blob: 4c2acc7745261a4134863561f1b90601ffa5b6a6 [file] [log] [blame]
/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include <math.h>
#include <limits.h>
#include <stdio.h>
#include "./vpx_dsp_rtcd.h"
#include "./vpx_scale_rtcd.h"
#include "block.h"
#include "onyx_int.h"
#include "vpx_dsp/variance.h"
#include "encodeintra.h"
#include "vp8/common/setupintrarecon.h"
#include "vp8/common/systemdependent.h"
#include "mcomp.h"
#include "firstpass.h"
#include "vpx_scale/vpx_scale.h"
#include "encodemb.h"
#include "vp8/common/extend.h"
#include "vpx_mem/vpx_mem.h"
#include "vp8/common/swapyv12buffer.h"
#include "rdopt.h"
#include "vp8/common/quant_common.h"
#include "encodemv.h"
#include "encodeframe.h"
/* #define OUTPUT_FPF 1 */
extern void vp8cx_frame_init_quantizer(VP8_COMP *cpi);
#define GFQ_ADJUSTMENT vp8_gf_boost_qadjustment[Q]
extern int vp8_kf_boost_qadjustment[QINDEX_RANGE];
extern const int vp8_gf_boost_qadjustment[QINDEX_RANGE];
#define IIFACTOR 1.5
#define IIKFACTOR1 1.40
#define IIKFACTOR2 1.5
#define RMAX 14.0
#define GF_RMAX 48.0
#define KF_MB_INTRA_MIN 300
#define GF_MB_INTRA_MIN 200
#define DOUBLE_DIVIDE_CHECK(X) ((X)<0?(X)-.000001:(X)+.000001)
#define POW1 (double)cpi->oxcf.two_pass_vbrbias/100.0
#define POW2 (double)cpi->oxcf.two_pass_vbrbias/100.0
#define NEW_BOOST 1
static int vscale_lookup[7] = {0, 1, 1, 2, 2, 3, 3};
static int hscale_lookup[7] = {0, 0, 1, 1, 2, 2, 3};
static const int cq_level[QINDEX_RANGE] =
{
0,0,1,1,2,3,3,4,4,5,6,6,7,8,8,9,
9,10,11,11,12,13,13,14,15,15,16,17,17,18,19,20,
20,21,22,22,23,24,24,25,26,27,27,28,29,30,30,31,
32,33,33,34,35,36,36,37,38,39,39,40,41,42,42,43,
44,45,46,46,47,48,49,50,50,51,52,53,54,55,55,56,
57,58,59,60,60,61,62,63,64,65,66,67,67,68,69,70,
71,72,73,74,75,75,76,77,78,79,80,81,82,83,84,85,
86,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100
};
static void find_next_key_frame(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame);
/* Resets the first pass file to the given position using a relative seek
* from the current position
*/
static void reset_fpf_position(VP8_COMP *cpi, FIRSTPASS_STATS *Position)
{
cpi->twopass.stats_in = Position;
}
static int lookup_next_frame_stats(VP8_COMP *cpi, FIRSTPASS_STATS *next_frame)
{
if (cpi->twopass.stats_in >= cpi->twopass.stats_in_end)
return EOF;
*next_frame = *cpi->twopass.stats_in;
return 1;
}
/* Read frame stats at an offset from the current position */
static int read_frame_stats( VP8_COMP *cpi,
FIRSTPASS_STATS *frame_stats,
int offset )
{
FIRSTPASS_STATS * fps_ptr = cpi->twopass.stats_in;
/* Check legality of offset */
if ( offset >= 0 )
{
if ( &fps_ptr[offset] >= cpi->twopass.stats_in_end )
return EOF;
}
else if ( offset < 0 )
{
if ( &fps_ptr[offset] < cpi->twopass.stats_in_start )
return EOF;
}
*frame_stats = fps_ptr[offset];
return 1;
}
static int input_stats(VP8_COMP *cpi, FIRSTPASS_STATS *fps)
{
if (cpi->twopass.stats_in >= cpi->twopass.stats_in_end)
return EOF;
*fps = *cpi->twopass.stats_in;
cpi->twopass.stats_in =
(void*)((char *)cpi->twopass.stats_in + sizeof(FIRSTPASS_STATS));
return 1;
}
static void output_stats(const VP8_COMP *cpi,
struct vpx_codec_pkt_list *pktlist,
FIRSTPASS_STATS *stats)
{
struct vpx_codec_cx_pkt pkt;
(void)cpi;
pkt.kind = VPX_CODEC_STATS_PKT;
pkt.data.twopass_stats.buf = stats;
pkt.data.twopass_stats.sz = sizeof(FIRSTPASS_STATS);
vpx_codec_pkt_list_add(pktlist, &pkt);
/* TEMP debug code */
#if OUTPUT_FPF
{
FILE *fpfile;
fpfile = fopen("firstpass.stt", "a");
fprintf(fpfile, "%12.0f %12.0f %12.0f %12.4f %12.4f %12.4f %12.4f"
" %12.4f %12.4f %12.4f %12.4f %12.4f %12.4f %12.4f %12.4f"
" %12.0f %12.0f %12.4f\n",
stats->frame,
stats->intra_error,
stats->coded_error,
stats->ssim_weighted_pred_err,
stats->pcnt_inter,
stats->pcnt_motion,
stats->pcnt_second_ref,
stats->pcnt_neutral,
stats->MVr,
stats->mvr_abs,
stats->MVc,
stats->mvc_abs,
stats->MVrv,
stats->MVcv,
stats->mv_in_out_count,
stats->new_mv_count,
stats->count,
stats->duration);
fclose(fpfile);
}
#endif
}
static void zero_stats(FIRSTPASS_STATS *section)
{
section->frame = 0.0;
section->intra_error = 0.0;
section->coded_error = 0.0;
section->ssim_weighted_pred_err = 0.0;
section->pcnt_inter = 0.0;
section->pcnt_motion = 0.0;
section->pcnt_second_ref = 0.0;
section->pcnt_neutral = 0.0;
section->MVr = 0.0;
section->mvr_abs = 0.0;
section->MVc = 0.0;
section->mvc_abs = 0.0;
section->MVrv = 0.0;
section->MVcv = 0.0;
section->mv_in_out_count = 0.0;
section->new_mv_count = 0.0;
section->count = 0.0;
section->duration = 1.0;
}
static void accumulate_stats(FIRSTPASS_STATS *section, FIRSTPASS_STATS *frame)
{
section->frame += frame->frame;
section->intra_error += frame->intra_error;
section->coded_error += frame->coded_error;
section->ssim_weighted_pred_err += frame->ssim_weighted_pred_err;
section->pcnt_inter += frame->pcnt_inter;
section->pcnt_motion += frame->pcnt_motion;
section->pcnt_second_ref += frame->pcnt_second_ref;
section->pcnt_neutral += frame->pcnt_neutral;
section->MVr += frame->MVr;
section->mvr_abs += frame->mvr_abs;
section->MVc += frame->MVc;
section->mvc_abs += frame->mvc_abs;
section->MVrv += frame->MVrv;
section->MVcv += frame->MVcv;
section->mv_in_out_count += frame->mv_in_out_count;
section->new_mv_count += frame->new_mv_count;
section->count += frame->count;
section->duration += frame->duration;
}
static void subtract_stats(FIRSTPASS_STATS *section, FIRSTPASS_STATS *frame)
{
section->frame -= frame->frame;
section->intra_error -= frame->intra_error;
section->coded_error -= frame->coded_error;
section->ssim_weighted_pred_err -= frame->ssim_weighted_pred_err;
section->pcnt_inter -= frame->pcnt_inter;
section->pcnt_motion -= frame->pcnt_motion;
section->pcnt_second_ref -= frame->pcnt_second_ref;
section->pcnt_neutral -= frame->pcnt_neutral;
section->MVr -= frame->MVr;
section->mvr_abs -= frame->mvr_abs;
section->MVc -= frame->MVc;
section->mvc_abs -= frame->mvc_abs;
section->MVrv -= frame->MVrv;
section->MVcv -= frame->MVcv;
section->mv_in_out_count -= frame->mv_in_out_count;
section->new_mv_count -= frame->new_mv_count;
section->count -= frame->count;
section->duration -= frame->duration;
}
static void avg_stats(FIRSTPASS_STATS *section)
{
if (section->count < 1.0)
return;
section->intra_error /= section->count;
section->coded_error /= section->count;
section->ssim_weighted_pred_err /= section->count;
section->pcnt_inter /= section->count;
section->pcnt_second_ref /= section->count;
section->pcnt_neutral /= section->count;
section->pcnt_motion /= section->count;
section->MVr /= section->count;
section->mvr_abs /= section->count;
section->MVc /= section->count;
section->mvc_abs /= section->count;
section->MVrv /= section->count;
section->MVcv /= section->count;
section->mv_in_out_count /= section->count;
section->duration /= section->count;
}
/* Calculate a modified Error used in distributing bits between easier
* and harder frames
*/
static double calculate_modified_err(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
{
double av_err = ( cpi->twopass.total_stats.ssim_weighted_pred_err /
cpi->twopass.total_stats.count );
double this_err = this_frame->ssim_weighted_pred_err;
double modified_err;
if (this_err > av_err)
modified_err = av_err * pow((this_err / DOUBLE_DIVIDE_CHECK(av_err)), POW1);
else
modified_err = av_err * pow((this_err / DOUBLE_DIVIDE_CHECK(av_err)), POW2);
return modified_err;
}
static const double weight_table[256] = {
0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000,
0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000,
0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000,
0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000,
0.020000, 0.031250, 0.062500, 0.093750, 0.125000, 0.156250, 0.187500, 0.218750,
0.250000, 0.281250, 0.312500, 0.343750, 0.375000, 0.406250, 0.437500, 0.468750,
0.500000, 0.531250, 0.562500, 0.593750, 0.625000, 0.656250, 0.687500, 0.718750,
0.750000, 0.781250, 0.812500, 0.843750, 0.875000, 0.906250, 0.937500, 0.968750,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000
};
static double simple_weight(YV12_BUFFER_CONFIG *source)
{
int i, j;
unsigned char *src = source->y_buffer;
double sum_weights = 0.0;
/* Loop throught the Y plane raw examining levels and creating a weight
* for the image
*/
i = source->y_height;
do
{
j = source->y_width;
do
{
sum_weights += weight_table[ *src];
src++;
}while(--j);
src -= source->y_width;
src += source->y_stride;
}while(--i);
sum_weights /= (source->y_height * source->y_width);
return sum_weights;
}
/* This function returns the current per frame maximum bitrate target */
static int frame_max_bits(VP8_COMP *cpi)
{
/* Max allocation for a single frame based on the max section guidelines
* passed in and how many bits are left
*/
int max_bits;
/* For CBR we need to also consider buffer fullness.
* If we are running below the optimal level then we need to gradually
* tighten up on max_bits.
*/
if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER)
{
double buffer_fullness_ratio = (double)cpi->buffer_level / DOUBLE_DIVIDE_CHECK((double)cpi->oxcf.optimal_buffer_level);
/* For CBR base this on the target average bits per frame plus the
* maximum sedction rate passed in by the user
*/
max_bits = (int)(cpi->av_per_frame_bandwidth * ((double)cpi->oxcf.two_pass_vbrmax_section / 100.0));
/* If our buffer is below the optimum level */
if (buffer_fullness_ratio < 1.0)
{
/* The lower of max_bits / 4 or cpi->av_per_frame_bandwidth / 4. */
int min_max_bits = ((cpi->av_per_frame_bandwidth >> 2) < (max_bits >> 2)) ? cpi->av_per_frame_bandwidth >> 2 : max_bits >> 2;
max_bits = (int)(max_bits * buffer_fullness_ratio);
/* Lowest value we will set ... which should allow the buffer to
* refill.
*/
if (max_bits < min_max_bits)
max_bits = min_max_bits;
}
}
/* VBR */
else
{
/* For VBR base this on the bits and frames left plus the
* two_pass_vbrmax_section rate passed in by the user
*/
max_bits = (int)(((double)cpi->twopass.bits_left / (cpi->twopass.total_stats.count - (double)cpi->common.current_video_frame)) * ((double)cpi->oxcf.two_pass_vbrmax_section / 100.0));
}
/* Trap case where we are out of bits */
if (max_bits < 0)
max_bits = 0;
return max_bits;
}
void vp8_init_first_pass(VP8_COMP *cpi)
{
zero_stats(&cpi->twopass.total_stats);
}
void vp8_end_first_pass(VP8_COMP *cpi)
{
output_stats(cpi, cpi->output_pkt_list, &cpi->twopass.total_stats);
}
static void zz_motion_search( VP8_COMP *cpi, MACROBLOCK * x,
YV12_BUFFER_CONFIG * raw_buffer,
int * raw_motion_err,
YV12_BUFFER_CONFIG * recon_buffer,
int * best_motion_err, int recon_yoffset)
{
MACROBLOCKD * const xd = & x->e_mbd;
BLOCK *b = &x->block[0];
BLOCKD *d = &x->e_mbd.block[0];
unsigned char *src_ptr = (*(b->base_src) + b->src);
int src_stride = b->src_stride;
unsigned char *raw_ptr;
int raw_stride = raw_buffer->y_stride;
unsigned char *ref_ptr;
int ref_stride = x->e_mbd.pre.y_stride;
(void)cpi;
/* Set up pointers for this macro block raw buffer */
raw_ptr = (unsigned char *)(raw_buffer->y_buffer + recon_yoffset
+ d->offset);
vpx_mse16x16(src_ptr, src_stride, raw_ptr, raw_stride,
(unsigned int *)(raw_motion_err));
/* Set up pointers for this macro block recon buffer */
xd->pre.y_buffer = recon_buffer->y_buffer + recon_yoffset;
ref_ptr = (unsigned char *)(xd->pre.y_buffer + d->offset );
vpx_mse16x16(src_ptr, src_stride, ref_ptr, ref_stride,
(unsigned int *)(best_motion_err));
}
static void first_pass_motion_search(VP8_COMP *cpi, MACROBLOCK *x,
int_mv *ref_mv, MV *best_mv,
YV12_BUFFER_CONFIG *recon_buffer,
int *best_motion_err, int recon_yoffset )
{
MACROBLOCKD *const xd = & x->e_mbd;
BLOCK *b = &x->block[0];
BLOCKD *d = &x->e_mbd.block[0];
int num00;
int_mv tmp_mv;
int_mv ref_mv_full;
int tmp_err;
int step_param = 3; /* Dont search over full range for first pass */
int further_steps = (MAX_MVSEARCH_STEPS - 1) - step_param;
int n;
vp8_variance_fn_ptr_t v_fn_ptr = cpi->fn_ptr[BLOCK_16X16];
int new_mv_mode_penalty = 256;
/* override the default variance function to use MSE */
v_fn_ptr.vf = vpx_mse16x16;
/* Set up pointers for this macro block recon buffer */
xd->pre.y_buffer = recon_buffer->y_buffer + recon_yoffset;
/* Initial step/diamond search centred on best mv */
tmp_mv.as_int = 0;
ref_mv_full.as_mv.col = ref_mv->as_mv.col>>3;
ref_mv_full.as_mv.row = ref_mv->as_mv.row>>3;
tmp_err = cpi->diamond_search_sad(x, b, d, &ref_mv_full, &tmp_mv, step_param,
x->sadperbit16, &num00, &v_fn_ptr,
x->mvcost, ref_mv);
if ( tmp_err < INT_MAX-new_mv_mode_penalty )
tmp_err += new_mv_mode_penalty;
if (tmp_err < *best_motion_err)
{
*best_motion_err = tmp_err;
best_mv->row = tmp_mv.as_mv.row;
best_mv->col = tmp_mv.as_mv.col;
}
/* Further step/diamond searches as necessary */
n = num00;
num00 = 0;
while (n < further_steps)
{
n++;
if (num00)
num00--;
else
{
tmp_err = cpi->diamond_search_sad(x, b, d, &ref_mv_full, &tmp_mv,
step_param + n, x->sadperbit16,
&num00, &v_fn_ptr, x->mvcost,
ref_mv);
if ( tmp_err < INT_MAX-new_mv_mode_penalty )
tmp_err += new_mv_mode_penalty;
if (tmp_err < *best_motion_err)
{
*best_motion_err = tmp_err;
best_mv->row = tmp_mv.as_mv.row;
best_mv->col = tmp_mv.as_mv.col;
}
}
}
}
void vp8_first_pass(VP8_COMP *cpi)
{
int mb_row, mb_col;
MACROBLOCK *const x = & cpi->mb;
VP8_COMMON *const cm = & cpi->common;
MACROBLOCKD *const xd = & x->e_mbd;
int recon_yoffset, recon_uvoffset;
YV12_BUFFER_CONFIG *lst_yv12 = &cm->yv12_fb[cm->lst_fb_idx];
YV12_BUFFER_CONFIG *new_yv12 = &cm->yv12_fb[cm->new_fb_idx];
YV12_BUFFER_CONFIG *gld_yv12 = &cm->yv12_fb[cm->gld_fb_idx];
int recon_y_stride = lst_yv12->y_stride;
int recon_uv_stride = lst_yv12->uv_stride;
int64_t intra_error = 0;
int64_t coded_error = 0;
int sum_mvr = 0, sum_mvc = 0;
int sum_mvr_abs = 0, sum_mvc_abs = 0;
int sum_mvrs = 0, sum_mvcs = 0;
int mvcount = 0;
int intercount = 0;
int second_ref_count = 0;
int intrapenalty = 256;
int neutral_count = 0;
int new_mv_count = 0;
int sum_in_vectors = 0;
uint32_t lastmv_as_int = 0;
int_mv zero_ref_mv;
zero_ref_mv.as_int = 0;
vp8_clear_system_state();
x->src = * cpi->Source;
xd->pre = *lst_yv12;
xd->dst = *new_yv12;
x->partition_info = x->pi;
xd->mode_info_context = cm->mi;
if(!cm->use_bilinear_mc_filter)
{
xd->subpixel_predict = vp8_sixtap_predict4x4;
xd->subpixel_predict8x4 = vp8_sixtap_predict8x4;
xd->subpixel_predict8x8 = vp8_sixtap_predict8x8;
xd->subpixel_predict16x16 = vp8_sixtap_predict16x16;
}
else
{
xd->subpixel_predict = vp8_bilinear_predict4x4;
xd->subpixel_predict8x4 = vp8_bilinear_predict8x4;
xd->subpixel_predict8x8 = vp8_bilinear_predict8x8;
xd->subpixel_predict16x16 = vp8_bilinear_predict16x16;
}
vp8_build_block_offsets(x);
/* set up frame new frame for intra coded blocks */
vp8_setup_intra_recon(new_yv12);
vp8cx_frame_init_quantizer(cpi);
/* Initialise the MV cost table to the defaults */
{
int flag[2] = {1, 1};
vp8_initialize_rd_consts(cpi, x, vp8_dc_quant(cm->base_qindex, cm->y1dc_delta_q));
memcpy(cm->fc.mvc, vp8_default_mv_context, sizeof(vp8_default_mv_context));
vp8_build_component_cost_table(cpi->mb.mvcost, (const MV_CONTEXT *) cm->fc.mvc, flag);
}
/* for each macroblock row in image */
for (mb_row = 0; mb_row < cm->mb_rows; mb_row++)
{
int_mv best_ref_mv;
best_ref_mv.as_int = 0;
/* reset above block coeffs */
xd->up_available = (mb_row != 0);
recon_yoffset = (mb_row * recon_y_stride * 16);
recon_uvoffset = (mb_row * recon_uv_stride * 8);
/* Set up limit values for motion vectors to prevent them extending
* outside the UMV borders
*/
x->mv_row_min = -((mb_row * 16) + (VP8BORDERINPIXELS - 16));
x->mv_row_max = ((cm->mb_rows - 1 - mb_row) * 16) + (VP8BORDERINPIXELS - 16);
/* for each macroblock col in image */
for (mb_col = 0; mb_col < cm->mb_cols; mb_col++)
{
int this_error;
int gf_motion_error = INT_MAX;
int use_dc_pred = (mb_col || mb_row) && (!mb_col || !mb_row);
xd->dst.y_buffer = new_yv12->y_buffer + recon_yoffset;
xd->dst.u_buffer = new_yv12->u_buffer + recon_uvoffset;
xd->dst.v_buffer = new_yv12->v_buffer + recon_uvoffset;
xd->left_available = (mb_col != 0);
/* Copy current mb to a buffer */
vp8_copy_mem16x16(x->src.y_buffer, x->src.y_stride, x->thismb, 16);
/* do intra 16x16 prediction */
this_error = vp8_encode_intra(cpi, x, use_dc_pred);
/* "intrapenalty" below deals with situations where the intra
* and inter error scores are very low (eg a plain black frame)
* We do not have special cases in first pass for 0,0 and
* nearest etc so all inter modes carry an overhead cost
* estimate fot the mv. When the error score is very low this
* causes us to pick all or lots of INTRA modes and throw lots
* of key frames. This penalty adds a cost matching that of a
* 0,0 mv to the intra case.
*/
this_error += intrapenalty;
/* Cumulative intra error total */
intra_error += (int64_t)this_error;
/* Set up limit values for motion vectors to prevent them
* extending outside the UMV borders
*/
x->mv_col_min = -((mb_col * 16) + (VP8BORDERINPIXELS - 16));
x->mv_col_max = ((cm->mb_cols - 1 - mb_col) * 16) + (VP8BORDERINPIXELS - 16);
/* Other than for the first frame do a motion search */
if (cm->current_video_frame > 0)
{
BLOCKD *d = &x->e_mbd.block[0];
MV tmp_mv = {0, 0};
int tmp_err;
int motion_error = INT_MAX;
int raw_motion_error = INT_MAX;
/* Simple 0,0 motion with no mv overhead */
zz_motion_search( cpi, x, cpi->last_frame_unscaled_source,
&raw_motion_error, lst_yv12, &motion_error,
recon_yoffset );
d->bmi.mv.as_mv.row = 0;
d->bmi.mv.as_mv.col = 0;
if (raw_motion_error < cpi->oxcf.encode_breakout)
goto skip_motion_search;
/* Test last reference frame using the previous best mv as the
* starting point (best reference) for the search
*/
first_pass_motion_search(cpi, x, &best_ref_mv,
&d->bmi.mv.as_mv, lst_yv12,
&motion_error, recon_yoffset);
/* If the current best reference mv is not centred on 0,0
* then do a 0,0 based search as well
*/
if (best_ref_mv.as_int)
{
tmp_err = INT_MAX;
first_pass_motion_search(cpi, x, &zero_ref_mv, &tmp_mv,
lst_yv12, &tmp_err, recon_yoffset);
if ( tmp_err < motion_error )
{
motion_error = tmp_err;
d->bmi.mv.as_mv.row = tmp_mv.row;
d->bmi.mv.as_mv.col = tmp_mv.col;
}
}
/* Experimental search in a second reference frame ((0,0)
* based only)
*/
if (cm->current_video_frame > 1)
{
first_pass_motion_search(cpi, x, &zero_ref_mv, &tmp_mv, gld_yv12, &gf_motion_error, recon_yoffset);
if ((gf_motion_error < motion_error) && (gf_motion_error < this_error))
{
second_ref_count++;
}
/* Reset to last frame as reference buffer */
xd->pre.y_buffer = lst_yv12->y_buffer + recon_yoffset;
xd->pre.u_buffer = lst_yv12->u_buffer + recon_uvoffset;
xd->pre.v_buffer = lst_yv12->v_buffer + recon_uvoffset;
}
skip_motion_search:
/* Intra assumed best */
best_ref_mv.as_int = 0;
if (motion_error <= this_error)
{
/* Keep a count of cases where the inter and intra were
* very close and very low. This helps with scene cut
* detection for example in cropped clips with black bars
* at the sides or top and bottom.
*/
if( (((this_error-intrapenalty) * 9) <=
(motion_error*10)) &&
(this_error < (2*intrapenalty)) )
{
neutral_count++;
}
d->bmi.mv.as_mv.row *= 8;
d->bmi.mv.as_mv.col *= 8;
this_error = motion_error;
vp8_set_mbmode_and_mvs(x, NEWMV, &d->bmi.mv);
vp8_encode_inter16x16y(x);
sum_mvr += d->bmi.mv.as_mv.row;
sum_mvr_abs += abs(d->bmi.mv.as_mv.row);
sum_mvc += d->bmi.mv.as_mv.col;
sum_mvc_abs += abs(d->bmi.mv.as_mv.col);
sum_mvrs += d->bmi.mv.as_mv.row * d->bmi.mv.as_mv.row;
sum_mvcs += d->bmi.mv.as_mv.col * d->bmi.mv.as_mv.col;
intercount++;
best_ref_mv.as_int = d->bmi.mv.as_int;
/* Was the vector non-zero */
if (d->bmi.mv.as_int)
{
mvcount++;
/* Was it different from the last non zero vector */
if ( d->bmi.mv.as_int != lastmv_as_int )
new_mv_count++;
lastmv_as_int = d->bmi.mv.as_int;
/* Does the Row vector point inwards or outwards */
if (mb_row < cm->mb_rows / 2)
{
if (d->bmi.mv.as_mv.row > 0)
sum_in_vectors--;
else if (d->bmi.mv.as_mv.row < 0)
sum_in_vectors++;
}
else if (mb_row > cm->mb_rows / 2)
{
if (d->bmi.mv.as_mv.row > 0)
sum_in_vectors++;
else if (d->bmi.mv.as_mv.row < 0)
sum_in_vectors--;
}
/* Does the Row vector point inwards or outwards */
if (mb_col < cm->mb_cols / 2)
{
if (d->bmi.mv.as_mv.col > 0)
sum_in_vectors--;
else if (d->bmi.mv.as_mv.col < 0)
sum_in_vectors++;
}
else if (mb_col > cm->mb_cols / 2)
{
if (d->bmi.mv.as_mv.col > 0)
sum_in_vectors++;
else if (d->bmi.mv.as_mv.col < 0)
sum_in_vectors--;
}
}
}
}
coded_error += (int64_t)this_error;
/* adjust to the next column of macroblocks */
x->src.y_buffer += 16;
x->src.u_buffer += 8;
x->src.v_buffer += 8;
recon_yoffset += 16;
recon_uvoffset += 8;
}
/* adjust to the next row of mbs */
x->src.y_buffer += 16 * x->src.y_stride - 16 * cm->mb_cols;
x->src.u_buffer += 8 * x->src.uv_stride - 8 * cm->mb_cols;
x->src.v_buffer += 8 * x->src.uv_stride - 8 * cm->mb_cols;
/* extend the recon for intra prediction */
vp8_extend_mb_row(new_yv12, xd->dst.y_buffer + 16, xd->dst.u_buffer + 8, xd->dst.v_buffer + 8);
vp8_clear_system_state();
}
vp8_clear_system_state();
{
double weight = 0.0;
FIRSTPASS_STATS fps;
fps.frame = cm->current_video_frame ;
fps.intra_error = (double)(intra_error >> 8);
fps.coded_error = (double)(coded_error >> 8);
weight = simple_weight(cpi->Source);
if (weight < 0.1)
weight = 0.1;
fps.ssim_weighted_pred_err = fps.coded_error * weight;
fps.pcnt_inter = 0.0;
fps.pcnt_motion = 0.0;
fps.MVr = 0.0;
fps.mvr_abs = 0.0;
fps.MVc = 0.0;
fps.mvc_abs = 0.0;
fps.MVrv = 0.0;
fps.MVcv = 0.0;
fps.mv_in_out_count = 0.0;
fps.new_mv_count = 0.0;
fps.count = 1.0;
fps.pcnt_inter = 1.0 * (double)intercount / cm->MBs;
fps.pcnt_second_ref = 1.0 * (double)second_ref_count / cm->MBs;
fps.pcnt_neutral = 1.0 * (double)neutral_count / cm->MBs;
if (mvcount > 0)
{
fps.MVr = (double)sum_mvr / (double)mvcount;
fps.mvr_abs = (double)sum_mvr_abs / (double)mvcount;
fps.MVc = (double)sum_mvc / (double)mvcount;
fps.mvc_abs = (double)sum_mvc_abs / (double)mvcount;
fps.MVrv = ((double)sum_mvrs - (fps.MVr * fps.MVr / (double)mvcount)) / (double)mvcount;
fps.MVcv = ((double)sum_mvcs - (fps.MVc * fps.MVc / (double)mvcount)) / (double)mvcount;
fps.mv_in_out_count = (double)sum_in_vectors / (double)(mvcount * 2);
fps.new_mv_count = new_mv_count;
fps.pcnt_motion = 1.0 * (double)mvcount / cpi->common.MBs;
}
/* TODO: handle the case when duration is set to 0, or something less
* than the full time between subsequent cpi->source_time_stamps
*/
fps.duration = (double)(cpi->source->ts_end
- cpi->source->ts_start);
/* don't want to do output stats with a stack variable! */
memcpy(&cpi->twopass.this_frame_stats,
&fps,
sizeof(FIRSTPASS_STATS));
output_stats(cpi, cpi->output_pkt_list, &cpi->twopass.this_frame_stats);
accumulate_stats(&cpi->twopass.total_stats, &fps);
}
/* Copy the previous Last Frame into the GF buffer if specific
* conditions for doing so are met
*/
if ((cm->current_video_frame > 0) &&
(cpi->twopass.this_frame_stats.pcnt_inter > 0.20) &&
((cpi->twopass.this_frame_stats.intra_error /
DOUBLE_DIVIDE_CHECK(cpi->twopass.this_frame_stats.coded_error)) >
2.0))
{
vp8_yv12_copy_frame(lst_yv12, gld_yv12);
}
/* swap frame pointers so last frame refers to the frame we just
* compressed
*/
vp8_swap_yv12_buffer(lst_yv12, new_yv12);
vp8_yv12_extend_frame_borders(lst_yv12);
/* Special case for the first frame. Copy into the GF buffer as a
* second reference.
*/
if (cm->current_video_frame == 0)
{
vp8_yv12_copy_frame(lst_yv12, gld_yv12);
}
/* use this to see what the first pass reconstruction looks like */
if (0)
{
char filename[512];
FILE *recon_file;
sprintf(filename, "enc%04d.yuv", (int) cm->current_video_frame);
if (cm->current_video_frame == 0)
recon_file = fopen(filename, "wb");
else
recon_file = fopen(filename, "ab");
(void) fwrite(lst_yv12->buffer_alloc, lst_yv12->frame_size, 1,
recon_file);
fclose(recon_file);
}
cm->current_video_frame++;
}
extern const int vp8_bits_per_mb[2][QINDEX_RANGE];
/* Estimate a cost per mb attributable to overheads such as the coding of
* modes and motion vectors.
* Currently simplistic in its assumptions for testing.
*/
static double bitcost( double prob )
{
if (prob > 0.000122)
return -log(prob) / log(2.0);
else
return 13.0;
}
static int64_t estimate_modemvcost(VP8_COMP *cpi,
FIRSTPASS_STATS * fpstats)
{
int mv_cost;
int64_t mode_cost;
double av_pct_inter = fpstats->pcnt_inter / fpstats->count;
double av_pct_motion = fpstats->pcnt_motion / fpstats->count;
double av_intra = (1.0 - av_pct_inter);
double zz_cost;
double motion_cost;
double intra_cost;
zz_cost = bitcost(av_pct_inter - av_pct_motion);
motion_cost = bitcost(av_pct_motion);
intra_cost = bitcost(av_intra);
/* Estimate of extra bits per mv overhead for mbs
* << 9 is the normalization to the (bits * 512) used in vp8_bits_per_mb
*/
mv_cost = ((int)(fpstats->new_mv_count / fpstats->count) * 8) << 9;
/* Crude estimate of overhead cost from modes
* << 9 is the normalization to (bits * 512) used in vp8_bits_per_mb
*/
mode_cost = (int64_t)((((av_pct_inter - av_pct_motion) * zz_cost) +
(av_pct_motion * motion_cost) +
(av_intra * intra_cost)) * cpi->common.MBs) * 512;
return mv_cost + mode_cost;
}
static double calc_correction_factor( double err_per_mb,
double err_devisor,
double pt_low,
double pt_high,
int Q )
{
double power_term;
double error_term = err_per_mb / err_devisor;
double correction_factor;
/* Adjustment based on Q to power term. */
power_term = pt_low + (Q * 0.01);
power_term = (power_term > pt_high) ? pt_high : power_term;
/* Adjustments to error term */
/* TBD */
/* Calculate correction factor */
correction_factor = pow(error_term, power_term);
/* Clip range */
correction_factor =
(correction_factor < 0.05)
? 0.05 : (correction_factor > 5.0) ? 5.0 : correction_factor;
return correction_factor;
}
static int estimate_max_q(VP8_COMP *cpi,
FIRSTPASS_STATS * fpstats,
int section_target_bandwitdh,
int overhead_bits )
{
int Q;
int num_mbs = cpi->common.MBs;
int target_norm_bits_per_mb;
double section_err = (fpstats->coded_error / fpstats->count);
double err_per_mb = section_err / num_mbs;
double err_correction_factor;
double speed_correction = 1.0;
int overhead_bits_per_mb;
if (section_target_bandwitdh <= 0)
return cpi->twopass.maxq_max_limit; /* Highest value allowed */
target_norm_bits_per_mb =
(section_target_bandwitdh < (1 << 20))
? (512 * section_target_bandwitdh) / num_mbs
: 512 * (section_target_bandwitdh / num_mbs);
/* Calculate a corrective factor based on a rolling ratio of bits spent
* vs target bits
*/
if ((cpi->rolling_target_bits > 0) &&
(cpi->active_worst_quality < cpi->worst_quality))
{
double rolling_ratio;
rolling_ratio = (double)cpi->rolling_actual_bits /
(double)cpi->rolling_target_bits;
if (rolling_ratio < 0.95)
cpi->twopass.est_max_qcorrection_factor -= 0.005;
else if (rolling_ratio > 1.05)
cpi->twopass.est_max_qcorrection_factor += 0.005;
cpi->twopass.est_max_qcorrection_factor =
(cpi->twopass.est_max_qcorrection_factor < 0.1)
? 0.1
: (cpi->twopass.est_max_qcorrection_factor > 10.0)
? 10.0 : cpi->twopass.est_max_qcorrection_factor;
}
/* Corrections for higher compression speed settings
* (reduced compression expected)
*/
if ((cpi->compressor_speed == 3) || (cpi->compressor_speed == 1))
{
if (cpi->oxcf.cpu_used <= 5)
speed_correction = 1.04 + (cpi->oxcf.cpu_used * 0.04);
else
speed_correction = 1.25;
}
/* Estimate of overhead bits per mb */
/* Correction to overhead bits for min allowed Q. */
overhead_bits_per_mb = overhead_bits / num_mbs;
overhead_bits_per_mb = (int)(overhead_bits_per_mb *
pow( 0.98, (double)cpi->twopass.maxq_min_limit ));
/* Try and pick a max Q that will be high enough to encode the
* content at the given rate.
*/
for (Q = cpi->twopass.maxq_min_limit; Q < cpi->twopass.maxq_max_limit; Q++)
{
int bits_per_mb_at_this_q;
/* Error per MB based correction factor */
err_correction_factor =
calc_correction_factor(err_per_mb, 150.0, 0.40, 0.90, Q);
bits_per_mb_at_this_q =
vp8_bits_per_mb[INTER_FRAME][Q] + overhead_bits_per_mb;
bits_per_mb_at_this_q = (int)(.5 + err_correction_factor
* speed_correction * cpi->twopass.est_max_qcorrection_factor
* cpi->twopass.section_max_qfactor
* (double)bits_per_mb_at_this_q);
/* Mode and motion overhead */
/* As Q rises in real encode loop rd code will force overhead down
* We make a crude adjustment for this here as *.98 per Q step.
*/
overhead_bits_per_mb = (int)((double)overhead_bits_per_mb * 0.98);
if (bits_per_mb_at_this_q <= target_norm_bits_per_mb)
break;
}
/* Restriction on active max q for constrained quality mode. */
if ( (cpi->oxcf.end_usage == USAGE_CONSTRAINED_QUALITY) &&
(Q < cpi->cq_target_quality) )
{
Q = cpi->cq_target_quality;
}
/* Adjust maxq_min_limit and maxq_max_limit limits based on
* average q observed in clip for non kf/gf.arf frames
* Give average a chance to settle though.
*/
if ( (cpi->ni_frames >
((int)cpi->twopass.total_stats.count >> 8)) &&
(cpi->ni_frames > 150) )
{
cpi->twopass.maxq_max_limit = ((cpi->ni_av_qi + 32) < cpi->worst_quality)
? (cpi->ni_av_qi + 32) : cpi->worst_quality;
cpi->twopass.maxq_min_limit = ((cpi->ni_av_qi - 32) > cpi->best_quality)
? (cpi->ni_av_qi - 32) : cpi->best_quality;
}
return Q;
}
/* For cq mode estimate a cq level that matches the observed
* complexity and data rate.
*/
static int estimate_cq( VP8_COMP *cpi,
FIRSTPASS_STATS * fpstats,
int section_target_bandwitdh,
int overhead_bits )
{
int Q;
int num_mbs = cpi->common.MBs;
int target_norm_bits_per_mb;
double section_err = (fpstats->coded_error / fpstats->count);
double err_per_mb = section_err / num_mbs;
double err_correction_factor;
double speed_correction = 1.0;
double clip_iiratio;
double clip_iifactor;
int overhead_bits_per_mb;
if (0)
{
FILE *f = fopen("epmp.stt", "a");
fprintf(f, "%10.2f\n", err_per_mb );
fclose(f);
}
target_norm_bits_per_mb = (section_target_bandwitdh < (1 << 20))
? (512 * section_target_bandwitdh) / num_mbs
: 512 * (section_target_bandwitdh / num_mbs);
/* Estimate of overhead bits per mb */
overhead_bits_per_mb = overhead_bits / num_mbs;
/* Corrections for higher compression speed settings
* (reduced compression expected)
*/
if ((cpi->compressor_speed == 3) || (cpi->compressor_speed == 1))
{
if (cpi->oxcf.cpu_used <= 5)
speed_correction = 1.04 + (cpi->oxcf.cpu_used * 0.04);
else
speed_correction = 1.25;
}
/* II ratio correction factor for clip as a whole */
clip_iiratio = cpi->twopass.total_stats.intra_error /
DOUBLE_DIVIDE_CHECK(cpi->twopass.total_stats.coded_error);
clip_iifactor = 1.0 - ((clip_iiratio - 10.0) * 0.025);
if (clip_iifactor < 0.80)
clip_iifactor = 0.80;
/* Try and pick a Q that can encode the content at the given rate. */
for (Q = 0; Q < MAXQ; Q++)
{
int bits_per_mb_at_this_q;
/* Error per MB based correction factor */
err_correction_factor =
calc_correction_factor(err_per_mb, 100.0, 0.40, 0.90, Q);
bits_per_mb_at_this_q =
vp8_bits_per_mb[INTER_FRAME][Q] + overhead_bits_per_mb;
bits_per_mb_at_this_q =
(int)( .5 + err_correction_factor *
speed_correction *
clip_iifactor *
(double)bits_per_mb_at_this_q);
/* Mode and motion overhead */
/* As Q rises in real encode loop rd code will force overhead down
* We make a crude adjustment for this here as *.98 per Q step.
*/
overhead_bits_per_mb = (int)((double)overhead_bits_per_mb * 0.98);
if (bits_per_mb_at_this_q <= target_norm_bits_per_mb)
break;
}
/* Clip value to range "best allowed to (worst allowed - 1)" */
Q = cq_level[Q];
if ( Q >= cpi->worst_quality )
Q = cpi->worst_quality - 1;
if ( Q < cpi->best_quality )
Q = cpi->best_quality;
return Q;
}
static int estimate_q(VP8_COMP *cpi, double section_err, int section_target_bandwitdh)
{
int Q;
int num_mbs = cpi->common.MBs;
int target_norm_bits_per_mb;
double err_per_mb = section_err / num_mbs;
double err_correction_factor;
double speed_correction = 1.0;
target_norm_bits_per_mb = (section_target_bandwitdh < (1 << 20)) ? (512 * section_target_bandwitdh) / num_mbs : 512 * (section_target_bandwitdh / num_mbs);
/* Corrections for higher compression speed settings
* (reduced compression expected)
*/
if ((cpi->compressor_speed == 3) || (cpi->compressor_speed == 1))
{
if (cpi->oxcf.cpu_used <= 5)
speed_correction = 1.04 + (cpi->oxcf.cpu_used * 0.04);
else
speed_correction = 1.25;
}
/* Try and pick a Q that can encode the content at the given rate. */
for (Q = 0; Q < MAXQ; Q++)
{
int bits_per_mb_at_this_q;
/* Error per MB based correction factor */
err_correction_factor =
calc_correction_factor(err_per_mb, 150.0, 0.40, 0.90, Q);
bits_per_mb_at_this_q =
(int)( .5 + ( err_correction_factor *
speed_correction *
cpi->twopass.est_max_qcorrection_factor *
(double)vp8_bits_per_mb[INTER_FRAME][Q] / 1.0 ) );
if (bits_per_mb_at_this_q <= target_norm_bits_per_mb)
break;
}
return Q;
}
/* Estimate a worst case Q for a KF group */
static int estimate_kf_group_q(VP8_COMP *cpi, double section_err, int section_target_bandwitdh, double group_iiratio)
{
int Q;
int num_mbs = cpi->common.MBs;
int target_norm_bits_per_mb = (512 * section_target_bandwitdh) / num_mbs;
int bits_per_mb_at_this_q;
double err_per_mb = section_err / num_mbs;
double err_correction_factor;
double speed_correction = 1.0;
double current_spend_ratio = 1.0;
double pow_highq = (POW1 < 0.6) ? POW1 + 0.3 : 0.90;
double pow_lowq = (POW1 < 0.7) ? POW1 + 0.1 : 0.80;
double iiratio_correction_factor = 1.0;
double combined_correction_factor;
/* Trap special case where the target is <= 0 */
if (target_norm_bits_per_mb <= 0)
return MAXQ * 2;
/* Calculate a corrective factor based on a rolling ratio of bits spent
* vs target bits
* This is clamped to the range 0.1 to 10.0
*/
if (cpi->long_rolling_target_bits <= 0)
current_spend_ratio = 10.0;
else
{
current_spend_ratio = (double)cpi->long_rolling_actual_bits / (double)cpi->long_rolling_target_bits;
current_spend_ratio = (current_spend_ratio > 10.0) ? 10.0 : (current_spend_ratio < 0.1) ? 0.1 : current_spend_ratio;
}
/* Calculate a correction factor based on the quality of prediction in
* the sequence as indicated by intra_inter error score ratio (IIRatio)
* The idea here is to favour subsampling in the hardest sections vs
* the easyest.
*/
iiratio_correction_factor = 1.0 - ((group_iiratio - 6.0) * 0.1);
if (iiratio_correction_factor < 0.5)
iiratio_correction_factor = 0.5;
/* Corrections for higher compression speed settings
* (reduced compression expected)
*/
if ((cpi->compressor_speed == 3) || (cpi->compressor_speed == 1))
{
if (cpi->oxcf.cpu_used <= 5)
speed_correction = 1.04 + (cpi->oxcf.cpu_used * 0.04);
else
speed_correction = 1.25;
}
/* Combine the various factors calculated above */
combined_correction_factor = speed_correction * iiratio_correction_factor * current_spend_ratio;
/* Try and pick a Q that should be high enough to encode the content at
* the given rate.
*/
for (Q = 0; Q < MAXQ; Q++)
{
/* Error per MB based correction factor */
err_correction_factor =
calc_correction_factor(err_per_mb, 150.0, pow_lowq, pow_highq, Q);
bits_per_mb_at_this_q =
(int)(.5 + ( err_correction_factor *
combined_correction_factor *
(double)vp8_bits_per_mb[INTER_FRAME][Q]) );
if (bits_per_mb_at_this_q <= target_norm_bits_per_mb)
break;
}
/* If we could not hit the target even at Max Q then estimate what Q
* would have been required
*/
while ((bits_per_mb_at_this_q > target_norm_bits_per_mb) && (Q < (MAXQ * 2)))
{
bits_per_mb_at_this_q = (int)(0.96 * bits_per_mb_at_this_q);
Q++;
}
if (0)
{
FILE *f = fopen("estkf_q.stt", "a");
fprintf(f, "%8d %8d %8d %8.2f %8.3f %8.2f %8.3f %8.3f %8.3f %8d\n", cpi->common.current_video_frame, bits_per_mb_at_this_q,
target_norm_bits_per_mb, err_per_mb, err_correction_factor,
current_spend_ratio, group_iiratio, iiratio_correction_factor,
(double)cpi->buffer_level / (double)cpi->oxcf.optimal_buffer_level, Q);
fclose(f);
}
return Q;
}
void vp8_init_second_pass(VP8_COMP *cpi)
{
FIRSTPASS_STATS this_frame;
FIRSTPASS_STATS *start_pos;
double two_pass_min_rate = (double)(cpi->oxcf.target_bandwidth * cpi->oxcf.two_pass_vbrmin_section / 100);
zero_stats(&cpi->twopass.total_stats);
zero_stats(&cpi->twopass.total_left_stats);
if (!cpi->twopass.stats_in_end)
return;
cpi->twopass.total_stats = *cpi->twopass.stats_in_end;
cpi->twopass.total_left_stats = cpi->twopass.total_stats;
/* each frame can have a different duration, as the frame rate in the
* source isn't guaranteed to be constant. The frame rate prior to
* the first frame encoded in the second pass is a guess. However the
* sum duration is not. Its calculated based on the actual durations of
* all frames from the first pass.
*/
vp8_new_framerate(cpi, 10000000.0 * cpi->twopass.total_stats.count / cpi->twopass.total_stats.duration);
cpi->output_framerate = cpi->framerate;
cpi->twopass.bits_left = (int64_t)(cpi->twopass.total_stats.duration * cpi->oxcf.target_bandwidth / 10000000.0) ;
cpi->twopass.bits_left -= (int64_t)(cpi->twopass.total_stats.duration * two_pass_min_rate / 10000000.0);
/* Calculate a minimum intra value to be used in determining the IIratio
* scores used in the second pass. We have this minimum to make sure
* that clips that are static but "low complexity" in the intra domain
* are still boosted appropriately for KF/GF/ARF
*/
cpi->twopass.kf_intra_err_min = KF_MB_INTRA_MIN * cpi->common.MBs;
cpi->twopass.gf_intra_err_min = GF_MB_INTRA_MIN * cpi->common.MBs;
/* Scan the first pass file and calculate an average Intra / Inter error
* score ratio for the sequence
*/
{
double sum_iiratio = 0.0;
double IIRatio;
start_pos = cpi->twopass.stats_in; /* Note starting "file" position */
while (input_stats(cpi, &this_frame) != EOF)
{
IIRatio = this_frame.intra_error / DOUBLE_DIVIDE_CHECK(this_frame.coded_error);
IIRatio = (IIRatio < 1.0) ? 1.0 : (IIRatio > 20.0) ? 20.0 : IIRatio;
sum_iiratio += IIRatio;
}
cpi->twopass.avg_iiratio = sum_iiratio / DOUBLE_DIVIDE_CHECK((double)cpi->twopass.total_stats.count);
/* Reset file position */
reset_fpf_position(cpi, start_pos);
}
/* Scan the first pass file and calculate a modified total error based
* upon the bias/power function used to allocate bits
*/
{
start_pos = cpi->twopass.stats_in; /* Note starting "file" position */
cpi->twopass.modified_error_total = 0.0;
cpi->twopass.modified_error_used = 0.0;
while (input_stats(cpi, &this_frame) != EOF)
{
cpi->twopass.modified_error_total += calculate_modified_err(cpi, &this_frame);
}
cpi->twopass.modified_error_left = cpi->twopass.modified_error_total;
reset_fpf_position(cpi, start_pos); /* Reset file position */
}
}
void vp8_end_second_pass(VP8_COMP *cpi)
{
(void)cpi;
}
/* This function gives and estimate of how badly we believe the prediction
* quality is decaying from frame to frame.
*/
static double get_prediction_decay_rate(VP8_COMP *cpi, FIRSTPASS_STATS *next_frame)
{
double prediction_decay_rate;
double motion_decay;
double motion_pct = next_frame->pcnt_motion;
(void)cpi;
/* Initial basis is the % mbs inter coded */
prediction_decay_rate = next_frame->pcnt_inter;
/* High % motion -> somewhat higher decay rate */
motion_decay = (1.0 - (motion_pct / 20.0));
if (motion_decay < prediction_decay_rate)
prediction_decay_rate = motion_decay;
/* Adjustment to decay rate based on speed of motion */
{
double this_mv_rabs;
double this_mv_cabs;
double distance_factor;
this_mv_rabs = fabs(next_frame->mvr_abs * motion_pct);
this_mv_cabs = fabs(next_frame->mvc_abs * motion_pct);
distance_factor = sqrt((this_mv_rabs * this_mv_rabs) +
(this_mv_cabs * this_mv_cabs)) / 250.0;
distance_factor = ((distance_factor > 1.0)
? 0.0 : (1.0 - distance_factor));
if (distance_factor < prediction_decay_rate)
prediction_decay_rate = distance_factor;
}
return prediction_decay_rate;
}
/* Function to test for a condition where a complex transition is followed
* by a static section. For example in slide shows where there is a fade
* between slides. This is to help with more optimal kf and gf positioning.
*/
static int detect_transition_to_still(
VP8_COMP *cpi,
int frame_interval,
int still_interval,
double loop_decay_rate,
double decay_accumulator )
{
int trans_to_still = 0;
/* Break clause to detect very still sections after motion
* For example a static image after a fade or other transition
* instead of a clean scene cut.
*/
if ( (frame_interval > MIN_GF_INTERVAL) &&
(loop_decay_rate >= 0.999) &&
(decay_accumulator < 0.9) )
{
int j;
FIRSTPASS_STATS * position = cpi->twopass.stats_in;
FIRSTPASS_STATS tmp_next_frame;
double decay_rate;
/* Look ahead a few frames to see if static condition persists... */
for ( j = 0; j < still_interval; j++ )
{
if (EOF == input_stats(cpi, &tmp_next_frame))
break;
decay_rate = get_prediction_decay_rate(cpi, &tmp_next_frame);
if ( decay_rate < 0.999 )
break;
}
/* Reset file position */
reset_fpf_position(cpi, position);
/* Only if it does do we signal a transition to still */
if ( j == still_interval )
trans_to_still = 1;
}
return trans_to_still;
}
/* This function detects a flash through the high relative pcnt_second_ref
* score in the frame following a flash frame. The offset passed in should
* reflect this
*/
static int detect_flash( VP8_COMP *cpi, int offset )
{
FIRSTPASS_STATS next_frame;
int flash_detected = 0;
/* Read the frame data. */
/* The return is 0 (no flash detected) if not a valid frame */
if ( read_frame_stats(cpi, &next_frame, offset) != EOF )
{
/* What we are looking for here is a situation where there is a
* brief break in prediction (such as a flash) but subsequent frames
* are reasonably well predicted by an earlier (pre flash) frame.
* The recovery after a flash is indicated by a high pcnt_second_ref
* comapred to pcnt_inter.
*/
if ( (next_frame.pcnt_second_ref > next_frame.pcnt_inter) &&
(next_frame.pcnt_second_ref >= 0.5 ) )
{
flash_detected = 1;
/*if (1)
{
FILE *f = fopen("flash.stt", "a");
fprintf(f, "%8.0f %6.2f %6.2f\n",
next_frame.frame,
next_frame.pcnt_inter,
next_frame.pcnt_second_ref);
fclose(f);
}*/
}
}
return flash_detected;
}
/* Update the motion related elements to the GF arf boost calculation */
static void accumulate_frame_motion_stats(
VP8_COMP *cpi,
FIRSTPASS_STATS * this_frame,
double * this_frame_mv_in_out,
double * mv_in_out_accumulator,
double * abs_mv_in_out_accumulator,
double * mv_ratio_accumulator )
{
double this_frame_mvr_ratio;
double this_frame_mvc_ratio;
double motion_pct;
(void)cpi;
/* Accumulate motion stats. */
motion_pct = this_frame->pcnt_motion;
/* Accumulate Motion In/Out of frame stats */
*this_frame_mv_in_out = this_frame->mv_in_out_count * motion_pct;
*mv_in_out_accumulator += this_frame->mv_in_out_count * motion_pct;
*abs_mv_in_out_accumulator +=
fabs(this_frame->mv_in_out_count * motion_pct);
/* Accumulate a measure of how uniform (or conversely how random)
* the motion field is. (A ratio of absmv / mv)
*/
if (motion_pct > 0.05)
{
this_frame_mvr_ratio = fabs(this_frame->mvr_abs) /
DOUBLE_DIVIDE_CHECK(fabs(this_frame->MVr));
this_frame_mvc_ratio = fabs(this_frame->mvc_abs) /
DOUBLE_DIVIDE_CHECK(fabs(this_frame->MVc));
*mv_ratio_accumulator +=
(this_frame_mvr_ratio < this_frame->mvr_abs)
? (this_frame_mvr_ratio * motion_pct)
: this_frame->mvr_abs * motion_pct;
*mv_ratio_accumulator +=
(this_frame_mvc_ratio < this_frame->mvc_abs)
? (this_frame_mvc_ratio * motion_pct)
: this_frame->mvc_abs * motion_pct;
}
}
/* Calculate a baseline boost number for the current frame. */
static double calc_frame_boost(
VP8_COMP *cpi,
FIRSTPASS_STATS * this_frame,
double this_frame_mv_in_out )
{
double frame_boost;
/* Underlying boost factor is based on inter intra error ratio */
if (this_frame->intra_error > cpi->twopass.gf_intra_err_min)
frame_boost = (IIFACTOR * this_frame->intra_error /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error));
else
frame_boost = (IIFACTOR * cpi->twopass.gf_intra_err_min /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error));
/* Increase boost for frames where new data coming into frame
* (eg zoom out). Slightly reduce boost if there is a net balance
* of motion out of the frame (zoom in).
* The range for this_frame_mv_in_out is -1.0 to +1.0
*/
if (this_frame_mv_in_out > 0.0)
frame_boost += frame_boost * (this_frame_mv_in_out * 2.0);
/* In extreme case boost is halved */
else
frame_boost += frame_boost * (this_frame_mv_in_out / 2.0);
/* Clip to maximum */
if (frame_boost > GF_RMAX)
frame_boost = GF_RMAX;
return frame_boost;
}
#if NEW_BOOST
static int calc_arf_boost(
VP8_COMP *cpi,
int offset,
int f_frames,
int b_frames,
int *f_boost,
int *b_boost )
{
FIRSTPASS_STATS this_frame;
int i;
double boost_score = 0.0;
double mv_ratio_accumulator = 0.0;
double decay_accumulator = 1.0;
double this_frame_mv_in_out = 0.0;
double mv_in_out_accumulator = 0.0;
double abs_mv_in_out_accumulator = 0.0;
double r;
int flash_detected = 0;
/* Search forward from the proposed arf/next gf position */
for ( i = 0; i < f_frames; i++ )
{
if ( read_frame_stats(cpi, &this_frame, (i+offset)) == EOF )
break;
/* Update the motion related elements to the boost calculation */
accumulate_frame_motion_stats( cpi, &this_frame,
&this_frame_mv_in_out, &mv_in_out_accumulator,
&abs_mv_in_out_accumulator, &mv_ratio_accumulator );
/* Calculate the baseline boost number for this frame */
r = calc_frame_boost( cpi, &this_frame, this_frame_mv_in_out );
/* We want to discount the the flash frame itself and the recovery
* frame that follows as both will have poor scores.
*/
flash_detected = detect_flash(cpi, (i+offset)) ||
detect_flash(cpi, (i+offset+1));
/* Cumulative effect of prediction quality decay */
if ( !flash_detected )
{
decay_accumulator =
decay_accumulator *
get_prediction_decay_rate(cpi, &this_frame);
decay_accumulator =
decay_accumulator < 0.1 ? 0.1 : decay_accumulator;
}
boost_score += (decay_accumulator * r);
/* Break out conditions. */
if ( (!flash_detected) &&
((mv_ratio_accumulator > 100.0) ||
(abs_mv_in_out_accumulator > 3.0) ||
(mv_in_out_accumulator < -2.0) ) )
{
break;
}
}
*f_boost = (int)(boost_score * 100.0) >> 4;
/* Reset for backward looking loop */
boost_score = 0.0;
mv_ratio_accumulator = 0.0;
decay_accumulator = 1.0;
this_frame_mv_in_out = 0.0;
mv_in_out_accumulator = 0.0;
abs_mv_in_out_accumulator = 0.0;
/* Search forward from the proposed arf/next gf position */
for ( i = -1; i >= -b_frames; i-- )
{
if ( read_frame_stats(cpi, &this_frame, (i+offset)) == EOF )
break;
/* Update the motion related elements to the boost calculation */
accumulate_frame_motion_stats( cpi, &this_frame,
&this_frame_mv_in_out, &mv_in_out_accumulator,
&abs_mv_in_out_accumulator, &mv_ratio_accumulator );
/* Calculate the baseline boost number for this frame */
r = calc_frame_boost( cpi, &this_frame, this_frame_mv_in_out );
/* We want to discount the the flash frame itself and the recovery
* frame that follows as both will have poor scores.
*/
flash_detected = detect_flash(cpi, (i+offset)) ||
detect_flash(cpi, (i+offset+1));
/* Cumulative effect of prediction quality decay */
if ( !flash_detected )
{
decay_accumulator =
decay_accumulator *
get_prediction_decay_rate(cpi, &this_frame);
decay_accumulator =
decay_accumulator < 0.1 ? 0.1 : decay_accumulator;
}
boost_score += (decay_accumulator * r);
/* Break out conditions. */
if ( (!flash_detected) &&
((mv_ratio_accumulator > 100.0) ||
(abs_mv_in_out_accumulator > 3.0) ||
(mv_in_out_accumulator < -2.0) ) )
{
break;
}
}
*b_boost = (int)(boost_score * 100.0) >> 4;
return (*f_boost + *b_boost);
}
#endif
/* Analyse and define a gf/arf group . */
static void define_gf_group(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
{
FIRSTPASS_STATS next_frame;
FIRSTPASS_STATS *start_pos;
int i;
double r;
double boost_score = 0.0;
double old_boost_score = 0.0;
double gf_group_err = 0.0;
double gf_first_frame_err = 0.0;
double mod_frame_err = 0.0;
double mv_ratio_accumulator = 0.0;
double decay_accumulator = 1.0;
double loop_decay_rate = 1.00; /* Starting decay rate */
double this_frame_mv_in_out = 0.0;
double mv_in_out_accumulator = 0.0;
double abs_mv_in_out_accumulator = 0.0;
double mod_err_per_mb_accumulator = 0.0;
int max_bits = frame_max_bits(cpi); /* Max for a single frame */
unsigned int allow_alt_ref =
cpi->oxcf.play_alternate && cpi->oxcf.lag_in_frames;
int alt_boost = 0;
int f_boost = 0;
int b_boost = 0;
int flash_detected;
cpi->twopass.gf_group_bits = 0;
cpi->twopass.gf_decay_rate = 0;
vp8_clear_system_state();
start_pos = cpi->twopass.stats_in;
memset(&next_frame, 0, sizeof(next_frame)); /* assure clean */
/* Load stats for the current frame. */
mod_frame_err = calculate_modified_err(cpi, this_frame);
/* Note the error of the frame at the start of the group (this will be
* the GF frame error if we code a normal gf
*/
gf_first_frame_err = mod_frame_err;
/* Special treatment if the current frame is a key frame (which is also
* a gf). If it is then its error score (and hence bit allocation) need
* to be subtracted out from the calculation for the GF group
*/
if (cpi->common.frame_type == KEY_FRAME)
gf_group_err -= gf_first_frame_err;
/* Scan forward to try and work out how many frames the next gf group
* should contain and what level of boost is appropriate for the GF
* or ARF that will be coded with the group
*/
i = 0;
while (((i < cpi->twopass.static_scene_max_gf_interval) ||
((cpi->twopass.frames_to_key - i) < MIN_GF_INTERVAL)) &&
(i < cpi->twopass.frames_to_key))
{
i++;
/* Accumulate error score of frames in this gf group */
mod_frame_err = calculate_modified_err(cpi, this_frame);
gf_group_err += mod_frame_err;
mod_err_per_mb_accumulator +=
mod_frame_err / DOUBLE_DIVIDE_CHECK((double)cpi->common.MBs);
if (EOF == input_stats(cpi, &next_frame))
break;
/* Test for the case where there is a brief flash but the prediction
* quality back to an earlier frame is then restored.
*/
flash_detected = detect_flash(cpi, 0);
/* Update the motion related elements to the boost calculation */
accumulate_frame_motion_stats( cpi, &next_frame,
&this_frame_mv_in_out, &mv_in_out_accumulator,
&abs_mv_in_out_accumulator, &mv_ratio_accumulator );
/* Calculate a baseline boost number for this frame */
r = calc_frame_boost( cpi, &next_frame, this_frame_mv_in_out );
/* Cumulative effect of prediction quality decay */
if ( !flash_detected )
{
loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame);
decay_accumulator = decay_accumulator * loop_decay_rate;
decay_accumulator =
decay_accumulator < 0.1 ? 0.1 : decay_accumulator;
}
boost_score += (decay_accumulator * r);
/* Break clause to detect very still sections after motion
* For example a staic image after a fade or other transition.
*/
if ( detect_transition_to_still( cpi, i, 5,
loop_decay_rate,
decay_accumulator ) )
{
allow_alt_ref = 0;
boost_score = old_boost_score;
break;
}
/* Break out conditions. */
if (
/* Break at cpi->max_gf_interval unless almost totally static */
(i >= cpi->max_gf_interval && (decay_accumulator < 0.995)) ||
(
/* Dont break out with a very short interval */
(i > MIN_GF_INTERVAL) &&
/* Dont break out very close to a key frame */
((cpi->twopass.frames_to_key - i) >= MIN_GF_INTERVAL) &&
((boost_score > 20.0) || (next_frame.pcnt_inter < 0.75)) &&
(!flash_detected) &&
((mv_ratio_accumulator > 100.0) ||
(abs_mv_in_out_accumulator > 3.0) ||
(mv_in_out_accumulator < -2.0) ||
((boost_score - old_boost_score) < 2.0))
) )
{
boost_score = old_boost_score;
break;
}
memcpy(this_frame, &next_frame, sizeof(*this_frame));
old_boost_score = boost_score;
}
cpi->twopass.gf_decay_rate =
(i > 0) ? (int)(100.0 * (1.0 - decay_accumulator)) / i : 0;
/* When using CBR apply additional buffer related upper limits */
if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER)
{
double max_boost;
/* For cbr apply buffer related limits */
if (cpi->drop_frames_allowed)
{
int64_t df_buffer_level = cpi->oxcf.drop_frames_water_mark *
(cpi->oxcf.optimal_buffer_level / 100);
if (cpi->buffer_level > df_buffer_level)
max_boost = ((double)((cpi->buffer_level - df_buffer_level) * 2 / 3) * 16.0) / DOUBLE_DIVIDE_CHECK((double)cpi->av_per_frame_bandwidth);
else
max_boost = 0.0;
}
else if (cpi->buffer_level > 0)
{
max_boost = ((double)(cpi->buffer_level * 2 / 3) * 16.0) / DOUBLE_DIVIDE_CHECK((double)cpi->av_per_frame_bandwidth);
}
else
{
max_boost = 0.0;
}
if (boost_score > max_boost)
boost_score = max_boost;
}
/* Dont allow conventional gf too near the next kf */
if ((cpi->twopass.frames_to_key - i) < MIN_GF_INTERVAL)
{
while (i < cpi->twopass.frames_to_key)
{
i++;
if (EOF == input_stats(cpi, this_frame))
break;
if (i < cpi->twopass.frames_to_key)
{
mod_frame_err = calculate_modified_err(cpi, this_frame);
gf_group_err += mod_frame_err;
}
}
}
cpi->gfu_boost = (int)(boost_score * 100.0) >> 4;
#if NEW_BOOST
/* Alterrnative boost calculation for alt ref */
alt_boost = calc_arf_boost( cpi, 0, (i-1), (i-1), &f_boost, &b_boost );
#endif
/* Should we use the alternate refernce frame */
if (allow_alt_ref &&
(i >= MIN_GF_INTERVAL) &&
/* dont use ARF very near next kf */
(i <= (cpi->twopass.frames_to_key - MIN_GF_INTERVAL)) &&
#if NEW_BOOST
((next_frame.pcnt_inter > 0.75) ||
(next_frame.pcnt_second_ref > 0.5)) &&
((mv_in_out_accumulator / (double)i > -0.2) ||
(mv_in_out_accumulator > -2.0)) &&
(b_boost > 100) &&
(f_boost > 100) )
#else
(next_frame.pcnt_inter > 0.75) &&
((mv_in_out_accumulator / (double)i > -0.2) ||
(mv_in_out_accumulator > -2.0)) &&
(cpi->gfu_boost > 100) &&
(cpi->twopass.gf_decay_rate <=
(ARF_DECAY_THRESH + (cpi->gfu_boost / 200))) )
#endif
{
int Boost;
int allocation_chunks;
int Q = (cpi->oxcf.fixed_q < 0)
? cpi->last_q[INTER_FRAME] : cpi->oxcf.fixed_q;
int tmp_q;
int arf_frame_bits = 0;
int group_bits;
#if NEW_BOOST
cpi->gfu_boost = alt_boost;
#endif
/* Estimate the bits to be allocated to the group as a whole */
if ((cpi->twopass.kf_group_bits > 0) &&
(cpi->twopass.kf_group_error_left > 0))
{
group_bits = (int)((double)cpi->twopass.kf_group_bits *
(gf_group_err / (double)cpi->twopass.kf_group_error_left));
}
else
group_bits = 0;
/* Boost for arf frame */
#if NEW_BOOST
Boost = (alt_boost * GFQ_ADJUSTMENT) / 100;
#else
Boost = (cpi->gfu_boost * 3 * GFQ_ADJUSTMENT) / (2 * 100);
#endif
Boost += (i * 50);
/* Set max and minimum boost and hence minimum allocation */
if (Boost > ((cpi->baseline_gf_interval + 1) * 200))
Boost = ((cpi->baseline_gf_interval + 1) * 200);
else if (Boost < 125)
Boost = 125;
allocation_chunks = (i * 100) + Boost;
/* Normalize Altboost and allocations chunck down to prevent overflow */
while (Boost > 1000)
{
Boost /= 2;
allocation_chunks /= 2;
}
/* Calculate the number of bits to be spent on the arf based on the
* boost number
*/
arf_frame_bits = (int)((double)Boost * (group_bits /
(double)allocation_chunks));
/* Estimate if there are enough bits available to make worthwhile use
* of an arf.
*/
tmp_q = estimate_q(cpi, mod_frame_err, (int)arf_frame_bits);
/* Only use an arf if it is likely we will be able to code
* it at a lower Q than the surrounding frames.
*/
if (tmp_q < cpi->worst_quality)
{
int half_gf_int;
int frames_after_arf;
int frames_bwd = cpi->oxcf.arnr_max_frames - 1;
int frames_fwd = cpi->oxcf.arnr_max_frames - 1;
cpi->source_alt_ref_pending = 1;
/*
* For alt ref frames the error score for the end frame of the
* group (the alt ref frame) should not contribute to the group
* total and hence the number of bit allocated to the group.
* Rather it forms part of the next group (it is the GF at the
* start of the next group)
* gf_group_err -= mod_frame_err;
*
* For alt ref frames alt ref frame is technically part of the
* GF frame for the next group but we always base the error
* calculation and bit allocation on the current group of frames.
*
* Set the interval till the next gf or arf.
* For ARFs this is the number of frames to be coded before the
* future frame that is coded as an ARF.
* The future frame itself is part of the next group
*/
cpi->baseline_gf_interval = i;
/*
* Define the arnr filter width for this group of frames:
* We only filter frames that lie within a distance of half
* the GF interval from the ARF frame. We also have to trap
* cases where the filter extends beyond the end of clip.
* Note: this_frame->frame has been updated in the loop
* so it now points at the ARF frame.
*/
half_gf_int = cpi->baseline_gf_interval >> 1;
frames_after_arf = (int)(cpi->twopass.total_stats.count -
this_frame->frame - 1);
switch (cpi->oxcf.arnr_type)
{
case 1: /* Backward filter */
frames_fwd = 0;
if (frames_bwd > half_gf_int)
frames_bwd = half_gf_int;
break;
case 2: /* Forward filter */
if (frames_fwd > half_gf_int)
frames_fwd = half_gf_int;
if (frames_fwd > frames_after_arf)
frames_fwd = frames_after_arf;
frames_bwd = 0;
break;
case 3: /* Centered filter */
default:
frames_fwd >>= 1;
if (frames_fwd > frames_after_arf)
frames_fwd = frames_after_arf;
if (frames_fwd > half_gf_int)
frames_fwd = half_gf_int;
frames_bwd = frames_fwd;
/* For even length filter there is one more frame backward
* than forward: e.g. len=6 ==> bbbAff, len=7 ==> bbbAfff.
*/
if (frames_bwd < half_gf_int)
frames_bwd += (cpi->oxcf.arnr_max_frames+1) & 0x1;
break;
}
cpi->active_arnr_frames = frames_bwd + 1 + frames_fwd;
}
else
{
cpi->source_alt_ref_pending = 0;
cpi->baseline_gf_interval = i;
}
}
else
{
cpi->source_alt_ref_pending = 0;
cpi->baseline_gf_interval = i;
}
/*
* Now decide how many bits should be allocated to the GF group as a
* proportion of those remaining in the kf group.
* The final key frame group in the clip is treated as a special case
* where cpi->twopass.kf_group_bits is tied to cpi->twopass.bits_left.
* This is also important for short clips where there may only be one
* key frame.
*/
if (cpi->twopass.frames_to_key >= (int)(cpi->twopass.total_stats.count -
cpi->common.current_video_frame))
{
cpi->twopass.kf_group_bits =
(cpi->twopass.bits_left > 0) ? cpi->twopass.bits_left : 0;
}
/* Calculate the bits to be allocated to the group as a whole */
if ((cpi->twopass.kf_group_bits > 0) &&
(cpi->twopass.kf_group_error_left > 0))
{
cpi->twopass.gf_group_bits =
(int64_t)(cpi->twopass.kf_group_bits *
(gf_group_err / cpi->twopass.kf_group_error_left));
}
else
cpi->twopass.gf_group_bits = 0;
cpi->twopass.gf_group_bits =
(cpi->twopass.gf_group_bits < 0)
? 0
: (cpi->twopass.gf_group_bits > cpi->twopass.kf_group_bits)
? cpi->twopass.kf_group_bits : cpi->twopass.gf_group_bits;
/* Clip cpi->twopass.gf_group_bits based on user supplied data rate
* variability limit (cpi->oxcf.two_pass_vbrmax_section)
*/
if (cpi->twopass.gf_group_bits >
(int64_t)max_bits * cpi->baseline_gf_interval)
cpi->twopass.gf_group_bits =
(int64_t)max_bits * cpi->baseline_gf_interval;
/* Reset the file position */
reset_fpf_position(cpi, start_pos);
/* Update the record of error used so far (only done once per gf group) */
cpi->twopass.modified_error_used += gf_group_err;
/* Assign bits to the arf or gf. */
for (i = 0; i <= (cpi->source_alt_ref_pending && cpi->common.frame_type != KEY_FRAME); i++) {
int Boost;
int allocation_chunks;
int Q = (cpi->oxcf.fixed_q < 0) ? cpi->last_q[INTER_FRAME] : cpi->oxcf.fixed_q;
int gf_bits;
/* For ARF frames */
if (cpi->source_alt_ref_pending && i == 0)
{
#if NEW_BOOST
Boost = (alt_boost * GFQ_ADJUSTMENT) / 100;
#else
Boost = (cpi->gfu_boost * 3 * GFQ_ADJUSTMENT) / (2 * 100);
#endif
Boost += (cpi->baseline_gf_interval * 50);
/* Set max and minimum boost and hence minimum allocation */
if (Boost > ((cpi->baseline_gf_interval + 1) * 200))
Boost = ((cpi->baseline_gf_interval + 1) * 200);
else if (Boost < 125)
Boost = 125;
allocation_chunks =
((cpi->baseline_gf_interval + 1) * 100) + Boost;
}
/* Else for standard golden frames */
else
{
/* boost based on inter / intra ratio of subsequent frames */
Boost = (cpi->gfu_boost * GFQ_ADJUSTMENT) / 100;
/* Set max and minimum boost and hence minimum allocation */
if (Boost > (cpi->baseline_gf_interval * 150))
Boost = (cpi->baseline_gf_interval * 150);
else if (Boost < 125)
Boost = 125;
allocation_chunks =
(cpi->baseline_gf_interval * 100) + (Boost - 100);
}
/* Normalize Altboost and allocations chunck down to prevent overflow */
while (Boost > 1000)
{
Boost /= 2;
allocation_chunks /= 2;
}
/* Calculate the number of bits to be spent on the gf or arf based on
* the boost number
*/
gf_bits = (int)((double)Boost *
(cpi->twopass.gf_group_bits /
(double)allocation_chunks));
/* If the frame that is to be boosted is simpler than the average for
* the gf/arf group then use an alternative calculation
* based on the error score of the frame itself
*/
if (mod_frame_err < gf_group_err / (double)cpi->baseline_gf_interval)
{
double alt_gf_grp_bits;
int alt_gf_bits;
alt_gf_grp_bits =
(double)cpi->twopass.kf_group_bits *
(mod_frame_err * (double)cpi->baseline_gf_interval) /
DOUBLE_DIVIDE_CHECK((double)cpi->twopass.kf_group_error_left);
alt_gf_bits = (int)((double)Boost * (alt_gf_grp_bits /
(double)allocation_chunks));
if (gf_bits > alt_gf_bits)
{
gf_bits = alt_gf_bits;
}
}
/* Else if it is harder than other frames in the group make sure it at
* least receives an allocation in keeping with its relative error
* score, otherwise it may be worse off than an "un-boosted" frame
*/
else
{
int alt_gf_bits =
(int)((double)cpi->twopass.kf_group_bits *
mod_frame_err /
DOUBLE_DIVIDE_CHECK((double)cpi->twopass.kf_group_error_left));
if (alt_gf_bits > gf_bits)
{
gf_bits = alt_gf_bits;
}
}
/* Apply an additional limit for CBR */
if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER)
{
if (cpi->twopass.gf_bits > (int)(cpi->buffer_level >> 1))
cpi->twopass.gf_bits = (int)(cpi->buffer_level >> 1);
}
/* Dont allow a negative value for gf_bits */
if (gf_bits < 0)
gf_bits = 0;
/* Add in minimum for a frame */
gf_bits += cpi->min_frame_bandwidth;
if (i == 0)
{
cpi->twopass.gf_bits = gf_bits;
}
if (i == 1 || (!cpi->source_alt_ref_pending && (cpi->common.frame_type != KEY_FRAME)))
{
/* Per frame bit target for this frame */
cpi->per_frame_bandwidth = gf_bits;
}
}
{
/* Adjust KF group bits and error remainin */
cpi->twopass.kf_group_error_left -= (int64_t)gf_group_err;
cpi->twopass.kf_group_bits -= cpi->twopass.gf_group_bits;
if (cpi->twopass.kf_group_bits < 0)
cpi->twopass.kf_group_bits = 0;
/* Note the error score left in the remaining frames of the group.
* For normal GFs we want to remove the error score for the first
* frame of the group (except in Key frame case where this has
* already happened)
*/
if (!cpi->source_alt_ref_pending && cpi->common.frame_type != KEY_FRAME)
cpi->twopass.gf_group_error_left = (int)(gf_group_err -
gf_first_frame_err);
else
cpi->twopass.gf_group_error_left = (int) gf_group_err;
cpi->twopass.gf_group_bits -= cpi->twopass.gf_bits - cpi->min_frame_bandwidth;
if (cpi->twopass.gf_group_bits < 0)
cpi->twopass.gf_group_bits = 0;
/* This condition could fail if there are two kfs very close together
* despite (MIN_GF_INTERVAL) and would cause a devide by 0 in the
* calculation of cpi->twopass.alt_extra_bits.
*/
if ( cpi->baseline_gf_interval >= 3 )
{
#if NEW_BOOST
int boost = (cpi->source_alt_ref_pending)
? b_boost : cpi->gfu_boost;
#else
int boost = cpi->gfu_boost;
#endif
if ( boost >= 150 )
{
int pct_extra;
pct_extra = (boost - 100) / 50;
pct_extra = (pct_extra > 20) ? 20 : pct_extra;
cpi->twopass.alt_extra_bits =
(int)(cpi->twopass.gf_group_bits * pct_extra) / 100;
cpi->twopass.gf_group_bits -= cpi->twopass.alt_extra_bits;
cpi->twopass.alt_extra_bits /=
((cpi->baseline_gf_interval-1)>>1);
}
else
cpi->twopass.alt_extra_bits = 0;
}
else
cpi->twopass.alt_extra_bits = 0;
}
/* Adjustments based on a measure of complexity of the section */
if (cpi->common.frame_type != KEY_FRAME)
{
FIRSTPASS_STATS sectionstats;
double Ratio;
zero_stats(&sectionstats);
reset_fpf_position(cpi, start_pos);
for (i = 0 ; i < cpi->baseline_gf_interval ; i++)
{
input_stats(cpi, &next_frame);
accumulate_stats(&sectionstats, &next_frame);
}
avg_stats(&sectionstats);
cpi->twopass.section_intra_rating = (unsigned int)
(sectionstats.intra_error /
DOUBLE_DIVIDE_CHECK(sectionstats.coded_error));
Ratio = sectionstats.intra_error / DOUBLE_DIVIDE_CHECK(sectionstats.coded_error);
cpi->twopass.section_max_qfactor = 1.0 - ((Ratio - 10.0) * 0.025);
if (cpi->twopass.section_max_qfactor < 0.80)
cpi->twopass.section_max_qfactor = 0.80;
reset_fpf_position(cpi, start_pos);
}
}
/* Allocate bits to a normal frame that is neither a gf an arf or a key frame. */
static void assign_std_frame_bits(VP8_COMP *cpi, FIRSTPASS_STATS *this_frame)
{
int target_frame_size;
double modified_err;
double err_fraction;
int max_bits = frame_max_bits(cpi); /* Max for a single frame */
/* Calculate modified prediction error used in bit allocation */
modified_err = calculate_modified_err(cpi, this_frame);
/* What portion of the remaining GF group error is used by this frame */
if (cpi->twopass.gf_group_error_left > 0)
err_fraction = modified_err / cpi->twopass.gf_group_error_left;
else
err_fraction = 0.0;
/* How many of those bits available for allocation should we give it? */
target_frame_size = (int)((double)cpi->twopass.gf_group_bits * err_fraction);
/* Clip to target size to 0 - max_bits (or cpi->twopass.gf_group_bits)
* at the top end.
*/
if (target_frame_size < 0)
target_frame_size = 0;
else
{
if (target_frame_size > max_bits)
target_frame_size = max_bits;
if (target_frame_size > cpi->twopass.gf_group_bits)
target_frame_size = (int)cpi->twopass.gf_group_bits;
}
/* Adjust error and bits remaining */
cpi->twopass.gf_group_error_left -= (int)modified_err;
cpi->twopass.gf_group_bits -= target_frame_size;
if (cpi->twopass.gf_group_bits < 0)
cpi->twopass.gf_group_bits = 0;
/* Add in the minimum number of bits that is set aside for every frame. */
target_frame_size += cpi->min_frame_bandwidth;
/* Every other frame gets a few extra bits */
if ( (cpi->frames_since_golden & 0x01) &&
(cpi->frames_till_gf_update_due > 0) )
{
target_frame_size += cpi->twopass.alt_extra_bits;
}
/* Per frame bit target for this frame */
cpi->per_frame_bandwidth = target_frame_size;
}
void vp8_second_pass(VP8_COMP *cpi)
{
int tmp_q;
int frames_left = (int)(cpi->twopass.total_stats.count - cpi->common.current_video_frame);
FIRSTPASS_STATS this_frame = {0};
FIRSTPASS_STATS this_frame_copy;
double this_frame_intra_error;
double this_frame_coded_error;
int overhead_bits;
if (!cpi->twopass.stats_in)
{
return ;
}
vp8_clear_system_state();
if (EOF == input_stats(cpi, &this_frame))
return;
this_frame_intra_error = this_frame.intra_error;
this_frame_coded_error = this_frame.coded_error;
/* keyframe and section processing ! */
if (cpi->twopass.frames_to_key == 0)
{
/* Define next KF group and assign bits to it */
memcpy(&this_frame_copy, &this_frame, sizeof(this_frame));
find_next_key_frame(cpi, &this_frame_copy);
/* Special case: Error error_resilient_mode mode does not make much
* sense for two pass but with its current meaning this code is
* designed to stop outlandish behaviour if someone does set it when
* using two pass. It effectively disables GF groups. This is
* temporary code until we decide what should really happen in this
* case.
*/
if (cpi->oxcf.error_resilient_mode)
{
cpi->twopass.gf_group_bits = cpi->twopass.kf_group_bits;
cpi->twopass.gf_group_error_left =
(int)cpi->twopass.kf_group_error_left;
cpi->baseline_gf_interval = cpi->twopass.frames_to_key;
cpi->frames_till_gf_update_due = cpi->baseline_gf_interval;
cpi->source_alt_ref_pending = 0;
}
}
/* Is this a GF / ARF (Note that a KF is always also a GF) */
if (cpi->frames_till_gf_update_due == 0)
{
/* Define next gf group and assign bits to it */
memcpy(&this_frame_copy, &this_frame, sizeof(this_frame));
define_gf_group(cpi, &this_frame_copy);
/* If we are going to code an altref frame at the end of the group
* and the current frame is not a key frame.... If the previous
* group used an arf this frame has already benefited from that arf
* boost and it should not be given extra bits If the previous
* group was NOT coded using arf we may want to apply some boost to
* this GF as well
*/
if (cpi->source_alt_ref_pending && (cpi->common.frame_type != KEY_FRAME))
{
/* Assign a standard frames worth of bits from those allocated
* to the GF group
*/
int bak = cpi->per_frame_bandwidth;
memcpy(&this_frame_copy, &this_frame, sizeof(this_frame));
assign_std_frame_bits(cpi, &this_frame_copy);
cpi->per_frame_bandwidth = bak;
}
}
/* Otherwise this is an ordinary frame */
else
{
/* Special case: Error error_resilient_mode mode does not make much
* sense for two pass but with its current meaning but this code is
* designed to stop outlandish behaviour if someone does set it
* when using two pass. It effectively disables GF groups. This is
* temporary code till we decide what should really happen in this
* case.
*/
if (cpi->oxcf.error_resilient_mode)
{
cpi->frames_till_gf_update_due = cpi->twopass.frames_to_key;
if (cpi->common.frame_type != KEY_FRAME)
{
/* Assign bits from those allocated to the GF group */
memcpy(&this_frame_copy, &this_frame, sizeof(this_frame));
assign_std_frame_bits(cpi, &this_frame_copy);
}
}
else
{
/* Assign bits from those allocated to the GF group */
memcpy(&this_frame_copy, &this_frame, sizeof(this_frame));
assign_std_frame_bits(cpi, &this_frame_copy);
}
}
/* Keep a globally available copy of this and the next frame's iiratio. */
cpi->twopass.this_iiratio = (unsigned int)(this_frame_intra_error /
DOUBLE_DIVIDE_CHECK(this_frame_coded_error));
{
FIRSTPASS_STATS next_frame;
if ( lookup_next_frame_stats(cpi, &next_frame) != EOF )
{
cpi->twopass.next_iiratio = (unsigned int)(next_frame.intra_error /
DOUBLE_DIVIDE_CHECK(next_frame.coded_error));
}
}
/* Set nominal per second bandwidth for this frame */
cpi->target_bandwidth = (int)
(cpi->per_frame_bandwidth * cpi->output_framerate);
if (cpi->target_bandwidth < 0)
cpi->target_bandwidth = 0;
/* Account for mv, mode and other overheads. */
overhead_bits = (int)estimate_modemvcost(
cpi, &cpi->twopass.total_left_stats );
/* Special case code for first frame. */
if (cpi->common.current_video_frame == 0)
{
cpi->twopass.est_max_qcorrection_factor = 1.0;
/* Set a cq_level in constrained quality mode. */
if ( cpi->oxcf.end_usage == USAGE_CONSTRAINED_QUALITY )
{
int est_cq;
est_cq =
estimate_cq( cpi,
&cpi->twopass.total_left_stats,
(int)(cpi->twopass.bits_left / frames_left),
overhead_bits );
cpi->cq_target_quality = cpi->oxcf.cq_level;
if ( est_cq > cpi->cq_target_quality )
cpi->cq_target_quality = est_cq;
}
/* guess at maxq needed in 2nd pass */
cpi->twopass.maxq_max_limit = cpi->worst_quality;
cpi->twopass.maxq_min_limit = cpi->best_quality;
tmp_q = estimate_max_q(
cpi,
&cpi->twopass.total_left_stats,
(int)(cpi->twopass.bits_left / frames_left),
overhead_bits );
/* Limit the maxq value returned subsequently.
* This increases the risk of overspend or underspend if the initial
* estimate for the clip is bad, but helps prevent excessive
* variation in Q, especially near the end of a clip
* where for example a small overspend may cause Q to crash
*/
cpi->twopass.maxq_max_limit = ((tmp_q + 32) < cpi->worst_quality)
? (tmp_q + 32) : cpi->worst_quality;
cpi->twopass.maxq_min_limit = ((tmp_q - 32) > cpi->best_quality)
? (tmp_q - 32) : cpi->best_quality;
cpi->active_worst_quality = tmp_q;
cpi->ni_av_qi = tmp_q;
}
/* The last few frames of a clip almost always have to few or too many
* bits and for the sake of over exact rate control we dont want to make
* radical adjustments to the allowed quantizer range just to use up a
* few surplus bits or get beneath the target rate.
*/
else if ( (cpi->common.current_video_frame <
(((unsigned int)cpi->twopass.total_stats.count * 255)>>8)) &&
((cpi->common.current_video_frame + cpi->baseline_gf_interval) <
(unsigned int)cpi->twopass.total_stats.count) )
{
if (frames_left < 1)
frames_left </