diff --git a/modified/scsi/scsi.h b/modified/scsi/scsi.h
index 0ca0e12..04b4e1c 100644
--- a/modified/scsi/scsi.h
+++ b/modified/scsi/scsi.h
@@ -123,6 +123,7 @@
 #define CLEAR_TASK_SET      0x0e
 #define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
 #define RELEASE_RECOVERY    0x10            /* SCSI-II only */
+#define TERMINATE_IO_PROC   0x11            /* SCSI-II only */
 #define CLEAR_ACA           0x16
 #define LOGICAL_UNIT_RESET  0x17
 #define SIMPLE_QUEUE_TAG    0x20
@@ -167,6 +168,7 @@
 				 * paths might yield different results */
 #define DID_ALLOC_FAILURE 0x12  /* Space allocation on the device failed */
 #define DID_MEDIUM_ERROR  0x13  /* Medium error */
+#define DID_TRANSPORT_MARGINAL 0x14 /* Transport marginal errors */
 #define DRIVER_OK       0x00	/* Driver status                           */
 
 /*
diff --git a/original/scsi/scsi.h b/original/scsi/scsi.h
index 5339baa..e75cca2 100644
--- a/original/scsi/scsi.h
+++ b/original/scsi/scsi.h
@@ -116,6 +116,7 @@
 #define CLEAR_TASK_SET      0x0e
 #define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
 #define RELEASE_RECOVERY    0x10            /* SCSI-II only */
+#define TERMINATE_IO_PROC   0x11            /* SCSI-II only */
 #define CLEAR_ACA           0x16
 #define LOGICAL_UNIT_RESET  0x17
 #define SIMPLE_QUEUE_TAG    0x20
@@ -159,6 +160,7 @@
 				 * paths might yield different results */
 #define DID_ALLOC_FAILURE 0x12  /* Space allocation on the device failed */
 #define DID_MEDIUM_ERROR  0x13  /* Medium error */
+#define DID_TRANSPORT_MARGINAL 0x14 /* Transport marginal errors */
 #define DRIVER_OK       0x00	/* Driver status                           */
 
 /*
diff --git a/original/uapi/asm-arm/asm/unistd-common.h b/original/uapi/asm-arm/asm/unistd-common.h
index 2250459..e38b11c 100644
--- a/original/uapi/asm-arm/asm/unistd-common.h
+++ b/original/uapi/asm-arm/asm/unistd-common.h
@@ -396,5 +396,6 @@
 #define __NR_faccessat2 (__NR_SYSCALL_BASE + 439)
 #define __NR_process_madvise (__NR_SYSCALL_BASE + 440)
 #define __NR_epoll_pwait2 (__NR_SYSCALL_BASE + 441)
+#define __NR_mount_setattr (__NR_SYSCALL_BASE + 442)
 
 #endif /* _UAPI_ASM_ARM_UNISTD_COMMON_H */
diff --git a/original/uapi/asm-generic/unistd.h b/original/uapi/asm-generic/unistd.h
index 7287529..ce58cff 100644
--- a/original/uapi/asm-generic/unistd.h
+++ b/original/uapi/asm-generic/unistd.h
@@ -861,9 +861,11 @@
 __SYSCALL(__NR_process_madvise, sys_process_madvise)
 #define __NR_epoll_pwait2 441
 __SC_COMP(__NR_epoll_pwait2, sys_epoll_pwait2, compat_sys_epoll_pwait2)
+#define __NR_mount_setattr 442
+__SYSCALL(__NR_mount_setattr, sys_mount_setattr)
 
 #undef __NR_syscalls
-#define __NR_syscalls 442
+#define __NR_syscalls 443
 
 /*
  * 32 bit systems traditionally used different
diff --git a/original/uapi/asm-x86/asm/kvm.h b/original/uapi/asm-x86/asm/kvm.h
index 8e76d37..5a3022c 100644
--- a/original/uapi/asm-x86/asm/kvm.h
+++ b/original/uapi/asm-x86/asm/kvm.h
@@ -112,6 +112,7 @@
 #define KVM_NR_IRQCHIPS          3
 
 #define KVM_RUN_X86_SMM		 (1 << 0)
+#define KVM_RUN_X86_BUS_LOCK     (1 << 1)
 
 /* for KVM_GET_REGS and KVM_SET_REGS */
 struct kvm_regs {
diff --git a/original/uapi/asm-x86/asm/unistd_32.h b/original/uapi/asm-x86/asm/unistd_32.h
index b0cd842..e3d32ca 100644
--- a/original/uapi/asm-x86/asm/unistd_32.h
+++ b/original/uapi/asm-x86/asm/unistd_32.h
@@ -432,9 +432,10 @@
 #define __NR_faccessat2 439
 #define __NR_process_madvise 440
 #define __NR_epoll_pwait2 441
+#define __NR_mount_setattr 442
 
 #ifdef __KERNEL__
-#define __NR_syscall_max 441
+#define __NR_syscall_max 442
 #endif
 
 #endif /* _ASM_X86_UNISTD_32_H */
diff --git a/original/uapi/asm-x86/asm/unistd_64.h b/original/uapi/asm-x86/asm/unistd_64.h
index 8b6fbb8..ffbe094 100644
--- a/original/uapi/asm-x86/asm/unistd_64.h
+++ b/original/uapi/asm-x86/asm/unistd_64.h
@@ -354,9 +354,10 @@
 #define __NR_faccessat2 439
 #define __NR_process_madvise 440
 #define __NR_epoll_pwait2 441
+#define __NR_mount_setattr 442
 
 #ifdef __KERNEL__
-#define __NR_syscall_max 441
+#define __NR_syscall_max 442
 #endif
 
 #endif /* _ASM_X86_UNISTD_64_H */
diff --git a/original/uapi/asm-x86/asm/unistd_x32.h b/original/uapi/asm-x86/asm/unistd_x32.h
index 0490786..7b7ee98 100644
--- a/original/uapi/asm-x86/asm/unistd_x32.h
+++ b/original/uapi/asm-x86/asm/unistd_x32.h
@@ -307,6 +307,7 @@
 #define __NR_faccessat2 (__X32_SYSCALL_BIT + 439)
 #define __NR_process_madvise (__X32_SYSCALL_BIT + 440)
 #define __NR_epoll_pwait2 (__X32_SYSCALL_BIT + 441)
+#define __NR_mount_setattr (__X32_SYSCALL_BIT + 442)
 #define __NR_rt_sigaction (__X32_SYSCALL_BIT + 512)
 #define __NR_rt_sigreturn (__X32_SYSCALL_BIT + 513)
 #define __NR_ioctl (__X32_SYSCALL_BIT + 514)
diff --git a/original/uapi/asm-x86/asm/vm86.h b/original/uapi/asm-x86/asm/vm86.h
index d2ee4e3..18909b8 100644
--- a/original/uapi/asm-x86/asm/vm86.h
+++ b/original/uapi/asm-x86/asm/vm86.h
@@ -97,7 +97,7 @@
 struct vm86_struct {
 	struct vm86_regs regs;
 	unsigned long flags;
-	unsigned long screen_bitmap;
+	unsigned long screen_bitmap;		/* unused, preserved by vm86() */
 	unsigned long cpu_type;
 	struct revectored_struct int_revectored;
 	struct revectored_struct int21_revectored;
@@ -106,7 +106,7 @@
 /*
  * flags masks
  */
-#define VM86_SCREEN_BITMAP	0x0001
+#define VM86_SCREEN_BITMAP	0x0001        /* no longer supported */
 
 struct vm86plus_info_struct {
 	unsigned long force_return_for_pic:1;
diff --git a/original/uapi/asm-x86/asm/vmx.h b/original/uapi/asm-x86/asm/vmx.h
index ada955c..b8e650a 100644
--- a/original/uapi/asm-x86/asm/vmx.h
+++ b/original/uapi/asm-x86/asm/vmx.h
@@ -89,6 +89,7 @@
 #define EXIT_REASON_XRSTORS             64
 #define EXIT_REASON_UMWAIT              67
 #define EXIT_REASON_TPAUSE              68
+#define EXIT_REASON_BUS_LOCK            74
 
 #define VMX_EXIT_REASONS \
 	{ EXIT_REASON_EXCEPTION_NMI,         "EXCEPTION_NMI" }, \
@@ -150,7 +151,8 @@
 	{ EXIT_REASON_XSAVES,                "XSAVES" }, \
 	{ EXIT_REASON_XRSTORS,               "XRSTORS" }, \
 	{ EXIT_REASON_UMWAIT,                "UMWAIT" }, \
-	{ EXIT_REASON_TPAUSE,                "TPAUSE" }
+	{ EXIT_REASON_TPAUSE,                "TPAUSE" }, \
+	{ EXIT_REASON_BUS_LOCK,              "BUS_LOCK" }
 
 #define VMX_EXIT_REASON_FLAGS \
 	{ VMX_EXIT_REASONS_FAILED_VMENTRY,	"FAILED_VMENTRY" }
diff --git a/original/uapi/drm/drm.h b/original/uapi/drm/drm.h
index 808b48a..0827037 100644
--- a/original/uapi/drm/drm.h
+++ b/original/uapi/drm/drm.h
@@ -1,11 +1,10 @@
-/**
- * \file drm.h
+/*
  * Header for the Direct Rendering Manager
  *
- * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ * Author: Rickard E. (Rik) Faith <faith@valinux.com>
  *
- * \par Acknowledgments:
- * Dec 1999, Richard Henderson <rth@twiddle.net>, move to generic \c cmpxchg.
+ * Acknowledgments:
+ * Dec 1999, Richard Henderson <rth@twiddle.net>, move to generic cmpxchg.
  */
 
 /*
@@ -85,7 +84,7 @@
 typedef unsigned int drm_drawable_t;
 typedef unsigned int drm_magic_t;
 
-/**
+/*
  * Cliprect.
  *
  * \warning: If you change this structure, make sure you change
@@ -101,7 +100,7 @@
 	unsigned short y2;
 };
 
-/**
+/*
  * Drawable information.
  */
 struct drm_drawable_info {
@@ -109,7 +108,7 @@
 	struct drm_clip_rect *rects;
 };
 
-/**
+/*
  * Texture region,
  */
 struct drm_tex_region {
@@ -120,7 +119,7 @@
 	unsigned int age;
 };
 
-/**
+/*
  * Hardware lock.
  *
  * The lock structure is a simple cache-line aligned integer.  To avoid
@@ -132,7 +131,7 @@
 	char padding[60];			/**< Pad to cache line */
 };
 
-/**
+/*
  * DRM_IOCTL_VERSION ioctl argument type.
  *
  * \sa drmGetVersion().
@@ -149,7 +148,7 @@
 	char __user *desc;	  /**< User-space buffer to hold desc */
 };
 
-/**
+/*
  * DRM_IOCTL_GET_UNIQUE ioctl argument type.
  *
  * \sa drmGetBusid() and drmSetBusId().
@@ -168,7 +167,7 @@
 	int unused;
 };
 
-/**
+/*
  * DRM_IOCTL_CONTROL ioctl argument type.
  *
  * \sa drmCtlInstHandler() and drmCtlUninstHandler().
@@ -183,7 +182,7 @@
 	int irq;
 };
 
-/**
+/*
  * Type of memory to map.
  */
 enum drm_map_type {
@@ -195,7 +194,7 @@
 	_DRM_CONSISTENT = 5	  /**< Consistent memory for PCI DMA */
 };
 
-/**
+/*
  * Memory mapping flags.
  */
 enum drm_map_flags {
@@ -214,7 +213,7 @@
 	void *handle;		 /**< Handle of map */
 };
 
-/**
+/*
  * DRM_IOCTL_GET_MAP, DRM_IOCTL_ADD_MAP and DRM_IOCTL_RM_MAP ioctls
  * argument type.
  *
@@ -231,7 +230,7 @@
 	/*   Private data */
 };
 
-/**
+/*
  * DRM_IOCTL_GET_CLIENT ioctl argument type.
  */
 struct drm_client {
@@ -263,7 +262,7 @@
 	    /* Add to the *END* of the list */
 };
 
-/**
+/*
  * DRM_IOCTL_GET_STATS ioctl argument type.
  */
 struct drm_stats {
@@ -274,7 +273,7 @@
 	} data[15];
 };
 
-/**
+/*
  * Hardware locking flags.
  */
 enum drm_lock_flags {
@@ -289,7 +288,7 @@
 	_DRM_HALT_CUR_QUEUES = 0x20  /**< Halt all current queues */
 };
 
-/**
+/*
  * DRM_IOCTL_LOCK, DRM_IOCTL_UNLOCK and DRM_IOCTL_FINISH ioctl argument type.
  *
  * \sa drmGetLock() and drmUnlock().
@@ -299,7 +298,7 @@
 	enum drm_lock_flags flags;
 };
 
-/**
+/*
  * DMA flags
  *
  * \warning
@@ -328,7 +327,7 @@
 	_DRM_DMA_LARGER_OK = 0x40     /**< Larger-than-requested buffers OK */
 };
 
-/**
+/*
  * DRM_IOCTL_ADD_BUFS and DRM_IOCTL_MARK_BUFS ioctl argument type.
  *
  * \sa drmAddBufs().
@@ -351,7 +350,7 @@
 				  */
 };
 
-/**
+/*
  * DRM_IOCTL_INFO_BUFS ioctl argument type.
  */
 struct drm_buf_info {
@@ -359,7 +358,7 @@
 	struct drm_buf_desc __user *list;
 };
 
-/**
+/*
  * DRM_IOCTL_FREE_BUFS ioctl argument type.
  */
 struct drm_buf_free {
@@ -367,7 +366,7 @@
 	int __user *list;
 };
 
-/**
+/*
  * Buffer information
  *
  * \sa drm_buf_map.
@@ -379,7 +378,7 @@
 	void __user *address;	       /**< Address of buffer */
 };
 
-/**
+/*
  * DRM_IOCTL_MAP_BUFS ioctl argument type.
  */
 struct drm_buf_map {
@@ -392,7 +391,7 @@
 	struct drm_buf_pub __user *list;	/**< Buffer information */
 };
 
-/**
+/*
  * DRM_IOCTL_DMA ioctl argument type.
  *
  * Indices here refer to the offset into the buffer list in drm_buf_get.
@@ -417,7 +416,7 @@
 	_DRM_CONTEXT_2DONLY = 0x02
 };
 
-/**
+/*
  * DRM_IOCTL_ADD_CTX ioctl argument type.
  *
  * \sa drmCreateContext() and drmDestroyContext().
@@ -427,7 +426,7 @@
 	enum drm_ctx_flags flags;
 };
 
-/**
+/*
  * DRM_IOCTL_RES_CTX ioctl argument type.
  */
 struct drm_ctx_res {
@@ -435,14 +434,14 @@
 	struct drm_ctx __user *contexts;
 };
 
-/**
+/*
  * DRM_IOCTL_ADD_DRAW and DRM_IOCTL_RM_DRAW ioctl argument type.
  */
 struct drm_draw {
 	drm_drawable_t handle;
 };
 
-/**
+/*
  * DRM_IOCTL_UPDATE_DRAW ioctl argument type.
  */
 typedef enum {
@@ -456,14 +455,14 @@
 	unsigned long long data;
 };
 
-/**
+/*
  * DRM_IOCTL_GET_MAGIC and DRM_IOCTL_AUTH_MAGIC ioctl argument type.
  */
 struct drm_auth {
 	drm_magic_t magic;
 };
 
-/**
+/*
  * DRM_IOCTL_IRQ_BUSID ioctl argument type.
  *
  * \sa drmGetInterruptFromBusID().
@@ -505,7 +504,7 @@
 	long tval_usec;
 };
 
-/**
+/*
  * DRM_IOCTL_WAIT_VBLANK ioctl argument type.
  *
  * \sa drmWaitVBlank().
@@ -518,7 +517,7 @@
 #define _DRM_PRE_MODESET 1
 #define _DRM_POST_MODESET 2
 
-/**
+/*
  * DRM_IOCTL_MODESET_CTL ioctl argument type
  *
  * \sa drmModesetCtl().
@@ -528,7 +527,7 @@
 	__u32 cmd;
 };
 
-/**
+/*
  * DRM_IOCTL_AGP_ENABLE ioctl argument type.
  *
  * \sa drmAgpEnable().
@@ -537,7 +536,7 @@
 	unsigned long mode;	/**< AGP mode */
 };
 
-/**
+/*
  * DRM_IOCTL_AGP_ALLOC and DRM_IOCTL_AGP_FREE ioctls argument type.
  *
  * \sa drmAgpAlloc() and drmAgpFree().
@@ -549,7 +548,7 @@
 	unsigned long physical;	/**< Physical used by i810 */
 };
 
-/**
+/*
  * DRM_IOCTL_AGP_BIND and DRM_IOCTL_AGP_UNBIND ioctls argument type.
  *
  * \sa drmAgpBind() and drmAgpUnbind().
@@ -559,7 +558,7 @@
 	unsigned long offset;	/**< In bytes -- will round to page boundary */
 };
 
-/**
+/*
  * DRM_IOCTL_AGP_INFO ioctl argument type.
  *
  * \sa drmAgpVersionMajor(), drmAgpVersionMinor(), drmAgpGetMode(),
@@ -580,7 +579,7 @@
 	unsigned short id_device;
 };
 
-/**
+/*
  * DRM_IOCTL_SG_ALLOC ioctl argument type.
  */
 struct drm_scatter_gather {
@@ -588,7 +587,7 @@
 	unsigned long handle;	/**< Used for mapping / unmapping */
 };
 
-/**
+/*
  * DRM_IOCTL_SET_VERSION ioctl argument type.
  */
 struct drm_set_version {
@@ -598,14 +597,14 @@
 	int drm_dd_minor;
 };
 
-/** DRM_IOCTL_GEM_CLOSE ioctl argument type */
+/* DRM_IOCTL_GEM_CLOSE ioctl argument type */
 struct drm_gem_close {
 	/** Handle of the object to be closed. */
 	__u32 handle;
 	__u32 pad;
 };
 
-/** DRM_IOCTL_GEM_FLINK ioctl argument type */
+/* DRM_IOCTL_GEM_FLINK ioctl argument type */
 struct drm_gem_flink {
 	/** Handle for the object being named */
 	__u32 handle;
@@ -614,7 +613,7 @@
 	__u32 name;
 };
 
-/** DRM_IOCTL_GEM_OPEN ioctl argument type */
+/* DRM_IOCTL_GEM_OPEN ioctl argument type */
 struct drm_gem_open {
 	/** Name of object being opened */
 	__u32 name;
@@ -652,7 +651,7 @@
 #define DRM_CAP_SYNCOBJ		0x13
 #define DRM_CAP_SYNCOBJ_TIMELINE	0x14
 
-/** DRM_IOCTL_GET_CAP ioctl argument type */
+/* DRM_IOCTL_GET_CAP ioctl argument type */
 struct drm_get_cap {
 	__u64 capability;
 	__u64 value;
@@ -678,7 +677,9 @@
 /**
  * DRM_CLIENT_CAP_ATOMIC
  *
- * If set to 1, the DRM core will expose atomic properties to userspace
+ * If set to 1, the DRM core will expose atomic properties to userspace. This
+ * implicitly enables &DRM_CLIENT_CAP_UNIVERSAL_PLANES and
+ * &DRM_CLIENT_CAP_ASPECT_RATIO.
  */
 #define DRM_CLIENT_CAP_ATOMIC	3
 
@@ -698,7 +699,7 @@
  */
 #define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS	5
 
-/** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
+/* DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
 struct drm_set_client_cap {
 	__u64 capability;
 	__u64 value;
@@ -950,7 +951,7 @@
 
 #define DRM_IOCTL_MODE_GETFB2		DRM_IOWR(0xCE, struct drm_mode_fb_cmd2)
 
-/**
+/*
  * Device specific ioctls should only be in their respective headers
  * The device specific ioctl range is from 0x40 to 0x9f.
  * Generic IOCTLS restart at 0xA0.
@@ -961,7 +962,7 @@
 #define DRM_COMMAND_BASE                0x40
 #define DRM_COMMAND_END			0xA0
 
-/**
+/*
  * Header for events written back to userspace on the drm fd.  The
  * type defines the type of event, the length specifies the total
  * length of the event (including the header), and user_data is
diff --git a/original/uapi/drm/drm_fourcc.h b/original/uapi/drm/drm_fourcc.h
index 723c8e2..f76de49 100644
--- a/original/uapi/drm/drm_fourcc.h
+++ b/original/uapi/drm/drm_fourcc.h
@@ -528,6 +528,25 @@
 #define I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS fourcc_mod_code(INTEL, 7)
 
 /*
+ * Intel Color Control Surface with Clear Color (CCS) for Gen-12 render
+ * compression.
+ *
+ * The main surface is Y-tiled and is at plane index 0 whereas CCS is linear
+ * and at index 1. The clear color is stored at index 2, and the pitch should
+ * be ignored. The clear color structure is 256 bits. The first 128 bits
+ * represents Raw Clear Color Red, Green, Blue and Alpha color each represented
+ * by 32 bits. The raw clear color is consumed by the 3d engine and generates
+ * the converted clear color of size 64 bits. The first 32 bits store the Lower
+ * Converted Clear Color value and the next 32 bits store the Higher Converted
+ * Clear Color value when applicable. The Converted Clear Color values are
+ * consumed by the DE. The last 64 bits are used to store Color Discard Enable
+ * and Depth Clear Value Valid which are ignored by the DE. A CCS cache line
+ * corresponds to an area of 4x1 tiles in the main surface. The main surface
+ * pitch is required to be a multiple of 4 tile widths.
+ */
+#define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC fourcc_mod_code(INTEL, 8)
+
+/*
  * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks
  *
  * Macroblocks are laid in a Z-shape, and each pixel data is following the
@@ -1036,9 +1055,9 @@
  * Not all combinations are valid, and different SoCs may support different
  * combinations of layout and options.
  */
-#define __fourcc_mod_amlogic_layout_mask 0xf
+#define __fourcc_mod_amlogic_layout_mask 0xff
 #define __fourcc_mod_amlogic_options_shift 8
-#define __fourcc_mod_amlogic_options_mask 0xf
+#define __fourcc_mod_amlogic_options_mask 0xff
 
 #define DRM_FORMAT_MOD_AMLOGIC_FBC(__layout, __options) \
 	fourcc_mod_code(AMLOGIC, \
diff --git a/original/uapi/drm/drm_mode.h b/original/uapi/drm/drm_mode.h
index b49fbf2..1c06462 100644
--- a/original/uapi/drm/drm_mode.h
+++ b/original/uapi/drm/drm_mode.h
@@ -414,15 +414,12 @@
  *
  * If the @count_modes field is set to zero, the kernel will perform a forced
  * probe on the connector to refresh the connector status, modes and EDID.
- * A forced-probe can be slow and the ioctl will block. A force-probe can cause
- * flickering and temporary freezes, so it should not be performed
- * automatically.
+ * A forced-probe can be slow, might cause flickering and the ioctl will block.
  *
- * User-space shouldn't need to force-probe connectors in general: the kernel
- * will automatically take care of probing connectors that don't support
- * hot-plug detection when appropriate. However, user-space may force-probe
- * connectors on user request (e.g. clicking a "Scan connectors" button, or
- * opening a UI to manage screens).
+ * User-space needs to force-probe connectors to ensure their metadata is
+ * up-to-date at startup and after receiving a hot-plug event. User-space
+ * may perform a forced-probe when the user explicitly requests it. User-space
+ * shouldn't perform a forced-probe in other situations.
  */
 struct drm_mode_get_connector {
 	/** @encoders_ptr: Pointer to ``__u32`` array of object IDs. */
diff --git a/original/uapi/drm/i915_drm.h b/original/uapi/drm/i915_drm.h
index fa1f3d6..1987e2e 100644
--- a/original/uapi/drm/i915_drm.h
+++ b/original/uapi/drm/i915_drm.h
@@ -177,8 +177,9 @@
 #define I915_PMU_REQUESTED_FREQUENCY	__I915_PMU_OTHER(1)
 #define I915_PMU_INTERRUPTS		__I915_PMU_OTHER(2)
 #define I915_PMU_RC6_RESIDENCY		__I915_PMU_OTHER(3)
+#define I915_PMU_SOFTWARE_GT_AWAKE_TIME	__I915_PMU_OTHER(4)
 
-#define I915_PMU_LAST I915_PMU_RC6_RESIDENCY
+#define I915_PMU_LAST /* Deprecated - do not use */ I915_PMU_RC6_RESIDENCY
 
 /* Each region is a minimum of 16k, and there are at most 255 of them.
  */
diff --git a/original/uapi/linux/acrn.h b/original/uapi/linux/acrn.h
new file mode 100644
index 0000000..353b2a2
--- /dev/null
+++ b/original/uapi/linux/acrn.h
@@ -0,0 +1,580 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Userspace interface for /dev/acrn_hsm - ACRN Hypervisor Service Module
+ *
+ * This file can be used by applications that need to communicate with the HSM
+ * via the ioctl interface.
+ *
+ * Copyright (C) 2021 Intel Corporation. All rights reserved.
+ */
+
+#ifndef _UAPI_ACRN_H
+#define _UAPI_ACRN_H
+
+#include <linux/types.h>
+#include <linux/uuid.h>
+
+#define ACRN_IO_REQUEST_MAX		16
+
+#define ACRN_IOREQ_STATE_PENDING	0
+#define ACRN_IOREQ_STATE_COMPLETE	1
+#define ACRN_IOREQ_STATE_PROCESSING	2
+#define ACRN_IOREQ_STATE_FREE		3
+
+#define ACRN_IOREQ_TYPE_PORTIO		0
+#define ACRN_IOREQ_TYPE_MMIO		1
+#define ACRN_IOREQ_TYPE_PCICFG		2
+
+#define ACRN_IOREQ_DIR_READ		0
+#define ACRN_IOREQ_DIR_WRITE		1
+
+/**
+ * struct acrn_mmio_request - Info of a MMIO I/O request
+ * @direction:	Access direction of this request (ACRN_IOREQ_DIR_*)
+ * @reserved:	Reserved for alignment and should be 0
+ * @address:	Access address of this MMIO I/O request
+ * @size:	Access size of this MMIO I/O request
+ * @value:	Read/write value of this MMIO I/O request
+ */
+struct acrn_mmio_request {
+	__u32	direction;
+	__u32	reserved;
+	__u64	address;
+	__u64	size;
+	__u64	value;
+};
+
+/**
+ * struct acrn_pio_request - Info of a PIO I/O request
+ * @direction:	Access direction of this request (ACRN_IOREQ_DIR_*)
+ * @reserved:	Reserved for alignment and should be 0
+ * @address:	Access address of this PIO I/O request
+ * @size:	Access size of this PIO I/O request
+ * @value:	Read/write value of this PIO I/O request
+ */
+struct acrn_pio_request {
+	__u32	direction;
+	__u32	reserved;
+	__u64	address;
+	__u64	size;
+	__u32	value;
+};
+
+/**
+ * struct acrn_pci_request - Info of a PCI I/O request
+ * @direction:	Access direction of this request (ACRN_IOREQ_DIR_*)
+ * @reserved:	Reserved for alignment and should be 0
+ * @size:	Access size of this PCI I/O request
+ * @value:	Read/write value of this PIO I/O request
+ * @bus:	PCI bus value of this PCI I/O request
+ * @dev:	PCI device value of this PCI I/O request
+ * @func:	PCI function value of this PCI I/O request
+ * @reg:	PCI config space offset of this PCI I/O request
+ *
+ * Need keep same header layout with &struct acrn_pio_request.
+ */
+struct acrn_pci_request {
+	__u32	direction;
+	__u32	reserved[3];
+	__u64	size;
+	__u32	value;
+	__u32	bus;
+	__u32	dev;
+	__u32	func;
+	__u32	reg;
+};
+
+/**
+ * struct acrn_io_request - 256-byte ACRN I/O request
+ * @type:		Type of this request (ACRN_IOREQ_TYPE_*).
+ * @completion_polling:	Polling flag. Hypervisor will poll completion of the
+ *			I/O request if this flag set.
+ * @reserved0:		Reserved fields.
+ * @reqs:		Union of different types of request. Byte offset: 64.
+ * @reqs.pio_request:	PIO request data of the I/O request.
+ * @reqs.pci_request:	PCI configuration space request data of the I/O request.
+ * @reqs.mmio_request:	MMIO request data of the I/O request.
+ * @reqs.data:		Raw data of the I/O request.
+ * @reserved1:		Reserved fields.
+ * @kernel_handled:	Flag indicates this request need be handled in kernel.
+ * @processed:		The status of this request (ACRN_IOREQ_STATE_*).
+ *
+ * The state transitions of ACRN I/O request:
+ *
+ *    FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ...
+ *
+ * An I/O request in COMPLETE or FREE state is owned by the hypervisor. HSM and
+ * ACRN userspace are in charge of processing the others.
+ *
+ * On basis of the states illustrated above, a typical lifecycle of ACRN IO
+ * request would look like:
+ *
+ * Flow                 (assume the initial state is FREE)
+ * |
+ * |   Service VM vCPU 0     Service VM vCPU x      User vCPU y
+ * |
+ * |                                             hypervisor:
+ * |                                               fills in type, addr, etc.
+ * |                                               pauses the User VM vCPU y
+ * |                                               sets the state to PENDING (a)
+ * |                                               fires an upcall to Service VM
+ * |
+ * | HSM:
+ * |  scans for PENDING requests
+ * |  sets the states to PROCESSING (b)
+ * |  assigns the requests to clients (c)
+ * V
+ * |                     client:
+ * |                       scans for the assigned requests
+ * |                       handles the requests (d)
+ * |                     HSM:
+ * |                       sets states to COMPLETE
+ * |                       notifies the hypervisor
+ * |
+ * |                     hypervisor:
+ * |                       resumes User VM vCPU y (e)
+ * |
+ * |                                             hypervisor:
+ * |                                               post handling (f)
+ * V                                               sets states to FREE
+ *
+ * Note that the procedures (a) to (f) in the illustration above require to be
+ * strictly processed in the order.  One vCPU cannot trigger another request of
+ * I/O emulation before completing the previous one.
+ *
+ * Atomic and barriers are required when HSM and hypervisor accessing the state
+ * of &struct acrn_io_request.
+ *
+ */
+struct acrn_io_request {
+	__u32	type;
+	__u32	completion_polling;
+	__u32	reserved0[14];
+	union {
+		struct acrn_pio_request		pio_request;
+		struct acrn_pci_request		pci_request;
+		struct acrn_mmio_request	mmio_request;
+		__u64				data[8];
+	} reqs;
+	__u32	reserved1;
+	__u32	kernel_handled;
+	__u32	processed;
+} __attribute__((aligned(256)));
+
+struct acrn_io_request_buffer {
+	union {
+		struct acrn_io_request	req_slot[ACRN_IO_REQUEST_MAX];
+		__u8			reserved[4096];
+	};
+};
+
+/**
+ * struct acrn_ioreq_notify - The structure of ioreq completion notification
+ * @vmid:	User VM ID
+ * @reserved:	Reserved and should be 0
+ * @vcpu:	vCPU ID
+ */
+struct acrn_ioreq_notify {
+	__u16	vmid;
+	__u16	reserved;
+	__u32	vcpu;
+};
+
+/**
+ * struct acrn_vm_creation - Info to create a User VM
+ * @vmid:		User VM ID returned from the hypervisor
+ * @reserved0:		Reserved and must be 0
+ * @vcpu_num:		Number of vCPU in the VM. Return from hypervisor.
+ * @reserved1:		Reserved and must be 0
+ * @uuid:		UUID of the VM. Pass to hypervisor directly.
+ * @vm_flag:		Flag of the VM creating. Pass to hypervisor directly.
+ * @ioreq_buf:		Service VM GPA of I/O request buffer. Pass to
+ *			hypervisor directly.
+ * @cpu_affinity:	CPU affinity of the VM. Pass to hypervisor directly.
+ * 			It's a bitmap which indicates CPUs used by the VM.
+ */
+struct acrn_vm_creation {
+	__u16	vmid;
+	__u16	reserved0;
+	__u16	vcpu_num;
+	__u16	reserved1;
+	guid_t	uuid;
+	__u64	vm_flag;
+	__u64	ioreq_buf;
+	__u64	cpu_affinity;
+};
+
+/**
+ * struct acrn_gp_regs - General registers of a User VM
+ * @rax:	Value of register RAX
+ * @rcx:	Value of register RCX
+ * @rdx:	Value of register RDX
+ * @rbx:	Value of register RBX
+ * @rsp:	Value of register RSP
+ * @rbp:	Value of register RBP
+ * @rsi:	Value of register RSI
+ * @rdi:	Value of register RDI
+ * @r8:		Value of register R8
+ * @r9:		Value of register R9
+ * @r10:	Value of register R10
+ * @r11:	Value of register R11
+ * @r12:	Value of register R12
+ * @r13:	Value of register R13
+ * @r14:	Value of register R14
+ * @r15:	Value of register R15
+ */
+struct acrn_gp_regs {
+	__le64	rax;
+	__le64	rcx;
+	__le64	rdx;
+	__le64	rbx;
+	__le64	rsp;
+	__le64	rbp;
+	__le64	rsi;
+	__le64	rdi;
+	__le64	r8;
+	__le64	r9;
+	__le64	r10;
+	__le64	r11;
+	__le64	r12;
+	__le64	r13;
+	__le64	r14;
+	__le64	r15;
+};
+
+/**
+ * struct acrn_descriptor_ptr - Segment descriptor table of a User VM.
+ * @limit:	Limit field.
+ * @base:	Base field.
+ * @reserved:	Reserved and must be 0.
+ */
+struct acrn_descriptor_ptr {
+	__le16	limit;
+	__le64	base;
+	__le16	reserved[3];
+} __attribute__ ((__packed__));
+
+/**
+ * struct acrn_regs - Registers structure of a User VM
+ * @gprs:		General registers
+ * @gdt:		Global Descriptor Table
+ * @idt:		Interrupt Descriptor Table
+ * @rip:		Value of register RIP
+ * @cs_base:		Base of code segment selector
+ * @cr0:		Value of register CR0
+ * @cr4:		Value of register CR4
+ * @cr3:		Value of register CR3
+ * @ia32_efer:		Value of IA32_EFER MSR
+ * @rflags:		Value of regsiter RFLAGS
+ * @reserved_64:	Reserved and must be 0
+ * @cs_ar:		Attribute field of code segment selector
+ * @cs_limit:		Limit field of code segment selector
+ * @reserved_32:	Reserved and must be 0
+ * @cs_sel:		Value of code segment selector
+ * @ss_sel:		Value of stack segment selector
+ * @ds_sel:		Value of data segment selector
+ * @es_sel:		Value of extra segment selector
+ * @fs_sel:		Value of FS selector
+ * @gs_sel:		Value of GS selector
+ * @ldt_sel:		Value of LDT descriptor selector
+ * @tr_sel:		Value of TSS descriptor selector
+ */
+struct acrn_regs {
+	struct acrn_gp_regs		gprs;
+	struct acrn_descriptor_ptr	gdt;
+	struct acrn_descriptor_ptr	idt;
+
+	__le64				rip;
+	__le64				cs_base;
+	__le64				cr0;
+	__le64				cr4;
+	__le64				cr3;
+	__le64				ia32_efer;
+	__le64				rflags;
+	__le64				reserved_64[4];
+
+	__le32				cs_ar;
+	__le32				cs_limit;
+	__le32				reserved_32[3];
+
+	__le16				cs_sel;
+	__le16				ss_sel;
+	__le16				ds_sel;
+	__le16				es_sel;
+	__le16				fs_sel;
+	__le16				gs_sel;
+	__le16				ldt_sel;
+	__le16				tr_sel;
+};
+
+/**
+ * struct acrn_vcpu_regs - Info of vCPU registers state
+ * @vcpu_id:	vCPU ID
+ * @reserved:	Reserved and must be 0
+ * @vcpu_regs:	vCPU registers state
+ *
+ * This structure will be passed to hypervisor directly.
+ */
+struct acrn_vcpu_regs {
+	__u16			vcpu_id;
+	__u16			reserved[3];
+	struct acrn_regs	vcpu_regs;
+};
+
+#define	ACRN_MEM_ACCESS_RIGHT_MASK	0x00000007U
+#define	ACRN_MEM_ACCESS_READ		0x00000001U
+#define	ACRN_MEM_ACCESS_WRITE		0x00000002U
+#define	ACRN_MEM_ACCESS_EXEC		0x00000004U
+#define	ACRN_MEM_ACCESS_RWX		(ACRN_MEM_ACCESS_READ  | \
+					 ACRN_MEM_ACCESS_WRITE | \
+					 ACRN_MEM_ACCESS_EXEC)
+
+#define	ACRN_MEM_TYPE_MASK		0x000007C0U
+#define	ACRN_MEM_TYPE_WB		0x00000040U
+#define	ACRN_MEM_TYPE_WT		0x00000080U
+#define	ACRN_MEM_TYPE_UC		0x00000100U
+#define	ACRN_MEM_TYPE_WC		0x00000200U
+#define	ACRN_MEM_TYPE_WP		0x00000400U
+
+/* Memory mapping types */
+#define	ACRN_MEMMAP_RAM			0
+#define	ACRN_MEMMAP_MMIO		1
+
+/**
+ * struct acrn_vm_memmap - A EPT memory mapping info for a User VM.
+ * @type:		Type of the memory mapping (ACRM_MEMMAP_*).
+ *			Pass to hypervisor directly.
+ * @attr:		Attribute of the memory mapping.
+ *			Pass to hypervisor directly.
+ * @user_vm_pa:		Physical address of User VM.
+ *			Pass to hypervisor directly.
+ * @service_vm_pa:	Physical address of Service VM.
+ *			Pass to hypervisor directly.
+ * @vma_base:		VMA address of Service VM. Pass to hypervisor directly.
+ * @len:		Length of the memory mapping.
+ *			Pass to hypervisor directly.
+ */
+struct acrn_vm_memmap {
+	__u32	type;
+	__u32	attr;
+	__u64	user_vm_pa;
+	union {
+		__u64	service_vm_pa;
+		__u64	vma_base;
+	};
+	__u64	len;
+};
+
+/* Type of interrupt of a passthrough device */
+#define ACRN_PTDEV_IRQ_INTX	0
+#define ACRN_PTDEV_IRQ_MSI	1
+#define ACRN_PTDEV_IRQ_MSIX	2
+/**
+ * struct acrn_ptdev_irq - Interrupt data of a passthrough device.
+ * @type:		Type (ACRN_PTDEV_IRQ_*)
+ * @virt_bdf:		Virtual Bus/Device/Function
+ * @phys_bdf:		Physical Bus/Device/Function
+ * @intx:		Info of interrupt
+ * @intx.virt_pin:	Virtual IOAPIC pin
+ * @intx.phys_pin:	Physical IOAPIC pin
+ * @intx.is_pic_pin:	Is PIC pin or not
+ *
+ * This structure will be passed to hypervisor directly.
+ */
+struct acrn_ptdev_irq {
+	__u32	type;
+	__u16	virt_bdf;
+	__u16	phys_bdf;
+
+	struct {
+		__u32	virt_pin;
+		__u32	phys_pin;
+		__u32	is_pic_pin;
+	} intx;
+};
+
+/* Type of PCI device assignment */
+#define ACRN_PTDEV_QUIRK_ASSIGN	(1U << 0)
+
+#define ACRN_PCI_NUM_BARS	6
+/**
+ * struct acrn_pcidev - Info for assigning or de-assigning a PCI device
+ * @type:	Type of the assignment
+ * @virt_bdf:	Virtual Bus/Device/Function
+ * @phys_bdf:	Physical Bus/Device/Function
+ * @intr_line:	PCI interrupt line
+ * @intr_pin:	PCI interrupt pin
+ * @bar:	PCI BARs.
+ *
+ * This structure will be passed to hypervisor directly.
+ */
+struct acrn_pcidev {
+	__u32	type;
+	__u16	virt_bdf;
+	__u16	phys_bdf;
+	__u8	intr_line;
+	__u8	intr_pin;
+	__u32	bar[ACRN_PCI_NUM_BARS];
+};
+
+/**
+ * struct acrn_msi_entry - Info for injecting a MSI interrupt to a VM
+ * @msi_addr:	MSI addr[19:12] with dest vCPU ID
+ * @msi_data:	MSI data[7:0] with vector
+ */
+struct acrn_msi_entry {
+	__u64	msi_addr;
+	__u64	msi_data;
+};
+
+struct acrn_acpi_generic_address {
+	__u8	space_id;
+	__u8	bit_width;
+	__u8	bit_offset;
+	__u8	access_size;
+	__u64	address;
+} __attribute__ ((__packed__));
+
+/**
+ * struct acrn_cstate_data - A C state package defined in ACPI
+ * @cx_reg:	Register of the C state object
+ * @type:	Type of the C state object
+ * @latency:	The worst-case latency to enter and exit this C state
+ * @power:	The average power consumption when in this C state
+ */
+struct acrn_cstate_data {
+	struct acrn_acpi_generic_address	cx_reg;
+	__u8					type;
+	__u32					latency;
+	__u64					power;
+};
+
+/**
+ * struct acrn_pstate_data - A P state package defined in ACPI
+ * @core_frequency:	CPU frequency (in MHz).
+ * @power:		Power dissipation (in milliwatts).
+ * @transition_latency:	The worst-case latency in microseconds that CPU is
+ * 			unavailable during a transition from any P state to
+ * 			this P state.
+ * @bus_master_latency:	The worst-case latency in microseconds that Bus Masters
+ * 			are prevented from accessing memory during a transition
+ * 			from any P state to this P state.
+ * @control:		The value to be written to Performance Control Register
+ * @status:		Transition status.
+ */
+struct acrn_pstate_data {
+	__u64	core_frequency;
+	__u64	power;
+	__u64	transition_latency;
+	__u64	bus_master_latency;
+	__u64	control;
+	__u64	status;
+};
+
+#define PMCMD_TYPE_MASK		0x000000ff
+enum acrn_pm_cmd_type {
+	ACRN_PMCMD_GET_PX_CNT,
+	ACRN_PMCMD_GET_PX_DATA,
+	ACRN_PMCMD_GET_CX_CNT,
+	ACRN_PMCMD_GET_CX_DATA,
+};
+
+#define ACRN_IOEVENTFD_FLAG_PIO		0x01
+#define ACRN_IOEVENTFD_FLAG_DATAMATCH	0x02
+#define ACRN_IOEVENTFD_FLAG_DEASSIGN	0x04
+/**
+ * struct acrn_ioeventfd - Data to operate a &struct hsm_ioeventfd
+ * @fd:		The fd of eventfd associated with a hsm_ioeventfd
+ * @flags:	Logical-OR of ACRN_IOEVENTFD_FLAG_*
+ * @addr:	The start address of IO range of ioeventfd
+ * @len:	The length of IO range of ioeventfd
+ * @reserved:	Reserved and should be 0
+ * @data:	Data for data matching
+ *
+ * Without flag ACRN_IOEVENTFD_FLAG_DEASSIGN, ioctl ACRN_IOCTL_IOEVENTFD
+ * creates a &struct hsm_ioeventfd with properties originated from &struct
+ * acrn_ioeventfd. With flag ACRN_IOEVENTFD_FLAG_DEASSIGN, ioctl
+ * ACRN_IOCTL_IOEVENTFD destroys the &struct hsm_ioeventfd matching the fd.
+ */
+struct acrn_ioeventfd {
+	__u32	fd;
+	__u32	flags;
+	__u64	addr;
+	__u32	len;
+	__u32	reserved;
+	__u64	data;
+};
+
+#define ACRN_IRQFD_FLAG_DEASSIGN	0x01
+/**
+ * struct acrn_irqfd - Data to operate a &struct hsm_irqfd
+ * @fd:		The fd of eventfd associated with a hsm_irqfd
+ * @flags:	Logical-OR of ACRN_IRQFD_FLAG_*
+ * @msi:	Info of MSI associated with the irqfd
+ */
+struct acrn_irqfd {
+	__s32			fd;
+	__u32			flags;
+	struct acrn_msi_entry	msi;
+};
+
+/* The ioctl type, documented in ioctl-number.rst */
+#define ACRN_IOCTL_TYPE			0xA2
+
+/*
+ * Common IOCTL IDs definition for ACRN userspace
+ */
+#define ACRN_IOCTL_CREATE_VM		\
+	_IOWR(ACRN_IOCTL_TYPE, 0x10, struct acrn_vm_creation)
+#define ACRN_IOCTL_DESTROY_VM		\
+	_IO(ACRN_IOCTL_TYPE, 0x11)
+#define ACRN_IOCTL_START_VM		\
+	_IO(ACRN_IOCTL_TYPE, 0x12)
+#define ACRN_IOCTL_PAUSE_VM		\
+	_IO(ACRN_IOCTL_TYPE, 0x13)
+#define ACRN_IOCTL_RESET_VM		\
+	_IO(ACRN_IOCTL_TYPE, 0x15)
+#define ACRN_IOCTL_SET_VCPU_REGS	\
+	_IOW(ACRN_IOCTL_TYPE, 0x16, struct acrn_vcpu_regs)
+
+#define ACRN_IOCTL_INJECT_MSI		\
+	_IOW(ACRN_IOCTL_TYPE, 0x23, struct acrn_msi_entry)
+#define ACRN_IOCTL_VM_INTR_MONITOR	\
+	_IOW(ACRN_IOCTL_TYPE, 0x24, unsigned long)
+#define ACRN_IOCTL_SET_IRQLINE		\
+	_IOW(ACRN_IOCTL_TYPE, 0x25, __u64)
+
+#define ACRN_IOCTL_NOTIFY_REQUEST_FINISH \
+	_IOW(ACRN_IOCTL_TYPE, 0x31, struct acrn_ioreq_notify)
+#define ACRN_IOCTL_CREATE_IOREQ_CLIENT	\
+	_IO(ACRN_IOCTL_TYPE, 0x32)
+#define ACRN_IOCTL_ATTACH_IOREQ_CLIENT	\
+	_IO(ACRN_IOCTL_TYPE, 0x33)
+#define ACRN_IOCTL_DESTROY_IOREQ_CLIENT	\
+	_IO(ACRN_IOCTL_TYPE, 0x34)
+#define ACRN_IOCTL_CLEAR_VM_IOREQ	\
+	_IO(ACRN_IOCTL_TYPE, 0x35)
+
+#define ACRN_IOCTL_SET_MEMSEG		\
+	_IOW(ACRN_IOCTL_TYPE, 0x41, struct acrn_vm_memmap)
+#define ACRN_IOCTL_UNSET_MEMSEG		\
+	_IOW(ACRN_IOCTL_TYPE, 0x42, struct acrn_vm_memmap)
+
+#define ACRN_IOCTL_SET_PTDEV_INTR	\
+	_IOW(ACRN_IOCTL_TYPE, 0x53, struct acrn_ptdev_irq)
+#define ACRN_IOCTL_RESET_PTDEV_INTR	\
+	_IOW(ACRN_IOCTL_TYPE, 0x54, struct acrn_ptdev_irq)
+#define ACRN_IOCTL_ASSIGN_PCIDEV	\
+	_IOW(ACRN_IOCTL_TYPE, 0x55, struct acrn_pcidev)
+#define ACRN_IOCTL_DEASSIGN_PCIDEV	\
+	_IOW(ACRN_IOCTL_TYPE, 0x56, struct acrn_pcidev)
+
+#define ACRN_IOCTL_PM_GET_CPU_STATE	\
+	_IOWR(ACRN_IOCTL_TYPE, 0x60, __u64)
+
+#define ACRN_IOCTL_IOEVENTFD		\
+	_IOW(ACRN_IOCTL_TYPE, 0x70, struct acrn_ioeventfd)
+#define ACRN_IOCTL_IRQFD		\
+	_IOW(ACRN_IOCTL_TYPE, 0x71, struct acrn_irqfd)
+
+#endif /* _UAPI_ACRN_H */
diff --git a/original/uapi/linux/batadv_packet.h b/original/uapi/linux/batadv_packet.h
index 9c8604c..ea4692c 100644
--- a/original/uapi/linux/batadv_packet.h
+++ b/original/uapi/linux/batadv_packet.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) */
-/* Copyright (C) 2007-2020  B.A.T.M.A.N. contributors:
+/* Copyright (C) B.A.T.M.A.N. contributors:
  *
  * Marek Lindner, Simon Wunderlich
  */
diff --git a/original/uapi/linux/batman_adv.h b/original/uapi/linux/batman_adv.h
index bdb317f..35dc016 100644
--- a/original/uapi/linux/batman_adv.h
+++ b/original/uapi/linux/batman_adv.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: MIT */
-/* Copyright (C) 2016-2020  B.A.T.M.A.N. contributors:
+/* Copyright (C) B.A.T.M.A.N. contributors:
  *
  * Matthias Schiffer
  */
diff --git a/original/uapi/linux/binfmts.h b/original/uapi/linux/binfmts.h
index 689025d..c6f9450 100644
--- a/original/uapi/linux/binfmts.h
+++ b/original/uapi/linux/binfmts.h
@@ -18,4 +18,8 @@
 /* sizeof(linux_binprm->buf) */
 #define BINPRM_BUF_SIZE 256
 
+/* preserve argv0 for the interpreter  */
+#define AT_FLAGS_PRESERVE_ARGV0_BIT 0
+#define AT_FLAGS_PRESERVE_ARGV0 (1 << AT_FLAGS_PRESERVE_ARGV0_BIT)
+
 #endif /* _UAPI_LINUX_BINFMTS_H */
diff --git a/original/uapi/linux/blkpg.h b/original/uapi/linux/blkpg.h
index ac6474e..d0a64ee 100644
--- a/original/uapi/linux/blkpg.h
+++ b/original/uapi/linux/blkpg.h
@@ -2,29 +2,6 @@
 #ifndef _UAPI__LINUX_BLKPG_H
 #define _UAPI__LINUX_BLKPG_H
 
-/*
- * Partition table and disk geometry handling
- *
- * A single ioctl with lots of subfunctions:
- *
- * Device number stuff:
- *    get_whole_disk()		(given the device number of a partition,
- *                               find the device number of the encompassing disk)
- *    get_all_partitions()	(given the device number of a disk, return the
- *				 device numbers of all its known partitions)
- *
- * Partition stuff:
- *    add_partition()
- *    delete_partition()
- *    test_partition_in_use()	(also for test_disk_in_use)
- *
- * Geometry stuff:
- *    get_geometry()
- *    set_geometry()
- *    get_bios_drivedata()
- *
- * For today, only the partition stuff - aeb, 990515
- */
 #include <linux/compiler.h>
 #include <linux/ioctl.h>
 
@@ -52,9 +29,8 @@
 	long long start;		/* starting offset in bytes */
 	long long length;		/* length in bytes */
 	int pno;			/* partition number */
-	char devname[BLKPG_DEVNAMELTH];	/* partition name, like sda5 or c0d1p2,
-					   to be used in kernel messages */
-	char volname[BLKPG_VOLNAMELTH];	/* volume label */
+	char devname[BLKPG_DEVNAMELTH];	/* unused / ignored */
+	char volname[BLKPG_VOLNAMELTH];	/* unused / ignore */
 };
 
 #endif /* _UAPI__LINUX_BLKPG_H */
diff --git a/original/uapi/linux/bpf.h b/original/uapi/linux/bpf.h
index 77d7c1b..4ba4ef0 100644
--- a/original/uapi/linux/bpf.h
+++ b/original/uapi/linux/bpf.h
@@ -19,7 +19,8 @@
 
 /* ld/ldx fields */
 #define BPF_DW		0x18	/* double word (64-bit) */
-#define BPF_XADD	0xc0	/* exclusive add */
+#define BPF_ATOMIC	0xc0	/* atomic memory ops - op type in immediate */
+#define BPF_XADD	0xc0	/* exclusive add - legacy name */
 
 /* alu/jmp fields */
 #define BPF_MOV		0xb0	/* mov reg to reg */
@@ -43,6 +44,11 @@
 #define BPF_CALL	0x80	/* function call */
 #define BPF_EXIT	0x90	/* function return */
 
+/* atomic op type fields (stored in immediate) */
+#define BPF_FETCH	0x01	/* not an opcode on its own, used to build others */
+#define BPF_XCHG	(0xe0 | BPF_FETCH)	/* atomic exchange */
+#define BPF_CMPXCHG	(0xf0 | BPF_FETCH)	/* atomic compare-and-write */
+
 /* Register numbers */
 enum {
 	BPF_REG_0 = 0,
@@ -1650,22 +1656,30 @@
  * 		networking traffic statistics as it provides a global socket
  * 		identifier that can be assumed unique.
  * 	Return
- * 		A 8-byte long non-decreasing number on success, or 0 if the
- * 		socket field is missing inside *skb*.
+ * 		A 8-byte long unique number on success, or 0 if the socket
+ * 		field is missing inside *skb*.
  *
  * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx)
  * 	Description
  * 		Equivalent to bpf_get_socket_cookie() helper that accepts
  * 		*skb*, but gets socket from **struct bpf_sock_addr** context.
  * 	Return
- * 		A 8-byte long non-decreasing number.
+ * 		A 8-byte long unique number.
  *
  * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx)
  * 	Description
  * 		Equivalent to **bpf_get_socket_cookie**\ () helper that accepts
  * 		*skb*, but gets socket from **struct bpf_sock_ops** context.
  * 	Return
- * 		A 8-byte long non-decreasing number.
+ * 		A 8-byte long unique number.
+ *
+ * u64 bpf_get_socket_cookie(struct sock *sk)
+ * 	Description
+ * 		Equivalent to **bpf_get_socket_cookie**\ () helper that accepts
+ * 		*sk*, but gets socket from a BTF **struct sock**. This helper
+ * 		also works for sleepable programs.
+ * 	Return
+ * 		A 8-byte long unique number or 0 if *sk* is NULL.
  *
  * u32 bpf_get_socket_uid(struct sk_buff *skb)
  * 	Return
@@ -2225,6 +2239,9 @@
  *		* > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the
  *		  packet is not forwarded or needs assist from full stack
  *
+ *		If lookup fails with BPF_FIB_LKUP_RET_FRAG_NEEDED, then the MTU
+ *		was exceeded and output params->mtu_result contains the MTU.
+ *
  * long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
  *	Description
  *		Add an entry to, or update a sockhash *map* referencing sockets.
@@ -2448,7 +2465,7 @@
  *		running simultaneously.
  *
  *		A user should care about the synchronization by himself.
- *		For example, by using the **BPF_STX_XADD** instruction to alter
+ *		For example, by using the **BPF_ATOMIC** instructions to alter
  *		the shared data.
  *	Return
  *		A pointer to the local storage area.
@@ -2993,10 +3010,10 @@
  * 		string length is larger than *size*, just *size*-1 bytes are
  * 		copied and the last byte is set to NUL.
  *
- * 		On success, the length of the copied string is returned. This
- * 		makes this helper useful in tracing programs for reading
- * 		strings, and more importantly to get its length at runtime. See
- * 		the following snippet:
+ * 		On success, returns the number of bytes that were written,
+ * 		including the terminal NUL. This makes this helper useful in
+ * 		tracing programs for reading strings, and more importantly to
+ * 		get its length at runtime. See the following snippet:
  *
  * 		::
  *
@@ -3024,7 +3041,7 @@
  * 		**->mm->env_start**: using this helper and the return value,
  * 		one can quickly iterate at the right offset of the memory area.
  * 	Return
- * 		On success, the strictly positive length of the string,
+ * 		On success, the strictly positive length of the output string,
  * 		including the trailing NUL character. On error, a negative
  * 		value.
  *
@@ -3830,6 +3847,74 @@
  *	Return
  *		A pointer to a struct socket on success or NULL if the file is
  *		not a socket.
+ *
+ * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags)
+ *	Description
+ *		Check packet size against exceeding MTU of net device (based
+ *		on *ifindex*).  This helper will likely be used in combination
+ *		with helpers that adjust/change the packet size.
+ *
+ *		The argument *len_diff* can be used for querying with a planned
+ *		size change. This allows to check MTU prior to changing packet
+ *		ctx. Providing an *len_diff* adjustment that is larger than the
+ *		actual packet size (resulting in negative packet size) will in
+ *		principle not exceed the MTU, why it is not considered a
+ *		failure.  Other BPF-helpers are needed for performing the
+ *		planned size change, why the responsability for catch a negative
+ *		packet size belong in those helpers.
+ *
+ *		Specifying *ifindex* zero means the MTU check is performed
+ *		against the current net device.  This is practical if this isn't
+ *		used prior to redirect.
+ *
+ *		On input *mtu_len* must be a valid pointer, else verifier will
+ *		reject BPF program.  If the value *mtu_len* is initialized to
+ *		zero then the ctx packet size is use.  When value *mtu_len* is
+ *		provided as input this specify the L3 length that the MTU check
+ *		is done against. Remember XDP and TC length operate at L2, but
+ *		this value is L3 as this correlate to MTU and IP-header tot_len
+ *		values which are L3 (similar behavior as bpf_fib_lookup).
+ *
+ *		The Linux kernel route table can configure MTUs on a more
+ *		specific per route level, which is not provided by this helper.
+ *		For route level MTU checks use the **bpf_fib_lookup**\ ()
+ *		helper.
+ *
+ *		*ctx* is either **struct xdp_md** for XDP programs or
+ *		**struct sk_buff** for tc cls_act programs.
+ *
+ *		The *flags* argument can be a combination of one or more of the
+ *		following values:
+ *
+ *		**BPF_MTU_CHK_SEGS**
+ *			This flag will only works for *ctx* **struct sk_buff**.
+ *			If packet context contains extra packet segment buffers
+ *			(often knows as GSO skb), then MTU check is harder to
+ *			check at this point, because in transmit path it is
+ *			possible for the skb packet to get re-segmented
+ *			(depending on net device features).  This could still be
+ *			a MTU violation, so this flag enables performing MTU
+ *			check against segments, with a different violation
+ *			return code to tell it apart. Check cannot use len_diff.
+ *
+ *		On return *mtu_len* pointer contains the MTU value of the net
+ *		device.  Remember the net device configured MTU is the L3 size,
+ *		which is returned here and XDP and TC length operate at L2.
+ *		Helper take this into account for you, but remember when using
+ *		MTU value in your BPF-code.
+ *
+ *	Return
+ *		* 0 on success, and populate MTU value in *mtu_len* pointer.
+ *
+ *		* < 0 if any input argument is invalid (*mtu_len* not updated)
+ *
+ *		MTU violations return positive values, but also populate MTU
+ *		value in *mtu_len* pointer, as this can be needed for
+ *		implementing PMTU handing:
+ *
+ *		* **BPF_MTU_CHK_RET_FRAG_NEEDED**
+ *		* **BPF_MTU_CHK_RET_SEGS_TOOBIG**
+ *
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -3995,6 +4080,7 @@
 	FN(ktime_get_coarse_ns),	\
 	FN(ima_inode_hash),		\
 	FN(sock_from_file),		\
+	FN(check_mtu),			\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
@@ -4495,6 +4581,7 @@
 	__aligned_u64 prog_tags;
 	__u64 run_time_ns;
 	__u64 run_cnt;
+	__u64 recursion_misses;
 } __attribute__((aligned(8)));
 
 struct bpf_map_info {
@@ -4975,9 +5062,13 @@
 	__be16	sport;
 	__be16	dport;
 
-	/* total length of packet from network header - used for MTU check */
-	__u16	tot_len;
+	union {	/* used for MTU check */
+		/* input to lookup */
+		__u16	tot_len; /* L3 length from network hdr (iph->tot_len) */
 
+		/* output: MTU value */
+		__u16	mtu_result;
+	};
 	/* input: L3 device index for lookup
 	 * output: device index from FIB lookup
 	 */
@@ -5023,6 +5114,17 @@
 	};
 };
 
+/* bpf_check_mtu flags*/
+enum  bpf_check_mtu_flags {
+	BPF_MTU_CHK_SEGS  = (1U << 0),
+};
+
+enum bpf_check_mtu_ret {
+	BPF_MTU_CHK_RET_SUCCESS,      /* check and lookup successful */
+	BPF_MTU_CHK_RET_FRAG_NEEDED,  /* fragmentation required to fwd */
+	BPF_MTU_CHK_RET_SEGS_TOOBIG,  /* GSO re-segmentation needed to fwd */
+};
+
 enum bpf_task_fd_type {
 	BPF_FD_TYPE_RAW_TRACEPOINT,	/* tp name */
 	BPF_FD_TYPE_TRACEPOINT,		/* tp name */
diff --git a/original/uapi/linux/can.h b/original/uapi/linux/can.h
index f75238a..c753535 100644
--- a/original/uapi/linux/can.h
+++ b/original/uapi/linux/can.h
@@ -113,7 +113,7 @@
 		 */
 		__u8 len;
 		__u8 can_dlc; /* deprecated */
-	};
+	} __attribute__((packed)); /* disable padding added in some ABIs */
 	__u8 __pad; /* padding */
 	__u8 __res0; /* reserved / padding */
 	__u8 len8_dlc; /* optional DLC for 8 byte payload length (9 .. 15) */
diff --git a/original/uapi/linux/capability.h b/original/uapi/linux/capability.h
index 395dd0d..741985d 100644
--- a/original/uapi/linux/capability.h
+++ b/original/uapi/linux/capability.h
@@ -333,7 +333,8 @@
 
 #define CAP_AUDIT_CONTROL    30
 
-/* Set or remove capabilities on files */
+/* Set or remove capabilities on files.
+   Map uid=0 into a child user namespace. */
 
 #define CAP_SETFCAP	     31
 
diff --git a/original/uapi/linux/ccs.h b/original/uapi/linux/ccs.h
new file mode 100644
index 0000000..2896d3b
--- /dev/null
+++ b/original/uapi/linux/ccs.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+/* Copyright (C) 2020 Intel Corporation */
+
+#ifndef __UAPI_CCS_H__
+#define __UAPI_CCS_H__
+
+#include <linux/v4l2-controls.h>
+
+#define V4L2_CID_CCS_ANALOGUE_GAIN_M0		(V4L2_CID_USER_CCS_BASE + 1)
+#define V4L2_CID_CCS_ANALOGUE_GAIN_C0		(V4L2_CID_USER_CCS_BASE + 2)
+#define V4L2_CID_CCS_ANALOGUE_GAIN_M1		(V4L2_CID_USER_CCS_BASE + 3)
+#define V4L2_CID_CCS_ANALOGUE_GAIN_C1		(V4L2_CID_USER_CCS_BASE + 4)
+#define V4L2_CID_CCS_ANALOGUE_LINEAR_GAIN	(V4L2_CID_USER_CCS_BASE + 5)
+#define V4L2_CID_CCS_ANALOGUE_EXPONENTIAL_GAIN	(V4L2_CID_USER_CCS_BASE + 6)
+#define V4L2_CID_CCS_SHADING_CORRECTION		(V4L2_CID_USER_CCS_BASE + 8)
+#define V4L2_CID_CCS_LUMINANCE_CORRECTION_LEVEL	(V4L2_CID_USER_CCS_BASE + 9)
+
+#endif
diff --git a/original/uapi/linux/cxl_mem.h b/original/uapi/linux/cxl_mem.h
new file mode 100644
index 0000000..3155382
--- /dev/null
+++ b/original/uapi/linux/cxl_mem.h
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * CXL IOCTLs for Memory Devices
+ */
+
+#ifndef _UAPI_CXL_MEM_H_
+#define _UAPI_CXL_MEM_H_
+
+#include <linux/types.h>
+
+/**
+ * DOC: UAPI
+ *
+ * Not all of all commands that the driver supports are always available for use
+ * by userspace. Userspace must check the results from the QUERY command in
+ * order to determine the live set of commands.
+ */
+
+#define CXL_MEM_QUERY_COMMANDS _IOR(0xCE, 1, struct cxl_mem_query_commands)
+#define CXL_MEM_SEND_COMMAND _IOWR(0xCE, 2, struct cxl_send_command)
+
+#define CXL_CMDS                                                          \
+	___C(INVALID, "Invalid Command"),                                 \
+	___C(IDENTIFY, "Identify Command"),                               \
+	___C(RAW, "Raw device command"),                                  \
+	___C(GET_SUPPORTED_LOGS, "Get Supported Logs"),                   \
+	___C(GET_FW_INFO, "Get FW Info"),                                 \
+	___C(GET_PARTITION_INFO, "Get Partition Information"),            \
+	___C(GET_LSA, "Get Label Storage Area"),                          \
+	___C(GET_HEALTH_INFO, "Get Health Info"),                         \
+	___C(GET_LOG, "Get Log"),                                         \
+	___C(MAX, "invalid / last command")
+
+#define ___C(a, b) CXL_MEM_COMMAND_ID_##a
+enum { CXL_CMDS };
+
+#undef ___C
+#define ___C(a, b) { b }
+static const struct {
+	const char *name;
+} cxl_command_names[] = { CXL_CMDS };
+
+/*
+ * Here's how this actually breaks out:
+ * cxl_command_names[] = {
+ *	[CXL_MEM_COMMAND_ID_INVALID] = { "Invalid Command" },
+ *	[CXL_MEM_COMMAND_ID_IDENTIFY] = { "Identify Command" },
+ *	...
+ *	[CXL_MEM_COMMAND_ID_MAX] = { "invalid / last command" },
+ * };
+ */
+
+#undef ___C
+
+/**
+ * struct cxl_command_info - Command information returned from a query.
+ * @id: ID number for the command.
+ * @flags: Flags that specify command behavior.
+ * @size_in: Expected input size, or -1 if variable length.
+ * @size_out: Expected output size, or -1 if variable length.
+ *
+ * Represents a single command that is supported by both the driver and the
+ * hardware. This is returned as part of an array from the query ioctl. The
+ * following would be a command that takes a variable length input and returns 0
+ * bytes of output.
+ *
+ *  - @id = 10
+ *  - @flags = 0
+ *  - @size_in = -1
+ *  - @size_out = 0
+ *
+ * See struct cxl_mem_query_commands.
+ */
+struct cxl_command_info {
+	__u32 id;
+
+	__u32 flags;
+#define CXL_MEM_COMMAND_FLAG_MASK GENMASK(0, 0)
+
+	__s32 size_in;
+	__s32 size_out;
+};
+
+/**
+ * struct cxl_mem_query_commands - Query supported commands.
+ * @n_commands: In/out parameter. When @n_commands is > 0, the driver will
+ *		return min(num_support_commands, n_commands). When @n_commands
+ *		is 0, driver will return the number of total supported commands.
+ * @rsvd: Reserved for future use.
+ * @commands: Output array of supported commands. This array must be allocated
+ *            by userspace to be at least min(num_support_commands, @n_commands)
+ *
+ * Allow userspace to query the available commands supported by both the driver,
+ * and the hardware. Commands that aren't supported by either the driver, or the
+ * hardware are not returned in the query.
+ *
+ * Examples:
+ *
+ *  - { .n_commands = 0 } // Get number of supported commands
+ *  - { .n_commands = 15, .commands = buf } // Return first 15 (or less)
+ *    supported commands
+ *
+ *  See struct cxl_command_info.
+ */
+struct cxl_mem_query_commands {
+	/*
+	 * Input: Number of commands to return (space allocated by user)
+	 * Output: Number of commands supported by the driver/hardware
+	 *
+	 * If n_commands is 0, kernel will only return number of commands and
+	 * not try to populate commands[], thus allowing userspace to know how
+	 * much space to allocate
+	 */
+	__u32 n_commands;
+	__u32 rsvd;
+
+	struct cxl_command_info __user commands[]; /* out: supported commands */
+};
+
+/**
+ * struct cxl_send_command - Send a command to a memory device.
+ * @id: The command to send to the memory device. This must be one of the
+ *	commands returned by the query command.
+ * @flags: Flags for the command (input).
+ * @raw: Special fields for raw commands
+ * @raw.opcode: Opcode passed to hardware when using the RAW command.
+ * @raw.rsvd: Must be zero.
+ * @rsvd: Must be zero.
+ * @retval: Return value from the memory device (output).
+ * @in: Parameters associated with input payload.
+ * @in.size: Size of the payload to provide to the device (input).
+ * @in.rsvd: Must be zero.
+ * @in.payload: Pointer to memory for payload input, payload is little endian.
+ * @out: Parameters associated with output payload.
+ * @out.size: Size of the payload received from the device (input/output). This
+ *	      field is filled in by userspace to let the driver know how much
+ *	      space was allocated for output. It is populated by the driver to
+ *	      let userspace know how large the output payload actually was.
+ * @out.rsvd: Must be zero.
+ * @out.payload: Pointer to memory for payload output, payload is little endian.
+ *
+ * Mechanism for userspace to send a command to the hardware for processing. The
+ * driver will do basic validation on the command sizes. In some cases even the
+ * payload may be introspected. Userspace is required to allocate large enough
+ * buffers for size_out which can be variable length in certain situations.
+ */
+struct cxl_send_command {
+	__u32 id;
+	__u32 flags;
+	union {
+		struct {
+			__u16 opcode;
+			__u16 rsvd;
+		} raw;
+		__u32 rsvd;
+	};
+	__u32 retval;
+
+	struct {
+		__s32 size;
+		__u32 rsvd;
+		__u64 payload;
+	} in;
+
+	struct {
+		__s32 size;
+		__u32 rsvd;
+		__u64 payload;
+	} out;
+};
+
+#endif
diff --git a/original/uapi/linux/devlink.h b/original/uapi/linux/devlink.h
index cf89c31..f6008b2 100644
--- a/original/uapi/linux/devlink.h
+++ b/original/uapi/linux/devlink.h
@@ -200,6 +200,10 @@
 	DEVLINK_PORT_FLAVOUR_UNUSED, /* Port which exists in the switch, but
 				      * is not used in any way.
 				      */
+	DEVLINK_PORT_FLAVOUR_PCI_SF, /* Represents eswitch port
+				      * for the PCI SF. It is an internal
+				      * port that faces the PCI SF.
+				      */
 };
 
 enum devlink_param_cmode {
@@ -529,6 +533,7 @@
 	DEVLINK_ATTR_RELOAD_ACTION_INFO,        /* nested */
 	DEVLINK_ATTR_RELOAD_ACTION_STATS,       /* nested */
 
+	DEVLINK_ATTR_PORT_PCI_SF_NUMBER,	/* u32 */
 	/* add new attributes above here, update the policy in devlink.c */
 
 	__DEVLINK_ATTR_MAX,
@@ -578,9 +583,29 @@
 enum devlink_port_function_attr {
 	DEVLINK_PORT_FUNCTION_ATTR_UNSPEC,
 	DEVLINK_PORT_FUNCTION_ATTR_HW_ADDR,	/* binary */
+	DEVLINK_PORT_FN_ATTR_STATE,	/* u8 */
+	DEVLINK_PORT_FN_ATTR_OPSTATE,	/* u8 */
 
 	__DEVLINK_PORT_FUNCTION_ATTR_MAX,
 	DEVLINK_PORT_FUNCTION_ATTR_MAX = __DEVLINK_PORT_FUNCTION_ATTR_MAX - 1
 };
 
+enum devlink_port_fn_state {
+	DEVLINK_PORT_FN_STATE_INACTIVE,
+	DEVLINK_PORT_FN_STATE_ACTIVE,
+};
+
+/**
+ * enum devlink_port_fn_opstate - indicates operational state of the function
+ * @DEVLINK_PORT_FN_OPSTATE_ATTACHED: Driver is attached to the function.
+ * For graceful tear down of the function, after inactivation of the
+ * function, user should wait for operational state to turn DETACHED.
+ * @DEVLINK_PORT_FN_OPSTATE_DETACHED: Driver is detached from the function.
+ * It is safe to delete the port.
+ */
+enum devlink_port_fn_opstate {
+	DEVLINK_PORT_FN_OPSTATE_DETACHED,
+	DEVLINK_PORT_FN_OPSTATE_ATTACHED,
+};
+
 #endif /* _UAPI_LINUX_DEVLINK_H_ */
diff --git a/original/uapi/linux/dm-ioctl.h b/original/uapi/linux/dm-ioctl.h
index 4933b6b..fcff666 100644
--- a/original/uapi/linux/dm-ioctl.h
+++ b/original/uapi/linux/dm-ioctl.h
@@ -272,9 +272,9 @@
 #define DM_DEV_SET_GEOMETRY	_IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
 
 #define DM_VERSION_MAJOR	4
-#define DM_VERSION_MINOR	43
+#define DM_VERSION_MINOR	44
 #define DM_VERSION_PATCHLEVEL	0
-#define DM_VERSION_EXTRA	"-ioctl (2020-10-01)"
+#define DM_VERSION_EXTRA	"-ioctl (2021-02-01)"
 
 /* Status bits */
 #define DM_READONLY_FLAG	(1 << 0) /* In/Out */
diff --git a/original/uapi/linux/ethtool.h b/original/uapi/linux/ethtool.h
index cde753b..5afea69 100644
--- a/original/uapi/linux/ethtool.h
+++ b/original/uapi/linux/ethtool.h
@@ -26,6 +26,14 @@
  * have the same layout for 32-bit and 64-bit userland.
  */
 
+/* Note on reserved space.
+ * Reserved fields must not be accessed directly by user space because
+ * they may be replaced by a different field in the future. They must
+ * be initialized to zero before making the request, e.g. via memset
+ * of the entire structure or implicitly by not being set in a structure
+ * initializer.
+ */
+
 /**
  * struct ethtool_cmd - DEPRECATED, link control and status
  * This structure is DEPRECATED, please use struct ethtool_link_settings.
@@ -67,6 +75,7 @@
  *	and other link features that the link partner advertised
  *	through autonegotiation; 0 if unknown or not applicable.
  *	Read-only.
+ * @reserved: Reserved for future use; see the note on reserved space.
  *
  * The link speed in Mbps is split between @speed and @speed_hi.  Use
  * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to
@@ -155,6 +164,7 @@
  * @bus_info: Device bus address.  This should match the dev_name()
  *	string for the underlying bus device, if there is one.  May be
  *	an empty string.
+ * @reserved2: Reserved for future use; see the note on reserved space.
  * @n_priv_flags: Number of flags valid for %ETHTOOL_GPFLAGS and
  *	%ETHTOOL_SPFLAGS commands; also the number of strings in the
  *	%ETH_SS_PRIV_FLAGS set
@@ -356,6 +366,7 @@
  * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
  *	its tx lpi (after reaching 'idle' state). Effective only when eee
  *	was negotiated and tx_lpi_enabled was set.
+ * @reserved: Reserved for future use; see the note on reserved space.
  */
 struct ethtool_eee {
 	__u32	cmd;
@@ -374,6 +385,7 @@
  * @cmd: %ETHTOOL_GMODULEINFO
  * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
  * @eeprom_len: Length of the eeprom
+ * @reserved: Reserved for future use; see the note on reserved space.
  *
  * This structure is used to return the information to
  * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
@@ -579,9 +591,7 @@
 	__u32	tx_pause;
 };
 
-/**
- * enum ethtool_link_ext_state - link extended state
- */
+/* Link extended state */
 enum ethtool_link_ext_state {
 	ETHTOOL_LINK_EXT_STATE_AUTONEG,
 	ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE,
@@ -595,10 +605,7 @@
 	ETHTOOL_LINK_EXT_STATE_OVERHEAT,
 };
 
-/**
- * enum ethtool_link_ext_substate_autoneg - more information in addition to
- * ETHTOOL_LINK_EXT_STATE_AUTONEG.
- */
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */
 enum ethtool_link_ext_substate_autoneg {
 	ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED = 1,
 	ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED,
@@ -608,9 +615,7 @@
 	ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD,
 };
 
-/**
- * enum ethtool_link_ext_substate_link_training - more information in addition to
- * ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE.
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE.
  */
 enum ethtool_link_ext_substate_link_training {
 	ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED = 1,
@@ -619,9 +624,7 @@
 	ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT,
 };
 
-/**
- * enum ethtool_link_ext_substate_logical_mismatch - more information in addition
- * to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH.
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH.
  */
 enum ethtool_link_ext_substate_link_logical_mismatch {
 	ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK = 1,
@@ -631,19 +634,14 @@
 	ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED,
 };
 
-/**
- * enum ethtool_link_ext_substate_bad_signal_integrity - more information in
- * addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY.
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY.
  */
 enum ethtool_link_ext_substate_bad_signal_integrity {
 	ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1,
 	ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE,
 };
 
-/**
- * enum ethtool_link_ext_substate_cable_issue - more information in
- * addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE.
- */
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. */
 enum ethtool_link_ext_substate_cable_issue {
 	ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE = 1,
 	ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE,
@@ -661,6 +659,7 @@
  *	now deprecated
  * @ETH_SS_FEATURES: Device feature names
  * @ETH_SS_RSS_HASH_FUNCS: RSS hush function names
+ * @ETH_SS_TUNABLES: tunable names
  * @ETH_SS_PHY_STATS: Statistic names, for use with %ETHTOOL_GPHYSTATS
  * @ETH_SS_PHY_TUNABLES: PHY tunable names
  * @ETH_SS_LINK_MODES: link mode names
@@ -670,6 +669,8 @@
  * @ETH_SS_TS_TX_TYPES: timestamping Tx types
  * @ETH_SS_TS_RX_FILTERS: timestamping Rx filters
  * @ETH_SS_UDP_TUNNEL_TYPES: UDP tunnel types
+ *
+ * @ETH_SS_COUNT: number of defined string sets
  */
 enum ethtool_stringset {
 	ETH_SS_TEST		= 0,
@@ -715,6 +716,7 @@
 /**
  * struct ethtool_sset_info - string set information
  * @cmd: Command number = %ETHTOOL_GSSET_INFO
+ * @reserved: Reserved for future use; see the note on reserved space.
  * @sset_mask: On entry, a bitmask of string sets to query, with bits
  *	numbered according to &enum ethtool_stringset.  On return, a
  *	bitmask of those string sets queried that are supported.
@@ -759,6 +761,7 @@
  * @flags: A bitmask of flags from &enum ethtool_test_flags.  Some
  *	flags may be set by the user on entry; others may be set by
  *	the driver on return.
+ * @reserved: Reserved for future use; see the note on reserved space.
  * @len: On return, the number of test results
  * @data: Array of test results
  *
@@ -959,6 +962,7 @@
  * @vlan_etype: VLAN EtherType
  * @vlan_tci: VLAN tag control information
  * @data: user defined data
+ * @padding: Reserved for future use; see the note on reserved space.
  *
  * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT
  * is set in &struct ethtool_rx_flow_spec @flow_type.
@@ -1134,7 +1138,8 @@
  *	hardware hash key.
  * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
  *	Valid values are one of the %ETH_RSS_HASH_*.
- * @rsvd:	Reserved for future extensions.
+ * @rsvd8: Reserved for future use; see the note on reserved space.
+ * @rsvd32: Reserved for future use; see the note on reserved space.
  * @rss_config: RX ring/queue index for each hash value i.e., indirection table
  *	of @indir_size __u32 elements, followed by hash key of @key_size
  *	bytes.
@@ -1302,7 +1307,9 @@
  * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
  * @phc_index: device index of the associated PHC, or -1 if there is none
  * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @tx_reserved: Reserved for future use; see the note on reserved space.
  * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ * @rx_reserved: Reserved for future use; see the note on reserved space.
  *
  * The bits in the 'tx_types' and 'rx_filters' fields correspond to
  * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
@@ -1958,6 +1965,11 @@
  *	autonegotiation; 0 if unknown or not applicable.  Read-only.
  * @transceiver: Used to distinguish different possible PHY types,
  *	reported consistently by PHYLIB.  Read-only.
+ * @master_slave_cfg: Master/slave port mode.
+ * @master_slave_state: Master/slave port state.
+ * @reserved: Reserved for future use; see the note on reserved space.
+ * @reserved1: Reserved for future use; see the note on reserved space.
+ * @link_mode_masks: Variable length bitmaps.
  *
  * If autonegotiation is disabled, the speed and @duplex represent the
  * fixed link mode and are writable if the driver supports multiple
diff --git a/original/uapi/linux/ethtool_netlink.h b/original/uapi/linux/ethtool_netlink.h
index e2bf36e..a286635 100644
--- a/original/uapi/linux/ethtool_netlink.h
+++ b/original/uapi/linux/ethtool_netlink.h
@@ -227,6 +227,7 @@
 	ETHTOOL_A_LINKMODES_DUPLEX,		/* u8 */
 	ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG,	/* u8 */
 	ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE,	/* u8 */
+	ETHTOOL_A_LINKMODES_LANES,		/* u32 */
 
 	/* add new constants above here */
 	__ETHTOOL_A_LINKMODES_CNT,
diff --git a/original/uapi/linux/firewire-cdev.h b/original/uapi/linux/firewire-cdev.h
index 7e5b5c1..5effa98 100644
--- a/original/uapi/linux/firewire-cdev.h
+++ b/original/uapi/linux/firewire-cdev.h
@@ -844,7 +844,7 @@
  * struct fw_cdev_start_iso - Start an isochronous transmission or reception
  * @cycle:	Cycle in which to start I/O.  If @cycle is greater than or
  *		equal to 0, the I/O will start on that cycle.
- * @sync:	Determines the value to wait for for receive packets that have
+ * @sync:	Determines the value to wait for receive packets that have
  *		the %FW_CDEV_ISO_SYNC bit set
  * @tags:	Tag filter bit mask.  Only valid for isochronous reception.
  *		Determines the tag values for which packets will be accepted.
diff --git a/original/uapi/linux/fsl_mc.h b/original/uapi/linux/fsl_mc.h
new file mode 100644
index 0000000..e574515
--- /dev/null
+++ b/original/uapi/linux/fsl_mc.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Management Complex (MC) userspace public interface
+ *
+ * Copyright 2021 NXP
+ *
+ */
+#ifndef _UAPI_FSL_MC_H_
+#define _UAPI_FSL_MC_H_
+
+#include <linux/types.h>
+
+#define MC_CMD_NUM_OF_PARAMS	7
+
+/**
+ * struct fsl_mc_command - Management Complex (MC) command structure
+ * @header: MC command header
+ * @params: MC command parameters
+ *
+ * Used by FSL_MC_SEND_MC_COMMAND
+ */
+struct fsl_mc_command {
+	__le64 header;
+	__le64 params[MC_CMD_NUM_OF_PARAMS];
+};
+
+#define FSL_MC_SEND_CMD_IOCTL_TYPE	'R'
+#define FSL_MC_SEND_CMD_IOCTL_SEQ	0xE0
+
+#define FSL_MC_SEND_MC_COMMAND \
+	_IOWR(FSL_MC_SEND_CMD_IOCTL_TYPE, FSL_MC_SEND_CMD_IOCTL_SEQ, \
+	struct fsl_mc_command)
+
+#endif /* _UAPI_FSL_MC_H_ */
diff --git a/original/uapi/linux/fsverity.h b/original/uapi/linux/fsverity.h
index 33f4415..15384e2 100644
--- a/original/uapi/linux/fsverity.h
+++ b/original/uapi/linux/fsverity.h
@@ -83,7 +83,21 @@
 	__u8 digest[];
 };
 
+#define FS_VERITY_METADATA_TYPE_MERKLE_TREE	1
+#define FS_VERITY_METADATA_TYPE_DESCRIPTOR	2
+#define FS_VERITY_METADATA_TYPE_SIGNATURE	3
+
+struct fsverity_read_metadata_arg {
+	__u64 metadata_type;
+	__u64 offset;
+	__u64 length;
+	__u64 buf_ptr;
+	__u64 __reserved;
+};
+
 #define FS_IOC_ENABLE_VERITY	_IOW('f', 133, struct fsverity_enable_arg)
 #define FS_IOC_MEASURE_VERITY	_IOWR('f', 134, struct fsverity_digest)
+#define FS_IOC_READ_VERITY_METADATA \
+	_IOWR('f', 135, struct fsverity_read_metadata_arg)
 
 #endif /* _UAPI_LINUX_FSVERITY_H */
diff --git a/original/uapi/linux/gfs2_ondisk.h b/original/uapi/linux/gfs2_ondisk.h
index 07e508e..6ec4291 100644
--- a/original/uapi/linux/gfs2_ondisk.h
+++ b/original/uapi/linux/gfs2_ondisk.h
@@ -47,7 +47,7 @@
 #define GFS2_FORMAT_DE		1200
 #define GFS2_FORMAT_QU		1500
 /* These are part of the superblock */
-#define GFS2_FORMAT_FS		1801
+#define GFS2_FORMAT_FS		1802
 #define GFS2_FORMAT_MULTI	1900
 
 /*
@@ -389,8 +389,9 @@
 #define GFS2_EATYPE_USR		1
 #define GFS2_EATYPE_SYS		2
 #define GFS2_EATYPE_SECURITY	3
+#define GFS2_EATYPE_TRUSTED	4
 
-#define GFS2_EATYPE_LAST	3
+#define GFS2_EATYPE_LAST	4
 #define GFS2_EATYPE_VALID(x)	((x) <= GFS2_EATYPE_LAST)
 
 #define GFS2_EAFLAG_LAST	0x01	/* last ea in block */
diff --git a/original/uapi/linux/gpio.h b/original/uapi/linux/gpio.h
index e4eb0b8..eaaea3d 100644
--- a/original/uapi/linux/gpio.h
+++ b/original/uapi/linux/gpio.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
 /*
  * <linux/gpio.h> - userspace ABI for the GPIO character devices
  *
@@ -212,7 +212,7 @@
  * @offset: the local offset on this GPIO chip, fill this in when
  * requesting the line information from the kernel
  * @num_attrs: the number of attributes in @attrs
- * @flags: flags for the GPIO lines, with values from &enum
+ * @flags: flags for this GPIO line, with values from &enum
  * gpio_v2_line_flag, such as %GPIO_V2_LINE_FLAG_ACTIVE_LOW,
  * %GPIO_V2_LINE_FLAG_OUTPUT etc, added together.
  * @attrs: the configuration attributes associated with the line
diff --git a/original/uapi/linux/i2c-dev.h b/original/uapi/linux/i2c-dev.h
index 85f8047..1c4cec4 100644
--- a/original/uapi/linux/i2c-dev.h
+++ b/original/uapi/linux/i2c-dev.h
@@ -1,25 +1,10 @@
 /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
 /*
-    i2c-dev.h - i2c-bus driver, char device interface
-
-    Copyright (C) 1995-97 Simon G. Vogl
-    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-    MA 02110-1301 USA.
-*/
+ * i2c-dev.h - I2C bus char device interface
+ *
+ * Copyright (C) 1995-97 Simon G. Vogl
+ * Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+ */
 
 #ifndef _UAPI_LINUX_I2C_DEV_H
 #define _UAPI_LINUX_I2C_DEV_H
diff --git a/original/uapi/linux/i2c.h b/original/uapi/linux/i2c.h
index f71a175..92326eb 100644
--- a/original/uapi/linux/i2c.h
+++ b/original/uapi/linux/i2c.h
@@ -1,29 +1,11 @@
 /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-/* ------------------------------------------------------------------------- */
-/*									     */
-/* i2c.h - definitions for the i2c-bus interface			     */
-/*									     */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 1995-2000 Simon G. Vogl
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-    MA 02110-1301 USA.							     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
-   Frodo Looijaard <frodol@dds.nl> */
+/*
+ * i2c.h - definitions for the I2C bus interface
+ *
+ * Copyright (C) 1995-2000 Simon G. Vogl
+ * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+ * Frodo Looijaard <frodol@dds.nl>
+ */
 
 #ifndef _UAPI_LINUX_I2C_H
 #define _UAPI_LINUX_I2C_H
@@ -32,18 +14,41 @@
 
 /**
  * struct i2c_msg - an I2C transaction segment beginning with START
- * @addr: Slave address, either seven or ten bits.  When this is a ten
- *	bit address, I2C_M_TEN must be set in @flags and the adapter
- *	must support I2C_FUNC_10BIT_ADDR.
- * @flags: I2C_M_RD is handled by all adapters.  No other flags may be
- *	provided unless the adapter exported the relevant I2C_FUNC_*
- *	flags through i2c_check_functionality().
- * @len: Number of data bytes in @buf being read from or written to the
- *	I2C slave address.  For read transactions where I2C_M_RECV_LEN
- *	is set, the caller guarantees that this buffer can hold up to
- *	32 bytes in addition to the initial length byte sent by the
- *	slave (plus, if used, the SMBus PEC); and this value will be
- *	incremented by the number of block data bytes received.
+ *
+ * @addr: Slave address, either 7 or 10 bits. When this is a 10 bit address,
+ *   %I2C_M_TEN must be set in @flags and the adapter must support
+ *   %I2C_FUNC_10BIT_ADDR.
+ *
+ * @flags:
+ *   Supported by all adapters:
+ *   %I2C_M_RD: read data (from slave to master). Guaranteed to be 0x0001!
+ *
+ *   Optional:
+ *   %I2C_M_DMA_SAFE: the buffer of this message is DMA safe. Makes only sense
+ *     in kernelspace, because userspace buffers are copied anyway
+ *
+ *   Only if I2C_FUNC_10BIT_ADDR is set:
+ *   %I2C_M_TEN: this is a 10 bit chip address
+ *
+ *   Only if I2C_FUNC_SMBUS_READ_BLOCK_DATA is set:
+ *   %I2C_M_RECV_LEN: message length will be first received byte
+ *
+ *   Only if I2C_FUNC_NOSTART is set:
+ *   %I2C_M_NOSTART: skip repeated start sequence
+
+ *   Only if I2C_FUNC_PROTOCOL_MANGLING is set:
+ *   %I2C_M_NO_RD_ACK: in a read message, master ACK/NACK bit is skipped
+ *   %I2C_M_IGNORE_NAK: treat NACK from client as ACK
+ *   %I2C_M_REV_DIR_ADDR: toggles the Rd/Wr bit
+ *   %I2C_M_STOP: force a STOP condition after the message
+ *
+ * @len: Number of data bytes in @buf being read from or written to the I2C
+ *   slave address. For read transactions where %I2C_M_RECV_LEN is set, the
+ *   caller guarantees that this buffer can hold up to %I2C_SMBUS_BLOCK_MAX
+ *   bytes in addition to the initial length byte sent by the slave (plus,
+ *   if used, the SMBus PEC); and this value will be incremented by the number
+ *   of block data bytes received.
+ *
  * @buf: The buffer into which data is read, or from which it's written.
  *
  * An i2c_msg is the low level representation of one segment of an I2C
@@ -60,40 +65,36 @@
  * group, it is followed by a STOP.  Otherwise it is followed by the next
  * @i2c_msg transaction segment, beginning with a (repeated) START.
  *
- * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
+ * Alternatively, when the adapter supports %I2C_FUNC_PROTOCOL_MANGLING then
  * passing certain @flags may have changed those standard protocol behaviors.
  * Those flags are only for use with broken/nonconforming slaves, and with
- * adapters which are known to support the specific mangling options they
- * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
+ * adapters which are known to support the specific mangling options they need.
  */
 struct i2c_msg {
-	__u16 addr;	/* slave address			*/
+	__u16 addr;
 	__u16 flags;
-#define I2C_M_RD		0x0001	/* read data, from slave to master */
-					/* I2C_M_RD is guaranteed to be 0x0001! */
-#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
-#define I2C_M_DMA_SAFE		0x0200	/* the buffer of this message is DMA safe */
-					/* makes only sense in kernelspace */
-					/* userspace buffers are copied anyway */
-#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
-#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_NOSTART */
-#define I2C_M_STOP		0x8000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-	__u16 len;		/* msg length				*/
-	__u8 *buf;		/* pointer to msg data			*/
+#define I2C_M_RD		0x0001	/* guaranteed to be 0x0001! */
+#define I2C_M_TEN		0x0010	/* use only if I2C_FUNC_10BIT_ADDR */
+#define I2C_M_DMA_SAFE		0x0200	/* use only in kernel space */
+#define I2C_M_RECV_LEN		0x0400	/* use only if I2C_FUNC_SMBUS_READ_BLOCK_DATA */
+#define I2C_M_NO_RD_ACK		0x0800	/* use only if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK	0x1000	/* use only if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_REV_DIR_ADDR	0x2000	/* use only if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NOSTART		0x4000	/* use only if I2C_FUNC_NOSTART */
+#define I2C_M_STOP		0x8000	/* use only if I2C_FUNC_PROTOCOL_MANGLING */
+	__u16 len;
+	__u8 *buf;
 };
 
 /* To determine what functionality is present */
 
 #define I2C_FUNC_I2C			0x00000001
-#define I2C_FUNC_10BIT_ADDR		0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_IGNORE_NAK etc. */
+#define I2C_FUNC_10BIT_ADDR		0x00000002 /* required for I2C_M_TEN */
+#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* required for I2C_M_IGNORE_NAK etc. */
 #define I2C_FUNC_SMBUS_PEC		0x00000008
-#define I2C_FUNC_NOSTART		0x00000010 /* I2C_M_NOSTART */
+#define I2C_FUNC_NOSTART		0x00000010 /* required for I2C_M_NOSTART */
 #define I2C_FUNC_SLAVE			0x00000020
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 or later */
 #define I2C_FUNC_SMBUS_QUICK		0x00010000
 #define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
 #define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
@@ -102,11 +103,11 @@
 #define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
 #define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
 #define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000 /* required for I2C_M_RECV_LEN */
 #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
 #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
-#define I2C_FUNC_SMBUS_HOST_NOTIFY	0x10000000
+#define I2C_FUNC_SMBUS_HOST_NOTIFY	0x10000000 /* SMBus 2.0 or later */
 
 #define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
 					 I2C_FUNC_SMBUS_WRITE_BYTE)
@@ -128,6 +129,11 @@
 					 I2C_FUNC_SMBUS_I2C_BLOCK | \
 					 I2C_FUNC_SMBUS_PEC)
 
+/* if I2C_M_RECV_LEN is also supported */
+#define I2C_FUNC_SMBUS_EMUL_ALL		(I2C_FUNC_SMBUS_EMUL | \
+					 I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_BLOCK_PROC_CALL)
+
 /*
  * Data for SMBus Messages
  */
diff --git a/original/uapi/linux/idxd.h b/original/uapi/linux/idxd.h
index 236d437..e33997b 100644
--- a/original/uapi/linux/idxd.h
+++ b/original/uapi/linux/idxd.h
@@ -247,8 +247,8 @@
 			uint32_t	rsvd2:8;
 		};
 
-		uint16_t	delta_rec_size;
-		uint16_t	crc_val;
+		uint32_t	delta_rec_size;
+		uint32_t	crc_val;
 
 		/* DIF check & strip */
 		struct {
diff --git a/original/uapi/linux/if_bonding.h b/original/uapi/linux/if_bonding.h
index 45f3750..e8eb4ad 100644
--- a/original/uapi/linux/if_bonding.h
+++ b/original/uapi/linux/if_bonding.h
@@ -94,6 +94,7 @@
 #define BOND_XMIT_POLICY_LAYER23	2 /* layer 2+3 (IP ^ MAC) */
 #define BOND_XMIT_POLICY_ENCAP23	3 /* encapsulated layer 2+3 */
 #define BOND_XMIT_POLICY_ENCAP34	4 /* encapsulated layer 3+4 */
+#define BOND_XMIT_POLICY_VLAN_SRCMAC	5 /* vlan + source MAC */
 
 /* 802.3ad port state definitions (43.4.2.2 in the 802.3ad standard) */
 #define LACP_STATE_LACP_ACTIVITY   0x1
diff --git a/original/uapi/linux/if_link.h b/original/uapi/linux/if_link.h
index 82708c6..91c8dda 100644
--- a/original/uapi/linux/if_link.h
+++ b/original/uapi/linux/if_link.h
@@ -525,6 +525,8 @@
 	IFLA_BRPORT_BACKUP_PORT,
 	IFLA_BRPORT_MRP_RING_OPEN,
 	IFLA_BRPORT_MRP_IN_OPEN,
+	IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT,
+	IFLA_BRPORT_MCAST_EHT_HOSTS_CNT,
 	__IFLA_BRPORT_MAX
 };
 #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
diff --git a/original/uapi/linux/incrementalfs.h b/original/uapi/linux/incrementalfs.h
index 6e157c6..f1a6199 100644
--- a/original/uapi/linux/incrementalfs.h
+++ b/original/uapi/linux/incrementalfs.h
@@ -18,7 +18,14 @@
 
 /* ===== constants ===== */
 #define INCFS_NAME "incremental-fs"
-#define INCFS_MAGIC_NUMBER (unsigned long)(0x5346434e49ul)
+
+/*
+ * Magic number used in file header and in memory superblock
+ * Note that it is a 5 byte unsigned long. Thus on 32 bit kernels, it is
+ * truncated to a 4 byte number
+ */
+#define INCFS_MAGIC_NUMBER (0x5346434e49ul & ULONG_MAX)
+
 #define INCFS_DATA_FILE_BLOCK_SIZE 4096
 #define INCFS_HEADER_VER 1
 
@@ -127,6 +134,13 @@
 #define INCFS_IOC_SET_READ_TIMEOUTS \
 	_IOW(INCFS_IOCTL_BASE_CODE, 38, struct incfs_set_read_timeouts_args)
 
+/*
+ * Get last read error
+ * May only be called on .pending_reads file
+ */
+#define INCFS_IOC_GET_LAST_READ_ERROR \
+	_IOW(INCFS_IOCTL_BASE_CODE, 39, struct incfs_get_last_read_error_args)
+
 /* ===== sysfs feature flags ===== */
 /*
  * Each flag is represented by a file in /sys/fs/incremental-fs/features
@@ -549,5 +563,24 @@
 	__u32 timeouts_array_size;
 };
 
+/*
+ * Get last read error struct
+ * Arguments for INCFS_IOC_GET_LAST_READ_ERROR
+ */
+struct incfs_get_last_read_error_args {
+	/* File id of last file that had a read error */
+	incfs_uuid_t	file_id_out;
+
+	/* Time of last read error, in us, from CLOCK_MONOTONIC */
+	__u64	time_us_out;
+
+	/* Index of page that was being read at last read error */
+	__u32	page_out;
+
+	/* errno of last read error */
+	__u32	errno_out;
+
+	__u64	reserved;
+};
 
 #endif /* _UAPI_LINUX_INCREMENTALFS_H */
diff --git a/original/uapi/linux/input.h b/original/uapi/linux/input.h
index 9a61c28..ee31274 100644
--- a/original/uapi/linux/input.h
+++ b/original/uapi/linux/input.h
@@ -84,7 +84,7 @@
  * in units per radian.
  * When INPUT_PROP_ACCELEROMETER is set the resolution changes.
  * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in
- * in units per g (units/g) and in units per degree per second
+ * units per g (units/g) and in units per degree per second
  * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ).
  */
 struct input_absinfo {
diff --git a/original/uapi/linux/io_uring.h b/original/uapi/linux/io_uring.h
index d31a2a1..2514eb6 100644
--- a/original/uapi/linux/io_uring.h
+++ b/original/uapi/linux/io_uring.h
@@ -262,6 +262,7 @@
 #define IORING_FEAT_POLL_32BITS 	(1U << 6)
 #define IORING_FEAT_SQPOLL_NONFIXED	(1U << 7)
 #define IORING_FEAT_EXT_ARG		(1U << 8)
+#define IORING_FEAT_NATIVE_WORKERS	(1U << 9)
 
 /*
  * io_uring_register(2) opcodes and arguments
@@ -285,12 +286,22 @@
 	IORING_REGISTER_LAST
 };
 
+/* deprecated, see struct io_uring_rsrc_update */
 struct io_uring_files_update {
 	__u32 offset;
 	__u32 resv;
 	__aligned_u64 /* __s32 * */ fds;
 };
 
+struct io_uring_rsrc_update {
+	__u32 offset;
+	__u32 resv;
+	__aligned_u64 data;
+};
+
+/* Skip updating fd indexes set to this value in the fd table */
+#define IORING_REGISTER_FILES_SKIP	(-2)
+
 #define IO_URING_OP_SUPPORTED	(1U << 0)
 
 struct io_uring_probe_op {
diff --git a/original/uapi/linux/ipv6.h b/original/uapi/linux/ipv6.h
index 13e8751..7060377 100644
--- a/original/uapi/linux/ipv6.h
+++ b/original/uapi/linux/ipv6.h
@@ -189,6 +189,7 @@
 	DEVCONF_ACCEPT_RA_RT_INFO_MIN_PLEN,
 	DEVCONF_NDISC_TCLASS,
 	DEVCONF_RPL_SEG_ENABLED,
+	DEVCONF_RA_DEFRTR_METRIC,
 	DEVCONF_MAX
 };
 
diff --git a/original/uapi/linux/kvm.h b/original/uapi/linux/kvm.h
index 374c678..f6afee2 100644
--- a/original/uapi/linux/kvm.h
+++ b/original/uapi/linux/kvm.h
@@ -216,6 +216,20 @@
 	} u;
 };
 
+struct kvm_xen_exit {
+#define KVM_EXIT_XEN_HCALL          1
+	__u32 type;
+	union {
+		struct {
+			__u32 longmode;
+			__u32 cpl;
+			__u64 input;
+			__u64 result;
+			__u64 params[6];
+		} hcall;
+	} u;
+};
+
 #define KVM_S390_GET_SKEYS_NONE   1
 #define KVM_S390_SKEYS_MAX        1048576
 
@@ -252,6 +266,8 @@
 #define KVM_EXIT_X86_WRMSR        30
 #define KVM_EXIT_DIRTY_RING_FULL  31
 #define KVM_EXIT_AP_RESET_HOLD    32
+#define KVM_EXIT_X86_BUS_LOCK     33
+#define KVM_EXIT_XEN              34
 
 /* For KVM_EXIT_INTERNAL_ERROR */
 /* Emulate instruction failed. */
@@ -428,6 +444,8 @@
 			__u32 index; /* kernel -> user */
 			__u64 data; /* kernel <-> user */
 		} msr;
+		/* KVM_EXIT_XEN */
+		struct kvm_xen_exit xen;
 		/* Fix the size of the union. */
 		char padding[256];
 	};
@@ -1058,6 +1076,8 @@
 #define KVM_CAP_ENFORCE_PV_FEATURE_CPUID 190
 #define KVM_CAP_SYS_HYPERV_CPUID 191
 #define KVM_CAP_DIRTY_LOG_RING 192
+#define KVM_CAP_X86_BUS_LOCK_EXIT 193
+#define KVM_CAP_PPC_DAWR1 194
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -1131,6 +1151,11 @@
 #endif
 
 #ifdef KVM_CAP_XEN_HVM
+#define KVM_XEN_HVM_CONFIG_HYPERCALL_MSR	(1 << 0)
+#define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL	(1 << 1)
+#define KVM_XEN_HVM_CONFIG_SHARED_INFO		(1 << 2)
+#define KVM_XEN_HVM_CONFIG_RUNSTATE		(1 << 3)
+
 struct kvm_xen_hvm_config {
 	__u32 flags;
 	__u32 msr;
@@ -1565,6 +1590,57 @@
 /* Available with KVM_CAP_DIRTY_LOG_RING */
 #define KVM_RESET_DIRTY_RINGS		_IO(KVMIO, 0xc7)
 
+/* Per-VM Xen attributes */
+#define KVM_XEN_HVM_GET_ATTR	_IOWR(KVMIO, 0xc8, struct kvm_xen_hvm_attr)
+#define KVM_XEN_HVM_SET_ATTR	_IOW(KVMIO,  0xc9, struct kvm_xen_hvm_attr)
+
+struct kvm_xen_hvm_attr {
+	__u16 type;
+	__u16 pad[3];
+	union {
+		__u8 long_mode;
+		__u8 vector;
+		struct {
+			__u64 gfn;
+		} shared_info;
+		__u64 pad[8];
+	} u;
+};
+
+/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO */
+#define KVM_XEN_ATTR_TYPE_LONG_MODE		0x0
+#define KVM_XEN_ATTR_TYPE_SHARED_INFO		0x1
+#define KVM_XEN_ATTR_TYPE_UPCALL_VECTOR		0x2
+
+/* Per-vCPU Xen attributes */
+#define KVM_XEN_VCPU_GET_ATTR	_IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr)
+#define KVM_XEN_VCPU_SET_ATTR	_IOW(KVMIO,  0xcb, struct kvm_xen_vcpu_attr)
+
+struct kvm_xen_vcpu_attr {
+	__u16 type;
+	__u16 pad[3];
+	union {
+		__u64 gpa;
+		__u64 pad[8];
+		struct {
+			__u64 state;
+			__u64 state_entry_time;
+			__u64 time_running;
+			__u64 time_runnable;
+			__u64 time_blocked;
+			__u64 time_offline;
+		} runstate;
+	} u;
+};
+
+/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO */
+#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO	0x0
+#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_TIME_INFO	0x1
+#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADDR	0x2
+#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT	0x3
+#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA	0x4
+#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST	0x5
+
 /* Secure Encrypted Virtualization command */
 enum sev_cmd_id {
 	/* Guest initialization commands */
@@ -1593,6 +1669,8 @@
 	KVM_SEV_DBG_ENCRYPT,
 	/* Guest certificates commands */
 	KVM_SEV_CERT_EXPORT,
+	/* Attestation report */
+	KVM_SEV_GET_ATTESTATION_REPORT,
 
 	KVM_SEV_NR_MAX,
 };
@@ -1645,6 +1723,12 @@
 	__u32 len;
 };
 
+struct kvm_sev_attestation_report {
+	__u8 mnonce[16];
+	__u64 uaddr;
+	__u32 len;
+};
+
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 #define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
 #define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)
@@ -1766,4 +1850,7 @@
 	__u64 offset;
 };
 
+#define KVM_BUS_LOCK_DETECTION_OFF             (1 << 0)
+#define KVM_BUS_LOCK_DETECTION_EXIT            (1 << 1)
+
 #endif /* __LINUX_KVM_H */
diff --git a/original/uapi/linux/l2tp.h b/original/uapi/linux/l2tp.h
index 30c80d5..bab8c97 100644
--- a/original/uapi/linux/l2tp.h
+++ b/original/uapi/linux/l2tp.h
@@ -145,6 +145,7 @@
 	L2TP_ATTR_RX_ERRORS,		/* u64 */
 	L2TP_ATTR_STATS_PAD,
 	L2TP_ATTR_RX_COOKIE_DISCARDS,	/* u64 */
+	L2TP_ATTR_RX_INVALID,		/* u64 */
 	__L2TP_ATTR_STATS_MAX,
 };
 
diff --git a/original/uapi/linux/map_to_7segment.h b/original/uapi/linux/map_to_7segment.h
index 13a06e5..8b02088 100644
--- a/original/uapi/linux/map_to_7segment.h
+++ b/original/uapi/linux/map_to_7segment.h
@@ -45,17 +45,22 @@
  * In device drivers it is recommended, if required, to make the char map
  * accessible via the sysfs interface using the following scheme:
  *
- * static ssize_t show_map(struct device *dev, char *buf) {
+ * static ssize_t map_seg7_show(struct device *dev,
+ *				struct device_attribute *attr, char *buf)
+ * {
  *	memcpy(buf, &map_seg7, sizeof(map_seg7));
  *	return sizeof(map_seg7);
  * }
- * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) {
+ * static ssize_t map_seg7_store(struct device *dev,
+ *				 struct device_attribute *attr, const char *buf,
+ *				 size_t cnt)
+ * {
  *	if(cnt != sizeof(map_seg7))
  *		return -EINVAL;
  *	memcpy(&map_seg7, buf, cnt);
  *	return cnt;
  * }
- * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map);
+ * static DEVICE_ATTR_RW(map_seg7);
  *
  * History:
  * 2005-05-31	RFC linux-kernel@vger.kernel.org
diff --git a/original/uapi/linux/media.h b/original/uapi/linux/media.h
index 383ac7b..200fa84 100644
--- a/original/uapi/linux/media.h
+++ b/original/uapi/linux/media.h
@@ -127,6 +127,7 @@
 #define MEDIA_ENT_F_PROC_VIDEO_STATISTICS	(MEDIA_ENT_F_BASE + 0x4006)
 #define MEDIA_ENT_F_PROC_VIDEO_ENCODER		(MEDIA_ENT_F_BASE + 0x4007)
 #define MEDIA_ENT_F_PROC_VIDEO_DECODER		(MEDIA_ENT_F_BASE + 0x4008)
+#define MEDIA_ENT_F_PROC_VIDEO_ISP		(MEDIA_ENT_F_BASE + 0x4009)
 
 /*
  * Switch and bridge entity functions
diff --git a/original/uapi/linux/mempolicy.h b/original/uapi/linux/mempolicy.h
index 3354774..8948467 100644
--- a/original/uapi/linux/mempolicy.h
+++ b/original/uapi/linux/mempolicy.h
@@ -28,12 +28,14 @@
 /* Flags for set_mempolicy */
 #define MPOL_F_STATIC_NODES	(1 << 15)
 #define MPOL_F_RELATIVE_NODES	(1 << 14)
+#define MPOL_F_NUMA_BALANCING	(1 << 13) /* Optimize with NUMA balancing if possible */
 
 /*
  * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
  * either set_mempolicy() or mbind().
  */
-#define MPOL_MODE_FLAGS	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
+#define MPOL_MODE_FLAGS							\
+	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES | MPOL_F_NUMA_BALANCING)
 
 /* Flags for get_mempolicy */
 #define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
diff --git a/original/uapi/linux/misc/bcm_vk.h b/original/uapi/linux/misc/bcm_vk.h
new file mode 100644
index 0000000..ec28e0b
--- /dev/null
+++ b/original/uapi/linux/misc/bcm_vk.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright 2018-2020 Broadcom.
+ */
+
+#ifndef __UAPI_LINUX_MISC_BCM_VK_H
+#define __UAPI_LINUX_MISC_BCM_VK_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define BCM_VK_MAX_FILENAME 64
+
+struct vk_image {
+	__u32 type; /* Type of image */
+#define VK_IMAGE_TYPE_BOOT1 1 /* 1st stage (load to SRAM) */
+#define VK_IMAGE_TYPE_BOOT2 2 /* 2nd stage (load to DDR) */
+	__u8 filename[BCM_VK_MAX_FILENAME]; /* Filename of image */
+};
+
+struct vk_reset {
+	__u32 arg1;
+	__u32 arg2;
+};
+
+#define VK_MAGIC		0x5e
+
+/* Load image to Valkyrie */
+#define VK_IOCTL_LOAD_IMAGE	_IOW(VK_MAGIC, 0x2, struct vk_image)
+
+/* Send Reset to Valkyrie */
+#define VK_IOCTL_RESET		_IOW(VK_MAGIC, 0x4, struct vk_reset)
+
+/*
+ * Firmware Status accessed directly via BAR space
+ */
+#define VK_BAR_FWSTS			0x41c
+#define VK_BAR_COP_FWSTS		0x428
+/* VK_FWSTS definitions */
+#define VK_FWSTS_RELOCATION_ENTRY	(1UL << 0)
+#define VK_FWSTS_RELOCATION_EXIT	(1UL << 1)
+#define VK_FWSTS_INIT_START		(1UL << 2)
+#define VK_FWSTS_ARCH_INIT_DONE		(1UL << 3)
+#define VK_FWSTS_PRE_KNL1_INIT_DONE	(1UL << 4)
+#define VK_FWSTS_PRE_KNL2_INIT_DONE	(1UL << 5)
+#define VK_FWSTS_POST_KNL_INIT_DONE	(1UL << 6)
+#define VK_FWSTS_INIT_DONE		(1UL << 7)
+#define VK_FWSTS_APP_INIT_START		(1UL << 8)
+#define VK_FWSTS_APP_INIT_DONE		(1UL << 9)
+#define VK_FWSTS_MASK			0xffffffff
+#define VK_FWSTS_READY			(VK_FWSTS_INIT_START | \
+					 VK_FWSTS_ARCH_INIT_DONE | \
+					 VK_FWSTS_PRE_KNL1_INIT_DONE | \
+					 VK_FWSTS_PRE_KNL2_INIT_DONE | \
+					 VK_FWSTS_POST_KNL_INIT_DONE | \
+					 VK_FWSTS_INIT_DONE | \
+					 VK_FWSTS_APP_INIT_START | \
+					 VK_FWSTS_APP_INIT_DONE)
+/* Deinit */
+#define VK_FWSTS_APP_DEINIT_START	(1UL << 23)
+#define VK_FWSTS_APP_DEINIT_DONE	(1UL << 24)
+#define VK_FWSTS_DRV_DEINIT_START	(1UL << 25)
+#define VK_FWSTS_DRV_DEINIT_DONE	(1UL << 26)
+#define VK_FWSTS_RESET_DONE		(1UL << 27)
+#define VK_FWSTS_DEINIT_TRIGGERED	(VK_FWSTS_APP_DEINIT_START | \
+					 VK_FWSTS_APP_DEINIT_DONE  | \
+					 VK_FWSTS_DRV_DEINIT_START | \
+					 VK_FWSTS_DRV_DEINIT_DONE)
+/* Last nibble for reboot reason */
+#define VK_FWSTS_RESET_REASON_SHIFT	28
+#define VK_FWSTS_RESET_REASON_MASK	(0xf << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_SYS_PWRUP	(0x0 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_MBOX_DB		(0x1 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_M7_WDOG		(0x2 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_TEMP		(0x3 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_PCI_FLR		(0x4 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_PCI_HOT		(0x5 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_PCI_WARM		(0x6 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_PCI_COLD		(0x7 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_L1		(0x8 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_L0		(0x9 << VK_FWSTS_RESET_REASON_SHIFT)
+#define VK_FWSTS_RESET_UNKNOWN		(0xf << VK_FWSTS_RESET_REASON_SHIFT)
+
+#endif /* __UAPI_LINUX_MISC_BCM_VK_H */
diff --git a/original/uapi/linux/mount.h b/original/uapi/linux/mount.h
index dd8306e..e6524ea 100644
--- a/original/uapi/linux/mount.h
+++ b/original/uapi/linux/mount.h
@@ -1,6 +1,8 @@
 #ifndef _UAPI_LINUX_MOUNT_H
 #define _UAPI_LINUX_MOUNT_H
 
+#include <linux/types.h>
+
 /*
  * These are the fs-independent mount-flags: up to 32 flags are supported
  *
@@ -117,5 +119,19 @@
 #define MOUNT_ATTR_NOATIME	0x00000010 /* - Do not update access times. */
 #define MOUNT_ATTR_STRICTATIME	0x00000020 /* - Always perform atime updates */
 #define MOUNT_ATTR_NODIRATIME	0x00000080 /* Do not update directory access times */
+#define MOUNT_ATTR_IDMAP	0x00100000 /* Idmap mount to @userns_fd in struct mount_attr. */
+
+/*
+ * mount_setattr()
+ */
+struct mount_attr {
+	__u64 attr_set;
+	__u64 attr_clr;
+	__u64 propagation;
+	__u64 userns_fd;
+};
+
+/* List of all mount_attr versions. */
+#define MOUNT_ATTR_SIZE_VER0	32 /* sizeof first published struct */
 
 #endif /* _UAPI_LINUX_MOUNT_H */
diff --git a/original/uapi/linux/mptcp.h b/original/uapi/linux/mptcp.h
index 9762660..e1172c1 100644
--- a/original/uapi/linux/mptcp.h
+++ b/original/uapi/linux/mptcp.h
@@ -36,6 +36,7 @@
 /* netlink interface */
 #define MPTCP_PM_NAME		"mptcp_pm"
 #define MPTCP_PM_CMD_GRP_NAME	"mptcp_pm_cmds"
+#define MPTCP_PM_EV_GRP_NAME	"mptcp_pm_events"
 #define MPTCP_PM_VER		0x1
 
 /*
@@ -82,6 +83,7 @@
 	MPTCP_PM_CMD_FLUSH_ADDRS,
 	MPTCP_PM_CMD_SET_LIMITS,
 	MPTCP_PM_CMD_GET_LIMITS,
+	MPTCP_PM_CMD_SET_FLAGS,
 
 	__MPTCP_PM_CMD_AFTER_LAST
 };
@@ -101,6 +103,81 @@
 	__u64	mptcpi_write_seq;
 	__u64	mptcpi_snd_una;
 	__u64	mptcpi_rcv_nxt;
+	__u8	mptcpi_local_addr_used;
+	__u8	mptcpi_local_addr_max;
 };
 
+/*
+ * MPTCP_EVENT_CREATED: token, family, saddr4 | saddr6, daddr4 | daddr6,
+ *                      sport, dport
+ * A new MPTCP connection has been created. It is the good time to allocate
+ * memory and send ADD_ADDR if needed. Depending on the traffic-patterns
+ * it can take a long time until the MPTCP_EVENT_ESTABLISHED is sent.
+ *
+ * MPTCP_EVENT_ESTABLISHED: token, family, saddr4 | saddr6, daddr4 | daddr6,
+ *			    sport, dport
+ * A MPTCP connection is established (can start new subflows).
+ *
+ * MPTCP_EVENT_CLOSED: token
+ * A MPTCP connection has stopped.
+ *
+ * MPTCP_EVENT_ANNOUNCED: token, rem_id, family, daddr4 | daddr6 [, dport]
+ * A new address has been announced by the peer.
+ *
+ * MPTCP_EVENT_REMOVED: token, rem_id
+ * An address has been lost by the peer.
+ *
+ * MPTCP_EVENT_SUB_ESTABLISHED: token, family, saddr4 | saddr6,
+ *                              daddr4 | daddr6, sport, dport, backup,
+ *                              if_idx [, error]
+ * A new subflow has been established. 'error' should not be set.
+ *
+ * MPTCP_EVENT_SUB_CLOSED: token, family, saddr4 | saddr6, daddr4 | daddr6,
+ *                         sport, dport, backup, if_idx [, error]
+ * A subflow has been closed. An error (copy of sk_err) could be set if an
+ * error has been detected for this subflow.
+ *
+ * MPTCP_EVENT_SUB_PRIORITY: token, family, saddr4 | saddr6, daddr4 | daddr6,
+ *                           sport, dport, backup, if_idx [, error]
+ *       The priority of a subflow has changed. 'error' should not be set.
+ */
+enum mptcp_event_type {
+	MPTCP_EVENT_UNSPEC = 0,
+	MPTCP_EVENT_CREATED = 1,
+	MPTCP_EVENT_ESTABLISHED = 2,
+	MPTCP_EVENT_CLOSED = 3,
+
+	MPTCP_EVENT_ANNOUNCED = 6,
+	MPTCP_EVENT_REMOVED = 7,
+
+	MPTCP_EVENT_SUB_ESTABLISHED = 10,
+	MPTCP_EVENT_SUB_CLOSED = 11,
+
+	MPTCP_EVENT_SUB_PRIORITY = 13,
+};
+
+enum mptcp_event_attr {
+	MPTCP_ATTR_UNSPEC = 0,
+
+	MPTCP_ATTR_TOKEN,	/* u32 */
+	MPTCP_ATTR_FAMILY,	/* u16 */
+	MPTCP_ATTR_LOC_ID,	/* u8 */
+	MPTCP_ATTR_REM_ID,	/* u8 */
+	MPTCP_ATTR_SADDR4,	/* be32 */
+	MPTCP_ATTR_SADDR6,	/* struct in6_addr */
+	MPTCP_ATTR_DADDR4,	/* be32 */
+	MPTCP_ATTR_DADDR6,	/* struct in6_addr */
+	MPTCP_ATTR_SPORT,	/* be16 */
+	MPTCP_ATTR_DPORT,	/* be16 */
+	MPTCP_ATTR_BACKUP,	/* u8 */
+	MPTCP_ATTR_ERROR,	/* u8 */
+	MPTCP_ATTR_FLAGS,	/* u16 */
+	MPTCP_ATTR_TIMEOUT,	/* u32 */
+	MPTCP_ATTR_IF_IDX,	/* s32 */
+
+	__MPTCP_ATTR_AFTER_LAST
+};
+
+#define MPTCP_ATTR_MAX (__MPTCP_ATTR_AFTER_LAST - 1)
+
 #endif /* _UAPI_MPTCP_H */
diff --git a/original/uapi/linux/netfilter/nf_tables.h b/original/uapi/linux/netfilter/nf_tables.h
index b1633e7..79bab7a 100644
--- a/original/uapi/linux/netfilter/nf_tables.h
+++ b/original/uapi/linux/netfilter/nf_tables.h
@@ -164,7 +164,10 @@
  */
 enum nft_table_flags {
 	NFT_TABLE_F_DORMANT	= 0x1,
+	NFT_TABLE_F_OWNER	= 0x2,
 };
+#define NFT_TABLE_F_MASK	(NFT_TABLE_F_DORMANT | \
+				 NFT_TABLE_F_OWNER)
 
 /**
  * enum nft_table_attributes - nf_tables table netlink attributes
@@ -173,6 +176,7 @@
  * @NFTA_TABLE_FLAGS: bitmask of enum nft_table_flags (NLA_U32)
  * @NFTA_TABLE_USE: number of chains in this table (NLA_U32)
  * @NFTA_TABLE_USERDATA: user data (NLA_BINARY)
+ * @NFTA_TABLE_OWNER: owner of this table through netlink portID (NLA_U32)
  */
 enum nft_table_attributes {
 	NFTA_TABLE_UNSPEC,
@@ -182,6 +186,7 @@
 	NFTA_TABLE_HANDLE,
 	NFTA_TABLE_PAD,
 	NFTA_TABLE_USERDATA,
+	NFTA_TABLE_OWNER,
 	__NFTA_TABLE_MAX
 };
 #define NFTA_TABLE_MAX		(__NFTA_TABLE_MAX - 1)
diff --git a/original/uapi/linux/netfilter/nfnetlink_cthelper.h b/original/uapi/linux/netfilter/nfnetlink_cthelper.h
index a13137a..70af020 100644
--- a/original/uapi/linux/netfilter/nfnetlink_cthelper.h
+++ b/original/uapi/linux/netfilter/nfnetlink_cthelper.h
@@ -5,7 +5,7 @@
 #define NFCT_HELPER_STATUS_DISABLED	0
 #define NFCT_HELPER_STATUS_ENABLED	1
 
-enum nfnl_acct_msg_types {
+enum nfnl_cthelper_msg_types {
 	NFNL_MSG_CTHELPER_NEW,
 	NFNL_MSG_CTHELPER_GET,
 	NFNL_MSG_CTHELPER_DEL,
diff --git a/original/uapi/linux/netfilter/xt_IDLETIMER.h b/original/uapi/linux/netfilter/xt_IDLETIMER.h
index 046ee37..49ddcdc 100644
--- a/original/uapi/linux/netfilter/xt_IDLETIMER.h
+++ b/original/uapi/linux/netfilter/xt_IDLETIMER.h
@@ -4,7 +4,6 @@
  * Header file for Xtables timer target module.
  *
  * Copyright (C) 2004, 2010 Nokia Corporation
- *
  * Written by Timo Teras <ext-timo.teras@nokia.com>
  *
  * Converted to x_tables and forward-ported to 2.6.34
@@ -35,19 +34,11 @@
 #define MAX_IDLETIMER_LABEL_SIZE 28
 #define XT_IDLETIMER_ALARM 0x01
 
-#define NLMSG_MAX_SIZE 64
-
-#define NL_EVENT_TYPE_INACTIVE 0
-#define NL_EVENT_TYPE_ACTIVE 1
-
 struct idletimer_tg_info {
 	__u32 timeout;
 
 	char label[MAX_IDLETIMER_LABEL_SIZE];
 
-	/* Use netlink messages for notification in addition to sysfs */
-	__u8 send_nl_msg;
-
 	/* for kernel module internal use only */
 	struct idletimer_tg *timer __attribute__((aligned(8)));
 };
diff --git a/original/uapi/linux/nfs3.h b/original/uapi/linux/nfs3.h
index 37e4b34..c22ab77 100644
--- a/original/uapi/linux/nfs3.h
+++ b/original/uapi/linux/nfs3.h
@@ -63,6 +63,12 @@
 	NF3BAD  = 8
 };
 
+enum nfs3_time_how {
+	DONT_CHANGE		= 0,
+	SET_TO_SERVER_TIME	= 1,
+	SET_TO_CLIENT_TIME	= 2,
+};
+
 struct nfs3_fh {
 	unsigned short size;
 	unsigned char  data[NFS3_FHSIZE];
diff --git a/original/uapi/linux/nl80211.h b/original/uapi/linux/nl80211.h
index 40832d1..ac78da9 100644
--- a/original/uapi/linux/nl80211.h
+++ b/original/uapi/linux/nl80211.h
@@ -1963,8 +1963,15 @@
  * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire
  *	probe-response frame. The DA field in the 802.11 header is zero-ed out,
  *	to be filled by the FW.
- * @NL80211_ATTR_DISABLE_HT:  Force HT capable interfaces to disable
- *      this feature.  Currently, only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
+ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable
+ *      this feature during association. This is a flag attribute.
+ *	Currently only supported in mac80211 drivers.
  * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the
  *      ATTR_HT_CAPABILITY to which attention should be paid.
  *      Currently, only mac80211 NICs support this feature.
@@ -3045,6 +3052,8 @@
 
 	NL80211_ATTR_SAR_SPEC,
 
+	NL80211_ATTR_DISABLE_HE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
diff --git a/original/uapi/linux/openat2.h b/original/uapi/linux/openat2.h
index 58b1eb7..a5feb76 100644
--- a/original/uapi/linux/openat2.h
+++ b/original/uapi/linux/openat2.h
@@ -35,5 +35,9 @@
 #define RESOLVE_IN_ROOT		0x10 /* Make all jumps to "/" and ".."
 					be scoped inside the dirfd
 					(similar to chroot(2)). */
+#define RESOLVE_CACHED		0x20 /* Only complete if resolution can be
+					completed through cached lookup. May
+					return -EAGAIN if that's not
+					possible. */
 
 #endif /* _UAPI_LINUX_OPENAT2_H */
diff --git a/original/uapi/linux/perf_event.h b/original/uapi/linux/perf_event.h
index b15e344..ad15e40 100644
--- a/original/uapi/linux/perf_event.h
+++ b/original/uapi/linux/perf_event.h
@@ -145,12 +145,14 @@
 	PERF_SAMPLE_CGROUP			= 1U << 21,
 	PERF_SAMPLE_DATA_PAGE_SIZE		= 1U << 22,
 	PERF_SAMPLE_CODE_PAGE_SIZE		= 1U << 23,
+	PERF_SAMPLE_WEIGHT_STRUCT		= 1U << 24,
 
-	PERF_SAMPLE_MAX = 1U << 24,		/* non-ABI */
+	PERF_SAMPLE_MAX = 1U << 25,		/* non-ABI */
 
 	__PERF_SAMPLE_CALLCHAIN_EARLY		= 1ULL << 63, /* non-ABI; internal use */
 };
 
+#define PERF_SAMPLE_WEIGHT_TYPE	(PERF_SAMPLE_WEIGHT | PERF_SAMPLE_WEIGHT_STRUCT)
 /*
  * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
  *
@@ -386,7 +388,8 @@
 				aux_output     :  1, /* generate AUX records instead of events */
 				cgroup         :  1, /* include cgroup events */
 				text_poke      :  1, /* include text poke events */
-				__reserved_1   : 30;
+				build_id       :  1, /* use build id in mmap2 events */
+				__reserved_1   : 29;
 
 	union {
 		__u32		wakeup_events;	  /* wakeup every n events */
@@ -659,6 +662,22 @@
 	__u64	aux_size;
 };
 
+/*
+ * The current state of perf_event_header::misc bits usage:
+ * ('|' used bit, '-' unused bit)
+ *
+ *  012         CDEF
+ *  |||---------||||
+ *
+ *  Where:
+ *    0-2     CPUMODE_MASK
+ *
+ *    C       PROC_MAP_PARSE_TIMEOUT
+ *    D       MMAP_DATA / COMM_EXEC / FORK_EXEC / SWITCH_OUT
+ *    E       MMAP_BUILD_ID / EXACT_IP / SCHED_OUT_PREEMPT
+ *    F       (reserved)
+ */
+
 #define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
 #define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
 #define PERF_RECORD_MISC_KERNEL			(1 << 0)
@@ -690,6 +709,7 @@
  *
  *   PERF_RECORD_MISC_EXACT_IP           - PERF_RECORD_SAMPLE of precise events
  *   PERF_RECORD_MISC_SWITCH_OUT_PREEMPT - PERF_RECORD_SWITCH* events
+ *   PERF_RECORD_MISC_MMAP_BUILD_ID      - PERF_RECORD_MMAP2 event
  *
  *
  * PERF_RECORD_MISC_EXACT_IP:
@@ -699,9 +719,13 @@
  *
  * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT:
  *   Indicates that thread was preempted in TASK_RUNNING state.
+ *
+ * PERF_RECORD_MISC_MMAP_BUILD_ID:
+ *   Indicates that mmap2 event carries build id data.
  */
 #define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
 #define PERF_RECORD_MISC_SWITCH_OUT_PREEMPT	(1 << 14)
+#define PERF_RECORD_MISC_MMAP_BUILD_ID		(1 << 14)
 /*
  * Reserve the last bit to indicate some extended misc field
  */
@@ -890,7 +914,24 @@
 	 * 	  char			data[size];
 	 * 	  u64			dyn_size; } && PERF_SAMPLE_STACK_USER
 	 *
-	 *	{ u64			weight;   } && PERF_SAMPLE_WEIGHT
+	 *	{ union perf_sample_weight
+	 *	 {
+	 *		u64		full; && PERF_SAMPLE_WEIGHT
+	 *	#if defined(__LITTLE_ENDIAN_BITFIELD)
+	 *		struct {
+	 *			u32	var1_dw;
+	 *			u16	var2_w;
+	 *			u16	var3_w;
+	 *		} && PERF_SAMPLE_WEIGHT_STRUCT
+	 *	#elif defined(__BIG_ENDIAN_BITFIELD)
+	 *		struct {
+	 *			u16	var3_w;
+	 *			u16	var2_w;
+	 *			u32	var1_dw;
+	 *		} && PERF_SAMPLE_WEIGHT_STRUCT
+	 *	#endif
+	 *	 }
+	 *	}
 	 *	{ u64			data_src; } && PERF_SAMPLE_DATA_SRC
 	 *	{ u64			transaction; } && PERF_SAMPLE_TRANSACTION
 	 *	{ u64			abi; # enum perf_sample_regs_abi
@@ -915,10 +956,20 @@
 	 *	u64				addr;
 	 *	u64				len;
 	 *	u64				pgoff;
-	 *	u32				maj;
-	 *	u32				min;
-	 *	u64				ino;
-	 *	u64				ino_generation;
+	 *	union {
+	 *		struct {
+	 *			u32		maj;
+	 *			u32		min;
+	 *			u64		ino;
+	 *			u64		ino_generation;
+	 *		};
+	 *		struct {
+	 *			u8		build_id_size;
+	 *			u8		__reserved_1;
+	 *			u16		__reserved_2;
+	 *			u8		build_id[20];
+	 *		};
+	 *	};
 	 *	u32				prot, flags;
 	 *	char				filename[];
 	 * 	struct sample_id		sample_id;
@@ -1127,14 +1178,16 @@
 			mem_lvl_num:4,	/* memory hierarchy level number */
 			mem_remote:1,   /* remote */
 			mem_snoopx:2,	/* snoop mode, ext */
-			mem_rsvd:24;
+			mem_blk:3,	/* access blocked */
+			mem_rsvd:21;
 	};
 };
 #elif defined(__BIG_ENDIAN_BITFIELD)
 union perf_mem_data_src {
 	__u64 val;
 	struct {
-		__u64	mem_rsvd:24,
+		__u64	mem_rsvd:21,
+			mem_blk:3,	/* access blocked */
 			mem_snoopx:2,	/* snoop mode, ext */
 			mem_remote:1,   /* remote */
 			mem_lvl_num:4,	/* memory hierarchy level number */
@@ -1217,6 +1270,12 @@
 #define PERF_MEM_TLB_OS		0x40 /* OS fault handler */
 #define PERF_MEM_TLB_SHIFT	26
 
+/* Access blocked */
+#define PERF_MEM_BLK_NA		0x01 /* not available */
+#define PERF_MEM_BLK_DATA	0x02 /* data could not be forwarded */
+#define PERF_MEM_BLK_ADDR	0x04 /* address conflict */
+#define PERF_MEM_BLK_SHIFT	40
+
 #define PERF_MEM_S(a, s) \
 	(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
 
@@ -1248,4 +1307,23 @@
 		reserved:40;
 };
 
+union perf_sample_weight {
+	__u64		full;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	struct {
+		__u32	var1_dw;
+		__u16	var2_w;
+		__u16	var3_w;
+	};
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	struct {
+		__u16	var3_w;
+		__u16	var2_w;
+		__u32	var1_dw;
+	};
+#else
+#error "Unknown endianness"
+#endif
+};
+
 #endif /* _UAPI_LINUX_PERF_EVENT_H */
diff --git a/original/uapi/linux/pkt_cls.h b/original/uapi/linux/pkt_cls.h
index ee95f42..7ea59cf 100644
--- a/original/uapi/linux/pkt_cls.h
+++ b/original/uapi/linux/pkt_cls.h
@@ -591,6 +591,9 @@
 	TCA_FLOWER_KEY_CT_FLAGS_ESTABLISHED = 1 << 1, /* Part of an existing connection. */
 	TCA_FLOWER_KEY_CT_FLAGS_RELATED = 1 << 2, /* Related to an established connection. */
 	TCA_FLOWER_KEY_CT_FLAGS_TRACKED = 1 << 3, /* Conntrack has occurred. */
+	TCA_FLOWER_KEY_CT_FLAGS_INVALID = 1 << 4, /* Conntrack is invalid. */
+	TCA_FLOWER_KEY_CT_FLAGS_REPLY = 1 << 5, /* Packet is in the reply direction. */
+	__TCA_FLOWER_KEY_CT_FLAGS_MAX,
 };
 
 enum {
diff --git a/original/uapi/linux/pkt_sched.h b/original/uapi/linux/pkt_sched.h
index 9e7c2c6..79a699f 100644
--- a/original/uapi/linux/pkt_sched.h
+++ b/original/uapi/linux/pkt_sched.h
@@ -434,6 +434,7 @@
 	TCA_HTB_RATE64,
 	TCA_HTB_CEIL64,
 	TCA_HTB_PAD,
+	TCA_HTB_OFFLOAD,
 	__TCA_HTB_MAX,
 };
 
diff --git a/original/uapi/linux/psample.h b/original/uapi/linux/psample.h
index aea26ab..bff5032 100644
--- a/original/uapi/linux/psample.h
+++ b/original/uapi/linux/psample.h
@@ -3,7 +3,6 @@
 #define __UAPI_PSAMPLE_H
 
 enum {
-	/* sampled packet metadata */
 	PSAMPLE_ATTR_IIFINDEX,
 	PSAMPLE_ATTR_OIFINDEX,
 	PSAMPLE_ATTR_ORIGSIZE,
@@ -11,10 +10,8 @@
 	PSAMPLE_ATTR_GROUP_SEQ,
 	PSAMPLE_ATTR_SAMPLE_RATE,
 	PSAMPLE_ATTR_DATA,
-	PSAMPLE_ATTR_TUNNEL,
-
-	/* commands attributes */
 	PSAMPLE_ATTR_GROUP_REFCOUNT,
+	PSAMPLE_ATTR_TUNNEL,
 
 	__PSAMPLE_ATTR_MAX
 };
diff --git a/original/uapi/linux/rfkill.h b/original/uapi/linux/rfkill.h
index 03e8af8..9b77cfc 100644
--- a/original/uapi/linux/rfkill.h
+++ b/original/uapi/linux/rfkill.h
@@ -86,8 +86,6 @@
  * @op: operation code
  * @hard: hard state (0/1)
  * @soft: soft state (0/1)
- * @hard_block_reasons: valid if hard is set. One or several reasons from
- *	&enum rfkill_hard_block_reasons.
  *
  * Structure used for userspace communication on /dev/rfkill,
  * used for events from the kernel and control to the kernel.
@@ -98,22 +96,80 @@
 	__u8  op;
 	__u8  soft;
 	__u8  hard;
+} __attribute__((packed));
+
+/**
+ * struct rfkill_event_ext - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ * @hard_block_reasons: valid if hard is set. One or several reasons from
+ *	&enum rfkill_hard_block_reasons.
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ *
+ * See the extensibility docs below.
+ */
+struct rfkill_event_ext {
+	__u32 idx;
+	__u8  type;
+	__u8  op;
+	__u8  soft;
+	__u8  hard;
+
+	/*
+	 * older kernels will accept/send only up to this point,
+	 * and if extended further up to any chunk marked below
+	 */
+
 	__u8  hard_block_reasons;
 } __attribute__((packed));
 
-/*
- * We are planning to be backward and forward compatible with changes
- * to the event struct, by adding new, optional, members at the end.
- * When reading an event (whether the kernel from userspace or vice
- * versa) we need to accept anything that's at least as large as the
- * version 1 event size, but might be able to accept other sizes in
- * the future.
+/**
+ * DOC: Extensibility
  *
- * One exception is the kernel -- we already have two event sizes in
- * that we've made the 'hard' member optional since our only option
- * is to ignore it anyway.
+ * Originally, we had planned to allow backward and forward compatible
+ * changes by just adding fields at the end of the structure that are
+ * then not reported on older kernels on read(), and not written to by
+ * older kernels on write(), with the kernel reporting the size it did
+ * accept as the result.
+ *
+ * This would have allowed userspace to detect on read() and write()
+ * which kernel structure version it was dealing with, and if was just
+ * recompiled it would have gotten the new fields, but obviously not
+ * accessed them, but things should've continued to work.
+ *
+ * Unfortunately, while actually exercising this mechanism to add the
+ * hard block reasons field, we found that userspace (notably systemd)
+ * did all kinds of fun things not in line with this scheme:
+ *
+ * 1. treat the (expected) short writes as an error;
+ * 2. ask to read sizeof(struct rfkill_event) but then compare the
+ *    actual return value to RFKILL_EVENT_SIZE_V1 and treat any
+ *    mismatch as an error.
+ *
+ * As a consequence, just recompiling with a new struct version caused
+ * things to no longer work correctly on old and new kernels.
+ *
+ * Hence, we've rolled back &struct rfkill_event to the original version
+ * and added &struct rfkill_event_ext. This effectively reverts to the
+ * old behaviour for all userspace, unless it explicitly opts in to the
+ * rules outlined here by using the new &struct rfkill_event_ext.
+ *
+ * Userspace using &struct rfkill_event_ext must adhere to the following
+ * rules
+ *
+ * 1. accept short writes, optionally using them to detect that it's
+ *    running on an older kernel;
+ * 2. accept short reads, knowing that this means it's running on an
+ *    older kernel;
+ * 3. treat reads that are as long as requested as acceptable, not
+ *    checking against RFKILL_EVENT_SIZE_V1 or such.
  */
-#define RFKILL_EVENT_SIZE_V1	8
+#define RFKILL_EVENT_SIZE_V1	sizeof(struct rfkill_event)
 
 /* ioctl for turning off rfkill-input (if present) */
 #define RFKILL_IOC_MAGIC	'R'
diff --git a/original/uapi/linux/rtc.h b/original/uapi/linux/rtc.h
index fa9aff9..f950bff 100644
--- a/original/uapi/linux/rtc.h
+++ b/original/uapi/linux/rtc.h
@@ -110,6 +110,11 @@
 #define RTC_AF 0x20	/* Alarm interrupt */
 #define RTC_UF 0x10	/* Update interrupt for 1Hz RTC */
 
+/* feature list */
+#define RTC_FEATURE_ALARM		0
+#define RTC_FEATURE_ALARM_RES_MINUTE	1
+#define RTC_FEATURE_NEED_WEEK_DAY	2
+#define RTC_FEATURE_CNT			3
 
 #define RTC_MAX_FREQ	8192
 
diff --git a/original/uapi/linux/rtnetlink.h b/original/uapi/linux/rtnetlink.h
index b841caa..91e4ca0 100644
--- a/original/uapi/linux/rtnetlink.h
+++ b/original/uapi/linux/rtnetlink.h
@@ -319,6 +319,11 @@
 #define RTM_F_FIB_MATCH	        0x2000	/* return full fib lookup match */
 #define RTM_F_OFFLOAD		0x4000	/* route is offloaded */
 #define RTM_F_TRAP		0x8000	/* route is trapping packets */
+#define RTM_F_OFFLOAD_FAILED	0x20000000 /* route offload failed, this value
+					    * is chosen to avoid conflicts with
+					    * other flags defined in
+					    * include/uapi/linux/ipv6_route.h
+					    */
 
 /* Reserved table identifiers */
 
diff --git a/original/uapi/linux/serial_core.h b/original/uapi/linux/serial_core.h
index 62c2204..c4042dc 100644
--- a/original/uapi/linux/serial_core.h
+++ b/original/uapi/linux/serial_core.h
@@ -208,9 +208,6 @@
 /* Atheros AR933X SoC */
 #define PORT_AR933X	99
 
-/* Energy Micro efm32 SoC */
-#define PORT_EFMUART   100
-
 /* ARC (Synopsys) on-chip UART */
 #define PORT_ARC       101
 
diff --git a/original/uapi/linux/spi/spi.h b/original/uapi/linux/spi/spi.h
new file mode 100644
index 0000000..236a85f
--- /dev/null
+++ b/original/uapi/linux/spi/spi.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+#ifndef _UAPI_SPI_H
+#define _UAPI_SPI_H
+
+#include <linux/const.h>
+
+#define	SPI_CPHA		_BITUL(0)	/* clock phase */
+#define	SPI_CPOL		_BITUL(1)	/* clock polarity */
+
+#define	SPI_MODE_0		(0|0)		/* (original MicroWire) */
+#define	SPI_MODE_1		(0|SPI_CPHA)
+#define	SPI_MODE_2		(SPI_CPOL|0)
+#define	SPI_MODE_3		(SPI_CPOL|SPI_CPHA)
+#define	SPI_MODE_X_MASK		(SPI_CPOL|SPI_CPHA)
+
+#define	SPI_CS_HIGH		_BITUL(2)	/* chipselect active high? */
+#define	SPI_LSB_FIRST		_BITUL(3)	/* per-word bits-on-wire */
+#define	SPI_3WIRE		_BITUL(4)	/* SI/SO signals shared */
+#define	SPI_LOOP		_BITUL(5)	/* loopback mode */
+#define	SPI_NO_CS		_BITUL(6)	/* 1 dev/bus, no chipselect */
+#define	SPI_READY		_BITUL(7)	/* slave pulls low to pause */
+#define	SPI_TX_DUAL		_BITUL(8)	/* transmit with 2 wires */
+#define	SPI_TX_QUAD		_BITUL(9)	/* transmit with 4 wires */
+#define	SPI_RX_DUAL		_BITUL(10)	/* receive with 2 wires */
+#define	SPI_RX_QUAD		_BITUL(11)	/* receive with 4 wires */
+#define	SPI_CS_WORD		_BITUL(12)	/* toggle cs after each word */
+#define	SPI_TX_OCTAL		_BITUL(13)	/* transmit with 8 wires */
+#define	SPI_RX_OCTAL		_BITUL(14)	/* receive with 8 wires */
+#define	SPI_3WIRE_HIZ		_BITUL(15)	/* high impedance turnaround */
+
+/*
+ * All the bits defined above should be covered by SPI_MODE_USER_MASK.
+ * The SPI_MODE_USER_MASK has the SPI_MODE_KERNEL_MASK counterpart in
+ * 'include/linux/spi/spi.h'. The bits defined here are from bit 0 upwards
+ * while in SPI_MODE_KERNEL_MASK they are from the other end downwards.
+ * These bits must not overlap. A static assert check should make sure of that.
+ * If adding extra bits, make sure to increase the bit index below as well.
+ */
+#define SPI_MODE_USER_MASK	(_BITUL(16) - 1)
+
+#endif /* _UAPI_SPI_H */
diff --git a/original/uapi/linux/spi/spidev.h b/original/uapi/linux/spi/spidev.h
index d56427c..0c3da08 100644
--- a/original/uapi/linux/spi/spidev.h
+++ b/original/uapi/linux/spi/spidev.h
@@ -25,35 +25,7 @@
 
 #include <linux/types.h>
 #include <linux/ioctl.h>
-
-/* User space versions of kernel symbols for SPI clocking modes,
- * matching <linux/spi/spi.h>
- */
-
-#define SPI_CPHA		0x01
-#define SPI_CPOL		0x02
-
-#define SPI_MODE_0		(0|0)
-#define SPI_MODE_1		(0|SPI_CPHA)
-#define SPI_MODE_2		(SPI_CPOL|0)
-#define SPI_MODE_3		(SPI_CPOL|SPI_CPHA)
-
-#define SPI_CS_HIGH		0x04
-#define SPI_LSB_FIRST		0x08
-#define SPI_3WIRE		0x10
-#define SPI_LOOP		0x20
-#define SPI_NO_CS		0x40
-#define SPI_READY		0x80
-#define SPI_TX_DUAL		0x100
-#define SPI_TX_QUAD		0x200
-#define SPI_RX_DUAL		0x400
-#define SPI_RX_QUAD		0x800
-#define SPI_CS_WORD		0x1000
-#define SPI_TX_OCTAL		0x2000
-#define SPI_RX_OCTAL		0x4000
-#define SPI_3WIRE_HIZ		0x8000
-
-/*---------------------------------------------------------------------------*/
+#include <linux/spi/spi.h>
 
 /* IOCTL commands */
 
diff --git a/original/uapi/linux/surface_aggregator/cdev.h b/original/uapi/linux/surface_aggregator/cdev.h
new file mode 100644
index 0000000..fbcce04
--- /dev/null
+++ b/original/uapi/linux/surface_aggregator/cdev.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Surface System Aggregator Module (SSAM) user-space EC interface.
+ *
+ * Definitions, structs, and IOCTLs for the /dev/surface/aggregator misc
+ * device. This device provides direct user-space access to the SSAM EC.
+ * Intended for debugging and development.
+ *
+ * Copyright (C) 2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H
+#define _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/**
+ * enum ssam_cdev_request_flags - Request flags for SSAM cdev request IOCTL.
+ *
+ * @SSAM_CDEV_REQUEST_HAS_RESPONSE:
+ *	Specifies that the request expects a response. If not set, the request
+ *	will be directly completed after its underlying packet has been
+ *	transmitted. If set, the request transport system waits for a response
+ *	of the request.
+ *
+ * @SSAM_CDEV_REQUEST_UNSEQUENCED:
+ *	Specifies that the request should be transmitted via an unsequenced
+ *	packet. If set, the request must not have a response, meaning that this
+ *	flag and the %SSAM_CDEV_REQUEST_HAS_RESPONSE flag are mutually
+ *	exclusive.
+ */
+enum ssam_cdev_request_flags {
+	SSAM_CDEV_REQUEST_HAS_RESPONSE = 0x01,
+	SSAM_CDEV_REQUEST_UNSEQUENCED  = 0x02,
+};
+
+/**
+ * struct ssam_cdev_request - Controller request IOCTL argument.
+ * @target_category: Target category of the SAM request.
+ * @target_id:       Target ID of the SAM request.
+ * @command_id:      Command ID of the SAM request.
+ * @instance_id:     Instance ID of the SAM request.
+ * @flags:           Request flags (see &enum ssam_cdev_request_flags).
+ * @status:          Request status (output).
+ * @payload:         Request payload (input data).
+ * @payload.data:    Pointer to request payload data.
+ * @payload.length:  Length of request payload data (in bytes).
+ * @response:        Request response (output data).
+ * @response.data:   Pointer to response buffer.
+ * @response.length: On input: Capacity of response buffer (in bytes).
+ *                   On output: Length of request response (number of bytes
+ *                   in the buffer that are actually used).
+ */
+struct ssam_cdev_request {
+	__u8 target_category;
+	__u8 target_id;
+	__u8 command_id;
+	__u8 instance_id;
+	__u16 flags;
+	__s16 status;
+
+	struct {
+		__u64 data;
+		__u16 length;
+		__u8 __pad[6];
+	} payload;
+
+	struct {
+		__u64 data;
+		__u16 length;
+		__u8 __pad[6];
+	} response;
+} __attribute__((__packed__));
+
+#define SSAM_CDEV_REQUEST	_IOWR(0xA5, 1, struct ssam_cdev_request)
+
+#endif /* _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H */
diff --git a/original/uapi/linux/sysctl.h b/original/uapi/linux/sysctl.h
index 458179d..1e05d3c 100644
--- a/original/uapi/linux/sysctl.h
+++ b/original/uapi/linux/sysctl.h
@@ -571,6 +571,7 @@
 	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
 	NET_IPV6_ACCEPT_RA_FROM_LOCAL=26,
 	NET_IPV6_ACCEPT_RA_RT_INFO_MIN_PLEN=27,
+	NET_IPV6_RA_DEFRTR_METRIC=28,
 	__NET_IPV6_MAX
 };
 
diff --git a/original/uapi/linux/tcp.h b/original/uapi/linux/tcp.h
index 13ceeb3..8fc09e8 100644
--- a/original/uapi/linux/tcp.h
+++ b/original/uapi/linux/tcp.h
@@ -51,7 +51,7 @@
 		fin:1;
 #else
 #error	"Adjust your <asm/byteorder.h> defines"
-#endif	
+#endif
 	__be16	window;
 	__sum16	check;
 	__be16	urg_ptr;
@@ -62,14 +62,14 @@
  *  (union is compatible to any of its members)
  *  This means this part of the code is -fstrict-aliasing safe now.
  */
-union tcp_word_hdr { 
+union tcp_word_hdr {
 	struct tcphdr hdr;
-	__be32 		  words[5];
-}; 
+	__be32        words[5];
+};
 
-#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
+#define tcp_flag_word(tp) (((union tcp_word_hdr *)(tp))->words[3])
 
-enum { 
+enum {
 	TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
 	TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
 	TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
@@ -80,7 +80,7 @@
 	TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
 	TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
 	TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
-}; 
+};
 
 /*
  * TCP general constants
@@ -103,8 +103,8 @@
 #define TCP_QUICKACK		12	/* Block/reenable quick acks */
 #define TCP_CONGESTION		13	/* Congestion control algorithm */
 #define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
-#define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
-#define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
+#define TCP_THIN_LINEAR_TIMEOUTS 16	/* Use linear timeouts for thin streams*/
+#define TCP_THIN_DUPACK		17	/* Fast retrans. after 1 dupack */
 #define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
 #define TCP_REPAIR		19	/* TCP sock is under repair right now */
 #define TCP_REPAIR_QUEUE	20
@@ -314,6 +314,7 @@
 	TCP_NLA_TIMEOUT_REHASH, /* Timeout-triggered rehash attempts */
 	TCP_NLA_BYTES_NOTSENT,	/* Bytes in write queue not yet sent */
 	TCP_NLA_EDT,		/* Earliest departure time (CLOCK_MONOTONIC) */
+	TCP_NLA_TTL,		/* TTL or hop limit of a packet received */
 };
 
 /* for TCP_MD5SIG socket option */
@@ -353,5 +354,9 @@
 	__u64 copybuf_address;	/* in: copybuf address (small reads) */
 	__s32 copybuf_len; /* in/out: copybuf bytes avail/used or error */
 	__u32 flags; /* in: flags */
+	__u64 msg_control; /* ancillary data */
+	__u64 msg_controllen;
+	__u32 msg_flags;
+	__u32 reserved; /* set to 0 for now */
 };
 #endif /* _UAPI_LINUX_TCP_H */
diff --git a/original/uapi/linux/tee.h b/original/uapi/linux/tee.h
index d67cadf..25a6c53 100644
--- a/original/uapi/linux/tee.h
+++ b/original/uapi/linux/tee.h
@@ -355,7 +355,7 @@
 };
 
 /**
- * TEE_IOC_SUPPL_SEND - Receive a request for a supplicant function
+ * TEE_IOC_SUPPL_SEND - Send a response to a received request
  *
  * Takes a struct tee_ioctl_buf_data which contains a struct
  * tee_iocl_supp_send_arg followed by any array of struct tee_param
diff --git a/original/uapi/linux/termios.h b/original/uapi/linux/termios.h
index 33961d4..e6da9d4 100644
--- a/original/uapi/linux/termios.h
+++ b/original/uapi/linux/termios.h
@@ -5,19 +5,4 @@
 #include <linux/types.h>
 #include <asm/termios.h>
 
-#define NFF	5
-
-struct termiox
-{
-	__u16	x_hflag;
-	__u16	x_cflag;
-	__u16	x_rflag[NFF];
-	__u16	x_sflag;
-};
-
-#define	RTSXOFF		0x0001		/* RTS flow control on input */
-#define	CTSXON		0x0002		/* CTS flow control on output */
-#define	DTRXOFF		0x0004		/* DTR flow control on input */
-#define DSRXON		0x0008		/* DCD flow control on output */
-
 #endif
diff --git a/original/uapi/linux/usb/ch9.h b/original/uapi/linux/usb/ch9.h
index 0f865ae..17ce561 100644
--- a/original/uapi/linux/usb/ch9.h
+++ b/original/uapi/linux/usb/ch9.h
@@ -968,9 +968,22 @@
 	__le32 bmSublinkSpeedAttr[1]; /* list of sublink speed attrib entries */
 #define USB_SSP_SUBLINK_SPEED_SSID	(0xf)		/* sublink speed ID */
 #define USB_SSP_SUBLINK_SPEED_LSE	(0x3 << 4)	/* Lanespeed exponent */
+#define USB_SSP_SUBLINK_SPEED_LSE_BPS		0
+#define USB_SSP_SUBLINK_SPEED_LSE_KBPS		1
+#define USB_SSP_SUBLINK_SPEED_LSE_MBPS		2
+#define USB_SSP_SUBLINK_SPEED_LSE_GBPS		3
+
 #define USB_SSP_SUBLINK_SPEED_ST	(0x3 << 6)	/* Sublink type */
+#define USB_SSP_SUBLINK_SPEED_ST_SYM_RX		0
+#define USB_SSP_SUBLINK_SPEED_ST_ASYM_RX	1
+#define USB_SSP_SUBLINK_SPEED_ST_SYM_TX		2
+#define USB_SSP_SUBLINK_SPEED_ST_ASYM_TX	3
+
 #define USB_SSP_SUBLINK_SPEED_RSVD	(0x3f << 8)	/* Reserved */
 #define USB_SSP_SUBLINK_SPEED_LP	(0x3 << 14)	/* Link protocol */
+#define USB_SSP_SUBLINK_SPEED_LP_SS		0
+#define USB_SSP_SUBLINK_SPEED_LP_SSP		1
+
 #define USB_SSP_SUBLINK_SPEED_LSM	(0xff << 16)	/* Lanespeed mantissa */
 } __attribute__((packed));
 
diff --git a/original/uapi/linux/usb/tmc.h b/original/uapi/linux/usb/tmc.h
index fdd4d88..d791cc5 100644
--- a/original/uapi/linux/usb/tmc.h
+++ b/original/uapi/linux/usb/tmc.h
@@ -102,6 +102,9 @@
 #define USBTMC_IOCTL_MSG_IN_ATTR	_IOR(USBTMC_IOC_NR, 24, __u8)
 #define USBTMC_IOCTL_AUTO_ABORT		_IOW(USBTMC_IOC_NR, 25, __u8)
 
+#define USBTMC_IOCTL_GET_STB            _IOR(USBTMC_IOC_NR, 26, __u8)
+#define USBTMC_IOCTL_GET_SRQ_STB        _IOR(USBTMC_IOC_NR, 27, __u8)
+
 /* Cancel and cleanup asynchronous calls */
 #define USBTMC_IOCTL_CANCEL_IO		_IO(USBTMC_IOC_NR, 35)
 #define USBTMC_IOCTL_CLEANUP_IO		_IO(USBTMC_IOC_NR, 36)
diff --git a/original/uapi/linux/v4l2-controls.h b/original/uapi/linux/v4l2-controls.h
index 823b214..039c0d7 100644
--- a/original/uapi/linux/v4l2-controls.h
+++ b/original/uapi/linux/v4l2-controls.h
@@ -204,6 +204,11 @@
  * We reserve 16 controls for this driver.
  */
 #define V4L2_CID_USER_CODA_BASE			(V4L2_CID_USER_BASE + 0x10e0)
+/*
+ * The base for MIPI CCS driver controls.
+ * We reserve 128 controls for this driver.
+ */
+#define V4L2_CID_USER_CCS_BASE			(V4L2_CID_USER_BASE + 0x10f0)
 
 /* MPEG-class control IDs */
 /* The MPEG controls are applicable to all codec controls
@@ -422,6 +427,7 @@
 #define V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE		(V4L2_CID_CODEC_BASE+227)
 #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE		(V4L2_CID_CODEC_BASE+228)
 #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME		(V4L2_CID_CODEC_BASE+229)
+#define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID	(V4L2_CID_CODEC_BASE+230)
 
 /* CIDs for the MPEG-2 Part 2 (H.262) codec */
 #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL			(V4L2_CID_CODEC_BASE+270)
@@ -585,6 +591,15 @@
 #define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP	(V4L2_CID_CODEC_BASE+386)
 #define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP	(V4L2_CID_CODEC_BASE+387)
 #define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP	(V4L2_CID_CODEC_BASE+388)
+#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP	(V4L2_CID_CODEC_BASE+389)
+#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP	(V4L2_CID_CODEC_BASE+390)
+#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L0_BR	(V4L2_CID_CODEC_BASE+391)
+#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L1_BR	(V4L2_CID_CODEC_BASE+392)
+#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L2_BR	(V4L2_CID_CODEC_BASE+393)
+#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L3_BR	(V4L2_CID_CODEC_BASE+394)
+#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L4_BR	(V4L2_CID_CODEC_BASE+395)
+#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L5_BR	(V4L2_CID_CODEC_BASE+396)
+#define V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L6_BR	(V4L2_CID_CODEC_BASE+397)
 #define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP	(V4L2_CID_CODEC_BASE+400)
 #define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP	(V4L2_CID_CODEC_BASE+401)
 #define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP	(V4L2_CID_CODEC_BASE+402)
@@ -775,6 +790,13 @@
 	V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT	= 2,
 };
 
+#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP        (V4L2_CID_CODEC_BASE + 647)
+#define V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP        (V4L2_CID_CODEC_BASE + 648)
+#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP        (V4L2_CID_CODEC_BASE + 649)
+#define V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP        (V4L2_CID_CODEC_BASE + 650)
+#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP        (V4L2_CID_CODEC_BASE + 651)
+#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP        (V4L2_CID_CODEC_BASE + 652)
+
 /*  MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
 #define V4L2_CID_CODEC_CX2341X_BASE				(V4L2_CTRL_CLASS_CODEC | 0x1000)
 #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE		(V4L2_CID_CODEC_CX2341X_BASE+0)
diff --git a/original/uapi/linux/vdpa.h b/original/uapi/linux/vdpa.h
new file mode 100644
index 0000000..66a41e4
--- /dev/null
+++ b/original/uapi/linux/vdpa.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * vdpa device management interface
+ * Copyright (c) 2020 Mellanox Technologies Ltd. All rights reserved.
+ */
+
+#ifndef _UAPI_LINUX_VDPA_H_
+#define _UAPI_LINUX_VDPA_H_
+
+#define VDPA_GENL_NAME "vdpa"
+#define VDPA_GENL_VERSION 0x1
+
+enum vdpa_command {
+	VDPA_CMD_UNSPEC,
+	VDPA_CMD_MGMTDEV_NEW,
+	VDPA_CMD_MGMTDEV_GET,		/* can dump */
+	VDPA_CMD_DEV_NEW,
+	VDPA_CMD_DEV_DEL,
+	VDPA_CMD_DEV_GET,		/* can dump */
+};
+
+enum vdpa_attr {
+	VDPA_ATTR_UNSPEC,
+
+	/* bus name (optional) + dev name together make the parent device handle */
+	VDPA_ATTR_MGMTDEV_BUS_NAME,		/* string */
+	VDPA_ATTR_MGMTDEV_DEV_NAME,		/* string */
+	VDPA_ATTR_MGMTDEV_SUPPORTED_CLASSES,	/* u64 */
+
+	VDPA_ATTR_DEV_NAME,			/* string */
+	VDPA_ATTR_DEV_ID,			/* u32 */
+	VDPA_ATTR_DEV_VENDOR_ID,		/* u32 */
+	VDPA_ATTR_DEV_MAX_VQS,			/* u32 */
+	VDPA_ATTR_DEV_MAX_VQ_SIZE,		/* u16 */
+
+	/* new attributes must be added above here */
+	VDPA_ATTR_MAX,
+};
+
+#endif
diff --git a/original/uapi/linux/version.h b/original/uapi/linux/version.h
index edef7e7..535b224 100644
--- a/original/uapi/linux/version.h
+++ b/original/uapi/linux/version.h
@@ -1,2 +1,5 @@
-#define LINUX_VERSION_CODE 330496
-#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
+#define LINUX_VERSION_CODE 330752
+#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + ((c) > 255 ? 255 : (c)))
+#define LINUX_VERSION_MAJOR 5
+#define LINUX_VERSION_PATCHLEVEL 12
+#define LINUX_VERSION_SUBLEVEL 0
diff --git a/original/uapi/linux/vfio.h b/original/uapi/linux/vfio.h
index d181277..8ce36c1 100644
--- a/original/uapi/linux/vfio.h
+++ b/original/uapi/linux/vfio.h
@@ -46,6 +46,12 @@
  */
 #define VFIO_NOIOMMU_IOMMU		8
 
+/* Supports VFIO_DMA_UNMAP_FLAG_ALL */
+#define VFIO_UNMAP_ALL			9
+
+/* Supports the vaddr flag for DMA map and unmap */
+#define VFIO_UPDATE_VADDR		10
+
 /*
  * The IOCTL interface is designed for extensibility by embedding the
  * structure length (argsz) and flags into structures passed between
@@ -1074,12 +1080,22 @@
  *
  * Map process virtual addresses to IO virtual addresses using the
  * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
+ *
+ * If flags & VFIO_DMA_MAP_FLAG_VADDR, update the base vaddr for iova, and
+ * unblock translation of host virtual addresses in the iova range.  The vaddr
+ * must have previously been invalidated with VFIO_DMA_UNMAP_FLAG_VADDR.  To
+ * maintain memory consistency within the user application, the updated vaddr
+ * must address the same memory object as originally mapped.  Failure to do so
+ * will result in user memory corruption and/or device misbehavior.  iova and
+ * size must match those in the original MAP_DMA call.  Protection is not
+ * changed, and the READ & WRITE flags must be 0.
  */
 struct vfio_iommu_type1_dma_map {
 	__u32	argsz;
 	__u32	flags;
 #define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
 #define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
+#define VFIO_DMA_MAP_FLAG_VADDR (1 << 2)
 	__u64	vaddr;				/* Process virtual address */
 	__u64	iova;				/* IO virtual address */
 	__u64	size;				/* Size of mapping (bytes) */
@@ -1102,6 +1118,7 @@
  * field.  No guarantee is made to the user that arbitrary unmaps of iova
  * or size different from those used in the original mapping call will
  * succeed.
+ *
  * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap
  * before unmapping IO virtual addresses. When this flag is set, the user must
  * provide a struct vfio_bitmap in data[]. User must provide zero-allocated
@@ -1111,11 +1128,21 @@
  * indicates that the page at that offset from iova is dirty. A Bitmap of the
  * pages in the range of unmapped size is returned in the user-provided
  * vfio_bitmap.data.
+ *
+ * If flags & VFIO_DMA_UNMAP_FLAG_ALL, unmap all addresses.  iova and size
+ * must be 0.  This cannot be combined with the get-dirty-bitmap flag.
+ *
+ * If flags & VFIO_DMA_UNMAP_FLAG_VADDR, do not unmap, but invalidate host
+ * virtual addresses in the iova range.  Tasks that attempt to translate an
+ * iova's vaddr will block.  DMA to already-mapped pages continues.  This
+ * cannot be combined with the get-dirty-bitmap flag.
  */
 struct vfio_iommu_type1_dma_unmap {
 	__u32	argsz;
 	__u32	flags;
 #define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0)
+#define VFIO_DMA_UNMAP_FLAG_ALL		     (1 << 1)
+#define VFIO_DMA_UNMAP_FLAG_VADDR	     (1 << 2)
 	__u64	iova;				/* IO virtual address */
 	__u64	size;				/* Size of mapping (bytes) */
 	__u8    data[];
diff --git a/original/uapi/linux/xattr.h b/original/uapi/linux/xattr.h
index d22191a..9463db2 100644
--- a/original/uapi/linux/xattr.h
+++ b/original/uapi/linux/xattr.h
@@ -18,11 +18,8 @@
 #if __UAPI_DEF_XATTR
 #define __USE_KERNEL_XATTR_DEFS
 
-#define XATTR_CREATE	 0x1	/* set value, fail if attr already exists */
-#define XATTR_REPLACE	 0x2	/* set value, fail if attr does not exist */
-#ifdef __KERNEL__ /* following is kernel internal, colocated for maintenance */
-#define XATTR_NOSECURITY 0x4	/* get value, do not involve security check */
-#endif
+#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
+#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
 #endif
 
 /* Namespaces */
diff --git a/original/uapi/misc/habanalabs.h b/original/uapi/misc/habanalabs.h
index dba3827..5a86b52 100644
--- a/original/uapi/misc/habanalabs.h
+++ b/original/uapi/misc/habanalabs.h
@@ -309,7 +309,9 @@
 	__u32 num_of_events;
 	__u32 device_id; /* PCI Device ID */
 	__u32 module_id; /* For mezzanine cards in servers (From OCP spec.) */
-	__u32 reserved[2];
+	__u32 reserved;
+	__u16 first_available_interrupt_id;
+	__u16 reserved2;
 	__u32 cpld_version;
 	__u32 psoc_pci_pll_nr;
 	__u32 psoc_pci_pll_nf;
@@ -320,6 +322,8 @@
 	__u8 pad[2];
 	__u8 cpucp_version[HL_INFO_VERSION_MAX_LEN];
 	__u8 card_name[HL_INFO_CARD_NAME_MAX_LEN];
+	__u64 reserved3;
+	__u64 dram_page_size;
 };
 
 struct hl_info_dram_usage {
@@ -327,6 +331,8 @@
 	__u64 ctx_dram_mem;
 };
 
+#define HL_BUSY_ENGINES_MASK_EXT_SIZE	2
+
 struct hl_info_hw_idle {
 	__u32 is_idle;
 	/*
@@ -339,7 +345,7 @@
 	 * Extended Bitmask of busy engines.
 	 * Bits definition is according to `enum <chip>_enging_id'.
 	 */
-	__u64 busy_engines_mask_ext;
+	__u64 busy_engines_mask_ext[HL_BUSY_ENGINES_MASK_EXT_SIZE];
 };
 
 struct hl_info_device_status {
@@ -408,10 +414,13 @@
  * struct hl_info_sync_manager - sync manager information
  * @first_available_sync_object: first available sob
  * @first_available_monitor: first available monitor
+ * @first_available_cq: first available cq
  */
 struct hl_info_sync_manager {
 	__u32 first_available_sync_object;
 	__u32 first_available_monitor;
+	__u32 first_available_cq;
+	__u32 reserved;
 };
 
 /**
@@ -604,11 +613,14 @@
 };
 
 /* SIGNAL and WAIT/COLLECTIVE_WAIT flags are mutually exclusive */
-#define HL_CS_FLAGS_FORCE_RESTORE	0x1
-#define HL_CS_FLAGS_SIGNAL		0x2
-#define HL_CS_FLAGS_WAIT		0x4
-#define HL_CS_FLAGS_COLLECTIVE_WAIT	0x8
-#define HL_CS_FLAGS_TIMESTAMP		0x20
+#define HL_CS_FLAGS_FORCE_RESTORE		0x1
+#define HL_CS_FLAGS_SIGNAL			0x2
+#define HL_CS_FLAGS_WAIT			0x4
+#define HL_CS_FLAGS_COLLECTIVE_WAIT		0x8
+#define HL_CS_FLAGS_TIMESTAMP			0x20
+#define HL_CS_FLAGS_STAGED_SUBMISSION		0x40
+#define HL_CS_FLAGS_STAGED_SUBMISSION_FIRST	0x80
+#define HL_CS_FLAGS_STAGED_SUBMISSION_LAST	0x100
 
 #define HL_CS_STATUS_SUCCESS		0
 
@@ -622,10 +634,17 @@
 	/* holds address of array of hl_cs_chunk for execution phase */
 	__u64 chunks_execute;
 
-	/* this holds address of array of hl_cs_chunk for store phase -
-	 * Currently not in use
-	 */
-	__u64 chunks_store;
+	union {
+		/* this holds address of array of hl_cs_chunk for store phase -
+		 * Currently not in use
+		 */
+		__u64 chunks_store;
+
+		/* Sequence number of a staged submission CS
+		 * valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set
+		 */
+		__u64 seq;
+	};
 
 	/* Number of chunks in restore phase array. Maximum number is
 	 * HL_MAX_JOBS_PER_CS
@@ -704,6 +723,8 @@
 #define HL_MEM_OP_MAP			2
 /* Opcode to unmap previously mapped host and device memory */
 #define HL_MEM_OP_UNMAP			3
+/* Opcode to map a hw block */
+#define HL_MEM_OP_MAP_BLOCK		4
 
 /* Memory flags */
 #define HL_MEM_CONTIGUOUS	0x1
@@ -758,6 +779,17 @@
 			__u64 mem_size;
 		} map_host;
 
+		/* HL_MEM_OP_MAP_BLOCK - map a hw block */
+		struct {
+			/*
+			 * HW block address to map, a handle and size will be
+			 * returned to the user and will be used to mmap the
+			 * relevant block. Only addresses from configuration
+			 * space are allowed.
+			 */
+			__u64 block_addr;
+		} map_block;
+
 		/* HL_MEM_OP_UNMAP - unmap host memory */
 		struct {
 			/* Virtual address returned from HL_MEM_OP_MAP */
@@ -784,10 +816,26 @@
 		__u64 device_virt_addr;
 
 		/*
-		 * Used for HL_MEM_OP_ALLOC. This is the assigned
-		 * handle for the allocated memory
+		 * Used in HL_MEM_OP_ALLOC
+		 * This is the assigned handle for the allocated memory
 		 */
 		__u64 handle;
+
+		struct {
+			/*
+			 * Used in HL_MEM_OP_MAP_BLOCK.
+			 * This is the assigned handle for the mapped block
+			 */
+			__u64 block_handle;
+
+			/*
+			 * Used in HL_MEM_OP_MAP_BLOCK
+			 * This is the size of the mapped block
+			 */
+			__u32 block_size;
+
+			__u32 pad;
+		};
 	};
 };
 
diff --git a/original/uapi/rdma/ib_user_ioctl_cmds.h b/original/uapi/rdma/ib_user_ioctl_cmds.h
index 7968a18..dafc7eb 100644
--- a/original/uapi/rdma/ib_user_ioctl_cmds.h
+++ b/original/uapi/rdma/ib_user_ioctl_cmds.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2018, Mellanox Technologies inc.  All rights reserved.
+ * Copyright (c) 2020, Intel Corporation. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -251,6 +252,7 @@
 	UVERBS_METHOD_MR_DESTROY,
 	UVERBS_METHOD_ADVISE_MR,
 	UVERBS_METHOD_QUERY_MR,
+	UVERBS_METHOD_REG_DMABUF_MR,
 };
 
 enum uverbs_attrs_mr_destroy_ids {
@@ -272,6 +274,18 @@
 	UVERBS_ATTR_QUERY_MR_RESP_IOVA,
 };
 
+enum uverbs_attrs_reg_dmabuf_mr_cmd_attr_ids {
+	UVERBS_ATTR_REG_DMABUF_MR_HANDLE,
+	UVERBS_ATTR_REG_DMABUF_MR_PD_HANDLE,
+	UVERBS_ATTR_REG_DMABUF_MR_OFFSET,
+	UVERBS_ATTR_REG_DMABUF_MR_LENGTH,
+	UVERBS_ATTR_REG_DMABUF_MR_IOVA,
+	UVERBS_ATTR_REG_DMABUF_MR_FD,
+	UVERBS_ATTR_REG_DMABUF_MR_ACCESS_FLAGS,
+	UVERBS_ATTR_REG_DMABUF_MR_RESP_LKEY,
+	UVERBS_ATTR_REG_DMABUF_MR_RESP_RKEY,
+};
+
 enum uverbs_attrs_create_counters_cmd_attr_ids {
 	UVERBS_ATTR_CREATE_COUNTERS_HANDLE,
 };