src/intel/genxml/gen75.xml

<genxml name="HSW" gen="7.5">
  <enum name="3D_Prim_Topo_Type" prefix="3DPRIM">
    <value name="POINTLIST" value="1"/>
    <value name="LINELIST" value="2"/>
    <value name="LINESTRIP" value="3"/>
    <value name="TRILIST" value="4"/>
    <value name="TRISTRIP" value="5"/>
    <value name="TRIFAN" value="6"/>
    <value name="QUADLIST" value="7"/>
    <value name="QUADSTRIP" value="8"/>
    <value name="LINELIST_ADJ" value="9"/>
    <value name="LINESTRIP_ADJ" value="10"/>
    <value name="TRILIST_ADJ" value="11"/>
    <value name="TRISTRIP_ADJ" value="12"/>
    <value name="TRISTRIP_REVERSE" value="13"/>
    <value name="POLYGON" value="14"/>
    <value name="RECTLIST" value="15"/>
    <value name="LINELOOP" value="16"/>
    <value name="POINTLIST _BF" value="17"/>
    <value name="LINESTRIP_CONT" value="18"/>
    <value name="LINESTRIP_BF" value="19"/>
    <value name="LINESTRIP_CONT_BF" value="20"/>
    <value name="TRIFAN_NOSTIPPLE" value="22"/>
    <value name="PATCHLIST_1" value="32"/>
    <value name="PATCHLIST_2" value="33"/>
    <value name="PATCHLIST_3" value="34"/>
    <value name="PATCHLIST_4" value="35"/>
    <value name="PATCHLIST_5" value="36"/>
    <value name="PATCHLIST_6" value="37"/>
    <value name="PATCHLIST_7" value="38"/>
    <value name="PATCHLIST_8" value="39"/>
    <value name="PATCHLIST_9" value="40"/>
    <value name="PATCHLIST_10" value="41"/>
    <value name="PATCHLIST_11" value="42"/>
    <value name="PATCHLIST_12" value="43"/>
    <value name="PATCHLIST_13" value="44"/>
    <value name="PATCHLIST_14" value="45"/>
    <value name="PATCHLIST_15" value="46"/>
    <value name="PATCHLIST_16" value="47"/>
    <value name="PATCHLIST_17" value="48"/>
    <value name="PATCHLIST_18" value="49"/>
    <value name="PATCHLIST_19" value="50"/>
    <value name="PATCHLIST_20" value="51"/>
    <value name="PATCHLIST_21" value="52"/>
    <value name="PATCHLIST_22" value="53"/>
    <value name="PATCHLIST_23" value="54"/>
    <value name="PATCHLIST_24" value="55"/>
    <value name="PATCHLIST_25" value="56"/>
    <value name="PATCHLIST_26" value="57"/>
    <value name="PATCHLIST_27" value="58"/>
    <value name="PATCHLIST_28" value="59"/>
    <value name="PATCHLIST_29" value="60"/>
    <value name="PATCHLIST_30" value="61"/>
    <value name="PATCHLIST_31" value="62"/>
    <value name="PATCHLIST_32" value="63"/>
  </enum>

  <enum name="3D_Vertex_Component_Control" prefix="VFCOMP">
    <value name="NOSTORE" value="0"/>
    <value name="STORE_SRC" value="1"/>
    <value name="STORE_0" value="2"/>
    <value name="STORE_1_FP" value="3"/>
    <value name="STORE_1_INT" value="4"/>
    <value name="STORE_VID" value="5"/>
    <value name="STORE_IID" value="6"/>
    <value name="STORE_PID" value="7"/>
  </enum>

  <enum name="3D_Stencil_Operation" prefix="STENCILOP">
    <value name="KEEP" value="0"/>
    <value name="ZERO" value="1"/>
    <value name="REPLACE" value="2"/>
    <value name="INCRSAT" value="3"/>
    <value name="DECRSAT" value="4"/>
    <value name="INCR" value="5"/>
    <value name="DECR" value="6"/>
    <value name="INVERT" value="7"/>
  </enum>

  <enum name="3D_Color_Buffer_Blend_Factor" prefix="BLENDFACTOR">
    <value name="ONE" value="1"/>
    <value name="SRC_COLOR" value="2"/>
    <value name="SRC_ALPHA" value="3"/>
    <value name="DST_ALPHA" value="4"/>
    <value name="DST_COLOR" value="5"/>
    <value name="SRC_ALPHA_SATURATE" value="6"/>
    <value name="CONST_COLOR" value="7"/>
    <value name="CONST_ALPHA" value="8"/>
    <value name="SRC1_COLOR" value="9"/>
    <value name="SRC1_ALPHA" value="10"/>
    <value name="ZERO" value="17"/>
    <value name="INV_SRC_COLOR" value="18"/>
    <value name="INV_SRC_ALPHA" value="19"/>
    <value name="INV_DST_ALPHA" value="20"/>
    <value name="INV_DST_COLOR" value="21"/>
    <value name="INV_CONST_COLOR" value="23"/>
    <value name="INV_CONST_ALPHA" value="24"/>
    <value name="INV_SRC1_COLOR" value="25"/>
    <value name="INV_SRC1_ALPHA" value="26"/>
  </enum>

  <enum name="3D_Color_Buffer_Blend_Function" prefix="BLENDFUNCTION">
    <value name="ADD" value="0"/>
    <value name="SUBTRACT" value="1"/>
    <value name="REVERSE_SUBTRACT" value="2"/>
    <value name="MIN" value="3"/>
    <value name="MAX" value="4"/>
  </enum>

  <enum name="3D_Compare_Function" prefix="COMPAREFUNCTION">
    <value name="ALWAYS" value="0"/>
    <value name="NEVER" value="1"/>
    <value name="LESS" value="2"/>
    <value name="EQUAL" value="3"/>
    <value name="LEQUAL" value="4"/>
    <value name="GREATER" value="5"/>
    <value name="NOTEQUAL" value="6"/>
    <value name="GEQUAL" value="7"/>
  </enum>

  <enum name="3D_Logic_Op_Function" prefix="LOGICOP">
    <value name="CLEAR" value="0"/>
    <value name="NOR" value="1"/>
    <value name="AND_INVERTED" value="2"/>
    <value name="COPY_INVERTED" value="3"/>
    <value name="AND_REVERSE" value="4"/>
    <value name="INVERT" value="5"/>
    <value name="XOR" value="6"/>
    <value name="NAND" value="7"/>
    <value name="AND" value="8"/>
    <value name="EQUIV" value="9"/>
    <value name="NOOP" value="10"/>
    <value name="OR_INVERTED" value="11"/>
    <value name="COPY" value="12"/>
    <value name="OR_REVERSE" value="13"/>
    <value name="OR" value="14"/>
    <value name="SET" value="15"/>
  </enum>

  <enum name="SURFACE_FORMAT" prefix="SF">
    <value name="R32G32B32A32_FLOAT" value="0"/>
    <value name="R32G32B32A32_SINT" value="1"/>
    <value name="R32G32B32A32_UINT" value="2"/>
    <value name="R32G32B32A32_UNORM" value="3"/>
    <value name="R32G32B32A32_SNORM" value="4"/>
    <value name="R64G64_FLOAT" value="5"/>
    <value name="R32G32B32X32_FLOAT" value="6"/>
    <value name="R32G32B32A32_SSCALED" value="7"/>
    <value name="R32G32B32A32_USCALED" value="8"/>
    <value name="R32G32B32A32_SFIXED" value="32"/>
    <value name="R64G64_PASSTHRU" value="33"/>
    <value name="R32G32B32_FLOAT" value="64"/>
    <value name="R32G32B32_SINT" value="65"/>
    <value name="R32G32B32_UINT" value="66"/>
    <value name="R32G32B32_UNORM" value="67"/>
    <value name="R32G32B32_SNORM" value="68"/>
    <value name="R32G32B32_SSCALED" value="69"/>
    <value name="R32G32B32_USCALED" value="70"/>
    <value name="R32G32B32_SFIXED" value="80"/>
    <value name="R16G16B16A16_UNORM" value="128"/>
    <value name="R16G16B16A16_SNORM" value="129"/>
    <value name="R16G16B16A16_SINT" value="130"/>
    <value name="R16G16B16A16_UINT" value="131"/>
    <value name="R16G16B16A16_FLOAT" value="132"/>
    <value name="R32G32_FLOAT" value="133"/>
    <value name="R32G32_SINT" value="134"/>
    <value name="R32G32_UINT" value="135"/>
    <value name="R32_FLOAT_X8X24_TYPELESS" value="136"/>
    <value name="X32_TYPELESS_G8X24_UINT" value="137"/>
    <value name="L32A32_FLOAT" value="138"/>
    <value name="R32G32_UNORM" value="139"/>
    <value name="R32G32_SNORM" value="140"/>
    <value name="R64_FLOAT" value="141"/>
    <value name="R16G16B16X16_UNORM" value="142"/>
    <value name="R16G16B16X16_FLOAT" value="143"/>
    <value name="A32X32_FLOAT" value="144"/>
    <value name="L32X32_FLOAT" value="145"/>
    <value name="I32X32_FLOAT" value="146"/>
    <value name="R16G16B16A16_SSCALED" value="147"/>
    <value name="R16G16B16A16_USCALED" value="148"/>
    <value name="R32G32_SSCALED" value="149"/>
    <value name="R32G32_USCALED" value="150"/>
    <value name="R32G32_SFIXED" value="160"/>
    <value name="R64_PASSTHRU" value="161"/>
    <value name="B8G8R8A8_UNORM" value="192"/>
    <value name="B8G8R8A8_UNORM_SRGB" value="193"/>
    <value name="R10G10B10A2_UNORM" value="194"/>
    <value name="R10G10B10A2_UNORM_SRGB" value="195"/>
    <value name="R10G10B10A2_UINT" value="196"/>
    <value name="R10G10B10_SNORM_A2_UNORM" value="197"/>
    <value name="R8G8B8A8_UNORM" value="199"/>
    <value name="R8G8B8A8_UNORM_SRGB" value="200"/>
    <value name="R8G8B8A8_SNORM" value="201"/>
    <value name="R8G8B8A8_SINT" value="202"/>
    <value name="R8G8B8A8_UINT" value="203"/>
    <value name="R16G16_UNORM" value="204"/>
    <value name="R16G16_SNORM" value="205"/>
    <value name="R16G16_SINT" value="206"/>
    <value name="R16G16_UINT" value="207"/>
    <value name="R16G16_FLOAT" value="208"/>
    <value name="B10G10R10A2_UNORM" value="209"/>
    <value name="B10G10R10A2_UNORM_SRGB" value="210"/>
    <value name="R11G11B10_FLOAT" value="211"/>
    <value name="R32_SINT" value="214"/>
    <value name="R32_UINT" value="215"/>
    <value name="R32_FLOAT" value="216"/>
    <value name="R24_UNORM_X8_TYPELESS" value="217"/>
    <value name="X24_TYPELESS_G8_UINT" value="218"/>
    <value name="L32_UNORM" value="221"/>
    <value name="A32_UNORM" value="222"/>
    <value name="L16A16_UNORM" value="223"/>
    <value name="I24X8_UNORM" value="224"/>
    <value name="L24X8_UNORM" value="225"/>
    <value name="A24X8_UNORM" value="226"/>
    <value name="I32_FLOAT" value="227"/>
    <value name="L32_FLOAT" value="228"/>
    <value name="A32_FLOAT" value="229"/>
    <value name="X8B8_UNORM_G8R8_SNORM" value="230"/>
    <value name="A8X8_UNORM_G8R8_SNORM" value="231"/>
    <value name="B8X8_UNORM_G8R8_SNORM" value="232"/>
    <value name="B8G8R8X8_UNORM" value="233"/>
    <value name="B8G8R8X8_UNORM_SRGB" value="234"/>
    <value name="R8G8B8X8_UNORM" value="235"/>
    <value name="R8G8B8X8_UNORM_SRGB" value="236"/>
    <value name="R9G9B9E5_SHAREDEXP" value="237"/>
    <value name="B10G10R10X2_UNORM" value="238"/>
    <value name="L16A16_FLOAT" value="240"/>
    <value name="R32_UNORM" value="241"/>
    <value name="R32_SNORM" value="242"/>
    <value name="R10G10B10X2_USCALED" value="243"/>
    <value name="R8G8B8A8_SSCALED" value="244"/>
    <value name="R8G8B8A8_USCALED" value="245"/>
    <value name="R16G16_SSCALED" value="246"/>
    <value name="R16G16_USCALED" value="247"/>
    <value name="R32_SSCALED" value="248"/>
    <value name="R32_USCALED" value="249"/>
    <value name="B5G6R5_UNORM" value="256"/>
    <value name="B5G6R5_UNORM_SRGB" value="257"/>
    <value name="B5G5R5A1_UNORM" value="258"/>
    <value name="B5G5R5A1_UNORM_SRGB" value="259"/>
    <value name="B4G4R4A4_UNORM" value="260"/>
    <value name="B4G4R4A4_UNORM_SRGB" value="261"/>
    <value name="R8G8_UNORM" value="262"/>
    <value name="R8G8_SNORM" value="263"/>
    <value name="R8G8_SINT" value="264"/>
    <value name="R8G8_UINT" value="265"/>
    <value name="R16_UNORM" value="266"/>
    <value name="R16_SNORM" value="267"/>
    <value name="R16_SINT" value="268"/>
    <value name="R16_UINT" value="269"/>
    <value name="R16_FLOAT" value="270"/>
    <value name="A8P8_UNORM_PALETTE0" value="271"/>
    <value name="A8P8_UNORM_PALETTE1" value="272"/>
    <value name="I16_UNORM" value="273"/>
    <value name="L16_UNORM" value="274"/>
    <value name="A16_UNORM" value="275"/>
    <value name="L8A8_UNORM" value="276"/>
    <value name="I16_FLOAT" value="277"/>
    <value name="L16_FLOAT" value="278"/>
    <value name="A16_FLOAT" value="279"/>
    <value name="L8A8_UNORM_SRGB" value="280"/>
    <value name="R5G5_SNORM_B6_UNORM" value="281"/>
    <value name="B5G5R5X1_UNORM" value="282"/>
    <value name="B5G5R5X1_UNORM_SRGB" value="283"/>
    <value name="R8G8_SSCALED" value="284"/>
    <value name="R8G8_USCALED" value="285"/>
    <value name="R16_SSCALED" value="286"/>
    <value name="R16_USCALED" value="287"/>
    <value name="P8A8_UNORM_PALETTE0" value="290"/>
    <value name="P8A8_UNORM_PALETTE1" value="291"/>
    <value name="A1B5G5R5_UNORM" value="292"/>
    <value name="A4B4G4R4_UNORM" value="293"/>
    <value name="L8A8_UINT" value="294"/>
    <value name="L8A8_SINT" value="295"/>
    <value name="R8_UNORM" value="320"/>
    <value name="R8_SNORM" value="321"/>
    <value name="R8_SINT" value="322"/>
    <value name="R8_UINT" value="323"/>
    <value name="A8_UNORM" value="324"/>
    <value name="I8_UNORM" value="325"/>
    <value name="L8_UNORM" value="326"/>
    <value name="P4A4_UNORM_PALETTE0" value="327"/>
    <value name="A4P4_UNORM_PALETTE0" value="328"/>
    <value name="R8_SSCALED" value="329"/>
    <value name="R8_USCALED" value="330"/>
    <value name="P8_UNORM_PALETTE0" value="331"/>
    <value name="L8_UNORM_SRGB" value="332"/>
    <value name="P8_UNORM_PALETTE1" value="333"/>
    <value name="P4A4_UNORM_PALETTE1" value="334"/>
    <value name="A4P4_UNORM_PALETTE1" value="335"/>
    <value name="Y8_UNORM" value="336"/>
    <value name="L8_UINT" value="338"/>
    <value name="L8_SINT" value="339"/>
    <value name="I8_UINT" value="340"/>
    <value name="I8_SINT" value="341"/>
    <value name="DXT1_RGB_SRGB" value="384"/>
    <value name="R1_UNORM" value="385"/>
    <value name="YCRCB_NORMAL" value="386"/>
    <value name="YCRCB_SWAPUVY" value="387"/>
    <value name="P2_UNORM_PALETTE0" value="388"/>
    <value name="P2_UNORM_PALETTE1" value="389"/>
    <value name="BC1_UNORM" value="390"/>
    <value name="BC2_UNORM" value="391"/>
    <value name="BC3_UNORM" value="392"/>
    <value name="BC4_UNORM" value="393"/>
    <value name="BC5_UNORM" value="394"/>
    <value name="BC1_UNORM_SRGB" value="395"/>
    <value name="BC2_UNORM_SRGB" value="396"/>
    <value name="BC3_UNORM_SRGB" value="397"/>
    <value name="MONO8" value="398"/>
    <value name="YCRCB_SWAPUV" value="399"/>
    <value name="YCRCB_SWAPY" value="400"/>
    <value name="DXT1_RGB" value="401"/>
    <value name="FXT1" value="402"/>
    <value name="R8G8B8_UNORM" value="403"/>
    <value name="R8G8B8_SNORM" value="404"/>
    <value name="R8G8B8_SSCALED" value="405"/>
    <value name="R8G8B8_USCALED" value="406"/>
    <value name="R64G64B64A64_FLOAT" value="407"/>
    <value name="R64G64B64_FLOAT" value="408"/>
    <value name="BC4_SNORM" value="409"/>
    <value name="BC5_SNORM" value="410"/>
    <value name="R16G16B16_FLOAT" value="411"/>
    <value name="R16G16B16_UNORM" value="412"/>
    <value name="R16G16B16_SNORM" value="413"/>
    <value name="R16G16B16_SSCALED" value="414"/>
    <value name="R16G16B16_USCALED" value="415"/>
    <value name="BC6H_SF16" value="417"/>
    <value name="BC7_UNORM" value="418"/>
    <value name="BC7_UNORM_SRGB" value="419"/>
    <value name="BC6H_UF16" value="420"/>
    <value name="PLANAR_420_8" value="421"/>
    <value name="R8G8B8_UNORM_SRGB" value="424"/>
    <value name="ETC1_RGB8" value="425"/>
    <value name="ETC2_RGB8" value="426"/>
    <value name="EAC_R11" value="427"/>
    <value name="EAC_RG11" value="428"/>
    <value name="EAC_SIGNED_R11" value="429"/>
    <value name="EAC_SIGNED_RG11" value="430"/>
    <value name="ETC2_SRGB8" value="431"/>
    <value name="R16G16B16_UINT" value="432"/>
    <value name="R16G16B16_SINT" value="433"/>
    <value name="R32_SFIXED" value="434"/>
    <value name="R10G10B10A2_SNORM" value="435"/>
    <value name="R10G10B10A2_USCALED" value="436"/>
    <value name="R10G10B10A2_SSCALED" value="437"/>
    <value name="R10G10B10A2_SINT" value="438"/>
    <value name="B10G10R10A2_SNORM" value="439"/>
    <value name="B10G10R10A2_USCALED" value="440"/>
    <value name="B10G10R10A2_SSCALED" value="441"/>
    <value name="B10G10R10A2_UINT" value="442"/>
    <value name="B10G10R10A2_SINT" value="443"/>
    <value name="R64G64B64A64_PASSTHRU" value="444"/>
    <value name="R64G64B64_PASSTHRU" value="445"/>
    <value name="ETC2_RGB8_PTA" value="448"/>
    <value name="ETC2_SRGB8_PTA" value="449"/>
    <value name="ETC2_EAC_RGBA8" value="450"/>
    <value name="ETC2_EAC_SRGB8_A8" value="451"/>
    <value name="R8G8B8_UINT" value="456"/>
    <value name="R8G8B8_SINT" value="457"/>
    <value name="RAW" value="511"/>
  </enum>

  <enum name="Texture Coordinate Mode" prefix="TCM">
    <value name="WRAP" value="0"/>
    <value name="MIRROR" value="1"/>
    <value name="CLAMP" value="2"/>
    <value name="CUBE" value="3"/>
    <value name="CLAMP_BORDER" value="4"/>
    <value name="MIRROR_ONCE" value="5"/>
  </enum>

  <struct name="MEMORY_OBJECT_CONTROL_STATE" length="1">
    <field name="LLC/eLLC Cacheability Control (LLCCC)" start="1" end="2" type="uint"/>
    <field name="L3 Cacheability Control (L3CC)" start="0" end="0" type="uint"/>
  </struct>

  <struct name="3DSTATE_CONSTANT_BODY" length="6">
    <field name="Constant Buffer 1 Read Length" start="16" end="31" type="uint"/>
    <field name="Constant Buffer 0 Read Length" start="0" end="15" type="uint"/>
    <field name="Constant Buffer 3 Read Length" start="48" end="63" type="uint"/>
    <field name="Constant Buffer 2 Read Length" start="32" end="47" type="uint"/>
    <field name="Pointer To Constant Buffer 0" start="69" end="95" type="address"/>
    <field name="Constant Buffer Object Control State" start="64" end="68" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Pointer To Constant Buffer 1" start="101" end="127" type="address"/>
    <field name="Pointer To Constant Buffer 2" start="133" end="159" type="address"/>
    <field name="Pointer To Constant Buffer 3" start="165" end="191" type="address"/>
  </struct>

  <struct name="BINDING_TABLE_EDIT_ENTRY" length="1">
    <field name="Binding Table Index" start="16" end="23" type="uint"/>
    <field name="Surface State Pointer" start="0" end="15" type="offset"/>
  </struct>

  <struct name="GATHER_CONSTANT_ENTRY" length="1">
    <field name="Constant Buffer Offset" start="8" end="15" type="offset"/>
    <field name="Channel Mask" start="4" end="7" type="uint"/>
    <field name="Binding Table Index Offset" start="0" end="3" type="uint"/>
  </struct>

  <struct name="VERTEX_BUFFER_STATE" length="4">
    <field name="Vertex Buffer Index" start="26" end="31" type="uint"/>
    <field name="Buffer Access Type" start="20" end="20" type="uint">
      <value name="VERTEXDATA" value="0"/>
      <value name="INSTANCEDATA" value="1"/>
    </field>
    <field name="Vertex Buffer Memory Object Control State" start="16" end="19" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Vertex Buffer MOCS" start="16" end="19" type="uint"/>
    <field name="Address Modify Enable" start="14" end="14" type="bool"/>
    <field name="Null Vertex Buffer" start="13" end="13" type="bool"/>
    <field name="Vertex Fetch Invalidate" start="12" end="12" type="bool" default="0"/>
    <field name="Buffer Pitch" start="0" end="11" type="uint"/>
    <field name="Buffer Starting Address" start="32" end="63" type="address"/>
    <field name="End Address" start="64" end="95" type="address"/>
    <field name="Instance Data Step Rate" start="96" end="127" type="uint"/>
  </struct>

  <struct name="VERTEX_ELEMENT_STATE" length="2">
    <field name="Vertex Buffer Index" start="26" end="31" type="uint"/>
    <field name="Valid" start="25" end="25" type="bool"/>
    <field name="Source Element Format" start="16" end="24" type="SURFACE_FORMAT"/>
    <field name="Edge Flag Enable" start="15" end="15" type="bool"/>
    <field name="Source Element Offset" start="0" end="11" type="uint"/>
    <field name="Component 0 Control" start="60" end="62" type="3D_Vertex_Component_Control"/>
    <field name="Component 1 Control" start="56" end="58" type="3D_Vertex_Component_Control"/>
    <field name="Component 2 Control" start="52" end="54" type="3D_Vertex_Component_Control"/>
    <field name="Component 3 Control" start="48" end="50" type="3D_Vertex_Component_Control"/>
  </struct>

  <struct name="SO_DECL" length="1">
    <field name="Output Buffer Slot" start="12" end="13" type="uint"/>
    <field name="Hole Flag" start="11" end="11" type="uint"/>
    <field name="Register Index" start="4" end="9" type="uint"/>
    <field name="Component Mask" start="0" end="3" type="uint" default="0"/>
  </struct>

  <struct name="SO_DECL_ENTRY" length="2">
    <field name="Stream 3 Decl" start="48" end="63" type="SO_DECL"/>
    <field name="Stream 2 Decl" start="32" end="47" type="SO_DECL"/>
    <field name="Stream 1 Decl" start="16" end="31" type="SO_DECL"/>
    <field name="Stream 0 Decl" start="0" end="15" type="SO_DECL"/>
  </struct>

  <struct name="SF_OUTPUT_ATTRIBUTE_DETAIL" length="1">
    <field name="Component Override W" start="15" end="15" type="bool"/>
    <field name="Component Override Z" start="14" end="14" type="bool"/>
    <field name="Component Override Y" start="13" end="13" type="bool"/>
    <field name="Component Override X" start="12" end="12" type="bool"/>
    <field name="Swizzle Control Mode" start="11" end="11" type="uint"/>
    <field name="Constant Source" start="9" end="10" type="uint">
      <value name="CONST_0000" value="0"/>
      <value name="CONST_0001_FLOAT" value="1"/>
      <value name="CONST_1111_FLOAT" value="2"/>
      <value name="PRIM_ID" value="3"/>
    </field>
    <field name="Swizzle Select" start="6" end="7" type="uint">
      <value name="INPUTATTR" value="0"/>
      <value name="INPUTATTR_FACING" value="1"/>
      <value name="INPUTATTR_W" value="2"/>
      <value name="INPUTATTR_FACING_W" value="3"/>
    </field>
    <field name="Source Attribute" start="0" end="4" type="uint"/>
  </struct>

  <struct name="SCISSOR_RECT" length="2">
    <field name="Scissor Rectangle Y Min" start="16" end="31" type="uint"/>
    <field name="Scissor Rectangle X Min" start="0" end="15" type="uint"/>
    <field name="Scissor Rectangle Y Max" start="48" end="63" type="uint"/>
    <field name="Scissor Rectangle X Max" start="32" end="47" type="uint"/>
  </struct>

  <struct name="SF_CLIP_VIEWPORT" length="16">
    <field name="Viewport Matrix Element m00" start="0" end="31" type="float"/>
    <field name="Viewport Matrix Element m11" start="32" end="63" type="float"/>
    <field name="Viewport Matrix Element m22" start="64" end="95" type="float"/>
    <field name="Viewport Matrix Element m30" start="96" end="127" type="float"/>
    <field name="Viewport Matrix Element m31" start="128" end="159" type="float"/>
    <field name="Viewport Matrix Element m32" start="160" end="191" type="float"/>
    <field name="X Min Clip Guardband" start="256" end="287" type="float"/>
    <field name="X Max Clip Guardband" start="288" end="319" type="float"/>
    <field name="Y Min Clip Guardband" start="320" end="351" type="float"/>
    <field name="Y Max Clip Guardband" start="352" end="383" type="float"/>
    <group count="4" start="384" size="32">
    </group>
  </struct>

  <struct name="BLEND_STATE_ENTRY" length="2">
    <field name="Color Buffer Blend Enable" start="31" end="31" type="bool"/>
    <field name="Independent Alpha Blend Enable" start="30" end="30" type="bool"/>
    <field name="Alpha Blend Function" start="26" end="28" type="3D_Color_Buffer_Blend_Function"/>
    <field name="Source Alpha Blend Factor" start="20" end="24" type="3D_Color_Buffer_Blend_Factor"/>
    <field name="Destination Alpha Blend Factor" start="15" end="19" type="3D_Color_Buffer_Blend_Factor"/>
    <field name="Color Blend Function" start="11" end="13" type="3D_Color_Buffer_Blend_Function"/>
    <field name="Source Blend Factor" start="5" end="9" type="3D_Color_Buffer_Blend_Factor"/>
    <field name="Destination Blend Factor" start="0" end="4" type="3D_Color_Buffer_Blend_Factor"/>
    <field name="AlphaToCoverage Enable" start="63" end="63" type="bool"/>
    <field name="AlphaToOne Enable" start="62" end="62" type="bool"/>
    <field name="AlphaToCoverage Dither Enable" start="61" end="61" type="bool"/>
    <field name="Write Disable Alpha" start="59" end="59" type="bool"/>
    <field name="Write Disable Red" start="58" end="58" type="bool"/>
    <field name="Write Disable Green" start="57" end="57" type="bool"/>
    <field name="Write Disable Blue" start="56" end="56" type="bool"/>
    <field name="Logic Op Enable" start="54" end="54" type="bool"/>
    <field name="Logic Op Function" start="50" end="53" type="3D_Logic_Op_Function"/>
    <field name="Alpha Test Enable" start="48" end="48" type="bool"/>
    <field name="Alpha Test Function" start="45" end="47" type="3D_Compare_Function"/>
    <field name="Color Dither Enable" start="44" end="44" type="bool"/>
    <field name="X Dither Offset" start="42" end="43" type="uint"/>
    <field name="Y Dither Offset" start="40" end="41" type="uint"/>
    <field name="Color Clamp Range" start="34" end="35" type="uint">
      <value name="COLORCLAMP_UNORM" value="0"/>
      <value name="COLORCLAMP_SNORM" value="1"/>
      <value name="COLORCLAMP_RTFORMAT" value="2"/>
    </field>
    <field name="Pre-Blend Color Clamp Enable" start="33" end="33" type="bool"/>
    <field name="Post-Blend Color Clamp Enable" start="32" end="32" type="bool"/>
  </struct>

  <struct name="BLEND_STATE" length="16">
    <group count="8" start="0" size="64">
      <field name="Entry" start="0" end="63" type="BLEND_STATE_ENTRY"/>
    </group>
  </struct>

  <struct name="CC_VIEWPORT" length="2">
    <field name="Minimum Depth" start="0" end="31" type="float"/>
    <field name="Maximum Depth" start="32" end="63" type="float"/>
  </struct>

  <struct name="COLOR_CALC_STATE" length="6">
    <field name="Stencil Reference Value" start="24" end="31" type="uint"/>
    <field name="Backface Stencil Reference Value" start="16" end="23" type="uint"/>
    <field name="Round Disable Function Disable" start="15" end="15" type="bool"/>
    <field name="Alpha Test Format" start="0" end="0" type="uint">
      <value name="ALPHATEST_UNORM8" value="0"/>
      <value name="ALPHATEST_FLOAT32" value="1"/>
    </field>
    <field name="Alpha Reference Value As UNORM8" start="32" end="63" type="uint"/>
    <field name="Alpha Reference Value As FLOAT32" start="32" end="63" type="float"/>
    <field name="Blend Constant Color Red" start="64" end="95" type="float"/>
    <field name="Blend Constant Color Green" start="96" end="127" type="float"/>
    <field name="Blend Constant Color Blue" start="128" end="159" type="float"/>
    <field name="Blend Constant Color Alpha" start="160" end="191" type="float"/>
  </struct>

  <struct name="DEPTH_STENCIL_STATE" length="3">
    <field name="Stencil Test Enable" start="31" end="31" type="bool"/>
    <field name="Stencil Test Function" start="28" end="30" type="3D_Compare_Function"/>
    <field name="Stencil Fail Op" start="25" end="27" type="3D_Stencil_Operation"/>
    <field name="Stencil Pass Depth Fail Op" start="22" end="24" type="3D_Stencil_Operation"/>
    <field name="Stencil Pass Depth Pass Op" start="19" end="21" type="3D_Stencil_Operation"/>
    <field name="Stencil Buffer Write Enable" start="18" end="18" type="bool"/>
    <field name="Double Sided Stencil Enable" start="15" end="15" type="bool"/>
    <field name="Backface Stencil Test Function" start="12" end="14" type="3D_Compare_Function"/>
    <field name="Backface Stencil Fail Op" start="9" end="11" type="3D_Stencil_Operation"/>
    <field name="Backface Stencil Pass Depth Fail Op" start="6" end="8" type="3D_Stencil_Operation"/>
    <field name="Backface Stencil Pass Depth Pass Op" start="3" end="5" type="3D_Stencil_Operation"/>
    <field name="Stencil Test Mask" start="56" end="63" type="uint"/>
    <field name="Stencil Write Mask" start="48" end="55" type="uint"/>
    <field name="Backface Stencil Test Mask" start="40" end="47" type="uint"/>
    <field name="Backface Stencil Write Mask" start="32" end="39" type="uint"/>
    <field name="Depth Test Enable" start="95" end="95" type="bool"/>
    <field name="Depth Test Function" start="91" end="93" type="3D_Compare_Function"/>
    <field name="Depth Buffer Write Enable" start="90" end="90" type="bool"/>
  </struct>

  <struct name="INTERFACE_DESCRIPTOR_DATA" length="8">
    <field name="Kernel Start Pointer" start="6" end="31" type="offset"/>
    <field name="Single Program Flow" start="50" end="50" type="bool"/>
    <field name="Thread Priority" start="49" end="49" type="uint">
      <value name="Normal Priority" value="0"/>
      <value name="High Priority" value="1"/>
    </field>
    <field name="Floating Point Mode" start="48" end="48" type="uint">
      <value name="IEEE-754" value="0"/>
      <value name="Alternate" value="1"/>
    </field>
    <field name="Illegal Opcode Exception Enable" start="45" end="45" type="bool"/>
    <field name="Mask Stack Exception Enable" start="43" end="43" type="bool"/>
    <field name="Software Exception Enable" start="39" end="39" type="bool"/>
    <field name="Sampler State Pointer" start="69" end="95" type="offset"/>
    <field name="Sampler Count" start="66" end="68" type="uint">
      <value name="No samplers used" value="0"/>
      <value name="Between 1 and 4 samplers used" value="1"/>
      <value name="Between 5 and 8 samplers used" value="2"/>
      <value name="Between 9 and 12 samplers used" value="3"/>
      <value name="Between 13 and 16 samplers used" value="4"/>
    </field>
    <field name="Binding Table Pointer" start="101" end="111" type="offset"/>
    <field name="Binding Table Entry Count" start="96" end="100" type="uint"/>
    <field name="Constant URB Entry Read Length" start="144" end="159" type="uint"/>
    <field name="Rounding Mode" start="182" end="183" type="uint">
      <value name="RTNE" value="0"/>
      <value name="RU" value="1"/>
      <value name="RD" value="2"/>
      <value name="RTZ" value="3"/>
    </field>
    <field name="Barrier Enable" start="181" end="181" type="bool"/>
    <field name="Shared Local Memory Size" start="176" end="180" type="uint"/>
    <field name="Number of Threads in GPGPU Thread Group" start="160" end="167" type="uint"/>
    <field name="Cross-Thread Constant Data Read Length" start="192" end="199" type="uint"/>
  </struct>

  <struct name="PALETTE_ENTRY" length="1">
    <field name="Alpha" start="24" end="31" type="uint"/>
    <field name="Red" start="16" end="23" type="uint"/>
    <field name="Green" start="8" end="15" type="uint"/>
    <field name="Blue" start="0" end="7" type="uint"/>
  </struct>

  <struct name="BINDING_TABLE_STATE" length="1">
    <field name="Surface State Pointer" start="5" end="31" type="offset"/>
  </struct>

  <struct name="RENDER_SURFACE_STATE" length="8">
    <field name="Surface Type" start="29" end="31" type="uint">
      <value name="SURFTYPE_1D" value="0"/>
      <value name="SURFTYPE_2D" value="1"/>
      <value name="SURFTYPE_3D" value="2"/>
      <value name="SURFTYPE_CUBE" value="3"/>
      <value name="SURFTYPE_BUFFER" value="4"/>
      <value name="SURFTYPE_STRBUF" value="5"/>
      <value name="SURFTYPE_NULL" value="7"/>
    </field>
    <field name="Surface Array" start="28" end="28" type="bool"/>
    <field name="Surface Format" start="18" end="26" type="SURFACE_FORMAT"/>
    <field name="Surface Vertical Alignment" start="16" end="17" type="uint">
      <value name="VALIGN_2" value="0"/>
      <value name="VALIGN_4" value="1"/>
    </field>
    <field name="Surface Horizontal Alignment" start="15" end="15" type="uint">
      <value name="HALIGN_4" value="0"/>
      <value name="HALIGN_8" value="1"/>
    </field>
    <field name="Tiled Surface" start="14" end="14" type="bool"/>
    <field name="Tile Walk" start="13" end="13" type="uint">
      <value name="TILEWALK_XMAJOR" value="0"/>
      <value name="TILEWALK_YMAJOR" value="1"/>
    </field>
    <field name="Vertical Line Stride" start="12" end="12" type="uint"/>
    <field name="Vertical Line Stride Offset" start="11" end="11" type="uint"/>
    <field name="Surface Array Spacing" start="10" end="10" type="uint">
      <value name="ARYSPC_FULL" value="0"/>
      <value name="ARYSPC_LOD0" value="1"/>
    </field>
    <field name="Render Cache Read Write Mode" start="8" end="8" type="uint"/>
    <field name="Media Boundary Pixel Mode" start="6" end="7" type="uint">
      <value name="NORMAL_MODE" value="0"/>
      <value name="PROGRESSIVE_FRAME" value="2"/>
      <value name="INTERLACED_FRAME" value="3"/>
    </field>
    <field name="Cube Face Enables" start="0" end="5" type="uint"/>
    <field name="Surface Base Address" start="32" end="63" type="address"/>
    <field name="Height" start="80" end="93" type="uint"/>
    <field name="Width" start="64" end="77" type="uint"/>
    <field name="Depth" start="117" end="127" type="uint"/>
    <field name="Integer Surface Format" start="114" end="116" type="uint"/>
    <field name="Surface Pitch" start="96" end="113" type="uint"/>
    <field name="Render Target Rotation" start="157" end="158" type="uint">
      <value name="RTROTATE_0DEG" value="0"/>
      <value name="RTROTATE_90DEG" value="1"/>
      <value name="RTROTATE_270DEG" value="3"/>
    </field>
    <field name="Minimum Array Element" start="146" end="156" type="uint"/>
    <field name="Render Target View Extent" start="135" end="145" type="uint"/>
    <field name="Multisampled Surface Storage Format" start="134" end="134" type="uint">
      <value name="MSFMT_MSS" value="0"/>
      <value name="MSFMT_DEPTH_STENCIL" value="1"/>
    </field>
    <field name="Number of Multisamples" start="131" end="133" type="uint">
      <value name="MULTISAMPLECOUNT_1" value="0"/>
      <value name="MULTISAMPLECOUNT_4" value="2"/>
      <value name="MULTISAMPLECOUNT_8" value="3"/>
    </field>
    <field name="Multisample Position Palette Index" start="128" end="130" type="uint"/>
    <field name="Strbuf Minimum Array Element" start="128" end="154" type="uint"/>
    <field name="X Offset" start="185" end="191" type="uint"/>
    <field name="Y Offset" start="180" end="183" type="uint"/>
    <field name="Surface Object Control State" start="176" end="179" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="MOCS" start="176" end="179" type="uint"/>
    <field name="Surface Min LOD" start="164" end="167" type="uint"/>
    <field name="MIP Count / LOD" start="160" end="163" type="uint"/>
    <field name="Append Counter Address" start="198" end="223" type="address"/>
    <field name="Append Counter Enable" start="193" end="193" type="bool"/>
    <field name="MCS Base Address" start="204" end="223" type="address"/>
    <field name="MCS Surface Pitch" start="195" end="203" type="uint"/>
    <field name="MCS Enable" start="192" end="192" type="bool"/>
    <field name="Reserved: MBZ" start="222" end="223" type="uint"/>
    <field name="X Offset for UV Plane" start="208" end="221" type="uint"/>
    <field name="Y Offset for UV Plane" start="192" end="205" type="uint"/>
    <field name="Red Clear Color" start="255" end="255" type="uint" />
    <field name="Green Clear Color" start="254" end="254" type="uint" />
    <field name="Blue Clear Color" start="253" end="253" type="uint" />
    <field name="Alpha Clear Color" start="252" end="252" type="uint" />
    <field name="Shader Channel Select Red" start="249" end="251" type="uint">
      <value name="SCS_ZERO" value="0"/>
      <value name="SCS_ONE" value="1"/>
      <value name="SCS_RED" value="4"/>
      <value name="SCS_GREEN" value="5"/>
      <value name="SCS_BLUE" value="6"/>
      <value name="SCS_ALPHA" value="7"/>
    </field>
    <field name="Shader Channel Select Green" start="246" end="248" type="uint"/>
    <field name="Shader Channel Select Blue" start="243" end="245" type="uint"/>
    <field name="Shader Channel Select Alpha" start="240" end="242" type="uint"/>
    <field name="Resource Min LOD" start="224" end="235" type="u4.8"/>
  </struct>

  <struct name="SAMPLER_BORDER_COLOR_STATE" length="20">
    <field name="Border Color Float Red" start="0" end="31" type="float"/>
    <field name="Border Color Float Green" start="32" end="63" type="float"/>
    <field name="Border Color Float Blue" start="64" end="95" type="float"/>
    <field name="Border Color Float Alpha" start="96" end="127" type="float"/>

    <field name="Border Color 8bit Red" start="512" end="519" type="uint"/>
    <field name="Border Color 8bit Green" start="520" end="527" type="uint"/>
    <field name="Border Color 8bit Blue" start="528" end="535" type="uint"/>
    <field name="Border Color 8bit Alpha" start="536" end="543" type="uint"/>

    <field name="Border Color 16bit Red" start="512" end="527" type="uint"/>
    <field name="Border Color 16bit Green" start="528" end="543" type="uint"/>
    <field name="Border Color 16bit Blue" start="576" end="591" type="uint"/>
    <field name="Border Color 16bit Alpha" start="592" end="607" type="uint"/>

    <field name="Border Color 32bit Red" start="512" end="543" type="uint"/>
    <field name="Border Color 32bit Green" start="544" end="575" type="uint"/>
    <field name="Border Color 32bit Blue" start="576" end="607" type="uint"/>
    <field name="Border Color 32bit Alpha" start="608" end="639" type="uint"/>
  </struct>

  <struct name="SAMPLER_STATE" length="4">
    <field name="Sampler Disable" start="31" end="31" type="bool"/>
    <field name="Texture Border Color Mode" start="29" end="29" type="uint">
      <value name="DX10/OGL" value="0"/>
      <value name="DX9" value="1"/>
    </field>
    <field name="LOD PreClamp Enable" start="28" end="28" type="uint" prefix="CLAMP_ENABLE">
      <value name="OGL" value="1"/>
    </field>
    <field name="Base Mip Level" start="22" end="26" type="u4.1"/>
    <field name="Mip Mode Filter" start="20" end="21" type="uint" prefix="MIPFILTER">
      <value name="NONE" value="0"/>
      <value name="NEAREST" value="1"/>
      <value name="LINEAR" value="3"/>
    </field>
    <field name="Mag Mode Filter" start="17" end="19" type="uint" prefix="MAPFILTER">
      <value name="NEAREST" value="0"/>
      <value name="LINEAR" value="1"/>
      <value name="ANISOTROPIC" value="2"/>
      <value name="MONO" value="6"/>
    </field>
    <field name="Min Mode Filter" start="14" end="16" type="uint" prefix="MAPFILTER">
      <value name="NEAREST" value="0"/>
      <value name="LINEAR" value="1"/>
      <value name="ANISOTROPIC" value="2"/>
      <value name="MONO" value="6"/>
    </field>
    <field name="Texture LOD Bias" start="1" end="13" type="s4.8"/>
    <field name="Anisotropic Algorithm" start="0" end="0" type="uint">
      <value name="LEGACY" value="0"/>
      <value name="EWA Approximation" value="1"/>
    </field>
    <field name="Min LOD" start="52" end="63" type="u4.8"/>
    <field name="Max LOD" start="40" end="51" type="u4.8"/>
    <field name="Shadow Function" start="33" end="35" type="uint">
      <value name="PREFILTEROP ALWAYS" value="0"/>
      <value name="PREFILTEROP NEVER" value="1"/>
      <value name="PREFILTEROP LESS" value="2"/>
      <value name="PREFILTEROP EQUAL" value="3"/>
      <value name="PREFILTEROP LEQUAL" value="4"/>
      <value name="PREFILTEROP GREATER" value="5"/>
      <value name="PREFILTEROP NOTEQUAL" value="6"/>
      <value name="PREFILTEROP GEQUAL" value="7"/>
    </field>
    <field name="Cube Surface Control Mode" start="32" end="32" type="uint">
      <value name="PROGRAMMED" value="0"/>
      <value name="OVERRIDE" value="1"/>
    </field>
    <field name="Border Color Pointer" start="69" end="95" type="offset"/>
    <field name="ChromaKey Enable" start="121" end="121" type="bool"/>
    <field name="ChromaKey Index" start="119" end="120" type="uint"/>
    <field name="ChromaKey Mode" start="118" end="118" type="uint">
      <value name="KEYFILTER_KILL_ON_ANY_MATCH" value="0"/>
      <value name="KEYFILTER_REPLACE_BLACK" value="1"/>
    </field>
    <field name="Maximum Anisotropy" start="115" end="117" type="uint">
      <value name="RATIO 2:1" value="0"/>
      <value name="RATIO 4:1" value="1"/>
      <value name="RATIO 6:1" value="2"/>
      <value name="RATIO 8:1" value="3"/>
      <value name="RATIO 10:1" value="4"/>
      <value name="RATIO 12:1" value="5"/>
      <value name="RATIO 14:1" value="6"/>
      <value name="RATIO 16:1" value="7"/>
    </field>
    <field name="R Address Min Filter Rounding Enable" start="109" end="109" type="bool"/>
    <field name="R Address Mag Filter Rounding Enable" start="110" end="110" type="bool"/>
    <field name="V Address Min Filter Rounding Enable" start="111" end="111" type="bool"/>
    <field name="V Address Mag Filter Rounding Enable" start="112" end="112" type="bool"/>
    <field name="U Address Min Filter Rounding Enable" start="113" end="113" type="bool"/>
    <field name="U Address Mag Filter Rounding Enable" start="114" end="114" type="bool"/>
    <field name="Trilinear Filter Quality" start="107" end="108" type="uint">
      <value name="FULL" value="0"/>
      <value name="TRIQUAL_HIGH/MAG_CLAMP_MIPFILTER" value="1"/>
      <value name="MED" value="2"/>
      <value name="LOW" value="3"/>
    </field>
    <field name="Non-normalized Coordinate Enable" start="106" end="106" type="bool"/>
    <field name="TCX Address Control Mode" start="102" end="104" type="uint"/>
    <field name="TCY Address Control Mode" start="99" end="101" type="uint"/>
    <field name="TCZ Address Control Mode" start="96" end="98" type="uint"/>
  </struct>

  <instruction name="3DPRIMITIVE" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="3"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="0"/>
    <field name="Indirect Parameter Enable" start="10" end="10" type="bool"/>
    <field name="UAV Coherency Required" start="9" end="9" type="bool"/>
    <field name="Predicate Enable" start="8" end="8" type="bool"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="End Offset Enable" start="41" end="41" type="bool"/>
    <field name="Vertex Access Type" start="40" end="40" type="uint">
      <value name="SEQUENTIAL" value="0"/>
      <value name="RANDOM" value="1"/>
    </field>
    <field name="Primitive Topology Type" start="32" end="37" type="3D_Prim_Topo_Type"/>
    <field name="Vertex Count Per Instance" start="64" end="95" type="uint"/>
    <field name="Start Vertex Location" start="96" end="127" type="uint"/>
    <field name="Instance Count" start="128" end="159" type="uint"/>
    <field name="Start Instance Location" start="160" end="191" type="uint"/>
    <field name="Base Vertex Location" start="192" end="223" type="int"/>
  </instruction>

  <instruction name="3DSTATE_AA_LINE_PARAMETERS" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="10"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="AA Coverage Bias" start="48" end="55" type="u0.8"/>
    <field name="AA Coverage Slope" start="32" end="39" type="u0.8"/>
    <field name="AA Coverage EndCap Bias" start="80" end="87" type="u0.8"/>
    <field name="AA Coverage EndCap Slope" start="64" end="71" type="u0.8"/>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_EDIT_DS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="70"/>
    <field name="DWord Length" start="0" end="8" type="uint" default="0"/>
    <field name="Binding Table Block Clear" start="48" end="63" type="uint"/>
    <field name="Binding Table Edit Target" start="32" end="33" type="uint">
      <value name="All Cores" value="3"/>
      <value name="Core 1" value="2"/>
      <value name="Core 0" value="1"/>
    </field>
    <group count="0" start="64" size="32">
      <field name="Entry [n]" start="0" end="31" type="BINDING_TABLE_EDIT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_EDIT_GS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="68"/>
    <field name="DWord Length" start="0" end="8" type="uint" default="0"/>
    <field name="Binding Table Block Clear" start="48" end="63" type="uint"/>
    <field name="Binding Table Edit Target" start="32" end="33" type="uint">
      <value name="All Cores" value="3"/>
      <value name="Core 1" value="2"/>
      <value name="Core 0" value="1"/>
    </field>
    <group count="0" start="64" size="32">
      <field name="Entry [n]" start="0" end="31" type="BINDING_TABLE_EDIT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_EDIT_HS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="69"/>
    <field name="DWord Length" start="0" end="8" type="uint" default="0"/>
    <field name="Binding Table Block Clear" start="48" end="63" type="uint"/>
    <field name="Binding Table Edit Target" start="32" end="33" type="uint">
      <value name="All Cores" value="3"/>
      <value name="Core 1" value="2"/>
      <value name="Core 0" value="1"/>
    </field>
    <group count="0" start="64" size="32">
      <field name="Entry [n]" start="0" end="31" type="BINDING_TABLE_EDIT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_EDIT_PS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="71"/>
    <field name="DWord Length" start="0" end="8" type="uint" default="0"/>
    <field name="Binding Table Block Clear" start="48" end="63" type="uint"/>
    <field name="Binding Table Edit Target" start="32" end="33" type="uint">
      <value name="All Cores" value="3"/>
      <value name="Core 1" value="2"/>
      <value name="Core 0" value="1"/>
    </field>
    <group count="0" start="64" size="32">
      <field name="Entry [n]" start="0" end="31" type="BINDING_TABLE_EDIT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_EDIT_VS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="67"/>
    <field name="DWord Length" start="0" end="8" type="uint" default="0"/>
    <field name="Binding Table Block Clear" start="48" end="63" type="uint"/>
    <field name="Binding Table Edit Target" start="32" end="33" type="uint">
      <value name="All Cores" value="3"/>
      <value name="Core 1" value="2"/>
      <value name="Core 0" value="1"/>
    </field>
    <group count="0" start="64" size="32">
      <field name="Entry [n]" start="0" end="31" type="BINDING_TABLE_EDIT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_DS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="40"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to DS Binding Table" start="37" end="47" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_GS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="41"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to GS Binding Table" start="37" end="47" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_HS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="39"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to HS Binding Table" start="37" end="47" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_PS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="42"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to PS Binding Table" start="37" end="47" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_POINTERS_VS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="38"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to VS Binding Table" start="37" end="47" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_BINDING_TABLE_POOL_ALLOC" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="25"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Binding Table Pool Base Address" start="44" end="63" type="address"/>
    <field name="Binding Table Pool Enable" start="43" end="43" type="uint"/>
    <field name="Surface Object Control State" start="39" end="42" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Binding Table Pool Upper Bound" start="76" end="95" type="address"/>
  </instruction>

  <instruction name="3DSTATE_BLEND_STATE_POINTERS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="36"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Blend State Pointer" start="38" end="63" type="offset"/>
    <field start="32" end="32" type="mbo"/>
  </instruction>

  <instruction name="3DSTATE_CC_STATE_POINTERS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="14"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Color Calc State Pointer" start="38" end="63" type="offset"/>
    <field start="32" end="32" type="mbo"/>
  </instruction>

  <instruction name="3DSTATE_CHROMA_KEY" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="4"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="2"/>
    <field name="ChromaKey Table Index" start="62" end="63" type="uint"/>
    <field name="ChromaKey Low Value" start="64" end="95" type="uint"/>
    <field name="ChromaKey High Value" start="96" end="127" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_CLEAR_PARAMS" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="4"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Depth Clear Value" start="32" end="63" type="uint"/>
    <field name="Depth Clear Value Valid" start="64" end="64" type="bool"/>
  </instruction>

  <instruction name="3DSTATE_CLIP" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="18"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="2"/>
    <field name="Front Winding" start="52" end="52" type="uint"/>
    <field name="Vertex Sub Pixel Precision Select" start="51" end="51" type="uint"/>
    <field name="EarlyCull Enable" start="50" end="50" type="bool"/>
    <field name="Cull Mode" start="48" end="49" type="uint" prefix="CULLMODE">
      <value name="BOTH" value="0"/>
      <value name="NONE" value="1"/>
      <value name="FRONT" value="2"/>
      <value name="BACK" value="3"/>
    </field>
    <field name="Clipper Statistics Enable" start="42" end="42" type="bool"/>
    <field name="User Clip Distance Cull Test Enable Bitmask" start="32" end="39" type="uint"/>
    <field name="Clip Enable" start="95" end="95" type="bool"/>
    <field name="API Mode" start="94" end="94" type="uint">
      <value name="APIMODE_OGL" value="0"/>
      <value name="APIMODE_D3D" value="1"/>
    </field>
    <field name="Viewport XY ClipTest Enable" start="92" end="92" type="bool"/>
    <field name="Viewport Z ClipTest Enable" start="91" end="91" type="bool"/>
    <field name="Guardband ClipTest Enable" start="90" end="90" type="bool"/>
    <field name="User Clip Distance Clip Test Enable Bitmask" start="80" end="87" type="uint"/>
    <field name="Clip Mode" start="77" end="79" type="uint">
      <value name="CLIPMODE_NORMAL" value="0"/>
      <value name="CLIPMODE_REJECT_ALL" value="3"/>
      <value name="CLIPMODE_ACCEPT_ALL" value="4"/>
    </field>
    <field name="Perspective Divide Disable" start="73" end="73" type="bool"/>
    <field name="Non-Perspective Barycentric Enable" start="72" end="72" type="bool"/>
    <field name="Triangle Strip/List Provoking Vertex Select" start="68" end="69" type="uint">
      <value name="Vertex 0" value="0"/>
      <value name="Vertex 1" value="1"/>
      <value name="Vertex 2" value="2"/>
    </field>
    <field name="Line Strip/List Provoking Vertex Select" start="66" end="67" type="uint">
      <value name="Vertex 0" value="0"/>
      <value name="Vertex 1" value="1"/>
    </field>
    <field name="Triangle Fan Provoking Vertex Select" start="64" end="65" type="uint">
      <value name="Vertex 0" value="0"/>
      <value name="Vertex 1" value="1"/>
      <value name="Vertex 2" value="2"/>
    </field>
    <field name="Minimum Point Width" start="113" end="123" type="u8.3"/>
    <field name="Maximum Point Width" start="102" end="112" type="u8.3"/>
    <field name="Force Zero RTAIndex Enable" start="101" end="101" type="bool"/>
    <field name="Maximum VPIndex" start="96" end="99" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_CONSTANT_DS" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="26"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="Constant Body" start="32" end="223" type="3DSTATE_CONSTANT_BODY"/>
  </instruction>

  <instruction name="3DSTATE_CONSTANT_GS" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="22"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="Constant Body" start="32" end="223" type="3DSTATE_CONSTANT_BODY"/>
  </instruction>

  <instruction name="3DSTATE_CONSTANT_HS" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="25"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="Constant Body" start="32" end="223" type="3DSTATE_CONSTANT_BODY"/>
  </instruction>

  <instruction name="3DSTATE_CONSTANT_PS" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="23"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="Constant Body" start="32" end="223" type="3DSTATE_CONSTANT_BODY"/>
  </instruction>

  <instruction name="3DSTATE_CONSTANT_VS" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="21"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="Constant Body" start="32" end="223" type="3DSTATE_CONSTANT_BODY"/>
  </instruction>

  <instruction name="3DSTATE_DEPTH_BUFFER" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="5"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="Surface Type" start="61" end="63" type="uint">
      <value name="SURFTYPE_1D" value="0"/>
      <value name="SURFTYPE_2D" value="1"/>
      <value name="SURFTYPE_3D" value="2"/>
      <value name="SURFTYPE_CUBE" value="3"/>
      <value name="SURFTYPE_NULL" value="7"/>
    </field>
    <field name="Depth Write Enable" start="60" end="60" type="bool"/>
    <field name="Stencil Write Enable" start="59" end="59" type="bool"/>
    <field name="Hierarchical Depth Buffer Enable" start="54" end="54" type="bool"/>
    <field name="Surface Format" start="50" end="52" type="uint">
      <value name="D32_FLOAT" value="1"/>
      <value name="D24_UNORM_X8_UINT" value="3"/>
      <value name="D16_UNORM" value="5"/>
    </field>
    <field name="Surface Pitch" start="32" end="49" type="uint"/>
    <field name="Surface Base Address" start="64" end="95" type="address"/>
    <field name="Height" start="114" end="127" type="uint"/>
    <field name="Width" start="100" end="113" type="uint"/>
    <field name="LOD" start="96" end="99" type="uint"/>
    <field name="Depth" start="149" end="159" type="uint">
      <value name="SURFTYPE_CUBE (must be zero)" value="0"/>
    </field>
    <field name="Minimum Array Element" start="138" end="148" type="uint"/>
    <field name="Depth Buffer Object Control State" start="128" end="131" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Depth Buffer MOCS" start="128" end="131" type="uint"/>
    <field name="Depth Coordinate Offset Y" start="176" end="191" type="int"/>
    <field name="Depth Coordinate Offset X" start="160" end="175" type="int"/>
    <field name="Render Target View Extent" start="213" end="223" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_DEPTH_STENCIL_STATE_POINTERS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="37"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to DEPTH_STENCIL_STATE" start="38" end="63" type="offset"/>
    <field start="32" end="32" type="mbo"/>
  </instruction>

  <instruction name="3DSTATE_DRAWING_RECTANGLE" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="0"/>
    <field name="Core Mode Select" start="14" end="15" type="uint">
      <value name="Legacy" value="0"/>
      <value name="Core 0 Enabled" value="1"/>
      <value name="Core 1 Enabled" value="2"/>
    </field>
    <field name="DWord Length" start="0" end="7" type="uint" default="2"/>
    <field name="Clipped Drawing Rectangle Y Min" start="48" end="63" type="uint"/>
    <field name="Clipped Drawing Rectangle X Min" start="32" end="47" type="uint"/>
    <field name="Clipped Drawing Rectangle Y Max" start="80" end="95" type="uint"/>
    <field name="Clipped Drawing Rectangle X Max" start="64" end="79" type="uint"/>
    <field name="Drawing Rectangle Origin Y" start="112" end="127" type="int"/>
    <field name="Drawing Rectangle Origin X" start="96" end="111" type="int"/>
  </instruction>

  <instruction name="3DSTATE_DS" bias="2" length="6">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="29"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="4"/>
    <field name="Kernel Start Pointer" start="38" end="63" type="offset"/>
    <field name="Single Domain Point Dispatch" start="95" end="95" type="uint"/>
    <field name="Vector Mask Enable" start="94" end="94" type="bool"/>
    <field name="Sampler Count" start="91" end="93" type="uint">
      <value name="No Samplers" value="0"/>
      <value name="1-4 Samplers" value="1"/>
      <value name="5-8 Samplers" value="2"/>
      <value name="9-12 Samplers" value="3"/>
      <value name="13-16 Samplers" value="4"/>
    </field>
    <field name="Binding Table Entry Count" start="82" end="89" type="uint"/>
    <field name="Thread Dispatch Priority" start="81" end="81" type="uint">
      <value name="High" value="1"/>
    </field>
    <field name="Floating Point Mode" start="80" end="80" type="uint">
      <value name="IEEE-754" value="0"/>
      <value name="Alternate" value="1"/>
    </field>
    <field name="Accesses UAV" start="78" end="78" type="bool"/>
    <field name="Illegal Opcode Exception Enable" start="77" end="77" type="bool"/>
    <field name="Software Exception Enable" start="71" end="71" type="bool"/>
    <field name="Scratch Space Base Pointer" start="106" end="127" type="address"/>
    <field name="Per-Thread Scratch Space" start="96" end="99" type="uint"/>
    <field name="Dispatch GRF Start Register For URB Data" start="148" end="152" type="uint"/>
    <field name="Patch URB Entry Read Length" start="139" end="145" type="uint"/>
    <field name="Patch URB Entry Read Offset" start="132" end="137" type="uint"/>
    <field name="Maximum Number of Threads" start="181" end="189" type="uint"/>
    <field name="Statistics Enable" start="170" end="170" type="bool"/>
    <field name="Compute W Coordinate Enable" start="162" end="162" type="bool"/>
    <field name="DS Cache Disable" start="161" end="161" type="bool"/>
    <field name="Function Enable" start="160" end="160" type="bool"/>
  </instruction>

  <instruction name="3DSTATE_GATHER_CONSTANT_DS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="55"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Constant Buffer Valid" start="48" end="63" type="uint"/>
    <field name="Constant Buffer Binding Table Block" start="44" end="47" type="uint"/>
    <field name="Gather Buffer Offset" start="70" end="86" type="offset"/>
    <group count="0" start="96" size="32">
      <field name="Entry_0" start="0" end="15" type="GATHER_CONSTANT_ENTRY"/>
      <field name="Entry_1" start="16" end="31" type="GATHER_CONSTANT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_GATHER_CONSTANT_GS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="53"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Constant Buffer Valid" start="48" end="63" type="uint"/>
    <field name="Constant Buffer Binding Table Block" start="44" end="47" type="uint"/>
    <field name="Gather Buffer Offset" start="70" end="86" type="offset"/>
    <group count="0" start="96" size="32">
      <field name="Entry_0" start="0" end="15" type="GATHER_CONSTANT_ENTRY"/>
      <field name="Entry_1" start="16" end="31" type="GATHER_CONSTANT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_GATHER_CONSTANT_HS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="54"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Constant Buffer Valid" start="48" end="63" type="uint"/>
    <field name="Constant Buffer Binding Table Block" start="44" end="47" type="uint"/>
    <field name="Gather Buffer Offset" start="70" end="86" type="offset"/>
    <group count="0" start="96" size="32">
      <field name="Entry_0" start="0" end="15" type="GATHER_CONSTANT_ENTRY"/>
      <field name="Entry_1" start="16" end="31" type="GATHER_CONSTANT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_GATHER_CONSTANT_PS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="56"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Constant Buffer Valid" start="48" end="63" type="uint"/>
    <field name="Constant Buffer Binding Table Block" start="44" end="47" type="uint"/>
    <field name="Gather Buffer Offset" start="70" end="86" type="offset"/>
    <field name="Constant Buffer Dx9 Enable" start="68" end="68" type="bool"/>
    <group count="0" start="96" size="32">
      <field name="Entry_0" start="0" end="15" type="GATHER_CONSTANT_ENTRY"/>
      <field name="Entry_1" start="16" end="31" type="GATHER_CONSTANT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_GATHER_CONSTANT_VS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="52"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Constant Buffer Valid" start="48" end="63" type="uint"/>
    <field name="Constant Buffer Binding Table Block" start="44" end="47" type="uint"/>
    <field name="Gather Buffer Offset" start="70" end="86" type="offset"/>
    <field name="Constant Buffer Dx9 Enable" start="68" end="68" type="bool"/>
    <group count="0" start="96" size="32">
      <field name="Entry_0" start="0" end="15" type="GATHER_CONSTANT_ENTRY"/>
      <field name="Entry_1" start="16" end="31" type="GATHER_CONSTANT_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_GATHER_POOL_ALLOC" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="26"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Gather Pool Base Address" start="44" end="63" type="address"/>
    <field name="Gather Pool Enable" start="43" end="43" type="bool"/>
    <field start="36" end="37" type="mbo"/>
    <field name="Memory Object Control State" start="32" end="35" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Gather Pool Upper Bound" start="76" end="95" type="address"/>
  </instruction>

  <instruction name="3DSTATE_GS" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="17"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="Kernel Start Pointer" start="38" end="63" type="offset"/>
    <field name="Single Program Flow" start="95" end="95" type="bool"/>
    <field name="Vector Mask Enable" start="94" end="94" type="bool"/>
    <field name="Sampler Count" start="91" end="93" type="uint">
      <value name="No Samplers" value="0"/>
      <value name="1-4 Samplers" value="1"/>
      <value name="5-8 Samplers" value="2"/>
      <value name="9-12 Samplers" value="3"/>
      <value name="13-16 Samplers" value="4"/>
    </field>
    <field name="Binding Table Entry Count" start="82" end="89" type="uint"/>
    <field name="Thread Priority" start="81" end="81" type="uint">
      <value name="Normal Priority" value="0"/>
      <value name="High Priority" value="1"/>
    </field>
    <field name="Floating Point Mode" start="80" end="80" type="uint">
      <value name="IEEE-754" value="0"/>
      <value name="Alternate" value="1"/>
    </field>
    <field name="Illegal Opcode Exception Enable" start="77" end="77" type="bool"/>
    <field name="GS accesses UAV" start="76" end="76" type="uint"/>
    <field name="Mask Stack Exception Enable" start="75" end="75" type="bool"/>
    <field name="Software  Exception Enable" start="71" end="71" type="bool"/>
    <field name="Scratch Space Base Pointer" start="106" end="127" type="address"/>
    <field name="Per-Thread Scratch Space" start="96" end="99" type="uint"/>
    <field name="Output Vertex Size" start="151" end="156" type="uint"/>
    <field name="Output Topology" start="145" end="150" type="3D_Prim_Topo_Type"/>
    <field name="Vertex URB Entry Read Length" start="139" end="144" type="uint"/>
    <field name="Include Vertex Handles" start="138" end="138" type="bool"/>
    <field name="Vertex URB Entry Read Offset" start="132" end="137" type="uint"/>
    <field name="Dispatch GRF Start Register For URB Data" start="128" end="131" type="uint"/>
    <field name="Maximum Number of Threads" start="184" end="191" type="uint"/>
    <field name="Control Data Header Size" start="180" end="183" type="uint"/>
    <field name="Instance Control" start="175" end="179" type="uint"/>
    <field name="Default StreamID" start="173" end="174" type="uint"/>
    <field name="Dispatch Mode" start="171" end="172" type="uint" prefix="DISPATCH_MODE">
      <value name="SINGLE" value="0"/>
      <value name="DUAL_INSTANCE" value="1"/>
      <value name="DUAL_OBJECT" value="2"/>
    </field>
    <field name="Statistics Enable" start="170" end="170" type="uint"/>
    <field name="GS Invocations Increment Value" start="165" end="169" type="uint"/>
    <field name="Include Primitive ID" start="164" end="164" type="bool"/>
    <field name="Hint" start="163" end="163" type="uint"/>
    <field name="Reorder Mode" start="162" end="162" type="uint">
      <value name="LEADING" value="0"/>
      <value name="TRAILING" value="1"/>
    </field>
    <field name="Discard Adjacency" start="161" end="161" type="bool"/>
    <field name="Function Enable" start="160" end="160" type="bool"/>
    <field name="Control Data Format" start="223" end="223" type="uint">
      <value name="GSCTL_CUT" value="0"/>
      <value name="GSCTL_SID" value="1"/>
    </field>
    <field name="Semaphore Handle" start="192" end="204" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_HIER_DEPTH_BUFFER" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="7"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Hierarchical Depth Buffer Object Control State" start="57" end="60" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Hierarchical Depth Buffer MOCS" start="57" end="60" type="uint"/>
    <field name="Surface Pitch" start="32" end="48" type="uint"/>
    <field name="Surface Base Address" start="64" end="95" type="address"/>
  </instruction>

  <instruction name="3DSTATE_HS" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="27"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="Sampler Count" start="59" end="61" type="uint">
      <value name="No Samplers" value="0"/>
      <value name="1-4 Samplers" value="1"/>
      <value name="5-8 Samplers" value="2"/>
      <value name="9-12 Samplers" value="3"/>
      <value name="13-16 Samplers" value="4"/>
    </field>
    <field name="Binding Table Entry Count" start="50" end="57" type="uint"/>
    <field name="Thread Dispatch Priority" start="49" end="49" type="uint">
      <value name="High" value="1"/>
    </field>
    <field name="Floating Point Mode" start="48" end="48" type="uint">
      <value name="IEEE-754" value="0"/>
      <value name="Alternate" value="1"/>
    </field>
    <field name="Illegal Opcode Exception Enable" start="45" end="45" type="bool"/>
    <field name="Software Exception Enable" start="44" end="44" type="bool"/>
    <field name="Maximum Number of Threads" start="32" end="39" type="uint"/>
    <field name="Enable" start="95" end="95" type="bool"/>
    <field name="Statistics Enable" start="93" end="93" type="bool"/>
    <field name="Instance Count" start="64" end="67" type="uint"/>
    <field name="Kernel Start Pointer" start="102" end="127" type="offset"/>
    <field name="Scratch Space Base Pointer" start="138" end="159" type="address"/>
    <field name="Per-Thread Scratch Space" start="128" end="131" type="uint"/>
    <field name="Single Program Flow" start="187" end="187" type="bool"/>
    <field name="Vector Mask Enable" start="186" end="186" type="bool"/>
    <field name="HS accesses UAV" start="185" end="185" type="bool"/>
    <field name="Include Vertex Handles" start="184" end="184" type="bool"/>
    <field name="Dispatch GRF Start Register For URB Data" start="179" end="183" type="uint"/>
    <field name="Vertex URB Entry Read Length" start="171" end="176" type="uint"/>
    <field name="Vertex URB Entry Read Offset" start="164" end="169" type="uint"/>
    <field name="Semaphore Handle" start="192" end="204" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_INDEX_BUFFER" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="10"/>
    <field name="Memory Object Control State" start="12" end="15" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Index Format" start="8" end="9" type="uint" prefix="INDEX">
      <value name="BYTE" value="0"/>
      <value name="WORD" value="1"/>
      <value name="DWORD" value="2"/>
    </field>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Buffer Starting Address" start="32" end="63" type="address"/>
    <field name="Buffer Ending Address" start="64" end="95" type="address"/>
  </instruction>

  <instruction name="3DSTATE_LINE_STIPPLE" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="8"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Modify Enable (Current Repeat Counter, Current Stipple Index)" start="63" end="63" type="bool"/>
    <field name="Current Repeat Counter" start="53" end="61" type="uint"/>
    <field name="Current Stipple Index" start="48" end="51" type="uint"/>
    <field name="Line Stipple Pattern" start="32" end="47" type="uint"/>
    <field name="Line Stipple Inverse Repeat Count" start="79" end="95" type="u1.16"/>
    <field name="Line Stipple Repeat Count" start="64" end="72" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_MONOFILTER_SIZE" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="17"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Monochrome Filter Width" start="35" end="37" type="uint"/>
    <field name="Monochrome Filter Height" start="32" end="34" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_MULTISAMPLE" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="13"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="2"/>
    <field name="Multi Sample Enable" start="37" end="37" type="bool"/>
    <field name="Pixel Location" start="36" end="36" type="uint">
      <value name="PIXLOC_CENTER" value="0"/>
      <value name="PIXLOC_UL_CORNER" value="1"/>
    </field>
    <field name="Number of Multisamples" start="33" end="35" type="uint">
      <value name="NUMSAMPLES_1" value="0"/>
      <value name="NUMSAMPLES_4" value="2"/>
      <value name="NUMSAMPLES_8" value="3"/>
    </field>
    <field name="Sample3 X Offset" start="92" end="95" type="u0.4"/>
    <field name="Sample3 Y Offset" start="88" end="91" type="u0.4"/>
    <field name="Sample2 X Offset" start="84" end="87" type="u0.4"/>
    <field name="Sample2 Y Offset" start="80" end="83" type="u0.4"/>
    <field name="Sample1 X Offset" start="76" end="79" type="u0.4"/>
    <field name="Sample1 Y Offset" start="72" end="75" type="u0.4"/>
    <field name="Sample0 X Offset" start="68" end="71" type="u0.4"/>
    <field name="Sample0 Y Offset" start="64" end="67" type="u0.4"/>
    <field name="Sample7 X Offset" start="124" end="127" type="u0.4"/>
    <field name="Sample7 Y Offset" start="120" end="123" type="u0.4"/>
    <field name="Sample6 X Offset" start="116" end="119" type="u0.4"/>
    <field name="Sample6 Y Offset" start="112" end="115" type="u0.4"/>
    <field name="Sample5 X Offset" start="108" end="111" type="u0.4"/>
    <field name="Sample5 Y Offset" start="104" end="107" type="u0.4"/>
    <field name="Sample4 X Offset" start="100" end="103" type="u0.4"/>
    <field name="Sample4 Y Offset" start="96" end="99" type="u0.4"/>
  </instruction>

  <instruction name="3DSTATE_POLY_STIPPLE_OFFSET" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="6"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Polygon Stipple X Offset" start="40" end="44" type="uint"/>
    <field name="Polygon Stipple Y Offset" start="32" end="36" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_POLY_STIPPLE_PATTERN" bias="2" length="33">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="7"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="31"/>
    <group count="32" start="32" size="32">
      <field name="Pattern Row" start="0" end="31" type="uint"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_PS" bias="2" length="8">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="32"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="6"/>
    <field name="Kernel Start Pointer[0]" start="38" end="63" type="offset"/>
    <field name="Single Program Flow" start="95" end="95" type="bool"/>
    <field name="Vector Mask Enable" start="94" end="94" type="bool"/>
    <field name="Sampler Count" start="91" end="93" type="uint"/>
    <field name="Denormal Mode" start="90" end="90" type="uint">
      <value name="FTZ" value="0"/>
      <value name="RET" value="1"/>
    </field>
    <field name="Binding Table Entry Count" start="82" end="89" type="uint"/>
    <field name="Thread Priority" start="81" end="81" type="uint">
      <value name="High" value="1"/>
    </field>
    <field name="Floating Point Mode" start="80" end="80" type="uint">
      <value name="IEEE-754" value="0"/>
      <value name="Alternate" value="1"/>
    </field>
    <field name="Rounding Mode" start="78" end="79" type="uint">
      <value name="RTNE" value="0"/>
      <value name="RU" value="1"/>
      <value name="RD" value="2"/>
      <value name="RTZ" value="3"/>
    </field>
    <field name="Illegal Opcode Exception Enable" start="77" end="77" type="bool"/>
    <field name="Mask Stack Exception Enable" start="75" end="75" type="bool"/>
    <field name="Software  Exception Enable" start="71" end="71" type="bool"/>
    <field name="Scratch Space Base Pointer" start="106" end="127" type="address"/>
    <field name="Per Thread Scratch Space" start="96" end="99" type="uint"/>
    <field name="Maximum Number of Threads" start="151" end="159" type="uint"/>
    <field name="Sample Mask" start="140" end="147" type="uint"/>
    <field name="Push Constant Enable" start="139" end="139" type="bool"/>
    <field name="Attribute Enable" start="138" end="138" type="bool"/>
    <field name="oMask Present to RenderTarget" start="137" end="137" type="bool"/>
    <field name="Render Target Fast Clear Enable" start="136" end="136" type="bool"/>
    <field name="Dual Source Blend Enable" start="135" end="135" type="bool"/>
    <field name="Render Target Resolve Enable" start="134" end="134" type="bool"/>
    <field name="PS Accesses UAV" start="133" end="133" type="bool"/>
    <field name="Position XY Offset Select" start="131" end="132" type="uint">
      <value name="POSOFFSET_NONE" value="0"/>
      <value name="POSOFFSET_CENTROID" value="2"/>
      <value name="POSOFFSET_SAMPLE" value="3"/>
    </field>
    <field name="32 Pixel Dispatch Enable" start="130" end="130" type="bool"/>
    <field name="16 Pixel Dispatch Enable" start="129" end="129" type="bool"/>
    <field name="8 Pixel Dispatch Enable" start="128" end="128" type="bool"/>
    <field name="Dispatch GRF Start Register For Constant/Setup Data [0]" start="176" end="182" type="uint"/>
    <field name="Dispatch GRF Start Register For Constant/Setup Data [1]" start="168" end="174" type="uint"/>
    <field name="Dispatch GRF Start Register For Constant/Setup Data [2]" start="160" end="166" type="uint"/>
    <field name="Kernel Start Pointer[1]" start="198" end="223" type="offset"/>
    <field name="Kernel Start Pointer[2]" start="230" end="255" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_DS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="20"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Constant Buffer Offset" start="48" end="52" type="uint"/>
    <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_GS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="21"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Constant Buffer Offset" start="48" end="52" type="uint"/>
    <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_HS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="19"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Constant Buffer Offset" start="48" end="52" type="uint"/>
    <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_PS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="22"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Constant Buffer Offset" start="48" end="52" type="uint"/>
    <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_PUSH_CONSTANT_ALLOC_VS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="18"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Constant Buffer Offset" start="48" end="52" type="uint"/>
    <field name="Constant Buffer Size" start="32" end="37" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_RAST_MULTISAMPLE" bias="2" length="6">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="14"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="4"/>
    <field name="Number of Rasterization Multisamples" start="33" end="35" type="uint" prefix="NRM">
      <value name="NUMRASTSAMPLES_1" value="0"/>
      <value name="NUMRASTSAMPLES_2" value="1"/>
      <value name="NUMRASTSAMPLES_4" value="2"/>
      <value name="NUMRASTSAMPLES_8" value="3"/>
      <value name="NUMRASTSAMPLES_16" value="4"/>
    </field>
    <field name="Sample3 X Offset" start="92" end="95" type="u0.4"/>
    <field name="Sample3 Y Offset" start="88" end="91" type="u0.4"/>
    <field name="Sample2 X Offset" start="84" end="87" type="u0.4"/>
    <field name="Sample2 Y Offset" start="80" end="83" type="u0.4"/>
    <field name="Sample1 X Offset" start="76" end="79" type="u0.4"/>
    <field name="Sample1 Y Offset" start="72" end="75" type="u0.4"/>
    <field name="Sample0 X Offset" start="68" end="71" type="u0.4"/>
    <field name="Sample0 Y Offset" start="64" end="67" type="u0.4"/>
    <field name="Sample7 X Offset" start="124" end="127" type="u0.4"/>
    <field name="Sample7 Y Offset" start="120" end="123" type="u0.4"/>
    <field name="Sample6 X Offset" start="116" end="119" type="u0.4"/>
    <field name="Sample6 Y Offset" start="112" end="115" type="u0.4"/>
    <field name="Sample5 X Offset" start="108" end="111" type="u0.4"/>
    <field name="Sample5 Y Offset" start="104" end="107" type="u0.4"/>
    <field name="Sample4 X Offset" start="100" end="103" type="u0.4"/>
    <field name="Sample4 Y Offset" start="96" end="99" type="u0.4"/>
    <field name="Sample11 X Offset" start="156" end="159" type="u0.4"/>
    <field name="Sample11 Y Offset" start="152" end="155" type="u0.4"/>
    <field name="Sample10 X Offset" start="148" end="151" type="u0.4"/>
    <field name="Sample10 Y Offset" start="144" end="147" type="u0.4"/>
    <field name="Sample9 X Offset" start="140" end="143" type="u0.4"/>
    <field name="Sample9 Y Offset" start="136" end="139" type="u0.4"/>
    <field name="Sample8 X Offset" start="132" end="135" type="u0.4"/>
    <field name="Sample8 Y Offset" start="128" end="131" type="u0.4"/>
    <field name="Sample15 X Offset" start="188" end="191" type="u0.4"/>
    <field name="Sample15 Y Offset" start="184" end="187" type="u0.4"/>
    <field name="Sample14 X Offset" start="180" end="183" type="u0.4"/>
    <field name="Sample14 Y Offset" start="176" end="179" type="u0.4"/>
    <field name="Sample13 X Offset" start="172" end="175" type="u0.4"/>
    <field name="Sample13 Y Offset" start="168" end="171" type="u0.4"/>
    <field name="Sample12 X Offset" start="164" end="167" type="u0.4"/>
    <field name="Sample12 Y Offset" start="160" end="163" type="u0.4"/>
  </instruction>

  <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD0" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="2"/>
    <field name="DWord Length" start="0" end="7" type="uint"/>
    <group count="0" start="32" size="32">
      <field name="Entry" start="0" end="31" type="PALETTE_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_SAMPLER_PALETTE_LOAD1" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="12"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <group count="0" start="32" size="32">
      <field name="Palette Alpha[0:N-1]" start="24" end="31" type="uint"/>
      <field name="Palette Red[0:N-1]" start="16" end="23" type="uint"/>
      <field name="Palette Green[0:N-1]" start="8" end="15" type="uint"/>
      <field name="Palette Blue[0:N-1]" start="0" end="7" type="uint"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_DS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="45"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to DS Sampler State" start="37" end="63" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_GS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="46"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to GS Sampler State" start="37" end="63" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_HS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="44"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to HS Sampler State" start="37" end="63" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_PS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="47"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to PS Sampler State" start="37" end="63" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_SAMPLER_STATE_POINTERS_VS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="43"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Pointer to VS Sampler State" start="37" end="63" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_SAMPLE_MASK" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="24"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Sample Mask" start="32" end="39" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_SBE" bias="2" length="14">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="31"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="12"/>
    <field name="Attribute Swizzle Control Mode" start="60" end="60" type="uint"/>
    <field name="Number of SF Output Attributes" start="54" end="59" type="uint"/>
    <field name="Attribute Swizzle Enable" start="53" end="53" type="bool"/>
    <field name="Point Sprite Texture Coordinate Origin" start="52" end="52" type="uint">
      <value name="UPPERLEFT" value="0"/>
      <value name="LOWERLEFT" value="1"/>
    </field>
    <field name="Vertex URB Entry Read Length" start="43" end="47" type="uint"/>
    <field name="Vertex URB Entry Read Offset" start="36" end="41" type="uint"/>
    <group count="16" start="64" size="16">
      <field name="Attribute" start="0" end="15" type="SF_OUTPUT_ATTRIBUTE_DETAIL"/>
    </group>
    <field name="Point Sprite Texture Coordinate Enable" start="320" end="351" type="uint"/>
    <field name="Constant Interpolation Enable" start="352" end="383" type="uint"/>
    <field name="Attribute 7 WrapShortest Enables" start="412" end="415" type="uint"/>
    <field name="Attribute 6 WrapShortest Enables" start="408" end="411" type="uint"/>
    <field name="Attribute 5 WrapShortest Enables" start="404" end="407" type="uint"/>
    <field name="Attribute 4 WrapShortest Enables" start="400" end="403" type="uint"/>
    <field name="Attribute 3 WrapShortest Enables" start="396" end="399" type="uint"/>
    <field name="Attribute 2 WrapShortest Enables" start="392" end="395" type="uint"/>
    <field name="Attribute 1 WrapShortest Enables" start="388" end="391" type="uint"/>
    <field name="Attribute 0 WrapShortest Enables" start="384" end="387" type="uint"/>
    <field name="Attribute 15 WrapShortest Enables" start="444" end="447" type="uint"/>
    <field name="Attribute 14 WrapShortest Enables" start="440" end="443" type="uint"/>
    <field name="Attribute 13 WrapShortest Enables" start="436" end="439" type="uint"/>
    <field name="Attribute 12 WrapShortest Enables" start="432" end="435" type="uint"/>
    <field name="Attribute 11 WrapShortest Enables" start="428" end="431" type="uint"/>
    <field name="Attribute 10 WrapShortest Enables" start="424" end="427" type="uint"/>
    <field name="Attribute 9 WrapShortest Enables" start="420" end="423" type="uint"/>
    <field name="Attribute 8 WrapShortest Enables" start="416" end="419" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_SCISSOR_STATE_POINTERS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="15"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Scissor Rect Pointer" start="37" end="63" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_SF" bias="2" length="7">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="19"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="5"/>
    <field name="Depth Buffer Surface Format" start="44" end="46" type="uint">
      <value name="D32_FLOAT_S8X24_UINT" value="0"/>
      <value name="D32_FLOAT" value="1"/>
      <value name="D24_UNORM_S8_UINT" value="2"/>
      <value name="D24_UNORM_X8_UINT" value="3"/>
      <value name="D16_UNORM" value="5"/>
    </field>
    <field name="Legacy Global Depth Bias Enable" start="43" end="43" type="bool"/>
    <field name="Statistics Enable" start="42" end="42" type="bool"/>
    <field name="Global Depth Offset Enable Solid" start="41" end="41" type="bool"/>
    <field name="Global Depth Offset Enable Wireframe" start="40" end="40" type="bool"/>
    <field name="Global Depth Offset Enable Point" start="39" end="39" type="bool"/>
    <field name="FrontFace Fill Mode" start="37" end="38" type="uint" prefix="FILL_MODE">
      <value name="SOLID" value="0"/>
      <value name="WIREFRAME" value="1"/>
      <value name="POINT" value="2"/>
    </field>
    <field name="BackFace Fill Mode" start="35" end="36" type="uint" prefix="FILL_MODE">
      <value name="SOLID" value="0"/>
      <value name="WIREFRAME" value="1"/>
      <value name="POINT" value="2"/>
    </field>
    <field name="Viewport Transform Enable" start="33" end="33" type="bool"/>
    <field name="Front Winding" start="32" end="32" type="uint"/>
    <field name="Anti-Aliasing Enable" start="95" end="95" type="bool"/>
    <field name="Cull Mode" start="93" end="94" type="uint" prefix="CULLMODE">
      <value name="BOTH" value="0"/>
      <value name="NONE" value="1"/>
      <value name="FRONT" value="2"/>
      <value name="BACK" value="3"/>
    </field>
    <field name="Line Width" start="82" end="91" type="u3.7"/>
    <field name="Line End Cap Antialiasing Region Width" start="80" end="81" type="uint">
      <value name="0.5 pixels" value="0"/>
      <value name="1.0 pixels" value="1"/>
      <value name="2.0 pixels" value="2"/>
      <value name="4.0 pixels" value="3"/>
    </field>
    <field name="Line Stipple Enable" start="78" end="78" type="bool"/>
    <field name="Scissor Rectangle Enable" start="75" end="75" type="bool"/>
    <field name="RT Independent Rasterization Enable" start="74" end="74" type="bool"/>
    <field name="Multisample Rasterization  Mode" start="72" end="73" type="uint"/>
    <field name="Last Pixel Enable" start="127" end="127" type="bool"/>
    <field name="Triangle Strip/List Provoking Vertex Select" start="125" end="126" type="uint">
      <value name="Vertex 0" value="0"/>
      <value name="Vertex 1" value="1"/>
      <value name="Vertex 2" value="2"/>
    </field>
    <field name="Line Strip/List Provoking Vertex Select" start="123" end="124" type="uint"/>
    <field name="Triangle Fan Provoking Vertex Select" start="121" end="122" type="uint">
      <value name="Vertex 0" value="0"/>
      <value name="Vertex 1" value="1"/>
      <value name="Vertex 2" value="2"/>
    </field>
    <field name="AA Line Distance Mode" start="110" end="110" type="uint">
      <value name="AALINEDISTANCE_TRUE" value="1"/>
    </field>
    <field name="Vertex Sub Pixel Precision Select" start="108" end="108" type="uint"/>
    <field name="Point Width Source" start="107" end="107" type="uint">
      <value name="Vertex" value="0"/>
      <value name="State" value="1"/>
    </field>
    <field name="Point Width" start="96" end="106" type="u8.3"/>
    <field name="Global Depth Offset Constant" start="128" end="159" type="float"/>
    <field name="Global Depth Offset Scale" start="160" end="191" type="float"/>
    <field name="Global Depth Offset Clamp" start="192" end="223" type="float"/>
  </instruction>

  <instruction name="3DSTATE_SO_BUFFER" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="24"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="2"/>
    <field name="SO Buffer Index" start="61" end="62" type="uint"/>
    <field name="SO Buffer Object Control State" start="57" end="60" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Surface Pitch" start="32" end="43" type="uint"/>
    <field name="Surface Base Address" start="66" end="95" type="address"/>
    <field name="Surface End Address" start="98" end="127" type="address"/>
  </instruction>

  <instruction name="3DSTATE_SO_DECL_LIST" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="23"/>
    <field name="DWord Length" start="0" end="8" type="uint"/>
    <field name="Stream to Buffer Selects [3]" start="44" end="47" type="uint"/>
    <field name="Stream to Buffer Selects [2]" start="40" end="43" type="uint"/>
    <field name="Stream to Buffer Selects [1]" start="36" end="39" type="uint"/>
    <field name="Stream to Buffer Selects [0]" start="32" end="35" type="uint"/>
    <field name="Num Entries [3]" start="88" end="95" type="uint"/>
    <field name="Num Entries [2]" start="80" end="87" type="uint"/>
    <field name="Num Entries [1]" start="72" end="79" type="uint"/>
    <field name="Num Entries [0]" start="64" end="71" type="uint"/>
    <group count="0" start="96" size="64">
      <field name="Entry" start="0" end="63" type="SO_DECL_ENTRY"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_STENCIL_BUFFER" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="6"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Stencil Buffer Enable" start="63" end="63" type="bool"/>
    <field name="Stencil Buffer Object Control State" start="57" end="60" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Stencil Buffer MOCS" start="57" end="60" type="uint"/>
    <field name="Surface Pitch" start="32" end="48" type="uint"/>
    <field name="Surface Base Address" start="64" end="95" type="address"/>
  </instruction>

  <instruction name="3DSTATE_STREAMOUT" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="30"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="SO Function Enable" start="63" end="63" type="bool"/>
    <field name="Rendering Disable" start="62" end="62" type="bool"/>
    <field name="Render Stream Select" start="59" end="60" type="uint"/>
    <field name="Reorder Mode" start="58" end="58" type="uint">
      <value name="LEADING" value="0"/>
      <value name="TRAILING" value="1"/>
    </field>
    <field name="SO Statistics Enable" start="57" end="57" type="bool"/>
    <field name="SO Buffer Enable [3]" start="43" end="43" type="bool"/>
    <field name="SO Buffer Enable [2]" start="42" end="42" type="bool"/>
    <field name="SO Buffer Enable [1]" start="41" end="41" type="bool"/>
    <field name="SO Buffer Enable [0]" start="40" end="40" type="bool"/>
    <field name="Stream 3 Vertex Read Offset" start="93" end="93" type="uint"/>
    <field name="Stream 3 Vertex Read Length" start="88" end="92" type="uint"/>
    <field name="Stream 2 Vertex Read Offset" start="85" end="85" type="uint"/>
    <field name="Stream 2 Vertex Read Length" start="80" end="84" type="uint"/>
    <field name="Stream 1 Vertex Read Offset" start="77" end="77" type="uint"/>
    <field name="Stream 1 Vertex Read Length" start="72" end="76" type="uint"/>
    <field name="Stream 0 Vertex Read Offset" start="69" end="69" type="uint"/>
    <field name="Stream 0 Vertex Read Length" start="64" end="68" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_TE" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="28"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="2"/>
    <field name="Partitioning" start="44" end="45" type="uint">
      <value name="INTEGER" value="0"/>
      <value name="ODD_FRACTIONAL" value="1"/>
      <value name="EVEN_FRACTIONAL" value="2"/>
    </field>
    <field name="Output Topology" start="40" end="41" type="uint" prefix="OUTPUT">
      <value name="POINT" value="0"/>
      <value name="LINE" value="1"/>
      <value name="TRI_CW" value="2"/>
      <value name="TRI_CCW" value="3"/>
    </field>
    <field name="TE Domain" start="36" end="37" type="uint">
      <value name="QUAD" value="0"/>
      <value name="TRI" value="1"/>
      <value name="ISOLINE" value="2"/>
    </field>
    <field name="TE Mode" start="33" end="34" type="uint">
      <value name="HW_TESS" value="0"/>
      <value name="SW_TESS" value="1"/>
    </field>
    <field name="TE Enable" start="32" end="32" type="bool"/>
    <field name="Maximum Tessellation Factor Odd" start="64" end="95" type="float"/>
    <field name="Maximum Tessellation Factor Not Odd" start="96" end="127" type="float"/>
  </instruction>

  <instruction name="3DSTATE_URB_DS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="50"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="DS URB Starting Address" start="57" end="62" type="uint"/>
    <field name="DS URB Entry Allocation Size" start="48" end="56" type="uint"/>
    <field name="DS Number of URB Entries" start="32" end="47" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_URB_GS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="51"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="GS URB Starting Address" start="57" end="62" type="uint"/>
    <field name="GS URB Entry Allocation Size" start="48" end="56" type="uint"/>
    <field name="GS Number of URB Entries" start="32" end="47" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_URB_HS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="49"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="HS URB Starting Address" start="57" end="62" type="uint"/>
    <field name="HS URB Entry Allocation Size" start="48" end="56" type="uint"/>
    <field name="HS Number of URB Entries" start="32" end="47" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_URB_VS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="48"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="VS URB Starting Address" start="57" end="62" type="uint"/>
    <field name="VS URB Entry Allocation Size" start="48" end="56" type="uint"/>
    <field name="VS Number of URB Entries" start="32" end="47" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_VERTEX_BUFFERS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="8"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="3"/>
    <group count="0" start="32" size="128">
      <field name="Vertex Buffer State" start="0" end="127" type="VERTEX_BUFFER_STATE"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_VERTEX_ELEMENTS" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="9"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <group count="0" start="32" size="64">
      <field name="Element" start="0" end="63" type="VERTEX_ELEMENT_STATE"/>
    </group>
  </instruction>

  <instruction name="3DSTATE_VF" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="12"/>
    <field name="Indexed Draw Cut Index Enable" start="8" end="8" type="bool"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Cut Index" start="32" end="63" type="uint"/>
  </instruction>

  <instruction name="3DSTATE_VF_STATISTICS" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="1"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="11"/>
    <field name="Statistics Enable" start="0" end="0" type="bool"/>
  </instruction>

  <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_CC" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="35"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="CC Viewport Pointer" start="37" end="63" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_VIEWPORT_STATE_POINTERS_SF_CLIP" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="33"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="SF Clip Viewport Pointer" start="38" end="63" type="offset"/>
  </instruction>

  <instruction name="3DSTATE_VS" bias="2" length="6">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="16"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="4"/>
    <field name="Kernel Start Pointer" start="38" end="63" type="offset"/>
    <field name="Single Vertex Dispatch" start="95" end="95" type="bool"/>
    <field name="Vector Mask Enable" start="94" end="94" type="bool"/>
    <field name="Sampler Count" start="91" end="93" type="uint">
      <value name="No Samplers" value="0"/>
      <value name="1-4 Samplers" value="1"/>
      <value name="5-8 Samplers" value="2"/>
      <value name="9-12 Samplers" value="3"/>
      <value name="13-16 Samplers" value="4"/>
    </field>
    <field name="Binding Table Entry Count" start="82" end="89" type="uint"/>
    <field name="Thread Priority" start="81" end="81" type="uint">
      <value name="Normal Priority" value="0"/>
      <value name="High Priority" value="1"/>
    </field>
    <field name="Floating Point Mode" start="80" end="80" type="uint">
      <value name="IEEE-754" value="0"/>
      <value name="Alternate" value="1"/>
    </field>
    <field name="Illegal Opcode Exception Enable" start="77" end="77" type="bool"/>
    <field name="VS accesses UAV" start="76" end="76" type="bool"/>
    <field name="Software  Exception Enable" start="71" end="71" type="bool"/>
    <field name="Scratch Space Base Pointer" start="106" end="127" type="address"/>
    <field name="Per-Thread Scratch Space" start="96" end="99" type="uint"/>
    <field name="Dispatch GRF Start Register For URB Data" start="148" end="152" type="uint"/>
    <field name="Vertex URB Entry Read Length" start="139" end="144" type="uint"/>
    <field name="Vertex URB Entry Read Offset" start="132" end="137" type="uint"/>
    <field name="Maximum Number of Threads" start="183" end="191" type="uint"/>
    <field name="Statistics Enable" start="170" end="170" type="bool"/>
    <field name="Vertex Cache Disable" start="161" end="161" type="bool"/>
    <field name="Function Enable" start="160" end="160" type="bool"/>
  </instruction>

  <instruction name="3DSTATE_WM" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="20"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Statistics Enable" start="63" end="63" type="bool"/>
    <field name="Depth Buffer Clear" start="62" end="62" type="bool"/>
    <field name="Thread Dispatch Enable" start="61" end="61" type="bool"/>
    <field name="Depth Buffer Resolve Enable" start="60" end="60" type="bool"/>
    <field name="Hierarchical Depth Buffer Resolve Enable" start="59" end="59" type="bool"/>
    <field name="Legacy Diamond Line Rasterization" start="58" end="58" type="bool"/>
    <field name="Pixel Shader Kills Pixel" start="57" end="57" type="bool"/>
    <field name="Pixel Shader Computed Depth Mode" start="55" end="56" type="uint">
      <value name="PSCDEPTH_OFF" value="0"/>
      <value name="PSCDEPTH_ON" value="1"/>
      <value name="PSCDEPTH_ON_GE" value="2"/>
      <value name="PSCDEPTH_ON_LE" value="3"/>
    </field>
    <field name="Early Depth/Stencil Control" start="53" end="54" type="uint">
      <value name="EDSC_NORMAL" value="0"/>
      <value name="EDSC_PSEXEC" value="1"/>
      <value name="EDSC_PREPS" value="2"/>
    </field>
    <field name="Pixel Shader Uses Source Depth" start="52" end="52" type="bool"/>
    <field name="Pixel Shader Uses Source W" start="51" end="51" type="bool"/>
    <field name="Position ZW Interpolation Mode" start="49" end="50" type="uint">
      <value name="INTERP_PIXEL" value="0"/>
      <value name="INTERP_CENTROID" value="2"/>
      <value name="INTERP_SAMPLE" value="3"/>
    </field>
    <field name="Barycentric Interpolation Mode" start="43" end="48" type="uint">
      <value name="BIM_PERSPECTIVE_PIXEL" value="1"/>
      <value name="BIM_PERSPECTIVE_CENTROID" value ="2"/>
      <value name="BIM_PERSPECTIVE_SAMPLE" value="4"/>
      <value name="BIM_LINEAR_PIXEL" value="8"/>
      <value name="BIM_LINEAR_CENTROID" value="16"/>
      <value name="BIM_LINEAR_SAMPLE" value="32"/>
    </field>
    <field name="Pixel Shader Uses Input Coverage Mask" start="42" end="42" type="bool"/>
    <field name="Line End Cap Antialiasing Region Width" start="40" end="41" type="uint"/>
    <field name="Line Antialiasing Region Width" start="38" end="39" type="uint">
      <value name="0.5 pixels" value="0"/>
      <value name="1.0 pixels" value="1"/>
      <value name="2.0 pixels" value="2"/>
      <value name="4.0 pixels" value="3"/>
    </field>
    <field name="RT Independent Rasterization Enable" start="37" end="37" type="bool"/>
    <field name="Polygon Stipple Enable" start="36" end="36" type="bool"/>
    <field name="Line Stipple Enable" start="35" end="35" type="bool"/>
    <field name="Point Rasterization Rule" start="34" end="34" type="uint">
      <value name="RASTRULE_UPPER_LEFT" value="0"/>
      <value name="RASTRULE_UPPER_RIGHT" value="1"/>
    </field>
    <field name="Multisample Rasterization Mode" start="32" end="33" type="uint">
      <value name="MSRASTMODE_OFF_PIXEL" value="0"/>
      <value name="MSRASTMODE_OFF_PATTERN" value="1"/>
      <value name="MSRASTMODE_ON_PIXEL" value="2"/>
      <value name="MSRASTMODE_ON_PATTERN" value="3"/>
    </field>
    <field name="Multisample Dispatch Mode" start="95" end="95" type="uint">
      <value name="MSDISPMODE_PERSAMPLE" value="0"/>
      <value name="MSDISPMODE_PERPIXEL" value="1"/>
    </field>
    <field name="PS UAV-only" start="94" end="94" type="uint">
      <value name="OFF" value="0"/>
      <value name="ON" value="1"/>
    </field>
  </instruction>

  <instruction name="GPGPU_CSR_BASE_ADDRESS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="0"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="4"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="GPGPU CSR Base Address" start="44" end="63" type="address"/>
  </instruction>

  <instruction name="GPGPU_OBJECT" bias="2" length="8">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
    <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="SubOpcode" start="16" end="23" type="uint" default="4"/>
    <field name="Predicate Enable" start="8" end="8" type="bool"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="6"/>
    <field name="Shared Local Memory Fixed Offset" start="39" end="39" type="uint"/>
    <field name="Interface Descriptor Offset" start="32" end="37" type="uint"/>
    <field name="Shared Local Memory Offset" start="92" end="95" type="uint"/>
    <field name="End of Thread Group" start="88" end="88" type="uint"/>
    <field name="Slice Destination Select" start="83" end="83" type="uint">
      <value name="Slice 0" value="0"/>
      <value name="Slice 1" value="1"/>
    </field>
    <field name="Half-Slice Destination Select" start="81" end="82" type="uint">
      <value name="Half-Slice 1" value="2"/>
      <value name="Half-Slice 0" value="1"/>
      <value name="Either Half-Slice" value="0"/>
    </field>
    <field name="Indirect Data Length" start="64" end="80" type="uint"/>
    <field name="Indirect Data Start Address" start="96" end="127" type="offset"/>
    <field name="Thread Group ID X" start="128" end="159" type="uint"/>
    <field name="Thread Group ID Y" start="160" end="191" type="uint"/>
    <field name="Thread Group ID Z" start="192" end="223" type="uint"/>
    <field name="Execution Mask" start="224" end="255" type="uint"/>
  </instruction>

  <instruction name="GPGPU_WALKER" bias="2" length="11">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
    <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="SubOpcode A" start="16" end="23" type="uint" default="5"/>
    <field name="Indirect Parameter Enable" start="10" end="10" type="bool"/>
    <field name="Predicate Enable" start="8" end="8" type="bool"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="9"/>
    <field name="Interface Descriptor Offset" start="32" end="37" type="uint"/>
    <field name="SIMD Size" start="94" end="95" type="uint">
      <value name="SIMD8" value="0"/>
      <value name="SIMD16" value="1"/>
      <value name="SIMD32" value="2"/>
    </field>
    <field name="Thread Depth Counter Maximum" start="80" end="85" type="uint"/>
    <field name="Thread Height Counter Maximum" start="72" end="77" type="uint"/>
    <field name="Thread Width Counter Maximum" start="64" end="69" type="uint"/>
    <field name="Thread Group ID Starting X" start="96" end="127" type="uint"/>
    <field name="Thread Group ID X Dimension" start="128" end="159" type="uint"/>
    <field name="Thread Group ID Starting Y" start="160" end="191" type="uint"/>
    <field name="Thread Group ID Y Dimension" start="192" end="223" type="uint"/>
    <field name="Thread Group ID Starting Z" start="224" end="255" type="uint"/>
    <field name="Thread Group ID Z Dimension" start="256" end="287" type="uint"/>
    <field name="Right Execution Mask" start="288" end="319" type="uint"/>
    <field name="Bottom Execution Mask" start="320" end="351" type="uint"/>
  </instruction>

  <instruction name="MEDIA_CURBE_LOAD" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
    <field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="SubOpcode" start="16" end="23" type="uint" default="1"/>
    <field name="DWord Length" start="0" end="15" type="uint" default="2"/>
    <field name="CURBE Total Data Length" start="64" end="80" type="uint"/>
    <field name="CURBE Data Start Address" start="96" end="127" type="uint"/>
  </instruction>

  <instruction name="MEDIA_INTERFACE_DESCRIPTOR_LOAD" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
    <field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="SubOpcode" start="16" end="23" type="uint" default="2"/>
    <field name="DWord Length" start="0" end="15" type="uint" default="2"/>
    <field name="Interface Descriptor Total Length" start="64" end="80" type="uint"/>
    <field name="Interface Descriptor Data Start Address" start="96" end="127" type="offset"/>
  </instruction>

  <instruction name="MEDIA_OBJECT" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Media Command Pipeline" start="27" end="28" type="uint" default="2"/>
    <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="Media Command Sub-Opcode" start="16" end="23" type="uint" default="0"/>
    <field name="DWord Length" start="0" end="15" type="uint" default="4"/>
    <field name="Interface Descriptor Offset" start="32" end="37" type="uint"/>
    <field name="Children Present" start="95" end="95" type="bool"/>
    <field name="Thread Synchronization" start="88" end="88" type="uint">
      <value name="No thread synchronization" value="0"/>
      <value name="Thread dispatch is synchronized by the 'spawn root thread' message" value="1"/>
    </field>
    <field name="Use Scoreboard" start="85" end="85" type="uint">
      <value name="Not using scoreboard" value="0"/>
      <value name="Using scoreboard" value="1"/>
    </field>
    <field name="Slice Destination Select" start="83" end="83" type="uint">
      <value name="Slice 0" value="0"/>
      <value name="Slice 1" value="1"/>
      <value name="Either Slice" value="0"/>
    </field>
    <field name="Half-Slice Destination Select" start="81" end="82" type="uint">
      <value name="Half-Slice 1" value="2"/>
      <value name="Half-Slice 0" value="1"/>
      <value name="Either half-slice" value="0"/>
    </field>
    <field name="Indirect Data Length" start="64" end="80" type="uint"/>
    <field name="Indirect Data Start Address" start="96" end="127" type="address"/>
    <field name="Scoredboard Y" start="144" end="152" type="uint"/>
    <field name="Scoreboard X" start="128" end="136" type="uint"/>
    <field name="Scoreboard Color" start="176" end="179" type="uint"/>
    <field name="Scoreboard Mask" start="160" end="167" type="uint"/>
    <group count="0" start="192" size="32">
      <field name="Inline Data" start="0" end="31" type="uint"/>
    </group>
  </instruction>

  <instruction name="MEDIA_OBJECT_PRT" bias="2" length="16">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
    <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="SubOpcode" start="16" end="23" type="uint" default="2"/>
    <field name="DWord Length" start="0" end="15" type="uint" default="14"/>
    <field name="Interface Descriptor Offset" start="32" end="37" type="uint"/>
    <field name="Children Present" start="95" end="95" type="bool"/>
    <field name="PRT_Fence Needed" start="87" end="87" type="bool"/>
    <field name="PRT_FenceType" start="86" end="86" type="uint">
      <value name="Root thread queue" value="0"/>
      <value name="VFE state flush" value="1"/>
    </field>
    <group count="12" start="128" size="32">
      <field name="Inline Data" start="0" end="31" type="uint"/>
    </group>
  </instruction>

  <instruction name="MEDIA_OBJECT_WALKER" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
    <field name="Media Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="SubOpcode" start="16" end="23" type="uint" default="3"/>
    <field name="DWord Length" start="0" end="15" type="uint" default="15"/>
    <field name="Interface Descriptor Offset" start="32" end="37" type="uint"/>
    <field name="Children Present" start="95" end="95" type="uint"/>
    <field name="Thread Synchronization" start="88" end="88" type="uint">
      <value name="No thread synchronization" value="0"/>
      <value name="Thread dispatch is synchronized by the 'spawn root thread' message" value="1"/>
    </field>
    <field name="Use Scoreboard" start="85" end="85" type="uint">
      <value name="Not using scoreboard" value="0"/>
      <value name="Using scoreboard" value="1"/>
    </field>
    <field name="Indirect Data Length" start="64" end="80" type="uint"/>
    <field name="Indirect Data Start Address" start="96" end="127" type="offset"/>
    <field name="Scoreboard Mask" start="160" end="167" type="uint"/>
    <field name="Dual Mode" start="223" end="223" type="uint"/>
    <field name="Repel" start="222" end="222" type="uint"/>
    <field name="Quad Mode" start="221" end="221" type="uint"/>
    <field name="Color Count Minus One" start="216" end="219" type="uint"/>
    <field name="Middle Loop Extra Steps" start="208" end="212" type="uint"/>
    <field name="Local Mid-Loop Unit Y" start="204" end="205" type="int"/>
    <field name="Mid-Loop Unit X" start="200" end="201" type="int"/>
    <field name="Global Loop Exec Count" start="240" end="249" type="uint"/>
    <field name="Local Loop Exec Count" start="224" end="233" type="uint"/>
    <field name="Block Resolution Y" start="272" end="280" type="uint"/>
    <field name="Block Resolution X" start="256" end="264" type="uint"/>
    <field name="Local Start Y" start="304" end="312" type="uint"/>
    <field name="Local Start X" start="288" end="296" type="uint"/>
    <field name="Local Outer Loop Stride Y" start="368" end="377" type="int"/>
    <field name="Local Outer Loop Stride X" start="352" end="361" type="int"/>
    <field name="Local Inner Loop Unit Y" start="400" end="409" type="int"/>
    <field name="Local Inner Loop Unit X" start="384" end="393" type="int"/>
    <field name="Global Resolution Y" start="432" end="440" type="uint"/>
    <field name="Global Resolution X" start="416" end="424" type="uint"/>
    <field name="Global Start Y" start="464" end="473" type="int"/>
    <field name="Global Start X" start="448" end="457" type="int"/>
    <field name="Global Outer Loop Stride Y" start="496" end="505" type="int"/>
    <field name="Global Outer Loop Stride X" start="480" end="489" type="int"/>
    <field name="Global Inner Loop Unit Y" start="528" end="537" type="int"/>
    <field name="Global Inner Loop Unit X" start="512" end="521" type="int"/>
    <group count="0" start="544" size="32">
      <field name="Inline Data" start="0" end="31" type="uint"/>
    </group>
  </instruction>

  <instruction name="MEDIA_STATE_FLUSH" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
    <field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="SubOpcode" start="16" end="23" type="uint" default="4"/>
    <field name="DWord Length" start="0" end="15" type="uint" default="0"/>
    <field name="Disable Preemption" start="40" end="40" type="bool"/>
    <field name="Flush to GO" start="39" end="39" type="bool"/>
    <field name="Watermark Required" start="38" end="38" type="uint"/>
    <field name="Interface Descriptor Offset" start="32" end="37" type="uint"/>
  </instruction>

  <instruction name="MEDIA_VFE_STATE" bias="2" length="8">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Pipeline" start="27" end="28" type="uint" default="2"/>
    <field name="Media Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="SubOpcode" start="16" end="23" type="uint" default="0"/>
    <field name="DWord Length" start="0" end="15" type="uint" default="6"/>
    <field name="Scratch Space Base Pointer" start="42" end="63" type="address"/>
    <field name="Stack Size" start="36" end="39" type="uint"/>
    <field name="Per Thread Scratch Space" start="32" end="35" type="uint"/>
    <field name="Maximum Number of Threads" start="80" end="95" type="uint"/>
    <field name="Number of URB Entries" start="72" end="79" type="uint"/>
    <field name="Reset Gateway Timer" start="71" end="71" type="uint">
      <value name="Maintaining the existing timestamp state" value="0"/>
      <value name="Resetting relative timer and latching the global timestamp" value="1"/>
    </field>
    <field name="Bypass Gateway Control" start="70" end="70" type="uint">
      <value name="Maintaining OpenGateway/ForwardMsg/CloseGateway protocol (legacy mode)" value="0"/>
      <value name="Bypassing OpenGateway/CloseGateway protocol" value="1"/>
    </field>
    <field name="GPGPU Mode" start="66" end="66" type="uint"/>
    <field name="Half-Slice Disable" start="96" end="97" type="uint"/>
    <field name="URB Entry Allocation Size" start="144" end="159" type="uint"/>
    <field name="CURBE Allocation Size" start="128" end="143" type="uint"/>
    <field name="Scoreboard Enable" start="191" end="191" type="uint">
      <value name="Scoreboard disabled" value="0"/>
      <value name="Scoreboard enabled" value="1"/>
    </field>
    <field name="Scoreboard Type" start="190" end="190" type="uint">
      <value name="Stalling Scoreboard" value="0"/>
      <value name="Non-Stalling Scoreboard" value="1"/>
    </field>
    <field name="Scoreboard Mask" start="160" end="167" type="uint"/>
    <field name="Scoreboard 3 Delta Y" start="220" end="223" type="int"/>
    <field name="Scoreboard 3 Delta X" start="216" end="219" type="int"/>
    <field name="Scoreboard 2 Delta Y" start="212" end="215" type="int"/>
    <field name="Scoreboard 2 Delta X" start="208" end="211" type="int"/>
    <field name="Scoreboard 1 Delta Y" start="204" end="207" type="int"/>
    <field name="Scoreboard 1 Delta X" start="200" end="203" type="int"/>
    <field name="Scoreboard 0 Delta Y" start="196" end="199" type="int"/>
    <field name="Scoreboard 0 Delta X" start="192" end="195" type="int"/>
    <field name="Scoreboard 7 Delta Y" start="252" end="255" type="int"/>
    <field name="Scoreboard 7 Delta X" start="248" end="251" type="int"/>
    <field name="Scoreboard 6 Delta Y" start="244" end="247" type="int"/>
    <field name="Scoreboard 6 Delta X" start="240" end="243" type="int"/>
    <field name="Scoreboard 5 Delta Y" start="236" end="239" type="int"/>
    <field name="Scoreboard 5 Delta X" start="232" end="235" type="int"/>
    <field name="Scoreboard 4 Delta Y" start="228" end="231" type="int"/>
    <field name="Scoreboard 4 Delta X" start="224" end="227" type="int"/>
  </instruction>

  <instruction name="MI_ARB_CHECK" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="5"/>
  </instruction>

  <instruction name="MI_ARB_ON_OFF" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="8"/>
    <field name="Arbitration Enable" start="0" end="0" type="bool"/>
  </instruction>

  <instruction name="MI_BATCH_BUFFER_END" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="10"/>
  </instruction>

  <instruction name="MI_BATCH_BUFFER_START" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="49"/>
    <field name="2nd Level Batch Buffer" start="22" end="22" type="uint">
      <value name="1st level batch" value="0"/>
      <value name="2nd level batch" value="1"/>
    </field>
    <field name="Add Offset Enable" start="16" end="16" type="bool"/>
    <field name="Predication Enable" start="15" end="15" type="bool"/>
    <field name="Non-Privileged" start="13" end="13" type="bool"/>
    <field name="Clear Command Buffer Enable" start="11" end="11" type="bool"/>
    <field name="Resource Streamer Enable" start="10" end="10" type="bool"/>
    <field name="Address Space Indicator" start="8" end="8" type="uint" prefix="ASI">
      <value name="GGTT" value="0"/>
      <value name="PPGTT" value="1"/>
    </field>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Batch Buffer Start Address" start="34" end="63" type="address"/>
  </instruction>

  <instruction name="MI_CLFLUSH" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="39"/>
    <field name="Use Global GTT" start="22" end="22" type="bool"/>
    <field name="DWord Length" start="0" end="9" type="uint" default="1"/>
    <field name="Page Base Address" start="44" end="63" type="address"/>
    <field name="Starting Cacheline Offset" start="38" end="43" type="uint"/>
    <field name="Page Base Address High" start="64" end="79" type="address"/>
    <group count="0" start="96" size="32">
      <field name="DW Representing a Half Cache Line" start="0" end="31" type="uint"/>
    </group>
  </instruction>

  <instruction name="MI_CONDITIONAL_BATCH_BUFFER_END" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="54"/>
    <field name="Use Global GTT" start="22" end="22" type="bool"/>
    <field name="Compare Semaphore" start="21" end="21" type="uint" default="0"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Compare Data Dword" start="32" end="63" type="uint"/>
    <field name="Compare Address" start="67" end="95" type="address"/>
  </instruction>

  <instruction name="MI_FLUSH" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="4"/>
    <field name="Indirect State Pointers Disable" start="5" end="5" type="bool"/>
    <field name="Generic Media State Clear" start="4" end="4" type="bool"/>
    <field name="Global Snapshot Count Reset" start="3" end="3" type="uint">
      <value name="Don't Reset" value="0"/>
      <value name="Reset" value="1"/>
    </field>
    <field name="Render Cache Flush Inhibit" start="2" end="2" type="uint">
      <value name="Flush" value="0"/>
      <value name="Don't Flush" value="1"/>
    </field>
    <field name="State/Instruction Cache Invalidate" start="1" end="1" type="uint">
      <value name="Don't Invalidate" value="0"/>
      <value name="Invalidate" value="1"/>
    </field>
  </instruction>

  <instruction name="MI_LOAD_REGISTER_IMM" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="34"/>
    <field name="Byte Write Disables" start="8" end="11" type="uint"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Register Offset" start="34" end="54" type="offset"/>
    <field name="Data DWord" start="64" end="95" type="uint"/>
  </instruction>

  <instruction name="MI_LOAD_REGISTER_MEM" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="41"/>
    <field name="Use Global GTT" start="22" end="22" type="bool"/>
    <field name="Async Mode Enable" start="21" end="21" type="bool"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Register Address" start="34" end="54" type="offset"/>
    <field name="Memory Address" start="66" end="95" type="address"/>
  </instruction>

  <instruction name="MI_LOAD_REGISTER_REG" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="42"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Source Register Address" start="34" end="54" type="offset"/>
    <field name="Destination Register Address" start="66" end="86" type="offset"/>
  </instruction>

  <instruction name="MI_LOAD_SCAN_LINES_EXCL" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="19"/>
    <field name="Display (Plane) Select" start="19" end="21" type="uint">
      <value name="Display Plane A" value="0"/>
      <value name="Display Plane B" value="1"/>
      <value name="Display Plane C" value="4"/>
    </field>
    <field name="DWord Length" start="0" end="5" type="uint" default="0"/>
    <field name="Start Scan Line Number" start="48" end="60" type="uint"/>
    <field name="End Scan Line Number" start="32" end="44" type="uint"/>
  </instruction>

  <instruction name="MI_LOAD_SCAN_LINES_INCL" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="18"/>
    <field name="Display (Plane) Select" start="19" end="21" type="uint">
      <value name="Display Plane A" value="0"/>
      <value name="Display Plane B" value="1"/>
      <value name="Display Plane C" value="4"/>
    </field>
    <field name="DWord Length" start="0" end="5" type="uint" default="0"/>
    <field name="Start Scan Line Number" start="48" end="60" type="uint"/>
    <field name="End Scan Line Number" start="32" end="44" type="uint"/>
  </instruction>

  <instruction name="MI_LOAD_URB_MEM" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="44"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="URB Address" start="34" end="46" type="uint"/>
    <field name="Memory Address" start="70" end="95" type="address"/>
  </instruction>

  <instruction name="MI_MATH" bias="2">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="26"/>
    <field name="DWord Length" start="0" end="5" type="uint" default="0"/>
    <field name="ALU INSTRUCTION 1" start="32" end="63" type="uint"/>
    <field name="ALU INSTRUCTION 2" start="64" end="95" type="uint"/>
    <group count="0" start="96" size="32">
      <field name="ALU INSTRUCTION n" start="0" end="31" type="uint"/>
    </group>
  </instruction>

  <instruction name="MI_NOOP" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="0"/>
    <field name="Identification Number Register Write Enable" start="22" end="22" type="bool"/>
    <field name="Identification Number" start="0" end="21" type="uint"/>
  </instruction>

  <instruction name="MI_PREDICATE" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="12"/>
    <field name="Load Operation" start="6" end="7" type="uint" prefix="LOAD">
      <value name="KEEP" value="0"/>
      <value name="LOAD" value="2"/>
      <value name="LOADINV" value="3"/>
    </field>
    <field name="Combine Operation" start="3" end="4" type="uint" prefix="COMBINE">
      <value name="SET" value="0"/>
      <value name="AND" value="1"/>
      <value name="OR" value="2"/>
      <value name="XOR" value="3"/>
    </field>
    <field name="Compare Operation" start="0" end="1" type="uint" prefix="COMPARE">
      <value name="SRCS_EQUAL" value="2"/>
      <value name="DELTAS_EQUAL" value="3"/>
    </field>
  </instruction>

  <instruction name="MI_REPORT_HEAD" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="7"/>
  </instruction>

  <instruction name="MI_REPORT_PERF_COUNT" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="40"/>
    <field name="DWord Length" start="0" end="5" type="uint" default="1"/>
    <field name="Memory Address" start="38" end="63" type="address"/>
    <field name="Core Mode Enable" start="36" end="36" type="uint"/>
    <field name="Use Global GTT" start="32" end="32" type="bool"/>
    <field name="Report ID" start="64" end="95" type="uint"/>
  </instruction>

  <instruction name="MI_RS_CONTEXT" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="15"/>
    <field name="Resource Streamer Save" start="0" end="0" type="uint" prefix="RS">
      <value name="Restore" value="0"/>
      <value name="Save" value="1"/>
    </field>
  </instruction>

  <instruction name="MI_RS_CONTROL" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="6"/>
    <field name="Resource Streamer Control" start="0" end="0" type="uint" prefix="RS">
      <value name="Stop" value="0"/>
      <value name="Start" value="1"/>
    </field>
  </instruction>

  <instruction name="MI_RS_STORE_DATA_IMM" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="43"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="2"/>
    <field name="Destination Address" start="66" end="95" type="address"/>
    <field name="Core Mode Enable" start="64" end="64" type="uint"/>
    <field name="Data DWord 0" start="96" end="127" type="uint"/>
  </instruction>

  <instruction name="MI_SEMAPHORE_MBOX" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="22"/>
    <field name="Register Select" start="16" end="17" type="uint">
      <value name="RVSYNC" value="0"/>
      <value name="RVESYNC" value="1"/>
      <value name="RBSYNC" value="2"/>
      <value name="Use General Register Select" value="3"/>
    </field>
    <field name="General Register Select" start="8" end="13" type="uint"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Semaphore Data Dword" start="32" end="63" type="uint"/>
  </instruction>

  <instruction name="MI_SET_CONTEXT" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="24"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Logical Context Address" start="44" end="63" type="address"/>
    <field name="Reserved, Must be 1" start="40" end="40" type="uint"/>
    <field name="Core Mode Enable" start="36" end="36" type="bool"/>
    <field name="Resource Streamer State Save Enable" start="35" end="35" type="bool"/>
    <field name="Resource Streamer State Restore Enable" start="34" end="34" type="bool"/>
    <field name="Force Restore" start="33" end="33" type="uint"/>
    <field name="Restore Inhibit" start="32" end="32" type="uint"/>
  </instruction>

  <instruction name="MI_SET_PREDICATE" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="1"/>
    <field name="PREDICATE ENABLE" start="0" end="1" type="bool" default="6"/>
  </instruction>

  <instruction name="MI_STORE_DATA_IMM" bias="2" length="4">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="32"/>
    <field name="Use Global GTT" start="22" end="22" type="bool"/>
    <field name="DWord Length" start="0" end="5" type="uint" default="2"/>
    <field name="Address" start="66" end="95" type="uint"/>
    <field name="Core Mode Enable" start="64" end="64" type="uint"/>
    <field name="Data DWord 0" start="96" end="127" type="uint"/>
    <field name="Data DWord 1" start="128" end="159" type="uint"/>
  </instruction>

  <instruction name="MI_STORE_DATA_INDEX" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="33"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Offset" start="34" end="43" type="uint"/>
    <field name="Data DWord 0" start="64" end="95" type="uint"/>
    <field name="Data DWord 1" start="96" end="127" type="uint"/>
  </instruction>

  <instruction name="MI_STORE_REGISTER_MEM" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="36"/>
    <field name="Use Global GTT" start="22" end="22" type="bool"/>
    <field name="Predicate Enable" start="21" end="21" type="bool"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="Register Address" start="34" end="54" type="offset"/>
    <field name="Memory Address" start="66" end="95" type="address"/>
  </instruction>

  <instruction name="MI_STORE_URB_MEM" bias="2" length="3">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="45"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="1"/>
    <field name="URB Address" start="34" end="46" type="uint"/>
    <field name="Memory Address" start="70" end="95" type="address"/>
  </instruction>

  <instruction name="MI_SUSPEND_FLUSH" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="11"/>
    <field name="Suspend Flush" start="0" end="0" type="bool"/>
  </instruction>

  <instruction name="MI_TOPOLOGY_FILTER" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="13"/>
    <field name="Topology Filter Value" start="0" end="5" type="3D_Prim_Topo_Type"/>
  </instruction>

  <instruction name="MI_URB_ATOMIC_ALLOC" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="9"/>
    <field name="URB Atomic Storage Offset" start="12" end="19" type="uint"/>
    <field name="URB Atomic Storage Size" start="0" end="8" type="uint"/>
  </instruction>

  <instruction name="MI_URB_CLEAR" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="25"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="URB Clear Length" start="48" end="61" type="uint"/>
    <field name="URB Address" start="32" end="46" type="offset"/>
  </instruction>

  <instruction name="MI_USER_INTERRUPT" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="2"/>
  </instruction>

  <instruction name="MI_WAIT_FOR_EVENT" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="0"/>
    <field name="MI Command Opcode" start="23" end="28" type="uint" default="3"/>
    <field name="Display Pipe C Horizontal Blank Wait Enable" start="22" end="22" type="bool"/>
    <field name="Display Pipe C Vertical Blank Wait Enable" start="21" end="21" type="bool"/>
    <field name="Display Sprite C Flip Pending Wait Enable" start="20" end="20" type="bool"/>
    <field name="Condition Code Wait Select" start="16" end="19" type="uint">
      <value name="Not enabled" value="0"/>
    </field>
    <field name="Display Plane C Flip Pending Wait Enable" start="15" end="15" type="bool"/>
    <field name="Display Pipe C Scan Line Wait Enable" start="14" end="14" type="bool"/>
    <field name="Display Pipe B Horizontal Blank Wait Enable" start="13" end="13" type="bool"/>
    <field name="Display Pipe B Vertical Blank Wait Enable" start="11" end="11" type="bool"/>
    <field name="Display Sprite B Flip Pending Wait Enable" start="10" end="10" type="bool"/>
    <field name="Display Plane B Flip Pending Wait Enable" start="9" end="9" type="bool"/>
    <field name="Display Pipe B Scan Line Wait Enable" start="8" end="8" type="bool"/>
    <field name="Display Pipe A Horizontal Blank Wait Enable" start="5" end="5" type="bool"/>
    <field name="Display Pipe A Vertical Blank Wait Enable" start="3" end="3" type="bool"/>
    <field name="Display Sprite A Flip Pending Wait Enable" start="2" end="2" type="bool"/>
    <field name="Display Plane A Flip Pending Wait Enable" start="1" end="1" type="bool"/>
    <field name="Display Pipe A Scan Line Wait Enable" start="0" end="0" type="bool"/>
  </instruction>

  <instruction name="PIPELINE_SELECT" bias="1" length="1">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="1"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="4"/>
    <field name="Pipeline Selection" start="0" end="1" type="uint">
      <value name="3D" value="0"/>
      <value name="Media" value="1"/>
      <value name="GPGPU" value="2"/>
    </field>
  </instruction>

  <instruction name="PIPE_CONTROL" bias="2" length="5">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="3"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="2"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="0"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="3"/>
    <field name="Destination Address Type" start="56" end="56" type="uint" prefix="DAT">
      <value name="PPGTT" value="0"/>
      <value name="GGTT" value="1"/>
    </field>
    <field name="LRI Post Sync Operation" start="55" end="55" type="uint">
      <value name="No LRI Operation" value="0"/>
      <value name="MMIO Write Immediate Data" value="1"/>
    </field>
    <field name="Store Data Index" start="53" end="53" type="uint"/>
    <field name="Command Streamer Stall Enable" start="52" end="52" type="bool"/>
    <field name="Global Snapshot Count Reset" start="51" end="51" type="bool"/>
    <field name="TLB Invalidate" start="50" end="50" type="bool"/>
    <field name="Generic Media State Clear" start="48" end="48" type="bool"/>
    <field name="Post Sync Operation" start="46" end="47" type="uint">
      <value name="No Write" value="0"/>
      <value name="Write Immediate Data" value="1"/>
      <value name="Write PS Depth Count" value="2"/>
      <value name="Write Timestamp" value="3"/>
    </field>
    <field name="Depth Stall Enable" start="45" end="45" type="bool"/>
    <field name="Render Target Cache Flush Enable" start="44" end="44" type="bool"/>
    <field name="Instruction Cache Invalidate Enable" start="43" end="43" type="bool"/>
    <field name="Texture Cache Invalidation Enable" start="42" end="42" type="bool"/>
    <field name="Indirect State Pointers Disable" start="41" end="41" type="bool"/>
    <field name="Notify Enable" start="40" end="40" type="bool"/>
    <field name="Pipe Control Flush Enable" start="39" end="39" type="bool"/>
    <field name="DC  Flush Enable" start="37" end="37" type="bool"/>
    <field name="VF Cache Invalidation Enable" start="36" end="36" type="bool"/>
    <field name="Constant Cache Invalidation Enable" start="35" end="35" type="bool"/>
    <field name="State Cache Invalidation Enable" start="34" end="34" type="bool"/>
    <field name="Stall At Pixel Scoreboard" start="33" end="33" type="bool"/>
    <field name="Depth Cache Flush Enable" start="32" end="32" type="bool"/>
    <field name="Address" start="66" end="95" type="address"/>
    <field name="Immediate Data" start="96" end="159" type="uint"/>
  </instruction>

  <instruction name="STATE_BASE_ADDRESS" bias="2" length="10">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="0"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="1"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="8"/>
    <field name="General State Base Address" start="44" end="63" type="address"/>
    <field name="General State Memory Object Control State" start="40" end="43" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Stateless Data Port Access Memory Object Control State" start="36" end="39" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="General State Base Address Modify Enable" start="32" end="32" type="bool"/>
    <field name="Surface State Base Address" start="76" end="95" type="address"/>
    <field name="Surface State Memory Object Control State" start="72" end="75" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Surface State Base Address Modify Enable" start="64" end="64" type="bool"/>
    <field name="Dynamic State Base Address" start="108" end="127" type="address"/>
    <field name="Dynamic State Memory Object Control State" start="104" end="107" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Dynamic State Base Address Modify Enable" start="96" end="96" type="bool"/>
    <field name="Indirect Object Base Address" start="140" end="159" type="address"/>
    <field name="Indirect Object Memory Object Control State" start="136" end="139" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Indirect Object Base Address Modify Enable" start="128" end="128" type="bool"/>
    <field name="Instruction Base Address" start="172" end="191" type="address"/>
    <field name="Instruction Memory Object Control State" start="168" end="171" type="MEMORY_OBJECT_CONTROL_STATE"/>
    <field name="Instruction Base Address Modify Enable" start="160" end="160" type="bool"/>
    <field name="General State Access Upper Bound" start="204" end="223" type="address"/>
    <field name="General State Access Upper Bound Modify Enable" start="192" end="192" type="bool"/>
    <field name="Dynamic State Access Upper Bound" start="236" end="255" type="address"/>
    <field name="Dynamic State Access Upper Bound Modify Enable" start="224" end="224" type="bool"/>
    <field name="Indirect Object Access Upper Bound" start="268" end="287" type="address"/>
    <field name="Indirect Object Access Upper Bound Modify Enable" start="256" end="256" type="bool"/>
    <field name="Instruction Access Upper Bound" start="300" end="319" type="address"/>
    <field name="Instruction Access Upper Bound Modify Enable" start="288" end="288" type="bool"/>
  </instruction>

  <instruction name="STATE_PREFETCH" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="0"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="0"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="3"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="Prefetch Pointer" start="38" end="63" type="address"/>
    <field name="Prefetch Count" start="32" end="34" type="uint"/>
  </instruction>

  <instruction name="STATE_SIP" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="0"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="2"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="System Instruction Pointer" start="36" end="63" type="offset"/>
  </instruction>

  <instruction name="SWTESS_BASE_ADDRESS" bias="2" length="2">
    <field name="Command Type" start="29" end="31" type="uint" default="3"/>
    <field name="Command SubType" start="27" end="28" type="uint" default="0"/>
    <field name="3D Command Opcode" start="24" end="26" type="uint" default="1"/>
    <field name="3D Command Sub Opcode" start="16" end="23" type="uint" default="3"/>
    <field name="DWord Length" start="0" end="7" type="uint" default="0"/>
    <field name="SW Tessellation Base Address" start="44" end="63" type="address"/>
    <field name="SW Tessellation Memory Object Control State" start="40" end="43" type="MEMORY_OBJECT_CONTROL_STATE"/>
  </instruction>

  <register name="L3SQCREG1" length="1" num="0xb010">
    <field name="Convert DC_UC" start="24" end="24" type="uint"/>
    <field name="Convert IS_UC" start="25" end="25" type="uint"/>
    <field name="Convert C_UC" start="26" end="26" type="uint"/>
    <field name="Convert T_UC" start="27" end="27" type="uint"/>
  </register>

  <register name="L3CNTLREG2" length="1" num="0xb020">
    <field name="SLM Enable" start="0" end="0" type="uint"/>
    <field name="URB Allocation" start="1" end="6" type="uint"/>
    <field name="URB Low Bandwidth" start="7" end="7" type="uint"/>
    <field name="RO Allocation" start="14" end="19" type="uint"/>
    <field name="RO Low Bandwidth" start="20" end="20" type="uint"/>
    <field name="DC Allocation" start="21" end="26" type="uint"/>
    <field name="DC Low Bandwidth" start="27" end="27" type="uint"/>
  </register>

  <register name="L3CNTLREG3" length="1" num="0xb024">
    <field name="IS Allocation" start="1" end="6" type="uint"/>
    <field name="IS Low Bandwidth" start="7" end="7" type="uint"/>
    <field name="C Allocation" start="8" end="13" type="uint"/>
    <field name="C Low Bandwidth" start="14" end="14" type="uint"/>
    <field name="T Allocation" start="15" end="20" type="uint"/>
    <field name="T Low Bandwidth" start="21" end="21" type="uint"/>
  </register>

  <register name="SCRATCH1" length="1" num="0xb038">
    <field name="L3 Atomic Disable" start="27" end="27" type="uint"/>
  </register>

  <register name="CHICKEN3" length="1" num="0xe49c">
    <field name="L3 Atomic Disable" start="6" end="6" type="uint"/>
    <field name="L3 Atomic Disable Mask" start="22" end="22" type="uint"/>
  </register>

  <register name="SO_WRITE_OFFSET0" length="1" num="0x5280">
    <field name="Write Offset" start="2" end="31" type="offset"/>
  </register>

  <register name="SO_WRITE_OFFSET1" length="1" num="0x5284">
    <field name="Write Offset" start="2" end="31" type="offset"/>
  </register>

  <register name="SO_WRITE_OFFSET2" length="1" num="0x5288">
    <field name="Write Offset" start="2" end="31" type="offset"/>
  </register>

  <register name="SO_WRITE_OFFSET3" length="1" num="0x528c">
    <field name="Write Offset" start="2" end="31" type="offset"/>
  </register>

</genxml>