/*
 * Copyright (C) 2010 NXP Semiconductors
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/*
 * \file  phFriNfc_TopazMap.h
 * \brief NFC Ndef Mapping For Mifare UL Card.
 *
 * Project: NFC-FRI
 *
 * $Date: Mon Dec 13 14:14:14 2010 $
 * $Author: ing02260 $
 * $Revision: 1.26 $
 * $Aliases:  $
 *
 */

#ifndef PHFRINFC_TOPAZMAP_H
#define PHFRINFC_TOPAZMAP_H

#include <phFriNfc.h>
#ifdef PH_HAL4_ENABLE
#include <phHal4Nfc.h>
#else
#include <phHalNfc.h>
#endif
#include <phNfcStatus.h>
#include <phNfcTypes.h>
#include <phFriNfc_NdefMap.h>


#define PH_FRINFC_NDEFMAP_TOPAZMAP_FILEREVISION "$Revision: 1.26 $"
#define PH_FRINFC_NDEFMAP_TOPAZMAP_FILEALIASES  "$Aliases:  $"

#if !defined (ES_HW_VER)

    #define ES_HW_VER                                       (32U)

#endif /* #if !defined (ES_HW_VER) */

#if (ES_HW_VER >= 32)

    /* This macro is used for the new 3.2 chip,as the JEWEL_READ and 
        JEWEL_WRITE for this chip is removed from the firmware. And for the 
        new FW, only JEWEL_RAW shall be used */
    #define TOPAZ_RAW_SUPPORT

#endif /* #if (ES_HW_VER == 32) */

#define TOPAZ_UID_LENGTH_FOR_READ_WRITE                     0x04U

/*!
 * \name Topaz - states of the Finite State machine
 *
 */
/*@{*/
#define PH_FRINFC_TOPAZ_STATE_READ                        1   /*!< Read State */
#define PH_FRINFC_TOPAZ_STATE_WRITE                       2   /*!< Write is going on*/
#define PH_FRINFC_TOPAZ_STATE_CHK_NDEF                    3   /*!< Check Ndef is going on */
#define PH_FRINFC_TOPAZ_STATE_READID                      4   /*!< Read Id under progress */
#define PH_FRINFC_TOPAZ_STATE_READALL                     5   /*!< Read all under progress */
#define PH_FRINFC_TOPAZ_STATE_WRITE_NMN                   6   /*!< Write ndef magic number */
#define PH_FRINFC_TOPAZ_STATE_WRITE_L_TLV                 7   /*!< Write length field of TLV */
#define PH_FRINFC_TOPAZ_STATE_WR_CC_OR_TLV                8   /*!< Write CC or NDEF TLV */

#ifdef FRINFC_READONLY_NDEF

    #define PH_FRINFC_TOPAZ_STATE_WR_CC_BYTE               9   /*!< READ ONLY state */
    #define PH_FRINFC_TOPAZ_STATE_RD_LOCK0_BYTE           10  /*!< read Lock byte 0 state */
    #define PH_FRINFC_TOPAZ_STATE_WR_LOCK0_BYTE           11  /*!< write Lock byte 0 state */
    #define PH_FRINFC_TOPAZ_STATE_RD_LOCK1_BYTE           12  /*!< read Lock byte 1 state */
    #define PH_FRINFC_TOPAZ_STATE_WR_LOCK1_BYTE           13  /*!< write Lock byte 1 state */

#endif /* #ifdef FRINFC_READONLY_NDEF */
/*@}*/

/*!
 * \name Topaz - constants for the capability container
 *
 */
/*@{*/
#define PH_FRINFC_TOPAZ_CC_BYTE0                 0xE1 /*!< Capability container byte 0 = 0xE1 (NMN) */
#define PH_FRINFC_TOPAZ_CC_BYTE1                 0x10 /*!< Capability container byte 1 = 0x10 (version number) */
#define PH_FRINFC_TOPAZ_CC_BYTE2_MAX             0x0E /*!< Capability container byte 2 = 0x0E (Total free space 
                                                            in the card) */
#define PH_FRINFC_TOPAZ_CC_BYTE3_RW              0x00 /*!< Capability container byte 3 = 0x00 for 
                                                                  READ WRITE/INITIALISED card state */
#define PH_FRINFC_TOPAZ_CC_BYTE3_RO              0x0F /*!< Capability container byte 3 = 0x0F for 
                                                                  READ only card state */

/*@}*/

/*!
 * \name Topaz - constants for Flags
 *
 */
/*@{*/
#define PH_FRINFC_TOPAZ_FLAG0                    0 /*!< Flag value = 0 */
#define PH_FRINFC_TOPAZ_FLAG1                    1 /*!< Flag value = 1 */
/*@}*/

/*!
 * \name Topaz - constants for left shift
 *
 */
/*@{*/
#define PH_FRINFC_TOPAZ_SHIFT3                   3 /*!< Shift by 3 bits */
/*@}*/

/*!
 * \name Topaz - internal state for write
 *
 */
/*@{*/
enum
{
    PH_FRINFC_TOPAZ_WR_CC_BYTE0,                  /*!< CC Byte 0 = 0xE1 ndef magic number */
    PH_FRINFC_TOPAZ_WR_CC_BYTE1,                  /*!< CC Byte 1 = 0x10 version number */
    PH_FRINFC_TOPAZ_WR_CC_BYTE2,                  /*!< CC Byte 2 = 0x0C space in the data area */
    PH_FRINFC_TOPAZ_WR_CC_BYTE3,                  /*!< CC Byte 3 = 0x00 read write access */
    PH_FRINFC_TOPAZ_WR_T_OF_TLV,                  /*!< CC Byte 3 = 0x00 read write access */
    PH_FRINFC_TOPAZ_WR_NMN_0,                     /*!< NMN = 0x00 */
    PH_FRINFC_TOPAZ_WR_NMN_E1,                    /*!< NMN = 0xE1 */
    PH_FRINFC_TOPAZ_WR_L_TLV_0,                   /*!< L field of TLV = 0 */
    PH_FRINFC_TOPAZ_WR_L_TLV,                     /*!< To update the L field */
    PH_FRINFC_TOPAZ_DYNAMIC_INIT_CHK_NDEF,    /*!< Internal state to represent the  parsing of card to locate Ndef TLV*/
    PH_FRINFC_TOPAZ_DYNAMIC_INIT_FIND_NDEF_TLV
    
    
};
/*@}*/

/*!
 * \name Topaz - TLV related constants
 *
 */
/*@{*/
#define PH_FRINFC_TOPAZ_NULL_T                   0x00 /*!< Null TLV value = 0x00 */
#define PH_FRINFC_TOPAZ_LOCK_CTRL_T              0x01 /*!< Lock TLV = 0x01 */
#define PH_FRINFC_TOPAZ_MEM_CTRL_T               0x02 /*!< Memory TLV = 0x02 */
#define PH_FRINFC_TOPAZ_NDEF_T                   0x03 /*!< NDEF TLV = 0x03 */
#define PH_FRINFC_TOPAZ_PROP_T                   0xFD /*!< NDEF TLV = 0xFD */
#define PH_FRINFC_TOPAZ_TERM_T                   0xFE /*!< Terminator TLV value = 0xFE */

#define PH_FRINFC_TOPAZ_NDEFTLV_L                0x00 /*!< Length value of TLV = 0x00 */
#define PH_FRINFC_TOPAZ_NDEFTLV_LFF              0xFF /*!< Length value of TLV = 0xFF */
#define PH_FRINFC_TOPAZ_MAX_CARD_SZ              0x60 /*!< Send Length for Read Ndef */
/*@}*/


/*!
 * \name Topaz - Standard constants
 *
 */
/*@{*/
#define PH_FRINFC_TOPAZ_WR_A_BYTE                0x02 /*!< Send Length for Write Ndef */
#define PH_FRINFC_TOPAZ_SEND_BUF_READ            0x01 /*!< Send Length for Read Ndef */
#define PH_FRINFC_TOPAZ_HEADROM0_CHK             0xFF /*!< To check the header rom byte 0 */
#define PH_FRINFC_TOPAZ_HEADROM0_VAL             0x11 /*!< Header rom byte 0 value of static card */
#define PH_FRINFC_TOPAZ_READALL_RESP             0x7A /*!< Response of the read all command 122 bytes */
#define PH_FRINFC_TOPAZ_TOTAL_RWBYTES            0x60 /*!< Total number of raw Bytes that can 
                                                            be read or written to the card 96 bytes */
#define PH_FRINFC_TOPAZ_TOTAL_RWBYTES1           0x5A /*!< Total number of bytes that can be read 
                                                            or written 90 bytes */
#define PH_FRINFC_TOPAZ_BYTE3_MSB                0xF0 /*!< most significant nibble of byte 3(RWA) shall be 
                                                            0 */
#define PH_FRINFC_TOPAZ_LOCKBIT_BYTE114          0x01 /*!< lock bits value of byte 104 */
#define PH_FRINFC_TOPAZ_LOCKBIT_BYTE115_1        0x60 /*!< lock bits value of byte 105 */
#define PH_FRINFC_TOPAZ_LOCKBIT_BYTE115_2        0xE0 /*!< lock bits value of byte 105 */
#define PH_FRINFC_TOPAZ_LOCKBIT_BYTENO_0         114  /*!< lock bits byte number 104 */
#define PH_FRINFC_TOPAZ_LOCKBIT_BYTENO_1         115  /*!< lock bits byte number 105 */
#define PH_FRINFC_TOPAZ_CC_BYTENO_3              13   /*! Lock status according to CC bytes */
#define PH_FRINFC_TOPAZ_CC_READWRITE             0x00     /*! Lock status according to CC bytes */
#define PH_FRINFC_TOPAZ_CC_READONLY              0x0F     /*! Lock status according to CC bytes */

/**Topaz static commands*/
#define PH_FRINFC_TOPAZ_CMD_READID               0x78U
#define PH_FRINFC_TOPAZ_CMD_READALL              0x00U
#define PH_FRINFC_TOPAZ_CMD_READ                 0x01U
#define PH_FRINFC_TOPAZ_CMD_WRITE_1E             0x53U
#define PH_FRINFC_TOPAZ_CMD_WRITE_1NE            0x1AU

/**Topaz Dynamic commands*/
#define PH_FRINFC_TOPAZ_CMD_RSEG                 0x10U
#define PH_FRINFC_TOPAZ_CMD_READ8                0x02U
#define PH_FRINFC_TOPAZ_CMD_WRITE_E8             0x54U
#define PH_FRINFC_TOPAZ_CMD_WRITE_NE8            0x1BU

enum
{
    PH_FRINFC_TOPAZ_VAL0,
    PH_FRINFC_TOPAZ_VAL1,
    PH_FRINFC_TOPAZ_VAL2,
    PH_FRINFC_TOPAZ_VAL3,
    PH_FRINFC_TOPAZ_VAL4,
    PH_FRINFC_TOPAZ_VAL5, 
    PH_FRINFC_TOPAZ_VAL6,
    PH_FRINFC_TOPAZ_VAL7, 
    PH_FRINFC_TOPAZ_VAL8,
    PH_FRINFC_TOPAZ_VAL9,
    PH_FRINFC_TOPAZ_VAL10,
    PH_FRINFC_TOPAZ_VAL11,
    PH_FRINFC_TOPAZ_VAL12,
    PH_FRINFC_TOPAZ_VAL13,
    PH_FRINFC_TOPAZ_VAL14,
    PH_FRINFC_TOPAZ_VAL15,
    PH_FRINFC_TOPAZ_VAL16,
    PH_FRINFC_TOPAZ_VAL17,
    PH_FRINFC_TOPAZ_VAL18
};


/*@}*/

/*!
 * \brief \copydoc page_reg Resets the component instance to the initial state and lets the component forget about
 *        the list of registered items. Moreover, the lower device is set.
 *
 * \param[in] NdefMap Pointer to a valid or uninitialised instance of \ref phFriNfc_NdefMap_t .
 *
 * \note  This function has to be called at the beginning, after creating an instance of
 *        \ref phFriNfc_NdefMap_t . Use this function to reset the instance and/or switch
 *        to a different underlying device (different NFC device or device mode, or different
 *        Remote Device).
 */
void phFriNfc_TopazMap_H_Reset(  phFriNfc_NdefMap_t        *NdefMap);

#ifdef FRINFC_READONLY_NDEF

/*!
 * \ingroup grp_fri_smart_card_formatting
 *
 * \brief Initiates the conversion of the already NDEF formatted tag to READ ONLY.
 *
 * \copydoc page_ovr  The function initiates the conversion of the already NDEF formatted
 * tag to READ ONLY.After this formation, remote card would be properly Ndef Compliant and READ ONLY.
 * Depending upon the different card type, this function handles formatting procedure.
 * This function supports only for the TOPAZ tags.
 *
 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing
 *                    the component context.
 * \retval  NFCSTATUS_PENDING   The action has been successfully triggered.
 * \retval  Other values        An error has occurred.
 *
 */
NFCSTATUS 
phFriNfc_TopazMap_ConvertToReadOnly (
    phFriNfc_NdefMap_t          *NdefMap);

#endif /* #ifdef FRINFC_READONLY_NDEF */

/*!
 * \brief \copydoc page_ovr Initiates Reading of NDEF information from the Remote Device.
 *
 * The function initiates the reading of NDEF information from a Remote Device.
 * It performs a reset of the state and starts the action (state machine).
 * A periodic call of the \ref phFriNfc_NdefMap_Process has to be done once the action
 * has been triggered.
 *
 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing
 *                    the component context.
 *
 * \param[in] PacketData  Pointer to a location that receives the NDEF Packet.
 *
 * \param[in,out] PacketDataLength Pointer to a variable receiving the length of the NDEF packet.
 *
 * \param[in] Offset Indicates whether the read operation shall start from the begining of the
 *            file/card storage \b or continue from the last offset. The last Offset set is stored
 *            within a context variable (must not be modified by the integration).
 *            If the caller sets the value to \ref PH_FRINFC_NDEFMAP_SEEK_CUR, the component shall
 *            start reading from the last offset set (continue where it has stopped before).
 *            If set to \ref PH_FRINFC_NDEFMAP_SEEK_BEGIN, the component shall start reading
 *            from the begining of the card (restarted) 
 *
 * \retval NFCSTATUS_PENDING                       The action has been successfully triggered.
 * \retval NFCSTATUS_INVALID_DEVICE_REQUEST        If Previous Operation is Write Ndef and Offset
 *                                                 is Current then this error is displayed.
 * \retval NFCSTATUS_EOF_NDEF_CONTAINER_REACHED         No Space in the File to read.
 * \retval NFCSTATUS_MORE_INFORMATION              There are more bytes to read in the card.
 * \retval NFCSTATUS_SUCCESS                       Last Byte of the card read.
 * \retval NFCSTATUS_INVALID_DEVICE                The device has not been opened or has been disconnected
 *                                                 meanwhile.
 * \retval NFCSTATUS_CMD_ABORTED                   The caller/driver has aborted the request.
 * \retval NFCSTATUS_BUFFER_TOO_SMALL              The buffer provided by the caller is too small.
 * \retval NFCSTATUS_RF_TIMEOUT                    No data has been received within the TIMEOUT period.
 *
 */

NFCSTATUS phFriNfc_TopazMap_RdNdef( phFriNfc_NdefMap_t  *NdefMap,
                                    uint8_t             *PacketData,
                                    uint32_t            *PacketDataLength,
                                    uint8_t             Offset);


/*!
 * \brief \copydoc page_ovr Initiates Writing of NDEF information to the Remote Device.
 *
 * The function initiates the writing of NDEF information to a Remote Device.
 * It performs a reset of the state and starts the action (state machine).
 * A periodic call of the \ref phFriNfc_NdefMap_Process has to be done once the action
 * has been triggered.
 *
 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing
 *                    the component context.
 *
 * \param[in] PacketData  Pointer to a location that holds the prepared NDEF Packet.
 *
 * \param[in,out] PacketDataLength Variable specifying the length of the prepared NDEF packet.
 *
 * \param[in] Offset Indicates whether the write operation shall start from the begining of the
 *            file/card storage \b or continue from the last offset. The last Offset set is stored
 *            within a context variable (must not be modified by the integration).
 *            If the caller sets the value to \ref PH_FRINFC_NDEFMAP_SEEK_CUR, the component shall
 *            start writing from the last offset set (continue where it has stopped before).
 *            If set to \ref PH_FRINFC_NDEFMAP_SEEK_BEGIN, the component shall start writing
 *            from the begining of the card (restarted) 
 *
 * \retval NFCSTATUS_PENDING                        The action has been successfully triggered.
 * \retval NFCSTATUS_INVALID_DEVICE_REQUEST         If Previous Operation is Write Ndef and Offset
 *                                                  is Current then this error is displayed.
 * \retval NFCSTATUS_EOF_NDEF_CONTAINER_REACHED               Last byte is written to the card after this
 *                                                  no further writing is possible.
 * \retval NFCSTATUS_SUCCESS                        Buffer provided by the user is completely written
 *                                                  into the card.
 * \retval NFCSTATUS_INVALID_DEVICE                 The device has not been opened or has been disconnected
 *                                                  meanwhile.
 * \retval NFCSTATUS_CMD_ABORTED                    The caller/driver has aborted the request.
 * \retval NFCSTATUS_BUFFER_TOO_SMALL               The buffer provided by the caller is too small.
 * \retval NFCSTATUS_RF_TIMEOUT                     No data has been received within the TIMEOUT period.
 *
 */

NFCSTATUS phFriNfc_TopazMap_WrNdef( phFriNfc_NdefMap_t  *NdefMap,
                                    uint8_t             *PacketData,
                                    uint32_t            *PacketDataLength,
                                    uint8_t             Offset);

/*!
 * \brief \copydoc page_ovr Check whether a particulat Remote Device is NDEF compliant.
 *
 * The function checks whether the peer device is NDEF compliant.
 *
 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing
 *                    the component context.
 *
 * \retval NFCSTATUS_PENDING               The action has been successfully triggered.
 * \retval NFCSTATUS_INVALID_PARAMETER     At least one parameter of the function is invalid.
 * \retval NFCSTATUS_INVALID_DEVICE         The device has not been opened or has been disconnected
 *                                          meanwhile.
 * \retval NFCSTATUS_CMD_ABORTED            The caller/driver has aborted the request.
 * \retval NFCSTATUS_BUFFER_TOO_SMALL       The buffer provided by the caller is too small.
 * \retval NFCSTATUS_RF_TIMEOUT             No data has been received within the TIMEOUT period.
 *
 */

NFCSTATUS phFriNfc_TopazMap_ChkNdef(    phFriNfc_NdefMap_t  *NdefMap);

extern NFCSTATUS phFriNfc_Tpz_H_ChkSpcVer( phFriNfc_NdefMap_t  *NdefMap,
                                          uint8_t             VersionNo);


/*!
 * \brief \copydoc page_cb Completion Routine, Processing function, needed to avoid long blocking.
 *
 * The function call scheme is according to \ref grp_interact. No State reset is performed during operation.
 *
 * \copydoc pphFriNfc_Cr_t
 *
 * \note The lower (Overlapped HAL) layer must register a pointer to this function as a Completion
 *       Routine in order to be able to notify the component that an I/O has finished and data are
 *       ready to be processed.
 *
 */

void phFriNfc_TopazMap_Process( void        *Context,
                                NFCSTATUS   Status);


/*!
 * \name TopazDynamicMap - Following section describes constans, functions, variables used in
 *       Topaz Dyanmic card mapping. Ex : Topaz-512     
 *
 */
/*@{*/
/*!
 * \brief \copydoc Dynamic Card supported definitions.
 * \note State Mechine Delcations.
 */

#define PH_FRINFC_TOPAZ_DYNAMIC_STATE_WRITE_COMPLETE            11  /*!< Write Operation Complete */
#define PH_FRINFC_TOPAZ_DYNAMIC_STATE_NXP_READ                  12
#define PH_FRINFC_TOPAZ_DYNAMIC_STATE_RD_CCBLK                  13
#define PH_FRINFC_TOPAZ_DYNAMIC_STATE_INIT_RD_CCBLK             14
#define PH_FRINFC_TOPAZ_DYNAMIC_STATE_INIT_WR                   15
#define PH_FRINFC_TOPAZ_DYNAMIC_STATE_WRITE_LEN                 16
#define PH_FRINFC_TOPAZ_DYNAMIC_STATE_FIND_NDEF_TLV             17
#define PH_FRINFC_TOPAZ_DYNAMI_FOUND_RESERV_AREA                18
#define PH_FRINFC_TOPAZ_DYNAMIC_NOT_FOUND_RESERV_AREA           19
#define PH_FRINFC_TOPAZ_DYNAMIC_PROCESS_CHK_NDEF                20
#define PH_FRINFC_TOPAZ_DYNAMIC_FIND_NDEF_TLV                   21
#define PH_FRINFC_TOPAZ_DYNAMIC_INIT_RD_NDEF                    22
#define PH_FRINFC_TOPAZ_DYNAMIC_STATE_WR_MEM_TLV                23
#define PH_FRINFC_TOPAZ_DYNAMIC_STATE_WR_LOCK_TLV               24

/*!
 * \brief \copydoc Dynamic Card : Capability Container bytes.
 * \note State Mechine Delcations.
 */

#define PH_FRINFC_TOPAZ_DYNAMIC_CC_BYTE2_MMSIZE                 0x3F  /*!< Capability container byte 2 = 0x3F (Total free space 
                                                                        in the card) */
#define PH_FRINFC_TOPAZ_DYNAMIC_HEADROM0_VAL                    0x12  /*!< Header rom byte 0 value of dynamic card */                                 

#define PH_FRINFC_TOPAZ_DYNAMIC_TOTAL_RWBYTES                   0x1CC /*!< Total number of raw Bytes that can 
                                                                        be read or written to the card 460 bytes 
																		460 = 512 - 6 bloks * 8(48)( this includes 2 bytes of null byte in 02 block)
																		- 4 bytes ( NDEF TLV )*/
#define PH_FRINFC_TOPAZ_DYNAMIC_MAX_CARD_SZ                     0x1E0 /*!< Card size */
#define PH_FRINFC_TOPAZ_DYNAMIC_MX_ONEBYTE_TLV_SIZE             0xFF  /*!< MAX size supported in one byte length TLV*/
#define PH_FRINFC_TOPAZ_DYNAMIC_MAX_DATA_SIZE_TO_WRITE          0xE6  /*!< MAX size supported by HAL if the data size > 255*/

#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBYTE_0                      0x00 /*!< lock bits value of byte 104 */
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBYTE_1                      0x00 /*!< lock bits value of byte 105 */
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBYTE_2TO7                   0x00 /*!< lock bits value of byte 105 */

#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBIT_BYTENO_0                112  /*!< lock bits byte number 104:Blk0-7 */
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBIT_BYTENO_1                113  /*!< lock bits byte number 105:Blk08-F */
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBIT_BYTENO_2                122  /*!< lock bits byte number 124:Blk10-17 */
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBIT_BYTENO_3                123  /*!< lock bits byte number 125:Blk18-1F */
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBIT_BYTENO_4                124  /*!< lock bits byte number 126:Blk20-27*/
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBIT_BYTENO_5                125  /*!< lock bits byte number 127:Blk28-2F*/
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBIT_BYTENO_6                126  /*!< lock bits byte number 128:Blk30-37*/
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCKBIT_BYTENO_7                127  /*!< lock bits byte number 128:Blk30-37*/
#define PH_FRINFC_TOPAZ_DYNAMIC_CC_BYTENO_3                     11   /*! Lock status according to CC bytes */

#define PH_FRINFC_TOPAZ_DYNAMIC_SEGMENT0                        0x00  /*!< 00000000 : 0th segment */
#define PH_FRINFC_TOPAZ_DYNAMIC_READSEG_RESP                    0x80

#define PH_FRINFC_TOPAZ_DYNAMIC_MAX_BYTES_TO_READ_IN_ONEB_LTLV_FSEG             78
#define PH_FRINFC_TOPAZ_DYNAMIC_MAX_BYTES_TO_READ_IN_THREEB_LTLV_FSEG           76

#define PH_FRINFC_TOPAZ_DYNAMIC_MAX_DATA_SIZE                                   PHHAL_MAX_DATASIZE
#define PH_FRINFC_TOPAZ_DYNAMIC_FSEG_BYTE_COUNT                                 104 
#define PH_FRINFC_TOPAZ_DYNAMIC_SEG_BYTE_COUNT									128 
#define PH_FRINFC_TOPAZ_DYNAMIC_CC_BLK_SIZE                                     18   
#define PH_FRINFC_TOPAZ_DYNAMIC_CC_BLK_ADDRESS                                  8   
#define PH_FRINFC_TOPAZ_DYNAMIC_UID_BLK_ADDRESS                                 0   
#define PH_FRINFC_TOPAZ_DYNAMIC_LOCK_BYTE_SIZE                                  24  
#define PH_FRINFC_TOPAZ_DYNAMIC_FSEG_TOT_DATA_BYTES                             120 

#define PH_FRINFC_TOPAZ_DYNAMIC_DATA_BYTE_COUNT_OF_FSEG_IN_ONEB_LTLV_FSEG       26  
#define PH_FRINFC_TOPAZ_DYNAMIC_DATA_BYTE_COUNT_OF_FSEG_IN_THREEB_LTLV_FSEG     28  


enum
{
   
    NULL_TLV,
    LOCK_TLV,
    MEM_TLV,
    NDEF_TLV,
    PROP_TLV,
    TERM_TLV,
    INVALID_TLV,
    VALID_TLV,
    TLV_NOT_FOUND

};

/*!
 * \brief \copydoc page_ovr Initiates Reading of NDEF information from the Remote Device.
 *
 * The function initiates the reading of NDEF information from a Remote Device.
 * It performs a reset of the state and starts the action (state machine).
 * A periodic call of the \ref phFriNfc_NdefMap_Process has to be done once the action
 * has been triggered.
 *
 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing
 *                    the component context.
 *
 * \param[in] PacketData  Pointer to a location that receives the NDEF Packet.
 *
 * \param[in,out] PacketDataLength Pointer to a variable receiving the length of the NDEF packet.
 *
 * \param[in] Offset Indicates whether the read operation shall start from the begining of the
 *            file/card storage \b or continue from the last offset. The last Offset set is stored
 *            within a context variable (must not be modified by the integration).
 *            If the caller sets the value to \ref PH_FRINFC_NDEFMAP_SEEK_CUR, the component shall
 *            start reading from the last offset set (continue where it has stopped before).
 *            If set to \ref PH_FRINFC_NDEFMAP_SEEK_BEGIN, the component shall start reading
 *            from the begining of the card (restarted) 
 *
 * \retval NFCSTATUS_PENDING                       The action has been successfully triggered.
 * \retval NFCSTATUS_INVALID_DEVICE_REQUEST        If Previous Operation is Write Ndef and Offset
 *                                                 is Current then this error is displayed.
 * \retval NFCSTATUS_EOF_NDEF_CONTAINER_REACHED         No Space in the File to read.
 * \retval NFCSTATUS_MORE_INFORMATION              There are more bytes to read in the card.
 * \retval NFCSTATUS_SUCCESS                       Last Byte of the card read.
 * \retval NFCSTATUS_INVALID_DEVICE                The device has not been opened or has been disconnected
 *                                                 meanwhile.
 * \retval NFCSTATUS_CMD_ABORTED                   The caller/driver has aborted the request.
 * \retval NFCSTATUS_BUFFER_TOO_SMALL              The buffer provided by the caller is too small.
 * \retval NFCSTATUS_RF_TIMEOUT                    No data has been received within the TIMEOUT period.
 *
 */

NFCSTATUS phFriNfc_TopazDynamicMap_RdNdef( phFriNfc_NdefMap_t  *NdefMap,
                                    uint8_t             *PacketData,
                                    uint32_t            *PacketDataLength,
                                    uint8_t             Offset);

/*!
 * \brief \copydoc page_ovr Initiates Writing of NDEF information to the Remote Device.
 *
 * The function initiates the writing of NDEF information to a Remote Device.
 * It performs a reset of the state and starts the action (state machine).
 * A periodic call of the \ref phFriNfc_NdefMap_Process has to be done once the action
 * has been triggered.
 *
 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing
 *                    the component context.
 *
 * \param[in] PacketData  Pointer to a location that holds the prepared NDEF Packet.
 *
 * \param[in,out] PacketDataLength Variable specifying the length of the prepared NDEF packet.
 *
 * \param[in] Offset Indicates whether the write operation shall start from the begining of the
 *            file/card storage \b or continue from the last offset. The last Offset set is stored
 *            within a context variable (must not be modified by the integration).
 *            If the caller sets the value to \ref PH_FRINFC_NDEFMAP_SEEK_CUR, the component shall
 *            start writing from the last offset set (continue where it has stopped before).
 *            If set to \ref PH_FRINFC_NDEFMAP_SEEK_BEGIN, the component shall start writing
 *            from the begining of the card (restarted) 
 *
 * \retval NFCSTATUS_PENDING                        The action has been successfully triggered.
 * \retval NFCSTATUS_INVALID_DEVICE_REQUEST         If Previous Operation is Write Ndef and Offset
 *                                                  is Current then this error is displayed.
 * \retval NFCSTATUS_EOF_NDEF_CONTAINER_REACHED               Last byte is written to the card after this
 *                                                  no further writing is possible.
 * \retval NFCSTATUS_SUCCESS                        Buffer provided by the user is completely written
 *                                                  into the card.
 * \retval NFCSTATUS_INVALID_DEVICE                 The device has not been opened or has been disconnected
 *                                                  meanwhile.
 * \retval NFCSTATUS_CMD_ABORTED                    The caller/driver has aborted the request.
 * \retval NFCSTATUS_BUFFER_TOO_SMALL               The buffer provided by the caller is too small.
 * \retval NFCSTATUS_RF_TIMEOUT                     No data has been received within the TIMEOUT period.
 *
 */
NFCSTATUS phFriNfc_TopazDynamicMap_WrNdef( phFriNfc_NdefMap_t  *NdefMap,
                                    uint8_t             *PacketData,
                                    uint32_t            *PacketDataLength,
                                    uint8_t             Offset);

/*!
 * \brief \copydoc page_ovr Check whether a particulat Remote Device is NDEF compliant.
 *
 * The function checks whether the peer device is NDEF compliant.
 *
 * \param[in] NdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing
 *                    the component context.
 *
 * \retval NFCSTATUS_PENDING               The action has been successfully triggered.
 * \retval NFCSTATUS_INVALID_PARAMETER     At least one parameter of the function is invalid.
 * \retval NFCSTATUS_INVALID_DEVICE         The device has not been opened or has been disconnected
 *                                          meanwhile.
 * \retval NFCSTATUS_CMD_ABORTED            The caller/driver has aborted the request.
 * \retval NFCSTATUS_BUFFER_TOO_SMALL       The buffer provided by the caller is too small.
 * \retval NFCSTATUS_RF_TIMEOUT             No data has been received within the TIMEOUT period.
 *
 */
NFCSTATUS phFriNfc_TopazDynamicMap_ChkNdef(    phFriNfc_NdefMap_t  *NdefMap);

/*!
 * \brief \copydoc page_cb Completion Routine, Processing function, needed to avoid long blocking.
 *
 * The function call scheme is according to \ref grp_interact. No State reset is performed during operation.
 *
 * \copydoc pphFriNfc_Cr_t
 *
 * \note The lower (Overlapped HAL) layer must register a pointer to this function as a Completion
 *       Routine in order to be able to notify the component that an I/O has finished and data are
 *       ready to be processed.
 *
 */
void phFriNfc_TopazDynamicMap_Process( void        *Context,
                                NFCSTATUS   Status);

#ifdef FRINFC_READONLY_NDEF
/*!
 * \brief \copydoc page_ovr Initiates Writing of NDEF information to the Remote Device.
 *
 * The function initiates the writing of NDEF information to a Remote Device.
 * It performs a reset of the state and starts the action (state machine).
 * A periodic call of the \ref phFriNfc_NdefMap_Process has to be done once the action
 * has been triggered.
 *
 * \param[in] psNdefMap Pointer to a valid instance of the \ref phFriNfc_NdefMap_t structure describing
 *                    the component context.
 *
 *
 * \retval NFCSTATUS_PENDING                        The action has been successfully triggered.
 * \retval NFCSTATUS_INVALID_DEVICE_REQUEST         If Previous Operation is Write Ndef and Offset
 *                                                  is Current then this error is displayed.
 * \retval NFCSTATUS_EOF_NDEF_CONTAINER_REACHED               Last byte is written to the card after this
 *                                                  no further writing is possible.
 * \retval NFCSTATUS_SUCCESS                        Buffer provided by the user is completely written
 *                                                  into the card.
 * \retval NFCSTATUS_INVALID_DEVICE                 The device has not been opened or has been disconnected
 *                                                  meanwhile.
 * \retval NFCSTATUS_CMD_ABORTED                    The caller/driver has aborted the request.
 * \retval NFCSTATUS_BUFFER_TOO_SMALL               The buffer provided by the caller is too small.
 * \retval NFCSTATUS_RF_TIMEOUT                     No data has been received within the TIMEOUT period.
 *
 */
NFCSTATUS
phFriNfc_TopazDynamicMap_ConvertToReadOnly (
    phFriNfc_NdefMap_t     *psNdefMap);
#endif /* #ifdef FRINFC_READONLY_NDEF */

   
#endif /* PHFRINFC_TOPAZMAP_H */