> FarExtractArgs;
 
 template<class Arc>
 void FarExtract(FarExtractArgs *args) {
   fst::FarExtract<Arc>(
-      args->arg1, args->arg2, args->arg3, args->arg4, args->arg5, args->arg6);
+      args->arg1, args->arg2, args->arg3, args->arg4, args->arg5, args->arg6,
+      args->arg7);
 }
 
 void FarExtract(const vector<string> &ifilenames,
                 const string &arc_type,
-                int32 generate_filenames, const string &begin_key,
-                const string &end_key, const string &filename_prefix,
+                int32 generate_filenames,
+                const string &keys,
+                const string &key_separator,
+                const string &range_delimiter,
+                const string &filename_prefix,
                 const string &filename_suffix);
 
 typedef args::Package<const vector<string> &, const string &,
diff --git a/src/include/fst/extensions/far/stlist.h b/src/include/fst/extensions/far/stlist.h
index 1cdc80c..ff3d98b 100644
--- a/src/include/fst/extensions/far/stlist.h
+++ b/src/include/fst/extensions/far/stlist.h
@@ -145,13 +145,13 @@
       ReadType(*streams_[i], &magic_number);
       ReadType(*streams_[i], &file_version);
       if (magic_number != kSTListMagicNumber) {
-        FSTERROR() << "STListReader::STTableReader: wrong file type: "
+        FSTERROR() << "STListReader::STListReader: wrong file type: "
                    << filenames[i];
         error_ = true;
         return;
       }
       if (file_version != kSTListFileVersion) {
-        FSTERROR() << "STListReader::STTableReader: wrong file version: "
+        FSTERROR() << "STListReader::STListReader: wrong file version: "
                    << filenames[i];
         error_ = true;
         return;
@@ -161,7 +161,7 @@
       if (!key.empty())
         heap_.push(make_pair(key, i));
       if (!*streams_[i]) {
-        FSTERROR() << "STTableReader: error reading file: " << sources_[i];
+        FSTERROR() << "STListReader: error reading file: " << sources_[i];
         error_ = true;
         return;
       }
@@ -170,7 +170,7 @@
     size_t current = heap_.top().second;
     entry_ = entry_reader_(*streams_[current]);
     if (!entry_ || !*streams_[current]) {
-      FSTERROR() << "STTableReader: error reading entry for key: "
+      FSTERROR() << "STListReader: error reading entry for key: "
                  << heap_.top().first << ", file: " << sources_[current];
       error_ = true;
     }
@@ -219,7 +219,7 @@
     heap_.pop();
     ReadType(*(streams_[current]), &key);
     if (!*streams_[current]) {
-      FSTERROR() << "STTableReader: error reading file: "
+      FSTERROR() << "STListReader: error reading file: "
                  << sources_[current];
       error_ = true;
       return;
@@ -233,7 +233,7 @@
         delete entry_;
       entry_ = entry_reader_(*streams_[current]);
       if (!entry_ || !*streams_[current]) {
-        FSTERROR() << "STTableReader: error reading entry for key: "
+        FSTERROR() << "STListReader: error reading entry for key: "
                    << heap_.top().first << ", file: " << sources_[current];
         error_ = true;
       }
@@ -267,8 +267,8 @@
 // String-type list header reading function template on the entry header
 // type 'H' having a member function:
 //   Read(istream &strm, const string &filename);
-// Checks that 'filename' is an STTable and call the H::Read() on the last
-// entry in the STTable.
+// Checks that 'filename' is an STList and call the H::Read() on the last
+// entry in the STList.
 // Does not support reading from stdin.
 template <class H>
 bool ReadSTListHeader(const string &filename, H *header) {
@@ -281,18 +281,18 @@
   ReadType(strm, &magic_number);
   ReadType(strm, &file_version);
   if (magic_number != kSTListMagicNumber) {
-    LOG(ERROR) << "ReadSTTableHeader: wrong file type: " << filename;
+    LOG(ERROR) << "ReadSTListHeader: wrong file type: " << filename;
     return false;
   }
   if (file_version != kSTListFileVersion) {
-    LOG(ERROR) << "ReadSTTableHeader: wrong file version: " << filename;
+    LOG(ERROR) << "ReadSTListHeader: wrong file version: " << filename;
     return false;
   }
   string key;
   ReadType(strm, &key);
   header->Read(strm, filename + ":" + key);
   if (!strm) {
-    LOG(ERROR) << "ReadSTTableHeader: error reading file: " << filename;
+    LOG(ERROR) << "ReadSTListHeader: error reading file: " << filename;
     return false;
   }
   return true;
diff --git a/src/include/fst/extensions/ngram/ngram-fst.h b/src/include/fst/extensions/ngram/ngram-fst.h
index eee664a..873ae6a 100644
--- a/src/include/fst/extensions/ngram/ngram-fst.h
+++ b/src/include/fst/extensions/ngram/ngram-fst.h
@@ -26,6 +26,7 @@
 
 #include <fst/compat.h>
 #include <fst/fstlib.h>
+#include <fst/mapped-file.h>
 #include <fst/extensions/ngram/bitmap-index.h>
 
 // NgramFst implements a n-gram language model based upon the LOUDS data
@@ -76,7 +77,7 @@
   typedef typename A::StateId StateId;
   typedef typename A::Weight Weight;
 
-  NGramFstImpl() : data_(0), owned_(false) {
+  NGramFstImpl() : data_region_(0), data_(0), owned_(false) {
     SetType("ngram");
     SetInputSymbols(NULL);
     SetOutputSymbols(NULL);
@@ -89,6 +90,7 @@
     if (owned_) {
       delete [] data_;
     }
+    delete data_region_;
   }
 
   static NGramFstImpl<A>* Read(istream &strm,  // NOLINT
@@ -104,7 +106,8 @@
     strm.read(reinterpret_cast<char *>(&num_futures), sizeof(num_futures));
     strm.read(reinterpret_cast<char *>(&num_final), sizeof(num_final));
     size_t size = Storage(num_states, num_futures, num_final);
-    char* data = new char[size];
+    MappedFile *data_region = MappedFile::Allocate(size);
+    char *data = reinterpret_cast<char *>(data_region->mutable_data());
     // Copy num_states, num_futures and num_final back into data.
     memcpy(data, reinterpret_cast<char *>(&num_states), sizeof(num_states));
     memcpy(data + sizeof(num_states), reinterpret_cast<char *>(&num_futures),
@@ -116,7 +119,7 @@
       delete impl;
       return NULL;
     }
-    impl->Init(data, true /* owned */);
+    impl->Init(data, false, data_region);
     return impl;
   }
 
@@ -126,7 +129,7 @@
     hdr.SetStart(Start());
     hdr.SetNumStates(num_states_);
     WriteHeader(strm, opts, kFileVersion, &hdr);
-    strm.write(data_, Storage(num_states_, num_futures_, num_final_));
+    strm.write(data_, StorageSize());
     return strm;
   }
 
@@ -223,11 +226,23 @@
 
   // Access to the underlying representation
   const char* GetData(size_t* data_size) const {
-    *data_size = Storage(num_states_, num_futures_, num_final_);
+    *data_size = StorageSize();
     return data_;
   }
 
-  void Init(const char* data, bool owned);
+  void Init(const char* data, bool owned, MappedFile *file = 0);
+
+  const vector<Label> &GetContext(StateId s, NGramFstInst<A> *inst) const {
+    SetInstFuture(s, inst);
+    SetInstContext(inst);
+    return inst->context_;
+  }
+
+  size_t StorageSize() const {
+    return Storage(num_states_, num_futures_, num_final_);
+  }
+
+  void GetStates(const vector<Label>& context, vector<StateId> *states) const;
 
  private:
   StateId Transition(const vector<Label> &context, Label future) const;
@@ -242,6 +257,7 @@
   // Minimum file format version supported.
   static const int kMinFileVersion = 4;
 
+  MappedFile *data_region_;
   const char* data_;
   bool owned_;  // True if we own data_
   uint64 num_states_, num_futures_, num_final_;
@@ -261,7 +277,7 @@
 
 template<typename A>
 NGramFstImpl<A>::NGramFstImpl(const Fst<A> &fst, vector<StateId>* order_out)
-    : data_(0), owned_(false) {
+    : data_region_(0), data_(0), owned_(false) {
   typedef A Arc;
   typedef typename Arc::Label Label;
   typedef typename Arc::Weight Weight;
@@ -286,12 +302,16 @@
   // epsilons.
   StateId unigram = fst.Start();
   while (1) {
-    ArcIterator<Fst<A> > aiter(fst, unigram);
-    if (aiter.Done()) {
-      FSTERROR() << "Start state has no arcs";
+    if (unigram == kNoStateId) {
+      FSTERROR() << "Could not identify unigram state.";
       SetProperties(kError, kError);
       return;
     }
+    ArcIterator<Fst<A> > aiter(fst, unigram);
+    if (aiter.Done()) {
+      LOG(WARNING) << "Unigram state " << unigram << " has no arcs.";
+      break;
+    }
     if (aiter.Value().ilabel != 0) break;
     unigram = aiter.Value().nextstate;
   }
@@ -385,7 +405,8 @@
   Weight weight;
   Label label = kNoLabel;
   const size_t storage = Storage(num_states, num_futures, num_final);
-  char* data = new char[storage];
+  MappedFile *data_region = MappedFile::Allocate(storage);
+  char *data = reinterpret_cast<char *>(data_region->mutable_data());
   memset(data, 0, storage);
   size_t offset = 0;
   memcpy(data + offset, reinterpret_cast<char *>(&num_states),
@@ -482,14 +503,17 @@
     return;
   }
 
-  Init(data, true /* owned */);
+  Init(data, false, data_region);
 }
 
 template<typename A>
-inline void NGramFstImpl<A>::Init(const char* data, bool owned) {
+inline void NGramFstImpl<A>::Init(const char* data, bool owned,
+                                  MappedFile *data_region) {
   if (owned_) {
     delete [] data_;
   }
+  delete data_region_;
+  data_region_ = data_region;
   owned_ = owned;
   data_ = data;
   size_t offset = 0;
@@ -507,7 +531,7 @@
   future_ = reinterpret_cast<const uint64*>(data_ + offset);
   offset += BitmapIndex::StorageSize(future_bits) * sizeof(bits);
   final_ = reinterpret_cast<const uint64*>(data_ + offset);
-  offset += BitmapIndex::StorageSize(num_states_ + 1) * sizeof(bits);
+  offset += BitmapIndex::StorageSize(num_states_) * sizeof(bits);
   context_words_ = reinterpret_cast<const Label*>(data_ + offset);
   offset += (num_states_ + 1) * sizeof(*context_words_);
   future_words_ = reinterpret_cast<const Label*>(data_ + offset);
@@ -538,10 +562,10 @@
 template<typename A>
 inline typename A::StateId NGramFstImpl<A>::Transition(
         const vector<Label> &context, Label future) const {
-  size_t num_children = root_num_children_;
   const Label *children = root_children_;
-  const Label *loc = lower_bound(children, children + num_children, future);
-  if (loc == children + num_children || *loc != future) {
+  const Label *loc = lower_bound(children, children + root_num_children_,
+                                 future);
+  if (loc == children + root_num_children_ || *loc != future) {
     return context_index_.Rank1(0);
   }
   size_t node = root_first_child_ + loc - children;
@@ -551,7 +575,6 @@
     return context_index_.Rank1(node);
   }
   size_t last_child = context_index_.Select0(node_rank + 1) - 1;
-  num_children = last_child - first_child + 1;
   for (int word = context.size() - 1; word >= 0; --word) {
     children = context_words_ + context_index_.Rank1(first_child);
     loc = lower_bound(children, children + last_child - first_child + 1,
@@ -569,6 +592,42 @@
   return context_index_.Rank1(node);
 }
 
+template<typename A>
+inline void NGramFstImpl<A>::GetStates(
+    const vector<Label> &context,
+    vector<typename A::StateId>* states) const {
+  states->clear();
+  states->push_back(0);
+  typename vector<Label>::const_reverse_iterator cit = context.rbegin();
+  const Label *children = root_children_;
+  const Label *loc = lower_bound(children, children + root_num_children_, *cit);
+  if (loc == children + root_num_children_ || *loc != *cit) return;
+  size_t node = root_first_child_ + loc - children;
+  states->push_back(context_index_.Rank1(node));
+  if (context.size() == 1) return;
+  size_t node_rank = context_index_.Rank1(node);
+  size_t first_child = context_index_.Select0(node_rank) + 1;
+  ++cit;
+  if (context_index_.Get(first_child) != false) {
+    size_t last_child = context_index_.Select0(node_rank + 1) - 1;
+    while (cit != context.rend()) {
+      children = context_words_ + context_index_.Rank1(first_child);
+      loc = lower_bound(children, children + last_child - first_child + 1,
+                        *cit);
+      if (loc == children + last_child - first_child + 1 || *loc != *cit) {
+        break;
+      }
+      ++cit;
+      node = first_child + loc - children;
+      states->push_back(context_index_.Rank1(node));
+      node_rank = context_index_.Rank1(node);
+      first_child = context_index_.Select0(node_rank) + 1;
+      if (context_index_.Get(first_child) == false) break;
+      last_child = context_index_.Select0(node_rank + 1) - 1;
+    }
+  }
+}
+
 /*****************************************************************************/
 template<class A>
 class NGramFst : public ImplToExpandedFst<NGramFstImpl<A> > {
@@ -597,7 +656,7 @@
 
   // Non-standard constructor to initialize NGramFst directly from data.
   NGramFst(const char* data, bool owned) : ImplToExpandedFst<Impl>(new Impl()) {
-    GetImpl()->Init(data, owned);
+    GetImpl()->Init(data, owned, NULL);
   }
 
   // Get method that gets the data associated with Init().
@@ -605,6 +664,16 @@
     return GetImpl()->GetData(data_size);
   }
 
+  const vector<Label> GetContext(StateId s) const {
+    return GetImpl()->GetContext(s, &inst_);
+  }
+
+  // Consumes as much as possible of context from right to left, returns the
+  // the states corresponding to the increasingly conditioned input sequence.
+  void GetStates(const vector<Label>& context, vector<StateId> *state) const {
+    return GetImpl()->GetStates(context, state);
+  }
+
   virtual size_t NumArcs(StateId s) const {
     return GetImpl()->NumArcs(s, &inst_);
   }
@@ -650,6 +719,10 @@
     return new NGramFstMatcher<A>(*this, match_type);
   }
 
+  size_t StorageSize() const {
+    return GetImpl()->StorageSize();
+  }
+
  private:
   explicit NGramFst(Impl* impl) : ImplToExpandedFst<Impl>(impl) {}
 
diff --git a/src/include/fst/extensions/pdt/compose.h b/src/include/fst/extensions/pdt/compose.h
index 364d76f..c856c6d 100644
--- a/src/include/fst/extensions/pdt/compose.h
+++ b/src/include/fst/extensions/pdt/compose.h
@@ -21,82 +21,469 @@
 #ifndef FST_EXTENSIONS_PDT_COMPOSE_H__
 #define FST_EXTENSIONS_PDT_COMPOSE_H__
 
+#include <list>
+
+#include <fst/extensions/pdt/pdt.h>
 #include <fst/compose.h>
 
 namespace fst {
 
+// Return paren arcs for Find(kNoLabel).
+const uint32 kParenList =  0x00000001;
+
+// Return a kNolabel loop for Find(paren).
+const uint32 kParenLoop =  0x00000002;
+
+// This class is a matcher that treats parens as multi-epsilon labels.
+// It is most efficient if the parens are in a range non-overlapping with
+// the non-paren labels.
+template <class F>
+class ParenMatcher {
+ public:
+  typedef SortedMatcher<F> M;
+  typedef typename M::FST FST;
+  typedef typename M::Arc Arc;
+  typedef typename Arc::StateId StateId;
+  typedef typename Arc::Label Label;
+  typedef typename Arc::Weight Weight;
+
+  ParenMatcher(const FST &fst, MatchType match_type,
+               uint32 flags = (kParenLoop | kParenList))
+      : matcher_(fst, match_type),
+        match_type_(match_type),
+        flags_(flags) {
+    if (match_type == MATCH_INPUT) {
+      loop_.ilabel = kNoLabel;
+      loop_.olabel = 0;
+    } else {
+      loop_.ilabel = 0;
+      loop_.olabel = kNoLabel;
+    }
+    loop_.weight = Weight::One();
+    loop_.nextstate = kNoStateId;
+  }
+
+  ParenMatcher(const ParenMatcher<F> &matcher, bool safe = false)
+      : matcher_(matcher.matcher_, safe),
+        match_type_(matcher.match_type_),
+        flags_(matcher.flags_),
+        open_parens_(matcher.open_parens_),
+        close_parens_(matcher.close_parens_),
+        loop_(matcher.loop_) {
+    loop_.nextstate = kNoStateId;
+  }
+
+  ParenMatcher<F> *Copy(bool safe = false) const {
+    return new ParenMatcher<F>(*this, safe);
+  }
+
+  MatchType Type(bool test) const { return matcher_.Type(test); }
+
+  void SetState(StateId s) {
+    matcher_.SetState(s);
+    loop_.nextstate = s;
+  }
+
+  bool Find(Label match_label);
+
+  bool Done() const {
+    return done_;
+  }
+
+  const Arc& Value() const {
+    return paren_loop_ ? loop_ : matcher_.Value();
+  }
+
+  void Next();
+
+  const FST &GetFst() const { return matcher_.GetFst(); }
+
+  uint64 Properties(uint64 props) const { return matcher_.Properties(props); }
+
+  uint32 Flags() const { return matcher_.Flags(); }
+
+  void AddOpenParen(Label label) {
+    if (label == 0) {
+      FSTERROR() << "ParenMatcher: Bad open paren label: 0";
+    } else {
+      open_parens_.Insert(label);
+    }
+  }
+
+  void AddCloseParen(Label label) {
+    if (label == 0) {
+      FSTERROR() << "ParenMatcher: Bad close paren label: 0";
+    } else {
+      close_parens_.Insert(label);
+    }
+  }
+
+  void RemoveOpenParen(Label label) {
+    if (label == 0) {
+      FSTERROR() << "ParenMatcher: Bad open paren label: 0";
+    } else {
+      open_parens_.Erase(label);
+    }
+  }
+
+  void RemoveCloseParen(Label label) {
+    if (label == 0) {
+      FSTERROR() << "ParenMatcher: Bad close paren label: 0";
+    } else {
+      close_parens_.Erase(label);
+    }
+  }
+
+  void ClearOpenParens() {
+    open_parens_.Clear();
+  }
+
+  void ClearCloseParens() {
+    close_parens_.Clear();
+  }
+
+  bool IsOpenParen(Label label) const {
+    return open_parens_.Member(label);
+  }
+
+  bool IsCloseParen(Label label) const {
+    return close_parens_.Member(label);
+  }
+
+ private:
+  // Advances matcher to next open paren if it exists, returning true.
+  // O.w. returns false.
+  bool NextOpenParen();
+
+  // Advances matcher to next open paren if it exists, returning true.
+  // O.w. returns false.
+  bool NextCloseParen();
+
+  M matcher_;
+  MatchType match_type_;          // Type of match to perform
+  uint32 flags_;
+
+  // open paren label set
+  CompactSet<Label, kNoLabel> open_parens_;
+
+  // close paren label set
+  CompactSet<Label, kNoLabel> close_parens_;
+
+
+  bool open_paren_list_;         // Matching open paren list
+  bool close_paren_list_;        // Matching close paren list
+  bool paren_loop_;              // Current arc is the implicit paren loop
+  mutable Arc loop_;             // For non-consuming symbols
+  bool done_;                    // Matching done
+
+  void operator=(const ParenMatcher<F> &);  // Disallow
+};
+
+template <class M> inline
+bool ParenMatcher<M>::Find(Label match_label) {
+  open_paren_list_ = false;
+  close_paren_list_ = false;
+  paren_loop_ = false;
+  done_ = false;
+
+  // Returns all parenthesis arcs
+  if (match_label == kNoLabel && (flags_ & kParenList)) {
+    if (open_parens_.LowerBound() != kNoLabel) {
+      matcher_.LowerBound(open_parens_.LowerBound());
+      open_paren_list_ = NextOpenParen();
+      if (open_paren_list_) return true;
+    }
+    if (close_parens_.LowerBound() != kNoLabel) {
+      matcher_.LowerBound(close_parens_.LowerBound());
+      close_paren_list_ = NextCloseParen();
+      if (close_paren_list_) return true;
+    }
+  }
+
+  // Returns 'implicit' paren loop
+  if (match_label > 0 && (flags_ & kParenLoop) &&
+      (IsOpenParen(match_label) || IsCloseParen(match_label))) {
+    paren_loop_ = true;
+    return true;
+  }
+
+  // Returns all other labels
+  if (matcher_.Find(match_label))
+    return true;
+
+  done_ = true;
+  return false;
+}
+
+template <class F> inline
+void ParenMatcher<F>::Next() {
+  if (paren_loop_) {
+    paren_loop_ = false;
+    done_ = true;
+  } else if (open_paren_list_) {
+    matcher_.Next();
+    open_paren_list_ = NextOpenParen();
+    if (open_paren_list_) return;
+
+    if (close_parens_.LowerBound() != kNoLabel) {
+      matcher_.LowerBound(close_parens_.LowerBound());
+      close_paren_list_ = NextCloseParen();
+      if (close_paren_list_) return;
+    }
+    done_ = !matcher_.Find(kNoLabel);
+  } else if (close_paren_list_) {
+    matcher_.Next();
+    close_paren_list_ = NextCloseParen();
+    if (close_paren_list_) return;
+    done_ = !matcher_.Find(kNoLabel);
+  } else {
+    matcher_.Next();
+    done_ = matcher_.Done();
+  }
+}
+
+// Advances matcher to next open paren if it exists, returning true.
+// O.w. returns false.
+template <class F> inline
+bool ParenMatcher<F>::NextOpenParen() {
+  for (; !matcher_.Done(); matcher_.Next()) {
+    Label label = match_type_ == MATCH_INPUT ?
+        matcher_.Value().ilabel : matcher_.Value().olabel;
+    if (label > open_parens_.UpperBound())
+      return false;
+    if (IsOpenParen(label))
+      return true;
+  }
+  return false;
+}
+
+// Advances matcher to next close paren if it exists, returning true.
+// O.w. returns false.
+template <class F> inline
+bool ParenMatcher<F>::NextCloseParen() {
+  for (; !matcher_.Done(); matcher_.Next()) {
+    Label label = match_type_ == MATCH_INPUT ?
+        matcher_.Value().ilabel : matcher_.Value().olabel;
+    if (label > close_parens_.UpperBound())
+      return false;
+    if (IsCloseParen(label))
+      return true;
+  }
+  return false;
+}
+
+
+template <class F>
+class ParenFilter {
+ public:
+  typedef typename F::FST1 FST1;
+  typedef typename F::FST2 FST2;
+  typedef typename F::Arc Arc;
+  typedef typename Arc::StateId StateId;
+  typedef typename Arc::Label Label;
+  typedef typename Arc::Weight Weight;
+  typedef typename F::Matcher1 Matcher1;
+  typedef typename F::Matcher2 Matcher2;
+  typedef typename F::FilterState FilterState1;
+  typedef StateId StackId;
+  typedef PdtStack<StackId, Label> ParenStack;
+  typedef IntegerFilterState<StackId> FilterState2;
+  typedef PairFilterState<FilterState1, FilterState2> FilterState;
+  typedef ParenFilter<F> Filter;
+
+  ParenFilter(const FST1 &fst1, const FST2 &fst2,
+              Matcher1 *matcher1 = 0,  Matcher2 *matcher2 = 0,
+              const vector<pair<Label, Label> > *parens = 0,
+              bool expand = false, bool keep_parens = true)
+      : filter_(fst1, fst2, matcher1, matcher2),
+        parens_(parens ? *parens : vector<pair<Label, Label> >()),
+        expand_(expand),
+        keep_parens_(keep_parens),
+        f_(FilterState::NoState()),
+        stack_(parens_),
+        paren_id_(-1) {
+    if (parens) {
+      for (size_t i = 0; i < parens->size(); ++i) {
+        const pair<Label, Label>  &p = (*parens)[i];
+        parens_.push_back(p);
+        GetMatcher1()->AddOpenParen(p.first);
+        GetMatcher2()->AddOpenParen(p.first);
+        if (!expand_) {
+          GetMatcher1()->AddCloseParen(p.second);
+          GetMatcher2()->AddCloseParen(p.second);
+        }
+      }
+    }
+  }
+
+  ParenFilter(const Filter &filter, bool safe = false)
+      : filter_(filter.filter_, safe),
+        parens_(filter.parens_),
+        expand_(filter.expand_),
+        keep_parens_(filter.keep_parens_),
+        f_(FilterState::NoState()),
+        stack_(filter.parens_),
+        paren_id_(-1) { }
+
+  FilterState Start() const {
+    return FilterState(filter_.Start(), FilterState2(0));
+  }
+
+  void SetState(StateId s1, StateId s2, const FilterState &f) {
+    f_ = f;
+    filter_.SetState(s1, s2, f_.GetState1());
+    if (!expand_)
+      return;
+
+    ssize_t paren_id = stack_.Top(f.GetState2().GetState());
+    if (paren_id != paren_id_) {
+      if (paren_id_ != -1) {
+        GetMatcher1()->RemoveCloseParen(parens_[paren_id_].second);
+        GetMatcher2()->RemoveCloseParen(parens_[paren_id_].second);
+      }
+      paren_id_ = paren_id;
+      if (paren_id_ != -1) {
+        GetMatcher1()->AddCloseParen(parens_[paren_id_].second);
+        GetMatcher2()->AddCloseParen(parens_[paren_id_].second);
+      }
+    }
+  }
+
+  FilterState FilterArc(Arc *arc1, Arc *arc2) const {
+    FilterState1 f1 = filter_.FilterArc(arc1, arc2);
+    const FilterState2 &f2 = f_.GetState2();
+    if (f1 == FilterState1::NoState())
+      return FilterState::NoState();
+
+    if (arc1->olabel == kNoLabel && arc2->ilabel) {         // arc2 parentheses
+      if (keep_parens_) {
+        arc1->ilabel = arc2->ilabel;
+      } else if (arc2->ilabel) {
+        arc2->olabel = arc1->ilabel;
+      }
+      return FilterParen(arc2->ilabel, f1, f2);
+    } else if (arc2->ilabel == kNoLabel && arc1->olabel) {  // arc1 parentheses
+      if (keep_parens_) {
+        arc2->olabel = arc1->olabel;
+      } else {
+        arc1->ilabel = arc2->olabel;
+      }
+      return FilterParen(arc1->olabel, f1, f2);
+    } else {
+      return FilterState(f1, f2);
+    }
+  }
+
+  void FilterFinal(Weight *w1, Weight *w2) const {
+    if (f_.GetState2().GetState() != 0)
+      *w1 = Weight::Zero();
+    filter_.FilterFinal(w1, w2);
+  }
+
+  // Return resp matchers. Ownership stays with filter.
+  Matcher1 *GetMatcher1() { return filter_.GetMatcher1(); }
+  Matcher2 *GetMatcher2() { return filter_.GetMatcher2(); }
+
+  uint64 Properties(uint64 iprops) const {
+    uint64 oprops = filter_.Properties(iprops);
+    return oprops & kILabelInvariantProperties & kOLabelInvariantProperties;
+  }
+
+ private:
+  const FilterState FilterParen(Label label, const FilterState1 &f1,
+                                const FilterState2 &f2) const {
+    if (!expand_)
+      return FilterState(f1, f2);
+
+    StackId stack_id = stack_.Find(f2.GetState(), label);
+    if (stack_id < 0) {
+      return FilterState::NoState();
+    } else {
+      return FilterState(f1, FilterState2(stack_id));
+    }
+  }
+
+  F filter_;
+  vector<pair<Label, Label> > parens_;
+  bool expand_;                    // Expands to FST
+  bool keep_parens_;               // Retains parentheses in output
+  FilterState f_;                  // Current filter state
+  mutable ParenStack stack_;
+  ssize_t paren_id_;
+};
+
 // Class to setup composition options for PDT composition.
 // Default is for the PDT as the first composition argument.
 template <class Arc, bool left_pdt = true>
-class PdtComposeOptions : public
+class PdtComposeFstOptions : public
 ComposeFstOptions<Arc,
-                  MultiEpsMatcher< Matcher<Fst<Arc> > >,
-                  MultiEpsFilter<AltSequenceComposeFilter<
-                                   MultiEpsMatcher<
-                                     Matcher<Fst<Arc> > > > > > {
+                  ParenMatcher< Fst<Arc> >,
+                  ParenFilter<AltSequenceComposeFilter<
+                                ParenMatcher< Fst<Arc> > > > > {
  public:
   typedef typename Arc::Label Label;
-  typedef MultiEpsMatcher< Matcher<Fst<Arc> > > PdtMatcher;
-  typedef MultiEpsFilter<AltSequenceComposeFilter<PdtMatcher> > PdtFilter;
+  typedef ParenMatcher< Fst<Arc> > PdtMatcher;
+  typedef ParenFilter<AltSequenceComposeFilter<PdtMatcher> > PdtFilter;
   typedef ComposeFstOptions<Arc, PdtMatcher, PdtFilter> COptions;
   using COptions::matcher1;
   using COptions::matcher2;
   using COptions::filter;
 
-  PdtComposeOptions(const Fst<Arc> &ifst1,
+  PdtComposeFstOptions(const Fst<Arc> &ifst1,
                     const vector<pair<Label, Label> > &parens,
-                    const Fst<Arc> &ifst2) {
-    matcher1 = new PdtMatcher(ifst1, MATCH_OUTPUT, kMultiEpsList);
-    matcher2 = new PdtMatcher(ifst2, MATCH_INPUT, kMultiEpsLoop);
+                       const Fst<Arc> &ifst2, bool expand = false,
+                       bool keep_parens = true) {
+    matcher1 = new PdtMatcher(ifst1, MATCH_OUTPUT, kParenList);
+    matcher2 = new PdtMatcher(ifst2, MATCH_INPUT, kParenLoop);
 
-    // Treat parens as multi-epsilons when composing.
-    for (size_t i = 0; i < parens.size(); ++i) {
-      matcher1->AddMultiEpsLabel(parens[i].first);
-      matcher1->AddMultiEpsLabel(parens[i].second);
-      matcher2->AddMultiEpsLabel(parens[i].first);
-      matcher2->AddMultiEpsLabel(parens[i].second);
-    }
-
-    filter = new PdtFilter(ifst1, ifst2, matcher1, matcher2, true);
+    filter = new PdtFilter(ifst1, ifst2, matcher1, matcher2, &parens,
+                           expand, keep_parens);
   }
 };
 
 // Class to setup composition options for PDT with FST composition.
 // Specialization is for the FST as the first composition argument.
 template <class Arc>
-class PdtComposeOptions<Arc, false> : public
+class PdtComposeFstOptions<Arc, false> : public
 ComposeFstOptions<Arc,
-                  MultiEpsMatcher< Matcher<Fst<Arc> > >,
-                  MultiEpsFilter<SequenceComposeFilter<
-                                   MultiEpsMatcher<
-                                     Matcher<Fst<Arc> > > > > > {
+                  ParenMatcher< Fst<Arc> >,
+                  ParenFilter<SequenceComposeFilter<
+                                ParenMatcher< Fst<Arc> > > > > {
  public:
   typedef typename Arc::Label Label;
-  typedef MultiEpsMatcher< Matcher<Fst<Arc> > > PdtMatcher;
-  typedef MultiEpsFilter<SequenceComposeFilter<PdtMatcher> > PdtFilter;
+  typedef ParenMatcher< Fst<Arc> > PdtMatcher;
+  typedef ParenFilter<SequenceComposeFilter<PdtMatcher> > PdtFilter;
   typedef ComposeFstOptions<Arc, PdtMatcher, PdtFilter> COptions;
   using COptions::matcher1;
   using COptions::matcher2;
   using COptions::filter;
 
-  PdtComposeOptions(const Fst<Arc> &ifst1,
-                    const Fst<Arc> &ifst2,
-                    const vector<pair<Label, Label> > &parens) {
-    matcher1 = new PdtMatcher(ifst1, MATCH_OUTPUT, kMultiEpsLoop);
-    matcher2 = new PdtMatcher(ifst2, MATCH_INPUT, kMultiEpsList);
+  PdtComposeFstOptions(const Fst<Arc> &ifst1,
+                       const Fst<Arc> &ifst2,
+                       const vector<pair<Label, Label> > &parens,
+                       bool expand = false, bool keep_parens = true) {
+    matcher1 = new PdtMatcher(ifst1, MATCH_OUTPUT, kParenLoop);
+    matcher2 = new PdtMatcher(ifst2, MATCH_INPUT, kParenList);
 
-    // Treat parens as multi-epsilons when composing.
-    for (size_t i = 0; i < parens.size(); ++i) {
-      matcher1->AddMultiEpsLabel(parens[i].first);
-      matcher1->AddMultiEpsLabel(parens[i].second);
-      matcher2->AddMultiEpsLabel(parens[i].first);
-      matcher2->AddMultiEpsLabel(parens[i].second);
-    }
-
-    filter = new PdtFilter(ifst1, ifst2, matcher1, matcher2, true);
+    filter = new PdtFilter(ifst1, ifst2, matcher1, matcher2, &parens,
+                           expand, keep_parens);
   }
 };
 
+enum PdtComposeFilter {
+  PAREN_FILTER,          // Bar-Hillel construction; keeps parentheses
+  EXPAND_FILTER,         // Bar-Hillel + expansion; removes parentheses
+  EXPAND_PAREN_FILTER,   // Bar-Hillel + expansion; keeps parentheses
+};
+
+struct PdtComposeOptions {
+  bool connect;  // Connect output
+  PdtComposeFilter filter_type;  // Which pre-defined filter to use
+
+  explicit PdtComposeOptions(bool c, PdtComposeFilter ft = PAREN_FILTER)
+      : connect(c), filter_type(ft) {}
+  PdtComposeOptions() : connect(true), filter_type(PAREN_FILTER) {}
+};
 
 // Composes pushdown transducer (PDT) encoded as an FST (1st arg) and
 // an FST (2nd arg) with the result also a PDT encoded as an Fst. (3rd arg).
@@ -110,16 +497,17 @@
                                typename Arc::Label> > &parens,
              const Fst<Arc> &ifst2,
              MutableFst<Arc> *ofst,
-             const ComposeOptions &opts = ComposeOptions()) {
-
-  PdtComposeOptions<Arc, true> copts(ifst1, parens, ifst2);
+             const PdtComposeOptions &opts = PdtComposeOptions()) {
+  bool expand = opts.filter_type != PAREN_FILTER;
+  bool keep_parens = opts.filter_type != EXPAND_FILTER;
+  PdtComposeFstOptions<Arc, true> copts(ifst1, parens, ifst2,
+                                        expand, keep_parens);
   copts.gc_limit = 0;
   *ofst = ComposeFst<Arc>(ifst1, ifst2, copts);
   if (opts.connect)
     Connect(ofst);
 }
 
-
 // Composes an FST (1st arg) and pushdown transducer (PDT) encoded as
 // an FST (2nd arg) with the result also a PDT encoded as an Fst (3rd arg).
 // In the PDTs, some transitions are labeled with open or close
@@ -132,9 +520,11 @@
              const vector<pair<typename Arc::Label,
                                typename Arc::Label> > &parens,
              MutableFst<Arc> *ofst,
-             const ComposeOptions &opts = ComposeOptions()) {
-
-  PdtComposeOptions<Arc, false> copts(ifst1, ifst2, parens);
+             const PdtComposeOptions &opts = PdtComposeOptions()) {
+  bool expand = opts.filter_type != PAREN_FILTER;
+  bool keep_parens = opts.filter_type != EXPAND_FILTER;
+  PdtComposeFstOptions<Arc, false> copts(ifst1, ifst2, parens,
+                                         expand, keep_parens);
   copts.gc_limit = 0;
   *ofst = ComposeFst<Arc>(ifst1, ifst2, copts);
   if (opts.connect)
diff --git a/src/include/fst/extensions/pdt/pdt.h b/src/include/fst/extensions/pdt/pdt.h
index 6649f55..c56afbd 100644
--- a/src/include/fst/extensions/pdt/pdt.h
+++ b/src/include/fst/extensions/pdt/pdt.h
@@ -27,6 +27,7 @@
 #include <map>
 #include <set>
 
+#include <fst/compat.h>
 #include <fst/state-table.h>
 #include <fst/fst.h>
 
diff --git a/src/include/fst/extensions/pdt/pdtscript.h b/src/include/fst/extensions/pdt/pdtscript.h
index c2a1cf4..84bb27e 100644
--- a/src/include/fst/extensions/pdt/pdtscript.h
+++ b/src/include/fst/extensions/pdt/pdtscript.h
@@ -48,7 +48,7 @@
                       const FstClass &,
                       const vector<pair<int64, int64> >&,
                       MutableFstClass *,
-                      const ComposeOptions &,
+                      const PdtComposeOptions &,
                       bool> PdtComposeArgs;
 
 template<class Arc>
@@ -76,7 +76,7 @@
                 const FstClass & ifst2,
                 const vector<pair<int64, int64> > &parens,
                 MutableFstClass *ofst,
-                const ComposeOptions &copts,
+                const PdtComposeOptions &copts,
                 bool left_pdt);
 
 // PDT EXPAND
diff --git a/src/include/fst/extensions/pdt/replace.h b/src/include/fst/extensions/pdt/replace.h
index a85d0fe..9081400 100644
--- a/src/include/fst/extensions/pdt/replace.h
+++ b/src/include/fst/extensions/pdt/replace.h
@@ -21,6 +21,10 @@
 #ifndef FST_EXTENSIONS_PDT_REPLACE_H__
 #define FST_EXTENSIONS_PDT_REPLACE_H__
 
+#include <tr1/unordered_map>
+using std::tr1::unordered_map;
+using std::tr1::unordered_multimap;
+
 #include <fst/replace.h>
 
 namespace fst {
@@ -62,11 +66,14 @@
     label2id[ifst_array[i].first] = i;
 
   Label max_label = kNoLabel;
+  size_t max_non_term_count = 0;
 
-  deque<size_t> non_term_queue;  // Queue of non-terminals to replace
-  unordered_set<Label> non_term_set;  // Set of non-terminals to replace
+  // Queue of non-terminals to replace
+  deque<size_t> non_term_queue;
+  // Map of non-terminals to replace to count
+  unordered_map<Label, size_t> non_term_map;
   non_term_queue.push_back(root);
-  non_term_set.insert(root);
+  non_term_map[root] = 1;;
 
   // PDT state corr. to ith replace FST start state.
   vector<StateId> fst_start(ifst_array.size(), kNoLabel);
@@ -107,10 +114,11 @@
           size_t nfst_id = it->second;
           if (ifst_array[nfst_id].second->Start() == -1)
             continue;
-          if (non_term_set.count(arc.olabel) == 0) {
+          size_t count = non_term_map[arc.olabel]++;
+          if (count == 0)
             non_term_queue.push_back(arc.olabel);
-            non_term_set.insert(arc.olabel);
-          }
+          if (count > max_non_term_count)
+            max_non_term_count = count;
         }
         arc.nextstate += soff;
         ofst->AddArc(os, arc);
@@ -134,7 +142,8 @@
   // # of parenthesis pairs per fst.
   vector<size_t> nparens(ifst_array.size(), 0);
   // Initial open parenthesis label
-  Label first_paren = max_label + 1;
+  Label first_open_paren = max_label + 1;
+  Label first_close_paren = max_label + max_non_term_count + 1;
 
   for (StateIterator< Fst<Arc> > siter(*ofst);
        !siter.Done(); siter.Next()) {
@@ -158,8 +167,8 @@
           close_paren = (*parens)[paren_id].second;
         } else {
           size_t paren_id = nparens[nfst_id]++;
-          open_paren = first_paren + 2 * paren_id;
-          close_paren = open_paren + 1;
+          open_paren = first_open_paren + paren_id;
+          close_paren = first_close_paren + paren_id;
           paren_map[paren_key] = paren_id;
           if (paren_id >= parens->size())
             parens->push_back(make_pair(open_paren, close_paren));
diff --git a/src/include/fst/factor-weight.h b/src/include/fst/factor-weight.h
index 97440e1..685155c 100644
--- a/src/include/fst/factor-weight.h
+++ b/src/include/fst/factor-weight.h
@@ -25,7 +25,6 @@
 #include <tr1/unordered_map>
 using std::tr1::unordered_map;
 using std::tr1::unordered_multimap;
-#include <fst/slist.h>
 #include <string>
 #include <utility>
 using std::pair; using std::make_pair;
diff --git a/src/include/fst/fst-decl.h b/src/include/fst/fst-decl.h
index 0e2cdf1..f27ded8 100644
--- a/src/include/fst/fst-decl.h
+++ b/src/include/fst/fst-decl.h
@@ -56,7 +56,6 @@
 template <class A> class ComposeFst;
 template <class A> class ConcatFst;
 template <class A> class DeterminizeFst;
-template <class A> class DeterminizeFst;
 template <class A> class DifferenceFst;
 template <class A> class IntersectFst;
 template <class A> class InvertFst;
diff --git a/src/include/fst/fst.h b/src/include/fst/fst.h
index dd11e4f..150fc4e 100644
--- a/src/include/fst/fst.h
+++ b/src/include/fst/fst.h
@@ -53,6 +53,11 @@
 template <class A> class MatcherBase;
 
 struct FstReadOptions {
+  // FileReadMode(s) are advisory, there are many conditions than prevent a
+  // file from being mapped, READ mode will be selected in these cases with
+  // a warning indicating why it was chosen.
+  enum FileReadMode { READ, MAP };
+
   string source;                // Where you're reading from
   const FstHeader *header;      // Pointer to Fst header. If non-zero, use
                                 // this info (don't read a stream header)
@@ -60,19 +65,20 @@
                                 // this info (read and skip stream isymbols)
   const SymbolTable* osymbols;  // Pointer to output symbols. If non-zero, use
                                 // this info (read and skip stream osymbols)
+  FileReadMode mode;            // Read or map files (advisory, if possible)
 
-  explicit FstReadOptions(const string& src = "<unspecfied>",
+  explicit FstReadOptions(const string& src = "<unspecified>",
                           const FstHeader *hdr = 0,
                           const SymbolTable* isym = 0,
-                          const SymbolTable* osym = 0)
-      : source(src), header(hdr), isymbols(isym), osymbols(osym) {}
+                          const SymbolTable* osym = 0);
 
   explicit FstReadOptions(const string& src,
                           const SymbolTable* isym,
-                          const SymbolTable* osym = 0)
-      : source(src), header(0), isymbols(isym), osymbols(osym) {}
-};
+                          const SymbolTable* osym = 0);
 
+  // Helper function to convert strings FileReadModes into their enum value.
+  static FileReadMode ReadMode(const string &mode);
+};
 
 struct FstWriteOptions {
   string source;                 // Where you're writing to
diff --git a/src/include/fst/interval-set.h b/src/include/fst/interval-set.h
index cf6ac54..c4362f2 100644
--- a/src/include/fst/interval-set.h
+++ b/src/include/fst/interval-set.h
@@ -81,12 +81,12 @@
 
   const vector<Interval> *Intervals() const { return &intervals_; }
 
-  const bool Empty() const { return intervals_.empty(); }
+  bool Empty() const { return intervals_.empty(); }
 
-  const T Size() const { return intervals_.size(); }
+  T Size() const { return intervals_.size(); }
 
   // Number of points in the intervals (undefined if not normalized).
-  const T Count() const { return count_; }
+  T Count() const { return count_; }
 
   void Clear() {
     intervals_.clear();
diff --git a/src/include/fst/mapped-file.h b/src/include/fst/mapped-file.h
new file mode 100644
index 0000000..d61bc14
--- /dev/null
+++ b/src/include/fst/mapped-file.h
@@ -0,0 +1,83 @@
+
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// Copyright 2005-2010 Google, Inc.
+// Author: sorenj@google.com (Jeffrey Sorensen)
+
+#ifndef FST_LIB_MAPPED_FILE_H_
+#define FST_LIB_MAPPED_FILE_H_
+
+#include <unistd.h>
+#include <sys/mman.h>
+
+#include <fst/fst.h>
+#include <iostream>
+#include <fstream>
+#include <sstream>
+
+DECLARE_int32(fst_arch_alignment);  // defined in mapped-file.h
+
+namespace fst {
+
+// A memory region is a simple abstraction for allocated memory or data from
+// mmap'ed files.  If mmap equals NULL, then data represents an owned region of
+// size bytes.  Otherwise, mmap and size refer to the mapping and data is a
+// casted pointer to a region contained within [mmap, mmap + size).
+// If size is 0, then mmap refers and data refer to a block of memory managed
+// externally by some other allocator.
+struct MemoryRegion {
+  void *data;
+  void *mmap;
+  size_t size;
+};
+
+class MappedFile {
+ public:
+  virtual ~MappedFile();
+
+  void* mutable_data() const {
+    return reinterpret_cast<void*>(region_.data);
+  }
+
+  const void* data() const {
+    return reinterpret_cast<void*>(region_.data);
+  }
+
+  // Returns a MappedFile object that contains the contents of the input
+  // stream s starting from the current file position with size bytes.
+  // The file name must also be provided in the FstReadOptions as opts.source
+  // or else mapping will fail.  If mapping is not possible, then a MappedFile
+  // object with a new[]'ed  block of memory will be created.
+  static MappedFile* Map(istream* s, const FstReadOptions& opts, size_t size);
+
+  // Creates a MappedFile object with a new[]'ed block of memory of size.
+  // RECOMMENDED FOR INTERNAL USE ONLY, may change in future releases.
+  static MappedFile* Allocate(size_t size);
+
+  // Creates a MappedFile object pointing to a borrowed reference to data.
+  // This block of memory is not owned by the MappedFile object and will not
+  // be freed.
+  // RECOMMENDED FOR INTERNAL USE ONLY, may change in future releases.
+  static MappedFile* Borrow(void *data);
+
+  static const int kArchAlignment;
+
+ private:
+  explicit MappedFile(const MemoryRegion &region);
+
+  MemoryRegion region_;
+  DISALLOW_COPY_AND_ASSIGN(MappedFile);
+};
+}  // namespace fst
+
+#endif  // FST_LIB_MAPPED_FILE_H_
diff --git a/src/include/fst/matcher.h b/src/include/fst/matcher.h
index 5ab3d26..89ed9be 100644
--- a/src/include/fst/matcher.h
+++ b/src/include/fst/matcher.h
@@ -75,6 +75,8 @@
 //   bool Done() const;         // No more matches.
 //   const A& Value() const;    // Current arc (when !Done)
 //   void Next();               // Advance to next arc (when !Done)
+//   // Initially and after SetState() the iterator methods
+//   // have undefined behavior until Find() is called.
 //
 //   // Return matcher FST.
 //   const F& GetFst() const;
@@ -223,13 +225,44 @@
     loop_.nextstate = s;
   }
 
-  bool Find(Label match_label);
+  bool Find(Label match_label) {
+    exact_match_ = true;
+    if (error_) {
+      current_loop_ = false;
+      match_label_ = kNoLabel;
+      return false;
+    }
+    current_loop_ = match_label == 0;
+    match_label_ = match_label == kNoLabel ? 0 : match_label;
+    if (Search()) {
+      return true;
+    } else {
+      return current_loop_;
+    }
+  }
 
+  // Positions matcher to the first position where inserting
+  // match_label would maintain the sort order.
+  void LowerBound(Label match_label) {
+    exact_match_ = false;
+    current_loop_ = false;
+    if (error_) {
+      match_label_ = kNoLabel;
+      return;
+    }
+    match_label_ = match_label;
+    Search();
+  }
+
+  // After Find(), returns false if no more exact matches.
+  // After LowerBound(), returns false if no more arcs.
   bool Done() const {
     if (current_loop_)
       return false;
     if (aiter_->Done())
       return true;
+    if (!exact_match_)
+      return false;
     aiter_->SetFlags(
       match_type_ == MATCH_INPUT ? kArcILabelValue : kArcOLabelValue,
       kArcValueFlags);
@@ -261,6 +294,8 @@
     return outprops;
   }
 
+  size_t Position() const { return aiter_ ? aiter_->Position() : 0; }
+
  private:
   virtual void SetState_(StateId s) { SetState(s); }
   virtual bool Find_(Label label) { return Find(label); }
@@ -268,6 +303,8 @@
   virtual const Arc& Value_() const { return Value(); }
   virtual void Next_() { Next(); }
 
+  bool Search();
+
   const F *fst_;
   StateId s_;                     // Current state
   ArcIterator<F> *aiter_;         // Iterator for current state
@@ -277,20 +314,16 @@
   size_t narcs_;                  // Current state arc count
   Arc loop_;                      // For non-consuming symbols
   bool current_loop_;             // Current arc is the implicit loop
+  bool exact_match_;              // Exact match or lower bound?
   bool error_;                    // Error encountered
 
   void operator=(const SortedMatcher<F> &);  // Disallow
 };
 
+// Returns true iff match to match_label_. Positions arc iterator at
+// lower bound regardless.
 template <class F> inline
-bool SortedMatcher<F>::Find(Label match_label) {
-  if (error_) {
-    current_loop_ = false;
-    match_label_ = kNoLabel;
-    return false;
-  }
-  current_loop_ = match_label == 0;
-  match_label_ = match_label == kNoLabel ? 0 : match_label;
+bool SortedMatcher<F>::Search() {
   aiter_->SetFlags(
       match_type_ == MATCH_INPUT ? kArcILabelValue : kArcOLabelValue,
       kArcValueFlags);
@@ -321,7 +354,8 @@
         return true;
       }
     }
-    return current_loop_;
+    aiter_->Seek(low);
+    return false;
   } else {
     // Linear search for match.
     for (aiter_->Reset(); !aiter_->Done(); aiter_->Next()) {
@@ -333,7 +367,7 @@
       if (label > match_label_)
         break;
     }
-    return current_loop_;
+    return false;
   }
 }
 
@@ -1047,16 +1081,19 @@
     }
   }
 
+  void RemoveMultiEpsLabel(Label label) {
+    if (label == 0) {
+      FSTERROR() << "MultiEpsMatcher: Bad multi-eps label: 0";
+    } else {
+      multi_eps_labels_.Erase(label);
+    }
+  }
+
   void ClearMultiEpsLabels() {
     multi_eps_labels_.Clear();
   }
 
 private:
-  // Specialized for 'set' - log lookup
-  bool IsMultiEps(const set<Label> &multi_eps_labels, Label label) const {
-    return multi_eps_labels.Find(label) != multi_eps_labels.end();
-  }
-
   M *matcher_;
   uint32 flags_;
   bool own_matcher_;             // Does this class delete the matcher?
diff --git a/src/include/fst/queue.h b/src/include/fst/queue.h
index e31f087..95a082d 100644
--- a/src/include/fst/queue.h
+++ b/src/include/fst/queue.h
@@ -23,6 +23,7 @@
 #define FST_LIB_QUEUE_H__
 
 #include <deque>
+using std::deque;
 #include <vector>
 using std::vector;
 
@@ -791,13 +792,13 @@
 };
 
 
-// Pruning queue discipline: Enqueues a state 's' only when its
-// shortest distance (so far), as specified by 'distance', is less
-// than (as specified by 'comp') the shortest distance Times() the
-// 'threshold' to any state in the same equivalence class, as
-// specified by the function object 'class_func'. The underlying
-// queue discipline is specified by 'queue'. The ownership of 'queue'
-// is given to this class.
+// Distance-based pruning queue discipline: Enqueues a state 's'
+// only when its shortest distance (so far), as specified by
+// 'distance', is less than (as specified by 'comp') the shortest
+// distance Times() the 'threshold' to any state in the same
+// equivalence class, as specified by the function object
+// 'class_func'. The underlying queue discipline is specified by
+// 'queue'. The ownership of 'queue' is given to this class.
 template <typename Q, typename L, typename C>
 class PruneQueue : public QueueBase<typename Q::StateId> {
  public:
@@ -884,6 +885,54 @@
 };
 
 
+// Filter-based pruning queue discipline: Enqueues a state 's' only
+// if allowed by the filter, specified by the function object 'state_filter'.
+// The underlying queue discipline is specified by 'queue'. The ownership
+// of 'queue' is given to this class.
+template <typename Q, typename F>
+class FilterQueue : public QueueBase<typename Q::StateId> {
+ public:
+  typedef typename Q::StateId StateId;
+
+  FilterQueue(Q *queue, const F &state_filter)
+    : QueueBase<StateId>(OTHER_QUEUE),
+      queue_(queue),
+      state_filter_(state_filter) {}
+
+  ~FilterQueue() { delete queue_; }
+
+  StateId Head() const { return queue_->Head(); }
+
+  // Enqueues only if allowed by state filter.
+  void Enqueue(StateId s) {
+    if (state_filter_(s)) {
+      queue_->Enqueue(s);
+    }
+  }
+
+  void Dequeue() { queue_->Dequeue(); }
+
+  void Update(StateId s) {}
+  bool Empty() const { return queue_->Empty(); }
+  void Clear() { queue_->Clear(); }
+
+ private:
+  // This allows base-class virtual access to non-virtual derived-
+  // class members of the same name. It makes the derived class more
+  // efficient to use but unsafe to further derive.
+  virtual StateId Head_() const { return Head(); }
+  virtual void Enqueue_(StateId s) { Enqueue(s); }
+  virtual void Dequeue_() { Dequeue(); }
+  virtual void Update_(StateId s) { Update(s); }
+  virtual bool Empty_() const { return Empty(); }
+  virtual void Clear_() { return Clear(); }
+
+  Q *queue_;
+  const F &state_filter_;             // Filter to prune states
+
+  DISALLOW_COPY_AND_ASSIGN(FilterQueue);
+};
+
 }  // namespace fst
 
 #endif
diff --git a/src/include/fst/relabel.h b/src/include/fst/relabel.h
index 685d42a..dc675b6 100644
--- a/src/include/fst/relabel.h
+++ b/src/include/fst/relabel.h
@@ -34,6 +34,10 @@
 #include <fst/test-properties.h>
 
 
+#include <tr1/unordered_map>
+using std::tr1::unordered_map;
+using std::tr1::unordered_multimap;
+
 namespace fst {
 
 //
diff --git a/src/include/fst/script/convert.h b/src/include/fst/script/convert.h
index 2c70a70..4a3ce6b 100644
--- a/src/include/fst/script/convert.h
+++ b/src/include/fst/script/convert.h
@@ -34,7 +34,7 @@
   const string &new_type = args->args.arg2;
 
   Fst<Arc> *result = Convert(fst, new_type);
-  args->retval = new FstClass(result);
+  args->retval = new FstClass(*result);
   delete result;
 }
 
diff --git a/src/include/fst/script/disambiguate.h b/src/include/fst/script/disambiguate.h
new file mode 100644
index 0000000..e42a9c2
--- /dev/null
+++ b/src/include/fst/script/disambiguate.h
@@ -0,0 +1,68 @@
+
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// Copyright 2005-2010 Google, Inc.
+// Author: riley@google.com (Jake Ratkiewicz)
+
+#ifndef FST_SCRIPT_DISAMBIGUATE_H_
+#define FST_SCRIPT_DISAMBIGUATE_H_
+
+#include <fst/disambiguate.h>
+#include <fst/script/arg-packs.h>
+#include <fst/script/fst-class.h>
+#include <fst/script/weight-class.h>
+
+namespace fst {
+namespace script {
+
+struct DisambiguateOptions {
+  float delta;
+  WeightClass weight_threshold;
+  int64 state_threshold;
+  int64 subsequential_label;
+
+  explicit DisambiguateOptions(float d = fst::kDelta,
+                              WeightClass w =
+                                fst::script::WeightClass::Zero(),
+                              int64 n = fst::kNoStateId, int64 l = 0)
+      : delta(d), weight_threshold(w), state_threshold(n),
+        subsequential_label(l) {}
+};
+
+typedef args::Package<const FstClass&, MutableFstClass*,
+                      const DisambiguateOptions &> DisambiguateArgs;
+
+template<class Arc>
+void Disambiguate(DisambiguateArgs *args) {
+  const Fst<Arc> &ifst = *(args->arg1.GetFst<Arc>());
+  MutableFst<Arc> *ofst = args->arg2->GetMutableFst<Arc>();
+  const DisambiguateOptions &opts = args->arg3;
+
+  fst::DisambiguateOptions<Arc> detargs;
+  detargs.delta = opts.delta;
+  detargs.weight_threshold =
+      *(opts.weight_threshold.GetWeight<typename Arc::Weight>());
+  detargs.state_threshold = opts.state_threshold;
+  detargs.subsequential_label = opts.subsequential_label;
+
+  Disambiguate(ifst, ofst, detargs);
+}
+
+void Disambiguate(const FstClass &ifst, MutableFstClass *ofst,
+                 const DisambiguateOptions &opts =
+                   fst::script::DisambiguateOptions());
+
+}  // namespace script
+}  // namespace fst
+
+#endif  // FST_SCRIPT_DISAMBIGUATE_H_
diff --git a/src/include/fst/script/fst-class.h b/src/include/fst/script/fst-class.h
index a820c1c..fe2cf53 100644
--- a/src/include/fst/script/fst-class.h
+++ b/src/include/fst/script/fst-class.h
@@ -52,8 +52,8 @@
   virtual const string &WeightType() const = 0;
   virtual const SymbolTable *InputSymbols() const = 0;
   virtual const SymbolTable *OutputSymbols() const = 0;
-  virtual void Write(const string& fname) const = 0;
-  virtual void Write(ostream &ostr, const FstWriteOptions &opts) const = 0;
+  virtual bool Write(const string& fname) const = 0;
+  virtual bool Write(ostream &ostr, const FstWriteOptions &opts) const = 0;
   virtual uint64 Properties(uint64 mask, bool test) const = 0;
   virtual ~FstClassBase() { }
 };
@@ -82,6 +82,8 @@
                         bool should_own = false) :
       impl_(should_own ? impl : impl->Copy()) { }
 
+  explicit FstClassImpl(const Fst<Arc> &impl) : impl_(impl.Copy()) {  }
+
   virtual const string &ArcType() const {
     return Arc::Type();
   }
@@ -112,12 +114,12 @@
     static_cast<MutableFst<Arc> *>(impl_)->SetOutputSymbols(os);
   }
 
-  virtual void Write(const string &fname) const {
-    impl_->Write(fname);
+  virtual bool Write(const string &fname) const {
+    return impl_->Write(fname);
   }
 
-  virtual void Write(ostream &ostr, const FstWriteOptions &opts) const {
-    impl_->Write(ostr, opts);
+  virtual bool Write(ostream &ostr, const FstWriteOptions &opts) const {
+    return impl_->Write(ostr, opts);
   }
 
   virtual uint64 Properties(uint64 mask, bool test) const {
@@ -166,10 +168,10 @@
   }
 
   template<class Arc>
-  explicit FstClass(Fst<Arc> *fst) : impl_(new FstClassImpl<Arc>(fst)) {
+  explicit FstClass(const Fst<Arc> &fst) : impl_(new FstClassImpl<Arc>(fst)) {
   }
 
-  explicit FstClass(const FstClass &other) : impl_(other.impl_->Copy()) { }
+  FstClass(const FstClass &other) : impl_(other.impl_->Copy()) { }
 
   FstClass &operator=(const FstClass &other) {
     delete impl_;
@@ -201,12 +203,12 @@
     return impl_->WeightType();
   }
 
-  virtual void Write(const string &fname) const {
-    impl_->Write(fname);
+  virtual bool Write(const string &fname) const {
+    return impl_->Write(fname);
   }
 
-  virtual void Write(ostream &ostr, const FstWriteOptions &opts) const {
-    impl_->Write(ostr, opts);
+  virtual bool Write(ostream &ostr, const FstWriteOptions &opts) const {
+    return impl_->Write(ostr, opts);
   }
 
   virtual uint64 Properties(uint64 mask, bool test) const {
@@ -253,7 +255,7 @@
     if (!u) {
       return 0;
     } else {
-      FstClassT *r = new FstClassT(u);
+      FstClassT *r = new FstClassT(*u);
       delete u;
       return r;
     }
@@ -276,7 +278,7 @@
 class MutableFstClass : public FstClass {
  public:
   template<class Arc>
-  explicit MutableFstClass(MutableFst<Arc> *fst) :
+  explicit MutableFstClass(const MutableFst<Arc> &fst) :
       FstClass(fst) { }
 
   template<class Arc>
@@ -294,18 +296,18 @@
     if (!mfst) {
       return 0;
     } else {
-      MutableFstClass *retval = new MutableFstClass(mfst);
+      MutableFstClass *retval = new MutableFstClass(*mfst);
       delete mfst;
       return retval;
     }
   }
 
-  virtual void Write(const string &fname) const {
-    GetImpl()->Write(fname);
+  virtual bool Write(const string &fname) const {
+    return GetImpl()->Write(fname);
   }
 
-  virtual void Write(ostream &ostr, const FstWriteOptions &opts) const {
-    GetImpl()->Write(ostr, opts);
+  virtual bool Write(ostream &ostr, const FstWriteOptions &opts) const {
+    return GetImpl()->Write(ostr, opts);
   }
 
   static MutableFstClass *Read(const string &fname, bool convert = false);
@@ -344,7 +346,7 @@
   explicit VectorFstClass(const string &arc_type);
 
   template<class Arc>
-  explicit VectorFstClass(VectorFst<Arc> *fst) :
+  explicit VectorFstClass(const VectorFst<Arc> &fst) :
       MutableFstClass(fst) { }
 
   template<class Arc>
@@ -354,7 +356,7 @@
     if (!vfst) {
       return 0;
     } else {
-      VectorFstClass *retval = new VectorFstClass(vfst);
+      VectorFstClass *retval = new VectorFstClass(*vfst);
       delete vfst;
       return retval;
     }
diff --git a/src/include/fst/script/map.h b/src/include/fst/script/map.h
index 2332074..3caaa9f 100644
--- a/src/include/fst/script/map.h
+++ b/src/include/fst/script/map.h
@@ -59,46 +59,54 @@
   float delta =  args->args.arg3;
   typename Arc::Weight w = *(args->args.arg4.GetWeight<typename Arc::Weight>());
 
+  Fst<Arc> *fst = NULL;
+  Fst<LogArc> *lfst = NULL;
+  Fst<Log64Arc> *l64fst = NULL;
+  Fst<StdArc> *sfst = NULL;
   if (map_type == ARC_SUM_MAPPER) {
-    args->retval = new FstClass(
-        script::StateMap(ifst, ArcSumMapper<Arc>(ifst)));
+    args->retval = new FstClass(*(fst =
+        script::StateMap(ifst, ArcSumMapper<Arc>(ifst))));
   } else if (map_type == IDENTITY_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, IdentityArcMapper<Arc>()));
+    args->retval = new FstClass(*(fst =
+        script::ArcMap(ifst, IdentityArcMapper<Arc>())));
   } else if (map_type == INVERT_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, InvertWeightMapper<Arc>()));
+    args->retval = new FstClass(*(fst =
+        script::ArcMap(ifst, InvertWeightMapper<Arc>())));
   } else if (map_type == PLUS_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, PlusMapper<Arc>(w)));
+    args->retval = new FstClass(*(fst =
+        script::ArcMap(ifst, PlusMapper<Arc>(w))));
   } else if (map_type == QUANTIZE_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, QuantizeMapper<Arc>(delta)));
+    args->retval = new FstClass(*(fst =
+        script::ArcMap(ifst, QuantizeMapper<Arc>(delta))));
   } else if (map_type == RMWEIGHT_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, RmWeightMapper<Arc>()));
+    args->retval = new FstClass(*(fst =
+        script::ArcMap(ifst, RmWeightMapper<Arc>())));
   } else if (map_type == SUPERFINAL_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, SuperFinalMapper<Arc>()));
+    args->retval = new FstClass(*(fst =
+        script::ArcMap(ifst, SuperFinalMapper<Arc>())));
   } else if (map_type == TIMES_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, TimesMapper<Arc>(w)));
+    args->retval = new FstClass(*(fst =
+        script::ArcMap(ifst, TimesMapper<Arc>(w))));
   } else if (map_type == TO_LOG_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, WeightConvertMapper<Arc, LogArc>()));
+    args->retval = new FstClass(*(lfst =
+        script::ArcMap(ifst, WeightConvertMapper<Arc, LogArc>())));
   } else if (map_type == TO_LOG64_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, WeightConvertMapper<Arc, Log64Arc>()));
+    args->retval = new FstClass(*(l64fst =
+        script::ArcMap(ifst, WeightConvertMapper<Arc, Log64Arc>())));
   } else if (map_type == TO_STD_MAPPER) {
-    args->retval = new FstClass(
-        script::ArcMap(ifst, WeightConvertMapper<Arc, StdArc>()));
+    args->retval = new FstClass(*(sfst =
+        script::ArcMap(ifst, WeightConvertMapper<Arc, StdArc>())));
   } else {
     FSTERROR() << "Error: unknown/unsupported mapper type: "
                << map_type;
     VectorFst<Arc> *ofst = new VectorFst<Arc>;
     ofst->SetProperties(kError, kError);
-    args->retval = new FstClass(ofst);
+    args->retval = new FstClass(*(fst =ofst));
   }
+  delete sfst;
+  delete l64fst;
+  delete lfst;
+  delete fst;
 }
 
 
diff --git a/src/include/fst/script/shortest-distance.h b/src/include/fst/script/shortest-distance.h
index 5fc2976..39c5045 100644
--- a/src/include/fst/script/shortest-distance.h
+++ b/src/include/fst/script/shortest-distance.h
@@ -175,11 +175,11 @@
       return;
 
     case FIFO_QUEUE:
-       ShortestDistanceHelper<Arc, FifoQueue<StateId> >(args);
+      ShortestDistanceHelper<Arc, FifoQueue<StateId> >(args);
       return;
 
     case LIFO_QUEUE:
-       ShortestDistanceHelper<Arc, LifoQueue<StateId> >(args);
+      ShortestDistanceHelper<Arc, LifoQueue<StateId> >(args);
       return;
 
     case SHORTEST_FIRST_QUEUE:
@@ -188,11 +188,11 @@
       return;
 
     case STATE_ORDER_QUEUE:
-       ShortestDistanceHelper<Arc, StateOrderQueue<StateId> >(args);
+      ShortestDistanceHelper<Arc, StateOrderQueue<StateId> >(args);
       return;
 
     case TOP_ORDER_QUEUE:
-       ShortestDistanceHelper<Arc, TopOrderQueue<StateId> >(args);
+      ShortestDistanceHelper<Arc, TopOrderQueue<StateId> >(args);
       return;
   }
 }
diff --git a/src/include/fst/script/weight-class.h b/src/include/fst/script/weight-class.h
index 228216d..b9f7ddf 100644
--- a/src/include/fst/script/weight-class.h
+++ b/src/include/fst/script/weight-class.h
@@ -128,6 +128,13 @@
     return w;
   }
 
+  const string &Type() const {
+    if (impl_) return impl_->Type();
+    static const string no_type = "none";
+    return no_type;
+  }
+
+
   ~WeightClass() { if (impl_) delete impl_; }
  private:
   enum ElementType { ZERO, ONE, OTHER };
diff --git a/src/include/fst/shortest-distance.h b/src/include/fst/shortest-distance.h
index 9320c4c..ec47a14 100644
--- a/src/include/fst/shortest-distance.h
+++ b/src/include/fst/shortest-distance.h
@@ -22,6 +22,7 @@
 #define FST_LIB_SHORTEST_DISTANCE_H__
 
 #include <deque>
+using std::deque;
 #include <vector>
 using std::vector;
 
diff --git a/src/include/fst/shortest-path.h b/src/include/fst/shortest-path.h
index f12970c..9cd13d9 100644
--- a/src/include/fst/shortest-path.h
+++ b/src/include/fst/shortest-path.h
@@ -458,7 +458,7 @@
   } else {
     vector<Weight> ddistance;
     DeterminizeFstOptions<ReverseArc> dopts(opts.delta);
-    DeterminizeFst<ReverseArc> dfst(rfst, *distance, &ddistance, dopts);
+    DeterminizeFst<ReverseArc> dfst(rfst, distance, &ddistance, dopts);
     NShortestPath(dfst, ofst, ddistance, n, opts.delta,
                   opts.weight_threshold, opts.state_threshold);
   }
diff --git a/src/include/fst/state-map.h b/src/include/fst/state-map.h
index 2c59e1d..0e65d74 100644
--- a/src/include/fst/state-map.h
+++ b/src/include/fst/state-map.h
@@ -191,8 +191,6 @@
   using FstImpl<B>::SetInputSymbols;
   using FstImpl<B>::SetOutputSymbols;
 
-  using VectorFstBaseImpl<typename CacheImpl<B>::State>::NumStates;
-
   using CacheImpl<B>::PushArc;
   using CacheImpl<B>::HasArcs;
   using CacheImpl<B>::HasFinal;
@@ -535,7 +533,7 @@
   explicit ArcUniqueMapper(const Fst<A> &fst) : fst_(fst), i_(0) {}
 
   // Allows updating Fst argument; pass only if changed.
-  ArcUniqueMapper(const ArcSumMapper<A> &mapper,
+  ArcUniqueMapper(const ArcUniqueMapper<A> &mapper,
                   const Fst<A> *fst = 0)
       : fst_(fst ? *fst : mapper.fst_), i_(0) {}
 
diff --git a/src/include/fst/state-table.h b/src/include/fst/state-table.h
index 7d863a0..d8107a1 100644
--- a/src/include/fst/state-table.h
+++ b/src/include/fst/state-table.h
@@ -22,6 +22,7 @@
 #define FST_LIB_STATE_TABLE_H__
 
 #include <deque>
+using std::deque;
 #include <vector>
 using std::vector;
 
@@ -58,14 +59,14 @@
 // struct StateTuple {
 //   typedef typename S StateId;
 //
-//   // Required constructor.
+//   // Required constructors.
 //   StateTuple();
+//   StateTuple(const StateTuple &);
 // };
 
 
 // An implementation using a hash map for the tuple to state ID mapping.
-// The state tuple T must have == defined and the default constructor
-// must produce a tuple that will never be seen. H is the hash function.
+// The state tuple T must have == defined. H is the hash function.
 template <class T, class H>
 class HashStateTable : public HashBiTable<typename T::StateId, T, H> {
  public:
@@ -76,15 +77,18 @@
   using HashBiTable<StateId, T, H>::Size;
 
   HashStateTable() : HashBiTable<StateId, T, H>() {}
+
+  // Reserves space for table_size elements.
+  explicit HashStateTable(size_t table_size)
+      : HashBiTable<StateId, T, H>(table_size) {}
+
   StateId FindState(const StateTuple &tuple) { return FindId(tuple); }
   const StateTuple &Tuple(StateId s) const { return FindEntry(s); }
 };
 
 
-// An implementation using a hash set for the tuple to state ID
-// mapping. The state tuple T must have == defined and the default
-// constructor must produce a tuple that will never be seen. H is the
-// hash function.
+// An implementation using a hash map for the tuple to state ID mapping.
+// The state tuple T must have == defined. H is the hash function.
 template <class T, class H>
 class CompactHashStateTable
     : public CompactHashBiTable<typename T::StateId, T, H> {
@@ -97,7 +101,7 @@
 
   CompactHashStateTable() : CompactHashBiTable<StateId, T, H>() {}
 
-  // Reserves space for table_size elements.
+  // Reserves space for 'table_size' elements.
   explicit CompactHashStateTable(size_t table_size)
       : CompactHashBiTable<StateId, T, H>(table_size) {}
 
@@ -122,7 +126,10 @@
   using VectorBiTable<StateId, T, FP>::Size;
   using VectorBiTable<StateId, T, FP>::Fingerprint;
 
-  explicit VectorStateTable(FP *fp = 0) : VectorBiTable<StateId, T, FP>(fp) {}
+  // Reserves space for 'table_size' elements.
+  explicit VectorStateTable(FP *fp = 0, size_t table_size = 0)
+      : VectorBiTable<StateId, T, FP>(fp, table_size) {}
+
   StateId FindState(const StateTuple &tuple) { return FindId(tuple); }
   const StateTuple &Tuple(StateId s) const { return FindEntry(s); }
 };
@@ -268,7 +275,9 @@
 
   GenericComposeStateTable(const Fst<A> &fst1, const Fst<A> &fst2) {}
 
-  GenericComposeStateTable(const GenericComposeStateTable<A, F> &table) {}
+  // Reserves space for 'table_size' elements.
+  GenericComposeStateTable(const Fst<A> &fst1, const Fst<A> &fst2,
+                           size_t table_size) : H(table_size) {}
 
   bool Error() const { return false; }
 
@@ -342,17 +351,18 @@
   typedef typename A::StateId StateId;
   typedef F FilterState;
   typedef ComposeStateTuple<StateId, F> StateTuple;
+  typedef VectorStateTable<StateTuple,
+                           ComposeFingerprint<StateId, F> > StateTable;
 
-  ProductComposeStateTable(const Fst<A> &fst1, const Fst<A> &fst2)
-      : VectorStateTable<ComposeStateTuple<StateId, F>,
-                         ComposeFingerprint<StateId, F> >
-  (new ComposeFingerprint<StateId, F>(CountStates(fst1),
-                                      CountStates(fst2))) { }
+  // Reserves space for 'table_size' elements.
+  ProductComposeStateTable(const Fst<A> &fst1, const Fst<A> &fst2,
+                           size_t table_size = 0)
+      : StateTable(new ComposeFingerprint<StateId, F>(CountStates(fst1),
+                                                      CountStates(fst2)),
+                   table_size) {}
 
   ProductComposeStateTable(const ProductComposeStateTable<A, F> &table)
-      : VectorStateTable<ComposeStateTuple<StateId, F>,
-                         ComposeFingerprint<StateId, F> >
-        (new ComposeFingerprint<StateId, F>(table.Fingerprint())) {}
+      : StateTable(new ComposeFingerprint<StateId, F>(table.Fingerprint())) {}
 
   bool Error() const { return false; }
 
@@ -375,6 +385,8 @@
   typedef typename A::StateId StateId;
   typedef F FilterState;
   typedef ComposeStateTuple<StateId, F> StateTuple;
+  typedef VectorStateTable<StateTuple,
+                           ComposeState1Fingerprint<StateId, F> > StateTable;
 
   StringDetComposeStateTable(const Fst<A> &fst1, const Fst<A> &fst2)
       : error_(false) {
@@ -389,7 +401,7 @@
   }
 
   StringDetComposeStateTable(const StringDetComposeStateTable<A, F> &table)
-   : error_(table.error_) {}
+      : StateTable(table), error_(table.error_) {}
 
   bool Error() const { return error_; }
 
@@ -409,12 +421,14 @@
 template <typename A, typename F>
 class DetStringComposeStateTable : public
 VectorStateTable<ComposeStateTuple<typename A::StateId, F>,
-                 ComposeState1Fingerprint<typename A::StateId, F> > {
+                 ComposeState2Fingerprint<typename A::StateId, F> > {
  public:
   typedef A Arc;
   typedef typename A::StateId StateId;
   typedef F FilterState;
   typedef ComposeStateTuple<StateId, F> StateTuple;
+  typedef VectorStateTable<StateTuple,
+                           ComposeState2Fingerprint<StateId, F> > StateTable;
 
   DetStringComposeStateTable(const Fst<A> &fst1, const Fst<A> &fst2)
       :error_(false) {
@@ -429,7 +443,7 @@
   }
 
   DetStringComposeStateTable(const DetStringComposeStateTable<A, F> &table)
-      : error_(table.error_) {}
+      : StateTable(table), error_(table.error_) {}
 
   bool Error() const { return error_; }
 
@@ -456,8 +470,6 @@
 
   ErasableComposeStateTable(const Fst<A> &fst1, const Fst<A> &fst2) {}
 
-  ErasableComposeStateTable(const ErasableComposeStateTable<A, F> &table) {}
-
   bool Error() const { return false; }
 
  private:
diff --git a/src/include/fst/string.h b/src/include/fst/string.h
index d51182e..9eaf7a3 100644
--- a/src/include/fst/string.h
+++ b/src/include/fst/string.h
@@ -57,6 +57,15 @@
     return true;
   }
 
+  template <class F>
+  bool operator()(const string &s, F *fst, Weight w) const {
+    vector<Label> labels;
+    if (!ConvertStringToLabels(s, &labels))
+      return false;
+    Compile(labels, fst, w);
+    return true;
+  }
+
  private:
   bool ConvertStringToLabels(const string &str, vector<Label> *labels) const {
     labels->clear();
@@ -83,22 +92,35 @@
     return true;
   }
 
-  void Compile(const vector<Label> &labels, MutableFst<A> *fst) const {
+  void Compile(const vector<Label> &labels, MutableFst<A> *fst,
+               const Weight &weight = Weight::One()) const {
     fst->DeleteStates();
     while (fst->NumStates() <= labels.size())
       fst->AddState();
     for (size_t i = 0; i < labels.size(); ++i)
       fst->AddArc(i, Arc(labels[i], labels[i], Weight::One(), i + 1));
     fst->SetStart(0);
-    fst->SetFinal(labels.size(), Weight::One());
+    fst->SetFinal(labels.size(), weight);
   }
 
   template <class Unsigned>
-  void Compile(const vector<Label> &labels, CompactFst<A, StringCompactor<A>,
-               Unsigned> *fst) const {
+  void Compile(const vector<Label> &labels,
+               CompactFst<A, StringCompactor<A>, Unsigned> *fst) const {
     fst->SetCompactElements(labels.begin(), labels.end());
   }
 
+  template <class Unsigned>
+  void Compile(const vector<Label> &labels,
+               CompactFst<A, WeightedStringCompactor<A>, Unsigned> *fst,
+               const Weight &weight = Weight::One()) const {
+    vector<pair<Label, Weight> > compacts;
+    compacts.reserve(labels.size());
+    for (size_t i = 0; i < labels.size(); ++i)
+      compacts.push_back(make_pair(labels[i], Weight::One()));
+    compacts.back().second = weight;
+    fst->SetCompactElements(compacts.begin(), compacts.end());
+  }
+
   bool ConvertSymbolToLabel(const char *s, Label* output) const {
     int64 n;
     if (syms_) {
@@ -167,6 +189,7 @@
       }
       *output = sstrm.str();
     } else if (token_type_ == BYTE) {
+      output->reserve(labels_.size());
       for (size_t i = 0; i < labels_.size(); ++i) {
         output->push_back(labels_[i]);
       }
diff --git a/src/include/fst/util.h b/src/include/fst/util.h
index 1f6046b..4eb8fba 100644
--- a/src/include/fst/util.h
+++ b/src/include/fst/util.h
@@ -268,17 +268,17 @@
   s->append(strm.str().data(), strm.str().size());
 }
 
-// Utilities for reading/writing label pairs
+// Utilities for reading/writing integer pairs (typically labels)
 
 // Returns true on success
-template <typename Label>
-bool ReadLabelPairs(const string& filename,
-                    vector<pair<Label, Label> >* pairs,
+template <typename I>
+bool ReadIntPairs(const string& filename,
+                    vector<pair<I, I> >* pairs,
                     bool allow_negative = false) {
   ifstream strm(filename.c_str());
 
   if (!strm) {
-    LOG(ERROR) << "ReadLabelPairs: Can't open file: " << filename;
+    LOG(ERROR) << "ReadIntPairs: Can't open file: " << filename;
     return false;
   }
 
@@ -291,33 +291,34 @@
     ++nline;
     vector<char *> col;
     SplitToVector(line, "\n\t ", &col, true);
-    if (col.size() == 0 || col[0][0] == '\0')  // empty line
+    // empty line or comment?
+    if (col.size() == 0 || col[0][0] == '\0' || col[0][0] == '#')
       continue;
     if (col.size() != 2) {
-      LOG(ERROR) << "ReadLabelPairs: Bad number of columns, "
+      LOG(ERROR) << "ReadIntPairs: Bad number of columns, "
                  << "file = " << filename << ", line = " << nline;
       return false;
     }
 
     bool err;
-    Label frmlabel = StrToInt64(col[0], filename, nline, allow_negative, &err);
+    I i1 = StrToInt64(col[0], filename, nline, allow_negative, &err);
     if (err) return false;
-    Label tolabel = StrToInt64(col[1], filename, nline, allow_negative, &err);
+    I i2 = StrToInt64(col[1], filename, nline, allow_negative, &err);
     if (err) return false;
-    pairs->push_back(make_pair(frmlabel, tolabel));
+    pairs->push_back(make_pair(i1, i2));
   }
   return true;
 }
 
 // Returns true on success
-template <typename Label>
-bool WriteLabelPairs(const string& filename,
-                     const vector<pair<Label, Label> >& pairs) {
+template <typename I>
+bool WriteIntPairs(const string& filename,
+                   const vector<pair<I, I> >& pairs) {
   ostream *strm = &cout;
   if (!filename.empty()) {
     strm = new ofstream(filename.c_str());
     if (!*strm) {
-      LOG(ERROR) << "WriteLabelPairs: Can't open file: " << filename;
+      LOG(ERROR) << "WriteIntPairs: Can't open file: " << filename;
       return false;
     }
   }
@@ -326,7 +327,7 @@
     *strm << pairs[n].first << "\t" << pairs[n].second << "\n";
 
   if (!*strm) {
-    LOG(ERROR) << "WriteLabelPairs: Write failed: "
+    LOG(ERROR) << "WriteIntPairs: Write failed: "
                << (filename.empty() ? "standard output" : filename);
     return false;
   }
@@ -335,6 +336,21 @@
   return true;
 }
 
+// Utilities for reading/writing label pairs
+
+template <typename Label>
+bool ReadLabelPairs(const string& filename,
+                    vector<pair<Label, Label> >* pairs,
+                    bool allow_negative = false) {
+  return ReadIntPairs(filename, pairs, allow_negative);
+}
+
+template <typename Label>
+bool WriteLabelPairs(const string& filename,
+                     vector<pair<Label, Label> >& pairs) {
+  return WriteIntPairs(filename, pairs);
+}
+
 // Utilities for converting a type name to a legal C symbol.
 
 void ConvertToLegalCSymbol(string *s);
@@ -344,8 +360,8 @@
 // UTILITIES FOR STREAM I/O
 //
 
-bool AlignInput(istream &strm, int align);
-bool AlignOutput(ostream &strm, int align);
+bool AlignInput(istream &strm);
+bool AlignOutput(ostream &strm);
 
 //
 // UTILITIES FOR PROTOCOL BUFFER I/O
@@ -380,6 +396,17 @@
         max_key_ = key;
   }
 
+  void Erase(Key key) {
+    set_.erase(key);
+    if (set_.empty()) {
+        min_key_ = max_key_ = NoKey;
+    } else if (key == min_key_) {
+      ++min_key_;
+    } else if (key == max_key_) {
+      --max_key_;
+    }
+  }
+
   void Clear() {
     set_.clear();
     min_key_ = max_key_ = NoKey;
@@ -393,10 +420,26 @@
       return set_.find(key);
   }
 
+  bool Member(Key key) const {
+    if (min_key_ == NoKey || key < min_key_ || max_key_ < key) {
+      return false;   // out of range
+    } else if (min_key_ != NoKey && max_key_ + 1 == min_key_ + set_.size()) {
+      return true;    // dense range
+    } else {
+      return set_.find(key) != set_.end();
+    }
+  }
+
   const_iterator Begin() const { return set_.begin(); }
 
   const_iterator End() const { return set_.end(); }
 
+  // All stored keys are greater than or equal to this value.
+  Key LowerBound() const { return min_key_; }
+
+  // All stored keys are less than or equal to this value.
+  Key UpperBound() const { return max_key_; }
+
 private:
   set<Key> set_;
   Key min_key_;
diff --git a/src/include/fst/visit.h b/src/include/fst/visit.h
index a02d86a..5f5059a 100644
--- a/src/include/fst/visit.h
+++ b/src/include/fst/visit.h
@@ -238,18 +238,28 @@
 };
 
 
-// Visits input FST up to a state limit following queue order.
+// Visits input FST up to a state limit following queue order. If
+// 'access_only' is true, aborts on visiting first state not
+// accessible from the initial state.
 template <class A>
 class PartialVisitor {
  public:
   typedef A Arc;
   typedef typename A::StateId StateId;
 
-  explicit PartialVisitor(StateId maxvisit) : maxvisit_(maxvisit) {}
+  explicit PartialVisitor(StateId maxvisit, bool access_only = false)
+      : maxvisit_(maxvisit),
+        access_only_(access_only),
+        start_(kNoStateId) {}
 
-  void InitVisit(const Fst<A> &ifst) { nvisit_ = 0; }
+  void InitVisit(const Fst<A> &ifst) {
+    nvisit_ = 0;
+    start_ = ifst.Start();
+  }
 
-  bool InitState(StateId s, StateId) {
+  bool InitState(StateId s, StateId root) {
+    if (access_only_ && root != start_)
+      return false;
     ++nvisit_;
     return nvisit_ <= maxvisit_;
   }
@@ -262,7 +272,10 @@
 
  private:
   StateId maxvisit_;
+  bool access_only_;
   StateId nvisit_;
+  StateId start_;
+
 };
 
 
diff --git a/src/lib/Makefile.am b/src/lib/Makefile.am
index 9c3ef63..87c86ec 100644
--- a/src/lib/Makefile.am
+++ b/src/lib/Makefile.am
@@ -2,5 +2,5 @@
 
 lib_LTLIBRARIES = libfst.la
 libfst_la_SOURCES = compat.cc flags.cc fst.cc properties.cc \
-symbol-table.cc util.cc symbol-table-ops.cc
-libfst_la_LDFLAGS = -version-info 0:0:0
+symbol-table.cc util.cc symbol-table-ops.cc mapped-file.cc
+libfst_la_LDFLAGS = -version-info 1:0:0
diff --git a/src/lib/Makefile.in b/src/lib/Makefile.in
index 69f3928..2e8c99f 100644
--- a/src/lib/Makefile.in
+++ b/src/lib/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -37,10 +37,10 @@
 subdir = src/lib
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -69,11 +69,17 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(libdir)"
 LTLIBRARIES = $(lib_LTLIBRARIES)
 libfst_la_LIBADD =
 am_libfst_la_OBJECTS = compat.lo flags.lo fst.lo properties.lo \
-	symbol-table.lo util.lo symbol-table-ops.lo
+	symbol-table.lo util.lo symbol-table-ops.lo mapped-file.lo
 libfst_la_OBJECTS = $(am_libfst_la_OBJECTS)
 libfst_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
@@ -115,6 +121,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -124,11 +131,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -143,6 +145,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -168,6 +171,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -202,7 +206,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -221,9 +224,9 @@
 AM_CPPFLAGS = -I$(srcdir)/../include $(ICU_CPPFLAGS)
 lib_LTLIBRARIES = libfst.la
 libfst_la_SOURCES = compat.cc flags.cc fst.cc properties.cc \
-symbol-table.cc util.cc symbol-table-ops.cc
+symbol-table.cc util.cc symbol-table-ops.cc mapped-file.cc
 
-libfst_la_LDFLAGS = -version-info 0:0:0
+libfst_la_LDFLAGS = -version-info 1:0:0
 all: all-am
 
 .SUFFIXES:
@@ -289,7 +292,7 @@
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
-libfst.la: $(libfst_la_OBJECTS) $(libfst_la_DEPENDENCIES) 
+libfst.la: $(libfst_la_OBJECTS) $(libfst_la_DEPENDENCIES) $(EXTRA_libfst_la_DEPENDENCIES) 
 	$(libfst_la_LINK) -rpath $(libdir) $(libfst_la_OBJECTS) $(libfst_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
@@ -301,6 +304,7 @@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/compat.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flags.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fst.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mapped-file.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/properties.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symbol-table-ops.Plo@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symbol-table.Plo@am__quote@
@@ -432,10 +436,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/lib/compat.cc b/src/lib/compat.cc
index 2faabc5..7db8be1 100644
--- a/src/lib/compat.cc
+++ b/src/lib/compat.cc
@@ -33,7 +33,7 @@
                     bool omit_empty_strings) {
   char *p = full;
   while (p) {
-    if (p = strpbrk(full, delim))
+    if ((p = strpbrk(full, delim)))
       p[0] = '\0';
     if (!omit_empty_strings || full[0] != '\0')
       vec->push_back(full);
diff --git a/src/lib/flags.cc b/src/lib/flags.cc
index 222d66b..71be378 100644
--- a/src/lib/flags.cc
+++ b/src/lib/flags.cc
@@ -49,7 +49,7 @@
     string val = "";
 
     // split argval (arg=val) into arg and val
-    int pos = argval.find("=");
+    size_t pos = argval.find("=");
     if (pos != string::npos) {
       arg = argval.substr(0, pos);
       val = argval.substr(pos + 1);
diff --git a/src/lib/fst.cc b/src/lib/fst.cc
index 69bee35..f4bd95f 100644
--- a/src/lib/fst.cc
+++ b/src/lib/fst.cc
@@ -52,6 +52,9 @@
 DEFINE_string(save_relabel_ipairs, "",  "Save input relabel pairs to file");
 DEFINE_string(save_relabel_opairs, "",  "Save output relabel pairs to file");
 
+DEFINE_string(fst_read_mode, "read",
+              "Default file reading mode for mappable files");
+
 namespace fst {
 
 // Register VectorFst, ConstFst and EditFst for common arcs types
@@ -164,4 +167,27 @@
   return true;
 }
 
+FstReadOptions::FstReadOptions(const string& src, const FstHeader *hdr,
+                               const SymbolTable* isym, const SymbolTable* osym)
+  : source(src), header(hdr), isymbols(isym), osymbols(osym) {
+  mode = ReadMode(FLAGS_fst_read_mode);
+}
+
+FstReadOptions::FstReadOptions(const string& src, const SymbolTable* isym,
+                               const SymbolTable* osym)
+  : source(src), header(0), isymbols(isym), osymbols(osym) {
+  mode = ReadMode(FLAGS_fst_read_mode);
+}
+
+FstReadOptions::FileReadMode FstReadOptions::ReadMode(const string &mode) {
+  if (mode == "read") {
+    return READ;
+  }
+  if (mode == "map") {
+    return MAP;
+  }
+  LOG(ERROR) << "Unknown file read mode " << mode;
+  return READ;
+}
+
 }  // namespace fst
diff --git a/src/lib/mapped-file.cc b/src/lib/mapped-file.cc
new file mode 100644
index 0000000..2868cdb
--- /dev/null
+++ b/src/lib/mapped-file.cc
@@ -0,0 +1,105 @@
+
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// Copyright 2005-2010 Google, Inc.
+// Author: sorenj@google.com (Jeffrey Sorensen)
+
+#include <fst/mapped-file.h>
+
+#include <errno.h>
+#include <fcntl.h>
+
+namespace fst {
+
+// Alignment required for mapping structures (in bytes.)  Regions of memory
+// that are not aligned upon a 128 bit boundary will be read from the file
+// instead.  This is consistent with the alignment boundary set in the
+// const and compact fst code.
+const int MappedFile::kArchAlignment = 16;
+
+MappedFile::MappedFile(const MemoryRegion &region) : region_(region) { }
+
+MappedFile::~MappedFile() {
+  if (region_.size != 0) {
+    if (region_.mmap != NULL) {
+      VLOG(1) << "munmap'ed " << region_.size << " bytes at " << region_.mmap;
+      if (munmap(region_.mmap, region_.size) != 0) {
+        LOG(ERROR) << "failed to unmap region: "<< strerror(errno);
+      }
+    } else {
+      operator delete(region_.data);
+    }
+  }
+}
+
+MappedFile* MappedFile::Allocate(size_t size) {
+  MemoryRegion region;
+  region.data = size == 0 ? NULL : operator new(size);
+  region.mmap = NULL;
+  region.size = size;
+  return new MappedFile(region);
+}
+
+MappedFile* MappedFile::Borrow(void *data) {
+  MemoryRegion region;
+  region.data = data;
+  region.mmap = data;
+  region.size = 0;
+  return new MappedFile(region);
+}
+
+MappedFile* MappedFile::Map(istream* s, const FstReadOptions &opts,
+                            size_t size) {
+  std::streampos spos = s->tellg();
+  if (opts.mode == FstReadOptions::MAP && spos >= 0 &&
+      spos % kArchAlignment == 0) {
+    size_t pos = spos;
+    int fd = open(opts.source.c_str(), O_RDONLY);
+    if (fd != -1) {
+      int pagesize = getpagesize();
+      off_t offset = pos % pagesize;
+      off_t upsize = size + offset;
+      void *map = mmap(0, upsize, PROT_READ, MAP_SHARED, fd, pos - offset);
+      char *data = reinterpret_cast<char*>(map);
+      if (close(fd) == 0 && map != MAP_FAILED) {
+        MemoryRegion region;
+        region.mmap = map;
+        region.size = upsize;
+        region.data = reinterpret_cast<void*>(data + offset);
+        MappedFile *mmf = new MappedFile(region);
+        s->seekg(pos + size, ios::beg);
+        if (s) {
+          VLOG(1) << "mmap'ed region of " << size << " at offset " << pos
+                  << " from " << opts.source.c_str() << " to addr " << map;
+          return mmf;
+        }
+        delete mmf;
+      } else {
+        LOG(INFO) << "Mapping of file failed: " << strerror(errno);
+      }
+    }
+  }
+  // If all else fails resort to reading from file into allocated buffer.
+  if (opts.mode != FstReadOptions::READ) {
+    LOG(WARNING) << "File mapping at offset " << spos << " of file "
+                 << opts.source << " could not be honored, reading instead.";
+  }
+  MappedFile* mf = Allocate(size);
+  if (!s->read(reinterpret_cast<char*>(mf->mutable_data()), size)) {
+    delete mf;
+    return NULL;
+  }
+  return mf;
+}
+
+}  // namespace fst
diff --git a/src/lib/symbol-table.cc b/src/lib/symbol-table.cc
index a195a7c..2484ef5 100644
--- a/src/lib/symbol-table.cc
+++ b/src/lib/symbol-table.cc
@@ -55,10 +55,11 @@
       continue;
     if (col.size() != 2) {
       LOG(ERROR) << "SymbolTable::ReadText: Bad number of columns ("
-                 << col.size() << " skipping), "
+                 << col.size() << "), "
                  << "file = " << filename << ", line = " << nline
                  << ":<" << line << ">";
-      continue;
+      delete impl;
+      return 0;
     }
     const char *symbol = col[0];
     const char *value = col[1];
@@ -67,9 +68,10 @@
     if (p < value + strlen(value) ||
         (!opts.allow_negative && key < 0) || key == -1) {
       LOG(ERROR) << "SymbolTable::ReadText: Bad non-negative integer \""
-                 << value << "\" (skipping), "
+                 << value << "\", "
                  << "file = " << filename << ", line = " << nline;
-      continue;
+      delete impl;
+      return 0;
     }
     impl->AddSymbol(symbol, key);
   }
diff --git a/src/lib/util.cc b/src/lib/util.cc
index f754da5..ab877fd 100644
--- a/src/lib/util.cc
+++ b/src/lib/util.cc
@@ -21,6 +21,7 @@
 #include <cctype>
 #include <string>
 #include <fst/util.h>
+#include <fst/mapped-file.h>
 
 // Utility flag definitions
 
@@ -31,7 +32,7 @@
 namespace fst {
 
 int64 StrToInt64(const string &s, const string &src, size_t nline,
-                 bool allow_negative = false, bool *error) {
+                 bool allow_negative, bool *error) {
   int64 n;
   const char *cs = s.c_str();
   char *p;
@@ -59,15 +60,15 @@
 
 // Skips over input characters to align to 'align' bytes. Returns
 // false if can't align.
-bool AlignInput(istream &strm, int align) {
+bool AlignInput(istream &strm) {
   char c;
-  for (int i = 0; i < align; ++i) {
+  for (int i = 0; i < MappedFile::kArchAlignment; ++i) {
     int64 pos = strm.tellg();
     if (pos < 0) {
       LOG(ERROR) << "AlignInput: can't determine stream position";
       return false;
     }
-    if (pos % align == 0) break;
+    if (pos % MappedFile::kArchAlignment == 0) break;
     strm.read(&c, 1);
   }
   return true;
@@ -75,14 +76,14 @@
 
 // Write null output characters to align to 'align' bytes. Returns
 // false if can't align.
-bool AlignOutput(ostream &strm, int align) {
-  for (int i = 0; i < align; ++i) {
+bool AlignOutput(ostream &strm) {
+  for (int i = 0; i < MappedFile::kArchAlignment; ++i) {
     int64 pos = strm.tellp();
     if (pos < 0) {
       LOG(ERROR) << "AlignOutput: can't determine stream position";
       return false;
     }
-    if (pos % align == 0) break;
+    if (pos % MappedFile::kArchAlignment == 0) break;
     strm.write("", 1);
   }
   return true;
diff --git a/src/script/Makefile.am b/src/script/Makefile.am
index 00d52a5..649a30d 100644
--- a/src/script/Makefile.am
+++ b/src/script/Makefile.am
@@ -4,12 +4,12 @@
 lib_LTLIBRARIES = libfstscript.la
 libfstscript_la_SOURCES = arcsort.cc closure.cc compile.cc compose.cc \
 concat.cc connect.cc convert.cc decode.cc determinize.cc difference.cc \
-draw.cc encode.cc epsnormalize.cc equal.cc equivalent.cc fst-class.cc \
-info.cc intersect.cc invert.cc map.cc minimize.cc print.cc project.cc \
-prune.cc push.cc randequivalent.cc randgen.cc relabel.cc replace.cc \
-reverse.cc reweight.cc rmepsilon.cc script-impl.cc shortest-distance.cc \
-shortest-path.cc synchronize.cc text-io.cc topsort.cc union.cc \
-weight-class.cc verify.cc
+draw.cc encode.cc epsnormalize.cc equal.cc equivalent.cc \
+fst-class.cc info.cc intersect.cc invert.cc map.cc minimize.cc print.cc \
+project.cc prune.cc push.cc randequivalent.cc randgen.cc relabel.cc \
+replace.cc reverse.cc reweight.cc rmepsilon.cc script-impl.cc \
+shortest-distance.cc shortest-path.cc synchronize.cc text-io.cc topsort.cc \
+union.cc weight-class.cc verify.cc
 
-libfstscript_la_LDFLAGS = -version-info 0:0:0
+libfstscript_la_LDFLAGS = -version-info 1:0:0
 endif
diff --git a/src/script/Makefile.in b/src/script/Makefile.in
index bab82dc..87d8a9f 100644
--- a/src/script/Makefile.in
+++ b/src/script/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -37,10 +37,10 @@
 subdir = src/script
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -69,6 +69,12 @@
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(libdir)"
 LTLIBRARIES = $(lib_LTLIBRARIES)
 libfstscript_la_LIBADD =
@@ -136,6 +142,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -145,11 +152,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -164,6 +166,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -189,6 +192,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -223,7 +227,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -243,14 +246,14 @@
 @HAVE_SCRIPT_TRUE@lib_LTLIBRARIES = libfstscript.la
 @HAVE_SCRIPT_TRUE@libfstscript_la_SOURCES = arcsort.cc closure.cc compile.cc compose.cc \
 @HAVE_SCRIPT_TRUE@concat.cc connect.cc convert.cc decode.cc determinize.cc difference.cc \
-@HAVE_SCRIPT_TRUE@draw.cc encode.cc epsnormalize.cc equal.cc equivalent.cc fst-class.cc \
-@HAVE_SCRIPT_TRUE@info.cc intersect.cc invert.cc map.cc minimize.cc print.cc project.cc \
-@HAVE_SCRIPT_TRUE@prune.cc push.cc randequivalent.cc randgen.cc relabel.cc replace.cc \
-@HAVE_SCRIPT_TRUE@reverse.cc reweight.cc rmepsilon.cc script-impl.cc shortest-distance.cc \
-@HAVE_SCRIPT_TRUE@shortest-path.cc synchronize.cc text-io.cc topsort.cc union.cc \
-@HAVE_SCRIPT_TRUE@weight-class.cc verify.cc
+@HAVE_SCRIPT_TRUE@draw.cc encode.cc epsnormalize.cc equal.cc equivalent.cc \
+@HAVE_SCRIPT_TRUE@fst-class.cc info.cc intersect.cc invert.cc map.cc minimize.cc print.cc \
+@HAVE_SCRIPT_TRUE@project.cc prune.cc push.cc randequivalent.cc randgen.cc relabel.cc \
+@HAVE_SCRIPT_TRUE@replace.cc reverse.cc reweight.cc rmepsilon.cc script-impl.cc \
+@HAVE_SCRIPT_TRUE@shortest-distance.cc shortest-path.cc synchronize.cc text-io.cc topsort.cc \
+@HAVE_SCRIPT_TRUE@union.cc weight-class.cc verify.cc
 
-@HAVE_SCRIPT_TRUE@libfstscript_la_LDFLAGS = -version-info 0:0:0
+@HAVE_SCRIPT_TRUE@libfstscript_la_LDFLAGS = -version-info 1:0:0
 all: all-am
 
 .SUFFIXES:
@@ -316,7 +319,7 @@
 	  echo "rm -f \"$${dir}/so_locations\""; \
 	  rm -f "$${dir}/so_locations"; \
 	done
-libfstscript.la: $(libfstscript_la_OBJECTS) $(libfstscript_la_DEPENDENCIES) 
+libfstscript.la: $(libfstscript_la_OBJECTS) $(libfstscript_la_DEPENDENCIES) $(EXTRA_libfstscript_la_DEPENDENCIES) 
 	$(libfstscript_la_LINK) $(am_libfstscript_la_rpath) $(libfstscript_la_OBJECTS) $(libfstscript_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
@@ -493,10 +496,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/test/Makefile.in b/src/test/Makefile.in
index 00fe859..f86a1e6 100644
--- a/src/test/Makefile.in
+++ b/src/test/Makefile.in
@@ -1,9 +1,9 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.3 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -39,10 +39,10 @@
 subdir = src/test
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_icu.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
@@ -112,6 +112,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
 DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
@@ -121,11 +122,6 @@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 GREP = @GREP@
-ICU_CFLAGS = @ICU_CFLAGS@
-ICU_CONFIG = @ICU_CONFIG@
-ICU_CPPFLAGS = @ICU_CPPFLAGS@
-ICU_CXXFLAGS = @ICU_CXXFLAGS@
-ICU_LIBS = @ICU_LIBS@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -140,6 +136,7 @@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
 MKDIR_P = @MKDIR_P@
 NM = @NM@
 NMEDIT = @NMEDIT@
@@ -165,6 +162,7 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
@@ -199,7 +197,6 @@
 libfstdir = @libfstdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -263,13 +260,13 @@
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
-algo_test$(EXEEXT): $(algo_test_OBJECTS) $(algo_test_DEPENDENCIES) 
+algo_test$(EXEEXT): $(algo_test_OBJECTS) $(algo_test_DEPENDENCIES) $(EXTRA_algo_test_DEPENDENCIES) 
 	@rm -f algo_test$(EXEEXT)
 	$(CXXLINK) $(algo_test_OBJECTS) $(algo_test_LDADD) $(LIBS)
-fst_test$(EXEEXT): $(fst_test_OBJECTS) $(fst_test_DEPENDENCIES) 
+fst_test$(EXEEXT): $(fst_test_OBJECTS) $(fst_test_DEPENDENCIES) $(EXTRA_fst_test_DEPENDENCIES) 
 	@rm -f fst_test$(EXEEXT)
 	$(CXXLINK) $(fst_test_OBJECTS) $(fst_test_LDADD) $(LIBS)
-weight_test$(EXEEXT): $(weight_test_OBJECTS) $(weight_test_DEPENDENCIES) 
+weight_test$(EXEEXT): $(weight_test_OBJECTS) $(weight_test_DEPENDENCIES) $(EXTRA_weight_test_DEPENDENCIES) 
 	@rm -f weight_test$(EXEEXT)
 	$(CXXLINK) $(weight_test_OBJECTS) $(weight_test_LDADD) $(LIBS)
 
@@ -443,14 +440,15 @@
 	  fi; \
 	  dashes=`echo "$$dashes" | sed s/./=/g`; \
 	  if test "$$failed" -eq 0; then \
-	    echo "$$grn$$dashes"; \
+	    col="$$grn"; \
 	  else \
-	    echo "$$red$$dashes"; \
+	    col="$$red"; \
 	  fi; \
-	  echo "$$banner"; \
-	  test -z "$$skipped" || echo "$$skipped"; \
-	  test -z "$$report" || echo "$$report"; \
-	  echo "$$dashes$$std"; \
+	  echo "$${col}$$dashes$${std}"; \
+	  echo "$${col}$$banner$${std}"; \
+	  test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \
+	  test -z "$$report" || echo "$${col}$$report$${std}"; \
+	  echo "$${col}$$dashes$${std}"; \
 	  test "$$failed" -eq 0; \
 	else :; fi
 
@@ -500,10 +498,15 @@
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
diff --git a/src/test/fst_test.h b/src/test/fst_test.h
index 8f9dca0..fdc9209 100644
--- a/src/test/fst_test.h
+++ b/src/test/fst_test.h
@@ -51,6 +51,8 @@
     testfst_ = new F(vfst);
   }
 
+  explicit FstTester(F *testfst) : testfst_(testfst) { }
+
   ~FstTester() {
     delete testfst_;
   }
@@ -207,6 +209,7 @@
   template <class G>
   void TestIO(const G &fst) const {
     const string filename = FLAGS_tmpdir + "/test.fst";
+    const string aligned = FLAGS_tmpdir + "/aligned.fst";
     {
       // write/read
       CHECK(fst.Write(filename));
@@ -232,6 +235,44 @@
       delete hfst;
     }
 
+    {
+      // check mmaping by first writing the file with the aligned attribute set
+      {
+        ofstream ostr(aligned.c_str());
+        FstWriteOptions opts;
+        opts.source = aligned;
+        opts.align = true;
+        CHECK(fst.Write(ostr, opts));
+      }
+      ifstream istr(aligned.c_str());
+      FstReadOptions opts;
+      opts.mode = FstReadOptions::ReadMode("map");
+      opts.source = aligned;
+      G *gfst = G::Read(istr, opts);
+      CHECK(gfst);
+      TestBase(*gfst);
+      delete gfst;
+    }
+
+    // check mmaping of unaligned files to make sure it does not fail.
+    {
+      {
+        ofstream ostr(aligned.c_str());
+        FstWriteOptions opts;
+        opts.source = aligned;
+        opts.align = false;
+        CHECK(fst.Write(ostr, opts));
+      }
+      ifstream istr(aligned.c_str());
+      FstReadOptions opts;
+      opts.mode = FstReadOptions::ReadMode("map");
+      opts.source = aligned;
+      G *gfst = G::Read(istr, opts);
+      CHECK(gfst);
+      TestBase(*gfst);
+      delete gfst;
+    }
+
     // expanded write/read/test
     if (fst.Properties(kExpanded, false)) {
       ExpandedFst<Arc> *efst = ExpandedFst<Arc>::Read(filename);