diff --git a/src/panfrost/bifrost/bi_pack.c b/src/panfrost/bifrost/bi_pack.c
index 4d10cf5..f368796 100644
--- a/src/panfrost/bifrost/bi_pack.c
+++ b/src/panfrost/bifrost/bi_pack.c
@@ -174,8 +174,8 @@
                         /* XXX: HACK UNTIL WE HAVE HI MATCHING DUE TO OVERFLOW XXX */
                         ins->src[s] = BIR_INDEX_PASS | BIFROST_SRC_CONST_HI;
                 } else if (ins->src[s] & BIR_INDEX_ZERO && !fast_zero) {
-                        /* FMAs have a fast zero port, ADD needs to use the
-                         * uniform/const port's special 0 mode handled here */
+                        /* FMAs have a fast zero slot, ADD needs to use the
+                         * uniform/const slot's special 0 mode handled here */
                         unsigned f = 0;
 
                         if (assigned && regs->uniform_constant != f)
@@ -206,10 +206,10 @@
         bi_assign_uniform_constant_single(regs, clause, bundle.add, assigned, false);
 }
 
-/* Assigns a port for reading, before anything is written */
+/* Assigns a slot for reading, before anything is written */
 
 static void
-bi_assign_port_read(bi_registers *regs, unsigned src)
+bi_assign_slot_read(bi_registers *regs, unsigned src)
 {
         /* We only assign for registers */
         if (!(src & BIR_INDEX_REGISTER))
@@ -217,39 +217,39 @@
 
         unsigned reg = src & ~BIR_INDEX_REGISTER;
 
-        /* Check if we already assigned the port */
+        /* Check if we already assigned the slot */
         for (unsigned i = 0; i <= 1; ++i) {
-                if (regs->port[i] == reg && regs->enabled[i])
+                if (regs->slot[i] == reg && regs->enabled[i])
                         return;
         }
 
-        if (regs->port[3] == reg && regs->read_port3)
+        if (regs->slot[3] == reg && regs->read_slot3)
                 return;
 
         /* Assign it now */
 
         for (unsigned i = 0; i <= 1; ++i) {
                 if (!regs->enabled[i]) {
-                        regs->port[i] = reg;
+                        regs->slot[i] = reg;
                         regs->enabled[i] = true;
                         return;
                 }
         }
 
-        if (!regs->read_port3) {
-                regs->port[3] = reg;
-                regs->read_port3 = true;
+        if (!regs->read_slot3) {
+                regs->slot[3] = reg;
+                regs->read_slot3 = true;
                 return;
         }
 
-        bi_print_ports(regs, stderr);
-        unreachable("Failed to find a free port for src");
+        bi_print_slots(regs, stderr);
+        unreachable("Failed to find a free slot for src");
 }
 
 static bi_registers
-bi_assign_ports(bi_bundle *now, bi_bundle *prev)
+bi_assign_slots(bi_bundle *now, bi_bundle *prev)
 {
-        /* We assign ports for the main register mechanism. Special ops
+        /* We assign slots for the main register mechanism. Special ops
          * use the data registers, which has its own mechanism entirely
          * and thus gets skipped over here. */
 
@@ -263,19 +263,19 @@
 
         if (now->fma)
                 bi_foreach_src(now->fma, src)
-                        bi_assign_port_read(&now->regs, now->fma->src[src]);
+                        bi_assign_slot_read(&now->regs, now->fma->src[src]);
 
         if (now->add) {
                 bi_foreach_src(now->add, src) {
                         if (!(src == 0 && read_dreg))
-                                bi_assign_port_read(&now->regs, now->add->src[src]);
+                                bi_assign_slot_read(&now->regs, now->add->src[src]);
                 }
         }
 
         /* Next, assign writes */
 
         if (prev->add && prev->add->dest & BIR_INDEX_REGISTER && !write_dreg) {
-                now->regs.port[2] = prev->add->dest & ~BIR_INDEX_REGISTER;
+                now->regs.slot[2] = prev->add->dest & ~BIR_INDEX_REGISTER;
                 now->regs.write_add = true;
         }
 
@@ -284,10 +284,10 @@
 
                 if (now->regs.write_add) {
                         /* Scheduler constraint: cannot read 3 and write 2 */
-                        assert(!now->regs.read_port3);
-                        now->regs.port[3] = r;
+                        assert(!now->regs.read_slot3);
+                        now->regs.slot[3] = r;
                 } else {
-                        now->regs.port[2] = r;
+                        now->regs.slot[2] = r;
                 }
 
                 now->regs.write_fma = true;
@@ -303,20 +303,20 @@
 {
         if (r.write_fma) {
                 if (r.write_add) {
-                        assert(!r.read_port3);
+                        assert(!r.read_slot3);
                         return BIFROST_WRITE_ADD_P2_FMA_P3;
                 } else {
-                        if (r.read_port3)
+                        if (r.read_slot3)
                                 return BIFROST_WRITE_FMA_P2_READ_P3;
                         else
                                 return BIFROST_WRITE_FMA_P2;
                 }
         } else if (r.write_add) {
-                if (r.read_port3)
+                if (r.read_slot3)
                         return BIFROST_WRITE_ADD_P2_READ_P3;
                 else
                         return BIFROST_WRITE_ADD_P2;
-        } else if (r.read_port3)
+        } else if (r.read_slot3)
                 return BIFROST_READ_P3;
         else
                 return BIFROST_REG_NONE;
@@ -350,52 +350,52 @@
 
         if (regs.enabled[1]) {
                 /* Gotta save that bit!~ Required by the 63-x trick */
-                assert(regs.port[1] > regs.port[0]);
+                assert(regs.slot[1] > regs.slot[0]);
                 assert(regs.enabled[0]);
 
                 /* Do the 63-x trick, see docs/disasm */
-                if (regs.port[0] > 31) {
-                        regs.port[0] = 63 - regs.port[0];
-                        regs.port[1] = 63 - regs.port[1];
+                if (regs.slot[0] > 31) {
+                        regs.slot[0] = 63 - regs.slot[0];
+                        regs.slot[1] = 63 - regs.slot[1];
                 }
 
-                assert(regs.port[0] <= 31);
-                assert(regs.port[1] <= 63);
+                assert(regs.slot[0] <= 31);
+                assert(regs.slot[1] <= 63);
 
                 s.ctrl = ctrl;
-                s.reg1 = regs.port[1];
-                s.reg0 = regs.port[0];
+                s.reg1 = regs.slot[1];
+                s.reg0 = regs.slot[0];
         } else {
-                /* Port 1 disabled, so set to zero and use port 1 for ctrl */
+                /* slot 1 disabled, so set to zero and use slot 1 for ctrl */
                 s.ctrl = 0;
                 s.reg1 = ctrl << 2;
 
                 if (regs.enabled[0]) {
-                        /* Bit 0 upper bit of port 0 */
-                        s.reg1 |= (regs.port[0] >> 5);
+                        /* Bit 0 upper bit of slot 0 */
+                        s.reg1 |= (regs.slot[0] >> 5);
 
-                        /* Rest of port 0 in usual spot */
-                        s.reg0 = (regs.port[0] & 0b11111);
+                        /* Rest of slot 0 in usual spot */
+                        s.reg0 = (regs.slot[0] & 0b11111);
                 } else {
-                        /* Bit 1 set if port 0 also disabled */
+                        /* Bit 1 set if slot 0 also disabled */
                         s.reg1 |= (1 << 1);
                 }
         }
 
-        /* When port 3 isn't used, we have to set it to port 2, and vice versa,
+        /* When slot 3 isn't used, we have to set it to slot 2, and vice versa,
          * or INSTR_INVALID_ENC is raised. The reason is unknown. */
 
-        bool has_port2 = regs.write_fma || regs.write_add;
-        bool has_port3 = regs.read_port3 || (regs.write_fma && regs.write_add);
+        bool has_slot2 = regs.write_fma || regs.write_add;
+        bool has_slot3 = regs.read_slot3 || (regs.write_fma && regs.write_add);
 
-        if (!has_port3)
-                regs.port[3] = regs.port[2];
+        if (!has_slot3)
+                regs.slot[3] = regs.slot[2];
 
-        if (!has_port2)
-                regs.port[2] = regs.port[3];
+        if (!has_slot2)
+                regs.slot[2] = regs.slot[3];
 
-        s.reg2 = regs.port[3];
-        s.reg3 = regs.port[2];
+        s.reg2 = regs.slot[3];
+        s.reg3 = regs.slot[2];
         s.uniform_const = regs.uniform_constant;
 
         memcpy(&packed, &s, sizeof(s));
@@ -605,14 +605,14 @@
         }
 
         /* EQ swap to NE */
-        bool port_swapped = false;
+        bool slot_swapped = false;
 
-        /* We assigned the constant port to fetch the branch offset so we can
+        /* We assigned the constant slot to fetch the branch offset so we can
          * just passthrough here. We put in the HI slot to match the blob since
          * that's where the magic flags end up */
         struct bifrost_branch pack = {
                 .src0 = bi_get_src(ins, regs, 0),
-                .src1 = (zero_ctrl << 1) | !port_swapped,
+                .src1 = (zero_ctrl << 1) | !slot_swapped,
                 .src2 = BIFROST_SRC_CONST_HI,
                 .cond = BR_COND_EQ,
                 .size = BR_SIZE_ZERO,
@@ -876,16 +876,16 @@
         uint64_t hi;
 };
 
-/* We must ensure port 1 > port 0 for the 63-x trick to function, so we fix
+/* We must ensure slot 1 > slot 0 for the 63-x trick to function, so we fix
  * this up at pack time. (Scheduling doesn't care.) */
 
 static void
-bi_flip_ports(bi_registers *regs)
+bi_flip_slots(bi_registers *regs)
 {
-        if (regs->enabled[0] && regs->enabled[1] && regs->port[1] < regs->port[0]) {
-                unsigned temp = regs->port[0];
-                regs->port[0] = regs->port[1];
-                regs->port[1] = temp;
+        if (regs->enabled[0] && regs->enabled[1] && regs->slot[1] < regs->slot[0]) {
+                unsigned temp = regs->slot[0];
+                regs->slot[0] = regs->slot[1];
+                regs->slot[1] = temp;
         }
 
 }
@@ -893,11 +893,11 @@
 static struct bi_packed_bundle
 bi_pack_bundle(bi_clause *clause, bi_bundle bundle, bi_bundle prev, bool first_bundle, gl_shader_stage stage)
 {
-        bi_assign_ports(&bundle, &prev);
+        bi_assign_slots(&bundle, &prev);
         bi_assign_uniform_constant(clause, &bundle.regs, bundle);
         bundle.regs.first_instruction = first_bundle;
 
-        bi_flip_ports(&bundle.regs);
+        bi_flip_slots(&bundle.regs);
 
         uint64_t reg = bi_pack_registers(bundle.regs);
         uint64_t fma = bi_pack_fma(clause, bundle, &bundle.regs);
diff --git a/src/panfrost/bifrost/bi_pack_helpers.h b/src/panfrost/bifrost/bi_pack_helpers.h
index d806d33..aee8dde 100644
--- a/src/panfrost/bifrost/bi_pack_helpers.h
+++ b/src/panfrost/bifrost/bi_pack_helpers.h
@@ -50,15 +50,15 @@
 }
 
 static inline enum bifrost_packed_src
-bi_get_src_reg_port(bi_registers *regs, unsigned src)
+bi_get_src_reg_slot(bi_registers *regs, unsigned src)
 {
         unsigned reg = src & ~BIR_INDEX_REGISTER;
 
-        if (regs->port[0] == reg && regs->enabled[0])
+        if (regs->slot[0] == reg && regs->enabled[0])
                 return BIFROST_SRC_PORT0;
-        else if (regs->port[1] == reg && regs->enabled[1])
+        else if (regs->slot[1] == reg && regs->enabled[1])
                 return BIFROST_SRC_PORT1;
-        else if (regs->port[3] == reg && regs->read_port3)
+        else if (regs->slot[3] == reg && regs->read_slot3)
                 return BIFROST_SRC_PORT3;
         else
                 unreachable("Tried to access register with no port");
@@ -70,7 +70,7 @@
         unsigned src = ins->src[s];
 
         if (src & BIR_INDEX_REGISTER)
-                return bi_get_src_reg_port(regs, src);
+                return bi_get_src_reg_slot(regs, src);
         else if (src & BIR_INDEX_PASS)
                 return src & ~BIR_INDEX_PASS;
         else {
diff --git a/src/panfrost/bifrost/bi_print.c b/src/panfrost/bifrost/bi_print.c
index 2b5dd8c..1c99fa6 100644
--- a/src/panfrost/bifrost/bi_print.c
+++ b/src/panfrost/bifrost/bi_print.c
@@ -344,23 +344,23 @@
 }
 
 void
-bi_print_ports(bi_registers *regs, FILE *fp)
+bi_print_slots(bi_registers *regs, FILE *fp)
 {
         for (unsigned i = 0; i < 2; ++i) {
                 if (regs->enabled[i])
-                        fprintf(fp, "port %u: %u\n", i, regs->port[i]);
+                        fprintf(fp, "slot %u: %u\n", i, regs->slot[i]);
         }
 
         if (regs->write_fma || regs->write_add) {
-                fprintf(fp, "port 2 (%s): %u\n",
+                fprintf(fp, "slot 2 (%s): %u\n",
                                 regs->write_add ? "ADD" : "FMA",
-                                regs->port[2]);
+                                regs->slot[2]);
         }
 
-        if ((regs->write_fma && regs->write_add) || regs->read_port3) {
-                fprintf(fp, "port 3 (%s): %u\n",
-                                regs->read_port3 ? "read" : "FMA",
-                                regs->port[3]);
+        if ((regs->write_fma && regs->write_add) || regs->read_slot3) {
+                fprintf(fp, "slot 3 (%s): %u\n",
+                                regs->read_slot3 ? "read" : "FMA",
+                                regs->slot[3]);
         }
 }
 
diff --git a/src/panfrost/bifrost/bi_print.h b/src/panfrost/bifrost/bi_print.h
index aa90a17..e6cc868 100644
--- a/src/panfrost/bifrost/bi_print.h
+++ b/src/panfrost/bifrost/bi_print.h
@@ -45,7 +45,7 @@
 const char * bi_tex_op_name(enum bi_tex_op op);
 
 void bi_print_instruction(bi_instruction *ins, FILE *fp);
-void bi_print_ports(bi_registers *regs, FILE *fp);
+void bi_print_slots(bi_registers *regs, FILE *fp);
 void bi_print_bundle(bi_bundle *bundle, FILE *fp);
 void bi_print_clause(bi_clause *clause, FILE *fp);
 void bi_print_block(bi_block *block, FILE *fp);
diff --git a/src/panfrost/bifrost/bi_schedule.c b/src/panfrost/bifrost/bi_schedule.c
index 066d345..2ff1d50 100644
--- a/src/panfrost/bifrost/bi_schedule.c
+++ b/src/panfrost/bifrost/bi_schedule.c
@@ -85,7 +85,7 @@
 
 /* There is an encoding restriction against FMA fp16 add/min/max
  * having both sources with abs(..) with a duplicated source. This is
- * due to the packing being order-sensitive, so the ports must end up distinct
+ * due to the packing being order-sensitive, so the slots must end up distinct
  * to handle both having abs(..). The swizzle doesn't matter here. Note
  * BIR_INDEX_REGISTER generally should not be used pre-schedule (TODO: enforce
  * this).
@@ -119,7 +119,7 @@
 
 /* Lowers FMOV to ADD #0, since FMOV doesn't exist on the h/w and this is the
  * latest time it's sane to lower (it's useful to distinguish before, but we'll
- * need this handle during scheduling to ensure the ports get modeled
+ * need this handle during scheduling to ensure the slots get modeled
  * correctly with respect to the new zero source) */
 
 static void
diff --git a/src/panfrost/bifrost/bifrost.h b/src/panfrost/bifrost/bifrost.h
index 8b24360..27c5e75 100644
--- a/src/panfrost/bifrost/bifrost.h
+++ b/src/panfrost/bifrost/bifrost.h
@@ -283,7 +283,7 @@
  * Full, Write Low, Write High), second part behaviour of slot 3, and the last
  * part specifies the source for the write (FMA, ADD, or MIX for FMA/ADD).
  *
- * IDLE is a special mode disabling both ports, except for the first
+ * IDLE is a special mode disabling both slots, except for the first
  * instruction in the clause which uses IDLE_1 for the same purpose.
  *
  * All fields 0 used as sentinel for reserved encoding, so IDLE(_1) have FMA
diff --git a/src/panfrost/bifrost/compiler.h b/src/panfrost/bifrost/compiler.h
index b207a9d..cbe5f3d 100644
--- a/src/panfrost/bifrost/compiler.h
+++ b/src/panfrost/bifrost/compiler.h
@@ -139,7 +139,7 @@
  *
  * We define our own enum of conditions since the conditions in the hardware
  * packed in crazy ways that would make manipulation unweildly (meaning changes
- * based on port swapping, etc), so we defer dealing with that until emit time.
+ * based on slot swapping, etc), so we defer dealing with that until emit time.
  * Likewise, we expose NIR types instead of the crazy branch types, although
  * the restrictions do eventually apply of course. */
 
@@ -342,21 +342,21 @@
         };
 } bi_instruction;
 
-/* Represents the assignment of ports for a given bi_bundle */
+/* Represents the assignment of slots for a given bi_bundle */
 
 typedef struct {
-        /* Register to assign to each port */
-        unsigned port[4];
+        /* Register to assign to each slot */
+        unsigned slot[4];
 
-        /* Read ports can be disabled */
+        /* Read slots can be disabled */
         bool enabled[2];
 
-        /* Should we write FMA? what about ADD? If only a single port is
-         * enabled it is in port 2, else ADD/FMA is 2/3 respectively */
+        /* Should we write FMA? what about ADD? If only a single slot is
+         * enabled it is in slot 2, else ADD/FMA is 2/3 respectively */
         bool write_fma, write_add;
 
-        /* Should we read with port 3? */
-        bool read_port3;
+        /* Should we read with slot 3? */
+        bool read_slot3;
 
         /* Packed uniform/constant */
         uint8_t uniform_constant;
@@ -367,7 +367,7 @@
 
 /* A bi_bundle contains two paired instruction pointers. If a slot is unfilled,
  * leave it NULL; the emitter will fill in a nop. Instructions reference
- * registers via ports which are assigned per bundle.
+ * registers via slots which are assigned per bundle.
  */
 
 typedef struct {