/* ------------------------------------------------------------------
 * Copyright (C) 2008 PacketVideo
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
 * express or implied.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 * -------------------------------------------------------------------
 */
#include "pvmf_omx_audiodec_callbacks.h"
#include "pvmf_omx_audiodec_node.h"

/* Audio - 3 OMX callback related methods */

////////////////////////////////////////////////////////////////////////////////////////////////
EventHandlerThreadSafeCallbackAO_Audio::EventHandlerThreadSafeCallbackAO_Audio(void* aObserver,
        uint32 aDepth,
        const char* aAOname,
        int32 aPriority)
        : ThreadSafeCallbackAO(aObserver, aDepth, aAOname, aPriority)
{

    iMemoryPool = ThreadSafeMemPoolFixedChunkAllocator::Create(aDepth + 2);
    if (iMemoryPool == NULL)
    {
        PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger,
                        PVLOGMSG_ERR, (0, "EventHandlerTSCAO_Audio::CreateMemPool() Memory pool failed to allocate"));
    }
    // MUST do a dummy ALLOC HERE TO Create mempool. Otherwise the mempool will be
    // created in the 2nd thread and will fail to deallocate properly.

    OsclAny *dummy = iMemoryPool->allocate(sizeof(EventHandlerSpecificData_Audio));
    iMemoryPool->deallocate(dummy);
}

EventHandlerThreadSafeCallbackAO_Audio::~EventHandlerThreadSafeCallbackAO_Audio()
{
    if (iMemoryPool)
    {

        iMemoryPool->removeRef();
        iMemoryPool = NULL;
    }
}
OsclReturnCode EventHandlerThreadSafeCallbackAO_Audio::ProcessEvent(OsclAny* EventData)
{
    // In this case, ProcessEvent calls the method of the primary test AO to process the Event
    if (iObserver != NULL)
    {
        PVMFOMXAudioDecNode* ptr = (PVMFOMXAudioDecNode*) iObserver;

        ptr->ProcessCallbackEventHandler_MultiThreaded(EventData);

    }
    return OsclSuccess;
}

// We override the Run to process multiple (i.e. all in the queue) events in one Run

void EventHandlerThreadSafeCallbackAO_Audio::Run()
{
    PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EventHandlerThreadSafeCallbackAO_Audio::Run() In"));

    OsclAny *P; // parameter to dequeue
    OsclReturnCode status = OsclSuccess;

    do
    {


        P = DeQueue(status);


        if ((status == OsclSuccess) || (status == OsclPending))
        {
            PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EventHandlerThreadSafeCallbackAO_Audio::Run() - Calling Process Event"));
            ProcessEvent(P);
        }
        else
        {
            PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EventHandlerThreadSafeCallbackAO_Audio::Run() - could not dequeue event data"));
        }


        // it is possible that an event arrives between dequeueing the last event and this point.
        // If this is the case, we will be rescheduled and process the event
        // in the next RunL


    }
    while (status == OsclSuccess);
    // if the status is "OsclPending" there were no more events in the queue
    // (if another event arrived in the meanwhile, AO will be rescheduled)


    PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EventHandlerThreadSafeCallbackAO_Audio::Run() Out"));
}

// same as base-class DeQueue method, except no RunIfNotReady/PendForExec is called (since all events are processed in a loop)
// (i.e. PendForExec control is done in the loop in Run)
OsclAny* EventHandlerThreadSafeCallbackAO_Audio::DeQueue(OsclReturnCode &stat)
{
    OsclAny *pData;
    OsclProcStatus::eOsclProcError sema_status;

    stat = OsclSuccess;

    // Protect the queue while accessing it:
    Mutex.Lock();

    if (Q->NumElem == 0)
    {
        // nothing to de-queue
        stat = OsclFailure;
        PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EventHandlerThreadSafeCallbackAO_Audio::DeQueue() - No events in the queue - return ()"));
        Mutex.Unlock();

        return NULL;
    }

    pData = (Q->pFirst[Q->index_out]).pData;

    Q->index_out++;
    // roll-over the index
    if (Q->index_out == Q->MaxNumElements)
        Q->index_out = 0;

    Q->NumElem--;
    // check if there is need to call waitforevent
    if ((Q->NumElem) == 0)
    {
        PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EventHandlerThreadSafeCallbackAO_Audio::RunL() - No more events, call WaitForEvent()"));
        PendForExec();
        stat = OsclPending; // let the RunL know that the last event was pulled out of the queue
        // so that it can get out of the loop
    }

    //release queue access
    Mutex.Unlock();

    // Signal the semaphore that controls the remote thread.
    // The remote thread might be blocked and waiting for an event to be processed in case the event queue is full
    sema_status = RemoteThreadCtrlSema.Signal();
    if (sema_status != OsclProcStatus::SUCCESS_ERROR)
    {
        stat = OsclFailure;
        return NULL;
    }

    return pData;
}


////////////////////////////////////////////////////////////////////////////////////////////////
EmptyBufferDoneThreadSafeCallbackAO_Audio::EmptyBufferDoneThreadSafeCallbackAO_Audio(void* aObserver,
        uint32 aDepth,
        const char* aAOname,
        int32 aPriority)
        : ThreadSafeCallbackAO(aObserver, aDepth, aAOname, aPriority)
{

    iMemoryPool = ThreadSafeMemPoolFixedChunkAllocator::Create(aDepth + 2);
    if (iMemoryPool == NULL)
    {
        PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger,
                        PVLOGMSG_ERR, (0, "EventHandlerTSCAO_Audio::CreateMemPool() Memory pool failed to allocate"));

    }
    // MUST do a dummy ALLOC HERE TO Create mempool. Otherwise the mempool will be
    // created in the 2nd thread and will fail to deallocate properly.

    OsclAny *dummy = iMemoryPool->allocate(sizeof(EmptyBufferDoneSpecificData_Audio));
    iMemoryPool->deallocate(dummy);
}

EmptyBufferDoneThreadSafeCallbackAO_Audio::~EmptyBufferDoneThreadSafeCallbackAO_Audio()
{
    if (iMemoryPool)
    {

        iMemoryPool->removeRef();
        iMemoryPool = NULL;
    }

}
OsclReturnCode EmptyBufferDoneThreadSafeCallbackAO_Audio::ProcessEvent(OsclAny* EventData)
{
    // In this case, ProcessEvent calls the method of the primary test AO to process the Event
    if (iObserver != NULL)
    {
        PVMFOMXAudioDecNode* ptr = (PVMFOMXAudioDecNode *) iObserver;

        ptr->ProcessCallbackEmptyBufferDone_MultiThreaded(EventData);

    }
    return OsclSuccess;
}

// We override the Run to process multiple (i.e. all in the queue) events in one Run

void EmptyBufferDoneThreadSafeCallbackAO_Audio::Run()
{
    PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EmptyBufferDoneThreadSafeCallbackAO_Audio::Run() In"));

    OsclAny *P; // parameter to dequeue
    OsclReturnCode status = OsclSuccess;

    do
    {


        P = DeQueue(status);


        if ((status == OsclSuccess) || (status == OsclPending))
        {
            PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EmptyBufferDoneThreadSafeCallbackAO_Audio::Run() - Calling Process Event"));
            ProcessEvent(P);
        }
        else
        {
            PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EmptyBufferDoneThreadSafeCallbackAO_Audio::Run() - could not dequeue event data"));
        }


        // it is possible that an event arrives between dequeueing the last event and this point.
        // If this is the case, we will be rescheduled and process the event
        // in the next RunL


    }
    while (status == OsclSuccess);
    // if the status is "OsclPending" there were no more events in the queue
    // (if another event arrived in the meanwhile, AO will be rescheduled)


    PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EmptyBufferDoneThreadSafeCallbackAO_Audio::Run() Out"));
}

// same as base-class DeQueue method, except no RunIfNotReady/PendForExec is called (since all events are processed in a loop)
// (i.e. PendForExec control is done in the loop in Run)
OsclAny* EmptyBufferDoneThreadSafeCallbackAO_Audio::DeQueue(OsclReturnCode &stat)
{
    OsclAny *pData;
    OsclProcStatus::eOsclProcError sema_status;

    stat = OsclSuccess;

    // Protect the queue while accessing it:
    Mutex.Lock();

    if (Q->NumElem == 0)
    {
        // nothing to de-queue
        stat = OsclFailure;
        PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EmptyBufferDoneThreadSafeCallbackAO_Audio::DeQueue() - No events in the queue - return ()"));
        Mutex.Unlock();

        return NULL;
    }

    pData = (Q->pFirst[Q->index_out]).pData;

    Q->index_out++;
    // roll-over the index
    if (Q->index_out == Q->MaxNumElements)
        Q->index_out = 0;

    Q->NumElem--;
    // check if there is need to call waitforevent
    if ((Q->NumElem) == 0)
    {
        PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "EmptyBufferDoneThreadSafeCallbackAO_Audio::RunL() - No more events, call WaitForEvent()"));
        PendForExec();
        stat = OsclPending; // let the RunL know that the last event was pulled out of the queue
        // so that it can get out of the loop
    }

    //release queue access
    Mutex.Unlock();

    // Signal the semaphore that controls the remote thread.
    // The remote thread might be blocked and waiting for an event to be processed in case the event queue is full
    sema_status = RemoteThreadCtrlSema.Signal();
    if (sema_status != OsclProcStatus::SUCCESS_ERROR)
    {
        stat = OsclFailure;
        return NULL;
    }

    return pData;
}


////////////////////////////////////////////////////////////////////////////////////////////////
FillBufferDoneThreadSafeCallbackAO_Audio::FillBufferDoneThreadSafeCallbackAO_Audio(void* aObserver,
        uint32 aDepth,
        const char* aAOname,
        int32 aPriority)
        : ThreadSafeCallbackAO(aObserver, aDepth, aAOname, aPriority)
{

    iMemoryPool = ThreadSafeMemPoolFixedChunkAllocator::Create(aDepth + 2);
    if (iMemoryPool == NULL)
    {
        PVLOGGER_LOGMSG(PVLOGMSG_INST_HLDBG, iLogger,
                        PVLOGMSG_ERR, (0, "EventHandlerTSCAO_Audio::CreateMemPool() Memory pool failed to allocate"));
    }
    // MUST do a dummy ALLOC HERE TO Create mempool. Otherwise the mempool will be
    // created in the 2nd thread and will fail to deallocate properly.

    OsclAny *dummy = iMemoryPool->allocate(sizeof(FillBufferDoneSpecificData_Audio));
    iMemoryPool->deallocate(dummy);
}

FillBufferDoneThreadSafeCallbackAO_Audio::~FillBufferDoneThreadSafeCallbackAO_Audio()
{
    if (iMemoryPool)
    {
        iMemoryPool->removeRef();
        iMemoryPool = NULL;
    }
}

OsclReturnCode FillBufferDoneThreadSafeCallbackAO_Audio::ProcessEvent(OsclAny* EventData)
{
    // In this case, ProcessEvent calls the method of the primary test AO to process the Event
    if (iObserver != NULL)
    {
        PVMFOMXAudioDecNode* ptr = (PVMFOMXAudioDecNode*) iObserver;

        ptr->ProcessCallbackFillBufferDone_MultiThreaded(EventData);

    }
    return OsclSuccess;
}

// We override the Run to process multiple (i.e. all in the queue) events in one Run

void FillBufferDoneThreadSafeCallbackAO_Audio::Run()
{
    PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "FillBufferDoneThreadSafeCallbackAO_Audio::Run() In"));

    OsclAny *P; // parameter to dequeue
    OsclReturnCode status;
    uint32 num_queue_elements;

    do
    {


        P = DeQueue(status);


        if ((status == OsclSuccess) || (status == OsclPending))
        {
            PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "FillBufferDoneThreadSafeCallbackAO_Audio::Run() - Calling Process Event"));
            ProcessEvent(P);
        }
        else
        {
            PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "FillBufferDoneThreadSafeCallbackAO_Audio::Run() - could not dequeue event data"));
        }


        // it is possible that an event arrives between dequeueing the last event and this point.
        // If this is the case, we will be rescheduled and process the event
        // in the next RunL


    }
    while (status == OsclSuccess);
    // if the status is "OsclPending" there were no more events in the queue
    // (if another event arrived in the meanwhile, AO will be rescheduled)


    PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "FillBufferDoneThreadSafeCallbackAO_Audio::Run() Out"));
}

// same as base-class DeQueue method, except no RunIfNotReady/PendForExec is called (since all events are processed in a loop)
// (i.e. PendForExec control is done in the loop in Run)
OsclAny* FillBufferDoneThreadSafeCallbackAO_Audio::DeQueue(OsclReturnCode &stat)
{
    OsclAny *pData;
    OsclProcStatus::eOsclProcError sema_status;

    stat = OsclSuccess;

    // Protect the queue while accessing it:
    Mutex.Lock();

    if (Q->NumElem == 0)
    {
        // nothing to de-queue
        stat = OsclFailure;
        PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "FillBufferDoneThreadSafeCallbackAO_Audio::DeQueue() - No events in the queue - return ()"));
        Mutex.Unlock();

        return NULL;
    }

    pData = (Q->pFirst[Q->index_out]).pData;

    Q->index_out++;
    // roll-over the index
    if (Q->index_out == Q->MaxNumElements)
        Q->index_out = 0;

    Q->NumElem--;
    // check if there is need to call waitforevent
    if ((Q->NumElem) == 0)
    {
        PVLOGGER_LOGMSG(PVLOGMSG_INST_LLDBG, iLogger, PVLOGMSG_STACK_TRACE, (0, "FillBufferDoneThreadSafeCallbackAO_Audio::RunL() - No more events, call WaitForEvent()"));
        PendForExec();
        stat = OsclPending; // let the RunL know that the last event was pulled out of the queue
        // so that it can get out of the loop
    }

    //release queue access
    Mutex.Unlock();

    // Signal the semaphore that controls the remote thread.
    // The remote thread might be blocked and waiting for an event to be processed in case the event queue is full
    sema_status = RemoteThreadCtrlSema.Signal();
    if (sema_status != OsclProcStatus::SUCCESS_ERROR)
    {
        stat = OsclFailure;
        return NULL;
    }

    return pData;
}