/*
   LZ4 - Fast LZ compression algorithm
   Header File
   Copyright (C) 2011-2014, Yann Collet.
   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions are
   met:

       * Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
       * Redistributions in binary form must reproduce the above
   copyright notice, this list of conditions and the following disclaimer
   in the documentation and/or other materials provided with the
   distribution.

   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

   You can contact the author at :
   - LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
   - LZ4 source repository : http://code.google.com/p/lz4/
*/
#pragma once

#if defined (__cplusplus)
extern "C" {
#endif


/**************************************
   Version
**************************************/
#define LZ4_VERSION_MAJOR    1    /* for major interface/format changes  */
#define LZ4_VERSION_MINOR    2    /* for minor interface/format changes  */
#define LZ4_VERSION_RELEASE  0    /* for tweaks, bug-fixes, or development */


/**************************************
   Compiler Options
**************************************/
#if (defined(__GNUC__) && defined(__STRICT_ANSI__)) || (defined(_MSC_VER) && !defined(__cplusplus))   /* Visual Studio */
#  define inline __inline           /* Visual C is not C99, but supports some kind of inline */
#endif


/**************************************
   Simple Functions
**************************************/

int LZ4_compress        (const char* source, char* dest, int inputSize);
int LZ4_decompress_safe (const char* source, char* dest, int compressedSize, int maxOutputSize);

/*
LZ4_compress() :
    Compresses 'inputSize' bytes from 'source' into 'dest'.
    Destination buffer must be already allocated,
    and must be sized to handle worst cases situations (input data not compressible)
    Worst case size evaluation is provided by function LZ4_compressBound()
    inputSize : Max supported value is LZ4_MAX_INPUT_VALUE
    return : the number of bytes written in buffer dest
             or 0 if the compression fails

LZ4_decompress_safe() :
    maxOutputSize : is the size of the destination buffer (which must be already allocated)
    return : the number of bytes decoded in the destination buffer (necessarily <= maxOutputSize)
             If the source stream is detected malformed, the function will stop decoding and return a negative result.
             This function is protected against buffer overflow exploits (never writes outside of output buffer, and never reads outside of input buffer). Therefore, it is protected against malicious data packets
*/


/**************************************
   Advanced Functions
**************************************/
#define LZ4_MAX_INPUT_SIZE        0x7E000000   /* 2 113 929 216 bytes */
#define LZ4_COMPRESSBOUND(isize)  ((unsigned int)(isize) > (unsigned int)LZ4_MAX_INPUT_SIZE ? 0 : (isize) + ((isize)/255) + 16)

/*
LZ4_compressBound() :
    Provides the maximum size that LZ4 may output in a "worst case" scenario (input data not compressible)
    primarily useful for memory allocation of output buffer.
    inline function is recommended for the general case,
    macro is also provided when result needs to be evaluated at compilation (such as stack memory allocation).

    isize  : is the input size. Max supported value is LZ4_MAX_INPUT_SIZE
    return : maximum output size in a "worst case" scenario
             or 0, if input size is too large ( > LZ4_MAX_INPUT_SIZE)
*/
int LZ4_compressBound(int isize);


/*
LZ4_compress_limitedOutput() :
    Compress 'inputSize' bytes from 'source' into an output buffer 'dest' of maximum size 'maxOutputSize'.
    If it cannot achieve it, compression will stop, and result of the function will be zero.
    This function never writes outside of provided output buffer.

    inputSize  : Max supported value is LZ4_MAX_INPUT_VALUE
    maxOutputSize : is the size of the destination buffer (which must be already allocated)
    return : the number of bytes written in buffer 'dest'
             or 0 if the compression fails
*/
int LZ4_compress_limitedOutput (const char* source, char* dest, int inputSize, int maxOutputSize);


/*
LZ4_decompress_fast() :
    originalSize : is the original and therefore uncompressed size
    return : the number of bytes read from the source buffer (in other words, the compressed size)
             If the source stream is malformed, the function will stop decoding and return a negative result.
    note : This function is a bit faster than LZ4_decompress_safe()
           This function never writes outside of output buffers, but may read beyond input buffer in case of malicious data packet.
           Use this function preferably into a trusted environment (data to decode comes from a trusted source).
           Destination buffer must be already allocated. Its size must be a minimum of 'outputSize' bytes.
*/
int LZ4_decompress_fast (const char* source, char* dest, int originalSize);


/*
LZ4_decompress_safe_partial() :
    This function decompress a compressed block of size 'compressedSize' at position 'source'
    into output buffer 'dest' of size 'maxOutputSize'.
    The function tries to stop decompressing operation as soon as 'targetOutputSize' has been reached,
    reducing decompression time.
    return : the number of bytes decoded in the destination buffer (necessarily <= maxOutputSize)
       Note : this number can be < 'targetOutputSize' should the compressed block to decode be smaller.
             Always control how many bytes were decoded.
             If the source stream is detected malformed, the function will stop decoding and return a negative result.
             This function never writes outside of output buffer, and never reads outside of input buffer. It is therefore protected against malicious data packets
*/
int LZ4_decompress_safe_partial (const char* source, char* dest, int compressedSize, int targetOutputSize, int maxOutputSize);


/*
These functions are provided should you prefer to allocate memory for compression tables with your own allocation methods.
To know how much memory must be allocated for the compression tables, use :
int LZ4_sizeofState();

Note that tables must be aligned on 4-bytes boundaries, otherwise compression will fail (return code 0).

The allocated memory can be provided to the compressions functions using 'void* state' parameter.
LZ4_compress_withState() and LZ4_compress_limitedOutput_withState() are equivalent to previously described functions.
They just use the externally allocated memory area instead of allocating their own one (on stack, or on heap).
*/
int LZ4_sizeofState(void);
int LZ4_compress_withState               (void* state, const char* source, char* dest, int inputSize);
int LZ4_compress_limitedOutput_withState (void* state, const char* source, char* dest, int inputSize, int maxOutputSize);


/**************************************
   Streaming Functions
**************************************/
void* LZ4_create (const char* inputBuffer);
int   LZ4_compress_continue (void* LZ4_Data, const char* source, char* dest, int inputSize);
int   LZ4_compress_limitedOutput_continue (void* LZ4_Data, const char* source, char* dest, int inputSize, int maxOutputSize);
char* LZ4_slideInputBuffer (void* LZ4_Data);
int   LZ4_free (void* LZ4_Data);

/*
These functions allow the compression of chained blocks, where each block benefits from prior 64 KB within preceding blocks.
In order to achieve this, it is necessary to start creating the LZ4 Data Structure, thanks to the function :

void* LZ4_create (const char* inputBuffer);
The result of the function is the (void*) pointer on the LZ4 Data Structure.
This pointer will be needed in all other functions.
If the pointer returned is NULL, then the allocation has failed, and compression must be aborted.
The only parameter 'const char* inputBuffer' must, obviously, point at the beginning of input buffer.
The input buffer must be already allocated, and size at least 192KB.
'inputBuffer' will also be the 'const char* source' of the first block.

All blocks are expected to lay next to each other within the input buffer, starting from 'inputBuffer'.
To compress each block, use either LZ4_compress_continue() or LZ4_compress_limitedOutput_continue().
Their behavior are identical to LZ4_compress() or LZ4_compress_limitedOutput(),
but require the LZ4 Data Structure as their first argument, and check that each block starts right after the previous one.
If next block does not begin immediately after the previous one, the compression will fail (return 0).

When it's no longer possible to lay the next block after the previous one (not enough space left into input buffer), a call to :
char* LZ4_slideInputBuffer(void* LZ4_Data);
must be performed. It will typically copy the latest 64KB of input at the beginning of input buffer.
Note that, for this function to work properly, minimum size of an input buffer must be 192KB.
==> The memory position where the next input data block must start is provided as the result of the function.

Compression can then resume, using LZ4_compress_continue() or LZ4_compress_limitedOutput_continue(), as usual.

When compression is completed, a call to LZ4_free() will release the memory used by the LZ4 Data Structure.
*/


/*
The following functions achieve the same result as :
void* LZ4_create (const char* inputBuffer);

They are provided here to allow the user program to allocate memory using its own routines.

To know how much space must be allocated, use LZ4_sizeofStreamState();
Note also that space must be 4-bytes aligned.

Once space is allocated, you must initialize it using : LZ4_resetStreamState(void* state, const char* inputBuffer);
void* state is a pointer to the space allocated.
It must be aligned on 4-bytes boundaries, and be large enough.
The parameter 'const char* inputBuffer' must, obviously, point at the beginning of input buffer.
The input buffer must be already allocated, and size at least 192KB.
'inputBuffer' will also be the 'const char* source' of the first block.

The same space can be re-used multiple times, just by initializing it each time with LZ4_resetStreamState().
return value of LZ4_resetStreamState() must be 0 is OK.
Any other value means there was an error (typically, pointer is not aligned on 4-bytes boundaries).
*/
int LZ4_sizeofStreamState(void);
int LZ4_resetStreamState(void* state, const char* inputBuffer);


/*
*_withPrefix64k() :
    These decoding functions work the same as their "normal" versions,
    but can also use up to 64KB of data in front of 'char* dest'
    to decode chained blocks.
    The last 64KB of previous block must be present there.
*/
int LZ4_decompress_safe_withPrefix64k (const char* source, char* dest, int compressedSize, int maxOutputSize);
int LZ4_decompress_fast_withPrefix64k (const char* source, char* dest, int originalSize);


/**************************************
   Experimental Functions
**************************************/
/*
*_withDict() :
    These decoding functions work the same as their "normal" versions,
    but can also use up to 64KB of dictionary data
    to decode chained blocks.
*/
int LZ4_decompress_safe_withDict (const char* source, char* dest, int compressedSize, int maxOutputSize, const char* dictStart, int dictSize);
int LZ4_decompress_fast_withDict (const char* source, char* dest, int originalSize, const char* dictStart, int dictSize);


/**************************************
   Obsolete Functions
**************************************/
/*
These functions are deprecated and should no longer be used.
They are provided here for compatibility with existing user programs.
*/
int LZ4_uncompress (const char* source, char* dest, int outputSize);
int LZ4_uncompress_unknownOutputSize (const char* source, char* dest, int isize, int maxOutputSize);


#if defined (__cplusplus)
}
#endif