| /* |
| * Copyright (c) 2002 - 2003 |
| * NetGroup, Politecnico di Torino (Italy) |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the Politecnico di Torino nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| #include <config.h> |
| #endif |
| |
| #include "ftmacros.h" |
| #include "varattrs.h" |
| |
| #include <errno.h> // for the errno variable |
| #include <stdlib.h> // for malloc(), free(), ... |
| #include <string.h> // for strlen(), ... |
| |
| #ifdef _WIN32 |
| #include <process.h> // for threads |
| #else |
| #include <unistd.h> |
| #include <pthread.h> |
| #include <sys/time.h> |
| #include <sys/types.h> // for select() and such |
| #include <pwd.h> // for password management |
| #endif |
| |
| #ifdef HAVE_GETSPNAM |
| #include <shadow.h> // for password management |
| #endif |
| |
| #include <pcap.h> // for libpcap/WinPcap calls |
| |
| #include "fmtutils.h" |
| #include "sockutils.h" // for socket calls |
| #include "portability.h" |
| #include "rpcap-protocol.h" |
| #include "daemon.h" |
| #include "log.h" |
| |
| #define RPCAP_TIMEOUT_INIT 90 /* Initial timeout for RPCAP connections (default: 90 sec) */ |
| #define RPCAP_TIMEOUT_RUNTIME 180 /* Run-time timeout for RPCAP connections (default: 3 min) */ |
| #define RPCAP_SUSPEND_WRONGAUTH 1 /* If the authentication is wrong, stops 1 sec before accepting a new auth message */ |
| |
| // Parameters for the service loop. |
| struct daemon_slpars |
| { |
| SOCKET sockctrl_in; //!< SOCKET ID of the input side of the control connection |
| SOCKET sockctrl_out; //!< SOCKET ID of the output side of the control connection |
| uint8 protocol_version; //!< negotiated protocol version |
| int isactive; //!< Not null if the daemon has to run in active mode |
| int nullAuthAllowed; //!< '1' if we permit NULL authentication, '0' otherwise |
| }; |
| |
| /* |
| * Data for a session managed by a thread. |
| */ |
| struct session { |
| SOCKET sockctrl_out; |
| SOCKET sockdata; |
| uint8 protocol_version; |
| pcap_t *fp; |
| unsigned int TotCapt; |
| }; |
| |
| // |
| // Structure to refer to a thread. |
| // It includes both a Boolean indicating whether we *have* a thread, |
| // and a platform-dependent (UN*X vs. Windows) identifier for the |
| // thread; on Windows, we could use an invalid handle to indicate |
| // that we don't have a thread, but there *is* no portable "no thread" |
| // value for a pthread_t on UN*X. |
| // |
| struct thread_handle { |
| int have_thread; |
| #ifdef _WIN32 |
| HANDLE thread; |
| #else |
| pthread_t thread; |
| #endif |
| }; |
| |
| // Locally defined functions |
| static int daemon_msg_err(SOCKET sockctrl_in, uint32 plen); |
| static int daemon_msg_auth_req(struct daemon_slpars *pars, uint32 plen); |
| static int daemon_AuthUserPwd(char *username, char *password, char *errbuf); |
| |
| static int daemon_msg_findallif_req(struct daemon_slpars *pars, uint32 plen); |
| |
| static int daemon_msg_open_req(struct daemon_slpars *pars, uint32 plen, char *source, size_t sourcelen); |
| static int daemon_msg_startcap_req(struct daemon_slpars *pars, uint32 plen, struct thread_handle *threaddata, char *source, struct session **sessionp, struct rpcap_sampling *samp_param); |
| static int daemon_msg_endcap_req(struct daemon_slpars *pars, struct session *session, struct thread_handle *threaddata); |
| |
| static int daemon_msg_updatefilter_req(struct daemon_slpars *pars, struct session *session, uint32 plen); |
| static int daemon_unpackapplyfilter(SOCKET sockctrl_in, struct session *session, uint32 *plenp, char *errbuf); |
| |
| static int daemon_msg_stats_req(struct daemon_slpars *pars, struct session *session, uint32 plen, struct pcap_stat *stats, unsigned int svrcapt); |
| |
| static int daemon_msg_setsampling_req(struct daemon_slpars *pars, uint32 plen, struct rpcap_sampling *samp_param); |
| |
| static void daemon_seraddr(struct sockaddr_storage *sockaddrin, struct rpcap_sockaddr *sockaddrout); |
| #ifdef _WIN32 |
| static unsigned __stdcall daemon_thrdatamain(void *ptr); |
| #else |
| static void *daemon_thrdatamain(void *ptr); |
| #endif |
| |
| static int rpcapd_recv_msg_header(SOCKET sock, struct rpcap_header *headerp); |
| static int rpcapd_recv(SOCKET sock, char *buffer, size_t toread, uint32 *plen, char *errmsgbuf); |
| static int rpcapd_discard(SOCKET sock, uint32 len); |
| |
| int |
| daemon_serviceloop(SOCKET sockctrl_in, SOCKET sockctrl_out, int isactive, int nullAuthAllowed) |
| { |
| struct daemon_slpars pars; // service loop parameters |
| char errbuf[PCAP_ERRBUF_SIZE + 1]; // keeps the error string, prior to be printed |
| char errmsgbuf[PCAP_ERRBUF_SIZE + 1]; // buffer for errors to send to the client |
| int nrecv; |
| struct rpcap_header header; // RPCAP message general header |
| uint32 plen; // payload length from header |
| int authenticated = 0; // 1 if the client has successfully authenticated |
| char source[PCAP_BUF_SIZE+1]; // keeps the string that contains the interface to open |
| int got_source = 0; // 1 if we've gotten the source from an open request |
| struct session *session = NULL; // struct session main variable |
| const char *msg_type_string; // string for message type |
| int client_told_us_to_close = 0; // 1 if the client told us to close the capture |
| |
| struct thread_handle threaddata; // 'read from daemon and send to client' thread |
| |
| // needed to save the values of the statistics |
| struct pcap_stat stats; |
| unsigned int svrcapt; |
| |
| struct rpcap_sampling samp_param; // in case sampling has been requested |
| |
| // Structures needed for the select() call |
| fd_set rfds; // set of socket descriptors we have to check |
| struct timeval tv; // maximum time the select() can block waiting for data |
| int retval; // select() return value |
| |
| // Set parameters structure |
| pars.sockctrl_in = sockctrl_in; |
| pars.sockctrl_out = sockctrl_out; |
| pars.protocol_version = 0; // not yet known |
| pars.isactive = isactive; // active mode |
| pars.nullAuthAllowed = nullAuthAllowed; |
| |
| // We don't have a thread yet. |
| threaddata.have_thread = 0; |
| // |
| // We *shouldn't* have to initialize the thread indicator |
| // itself, because the compiler *should* realize that we |
| // only use this if have_thread isn't 0, but we *do* have |
| // to do it, because not all compilers *do* realize that. |
| // |
| // There is no "invalid thread handle" value for a UN*X |
| // pthread_t, so we just zero it out. |
| // |
| #ifdef _WIN32 |
| threaddata.thread = INVALID_HANDLE_VALUE; |
| #else |
| memset(&threaddata.thread, 0, sizeof(threaddata.thread)); |
| #endif |
| |
| *errbuf = 0; // Initialize errbuf |
| |
| // |
| // The client must first authenticate; loop until they send us a |
| // message with a version we support and credentials we accept, |
| // they send us a close message indicating that they're giving up, |
| // or we get a network error or other fatal error. |
| // |
| while (!authenticated) |
| { |
| // |
| // If we're in active mode, we have to check for the |
| // initial timeout. |
| // |
| // XXX - do this on *every* trip through the loop? |
| // |
| if (!pars.isactive) |
| { |
| FD_ZERO(&rfds); |
| // We do not have to block here |
| tv.tv_sec = RPCAP_TIMEOUT_INIT; |
| tv.tv_usec = 0; |
| |
| FD_SET(pars.sockctrl_in, &rfds); |
| |
| retval = select(pars.sockctrl_in + 1, &rfds, NULL, NULL, &tv); |
| if (retval == -1) |
| { |
| sock_geterror("select failed: ", errmsgbuf, PCAP_ERRBUF_SIZE); |
| if (rpcap_senderror(pars.sockctrl_out, 0, PCAP_ERR_NETW, errmsgbuf, errbuf) == -1) |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| |
| // The timeout has expired |
| // So, this was a fake connection. Drop it down |
| if (retval == 0) |
| { |
| if (rpcap_senderror(pars.sockctrl_out, 0, PCAP_ERR_INITTIMEOUT, "The RPCAP initial timeout has expired", errbuf) == -1) |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| } |
| |
| // |
| // Read the message header from the client. |
| // |
| nrecv = rpcapd_recv_msg_header(pars.sockctrl_in, &header); |
| if (nrecv == -1) |
| { |
| // Fatal error. |
| goto end; |
| } |
| if (nrecv == -2) |
| { |
| // Client closed the connection. |
| goto end; |
| } |
| |
| plen = header.plen; |
| |
| // |
| // Did the client specify a version we can handle? |
| // |
| if (!RPCAP_VERSION_IS_SUPPORTED(header.ver)) |
| { |
| // |
| // Tell them it's not a valid protocol version. |
| // |
| uint8 reply_version; |
| |
| // |
| // If RPCAP_MIN_VERSION is 0, no version is too |
| // old, as the oldest supported version is 0, |
| // and there are no negative versions. |
| // |
| #if RPCAP_MIN_VERSION != 0 |
| if (header.ver < RPCAP_MIN_VERSION) |
| { |
| // |
| // Their maximum version is too old; |
| // there *is* no version we can both |
| // handle, and they might reject |
| // an error with a version they don't |
| // understand, so reply with the |
| // version they sent. That may |
| // make them retry with that version, |
| // but they'll give up on that |
| // failure. |
| // |
| reply_version = header.ver; |
| } |
| else |
| #endif |
| { |
| // |
| // Their maximum version is too new, |
| // but they might be able to handle |
| // *our* maximum version, so reply |
| // with that version. |
| // |
| reply_version = RPCAP_MAX_VERSION; |
| } |
| if (rpcap_senderror(pars.sockctrl_out, reply_version, |
| PCAP_ERR_WRONGVER, "RPCAP version number mismatch", |
| errbuf) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| |
| // Discard the rest of the message. |
| if (rpcapd_discard(pars.sockctrl_in, plen) == -1) |
| { |
| // Network error. |
| goto end; |
| } |
| |
| // Let them try again. |
| continue; |
| } |
| |
| // |
| // OK, we use the version the client specified. |
| // |
| pars.protocol_version = header.ver; |
| |
| switch (header.type) |
| { |
| case RPCAP_MSG_AUTH_REQ: |
| retval = daemon_msg_auth_req(&pars, plen); |
| if (retval == -1) |
| { |
| // Fatal error; a message has |
| // been logged, so just give up. |
| goto end; |
| } |
| if (retval == -2) |
| { |
| // Non-fatal error; we sent back |
| // an error message, so let them |
| // try again. |
| continue; |
| } |
| |
| // OK, we're authenticated; we sent back |
| // a reply, so start serving requests. |
| authenticated = 1; |
| break; |
| |
| case RPCAP_MSG_CLOSE: |
| // |
| // The client is giving up. |
| // Discard the rest of the message, if |
| // there is anything more. |
| // |
| (void)rpcapd_discard(pars.sockctrl_in, plen); |
| // We're done with this client. |
| goto end; |
| |
| case RPCAP_MSG_ERROR: |
| // Log this and close the connection? |
| // XXX - is this what happens in active |
| // mode, where *we* initiate the |
| // connection, and the client gives us |
| // an error message rather than a "let |
| // me log in" message, indicating that |
| // we're not allowed to connect to them? |
| (void)daemon_msg_err(pars.sockctrl_in, plen); |
| goto end; |
| |
| case RPCAP_MSG_FINDALLIF_REQ: |
| case RPCAP_MSG_OPEN_REQ: |
| case RPCAP_MSG_STARTCAP_REQ: |
| case RPCAP_MSG_UPDATEFILTER_REQ: |
| case RPCAP_MSG_STATS_REQ: |
| case RPCAP_MSG_ENDCAP_REQ: |
| case RPCAP_MSG_SETSAMPLING_REQ: |
| // |
| // These requests can't be sent until |
| // the client is authenticated. |
| // |
| msg_type_string = rpcap_msg_type_string(header.type); |
| if (msg_type_string != NULL) |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "%s request sent before authentication was completed", msg_type_string); |
| } |
| else |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Message of type %u sent before authentication was completed", header.type); |
| } |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, PCAP_ERR_WRONGMSG, |
| errmsgbuf, errbuf) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| // Discard the rest of the message. |
| if (rpcapd_discard(pars.sockctrl_in, plen) == -1) |
| { |
| // Network error. |
| goto end; |
| } |
| break; |
| |
| case RPCAP_MSG_PACKET: |
| case RPCAP_MSG_FINDALLIF_REPLY: |
| case RPCAP_MSG_OPEN_REPLY: |
| case RPCAP_MSG_STARTCAP_REPLY: |
| case RPCAP_MSG_UPDATEFILTER_REPLY: |
| case RPCAP_MSG_AUTH_REPLY: |
| case RPCAP_MSG_STATS_REPLY: |
| case RPCAP_MSG_ENDCAP_REPLY: |
| case RPCAP_MSG_SETSAMPLING_REPLY: |
| // |
| // These are server-to-client messages. |
| // |
| msg_type_string = rpcap_msg_type_string(header.type); |
| if (msg_type_string != NULL) |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Server-to-client message %s received from client", msg_type_string); |
| } |
| else |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Server-to-client message of type %u received from client", header.type); |
| } |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, PCAP_ERR_WRONGMSG, |
| errmsgbuf, errbuf) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| // Discard the rest of the message. |
| if (rpcapd_discard(pars.sockctrl_in, plen) == -1) |
| { |
| // Fatal error. |
| goto end; |
| } |
| break; |
| |
| default: |
| // |
| // Unknown message type. |
| // |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Unknown message type %u", header.type); |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, PCAP_ERR_WRONGMSG, |
| errmsgbuf, errbuf) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| // Discard the rest of the message. |
| if (rpcapd_discard(pars.sockctrl_in, plen) == -1) |
| { |
| // Fatal error. |
| goto end; |
| } |
| break; |
| } |
| } |
| |
| // |
| // OK, the client has authenticated itself, and we can start |
| // processing regular requests from it. |
| // |
| |
| // |
| // We don't have any statistics yet. |
| // |
| stats.ps_ifdrop = 0; |
| stats.ps_recv = 0; |
| stats.ps_drop = 0; |
| svrcapt = 0; |
| |
| // |
| // Service requests. |
| // |
| for (;;) |
| { |
| errbuf[0] = 0; // clear errbuf |
| |
| // Avoid zombies connections; check if the connection is opens but no commands are performed |
| // from more than RPCAP_TIMEOUT_RUNTIME |
| // Conditions: |
| // - I have to be in normal mode (no active mode) |
| // - if the device is open, I don't have to be in the middle of a capture (session->sockdata) |
| // - if the device is closed, I have always to check if a new command arrives |
| // |
| // Be carefully: the capture can have been started, but an error occurred (so session != NULL, but |
| // sockdata is 0 |
| if ((!pars.isactive) && ((session == NULL) || ((session != NULL) && (session->sockdata == 0)))) |
| { |
| // Check for the initial timeout |
| FD_ZERO(&rfds); |
| // We do not have to block here |
| tv.tv_sec = RPCAP_TIMEOUT_RUNTIME; |
| tv.tv_usec = 0; |
| |
| FD_SET(pars.sockctrl_in, &rfds); |
| |
| retval = select(pars.sockctrl_in + 1, &rfds, NULL, NULL, &tv); |
| if (retval == -1) |
| { |
| sock_geterror("select failed: ", errmsgbuf, PCAP_ERRBUF_SIZE); |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, PCAP_ERR_NETW, |
| errmsgbuf, errbuf) == -1) |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| |
| // The timeout has expired |
| // So, this was a fake connection. Drop it down |
| if (retval == 0) |
| { |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, |
| PCAP_ERR_INITTIMEOUT, |
| "The RPCAP initial timeout has expired", |
| errbuf) == -1) |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| } |
| |
| // |
| // Read the message header from the client. |
| // |
| nrecv = rpcapd_recv_msg_header(pars.sockctrl_in, &header); |
| if (nrecv == -1) |
| { |
| // Fatal error. |
| goto end; |
| } |
| if (nrecv == -2) |
| { |
| // Client closed the connection. |
| goto end; |
| } |
| |
| plen = header.plen; |
| |
| // |
| // Did the client specify the version we negotiated? |
| // |
| // For now, there's only one version. |
| // |
| if (header.ver != pars.protocol_version) |
| { |
| // |
| // Tell them it's not the negotiated version. |
| // Send the error message with their version, |
| // so they don't reject it as having the wrong |
| // version. |
| // |
| if (rpcap_senderror(pars.sockctrl_out, |
| header.ver, PCAP_ERR_WRONGVER, |
| "RPCAP version in message isn't the negotiated version", |
| errbuf) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| |
| // Discard the rest of the message. |
| (void)rpcapd_discard(pars.sockctrl_in, plen); |
| // Give up on them. |
| goto end; |
| } |
| |
| switch (header.type) |
| { |
| case RPCAP_MSG_ERROR: // The other endpoint reported an error |
| { |
| (void)daemon_msg_err(pars.sockctrl_in, plen); |
| // Do nothing; just exit; the error code is already into the errbuf |
| // XXX - actually exit.... |
| break; |
| } |
| |
| case RPCAP_MSG_FINDALLIF_REQ: |
| { |
| if (daemon_msg_findallif_req(&pars, plen) == -1) |
| { |
| // Fatal error; a message has |
| // been logged, so just give up. |
| goto end; |
| } |
| break; |
| } |
| |
| case RPCAP_MSG_OPEN_REQ: |
| { |
| // |
| // Process the open request, and keep |
| // the source from it, for use later |
| // when the capture is started. |
| // |
| // XXX - we don't care if the client sends |
| // us multiple open requests, the last |
| // one wins. |
| // |
| retval = daemon_msg_open_req(&pars, plen, source, sizeof(source)); |
| if (retval == -1) |
| { |
| // Fatal error; a message has |
| // been logged, so just give up. |
| goto end; |
| } |
| got_source = 1; |
| break; |
| } |
| |
| case RPCAP_MSG_STARTCAP_REQ: |
| { |
| if (!got_source) |
| { |
| // They never told us what device |
| // to capture on! |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, |
| PCAP_ERR_STARTCAPTURE, |
| "No capture device was specified", |
| errbuf) == -1) |
| { |
| // Fatal error; log an |
| // error and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| if (rpcapd_discard(pars.sockctrl_in, plen) == -1) |
| { |
| goto end; |
| } |
| break; |
| } |
| |
| if (daemon_msg_startcap_req(&pars, plen, &threaddata, source, &session, &samp_param) == -1) |
| { |
| // Fatal error; a message has |
| // been logged, so just give up. |
| goto end; |
| } |
| break; |
| } |
| |
| case RPCAP_MSG_UPDATEFILTER_REQ: |
| { |
| if (session) |
| { |
| if (daemon_msg_updatefilter_req(&pars, session, plen) == -1) |
| { |
| // Fatal error; a message has |
| // been logged, so just give up. |
| goto end; |
| } |
| } |
| else |
| { |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, |
| PCAP_ERR_UPDATEFILTER, |
| "Device not opened. Cannot update filter", |
| errbuf) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| } |
| break; |
| } |
| |
| case RPCAP_MSG_CLOSE: // The other endpoint close the pcap session |
| { |
| // |
| // Indicate to our caller that the client |
| // closed the control connection. |
| // This is used only in case of active mode. |
| // |
| client_told_us_to_close = 1; |
| SOCK_DEBUG_MESSAGE("The other end system asked to close the connection."); |
| goto end; |
| } |
| |
| case RPCAP_MSG_STATS_REQ: |
| { |
| if (daemon_msg_stats_req(&pars, session, plen, &stats, svrcapt) == -1) |
| { |
| // Fatal error; a message has |
| // been logged, so just give up. |
| goto end; |
| } |
| break; |
| } |
| |
| case RPCAP_MSG_ENDCAP_REQ: // The other endpoint close the current capture session |
| { |
| if (session) |
| { |
| // Save statistics (we can need them in the future) |
| if (pcap_stats(session->fp, &stats)) |
| { |
| svrcapt = session->TotCapt; |
| } |
| else |
| { |
| stats.ps_ifdrop = 0; |
| stats.ps_recv = 0; |
| stats.ps_drop = 0; |
| svrcapt = 0; |
| } |
| |
| if (daemon_msg_endcap_req(&pars, session, &threaddata) == -1) |
| { |
| free(session); |
| session = NULL; |
| // Fatal error; a message has |
| // been logged, so just give up. |
| goto end; |
| } |
| free(session); |
| session = NULL; |
| } |
| else |
| { |
| rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, |
| PCAP_ERR_ENDCAPTURE, |
| "Device not opened. Cannot close the capture", |
| errbuf); |
| } |
| break; |
| } |
| |
| case RPCAP_MSG_SETSAMPLING_REQ: |
| { |
| if (daemon_msg_setsampling_req(&pars, plen, &samp_param) == -1) |
| { |
| // Fatal error; a message has |
| // been logged, so just give up. |
| goto end; |
| } |
| break; |
| } |
| |
| case RPCAP_MSG_AUTH_REQ: |
| { |
| // |
| // We're already authenticated; you don't |
| // get to reauthenticate. |
| // |
| rpcapd_log(LOGPRIO_INFO, "The client sent an RPCAP_MSG_AUTH_REQ message after authentication was completed"); |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, |
| PCAP_ERR_WRONGMSG, |
| "RPCAP_MSG_AUTH_REQ request sent after authentication was completed", |
| errbuf) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| // Discard the rest of the message. |
| if (rpcapd_discard(pars.sockctrl_in, plen) == -1) |
| { |
| // Fatal error. |
| goto end; |
| } |
| goto end; |
| |
| case RPCAP_MSG_PACKET: |
| case RPCAP_MSG_FINDALLIF_REPLY: |
| case RPCAP_MSG_OPEN_REPLY: |
| case RPCAP_MSG_STARTCAP_REPLY: |
| case RPCAP_MSG_UPDATEFILTER_REPLY: |
| case RPCAP_MSG_AUTH_REPLY: |
| case RPCAP_MSG_STATS_REPLY: |
| case RPCAP_MSG_ENDCAP_REPLY: |
| case RPCAP_MSG_SETSAMPLING_REPLY: |
| // |
| // These are server-to-client messages. |
| // |
| msg_type_string = rpcap_msg_type_string(header.type); |
| if (msg_type_string != NULL) |
| { |
| rpcapd_log(LOGPRIO_INFO, "The client sent a %s server-to-client message", msg_type_string); |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Server-to-client message %s received from client", msg_type_string); |
| } |
| else |
| { |
| rpcapd_log(LOGPRIO_INFO, "The client sent a server-to-client message of type %u", header.type); |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Server-to-client message of type %u received from client", header.type); |
| } |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, PCAP_ERR_WRONGMSG, |
| errmsgbuf, errbuf) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| // Discard the rest of the message. |
| if (rpcapd_discard(pars.sockctrl_in, plen) == -1) |
| { |
| // Fatal error. |
| goto end; |
| } |
| goto end; |
| |
| default: |
| // |
| // Unknown message type. |
| // |
| rpcapd_log(LOGPRIO_INFO, "The client sent a message of type %u", header.type); |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Unknown message type %u", header.type); |
| if (rpcap_senderror(pars.sockctrl_out, |
| pars.protocol_version, PCAP_ERR_WRONGMSG, |
| errbuf, errmsgbuf) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto end; |
| } |
| // Discard the rest of the message. |
| if (rpcapd_discard(pars.sockctrl_in, plen) == -1) |
| { |
| // Fatal error. |
| goto end; |
| } |
| goto end; |
| } |
| } |
| } |
| |
| end: |
| // The child thread is about to end |
| |
| // perform pcap_t cleanup, in case it has not been done |
| if (session) |
| { |
| if (threaddata.have_thread) |
| { |
| #ifdef _WIN32 |
| // |
| // Tell the data connection thread main capture |
| // loop to break out of that loop. |
| // |
| pcap_breakloop(session->fp); |
| |
| // |
| // If it's currently blocked waiting for packets |
| // to arrive, try to wake it up, so it can see |
| // the "break out of the loop" indication. |
| // |
| SetEvent(pcap_getevent(session->fp)); |
| |
| // |
| // Wait for the thread to exit, so we don't close |
| // sockets out from under it. |
| // |
| // XXX - have a timeout, so we don't wait forever? |
| // |
| WaitForSingleObject(threaddata.thread, INFINITE); |
| |
| // |
| // Release the thread handle, as we're done with |
| // it. |
| // |
| CloseHandle(threaddata.thread); |
| #else |
| pthread_cancel(threaddata.thread); |
| #endif |
| threaddata.have_thread = 0; |
| } |
| if (session->sockdata) |
| { |
| sock_close(session->sockdata, NULL, 0); |
| session->sockdata = 0; |
| } |
| pcap_close(session->fp); |
| free(session); |
| session = NULL; |
| } |
| |
| // Print message and return |
| SOCK_DEBUG_MESSAGE("I'm exiting from the child loop"); |
| SOCK_DEBUG_MESSAGE(errbuf); |
| |
| return client_told_us_to_close; |
| } |
| |
| /* |
| * This handles the RPCAP_MSG_ERR message. |
| */ |
| static int |
| daemon_msg_err(SOCKET sockctrl_in, uint32 plen) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE]; |
| char remote_errbuf[PCAP_ERRBUF_SIZE]; |
| |
| if (plen >= PCAP_ERRBUF_SIZE) |
| { |
| /* |
| * Message is too long; just read as much of it as we |
| * can into the buffer provided, and discard the rest. |
| */ |
| if (sock_recv(sockctrl_in, remote_errbuf, PCAP_ERRBUF_SIZE - 1, |
| SOCK_RECEIVEALL_YES|SOCK_EOF_IS_ERROR, errbuf, |
| PCAP_ERRBUF_SIZE) == -1) |
| { |
| // Network error. |
| rpcapd_log(LOGPRIO_ERROR, "Read from client failed: %s", errbuf); |
| return -1; |
| } |
| if (rpcapd_discard(sockctrl_in, plen - (PCAP_ERRBUF_SIZE - 1)) == -1) |
| { |
| // Network error. |
| return -1; |
| } |
| |
| /* |
| * Null-terminate it. |
| */ |
| remote_errbuf[PCAP_ERRBUF_SIZE - 1] = '\0'; |
| } |
| else if (plen == 0) |
| { |
| /* Empty error string. */ |
| remote_errbuf[0] = '\0'; |
| } |
| else |
| { |
| if (sock_recv(sockctrl_in, remote_errbuf, plen, |
| SOCK_RECEIVEALL_YES|SOCK_EOF_IS_ERROR, errbuf, |
| PCAP_ERRBUF_SIZE) == -1) |
| { |
| // Network error. |
| rpcapd_log(LOGPRIO_ERROR, "Read from client failed: %s", errbuf); |
| return -1; |
| } |
| |
| /* |
| * Null-terminate it. |
| */ |
| remote_errbuf[plen] = '\0'; |
| } |
| // Log the message |
| rpcapd_log(LOGPRIO_ERROR, "Error from client: %s", remote_errbuf); |
| return 0; |
| } |
| |
| /* |
| * This handles the RPCAP_MSG_AUTH_REQ message. |
| * It checks if the authentication credentials supplied by the user are valid. |
| * |
| * This function is called if the daemon receives a RPCAP_MSG_AUTH_REQ |
| * message in its authentication loop. It reads the body of the |
| * authentication message from the network and checks whether the |
| * credentials are valid. |
| * |
| * \param sockctrl: the socket for the control connection. |
| * |
| * \param nullAuthAllowed: '1' if the NULL authentication is allowed. |
| * |
| * \param errbuf: a user-allocated buffer in which the error message |
| * (if one) has to be written. It must be at least PCAP_ERRBUF_SIZE |
| * bytes long. |
| * |
| * \return '0' if everything is fine, '-1' if an unrecoverable error occurred, |
| * or '-2' if the authentication failed. For errors, an error message is |
| * returned in the 'errbuf' variable; this gives a message for the |
| * unrecoverable error or for the authentication failure. |
| */ |
| static int |
| daemon_msg_auth_req(struct daemon_slpars *pars, uint32 plen) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE]; // buffer for network errors |
| char errmsgbuf[PCAP_ERRBUF_SIZE]; // buffer for errors to send to the client |
| struct rpcap_header header; // RPCAP message general header |
| int status; |
| struct rpcap_auth auth; // RPCAP authentication header |
| |
| status = rpcapd_recv(pars->sockctrl_in, (char *) &auth, sizeof(struct rpcap_auth), &plen, errmsgbuf); |
| if (status == -1) |
| { |
| return -1; |
| } |
| if (status == -2) |
| { |
| goto error; |
| } |
| |
| switch (ntohs(auth.type)) |
| { |
| case RPCAP_RMTAUTH_NULL: |
| { |
| if (!pars->nullAuthAllowed) |
| { |
| // Send the client an error reply. |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Authentication failed; NULL authentication not permitted."); |
| goto error; |
| } |
| break; |
| } |
| |
| case RPCAP_RMTAUTH_PWD: |
| { |
| char *username, *passwd; |
| uint32 usernamelen, passwdlen; |
| |
| usernamelen = ntohs(auth.slen1); |
| username = (char *) malloc (usernamelen + 1); |
| if (username == NULL) |
| { |
| pcap_fmt_errmsg_for_errno(errmsgbuf, |
| PCAP_ERRBUF_SIZE, errno, "malloc() failed"); |
| goto error; |
| } |
| status = rpcapd_recv(pars->sockctrl_in, username, usernamelen, &plen, errmsgbuf); |
| if (status == -1) |
| { |
| free(username); |
| return -1; |
| } |
| if (status == -2) |
| { |
| free(username); |
| goto error; |
| } |
| username[usernamelen] = '\0'; |
| |
| passwdlen = ntohs(auth.slen2); |
| passwd = (char *) malloc (passwdlen + 1); |
| if (passwd == NULL) |
| { |
| pcap_fmt_errmsg_for_errno(errmsgbuf, |
| PCAP_ERRBUF_SIZE, errno, "malloc() failed"); |
| free(username); |
| goto error; |
| } |
| status = rpcapd_recv(pars->sockctrl_in, passwd, passwdlen, &plen, errmsgbuf); |
| if (status == -1) |
| { |
| free(username); |
| free(passwd); |
| return -1; |
| } |
| if (status == -2) |
| { |
| free(username); |
| free(passwd); |
| goto error; |
| } |
| passwd[passwdlen] = '\0'; |
| |
| if (daemon_AuthUserPwd(username, passwd, errmsgbuf)) |
| { |
| // |
| // Authentication failed. Let the client |
| // know. |
| // |
| free(username); |
| free(passwd); |
| if (rpcap_senderror(pars->sockctrl_out, |
| pars->protocol_version, |
| PCAP_ERR_AUTH, errmsgbuf, errbuf) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| // |
| // Suspend for 1 second, so that they can't |
| // hammer us with repeated tries with an |
| // attack such as a dictionary attack. |
| // |
| // WARNING: this delay is inserted only |
| // at this point; if the client closes the |
| // connection and reconnects, the suspension |
| // time does not have any effect. |
| // |
| sleep_secs(RPCAP_SUSPEND_WRONGAUTH); |
| goto error_noreply; |
| } |
| |
| free(username); |
| free(passwd); |
| break; |
| } |
| |
| default: |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Authentication type not recognized."); |
| goto error; |
| } |
| |
| // The authentication succeeded; let the client know. |
| rpcap_createhdr(&header, pars->protocol_version, RPCAP_MSG_AUTH_REPLY, 0, 0); |
| |
| // Send the ok message back |
| if (sock_send(pars->sockctrl_out, (char *) &header, sizeof (struct rpcap_header), errbuf, PCAP_ERRBUF_SIZE) == -1) |
| { |
| // That failed; log a messsage and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| // Check if all the data has been read; if not, discard the data in excess |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| return -1; |
| } |
| |
| return 0; |
| |
| error: |
| if (rpcap_senderror(pars->sockctrl_out, pars->protocol_version, |
| PCAP_ERR_AUTH, errmsgbuf, errbuf) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| error_noreply: |
| // Check if all the data has been read; if not, discard the data in excess |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| return -1; |
| } |
| |
| return -2; |
| } |
| |
| static int |
| daemon_AuthUserPwd(char *username, char *password, char *errbuf) |
| { |
| #ifdef _WIN32 |
| /* |
| * Warning: the user which launches the process must have the |
| * SE_TCB_NAME right. |
| * This corresponds to have the "Act as part of the Operating System" |
| * turned on (administrative tools, local security settings, local |
| * policies, user right assignment) |
| * However, it seems to me that if you run it as a service, this |
| * right should be provided by default. |
| */ |
| HANDLE Token; |
| if (LogonUser(username, ".", password, LOGON32_LOGON_NETWORK, LOGON32_PROVIDER_DEFAULT, &Token) == 0) |
| { |
| int error; |
| |
| error = GetLastError(); |
| FormatMessageA(FORMAT_MESSAGE_FROM_SYSTEM, NULL, error, 0, errbuf, |
| PCAP_ERRBUF_SIZE, NULL); |
| |
| return -1; |
| } |
| |
| // This call should change the current thread to the selected user. |
| // I didn't test it. |
| if (ImpersonateLoggedOnUser(Token) == 0) |
| { |
| int error; |
| |
| error = GetLastError(); |
| FormatMessageA(FORMAT_MESSAGE_FROM_SYSTEM, NULL, error, 0, errbuf, |
| PCAP_ERRBUF_SIZE, NULL); |
| |
| CloseHandle(Token); |
| return -1; |
| } |
| |
| CloseHandle(Token); |
| return 0; |
| |
| #else |
| /* |
| * See |
| * |
| * http://www.unixpapa.com/incnote/passwd.html |
| * |
| * We use the Solaris/Linux shadow password authentication if |
| * we have getspnam(), otherwise we just do traditional |
| * authentication, which, on some platforms, might work, even |
| * with shadow passwords, if we're running as root. Traditional |
| * authenticaion won't work if we're not running as root, as |
| * I think these days all UN*Xes either won't return the password |
| * at all with getpwnam() or will only do so if you're root. |
| * |
| * XXX - perhaps what we *should* be using is PAM, if we have |
| * it. That might hide all the details of username/password |
| * authentication, whether it's done with a visible-to-root- |
| * only password database or some other authentication mechanism, |
| * behind its API. |
| */ |
| struct passwd *user; |
| char *user_password; |
| #ifdef HAVE_GETSPNAM |
| struct spwd *usersp; |
| #endif |
| |
| // This call is needed to get the uid |
| if ((user = getpwnam(username)) == NULL) |
| { |
| pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "Authentication failed: no such user"); |
| return -1; |
| } |
| |
| #ifdef HAVE_GETSPNAM |
| // This call is needed to get the password; otherwise 'x' is returned |
| if ((usersp = getspnam(username)) == NULL) |
| { |
| pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "Authentication failed: no such user"); |
| return -1; |
| } |
| user_password = usersp->sp_pwdp; |
| #else |
| /* |
| * XXX - what about other platforms? |
| * The unixpapa.com page claims this Just Works on *BSD if you're |
| * running as root - it's from 2000, so it doesn't indicate whether |
| * macOS (which didn't come out until 2001, under the name Mac OS |
| * X) behaves like the *BSDs or not, and might also work on AIX. |
| * HP-UX does something else. |
| * |
| * Again, hopefully PAM hides all that. |
| */ |
| user_password = user->pw_passwd; |
| #endif |
| |
| if (strcmp(user_password, (char *) crypt(password, user_password)) != 0) |
| { |
| pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "Authentication failed: password incorrect"); |
| return -1; |
| } |
| |
| if (setuid(user->pw_uid)) |
| { |
| pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, |
| errno, "setuid"); |
| return -1; |
| } |
| |
| /* if (setgid(user->pw_gid)) |
| { |
| pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, |
| errno, "setgid"); |
| return -1; |
| } |
| */ |
| return 0; |
| |
| #endif |
| |
| } |
| |
| static int |
| daemon_msg_findallif_req(struct daemon_slpars *pars, uint32 plen) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE]; // buffer for network errors |
| char errmsgbuf[PCAP_ERRBUF_SIZE]; // buffer for errors to send to the client |
| char sendbuf[RPCAP_NETBUF_SIZE]; // temporary buffer in which data to be sent is buffered |
| int sendbufidx = 0; // index which keeps the number of bytes currently buffered |
| pcap_if_t *alldevs = NULL; // pointer to the header of the interface chain |
| pcap_if_t *d; // temp pointer needed to scan the interface chain |
| struct pcap_addr *address; // pcap structure that keeps a network address of an interface |
| struct rpcap_findalldevs_if *findalldevs_if;// rpcap structure that packet all the data of an interface together |
| uint16 nif = 0; // counts the number of interface listed |
| |
| // Discard the rest of the message; there shouldn't be any payload. |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| // Network error. |
| return -1; |
| } |
| |
| // Retrieve the device list |
| if (pcap_findalldevs(&alldevs, errmsgbuf) == -1) |
| goto error; |
| |
| if (alldevs == NULL) |
| { |
| if (rpcap_senderror(pars->sockctrl_out, pars->protocol_version, |
| PCAP_ERR_NOREMOTEIF, |
| "No interfaces found! Make sure libpcap/WinPcap is properly installed" |
| " and you have the right to access to the remote device.", |
| errbuf) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| return 0; |
| } |
| |
| // checks the number of interfaces and it computes the total length of the payload |
| for (d = alldevs; d != NULL; d = d->next) |
| { |
| nif++; |
| |
| if (d->description) |
| plen+= strlen(d->description); |
| if (d->name) |
| plen+= strlen(d->name); |
| |
| plen+= sizeof(struct rpcap_findalldevs_if); |
| |
| for (address = d->addresses; address != NULL; address = address->next) |
| { |
| /* |
| * Send only IPv4 and IPv6 addresses over the wire. |
| */ |
| switch (address->addr->sa_family) |
| { |
| case AF_INET: |
| #ifdef AF_INET6 |
| case AF_INET6: |
| #endif |
| plen+= (sizeof(struct rpcap_sockaddr) * 4); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| } |
| |
| // RPCAP findalldevs command |
| if (sock_bufferize(NULL, sizeof(struct rpcap_header), NULL, |
| &sendbufidx, RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, |
| PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| rpcap_createhdr((struct rpcap_header *) sendbuf, pars->protocol_version, |
| RPCAP_MSG_FINDALLIF_REPLY, nif, plen); |
| |
| // send the interface list |
| for (d = alldevs; d != NULL; d = d->next) |
| { |
| uint16 lname, ldescr; |
| |
| findalldevs_if = (struct rpcap_findalldevs_if *) &sendbuf[sendbufidx]; |
| |
| if (sock_bufferize(NULL, sizeof(struct rpcap_findalldevs_if), NULL, |
| &sendbufidx, RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| memset(findalldevs_if, 0, sizeof(struct rpcap_findalldevs_if)); |
| |
| if (d->description) ldescr = (short) strlen(d->description); |
| else ldescr = 0; |
| if (d->name) lname = (short) strlen(d->name); |
| else lname = 0; |
| |
| findalldevs_if->desclen = htons(ldescr); |
| findalldevs_if->namelen = htons(lname); |
| findalldevs_if->flags = htonl(d->flags); |
| |
| for (address = d->addresses; address != NULL; address = address->next) |
| { |
| /* |
| * Send only IPv4 and IPv6 addresses over the wire. |
| */ |
| switch (address->addr->sa_family) |
| { |
| case AF_INET: |
| #ifdef AF_INET6 |
| case AF_INET6: |
| #endif |
| findalldevs_if->naddr++; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| findalldevs_if->naddr = htons(findalldevs_if->naddr); |
| |
| if (sock_bufferize(d->name, lname, sendbuf, &sendbufidx, |
| RPCAP_NETBUF_SIZE, SOCKBUF_BUFFERIZE, errmsgbuf, |
| PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| if (sock_bufferize(d->description, ldescr, sendbuf, &sendbufidx, |
| RPCAP_NETBUF_SIZE, SOCKBUF_BUFFERIZE, errmsgbuf, |
| PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| // send all addresses |
| for (address = d->addresses; address != NULL; address = address->next) |
| { |
| struct rpcap_sockaddr *sockaddr; |
| |
| /* |
| * Send only IPv4 and IPv6 addresses over the wire. |
| */ |
| switch (address->addr->sa_family) |
| { |
| case AF_INET: |
| #ifdef AF_INET6 |
| case AF_INET6: |
| #endif |
| sockaddr = (struct rpcap_sockaddr *) &sendbuf[sendbufidx]; |
| if (sock_bufferize(NULL, sizeof(struct rpcap_sockaddr), NULL, |
| &sendbufidx, RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| daemon_seraddr((struct sockaddr_storage *) address->addr, sockaddr); |
| |
| sockaddr = (struct rpcap_sockaddr *) &sendbuf[sendbufidx]; |
| if (sock_bufferize(NULL, sizeof(struct rpcap_sockaddr), NULL, |
| &sendbufidx, RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| daemon_seraddr((struct sockaddr_storage *) address->netmask, sockaddr); |
| |
| sockaddr = (struct rpcap_sockaddr *) &sendbuf[sendbufidx]; |
| if (sock_bufferize(NULL, sizeof(struct rpcap_sockaddr), NULL, |
| &sendbufidx, RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| daemon_seraddr((struct sockaddr_storage *) address->broadaddr, sockaddr); |
| |
| sockaddr = (struct rpcap_sockaddr *) &sendbuf[sendbufidx]; |
| if (sock_bufferize(NULL, sizeof(struct rpcap_sockaddr), NULL, |
| &sendbufidx, RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| daemon_seraddr((struct sockaddr_storage *) address->dstaddr, sockaddr); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| } |
| |
| // We no longer need the device list. Free it. |
| pcap_freealldevs(alldevs); |
| |
| // Send a final command that says "now send it!" |
| if (sock_send(pars->sockctrl_out, sendbuf, sendbufidx, errbuf, PCAP_ERRBUF_SIZE) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| return 0; |
| |
| error: |
| if (alldevs) |
| pcap_freealldevs(alldevs); |
| |
| if (rpcap_senderror(pars->sockctrl_out, pars->protocol_version, |
| PCAP_ERR_FINDALLIF, errmsgbuf, errbuf) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* |
| \param plen: the length of the current message (needed in order to be able |
| to discard excess data in the message, if present) |
| */ |
| static int |
| daemon_msg_open_req(struct daemon_slpars *pars, uint32 plen, char *source, size_t sourcelen) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE]; // buffer for network errors |
| char errmsgbuf[PCAP_ERRBUF_SIZE]; // buffer for errors to send to the client |
| pcap_t *fp; // pcap_t main variable |
| int nread; |
| char sendbuf[RPCAP_NETBUF_SIZE]; // temporary buffer in which data to be sent is buffered |
| int sendbufidx = 0; // index which keeps the number of bytes currently buffered |
| struct rpcap_openreply *openreply; // open reply message |
| |
| if (plen > sourcelen - 1) |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Source string too long"); |
| goto error; |
| } |
| |
| nread = sock_recv(pars->sockctrl_in, source, plen, |
| SOCK_RECEIVEALL_YES|SOCK_EOF_IS_ERROR, errbuf, PCAP_ERRBUF_SIZE); |
| if (nread == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Read from client failed: %s", errbuf); |
| return -1; |
| } |
| source[nread] = '\0'; |
| plen -= nread; |
| |
| // XXX - make sure it's *not* a URL; we don't support opening |
| // remote devices here. |
| |
| // Open the selected device |
| // This is a fake open, since we do that only to get the needed parameters, then we close the device again |
| if ((fp = pcap_open_live(source, |
| 1500 /* fake snaplen */, |
| 0 /* no promis */, |
| 1000 /* fake timeout */, |
| errmsgbuf)) == NULL) |
| goto error; |
| |
| // Now, I can send a RPCAP open reply message |
| if (sock_bufferize(NULL, sizeof(struct rpcap_header), NULL, &sendbufidx, |
| RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| rpcap_createhdr((struct rpcap_header *) sendbuf, pars->protocol_version, |
| RPCAP_MSG_OPEN_REPLY, 0, sizeof(struct rpcap_openreply)); |
| |
| openreply = (struct rpcap_openreply *) &sendbuf[sendbufidx]; |
| |
| if (sock_bufferize(NULL, sizeof(struct rpcap_openreply), NULL, &sendbufidx, |
| RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| memset(openreply, 0, sizeof(struct rpcap_openreply)); |
| openreply->linktype = htonl(pcap_datalink(fp)); |
| openreply->tzoff = 0; /* This is always 0 for live captures */ |
| |
| // We're done with the pcap_t. |
| pcap_close(fp); |
| |
| // Send the reply. |
| if (sock_send(pars->sockctrl_out, sendbuf, sendbufidx, errbuf, PCAP_ERRBUF_SIZE) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| return 0; |
| |
| error: |
| if (rpcap_senderror(pars->sockctrl_out, pars->protocol_version, |
| PCAP_ERR_OPEN, errmsgbuf, errbuf) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| // Check if all the data has been read; if not, discard the data in excess |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* |
| \param plen: the length of the current message (needed in order to be able |
| to discard excess data in the message, if present) |
| */ |
| static int |
| daemon_msg_startcap_req(struct daemon_slpars *pars, uint32 plen, struct thread_handle *threaddata, char *source, struct session **sessionp, struct rpcap_sampling *samp_param _U_) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE]; // buffer for network errors |
| char errmsgbuf[PCAP_ERRBUF_SIZE]; // buffer for errors to send to the client |
| char portdata[PCAP_BUF_SIZE]; // temp variable needed to derive the data port |
| char peerhost[PCAP_BUF_SIZE]; // temp variable needed to derive the host name of our peer |
| struct session *session = NULL; // saves state of session |
| int status; |
| char sendbuf[RPCAP_NETBUF_SIZE]; // temporary buffer in which data to be sent is buffered |
| int sendbufidx = 0; // index which keeps the number of bytes currently buffered |
| |
| // socket-related variables |
| SOCKET sockdata = INVALID_SOCKET; // socket descriptor of the data connection |
| struct addrinfo hints; // temp, needed to open a socket connection |
| struct addrinfo *addrinfo; // temp, needed to open a socket connection |
| struct sockaddr_storage saddr; // temp, needed to retrieve the network data port chosen on the local machine |
| socklen_t saddrlen; // temp, needed to retrieve the network data port chosen on the local machine |
| int ret; // return value from functions |
| |
| #ifndef _WIN32 |
| pthread_attr_t detachedAttribute; // temp, needed to set the created thread as detached |
| #endif |
| |
| // RPCAP-related variables |
| struct rpcap_startcapreq startcapreq; // start capture request message |
| struct rpcap_startcapreply *startcapreply; // start capture reply message |
| int serveropen_dp; // keeps who is going to open the data connection |
| |
| addrinfo = NULL; |
| |
| status = rpcapd_recv(pars->sockctrl_in, (char *) &startcapreq, |
| sizeof(struct rpcap_startcapreq), &plen, errmsgbuf); |
| if (status == -1) |
| { |
| goto fatal_error; |
| } |
| if (status == -2) |
| { |
| goto error; |
| } |
| |
| startcapreq.flags = ntohs(startcapreq.flags); |
| |
| // Create a session structure |
| session = malloc(sizeof(struct session)); |
| if (session == NULL) |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Can't allocate session structure"); |
| goto error; |
| } |
| |
| // Open the selected device |
| if ((session->fp = pcap_open_live(source, |
| ntohl(startcapreq.snaplen), |
| (startcapreq.flags & RPCAP_STARTCAPREQ_FLAG_PROMISC) ? 1 : 0 /* local device, other flags not needed */, |
| ntohl(startcapreq.read_timeout), |
| errmsgbuf)) == NULL) |
| goto error; |
| |
| #if 0 |
| // Apply sampling parameters |
| fp->rmt_samp.method = samp_param->method; |
| fp->rmt_samp.value = samp_param->value; |
| #endif |
| |
| /* |
| We're in active mode if: |
| - we're using TCP, and the user wants us to be in active mode |
| - we're using UDP |
| */ |
| serveropen_dp = (startcapreq.flags & RPCAP_STARTCAPREQ_FLAG_SERVEROPEN) || (startcapreq.flags & RPCAP_STARTCAPREQ_FLAG_DGRAM) || pars->isactive; |
| |
| /* |
| Gets the sockaddr structure referred to the other peer in the ctrl connection |
| |
| We need that because: |
| - if we're in passive mode, we need to know the address family we want to use |
| (the same used for the ctrl socket) |
| - if we're in active mode, we need to know the network address of the other host |
| we want to connect to |
| */ |
| saddrlen = sizeof(struct sockaddr_storage); |
| if (getpeername(pars->sockctrl_in, (struct sockaddr *) &saddr, &saddrlen) == -1) |
| { |
| sock_geterror("getpeername(): ", errmsgbuf, PCAP_ERRBUF_SIZE); |
| goto error; |
| } |
| |
| memset(&hints, 0, sizeof(struct addrinfo)); |
| hints.ai_socktype = (startcapreq.flags & RPCAP_STARTCAPREQ_FLAG_DGRAM) ? SOCK_DGRAM : SOCK_STREAM; |
| hints.ai_family = saddr.ss_family; |
| |
| // Now we have to create a new socket to send packets |
| if (serveropen_dp) // Data connection is opened by the server toward the client |
| { |
| pcap_snprintf(portdata, sizeof portdata, "%d", ntohs(startcapreq.portdata)); |
| |
| // Get the name of the other peer (needed to connect to that specific network address) |
| if (getnameinfo((struct sockaddr *) &saddr, saddrlen, peerhost, |
| sizeof(peerhost), NULL, 0, NI_NUMERICHOST)) |
| { |
| sock_geterror("getnameinfo(): ", errmsgbuf, PCAP_ERRBUF_SIZE); |
| goto error; |
| } |
| |
| if (sock_initaddress(peerhost, portdata, &hints, &addrinfo, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| if ((sockdata = sock_open(addrinfo, SOCKOPEN_CLIENT, 0, errmsgbuf, PCAP_ERRBUF_SIZE)) == INVALID_SOCKET) |
| goto error; |
| } |
| else // Data connection is opened by the client toward the server |
| { |
| hints.ai_flags = AI_PASSIVE; |
| |
| // Let's the server socket pick up a free network port for us |
| if (sock_initaddress(NULL, "0", &hints, &addrinfo, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| if ((sockdata = sock_open(addrinfo, SOCKOPEN_SERVER, 1 /* max 1 connection in queue */, errmsgbuf, PCAP_ERRBUF_SIZE)) == INVALID_SOCKET) |
| goto error; |
| |
| // get the complete sockaddr structure used in the data connection |
| saddrlen = sizeof(struct sockaddr_storage); |
| if (getsockname(sockdata, (struct sockaddr *) &saddr, &saddrlen) == -1) |
| { |
| sock_geterror("getsockname(): ", errmsgbuf, PCAP_ERRBUF_SIZE); |
| goto error; |
| } |
| |
| // Get the local port the system picked up |
| if (getnameinfo((struct sockaddr *) &saddr, saddrlen, NULL, |
| 0, portdata, sizeof(portdata), NI_NUMERICSERV)) |
| { |
| sock_geterror("getnameinfo(): ", errmsgbuf, PCAP_ERRBUF_SIZE); |
| goto error; |
| } |
| } |
| |
| // addrinfo is no longer used |
| freeaddrinfo(addrinfo); |
| addrinfo = NULL; |
| |
| // Needed to send an error on the ctrl connection |
| session->sockctrl_out = pars->sockctrl_out; |
| session->protocol_version = pars->protocol_version; |
| |
| // Now I can set the filter |
| ret = daemon_unpackapplyfilter(pars->sockctrl_in, session, &plen, errmsgbuf); |
| if (ret == -1) |
| { |
| // Fatal error. A message has been logged; just give up. |
| goto fatal_error; |
| } |
| if (ret == -2) |
| { |
| // Non-fatal error. Send an error message to the client. |
| goto error; |
| } |
| |
| // Now, I can send a RPCAP start capture reply message |
| if (sock_bufferize(NULL, sizeof(struct rpcap_header), NULL, &sendbufidx, |
| RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| rpcap_createhdr((struct rpcap_header *) sendbuf, pars->protocol_version, |
| RPCAP_MSG_STARTCAP_REPLY, 0, sizeof(struct rpcap_startcapreply)); |
| |
| startcapreply = (struct rpcap_startcapreply *) &sendbuf[sendbufidx]; |
| |
| if (sock_bufferize(NULL, sizeof(struct rpcap_startcapreply), NULL, |
| &sendbufidx, RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| memset(startcapreply, 0, sizeof(struct rpcap_startcapreply)); |
| startcapreply->bufsize = htonl(pcap_bufsize(session->fp)); |
| |
| if (!serveropen_dp) |
| { |
| unsigned short port = (unsigned short)strtoul(portdata,NULL,10); |
| startcapreply->portdata = htons(port); |
| } |
| |
| if (sock_send(pars->sockctrl_out, sendbuf, sendbufidx, errbuf, PCAP_ERRBUF_SIZE) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| goto fatal_error; |
| } |
| |
| if (!serveropen_dp) |
| { |
| SOCKET socktemp; // We need another socket, since we're going to accept() a connection |
| |
| // Connection creation |
| saddrlen = sizeof(struct sockaddr_storage); |
| |
| socktemp = accept(sockdata, (struct sockaddr *) &saddr, &saddrlen); |
| |
| if (socktemp == INVALID_SOCKET) |
| { |
| sock_geterror("accept(): ", errbuf, PCAP_ERRBUF_SIZE); |
| rpcapd_log(LOGPRIO_ERROR, "Accept of data connection failed: %s", |
| errbuf); |
| goto error; |
| } |
| |
| // Now that I accepted the connection, the server socket is no longer needed |
| sock_close(sockdata, NULL, 0); |
| sockdata = socktemp; |
| } |
| |
| session->sockdata = sockdata; |
| |
| // Now we have to create a new thread to receive packets |
| #ifdef _WIN32 |
| threaddata->thread = (HANDLE)_beginthreadex(NULL, 0, daemon_thrdatamain, |
| (void *) session, 0, NULL); |
| if (threaddata->thread == 0) |
| { |
| pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "Error creating the data thread"); |
| goto error; |
| } |
| #else |
| /* GV we need this to create the thread as detached. */ |
| /* GV otherwise, the thread handle is not destroyed */ |
| pthread_attr_init(&detachedAttribute); |
| pthread_attr_setdetachstate(&detachedAttribute, PTHREAD_CREATE_DETACHED); |
| ret = pthread_create(&threaddata->thread, &detachedAttribute, |
| daemon_thrdatamain, (void *) session); |
| if (ret != 0) |
| { |
| pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, |
| ret, "Error creating the data thread"); |
| pthread_attr_destroy(&detachedAttribute); |
| goto error; |
| } |
| pthread_attr_destroy(&detachedAttribute); |
| #endif |
| threaddata->have_thread = 1; |
| |
| // Check if all the data has been read; if not, discard the data in excess |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| goto fatal_error; |
| |
| *sessionp = session; |
| return 0; |
| |
| error: |
| // |
| // Not a fatal error, so send the client an error message and |
| // keep serving client requests. |
| // |
| *sessionp = NULL; |
| |
| if (addrinfo) |
| freeaddrinfo(addrinfo); |
| |
| if (threaddata->have_thread) |
| { |
| #ifdef _WIN32 |
| if (session->fp) |
| { |
| pcap_breakloop(session->fp); |
| SetEvent(pcap_getevent(session->fp)); |
| } |
| CloseHandle(threaddata->thread); |
| #else |
| pthread_cancel(threaddata->thread); |
| #endif |
| threaddata->have_thread = 0; |
| } |
| |
| if (sockdata != INVALID_SOCKET) |
| sock_close(sockdata, NULL, 0); |
| |
| if (session) |
| { |
| if (session->fp) |
| pcap_close(session->fp); |
| free(session); |
| } |
| |
| if (rpcap_senderror(pars->sockctrl_out, pars->protocol_version, |
| PCAP_ERR_STARTCAPTURE, errmsgbuf, errbuf) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| // Check if all the data has been read; if not, discard the data in excess |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| // Network error. |
| return -1; |
| } |
| |
| return 0; |
| |
| fatal_error: |
| // |
| // Fatal network error, so don't try to communicate with |
| // the client, just give up. |
| // |
| *sessionp = NULL; |
| |
| if (threaddata->have_thread) |
| { |
| #ifdef _WIN32 |
| if (session && session->fp) |
| { |
| // |
| // Tell the data connection thread main capture |
| // loop to break out of that loop. |
| // |
| pcap_breakloop(session->fp); |
| |
| // |
| // If it's currently blocked waiting for packets |
| // to arrive, try to wake it up, so it can see |
| // the "break out of the loop" indication. |
| // |
| SetEvent(pcap_getevent(session->fp)); |
| } |
| |
| // |
| // Wait for the thread to exit, so we don't close |
| // sockets out from under it. |
| // |
| // XXX - have a timeout, so we don't wait forever? |
| // |
| WaitForSingleObject(threaddata->thread, INFINITE); |
| |
| // |
| // Release the thread handle, as we're done with |
| // it. |
| // |
| CloseHandle(threaddata->thread); |
| #else |
| pthread_cancel(threaddata->thread); |
| #endif |
| threaddata->have_thread = 0; |
| } |
| |
| if (sockdata != INVALID_SOCKET) |
| sock_close(sockdata, NULL, 0); |
| |
| if (session) |
| { |
| if (session->fp) |
| pcap_close(session->fp); |
| free(session); |
| } |
| |
| return -1; |
| } |
| |
| static int |
| daemon_msg_endcap_req(struct daemon_slpars *pars, struct session *session, struct thread_handle *threaddata) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE]; // buffer for network errors |
| struct rpcap_header header; |
| |
| if (threaddata->have_thread) |
| { |
| #ifdef _WIN32 |
| // |
| // Tell the data connection thread main capture loop to |
| // break out of that loop. |
| // |
| pcap_breakloop(session->fp); |
| |
| // |
| // If it's currently blocked waiting for packets to |
| // arrive, try to wake it up, so it can see the "break |
| // out of the loop" indication. |
| // |
| SetEvent(pcap_getevent(session->fp)); |
| |
| // |
| // Wait for the thread to exit, so we don't close |
| // sockets out from under it. |
| // |
| // XXX - have a timeout, so we don't wait forever? |
| // |
| WaitForSingleObject(threaddata->thread, INFINITE); |
| |
| // |
| // Release the thread handle, as we're done with |
| // it. |
| // |
| CloseHandle(threaddata->thread); |
| #else |
| pthread_cancel(threaddata->thread); |
| #endif |
| threaddata->have_thread = 0; |
| } |
| if (session->sockdata) |
| { |
| sock_close(session->sockdata, NULL, 0); |
| session->sockdata = 0; |
| } |
| |
| pcap_close(session->fp); |
| |
| rpcap_createhdr(&header, pars->protocol_version, |
| RPCAP_MSG_ENDCAP_REPLY, 0, 0); |
| |
| if (sock_send(pars->sockctrl_out, (char *) &header, sizeof(struct rpcap_header), errbuf, PCAP_ERRBUF_SIZE) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| daemon_unpackapplyfilter(SOCKET sockctrl_in, struct session *session, uint32 *plenp, char *errmsgbuf) |
| { |
| int status; |
| struct rpcap_filter filter; |
| struct rpcap_filterbpf_insn insn; |
| struct bpf_insn *bf_insn; |
| struct bpf_program bf_prog; |
| unsigned int i; |
| |
| status = rpcapd_recv(sockctrl_in, (char *) &filter, |
| sizeof(struct rpcap_filter), plenp, errmsgbuf); |
| if (status == -1) |
| { |
| return -1; |
| } |
| if (status == -2) |
| { |
| return -2; |
| } |
| |
| bf_prog.bf_len = ntohl(filter.nitems); |
| |
| if (ntohs(filter.filtertype) != RPCAP_UPDATEFILTER_BPF) |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Only BPF/NPF filters are currently supported"); |
| return -2; |
| } |
| |
| bf_insn = (struct bpf_insn *) malloc (sizeof(struct bpf_insn) * bf_prog.bf_len); |
| if (bf_insn == NULL) |
| { |
| pcap_fmt_errmsg_for_errno(errmsgbuf, PCAP_ERRBUF_SIZE, |
| errno, "malloc() failed"); |
| return -2; |
| } |
| |
| bf_prog.bf_insns = bf_insn; |
| |
| for (i = 0; i < bf_prog.bf_len; i++) |
| { |
| status = rpcapd_recv(sockctrl_in, (char *) &insn, |
| sizeof(struct rpcap_filterbpf_insn), plenp, errmsgbuf); |
| if (status == -1) |
| { |
| return -1; |
| } |
| if (status == -2) |
| { |
| return -2; |
| } |
| |
| bf_insn->code = ntohs(insn.code); |
| bf_insn->jf = insn.jf; |
| bf_insn->jt = insn.jt; |
| bf_insn->k = ntohl(insn.k); |
| |
| bf_insn++; |
| } |
| |
| if (bpf_validate(bf_prog.bf_insns, bf_prog.bf_len) == 0) |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "The filter contains bogus instructions"); |
| return -2; |
| } |
| |
| if (pcap_setfilter(session->fp, &bf_prog)) |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "RPCAP error: %s", pcap_geterr(session->fp)); |
| return -2; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| daemon_msg_updatefilter_req(struct daemon_slpars *pars, struct session *session, uint32 plen) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE]; |
| char errmsgbuf[PCAP_ERRBUF_SIZE]; // buffer for errors to send to the client |
| int ret; // status of daemon_unpackapplyfilter() |
| struct rpcap_header header; // keeps the answer to the updatefilter command |
| |
| ret = daemon_unpackapplyfilter(pars->sockctrl_in, session, &plen, errmsgbuf); |
| if (ret == -1) |
| { |
| // Fatal error. A message has been logged; just give up. |
| return -1; |
| } |
| if (ret == -2) |
| { |
| // Non-fatal error. Send an error reply to the client. |
| goto error; |
| } |
| |
| // Check if all the data has been read; if not, discard the data in excess |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| // Network error. |
| return -1; |
| } |
| |
| // A response is needed, otherwise the other host does not know that everything went well |
| rpcap_createhdr(&header, pars->protocol_version, |
| RPCAP_MSG_UPDATEFILTER_REPLY, 0, 0); |
| |
| if (sock_send(pars->sockctrl_out, (char *) &header, sizeof (struct rpcap_header), pcap_geterr(session->fp), PCAP_ERRBUF_SIZE)) |
| { |
| // That failed; log a messsage and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| return 0; |
| |
| error: |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| return -1; |
| } |
| rpcap_senderror(pars->sockctrl_out, pars->protocol_version, |
| PCAP_ERR_UPDATEFILTER, errmsgbuf, NULL); |
| |
| return 0; |
| } |
| |
| /*! |
| \brief Received the sampling parameters from remote host and it stores in the pcap_t structure. |
| */ |
| static int |
| daemon_msg_setsampling_req(struct daemon_slpars *pars, uint32 plen, struct rpcap_sampling *samp_param) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE]; // buffer for network errors |
| char errmsgbuf[PCAP_ERRBUF_SIZE]; |
| struct rpcap_header header; |
| struct rpcap_sampling rpcap_samp; |
| int status; |
| |
| status = rpcapd_recv(pars->sockctrl_in, (char *) &rpcap_samp, sizeof(struct rpcap_sampling), &plen, errmsgbuf); |
| if (status == -1) |
| { |
| return -1; |
| } |
| if (status == -2) |
| { |
| goto error; |
| } |
| |
| // Save these settings in the pcap_t |
| samp_param->method = rpcap_samp.method; |
| samp_param->value = ntohl(rpcap_samp.value); |
| |
| // A response is needed, otherwise the other host does not know that everything went well |
| rpcap_createhdr(&header, pars->protocol_version, |
| RPCAP_MSG_SETSAMPLING_REPLY, 0, 0); |
| |
| if (sock_send(pars->sockctrl_out, (char *) &header, sizeof (struct rpcap_header), errbuf, PCAP_ERRBUF_SIZE) == -1) |
| { |
| // That failed; log a messsage and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| return -1; |
| } |
| |
| return 0; |
| |
| error: |
| if (rpcap_senderror(pars->sockctrl_out, pars->protocol_version, |
| PCAP_ERR_AUTH, errmsgbuf, errbuf) == -1) |
| { |
| // That failed; log a message and give up. |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| // Check if all the data has been read; if not, discard the data in excess |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| daemon_msg_stats_req(struct daemon_slpars *pars, struct session *session, uint32 plen, struct pcap_stat *stats, unsigned int svrcapt) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE]; // buffer for network errors |
| char errmsgbuf[PCAP_ERRBUF_SIZE]; // buffer for errors to send to the client |
| char sendbuf[RPCAP_NETBUF_SIZE]; // temporary buffer in which data to be sent is buffered |
| int sendbufidx = 0; // index which keeps the number of bytes currently buffered |
| struct rpcap_stats *netstats; // statistics sent on the network |
| |
| // Checks that the header does not contain other data; if so, discard it |
| if (rpcapd_discard(pars->sockctrl_in, plen) == -1) |
| { |
| // Network error. |
| return -1; |
| } |
| |
| if (sock_bufferize(NULL, sizeof(struct rpcap_header), NULL, |
| &sendbufidx, RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| rpcap_createhdr((struct rpcap_header *) sendbuf, pars->protocol_version, |
| RPCAP_MSG_STATS_REPLY, 0, (uint16) sizeof(struct rpcap_stats)); |
| |
| netstats = (struct rpcap_stats *) &sendbuf[sendbufidx]; |
| |
| if (sock_bufferize(NULL, sizeof(struct rpcap_stats), NULL, |
| &sendbufidx, RPCAP_NETBUF_SIZE, SOCKBUF_CHECKONLY, errmsgbuf, PCAP_ERRBUF_SIZE) == -1) |
| goto error; |
| |
| if (session && session->fp) |
| { |
| if (pcap_stats(session->fp, stats) == -1) |
| { |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "%s", pcap_geterr(session->fp)); |
| goto error; |
| } |
| |
| netstats->ifdrop = htonl(stats->ps_ifdrop); |
| netstats->ifrecv = htonl(stats->ps_recv); |
| netstats->krnldrop = htonl(stats->ps_drop); |
| netstats->svrcapt = htonl(session->TotCapt); |
| } |
| else |
| { |
| // We have to keep compatibility with old applications, |
| // which ask for statistics also when the capture has |
| // already stopped. |
| netstats->ifdrop = htonl(stats->ps_ifdrop); |
| netstats->ifrecv = htonl(stats->ps_recv); |
| netstats->krnldrop = htonl(stats->ps_drop); |
| netstats->svrcapt = htonl(svrcapt); |
| } |
| |
| // Send the packet |
| if (sock_send(pars->sockctrl_out, sendbuf, sendbufidx, errbuf, PCAP_ERRBUF_SIZE) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Send to client failed: %s", errbuf); |
| return -1; |
| } |
| |
| return 0; |
| |
| error: |
| rpcap_senderror(pars->sockctrl_out, pars->protocol_version, |
| PCAP_ERR_GETSTATS, errmsgbuf, NULL); |
| return 0; |
| } |
| |
| #ifdef _WIN32 |
| static unsigned __stdcall |
| #else |
| static void * |
| #endif |
| daemon_thrdatamain(void *ptr) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE + 1]; // error buffer |
| struct session *session; // pointer to the struct session for this session |
| int retval; // general variable used to keep the return value of other functions |
| struct rpcap_pkthdr *net_pkt_header;// header of the packet |
| struct pcap_pkthdr *pkt_header; // pointer to the buffer that contains the header of the current packet |
| u_char *pkt_data; // pointer to the buffer that contains the current packet |
| size_t sendbufsize; // size for the send buffer |
| char *sendbuf; // temporary buffer in which data to be sent is buffered |
| int sendbufidx; // index which keeps the number of bytes currently buffered |
| int status; |
| |
| session = (struct session *) ptr; |
| |
| session->TotCapt = 0; // counter which is incremented each time a packet is received |
| |
| // Initialize errbuf |
| memset(errbuf, 0, sizeof(errbuf)); |
| |
| // |
| // We need a buffer large enough to hold a buffer large enough |
| // for a maximum-size packet for this pcap_t. |
| // |
| if (pcap_snapshot(session->fp) < 0) |
| { |
| // |
| // The snapshot length is negative. |
| // This "should not happen". |
| // |
| rpcapd_log(LOGPRIO_ERROR, |
| "Unable to allocate the buffer for this child thread: snapshot length of %d is negative", |
| pcap_snapshot(session->fp)); |
| sendbuf = NULL; // we can't allocate a buffer, so nothing to free |
| goto error; |
| } |
| // |
| // size_t is unsigned, and the result of pcap_snapshot() is signed; |
| // on no platform that we support is int larger than size_t. |
| // This means that, unless the extra information we prepend to |
| // a maximum-sized packet is impossibly large, the sum of the |
| // snapshot length and the size of that extra information will |
| // fit in a size_t. |
| // |
| // So we don't need to make sure that sendbufsize will overflow. |
| // |
| sendbufsize = sizeof(struct rpcap_header) + sizeof(struct rpcap_pkthdr) + pcap_snapshot(session->fp); |
| sendbuf = (char *) malloc (sendbufsize); |
| if (sendbuf == NULL) |
| { |
| rpcapd_log(LOGPRIO_ERROR, |
| "Unable to allocate the buffer for this child thread"); |
| goto error; |
| } |
| |
| #ifndef _WIN32 |
| // Modify thread params so that it can be killed at any time |
| retval = pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL); |
| if (retval != 0) |
| { |
| pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, |
| retval, "pthread_setcancelstate"); |
| rpcapd_log(LOGPRIO_ERROR, |
| "Can't set cancel state on data thread: %s", errbuf); |
| goto error; |
| } |
| retval = pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL); |
| if (retval != 0) |
| { |
| pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, |
| retval, "pthread_setcanceltype"); |
| rpcapd_log(LOGPRIO_ERROR, |
| "Can't set cancel type on data thread: %s", errbuf); |
| goto error; |
| } |
| #endif |
| |
| // Retrieve the packets |
| while ((retval = pcap_next_ex(session->fp, &pkt_header, (const u_char **) &pkt_data)) >= 0) // cast to avoid a compiler warning |
| { |
| if (retval == 0) // Read timeout elapsed |
| continue; |
| |
| sendbufidx = 0; |
| |
| // Bufferize the general header |
| if (sock_bufferize(NULL, sizeof(struct rpcap_header), NULL, |
| &sendbufidx, sendbufsize, SOCKBUF_CHECKONLY, errbuf, |
| PCAP_ERRBUF_SIZE) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, |
| "sock_bufferize() error sending packet message: %s", |
| errbuf); |
| goto error; |
| } |
| |
| rpcap_createhdr((struct rpcap_header *) sendbuf, |
| session->protocol_version, RPCAP_MSG_PACKET, 0, |
| (uint16) (sizeof(struct rpcap_pkthdr) + pkt_header->caplen)); |
| |
| net_pkt_header = (struct rpcap_pkthdr *) &sendbuf[sendbufidx]; |
| |
| // Bufferize the pkt header |
| if (sock_bufferize(NULL, sizeof(struct rpcap_pkthdr), NULL, |
| &sendbufidx, sendbufsize, SOCKBUF_CHECKONLY, errbuf, |
| PCAP_ERRBUF_SIZE) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, |
| "sock_bufferize() error sending packet message: %s", |
| errbuf); |
| goto error; |
| } |
| |
| net_pkt_header->caplen = htonl(pkt_header->caplen); |
| net_pkt_header->len = htonl(pkt_header->len); |
| net_pkt_header->npkt = htonl(++(session->TotCapt)); |
| net_pkt_header->timestamp_sec = htonl(pkt_header->ts.tv_sec); |
| net_pkt_header->timestamp_usec = htonl(pkt_header->ts.tv_usec); |
| |
| // Bufferize the pkt data |
| if (sock_bufferize((char *) pkt_data, pkt_header->caplen, |
| sendbuf, &sendbufidx, sendbufsize, SOCKBUF_BUFFERIZE, |
| errbuf, PCAP_ERRBUF_SIZE) == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, |
| "sock_bufferize() error sending packet message: %s", |
| errbuf); |
| goto error; |
| } |
| |
| // Send the packet |
| // If the client dropped the connection, don't report an |
| // error, just quit. |
| status = sock_send(session->sockdata, sendbuf, sendbufidx, errbuf, PCAP_ERRBUF_SIZE); |
| if (status < 0) |
| { |
| if (status == -1) |
| { |
| // |
| // Error other than "client closed the |
| // connection out from under us"; report |
| // it. |
| // |
| rpcapd_log(LOGPRIO_ERROR, |
| "Send of packet to client failed: %s", |
| errbuf); |
| } |
| |
| // |
| // Give up in either case. |
| // |
| goto error; |
| } |
| } |
| |
| if (retval == -1) |
| { |
| pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "Error reading the packets: %s", pcap_geterr(session->fp)); |
| rpcap_senderror(session->sockctrl_out, session->protocol_version, |
| PCAP_ERR_READEX, errbuf, NULL); |
| goto error; |
| } |
| |
| error: |
| closesocket(session->sockdata); |
| session->sockdata = 0; |
| |
| free(sendbuf); |
| |
| return 0; |
| } |
| |
| /*! |
| \brief It serializes a network address. |
| |
| It accepts a 'sockaddr_storage' structure as input, and it converts it appropriately into a format |
| that can be used to be sent on the network. Basically, it applies all the hton() |
| conversion required to the input variable. |
| |
| \param sockaddrin a 'sockaddr_storage' pointer to the variable that has to be |
| serialized. This variable can be both a 'sockaddr_in' and 'sockaddr_in6'. |
| |
| \param sockaddrout an 'rpcap_sockaddr' pointer to the variable that will contain |
| the serialized data. This variable has to be allocated by the user. |
| |
| \warning This function supports only AF_INET and AF_INET6 address families. |
| */ |
| static void |
| daemon_seraddr(struct sockaddr_storage *sockaddrin, struct rpcap_sockaddr *sockaddrout) |
| { |
| memset(sockaddrout, 0, sizeof(struct sockaddr_storage)); |
| |
| // There can be the case in which the sockaddrin is not available |
| if (sockaddrin == NULL) return; |
| |
| // Warning: we support only AF_INET and AF_INET6 |
| switch (sockaddrin->ss_family) |
| { |
| case AF_INET: |
| { |
| struct sockaddr_in *sockaddrin_ipv4; |
| struct rpcap_sockaddr_in *sockaddrout_ipv4; |
| |
| sockaddrin_ipv4 = (struct sockaddr_in *) sockaddrin; |
| sockaddrout_ipv4 = (struct rpcap_sockaddr_in *) sockaddrout; |
| sockaddrout_ipv4->family = htons(RPCAP_AF_INET); |
| sockaddrout_ipv4->port = htons(sockaddrin_ipv4->sin_port); |
| memcpy(&sockaddrout_ipv4->addr, &sockaddrin_ipv4->sin_addr, sizeof(sockaddrout_ipv4->addr)); |
| memset(sockaddrout_ipv4->zero, 0, sizeof(sockaddrout_ipv4->zero)); |
| break; |
| } |
| |
| #ifdef AF_INET6 |
| case AF_INET6: |
| { |
| struct sockaddr_in6 *sockaddrin_ipv6; |
| struct rpcap_sockaddr_in6 *sockaddrout_ipv6; |
| |
| sockaddrin_ipv6 = (struct sockaddr_in6 *) sockaddrin; |
| sockaddrout_ipv6 = (struct rpcap_sockaddr_in6 *) sockaddrout; |
| sockaddrout_ipv6->family = htons(RPCAP_AF_INET6); |
| sockaddrout_ipv6->port = htons(sockaddrin_ipv6->sin6_port); |
| sockaddrout_ipv6->flowinfo = htonl(sockaddrin_ipv6->sin6_flowinfo); |
| memcpy(&sockaddrout_ipv6->addr, &sockaddrin_ipv6->sin6_addr, sizeof(sockaddrout_ipv6->addr)); |
| sockaddrout_ipv6->scope_id = htonl(sockaddrin_ipv6->sin6_scope_id); |
| break; |
| } |
| #endif |
| } |
| } |
| |
| |
| /*! |
| \brief Suspends a thread for secs seconds. |
| */ |
| void sleep_secs(int secs) |
| { |
| #ifdef _WIN32 |
| Sleep(secs*1000); |
| #else |
| unsigned secs_remaining; |
| |
| if (secs <= 0) |
| return; |
| secs_remaining = secs; |
| while (secs_remaining != 0) |
| secs_remaining = sleep(secs_remaining); |
| #endif |
| } |
| |
| /* |
| * Read the header of a message. |
| */ |
| static int |
| rpcapd_recv_msg_header(SOCKET sock, struct rpcap_header *headerp) |
| { |
| int nread; |
| char errbuf[PCAP_ERRBUF_SIZE]; // buffer for network errors |
| |
| nread = sock_recv(sock, (char *) headerp, sizeof(struct rpcap_header), |
| SOCK_RECEIVEALL_YES|SOCK_EOF_ISNT_ERROR, errbuf, PCAP_ERRBUF_SIZE); |
| if (nread == -1) |
| { |
| // Network error. |
| rpcapd_log(LOGPRIO_ERROR, "Read from client failed: %s", errbuf); |
| return -1; |
| } |
| if (nread == 0) |
| { |
| // Immediate EOF; that's treated like a close message. |
| return -2; |
| } |
| headerp->plen = ntohl(headerp->plen); |
| return 0; |
| } |
| |
| /* |
| * Read data from a message. |
| * If we're trying to read more data that remains, puts an error |
| * message into errmsgbuf and returns -2. Otherwise, tries to read |
| * the data and, if that succeeds, subtracts the amount read from |
| * the number of bytes of data that remains. |
| * Returns 0 on success, logs a message and returns -1 on a network |
| * error. |
| */ |
| static int |
| rpcapd_recv(SOCKET sock, char *buffer, size_t toread, uint32 *plen, char *errmsgbuf) |
| { |
| int nread; |
| char errbuf[PCAP_ERRBUF_SIZE]; // buffer for network errors |
| |
| if (toread > *plen) |
| { |
| // Tell the client and continue. |
| pcap_snprintf(errmsgbuf, PCAP_ERRBUF_SIZE, "Message payload is too short"); |
| return -2; |
| } |
| nread = sock_recv(sock, buffer, toread, |
| SOCK_RECEIVEALL_YES|SOCK_EOF_IS_ERROR, errbuf, PCAP_ERRBUF_SIZE); |
| if (nread == -1) |
| { |
| rpcapd_log(LOGPRIO_ERROR, "Read from client failed: %s", errbuf); |
| return -1; |
| } |
| *plen -= nread; |
| return 0; |
| } |
| |
| /* |
| * Discard data from a connection. |
| * Mostly used to discard wrong-sized messages. |
| * Returns 0 on success, logs a message and returns -1 on a network |
| * error. |
| */ |
| static int |
| rpcapd_discard(SOCKET sock, uint32 len) |
| { |
| char errbuf[PCAP_ERRBUF_SIZE + 1]; // keeps the error string, prior to be printed |
| |
| if (len != 0) |
| { |
| if (sock_discard(sock, len, errbuf, PCAP_ERRBUF_SIZE) == -1) |
| { |
| // Network error. |
| rpcapd_log(LOGPRIO_ERROR, "Read from client failed: %s", errbuf); |
| return -1; |
| } |
| } |
| return 0; |
| } |