blob: 5b0837db38f114099aed564431c3588474634481 [file] [log] [blame]
/******************************************************************************
*
* Copyright (C) 2012 Ittiam Systems Pvt Ltd, Bangalore
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/**
*******************************************************************************
* @file
* ihevcd_structs.h
*
* @brief
* Structure definitions used in the decoder
*
* @author
* Harish
*
* @par List of Functions:
*
* @remarks
* None
*
*******************************************************************************
*/
#ifndef _IHEVCD_STRUCTS_H_
#define _IHEVCD_STRUCTS_H_
typedef enum
{
INIT_DONE, HEADER_DONE, FIRST_FRAME_DONE,
}CODEC_STATE_T;
typedef struct _codec_t codec_t;
/** Structure to hold format conversion context */
typedef struct
{
/** Current row for which format conversion should be done */
WORD32 i4_cur_row;
/** Number of rows for which format conversion should be done */
WORD32 i4_num_rows;
}fmt_conv_t;
/**
* Bitstream structure
*/
typedef struct
{
/**
* Bitstream buffer base pointer
*/
UWORD8 *pu1_buf_base;
/**
* Bitstream bit offset in current word. Value between 0 and 31
*/
UWORD32 u4_bit_ofst;
/**
* Current bitstream buffer pointer
*/
UWORD32 *pu4_buf;
/**
* Current word
*/
UWORD32 u4_cur_word;
/**
* Next word
*/
UWORD32 u4_nxt_word;
/**
* Max address for bitstream
*/
UWORD8 *pu1_buf_max;
}bitstrm_t;
/**
******************************************************************************
* @brief Cabac context for decoder
******************************************************************************
*/
typedef struct cab_ctxt
{
/*********************************************************************/
/* CABAC ENGINE related fields */
/*********************************************************************/
/** cabac interval range R */
UWORD32 u4_range;
/** cabac interval offset O */
UWORD32 u4_ofst;
/*********************************************************************/
/* CABAC context models */
/*********************************************************************/
/** All Context models stored in pscked form pState[bits6-1] | MPS[bit0] */
UWORD8 au1_ctxt_models[IHEVC_CAB_CTXT_END];
/** Context models memorized after decoding 2nd CTB in a row to be used
* during entropy sync cases
*/
UWORD8 au1_ctxt_models_sync[IHEVC_CAB_CTXT_END];
}cab_ctxt_t;
typedef enum
{
CMD_PROCESS,
CMD_FMTCONV,
}JOBQ_CMD_T;
/**
* Structure to represent a processing job entry
*/
typedef struct
{
/**
* Command
* Currently: PROCESS, FMTCONV are the only two jobs
*/
WORD32 i4_cmd;
/**
* CTB x of the starting CTB
*/
WORD16 i2_ctb_x;
/**
* CTB y of the starting CTB
*/
WORD16 i2_ctb_y;
/**
* Number of CTBs that need to be processed in this job
*/
WORD16 i2_ctb_cnt;
/**
* Slice index for the current CTB
*/
WORD16 i2_slice_idx;
/**
* TU coefficient data offset for the current job
*/
WORD32 i4_tu_coeff_data_ofst;
}proc_job_t;
/**
* Structure to represent a MV Bank buffer
*/
typedef struct
{
/**
* Pointer to hold PU index for each CTB in a picture
*/
UWORD32 *pu4_pic_pu_idx;
/**
* Pointer to hold pu_t for each PU in a picture
*/
pu_t *ps_pic_pu;
/**
* Pointer to hold PU map for each CTB in a picture
*/
UWORD8 *pu1_pic_pu_map;
/**
* Pointer to hold the Slice map
*/
UWORD16 *pu1_pic_slice_map;
/**
* Absolute POC for the current MV Bank
*/
WORD32 i4_abs_poc;
/**
* Absolute POCs of reference List 0 for all slices in the frame from which this frame is reconstructed
*/
WORD32 ai4_l0_collocated_poc[MAX_SLICE_HDR_CNT][MAX_DPB_SIZE];
/**
* Flag to indicate Long Term reference for POCs of reference List 0 for all slices in the frame from which this frame is reconstructed
*/
WORD8 ai1_l0_collocated_poc_lt[MAX_SLICE_HDR_CNT][MAX_DPB_SIZE];
/**
* Absolute POCs of reference List 1 for all slices in the frame from which this frame is reconstructed
*/
WORD32 ai4_l1_collocated_poc[MAX_SLICE_HDR_CNT][MAX_DPB_SIZE];
/**
* Flag to indicate Long Term reference for POCs of reference List 1 for all slices in the frame from which this frame is reconstructed
*/
WORD8 ai1_l1_collocated_poc_lt[MAX_SLICE_HDR_CNT][MAX_DPB_SIZE];
}mv_buf_t;
typedef struct
{
/**
* Pointer to current PPS
*/
pps_t *ps_pps;
/**
* Pointer to current SPS
*/
sps_t *ps_sps;
/**
* Pointer to current slice header structure
*/
slice_header_t *ps_slice_hdr;
/**
* CTB's x position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_x;
/**
* CTB's y position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_y;
/**
* Current PU structure - set to CTB pu_t pointer at the start of CTB processing and incremented
* for every TU
*/
pu_t *ps_pu;
/**
* Pointer to frame level pu_t for the current frame being parsed
* where MVs and Intra pred modes will be updated
*/
pu_t *ps_pic_pu;
/**
* Store the current tile's information. This is needed for the computation of mvs.
*/
tile_t *ps_tile;
/**
* Points to an array of PU indices which is used to identify
* start index of pu_t in ps_pic_pu and also to identify number of
* PUs in the current CTB by subtracting current idx from next CTB's
* PU idx
*/
UWORD32 *pu4_pic_pu_idx;
/** PU Index map per CTB. The indices in this map are w.r.t picture pu array and not
* w.r.t CTB pu array.
* This will be used during mv prediction and since neighbours will have different CTB pu map
* it will be easier if they all have indices w.r.t picture level PU array rather than CTB level
* PU array.
* pu1_pic_pu_map is map w.r.t CTB's pu_t array
*/
UWORD32 *pu4_pic_pu_idx_map;
/**
* Pointer to pu_map for the current frame being parsed
* where MVs and Intra pred modes will be updated
*/
UWORD8 *pu1_pic_pu_map;
/**
* PU count in current CTB
*/
WORD32 i4_ctb_pu_cnt;
/**
* PU count in current CTB
*/
WORD32 i4_ctb_start_pu_idx;
/**
* Top availability for current CTB level
*/
UWORD8 u1_top_ctb_avail;
/**
* Top right availability for current CTB level
*/
UWORD8 u1_top_rt_ctb_avail;
/**
* Top left availability for current CTB level
*/
UWORD8 u1_top_lt_ctb_avail;
/**
* left availability for current CTB level
*/
UWORD8 u1_left_ctb_avail;
}mv_ctxt_t;
typedef struct
{
/**
* Pointer to current PPS
*/
pps_t *ps_pps;
/**
* Pointer to current SPS
*/
sps_t *ps_sps;
/*
* Pointer to codec context
*/
codec_t *ps_codec;
/**
* Index of the current Tile being parsed
*/
tile_t *ps_tile;
/**
* Pointer to the current slice header
*/
slice_header_t *ps_slice_hdr;
/**
* TU count in current CTB
*/
WORD32 i4_ctb_tu_cnt;
/**
* CTB's x position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_x;
/**
* CTB's y position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_y;
/**
* CTB's x position within a Tile in raster scan in CTB units
*/
WORD32 i4_ctb_tile_x;
/**
* CTB's y position within a Tile in raster scan in CTB units
*/
WORD32 i4_ctb_tile_y;
/**
* CTB's x position within a Slice in raster scan in CTB units
*/
WORD32 i4_ctb_slice_x;
/**
* CTB's y position within a Slice in raster scan in CTB units
*/
WORD32 i4_ctb_slice_y;
/* Two bits per edge.
Stored in format. BS[15] | BS[14] | .. |BS[0]*/
UWORD32 *pu4_pic_vert_bs;
/**
* Horizontal Boundary strength
*/
/* Two bits per edge.
Stored in format. BS[15] | BS[14] | .. |BS[0]*/
UWORD32 *pu4_pic_horz_bs;
/**
* Flags to indicate if QP is constant through out a CTB - 1 bit for each CTB
* The bits are packed from LSB to MSB
* To get the flag corresponding to CTB with (ctb_x, ctb_y), use
* pu4_qp_const_in_ctb[(ctb_x + pic_wd_in_ctb * ctb_y) >> 3] & (1 << ((ctb_x + pic_wd_in_ctb * ctb_y) & 7))
*/
UWORD8 *pu1_pic_qp_const_in_ctb;
/**
* Qp array stored for each 8x8 pixels
*/
UWORD8 *pu1_pic_qp;
/**
* Current TU structure - set to CTB tu_t pointer at the start of CTB processing and incremented
* for every TU
*/
tu_t *ps_tu;
/**
* Points to an array of TU indices which is used to identify
* start index of tu_t in ps_pic_tu and also to identify number of
* TUs in the current CTB by subtracting current idx from next CTB's
* TU idx
*/
UWORD32 *pu4_pic_tu_idx;
/**
* Points to an array of PU indices which is used to identify
* start index of pu_t in ps_pic_pu and also to identify number of
* PUs in the current CTB by subtracting current idx from next CTB's
* PU idx
*/
UWORD32 *pu4_pic_pu_idx;
/**
* Current PU structure - set to CTB pu_t pointer at the start of CTB processing and incremented
* for every TU
*/
pu_t *ps_pu;
/**
* Pointer to frame level pu_t for the current frame being parsed
* where MVs and Intra pred modes will be updated
*/
pu_t *ps_pic_pu;
/** PU Index map per CTB. The indices in this map are w.r.t picture pu array and not
* w.r.t CTB pu array.
* This will be used during mv prediction and since neighbours will have different CTB pu map
* it will be easier if they all have indices w.r.t picture level PU array rather than CTB level
* PU array.
* pu1_pic_pu_map is map w.r.t CTB's pu_t array
*/
UWORD32 *pu4_pic_pu_idx_map;
/**
* Variable to store the next ctb count to compute pu idx
*/
WORD32 i4_next_pu_ctb_cnt;
/**
* Variable to store the next ctb count to compute tu idx
*/
WORD32 i4_next_tu_ctb_cnt;
/**
* Points to the array of slice indices which is used to identify the slice
* to which each CTB in a frame belongs.
*/
UWORD16 *pu1_slice_idx;
}bs_ctxt_t;
typedef struct
{
/**
* Pointer to current PPS
*/
pps_t *ps_pps;
/**
* Pointer to current SPS
*/
sps_t *ps_sps;
/*
* Pointer to codec context
*/
codec_t *ps_codec;
/**
* Pointer to current slice header structure
*/
slice_header_t *ps_slice_hdr;
/**
* Pointer to the structure that contains BS and QP frame level arrays
*/
bs_ctxt_t s_bs_ctxt;
/**
* CTB's x position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_x;
/**
* CTB's y position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_y;
/**
* Current pictures loop filter flag map at 8x8 level
*/
UWORD8 *pu1_pic_no_loop_filter_flag;
/**
* Current CTB's no_loop_filter_flags
* each element corresponds to one row - including the left CTB's last 8x8
*/
UWORD16 au2_ctb_no_loop_filter_flag[9];
/*
* Pointer to 0th luma pixel in current pic
*/
UWORD8 *pu1_cur_pic_luma;
/*
* Pointer to 0th chroma pixel in current pic
*/
UWORD8 *pu1_cur_pic_chroma;
/* Points to the array of slice indices which is used to identify the slice
* to which each CTB in a frame belongs.
*/
UWORD16 *pu1_slice_idx;
/* Specifies if the chroma format is yuv420sp_vu */
WORD32 is_chroma_yuv420sp_vu;
}deblk_ctxt_t;
typedef struct
{
/**
* Pointer to current PPS
*/
pps_t *ps_pps;
/**
* Pointer to current SPS
*/
sps_t *ps_sps;
/* Pointer to codec context
*
*/
codec_t *ps_codec;
/**
* Pointer to base slice header structure
*/
slice_header_t *ps_slice_hdr_base;
/**
* Pointer to current slice header structure
*/
slice_header_t *ps_slice_hdr;
/**
* Pointer to current tile structure
*/
tile_t *ps_tile;
/**
* CTB's x position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_x;
/**
* CTB's y position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_y;
/**
* Current pictures loop filter flag map at 8x8 level
*/
UWORD8 *pu1_pic_no_loop_filter_flag;
/*
* Pointer to 0th luma pixel in current pic
*/
UWORD8 *pu1_cur_pic_luma;
/*
* Pointer to 0th chroma pixel in current pic
*/
UWORD8 *pu1_cur_pic_chroma;
/**
* Pointer to frame level sao_t for the current frame being parsed
*/
sao_t *ps_pic_sao;
/**
* Temporary buffer needed during SAO processing
*/
UWORD8 *pu1_tmp_buf_luma;
/**
* Temporary buffer needed during SAO processing
*/
UWORD8 *pu1_tmp_buf_chroma;
/**
* Left column of luma pixels - used by SAO
*/
UWORD8 *pu1_sao_src_left_luma;
/**
* Top row of luma pixels - used by SAO
*/
UWORD8 *pu1_sao_src_top_luma;
/**
* Left column of chroma pixels(interleaved) - used by SAO
*/
UWORD8 *pu1_sao_src_left_chroma;
/**
* Top row of chroma pixels(interleaved) - used by SAO
*/
UWORD8 *pu1_sao_src_top_chroma;
/**
* Top-left luma pixel - used by SAO (for the top CTB row)
*/
UWORD8 *pu1_sao_src_luma_top_left_ctb;
/**
* Top-left chroma pixel(interleaved) - used by SAO (for the top CTB row)
*/
UWORD8 *pu1_sao_src_chroma_top_left_ctb;
/**
* Top-left luma pixel - used by SAO (for the current CTB row)
*/
UWORD8 *pu1_sao_src_top_left_luma_curr_ctb;
/**
* Top-left chroma pixel(interleaved) - used by SAO (for the current CTB row)
*/
UWORD8 *pu1_sao_src_top_left_chroma_curr_ctb;
/**
* Top-right luma pixel - used by SAO (for the top CTB row)
*/
UWORD8 *pu1_sao_src_top_left_luma_top_right;
/**
* Top-right chroma pixel(interleaved) - used by SAO (for the top CTB row)
*/
UWORD8 *pu1_sao_src_top_left_chroma_top_right;
/**
* Bottom-left luma pixel - used by SAO
*/
UWORD8 u1_sao_src_top_left_luma_bot_left;
/**
* Pointer to array that stores bottom left luma pixel per row(interleaved) - used by SAO
*/
UWORD8 *pu1_sao_src_top_left_luma_bot_left;
/**
* Bottom left chroma pixel(interleaved) - used by SAO
*/
UWORD8 au1_sao_src_top_left_chroma_bot_left[2];
/**
* Pointer to array that stores bottom left chroma pixel per row(interleaved) - used by SAO
*/
UWORD8 *pu1_sao_src_top_left_chroma_bot_left;
/*
* Slice counter in a picture.
*/
UWORD32 i4_cur_slice_idx;
/**
* Points to the array of slice indices which is used to identify the slice
* to which each CTB in a frame belongs.
*/
UWORD16 *pu1_slice_idx;
/**
* Points to the array of tile indices which is used to identify the slice
* to which each CTB in a frame belongs.
*/
UWORD16 *pu1_tile_idx;
/* Specifies if the chroma format is yuv420sp_vu */
WORD32 is_chroma_yuv420sp_vu;
}sao_ctxt_t;
typedef struct
{
/** Log2 CU's size */
WORD32 i4_log2_cb_size;
/** CU's x position */
WORD32 i4_pos_x;
/** CU's y position */
WORD32 i4_pos_y;
/**
* Transquant Bypass enable flag at CU level - To be replicated at TU level
*/
WORD32 i4_cu_transquant_bypass;
/**
* Prediction mode
*/
WORD32 i4_pred_mode;
/**
* Partition mode
*/
WORD32 i4_part_mode;
/**
* Intra luma pred mode for current CU. In case of PART2Nx2N
* the first value is replicated to avoid checks later
*/
WORD32 ai4_intra_luma_pred_mode[4];
/**
* Previous intra luma pred flag used for intra pred mode computation
*/
WORD32 ai4_prev_intra_luma_pred_flag[4];
/**
* mpm index used in intra prediction mode computation
*/
WORD32 ai4_mpm_idx[4];
/**
* Remaining intra pred mode
*/
WORD32 ai4_rem_intra_luma_pred_mode[4];
/**
* Chroma pred mode index to be used to compute intra pred mode for chroma
*/
WORD32 i4_intra_chroma_pred_mode_idx;
/**
* Maximum transform depth
*/
WORD32 i4_max_trafo_depth;
/**
* Luma CBF for current TU
*/
UWORD8 i1_cbf_luma;
/**
* Cb CBF
*/
UWORD8 ai1_cbf_cb[MAX_TRAFO_DEPTH];
/**
* Cr CBF
*/
UWORD8 ai1_cbf_cr[MAX_TRAFO_DEPTH];
/**
* Intra split flag
*/
WORD32 i4_intra_split_flag;
/**
* Current QP
*/
WORD32 i4_qp;
/**
* Number of TUs in CU parsed before a change in QP is signaled
*/
WORD32 i4_tu_cnt;
/**
* Cu QP delta
*/
WORD32 i4_cu_qp_delta;
}parse_cu_t;
/**
* Structure contains few common state variables such as CTB positions, current SPS, PPS ids etc which are to be
* used in the parsing thread. By keeping it a different structure it is being explicitly signalled that these
* variables are specific to Parsing threads context and other threads should not update these elements
*/
typedef struct
{
/**
* CTB's x position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_x;
/**
* CTB's y position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_y;
/**
* CTB's x position within a Tile in raster scan in CTB units
*/
WORD32 i4_ctb_tile_x;
/**
* CTB's y position within a Tile in raster scan in CTB units
*/
WORD32 i4_ctb_tile_y;
/**
* CTB's x position within a Slice in raster scan in CTB units
*/
WORD32 i4_ctb_slice_x;
/**
* CTB's y position within a Slice in raster scan in CTB units
*/
WORD32 i4_ctb_slice_y;
/**
* Index of the current Tile being parsed
*/
tile_t *ps_tile;
/**
* Current slice idx - Used in multi-core cases to ensure slice header is
* preserved till the last CB of the slice is decoded
*/
WORD32 i4_cur_slice_idx;
/**
* Current slice idx - Used in multi-core cases to ensure slice header is
* preserved till the last CB of the slice is decoded
*/
WORD32 i4_cur_independent_slice_idx;
/**
* Current slice idx - Used in multi-core cases to ensure slice header is
* preserved till the last CB of the slice is decoded
*/
WORD32 i4_cur_tile_idx;
/**
* Pointer to current PPS
*/
pps_t *ps_pps;
/**
* Pointer to current SPS
*/
sps_t *ps_sps;
/**
* Signal that pic_init is called first time
*/
WORD32 i4_first_pic_init;
/**
* Flag to indicate if CU QP delta is coded.
* By default it is set to 0 at the beginning of coding quad tree
*/
WORD32 i4_is_cu_qp_delta_coded;
/**
* CU Qp delta
* By default it is set to 0 at the beginning of coding quad tree
*/
WORD32 i4_cu_qp_delta;
/**
* Bitstream structure
*/
bitstrm_t s_bitstrm;
/**
* Pointer frame level TU subblock coeff data
*/
void *pv_pic_tu_coeff_data;
/**
* Pointer to TU subblock coeff data and number of coded subblocks and scan idx
* Incremented each time a coded subblock is parsed
*
*/
void *pv_tu_coeff_data;
/**
* Current TU structure - set to CTB tu_t pointer at the start of CTB parsing and incremented
* for every TU
*/
tu_t *ps_tu;
/**
* Current ctb's TU map
*/
UWORD8 *pu1_tu_map;
/**
* Current PU structure - set to CTB pu_t pointer at the start of CTB parsing and incremented
* for every TU
*/
pu_t *ps_pu;
/**
* Points to the array of slice indices which is used to identify the independent slice
* to which each CTB in a frame belongs.
*/
UWORD16 *pu1_slice_idx;
/**
* Current PU index in a frame
*/
WORD32 i4_pic_pu_idx;
/**
* Current TU index in a frame
*/
WORD32 i4_pic_tu_idx;
/**
* Current PU structure - set to CTB pu_map pointer at the start of CTB parsing
*/
UWORD8 *pu1_pu_map;
/**
* Current QP
*/
WORD32 u4_qp;
/**
* Current Group's QP
*/
WORD32 u4_qpg;
/**
* Number of PCM blocks in current CTB - Needed only during parsing
* If needed during recon then move it to ctb_t
*/
WORD32 i4_ctb_num_pcm_blks;
/**
* PCM flag for the current CU
*/
WORD32 i4_cu_pcm_flag;
/**
* CU related information to be used to populate tu_t and pu_t during
* pred unit and transform tree parsing.
*/
parse_cu_t s_cu;
/**
* Pointer to pu_map for the current frame being parsed
*/
UWORD8 *pu1_pic_pu_map;
/**
* Pointer to frame level pu_t for the current frame being parsed
* where MVs and Intra pred modes will be updated
*/
pu_t *ps_pic_pu;
/**
* Pointer to tu_map for the current frame being parsed
*/
UWORD8 *pu1_pic_tu_map;
/**
* Pointer to frame level tu_t for the current frame being parsed
* where transform unit related info will be updated
*/
tu_t *ps_pic_tu;
/**
* Points to an array of TU indices which is used to identify
* start index of tu_t in ps_pic_tu and also to identify number of
* TUs in the current CTB by subtracting current idx from next CTB's
* TU idx
*/
UWORD32 *pu4_pic_tu_idx;
/**
* Points to an array of PU indices which is used to identify
* start index of pu_t in ps_pic_pu and also to identify number of
* PUs in the current CTB by subtracting current idx from next CTB's
* PU idx
*/
UWORD32 *pu4_pic_pu_idx;
/**
* Current pictures intra mode map at 8x8 level
*/
UWORD8 *pu1_pic_intra_flag;
/**
* Current pictures loop filter flag map at 8x8 level
*/
UWORD8 *pu1_pic_no_loop_filter_flag;
/**
* Array to hold one row (top) of skip_flag flag stored at (8x8) level
* 1 bit per (8x8)
* read and written as a UWORD32
* LSB gives skip_flag for 0th 8x8 and MSB gives skip_flag for 31st 8x8 and so on
* This is independent of CTB size or minCU size
* Packed format requires extra calculations in extracting required bits but makes it easier
* to store skip data for larger sizes such as 32 x 32 where 4 bits need to be set instead of
* 4 bytes or for 64 x 64 where 8 bits need to be set instead of 8 bytes.
*/
UWORD32 *pu4_skip_cu_top;
/**
* Array to hold one 64 pixel column (left) of skip_flag flag stored at (8x8) level
* 1 bit per (8x8)
* read and written as a UWORD32
* LSB gives skip_flag for 0th 8x8 and MSB gives skip for 31st 8x8 and so on
* This is independent of CTB size and allocated to store data for 64 pixels, of
* this only first ctb_size number of bits (starting from MSB) will have valid data
* This is also independent of min CU size and data is stored at 8x8 level.
* Since only 8 bits are needed to represent left 64 pixels at 8x8 level, this is not an array
*/
UWORD32 u4_skip_cu_left;
/**
* Array to hold one row (top) of coding_tree_depth stored at (8x8) level
* 2 bits per (8x8) pixels
* read and written as a WORD32
* 2 LSBits give coding_tree_depth for 0th 8x8 and 2 MSBits give coding_tree_depth for 15th 8x8 and so on
* This is independent of CTB size or minCU size
*/
UWORD32 *pu4_ct_depth_top;
/**
* Array to hold one 64 pixel column (left) of coding_tree_depth stored at (8x8) level
* 2 bits per (8x8) pixels
* read and written as a WORD32
* 2 LSBits give coding_tree_depth for 0th 8x8 and 2 MSBits give coding_tree_depth for 15th 8x8 and so on
* This is independent of CTB size and allocated to store data for 64 pixels, of
* this only first ctb_size * 2 number of bits (starting from MSB) will have valid data
* This is also independent of min CU size and data is stored at 8x8 level.
* Since only 16 bits are needed to represent left 64 pixels at 8x8 level, this is not an array
*/
UWORD32 u4_ct_depth_left;
/**
* Array to hold top (one row) luma_intra_pred_mode stored at (4x4) level for a CTB
* 8 bits per (4x4) pixels
* read and written as a UWORD8
* This is independent of CTB size or minCU size
* This is independent of CTB size and allocated to store data for 64 pixels i.e. 64 bits is the size
* Note this data is used only within a CTB, There is no inter CTB dependencies for this
*/
UWORD8 *pu1_luma_intra_pred_mode_top;
/**
* Array to hold left (one column) luma_intra_pred_mode stored at (4x4) level for a CTB
* 8 bits per (4x4) pixels
* read and written as a UWORD8
* This is independent of CTB size and allocated to store data for 64 pixels i.e. 64 bits is the size
* This is also independent of min CU size and data is stored at 8x8 level.
* This is used for prediction of next CTB within a row in a slice or tile
*/
UWORD8 *pu1_luma_intra_pred_mode_left;
/**
* Pointer to base of Video parameter set structure array
*/
vps_t *ps_vps_base;
/**
* Pointer to base of Sequence parameter set structure array
*/
sps_t *ps_sps_base;
/**
* Pointer to base of Picture parameter set structure array
*/
pps_t *ps_pps_base;
/**
* Pointer to base of slice header structure array
*/
slice_header_t *ps_slice_hdr_base;
/**
* Pointer to current slice header structure
*/
slice_header_t *ps_slice_hdr;
/**
* Error code during parse stage
*/
WORD32 i4_error_code;
/**
* Void pointer to process job context
*/
void *pv_proc_jobq;
/* Cabac context */
cab_ctxt_t s_cabac;
/* Current Coding tree depth */
WORD32 i4_ct_depth;
/** Flag to signal end of frame */
WORD32 i4_end_of_frame;
/**
* Index of the next CTB parsed
*/
WORD32 i4_next_ctb_indx;
/**
* Pointer to the structure that contains BS and QP frame level arrays
*/
bs_ctxt_t s_bs_ctxt;
/**
* Pointer to the structure that contains deblock context
*/
deblk_ctxt_t s_deblk_ctxt;
/**
* Pointer to the structure that contains sao context
*/
sao_ctxt_t s_sao_ctxt;
/**
* QP Array for the current CTB
* Used in QP prediction
*/
WORD8 ai1_8x8_cu_qp[MAX_CU_IN_CTB];
/**
* Pointer to frame level sao_t for the current frame being parsed
*/
sao_t *ps_pic_sao;
/**
* Abs POC count of the frame
*/
WORD32 i4_abs_pic_order_cnt;
/**
* Pointer points to mv_buffer of current frame
*/
mv_buf_t *ps_cur_mv_buf;
/**
* Variable to store the next ctb count to compute pu idx
*/
WORD32 i4_next_pu_ctb_cnt;
/**
* Variable to store the next ctb count to compute tu idx
*/
WORD32 i4_next_tu_ctb_cnt;
/**
* SEI parameters
*/
sei_params_t s_sei_params;
}parse_ctxt_t;
/**
* Pixel processing thread context
*/
typedef struct
{
/* Pointer to codec context
*
*/
codec_t *ps_codec;
/**
* CTB's x position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_x;
/**
* CTB's y position within a picture in raster scan in CTB units
*/
WORD32 i4_ctb_y;
/**
* CTB's x position within a Tile in raster scan in CTB units
*/
WORD32 i4_ctb_tile_x;
/**
* CTB's y position within a Tile in raster scan in CTB units
*/
WORD32 i4_ctb_tile_y;
/**
* CTB's x position within a Slice in raster scan in CTB units
*/
WORD32 i4_ctb_slice_x;
/**
* CTB's y position within a Slice in raster scan in CTB units
*/
WORD32 i4_ctb_slice_y;
/**
* Current tile being processed
*/
tile_t *ps_tile;
/**
* Current slice idx - Used in multi-core cases to store slice index for
* each ctb for sao filtering.
*/
WORD32 i4_cur_slice_idx;
/**
* Current tile idx - Used in multi-core cases to store tile index for
* each ctb for sao filtering.
*/
WORD32 i4_cur_tile_idx;
/**
* Pointer to current PPS
*/
pps_t *ps_pps;
/**
* Pointer to current SPS
*/
sps_t *ps_sps;
/**
* Pointer to current slice header structure
*/
slice_header_t *ps_slice_hdr;
/**
* Error code during parse stage
*/
WORD32 i4_error_code;
/**
* Signal that pic_init is called first time
*/
WORD32 i4_first_pic_init;
/**
* Pointer frame level TU subblock coeff data
*/
void *pv_pic_tu_coeff_data;
/**
* Pointer to TU subblock coeff data and number of subblocks and scan idx
* Incremented each time a coded subblock is processed
*
*/
void *pv_tu_coeff_data;
/**
* Current TU structure - set to CTB tu_t pointer at the start of CTB processing and incremented
* for every TU
*/
tu_t *ps_tu;
/**
* Current ctb's TU map
*/
UWORD8 *pu1_tu_map;
/**
* Current PU structure - set to CTB pu_t pointer at the start of CTB processing and incremented
* for every TU
*/
pu_t *ps_pu;
/**
* Points to an array of TU indices which is used to identify
* start index of tu_t in ps_pic_tu and also to identify number of
* TUs in the current CTB by subtracting current idx from next CTB's
* TU idx
*/
UWORD32 *pu4_pic_tu_idx;
/**
* Points to an array of PU indices which is used to identify
* start index of pu_t in ps_pic_pu and also to identify number of
* PUs in the current CTB by subtracting current idx from next CTB's
* PU idx
*/
UWORD32 *pu4_pic_pu_idx;
/**
* Pointer to tu_map for the current frame being parsed
*/
UWORD8 *pu1_pic_tu_map;
/**
* Pointer to pu_map for the current frame being parsed
* where MVs and Intra pred modes will be updated
*/
UWORD8 *pu1_pic_pu_map;
/**
* Pointer to frame level pu_t for the current frame being parsed
* where MVs and Intra pred modes will be updated
*/
pu_t *ps_pic_pu;
/** PU Index map per CTB. The indices in this map are w.r.t picture pu array and not
* w.r.t CTB pu array.
* This will be used during mv prediction and since neighbours will have different CTB pu map
* it will be easier if they all have indices w.r.t picture level PU array rather than CTB level
* PU array.
* pu1_pic_pu_map is map w.r.t CTB's pu_t array
*/
UWORD32 *pu4_pic_pu_idx_map;
/**
* PU Index of top 4x4 neighbors stored for an entire row
*/
UWORD32 *pu4_pic_pu_idx_top;
/**
* PU Index of left 4x4 neighbors stored for 64 pixels
*/
UWORD32 *pu4_pic_pu_idx_left;
/**
* Holds top left PU index at CTB level - top left gets overwritten
* by left CTB while updating top array. Before updating top at CTB
* level required top-left index is backed up in the following
*/
UWORD32 u4_ctb_top_left_pu_idx;
/**
* Pointer to frame level tu_t for the current frame being parsed
* where transform unit related info will be updated
*/
tu_t *ps_pic_tu;
/**
* Current PU structure - set to CTB pu_map pointer at the start of CTB parsing
*/
UWORD8 *pu1_pu_map;
/** Current MV Bank's buffer ID */
WORD32 i4_cur_mv_bank_buf_id;
/**
* Current pictures intra mode map at 8x8 level
*/
UWORD8 *pu1_pic_intra_flag;
/**
* Current pictures loop filter flag map at 8x8 level
*/
UWORD8 *pu1_pic_no_loop_filter_flag;
/**
* Void pointer to process job context
*/
void *pv_proc_jobq;
/**
* Number of CTBs to be processed in the current Job
*/
WORD32 i4_ctb_cnt;
/**
* ID for the current context - Used for debugging
*/
WORD32 i4_id;
/**
* Flag to indicate if parsing status has to be checked
* Needed when parsing and processing are done in different threads
*/
WORD32 i4_check_parse_status;
/**
* Flag to indicate if processing status of top row CTBs has to be checked
* Needed when processing of different rows is done in different threads
*/
WORD32 i4_check_proc_status;
/**
* Holds Intra dequantization matrices
*/
WORD16 *api2_dequant_intra_matrix[4];
/**
* Holds Inter dequantization matrices
*/
WORD16 *api2_dequant_inter_matrix[4];
/**
* Temporary buffer 1 - Used as a scratch in inter_pred_ctb()
*/
WORD16 *pi2_inter_pred_tmp_buf1;
/**
* Temporary buffer 2 - Used as a scratch in inter_pred_ctb()
*/
WORD16 *pi2_inter_pred_tmp_buf2;
/**
* Temporary buffer 3 - Used as a scratch in inter_pred_ctb()
*/
WORD16 *pi2_inter_pred_tmp_buf3;
/**
* The above temporary buffers' stride
*/
WORD32 i4_inter_pred_tmp_buf_strd;
/**
* Picture stride
* Used as prediction stride, destination stride while computing inverse transform
*/
WORD32 i4_pic_strd;
/**
* Picture qp offset for U
*/
WORD8 i1_pic_cb_qp_offset;
/**
* Slice qp offset for U
*/
WORD32 i1_slice_cb_qp_offset;
/**
* Picture qp offset for V
*/
WORD8 i1_pic_cr_qp_offset;
/**
* Slice qp offset for V
*/
WORD32 i1_slice_cr_qp_offset;
/** Pointer to current picture buffer structure */
pic_buf_t *ps_cur_pic;
/** Current pic_buf's picture buffer id */
WORD32 i4_cur_pic_buf_id;
/** Pointer to 0th luma pixel in current pic */
UWORD8 *pu1_cur_pic_luma;
/** Pointer to 0th chroma pixel in current pic */
UWORD8 *pu1_cur_pic_chroma;
/** Intermediate buffer to be used during inverse transform */
WORD16 *pi2_itrans_intrmd_buf;
/** Buffer to hold output of inverse scan */
WORD16 *pi2_invscan_out;
/**
* Top availability for current CTB level
*/
UWORD8 u1_top_ctb_avail;
/**
* Top right availability for current CTB level
*/
UWORD8 u1_top_rt_ctb_avail;
/**
* Top left availability for current CTB level
*/
UWORD8 u1_top_lt_ctb_avail;
/**
* left availability for current CTB level
*/
UWORD8 u1_left_ctb_avail;
/**
* TU count in current CTB
*/
WORD32 i4_ctb_tu_cnt;
/**
* Recon pointer to current CTB luma
*/
UWORD8 *pu1_cur_ctb_luma;
/**
* Recon pointer to current CTB chroma
*/
UWORD8 *pu1_cur_ctb_chroma;
/**
* PU count in current CTB
*/
WORD32 i4_ctb_pu_cnt;
/**
* PU count in current CTB
*/
WORD32 i4_ctb_start_pu_idx;
/* Pointer to a structure describing output display buffer */
ivd_out_bufdesc_t *ps_out_buffer;
/** Flag to indicate if ps_proc was intialized at least once in a frame.
* This is needed to handle cases where a core starts to handle format conversion jobs directly
*/
WORD32 i4_init_done;
/**
* Pointer to the structure that contains BS and QP frame level arrays
*/
bs_ctxt_t s_bs_ctxt;
/**
* Pointer to the structure that contains deblock context
*/
deblk_ctxt_t s_deblk_ctxt;
/**
* Pointer to the structure that contains sao context
*/
sao_ctxt_t s_sao_ctxt;
/**
* Points to the array of slice indices which is used to identify the independent
* slice to which each CTB in a frame belongs.
*/
UWORD16 *pu1_slice_idx;
/**
* Points to the array of slice indices which is used to identify the slice
* to which each CTB in a frame belongs.
*/
UWORD16 *pu1_tile_idx;
/**
* Variable to store the next ctb count to compute pu idx
*/
WORD32 i4_next_pu_ctb_cnt;
/**
* Variable to store the next ctb count to compute tu idx
*/
WORD32 i4_next_tu_ctb_cnt;
/**
* Number of ctb's to process in one loop
*/
WORD32 i4_nctb;
}process_ctxt_t;
typedef void (*pf_inter_pred)(void *,
void *,
WORD32,
WORD32,
WORD8 *,
WORD32,
WORD32);
typedef void (*pf_intra_pred)(UWORD8 *pu1_ref,
WORD32 src_strd,
UWORD8 *pu1_dst,
WORD32 dst_strd,
WORD32 nt,
WORD32 mode);
typedef void (*pf_itrans_recon)(WORD16 *pi2_src,
WORD16 *pi2_tmp,
UWORD8 *pu1_pred,
UWORD8 *pu1_dst,
WORD32 src_strd,
WORD32 pred_strd,
WORD32 dst_strd,
WORD32 zero_cols,
WORD32 zero_rows);
typedef void (*pf_recon)(WORD16 *pi2_src,
UWORD8 *pu1_pred,
UWORD8 *pu1_dst,
WORD32 src_strd,
WORD32 pred_strd,
WORD32 dst_strd,
WORD32 zero_cols);
typedef void (*pf_itrans_recon_dc)(UWORD8 *pu1_pred,
UWORD8 *pu1_dst,
WORD32 pred_strd,
WORD32 dst_strd,
WORD32 log2_trans_size,
WORD16 i2_coeff_value);
typedef void (*pf_sao_luma)(UWORD8 *,
WORD32,
UWORD8 *,
UWORD8 *,
UWORD8 *,
UWORD8 *,
UWORD8 *,
UWORD8 *,
WORD8 *,
WORD32,
WORD32);
typedef void (*pf_sao_chroma)(UWORD8 *,
WORD32,
UWORD8 *,
UWORD8 *,
UWORD8 *,
UWORD8 *,
UWORD8 *,
UWORD8 *,
WORD8 *,
WORD8 *,
WORD32,
WORD32);
/**
* Codec context
*/
struct _codec_t
{
/**
* Width : pic_width_in_luma_samples
*/
WORD32 i4_wd;
/**
* Height : pic_height_in_luma_samples
*/
WORD32 i4_ht;
/**
* Display width after cropping
*/
WORD32 i4_disp_wd;
/**
* Display height after cropping
*/
WORD32 i4_disp_ht;
/**
* Display stride
*/
WORD32 i4_disp_strd;
/**
* Stride of reference buffers.
* For shared mode even display buffer will use the same stride
*/
WORD32 i4_strd;
/**
* Number of cores to be used
*/
WORD32 i4_num_cores;
/**
* RASL output flag
*/
WORD32 i4_rasl_output_flag;
/**
* This flag is set if the next picture received is a CRA and has to be treated as a first pic in the video sequence
* For example, it is set, if an EOS (end of stream) NAL is received
*/
WORD32 i4_cra_as_first_pic;
/**
* Pictures that are are degraded
* 0 : No degrade
* 1 : Only on non-reference frames
* 2 : Use interval specified by u4_nondegrade_interval
* 3 : All non-key frames
* 4 : All frames
*/
WORD32 i4_degrade_pics;
/**
* Interval for pictures which are completely decoded without any degradation
*/
WORD32 i4_nondegrade_interval;
/**
* bit position (lsb is zero): Type of degradation
* 0 : Disable SAO
* 1 : Disable deblocking
* 2 : Faster inter prediction filters
* 3 : Fastest inter prediction filters
*/
WORD32 i4_degrade_type;
/** Degrade pic count, Used to maintain the interval between non-degraded pics
*
*/
WORD32 i4_degrade_pic_cnt;
/**
* Total number of display buffers to be used
* In case of shared mode, this will be number of reference frames
*/
WORD32 i4_num_disp_bufs;
/**
* Flag to enable shared display buffer mode
*/
WORD32 i4_share_disp_buf;
/**
* Chroma format of display buffers.
In shared mode only 420SP_UV and 420SP_VU are supported
*/
IV_COLOR_FORMAT_T e_chroma_fmt;
/**
* Chroma format of reference buffers.
* In non-shared mode it will be 420SP_UV
* In shared mode only 420SP_UV and 420SP_VU are supported
*/
IV_COLOR_FORMAT_T e_ref_chroma_fmt;
/**
* Frame skip mode
*/
IVD_FRAME_SKIP_MODE_T e_pic_skip_mode;
/**
* Display or decode order dump of output
*/
IVD_DISPLAY_FRAME_OUT_MODE_T e_pic_out_order;
/**
* Coding type of the picture that is decoded
*/
IV_PICTURE_CODING_TYPE_T e_dec_pic_type;
/**
* Flag to signal if a frame was decoded in this call
*/
WORD32 i4_pic_decoded;
/**
* Flag to signal if picture data is present in the current input bitstream
*/
WORD32 i4_pic_present;
/**
* Flag to disable deblocking of a frame
*/
WORD32 i4_disable_deblk_pic;
/**
* Flag to disable sao of a frame
*/
WORD32 i4_disable_sao_pic;
/**
* Flag to use full pel MC
*/
WORD32 i4_fullpel_inter_pred;
/**
* Flush mode
*/
WORD32 i4_flush_mode;
/**
* Decode header mode
*/
WORD32 i4_header_mode;
/**
* Header in slice mode
*/
WORD32 i4_header_in_slice_mode;
/**
* Flag to signal sps done
*/
WORD32 i4_sps_done;
/**
* Flag to signal pps done
*/
WORD32 i4_pps_done;
/**
* To signal successful completion of init
*/
WORD32 i4_init_done;
/**
* To signal that at least one picture was decoded
*/
WORD32 i4_first_pic_done;
/**
* To signal error in slice
*/
WORD32 i4_slice_error;
/**
* Reset flag - Codec is reset if this flag is set
*/
WORD32 i4_reset_flag;
/**
* Number of pictures decoded till now
*/
UWORD32 u4_pic_cnt;
/**
* Number of pictures displayed till now
*/
UWORD32 u4_disp_cnt;
/**
* Current error code
*/
WORD32 i4_error_code;
/**
* Pointer to input bitstream. This is incremented everytime a NAL is processed
*/
UWORD8 *pu1_inp_bitsbuf;
/**
* Offset to first byte after the start code in current NAL
*/
WORD32 i4_nal_ofst;
/**
* Length of the NAL unit including the emulation bytes
*/
WORD32 i4_nal_len;
/**
* Number of emulation prevention bytes present in the current NAL
*/
WORD32 i4_num_emln_bytes;
/**
* Number of bytes remaining in the input bitstream
*/
/**
* Decremented everytime a NAL is processed
*/
WORD32 i4_bytes_remaining;
/**
* Pointer to bitstream after emulation prevention
*/
UWORD8 *pu1_bitsbuf;
/**
* Pointer to static bitstream after emulation prevention
* This is a fixed size buffer used initially till SPS is decoded
*/
UWORD8 *pu1_bitsbuf_static;
/**
* Pointer to dynamic bitstream after emulation prevention
* This is allocated after SPS is done, based on width and height
*/
UWORD8 *pu1_bitsbuf_dynamic;
/**
* Size of intermediate bitstream buffer
*/
UWORD32 u4_bitsbuf_size;
/**
* Size of intermediate static bitstream buffer
*/
UWORD32 u4_bitsbuf_size_static;
/**
* Size of intermediate dynamic bitstream buffer
*/
UWORD32 u4_bitsbuf_size_dynamic;
/**
* Pointer to hold TU data for a set of CTBs or a picture
*/
void *pv_tu_data;
/**
* Process Job queue buffer base
*/
void *pv_proc_jobq_buf;
/**
* Process Job Queue mem tab size
*/
WORD32 i4_proc_jobq_buf_size;
/** Parse status: one byte per CTB */
UWORD8 *pu1_parse_map;
/** Process status: one byte per CTB */
UWORD8 *pu1_proc_map;
/**
* Current pictures intra mode map at 8x8 level
*/
UWORD8 *pu1_pic_intra_flag;
/**
* No LPF buffer base
*/
UWORD8 *pu1_pic_no_loop_filter_flag_base;
/**
* Current pictures loop filter flag map at 8x8 level
*/
UWORD8 *pu1_pic_no_loop_filter_flag;
/**
* MV Bank buffer manager
*/
void *pv_mv_buf_mgr;
/**
* Pointer to MV Buf structure array
*/
void *ps_mv_buf;
/** Holds the number of mv_buf_t structures allocated */
WORD32 i4_max_dpb_size;
/**
* Base address for Motion Vector bank buffer
*/
void *pv_mv_bank_buf_base;
/**
* MV Bank size allocated
*/
WORD32 i4_total_mv_bank_size;
/**
* Picture buffer manager
*/
void *pv_pic_buf_mgr;
/**
* Pointer to Pic Buf structure array
*/
void *ps_pic_buf;
/**
* Base address for Picture buffer
*/
void *pv_pic_buf_base;
/**
* Total pic buffer size allocated
*/
WORD32 i4_total_pic_buf_size;
/**
* Current chroma buffer base - used for shared mode with 420p output
*/
UWORD8 *pu1_cur_chroma_ref_buf;
/**
* Picture buffer manager
*/
void *pv_disp_buf_mgr;
/**
* Current display buffer's buffer ID
*/
WORD32 i4_disp_buf_id;
/**
* Current display buffer
*/
pic_buf_t *ps_disp_buf;
/**
* Pointer to dpb manager structure
*/
void *pv_dpb_mgr;
/**
* Scaling matrices for each PPS
*/
WORD16 *pi2_scaling_mat;
/**
* Array containing Tile information for each PPS
*/
tile_t *ps_tile;
/**
* Timestamp associated with the current display output
*/
UWORD32 u4_ts;
/**
* Pointer to base of Video parameter set structure array
*/
vps_t *ps_vps_base;
/**
* Pointer to base of Sequence parameter set structure array
*/
sps_t *ps_sps_base;
/**
* Pointer to base of Picture parameter set structure array
*/
pps_t *ps_pps_base;
/**
* Pointer to base of slice header structure array
*/
slice_header_t *ps_slice_hdr_base;
/**
* Pointer to base of entry point offsets in a frame
*/
WORD32 *pi4_entry_ofst;
/**
* Current offset in pi4_entry_ofst
*/
WORD32 i4_cur_entry_ofst;
/**
* Parsing context
*/
parse_ctxt_t s_parse;
/**
* Processing context - One for each processing thread
*/
process_ctxt_t as_process[MAX_PROCESS_THREADS];
/**
* Thread handle for each of the processing threads
*/
void *apv_process_thread_handle[MAX_PROCESS_THREADS];
/**
* Thread created flag for each of the processing threads
*/
WORD32 ai4_process_thread_created[MAX_PROCESS_THREADS];
/**
* Void pointer to process job context
*/
void *pv_proc_jobq;
/* Number of CTBs processed together for better instruction cache handling */
WORD32 i4_proc_nctb;
/**
* Previous POC lsb
*/
WORD32 i4_prev_poc_lsb;
/**
* Previous POC msb
*/
WORD32 i4_prev_poc_msb;
/**
* Max POC lsb that has arrived till now
*/
WORD32 i4_max_prev_poc_lsb;
/** Context for format conversion */
fmt_conv_t s_fmt_conv;
/** Pointer to a structure describing output display buffer */
ivd_out_bufdesc_t *ps_out_buffer;
/**
* Variable to store the next ctb count to compute pu idx
*/
WORD32 i4_next_pu_ctb_cnt;
/**
* Variable to store the next ctb count to compute tu idx
*/
WORD32 i4_next_tu_ctb_cnt;
/** Active SPS id - mainly to be used during codec initializations in shared mode */
WORD32 i4_sps_id;
/** Number of ctbs to be decoded in one process call */
UWORD32 u4_nctb;
/** Flag to enable scheduling of format conversion jobs ahead of processing jobs */
UWORD32 u4_enable_fmt_conv_ahead;
/** Mask used to change MVs to full pel when configured to run in reduced complexity mode */
WORD32 i4_mv_frac_mask;
/** Memory holding tile indices */
UWORD8 *pu1_tile_idx_base;
/** Callback for aligned allocation */
void *(*pf_aligned_alloc)(void *pv_mem_ctxt, WORD32 alignment, WORD32 size);
/** Callback for aligned free */
void (*pf_aligned_free)(void *pv_mem_ctxt, void *pv_buf);
/** Memory context passed from application */
void *pv_mem_ctxt;
/** Base address of reference buffrers allocated */
UWORD8 *pu1_ref_pic_buf_base;
/** Flag to indicate if dynamic buffers are allocated */
UWORD32 u4_allocate_dynamic_done;
/** Flag to signal display order */
IVD_DISPLAY_FRAME_OUT_MODE_T e_frm_out_mode;
/** Funtion pointers for inter_pred leaf level functions */
pf_inter_pred apf_inter_pred[22];
/** Funtion pointers for inter_pred_luma leaf level functions */
pf_intra_pred apf_intra_pred_luma[11];
/** Funtion pointers for inter_pred_chroma leaf level functions */
pf_intra_pred apf_intra_pred_chroma[11];
/** Funtion pointers for itrans_recon leaf level functions */
pf_itrans_recon apf_itrans_recon[8];
/** Funtion pointers for recon leaf level functions */
pf_recon apf_recon[8];
/** Funtion pointers for itrans_recon_dc leaf level functions */
pf_itrans_recon_dc apf_itrans_recon_dc[2];
/** Funtion pointers for sao_luma leaf level functions */
pf_sao_luma apf_sao_luma[4];
/** Funtion pointers for sao_chroma leaf level functions */
pf_sao_chroma apf_sao_chroma[4];
/** Funtion pointers for all the leaf level functions */
func_selector_t s_func_selector;
/** Processor architecture */
IVD_ARCH_T e_processor_arch;
/** Processor soc */
IVD_SOC_T e_processor_soc;
/** Display buffer array - for shared mode */
ivd_out_bufdesc_t s_disp_buffer[IVD_VIDDEC_MAX_IO_BUFFERS];
/** Number of active display buffers - for shared mode */
WORD32 i4_share_disp_buf_cnt;
};
#endif /* _IHEVCD_STRUCTS_H_ */