Snap for 8564071 from d90e62ae5d47f287942ffb7fe24d0751eec9d0f9 to mainline-tethering-release
Change-Id: Ie4c1889c4b814ab6d578dfc69eaa68d7b2808000
diff --git a/modified/scsi/scsi.h b/modified/scsi/scsi.h
index 04b4e1c..77ad18d 100644
--- a/modified/scsi/scsi.h
+++ b/modified/scsi/scsi.h
@@ -14,6 +14,7 @@
#include <scsi/scsi_common.h>
#endif /* __KERNEL__ */
#include <scsi/scsi_proto.h>
+#include <scsi/scsi_status.h>
#ifdef __KERNEL__
struct scsi_cmnd;
@@ -33,34 +34,8 @@
* possible channels, (target) ids, or luns on a given shost.
*/
#define SCAN_WILD_CARD ~0
-
-/** scsi_status_is_good - check the status return.
- *
- * @status: the status passed up from the driver (including host and
- * driver components)
- *
- * This returns true for known good conditions that may be treated as
- * command completed normally
- */
-static inline int scsi_status_is_good(int status)
-{
- /*
- * FIXME: bit0 is listed as reserved in SCSI-2, but is
- * significant in SCSI-3. For now, we follow the SCSI-2
- * behaviour and ignore reserved bits.
- */
- status &= 0xfe;
- return ((status == SAM_STAT_GOOD) ||
- (status == SAM_STAT_CONDITION_MET) ||
- /* Next two "intermediate" statuses are obsolete in SAM-4 */
- (status == SAM_STAT_INTERMEDIATE) ||
- (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
- /* FIXME: this is obsolete in SAM-3 */
- (status == SAM_STAT_COMMAND_TERMINATED));
-}
#endif /* __KERNEL__ */
-
/*
* standard mode-select header prepended to all mode-select commands
*/
@@ -93,111 +68,50 @@
{
return (lun & 0xff00) == SCSI_W_LUN_BASE;
}
+
+/**
+ * scsi_status_is_check_condition - check the status return.
+ *
+ * @status: the status passed up from the driver (including host and
+ * driver components)
+ *
+ * This returns true if the status code is SAM_STAT_CHECK_CONDITION.
+ */
+static inline int scsi_status_is_check_condition(int status)
+{
+ if (status < 0)
+ return false;
+ status &= 0xfe;
+ return status == SAM_STAT_CHECK_CONDITION;
+}
#endif /* __KERNEL__ */
-
/*
- * MESSAGE CODES
+ * Extended message codes.
*/
-#define COMMAND_COMPLETE 0x00
-#define EXTENDED_MESSAGE 0x01
#define EXTENDED_MODIFY_DATA_POINTER 0x00
#define EXTENDED_SDTR 0x01
#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
#define EXTENDED_WDTR 0x03
#define EXTENDED_PPR 0x04
#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05
-#define SAVE_POINTERS 0x02
-#define RESTORE_POINTERS 0x03
-#define DISCONNECT 0x04
-#define INITIATOR_ERROR 0x05
-#define ABORT_TASK_SET 0x06
-#define MESSAGE_REJECT 0x07
-#define NOP 0x08
-#define MSG_PARITY_ERROR 0x09
-#define LINKED_CMD_COMPLETE 0x0a
-#define LINKED_FLG_CMD_COMPLETE 0x0b
-#define TARGET_RESET 0x0c
-#define ABORT_TASK 0x0d
-#define CLEAR_TASK_SET 0x0e
-#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
-#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
-#define TERMINATE_IO_PROC 0x11 /* SCSI-II only */
-#define CLEAR_ACA 0x16
-#define LOGICAL_UNIT_RESET 0x17
-#define SIMPLE_QUEUE_TAG 0x20
-#define HEAD_OF_QUEUE_TAG 0x21
-#define ORDERED_QUEUE_TAG 0x22
-#define IGNORE_WIDE_RESIDUE 0x23
-#define ACA 0x24
-#define QAS_REQUEST 0x55
-
-/* Old SCSI2 names, don't use in new code */
-#define BUS_DEVICE_RESET TARGET_RESET
-#define ABORT ABORT_TASK_SET
#ifdef __KERNEL__
/*
- * Host byte codes
- */
-
-#define DID_OK 0x00 /* NO error */
-#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */
-#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */
-#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */
-#define DID_BAD_TARGET 0x04 /* BAD target. */
-#define DID_ABORT 0x05 /* Told to abort for some other reason */
-#define DID_PARITY 0x06 /* Parity error */
-#define DID_ERROR 0x07 /* Internal error */
-#define DID_RESET 0x08 /* Reset by somebody. */
-#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */
-#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */
-#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */
-#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */
-#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also
- * without decrementing the retry count */
-#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
- * and the driver blocked the port to
- * recover the link. Transport class will
- * retry or fail IO */
-#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */
-#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on
- * other paths */
-#define DID_NEXUS_FAILURE 0x11 /* Permanent nexus failure, retry on other
- * paths might yield different results */
-#define DID_ALLOC_FAILURE 0x12 /* Space allocation on the device failed */
-#define DID_MEDIUM_ERROR 0x13 /* Medium error */
-#define DID_TRANSPORT_MARGINAL 0x14 /* Transport marginal errors */
-#define DRIVER_OK 0x00 /* Driver status */
-
-/*
- * These indicate the error that occurred, and what is available.
- */
-
-#define DRIVER_BUSY 0x01
-#define DRIVER_SOFT 0x02
-#define DRIVER_MEDIA 0x03
-#define DRIVER_ERROR 0x04
-
-#define DRIVER_INVALID 0x05
-#define DRIVER_TIMEOUT 0x06
-#define DRIVER_HARD 0x07
-#define DRIVER_SENSE 0x08
-
-/*
* Internal return values.
*/
-
-#define NEEDS_RETRY 0x2001
-#define SUCCESS 0x2002
-#define FAILED 0x2003
-#define QUEUED 0x2004
-#define SOFT_ERROR 0x2005
-#define ADD_TO_MLQUEUE 0x2006
-#define TIMEOUT_ERROR 0x2007
-#define SCSI_RETURN_NOT_HANDLED 0x2008
-#define FAST_IO_FAIL 0x2009
+enum scsi_disposition {
+ NEEDS_RETRY = 0x2001,
+ SUCCESS = 0x2002,
+ FAILED = 0x2003,
+ QUEUED = 0x2004,
+ SOFT_ERROR = 0x2005,
+ ADD_TO_MLQUEUE = 0x2006,
+ TIMEOUT_ERROR = 0x2007,
+ SCSI_RETURN_NOT_HANDLED = 0x2008,
+ FAST_IO_FAIL = 0x2009,
+};
/*
* Midlevel queue return values.
@@ -213,14 +127,10 @@
* These are set by:
*
* status byte = set from target device
- * msg_byte = return status from host adapter itself.
+ * msg_byte (unused)
* host_byte = set by low-level driver to indicate status.
- * driver_byte = set by mid-level.
*/
-#define status_byte(result) (((result) >> 1) & 0x7f)
-#define msg_byte(result) (((result) >> 8) & 0xff)
#define host_byte(result) (((result) >> 16) & 0xff)
-#define driver_byte(result) (((result) >> 24) & 0xff)
#define sense_class(sense) (((sense) >> 4) & 0x7)
#define sense_error(sense) ((sense) & 0xf)
@@ -285,4 +195,35 @@
/* Used to obtain the PCI location of a device */
#define SCSI_IOCTL_GET_PCI 0x5387
+/** scsi_status_is_good - check the status return.
+ *
+ * @status: the status passed up from the driver (including host and
+ * driver components)
+ *
+ * This returns true for known good conditions that may be treated as
+ * command completed normally
+ */
+static inline bool scsi_status_is_good(int status)
+{
+ if (status < 0)
+ return false;
+
+ if (host_byte(status) == DID_NO_CONNECT)
+ return false;
+
+ /*
+ * FIXME: bit0 is listed as reserved in SCSI-2, but is
+ * significant in SCSI-3. For now, we follow the SCSI-2
+ * behaviour and ignore reserved bits.
+ */
+ status &= 0xfe;
+ return ((status == SAM_STAT_GOOD) ||
+ (status == SAM_STAT_CONDITION_MET) ||
+ /* Next two "intermediate" statuses are obsolete in SAM-4 */
+ (status == SAM_STAT_INTERMEDIATE) ||
+ (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
+ /* FIXME: this is obsolete in SAM-3 */
+ (status == SAM_STAT_COMMAND_TERMINATED));
+}
+
#endif /* _SCSI_SCSI_H */
diff --git a/modified/scsi/scsi_proto.h b/modified/scsi/scsi_proto.h
index a351801..3b9519b 100644
--- a/modified/scsi/scsi_proto.h
+++ b/modified/scsi/scsi_proto.h
@@ -191,40 +191,22 @@
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
* T10/1561-D Revision 4 Draft dated 7th November 2002.
*/
-#define SAM_STAT_GOOD 0x00
-#define SAM_STAT_CHECK_CONDITION 0x02
-#define SAM_STAT_CONDITION_MET 0x04
-#define SAM_STAT_BUSY 0x08
-#define SAM_STAT_INTERMEDIATE 0x10
-#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
-#define SAM_STAT_RESERVATION_CONFLICT 0x18
-#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
-#define SAM_STAT_TASK_SET_FULL 0x28
-#define SAM_STAT_ACA_ACTIVE 0x30
-#define SAM_STAT_TASK_ABORTED 0x40
+enum sam_status {
+ SAM_STAT_GOOD = 0x00,
+ SAM_STAT_CHECK_CONDITION = 0x02,
+ SAM_STAT_CONDITION_MET = 0x04,
+ SAM_STAT_BUSY = 0x08,
+ SAM_STAT_INTERMEDIATE = 0x10,
+ SAM_STAT_INTERMEDIATE_CONDITION_MET = 0x14,
+ SAM_STAT_RESERVATION_CONFLICT = 0x18,
+ SAM_STAT_COMMAND_TERMINATED = 0x22, /* obsolete in SAM-3 */
+ SAM_STAT_TASK_SET_FULL = 0x28,
+ SAM_STAT_ACA_ACTIVE = 0x30,
+ SAM_STAT_TASK_ABORTED = 0x40,
+};
#endif /* __KERNEL__ */
-/*
- * Status codes. These are deprecated as they are shifted 1 bit right
- * from those found in the SCSI standards. This causes confusion for
- * applications that are ported to several OSes. Prefer SAM Status codes
- * above.
- */
-
-#define GOOD 0x00
-#define CHECK_CONDITION 0x01
-#define CONDITION_GOOD 0x02
-#define BUSY 0x04
-#define INTERMEDIATE_GOOD 0x08
-#define INTERMEDIATE_C_GOOD 0x0a
-#define RESERVATION_CONFLICT 0x0c
-#define COMMAND_TERMINATED 0x11
-#define QUEUE_FULL 0x14
-#define ACA_ACTIVE 0x18
-#define TASK_ABORTED 0x20
-
-#define STATUS_MASK 0xfe
-
+#define STATUS_MASK 0xfe
/*
* SENSE KEYS
*/
@@ -345,4 +327,16 @@
ZBC_ZONE_COND_OFFLINE = 0xf,
};
+/* Version descriptor values for INQUIRY */
+enum scsi_version_descriptor {
+ SCSI_VERSION_DESCRIPTOR_FCP4 = 0x0a40,
+ SCSI_VERSION_DESCRIPTOR_ISCSI = 0x0960,
+ SCSI_VERSION_DESCRIPTOR_SAM5 = 0x00a0,
+ SCSI_VERSION_DESCRIPTOR_SAS3 = 0x0c60,
+ SCSI_VERSION_DESCRIPTOR_SBC3 = 0x04c0,
+ SCSI_VERSION_DESCRIPTOR_SBP3 = 0x0980,
+ SCSI_VERSION_DESCRIPTOR_SPC4 = 0x0460,
+ SCSI_VERSION_DESCRIPTOR_SRP = 0x0940
+};
+
#endif /* _SCSI_PROTO_H_ */
diff --git a/modified/scsi/scsi_status.h b/modified/scsi/scsi_status.h
new file mode 100644
index 0000000..d916e31
--- /dev/null
+++ b/modified/scsi/scsi_status.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _SCSI_SCSI_STATUS_H
+#define _SCSI_SCSI_STATUS_H
+
+#include <linux/types.h>
+#include <scsi/scsi_proto.h>
+
+#ifdef __KERNEL__
+/* Message codes. */
+enum scsi_msg_byte {
+ COMMAND_COMPLETE = 0x00,
+ EXTENDED_MESSAGE = 0x01,
+ SAVE_POINTERS = 0x02,
+ RESTORE_POINTERS = 0x03,
+ DISCONNECT = 0x04,
+ INITIATOR_ERROR = 0x05,
+ ABORT_TASK_SET = 0x06,
+ MESSAGE_REJECT = 0x07,
+ NOP = 0x08,
+ MSG_PARITY_ERROR = 0x09,
+ LINKED_CMD_COMPLETE = 0x0a,
+ LINKED_FLG_CMD_COMPLETE = 0x0b,
+ TARGET_RESET = 0x0c,
+ ABORT_TASK = 0x0d,
+ CLEAR_TASK_SET = 0x0e,
+ INITIATE_RECOVERY = 0x0f, /* SCSI-II only */
+ RELEASE_RECOVERY = 0x10, /* SCSI-II only */
+ TERMINATE_IO_PROC = 0x11, /* SCSI-II only */
+ CLEAR_ACA = 0x16,
+ LOGICAL_UNIT_RESET = 0x17,
+ SIMPLE_QUEUE_TAG = 0x20,
+ HEAD_OF_QUEUE_TAG = 0x21,
+ ORDERED_QUEUE_TAG = 0x22,
+ IGNORE_WIDE_RESIDUE = 0x23,
+ ACA = 0x24,
+ QAS_REQUEST = 0x55,
+
+ /* Old SCSI2 names, don't use in new code */
+ BUS_DEVICE_RESET = TARGET_RESET,
+ ABORT = ABORT_TASK_SET,
+};
+
+/* Host byte codes. */
+enum scsi_host_status {
+ DID_OK = 0x00, /* NO error */
+ DID_NO_CONNECT = 0x01, /* Couldn't connect before timeout period */
+ DID_BUS_BUSY = 0x02, /* BUS stayed busy through time out period */
+ DID_TIME_OUT = 0x03, /* TIMED OUT for other reason */
+ DID_BAD_TARGET = 0x04, /* BAD target. */
+ DID_ABORT = 0x05, /* Told to abort for some other reason */
+ DID_PARITY = 0x06, /* Parity error */
+ DID_ERROR = 0x07, /* Internal error */
+ DID_RESET = 0x08, /* Reset by somebody. */
+ DID_BAD_INTR = 0x09, /* Got an interrupt we weren't expecting. */
+ DID_PASSTHROUGH = 0x0a, /* Force command past mid-layer */
+ DID_SOFT_ERROR = 0x0b, /* The low level driver just wish a retry */
+ DID_IMM_RETRY = 0x0c, /* Retry without decrementing retry count */
+ DID_REQUEUE = 0x0d, /* Requeue command (no immediate retry) also
+ * without decrementing the retry count */
+ DID_TRANSPORT_DISRUPTED = 0x0e, /* Transport error disrupted execution
+ * and the driver blocked the port to
+ * recover the link. Transport class will
+ * retry or fail IO */
+ DID_TRANSPORT_FAILFAST = 0x0f, /* Transport class fastfailed the io */
+ DID_TARGET_FAILURE = 0x10, /* Permanent target failure, do not retry on
+ * other paths */
+ DID_NEXUS_FAILURE = 0x11, /* Permanent nexus failure, retry on other
+ * paths might yield different results */
+ DID_ALLOC_FAILURE = 0x12, /* Space allocation on the device failed */
+ DID_MEDIUM_ERROR = 0x13, /* Medium error */
+ DID_TRANSPORT_MARGINAL = 0x14, /* Transport marginal errors */
+};
+#endif /* __KERNEL__ */
+
+#endif /* _SCSI_SCSI_STATUS_H */
diff --git a/original/scsi/scsi.h b/original/scsi/scsi.h
index e75cca2..3e46859 100644
--- a/original/scsi/scsi.h
+++ b/original/scsi/scsi.h
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <scsi/scsi_common.h>
#include <scsi/scsi_proto.h>
+#include <scsi/scsi_status.h>
struct scsi_cmnd;
@@ -30,32 +31,6 @@
*/
#define SCAN_WILD_CARD ~0
-/** scsi_status_is_good - check the status return.
- *
- * @status: the status passed up from the driver (including host and
- * driver components)
- *
- * This returns true for known good conditions that may be treated as
- * command completed normally
- */
-static inline int scsi_status_is_good(int status)
-{
- /*
- * FIXME: bit0 is listed as reserved in SCSI-2, but is
- * significant in SCSI-3. For now, we follow the SCSI-2
- * behaviour and ignore reserved bits.
- */
- status &= 0xfe;
- return ((status == SAM_STAT_GOOD) ||
- (status == SAM_STAT_CONDITION_MET) ||
- /* Next two "intermediate" statuses are obsolete in SAM-4 */
- (status == SAM_STAT_INTERMEDIATE) ||
- (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
- /* FIXME: this is obsolete in SAM-3 */
- (status == SAM_STAT_COMMAND_TERMINATED));
-}
-
-
/*
* standard mode-select header prepended to all mode-select commands
*/
@@ -88,108 +63,46 @@
return (lun & 0xff00) == SCSI_W_LUN_BASE;
}
+/**
+ * scsi_status_is_check_condition - check the status return.
+ *
+ * @status: the status passed up from the driver (including host and
+ * driver components)
+ *
+ * This returns true if the status code is SAM_STAT_CHECK_CONDITION.
+ */
+static inline int scsi_status_is_check_condition(int status)
+{
+ if (status < 0)
+ return false;
+ status &= 0xfe;
+ return status == SAM_STAT_CHECK_CONDITION;
+}
/*
- * MESSAGE CODES
+ * Extended message codes.
*/
-
-#define COMMAND_COMPLETE 0x00
-#define EXTENDED_MESSAGE 0x01
#define EXTENDED_MODIFY_DATA_POINTER 0x00
#define EXTENDED_SDTR 0x01
#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
#define EXTENDED_WDTR 0x03
#define EXTENDED_PPR 0x04
#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05
-#define SAVE_POINTERS 0x02
-#define RESTORE_POINTERS 0x03
-#define DISCONNECT 0x04
-#define INITIATOR_ERROR 0x05
-#define ABORT_TASK_SET 0x06
-#define MESSAGE_REJECT 0x07
-#define NOP 0x08
-#define MSG_PARITY_ERROR 0x09
-#define LINKED_CMD_COMPLETE 0x0a
-#define LINKED_FLG_CMD_COMPLETE 0x0b
-#define TARGET_RESET 0x0c
-#define ABORT_TASK 0x0d
-#define CLEAR_TASK_SET 0x0e
-#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
-#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
-#define TERMINATE_IO_PROC 0x11 /* SCSI-II only */
-#define CLEAR_ACA 0x16
-#define LOGICAL_UNIT_RESET 0x17
-#define SIMPLE_QUEUE_TAG 0x20
-#define HEAD_OF_QUEUE_TAG 0x21
-#define ORDERED_QUEUE_TAG 0x22
-#define IGNORE_WIDE_RESIDUE 0x23
-#define ACA 0x24
-#define QAS_REQUEST 0x55
-
-/* Old SCSI2 names, don't use in new code */
-#define BUS_DEVICE_RESET TARGET_RESET
-#define ABORT ABORT_TASK_SET
-
-/*
- * Host byte codes
- */
-
-#define DID_OK 0x00 /* NO error */
-#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */
-#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */
-#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */
-#define DID_BAD_TARGET 0x04 /* BAD target. */
-#define DID_ABORT 0x05 /* Told to abort for some other reason */
-#define DID_PARITY 0x06 /* Parity error */
-#define DID_ERROR 0x07 /* Internal error */
-#define DID_RESET 0x08 /* Reset by somebody. */
-#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */
-#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */
-#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */
-#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */
-#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also
- * without decrementing the retry count */
-#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
- * and the driver blocked the port to
- * recover the link. Transport class will
- * retry or fail IO */
-#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */
-#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on
- * other paths */
-#define DID_NEXUS_FAILURE 0x11 /* Permanent nexus failure, retry on other
- * paths might yield different results */
-#define DID_ALLOC_FAILURE 0x12 /* Space allocation on the device failed */
-#define DID_MEDIUM_ERROR 0x13 /* Medium error */
-#define DID_TRANSPORT_MARGINAL 0x14 /* Transport marginal errors */
-#define DRIVER_OK 0x00 /* Driver status */
-
-/*
- * These indicate the error that occurred, and what is available.
- */
-
-#define DRIVER_BUSY 0x01
-#define DRIVER_SOFT 0x02
-#define DRIVER_MEDIA 0x03
-#define DRIVER_ERROR 0x04
-
-#define DRIVER_INVALID 0x05
-#define DRIVER_TIMEOUT 0x06
-#define DRIVER_HARD 0x07
-#define DRIVER_SENSE 0x08
/*
* Internal return values.
*/
-
-#define NEEDS_RETRY 0x2001
-#define SUCCESS 0x2002
-#define FAILED 0x2003
-#define QUEUED 0x2004
-#define SOFT_ERROR 0x2005
-#define ADD_TO_MLQUEUE 0x2006
-#define TIMEOUT_ERROR 0x2007
-#define SCSI_RETURN_NOT_HANDLED 0x2008
-#define FAST_IO_FAIL 0x2009
+enum scsi_disposition {
+ NEEDS_RETRY = 0x2001,
+ SUCCESS = 0x2002,
+ FAILED = 0x2003,
+ QUEUED = 0x2004,
+ SOFT_ERROR = 0x2005,
+ ADD_TO_MLQUEUE = 0x2006,
+ TIMEOUT_ERROR = 0x2007,
+ SCSI_RETURN_NOT_HANDLED = 0x2008,
+ FAST_IO_FAIL = 0x2009,
+};
/*
* Midlevel queue return values.
@@ -205,14 +118,10 @@
* These are set by:
*
* status byte = set from target device
- * msg_byte = return status from host adapter itself.
+ * msg_byte (unused)
* host_byte = set by low-level driver to indicate status.
- * driver_byte = set by mid-level.
*/
-#define status_byte(result) (((result) >> 1) & 0x7f)
-#define msg_byte(result) (((result) >> 8) & 0xff)
#define host_byte(result) (((result) >> 16) & 0xff)
-#define driver_byte(result) (((result) >> 24) & 0xff)
#define sense_class(sense) (((sense) >> 4) & 0x7)
#define sense_error(sense) ((sense) & 0xf)
@@ -276,4 +185,35 @@
/* Used to obtain the PCI location of a device */
#define SCSI_IOCTL_GET_PCI 0x5387
+/** scsi_status_is_good - check the status return.
+ *
+ * @status: the status passed up from the driver (including host and
+ * driver components)
+ *
+ * This returns true for known good conditions that may be treated as
+ * command completed normally
+ */
+static inline bool scsi_status_is_good(int status)
+{
+ if (status < 0)
+ return false;
+
+ if (host_byte(status) == DID_NO_CONNECT)
+ return false;
+
+ /*
+ * FIXME: bit0 is listed as reserved in SCSI-2, but is
+ * significant in SCSI-3. For now, we follow the SCSI-2
+ * behaviour and ignore reserved bits.
+ */
+ status &= 0xfe;
+ return ((status == SAM_STAT_GOOD) ||
+ (status == SAM_STAT_CONDITION_MET) ||
+ /* Next two "intermediate" statuses are obsolete in SAM-4 */
+ (status == SAM_STAT_INTERMEDIATE) ||
+ (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
+ /* FIXME: this is obsolete in SAM-3 */
+ (status == SAM_STAT_COMMAND_TERMINATED));
+}
+
#endif /* _SCSI_SCSI_H */
diff --git a/original/scsi/scsi_ioctl.h b/original/scsi/scsi_ioctl.h
index b465799..beac64e 100644
--- a/original/scsi/scsi_ioctl.h
+++ b/original/scsi/scsi_ioctl.h
@@ -18,7 +18,9 @@
#ifdef __KERNEL__
+struct gendisk;
struct scsi_device;
+struct sg_io_hdr;
/*
* Structures used for scsi_ioctl et al.
@@ -43,8 +45,11 @@
int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev,
int cmd, bool ndelay);
-extern int scsi_ioctl(struct scsi_device *, int, void __user *);
-extern int scsi_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg);
+int scsi_ioctl(struct scsi_device *sdev, fmode_t mode, int cmd,
+ void __user *arg);
+int get_sg_io_hdr(struct sg_io_hdr *hdr, const void __user *argp);
+int put_sg_io_hdr(const struct sg_io_hdr *hdr, void __user *argp);
+bool scsi_cmd_allowed(unsigned char *cmd, fmode_t mode);
#endif /* __KERNEL__ */
#endif /* _SCSI_IOCTL_H */
diff --git a/original/scsi/scsi_proto.h b/original/scsi/scsi_proto.h
index c368601..f017843 100644
--- a/original/scsi/scsi_proto.h
+++ b/original/scsi/scsi_proto.h
@@ -190,39 +190,21 @@
* SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
* T10/1561-D Revision 4 Draft dated 7th November 2002.
*/
-#define SAM_STAT_GOOD 0x00
-#define SAM_STAT_CHECK_CONDITION 0x02
-#define SAM_STAT_CONDITION_MET 0x04
-#define SAM_STAT_BUSY 0x08
-#define SAM_STAT_INTERMEDIATE 0x10
-#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
-#define SAM_STAT_RESERVATION_CONFLICT 0x18
-#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
-#define SAM_STAT_TASK_SET_FULL 0x28
-#define SAM_STAT_ACA_ACTIVE 0x30
-#define SAM_STAT_TASK_ABORTED 0x40
+enum sam_status {
+ SAM_STAT_GOOD = 0x00,
+ SAM_STAT_CHECK_CONDITION = 0x02,
+ SAM_STAT_CONDITION_MET = 0x04,
+ SAM_STAT_BUSY = 0x08,
+ SAM_STAT_INTERMEDIATE = 0x10,
+ SAM_STAT_INTERMEDIATE_CONDITION_MET = 0x14,
+ SAM_STAT_RESERVATION_CONFLICT = 0x18,
+ SAM_STAT_COMMAND_TERMINATED = 0x22, /* obsolete in SAM-3 */
+ SAM_STAT_TASK_SET_FULL = 0x28,
+ SAM_STAT_ACA_ACTIVE = 0x30,
+ SAM_STAT_TASK_ABORTED = 0x40,
+};
-/*
- * Status codes. These are deprecated as they are shifted 1 bit right
- * from those found in the SCSI standards. This causes confusion for
- * applications that are ported to several OSes. Prefer SAM Status codes
- * above.
- */
-
-#define GOOD 0x00
-#define CHECK_CONDITION 0x01
-#define CONDITION_GOOD 0x02
-#define BUSY 0x04
-#define INTERMEDIATE_GOOD 0x08
-#define INTERMEDIATE_C_GOOD 0x0a
-#define RESERVATION_CONFLICT 0x0c
-#define COMMAND_TERMINATED 0x11
-#define QUEUE_FULL 0x14
-#define ACA_ACTIVE 0x18
-#define TASK_ABORTED 0x20
-
-#define STATUS_MASK 0xfe
-
+#define STATUS_MASK 0xfe
/*
* SENSE KEYS
*/
@@ -341,4 +323,16 @@
ZBC_ZONE_COND_OFFLINE = 0xf,
};
+/* Version descriptor values for INQUIRY */
+enum scsi_version_descriptor {
+ SCSI_VERSION_DESCRIPTOR_FCP4 = 0x0a40,
+ SCSI_VERSION_DESCRIPTOR_ISCSI = 0x0960,
+ SCSI_VERSION_DESCRIPTOR_SAM5 = 0x00a0,
+ SCSI_VERSION_DESCRIPTOR_SAS3 = 0x0c60,
+ SCSI_VERSION_DESCRIPTOR_SBC3 = 0x04c0,
+ SCSI_VERSION_DESCRIPTOR_SBP3 = 0x0980,
+ SCSI_VERSION_DESCRIPTOR_SPC4 = 0x0460,
+ SCSI_VERSION_DESCRIPTOR_SRP = 0x0940
+};
+
#endif /* _SCSI_PROTO_H_ */
diff --git a/original/scsi/scsi_status.h b/original/scsi/scsi_status.h
new file mode 100644
index 0000000..31d30ce
--- /dev/null
+++ b/original/scsi/scsi_status.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _SCSI_SCSI_STATUS_H
+#define _SCSI_SCSI_STATUS_H
+
+#include <linux/types.h>
+#include <scsi/scsi_proto.h>
+
+/* Message codes. */
+enum scsi_msg_byte {
+ COMMAND_COMPLETE = 0x00,
+ EXTENDED_MESSAGE = 0x01,
+ SAVE_POINTERS = 0x02,
+ RESTORE_POINTERS = 0x03,
+ DISCONNECT = 0x04,
+ INITIATOR_ERROR = 0x05,
+ ABORT_TASK_SET = 0x06,
+ MESSAGE_REJECT = 0x07,
+ NOP = 0x08,
+ MSG_PARITY_ERROR = 0x09,
+ LINKED_CMD_COMPLETE = 0x0a,
+ LINKED_FLG_CMD_COMPLETE = 0x0b,
+ TARGET_RESET = 0x0c,
+ ABORT_TASK = 0x0d,
+ CLEAR_TASK_SET = 0x0e,
+ INITIATE_RECOVERY = 0x0f, /* SCSI-II only */
+ RELEASE_RECOVERY = 0x10, /* SCSI-II only */
+ TERMINATE_IO_PROC = 0x11, /* SCSI-II only */
+ CLEAR_ACA = 0x16,
+ LOGICAL_UNIT_RESET = 0x17,
+ SIMPLE_QUEUE_TAG = 0x20,
+ HEAD_OF_QUEUE_TAG = 0x21,
+ ORDERED_QUEUE_TAG = 0x22,
+ IGNORE_WIDE_RESIDUE = 0x23,
+ ACA = 0x24,
+ QAS_REQUEST = 0x55,
+
+ /* Old SCSI2 names, don't use in new code */
+ BUS_DEVICE_RESET = TARGET_RESET,
+ ABORT = ABORT_TASK_SET,
+};
+
+/* Host byte codes. */
+enum scsi_host_status {
+ DID_OK = 0x00, /* NO error */
+ DID_NO_CONNECT = 0x01, /* Couldn't connect before timeout period */
+ DID_BUS_BUSY = 0x02, /* BUS stayed busy through time out period */
+ DID_TIME_OUT = 0x03, /* TIMED OUT for other reason */
+ DID_BAD_TARGET = 0x04, /* BAD target. */
+ DID_ABORT = 0x05, /* Told to abort for some other reason */
+ DID_PARITY = 0x06, /* Parity error */
+ DID_ERROR = 0x07, /* Internal error */
+ DID_RESET = 0x08, /* Reset by somebody. */
+ DID_BAD_INTR = 0x09, /* Got an interrupt we weren't expecting. */
+ DID_PASSTHROUGH = 0x0a, /* Force command past mid-layer */
+ DID_SOFT_ERROR = 0x0b, /* The low level driver just wish a retry */
+ DID_IMM_RETRY = 0x0c, /* Retry without decrementing retry count */
+ DID_REQUEUE = 0x0d, /* Requeue command (no immediate retry) also
+ * without decrementing the retry count */
+ DID_TRANSPORT_DISRUPTED = 0x0e, /* Transport error disrupted execution
+ * and the driver blocked the port to
+ * recover the link. Transport class will
+ * retry or fail IO */
+ DID_TRANSPORT_FAILFAST = 0x0f, /* Transport class fastfailed the io */
+ DID_TARGET_FAILURE = 0x10, /* Permanent target failure, do not retry on
+ * other paths */
+ DID_NEXUS_FAILURE = 0x11, /* Permanent nexus failure, retry on other
+ * paths might yield different results */
+ DID_ALLOC_FAILURE = 0x12, /* Space allocation on the device failed */
+ DID_MEDIUM_ERROR = 0x13, /* Medium error */
+ DID_TRANSPORT_MARGINAL = 0x14, /* Transport marginal errors */
+};
+
+#endif /* _SCSI_SCSI_STATUS_H */
diff --git a/original/scsi/sg.h b/original/scsi/sg.h
index 7327e12..068e35d 100644
--- a/original/scsi/sg.h
+++ b/original/scsi/sg.h
@@ -29,10 +29,6 @@
* For utility and test programs see: http://sg.danny.cz/sg/sg3_utils.html
*/
-#ifdef __KERNEL__
-extern int sg_big_buff; /* for sysctl */
-#endif
-
typedef struct sg_iovec /* same structure as used by readv() Linux system */
{ /* call. It defines one scatter-gather element. */
@@ -131,6 +127,39 @@
#define SG_INFO_DIRECT_IO 0x2 /* direct IO requested and performed */
#define SG_INFO_MIXED_IO 0x4 /* part direct, part indirect IO */
+/*
+ * Obsolete DRIVER_SENSE driver byte
+ *
+ * Originally the SCSI midlayer would set the DRIVER_SENSE driver byte when
+ * a sense code was generated and a sense buffer was allocated.
+ * However, as nowadays every scsi command has a sense code allocated this
+ * distinction became moot as one could check the sense buffer directly.
+ * Consequently this byte is not set anymore from the midlayer, but SG will
+ * keep setting this byte to be compatible with previous releases.
+ */
+#define DRIVER_SENSE 0x08
+/* Obsolete driver_byte() declaration */
+#define driver_byte(result) (((result) >> 24) & 0xff)
+
+/*
+ * Original linux SCSI Status codes. They are shifted 1 bit right
+ * from those found in the SCSI standards.
+ */
+
+#define GOOD 0x00
+#define CHECK_CONDITION 0x01
+#define CONDITION_GOOD 0x02
+#define BUSY 0x04
+#define INTERMEDIATE_GOOD 0x08
+#define INTERMEDIATE_C_GOOD 0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define COMMAND_TERMINATED 0x11
+#define QUEUE_FULL 0x14
+#define ACA_ACTIVE 0x18
+#define TASK_ABORTED 0x20
+
+/* Obsolete status_byte() declaration */
+#define status_byte(result) (((result) >> 1) & 0x7f)
typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */
int host_no; /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */
@@ -145,7 +174,7 @@
typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */
char req_state; /* 0 -> not used, 1 -> written, 2 -> ready to read */
- char orphan; /* 0 -> normal request, 1 -> from interruped SG_IO */
+ char orphan; /* 0 -> normal request, 1 -> from interrupted SG_IO */
char sg_io_owned; /* 0 -> complete with read(), 1 -> owned by SG_IO */
char problem; /* 0 -> no problem detected, 1 -> error to report */
int pack_id; /* pack_id associated with request */
diff --git a/original/uapi/asm-arm/asm/hwcap.h b/original/uapi/asm-arm/asm/hwcap.h
index b5971df..990199d 100644
--- a/original/uapi/asm-arm/asm/hwcap.h
+++ b/original/uapi/asm-arm/asm/hwcap.h
@@ -15,7 +15,7 @@
#define HWCAP_EDSP (1 << 7)
#define HWCAP_JAVA (1 << 8)
#define HWCAP_IWMMXT (1 << 9)
-#define HWCAP_CRUNCH (1 << 10)
+#define HWCAP_CRUNCH (1 << 10) /* Obsolete */
#define HWCAP_THUMBEE (1 << 11)
#define HWCAP_NEON (1 << 12)
#define HWCAP_VFPv3 (1 << 13)
diff --git a/original/uapi/asm-arm/asm/ptrace.h b/original/uapi/asm-arm/asm/ptrace.h
index e61c65b..8896c23 100644
--- a/original/uapi/asm-arm/asm/ptrace.h
+++ b/original/uapi/asm-arm/asm/ptrace.h
@@ -26,8 +26,8 @@
#define PTRACE_GET_THREAD_AREA 22
#define PTRACE_SET_SYSCALL 23
/* PTRACE_SYSCALL is 24 */
-#define PTRACE_GETCRUNCHREGS 25
-#define PTRACE_SETCRUNCHREGS 26
+#define PTRACE_GETCRUNCHREGS 25 /* obsolete */
+#define PTRACE_SETCRUNCHREGS 26 /* obsolete */
#define PTRACE_GETVFPREGS 27
#define PTRACE_SETVFPREGS 28
#define PTRACE_GETHBPREGS 29
diff --git a/original/uapi/asm-arm/asm/setup.h b/original/uapi/asm-arm/asm/setup.h
index 345bf0a..25ceda6 100644
--- a/original/uapi/asm-arm/asm/setup.h
+++ b/original/uapi/asm-arm/asm/setup.h
@@ -17,7 +17,7 @@
#include <linux/types.h>
-#define COMMAND_LINE_SIZE 2048
+#define COMMAND_LINE_SIZE 1024
/* The list ends with an ATAG_NONE node. */
#define ATAG_NONE 0x00000000
diff --git a/original/uapi/asm-arm/asm/unistd-common.h b/original/uapi/asm-arm/asm/unistd-common.h
deleted file mode 100644
index e38b11c..0000000
--- a/original/uapi/asm-arm/asm/unistd-common.h
+++ /dev/null
@@ -1,401 +0,0 @@
-#ifndef _UAPI_ASM_ARM_UNISTD_COMMON_H
-#define _UAPI_ASM_ARM_UNISTD_COMMON_H 1
-
-#define __NR_restart_syscall (__NR_SYSCALL_BASE + 0)
-#define __NR_exit (__NR_SYSCALL_BASE + 1)
-#define __NR_fork (__NR_SYSCALL_BASE + 2)
-#define __NR_read (__NR_SYSCALL_BASE + 3)
-#define __NR_write (__NR_SYSCALL_BASE + 4)
-#define __NR_open (__NR_SYSCALL_BASE + 5)
-#define __NR_close (__NR_SYSCALL_BASE + 6)
-#define __NR_creat (__NR_SYSCALL_BASE + 8)
-#define __NR_link (__NR_SYSCALL_BASE + 9)
-#define __NR_unlink (__NR_SYSCALL_BASE + 10)
-#define __NR_execve (__NR_SYSCALL_BASE + 11)
-#define __NR_chdir (__NR_SYSCALL_BASE + 12)
-#define __NR_mknod (__NR_SYSCALL_BASE + 14)
-#define __NR_chmod (__NR_SYSCALL_BASE + 15)
-#define __NR_lchown (__NR_SYSCALL_BASE + 16)
-#define __NR_lseek (__NR_SYSCALL_BASE + 19)
-#define __NR_getpid (__NR_SYSCALL_BASE + 20)
-#define __NR_mount (__NR_SYSCALL_BASE + 21)
-#define __NR_setuid (__NR_SYSCALL_BASE + 23)
-#define __NR_getuid (__NR_SYSCALL_BASE + 24)
-#define __NR_ptrace (__NR_SYSCALL_BASE + 26)
-#define __NR_pause (__NR_SYSCALL_BASE + 29)
-#define __NR_access (__NR_SYSCALL_BASE + 33)
-#define __NR_nice (__NR_SYSCALL_BASE + 34)
-#define __NR_sync (__NR_SYSCALL_BASE + 36)
-#define __NR_kill (__NR_SYSCALL_BASE + 37)
-#define __NR_rename (__NR_SYSCALL_BASE + 38)
-#define __NR_mkdir (__NR_SYSCALL_BASE + 39)
-#define __NR_rmdir (__NR_SYSCALL_BASE + 40)
-#define __NR_dup (__NR_SYSCALL_BASE + 41)
-#define __NR_pipe (__NR_SYSCALL_BASE + 42)
-#define __NR_times (__NR_SYSCALL_BASE + 43)
-#define __NR_brk (__NR_SYSCALL_BASE + 45)
-#define __NR_setgid (__NR_SYSCALL_BASE + 46)
-#define __NR_getgid (__NR_SYSCALL_BASE + 47)
-#define __NR_geteuid (__NR_SYSCALL_BASE + 49)
-#define __NR_getegid (__NR_SYSCALL_BASE + 50)
-#define __NR_acct (__NR_SYSCALL_BASE + 51)
-#define __NR_umount2 (__NR_SYSCALL_BASE + 52)
-#define __NR_ioctl (__NR_SYSCALL_BASE + 54)
-#define __NR_fcntl (__NR_SYSCALL_BASE + 55)
-#define __NR_setpgid (__NR_SYSCALL_BASE + 57)
-#define __NR_umask (__NR_SYSCALL_BASE + 60)
-#define __NR_chroot (__NR_SYSCALL_BASE + 61)
-#define __NR_ustat (__NR_SYSCALL_BASE + 62)
-#define __NR_dup2 (__NR_SYSCALL_BASE + 63)
-#define __NR_getppid (__NR_SYSCALL_BASE + 64)
-#define __NR_getpgrp (__NR_SYSCALL_BASE + 65)
-#define __NR_setsid (__NR_SYSCALL_BASE + 66)
-#define __NR_sigaction (__NR_SYSCALL_BASE + 67)
-#define __NR_setreuid (__NR_SYSCALL_BASE + 70)
-#define __NR_setregid (__NR_SYSCALL_BASE + 71)
-#define __NR_sigsuspend (__NR_SYSCALL_BASE + 72)
-#define __NR_sigpending (__NR_SYSCALL_BASE + 73)
-#define __NR_sethostname (__NR_SYSCALL_BASE + 74)
-#define __NR_setrlimit (__NR_SYSCALL_BASE + 75)
-#define __NR_getrusage (__NR_SYSCALL_BASE + 77)
-#define __NR_gettimeofday (__NR_SYSCALL_BASE + 78)
-#define __NR_settimeofday (__NR_SYSCALL_BASE + 79)
-#define __NR_getgroups (__NR_SYSCALL_BASE + 80)
-#define __NR_setgroups (__NR_SYSCALL_BASE + 81)
-#define __NR_symlink (__NR_SYSCALL_BASE + 83)
-#define __NR_readlink (__NR_SYSCALL_BASE + 85)
-#define __NR_uselib (__NR_SYSCALL_BASE + 86)
-#define __NR_swapon (__NR_SYSCALL_BASE + 87)
-#define __NR_reboot (__NR_SYSCALL_BASE + 88)
-#define __NR_munmap (__NR_SYSCALL_BASE + 91)
-#define __NR_truncate (__NR_SYSCALL_BASE + 92)
-#define __NR_ftruncate (__NR_SYSCALL_BASE + 93)
-#define __NR_fchmod (__NR_SYSCALL_BASE + 94)
-#define __NR_fchown (__NR_SYSCALL_BASE + 95)
-#define __NR_getpriority (__NR_SYSCALL_BASE + 96)
-#define __NR_setpriority (__NR_SYSCALL_BASE + 97)
-#define __NR_statfs (__NR_SYSCALL_BASE + 99)
-#define __NR_fstatfs (__NR_SYSCALL_BASE + 100)
-#define __NR_syslog (__NR_SYSCALL_BASE + 103)
-#define __NR_setitimer (__NR_SYSCALL_BASE + 104)
-#define __NR_getitimer (__NR_SYSCALL_BASE + 105)
-#define __NR_stat (__NR_SYSCALL_BASE + 106)
-#define __NR_lstat (__NR_SYSCALL_BASE + 107)
-#define __NR_fstat (__NR_SYSCALL_BASE + 108)
-#define __NR_vhangup (__NR_SYSCALL_BASE + 111)
-#define __NR_wait4 (__NR_SYSCALL_BASE + 114)
-#define __NR_swapoff (__NR_SYSCALL_BASE + 115)
-#define __NR_sysinfo (__NR_SYSCALL_BASE + 116)
-#define __NR_fsync (__NR_SYSCALL_BASE + 118)
-#define __NR_sigreturn (__NR_SYSCALL_BASE + 119)
-#define __NR_clone (__NR_SYSCALL_BASE + 120)
-#define __NR_setdomainname (__NR_SYSCALL_BASE + 121)
-#define __NR_uname (__NR_SYSCALL_BASE + 122)
-#define __NR_adjtimex (__NR_SYSCALL_BASE + 124)
-#define __NR_mprotect (__NR_SYSCALL_BASE + 125)
-#define __NR_sigprocmask (__NR_SYSCALL_BASE + 126)
-#define __NR_init_module (__NR_SYSCALL_BASE + 128)
-#define __NR_delete_module (__NR_SYSCALL_BASE + 129)
-#define __NR_quotactl (__NR_SYSCALL_BASE + 131)
-#define __NR_getpgid (__NR_SYSCALL_BASE + 132)
-#define __NR_fchdir (__NR_SYSCALL_BASE + 133)
-#define __NR_bdflush (__NR_SYSCALL_BASE + 134)
-#define __NR_sysfs (__NR_SYSCALL_BASE + 135)
-#define __NR_personality (__NR_SYSCALL_BASE + 136)
-#define __NR_setfsuid (__NR_SYSCALL_BASE + 138)
-#define __NR_setfsgid (__NR_SYSCALL_BASE + 139)
-#define __NR__llseek (__NR_SYSCALL_BASE + 140)
-#define __NR_getdents (__NR_SYSCALL_BASE + 141)
-#define __NR__newselect (__NR_SYSCALL_BASE + 142)
-#define __NR_flock (__NR_SYSCALL_BASE + 143)
-#define __NR_msync (__NR_SYSCALL_BASE + 144)
-#define __NR_readv (__NR_SYSCALL_BASE + 145)
-#define __NR_writev (__NR_SYSCALL_BASE + 146)
-#define __NR_getsid (__NR_SYSCALL_BASE + 147)
-#define __NR_fdatasync (__NR_SYSCALL_BASE + 148)
-#define __NR__sysctl (__NR_SYSCALL_BASE + 149)
-#define __NR_mlock (__NR_SYSCALL_BASE + 150)
-#define __NR_munlock (__NR_SYSCALL_BASE + 151)
-#define __NR_mlockall (__NR_SYSCALL_BASE + 152)
-#define __NR_munlockall (__NR_SYSCALL_BASE + 153)
-#define __NR_sched_setparam (__NR_SYSCALL_BASE + 154)
-#define __NR_sched_getparam (__NR_SYSCALL_BASE + 155)
-#define __NR_sched_setscheduler (__NR_SYSCALL_BASE + 156)
-#define __NR_sched_getscheduler (__NR_SYSCALL_BASE + 157)
-#define __NR_sched_yield (__NR_SYSCALL_BASE + 158)
-#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE + 159)
-#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE + 160)
-#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE + 161)
-#define __NR_nanosleep (__NR_SYSCALL_BASE + 162)
-#define __NR_mremap (__NR_SYSCALL_BASE + 163)
-#define __NR_setresuid (__NR_SYSCALL_BASE + 164)
-#define __NR_getresuid (__NR_SYSCALL_BASE + 165)
-#define __NR_poll (__NR_SYSCALL_BASE + 168)
-#define __NR_nfsservctl (__NR_SYSCALL_BASE + 169)
-#define __NR_setresgid (__NR_SYSCALL_BASE + 170)
-#define __NR_getresgid (__NR_SYSCALL_BASE + 171)
-#define __NR_prctl (__NR_SYSCALL_BASE + 172)
-#define __NR_rt_sigreturn (__NR_SYSCALL_BASE + 173)
-#define __NR_rt_sigaction (__NR_SYSCALL_BASE + 174)
-#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE + 175)
-#define __NR_rt_sigpending (__NR_SYSCALL_BASE + 176)
-#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE + 177)
-#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE + 178)
-#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE + 179)
-#define __NR_pread64 (__NR_SYSCALL_BASE + 180)
-#define __NR_pwrite64 (__NR_SYSCALL_BASE + 181)
-#define __NR_chown (__NR_SYSCALL_BASE + 182)
-#define __NR_getcwd (__NR_SYSCALL_BASE + 183)
-#define __NR_capget (__NR_SYSCALL_BASE + 184)
-#define __NR_capset (__NR_SYSCALL_BASE + 185)
-#define __NR_sigaltstack (__NR_SYSCALL_BASE + 186)
-#define __NR_sendfile (__NR_SYSCALL_BASE + 187)
-#define __NR_vfork (__NR_SYSCALL_BASE + 190)
-#define __NR_ugetrlimit (__NR_SYSCALL_BASE + 191)
-#define __NR_mmap2 (__NR_SYSCALL_BASE + 192)
-#define __NR_truncate64 (__NR_SYSCALL_BASE + 193)
-#define __NR_ftruncate64 (__NR_SYSCALL_BASE + 194)
-#define __NR_stat64 (__NR_SYSCALL_BASE + 195)
-#define __NR_lstat64 (__NR_SYSCALL_BASE + 196)
-#define __NR_fstat64 (__NR_SYSCALL_BASE + 197)
-#define __NR_lchown32 (__NR_SYSCALL_BASE + 198)
-#define __NR_getuid32 (__NR_SYSCALL_BASE + 199)
-#define __NR_getgid32 (__NR_SYSCALL_BASE + 200)
-#define __NR_geteuid32 (__NR_SYSCALL_BASE + 201)
-#define __NR_getegid32 (__NR_SYSCALL_BASE + 202)
-#define __NR_setreuid32 (__NR_SYSCALL_BASE + 203)
-#define __NR_setregid32 (__NR_SYSCALL_BASE + 204)
-#define __NR_getgroups32 (__NR_SYSCALL_BASE + 205)
-#define __NR_setgroups32 (__NR_SYSCALL_BASE + 206)
-#define __NR_fchown32 (__NR_SYSCALL_BASE + 207)
-#define __NR_setresuid32 (__NR_SYSCALL_BASE + 208)
-#define __NR_getresuid32 (__NR_SYSCALL_BASE + 209)
-#define __NR_setresgid32 (__NR_SYSCALL_BASE + 210)
-#define __NR_getresgid32 (__NR_SYSCALL_BASE + 211)
-#define __NR_chown32 (__NR_SYSCALL_BASE + 212)
-#define __NR_setuid32 (__NR_SYSCALL_BASE + 213)
-#define __NR_setgid32 (__NR_SYSCALL_BASE + 214)
-#define __NR_setfsuid32 (__NR_SYSCALL_BASE + 215)
-#define __NR_setfsgid32 (__NR_SYSCALL_BASE + 216)
-#define __NR_getdents64 (__NR_SYSCALL_BASE + 217)
-#define __NR_pivot_root (__NR_SYSCALL_BASE + 218)
-#define __NR_mincore (__NR_SYSCALL_BASE + 219)
-#define __NR_madvise (__NR_SYSCALL_BASE + 220)
-#define __NR_fcntl64 (__NR_SYSCALL_BASE + 221)
-#define __NR_gettid (__NR_SYSCALL_BASE + 224)
-#define __NR_readahead (__NR_SYSCALL_BASE + 225)
-#define __NR_setxattr (__NR_SYSCALL_BASE + 226)
-#define __NR_lsetxattr (__NR_SYSCALL_BASE + 227)
-#define __NR_fsetxattr (__NR_SYSCALL_BASE + 228)
-#define __NR_getxattr (__NR_SYSCALL_BASE + 229)
-#define __NR_lgetxattr (__NR_SYSCALL_BASE + 230)
-#define __NR_fgetxattr (__NR_SYSCALL_BASE + 231)
-#define __NR_listxattr (__NR_SYSCALL_BASE + 232)
-#define __NR_llistxattr (__NR_SYSCALL_BASE + 233)
-#define __NR_flistxattr (__NR_SYSCALL_BASE + 234)
-#define __NR_removexattr (__NR_SYSCALL_BASE + 235)
-#define __NR_lremovexattr (__NR_SYSCALL_BASE + 236)
-#define __NR_fremovexattr (__NR_SYSCALL_BASE + 237)
-#define __NR_tkill (__NR_SYSCALL_BASE + 238)
-#define __NR_sendfile64 (__NR_SYSCALL_BASE + 239)
-#define __NR_futex (__NR_SYSCALL_BASE + 240)
-#define __NR_sched_setaffinity (__NR_SYSCALL_BASE + 241)
-#define __NR_sched_getaffinity (__NR_SYSCALL_BASE + 242)
-#define __NR_io_setup (__NR_SYSCALL_BASE + 243)
-#define __NR_io_destroy (__NR_SYSCALL_BASE + 244)
-#define __NR_io_getevents (__NR_SYSCALL_BASE + 245)
-#define __NR_io_submit (__NR_SYSCALL_BASE + 246)
-#define __NR_io_cancel (__NR_SYSCALL_BASE + 247)
-#define __NR_exit_group (__NR_SYSCALL_BASE + 248)
-#define __NR_lookup_dcookie (__NR_SYSCALL_BASE + 249)
-#define __NR_epoll_create (__NR_SYSCALL_BASE + 250)
-#define __NR_epoll_ctl (__NR_SYSCALL_BASE + 251)
-#define __NR_epoll_wait (__NR_SYSCALL_BASE + 252)
-#define __NR_remap_file_pages (__NR_SYSCALL_BASE + 253)
-#define __NR_set_tid_address (__NR_SYSCALL_BASE + 256)
-#define __NR_timer_create (__NR_SYSCALL_BASE + 257)
-#define __NR_timer_settime (__NR_SYSCALL_BASE + 258)
-#define __NR_timer_gettime (__NR_SYSCALL_BASE + 259)
-#define __NR_timer_getoverrun (__NR_SYSCALL_BASE + 260)
-#define __NR_timer_delete (__NR_SYSCALL_BASE + 261)
-#define __NR_clock_settime (__NR_SYSCALL_BASE + 262)
-#define __NR_clock_gettime (__NR_SYSCALL_BASE + 263)
-#define __NR_clock_getres (__NR_SYSCALL_BASE + 264)
-#define __NR_clock_nanosleep (__NR_SYSCALL_BASE + 265)
-#define __NR_statfs64 (__NR_SYSCALL_BASE + 266)
-#define __NR_fstatfs64 (__NR_SYSCALL_BASE + 267)
-#define __NR_tgkill (__NR_SYSCALL_BASE + 268)
-#define __NR_utimes (__NR_SYSCALL_BASE + 269)
-#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE + 270)
-#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE + 271)
-#define __NR_pciconfig_read (__NR_SYSCALL_BASE + 272)
-#define __NR_pciconfig_write (__NR_SYSCALL_BASE + 273)
-#define __NR_mq_open (__NR_SYSCALL_BASE + 274)
-#define __NR_mq_unlink (__NR_SYSCALL_BASE + 275)
-#define __NR_mq_timedsend (__NR_SYSCALL_BASE + 276)
-#define __NR_mq_timedreceive (__NR_SYSCALL_BASE + 277)
-#define __NR_mq_notify (__NR_SYSCALL_BASE + 278)
-#define __NR_mq_getsetattr (__NR_SYSCALL_BASE + 279)
-#define __NR_waitid (__NR_SYSCALL_BASE + 280)
-#define __NR_socket (__NR_SYSCALL_BASE + 281)
-#define __NR_bind (__NR_SYSCALL_BASE + 282)
-#define __NR_connect (__NR_SYSCALL_BASE + 283)
-#define __NR_listen (__NR_SYSCALL_BASE + 284)
-#define __NR_accept (__NR_SYSCALL_BASE + 285)
-#define __NR_getsockname (__NR_SYSCALL_BASE + 286)
-#define __NR_getpeername (__NR_SYSCALL_BASE + 287)
-#define __NR_socketpair (__NR_SYSCALL_BASE + 288)
-#define __NR_send (__NR_SYSCALL_BASE + 289)
-#define __NR_sendto (__NR_SYSCALL_BASE + 290)
-#define __NR_recv (__NR_SYSCALL_BASE + 291)
-#define __NR_recvfrom (__NR_SYSCALL_BASE + 292)
-#define __NR_shutdown (__NR_SYSCALL_BASE + 293)
-#define __NR_setsockopt (__NR_SYSCALL_BASE + 294)
-#define __NR_getsockopt (__NR_SYSCALL_BASE + 295)
-#define __NR_sendmsg (__NR_SYSCALL_BASE + 296)
-#define __NR_recvmsg (__NR_SYSCALL_BASE + 297)
-#define __NR_semop (__NR_SYSCALL_BASE + 298)
-#define __NR_semget (__NR_SYSCALL_BASE + 299)
-#define __NR_semctl (__NR_SYSCALL_BASE + 300)
-#define __NR_msgsnd (__NR_SYSCALL_BASE + 301)
-#define __NR_msgrcv (__NR_SYSCALL_BASE + 302)
-#define __NR_msgget (__NR_SYSCALL_BASE + 303)
-#define __NR_msgctl (__NR_SYSCALL_BASE + 304)
-#define __NR_shmat (__NR_SYSCALL_BASE + 305)
-#define __NR_shmdt (__NR_SYSCALL_BASE + 306)
-#define __NR_shmget (__NR_SYSCALL_BASE + 307)
-#define __NR_shmctl (__NR_SYSCALL_BASE + 308)
-#define __NR_add_key (__NR_SYSCALL_BASE + 309)
-#define __NR_request_key (__NR_SYSCALL_BASE + 310)
-#define __NR_keyctl (__NR_SYSCALL_BASE + 311)
-#define __NR_semtimedop (__NR_SYSCALL_BASE + 312)
-#define __NR_vserver (__NR_SYSCALL_BASE + 313)
-#define __NR_ioprio_set (__NR_SYSCALL_BASE + 314)
-#define __NR_ioprio_get (__NR_SYSCALL_BASE + 315)
-#define __NR_inotify_init (__NR_SYSCALL_BASE + 316)
-#define __NR_inotify_add_watch (__NR_SYSCALL_BASE + 317)
-#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE + 318)
-#define __NR_mbind (__NR_SYSCALL_BASE + 319)
-#define __NR_get_mempolicy (__NR_SYSCALL_BASE + 320)
-#define __NR_set_mempolicy (__NR_SYSCALL_BASE + 321)
-#define __NR_openat (__NR_SYSCALL_BASE + 322)
-#define __NR_mkdirat (__NR_SYSCALL_BASE + 323)
-#define __NR_mknodat (__NR_SYSCALL_BASE + 324)
-#define __NR_fchownat (__NR_SYSCALL_BASE + 325)
-#define __NR_futimesat (__NR_SYSCALL_BASE + 326)
-#define __NR_fstatat64 (__NR_SYSCALL_BASE + 327)
-#define __NR_unlinkat (__NR_SYSCALL_BASE + 328)
-#define __NR_renameat (__NR_SYSCALL_BASE + 329)
-#define __NR_linkat (__NR_SYSCALL_BASE + 330)
-#define __NR_symlinkat (__NR_SYSCALL_BASE + 331)
-#define __NR_readlinkat (__NR_SYSCALL_BASE + 332)
-#define __NR_fchmodat (__NR_SYSCALL_BASE + 333)
-#define __NR_faccessat (__NR_SYSCALL_BASE + 334)
-#define __NR_pselect6 (__NR_SYSCALL_BASE + 335)
-#define __NR_ppoll (__NR_SYSCALL_BASE + 336)
-#define __NR_unshare (__NR_SYSCALL_BASE + 337)
-#define __NR_set_robust_list (__NR_SYSCALL_BASE + 338)
-#define __NR_get_robust_list (__NR_SYSCALL_BASE + 339)
-#define __NR_splice (__NR_SYSCALL_BASE + 340)
-#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE + 341)
-#define __NR_tee (__NR_SYSCALL_BASE + 342)
-#define __NR_vmsplice (__NR_SYSCALL_BASE + 343)
-#define __NR_move_pages (__NR_SYSCALL_BASE + 344)
-#define __NR_getcpu (__NR_SYSCALL_BASE + 345)
-#define __NR_epoll_pwait (__NR_SYSCALL_BASE + 346)
-#define __NR_kexec_load (__NR_SYSCALL_BASE + 347)
-#define __NR_utimensat (__NR_SYSCALL_BASE + 348)
-#define __NR_signalfd (__NR_SYSCALL_BASE + 349)
-#define __NR_timerfd_create (__NR_SYSCALL_BASE + 350)
-#define __NR_eventfd (__NR_SYSCALL_BASE + 351)
-#define __NR_fallocate (__NR_SYSCALL_BASE + 352)
-#define __NR_timerfd_settime (__NR_SYSCALL_BASE + 353)
-#define __NR_timerfd_gettime (__NR_SYSCALL_BASE + 354)
-#define __NR_signalfd4 (__NR_SYSCALL_BASE + 355)
-#define __NR_eventfd2 (__NR_SYSCALL_BASE + 356)
-#define __NR_epoll_create1 (__NR_SYSCALL_BASE + 357)
-#define __NR_dup3 (__NR_SYSCALL_BASE + 358)
-#define __NR_pipe2 (__NR_SYSCALL_BASE + 359)
-#define __NR_inotify_init1 (__NR_SYSCALL_BASE + 360)
-#define __NR_preadv (__NR_SYSCALL_BASE + 361)
-#define __NR_pwritev (__NR_SYSCALL_BASE + 362)
-#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE + 363)
-#define __NR_perf_event_open (__NR_SYSCALL_BASE + 364)
-#define __NR_recvmmsg (__NR_SYSCALL_BASE + 365)
-#define __NR_accept4 (__NR_SYSCALL_BASE + 366)
-#define __NR_fanotify_init (__NR_SYSCALL_BASE + 367)
-#define __NR_fanotify_mark (__NR_SYSCALL_BASE + 368)
-#define __NR_prlimit64 (__NR_SYSCALL_BASE + 369)
-#define __NR_name_to_handle_at (__NR_SYSCALL_BASE + 370)
-#define __NR_open_by_handle_at (__NR_SYSCALL_BASE + 371)
-#define __NR_clock_adjtime (__NR_SYSCALL_BASE + 372)
-#define __NR_syncfs (__NR_SYSCALL_BASE + 373)
-#define __NR_sendmmsg (__NR_SYSCALL_BASE + 374)
-#define __NR_setns (__NR_SYSCALL_BASE + 375)
-#define __NR_process_vm_readv (__NR_SYSCALL_BASE + 376)
-#define __NR_process_vm_writev (__NR_SYSCALL_BASE + 377)
-#define __NR_kcmp (__NR_SYSCALL_BASE + 378)
-#define __NR_finit_module (__NR_SYSCALL_BASE + 379)
-#define __NR_sched_setattr (__NR_SYSCALL_BASE + 380)
-#define __NR_sched_getattr (__NR_SYSCALL_BASE + 381)
-#define __NR_renameat2 (__NR_SYSCALL_BASE + 382)
-#define __NR_seccomp (__NR_SYSCALL_BASE + 383)
-#define __NR_getrandom (__NR_SYSCALL_BASE + 384)
-#define __NR_memfd_create (__NR_SYSCALL_BASE + 385)
-#define __NR_bpf (__NR_SYSCALL_BASE + 386)
-#define __NR_execveat (__NR_SYSCALL_BASE + 387)
-#define __NR_userfaultfd (__NR_SYSCALL_BASE + 388)
-#define __NR_membarrier (__NR_SYSCALL_BASE + 389)
-#define __NR_mlock2 (__NR_SYSCALL_BASE + 390)
-#define __NR_copy_file_range (__NR_SYSCALL_BASE + 391)
-#define __NR_preadv2 (__NR_SYSCALL_BASE + 392)
-#define __NR_pwritev2 (__NR_SYSCALL_BASE + 393)
-#define __NR_pkey_mprotect (__NR_SYSCALL_BASE + 394)
-#define __NR_pkey_alloc (__NR_SYSCALL_BASE + 395)
-#define __NR_pkey_free (__NR_SYSCALL_BASE + 396)
-#define __NR_statx (__NR_SYSCALL_BASE + 397)
-#define __NR_rseq (__NR_SYSCALL_BASE + 398)
-#define __NR_io_pgetevents (__NR_SYSCALL_BASE + 399)
-#define __NR_migrate_pages (__NR_SYSCALL_BASE + 400)
-#define __NR_kexec_file_load (__NR_SYSCALL_BASE + 401)
-#define __NR_clock_gettime64 (__NR_SYSCALL_BASE + 403)
-#define __NR_clock_settime64 (__NR_SYSCALL_BASE + 404)
-#define __NR_clock_adjtime64 (__NR_SYSCALL_BASE + 405)
-#define __NR_clock_getres_time64 (__NR_SYSCALL_BASE + 406)
-#define __NR_clock_nanosleep_time64 (__NR_SYSCALL_BASE + 407)
-#define __NR_timer_gettime64 (__NR_SYSCALL_BASE + 408)
-#define __NR_timer_settime64 (__NR_SYSCALL_BASE + 409)
-#define __NR_timerfd_gettime64 (__NR_SYSCALL_BASE + 410)
-#define __NR_timerfd_settime64 (__NR_SYSCALL_BASE + 411)
-#define __NR_utimensat_time64 (__NR_SYSCALL_BASE + 412)
-#define __NR_pselect6_time64 (__NR_SYSCALL_BASE + 413)
-#define __NR_ppoll_time64 (__NR_SYSCALL_BASE + 414)
-#define __NR_io_pgetevents_time64 (__NR_SYSCALL_BASE + 416)
-#define __NR_recvmmsg_time64 (__NR_SYSCALL_BASE + 417)
-#define __NR_mq_timedsend_time64 (__NR_SYSCALL_BASE + 418)
-#define __NR_mq_timedreceive_time64 (__NR_SYSCALL_BASE + 419)
-#define __NR_semtimedop_time64 (__NR_SYSCALL_BASE + 420)
-#define __NR_rt_sigtimedwait_time64 (__NR_SYSCALL_BASE + 421)
-#define __NR_futex_time64 (__NR_SYSCALL_BASE + 422)
-#define __NR_sched_rr_get_interval_time64 (__NR_SYSCALL_BASE + 423)
-#define __NR_pidfd_send_signal (__NR_SYSCALL_BASE + 424)
-#define __NR_io_uring_setup (__NR_SYSCALL_BASE + 425)
-#define __NR_io_uring_enter (__NR_SYSCALL_BASE + 426)
-#define __NR_io_uring_register (__NR_SYSCALL_BASE + 427)
-#define __NR_open_tree (__NR_SYSCALL_BASE + 428)
-#define __NR_move_mount (__NR_SYSCALL_BASE + 429)
-#define __NR_fsopen (__NR_SYSCALL_BASE + 430)
-#define __NR_fsconfig (__NR_SYSCALL_BASE + 431)
-#define __NR_fsmount (__NR_SYSCALL_BASE + 432)
-#define __NR_fspick (__NR_SYSCALL_BASE + 433)
-#define __NR_pidfd_open (__NR_SYSCALL_BASE + 434)
-#define __NR_clone3 (__NR_SYSCALL_BASE + 435)
-#define __NR_close_range (__NR_SYSCALL_BASE + 436)
-#define __NR_openat2 (__NR_SYSCALL_BASE + 437)
-#define __NR_pidfd_getfd (__NR_SYSCALL_BASE + 438)
-#define __NR_faccessat2 (__NR_SYSCALL_BASE + 439)
-#define __NR_process_madvise (__NR_SYSCALL_BASE + 440)
-#define __NR_epoll_pwait2 (__NR_SYSCALL_BASE + 441)
-#define __NR_mount_setattr (__NR_SYSCALL_BASE + 442)
-
-#endif /* _UAPI_ASM_ARM_UNISTD_COMMON_H */
diff --git a/original/uapi/asm-arm/asm/unistd-eabi.h b/original/uapi/asm-arm/asm/unistd-eabi.h
index 274bb88..55f8300 100644
--- a/original/uapi/asm-arm/asm/unistd-eabi.h
+++ b/original/uapi/asm-arm/asm/unistd-eabi.h
@@ -1,5 +1,408 @@
-#ifndef _UAPI_ASM_ARM_UNISTD_EABI_H
-#define _UAPI_ASM_ARM_UNISTD_EABI_H 1
+#ifndef _UAPI_ASM_UNISTD_EABI_H
+#define _UAPI_ASM_UNISTD_EABI_H
+#define __NR_restart_syscall (__NR_SYSCALL_BASE + 0)
+#define __NR_exit (__NR_SYSCALL_BASE + 1)
+#define __NR_fork (__NR_SYSCALL_BASE + 2)
+#define __NR_read (__NR_SYSCALL_BASE + 3)
+#define __NR_write (__NR_SYSCALL_BASE + 4)
+#define __NR_open (__NR_SYSCALL_BASE + 5)
+#define __NR_close (__NR_SYSCALL_BASE + 6)
+#define __NR_creat (__NR_SYSCALL_BASE + 8)
+#define __NR_link (__NR_SYSCALL_BASE + 9)
+#define __NR_unlink (__NR_SYSCALL_BASE + 10)
+#define __NR_execve (__NR_SYSCALL_BASE + 11)
+#define __NR_chdir (__NR_SYSCALL_BASE + 12)
+#define __NR_mknod (__NR_SYSCALL_BASE + 14)
+#define __NR_chmod (__NR_SYSCALL_BASE + 15)
+#define __NR_lchown (__NR_SYSCALL_BASE + 16)
+#define __NR_lseek (__NR_SYSCALL_BASE + 19)
+#define __NR_getpid (__NR_SYSCALL_BASE + 20)
+#define __NR_mount (__NR_SYSCALL_BASE + 21)
+#define __NR_setuid (__NR_SYSCALL_BASE + 23)
+#define __NR_getuid (__NR_SYSCALL_BASE + 24)
+#define __NR_ptrace (__NR_SYSCALL_BASE + 26)
+#define __NR_pause (__NR_SYSCALL_BASE + 29)
+#define __NR_access (__NR_SYSCALL_BASE + 33)
+#define __NR_nice (__NR_SYSCALL_BASE + 34)
+#define __NR_sync (__NR_SYSCALL_BASE + 36)
+#define __NR_kill (__NR_SYSCALL_BASE + 37)
+#define __NR_rename (__NR_SYSCALL_BASE + 38)
+#define __NR_mkdir (__NR_SYSCALL_BASE + 39)
+#define __NR_rmdir (__NR_SYSCALL_BASE + 40)
+#define __NR_dup (__NR_SYSCALL_BASE + 41)
+#define __NR_pipe (__NR_SYSCALL_BASE + 42)
+#define __NR_times (__NR_SYSCALL_BASE + 43)
+#define __NR_brk (__NR_SYSCALL_BASE + 45)
+#define __NR_setgid (__NR_SYSCALL_BASE + 46)
+#define __NR_getgid (__NR_SYSCALL_BASE + 47)
+#define __NR_geteuid (__NR_SYSCALL_BASE + 49)
+#define __NR_getegid (__NR_SYSCALL_BASE + 50)
+#define __NR_acct (__NR_SYSCALL_BASE + 51)
+#define __NR_umount2 (__NR_SYSCALL_BASE + 52)
+#define __NR_ioctl (__NR_SYSCALL_BASE + 54)
+#define __NR_fcntl (__NR_SYSCALL_BASE + 55)
+#define __NR_setpgid (__NR_SYSCALL_BASE + 57)
+#define __NR_umask (__NR_SYSCALL_BASE + 60)
+#define __NR_chroot (__NR_SYSCALL_BASE + 61)
+#define __NR_ustat (__NR_SYSCALL_BASE + 62)
+#define __NR_dup2 (__NR_SYSCALL_BASE + 63)
+#define __NR_getppid (__NR_SYSCALL_BASE + 64)
+#define __NR_getpgrp (__NR_SYSCALL_BASE + 65)
+#define __NR_setsid (__NR_SYSCALL_BASE + 66)
+#define __NR_sigaction (__NR_SYSCALL_BASE + 67)
+#define __NR_setreuid (__NR_SYSCALL_BASE + 70)
+#define __NR_setregid (__NR_SYSCALL_BASE + 71)
+#define __NR_sigsuspend (__NR_SYSCALL_BASE + 72)
+#define __NR_sigpending (__NR_SYSCALL_BASE + 73)
+#define __NR_sethostname (__NR_SYSCALL_BASE + 74)
+#define __NR_setrlimit (__NR_SYSCALL_BASE + 75)
+#define __NR_getrusage (__NR_SYSCALL_BASE + 77)
+#define __NR_gettimeofday (__NR_SYSCALL_BASE + 78)
+#define __NR_settimeofday (__NR_SYSCALL_BASE + 79)
+#define __NR_getgroups (__NR_SYSCALL_BASE + 80)
+#define __NR_setgroups (__NR_SYSCALL_BASE + 81)
+#define __NR_symlink (__NR_SYSCALL_BASE + 83)
+#define __NR_readlink (__NR_SYSCALL_BASE + 85)
+#define __NR_uselib (__NR_SYSCALL_BASE + 86)
+#define __NR_swapon (__NR_SYSCALL_BASE + 87)
+#define __NR_reboot (__NR_SYSCALL_BASE + 88)
+#define __NR_munmap (__NR_SYSCALL_BASE + 91)
+#define __NR_truncate (__NR_SYSCALL_BASE + 92)
+#define __NR_ftruncate (__NR_SYSCALL_BASE + 93)
+#define __NR_fchmod (__NR_SYSCALL_BASE + 94)
+#define __NR_fchown (__NR_SYSCALL_BASE + 95)
+#define __NR_getpriority (__NR_SYSCALL_BASE + 96)
+#define __NR_setpriority (__NR_SYSCALL_BASE + 97)
+#define __NR_statfs (__NR_SYSCALL_BASE + 99)
+#define __NR_fstatfs (__NR_SYSCALL_BASE + 100)
+#define __NR_syslog (__NR_SYSCALL_BASE + 103)
+#define __NR_setitimer (__NR_SYSCALL_BASE + 104)
+#define __NR_getitimer (__NR_SYSCALL_BASE + 105)
+#define __NR_stat (__NR_SYSCALL_BASE + 106)
+#define __NR_lstat (__NR_SYSCALL_BASE + 107)
+#define __NR_fstat (__NR_SYSCALL_BASE + 108)
+#define __NR_vhangup (__NR_SYSCALL_BASE + 111)
+#define __NR_wait4 (__NR_SYSCALL_BASE + 114)
+#define __NR_swapoff (__NR_SYSCALL_BASE + 115)
+#define __NR_sysinfo (__NR_SYSCALL_BASE + 116)
+#define __NR_fsync (__NR_SYSCALL_BASE + 118)
+#define __NR_sigreturn (__NR_SYSCALL_BASE + 119)
+#define __NR_clone (__NR_SYSCALL_BASE + 120)
+#define __NR_setdomainname (__NR_SYSCALL_BASE + 121)
+#define __NR_uname (__NR_SYSCALL_BASE + 122)
+#define __NR_adjtimex (__NR_SYSCALL_BASE + 124)
+#define __NR_mprotect (__NR_SYSCALL_BASE + 125)
+#define __NR_sigprocmask (__NR_SYSCALL_BASE + 126)
+#define __NR_init_module (__NR_SYSCALL_BASE + 128)
+#define __NR_delete_module (__NR_SYSCALL_BASE + 129)
+#define __NR_quotactl (__NR_SYSCALL_BASE + 131)
+#define __NR_getpgid (__NR_SYSCALL_BASE + 132)
+#define __NR_fchdir (__NR_SYSCALL_BASE + 133)
+#define __NR_bdflush (__NR_SYSCALL_BASE + 134)
+#define __NR_sysfs (__NR_SYSCALL_BASE + 135)
+#define __NR_personality (__NR_SYSCALL_BASE + 136)
+#define __NR_setfsuid (__NR_SYSCALL_BASE + 138)
+#define __NR_setfsgid (__NR_SYSCALL_BASE + 139)
+#define __NR__llseek (__NR_SYSCALL_BASE + 140)
+#define __NR_getdents (__NR_SYSCALL_BASE + 141)
+#define __NR__newselect (__NR_SYSCALL_BASE + 142)
+#define __NR_flock (__NR_SYSCALL_BASE + 143)
+#define __NR_msync (__NR_SYSCALL_BASE + 144)
+#define __NR_readv (__NR_SYSCALL_BASE + 145)
+#define __NR_writev (__NR_SYSCALL_BASE + 146)
+#define __NR_getsid (__NR_SYSCALL_BASE + 147)
+#define __NR_fdatasync (__NR_SYSCALL_BASE + 148)
+#define __NR__sysctl (__NR_SYSCALL_BASE + 149)
+#define __NR_mlock (__NR_SYSCALL_BASE + 150)
+#define __NR_munlock (__NR_SYSCALL_BASE + 151)
+#define __NR_mlockall (__NR_SYSCALL_BASE + 152)
+#define __NR_munlockall (__NR_SYSCALL_BASE + 153)
+#define __NR_sched_setparam (__NR_SYSCALL_BASE + 154)
+#define __NR_sched_getparam (__NR_SYSCALL_BASE + 155)
+#define __NR_sched_setscheduler (__NR_SYSCALL_BASE + 156)
+#define __NR_sched_getscheduler (__NR_SYSCALL_BASE + 157)
+#define __NR_sched_yield (__NR_SYSCALL_BASE + 158)
+#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE + 159)
+#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE + 160)
+#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE + 161)
+#define __NR_nanosleep (__NR_SYSCALL_BASE + 162)
+#define __NR_mremap (__NR_SYSCALL_BASE + 163)
+#define __NR_setresuid (__NR_SYSCALL_BASE + 164)
+#define __NR_getresuid (__NR_SYSCALL_BASE + 165)
+#define __NR_poll (__NR_SYSCALL_BASE + 168)
+#define __NR_nfsservctl (__NR_SYSCALL_BASE + 169)
+#define __NR_setresgid (__NR_SYSCALL_BASE + 170)
+#define __NR_getresgid (__NR_SYSCALL_BASE + 171)
+#define __NR_prctl (__NR_SYSCALL_BASE + 172)
+#define __NR_rt_sigreturn (__NR_SYSCALL_BASE + 173)
+#define __NR_rt_sigaction (__NR_SYSCALL_BASE + 174)
+#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE + 175)
+#define __NR_rt_sigpending (__NR_SYSCALL_BASE + 176)
+#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE + 177)
+#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE + 178)
+#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE + 179)
+#define __NR_pread64 (__NR_SYSCALL_BASE + 180)
+#define __NR_pwrite64 (__NR_SYSCALL_BASE + 181)
+#define __NR_chown (__NR_SYSCALL_BASE + 182)
+#define __NR_getcwd (__NR_SYSCALL_BASE + 183)
+#define __NR_capget (__NR_SYSCALL_BASE + 184)
+#define __NR_capset (__NR_SYSCALL_BASE + 185)
+#define __NR_sigaltstack (__NR_SYSCALL_BASE + 186)
+#define __NR_sendfile (__NR_SYSCALL_BASE + 187)
+#define __NR_vfork (__NR_SYSCALL_BASE + 190)
+#define __NR_ugetrlimit (__NR_SYSCALL_BASE + 191)
+#define __NR_mmap2 (__NR_SYSCALL_BASE + 192)
+#define __NR_truncate64 (__NR_SYSCALL_BASE + 193)
+#define __NR_ftruncate64 (__NR_SYSCALL_BASE + 194)
+#define __NR_stat64 (__NR_SYSCALL_BASE + 195)
+#define __NR_lstat64 (__NR_SYSCALL_BASE + 196)
+#define __NR_fstat64 (__NR_SYSCALL_BASE + 197)
+#define __NR_lchown32 (__NR_SYSCALL_BASE + 198)
+#define __NR_getuid32 (__NR_SYSCALL_BASE + 199)
+#define __NR_getgid32 (__NR_SYSCALL_BASE + 200)
+#define __NR_geteuid32 (__NR_SYSCALL_BASE + 201)
+#define __NR_getegid32 (__NR_SYSCALL_BASE + 202)
+#define __NR_setreuid32 (__NR_SYSCALL_BASE + 203)
+#define __NR_setregid32 (__NR_SYSCALL_BASE + 204)
+#define __NR_getgroups32 (__NR_SYSCALL_BASE + 205)
+#define __NR_setgroups32 (__NR_SYSCALL_BASE + 206)
+#define __NR_fchown32 (__NR_SYSCALL_BASE + 207)
+#define __NR_setresuid32 (__NR_SYSCALL_BASE + 208)
+#define __NR_getresuid32 (__NR_SYSCALL_BASE + 209)
+#define __NR_setresgid32 (__NR_SYSCALL_BASE + 210)
+#define __NR_getresgid32 (__NR_SYSCALL_BASE + 211)
+#define __NR_chown32 (__NR_SYSCALL_BASE + 212)
+#define __NR_setuid32 (__NR_SYSCALL_BASE + 213)
+#define __NR_setgid32 (__NR_SYSCALL_BASE + 214)
+#define __NR_setfsuid32 (__NR_SYSCALL_BASE + 215)
+#define __NR_setfsgid32 (__NR_SYSCALL_BASE + 216)
+#define __NR_getdents64 (__NR_SYSCALL_BASE + 217)
+#define __NR_pivot_root (__NR_SYSCALL_BASE + 218)
+#define __NR_mincore (__NR_SYSCALL_BASE + 219)
+#define __NR_madvise (__NR_SYSCALL_BASE + 220)
+#define __NR_fcntl64 (__NR_SYSCALL_BASE + 221)
+#define __NR_gettid (__NR_SYSCALL_BASE + 224)
+#define __NR_readahead (__NR_SYSCALL_BASE + 225)
+#define __NR_setxattr (__NR_SYSCALL_BASE + 226)
+#define __NR_lsetxattr (__NR_SYSCALL_BASE + 227)
+#define __NR_fsetxattr (__NR_SYSCALL_BASE + 228)
+#define __NR_getxattr (__NR_SYSCALL_BASE + 229)
+#define __NR_lgetxattr (__NR_SYSCALL_BASE + 230)
+#define __NR_fgetxattr (__NR_SYSCALL_BASE + 231)
+#define __NR_listxattr (__NR_SYSCALL_BASE + 232)
+#define __NR_llistxattr (__NR_SYSCALL_BASE + 233)
+#define __NR_flistxattr (__NR_SYSCALL_BASE + 234)
+#define __NR_removexattr (__NR_SYSCALL_BASE + 235)
+#define __NR_lremovexattr (__NR_SYSCALL_BASE + 236)
+#define __NR_fremovexattr (__NR_SYSCALL_BASE + 237)
+#define __NR_tkill (__NR_SYSCALL_BASE + 238)
+#define __NR_sendfile64 (__NR_SYSCALL_BASE + 239)
+#define __NR_futex (__NR_SYSCALL_BASE + 240)
+#define __NR_sched_setaffinity (__NR_SYSCALL_BASE + 241)
+#define __NR_sched_getaffinity (__NR_SYSCALL_BASE + 242)
+#define __NR_io_setup (__NR_SYSCALL_BASE + 243)
+#define __NR_io_destroy (__NR_SYSCALL_BASE + 244)
+#define __NR_io_getevents (__NR_SYSCALL_BASE + 245)
+#define __NR_io_submit (__NR_SYSCALL_BASE + 246)
+#define __NR_io_cancel (__NR_SYSCALL_BASE + 247)
+#define __NR_exit_group (__NR_SYSCALL_BASE + 248)
+#define __NR_lookup_dcookie (__NR_SYSCALL_BASE + 249)
+#define __NR_epoll_create (__NR_SYSCALL_BASE + 250)
+#define __NR_epoll_ctl (__NR_SYSCALL_BASE + 251)
+#define __NR_epoll_wait (__NR_SYSCALL_BASE + 252)
+#define __NR_remap_file_pages (__NR_SYSCALL_BASE + 253)
+#define __NR_set_tid_address (__NR_SYSCALL_BASE + 256)
+#define __NR_timer_create (__NR_SYSCALL_BASE + 257)
+#define __NR_timer_settime (__NR_SYSCALL_BASE + 258)
+#define __NR_timer_gettime (__NR_SYSCALL_BASE + 259)
+#define __NR_timer_getoverrun (__NR_SYSCALL_BASE + 260)
+#define __NR_timer_delete (__NR_SYSCALL_BASE + 261)
+#define __NR_clock_settime (__NR_SYSCALL_BASE + 262)
+#define __NR_clock_gettime (__NR_SYSCALL_BASE + 263)
+#define __NR_clock_getres (__NR_SYSCALL_BASE + 264)
+#define __NR_clock_nanosleep (__NR_SYSCALL_BASE + 265)
+#define __NR_statfs64 (__NR_SYSCALL_BASE + 266)
+#define __NR_fstatfs64 (__NR_SYSCALL_BASE + 267)
+#define __NR_tgkill (__NR_SYSCALL_BASE + 268)
+#define __NR_utimes (__NR_SYSCALL_BASE + 269)
+#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE + 270)
+#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE + 271)
+#define __NR_pciconfig_read (__NR_SYSCALL_BASE + 272)
+#define __NR_pciconfig_write (__NR_SYSCALL_BASE + 273)
+#define __NR_mq_open (__NR_SYSCALL_BASE + 274)
+#define __NR_mq_unlink (__NR_SYSCALL_BASE + 275)
+#define __NR_mq_timedsend (__NR_SYSCALL_BASE + 276)
+#define __NR_mq_timedreceive (__NR_SYSCALL_BASE + 277)
+#define __NR_mq_notify (__NR_SYSCALL_BASE + 278)
+#define __NR_mq_getsetattr (__NR_SYSCALL_BASE + 279)
+#define __NR_waitid (__NR_SYSCALL_BASE + 280)
+#define __NR_socket (__NR_SYSCALL_BASE + 281)
+#define __NR_bind (__NR_SYSCALL_BASE + 282)
+#define __NR_connect (__NR_SYSCALL_BASE + 283)
+#define __NR_listen (__NR_SYSCALL_BASE + 284)
+#define __NR_accept (__NR_SYSCALL_BASE + 285)
+#define __NR_getsockname (__NR_SYSCALL_BASE + 286)
+#define __NR_getpeername (__NR_SYSCALL_BASE + 287)
+#define __NR_socketpair (__NR_SYSCALL_BASE + 288)
+#define __NR_send (__NR_SYSCALL_BASE + 289)
+#define __NR_sendto (__NR_SYSCALL_BASE + 290)
+#define __NR_recv (__NR_SYSCALL_BASE + 291)
+#define __NR_recvfrom (__NR_SYSCALL_BASE + 292)
+#define __NR_shutdown (__NR_SYSCALL_BASE + 293)
+#define __NR_setsockopt (__NR_SYSCALL_BASE + 294)
+#define __NR_getsockopt (__NR_SYSCALL_BASE + 295)
+#define __NR_sendmsg (__NR_SYSCALL_BASE + 296)
+#define __NR_recvmsg (__NR_SYSCALL_BASE + 297)
+#define __NR_semop (__NR_SYSCALL_BASE + 298)
+#define __NR_semget (__NR_SYSCALL_BASE + 299)
+#define __NR_semctl (__NR_SYSCALL_BASE + 300)
+#define __NR_msgsnd (__NR_SYSCALL_BASE + 301)
+#define __NR_msgrcv (__NR_SYSCALL_BASE + 302)
+#define __NR_msgget (__NR_SYSCALL_BASE + 303)
+#define __NR_msgctl (__NR_SYSCALL_BASE + 304)
+#define __NR_shmat (__NR_SYSCALL_BASE + 305)
+#define __NR_shmdt (__NR_SYSCALL_BASE + 306)
+#define __NR_shmget (__NR_SYSCALL_BASE + 307)
+#define __NR_shmctl (__NR_SYSCALL_BASE + 308)
+#define __NR_add_key (__NR_SYSCALL_BASE + 309)
+#define __NR_request_key (__NR_SYSCALL_BASE + 310)
+#define __NR_keyctl (__NR_SYSCALL_BASE + 311)
+#define __NR_semtimedop (__NR_SYSCALL_BASE + 312)
+#define __NR_vserver (__NR_SYSCALL_BASE + 313)
+#define __NR_ioprio_set (__NR_SYSCALL_BASE + 314)
+#define __NR_ioprio_get (__NR_SYSCALL_BASE + 315)
+#define __NR_inotify_init (__NR_SYSCALL_BASE + 316)
+#define __NR_inotify_add_watch (__NR_SYSCALL_BASE + 317)
+#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE + 318)
+#define __NR_mbind (__NR_SYSCALL_BASE + 319)
+#define __NR_get_mempolicy (__NR_SYSCALL_BASE + 320)
+#define __NR_set_mempolicy (__NR_SYSCALL_BASE + 321)
+#define __NR_openat (__NR_SYSCALL_BASE + 322)
+#define __NR_mkdirat (__NR_SYSCALL_BASE + 323)
+#define __NR_mknodat (__NR_SYSCALL_BASE + 324)
+#define __NR_fchownat (__NR_SYSCALL_BASE + 325)
+#define __NR_futimesat (__NR_SYSCALL_BASE + 326)
+#define __NR_fstatat64 (__NR_SYSCALL_BASE + 327)
+#define __NR_unlinkat (__NR_SYSCALL_BASE + 328)
+#define __NR_renameat (__NR_SYSCALL_BASE + 329)
+#define __NR_linkat (__NR_SYSCALL_BASE + 330)
+#define __NR_symlinkat (__NR_SYSCALL_BASE + 331)
+#define __NR_readlinkat (__NR_SYSCALL_BASE + 332)
+#define __NR_fchmodat (__NR_SYSCALL_BASE + 333)
+#define __NR_faccessat (__NR_SYSCALL_BASE + 334)
+#define __NR_pselect6 (__NR_SYSCALL_BASE + 335)
+#define __NR_ppoll (__NR_SYSCALL_BASE + 336)
+#define __NR_unshare (__NR_SYSCALL_BASE + 337)
+#define __NR_set_robust_list (__NR_SYSCALL_BASE + 338)
+#define __NR_get_robust_list (__NR_SYSCALL_BASE + 339)
+#define __NR_splice (__NR_SYSCALL_BASE + 340)
+#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE + 341)
+#define __NR_tee (__NR_SYSCALL_BASE + 342)
+#define __NR_vmsplice (__NR_SYSCALL_BASE + 343)
+#define __NR_move_pages (__NR_SYSCALL_BASE + 344)
+#define __NR_getcpu (__NR_SYSCALL_BASE + 345)
+#define __NR_epoll_pwait (__NR_SYSCALL_BASE + 346)
+#define __NR_kexec_load (__NR_SYSCALL_BASE + 347)
+#define __NR_utimensat (__NR_SYSCALL_BASE + 348)
+#define __NR_signalfd (__NR_SYSCALL_BASE + 349)
+#define __NR_timerfd_create (__NR_SYSCALL_BASE + 350)
+#define __NR_eventfd (__NR_SYSCALL_BASE + 351)
+#define __NR_fallocate (__NR_SYSCALL_BASE + 352)
+#define __NR_timerfd_settime (__NR_SYSCALL_BASE + 353)
+#define __NR_timerfd_gettime (__NR_SYSCALL_BASE + 354)
+#define __NR_signalfd4 (__NR_SYSCALL_BASE + 355)
+#define __NR_eventfd2 (__NR_SYSCALL_BASE + 356)
+#define __NR_epoll_create1 (__NR_SYSCALL_BASE + 357)
+#define __NR_dup3 (__NR_SYSCALL_BASE + 358)
+#define __NR_pipe2 (__NR_SYSCALL_BASE + 359)
+#define __NR_inotify_init1 (__NR_SYSCALL_BASE + 360)
+#define __NR_preadv (__NR_SYSCALL_BASE + 361)
+#define __NR_pwritev (__NR_SYSCALL_BASE + 362)
+#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE + 363)
+#define __NR_perf_event_open (__NR_SYSCALL_BASE + 364)
+#define __NR_recvmmsg (__NR_SYSCALL_BASE + 365)
+#define __NR_accept4 (__NR_SYSCALL_BASE + 366)
+#define __NR_fanotify_init (__NR_SYSCALL_BASE + 367)
+#define __NR_fanotify_mark (__NR_SYSCALL_BASE + 368)
+#define __NR_prlimit64 (__NR_SYSCALL_BASE + 369)
+#define __NR_name_to_handle_at (__NR_SYSCALL_BASE + 370)
+#define __NR_open_by_handle_at (__NR_SYSCALL_BASE + 371)
+#define __NR_clock_adjtime (__NR_SYSCALL_BASE + 372)
+#define __NR_syncfs (__NR_SYSCALL_BASE + 373)
+#define __NR_sendmmsg (__NR_SYSCALL_BASE + 374)
+#define __NR_setns (__NR_SYSCALL_BASE + 375)
+#define __NR_process_vm_readv (__NR_SYSCALL_BASE + 376)
+#define __NR_process_vm_writev (__NR_SYSCALL_BASE + 377)
+#define __NR_kcmp (__NR_SYSCALL_BASE + 378)
+#define __NR_finit_module (__NR_SYSCALL_BASE + 379)
+#define __NR_sched_setattr (__NR_SYSCALL_BASE + 380)
+#define __NR_sched_getattr (__NR_SYSCALL_BASE + 381)
+#define __NR_renameat2 (__NR_SYSCALL_BASE + 382)
+#define __NR_seccomp (__NR_SYSCALL_BASE + 383)
+#define __NR_getrandom (__NR_SYSCALL_BASE + 384)
+#define __NR_memfd_create (__NR_SYSCALL_BASE + 385)
+#define __NR_bpf (__NR_SYSCALL_BASE + 386)
+#define __NR_execveat (__NR_SYSCALL_BASE + 387)
+#define __NR_userfaultfd (__NR_SYSCALL_BASE + 388)
+#define __NR_membarrier (__NR_SYSCALL_BASE + 389)
+#define __NR_mlock2 (__NR_SYSCALL_BASE + 390)
+#define __NR_copy_file_range (__NR_SYSCALL_BASE + 391)
+#define __NR_preadv2 (__NR_SYSCALL_BASE + 392)
+#define __NR_pwritev2 (__NR_SYSCALL_BASE + 393)
+#define __NR_pkey_mprotect (__NR_SYSCALL_BASE + 394)
+#define __NR_pkey_alloc (__NR_SYSCALL_BASE + 395)
+#define __NR_pkey_free (__NR_SYSCALL_BASE + 396)
+#define __NR_statx (__NR_SYSCALL_BASE + 397)
+#define __NR_rseq (__NR_SYSCALL_BASE + 398)
+#define __NR_io_pgetevents (__NR_SYSCALL_BASE + 399)
+#define __NR_migrate_pages (__NR_SYSCALL_BASE + 400)
+#define __NR_kexec_file_load (__NR_SYSCALL_BASE + 401)
+#define __NR_clock_gettime64 (__NR_SYSCALL_BASE + 403)
+#define __NR_clock_settime64 (__NR_SYSCALL_BASE + 404)
+#define __NR_clock_adjtime64 (__NR_SYSCALL_BASE + 405)
+#define __NR_clock_getres_time64 (__NR_SYSCALL_BASE + 406)
+#define __NR_clock_nanosleep_time64 (__NR_SYSCALL_BASE + 407)
+#define __NR_timer_gettime64 (__NR_SYSCALL_BASE + 408)
+#define __NR_timer_settime64 (__NR_SYSCALL_BASE + 409)
+#define __NR_timerfd_gettime64 (__NR_SYSCALL_BASE + 410)
+#define __NR_timerfd_settime64 (__NR_SYSCALL_BASE + 411)
+#define __NR_utimensat_time64 (__NR_SYSCALL_BASE + 412)
+#define __NR_pselect6_time64 (__NR_SYSCALL_BASE + 413)
+#define __NR_ppoll_time64 (__NR_SYSCALL_BASE + 414)
+#define __NR_io_pgetevents_time64 (__NR_SYSCALL_BASE + 416)
+#define __NR_recvmmsg_time64 (__NR_SYSCALL_BASE + 417)
+#define __NR_mq_timedsend_time64 (__NR_SYSCALL_BASE + 418)
+#define __NR_mq_timedreceive_time64 (__NR_SYSCALL_BASE + 419)
+#define __NR_semtimedop_time64 (__NR_SYSCALL_BASE + 420)
+#define __NR_rt_sigtimedwait_time64 (__NR_SYSCALL_BASE + 421)
+#define __NR_futex_time64 (__NR_SYSCALL_BASE + 422)
+#define __NR_sched_rr_get_interval_time64 (__NR_SYSCALL_BASE + 423)
+#define __NR_pidfd_send_signal (__NR_SYSCALL_BASE + 424)
+#define __NR_io_uring_setup (__NR_SYSCALL_BASE + 425)
+#define __NR_io_uring_enter (__NR_SYSCALL_BASE + 426)
+#define __NR_io_uring_register (__NR_SYSCALL_BASE + 427)
+#define __NR_open_tree (__NR_SYSCALL_BASE + 428)
+#define __NR_move_mount (__NR_SYSCALL_BASE + 429)
+#define __NR_fsopen (__NR_SYSCALL_BASE + 430)
+#define __NR_fsconfig (__NR_SYSCALL_BASE + 431)
+#define __NR_fsmount (__NR_SYSCALL_BASE + 432)
+#define __NR_fspick (__NR_SYSCALL_BASE + 433)
+#define __NR_pidfd_open (__NR_SYSCALL_BASE + 434)
+#define __NR_clone3 (__NR_SYSCALL_BASE + 435)
+#define __NR_close_range (__NR_SYSCALL_BASE + 436)
+#define __NR_openat2 (__NR_SYSCALL_BASE + 437)
+#define __NR_pidfd_getfd (__NR_SYSCALL_BASE + 438)
+#define __NR_faccessat2 (__NR_SYSCALL_BASE + 439)
+#define __NR_process_madvise (__NR_SYSCALL_BASE + 440)
+#define __NR_epoll_pwait2 (__NR_SYSCALL_BASE + 441)
+#define __NR_mount_setattr (__NR_SYSCALL_BASE + 442)
+#define __NR_quotactl_fd (__NR_SYSCALL_BASE + 443)
+#define __NR_landlock_create_ruleset (__NR_SYSCALL_BASE + 444)
+#define __NR_landlock_add_rule (__NR_SYSCALL_BASE + 445)
+#define __NR_landlock_restrict_self (__NR_SYSCALL_BASE + 446)
+#define __NR_process_mrelease (__NR_SYSCALL_BASE + 448)
+#define __NR_futex_waitv (__NR_SYSCALL_BASE + 449)
+#define __NR_set_mempolicy_home_node (__NR_SYSCALL_BASE + 450)
-#endif /* _UAPI_ASM_ARM_UNISTD_EABI_H */
+#endif /* _UAPI_ASM_UNISTD_EABI_H */
diff --git a/original/uapi/asm-arm/asm/unistd-oabi.h b/original/uapi/asm-arm/asm/unistd-oabi.h
index 2281bca..45d0e16 100644
--- a/original/uapi/asm-arm/asm/unistd-oabi.h
+++ b/original/uapi/asm-arm/asm/unistd-oabi.h
@@ -1,17 +1,420 @@
-#ifndef _UAPI_ASM_ARM_UNISTD_OABI_H
-#define _UAPI_ASM_ARM_UNISTD_OABI_H 1
+#ifndef _UAPI_ASM_UNISTD_OABI_H
+#define _UAPI_ASM_UNISTD_OABI_H
+#define __NR_restart_syscall (__NR_SYSCALL_BASE + 0)
+#define __NR_exit (__NR_SYSCALL_BASE + 1)
+#define __NR_fork (__NR_SYSCALL_BASE + 2)
+#define __NR_read (__NR_SYSCALL_BASE + 3)
+#define __NR_write (__NR_SYSCALL_BASE + 4)
+#define __NR_open (__NR_SYSCALL_BASE + 5)
+#define __NR_close (__NR_SYSCALL_BASE + 6)
+#define __NR_creat (__NR_SYSCALL_BASE + 8)
+#define __NR_link (__NR_SYSCALL_BASE + 9)
+#define __NR_unlink (__NR_SYSCALL_BASE + 10)
+#define __NR_execve (__NR_SYSCALL_BASE + 11)
+#define __NR_chdir (__NR_SYSCALL_BASE + 12)
#define __NR_time (__NR_SYSCALL_BASE + 13)
+#define __NR_mknod (__NR_SYSCALL_BASE + 14)
+#define __NR_chmod (__NR_SYSCALL_BASE + 15)
+#define __NR_lchown (__NR_SYSCALL_BASE + 16)
+#define __NR_lseek (__NR_SYSCALL_BASE + 19)
+#define __NR_getpid (__NR_SYSCALL_BASE + 20)
+#define __NR_mount (__NR_SYSCALL_BASE + 21)
#define __NR_umount (__NR_SYSCALL_BASE + 22)
+#define __NR_setuid (__NR_SYSCALL_BASE + 23)
+#define __NR_getuid (__NR_SYSCALL_BASE + 24)
#define __NR_stime (__NR_SYSCALL_BASE + 25)
+#define __NR_ptrace (__NR_SYSCALL_BASE + 26)
#define __NR_alarm (__NR_SYSCALL_BASE + 27)
+#define __NR_pause (__NR_SYSCALL_BASE + 29)
#define __NR_utime (__NR_SYSCALL_BASE + 30)
+#define __NR_access (__NR_SYSCALL_BASE + 33)
+#define __NR_nice (__NR_SYSCALL_BASE + 34)
+#define __NR_sync (__NR_SYSCALL_BASE + 36)
+#define __NR_kill (__NR_SYSCALL_BASE + 37)
+#define __NR_rename (__NR_SYSCALL_BASE + 38)
+#define __NR_mkdir (__NR_SYSCALL_BASE + 39)
+#define __NR_rmdir (__NR_SYSCALL_BASE + 40)
+#define __NR_dup (__NR_SYSCALL_BASE + 41)
+#define __NR_pipe (__NR_SYSCALL_BASE + 42)
+#define __NR_times (__NR_SYSCALL_BASE + 43)
+#define __NR_brk (__NR_SYSCALL_BASE + 45)
+#define __NR_setgid (__NR_SYSCALL_BASE + 46)
+#define __NR_getgid (__NR_SYSCALL_BASE + 47)
+#define __NR_geteuid (__NR_SYSCALL_BASE + 49)
+#define __NR_getegid (__NR_SYSCALL_BASE + 50)
+#define __NR_acct (__NR_SYSCALL_BASE + 51)
+#define __NR_umount2 (__NR_SYSCALL_BASE + 52)
+#define __NR_ioctl (__NR_SYSCALL_BASE + 54)
+#define __NR_fcntl (__NR_SYSCALL_BASE + 55)
+#define __NR_setpgid (__NR_SYSCALL_BASE + 57)
+#define __NR_umask (__NR_SYSCALL_BASE + 60)
+#define __NR_chroot (__NR_SYSCALL_BASE + 61)
+#define __NR_ustat (__NR_SYSCALL_BASE + 62)
+#define __NR_dup2 (__NR_SYSCALL_BASE + 63)
+#define __NR_getppid (__NR_SYSCALL_BASE + 64)
+#define __NR_getpgrp (__NR_SYSCALL_BASE + 65)
+#define __NR_setsid (__NR_SYSCALL_BASE + 66)
+#define __NR_sigaction (__NR_SYSCALL_BASE + 67)
+#define __NR_setreuid (__NR_SYSCALL_BASE + 70)
+#define __NR_setregid (__NR_SYSCALL_BASE + 71)
+#define __NR_sigsuspend (__NR_SYSCALL_BASE + 72)
+#define __NR_sigpending (__NR_SYSCALL_BASE + 73)
+#define __NR_sethostname (__NR_SYSCALL_BASE + 74)
+#define __NR_setrlimit (__NR_SYSCALL_BASE + 75)
#define __NR_getrlimit (__NR_SYSCALL_BASE + 76)
+#define __NR_getrusage (__NR_SYSCALL_BASE + 77)
+#define __NR_gettimeofday (__NR_SYSCALL_BASE + 78)
+#define __NR_settimeofday (__NR_SYSCALL_BASE + 79)
+#define __NR_getgroups (__NR_SYSCALL_BASE + 80)
+#define __NR_setgroups (__NR_SYSCALL_BASE + 81)
#define __NR_select (__NR_SYSCALL_BASE + 82)
+#define __NR_symlink (__NR_SYSCALL_BASE + 83)
+#define __NR_readlink (__NR_SYSCALL_BASE + 85)
+#define __NR_uselib (__NR_SYSCALL_BASE + 86)
+#define __NR_swapon (__NR_SYSCALL_BASE + 87)
+#define __NR_reboot (__NR_SYSCALL_BASE + 88)
#define __NR_readdir (__NR_SYSCALL_BASE + 89)
#define __NR_mmap (__NR_SYSCALL_BASE + 90)
+#define __NR_munmap (__NR_SYSCALL_BASE + 91)
+#define __NR_truncate (__NR_SYSCALL_BASE + 92)
+#define __NR_ftruncate (__NR_SYSCALL_BASE + 93)
+#define __NR_fchmod (__NR_SYSCALL_BASE + 94)
+#define __NR_fchown (__NR_SYSCALL_BASE + 95)
+#define __NR_getpriority (__NR_SYSCALL_BASE + 96)
+#define __NR_setpriority (__NR_SYSCALL_BASE + 97)
+#define __NR_statfs (__NR_SYSCALL_BASE + 99)
+#define __NR_fstatfs (__NR_SYSCALL_BASE + 100)
#define __NR_socketcall (__NR_SYSCALL_BASE + 102)
+#define __NR_syslog (__NR_SYSCALL_BASE + 103)
+#define __NR_setitimer (__NR_SYSCALL_BASE + 104)
+#define __NR_getitimer (__NR_SYSCALL_BASE + 105)
+#define __NR_stat (__NR_SYSCALL_BASE + 106)
+#define __NR_lstat (__NR_SYSCALL_BASE + 107)
+#define __NR_fstat (__NR_SYSCALL_BASE + 108)
+#define __NR_vhangup (__NR_SYSCALL_BASE + 111)
#define __NR_syscall (__NR_SYSCALL_BASE + 113)
+#define __NR_wait4 (__NR_SYSCALL_BASE + 114)
+#define __NR_swapoff (__NR_SYSCALL_BASE + 115)
+#define __NR_sysinfo (__NR_SYSCALL_BASE + 116)
#define __NR_ipc (__NR_SYSCALL_BASE + 117)
+#define __NR_fsync (__NR_SYSCALL_BASE + 118)
+#define __NR_sigreturn (__NR_SYSCALL_BASE + 119)
+#define __NR_clone (__NR_SYSCALL_BASE + 120)
+#define __NR_setdomainname (__NR_SYSCALL_BASE + 121)
+#define __NR_uname (__NR_SYSCALL_BASE + 122)
+#define __NR_adjtimex (__NR_SYSCALL_BASE + 124)
+#define __NR_mprotect (__NR_SYSCALL_BASE + 125)
+#define __NR_sigprocmask (__NR_SYSCALL_BASE + 126)
+#define __NR_init_module (__NR_SYSCALL_BASE + 128)
+#define __NR_delete_module (__NR_SYSCALL_BASE + 129)
+#define __NR_quotactl (__NR_SYSCALL_BASE + 131)
+#define __NR_getpgid (__NR_SYSCALL_BASE + 132)
+#define __NR_fchdir (__NR_SYSCALL_BASE + 133)
+#define __NR_bdflush (__NR_SYSCALL_BASE + 134)
+#define __NR_sysfs (__NR_SYSCALL_BASE + 135)
+#define __NR_personality (__NR_SYSCALL_BASE + 136)
+#define __NR_setfsuid (__NR_SYSCALL_BASE + 138)
+#define __NR_setfsgid (__NR_SYSCALL_BASE + 139)
+#define __NR__llseek (__NR_SYSCALL_BASE + 140)
+#define __NR_getdents (__NR_SYSCALL_BASE + 141)
+#define __NR__newselect (__NR_SYSCALL_BASE + 142)
+#define __NR_flock (__NR_SYSCALL_BASE + 143)
+#define __NR_msync (__NR_SYSCALL_BASE + 144)
+#define __NR_readv (__NR_SYSCALL_BASE + 145)
+#define __NR_writev (__NR_SYSCALL_BASE + 146)
+#define __NR_getsid (__NR_SYSCALL_BASE + 147)
+#define __NR_fdatasync (__NR_SYSCALL_BASE + 148)
+#define __NR__sysctl (__NR_SYSCALL_BASE + 149)
+#define __NR_mlock (__NR_SYSCALL_BASE + 150)
+#define __NR_munlock (__NR_SYSCALL_BASE + 151)
+#define __NR_mlockall (__NR_SYSCALL_BASE + 152)
+#define __NR_munlockall (__NR_SYSCALL_BASE + 153)
+#define __NR_sched_setparam (__NR_SYSCALL_BASE + 154)
+#define __NR_sched_getparam (__NR_SYSCALL_BASE + 155)
+#define __NR_sched_setscheduler (__NR_SYSCALL_BASE + 156)
+#define __NR_sched_getscheduler (__NR_SYSCALL_BASE + 157)
+#define __NR_sched_yield (__NR_SYSCALL_BASE + 158)
+#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE + 159)
+#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE + 160)
+#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE + 161)
+#define __NR_nanosleep (__NR_SYSCALL_BASE + 162)
+#define __NR_mremap (__NR_SYSCALL_BASE + 163)
+#define __NR_setresuid (__NR_SYSCALL_BASE + 164)
+#define __NR_getresuid (__NR_SYSCALL_BASE + 165)
+#define __NR_poll (__NR_SYSCALL_BASE + 168)
+#define __NR_nfsservctl (__NR_SYSCALL_BASE + 169)
+#define __NR_setresgid (__NR_SYSCALL_BASE + 170)
+#define __NR_getresgid (__NR_SYSCALL_BASE + 171)
+#define __NR_prctl (__NR_SYSCALL_BASE + 172)
+#define __NR_rt_sigreturn (__NR_SYSCALL_BASE + 173)
+#define __NR_rt_sigaction (__NR_SYSCALL_BASE + 174)
+#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE + 175)
+#define __NR_rt_sigpending (__NR_SYSCALL_BASE + 176)
+#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE + 177)
+#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE + 178)
+#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE + 179)
+#define __NR_pread64 (__NR_SYSCALL_BASE + 180)
+#define __NR_pwrite64 (__NR_SYSCALL_BASE + 181)
+#define __NR_chown (__NR_SYSCALL_BASE + 182)
+#define __NR_getcwd (__NR_SYSCALL_BASE + 183)
+#define __NR_capget (__NR_SYSCALL_BASE + 184)
+#define __NR_capset (__NR_SYSCALL_BASE + 185)
+#define __NR_sigaltstack (__NR_SYSCALL_BASE + 186)
+#define __NR_sendfile (__NR_SYSCALL_BASE + 187)
+#define __NR_vfork (__NR_SYSCALL_BASE + 190)
+#define __NR_ugetrlimit (__NR_SYSCALL_BASE + 191)
+#define __NR_mmap2 (__NR_SYSCALL_BASE + 192)
+#define __NR_truncate64 (__NR_SYSCALL_BASE + 193)
+#define __NR_ftruncate64 (__NR_SYSCALL_BASE + 194)
+#define __NR_stat64 (__NR_SYSCALL_BASE + 195)
+#define __NR_lstat64 (__NR_SYSCALL_BASE + 196)
+#define __NR_fstat64 (__NR_SYSCALL_BASE + 197)
+#define __NR_lchown32 (__NR_SYSCALL_BASE + 198)
+#define __NR_getuid32 (__NR_SYSCALL_BASE + 199)
+#define __NR_getgid32 (__NR_SYSCALL_BASE + 200)
+#define __NR_geteuid32 (__NR_SYSCALL_BASE + 201)
+#define __NR_getegid32 (__NR_SYSCALL_BASE + 202)
+#define __NR_setreuid32 (__NR_SYSCALL_BASE + 203)
+#define __NR_setregid32 (__NR_SYSCALL_BASE + 204)
+#define __NR_getgroups32 (__NR_SYSCALL_BASE + 205)
+#define __NR_setgroups32 (__NR_SYSCALL_BASE + 206)
+#define __NR_fchown32 (__NR_SYSCALL_BASE + 207)
+#define __NR_setresuid32 (__NR_SYSCALL_BASE + 208)
+#define __NR_getresuid32 (__NR_SYSCALL_BASE + 209)
+#define __NR_setresgid32 (__NR_SYSCALL_BASE + 210)
+#define __NR_getresgid32 (__NR_SYSCALL_BASE + 211)
+#define __NR_chown32 (__NR_SYSCALL_BASE + 212)
+#define __NR_setuid32 (__NR_SYSCALL_BASE + 213)
+#define __NR_setgid32 (__NR_SYSCALL_BASE + 214)
+#define __NR_setfsuid32 (__NR_SYSCALL_BASE + 215)
+#define __NR_setfsgid32 (__NR_SYSCALL_BASE + 216)
+#define __NR_getdents64 (__NR_SYSCALL_BASE + 217)
+#define __NR_pivot_root (__NR_SYSCALL_BASE + 218)
+#define __NR_mincore (__NR_SYSCALL_BASE + 219)
+#define __NR_madvise (__NR_SYSCALL_BASE + 220)
+#define __NR_fcntl64 (__NR_SYSCALL_BASE + 221)
+#define __NR_gettid (__NR_SYSCALL_BASE + 224)
+#define __NR_readahead (__NR_SYSCALL_BASE + 225)
+#define __NR_setxattr (__NR_SYSCALL_BASE + 226)
+#define __NR_lsetxattr (__NR_SYSCALL_BASE + 227)
+#define __NR_fsetxattr (__NR_SYSCALL_BASE + 228)
+#define __NR_getxattr (__NR_SYSCALL_BASE + 229)
+#define __NR_lgetxattr (__NR_SYSCALL_BASE + 230)
+#define __NR_fgetxattr (__NR_SYSCALL_BASE + 231)
+#define __NR_listxattr (__NR_SYSCALL_BASE + 232)
+#define __NR_llistxattr (__NR_SYSCALL_BASE + 233)
+#define __NR_flistxattr (__NR_SYSCALL_BASE + 234)
+#define __NR_removexattr (__NR_SYSCALL_BASE + 235)
+#define __NR_lremovexattr (__NR_SYSCALL_BASE + 236)
+#define __NR_fremovexattr (__NR_SYSCALL_BASE + 237)
+#define __NR_tkill (__NR_SYSCALL_BASE + 238)
+#define __NR_sendfile64 (__NR_SYSCALL_BASE + 239)
+#define __NR_futex (__NR_SYSCALL_BASE + 240)
+#define __NR_sched_setaffinity (__NR_SYSCALL_BASE + 241)
+#define __NR_sched_getaffinity (__NR_SYSCALL_BASE + 242)
+#define __NR_io_setup (__NR_SYSCALL_BASE + 243)
+#define __NR_io_destroy (__NR_SYSCALL_BASE + 244)
+#define __NR_io_getevents (__NR_SYSCALL_BASE + 245)
+#define __NR_io_submit (__NR_SYSCALL_BASE + 246)
+#define __NR_io_cancel (__NR_SYSCALL_BASE + 247)
+#define __NR_exit_group (__NR_SYSCALL_BASE + 248)
+#define __NR_lookup_dcookie (__NR_SYSCALL_BASE + 249)
+#define __NR_epoll_create (__NR_SYSCALL_BASE + 250)
+#define __NR_epoll_ctl (__NR_SYSCALL_BASE + 251)
+#define __NR_epoll_wait (__NR_SYSCALL_BASE + 252)
+#define __NR_remap_file_pages (__NR_SYSCALL_BASE + 253)
+#define __NR_set_tid_address (__NR_SYSCALL_BASE + 256)
+#define __NR_timer_create (__NR_SYSCALL_BASE + 257)
+#define __NR_timer_settime (__NR_SYSCALL_BASE + 258)
+#define __NR_timer_gettime (__NR_SYSCALL_BASE + 259)
+#define __NR_timer_getoverrun (__NR_SYSCALL_BASE + 260)
+#define __NR_timer_delete (__NR_SYSCALL_BASE + 261)
+#define __NR_clock_settime (__NR_SYSCALL_BASE + 262)
+#define __NR_clock_gettime (__NR_SYSCALL_BASE + 263)
+#define __NR_clock_getres (__NR_SYSCALL_BASE + 264)
+#define __NR_clock_nanosleep (__NR_SYSCALL_BASE + 265)
+#define __NR_statfs64 (__NR_SYSCALL_BASE + 266)
+#define __NR_fstatfs64 (__NR_SYSCALL_BASE + 267)
+#define __NR_tgkill (__NR_SYSCALL_BASE + 268)
+#define __NR_utimes (__NR_SYSCALL_BASE + 269)
+#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE + 270)
+#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE + 271)
+#define __NR_pciconfig_read (__NR_SYSCALL_BASE + 272)
+#define __NR_pciconfig_write (__NR_SYSCALL_BASE + 273)
+#define __NR_mq_open (__NR_SYSCALL_BASE + 274)
+#define __NR_mq_unlink (__NR_SYSCALL_BASE + 275)
+#define __NR_mq_timedsend (__NR_SYSCALL_BASE + 276)
+#define __NR_mq_timedreceive (__NR_SYSCALL_BASE + 277)
+#define __NR_mq_notify (__NR_SYSCALL_BASE + 278)
+#define __NR_mq_getsetattr (__NR_SYSCALL_BASE + 279)
+#define __NR_waitid (__NR_SYSCALL_BASE + 280)
+#define __NR_socket (__NR_SYSCALL_BASE + 281)
+#define __NR_bind (__NR_SYSCALL_BASE + 282)
+#define __NR_connect (__NR_SYSCALL_BASE + 283)
+#define __NR_listen (__NR_SYSCALL_BASE + 284)
+#define __NR_accept (__NR_SYSCALL_BASE + 285)
+#define __NR_getsockname (__NR_SYSCALL_BASE + 286)
+#define __NR_getpeername (__NR_SYSCALL_BASE + 287)
+#define __NR_socketpair (__NR_SYSCALL_BASE + 288)
+#define __NR_send (__NR_SYSCALL_BASE + 289)
+#define __NR_sendto (__NR_SYSCALL_BASE + 290)
+#define __NR_recv (__NR_SYSCALL_BASE + 291)
+#define __NR_recvfrom (__NR_SYSCALL_BASE + 292)
+#define __NR_shutdown (__NR_SYSCALL_BASE + 293)
+#define __NR_setsockopt (__NR_SYSCALL_BASE + 294)
+#define __NR_getsockopt (__NR_SYSCALL_BASE + 295)
+#define __NR_sendmsg (__NR_SYSCALL_BASE + 296)
+#define __NR_recvmsg (__NR_SYSCALL_BASE + 297)
+#define __NR_semop (__NR_SYSCALL_BASE + 298)
+#define __NR_semget (__NR_SYSCALL_BASE + 299)
+#define __NR_semctl (__NR_SYSCALL_BASE + 300)
+#define __NR_msgsnd (__NR_SYSCALL_BASE + 301)
+#define __NR_msgrcv (__NR_SYSCALL_BASE + 302)
+#define __NR_msgget (__NR_SYSCALL_BASE + 303)
+#define __NR_msgctl (__NR_SYSCALL_BASE + 304)
+#define __NR_shmat (__NR_SYSCALL_BASE + 305)
+#define __NR_shmdt (__NR_SYSCALL_BASE + 306)
+#define __NR_shmget (__NR_SYSCALL_BASE + 307)
+#define __NR_shmctl (__NR_SYSCALL_BASE + 308)
+#define __NR_add_key (__NR_SYSCALL_BASE + 309)
+#define __NR_request_key (__NR_SYSCALL_BASE + 310)
+#define __NR_keyctl (__NR_SYSCALL_BASE + 311)
+#define __NR_semtimedop (__NR_SYSCALL_BASE + 312)
+#define __NR_vserver (__NR_SYSCALL_BASE + 313)
+#define __NR_ioprio_set (__NR_SYSCALL_BASE + 314)
+#define __NR_ioprio_get (__NR_SYSCALL_BASE + 315)
+#define __NR_inotify_init (__NR_SYSCALL_BASE + 316)
+#define __NR_inotify_add_watch (__NR_SYSCALL_BASE + 317)
+#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE + 318)
+#define __NR_mbind (__NR_SYSCALL_BASE + 319)
+#define __NR_get_mempolicy (__NR_SYSCALL_BASE + 320)
+#define __NR_set_mempolicy (__NR_SYSCALL_BASE + 321)
+#define __NR_openat (__NR_SYSCALL_BASE + 322)
+#define __NR_mkdirat (__NR_SYSCALL_BASE + 323)
+#define __NR_mknodat (__NR_SYSCALL_BASE + 324)
+#define __NR_fchownat (__NR_SYSCALL_BASE + 325)
+#define __NR_futimesat (__NR_SYSCALL_BASE + 326)
+#define __NR_fstatat64 (__NR_SYSCALL_BASE + 327)
+#define __NR_unlinkat (__NR_SYSCALL_BASE + 328)
+#define __NR_renameat (__NR_SYSCALL_BASE + 329)
+#define __NR_linkat (__NR_SYSCALL_BASE + 330)
+#define __NR_symlinkat (__NR_SYSCALL_BASE + 331)
+#define __NR_readlinkat (__NR_SYSCALL_BASE + 332)
+#define __NR_fchmodat (__NR_SYSCALL_BASE + 333)
+#define __NR_faccessat (__NR_SYSCALL_BASE + 334)
+#define __NR_pselect6 (__NR_SYSCALL_BASE + 335)
+#define __NR_ppoll (__NR_SYSCALL_BASE + 336)
+#define __NR_unshare (__NR_SYSCALL_BASE + 337)
+#define __NR_set_robust_list (__NR_SYSCALL_BASE + 338)
+#define __NR_get_robust_list (__NR_SYSCALL_BASE + 339)
+#define __NR_splice (__NR_SYSCALL_BASE + 340)
+#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE + 341)
+#define __NR_tee (__NR_SYSCALL_BASE + 342)
+#define __NR_vmsplice (__NR_SYSCALL_BASE + 343)
+#define __NR_move_pages (__NR_SYSCALL_BASE + 344)
+#define __NR_getcpu (__NR_SYSCALL_BASE + 345)
+#define __NR_epoll_pwait (__NR_SYSCALL_BASE + 346)
+#define __NR_kexec_load (__NR_SYSCALL_BASE + 347)
+#define __NR_utimensat (__NR_SYSCALL_BASE + 348)
+#define __NR_signalfd (__NR_SYSCALL_BASE + 349)
+#define __NR_timerfd_create (__NR_SYSCALL_BASE + 350)
+#define __NR_eventfd (__NR_SYSCALL_BASE + 351)
+#define __NR_fallocate (__NR_SYSCALL_BASE + 352)
+#define __NR_timerfd_settime (__NR_SYSCALL_BASE + 353)
+#define __NR_timerfd_gettime (__NR_SYSCALL_BASE + 354)
+#define __NR_signalfd4 (__NR_SYSCALL_BASE + 355)
+#define __NR_eventfd2 (__NR_SYSCALL_BASE + 356)
+#define __NR_epoll_create1 (__NR_SYSCALL_BASE + 357)
+#define __NR_dup3 (__NR_SYSCALL_BASE + 358)
+#define __NR_pipe2 (__NR_SYSCALL_BASE + 359)
+#define __NR_inotify_init1 (__NR_SYSCALL_BASE + 360)
+#define __NR_preadv (__NR_SYSCALL_BASE + 361)
+#define __NR_pwritev (__NR_SYSCALL_BASE + 362)
+#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE + 363)
+#define __NR_perf_event_open (__NR_SYSCALL_BASE + 364)
+#define __NR_recvmmsg (__NR_SYSCALL_BASE + 365)
+#define __NR_accept4 (__NR_SYSCALL_BASE + 366)
+#define __NR_fanotify_init (__NR_SYSCALL_BASE + 367)
+#define __NR_fanotify_mark (__NR_SYSCALL_BASE + 368)
+#define __NR_prlimit64 (__NR_SYSCALL_BASE + 369)
+#define __NR_name_to_handle_at (__NR_SYSCALL_BASE + 370)
+#define __NR_open_by_handle_at (__NR_SYSCALL_BASE + 371)
+#define __NR_clock_adjtime (__NR_SYSCALL_BASE + 372)
+#define __NR_syncfs (__NR_SYSCALL_BASE + 373)
+#define __NR_sendmmsg (__NR_SYSCALL_BASE + 374)
+#define __NR_setns (__NR_SYSCALL_BASE + 375)
+#define __NR_process_vm_readv (__NR_SYSCALL_BASE + 376)
+#define __NR_process_vm_writev (__NR_SYSCALL_BASE + 377)
+#define __NR_kcmp (__NR_SYSCALL_BASE + 378)
+#define __NR_finit_module (__NR_SYSCALL_BASE + 379)
+#define __NR_sched_setattr (__NR_SYSCALL_BASE + 380)
+#define __NR_sched_getattr (__NR_SYSCALL_BASE + 381)
+#define __NR_renameat2 (__NR_SYSCALL_BASE + 382)
+#define __NR_seccomp (__NR_SYSCALL_BASE + 383)
+#define __NR_getrandom (__NR_SYSCALL_BASE + 384)
+#define __NR_memfd_create (__NR_SYSCALL_BASE + 385)
+#define __NR_bpf (__NR_SYSCALL_BASE + 386)
+#define __NR_execveat (__NR_SYSCALL_BASE + 387)
+#define __NR_userfaultfd (__NR_SYSCALL_BASE + 388)
+#define __NR_membarrier (__NR_SYSCALL_BASE + 389)
+#define __NR_mlock2 (__NR_SYSCALL_BASE + 390)
+#define __NR_copy_file_range (__NR_SYSCALL_BASE + 391)
+#define __NR_preadv2 (__NR_SYSCALL_BASE + 392)
+#define __NR_pwritev2 (__NR_SYSCALL_BASE + 393)
+#define __NR_pkey_mprotect (__NR_SYSCALL_BASE + 394)
+#define __NR_pkey_alloc (__NR_SYSCALL_BASE + 395)
+#define __NR_pkey_free (__NR_SYSCALL_BASE + 396)
+#define __NR_statx (__NR_SYSCALL_BASE + 397)
+#define __NR_rseq (__NR_SYSCALL_BASE + 398)
+#define __NR_io_pgetevents (__NR_SYSCALL_BASE + 399)
+#define __NR_migrate_pages (__NR_SYSCALL_BASE + 400)
+#define __NR_kexec_file_load (__NR_SYSCALL_BASE + 401)
+#define __NR_clock_gettime64 (__NR_SYSCALL_BASE + 403)
+#define __NR_clock_settime64 (__NR_SYSCALL_BASE + 404)
+#define __NR_clock_adjtime64 (__NR_SYSCALL_BASE + 405)
+#define __NR_clock_getres_time64 (__NR_SYSCALL_BASE + 406)
+#define __NR_clock_nanosleep_time64 (__NR_SYSCALL_BASE + 407)
+#define __NR_timer_gettime64 (__NR_SYSCALL_BASE + 408)
+#define __NR_timer_settime64 (__NR_SYSCALL_BASE + 409)
+#define __NR_timerfd_gettime64 (__NR_SYSCALL_BASE + 410)
+#define __NR_timerfd_settime64 (__NR_SYSCALL_BASE + 411)
+#define __NR_utimensat_time64 (__NR_SYSCALL_BASE + 412)
+#define __NR_pselect6_time64 (__NR_SYSCALL_BASE + 413)
+#define __NR_ppoll_time64 (__NR_SYSCALL_BASE + 414)
+#define __NR_io_pgetevents_time64 (__NR_SYSCALL_BASE + 416)
+#define __NR_recvmmsg_time64 (__NR_SYSCALL_BASE + 417)
+#define __NR_mq_timedsend_time64 (__NR_SYSCALL_BASE + 418)
+#define __NR_mq_timedreceive_time64 (__NR_SYSCALL_BASE + 419)
+#define __NR_semtimedop_time64 (__NR_SYSCALL_BASE + 420)
+#define __NR_rt_sigtimedwait_time64 (__NR_SYSCALL_BASE + 421)
+#define __NR_futex_time64 (__NR_SYSCALL_BASE + 422)
+#define __NR_sched_rr_get_interval_time64 (__NR_SYSCALL_BASE + 423)
+#define __NR_pidfd_send_signal (__NR_SYSCALL_BASE + 424)
+#define __NR_io_uring_setup (__NR_SYSCALL_BASE + 425)
+#define __NR_io_uring_enter (__NR_SYSCALL_BASE + 426)
+#define __NR_io_uring_register (__NR_SYSCALL_BASE + 427)
+#define __NR_open_tree (__NR_SYSCALL_BASE + 428)
+#define __NR_move_mount (__NR_SYSCALL_BASE + 429)
+#define __NR_fsopen (__NR_SYSCALL_BASE + 430)
+#define __NR_fsconfig (__NR_SYSCALL_BASE + 431)
+#define __NR_fsmount (__NR_SYSCALL_BASE + 432)
+#define __NR_fspick (__NR_SYSCALL_BASE + 433)
+#define __NR_pidfd_open (__NR_SYSCALL_BASE + 434)
+#define __NR_clone3 (__NR_SYSCALL_BASE + 435)
+#define __NR_close_range (__NR_SYSCALL_BASE + 436)
+#define __NR_openat2 (__NR_SYSCALL_BASE + 437)
+#define __NR_pidfd_getfd (__NR_SYSCALL_BASE + 438)
+#define __NR_faccessat2 (__NR_SYSCALL_BASE + 439)
+#define __NR_process_madvise (__NR_SYSCALL_BASE + 440)
+#define __NR_epoll_pwait2 (__NR_SYSCALL_BASE + 441)
+#define __NR_mount_setattr (__NR_SYSCALL_BASE + 442)
+#define __NR_quotactl_fd (__NR_SYSCALL_BASE + 443)
+#define __NR_landlock_create_ruleset (__NR_SYSCALL_BASE + 444)
+#define __NR_landlock_add_rule (__NR_SYSCALL_BASE + 445)
+#define __NR_landlock_restrict_self (__NR_SYSCALL_BASE + 446)
+#define __NR_process_mrelease (__NR_SYSCALL_BASE + 448)
+#define __NR_futex_waitv (__NR_SYSCALL_BASE + 449)
+#define __NR_set_mempolicy_home_node (__NR_SYSCALL_BASE + 450)
-#endif /* _UAPI_ASM_ARM_UNISTD_OABI_H */
+#endif /* _UAPI_ASM_UNISTD_OABI_H */
diff --git a/original/uapi/asm-arm/asm/unistd.h b/original/uapi/asm-arm/asm/unistd.h
index 93ecf8a..a114991 100644
--- a/original/uapi/asm-arm/asm/unistd.h
+++ b/original/uapi/asm-arm/asm/unistd.h
@@ -15,6 +15,7 @@
#define _UAPI__ASM_ARM_UNISTD_H
#define __NR_OABI_SYSCALL_BASE 0x900000
+#define __NR_SYSCALL_MASK 0x0fffff
#if defined(__thumb__) || defined(__ARM_EABI__)
#define __NR_SYSCALL_BASE 0
@@ -24,7 +25,6 @@
#include <asm/unistd-oabi.h>
#endif
-#include <asm/unistd-common.h>
#define __NR_sync_file_range2 __NR_arm_sync_file_range
/*
diff --git a/original/uapi/asm-arm64/asm/hwcap.h b/original/uapi/asm-arm64/asm/hwcap.h
index b8f41aa..f037318 100644
--- a/original/uapi/asm-arm64/asm/hwcap.h
+++ b/original/uapi/asm-arm64/asm/hwcap.h
@@ -75,5 +75,8 @@
#define HWCAP2_RNG (1 << 16)
#define HWCAP2_BTI (1 << 17)
#define HWCAP2_MTE (1 << 18)
+#define HWCAP2_ECV (1 << 19)
+#define HWCAP2_AFP (1 << 20)
+#define HWCAP2_RPRES (1 << 21)
#endif /* _UAPI__ASM_HWCAP_H */
diff --git a/original/uapi/asm-arm64/asm/kvm.h b/original/uapi/asm-arm64/asm/kvm.h
index 24223ad..323e251 100644
--- a/original/uapi/asm-arm64/asm/kvm.h
+++ b/original/uapi/asm-arm64/asm/kvm.h
@@ -184,6 +184,17 @@
__u32 reserved[12];
};
+struct kvm_arm_copy_mte_tags {
+ __u64 guest_ipa;
+ __u64 length;
+ void __user *addr;
+ __u64 flags;
+ __u64 reserved[2];
+};
+
+#define KVM_ARM_TAGS_TO_GUEST 0
+#define KVM_ARM_TAGS_FROM_GUEST 1
+
/* If you need to interpret the index values, here is the key: */
#define KVM_REG_ARM_COPROC_MASK 0x000000000FFF0000
#define KVM_REG_ARM_COPROC_SHIFT 16
@@ -270,6 +281,11 @@
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3
#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3 KVM_REG_ARM_FW_REG(3)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL 0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL 1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED 2
+
/* SVE registers */
#define KVM_REG_ARM64_SVE (0x15 << KVM_REG_ARM_COPROC_SHIFT)
diff --git a/original/uapi/asm-arm64/asm/unistd.h b/original/uapi/asm-arm64/asm/unistd.h
index f83a70e..ce2ee8f 100644
--- a/original/uapi/asm-arm64/asm/unistd.h
+++ b/original/uapi/asm-arm64/asm/unistd.h
@@ -20,5 +20,6 @@
#define __ARCH_WANT_SET_GET_RLIMIT
#define __ARCH_WANT_TIME32_SYSCALLS
#define __ARCH_WANT_SYS_CLONE3
+#define __ARCH_WANT_MEMFD_SECRET
#include <asm-generic/unistd.h>
diff --git a/original/uapi/asm-generic/fcntl.h b/original/uapi/asm-generic/fcntl.h
index 9dc0bf0..ecd0f5b 100644
--- a/original/uapi/asm-generic/fcntl.h
+++ b/original/uapi/asm-generic/fcntl.h
@@ -181,6 +181,10 @@
blocking */
#define LOCK_UN 8 /* remove lock */
+/*
+ * LOCK_MAND support has been removed from the kernel. We leave the symbols
+ * here to not break legacy builds, but these should not be used in new code.
+ */
#define LOCK_MAND 32 /* This is a mandatory flock ... */
#define LOCK_READ 64 /* which allows concurrent read operations */
#define LOCK_WRITE 128 /* which allows concurrent write operations */
diff --git a/original/uapi/asm-generic/mman-common.h b/original/uapi/asm-generic/mman-common.h
index f94f65d..1567a32 100644
--- a/original/uapi/asm-generic/mman-common.h
+++ b/original/uapi/asm-generic/mman-common.h
@@ -72,6 +72,9 @@
#define MADV_COLD 20 /* deactivate these pages */
#define MADV_PAGEOUT 21 /* reclaim these pages */
+#define MADV_POPULATE_READ 22 /* populate (prefault) page tables readable */
+#define MADV_POPULATE_WRITE 23 /* populate (prefault) page tables writable */
+
/* compatibility flags */
#define MAP_FILE 0
diff --git a/original/uapi/asm-generic/poll.h b/original/uapi/asm-generic/poll.h
index 41b509f..f9c520c 100644
--- a/original/uapi/asm-generic/poll.h
+++ b/original/uapi/asm-generic/poll.h
@@ -29,7 +29,7 @@
#define POLLRDHUP 0x2000
#endif
-#define POLLFREE (__force __poll_t)0x4000 /* currently only for epoll */
+#define POLLFREE (__force __poll_t)0x4000
#define POLL_BUSY_LOOP (__force __poll_t)0x8000
diff --git a/original/uapi/asm-generic/siginfo.h b/original/uapi/asm-generic/siginfo.h
index d259700..3ba180f 100644
--- a/original/uapi/asm-generic/siginfo.h
+++ b/original/uapi/asm-generic/siginfo.h
@@ -29,6 +29,11 @@
#define __ARCH_SI_ATTRIBUTES
#endif
+/*
+ * Be careful when extending this union. On 32bit siginfo_t is 32bit
+ * aligned. Which means that a 64bit field or any other field that
+ * would increase the alignment of siginfo_t will break the ABI.
+ */
union __sifields {
/* kill() */
struct {
@@ -63,9 +68,6 @@
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS, SIGTRAP, SIGEMT */
struct {
void __user *_addr; /* faulting insn/memory ref. */
-#ifdef __ARCH_SI_TRAPNO
- int _trapno; /* TRAP # which caused the signal */
-#endif
#ifdef __ia64__
int _imm; /* immediate value for "break" */
unsigned int _flags; /* see ia64 si_flags */
@@ -75,6 +77,8 @@
#define __ADDR_BND_PKEY_PAD (__alignof__(void *) < sizeof(short) ? \
sizeof(short) : __alignof__(void *))
union {
+ /* used on alpha and sparc */
+ int _trapno; /* TRAP # which caused the signal */
/*
* used when si_code=BUS_MCEERR_AR or
* used when si_code=BUS_MCEERR_AO
@@ -91,6 +95,11 @@
char _dummy_pkey[__ADDR_BND_PKEY_PAD];
__u32 _pkey;
} _addr_pkey;
+ /* used when si_code=TRAP_PERF */
+ struct {
+ unsigned long _data;
+ __u32 _type;
+ } _perf;
};
} _sigfault;
@@ -148,13 +157,13 @@
#define si_int _sifields._rt._sigval.sival_int
#define si_ptr _sifields._rt._sigval.sival_ptr
#define si_addr _sifields._sigfault._addr
-#ifdef __ARCH_SI_TRAPNO
#define si_trapno _sifields._sigfault._trapno
-#endif
#define si_addr_lsb _sifields._sigfault._addr_lsb
#define si_lower _sifields._sigfault._addr_bnd._lower
#define si_upper _sifields._sigfault._addr_bnd._upper
#define si_pkey _sifields._sigfault._addr_pkey._pkey
+#define si_perf_data _sifields._sigfault._perf._data
+#define si_perf_type _sifields._sigfault._perf._type
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#define si_call_addr _sifields._sigsys._call_addr
@@ -253,7 +262,8 @@
#define TRAP_BRANCH 3 /* process taken branch trap */
#define TRAP_HWBKPT 4 /* hardware breakpoint/watchpoint */
#define TRAP_UNK 5 /* undiagnosed trap */
-#define NSIGTRAP 5
+#define TRAP_PERF 6 /* perf event with sigtrap=1 */
+#define NSIGTRAP 6
/*
* There is an additional set of SIGTRAP si_codes used by ptrace
diff --git a/original/uapi/asm-generic/signal-defs.h b/original/uapi/asm-generic/signal-defs.h
index fe929e7..7572f2f 100644
--- a/original/uapi/asm-generic/signal-defs.h
+++ b/original/uapi/asm-generic/signal-defs.h
@@ -45,6 +45,7 @@
#define SA_UNSUPPORTED 0x00000400
#define SA_EXPOSE_TAGBITS 0x00000800
/* 0x00010000 used on mips */
+/* 0x00800000 used for internal SA_IMMUTABLE */
/* 0x01000000 used on x86 */
/* 0x02000000 used on x86 */
/*
diff --git a/original/uapi/asm-generic/socket.h b/original/uapi/asm-generic/socket.h
index 4dcd13d..c77a131 100644
--- a/original/uapi/asm-generic/socket.h
+++ b/original/uapi/asm-generic/socket.h
@@ -122,6 +122,12 @@
#define SO_PREFER_BUSY_POLL 69
#define SO_BUSY_POLL_BUDGET 70
+#define SO_NETNS_COOKIE 71
+
+#define SO_BUF_LOCK 72
+
+#define SO_RESERVE_MEM 73
+
#if !defined(__KERNEL__)
#if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__))
diff --git a/original/uapi/asm-generic/unistd.h b/original/uapi/asm-generic/unistd.h
index ce58cff..1c48b0a 100644
--- a/original/uapi/asm-generic/unistd.h
+++ b/original/uapi/asm-generic/unistd.h
@@ -673,15 +673,15 @@
#define __NR_remap_file_pages 234
__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
#define __NR_mbind 235
-__SC_COMP(__NR_mbind, sys_mbind, compat_sys_mbind)
+__SYSCALL(__NR_mbind, sys_mbind)
#define __NR_get_mempolicy 236
-__SC_COMP(__NR_get_mempolicy, sys_get_mempolicy, compat_sys_get_mempolicy)
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
#define __NR_set_mempolicy 237
-__SC_COMP(__NR_set_mempolicy, sys_set_mempolicy, compat_sys_set_mempolicy)
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
#define __NR_migrate_pages 238
-__SC_COMP(__NR_migrate_pages, sys_migrate_pages, compat_sys_migrate_pages)
+__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
#define __NR_move_pages 239
-__SC_COMP(__NR_move_pages, sys_move_pages, compat_sys_move_pages)
+__SYSCALL(__NR_move_pages, sys_move_pages)
#endif
#define __NR_rt_tgsigqueueinfo 240
@@ -863,9 +863,31 @@
__SC_COMP(__NR_epoll_pwait2, sys_epoll_pwait2, compat_sys_epoll_pwait2)
#define __NR_mount_setattr 442
__SYSCALL(__NR_mount_setattr, sys_mount_setattr)
+#define __NR_quotactl_fd 443
+__SYSCALL(__NR_quotactl_fd, sys_quotactl_fd)
+
+#define __NR_landlock_create_ruleset 444
+__SYSCALL(__NR_landlock_create_ruleset, sys_landlock_create_ruleset)
+#define __NR_landlock_add_rule 445
+__SYSCALL(__NR_landlock_add_rule, sys_landlock_add_rule)
+#define __NR_landlock_restrict_self 446
+__SYSCALL(__NR_landlock_restrict_self, sys_landlock_restrict_self)
+
+#ifdef __ARCH_WANT_MEMFD_SECRET
+#define __NR_memfd_secret 447
+__SYSCALL(__NR_memfd_secret, sys_memfd_secret)
+#endif
+#define __NR_process_mrelease 448
+__SYSCALL(__NR_process_mrelease, sys_process_mrelease)
+
+#define __NR_futex_waitv 449
+__SYSCALL(__NR_futex_waitv, sys_futex_waitv)
+
+#define __NR_set_mempolicy_home_node 450
+__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
#undef __NR_syscalls
-#define __NR_syscalls 443
+#define __NR_syscalls 451
/*
* 32 bit systems traditionally used different
diff --git a/original/uapi/asm-x86/asm/auxvec.h b/original/uapi/asm-x86/asm/auxvec.h
index 580e3c5..6beb55b 100644
--- a/original/uapi/asm-x86/asm/auxvec.h
+++ b/original/uapi/asm-x86/asm/auxvec.h
@@ -12,9 +12,9 @@
/* entries in ARCH_DLINFO: */
#if defined(CONFIG_IA32_EMULATION) || !defined(CONFIG_X86_64)
-# define AT_VECTOR_SIZE_ARCH 2
+# define AT_VECTOR_SIZE_ARCH 3
#else /* else it's non-compat x86-64 */
-# define AT_VECTOR_SIZE_ARCH 1
+# define AT_VECTOR_SIZE_ARCH 2
#endif
#endif /* _ASM_X86_AUXVEC_H */
diff --git a/original/uapi/asm-x86/asm/bootparam.h b/original/uapi/asm-x86/asm/bootparam.h
index 600a141..b25d3f8 100644
--- a/original/uapi/asm-x86/asm/bootparam.h
+++ b/original/uapi/asm-x86/asm/bootparam.h
@@ -234,7 +234,7 @@
* handling of page tables.
*
* These enums should only ever be used by x86 code, and the code that uses
- * it should be well contained and compartamentalized.
+ * it should be well contained and compartmentalized.
*
* KVM and Xen HVM do not have a subarch as these are expected to follow
* standard x86 boot entries. If there is a genuine need for "hypervisor" type
@@ -252,7 +252,7 @@
* @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
* which start at asm startup_xen() entry point and later jump to the C
* xen_start_kernel() entry point. Both domU and dom0 type of guests are
- * currently supportd through this PV boot path.
+ * currently supported through this PV boot path.
* @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
* systems which do not have the PCI legacy interfaces.
* @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
diff --git a/original/uapi/asm-x86/asm/debugreg.h b/original/uapi/asm-x86/asm/debugreg.h
index d95d080..0007ba0 100644
--- a/original/uapi/asm-x86/asm/debugreg.h
+++ b/original/uapi/asm-x86/asm/debugreg.h
@@ -24,6 +24,7 @@
#define DR_TRAP3 (0x8) /* db3 */
#define DR_TRAP_BITS (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)
+#define DR_BUS_LOCK (0x800) /* bus_lock */
#define DR_STEP (0x4000) /* single-step */
#define DR_SWITCH (0x8000) /* task switch */
diff --git a/original/uapi/asm-x86/asm/hwcap2.h b/original/uapi/asm-x86/asm/hwcap2.h
index 5fdfcb4..054604a 100644
--- a/original/uapi/asm-x86/asm/hwcap2.h
+++ b/original/uapi/asm-x86/asm/hwcap2.h
@@ -2,10 +2,12 @@
#ifndef _ASM_X86_HWCAP2_H
#define _ASM_X86_HWCAP2_H
+#include <linux/const.h>
+
/* MONITOR/MWAIT enabled in Ring 3 */
-#define HWCAP2_RING3MWAIT (1 << 0)
+#define HWCAP2_RING3MWAIT _BITUL(0)
/* Kernel allows FSGSBASE instructions available in Ring 3 */
-#define HWCAP2_FSGSBASE BIT(1)
+#define HWCAP2_FSGSBASE _BITUL(1)
#endif
diff --git a/original/uapi/asm-x86/asm/kvm.h b/original/uapi/asm-x86/asm/kvm.h
index 5a3022c..bf6e960 100644
--- a/original/uapi/asm-x86/asm/kvm.h
+++ b/original/uapi/asm-x86/asm/kvm.h
@@ -159,6 +159,19 @@
__u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64];
};
+struct kvm_sregs2 {
+ /* out (KVM_GET_SREGS2) / in (KVM_SET_SREGS2) */
+ struct kvm_segment cs, ds, es, fs, gs, ss;
+ struct kvm_segment tr, ldt;
+ struct kvm_dtable gdt, idt;
+ __u64 cr0, cr2, cr3, cr4, cr8;
+ __u64 efer;
+ __u64 apic_base;
+ __u64 flags;
+ __u64 pdptrs[4];
+};
+#define KVM_SREGS2_FLAGS_PDPTRS_VALID 1
+
/* for KVM_GET_FPU and KVM_SET_FPU */
struct kvm_fpu {
__u8 fpr[8][16];
@@ -282,6 +295,7 @@
#define KVM_GUESTDBG_USE_HW_BP 0x00020000
#define KVM_GUESTDBG_INJECT_DB 0x00040000
#define KVM_GUESTDBG_INJECT_BP 0x00080000
+#define KVM_GUESTDBG_BLOCKIRQ 0x00100000
/* for KVM_SET_GUEST_DEBUG */
struct kvm_guest_debug_arch {
@@ -359,9 +373,23 @@
__u64 reserved[9];
};
-/* for KVM_CAP_XSAVE */
+/* for KVM_CAP_XSAVE and KVM_CAP_XSAVE2 */
struct kvm_xsave {
+ /*
+ * KVM_GET_XSAVE2 and KVM_SET_XSAVE write and read as many bytes
+ * as are returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2)
+ * respectively, when invoked on the vm file descriptor.
+ *
+ * The size value returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2)
+ * will always be at least 4096. Currently, it is only greater
+ * than 4096 if a dynamic feature has been enabled with
+ * ``arch_prctl()``, but this may change in the future.
+ *
+ * The offsets of the state save areas in struct kvm_xsave follow
+ * the contents of CPUID leaf 0xD on the host.
+ */
__u32 region[1024];
+ __u32 extra[0];
};
#define KVM_MAX_XCRS 16
@@ -424,6 +452,9 @@
#define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE 0x00000001
+/* attributes for system fd (group 0) */
+#define KVM_X86_XCOMP_GUEST_SUPP 0
+
struct kvm_vmx_nested_state_data {
__u8 vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
__u8 shadow_vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE];
@@ -437,6 +468,8 @@
__u16 flags;
} smm;
+ __u16 pad;
+
__u32 flags;
__u64 preemption_timer_deadline;
};
@@ -488,4 +521,8 @@
#define KVM_PMU_EVENT_ALLOW 0
#define KVM_PMU_EVENT_DENY 1
+/* for KVM_{GET,SET,HAS}_DEVICE_ATTR */
+#define KVM_VCPU_TSC_CTRL 0 /* control group for the timestamp counter (TSC) */
+#define KVM_VCPU_TSC_OFFSET 0 /* attribute for the TSC offset */
+
#endif /* _ASM_X86_KVM_H */
diff --git a/original/uapi/asm-x86/asm/kvm_para.h b/original/uapi/asm-x86/asm/kvm_para.h
index 950afeb..6e64b27 100644
--- a/original/uapi/asm-x86/asm/kvm_para.h
+++ b/original/uapi/asm-x86/asm/kvm_para.h
@@ -8,6 +8,7 @@
* should be used to determine that a VM is running under KVM.
*/
#define KVM_CPUID_SIGNATURE 0x40000000
+#define KVM_SIGNATURE "KVMKVMKVM\0\0\0"
/* This CPUID returns two feature bitmaps in eax, edx. Before enabling
* a particular paravirtualization, the appropriate feature bit should
@@ -33,6 +34,8 @@
#define KVM_FEATURE_PV_SCHED_YIELD 13
#define KVM_FEATURE_ASYNC_PF_INT 14
#define KVM_FEATURE_MSI_EXT_DEST_ID 15
+#define KVM_FEATURE_HC_MAP_GPA_RANGE 16
+#define KVM_FEATURE_MIGRATION_CONTROL 17
#define KVM_HINTS_REALTIME 0
@@ -54,6 +57,7 @@
#define MSR_KVM_POLL_CONTROL 0x4b564d05
#define MSR_KVM_ASYNC_PF_INT 0x4b564d06
#define MSR_KVM_ASYNC_PF_ACK 0x4b564d07
+#define MSR_KVM_MIGRATION_CONTROL 0x4b564d08
struct kvm_steal_time {
__u64 steal;
@@ -90,6 +94,16 @@
/* MSR_KVM_ASYNC_PF_INT */
#define KVM_ASYNC_PF_VEC_MASK GENMASK(7, 0)
+/* MSR_KVM_MIGRATION_CONTROL */
+#define KVM_MIGRATION_READY (1 << 0)
+
+/* KVM_HC_MAP_GPA_RANGE */
+#define KVM_MAP_GPA_RANGE_PAGE_SZ_4K 0
+#define KVM_MAP_GPA_RANGE_PAGE_SZ_2M (1 << 0)
+#define KVM_MAP_GPA_RANGE_PAGE_SZ_1G (1 << 1)
+#define KVM_MAP_GPA_RANGE_ENC_STAT(n) (n << 4)
+#define KVM_MAP_GPA_RANGE_ENCRYPTED KVM_MAP_GPA_RANGE_ENC_STAT(1)
+#define KVM_MAP_GPA_RANGE_DECRYPTED KVM_MAP_GPA_RANGE_ENC_STAT(0)
/* Operations for KVM_HC_MMU_OP */
#define KVM_MMU_OP_WRITE_PTE 1
diff --git a/original/uapi/asm-x86/asm/msgbuf.h b/original/uapi/asm-x86/asm/msgbuf.h
index b3d0664..ac83e25 100644
--- a/original/uapi/asm-x86/asm/msgbuf.h
+++ b/original/uapi/asm-x86/asm/msgbuf.h
@@ -12,7 +12,7 @@
* The msqid64_ds structure for x86 architecture with x32 ABI.
*
* On x86-32 and x86-64 we can just use the generic definition, but
- * x32 uses the same binary layout as x86_64, which is differnet
+ * x32 uses the same binary layout as x86_64, which is different
* from other 32-bit architectures.
*/
diff --git a/original/uapi/asm-x86/asm/prctl.h b/original/uapi/asm-x86/asm/prctl.h
index 5a6aac9..500b96e 100644
--- a/original/uapi/asm-x86/asm/prctl.h
+++ b/original/uapi/asm-x86/asm/prctl.h
@@ -2,16 +2,22 @@
#ifndef _ASM_X86_PRCTL_H
#define _ASM_X86_PRCTL_H
-#define ARCH_SET_GS 0x1001
-#define ARCH_SET_FS 0x1002
-#define ARCH_GET_FS 0x1003
-#define ARCH_GET_GS 0x1004
+#define ARCH_SET_GS 0x1001
+#define ARCH_SET_FS 0x1002
+#define ARCH_GET_FS 0x1003
+#define ARCH_GET_GS 0x1004
-#define ARCH_GET_CPUID 0x1011
-#define ARCH_SET_CPUID 0x1012
+#define ARCH_GET_CPUID 0x1011
+#define ARCH_SET_CPUID 0x1012
-#define ARCH_MAP_VDSO_X32 0x2001
-#define ARCH_MAP_VDSO_32 0x2002
-#define ARCH_MAP_VDSO_64 0x2003
+#define ARCH_GET_XCOMP_SUPP 0x1021
+#define ARCH_GET_XCOMP_PERM 0x1022
+#define ARCH_REQ_XCOMP_PERM 0x1023
+#define ARCH_GET_XCOMP_GUEST_PERM 0x1024
+#define ARCH_REQ_XCOMP_GUEST_PERM 0x1025
+
+#define ARCH_MAP_VDSO_X32 0x2001
+#define ARCH_MAP_VDSO_32 0x2002
+#define ARCH_MAP_VDSO_64 0x2003
#endif /* _ASM_X86_PRCTL_H */
diff --git a/original/uapi/asm-x86/asm/sgx.h b/original/uapi/asm-x86/asm/sgx.h
index 9034f30..f4b8158 100644
--- a/original/uapi/asm-x86/asm/sgx.h
+++ b/original/uapi/asm-x86/asm/sgx.h
@@ -27,6 +27,8 @@
_IOW(SGX_MAGIC, 0x02, struct sgx_enclave_init)
#define SGX_IOC_ENCLAVE_PROVISION \
_IOW(SGX_MAGIC, 0x03, struct sgx_enclave_provision)
+#define SGX_IOC_VEPC_REMOVE_ALL \
+ _IO(SGX_MAGIC, 0x04)
/**
* struct sgx_enclave_create - parameter structure for the
@@ -152,7 +154,7 @@
* Most exceptions reported on ENCLU, including those that occur within the
* enclave, are fixed up and reported synchronously instead of being delivered
* via a standard signal. Debug Exceptions (#DB) and Breakpoints (#BP) are
- * never fixed up and are always delivered via standard signals. On synchrously
+ * never fixed up and are always delivered via standard signals. On synchronously
* reported exceptions, -EFAULT is returned and details about the exception are
* recorded in @run.exception, the optional sgx_enclave_exception struct.
*
diff --git a/original/uapi/asm-x86/asm/shmbuf.h b/original/uapi/asm-x86/asm/shmbuf.h
index f0305dc..fce18ea 100644
--- a/original/uapi/asm-x86/asm/shmbuf.h
+++ b/original/uapi/asm-x86/asm/shmbuf.h
@@ -9,7 +9,7 @@
* The shmid64_ds structure for x86 architecture with x32 ABI.
*
* On x86-32 and x86-64 we can just use the generic definition, but
- * x32 uses the same binary layout as x86_64, which is differnet
+ * x32 uses the same binary layout as x86_64, which is different
* from other 32-bit architectures.
*/
diff --git a/original/uapi/asm-x86/asm/sigcontext.h b/original/uapi/asm-x86/asm/sigcontext.h
index 844d60e..d0d9b33 100644
--- a/original/uapi/asm-x86/asm/sigcontext.h
+++ b/original/uapi/asm-x86/asm/sigcontext.h
@@ -139,7 +139,7 @@
* The 64-bit FPU frame. (FXSAVE format and later)
*
* Note1: If sw_reserved.magic1 == FP_XSTATE_MAGIC1 then the structure is
- * larger: 'struct _xstate'. Note that 'struct _xstate' embedds
+ * larger: 'struct _xstate'. Note that 'struct _xstate' embeds
* 'struct _fpstate' so that you can always assume the _fpstate portion
* exists so that you can check the magic value.
*
diff --git a/original/uapi/asm-x86/asm/svm.h b/original/uapi/asm-x86/asm/svm.h
index 554f75f..efa9693 100644
--- a/original/uapi/asm-x86/asm/svm.h
+++ b/original/uapi/asm-x86/asm/svm.h
@@ -110,6 +110,9 @@
#define SVM_VMGEXIT_GET_AP_JUMP_TABLE 1
#define SVM_VMGEXIT_UNSUPPORTED_EVENT 0x8000ffff
+/* Exit code reserved for hypervisor/software use */
+#define SVM_EXIT_SW 0xf0000000
+
#define SVM_EXIT_ERR -1
#define SVM_EXIT_REASONS \
diff --git a/original/uapi/asm-x86/asm/unistd_32.h b/original/uapi/asm-x86/asm/unistd_32.h
index e3d32ca..3bdb80d 100644
--- a/original/uapi/asm-x86/asm/unistd_32.h
+++ b/original/uapi/asm-x86/asm/unistd_32.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_UNISTD_32_H
-#define _ASM_X86_UNISTD_32_H 1
+#ifndef _UAPI_ASM_UNISTD_32_H
+#define _UAPI_ASM_UNISTD_32_H
#define __NR_restart_syscall 0
#define __NR_exit 1
@@ -433,9 +433,17 @@
#define __NR_process_madvise 440
#define __NR_epoll_pwait2 441
#define __NR_mount_setattr 442
+#define __NR_quotactl_fd 443
+#define __NR_landlock_create_ruleset 444
+#define __NR_landlock_add_rule 445
+#define __NR_landlock_restrict_self 446
+#define __NR_memfd_secret 447
+#define __NR_process_mrelease 448
+#define __NR_futex_waitv 449
+#define __NR_set_mempolicy_home_node 450
#ifdef __KERNEL__
-#define __NR_syscall_max 442
+#define __NR_syscalls 451
#endif
-#endif /* _ASM_X86_UNISTD_32_H */
+#endif /* _UAPI_ASM_UNISTD_32_H */
diff --git a/original/uapi/asm-x86/asm/unistd_64.h b/original/uapi/asm-x86/asm/unistd_64.h
index ffbe094..a7689ee 100644
--- a/original/uapi/asm-x86/asm/unistd_64.h
+++ b/original/uapi/asm-x86/asm/unistd_64.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_UNISTD_64_H
-#define _ASM_X86_UNISTD_64_H 1
+#ifndef _UAPI_ASM_UNISTD_64_H
+#define _UAPI_ASM_UNISTD_64_H
#define __NR_read 0
#define __NR_write 1
@@ -355,9 +355,17 @@
#define __NR_process_madvise 440
#define __NR_epoll_pwait2 441
#define __NR_mount_setattr 442
+#define __NR_quotactl_fd 443
+#define __NR_landlock_create_ruleset 444
+#define __NR_landlock_add_rule 445
+#define __NR_landlock_restrict_self 446
+#define __NR_memfd_secret 447
+#define __NR_process_mrelease 448
+#define __NR_futex_waitv 449
+#define __NR_set_mempolicy_home_node 450
#ifdef __KERNEL__
-#define __NR_syscall_max 442
+#define __NR_syscalls 451
#endif
-#endif /* _ASM_X86_UNISTD_64_H */
+#endif /* _UAPI_ASM_UNISTD_64_H */
diff --git a/original/uapi/asm-x86/asm/unistd_x32.h b/original/uapi/asm-x86/asm/unistd_x32.h
index 7b7ee98..700514e 100644
--- a/original/uapi/asm-x86/asm/unistd_x32.h
+++ b/original/uapi/asm-x86/asm/unistd_x32.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_UNISTD_X32_H
-#define _ASM_X86_UNISTD_X32_H 1
+#ifndef _UAPI_ASM_UNISTD_X32_H
+#define _UAPI_ASM_UNISTD_X32_H
#define __NR_read (__X32_SYSCALL_BIT + 0)
#define __NR_write (__X32_SYSCALL_BIT + 1)
@@ -308,6 +308,14 @@
#define __NR_process_madvise (__X32_SYSCALL_BIT + 440)
#define __NR_epoll_pwait2 (__X32_SYSCALL_BIT + 441)
#define __NR_mount_setattr (__X32_SYSCALL_BIT + 442)
+#define __NR_quotactl_fd (__X32_SYSCALL_BIT + 443)
+#define __NR_landlock_create_ruleset (__X32_SYSCALL_BIT + 444)
+#define __NR_landlock_add_rule (__X32_SYSCALL_BIT + 445)
+#define __NR_landlock_restrict_self (__X32_SYSCALL_BIT + 446)
+#define __NR_memfd_secret (__X32_SYSCALL_BIT + 447)
+#define __NR_process_mrelease (__X32_SYSCALL_BIT + 448)
+#define __NR_futex_waitv (__X32_SYSCALL_BIT + 449)
+#define __NR_set_mempolicy_home_node (__X32_SYSCALL_BIT + 450)
#define __NR_rt_sigaction (__X32_SYSCALL_BIT + 512)
#define __NR_rt_sigreturn (__X32_SYSCALL_BIT + 513)
#define __NR_ioctl (__X32_SYSCALL_BIT + 514)
@@ -346,7 +354,7 @@
#define __NR_pwritev2 (__X32_SYSCALL_BIT + 547)
#ifdef __KERNEL__
-#define __NR_syscall_max 547
+#define __NR_syscalls 548
#endif
-#endif /* _ASM_X86_UNISTD_X32_H */
+#endif /* _UAPI_ASM_UNISTD_X32_H */
diff --git a/original/uapi/asm-x86/asm/vmx.h b/original/uapi/asm-x86/asm/vmx.h
index b8e650a..946d761 100644
--- a/original/uapi/asm-x86/asm/vmx.h
+++ b/original/uapi/asm-x86/asm/vmx.h
@@ -27,6 +27,7 @@
#define VMX_EXIT_REASONS_FAILED_VMENTRY 0x80000000
+#define VMX_EXIT_REASONS_SGX_ENCLAVE_MODE 0x08000000
#define EXIT_REASON_EXCEPTION_NMI 0
#define EXIT_REASON_EXTERNAL_INTERRUPT 1
diff --git a/original/uapi/drm/amdgpu_drm.h b/original/uapi/drm/amdgpu_drm.h
index 7fb9c09..0b94ec7 100644
--- a/original/uapi/drm/amdgpu_drm.h
+++ b/original/uapi/drm/amdgpu_drm.h
@@ -80,7 +80,7 @@
*
* %AMDGPU_GEM_DOMAIN_GTT GPU accessible system memory, mapped into the
* GPU's virtual address space via gart. Gart memory linearizes non-contiguous
- * pages of system memory, allows GPU access system memory in a linezrized
+ * pages of system memory, allows GPU access system memory in a linearized
* fashion.
*
* %AMDGPU_GEM_DOMAIN_VRAM Local video memory. For APUs, it is memory
@@ -116,8 +116,6 @@
#define AMDGPU_GEM_CREATE_CPU_GTT_USWC (1 << 2)
/* Flag that the memory should be in VRAM and cleared */
#define AMDGPU_GEM_CREATE_VRAM_CLEARED (1 << 3)
-/* Flag that create shadow bo(GTT) while allocating vram bo */
-#define AMDGPU_GEM_CREATE_SHADOW (1 << 4)
/* Flag that allocating the BO should use linear VRAM */
#define AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS (1 << 5)
/* Flag that BO is always valid in this VM */
@@ -138,6 +136,10 @@
* accessing it with various hw blocks
*/
#define AMDGPU_GEM_CREATE_ENCRYPTED (1 << 10)
+/* Flag that BO will be used only in preemptible context, which does
+ * not require GTT memory accounting
+ */
+#define AMDGPU_GEM_CREATE_PREEMPTIBLE (1 << 11)
struct drm_amdgpu_gem_create_in {
/** the requested memory size */
@@ -755,6 +757,8 @@
#define AMDGPU_INFO_VBIOS_SIZE 0x1
/* Subquery id: Query vbios image */
#define AMDGPU_INFO_VBIOS_IMAGE 0x2
+ /* Subquery id: Query vbios info */
+ #define AMDGPU_INFO_VBIOS_INFO 0x3
/* Query UVD handles */
#define AMDGPU_INFO_NUM_HANDLES 0x1C
/* Query sensor related information */
@@ -782,7 +786,6 @@
#define AMDGPU_INFO_VRAM_LOST_COUNTER 0x1F
/* query ras mask of enabled features*/
#define AMDGPU_INFO_RAS_ENABLED_FEATURES 0x20
-
/* RAS MASK: UMC (VRAM) */
#define AMDGPU_INFO_RAS_ENABLED_UMC (1 << 0)
/* RAS MASK: SDMA */
@@ -811,6 +814,12 @@
#define AMDGPU_INFO_RAS_ENABLED_MP1 (1 << 12)
/* RAS MASK: FUSE */
#define AMDGPU_INFO_RAS_ENABLED_FUSE (1 << 13)
+/* query video encode/decode caps */
+#define AMDGPU_INFO_VIDEO_CAPS 0x21
+ /* Subquery id: Decode */
+ #define AMDGPU_INFO_VIDEO_CAPS_DECODE 0
+ /* Subquery id: Encode */
+ #define AMDGPU_INFO_VIDEO_CAPS_ENCODE 1
#define AMDGPU_INFO_MMR_SE_INDEX_SHIFT 0
#define AMDGPU_INFO_MMR_SE_INDEX_MASK 0xff
@@ -878,6 +887,10 @@
struct {
__u32 type;
} sensor_info;
+
+ struct {
+ __u32 type;
+ } video_cap;
};
};
@@ -938,6 +951,15 @@
__u32 feature;
};
+struct drm_amdgpu_info_vbios {
+ __u8 name[64];
+ __u8 vbios_pn[64];
+ __u32 version;
+ __u32 pad;
+ __u8 vbios_ver_str[32];
+ __u8 date[32];
+};
+
#define AMDGPU_VRAM_TYPE_UNKNOWN 0
#define AMDGPU_VRAM_TYPE_GDDR1 1
#define AMDGPU_VRAM_TYPE_DDR2 2
@@ -1074,6 +1096,30 @@
__u32 pad;
};
+/* query video encode/decode caps */
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2 0
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4 1
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1 2
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC 3
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC 4
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG 5
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9 6
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1 7
+#define AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_COUNT 8
+
+struct drm_amdgpu_info_video_codec_info {
+ __u32 valid;
+ __u32 max_width;
+ __u32 max_height;
+ __u32 max_pixels_per_frame;
+ __u32 max_level;
+ __u32 pad;
+};
+
+struct drm_amdgpu_info_video_caps {
+ struct drm_amdgpu_info_video_codec_info codec_info[AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_COUNT];
+};
+
/*
* Supported GPU families
*/
@@ -1087,6 +1133,7 @@
#define AMDGPU_FAMILY_RV 142 /* Raven */
#define AMDGPU_FAMILY_NV 143 /* Navi10 */
#define AMDGPU_FAMILY_VGH 144 /* Van Gogh */
+#define AMDGPU_FAMILY_YC 146 /* Yellow Carp */
#if defined(__cplusplus)
}
diff --git a/original/uapi/drm/drm.h b/original/uapi/drm/drm.h
index 0827037..6428085 100644
--- a/original/uapi/drm/drm.h
+++ b/original/uapi/drm/drm.h
@@ -625,30 +625,147 @@
__u64 size;
};
+/**
+ * DRM_CAP_DUMB_BUFFER
+ *
+ * If set to 1, the driver supports creating dumb buffers via the
+ * &DRM_IOCTL_MODE_CREATE_DUMB ioctl.
+ */
#define DRM_CAP_DUMB_BUFFER 0x1
+/**
+ * DRM_CAP_VBLANK_HIGH_CRTC
+ *
+ * If set to 1, the kernel supports specifying a :ref:`CRTC index<crtc_index>`
+ * in the high bits of &drm_wait_vblank_request.type.
+ *
+ * Starting kernel version 2.6.39, this capability is always set to 1.
+ */
#define DRM_CAP_VBLANK_HIGH_CRTC 0x2
+/**
+ * DRM_CAP_DUMB_PREFERRED_DEPTH
+ *
+ * The preferred bit depth for dumb buffers.
+ *
+ * The bit depth is the number of bits used to indicate the color of a single
+ * pixel excluding any padding. This is different from the number of bits per
+ * pixel. For instance, XRGB8888 has a bit depth of 24 but has 32 bits per
+ * pixel.
+ *
+ * Note that this preference only applies to dumb buffers, it's irrelevant for
+ * other types of buffers.
+ */
#define DRM_CAP_DUMB_PREFERRED_DEPTH 0x3
+/**
+ * DRM_CAP_DUMB_PREFER_SHADOW
+ *
+ * If set to 1, the driver prefers userspace to render to a shadow buffer
+ * instead of directly rendering to a dumb buffer. For best speed, userspace
+ * should do streaming ordered memory copies into the dumb buffer and never
+ * read from it.
+ *
+ * Note that this preference only applies to dumb buffers, it's irrelevant for
+ * other types of buffers.
+ */
#define DRM_CAP_DUMB_PREFER_SHADOW 0x4
+/**
+ * DRM_CAP_PRIME
+ *
+ * Bitfield of supported PRIME sharing capabilities. See &DRM_PRIME_CAP_IMPORT
+ * and &DRM_PRIME_CAP_EXPORT.
+ *
+ * PRIME buffers are exposed as dma-buf file descriptors. See
+ * Documentation/gpu/drm-mm.rst, section "PRIME Buffer Sharing".
+ */
#define DRM_CAP_PRIME 0x5
+/**
+ * DRM_PRIME_CAP_IMPORT
+ *
+ * If this bit is set in &DRM_CAP_PRIME, the driver supports importing PRIME
+ * buffers via the &DRM_IOCTL_PRIME_FD_TO_HANDLE ioctl.
+ */
#define DRM_PRIME_CAP_IMPORT 0x1
+/**
+ * DRM_PRIME_CAP_EXPORT
+ *
+ * If this bit is set in &DRM_CAP_PRIME, the driver supports exporting PRIME
+ * buffers via the &DRM_IOCTL_PRIME_HANDLE_TO_FD ioctl.
+ */
#define DRM_PRIME_CAP_EXPORT 0x2
+/**
+ * DRM_CAP_TIMESTAMP_MONOTONIC
+ *
+ * If set to 0, the kernel will report timestamps with ``CLOCK_REALTIME`` in
+ * struct drm_event_vblank. If set to 1, the kernel will report timestamps with
+ * ``CLOCK_MONOTONIC``. See ``clock_gettime(2)`` for the definition of these
+ * clocks.
+ *
+ * Starting from kernel version 2.6.39, the default value for this capability
+ * is 1. Starting kernel version 4.15, this capability is always set to 1.
+ */
#define DRM_CAP_TIMESTAMP_MONOTONIC 0x6
+/**
+ * DRM_CAP_ASYNC_PAGE_FLIP
+ *
+ * If set to 1, the driver supports &DRM_MODE_PAGE_FLIP_ASYNC.
+ */
#define DRM_CAP_ASYNC_PAGE_FLIP 0x7
-/*
- * The CURSOR_WIDTH and CURSOR_HEIGHT capabilities return a valid widthxheight
- * combination for the hardware cursor. The intention is that a hardware
- * agnostic userspace can query a cursor plane size to use.
+/**
+ * DRM_CAP_CURSOR_WIDTH
+ *
+ * The ``CURSOR_WIDTH`` and ``CURSOR_HEIGHT`` capabilities return a valid
+ * width x height combination for the hardware cursor. The intention is that a
+ * hardware agnostic userspace can query a cursor plane size to use.
*
* Note that the cross-driver contract is to merely return a valid size;
* drivers are free to attach another meaning on top, eg. i915 returns the
* maximum plane size.
*/
#define DRM_CAP_CURSOR_WIDTH 0x8
+/**
+ * DRM_CAP_CURSOR_HEIGHT
+ *
+ * See &DRM_CAP_CURSOR_WIDTH.
+ */
#define DRM_CAP_CURSOR_HEIGHT 0x9
+/**
+ * DRM_CAP_ADDFB2_MODIFIERS
+ *
+ * If set to 1, the driver supports supplying modifiers in the
+ * &DRM_IOCTL_MODE_ADDFB2 ioctl.
+ */
#define DRM_CAP_ADDFB2_MODIFIERS 0x10
+/**
+ * DRM_CAP_PAGE_FLIP_TARGET
+ *
+ * If set to 1, the driver supports the &DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE and
+ * &DRM_MODE_PAGE_FLIP_TARGET_RELATIVE flags in
+ * &drm_mode_crtc_page_flip_target.flags for the &DRM_IOCTL_MODE_PAGE_FLIP
+ * ioctl.
+ */
#define DRM_CAP_PAGE_FLIP_TARGET 0x11
+/**
+ * DRM_CAP_CRTC_IN_VBLANK_EVENT
+ *
+ * If set to 1, the kernel supports reporting the CRTC ID in
+ * &drm_event_vblank.crtc_id for the &DRM_EVENT_VBLANK and
+ * &DRM_EVENT_FLIP_COMPLETE events.
+ *
+ * Starting kernel version 4.12, this capability is always set to 1.
+ */
#define DRM_CAP_CRTC_IN_VBLANK_EVENT 0x12
+/**
+ * DRM_CAP_SYNCOBJ
+ *
+ * If set to 1, the driver supports sync objects. See
+ * Documentation/gpu/drm-mm.rst, section "DRM Sync Objects".
+ */
#define DRM_CAP_SYNCOBJ 0x13
+/**
+ * DRM_CAP_SYNCOBJ_TIMELINE
+ *
+ * If set to 1, the driver supports timeline operations on sync objects. See
+ * Documentation/gpu/drm-mm.rst, section "DRM Sync Objects".
+ */
#define DRM_CAP_SYNCOBJ_TIMELINE 0x14
/* DRM_IOCTL_GET_CAP ioctl argument type */
@@ -660,9 +777,12 @@
/**
* DRM_CLIENT_CAP_STEREO_3D
*
- * if set to 1, the DRM core will expose the stereo 3D capabilities of the
+ * If set to 1, the DRM core will expose the stereo 3D capabilities of the
* monitor by advertising the supported 3D layouts in the flags of struct
- * drm_mode_modeinfo.
+ * drm_mode_modeinfo. See ``DRM_MODE_FLAG_3D_*``.
+ *
+ * This capability is always supported for all drivers starting from kernel
+ * version 3.13.
*/
#define DRM_CLIENT_CAP_STEREO_3D 1
@@ -671,6 +791,9 @@
*
* If set to 1, the DRM core will expose all planes (overlay, primary, and
* cursor) to userspace.
+ *
+ * This capability has been introduced in kernel version 3.15. Starting from
+ * kernel version 3.17, this capability is always supported for all drivers.
*/
#define DRM_CLIENT_CAP_UNIVERSAL_PLANES 2
@@ -680,6 +803,13 @@
* If set to 1, the DRM core will expose atomic properties to userspace. This
* implicitly enables &DRM_CLIENT_CAP_UNIVERSAL_PLANES and
* &DRM_CLIENT_CAP_ASPECT_RATIO.
+ *
+ * If the driver doesn't support atomic mode-setting, enabling this capability
+ * will fail with -EOPNOTSUPP.
+ *
+ * This capability has been introduced in kernel version 4.0. Starting from
+ * kernel version 4.2, this capability is always supported for atomic-capable
+ * drivers.
*/
#define DRM_CLIENT_CAP_ATOMIC 3
@@ -687,6 +817,10 @@
* DRM_CLIENT_CAP_ASPECT_RATIO
*
* If set to 1, the DRM core will provide aspect ratio information in modes.
+ * See ``DRM_MODE_FLAG_PIC_AR_*``.
+ *
+ * This capability is always supported for all drivers starting from kernel
+ * version 4.18.
*/
#define DRM_CLIENT_CAP_ASPECT_RATIO 4
@@ -694,8 +828,11 @@
* DRM_CLIENT_CAP_WRITEBACK_CONNECTORS
*
* If set to 1, the DRM core will expose special connectors to be used for
- * writing back to memory the scene setup in the commit. Depends on client
- * also supporting DRM_CLIENT_CAP_ATOMIC
+ * writing back to memory the scene setup in the commit. The client must enable
+ * &DRM_CLIENT_CAP_ATOMIC first.
+ *
+ * This capability is always supported for atomic-capable drivers starting from
+ * kernel version 4.19.
*/
#define DRM_CLIENT_CAP_WRITEBACK_CONNECTORS 5
@@ -913,6 +1050,16 @@
#define DRM_IOCTL_MODE_GETPROPBLOB DRM_IOWR(0xAC, struct drm_mode_get_blob)
#define DRM_IOCTL_MODE_GETFB DRM_IOWR(0xAD, struct drm_mode_fb_cmd)
#define DRM_IOCTL_MODE_ADDFB DRM_IOWR(0xAE, struct drm_mode_fb_cmd)
+/**
+ * DRM_IOCTL_MODE_RMFB - Remove a framebuffer.
+ *
+ * This removes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL
+ * argument is a framebuffer object ID.
+ *
+ * Warning: removing a framebuffer currently in-use on an enabled plane will
+ * disable that plane. The CRTC the plane is linked to may also be disabled
+ * (depending on driver capabilities).
+ */
#define DRM_IOCTL_MODE_RMFB DRM_IOWR(0xAF, unsigned int)
#define DRM_IOCTL_MODE_PAGE_FLIP DRM_IOWR(0xB0, struct drm_mode_crtc_page_flip)
#define DRM_IOCTL_MODE_DIRTYFB DRM_IOWR(0xB1, struct drm_mode_fb_dirty_cmd)
@@ -949,6 +1096,24 @@
#define DRM_IOCTL_SYNCOBJ_TRANSFER DRM_IOWR(0xCC, struct drm_syncobj_transfer)
#define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL DRM_IOWR(0xCD, struct drm_syncobj_timeline_array)
+/**
+ * DRM_IOCTL_MODE_GETFB2 - Get framebuffer metadata.
+ *
+ * This queries metadata about a framebuffer. User-space fills
+ * &drm_mode_fb_cmd2.fb_id as the input, and the kernels fills the rest of the
+ * struct as the output.
+ *
+ * If the client is DRM master or has &CAP_SYS_ADMIN, &drm_mode_fb_cmd2.handles
+ * will be filled with GEM buffer handles. Planes are valid until one has a
+ * zero handle -- this can be used to compute the number of planes.
+ *
+ * Otherwise, &drm_mode_fb_cmd2.handles will be zeroed and planes are valid
+ * until one has a zero &drm_mode_fb_cmd2.pitches.
+ *
+ * If the framebuffer has a format modifier, &DRM_MODE_FB_MODIFIERS will be set
+ * in &drm_mode_fb_cmd2.flags and &drm_mode_fb_cmd2.modifier will contain the
+ * modifier. Otherwise, user-space must ignore &drm_mode_fb_cmd2.modifier.
+ */
#define DRM_IOCTL_MODE_GETFB2 DRM_IOWR(0xCE, struct drm_mode_fb_cmd2)
/*
diff --git a/original/uapi/drm/drm_fourcc.h b/original/uapi/drm/drm_fourcc.h
index f76de49..fc0c145 100644
--- a/original/uapi/drm/drm_fourcc.h
+++ b/original/uapi/drm/drm_fourcc.h
@@ -104,6 +104,12 @@
/* 8 bpp Red */
#define DRM_FORMAT_R8 fourcc_code('R', '8', ' ', ' ') /* [7:0] R */
+/* 10 bpp Red */
+#define DRM_FORMAT_R10 fourcc_code('R', '1', '0', ' ') /* [15:0] x:R 6:10 little endian */
+
+/* 12 bpp Red */
+#define DRM_FORMAT_R12 fourcc_code('R', '1', '2', ' ') /* [15:0] x:R 4:12 little endian */
+
/* 16 bpp Red */
#define DRM_FORMAT_R16 fourcc_code('R', '1', '6', ' ') /* [15:0] R little endian */
@@ -168,6 +174,13 @@
#define DRM_FORMAT_RGBA1010102 fourcc_code('R', 'A', '3', '0') /* [31:0] R:G:B:A 10:10:10:2 little endian */
#define DRM_FORMAT_BGRA1010102 fourcc_code('B', 'A', '3', '0') /* [31:0] B:G:R:A 10:10:10:2 little endian */
+/* 64 bpp RGB */
+#define DRM_FORMAT_XRGB16161616 fourcc_code('X', 'R', '4', '8') /* [63:0] x:R:G:B 16:16:16:16 little endian */
+#define DRM_FORMAT_XBGR16161616 fourcc_code('X', 'B', '4', '8') /* [63:0] x:B:G:R 16:16:16:16 little endian */
+
+#define DRM_FORMAT_ARGB16161616 fourcc_code('A', 'R', '4', '8') /* [63:0] A:R:G:B 16:16:16:16 little endian */
+#define DRM_FORMAT_ABGR16161616 fourcc_code('A', 'B', '4', '8') /* [63:0] A:B:G:R 16:16:16:16 little endian */
+
/*
* Floating point 64bpp RGB
* IEEE 754-2008 binary16 half-precision float
@@ -301,6 +314,13 @@
*/
#define DRM_FORMAT_P016 fourcc_code('P', '0', '1', '6') /* 2x2 subsampled Cr:Cb plane 16 bits per channel */
+/* 2 plane YCbCr420.
+ * 3 10 bit components and 2 padding bits packed into 4 bytes.
+ * index 0 = Y plane, [31:0] x:Y2:Y1:Y0 2:10:10:10 little endian
+ * index 1 = Cr:Cb plane, [63:0] x:Cr2:Cb2:Cr1:x:Cb1:Cr0:Cb0 [2:10:10:10:2:10:10:10] little endian
+ */
+#define DRM_FORMAT_P030 fourcc_code('P', '0', '3', '0') /* 2x2 subsampled Cr:Cb plane 10 bits per channel packed */
+
/* 3 plane non-subsampled (444) YCbCr
* 16 bits per component, but only 10 bits are used and 6 bits are padded
* index 0: Y plane, [15:0] Y:x [10:6] little endian
@@ -366,6 +386,12 @@
#define DRM_FORMAT_RESERVED ((1ULL << 56) - 1)
+#define fourcc_mod_get_vendor(modifier) \
+ (((modifier) >> 56) & 0xff)
+
+#define fourcc_mod_is_vendor(modifier, vendor) \
+ (fourcc_mod_get_vendor(modifier) == DRM_FORMAT_MOD_VENDOR_## vendor)
+
#define fourcc_mod_code(vendor, val) \
((((__u64)DRM_FORMAT_MOD_VENDOR_## vendor) << 56) | ((val) & 0x00ffffffffffffffULL))
@@ -835,6 +861,10 @@
* and UV. Some SAND-using hardware stores UV in a separate tiled
* image from Y to reduce the column height, which is not supported
* with these modifiers.
+ *
+ * The DRM_FORMAT_MOD_BROADCOM_SAND128_COL_HEIGHT modifier is also
+ * supported for DRM_FORMAT_P030 where the columns remain as 128 bytes
+ * wide, but as this is a 10 bpp format that translates to 96 pixels.
*/
#define DRM_FORMAT_MOD_BROADCOM_SAND32_COL_HEIGHT(v) \
@@ -893,9 +923,9 @@
/*
* The top 4 bits (out of the 56 bits alloted for specifying vendor specific
- * modifiers) denote the category for modifiers. Currently we have only two
- * categories of modifiers ie AFBC and MISC. We can have a maximum of sixteen
- * different categories.
+ * modifiers) denote the category for modifiers. Currently we have three
+ * categories of modifiers ie AFBC, MISC and AFRC. We can have a maximum of
+ * sixteen different categories.
*/
#define DRM_FORMAT_MOD_ARM_CODE(__type, __val) \
fourcc_mod_code(ARM, ((__u64)(__type) << 52) | ((__val) & 0x000fffffffffffffULL))
@@ -1011,6 +1041,109 @@
#define AFBC_FORMAT_MOD_USM (1ULL << 12)
/*
+ * Arm Fixed-Rate Compression (AFRC) modifiers
+ *
+ * AFRC is a proprietary fixed rate image compression protocol and format,
+ * designed to provide guaranteed bandwidth and memory footprint
+ * reductions in graphics and media use-cases.
+ *
+ * AFRC buffers consist of one or more planes, with the same components
+ * and meaning as an uncompressed buffer using the same pixel format.
+ *
+ * Within each plane, the pixel/luma/chroma values are grouped into
+ * "coding unit" blocks which are individually compressed to a
+ * fixed size (in bytes). All coding units within a given plane of a buffer
+ * store the same number of values, and have the same compressed size.
+ *
+ * The coding unit size is configurable, allowing different rates of compression.
+ *
+ * The start of each AFRC buffer plane must be aligned to an alignment granule which
+ * depends on the coding unit size.
+ *
+ * Coding Unit Size Plane Alignment
+ * ---------------- ---------------
+ * 16 bytes 1024 bytes
+ * 24 bytes 512 bytes
+ * 32 bytes 2048 bytes
+ *
+ * Coding units are grouped into paging tiles. AFRC buffer dimensions must be aligned
+ * to a multiple of the paging tile dimensions.
+ * The dimensions of each paging tile depend on whether the buffer is optimised for
+ * scanline (SCAN layout) or rotated (ROT layout) access.
+ *
+ * Layout Paging Tile Width Paging Tile Height
+ * ------ ----------------- ------------------
+ * SCAN 16 coding units 4 coding units
+ * ROT 8 coding units 8 coding units
+ *
+ * The dimensions of each coding unit depend on the number of components
+ * in the compressed plane and whether the buffer is optimised for
+ * scanline (SCAN layout) or rotated (ROT layout) access.
+ *
+ * Number of Components in Plane Layout Coding Unit Width Coding Unit Height
+ * ----------------------------- --------- ----------------- ------------------
+ * 1 SCAN 16 samples 4 samples
+ * Example: 16x4 luma samples in a 'Y' plane
+ * 16x4 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer
+ * ----------------------------- --------- ----------------- ------------------
+ * 1 ROT 8 samples 8 samples
+ * Example: 8x8 luma samples in a 'Y' plane
+ * 8x8 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer
+ * ----------------------------- --------- ----------------- ------------------
+ * 2 DONT CARE 8 samples 4 samples
+ * Example: 8x4 chroma pairs in the 'UV' plane of a semi-planar YUV buffer
+ * ----------------------------- --------- ----------------- ------------------
+ * 3 DONT CARE 4 samples 4 samples
+ * Example: 4x4 pixels in an RGB buffer without alpha
+ * ----------------------------- --------- ----------------- ------------------
+ * 4 DONT CARE 4 samples 4 samples
+ * Example: 4x4 pixels in an RGB buffer with alpha
+ */
+
+#define DRM_FORMAT_MOD_ARM_TYPE_AFRC 0x02
+
+#define DRM_FORMAT_MOD_ARM_AFRC(__afrc_mode) \
+ DRM_FORMAT_MOD_ARM_CODE(DRM_FORMAT_MOD_ARM_TYPE_AFRC, __afrc_mode)
+
+/*
+ * AFRC coding unit size modifier.
+ *
+ * Indicates the number of bytes used to store each compressed coding unit for
+ * one or more planes in an AFRC encoded buffer. The coding unit size for chrominance
+ * is the same for both Cb and Cr, which may be stored in separate planes.
+ *
+ * AFRC_FORMAT_MOD_CU_SIZE_P0 indicates the number of bytes used to store
+ * each compressed coding unit in the first plane of the buffer. For RGBA buffers
+ * this is the only plane, while for semi-planar and fully-planar YUV buffers,
+ * this corresponds to the luma plane.
+ *
+ * AFRC_FORMAT_MOD_CU_SIZE_P12 indicates the number of bytes used to store
+ * each compressed coding unit in the second and third planes in the buffer.
+ * For semi-planar and fully-planar YUV buffers, this corresponds to the chroma plane(s).
+ *
+ * For single-plane buffers, AFRC_FORMAT_MOD_CU_SIZE_P0 must be specified
+ * and AFRC_FORMAT_MOD_CU_SIZE_P12 must be zero.
+ * For semi-planar and fully-planar buffers, both AFRC_FORMAT_MOD_CU_SIZE_P0 and
+ * AFRC_FORMAT_MOD_CU_SIZE_P12 must be specified.
+ */
+#define AFRC_FORMAT_MOD_CU_SIZE_MASK 0xf
+#define AFRC_FORMAT_MOD_CU_SIZE_16 (1ULL)
+#define AFRC_FORMAT_MOD_CU_SIZE_24 (2ULL)
+#define AFRC_FORMAT_MOD_CU_SIZE_32 (3ULL)
+
+#define AFRC_FORMAT_MOD_CU_SIZE_P0(__afrc_cu_size) (__afrc_cu_size)
+#define AFRC_FORMAT_MOD_CU_SIZE_P12(__afrc_cu_size) ((__afrc_cu_size) << 4)
+
+/*
+ * AFRC scanline memory layout.
+ *
+ * Indicates if the buffer uses the scanline-optimised layout
+ * for an AFRC encoded buffer, otherwise, it uses the rotation-optimised layout.
+ * The memory layout is the same for all planes.
+ */
+#define AFRC_FORMAT_MOD_LAYOUT_SCAN (1ULL << 8)
+
+/*
* Arm 16x16 Block U-Interleaved modifier
*
* This is used by Arm Mali Utgard and Midgard GPUs. It divides the image
diff --git a/original/uapi/drm/drm_mode.h b/original/uapi/drm/drm_mode.h
index 1c06462..e1e3516 100644
--- a/original/uapi/drm/drm_mode.h
+++ b/original/uapi/drm/drm_mode.h
@@ -312,16 +312,48 @@
__u32 src_w;
};
+/**
+ * struct drm_mode_get_plane - Get plane metadata.
+ *
+ * Userspace can perform a GETPLANE ioctl to retrieve information about a
+ * plane.
+ *
+ * To retrieve the number of formats supported, set @count_format_types to zero
+ * and call the ioctl. @count_format_types will be updated with the value.
+ *
+ * To retrieve these formats, allocate an array with the memory needed to store
+ * @count_format_types formats. Point @format_type_ptr to this array and call
+ * the ioctl again (with @count_format_types still set to the value returned in
+ * the first ioctl call).
+ */
struct drm_mode_get_plane {
+ /**
+ * @plane_id: Object ID of the plane whose information should be
+ * retrieved. Set by caller.
+ */
__u32 plane_id;
+ /** @crtc_id: Object ID of the current CRTC. */
__u32 crtc_id;
+ /** @fb_id: Object ID of the current fb. */
__u32 fb_id;
+ /**
+ * @possible_crtcs: Bitmask of CRTC's compatible with the plane. CRTC's
+ * are created and they receive an index, which corresponds to their
+ * position in the bitmask. Bit N corresponds to
+ * :ref:`CRTC index<crtc_index>` N.
+ */
__u32 possible_crtcs;
+ /** @gamma_size: Never used. */
__u32 gamma_size;
+ /** @count_format_types: Number of formats. */
__u32 count_format_types;
+ /**
+ * @format_type_ptr: Pointer to ``__u32`` array of formats that are
+ * supported by the plane. These formats do not require modifiers.
+ */
__u64 format_type_ptr;
};
@@ -388,6 +420,7 @@
#define DRM_MODE_CONNECTOR_DPI 17
#define DRM_MODE_CONNECTOR_WRITEBACK 18
#define DRM_MODE_CONNECTOR_SPI 19
+#define DRM_MODE_CONNECTOR_USB 20
/**
* struct drm_mode_get_connector - Get connector metadata.
@@ -412,9 +445,10 @@
*
* **Force-probing a connector**
*
- * If the @count_modes field is set to zero, the kernel will perform a forced
- * probe on the connector to refresh the connector status, modes and EDID.
- * A forced-probe can be slow, might cause flickering and the ioctl will block.
+ * If the @count_modes field is set to zero and the DRM client is the current
+ * DRM master, the kernel will perform a forced probe on the connector to
+ * refresh the connector status, modes and EDID. A forced-probe can be slow,
+ * might cause flickering and the ioctl will block.
*
* User-space needs to force-probe connectors to ensure their metadata is
* up-to-date at startup and after receiving a hot-plug event. User-space
@@ -507,22 +541,74 @@
*/
#define DRM_MODE_PROP_ATOMIC 0x80000000
+/**
+ * struct drm_mode_property_enum - Description for an enum/bitfield entry.
+ * @value: numeric value for this enum entry.
+ * @name: symbolic name for this enum entry.
+ *
+ * See struct drm_property_enum for details.
+ */
struct drm_mode_property_enum {
__u64 value;
char name[DRM_PROP_NAME_LEN];
};
+/**
+ * struct drm_mode_get_property - Get property metadata.
+ *
+ * User-space can perform a GETPROPERTY ioctl to retrieve information about a
+ * property. The same property may be attached to multiple objects, see
+ * "Modeset Base Object Abstraction".
+ *
+ * The meaning of the @values_ptr field changes depending on the property type.
+ * See &drm_property.flags for more details.
+ *
+ * The @enum_blob_ptr and @count_enum_blobs fields are only meaningful when the
+ * property has the type &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK. For
+ * backwards compatibility, the kernel will always set @count_enum_blobs to
+ * zero when the property has the type &DRM_MODE_PROP_BLOB. User-space must
+ * ignore these two fields if the property has a different type.
+ *
+ * User-space is expected to retrieve values and enums by performing this ioctl
+ * at least twice: the first time to retrieve the number of elements, the
+ * second time to retrieve the elements themselves.
+ *
+ * To retrieve the number of elements, set @count_values and @count_enum_blobs
+ * to zero, then call the ioctl. @count_values will be updated with the number
+ * of elements. If the property has the type &DRM_MODE_PROP_ENUM or
+ * &DRM_MODE_PROP_BITMASK, @count_enum_blobs will be updated as well.
+ *
+ * To retrieve the elements themselves, allocate an array for @values_ptr and
+ * set @count_values to its capacity. If the property has the type
+ * &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK, allocate an array for
+ * @enum_blob_ptr and set @count_enum_blobs to its capacity. Calling the ioctl
+ * again will fill the arrays.
+ */
struct drm_mode_get_property {
- __u64 values_ptr; /* values and blob lengths */
- __u64 enum_blob_ptr; /* enum and blob id ptrs */
+ /** @values_ptr: Pointer to a ``__u64`` array. */
+ __u64 values_ptr;
+ /** @enum_blob_ptr: Pointer to a struct drm_mode_property_enum array. */
+ __u64 enum_blob_ptr;
+ /**
+ * @prop_id: Object ID of the property which should be retrieved. Set
+ * by the caller.
+ */
__u32 prop_id;
+ /**
+ * @flags: ``DRM_MODE_PROP_*`` bitfield. See &drm_property.flags for
+ * a definition of the flags.
+ */
__u32 flags;
+ /**
+ * @name: Symbolic property name. User-space should use this field to
+ * recognize properties.
+ */
char name[DRM_PROP_NAME_LEN];
+ /** @count_values: Number of elements in @values_ptr. */
__u32 count_values;
- /* This is only used to count enum values, not blobs. The _blobs is
- * simply because of a historical reason, i.e. backwards compat. */
+ /** @count_enum_blobs: Number of elements in @enum_blob_ptr. */
__u32 count_enum_blobs;
};
@@ -990,7 +1076,7 @@
};
/**
- * struct drm_mode_create_blob - Create New block property
+ * struct drm_mode_create_blob - Create New blob property
*
* Create a new 'blob' data property, copying length bytes from data pointer,
* and returning new blob ID.
@@ -1024,6 +1110,10 @@
* struct drm_mode_create_lease - Create lease
*
* Lease mode resources, creating another drm_master.
+ *
+ * The @object_ids array must reference at least one CRTC, one connector and
+ * one plane if &DRM_CLIENT_CAP_UNIVERSAL_PLANES is enabled. Alternatively,
+ * the lease can be completely empty.
*/
struct drm_mode_create_lease {
/** @object_ids: Pointer to array of object ids (__u32) */
diff --git a/original/uapi/drm/etnaviv_drm.h b/original/uapi/drm/etnaviv_drm.h
index 09d0df8..af024d9 100644
--- a/original/uapi/drm/etnaviv_drm.h
+++ b/original/uapi/drm/etnaviv_drm.h
@@ -74,6 +74,9 @@
#define ETNAVIV_PARAM_GPU_NUM_CONSTANTS 0x19
#define ETNAVIV_PARAM_GPU_NUM_VARYINGS 0x1a
#define ETNAVIV_PARAM_SOFTPIN_START_ADDR 0x1b
+#define ETNAVIV_PARAM_GPU_PRODUCT_ID 0x1c
+#define ETNAVIV_PARAM_GPU_CUSTOMER_ID 0x1d
+#define ETNAVIV_PARAM_GPU_ECO_ID 0x1e
#define ETNA_MAX_PIPES 4
diff --git a/original/uapi/drm/i915_drm.h b/original/uapi/drm/i915_drm.h
index 1987e2e..914ebd9 100644
--- a/original/uapi/drm/i915_drm.h
+++ b/original/uapi/drm/i915_drm.h
@@ -62,8 +62,8 @@
#define I915_ERROR_UEVENT "ERROR"
#define I915_RESET_UEVENT "RESET"
-/*
- * i915_user_extension: Base class for defining a chain of extensions
+/**
+ * struct i915_user_extension - Base class for defining a chain of extensions
*
* Many interfaces need to grow over time. In most cases we can simply
* extend the struct and have userspace pass in more data. Another option,
@@ -76,12 +76,58 @@
* increasing complexity, and for large parts of that interface to be
* entirely optional. The downside is more pointer chasing; chasing across
* the __user boundary with pointers encapsulated inside u64.
+ *
+ * Example chaining:
+ *
+ * .. code-block:: C
+ *
+ * struct i915_user_extension ext3 {
+ * .next_extension = 0, // end
+ * .name = ...,
+ * };
+ * struct i915_user_extension ext2 {
+ * .next_extension = (uintptr_t)&ext3,
+ * .name = ...,
+ * };
+ * struct i915_user_extension ext1 {
+ * .next_extension = (uintptr_t)&ext2,
+ * .name = ...,
+ * };
+ *
+ * Typically the struct i915_user_extension would be embedded in some uAPI
+ * struct, and in this case we would feed it the head of the chain(i.e ext1),
+ * which would then apply all of the above extensions.
+ *
*/
struct i915_user_extension {
+ /**
+ * @next_extension:
+ *
+ * Pointer to the next struct i915_user_extension, or zero if the end.
+ */
__u64 next_extension;
+ /**
+ * @name: Name of the extension.
+ *
+ * Note that the name here is just some integer.
+ *
+ * Also note that the name space for this is not global for the whole
+ * driver, but rather its scope/meaning is limited to the specific piece
+ * of uAPI which has embedded the struct i915_user_extension.
+ */
__u32 name;
- __u32 flags; /* All undefined bits must be zero. */
- __u32 rsvd[4]; /* Reserved for future use; must be zero. */
+ /**
+ * @flags: MBZ
+ *
+ * All undefined bits must be zero.
+ */
+ __u32 flags;
+ /**
+ * @rsvd: MBZ
+ *
+ * Reserved for future use; must be zero.
+ */
+ __u32 rsvd[4];
};
/*
@@ -360,6 +406,7 @@
#define DRM_I915_QUERY 0x39
#define DRM_I915_GEM_VM_CREATE 0x3a
#define DRM_I915_GEM_VM_DESTROY 0x3b
+#define DRM_I915_GEM_CREATE_EXT 0x3c
/* Must be kept compact -- no holes */
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
@@ -392,6 +439,7 @@
#define DRM_IOCTL_I915_GEM_ENTERVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT)
#define DRM_IOCTL_I915_GEM_LEAVEVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT)
#define DRM_IOCTL_I915_GEM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE, struct drm_i915_gem_create)
+#define DRM_IOCTL_I915_GEM_CREATE_EXT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE_EXT, struct drm_i915_gem_create_ext)
#define DRM_IOCTL_I915_GEM_PREAD DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread)
#define DRM_IOCTL_I915_GEM_PWRITE DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite)
#define DRM_IOCTL_I915_GEM_MMAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap)
@@ -524,6 +572,15 @@
#define I915_SCHEDULER_CAP_PREEMPTION (1ul << 2)
#define I915_SCHEDULER_CAP_SEMAPHORES (1ul << 3)
#define I915_SCHEDULER_CAP_ENGINE_BUSY_STATS (1ul << 4)
+/*
+ * Indicates the 2k user priority levels are statically mapped into 3 buckets as
+ * follows:
+ *
+ * -1k to -1 Low priority
+ * 0 Normal priority
+ * 1 to 1k Highest priority
+ */
+#define I915_SCHEDULER_CAP_STATIC_PRIORITY_MAP (1ul << 5)
#define I915_PARAM_HUC_STATUS 42
@@ -626,6 +683,9 @@
*/
#define I915_PARAM_HAS_EXEC_TIMELINE_FENCES 55
+/* Query if the kernel supports the I915_USERPTR_PROBE flag. */
+#define I915_PARAM_HAS_USERPTR_PROBE 56
+
/* Must be kept compact -- no holes and well documented */
typedef struct drm_i915_getparam {
@@ -801,45 +861,113 @@
__u64 offset;
};
+/**
+ * struct drm_i915_gem_mmap_offset - Retrieve an offset so we can mmap this buffer object.
+ *
+ * This struct is passed as argument to the `DRM_IOCTL_I915_GEM_MMAP_OFFSET` ioctl,
+ * and is used to retrieve the fake offset to mmap an object specified by &handle.
+ *
+ * The legacy way of using `DRM_IOCTL_I915_GEM_MMAP` is removed on gen12+.
+ * `DRM_IOCTL_I915_GEM_MMAP_GTT` is an older supported alias to this struct, but will behave
+ * as setting the &extensions to 0, and &flags to `I915_MMAP_OFFSET_GTT`.
+ */
struct drm_i915_gem_mmap_offset {
- /** Handle for the object being mapped. */
+ /** @handle: Handle for the object being mapped. */
__u32 handle;
+ /** @pad: Must be zero */
__u32 pad;
/**
- * Fake offset to use for subsequent mmap call
+ * @offset: The fake offset to use for subsequent mmap call
*
* This is a fixed-size type for 32/64 compatibility.
*/
__u64 offset;
/**
- * Flags for extended behaviour.
+ * @flags: Flags for extended behaviour.
*
- * It is mandatory that one of the MMAP_OFFSET types
- * (GTT, WC, WB, UC, etc) should be included.
+ * It is mandatory that one of the `MMAP_OFFSET` types
+ * should be included:
+ *
+ * - `I915_MMAP_OFFSET_GTT`: Use mmap with the object bound to GTT. (Write-Combined)
+ * - `I915_MMAP_OFFSET_WC`: Use Write-Combined caching.
+ * - `I915_MMAP_OFFSET_WB`: Use Write-Back caching.
+ * - `I915_MMAP_OFFSET_FIXED`: Use object placement to determine caching.
+ *
+ * On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
+ * type. On devices without local memory, this caching mode is invalid.
+ *
+ * As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
+ * be used, depending on the object placement on creation. WB will be used
+ * when the object can only exist in system memory, WC otherwise.
*/
__u64 flags;
-#define I915_MMAP_OFFSET_GTT 0
-#define I915_MMAP_OFFSET_WC 1
-#define I915_MMAP_OFFSET_WB 2
-#define I915_MMAP_OFFSET_UC 3
- /*
- * Zero-terminated chain of extensions.
+#define I915_MMAP_OFFSET_GTT 0
+#define I915_MMAP_OFFSET_WC 1
+#define I915_MMAP_OFFSET_WB 2
+#define I915_MMAP_OFFSET_UC 3
+#define I915_MMAP_OFFSET_FIXED 4
+
+ /**
+ * @extensions: Zero-terminated chain of extensions.
*
* No current extensions defined; mbz.
*/
__u64 extensions;
};
+/**
+ * struct drm_i915_gem_set_domain - Adjust the objects write or read domain, in
+ * preparation for accessing the pages via some CPU domain.
+ *
+ * Specifying a new write or read domain will flush the object out of the
+ * previous domain(if required), before then updating the objects domain
+ * tracking with the new domain.
+ *
+ * Note this might involve waiting for the object first if it is still active on
+ * the GPU.
+ *
+ * Supported values for @read_domains and @write_domain:
+ *
+ * - I915_GEM_DOMAIN_WC: Uncached write-combined domain
+ * - I915_GEM_DOMAIN_CPU: CPU cache domain
+ * - I915_GEM_DOMAIN_GTT: Mappable aperture domain
+ *
+ * All other domains are rejected.
+ *
+ * Note that for discrete, starting from DG1, this is no longer supported, and
+ * is instead rejected. On such platforms the CPU domain is effectively static,
+ * where we also only support a single &drm_i915_gem_mmap_offset cache mode,
+ * which can't be set explicitly and instead depends on the object placements,
+ * as per the below.
+ *
+ * Implicit caching rules, starting from DG1:
+ *
+ * - If any of the object placements (see &drm_i915_gem_create_ext_memory_regions)
+ * contain I915_MEMORY_CLASS_DEVICE then the object will be allocated and
+ * mapped as write-combined only.
+ *
+ * - Everything else is always allocated and mapped as write-back, with the
+ * guarantee that everything is also coherent with the GPU.
+ *
+ * Note that this is likely to change in the future again, where we might need
+ * more flexibility on future devices, so making this all explicit as part of a
+ * new &drm_i915_gem_create_ext extension is probable.
+ */
struct drm_i915_gem_set_domain {
- /** Handle for the object */
+ /** @handle: Handle for the object. */
__u32 handle;
- /** New read domains */
+ /** @read_domains: New read domains. */
__u32 read_domains;
- /** New write domain */
+ /**
+ * @write_domain: New write domain.
+ *
+ * Note that having something in the write domain implies it's in the
+ * read domain, and only that read domain.
+ */
__u32 write_domain;
};
@@ -943,6 +1071,7 @@
__u64 offset;
};
+/* DRM_IOCTL_I915_GEM_EXECBUFFER was removed in Linux 5.13 */
struct drm_i915_gem_execbuffer {
/**
* List of buffers to be validated with their relocations to be
@@ -1053,12 +1182,12 @@
__u32 flags;
};
-/**
+/*
* See drm_i915_gem_execbuffer_ext_timeline_fences.
*/
#define DRM_I915_GEM_EXECBUFFER_EXT_TIMELINE_FENCES 0
-/**
+/*
* This structure describes an array of drm_syncobj and associated points for
* timeline variants of drm_syncobj. It is invalid to append this structure to
* the execbuf if I915_EXEC_FENCE_ARRAY is set.
@@ -1299,12 +1428,11 @@
* reading from the object simultaneously.
*
* The value of each engine class is the same as specified in the
- * I915_CONTEXT_SET_ENGINES parameter and via perf, i.e.
+ * I915_CONTEXT_PARAM_ENGINES context parameter and via perf, i.e.
* I915_ENGINE_CLASS_RENDER, I915_ENGINE_CLASS_COPY, etc.
- * reported as active itself. Some hardware may have parallel
- * execution engines, e.g. multiple media engines, which are
- * mapped to the same class identifier and so are not separately
- * reported for busyness.
+ * Some hardware may have parallel execution engines, e.g. multiple
+ * media engines, which are mapped to the same class identifier and so
+ * are not separately reported for busyness.
*
* Caveat emptor:
* Only the boolean result of this query is reliable; that is whether
@@ -1315,49 +1443,91 @@
};
/**
- * I915_CACHING_NONE
+ * struct drm_i915_gem_caching - Set or get the caching for given object
+ * handle.
*
- * GPU access is not coherent with cpu caches. Default for machines without an
- * LLC.
- */
-#define I915_CACHING_NONE 0
-/**
- * I915_CACHING_CACHED
+ * Allow userspace to control the GTT caching bits for a given object when the
+ * object is later mapped through the ppGTT(or GGTT on older platforms lacking
+ * ppGTT support, or if the object is used for scanout). Note that this might
+ * require unbinding the object from the GTT first, if its current caching value
+ * doesn't match.
*
- * GPU access is coherent with cpu caches and furthermore the data is cached in
- * last-level caches shared between cpu cores and the gpu GT. Default on
- * machines with HAS_LLC.
- */
-#define I915_CACHING_CACHED 1
-/**
- * I915_CACHING_DISPLAY
+ * Note that this all changes on discrete platforms, starting from DG1, the
+ * set/get caching is no longer supported, and is now rejected. Instead the CPU
+ * caching attributes(WB vs WC) will become an immutable creation time property
+ * for the object, along with the GTT caching level. For now we don't expose any
+ * new uAPI for this, instead on DG1 this is all implicit, although this largely
+ * shouldn't matter since DG1 is coherent by default(without any way of
+ * controlling it).
*
- * Special GPU caching mode which is coherent with the scanout engines.
- * Transparently falls back to I915_CACHING_NONE on platforms where no special
- * cache mode (like write-through or gfdt flushing) is available. The kernel
- * automatically sets this mode when using a buffer as a scanout target.
- * Userspace can manually set this mode to avoid a costly stall and clflush in
- * the hotpath of drawing the first frame.
+ * Implicit caching rules, starting from DG1:
+ *
+ * - If any of the object placements (see &drm_i915_gem_create_ext_memory_regions)
+ * contain I915_MEMORY_CLASS_DEVICE then the object will be allocated and
+ * mapped as write-combined only.
+ *
+ * - Everything else is always allocated and mapped as write-back, with the
+ * guarantee that everything is also coherent with the GPU.
+ *
+ * Note that this is likely to change in the future again, where we might need
+ * more flexibility on future devices, so making this all explicit as part of a
+ * new &drm_i915_gem_create_ext extension is probable.
+ *
+ * Side note: Part of the reason for this is that changing the at-allocation-time CPU
+ * caching attributes for the pages might be required(and is expensive) if we
+ * need to then CPU map the pages later with different caching attributes. This
+ * inconsistent caching behaviour, while supported on x86, is not universally
+ * supported on other architectures. So for simplicity we opt for setting
+ * everything at creation time, whilst also making it immutable, on discrete
+ * platforms.
*/
-#define I915_CACHING_DISPLAY 2
-
struct drm_i915_gem_caching {
/**
- * Handle of the buffer to set/get the caching level of. */
+ * @handle: Handle of the buffer to set/get the caching level.
+ */
__u32 handle;
/**
- * Cacheing level to apply or return value
+ * @caching: The GTT caching level to apply or possible return value.
*
- * bits0-15 are for generic caching control (i.e. the above defined
- * values). bits16-31 are reserved for platform-specific variations
- * (e.g. l3$ caching on gen7). */
+ * The supported @caching values:
+ *
+ * I915_CACHING_NONE:
+ *
+ * GPU access is not coherent with CPU caches. Default for machines
+ * without an LLC. This means manual flushing might be needed, if we
+ * want GPU access to be coherent.
+ *
+ * I915_CACHING_CACHED:
+ *
+ * GPU access is coherent with CPU caches and furthermore the data is
+ * cached in last-level caches shared between CPU cores and the GPU GT.
+ *
+ * I915_CACHING_DISPLAY:
+ *
+ * Special GPU caching mode which is coherent with the scanout engines.
+ * Transparently falls back to I915_CACHING_NONE on platforms where no
+ * special cache mode (like write-through or gfdt flushing) is
+ * available. The kernel automatically sets this mode when using a
+ * buffer as a scanout target. Userspace can manually set this mode to
+ * avoid a costly stall and clflush in the hotpath of drawing the first
+ * frame.
+ */
+#define I915_CACHING_NONE 0
+#define I915_CACHING_CACHED 1
+#define I915_CACHING_DISPLAY 2
__u32 caching;
};
#define I915_TILING_NONE 0
#define I915_TILING_X 1
#define I915_TILING_Y 2
+/*
+ * Do not add new tiling types here. The I915_TILING_* values are for
+ * de-tiling fence registers that no longer exist on modern platforms. Although
+ * the hardware may support new types of tiling in general (e.g., Tile4), we
+ * do not need to add them to the uapi that is specific to now-defunct ioctls.
+ */
#define I915_TILING_LAST I915_TILING_Y
#define I915_BIT_6_SWIZZLE_NONE 0
@@ -1590,6 +1760,10 @@
__u32 size;
__u64 param;
#define I915_CONTEXT_PARAM_BAN_PERIOD 0x1
+/* I915_CONTEXT_PARAM_NO_ZEROMAP has been removed. On the off chance
+ * someone somewhere has attempted to use it, never re-use this context
+ * param number.
+ */
#define I915_CONTEXT_PARAM_NO_ZEROMAP 0x2
#define I915_CONTEXT_PARAM_GTT_SIZE 0x3
#define I915_CONTEXT_PARAM_NO_ERROR_CAPTURE 0x4
@@ -1656,6 +1830,7 @@
* Extensions:
* i915_context_engines_load_balance (I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE)
* i915_context_engines_bond (I915_CONTEXT_ENGINES_EXT_BOND)
+ * i915_context_engines_parallel_submit (I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT)
*/
#define I915_CONTEXT_PARAM_ENGINES 0xa
@@ -1674,32 +1849,65 @@
*/
#define I915_CONTEXT_PARAM_PERSISTENCE 0xb
-/*
- * I915_CONTEXT_PARAM_RINGSIZE:
- *
- * Sets the size of the CS ringbuffer to use for logical ring contexts. This
- * applies a limit of how many batches can be queued to HW before the caller
- * is blocked due to lack of space for more commands.
- *
- * Only reliably possible to be set prior to first use, i.e. during
- * construction. At any later point, the current execution must be flushed as
- * the ring can only be changed while the context is idle. Note, the ringsize
- * can be specified as a constructor property, see
- * I915_CONTEXT_CREATE_EXT_SETPARAM, but can also be set later if required.
- *
- * Only applies to the current set of engine and lost when those engines
- * are replaced by a new mapping (see I915_CONTEXT_PARAM_ENGINES).
- *
- * Must be between 4 - 512 KiB, in intervals of page size [4 KiB].
- * Default is 16 KiB.
+/* This API has been removed. On the off chance someone somewhere has
+ * attempted to use it, never re-use this context param number.
*/
#define I915_CONTEXT_PARAM_RINGSIZE 0xc
+
+/*
+ * I915_CONTEXT_PARAM_PROTECTED_CONTENT:
+ *
+ * Mark that the context makes use of protected content, which will result
+ * in the context being invalidated when the protected content session is.
+ * Given that the protected content session is killed on suspend, the device
+ * is kept awake for the lifetime of a protected context, so the user should
+ * make sure to dispose of them once done.
+ * This flag can only be set at context creation time and, when set to true,
+ * must be preceded by an explicit setting of I915_CONTEXT_PARAM_RECOVERABLE
+ * to false. This flag can't be set to true in conjunction with setting the
+ * I915_CONTEXT_PARAM_BANNABLE flag to false. Creation example:
+ *
+ * .. code-block:: C
+ *
+ * struct drm_i915_gem_context_create_ext_setparam p_protected = {
+ * .base = {
+ * .name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ * },
+ * .param = {
+ * .param = I915_CONTEXT_PARAM_PROTECTED_CONTENT,
+ * .value = 1,
+ * }
+ * };
+ * struct drm_i915_gem_context_create_ext_setparam p_norecover = {
+ * .base = {
+ * .name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ * .next_extension = to_user_pointer(&p_protected),
+ * },
+ * .param = {
+ * .param = I915_CONTEXT_PARAM_RECOVERABLE,
+ * .value = 0,
+ * }
+ * };
+ * struct drm_i915_gem_context_create_ext create = {
+ * .flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS,
+ * .extensions = to_user_pointer(&p_norecover);
+ * };
+ *
+ * ctx_id = gem_context_create_ext(drm_fd, &create);
+ *
+ * In addition to the normal failure cases, setting this flag during context
+ * creation can result in the following errors:
+ *
+ * -ENODEV: feature not available
+ * -EPERM: trying to mark a recoverable or not bannable context as protected
+ */
+#define I915_CONTEXT_PARAM_PROTECTED_CONTENT 0xd
/* Must be kept compact -- no holes and well documented */
__u64 value;
};
-/**
+/*
* Context SSEU programming
*
* It may be necessary for either functional or performance reason to configure
@@ -1758,6 +1966,69 @@
__u32 rsvd;
};
+/**
+ * DOC: Virtual Engine uAPI
+ *
+ * Virtual engine is a concept where userspace is able to configure a set of
+ * physical engines, submit a batch buffer, and let the driver execute it on any
+ * engine from the set as it sees fit.
+ *
+ * This is primarily useful on parts which have multiple instances of a same
+ * class engine, like for example GT3+ Skylake parts with their two VCS engines.
+ *
+ * For instance userspace can enumerate all engines of a certain class using the
+ * previously described `Engine Discovery uAPI`_. After that userspace can
+ * create a GEM context with a placeholder slot for the virtual engine (using
+ * `I915_ENGINE_CLASS_INVALID` and `I915_ENGINE_CLASS_INVALID_NONE` for class
+ * and instance respectively) and finally using the
+ * `I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE` extension place a virtual engine in
+ * the same reserved slot.
+ *
+ * Example of creating a virtual engine and submitting a batch buffer to it:
+ *
+ * .. code-block:: C
+ *
+ * I915_DEFINE_CONTEXT_ENGINES_LOAD_BALANCE(virtual, 2) = {
+ * .base.name = I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE,
+ * .engine_index = 0, // Place this virtual engine into engine map slot 0
+ * .num_siblings = 2,
+ * .engines = { { I915_ENGINE_CLASS_VIDEO, 0 },
+ * { I915_ENGINE_CLASS_VIDEO, 1 }, },
+ * };
+ * I915_DEFINE_CONTEXT_PARAM_ENGINES(engines, 1) = {
+ * .engines = { { I915_ENGINE_CLASS_INVALID,
+ * I915_ENGINE_CLASS_INVALID_NONE } },
+ * .extensions = to_user_pointer(&virtual), // Chains after load_balance extension
+ * };
+ * struct drm_i915_gem_context_create_ext_setparam p_engines = {
+ * .base = {
+ * .name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ * },
+ * .param = {
+ * .param = I915_CONTEXT_PARAM_ENGINES,
+ * .value = to_user_pointer(&engines),
+ * .size = sizeof(engines),
+ * },
+ * };
+ * struct drm_i915_gem_context_create_ext create = {
+ * .flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS,
+ * .extensions = to_user_pointer(&p_engines);
+ * };
+ *
+ * ctx_id = gem_context_create_ext(drm_fd, &create);
+ *
+ * // Now we have created a GEM context with its engine map containing a
+ * // single virtual engine. Submissions to this slot can go either to
+ * // vcs0 or vcs1, depending on the load balancing algorithm used inside
+ * // the driver. The load balancing is dynamic from one batch buffer to
+ * // another and transparent to userspace.
+ *
+ * ...
+ * execbuf.rsvd1 = ctx_id;
+ * execbuf.flags = 0; // Submits to index 0 which is the virtual engine
+ * gem_execbuf(drm_fd, &execbuf);
+ */
+
/*
* i915_context_engines_load_balance:
*
@@ -1834,10 +2105,195 @@
struct i915_engine_class_instance engines[N__]; \
} __attribute__((packed)) name__
+/**
+ * struct i915_context_engines_parallel_submit - Configure engine for
+ * parallel submission.
+ *
+ * Setup a slot in the context engine map to allow multiple BBs to be submitted
+ * in a single execbuf IOCTL. Those BBs will then be scheduled to run on the GPU
+ * in parallel. Multiple hardware contexts are created internally in the i915 to
+ * run these BBs. Once a slot is configured for N BBs only N BBs can be
+ * submitted in each execbuf IOCTL and this is implicit behavior e.g. The user
+ * doesn't tell the execbuf IOCTL there are N BBs, the execbuf IOCTL knows how
+ * many BBs there are based on the slot's configuration. The N BBs are the last
+ * N buffer objects or first N if I915_EXEC_BATCH_FIRST is set.
+ *
+ * The default placement behavior is to create implicit bonds between each
+ * context if each context maps to more than 1 physical engine (e.g. context is
+ * a virtual engine). Also we only allow contexts of same engine class and these
+ * contexts must be in logically contiguous order. Examples of the placement
+ * behavior are described below. Lastly, the default is to not allow BBs to be
+ * preempted mid-batch. Rather insert coordinated preemption points on all
+ * hardware contexts between each set of BBs. Flags could be added in the future
+ * to change both of these default behaviors.
+ *
+ * Returns -EINVAL if hardware context placement configuration is invalid or if
+ * the placement configuration isn't supported on the platform / submission
+ * interface.
+ * Returns -ENODEV if extension isn't supported on the platform / submission
+ * interface.
+ *
+ * .. code-block:: none
+ *
+ * Examples syntax:
+ * CS[X] = generic engine of same class, logical instance X
+ * INVALID = I915_ENGINE_CLASS_INVALID, I915_ENGINE_CLASS_INVALID_NONE
+ *
+ * Example 1 pseudo code:
+ * set_engines(INVALID)
+ * set_parallel(engine_index=0, width=2, num_siblings=1,
+ * engines=CS[0],CS[1])
+ *
+ * Results in the following valid placement:
+ * CS[0], CS[1]
+ *
+ * Example 2 pseudo code:
+ * set_engines(INVALID)
+ * set_parallel(engine_index=0, width=2, num_siblings=2,
+ * engines=CS[0],CS[2],CS[1],CS[3])
+ *
+ * Results in the following valid placements:
+ * CS[0], CS[1]
+ * CS[2], CS[3]
+ *
+ * This can be thought of as two virtual engines, each containing two
+ * engines thereby making a 2D array. However, there are bonds tying the
+ * entries together and placing restrictions on how they can be scheduled.
+ * Specifically, the scheduler can choose only vertical columns from the 2D
+ * array. That is, CS[0] is bonded to CS[1] and CS[2] to CS[3]. So if the
+ * scheduler wants to submit to CS[0], it must also choose CS[1] and vice
+ * versa. Same for CS[2] requires also using CS[3].
+ * VE[0] = CS[0], CS[2]
+ * VE[1] = CS[1], CS[3]
+ *
+ * Example 3 pseudo code:
+ * set_engines(INVALID)
+ * set_parallel(engine_index=0, width=2, num_siblings=2,
+ * engines=CS[0],CS[1],CS[1],CS[3])
+ *
+ * Results in the following valid and invalid placements:
+ * CS[0], CS[1]
+ * CS[1], CS[3] - Not logically contiguous, return -EINVAL
+ */
+struct i915_context_engines_parallel_submit {
+ /**
+ * @base: base user extension.
+ */
+ struct i915_user_extension base;
+
+ /**
+ * @engine_index: slot for parallel engine
+ */
+ __u16 engine_index;
+
+ /**
+ * @width: number of contexts per parallel engine or in other words the
+ * number of batches in each submission
+ */
+ __u16 width;
+
+ /**
+ * @num_siblings: number of siblings per context or in other words the
+ * number of possible placements for each submission
+ */
+ __u16 num_siblings;
+
+ /**
+ * @mbz16: reserved for future use; must be zero
+ */
+ __u16 mbz16;
+
+ /**
+ * @flags: all undefined flags must be zero, currently not defined flags
+ */
+ __u64 flags;
+
+ /**
+ * @mbz64: reserved for future use; must be zero
+ */
+ __u64 mbz64[3];
+
+ /**
+ * @engines: 2-d array of engine instances to configure parallel engine
+ *
+ * length = width (i) * num_siblings (j)
+ * index = j + i * num_siblings
+ */
+ struct i915_engine_class_instance engines[0];
+
+} __packed;
+
+#define I915_DEFINE_CONTEXT_ENGINES_PARALLEL_SUBMIT(name__, N__) struct { \
+ struct i915_user_extension base; \
+ __u16 engine_index; \
+ __u16 width; \
+ __u16 num_siblings; \
+ __u16 mbz16; \
+ __u64 flags; \
+ __u64 mbz64[3]; \
+ struct i915_engine_class_instance engines[N__]; \
+} __attribute__((packed)) name__
+
+/**
+ * DOC: Context Engine Map uAPI
+ *
+ * Context engine map is a new way of addressing engines when submitting batch-
+ * buffers, replacing the existing way of using identifiers like `I915_EXEC_BLT`
+ * inside the flags field of `struct drm_i915_gem_execbuffer2`.
+ *
+ * To use it created GEM contexts need to be configured with a list of engines
+ * the user is intending to submit to. This is accomplished using the
+ * `I915_CONTEXT_PARAM_ENGINES` parameter and `struct
+ * i915_context_param_engines`.
+ *
+ * For such contexts the `I915_EXEC_RING_MASK` field becomes an index into the
+ * configured map.
+ *
+ * Example of creating such context and submitting against it:
+ *
+ * .. code-block:: C
+ *
+ * I915_DEFINE_CONTEXT_PARAM_ENGINES(engines, 2) = {
+ * .engines = { { I915_ENGINE_CLASS_RENDER, 0 },
+ * { I915_ENGINE_CLASS_COPY, 0 } }
+ * };
+ * struct drm_i915_gem_context_create_ext_setparam p_engines = {
+ * .base = {
+ * .name = I915_CONTEXT_CREATE_EXT_SETPARAM,
+ * },
+ * .param = {
+ * .param = I915_CONTEXT_PARAM_ENGINES,
+ * .value = to_user_pointer(&engines),
+ * .size = sizeof(engines),
+ * },
+ * };
+ * struct drm_i915_gem_context_create_ext create = {
+ * .flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS,
+ * .extensions = to_user_pointer(&p_engines);
+ * };
+ *
+ * ctx_id = gem_context_create_ext(drm_fd, &create);
+ *
+ * // We have now created a GEM context with two engines in the map:
+ * // Index 0 points to rcs0 while index 1 points to bcs0. Other engines
+ * // will not be accessible from this context.
+ *
+ * ...
+ * execbuf.rsvd1 = ctx_id;
+ * execbuf.flags = 0; // Submits to index 0, which is rcs0 for this context
+ * gem_execbuf(drm_fd, &execbuf);
+ *
+ * ...
+ * execbuf.rsvd1 = ctx_id;
+ * execbuf.flags = 1; // Submits to index 0, which is bcs0 for this context
+ * gem_execbuf(drm_fd, &execbuf);
+ */
+
struct i915_context_param_engines {
__u64 extensions; /* linked chain of extension blocks, 0 terminates */
#define I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE 0 /* see i915_context_engines_load_balance */
#define I915_CONTEXT_ENGINES_EXT_BOND 1 /* see i915_context_engines_bond */
+#define I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT 2 /* see i915_context_engines_parallel_submit */
struct i915_engine_class_instance engines[0];
} __attribute__((packed));
@@ -1852,20 +2308,10 @@
struct drm_i915_gem_context_param param;
};
-struct drm_i915_gem_context_create_ext_clone {
+/* This API has been removed. On the off chance someone somewhere has
+ * attempted to use it, never re-use this extension number.
+ */
#define I915_CONTEXT_CREATE_EXT_CLONE 1
- struct i915_user_extension base;
- __u32 clone_id;
- __u32 flags;
-#define I915_CONTEXT_CLONE_ENGINES (1u << 0)
-#define I915_CONTEXT_CLONE_FLAGS (1u << 1)
-#define I915_CONTEXT_CLONE_SCHEDATTR (1u << 2)
-#define I915_CONTEXT_CLONE_SSEU (1u << 3)
-#define I915_CONTEXT_CLONE_TIMELINE (1u << 4)
-#define I915_CONTEXT_CLONE_VM (1u << 5)
-#define I915_CONTEXT_CLONE_UNKNOWN -(I915_CONTEXT_CLONE_VM << 1)
- __u64 rsvd;
-};
struct drm_i915_gem_context_destroy {
__u32 ctx_id;
@@ -1937,14 +2383,69 @@
__u32 pad;
};
+/**
+ * struct drm_i915_gem_userptr - Create GEM object from user allocated memory.
+ *
+ * Userptr objects have several restrictions on what ioctls can be used with the
+ * object handle.
+ */
struct drm_i915_gem_userptr {
+ /**
+ * @user_ptr: The pointer to the allocated memory.
+ *
+ * Needs to be aligned to PAGE_SIZE.
+ */
__u64 user_ptr;
+
+ /**
+ * @user_size:
+ *
+ * The size in bytes for the allocated memory. This will also become the
+ * object size.
+ *
+ * Needs to be aligned to PAGE_SIZE, and should be at least PAGE_SIZE,
+ * or larger.
+ */
__u64 user_size;
+
+ /**
+ * @flags:
+ *
+ * Supported flags:
+ *
+ * I915_USERPTR_READ_ONLY:
+ *
+ * Mark the object as readonly, this also means GPU access can only be
+ * readonly. This is only supported on HW which supports readonly access
+ * through the GTT. If the HW can't support readonly access, an error is
+ * returned.
+ *
+ * I915_USERPTR_PROBE:
+ *
+ * Probe the provided @user_ptr range and validate that the @user_ptr is
+ * indeed pointing to normal memory and that the range is also valid.
+ * For example if some garbage address is given to the kernel, then this
+ * should complain.
+ *
+ * Returns -EFAULT if the probe failed.
+ *
+ * Note that this doesn't populate the backing pages, and also doesn't
+ * guarantee that the object will remain valid when the object is
+ * eventually used.
+ *
+ * The kernel supports this feature if I915_PARAM_HAS_USERPTR_PROBE
+ * returns a non-zero value.
+ *
+ * I915_USERPTR_UNSYNCHRONIZED:
+ *
+ * NOT USED. Setting this flag will result in an error.
+ */
__u32 flags;
#define I915_USERPTR_READ_ONLY 0x1
+#define I915_USERPTR_PROBE 0x2
#define I915_USERPTR_UNSYNCHRONIZED 0x80000000
/**
- * Returned handle for the object.
+ * @handle: Returned handle for the object.
*
* Object handles are nonzero.
*/
@@ -2066,7 +2567,7 @@
__u64 properties_ptr;
};
-/**
+/*
* Enable data capture for a stream that was either opened in a disabled state
* via I915_PERF_FLAG_DISABLED or was later disabled via
* I915_PERF_IOCTL_DISABLE.
@@ -2080,7 +2581,7 @@
*/
#define I915_PERF_IOCTL_ENABLE _IO('i', 0x0)
-/**
+/*
* Disable data capture for a stream.
*
* It is an error to try and read a stream that is disabled.
@@ -2089,7 +2590,7 @@
*/
#define I915_PERF_IOCTL_DISABLE _IO('i', 0x1)
-/**
+/*
* Change metrics_set captured by a stream.
*
* If the stream is bound to a specific context, the configuration change
@@ -2102,7 +2603,7 @@
*/
#define I915_PERF_IOCTL_CONFIG _IO('i', 0x2)
-/**
+/*
* Common to all i915 perf records
*/
struct drm_i915_perf_record_header {
@@ -2150,7 +2651,7 @@
DRM_I915_PERF_RECORD_MAX /* non-ABI */
};
-/**
+/*
* Structure to upload perf dynamic configuration into the kernel.
*/
struct drm_i915_perf_oa_config {
@@ -2171,53 +2672,95 @@
__u64 flex_regs_ptr;
};
+/**
+ * struct drm_i915_query_item - An individual query for the kernel to process.
+ *
+ * The behaviour is determined by the @query_id. Note that exactly what
+ * @data_ptr is also depends on the specific @query_id.
+ */
struct drm_i915_query_item {
+ /** @query_id: The id for this query */
__u64 query_id;
#define DRM_I915_QUERY_TOPOLOGY_INFO 1
#define DRM_I915_QUERY_ENGINE_INFO 2
#define DRM_I915_QUERY_PERF_CONFIG 3
+#define DRM_I915_QUERY_MEMORY_REGIONS 4
/* Must be kept compact -- no holes and well documented */
- /*
+ /**
+ * @length:
+ *
* When set to zero by userspace, this is filled with the size of the
- * data to be written at the data_ptr pointer. The kernel sets this
+ * data to be written at the @data_ptr pointer. The kernel sets this
* value to a negative value to signal an error on a particular query
* item.
*/
__s32 length;
- /*
+ /**
+ * @flags:
+ *
* When query_id == DRM_I915_QUERY_TOPOLOGY_INFO, must be 0.
*
* When query_id == DRM_I915_QUERY_PERF_CONFIG, must be one of the
- * following :
- * - DRM_I915_QUERY_PERF_CONFIG_LIST
- * - DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID
- * - DRM_I915_QUERY_PERF_CONFIG_FOR_UUID
+ * following:
+ *
+ * - DRM_I915_QUERY_PERF_CONFIG_LIST
+ * - DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID
+ * - DRM_I915_QUERY_PERF_CONFIG_FOR_UUID
*/
__u32 flags;
#define DRM_I915_QUERY_PERF_CONFIG_LIST 1
#define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID 2
#define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID 3
- /*
- * Data will be written at the location pointed by data_ptr when the
- * value of length matches the length of the data to be written by the
+ /**
+ * @data_ptr:
+ *
+ * Data will be written at the location pointed by @data_ptr when the
+ * value of @length matches the length of the data to be written by the
* kernel.
*/
__u64 data_ptr;
};
+/**
+ * struct drm_i915_query - Supply an array of struct drm_i915_query_item for the
+ * kernel to fill out.
+ *
+ * Note that this is generally a two step process for each struct
+ * drm_i915_query_item in the array:
+ *
+ * 1. Call the DRM_IOCTL_I915_QUERY, giving it our array of struct
+ * drm_i915_query_item, with &drm_i915_query_item.length set to zero. The
+ * kernel will then fill in the size, in bytes, which tells userspace how
+ * memory it needs to allocate for the blob(say for an array of properties).
+ *
+ * 2. Next we call DRM_IOCTL_I915_QUERY again, this time with the
+ * &drm_i915_query_item.data_ptr equal to our newly allocated blob. Note that
+ * the &drm_i915_query_item.length should still be the same as what the
+ * kernel previously set. At this point the kernel can fill in the blob.
+ *
+ * Note that for some query items it can make sense for userspace to just pass
+ * in a buffer/blob equal to or larger than the required size. In this case only
+ * a single ioctl call is needed. For some smaller query items this can work
+ * quite well.
+ *
+ */
struct drm_i915_query {
+ /** @num_items: The number of elements in the @items_ptr array */
__u32 num_items;
- /*
- * Unused for now. Must be cleared to zero.
+ /**
+ * @flags: Unused for now. Must be cleared to zero.
*/
__u32 flags;
- /*
- * This points to an array of num_items drm_i915_query_item structures.
+ /**
+ * @items_ptr:
+ *
+ * Pointer to an array of struct drm_i915_query_item. The number of
+ * array elements is @num_items.
*/
__u64 items_ptr;
};
@@ -2286,27 +2829,103 @@
};
/**
+ * DOC: Engine Discovery uAPI
+ *
+ * Engine discovery uAPI is a way of enumerating physical engines present in a
+ * GPU associated with an open i915 DRM file descriptor. This supersedes the old
+ * way of using `DRM_IOCTL_I915_GETPARAM` and engine identifiers like
+ * `I915_PARAM_HAS_BLT`.
+ *
+ * The need for this interface came starting with Icelake and newer GPUs, which
+ * started to establish a pattern of having multiple engines of a same class,
+ * where not all instances were always completely functionally equivalent.
+ *
+ * Entry point for this uapi is `DRM_IOCTL_I915_QUERY` with the
+ * `DRM_I915_QUERY_ENGINE_INFO` as the queried item id.
+ *
+ * Example for getting the list of engines:
+ *
+ * .. code-block:: C
+ *
+ * struct drm_i915_query_engine_info *info;
+ * struct drm_i915_query_item item = {
+ * .query_id = DRM_I915_QUERY_ENGINE_INFO;
+ * };
+ * struct drm_i915_query query = {
+ * .num_items = 1,
+ * .items_ptr = (uintptr_t)&item,
+ * };
+ * int err, i;
+ *
+ * // First query the size of the blob we need, this needs to be large
+ * // enough to hold our array of engines. The kernel will fill out the
+ * // item.length for us, which is the number of bytes we need.
+ * //
+ * // Alternatively a large buffer can be allocated straight away enabling
+ * // querying in one pass, in which case item.length should contain the
+ * // length of the provided buffer.
+ * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ * if (err) ...
+ *
+ * info = calloc(1, item.length);
+ * // Now that we allocated the required number of bytes, we call the ioctl
+ * // again, this time with the data_ptr pointing to our newly allocated
+ * // blob, which the kernel can then populate with info on all engines.
+ * item.data_ptr = (uintptr_t)&info,
+ *
+ * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ * if (err) ...
+ *
+ * // We can now access each engine in the array
+ * for (i = 0; i < info->num_engines; i++) {
+ * struct drm_i915_engine_info einfo = info->engines[i];
+ * u16 class = einfo.engine.class;
+ * u16 instance = einfo.engine.instance;
+ * ....
+ * }
+ *
+ * free(info);
+ *
+ * Each of the enumerated engines, apart from being defined by its class and
+ * instance (see `struct i915_engine_class_instance`), also can have flags and
+ * capabilities defined as documented in i915_drm.h.
+ *
+ * For instance video engines which support HEVC encoding will have the
+ * `I915_VIDEO_CLASS_CAPABILITY_HEVC` capability bit set.
+ *
+ * Engine discovery only fully comes to its own when combined with the new way
+ * of addressing engines when submitting batch buffers using contexts with
+ * engine maps configured.
+ */
+
+/**
* struct drm_i915_engine_info
*
* Describes one engine and it's capabilities as known to the driver.
*/
struct drm_i915_engine_info {
- /** Engine class and instance. */
+ /** @engine: Engine class and instance. */
struct i915_engine_class_instance engine;
- /** Reserved field. */
+ /** @rsvd0: Reserved field. */
__u32 rsvd0;
- /** Engine flags. */
+ /** @flags: Engine flags. */
__u64 flags;
+#define I915_ENGINE_INFO_HAS_LOGICAL_INSTANCE (1 << 0)
- /** Capabilities of this engine. */
+ /** @capabilities: Capabilities of this engine. */
__u64 capabilities;
#define I915_VIDEO_CLASS_CAPABILITY_HEVC (1 << 0)
#define I915_VIDEO_AND_ENHANCE_CLASS_CAPABILITY_SFC (1 << 1)
- /** Reserved fields. */
- __u64 rsvd1[4];
+ /** @logical_instance: Logical instance of engine */
+ __u16 logical_instance;
+
+ /** @rsvd1: Reserved fields. */
+ __u16 rsvd1[3];
+ /** @rsvd2: Reserved fields. */
+ __u64 rsvd2[3];
};
/**
@@ -2316,13 +2935,13 @@
* an array of struct drm_i915_engine_info structures.
*/
struct drm_i915_query_engine_info {
- /** Number of struct drm_i915_engine_info structs following. */
+ /** @num_engines: Number of struct drm_i915_engine_info structs following. */
__u32 num_engines;
- /** MBZ */
+ /** @rsvd: MBZ */
__u32 rsvd[3];
- /** Marker for drm_i915_engine_info structures. */
+ /** @engines: Marker for drm_i915_engine_info structures. */
struct drm_i915_engine_info engines[];
};
@@ -2376,6 +2995,289 @@
__u8 data[];
};
+/**
+ * enum drm_i915_gem_memory_class - Supported memory classes
+ */
+enum drm_i915_gem_memory_class {
+ /** @I915_MEMORY_CLASS_SYSTEM: System memory */
+ I915_MEMORY_CLASS_SYSTEM = 0,
+ /** @I915_MEMORY_CLASS_DEVICE: Device local-memory */
+ I915_MEMORY_CLASS_DEVICE,
+};
+
+/**
+ * struct drm_i915_gem_memory_class_instance - Identify particular memory region
+ */
+struct drm_i915_gem_memory_class_instance {
+ /** @memory_class: See enum drm_i915_gem_memory_class */
+ __u16 memory_class;
+
+ /** @memory_instance: Which instance */
+ __u16 memory_instance;
+};
+
+/**
+ * struct drm_i915_memory_region_info - Describes one region as known to the
+ * driver.
+ *
+ * Note that we reserve some stuff here for potential future work. As an example
+ * we might want expose the capabilities for a given region, which could include
+ * things like if the region is CPU mappable/accessible, what are the supported
+ * mapping types etc.
+ *
+ * Note that to extend struct drm_i915_memory_region_info and struct
+ * drm_i915_query_memory_regions in the future the plan is to do the following:
+ *
+ * .. code-block:: C
+ *
+ * struct drm_i915_memory_region_info {
+ * struct drm_i915_gem_memory_class_instance region;
+ * union {
+ * __u32 rsvd0;
+ * __u32 new_thing1;
+ * };
+ * ...
+ * union {
+ * __u64 rsvd1[8];
+ * struct {
+ * __u64 new_thing2;
+ * __u64 new_thing3;
+ * ...
+ * };
+ * };
+ * };
+ *
+ * With this things should remain source compatible between versions for
+ * userspace, even as we add new fields.
+ *
+ * Note this is using both struct drm_i915_query_item and struct drm_i915_query.
+ * For this new query we are adding the new query id DRM_I915_QUERY_MEMORY_REGIONS
+ * at &drm_i915_query_item.query_id.
+ */
+struct drm_i915_memory_region_info {
+ /** @region: The class:instance pair encoding */
+ struct drm_i915_gem_memory_class_instance region;
+
+ /** @rsvd0: MBZ */
+ __u32 rsvd0;
+
+ /** @probed_size: Memory probed by the driver (-1 = unknown) */
+ __u64 probed_size;
+
+ /** @unallocated_size: Estimate of memory remaining (-1 = unknown) */
+ __u64 unallocated_size;
+
+ /** @rsvd1: MBZ */
+ __u64 rsvd1[8];
+};
+
+/**
+ * struct drm_i915_query_memory_regions
+ *
+ * The region info query enumerates all regions known to the driver by filling
+ * in an array of struct drm_i915_memory_region_info structures.
+ *
+ * Example for getting the list of supported regions:
+ *
+ * .. code-block:: C
+ *
+ * struct drm_i915_query_memory_regions *info;
+ * struct drm_i915_query_item item = {
+ * .query_id = DRM_I915_QUERY_MEMORY_REGIONS;
+ * };
+ * struct drm_i915_query query = {
+ * .num_items = 1,
+ * .items_ptr = (uintptr_t)&item,
+ * };
+ * int err, i;
+ *
+ * // First query the size of the blob we need, this needs to be large
+ * // enough to hold our array of regions. The kernel will fill out the
+ * // item.length for us, which is the number of bytes we need.
+ * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ * if (err) ...
+ *
+ * info = calloc(1, item.length);
+ * // Now that we allocated the required number of bytes, we call the ioctl
+ * // again, this time with the data_ptr pointing to our newly allocated
+ * // blob, which the kernel can then populate with the all the region info.
+ * item.data_ptr = (uintptr_t)&info,
+ *
+ * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query);
+ * if (err) ...
+ *
+ * // We can now access each region in the array
+ * for (i = 0; i < info->num_regions; i++) {
+ * struct drm_i915_memory_region_info mr = info->regions[i];
+ * u16 class = mr.region.class;
+ * u16 instance = mr.region.instance;
+ *
+ * ....
+ * }
+ *
+ * free(info);
+ */
+struct drm_i915_query_memory_regions {
+ /** @num_regions: Number of supported regions */
+ __u32 num_regions;
+
+ /** @rsvd: MBZ */
+ __u32 rsvd[3];
+
+ /** @regions: Info about each supported region */
+ struct drm_i915_memory_region_info regions[];
+};
+
+/**
+ * struct drm_i915_gem_create_ext - Existing gem_create behaviour, with added
+ * extension support using struct i915_user_extension.
+ *
+ * Note that in the future we want to have our buffer flags here, at least for
+ * the stuff that is immutable. Previously we would have two ioctls, one to
+ * create the object with gem_create, and another to apply various parameters,
+ * however this creates some ambiguity for the params which are considered
+ * immutable. Also in general we're phasing out the various SET/GET ioctls.
+ */
+struct drm_i915_gem_create_ext {
+ /**
+ * @size: Requested size for the object.
+ *
+ * The (page-aligned) allocated size for the object will be returned.
+ *
+ * Note that for some devices we have might have further minimum
+ * page-size restrictions(larger than 4K), like for device local-memory.
+ * However in general the final size here should always reflect any
+ * rounding up, if for example using the I915_GEM_CREATE_EXT_MEMORY_REGIONS
+ * extension to place the object in device local-memory.
+ */
+ __u64 size;
+ /**
+ * @handle: Returned handle for the object.
+ *
+ * Object handles are nonzero.
+ */
+ __u32 handle;
+ /** @flags: MBZ */
+ __u32 flags;
+ /**
+ * @extensions: The chain of extensions to apply to this object.
+ *
+ * This will be useful in the future when we need to support several
+ * different extensions, and we need to apply more than one when
+ * creating the object. See struct i915_user_extension.
+ *
+ * If we don't supply any extensions then we get the same old gem_create
+ * behaviour.
+ *
+ * For I915_GEM_CREATE_EXT_MEMORY_REGIONS usage see
+ * struct drm_i915_gem_create_ext_memory_regions.
+ *
+ * For I915_GEM_CREATE_EXT_PROTECTED_CONTENT usage see
+ * struct drm_i915_gem_create_ext_protected_content.
+ */
+#define I915_GEM_CREATE_EXT_MEMORY_REGIONS 0
+#define I915_GEM_CREATE_EXT_PROTECTED_CONTENT 1
+ __u64 extensions;
+};
+
+/**
+ * struct drm_i915_gem_create_ext_memory_regions - The
+ * I915_GEM_CREATE_EXT_MEMORY_REGIONS extension.
+ *
+ * Set the object with the desired set of placements/regions in priority
+ * order. Each entry must be unique and supported by the device.
+ *
+ * This is provided as an array of struct drm_i915_gem_memory_class_instance, or
+ * an equivalent layout of class:instance pair encodings. See struct
+ * drm_i915_query_memory_regions and DRM_I915_QUERY_MEMORY_REGIONS for how to
+ * query the supported regions for a device.
+ *
+ * As an example, on discrete devices, if we wish to set the placement as
+ * device local-memory we can do something like:
+ *
+ * .. code-block:: C
+ *
+ * struct drm_i915_gem_memory_class_instance region_lmem = {
+ * .memory_class = I915_MEMORY_CLASS_DEVICE,
+ * .memory_instance = 0,
+ * };
+ * struct drm_i915_gem_create_ext_memory_regions regions = {
+ * .base = { .name = I915_GEM_CREATE_EXT_MEMORY_REGIONS },
+ * .regions = (uintptr_t)®ion_lmem,
+ * .num_regions = 1,
+ * };
+ * struct drm_i915_gem_create_ext create_ext = {
+ * .size = 16 * PAGE_SIZE,
+ * .extensions = (uintptr_t)®ions,
+ * };
+ *
+ * int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext);
+ * if (err) ...
+ *
+ * At which point we get the object handle in &drm_i915_gem_create_ext.handle,
+ * along with the final object size in &drm_i915_gem_create_ext.size, which
+ * should account for any rounding up, if required.
+ */
+struct drm_i915_gem_create_ext_memory_regions {
+ /** @base: Extension link. See struct i915_user_extension. */
+ struct i915_user_extension base;
+
+ /** @pad: MBZ */
+ __u32 pad;
+ /** @num_regions: Number of elements in the @regions array. */
+ __u32 num_regions;
+ /**
+ * @regions: The regions/placements array.
+ *
+ * An array of struct drm_i915_gem_memory_class_instance.
+ */
+ __u64 regions;
+};
+
+/**
+ * struct drm_i915_gem_create_ext_protected_content - The
+ * I915_OBJECT_PARAM_PROTECTED_CONTENT extension.
+ *
+ * If this extension is provided, buffer contents are expected to be protected
+ * by PXP encryption and require decryption for scan out and processing. This
+ * is only possible on platforms that have PXP enabled, on all other scenarios
+ * using this extension will cause the ioctl to fail and return -ENODEV. The
+ * flags parameter is reserved for future expansion and must currently be set
+ * to zero.
+ *
+ * The buffer contents are considered invalid after a PXP session teardown.
+ *
+ * The encryption is guaranteed to be processed correctly only if the object
+ * is submitted with a context created using the
+ * I915_CONTEXT_PARAM_PROTECTED_CONTENT flag. This will also enable extra checks
+ * at submission time on the validity of the objects involved.
+ *
+ * Below is an example on how to create a protected object:
+ *
+ * .. code-block:: C
+ *
+ * struct drm_i915_gem_create_ext_protected_content protected_ext = {
+ * .base = { .name = I915_GEM_CREATE_EXT_PROTECTED_CONTENT },
+ * .flags = 0,
+ * };
+ * struct drm_i915_gem_create_ext create_ext = {
+ * .size = PAGE_SIZE,
+ * .extensions = (uintptr_t)&protected_ext,
+ * };
+ *
+ * int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext);
+ * if (err) ...
+ */
+struct drm_i915_gem_create_ext_protected_content {
+ /** @base: Extension link. See struct i915_user_extension. */
+ struct i915_user_extension base;
+ /** @flags: reserved for future usage, currently MBZ */
+ __u32 flags;
+};
+
+/* ID of the protected content session managed by i915 when PXP is active */
+#define I915_PROTECTED_CONTENT_DEFAULT_SESSION 0xf
+
#if defined(__cplusplus)
}
#endif
diff --git a/original/uapi/drm/mga_drm.h b/original/uapi/drm/mga_drm.h
index 8c43375..bb31567 100644
--- a/original/uapi/drm/mga_drm.h
+++ b/original/uapi/drm/mga_drm.h
@@ -279,20 +279,22 @@
unsigned long sarea_priv_offset;
- int chipset;
- int sgram;
+ __struct_group(/* no tag */, always32bit, /* no attrs */,
+ int chipset;
+ int sgram;
- unsigned int maccess;
+ unsigned int maccess;
- unsigned int fb_cpp;
- unsigned int front_offset, front_pitch;
- unsigned int back_offset, back_pitch;
+ unsigned int fb_cpp;
+ unsigned int front_offset, front_pitch;
+ unsigned int back_offset, back_pitch;
- unsigned int depth_cpp;
- unsigned int depth_offset, depth_pitch;
+ unsigned int depth_cpp;
+ unsigned int depth_offset, depth_pitch;
- unsigned int texture_offset[MGA_NR_TEX_HEAPS];
- unsigned int texture_size[MGA_NR_TEX_HEAPS];
+ unsigned int texture_offset[MGA_NR_TEX_HEAPS];
+ unsigned int texture_size[MGA_NR_TEX_HEAPS];
+ );
unsigned long fb_offset;
unsigned long mmio_offset;
diff --git a/original/uapi/drm/msm_drm.h b/original/uapi/drm/msm_drm.h
index a6c1f3e..6b8fffc 100644
--- a/original/uapi/drm/msm_drm.h
+++ b/original/uapi/drm/msm_drm.h
@@ -73,9 +73,18 @@
#define MSM_PARAM_MAX_FREQ 0x04
#define MSM_PARAM_TIMESTAMP 0x05
#define MSM_PARAM_GMEM_BASE 0x06
-#define MSM_PARAM_NR_RINGS 0x07
+#define MSM_PARAM_PRIORITIES 0x07 /* The # of priority levels */
#define MSM_PARAM_PP_PGTABLE 0x08 /* => 1 for per-process pagetables, else 0 */
#define MSM_PARAM_FAULTS 0x09
+#define MSM_PARAM_SUSPENDS 0x0a
+
+/* For backwards compat. The original support for preemption was based on
+ * a single ring per priority level so # of priority levels equals the #
+ * of rings. With drm/scheduler providing additional levels of priority,
+ * the number of priorities is greater than the # of rings. The param is
+ * renamed to better reflect this.
+ */
+#define MSM_PARAM_NR_RINGS MSM_PARAM_PRIORITIES
struct drm_msm_param {
__u32 pipe; /* in, MSM_PIPE_x */
@@ -93,13 +102,12 @@
/* cache modes */
#define MSM_BO_CACHED 0x00010000
#define MSM_BO_WC 0x00020000
-#define MSM_BO_UNCACHED 0x00040000
+#define MSM_BO_UNCACHED 0x00040000 /* deprecated, use MSM_BO_WC */
+#define MSM_BO_CACHED_COHERENT 0x080000
#define MSM_BO_FLAGS (MSM_BO_SCANOUT | \
MSM_BO_GPU_READONLY | \
- MSM_BO_CACHED | \
- MSM_BO_WC | \
- MSM_BO_UNCACHED)
+ MSM_BO_CACHE_MASK)
struct drm_msm_gem_new {
__u64 size; /* in */
@@ -304,6 +312,10 @@
#define MSM_SUBMITQUEUE_FLAGS (0)
+/*
+ * The submitqueue priority should be between 0 and MSM_PARAM_PRIORITIES-1,
+ * a lower numeric value is higher priority.
+ */
struct drm_msm_submitqueue {
__u32 flags; /* in, MSM_SUBMITQUEUE_x */
__u32 prio; /* in, Priority level */
diff --git a/original/uapi/drm/panfrost_drm.h b/original/uapi/drm/panfrost_drm.h
index ec19db1..061e700 100644
--- a/original/uapi/drm/panfrost_drm.h
+++ b/original/uapi/drm/panfrost_drm.h
@@ -171,6 +171,7 @@
DRM_PANFROST_PARAM_JS_FEATURES15,
DRM_PANFROST_PARAM_NR_CORE_GROUPS,
DRM_PANFROST_PARAM_THREAD_TLS_ALLOC,
+ DRM_PANFROST_PARAM_AFBC_FEATURES,
};
struct drm_panfrost_get_param {
diff --git a/original/uapi/drm/tegra_drm.h b/original/uapi/drm/tegra_drm.h
index c4df3c3..94cfc30 100644
--- a/original/uapi/drm/tegra_drm.h
+++ b/original/uapi/drm/tegra_drm.h
@@ -1,24 +1,5 @@
-/*
- * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+/* SPDX-License-Identifier: MIT */
+/* Copyright (c) 2012-2020 NVIDIA Corporation */
#ifndef _UAPI_TEGRA_DRM_H_
#define _UAPI_TEGRA_DRM_H_
@@ -29,6 +10,8 @@
extern "C" {
#endif
+/* Tegra DRM legacy UAPI. Only enabled with STAGING */
+
#define DRM_TEGRA_GEM_CREATE_TILED (1 << 0)
#define DRM_TEGRA_GEM_CREATE_BOTTOM_UP (1 << 1)
@@ -649,8 +632,8 @@
#define DRM_TEGRA_SYNCPT_READ 0x02
#define DRM_TEGRA_SYNCPT_INCR 0x03
#define DRM_TEGRA_SYNCPT_WAIT 0x04
-#define DRM_TEGRA_OPEN_CHANNEL 0x05
-#define DRM_TEGRA_CLOSE_CHANNEL 0x06
+#define DRM_TEGRA_OPEN_CHANNEL 0x05
+#define DRM_TEGRA_CLOSE_CHANNEL 0x06
#define DRM_TEGRA_GET_SYNCPT 0x07
#define DRM_TEGRA_SUBMIT 0x08
#define DRM_TEGRA_GET_SYNCPT_BASE 0x09
@@ -674,6 +657,402 @@
#define DRM_IOCTL_TEGRA_GEM_SET_FLAGS DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_SET_FLAGS, struct drm_tegra_gem_set_flags)
#define DRM_IOCTL_TEGRA_GEM_GET_FLAGS DRM_IOWR(DRM_COMMAND_BASE + DRM_TEGRA_GEM_GET_FLAGS, struct drm_tegra_gem_get_flags)
+/* New Tegra DRM UAPI */
+
+/*
+ * Reported by the driver in the `capabilities` field.
+ *
+ * DRM_TEGRA_CHANNEL_CAP_CACHE_COHERENT: If set, the engine is cache coherent
+ * with regard to the system memory.
+ */
+#define DRM_TEGRA_CHANNEL_CAP_CACHE_COHERENT (1 << 0)
+
+struct drm_tegra_channel_open {
+ /**
+ * @host1x_class: [in]
+ *
+ * Host1x class of the engine that will be programmed using this
+ * channel.
+ */
+ __u32 host1x_class;
+
+ /**
+ * @flags: [in]
+ *
+ * Flags.
+ */
+ __u32 flags;
+
+ /**
+ * @context: [out]
+ *
+ * Opaque identifier corresponding to the opened channel.
+ */
+ __u32 context;
+
+ /**
+ * @version: [out]
+ *
+ * Version of the engine hardware. This can be used by userspace
+ * to determine how the engine needs to be programmed.
+ */
+ __u32 version;
+
+ /**
+ * @capabilities: [out]
+ *
+ * Flags describing the hardware capabilities.
+ */
+ __u32 capabilities;
+ __u32 padding;
+};
+
+struct drm_tegra_channel_close {
+ /**
+ * @context: [in]
+ *
+ * Identifier of the channel to close.
+ */
+ __u32 context;
+ __u32 padding;
+};
+
+/*
+ * Mapping flags that can be used to influence how the mapping is created.
+ *
+ * DRM_TEGRA_CHANNEL_MAP_READ: create mapping that allows HW read access
+ * DRM_TEGRA_CHANNEL_MAP_WRITE: create mapping that allows HW write access
+ */
+#define DRM_TEGRA_CHANNEL_MAP_READ (1 << 0)
+#define DRM_TEGRA_CHANNEL_MAP_WRITE (1 << 1)
+#define DRM_TEGRA_CHANNEL_MAP_READ_WRITE (DRM_TEGRA_CHANNEL_MAP_READ | \
+ DRM_TEGRA_CHANNEL_MAP_WRITE)
+
+struct drm_tegra_channel_map {
+ /**
+ * @context: [in]
+ *
+ * Identifier of the channel to which make memory available for.
+ */
+ __u32 context;
+
+ /**
+ * @handle: [in]
+ *
+ * GEM handle of the memory to map.
+ */
+ __u32 handle;
+
+ /**
+ * @flags: [in]
+ *
+ * Flags.
+ */
+ __u32 flags;
+
+ /**
+ * @mapping: [out]
+ *
+ * Identifier corresponding to the mapping, to be used for
+ * relocations or unmapping later.
+ */
+ __u32 mapping;
+};
+
+struct drm_tegra_channel_unmap {
+ /**
+ * @context: [in]
+ *
+ * Channel identifier of the channel to unmap memory from.
+ */
+ __u32 context;
+
+ /**
+ * @mapping: [in]
+ *
+ * Mapping identifier of the memory mapping to unmap.
+ */
+ __u32 mapping;
+};
+
+/* Submission */
+
+/**
+ * Specify that bit 39 of the patched-in address should be set to switch
+ * swizzling between Tegra and non-Tegra sector layout on systems that store
+ * surfaces in system memory in non-Tegra sector layout.
+ */
+#define DRM_TEGRA_SUBMIT_RELOC_SECTOR_LAYOUT (1 << 0)
+
+struct drm_tegra_submit_buf {
+ /**
+ * @mapping: [in]
+ *
+ * Identifier of the mapping to use in the submission.
+ */
+ __u32 mapping;
+
+ /**
+ * @flags: [in]
+ *
+ * Flags.
+ */
+ __u32 flags;
+
+ /**
+ * Information for relocation patching.
+ */
+ struct {
+ /**
+ * @target_offset: [in]
+ *
+ * Offset from the start of the mapping of the data whose
+ * address is to be patched into the gather.
+ */
+ __u64 target_offset;
+
+ /**
+ * @gather_offset_words: [in]
+ *
+ * Offset in words from the start of the gather data to
+ * where the address should be patched into.
+ */
+ __u32 gather_offset_words;
+
+ /**
+ * @shift: [in]
+ *
+ * Number of bits the address should be shifted right before
+ * patching in.
+ */
+ __u32 shift;
+ } reloc;
+};
+
+/**
+ * Execute `words` words of Host1x opcodes specified in the `gather_data_ptr`
+ * buffer. Each GATHER_UPTR command uses successive words from the buffer.
+ */
+#define DRM_TEGRA_SUBMIT_CMD_GATHER_UPTR 0
+/**
+ * Wait for a syncpoint to reach a value before continuing with further
+ * commands.
+ */
+#define DRM_TEGRA_SUBMIT_CMD_WAIT_SYNCPT 1
+/**
+ * Wait for a syncpoint to reach a value before continuing with further
+ * commands. The threshold is calculated relative to the start of the job.
+ */
+#define DRM_TEGRA_SUBMIT_CMD_WAIT_SYNCPT_RELATIVE 2
+
+struct drm_tegra_submit_cmd_gather_uptr {
+ __u32 words;
+ __u32 reserved[3];
+};
+
+struct drm_tegra_submit_cmd_wait_syncpt {
+ __u32 id;
+ __u32 value;
+ __u32 reserved[2];
+};
+
+struct drm_tegra_submit_cmd {
+ /**
+ * @type: [in]
+ *
+ * Command type to execute. One of the DRM_TEGRA_SUBMIT_CMD*
+ * defines.
+ */
+ __u32 type;
+
+ /**
+ * @flags: [in]
+ *
+ * Flags.
+ */
+ __u32 flags;
+
+ union {
+ struct drm_tegra_submit_cmd_gather_uptr gather_uptr;
+ struct drm_tegra_submit_cmd_wait_syncpt wait_syncpt;
+ __u32 reserved[4];
+ };
+};
+
+struct drm_tegra_submit_syncpt {
+ /**
+ * @id: [in]
+ *
+ * ID of the syncpoint that the job will increment.
+ */
+ __u32 id;
+
+ /**
+ * @flags: [in]
+ *
+ * Flags.
+ */
+ __u32 flags;
+
+ /**
+ * @increments: [in]
+ *
+ * Number of times the job will increment this syncpoint.
+ */
+ __u32 increments;
+
+ /**
+ * @value: [out]
+ *
+ * Value the syncpoint will have once the job has completed all
+ * its specified syncpoint increments.
+ *
+ * Note that the kernel may increment the syncpoint before or after
+ * the job. These increments are not reflected in this field.
+ *
+ * If the job hangs or times out, not all of the increments may
+ * get executed.
+ */
+ __u32 value;
+};
+
+struct drm_tegra_channel_submit {
+ /**
+ * @context: [in]
+ *
+ * Identifier of the channel to submit this job to.
+ */
+ __u32 context;
+
+ /**
+ * @num_bufs: [in]
+ *
+ * Number of elements in the `bufs_ptr` array.
+ */
+ __u32 num_bufs;
+
+ /**
+ * @num_cmds: [in]
+ *
+ * Number of elements in the `cmds_ptr` array.
+ */
+ __u32 num_cmds;
+
+ /**
+ * @gather_data_words: [in]
+ *
+ * Number of 32-bit words in the `gather_data_ptr` array.
+ */
+ __u32 gather_data_words;
+
+ /**
+ * @bufs_ptr: [in]
+ *
+ * Pointer to an array of drm_tegra_submit_buf structures.
+ */
+ __u64 bufs_ptr;
+
+ /**
+ * @cmds_ptr: [in]
+ *
+ * Pointer to an array of drm_tegra_submit_cmd structures.
+ */
+ __u64 cmds_ptr;
+
+ /**
+ * @gather_data_ptr: [in]
+ *
+ * Pointer to an array of Host1x opcodes to be used by GATHER_UPTR
+ * commands.
+ */
+ __u64 gather_data_ptr;
+
+ /**
+ * @syncobj_in: [in]
+ *
+ * Handle for DRM syncobj that will be waited before submission.
+ * Ignored if zero.
+ */
+ __u32 syncobj_in;
+
+ /**
+ * @syncobj_out: [in]
+ *
+ * Handle for DRM syncobj that will have its fence replaced with
+ * the job's completion fence. Ignored if zero.
+ */
+ __u32 syncobj_out;
+
+ /**
+ * @syncpt_incr: [in,out]
+ *
+ * Information about the syncpoint the job will increment.
+ */
+ struct drm_tegra_submit_syncpt syncpt;
+};
+
+struct drm_tegra_syncpoint_allocate {
+ /**
+ * @id: [out]
+ *
+ * ID of allocated syncpoint.
+ */
+ __u32 id;
+ __u32 padding;
+};
+
+struct drm_tegra_syncpoint_free {
+ /**
+ * @id: [in]
+ *
+ * ID of syncpoint to free.
+ */
+ __u32 id;
+ __u32 padding;
+};
+
+struct drm_tegra_syncpoint_wait {
+ /**
+ * @timeout: [in]
+ *
+ * Absolute timestamp at which the wait will time out.
+ */
+ __s64 timeout_ns;
+
+ /**
+ * @id: [in]
+ *
+ * ID of syncpoint to wait on.
+ */
+ __u32 id;
+
+ /**
+ * @threshold: [in]
+ *
+ * Threshold to wait for.
+ */
+ __u32 threshold;
+
+ /**
+ * @value: [out]
+ *
+ * Value of the syncpoint upon wait completion.
+ */
+ __u32 value;
+
+ __u32 padding;
+};
+
+#define DRM_IOCTL_TEGRA_CHANNEL_OPEN DRM_IOWR(DRM_COMMAND_BASE + 0x10, struct drm_tegra_channel_open)
+#define DRM_IOCTL_TEGRA_CHANNEL_CLOSE DRM_IOWR(DRM_COMMAND_BASE + 0x11, struct drm_tegra_channel_close)
+#define DRM_IOCTL_TEGRA_CHANNEL_MAP DRM_IOWR(DRM_COMMAND_BASE + 0x12, struct drm_tegra_channel_map)
+#define DRM_IOCTL_TEGRA_CHANNEL_UNMAP DRM_IOWR(DRM_COMMAND_BASE + 0x13, struct drm_tegra_channel_unmap)
+#define DRM_IOCTL_TEGRA_CHANNEL_SUBMIT DRM_IOWR(DRM_COMMAND_BASE + 0x14, struct drm_tegra_channel_submit)
+
+#define DRM_IOCTL_TEGRA_SYNCPOINT_ALLOCATE DRM_IOWR(DRM_COMMAND_BASE + 0x20, struct drm_tegra_syncpoint_allocate)
+#define DRM_IOCTL_TEGRA_SYNCPOINT_FREE DRM_IOWR(DRM_COMMAND_BASE + 0x21, struct drm_tegra_syncpoint_free)
+#define DRM_IOCTL_TEGRA_SYNCPOINT_WAIT DRM_IOWR(DRM_COMMAND_BASE + 0x22, struct drm_tegra_syncpoint_wait)
+
#if defined(__cplusplus)
}
#endif
diff --git a/original/uapi/drm/v3d_drm.h b/original/uapi/drm/v3d_drm.h
index 1ce746e..3dfc0af 100644
--- a/original/uapi/drm/v3d_drm.h
+++ b/original/uapi/drm/v3d_drm.h
@@ -38,6 +38,9 @@
#define DRM_V3D_GET_BO_OFFSET 0x05
#define DRM_V3D_SUBMIT_TFU 0x06
#define DRM_V3D_SUBMIT_CSD 0x07
+#define DRM_V3D_PERFMON_CREATE 0x08
+#define DRM_V3D_PERFMON_DESTROY 0x09
+#define DRM_V3D_PERFMON_GET_VALUES 0x0a
#define DRM_IOCTL_V3D_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl)
#define DRM_IOCTL_V3D_WAIT_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo)
@@ -47,8 +50,75 @@
#define DRM_IOCTL_V3D_GET_BO_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_BO_OFFSET, struct drm_v3d_get_bo_offset)
#define DRM_IOCTL_V3D_SUBMIT_TFU DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_TFU, struct drm_v3d_submit_tfu)
#define DRM_IOCTL_V3D_SUBMIT_CSD DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CSD, struct drm_v3d_submit_csd)
+#define DRM_IOCTL_V3D_PERFMON_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_CREATE, \
+ struct drm_v3d_perfmon_create)
+#define DRM_IOCTL_V3D_PERFMON_DESTROY DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_DESTROY, \
+ struct drm_v3d_perfmon_destroy)
+#define DRM_IOCTL_V3D_PERFMON_GET_VALUES DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_GET_VALUES, \
+ struct drm_v3d_perfmon_get_values)
#define DRM_V3D_SUBMIT_CL_FLUSH_CACHE 0x01
+#define DRM_V3D_SUBMIT_EXTENSION 0x02
+
+/* struct drm_v3d_extension - ioctl extensions
+ *
+ * Linked-list of generic extensions where the id identify which struct is
+ * pointed by ext_data. Therefore, DRM_V3D_EXT_ID_* is used on id to identify
+ * the extension type.
+ */
+struct drm_v3d_extension {
+ __u64 next;
+ __u32 id;
+#define DRM_V3D_EXT_ID_MULTI_SYNC 0x01
+ __u32 flags; /* mbz */
+};
+
+/* struct drm_v3d_sem - wait/signal semaphore
+ *
+ * If binary semaphore, it only takes syncobj handle and ignores flags and
+ * point fields. Point is defined for timeline syncobj feature.
+ */
+struct drm_v3d_sem {
+ __u32 handle; /* syncobj */
+ /* rsv below, for future uses */
+ __u32 flags;
+ __u64 point; /* for timeline sem support */
+ __u64 mbz[2]; /* must be zero, rsv */
+};
+
+/* Enum for each of the V3D queues. */
+enum v3d_queue {
+ V3D_BIN,
+ V3D_RENDER,
+ V3D_TFU,
+ V3D_CSD,
+ V3D_CACHE_CLEAN,
+};
+
+/**
+ * struct drm_v3d_multi_sync - ioctl extension to add support multiples
+ * syncobjs for commands submission.
+ *
+ * When an extension of DRM_V3D_EXT_ID_MULTI_SYNC id is defined, it points to
+ * this extension to define wait and signal dependencies, instead of single
+ * in/out sync entries on submitting commands. The field flags is used to
+ * determine the stage to set wait dependencies.
+ */
+struct drm_v3d_multi_sync {
+ struct drm_v3d_extension base;
+ /* Array of wait and signal semaphores */
+ __u64 in_syncs;
+ __u64 out_syncs;
+
+ /* Number of entries */
+ __u32 in_sync_count;
+ __u32 out_sync_count;
+
+ /* set the stage (v3d_queue) to sync */
+ __u32 wait_stage;
+
+ __u32 pad; /* mbz */
+};
/**
* struct drm_v3d_submit_cl - ioctl argument for submitting commands to the 3D
@@ -126,7 +196,16 @@
/* Number of BO handles passed in (size is that times 4). */
__u32 bo_handle_count;
+ /* DRM_V3D_SUBMIT_* properties */
__u32 flags;
+
+ /* ID of the perfmon to attach to this job. 0 means no perfmon. */
+ __u32 perfmon_id;
+
+ __u32 pad;
+
+ /* Pointer to an array of ioctl extensions*/
+ __u64 extensions;
};
/**
@@ -195,6 +274,8 @@
DRM_V3D_PARAM_SUPPORTS_TFU,
DRM_V3D_PARAM_SUPPORTS_CSD,
DRM_V3D_PARAM_SUPPORTS_CACHE_FLUSH,
+ DRM_V3D_PARAM_SUPPORTS_PERFMON,
+ DRM_V3D_PARAM_SUPPORTS_MULTISYNC_EXT,
};
struct drm_v3d_get_param {
@@ -233,6 +314,11 @@
__u32 in_sync;
/* Sync object to signal when the TFU job is done. */
__u32 out_sync;
+
+ __u32 flags;
+
+ /* Pointer to an array of ioctl extensions*/
+ __u64 extensions;
};
/* Submits a compute shader for dispatch. This job will block on any
@@ -258,6 +344,134 @@
__u32 in_sync;
/* Sync object to signal when the CSD job is done. */
__u32 out_sync;
+
+ /* ID of the perfmon to attach to this job. 0 means no perfmon. */
+ __u32 perfmon_id;
+
+ /* Pointer to an array of ioctl extensions*/
+ __u64 extensions;
+
+ __u32 flags;
+
+ __u32 pad;
+};
+
+enum {
+ V3D_PERFCNT_FEP_VALID_PRIMTS_NO_PIXELS,
+ V3D_PERFCNT_FEP_VALID_PRIMS,
+ V3D_PERFCNT_FEP_EZ_NFCLIP_QUADS,
+ V3D_PERFCNT_FEP_VALID_QUADS,
+ V3D_PERFCNT_TLB_QUADS_STENCIL_FAIL,
+ V3D_PERFCNT_TLB_QUADS_STENCILZ_FAIL,
+ V3D_PERFCNT_TLB_QUADS_STENCILZ_PASS,
+ V3D_PERFCNT_TLB_QUADS_ZERO_COV,
+ V3D_PERFCNT_TLB_QUADS_NONZERO_COV,
+ V3D_PERFCNT_TLB_QUADS_WRITTEN,
+ V3D_PERFCNT_PTB_PRIM_VIEWPOINT_DISCARD,
+ V3D_PERFCNT_PTB_PRIM_CLIP,
+ V3D_PERFCNT_PTB_PRIM_REV,
+ V3D_PERFCNT_QPU_IDLE_CYCLES,
+ V3D_PERFCNT_QPU_ACTIVE_CYCLES_VERTEX_COORD_USER,
+ V3D_PERFCNT_QPU_ACTIVE_CYCLES_FRAG,
+ V3D_PERFCNT_QPU_CYCLES_VALID_INSTR,
+ V3D_PERFCNT_QPU_CYCLES_TMU_STALL,
+ V3D_PERFCNT_QPU_CYCLES_SCOREBOARD_STALL,
+ V3D_PERFCNT_QPU_CYCLES_VARYINGS_STALL,
+ V3D_PERFCNT_QPU_IC_HIT,
+ V3D_PERFCNT_QPU_IC_MISS,
+ V3D_PERFCNT_QPU_UC_HIT,
+ V3D_PERFCNT_QPU_UC_MISS,
+ V3D_PERFCNT_TMU_TCACHE_ACCESS,
+ V3D_PERFCNT_TMU_TCACHE_MISS,
+ V3D_PERFCNT_VPM_VDW_STALL,
+ V3D_PERFCNT_VPM_VCD_STALL,
+ V3D_PERFCNT_BIN_ACTIVE,
+ V3D_PERFCNT_RDR_ACTIVE,
+ V3D_PERFCNT_L2T_HITS,
+ V3D_PERFCNT_L2T_MISSES,
+ V3D_PERFCNT_CYCLE_COUNT,
+ V3D_PERFCNT_QPU_CYCLES_STALLED_VERTEX_COORD_USER,
+ V3D_PERFCNT_QPU_CYCLES_STALLED_FRAGMENT,
+ V3D_PERFCNT_PTB_PRIMS_BINNED,
+ V3D_PERFCNT_AXI_WRITES_WATCH_0,
+ V3D_PERFCNT_AXI_READS_WATCH_0,
+ V3D_PERFCNT_AXI_WRITE_STALLS_WATCH_0,
+ V3D_PERFCNT_AXI_READ_STALLS_WATCH_0,
+ V3D_PERFCNT_AXI_WRITE_BYTES_WATCH_0,
+ V3D_PERFCNT_AXI_READ_BYTES_WATCH_0,
+ V3D_PERFCNT_AXI_WRITES_WATCH_1,
+ V3D_PERFCNT_AXI_READS_WATCH_1,
+ V3D_PERFCNT_AXI_WRITE_STALLS_WATCH_1,
+ V3D_PERFCNT_AXI_READ_STALLS_WATCH_1,
+ V3D_PERFCNT_AXI_WRITE_BYTES_WATCH_1,
+ V3D_PERFCNT_AXI_READ_BYTES_WATCH_1,
+ V3D_PERFCNT_TLB_PARTIAL_QUADS,
+ V3D_PERFCNT_TMU_CONFIG_ACCESSES,
+ V3D_PERFCNT_L2T_NO_ID_STALL,
+ V3D_PERFCNT_L2T_COM_QUE_STALL,
+ V3D_PERFCNT_L2T_TMU_WRITES,
+ V3D_PERFCNT_TMU_ACTIVE_CYCLES,
+ V3D_PERFCNT_TMU_STALLED_CYCLES,
+ V3D_PERFCNT_CLE_ACTIVE,
+ V3D_PERFCNT_L2T_TMU_READS,
+ V3D_PERFCNT_L2T_CLE_READS,
+ V3D_PERFCNT_L2T_VCD_READS,
+ V3D_PERFCNT_L2T_TMUCFG_READS,
+ V3D_PERFCNT_L2T_SLC0_READS,
+ V3D_PERFCNT_L2T_SLC1_READS,
+ V3D_PERFCNT_L2T_SLC2_READS,
+ V3D_PERFCNT_L2T_TMU_W_MISSES,
+ V3D_PERFCNT_L2T_TMU_R_MISSES,
+ V3D_PERFCNT_L2T_CLE_MISSES,
+ V3D_PERFCNT_L2T_VCD_MISSES,
+ V3D_PERFCNT_L2T_TMUCFG_MISSES,
+ V3D_PERFCNT_L2T_SLC0_MISSES,
+ V3D_PERFCNT_L2T_SLC1_MISSES,
+ V3D_PERFCNT_L2T_SLC2_MISSES,
+ V3D_PERFCNT_CORE_MEM_WRITES,
+ V3D_PERFCNT_L2T_MEM_WRITES,
+ V3D_PERFCNT_PTB_MEM_WRITES,
+ V3D_PERFCNT_TLB_MEM_WRITES,
+ V3D_PERFCNT_CORE_MEM_READS,
+ V3D_PERFCNT_L2T_MEM_READS,
+ V3D_PERFCNT_PTB_MEM_READS,
+ V3D_PERFCNT_PSE_MEM_READS,
+ V3D_PERFCNT_TLB_MEM_READS,
+ V3D_PERFCNT_GMP_MEM_READS,
+ V3D_PERFCNT_PTB_W_MEM_WORDS,
+ V3D_PERFCNT_TLB_W_MEM_WORDS,
+ V3D_PERFCNT_PSE_R_MEM_WORDS,
+ V3D_PERFCNT_TLB_R_MEM_WORDS,
+ V3D_PERFCNT_TMU_MRU_HITS,
+ V3D_PERFCNT_COMPUTE_ACTIVE,
+ V3D_PERFCNT_NUM,
+};
+
+#define DRM_V3D_MAX_PERF_COUNTERS 32
+
+struct drm_v3d_perfmon_create {
+ __u32 id;
+ __u32 ncounters;
+ __u8 counters[DRM_V3D_MAX_PERF_COUNTERS];
+};
+
+struct drm_v3d_perfmon_destroy {
+ __u32 id;
+};
+
+/*
+ * Returns the values of the performance counters tracked by this
+ * perfmon (as an array of ncounters u64 values).
+ *
+ * No implicit synchronization is performed, so the user has to
+ * guarantee that any jobs using this perfmon have already been
+ * completed (probably by blocking on the seqno returned by the
+ * last exec that used the perfmon).
+ */
+struct drm_v3d_perfmon_get_values {
+ __u32 id;
+ __u32 pad;
+ __u64 values_ptr;
};
#if defined(__cplusplus)
diff --git a/original/uapi/drm/virtgpu_drm.h b/original/uapi/drm/virtgpu_drm.h
index b9ec26e..0512fde 100644
--- a/original/uapi/drm/virtgpu_drm.h
+++ b/original/uapi/drm/virtgpu_drm.h
@@ -47,12 +47,15 @@
#define DRM_VIRTGPU_WAIT 0x08
#define DRM_VIRTGPU_GET_CAPS 0x09
#define DRM_VIRTGPU_RESOURCE_CREATE_BLOB 0x0a
+#define DRM_VIRTGPU_CONTEXT_INIT 0x0b
#define VIRTGPU_EXECBUF_FENCE_FD_IN 0x01
#define VIRTGPU_EXECBUF_FENCE_FD_OUT 0x02
+#define VIRTGPU_EXECBUF_RING_IDX 0x04
#define VIRTGPU_EXECBUF_FLAGS (\
VIRTGPU_EXECBUF_FENCE_FD_IN |\
VIRTGPU_EXECBUF_FENCE_FD_OUT |\
+ VIRTGPU_EXECBUF_RING_IDX |\
0)
struct drm_virtgpu_map {
@@ -68,6 +71,8 @@
__u64 bo_handles;
__u32 num_bo_handles;
__s32 fence_fd; /* in/out fence fd (see VIRTGPU_EXECBUF_FENCE_FD_IN/OUT) */
+ __u32 ring_idx; /* command ring index (see VIRTGPU_EXECBUF_RING_IDX) */
+ __u32 pad;
};
#define VIRTGPU_PARAM_3D_FEATURES 1 /* do we have 3D features in the hw */
@@ -75,6 +80,8 @@
#define VIRTGPU_PARAM_RESOURCE_BLOB 3 /* DRM_VIRTGPU_RESOURCE_CREATE_BLOB */
#define VIRTGPU_PARAM_HOST_VISIBLE 4 /* Host blob resources are mappable */
#define VIRTGPU_PARAM_CROSS_DEVICE 5 /* Cross virtio-device resource sharing */
+#define VIRTGPU_PARAM_CONTEXT_INIT 6 /* DRM_VIRTGPU_CONTEXT_INIT */
+#define VIRTGPU_PARAM_SUPPORTED_CAPSET_IDs 7 /* Bitmask of supported capability set ids */
struct drm_virtgpu_getparam {
__u64 param;
@@ -173,6 +180,29 @@
__u64 blob_id;
};
+#define VIRTGPU_CONTEXT_PARAM_CAPSET_ID 0x0001
+#define VIRTGPU_CONTEXT_PARAM_NUM_RINGS 0x0002
+#define VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK 0x0003
+struct drm_virtgpu_context_set_param {
+ __u64 param;
+ __u64 value;
+};
+
+struct drm_virtgpu_context_init {
+ __u32 num_params;
+ __u32 pad;
+
+ /* pointer to drm_virtgpu_context_set_param array */
+ __u64 ctx_set_params;
+};
+
+/*
+ * Event code that's given when VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK is in
+ * effect. The event size is sizeof(drm_event), since there is no additional
+ * payload.
+ */
+#define VIRTGPU_EVENT_FENCE_SIGNALED 0x90000000
+
#define DRM_IOCTL_VIRTGPU_MAP \
DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_MAP, struct drm_virtgpu_map)
@@ -212,6 +242,10 @@
DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_RESOURCE_CREATE_BLOB, \
struct drm_virtgpu_resource_create_blob)
+#define DRM_IOCTL_VIRTGPU_CONTEXT_INIT \
+ DRM_IOWR(DRM_COMMAND_BASE + DRM_VIRTGPU_CONTEXT_INIT, \
+ struct drm_virtgpu_context_init)
+
#if defined(__cplusplus)
}
#endif
diff --git a/original/uapi/drm/vmwgfx_drm.h b/original/uapi/drm/vmwgfx_drm.h
index 02e9175..8277644 100644
--- a/original/uapi/drm/vmwgfx_drm.h
+++ b/original/uapi/drm/vmwgfx_drm.h
@@ -72,6 +72,9 @@
#define DRM_VMW_GB_SURFACE_CREATE_EXT 27
#define DRM_VMW_GB_SURFACE_REF_EXT 28
#define DRM_VMW_MSG 29
+#define DRM_VMW_MKSSTAT_RESET 30
+#define DRM_VMW_MKSSTAT_ADD 31
+#define DRM_VMW_MKSSTAT_REMOVE 32
/*************************************************************************/
/**
@@ -107,6 +110,7 @@
#define DRM_VMW_PARAM_HW_CAPS2 13
#define DRM_VMW_PARAM_SM4_1 14
#define DRM_VMW_PARAM_SM5 15
+#define DRM_VMW_PARAM_GL43 16
/**
* enum drm_vmw_handle_type - handle type for ref ioctls
@@ -1236,6 +1240,44 @@
__u32 receive_len;
};
+/**
+ * struct drm_vmw_mksstat_add_arg
+ *
+ * @stat: Pointer to user-space stat-counters array, page-aligned.
+ * @info: Pointer to user-space counter-infos array, page-aligned.
+ * @strs: Pointer to user-space stat strings, page-aligned.
+ * @stat_len: Length in bytes of stat-counters array.
+ * @info_len: Length in bytes of counter-infos array.
+ * @strs_len: Length in bytes of the stat strings, terminators included.
+ * @description: Pointer to instance descriptor string; will be truncated
+ * to MKS_GUEST_STAT_INSTANCE_DESC_LENGTH chars.
+ * @id: Output identifier of the produced record; -1 if error.
+ *
+ * Argument to the DRM_VMW_MKSSTAT_ADD ioctl.
+ */
+struct drm_vmw_mksstat_add_arg {
+ __u64 stat;
+ __u64 info;
+ __u64 strs;
+ __u64 stat_len;
+ __u64 info_len;
+ __u64 strs_len;
+ __u64 description;
+ __u64 id;
+};
+
+/**
+ * struct drm_vmw_mksstat_remove_arg
+ *
+ * @id: Identifier of the record being disposed, originally obtained through
+ * DRM_VMW_MKSSTAT_ADD ioctl.
+ *
+ * Argument to the DRM_VMW_MKSSTAT_REMOVE ioctl.
+ */
+struct drm_vmw_mksstat_remove_arg {
+ __u64 id;
+};
+
#if defined(__cplusplus)
}
#endif
diff --git a/original/uapi/linux/acrn.h b/original/uapi/linux/acrn.h
index 353b2a2..ccf47ed 100644
--- a/original/uapi/linux/acrn.h
+++ b/original/uapi/linux/acrn.h
@@ -396,6 +396,7 @@
/* Type of PCI device assignment */
#define ACRN_PTDEV_QUIRK_ASSIGN (1U << 0)
+#define ACRN_MMIODEV_RES_NUM 3
#define ACRN_PCI_NUM_BARS 6
/**
* struct acrn_pcidev - Info for assigning or de-assigning a PCI device
@@ -418,6 +419,67 @@
};
/**
+ * struct acrn_mmiodev - Info for assigning or de-assigning a MMIO device
+ * @name: Name of the MMIO device.
+ * @res[].user_vm_pa: Physical address of User VM of the MMIO region
+ * for the MMIO device.
+ * @res[].service_vm_pa: Physical address of Service VM of the MMIO
+ * region for the MMIO device.
+ * @res[].size: Size of the MMIO region for the MMIO device.
+ * @res[].mem_type: Memory type of the MMIO region for the MMIO
+ * device.
+ *
+ * This structure will be passed to hypervisor directly.
+ */
+struct acrn_mmiodev {
+ __u8 name[8];
+ struct {
+ __u64 user_vm_pa;
+ __u64 service_vm_pa;
+ __u64 size;
+ __u64 mem_type;
+ } res[ACRN_MMIODEV_RES_NUM];
+};
+
+/**
+ * struct acrn_vdev - Info for creating or destroying a virtual device
+ * @id: Union of identifier of the virtual device
+ * @id.value: Raw data of the identifier
+ * @id.fields.vendor: Vendor id of the virtual PCI device
+ * @id.fields.device: Device id of the virtual PCI device
+ * @id.fields.legacy_id: ID of the virtual device if not a PCI device
+ * @slot: Virtual Bus/Device/Function of the virtual
+ * device
+ * @io_base: IO resource base address of the virtual device
+ * @io_size: IO resource size of the virtual device
+ * @args: Arguments for the virtual device creation
+ *
+ * The created virtual device can be a PCI device or a legacy device (e.g.
+ * a virtual UART controller) and it is emulated by the hypervisor. This
+ * structure will be passed to hypervisor directly.
+ */
+struct acrn_vdev {
+ /*
+ * the identifier of the device, the low 32 bits represent the vendor
+ * id and device id of PCI device and the high 32 bits represent the
+ * device number of the legacy device
+ */
+ union {
+ __u64 value;
+ struct {
+ __le16 vendor;
+ __le16 device;
+ __le32 legacy_id;
+ } fields;
+ } id;
+
+ __u64 slot;
+ __u32 io_addr[ACRN_PCI_NUM_BARS];
+ __u32 io_size[ACRN_PCI_NUM_BARS];
+ __u8 args[128];
+};
+
+/**
* struct acrn_msi_entry - Info for injecting a MSI interrupt to a VM
* @msi_addr: MSI addr[19:12] with dest vCPU ID
* @msi_data: MSI data[7:0] with vector
@@ -568,6 +630,14 @@
_IOW(ACRN_IOCTL_TYPE, 0x55, struct acrn_pcidev)
#define ACRN_IOCTL_DEASSIGN_PCIDEV \
_IOW(ACRN_IOCTL_TYPE, 0x56, struct acrn_pcidev)
+#define ACRN_IOCTL_ASSIGN_MMIODEV \
+ _IOW(ACRN_IOCTL_TYPE, 0x57, struct acrn_mmiodev)
+#define ACRN_IOCTL_DEASSIGN_MMIODEV \
+ _IOW(ACRN_IOCTL_TYPE, 0x58, struct acrn_mmiodev)
+#define ACRN_IOCTL_CREATE_VDEV \
+ _IOW(ACRN_IOCTL_TYPE, 0x59, struct acrn_vdev)
+#define ACRN_IOCTL_DESTROY_VDEV \
+ _IOW(ACRN_IOCTL_TYPE, 0x5A, struct acrn_vdev)
#define ACRN_IOCTL_PM_GET_CPU_STATE \
_IOWR(ACRN_IOCTL_TYPE, 0x60, __u64)
diff --git a/original/uapi/linux/amt.h b/original/uapi/linux/amt.h
new file mode 100644
index 0000000..2dccff4
--- /dev/null
+++ b/original/uapi/linux/amt.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+/*
+ * Copyright (c) 2021 Taehee Yoo <ap420073@gmail.com>
+ */
+#ifndef _UAPI_AMT_H_
+#define _UAPI_AMT_H_
+
+enum ifla_amt_mode {
+ /* AMT interface works as Gateway mode.
+ * The Gateway mode encapsulates IGMP/MLD traffic and decapsulates
+ * multicast traffic.
+ */
+ AMT_MODE_GATEWAY = 0,
+ /* AMT interface works as Relay mode.
+ * The Relay mode encapsulates multicast traffic and decapsulates
+ * IGMP/MLD traffic.
+ */
+ AMT_MODE_RELAY,
+ __AMT_MODE_MAX,
+};
+
+#define AMT_MODE_MAX (__AMT_MODE_MAX - 1)
+
+enum {
+ IFLA_AMT_UNSPEC,
+ /* This attribute specify mode etier Gateway or Relay. */
+ IFLA_AMT_MODE,
+ /* This attribute specify Relay port.
+ * AMT interface is created as Gateway mode, this attribute is used
+ * to specify relay(remote) port.
+ * AMT interface is created as Relay mode, this attribute is used
+ * as local port.
+ */
+ IFLA_AMT_RELAY_PORT,
+ /* This attribute specify Gateway port.
+ * AMT interface is created as Gateway mode, this attribute is used
+ * as local port.
+ * AMT interface is created as Relay mode, this attribute is not used.
+ */
+ IFLA_AMT_GATEWAY_PORT,
+ /* This attribute specify physical device */
+ IFLA_AMT_LINK,
+ /* This attribute specify local ip address */
+ IFLA_AMT_LOCAL_IP,
+ /* This attribute specify Relay ip address.
+ * So, this is not used by Relay.
+ */
+ IFLA_AMT_REMOTE_IP,
+ /* This attribute specify Discovery ip address.
+ * When Gateway get started, it send discovery message to find the
+ * Relay's ip address.
+ * So, this is not used by Relay.
+ */
+ IFLA_AMT_DISCOVERY_IP,
+ /* This attribute specify number of maximum tunnel. */
+ IFLA_AMT_MAX_TUNNELS,
+ __IFLA_AMT_MAX,
+};
+
+#define IFLA_AMT_MAX (__IFLA_AMT_MAX - 1)
+
+#endif /* _UAPI_AMT_H_ */
diff --git a/original/uapi/linux/android/binder.h b/original/uapi/linux/android/binder.h
index 8e5b929..2d3f015 100644
--- a/original/uapi/linux/android/binder.h
+++ b/original/uapi/linux/android/binder.h
@@ -265,6 +265,25 @@
__u32 reserved3;
};
+struct binder_freeze_info {
+ __u32 pid;
+ __u32 enable;
+ __u32 timeout_ms;
+};
+
+struct binder_frozen_status_info {
+ __u32 pid;
+
+ /* process received sync transactions since last frozen
+ * bit 0: received sync transaction after being frozen
+ * bit 1: new pending sync transaction during freezing
+ */
+ __u32 sync_recv;
+
+ /* process received async transactions since last frozen */
+ __u32 async_recv;
+};
+
#define BINDER_WRITE_READ _IOWR('b', 1, struct binder_write_read)
#define BINDER_SET_IDLE_TIMEOUT _IOW('b', 3, __s64)
#define BINDER_SET_MAX_THREADS _IOW('b', 5, __u32)
@@ -275,6 +294,9 @@
#define BINDER_GET_NODE_DEBUG_INFO _IOWR('b', 11, struct binder_node_debug_info)
#define BINDER_GET_NODE_INFO_FOR_REF _IOWR('b', 12, struct binder_node_info_for_ref)
#define BINDER_SET_CONTEXT_MGR_EXT _IOW('b', 13, struct flat_binder_object)
+#define BINDER_FREEZE _IOW('b', 14, struct binder_freeze_info)
+#define BINDER_GET_FROZEN_INFO _IOWR('b', 15, struct binder_frozen_status_info)
+#define BINDER_ENABLE_ONEWAY_SPAM_DETECTION _IOW('b', 16, __u32)
/*
* NOTE: Two special error codes you should check for when calling
@@ -456,6 +478,19 @@
* The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
+
+ BR_FROZEN_REPLY = _IO('r', 18),
+ /*
+ * The target of the last transaction (either a bcTRANSACTION or
+ * a bcATTEMPT_ACQUIRE) is frozen. No parameters.
+ */
+
+ BR_ONEWAY_SPAM_SUSPECT = _IO('r', 19),
+ /*
+ * Current process sent too many oneway calls to target, and the last
+ * asynchronous transaction makes the allocated async buffer size exceed
+ * detection threshold. No parameters.
+ */
};
enum binder_driver_command_protocol {
diff --git a/original/uapi/linux/ashmem.h b/original/uapi/linux/ashmem.h
index 5442e00..134efac 100644
--- a/original/uapi/linux/ashmem.h
+++ b/original/uapi/linux/ashmem.h
@@ -1,7 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0 OR Apache-2.0 */
/*
- * drivers/staging/android/uapi/ashmem.h
- *
* Copyright 2008 Google Inc.
* Author: Robert Love
*/
diff --git a/original/uapi/linux/audit.h b/original/uapi/linux/audit.h
index cd2d827..8eda133 100644
--- a/original/uapi/linux/audit.h
+++ b/original/uapi/linux/audit.h
@@ -48,7 +48,7 @@
* 2500 - 2999 future user space (maybe integrity labels and related events)
*
* Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
- * exclusively user space. 1300-2099 is kernel --> user space
+ * exclusively user space. 1300-2099 is kernel --> user space
* communication.
*/
#define AUDIT_GET 1000 /* Get status */
@@ -78,7 +78,7 @@
#define AUDIT_LAST_USER_MSG 1199
#define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */
#define AUDIT_LAST_USER_MSG2 2999
-
+
#define AUDIT_DAEMON_START 1200 /* Daemon startup record */
#define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */
#define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */
@@ -118,6 +118,10 @@
#define AUDIT_TIME_ADJNTPVAL 1333 /* NTP value adjustment */
#define AUDIT_BPF 1334 /* BPF subsystem */
#define AUDIT_EVENT_LISTENER 1335 /* Task joined multicast read socket */
+#define AUDIT_URINGOP 1336 /* io_uring operation */
+#define AUDIT_OPENAT2 1337 /* Record showing openat2 how args */
+#define AUDIT_DM_CTRL 1338 /* Device Mapper target control */
+#define AUDIT_DM_EVENT 1339 /* Device Mapper events */
#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */
#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */
@@ -166,8 +170,9 @@
#define AUDIT_FILTER_EXCLUDE 0x05 /* Apply rule before record creation */
#define AUDIT_FILTER_TYPE AUDIT_FILTER_EXCLUDE /* obsolete misleading naming */
#define AUDIT_FILTER_FS 0x06 /* Apply rule at __audit_inode_child */
+#define AUDIT_FILTER_URING_EXIT 0x07 /* Apply rule at io_uring op exit */
-#define AUDIT_NR_FILTERS 7
+#define AUDIT_NR_FILTERS 8
#define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */
@@ -509,7 +514,7 @@
__u32 values[AUDIT_MAX_FIELDS];
__u32 fieldflags[AUDIT_MAX_FIELDS];
__u32 buflen; /* total length of string fields */
- char buf[0]; /* string fields buffer */
+ char buf[]; /* string fields buffer */
};
#endif /* _UAPI_LINUX_AUDIT_H_ */
diff --git a/original/uapi/linux/auxvec.h b/original/uapi/linux/auxvec.h
index abe5f2b..c7e502b 100644
--- a/original/uapi/linux/auxvec.h
+++ b/original/uapi/linux/auxvec.h
@@ -33,5 +33,8 @@
#define AT_EXECFN 31 /* filename of program */
+#ifndef AT_MINSIGSTKSZ
+#define AT_MINSIGSTKSZ 51 /* minimal stack size for signal delivery */
+#endif
#endif /* _UAPI_LINUX_AUXVEC_H */
diff --git a/original/uapi/linux/bcache.h b/original/uapi/linux/bcache.h
deleted file mode 100644
index cf7399f..0000000
--- a/original/uapi/linux/bcache.h
+++ /dev/null
@@ -1,445 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _LINUX_BCACHE_H
-#define _LINUX_BCACHE_H
-
-/*
- * Bcache on disk data structures
- */
-
-#include <linux/types.h>
-
-#define BITMASK(name, type, field, offset, size) \
-static inline __u64 name(const type *k) \
-{ return (k->field >> offset) & ~(~0ULL << size); } \
- \
-static inline void SET_##name(type *k, __u64 v) \
-{ \
- k->field &= ~(~(~0ULL << size) << offset); \
- k->field |= (v & ~(~0ULL << size)) << offset; \
-}
-
-/* Btree keys - all units are in sectors */
-
-struct bkey {
- __u64 high;
- __u64 low;
- __u64 ptr[];
-};
-
-#define KEY_FIELD(name, field, offset, size) \
- BITMASK(name, struct bkey, field, offset, size)
-
-#define PTR_FIELD(name, offset, size) \
-static inline __u64 name(const struct bkey *k, unsigned int i) \
-{ return (k->ptr[i] >> offset) & ~(~0ULL << size); } \
- \
-static inline void SET_##name(struct bkey *k, unsigned int i, __u64 v) \
-{ \
- k->ptr[i] &= ~(~(~0ULL << size) << offset); \
- k->ptr[i] |= (v & ~(~0ULL << size)) << offset; \
-}
-
-#define KEY_SIZE_BITS 16
-#define KEY_MAX_U64S 8
-
-KEY_FIELD(KEY_PTRS, high, 60, 3)
-KEY_FIELD(HEADER_SIZE, high, 58, 2)
-KEY_FIELD(KEY_CSUM, high, 56, 2)
-KEY_FIELD(KEY_PINNED, high, 55, 1)
-KEY_FIELD(KEY_DIRTY, high, 36, 1)
-
-KEY_FIELD(KEY_SIZE, high, 20, KEY_SIZE_BITS)
-KEY_FIELD(KEY_INODE, high, 0, 20)
-
-/* Next time I change the on disk format, KEY_OFFSET() won't be 64 bits */
-
-static inline __u64 KEY_OFFSET(const struct bkey *k)
-{
- return k->low;
-}
-
-static inline void SET_KEY_OFFSET(struct bkey *k, __u64 v)
-{
- k->low = v;
-}
-
-/*
- * The high bit being set is a relic from when we used it to do binary
- * searches - it told you where a key started. It's not used anymore,
- * and can probably be safely dropped.
- */
-#define KEY(inode, offset, size) \
-((struct bkey) { \
- .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode), \
- .low = (offset) \
-})
-
-#define ZERO_KEY KEY(0, 0, 0)
-
-#define MAX_KEY_INODE (~(~0 << 20))
-#define MAX_KEY_OFFSET (~0ULL >> 1)
-#define MAX_KEY KEY(MAX_KEY_INODE, MAX_KEY_OFFSET, 0)
-
-#define KEY_START(k) (KEY_OFFSET(k) - KEY_SIZE(k))
-#define START_KEY(k) KEY(KEY_INODE(k), KEY_START(k), 0)
-
-#define PTR_DEV_BITS 12
-
-PTR_FIELD(PTR_DEV, 51, PTR_DEV_BITS)
-PTR_FIELD(PTR_OFFSET, 8, 43)
-PTR_FIELD(PTR_GEN, 0, 8)
-
-#define PTR_CHECK_DEV ((1 << PTR_DEV_BITS) - 1)
-
-#define MAKE_PTR(gen, offset, dev) \
- ((((__u64) dev) << 51) | ((__u64) offset) << 8 | gen)
-
-/* Bkey utility code */
-
-static inline unsigned long bkey_u64s(const struct bkey *k)
-{
- return (sizeof(struct bkey) / sizeof(__u64)) + KEY_PTRS(k);
-}
-
-static inline unsigned long bkey_bytes(const struct bkey *k)
-{
- return bkey_u64s(k) * sizeof(__u64);
-}
-
-#define bkey_copy(_dest, _src) memcpy(_dest, _src, bkey_bytes(_src))
-
-static inline void bkey_copy_key(struct bkey *dest, const struct bkey *src)
-{
- SET_KEY_INODE(dest, KEY_INODE(src));
- SET_KEY_OFFSET(dest, KEY_OFFSET(src));
-}
-
-static inline struct bkey *bkey_next(const struct bkey *k)
-{
- __u64 *d = (void *) k;
-
- return (struct bkey *) (d + bkey_u64s(k));
-}
-
-static inline struct bkey *bkey_idx(const struct bkey *k, unsigned int nr_keys)
-{
- __u64 *d = (void *) k;
-
- return (struct bkey *) (d + nr_keys);
-}
-/* Enough for a key with 6 pointers */
-#define BKEY_PAD 8
-
-#define BKEY_PADDED(key) \
- union { struct bkey key; __u64 key ## _pad[BKEY_PAD]; }
-
-/* Superblock */
-
-/* Version 0: Cache device
- * Version 1: Backing device
- * Version 2: Seed pointer into btree node checksum
- * Version 3: Cache device with new UUID format
- * Version 4: Backing device with data offset
- */
-#define BCACHE_SB_VERSION_CDEV 0
-#define BCACHE_SB_VERSION_BDEV 1
-#define BCACHE_SB_VERSION_CDEV_WITH_UUID 3
-#define BCACHE_SB_VERSION_BDEV_WITH_OFFSET 4
-#define BCACHE_SB_VERSION_CDEV_WITH_FEATURES 5
-#define BCACHE_SB_VERSION_BDEV_WITH_FEATURES 6
-#define BCACHE_SB_MAX_VERSION 6
-
-#define SB_SECTOR 8
-#define SB_OFFSET (SB_SECTOR << SECTOR_SHIFT)
-#define SB_SIZE 4096
-#define SB_LABEL_SIZE 32
-#define SB_JOURNAL_BUCKETS 256U
-/* SB_JOURNAL_BUCKETS must be divisible by BITS_PER_LONG */
-#define MAX_CACHES_PER_SET 8
-
-#define BDEV_DATA_START_DEFAULT 16 /* sectors */
-
-struct cache_sb_disk {
- __le64 csum;
- __le64 offset; /* sector where this sb was written */
- __le64 version;
-
- __u8 magic[16];
-
- __u8 uuid[16];
- union {
- __u8 set_uuid[16];
- __le64 set_magic;
- };
- __u8 label[SB_LABEL_SIZE];
-
- __le64 flags;
- __le64 seq;
-
- __le64 feature_compat;
- __le64 feature_incompat;
- __le64 feature_ro_compat;
-
- __le64 pad[5];
-
- union {
- struct {
- /* Cache devices */
- __le64 nbuckets; /* device size */
-
- __le16 block_size; /* sectors */
- __le16 bucket_size; /* sectors */
-
- __le16 nr_in_set;
- __le16 nr_this_dev;
- };
- struct {
- /* Backing devices */
- __le64 data_offset;
-
- /*
- * block_size from the cache device section is still used by
- * backing devices, so don't add anything here until we fix
- * things to not need it for backing devices anymore
- */
- };
- };
-
- __le32 last_mount; /* time overflow in y2106 */
-
- __le16 first_bucket;
- union {
- __le16 njournal_buckets;
- __le16 keys;
- };
- __le64 d[SB_JOURNAL_BUCKETS]; /* journal buckets */
- __le16 obso_bucket_size_hi; /* obsoleted */
-};
-
-/*
- * This is for in-memory bcache super block.
- * NOTE: cache_sb is NOT exactly mapping to cache_sb_disk, the member
- * size, ordering and even whole struct size may be different
- * from cache_sb_disk.
- */
-struct cache_sb {
- __u64 offset; /* sector where this sb was written */
- __u64 version;
-
- __u8 magic[16];
-
- __u8 uuid[16];
- union {
- __u8 set_uuid[16];
- __u64 set_magic;
- };
- __u8 label[SB_LABEL_SIZE];
-
- __u64 flags;
- __u64 seq;
-
- __u64 feature_compat;
- __u64 feature_incompat;
- __u64 feature_ro_compat;
-
- union {
- struct {
- /* Cache devices */
- __u64 nbuckets; /* device size */
-
- __u16 block_size; /* sectors */
- __u16 nr_in_set;
- __u16 nr_this_dev;
- __u32 bucket_size; /* sectors */
- };
- struct {
- /* Backing devices */
- __u64 data_offset;
-
- /*
- * block_size from the cache device section is still used by
- * backing devices, so don't add anything here until we fix
- * things to not need it for backing devices anymore
- */
- };
- };
-
- __u32 last_mount; /* time overflow in y2106 */
-
- __u16 first_bucket;
- union {
- __u16 njournal_buckets;
- __u16 keys;
- };
- __u64 d[SB_JOURNAL_BUCKETS]; /* journal buckets */
-};
-
-static inline _Bool SB_IS_BDEV(const struct cache_sb *sb)
-{
- return sb->version == BCACHE_SB_VERSION_BDEV
- || sb->version == BCACHE_SB_VERSION_BDEV_WITH_OFFSET
- || sb->version == BCACHE_SB_VERSION_BDEV_WITH_FEATURES;
-}
-
-BITMASK(CACHE_SYNC, struct cache_sb, flags, 0, 1);
-BITMASK(CACHE_DISCARD, struct cache_sb, flags, 1, 1);
-BITMASK(CACHE_REPLACEMENT, struct cache_sb, flags, 2, 3);
-#define CACHE_REPLACEMENT_LRU 0U
-#define CACHE_REPLACEMENT_FIFO 1U
-#define CACHE_REPLACEMENT_RANDOM 2U
-
-BITMASK(BDEV_CACHE_MODE, struct cache_sb, flags, 0, 4);
-#define CACHE_MODE_WRITETHROUGH 0U
-#define CACHE_MODE_WRITEBACK 1U
-#define CACHE_MODE_WRITEAROUND 2U
-#define CACHE_MODE_NONE 3U
-BITMASK(BDEV_STATE, struct cache_sb, flags, 61, 2);
-#define BDEV_STATE_NONE 0U
-#define BDEV_STATE_CLEAN 1U
-#define BDEV_STATE_DIRTY 2U
-#define BDEV_STATE_STALE 3U
-
-/*
- * Magic numbers
- *
- * The various other data structures have their own magic numbers, which are
- * xored with the first part of the cache set's UUID
- */
-
-#define JSET_MAGIC 0x245235c1a3625032ULL
-#define PSET_MAGIC 0x6750e15f87337f91ULL
-#define BSET_MAGIC 0x90135c78b99e07f5ULL
-
-static inline __u64 jset_magic(struct cache_sb *sb)
-{
- return sb->set_magic ^ JSET_MAGIC;
-}
-
-static inline __u64 pset_magic(struct cache_sb *sb)
-{
- return sb->set_magic ^ PSET_MAGIC;
-}
-
-static inline __u64 bset_magic(struct cache_sb *sb)
-{
- return sb->set_magic ^ BSET_MAGIC;
-}
-
-/*
- * Journal
- *
- * On disk format for a journal entry:
- * seq is monotonically increasing; every journal entry has its own unique
- * sequence number.
- *
- * last_seq is the oldest journal entry that still has keys the btree hasn't
- * flushed to disk yet.
- *
- * version is for on disk format changes.
- */
-
-#define BCACHE_JSET_VERSION_UUIDv1 1
-#define BCACHE_JSET_VERSION_UUID 1 /* Always latest UUID format */
-#define BCACHE_JSET_VERSION 1
-
-struct jset {
- __u64 csum;
- __u64 magic;
- __u64 seq;
- __u32 version;
- __u32 keys;
-
- __u64 last_seq;
-
- BKEY_PADDED(uuid_bucket);
- BKEY_PADDED(btree_root);
- __u16 btree_level;
- __u16 pad[3];
-
- __u64 prio_bucket[MAX_CACHES_PER_SET];
-
- union {
- struct bkey start[0];
- __u64 d[0];
- };
-};
-
-/* Bucket prios/gens */
-
-struct prio_set {
- __u64 csum;
- __u64 magic;
- __u64 seq;
- __u32 version;
- __u32 pad;
-
- __u64 next_bucket;
-
- struct bucket_disk {
- __u16 prio;
- __u8 gen;
- } __attribute((packed)) data[];
-};
-
-/* UUIDS - per backing device/flash only volume metadata */
-
-struct uuid_entry {
- union {
- struct {
- __u8 uuid[16];
- __u8 label[32];
- __u32 first_reg; /* time overflow in y2106 */
- __u32 last_reg;
- __u32 invalidated;
-
- __u32 flags;
- /* Size of flash only volumes */
- __u64 sectors;
- };
-
- __u8 pad[128];
- };
-};
-
-BITMASK(UUID_FLASH_ONLY, struct uuid_entry, flags, 0, 1);
-
-/* Btree nodes */
-
-/* Version 1: Seed pointer into btree node checksum
- */
-#define BCACHE_BSET_CSUM 1
-#define BCACHE_BSET_VERSION 1
-
-/*
- * Btree nodes
- *
- * On disk a btree node is a list/log of these; within each set the keys are
- * sorted
- */
-struct bset {
- __u64 csum;
- __u64 magic;
- __u64 seq;
- __u32 version;
- __u32 keys;
-
- union {
- struct bkey start[0];
- __u64 d[0];
- };
-};
-
-/* OBSOLETE */
-
-/* UUIDS - per backing device/flash only volume metadata */
-
-struct uuid_entry_v0 {
- __u8 uuid[16];
- __u8 label[32];
- __u32 first_reg;
- __u32 last_reg;
- __u32 invalidated;
- __u32 pad;
-};
-
-#endif /* _LINUX_BCACHE_H */
diff --git a/original/uapi/linux/bpf.h b/original/uapi/linux/bpf.h
index 4ba4ef0..b0383d3 100644
--- a/original/uapi/linux/bpf.h
+++ b/original/uapi/linux/bpf.h
@@ -84,7 +84,7 @@
struct bpf_cgroup_storage_key {
__u64 cgroup_inode_id; /* cgroup inode id */
- __u32 attach_type; /* program attach type */
+ __u32 attach_type; /* program attach type (enum bpf_attach_type) */
};
union bpf_iter_link_info {
@@ -93,7 +93,748 @@
} map;
};
-/* BPF syscall commands, see bpf(2) man-page for details. */
+/* BPF syscall commands, see bpf(2) man-page for more details. */
+/**
+ * DOC: eBPF Syscall Preamble
+ *
+ * The operation to be performed by the **bpf**\ () system call is determined
+ * by the *cmd* argument. Each operation takes an accompanying argument,
+ * provided via *attr*, which is a pointer to a union of type *bpf_attr* (see
+ * below). The size argument is the size of the union pointed to by *attr*.
+ */
+/**
+ * DOC: eBPF Syscall Commands
+ *
+ * BPF_MAP_CREATE
+ * Description
+ * Create a map and return a file descriptor that refers to the
+ * map. The close-on-exec file descriptor flag (see **fcntl**\ (2))
+ * is automatically enabled for the new file descriptor.
+ *
+ * Applying **close**\ (2) to the file descriptor returned by
+ * **BPF_MAP_CREATE** will delete the map (but see NOTES).
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_MAP_LOOKUP_ELEM
+ * Description
+ * Look up an element with a given *key* in the map referred to
+ * by the file descriptor *map_fd*.
+ *
+ * The *flags* argument may be specified as one of the
+ * following:
+ *
+ * **BPF_F_LOCK**
+ * Look up the value of a spin-locked map without
+ * returning the lock. This must be specified if the
+ * elements contain a spinlock.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_UPDATE_ELEM
+ * Description
+ * Create or update an element (key/value pair) in a specified map.
+ *
+ * The *flags* argument should be specified as one of the
+ * following:
+ *
+ * **BPF_ANY**
+ * Create a new element or update an existing element.
+ * **BPF_NOEXIST**
+ * Create a new element only if it did not exist.
+ * **BPF_EXIST**
+ * Update an existing element.
+ * **BPF_F_LOCK**
+ * Update a spin_lock-ed map element.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**,
+ * **E2BIG**, **EEXIST**, or **ENOENT**.
+ *
+ * **E2BIG**
+ * The number of elements in the map reached the
+ * *max_entries* limit specified at map creation time.
+ * **EEXIST**
+ * If *flags* specifies **BPF_NOEXIST** and the element
+ * with *key* already exists in the map.
+ * **ENOENT**
+ * If *flags* specifies **BPF_EXIST** and the element with
+ * *key* does not exist in the map.
+ *
+ * BPF_MAP_DELETE_ELEM
+ * Description
+ * Look up and delete an element by key in a specified map.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_GET_NEXT_KEY
+ * Description
+ * Look up an element by key in a specified map and return the key
+ * of the next element. Can be used to iterate over all elements
+ * in the map.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * The following cases can be used to iterate over all elements of
+ * the map:
+ *
+ * * If *key* is not found, the operation returns zero and sets
+ * the *next_key* pointer to the key of the first element.
+ * * If *key* is found, the operation returns zero and sets the
+ * *next_key* pointer to the key of the next element.
+ * * If *key* is the last element, returns -1 and *errno* is set
+ * to **ENOENT**.
+ *
+ * May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or
+ * **EINVAL** on error.
+ *
+ * BPF_PROG_LOAD
+ * Description
+ * Verify and load an eBPF program, returning a new file
+ * descriptor associated with the program.
+ *
+ * Applying **close**\ (2) to the file descriptor returned by
+ * **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES).
+ *
+ * The close-on-exec file descriptor flag (see **fcntl**\ (2)) is
+ * automatically enabled for the new file descriptor.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_OBJ_PIN
+ * Description
+ * Pin an eBPF program or map referred by the specified *bpf_fd*
+ * to the provided *pathname* on the filesystem.
+ *
+ * The *pathname* argument must not contain a dot (".").
+ *
+ * On success, *pathname* retains a reference to the eBPF object,
+ * preventing deallocation of the object when the original
+ * *bpf_fd* is closed. This allow the eBPF object to live beyond
+ * **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent
+ * process.
+ *
+ * Applying **unlink**\ (2) or similar calls to the *pathname*
+ * unpins the object from the filesystem, removing the reference.
+ * If no other file descriptors or filesystem nodes refer to the
+ * same object, it will be deallocated (see NOTES).
+ *
+ * The filesystem type for the parent directory of *pathname* must
+ * be **BPF_FS_MAGIC**.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_OBJ_GET
+ * Description
+ * Open a file descriptor for the eBPF object pinned to the
+ * specified *pathname*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_PROG_ATTACH
+ * Description
+ * Attach an eBPF program to a *target_fd* at the specified
+ * *attach_type* hook.
+ *
+ * The *attach_type* specifies the eBPF attachment point to
+ * attach the program to, and must be one of *bpf_attach_type*
+ * (see below).
+ *
+ * The *attach_bpf_fd* must be a valid file descriptor for a
+ * loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap
+ * or sock_ops type corresponding to the specified *attach_type*.
+ *
+ * The *target_fd* must be a valid file descriptor for a kernel
+ * object which depends on the attach type of *attach_bpf_fd*:
+ *
+ * **BPF_PROG_TYPE_CGROUP_DEVICE**,
+ * **BPF_PROG_TYPE_CGROUP_SKB**,
+ * **BPF_PROG_TYPE_CGROUP_SOCK**,
+ * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**,
+ * **BPF_PROG_TYPE_CGROUP_SOCKOPT**,
+ * **BPF_PROG_TYPE_CGROUP_SYSCTL**,
+ * **BPF_PROG_TYPE_SOCK_OPS**
+ *
+ * Control Group v2 hierarchy with the eBPF controller
+ * enabled. Requires the kernel to be compiled with
+ * **CONFIG_CGROUP_BPF**.
+ *
+ * **BPF_PROG_TYPE_FLOW_DISSECTOR**
+ *
+ * Network namespace (eg /proc/self/ns/net).
+ *
+ * **BPF_PROG_TYPE_LIRC_MODE2**
+ *
+ * LIRC device path (eg /dev/lircN). Requires the kernel
+ * to be compiled with **CONFIG_BPF_LIRC_MODE2**.
+ *
+ * **BPF_PROG_TYPE_SK_SKB**,
+ * **BPF_PROG_TYPE_SK_MSG**
+ *
+ * eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**).
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_PROG_DETACH
+ * Description
+ * Detach the eBPF program associated with the *target_fd* at the
+ * hook specified by *attach_type*. The program must have been
+ * previously attached using **BPF_PROG_ATTACH**.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_PROG_TEST_RUN
+ * Description
+ * Run the eBPF program associated with the *prog_fd* a *repeat*
+ * number of times against a provided program context *ctx_in* and
+ * data *data_in*, and return the modified program context
+ * *ctx_out*, *data_out* (for example, packet data), result of the
+ * execution *retval*, and *duration* of the test run.
+ *
+ * The sizes of the buffers provided as input and output
+ * parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must
+ * be provided in the corresponding variables *ctx_size_in*,
+ * *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any
+ * of these parameters are not provided (ie set to NULL), the
+ * corresponding size field must be zero.
+ *
+ * Some program types have particular requirements:
+ *
+ * **BPF_PROG_TYPE_SK_LOOKUP**
+ * *data_in* and *data_out* must be NULL.
+ *
+ * **BPF_PROG_TYPE_RAW_TRACEPOINT**,
+ * **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE**
+ *
+ * *ctx_out*, *data_in* and *data_out* must be NULL.
+ * *repeat* must be zero.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * **ENOSPC**
+ * Either *data_size_out* or *ctx_size_out* is too small.
+ * **ENOTSUPP**
+ * This command is not supported by the program type of
+ * the program referred to by *prog_fd*.
+ *
+ * BPF_PROG_GET_NEXT_ID
+ * Description
+ * Fetch the next eBPF program currently loaded into the kernel.
+ *
+ * Looks for the eBPF program with an id greater than *start_id*
+ * and updates *next_id* on success. If no other eBPF programs
+ * remain with ids higher than *start_id*, returns -1 and sets
+ * *errno* to **ENOENT**.
+ *
+ * Return
+ * Returns zero on success. On error, or when no id remains, -1
+ * is returned and *errno* is set appropriately.
+ *
+ * BPF_MAP_GET_NEXT_ID
+ * Description
+ * Fetch the next eBPF map currently loaded into the kernel.
+ *
+ * Looks for the eBPF map with an id greater than *start_id*
+ * and updates *next_id* on success. If no other eBPF maps
+ * remain with ids higher than *start_id*, returns -1 and sets
+ * *errno* to **ENOENT**.
+ *
+ * Return
+ * Returns zero on success. On error, or when no id remains, -1
+ * is returned and *errno* is set appropriately.
+ *
+ * BPF_PROG_GET_FD_BY_ID
+ * Description
+ * Open a file descriptor for the eBPF program corresponding to
+ * *prog_id*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_MAP_GET_FD_BY_ID
+ * Description
+ * Open a file descriptor for the eBPF map corresponding to
+ * *map_id*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_OBJ_GET_INFO_BY_FD
+ * Description
+ * Obtain information about the eBPF object corresponding to
+ * *bpf_fd*.
+ *
+ * Populates up to *info_len* bytes of *info*, which will be in
+ * one of the following formats depending on the eBPF object type
+ * of *bpf_fd*:
+ *
+ * * **struct bpf_prog_info**
+ * * **struct bpf_map_info**
+ * * **struct bpf_btf_info**
+ * * **struct bpf_link_info**
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_PROG_QUERY
+ * Description
+ * Obtain information about eBPF programs associated with the
+ * specified *attach_type* hook.
+ *
+ * The *target_fd* must be a valid file descriptor for a kernel
+ * object which depends on the attach type of *attach_bpf_fd*:
+ *
+ * **BPF_PROG_TYPE_CGROUP_DEVICE**,
+ * **BPF_PROG_TYPE_CGROUP_SKB**,
+ * **BPF_PROG_TYPE_CGROUP_SOCK**,
+ * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**,
+ * **BPF_PROG_TYPE_CGROUP_SOCKOPT**,
+ * **BPF_PROG_TYPE_CGROUP_SYSCTL**,
+ * **BPF_PROG_TYPE_SOCK_OPS**
+ *
+ * Control Group v2 hierarchy with the eBPF controller
+ * enabled. Requires the kernel to be compiled with
+ * **CONFIG_CGROUP_BPF**.
+ *
+ * **BPF_PROG_TYPE_FLOW_DISSECTOR**
+ *
+ * Network namespace (eg /proc/self/ns/net).
+ *
+ * **BPF_PROG_TYPE_LIRC_MODE2**
+ *
+ * LIRC device path (eg /dev/lircN). Requires the kernel
+ * to be compiled with **CONFIG_BPF_LIRC_MODE2**.
+ *
+ * **BPF_PROG_QUERY** always fetches the number of programs
+ * attached and the *attach_flags* which were used to attach those
+ * programs. Additionally, if *prog_ids* is nonzero and the number
+ * of attached programs is less than *prog_cnt*, populates
+ * *prog_ids* with the eBPF program ids of the programs attached
+ * at *target_fd*.
+ *
+ * The following flags may alter the result:
+ *
+ * **BPF_F_QUERY_EFFECTIVE**
+ * Only return information regarding programs which are
+ * currently effective at the specified *target_fd*.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_RAW_TRACEPOINT_OPEN
+ * Description
+ * Attach an eBPF program to a tracepoint *name* to access kernel
+ * internal arguments of the tracepoint in their raw form.
+ *
+ * The *prog_fd* must be a valid file descriptor associated with
+ * a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**.
+ *
+ * No ABI guarantees are made about the content of tracepoint
+ * arguments exposed to the corresponding eBPF program.
+ *
+ * Applying **close**\ (2) to the file descriptor returned by
+ * **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES).
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_BTF_LOAD
+ * Description
+ * Verify and load BPF Type Format (BTF) metadata into the kernel,
+ * returning a new file descriptor associated with the metadata.
+ * BTF is described in more detail at
+ * https://www.kernel.org/doc/html/latest/bpf/btf.html.
+ *
+ * The *btf* parameter must point to valid memory providing
+ * *btf_size* bytes of BTF binary metadata.
+ *
+ * The returned file descriptor can be passed to other **bpf**\ ()
+ * subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to
+ * associate the BTF with those objects.
+ *
+ * Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional
+ * parameters to specify a *btf_log_buf*, *btf_log_size* and
+ * *btf_log_level* which allow the kernel to return freeform log
+ * output regarding the BTF verification process.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_BTF_GET_FD_BY_ID
+ * Description
+ * Open a file descriptor for the BPF Type Format (BTF)
+ * corresponding to *btf_id*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_TASK_FD_QUERY
+ * Description
+ * Obtain information about eBPF programs associated with the
+ * target process identified by *pid* and *fd*.
+ *
+ * If the *pid* and *fd* are associated with a tracepoint, kprobe
+ * or uprobe perf event, then the *prog_id* and *fd_type* will
+ * be populated with the eBPF program id and file descriptor type
+ * of type **bpf_task_fd_type**. If associated with a kprobe or
+ * uprobe, the *probe_offset* and *probe_addr* will also be
+ * populated. Optionally, if *buf* is provided, then up to
+ * *buf_len* bytes of *buf* will be populated with the name of
+ * the tracepoint, kprobe or uprobe.
+ *
+ * The resulting *prog_id* may be introspected in deeper detail
+ * using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_LOOKUP_AND_DELETE_ELEM
+ * Description
+ * Look up an element with the given *key* in the map referred to
+ * by the file descriptor *fd*, and if found, delete the element.
+ *
+ * For **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map
+ * types, the *flags* argument needs to be set to 0, but for other
+ * map types, it may be specified as:
+ *
+ * **BPF_F_LOCK**
+ * Look up and delete the value of a spin-locked map
+ * without returning the lock. This must be specified if
+ * the elements contain a spinlock.
+ *
+ * The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types
+ * implement this command as a "pop" operation, deleting the top
+ * element rather than one corresponding to *key*.
+ * The *key* and *key_len* parameters should be zeroed when
+ * issuing this operation for these map types.
+ *
+ * This command is only valid for the following map types:
+ * * **BPF_MAP_TYPE_QUEUE**
+ * * **BPF_MAP_TYPE_STACK**
+ * * **BPF_MAP_TYPE_HASH**
+ * * **BPF_MAP_TYPE_PERCPU_HASH**
+ * * **BPF_MAP_TYPE_LRU_HASH**
+ * * **BPF_MAP_TYPE_LRU_PERCPU_HASH**
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_FREEZE
+ * Description
+ * Freeze the permissions of the specified map.
+ *
+ * Write permissions may be frozen by passing zero *flags*.
+ * Upon success, no future syscall invocations may alter the
+ * map state of *map_fd*. Write operations from eBPF programs
+ * are still possible for a frozen map.
+ *
+ * Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_BTF_GET_NEXT_ID
+ * Description
+ * Fetch the next BPF Type Format (BTF) object currently loaded
+ * into the kernel.
+ *
+ * Looks for the BTF object with an id greater than *start_id*
+ * and updates *next_id* on success. If no other BTF objects
+ * remain with ids higher than *start_id*, returns -1 and sets
+ * *errno* to **ENOENT**.
+ *
+ * Return
+ * Returns zero on success. On error, or when no id remains, -1
+ * is returned and *errno* is set appropriately.
+ *
+ * BPF_MAP_LOOKUP_BATCH
+ * Description
+ * Iterate and fetch multiple elements in a map.
+ *
+ * Two opaque values are used to manage batch operations,
+ * *in_batch* and *out_batch*. Initially, *in_batch* must be set
+ * to NULL to begin the batched operation. After each subsequent
+ * **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant
+ * *out_batch* as the *in_batch* for the next operation to
+ * continue iteration from the current point.
+ *
+ * The *keys* and *values* are output parameters which must point
+ * to memory large enough to hold *count* items based on the key
+ * and value size of the map *map_fd*. The *keys* buffer must be
+ * of *key_size* * *count*. The *values* buffer must be of
+ * *value_size* * *count*.
+ *
+ * The *elem_flags* argument may be specified as one of the
+ * following:
+ *
+ * **BPF_F_LOCK**
+ * Look up the value of a spin-locked map without
+ * returning the lock. This must be specified if the
+ * elements contain a spinlock.
+ *
+ * On success, *count* elements from the map are copied into the
+ * user buffer, with the keys copied into *keys* and the values
+ * copied into the corresponding indices in *values*.
+ *
+ * If an error is returned and *errno* is not **EFAULT**, *count*
+ * is set to the number of successfully processed elements.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * May set *errno* to **ENOSPC** to indicate that *keys* or
+ * *values* is too small to dump an entire bucket during
+ * iteration of a hash-based map type.
+ *
+ * BPF_MAP_LOOKUP_AND_DELETE_BATCH
+ * Description
+ * Iterate and delete all elements in a map.
+ *
+ * This operation has the same behavior as
+ * **BPF_MAP_LOOKUP_BATCH** with two exceptions:
+ *
+ * * Every element that is successfully returned is also deleted
+ * from the map. This is at least *count* elements. Note that
+ * *count* is both an input and an output parameter.
+ * * Upon returning with *errno* set to **EFAULT**, up to
+ * *count* elements may be deleted without returning the keys
+ * and values of the deleted elements.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_MAP_UPDATE_BATCH
+ * Description
+ * Update multiple elements in a map by *key*.
+ *
+ * The *keys* and *values* are input parameters which must point
+ * to memory large enough to hold *count* items based on the key
+ * and value size of the map *map_fd*. The *keys* buffer must be
+ * of *key_size* * *count*. The *values* buffer must be of
+ * *value_size* * *count*.
+ *
+ * Each element specified in *keys* is sequentially updated to the
+ * value in the corresponding index in *values*. The *in_batch*
+ * and *out_batch* parameters are ignored and should be zeroed.
+ *
+ * The *elem_flags* argument should be specified as one of the
+ * following:
+ *
+ * **BPF_ANY**
+ * Create new elements or update a existing elements.
+ * **BPF_NOEXIST**
+ * Create new elements only if they do not exist.
+ * **BPF_EXIST**
+ * Update existing elements.
+ * **BPF_F_LOCK**
+ * Update spin_lock-ed map elements. This must be
+ * specified if the map value contains a spinlock.
+ *
+ * On success, *count* elements from the map are updated.
+ *
+ * If an error is returned and *errno* is not **EFAULT**, *count*
+ * is set to the number of successfully processed elements.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or
+ * **E2BIG**. **E2BIG** indicates that the number of elements in
+ * the map reached the *max_entries* limit specified at map
+ * creation time.
+ *
+ * May set *errno* to one of the following error codes under
+ * specific circumstances:
+ *
+ * **EEXIST**
+ * If *flags* specifies **BPF_NOEXIST** and the element
+ * with *key* already exists in the map.
+ * **ENOENT**
+ * If *flags* specifies **BPF_EXIST** and the element with
+ * *key* does not exist in the map.
+ *
+ * BPF_MAP_DELETE_BATCH
+ * Description
+ * Delete multiple elements in a map by *key*.
+ *
+ * The *keys* parameter is an input parameter which must point
+ * to memory large enough to hold *count* items based on the key
+ * size of the map *map_fd*, that is, *key_size* * *count*.
+ *
+ * Each element specified in *keys* is sequentially deleted. The
+ * *in_batch*, *out_batch*, and *values* parameters are ignored
+ * and should be zeroed.
+ *
+ * The *elem_flags* argument may be specified as one of the
+ * following:
+ *
+ * **BPF_F_LOCK**
+ * Look up the value of a spin-locked map without
+ * returning the lock. This must be specified if the
+ * elements contain a spinlock.
+ *
+ * On success, *count* elements from the map are updated.
+ *
+ * If an error is returned and *errno* is not **EFAULT**, *count*
+ * is set to the number of successfully processed elements. If
+ * *errno* is **EFAULT**, up to *count* elements may be been
+ * deleted.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_LINK_CREATE
+ * Description
+ * Attach an eBPF program to a *target_fd* at the specified
+ * *attach_type* hook and return a file descriptor handle for
+ * managing the link.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_LINK_UPDATE
+ * Description
+ * Update the eBPF program in the specified *link_fd* to
+ * *new_prog_fd*.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_LINK_GET_FD_BY_ID
+ * Description
+ * Open a file descriptor for the eBPF Link corresponding to
+ * *link_id*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_LINK_GET_NEXT_ID
+ * Description
+ * Fetch the next eBPF link currently loaded into the kernel.
+ *
+ * Looks for the eBPF link with an id greater than *start_id*
+ * and updates *next_id* on success. If no other eBPF links
+ * remain with ids higher than *start_id*, returns -1 and sets
+ * *errno* to **ENOENT**.
+ *
+ * Return
+ * Returns zero on success. On error, or when no id remains, -1
+ * is returned and *errno* is set appropriately.
+ *
+ * BPF_ENABLE_STATS
+ * Description
+ * Enable eBPF runtime statistics gathering.
+ *
+ * Runtime statistics gathering for the eBPF runtime is disabled
+ * by default to minimize the corresponding performance overhead.
+ * This command enables statistics globally.
+ *
+ * Multiple programs may independently enable statistics.
+ * After gathering the desired statistics, eBPF runtime statistics
+ * may be disabled again by calling **close**\ (2) for the file
+ * descriptor returned by this function. Statistics will only be
+ * disabled system-wide when all outstanding file descriptors
+ * returned by prior calls for this subcommand are closed.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_ITER_CREATE
+ * Description
+ * Create an iterator on top of the specified *link_fd* (as
+ * previously created using **BPF_LINK_CREATE**) and return a
+ * file descriptor that can be used to trigger the iteration.
+ *
+ * If the resulting file descriptor is pinned to the filesystem
+ * using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls
+ * for that path will trigger the iterator to read kernel state
+ * using the eBPF program attached to *link_fd*.
+ *
+ * Return
+ * A new file descriptor (a nonnegative integer), or -1 if an
+ * error occurred (in which case, *errno* is set appropriately).
+ *
+ * BPF_LINK_DETACH
+ * Description
+ * Forcefully detach the specified *link_fd* from its
+ * corresponding attachment point.
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * BPF_PROG_BIND_MAP
+ * Description
+ * Bind a map to the lifetime of an eBPF program.
+ *
+ * The map identified by *map_fd* is bound to the program
+ * identified by *prog_fd* and only released when *prog_fd* is
+ * released. This may be used in cases where metadata should be
+ * associated with a program which otherwise does not contain any
+ * references to the map (for example, embedded in the eBPF
+ * program instructions).
+ *
+ * Return
+ * Returns zero on success. On error, -1 is returned and *errno*
+ * is set appropriately.
+ *
+ * NOTES
+ * eBPF objects (maps and programs) can be shared between processes.
+ *
+ * * After **fork**\ (2), the child inherits file descriptors
+ * referring to the same eBPF objects.
+ * * File descriptors referring to eBPF objects can be transferred over
+ * **unix**\ (7) domain sockets.
+ * * File descriptors referring to eBPF objects can be duplicated in the
+ * usual way, using **dup**\ (2) and similar calls.
+ * * File descriptors referring to eBPF objects can be pinned to the
+ * filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2).
+ *
+ * An eBPF object is deallocated only after all file descriptors referring
+ * to the object have been closed and no references remain pinned to the
+ * filesystem or attached (for example, bound to a program or device).
+ */
enum bpf_cmd {
BPF_MAP_CREATE,
BPF_MAP_LOOKUP_ELEM,
@@ -106,6 +847,7 @@
BPF_PROG_ATTACH,
BPF_PROG_DETACH,
BPF_PROG_TEST_RUN,
+ BPF_PROG_RUN = BPF_PROG_TEST_RUN,
BPF_PROG_GET_NEXT_ID,
BPF_MAP_GET_NEXT_ID,
BPF_PROG_GET_FD_BY_ID,
@@ -164,6 +906,7 @@
BPF_MAP_TYPE_RINGBUF,
BPF_MAP_TYPE_INODE_STORAGE,
BPF_MAP_TYPE_TASK_STORAGE,
+ BPF_MAP_TYPE_BLOOM_FILTER,
};
/* Note that tracing related programs such as
@@ -206,6 +949,7 @@
BPF_PROG_TYPE_EXT,
BPF_PROG_TYPE_LSM,
BPF_PROG_TYPE_SK_LOOKUP,
+ BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */
};
enum bpf_attach_type {
@@ -247,6 +991,10 @@
BPF_XDP_CPUMAP,
BPF_SK_LOOKUP,
BPF_XDP,
+ BPF_SK_SKB_VERDICT,
+ BPF_SK_REUSEPORT_SELECT,
+ BPF_SK_REUSEPORT_SELECT_OR_MIGRATE,
+ BPF_PERF_EVENT,
__MAX_BPF_ATTACH_TYPE
};
@@ -260,6 +1008,7 @@
BPF_LINK_TYPE_ITER = 4,
BPF_LINK_TYPE_NETNS = 5,
BPF_LINK_TYPE_XDP = 6,
+ BPF_LINK_TYPE_PERF_EVENT = 7,
MAX_BPF_LINK_TYPE,
};
@@ -365,8 +1114,8 @@
/* When BPF ldimm64's insn[0].src_reg != 0 then this can have
* the following extensions:
*
- * insn[0].src_reg: BPF_PSEUDO_MAP_FD
- * insn[0].imm: map fd
+ * insn[0].src_reg: BPF_PSEUDO_MAP_[FD|IDX]
+ * insn[0].imm: map fd or fd_idx
* insn[1].imm: 0
* insn[0].off: 0
* insn[1].off: 0
@@ -374,15 +1123,19 @@
* verifier type: CONST_PTR_TO_MAP
*/
#define BPF_PSEUDO_MAP_FD 1
-/* insn[0].src_reg: BPF_PSEUDO_MAP_VALUE
- * insn[0].imm: map fd
+#define BPF_PSEUDO_MAP_IDX 5
+
+/* insn[0].src_reg: BPF_PSEUDO_MAP_[IDX_]VALUE
+ * insn[0].imm: map fd or fd_idx
* insn[1].imm: offset into value
* insn[0].off: 0
* insn[1].off: 0
* ldimm64 rewrite: address of map[0]+offset
* verifier type: PTR_TO_MAP_VALUE
*/
-#define BPF_PSEUDO_MAP_VALUE 2
+#define BPF_PSEUDO_MAP_VALUE 2
+#define BPF_PSEUDO_MAP_IDX_VALUE 6
+
/* insn[0].src_reg: BPF_PSEUDO_BTF_ID
* insn[0].imm: kernel btd id of VAR
* insn[1].imm: 0
@@ -393,11 +1146,24 @@
* is struct/union.
*/
#define BPF_PSEUDO_BTF_ID 3
+/* insn[0].src_reg: BPF_PSEUDO_FUNC
+ * insn[0].imm: insn offset to the func
+ * insn[1].imm: 0
+ * insn[0].off: 0
+ * insn[1].off: 0
+ * ldimm64 rewrite: address of the function
+ * verifier type: PTR_TO_FUNC.
+ */
+#define BPF_PSEUDO_FUNC 4
/* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative
* offset to another bpf function
*/
#define BPF_PSEUDO_CALL 1
+/* when bpf_call->src_reg == BPF_PSEUDO_KFUNC_CALL,
+ * bpf_call->imm == btf_id of a BTF_KIND_FUNC in the running kernel
+ */
+#define BPF_PSEUDO_KFUNC_CALL 2
/* flags for BPF_MAP_UPDATE_ELEM command */
enum {
@@ -509,6 +1275,13 @@
* struct stored as the
* map value
*/
+ /* Any per-map-type extra fields
+ *
+ * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the
+ * number of hash functions (if 0, the bloom filter will default
+ * to using 5 hash functions).
+ */
+ __u64 map_extra;
};
struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
@@ -569,6 +1342,10 @@
/* or valid module BTF object fd or 0 to attach to vmlinux */
__u32 attach_btf_obj_fd;
};
+ __u32 core_relo_cnt; /* number of bpf_core_relo */
+ __aligned_u64 fd_array; /* array of FDs */
+ __aligned_u64 core_relos;
+ __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */
};
struct { /* anonymous struct used by BPF_OBJ_* commands */
@@ -681,6 +1458,13 @@
__aligned_u64 iter_info; /* extra bpf_iter_link_info */
__u32 iter_info_len; /* iter_info length */
};
+ struct {
+ /* black box user-provided value passed through
+ * to BPF program at the execution time and
+ * accessible through bpf_get_attach_cookie() BPF helper
+ */
+ __u64 bpf_cookie;
+ } perf_event;
};
} link_create;
@@ -720,7 +1504,7 @@
* parsed and used to produce a manual page. The workflow is the following,
* and requires the rst2man utility:
*
- * $ ./scripts/bpf_helpers_doc.py \
+ * $ ./scripts/bpf_doc.py \
* --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
* $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
* $ man /tmp/bpf-helpers.7
@@ -855,7 +1639,7 @@
* u32 bpf_get_smp_processor_id(void)
* Description
* Get the SMP (symmetric multiprocessing) processor id. Note that
- * all programs run with preemption disabled, which means that the
+ * all programs run with migration disabled, which means that the
* SMP processor id is stable during all the execution of the
* program.
* Return
@@ -962,7 +1746,7 @@
* if the maximum number of tail calls has been reached for this
* chain of programs. This limit is defined in the kernel by the
* macro **MAX_TAIL_CALL_CNT** (not accessible to user space),
- * which is currently set to 32.
+ * which is currently set to 33.
* Return
* 0 on success, or a negative error in case of failure.
*
@@ -1765,6 +2549,10 @@
* Use with ENCAP_L3/L4 flags to further specify the tunnel
* type; *len* is the length of the inner MAC header.
*
+ * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**:
+ * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the
+ * L2 type as Ethernet.
+ *
* A call to this helper is susceptible to change the underlying
* packet buffer. Therefore, at load time, all checks on pointers
* previously done by the verifier are invalidated and must be
@@ -1785,8 +2573,12 @@
* The lower two bits of *flags* are used as the return code if
* the map lookup fails. This is so that the return value can be
* one of the XDP program return codes up to **XDP_TX**, as chosen
- * by the caller. Any higher bits in the *flags* argument must be
- * unset.
+ * by the caller. The higher bits of *flags* can be set to
+ * BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS as defined below.
+ *
+ * With BPF_F_BROADCAST the packet will be broadcasted to all the
+ * interfaces in the map, with BPF_F_EXCLUDE_INGRESS the ingress
+ * interface will be excluded when do broadcasting.
*
* See also **bpf_redirect**\ (), which only supports redirecting
* to an ifindex, but doesn't require a map to do so.
@@ -2473,7 +3265,7 @@
* long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags)
* Description
* Select a **SO_REUSEPORT** socket from a
- * **BPF_MAP_TYPE_REUSEPORT_ARRAY** *map*.
+ * **BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*.
* It checks the selected socket is matching the incoming
* request in the socket buffer.
* Return
@@ -3264,7 +4056,7 @@
* arguments. The *data* are a **u64** array and corresponding format string
* values are stored in the array. For strings and pointers where pointees
* are accessed, only the pointer values are stored in the *data* array.
- * The *data_len* is the size of *data* in bytes.
+ * The *data_len* is the size of *data* in bytes - must be a multiple of 8.
*
* Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory.
* Reading kernel memory may fail due to either invalid address or
@@ -3333,12 +4125,20 @@
* of new data availability is sent.
* If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
* of new data availability is sent unconditionally.
+ * If **0** is specified in *flags*, an adaptive notification
+ * of new data availability is sent.
+ *
+ * An adaptive notification is a notification sent whenever the user-space
+ * process has caught up and consumed all available payloads. In case the user-space
+ * process is still processing a previous payload, then no notification is needed
+ * as it will process the newly added payload automatically.
* Return
* 0 on success, or a negative error in case of failure.
*
* void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags)
* Description
* Reserve *size* bytes of payload in a ring buffer *ringbuf*.
+ * *flags* must be 0.
* Return
* Valid pointer with *size* bytes of memory available; NULL,
* otherwise.
@@ -3350,6 +4150,10 @@
* of new data availability is sent.
* If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
* of new data availability is sent unconditionally.
+ * If **0** is specified in *flags*, an adaptive notification
+ * of new data availability is sent.
+ *
+ * See 'bpf_ringbuf_output()' for the definition of adaptive notification.
* Return
* Nothing. Always succeeds.
*
@@ -3360,6 +4164,10 @@
* of new data availability is sent.
* If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
* of new data availability is sent unconditionally.
+ * If **0** is specified in *flags*, an adaptive notification
+ * of new data availability is sent.
+ *
+ * See 'bpf_ringbuf_output()' for the definition of adaptive notification.
* Return
* Nothing. Always succeeds.
*
@@ -3915,6 +4723,301 @@
* * **BPF_MTU_CHK_RET_FRAG_NEEDED**
* * **BPF_MTU_CHK_RET_SEGS_TOOBIG**
*
+ * long bpf_for_each_map_elem(struct bpf_map *map, void *callback_fn, void *callback_ctx, u64 flags)
+ * Description
+ * For each element in **map**, call **callback_fn** function with
+ * **map**, **callback_ctx** and other map-specific parameters.
+ * The **callback_fn** should be a static function and
+ * the **callback_ctx** should be a pointer to the stack.
+ * The **flags** is used to control certain aspects of the helper.
+ * Currently, the **flags** must be 0.
+ *
+ * The following are a list of supported map types and their
+ * respective expected callback signatures:
+ *
+ * BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_PERCPU_HASH,
+ * BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH,
+ * BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PERCPU_ARRAY
+ *
+ * long (\*callback_fn)(struct bpf_map \*map, const void \*key, void \*value, void \*ctx);
+ *
+ * For per_cpu maps, the map_value is the value on the cpu where the
+ * bpf_prog is running.
+ *
+ * If **callback_fn** return 0, the helper will continue to the next
+ * element. If return value is 1, the helper will skip the rest of
+ * elements and return. Other return values are not used now.
+ *
+ * Return
+ * The number of traversed map elements for success, **-EINVAL** for
+ * invalid **flags**.
+ *
+ * long bpf_snprintf(char *str, u32 str_size, const char *fmt, u64 *data, u32 data_len)
+ * Description
+ * Outputs a string into the **str** buffer of size **str_size**
+ * based on a format string stored in a read-only map pointed by
+ * **fmt**.
+ *
+ * Each format specifier in **fmt** corresponds to one u64 element
+ * in the **data** array. For strings and pointers where pointees
+ * are accessed, only the pointer values are stored in the *data*
+ * array. The *data_len* is the size of *data* in bytes - must be
+ * a multiple of 8.
+ *
+ * Formats **%s** and **%p{i,I}{4,6}** require to read kernel
+ * memory. Reading kernel memory may fail due to either invalid
+ * address or valid address but requiring a major memory fault. If
+ * reading kernel memory fails, the string for **%s** will be an
+ * empty string, and the ip address for **%p{i,I}{4,6}** will be 0.
+ * Not returning error to bpf program is consistent with what
+ * **bpf_trace_printk**\ () does for now.
+ *
+ * Return
+ * The strictly positive length of the formatted string, including
+ * the trailing zero character. If the return value is greater than
+ * **str_size**, **str** contains a truncated string, guaranteed to
+ * be zero-terminated except when **str_size** is 0.
+ *
+ * Or **-EBUSY** if the per-CPU memory copy buffer is busy.
+ *
+ * long bpf_sys_bpf(u32 cmd, void *attr, u32 attr_size)
+ * Description
+ * Execute bpf syscall with given arguments.
+ * Return
+ * A syscall result.
+ *
+ * long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags)
+ * Description
+ * Find BTF type with given name and kind in vmlinux BTF or in module's BTFs.
+ * Return
+ * Returns btf_id and btf_obj_fd in lower and upper 32 bits.
+ *
+ * long bpf_sys_close(u32 fd)
+ * Description
+ * Execute close syscall for given FD.
+ * Return
+ * A syscall result.
+ *
+ * long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, u64 flags)
+ * Description
+ * Initialize the timer.
+ * First 4 bits of *flags* specify clockid.
+ * Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed.
+ * All other bits of *flags* are reserved.
+ * The verifier will reject the program if *timer* is not from
+ * the same *map*.
+ * Return
+ * 0 on success.
+ * **-EBUSY** if *timer* is already initialized.
+ * **-EINVAL** if invalid *flags* are passed.
+ * **-EPERM** if *timer* is in a map that doesn't have any user references.
+ * The user space should either hold a file descriptor to a map with timers
+ * or pin such map in bpffs. When map is unpinned or file descriptor is
+ * closed all timers in the map will be cancelled and freed.
+ *
+ * long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn)
+ * Description
+ * Configure the timer to call *callback_fn* static function.
+ * Return
+ * 0 on success.
+ * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier.
+ * **-EPERM** if *timer* is in a map that doesn't have any user references.
+ * The user space should either hold a file descriptor to a map with timers
+ * or pin such map in bpffs. When map is unpinned or file descriptor is
+ * closed all timers in the map will be cancelled and freed.
+ *
+ * long bpf_timer_start(struct bpf_timer *timer, u64 nsecs, u64 flags)
+ * Description
+ * Set timer expiration N nanoseconds from the current time. The
+ * configured callback will be invoked in soft irq context on some cpu
+ * and will not repeat unless another bpf_timer_start() is made.
+ * In such case the next invocation can migrate to a different cpu.
+ * Since struct bpf_timer is a field inside map element the map
+ * owns the timer. The bpf_timer_set_callback() will increment refcnt
+ * of BPF program to make sure that callback_fn code stays valid.
+ * When user space reference to a map reaches zero all timers
+ * in a map are cancelled and corresponding program's refcnts are
+ * decremented. This is done to make sure that Ctrl-C of a user
+ * process doesn't leave any timers running. If map is pinned in
+ * bpffs the callback_fn can re-arm itself indefinitely.
+ * bpf_map_update/delete_elem() helpers and user space sys_bpf commands
+ * cancel and free the timer in the given map element.
+ * The map can contain timers that invoke callback_fn-s from different
+ * programs. The same callback_fn can serve different timers from
+ * different maps if key/value layout matches across maps.
+ * Every bpf_timer_set_callback() can have different callback_fn.
+ *
+ * Return
+ * 0 on success.
+ * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier
+ * or invalid *flags* are passed.
+ *
+ * long bpf_timer_cancel(struct bpf_timer *timer)
+ * Description
+ * Cancel the timer and wait for callback_fn to finish if it was running.
+ * Return
+ * 0 if the timer was not active.
+ * 1 if the timer was active.
+ * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier.
+ * **-EDEADLK** if callback_fn tried to call bpf_timer_cancel() on its
+ * own timer which would have led to a deadlock otherwise.
+ *
+ * u64 bpf_get_func_ip(void *ctx)
+ * Description
+ * Get address of the traced function (for tracing and kprobe programs).
+ * Return
+ * Address of the traced function.
+ *
+ * u64 bpf_get_attach_cookie(void *ctx)
+ * Description
+ * Get bpf_cookie value provided (optionally) during the program
+ * attachment. It might be different for each individual
+ * attachment, even if BPF program itself is the same.
+ * Expects BPF program context *ctx* as a first argument.
+ *
+ * Supported for the following program types:
+ * - kprobe/uprobe;
+ * - tracepoint;
+ * - perf_event.
+ * Return
+ * Value specified by user at BPF link creation/attachment time
+ * or 0, if it was not specified.
+ *
+ * long bpf_task_pt_regs(struct task_struct *task)
+ * Description
+ * Get the struct pt_regs associated with **task**.
+ * Return
+ * A pointer to struct pt_regs.
+ *
+ * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags)
+ * Description
+ * Get branch trace from hardware engines like Intel LBR. The
+ * hardware engine is stopped shortly after the helper is
+ * called. Therefore, the user need to filter branch entries
+ * based on the actual use case. To capture branch trace
+ * before the trigger point of the BPF program, the helper
+ * should be called at the beginning of the BPF program.
+ *
+ * The data is stored as struct perf_branch_entry into output
+ * buffer *entries*. *size* is the size of *entries* in bytes.
+ * *flags* is reserved for now and must be zero.
+ *
+ * Return
+ * On success, number of bytes written to *buf*. On error, a
+ * negative value.
+ *
+ * **-EINVAL** if *flags* is not zero.
+ *
+ * **-ENOENT** if architecture does not support branch records.
+ *
+ * long bpf_trace_vprintk(const char *fmt, u32 fmt_size, const void *data, u32 data_len)
+ * Description
+ * Behaves like **bpf_trace_printk**\ () helper, but takes an array of u64
+ * to format and can handle more format args as a result.
+ *
+ * Arguments are to be used as in **bpf_seq_printf**\ () helper.
+ * Return
+ * The number of bytes written to the buffer, or a negative error
+ * in case of failure.
+ *
+ * struct unix_sock *bpf_skc_to_unix_sock(void *sk)
+ * Description
+ * Dynamically cast a *sk* pointer to a *unix_sock* pointer.
+ * Return
+ * *sk* if casting is valid, or **NULL** otherwise.
+ *
+ * long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res)
+ * Description
+ * Get the address of a kernel symbol, returned in *res*. *res* is
+ * set to 0 if the symbol is not found.
+ * Return
+ * On success, zero. On error, a negative value.
+ *
+ * **-EINVAL** if *flags* is not zero.
+ *
+ * **-EINVAL** if string *name* is not the same size as *name_sz*.
+ *
+ * **-ENOENT** if symbol is not found.
+ *
+ * **-EPERM** if caller does not have permission to obtain kernel address.
+ *
+ * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags)
+ * Description
+ * Find vma of *task* that contains *addr*, call *callback_fn*
+ * function with *task*, *vma*, and *callback_ctx*.
+ * The *callback_fn* should be a static function and
+ * the *callback_ctx* should be a pointer to the stack.
+ * The *flags* is used to control certain aspects of the helper.
+ * Currently, the *flags* must be 0.
+ *
+ * The expected callback signature is
+ *
+ * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx);
+ *
+ * Return
+ * 0 on success.
+ * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*.
+ * **-EBUSY** if failed to try lock mmap_lock.
+ * **-EINVAL** for invalid **flags**.
+ *
+ * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags)
+ * Description
+ * For **nr_loops**, call **callback_fn** function
+ * with **callback_ctx** as the context parameter.
+ * The **callback_fn** should be a static function and
+ * the **callback_ctx** should be a pointer to the stack.
+ * The **flags** is used to control certain aspects of the helper.
+ * Currently, the **flags** must be 0. Currently, nr_loops is
+ * limited to 1 << 23 (~8 million) loops.
+ *
+ * long (\*callback_fn)(u32 index, void \*ctx);
+ *
+ * where **index** is the current index in the loop. The index
+ * is zero-indexed.
+ *
+ * If **callback_fn** returns 0, the helper will continue to the next
+ * loop. If return value is 1, the helper will skip the rest of
+ * the loops and return. Other return values are not used now,
+ * and will be rejected by the verifier.
+ *
+ * Return
+ * The number of loops performed, **-EINVAL** for invalid **flags**,
+ * **-E2BIG** if **nr_loops** exceeds the maximum number of loops.
+ *
+ * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2)
+ * Description
+ * Do strncmp() between **s1** and **s2**. **s1** doesn't need
+ * to be null-terminated and **s1_sz** is the maximum storage
+ * size of **s1**. **s2** must be a read-only string.
+ * Return
+ * An integer less than, equal to, or greater than zero
+ * if the first **s1_sz** bytes of **s1** is found to be
+ * less than, to match, or be greater than **s2**.
+ *
+ * long bpf_get_func_arg(void *ctx, u32 n, u64 *value)
+ * Description
+ * Get **n**-th argument (zero based) of the traced function (for tracing programs)
+ * returned in **value**.
+ *
+ * Return
+ * 0 on success.
+ * **-EINVAL** if n >= arguments count of traced function.
+ *
+ * long bpf_get_func_ret(void *ctx, u64 *value)
+ * Description
+ * Get return value of the traced function (for tracing programs)
+ * in **value**.
+ *
+ * Return
+ * 0 on success.
+ * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN.
+ *
+ * long bpf_get_func_arg_cnt(void *ctx)
+ * Description
+ * Get number of arguments of the traced function (for tracing programs).
+ *
+ * Return
+ * The number of arguments of the traced function.
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
@@ -4081,6 +5184,28 @@
FN(ima_inode_hash), \
FN(sock_from_file), \
FN(check_mtu), \
+ FN(for_each_map_elem), \
+ FN(snprintf), \
+ FN(sys_bpf), \
+ FN(btf_find_by_name_kind), \
+ FN(sys_close), \
+ FN(timer_init), \
+ FN(timer_set_callback), \
+ FN(timer_start), \
+ FN(timer_cancel), \
+ FN(get_func_ip), \
+ FN(get_attach_cookie), \
+ FN(task_pt_regs), \
+ FN(get_branch_snapshot), \
+ FN(trace_vprintk), \
+ FN(skc_to_unix_sock), \
+ FN(kallsyms_lookup_name), \
+ FN(find_vma), \
+ FN(loop), \
+ FN(strncmp), \
+ FN(get_func_arg), \
+ FN(get_func_ret), \
+ FN(get_func_arg_cnt), \
/* */
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
@@ -4174,6 +5299,7 @@
BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3),
BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4),
BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5),
+ BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6),
};
enum {
@@ -4257,6 +5383,12 @@
BPF_F_BPRM_SECUREEXEC = (1ULL << 0),
};
+/* Flags for bpf_redirect_map helper */
+enum {
+ BPF_F_BROADCAST = (1ULL << 3),
+ BPF_F_EXCLUDE_INGRESS = (1ULL << 4),
+};
+
#define __bpf_md_ptr(type, name) \
union { \
type name; \
@@ -4303,6 +5435,8 @@
__u32 gso_segs;
__bpf_md_ptr(struct bpf_sock *, sk);
__u32 gso_size;
+ __u32 :32; /* Padding, future use. */
+ __u64 hwtstamp;
};
struct bpf_tunnel_key {
@@ -4541,6 +5675,20 @@
__u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */
__u32 bind_inany; /* Is sock bound to an INANY address? */
__u32 hash; /* A hash of the packet 4 tuples */
+ /* When reuse->migrating_sk is NULL, it is selecting a sk for the
+ * new incoming connection request (e.g. selecting a listen sk for
+ * the received SYN in the TCP case). reuse->sk is one of the sk
+ * in the reuseport group. The bpf prog can use reuse->sk to learn
+ * the local listening ip/port without looking into the skb.
+ *
+ * When reuse->migrating_sk is not NULL, reuse->sk is closed and
+ * reuse->migrating_sk is the socket that needs to be migrated
+ * to another listening socket. migrating_sk could be a fullsock
+ * sk that is fully established or a reqsk that is in-the-middle
+ * of 3-way handshake.
+ */
+ __bpf_md_ptr(struct bpf_sock *, sk);
+ __bpf_md_ptr(struct bpf_sock *, migrating_sk);
};
#define BPF_TAG_SIZE 8
@@ -4582,6 +5730,7 @@
__u64 run_time_ns;
__u64 run_cnt;
__u64 recursion_misses;
+ __u32 verified_insns;
} __attribute__((aligned(8)));
struct bpf_map_info {
@@ -4599,6 +5748,8 @@
__u32 btf_id;
__u32 btf_key_type_id;
__u32 btf_value_type_id;
+ __u32 :32; /* alignment pad */
+ __u64 map_extra;
} __attribute__((aligned(8)));
struct bpf_btf_info {
@@ -4621,6 +5772,8 @@
} raw_tracepoint;
struct {
__u32 attach_type;
+ __u32 target_obj_id; /* prog_id for PROG_EXT, otherwise btf object id */
+ __u32 target_btf_id; /* BTF type id inside the object */
} tracing;
struct {
__u64 cgroup_id;
@@ -5184,6 +6337,11 @@
__u32 val;
};
+struct bpf_timer {
+ __u64 :64;
+ __u64 :64;
+} __attribute__((aligned(8)));
+
struct bpf_sysctl {
__u32 write; /* Sysctl is being read (= 0) or written (= 1).
* Allows 1,2,4-byte read, but no write.
@@ -5211,7 +6369,10 @@
/* User accessible data for SK_LOOKUP programs. Add new fields at the end. */
struct bpf_sk_lookup {
- __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */
+ union {
+ __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */
+ __u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */
+ };
__u32 family; /* Protocol family (AF_INET, AF_INET6) */
__u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */
@@ -5221,6 +6382,7 @@
__u32 local_ip4; /* Network byte order */
__u32 local_ip6[4]; /* Network byte order */
__u32 local_port; /* Host byte order */
+ __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */
};
/*
@@ -5253,4 +6415,78 @@
BTF_F_ZERO = (1ULL << 3),
};
+/* bpf_core_relo_kind encodes which aspect of captured field/type/enum value
+ * has to be adjusted by relocations. It is emitted by llvm and passed to
+ * libbpf and later to the kernel.
+ */
+enum bpf_core_relo_kind {
+ BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */
+ BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */
+ BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */
+ BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */
+ BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */
+ BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */
+ BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */
+ BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */
+ BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */
+ BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */
+ BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */
+ BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */
+};
+
+/*
+ * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf
+ * and from libbpf to the kernel.
+ *
+ * CO-RE relocation captures the following data:
+ * - insn_off - instruction offset (in bytes) within a BPF program that needs
+ * its insn->imm field to be relocated with actual field info;
+ * - type_id - BTF type ID of the "root" (containing) entity of a relocatable
+ * type or field;
+ * - access_str_off - offset into corresponding .BTF string section. String
+ * interpretation depends on specific relocation kind:
+ * - for field-based relocations, string encodes an accessed field using
+ * a sequence of field and array indices, separated by colon (:). It's
+ * conceptually very close to LLVM's getelementptr ([0]) instruction's
+ * arguments for identifying offset to a field.
+ * - for type-based relocations, strings is expected to be just "0";
+ * - for enum value-based relocations, string contains an index of enum
+ * value within its enum type;
+ * - kind - one of enum bpf_core_relo_kind;
+ *
+ * Example:
+ * struct sample {
+ * int a;
+ * struct {
+ * int b[10];
+ * };
+ * };
+ *
+ * struct sample *s = ...;
+ * int *x = &s->a; // encoded as "0:0" (a is field #0)
+ * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1,
+ * // b is field #0 inside anon struct, accessing elem #5)
+ * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array)
+ *
+ * type_id for all relocs in this example will capture BTF type id of
+ * `struct sample`.
+ *
+ * Such relocation is emitted when using __builtin_preserve_access_index()
+ * Clang built-in, passing expression that captures field address, e.g.:
+ *
+ * bpf_probe_read(&dst, sizeof(dst),
+ * __builtin_preserve_access_index(&src->a.b.c));
+ *
+ * In this case Clang will emit field relocation recording necessary data to
+ * be able to find offset of embedded `a.b.c` field within `src` struct.
+ *
+ * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction
+ */
+struct bpf_core_relo {
+ __u32 insn_off;
+ __u32 type_id;
+ __u32 access_str_off;
+ enum bpf_core_relo_kind kind;
+};
+
#endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/original/uapi/linux/btf.h b/original/uapi/linux/btf.h
index 5a66710..b0d8fea 100644
--- a/original/uapi/linux/btf.h
+++ b/original/uapi/linux/btf.h
@@ -43,7 +43,7 @@
* "size" tells the size of the type it is describing.
*
* "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT,
- * FUNC, FUNC_PROTO and VAR.
+ * FUNC, FUNC_PROTO, VAR, DECL_TAG and TYPE_TAG.
* "type" is a type_id referring to another type.
*/
union {
@@ -52,28 +52,34 @@
};
};
-#define BTF_INFO_KIND(info) (((info) >> 24) & 0x0f)
+#define BTF_INFO_KIND(info) (((info) >> 24) & 0x1f)
#define BTF_INFO_VLEN(info) ((info) & 0xffff)
#define BTF_INFO_KFLAG(info) ((info) >> 31)
-#define BTF_KIND_UNKN 0 /* Unknown */
-#define BTF_KIND_INT 1 /* Integer */
-#define BTF_KIND_PTR 2 /* Pointer */
-#define BTF_KIND_ARRAY 3 /* Array */
-#define BTF_KIND_STRUCT 4 /* Struct */
-#define BTF_KIND_UNION 5 /* Union */
-#define BTF_KIND_ENUM 6 /* Enumeration */
-#define BTF_KIND_FWD 7 /* Forward */
-#define BTF_KIND_TYPEDEF 8 /* Typedef */
-#define BTF_KIND_VOLATILE 9 /* Volatile */
-#define BTF_KIND_CONST 10 /* Const */
-#define BTF_KIND_RESTRICT 11 /* Restrict */
-#define BTF_KIND_FUNC 12 /* Function */
-#define BTF_KIND_FUNC_PROTO 13 /* Function Proto */
-#define BTF_KIND_VAR 14 /* Variable */
-#define BTF_KIND_DATASEC 15 /* Section */
-#define BTF_KIND_MAX BTF_KIND_DATASEC
-#define NR_BTF_KINDS (BTF_KIND_MAX + 1)
+enum {
+ BTF_KIND_UNKN = 0, /* Unknown */
+ BTF_KIND_INT = 1, /* Integer */
+ BTF_KIND_PTR = 2, /* Pointer */
+ BTF_KIND_ARRAY = 3, /* Array */
+ BTF_KIND_STRUCT = 4, /* Struct */
+ BTF_KIND_UNION = 5, /* Union */
+ BTF_KIND_ENUM = 6, /* Enumeration */
+ BTF_KIND_FWD = 7, /* Forward */
+ BTF_KIND_TYPEDEF = 8, /* Typedef */
+ BTF_KIND_VOLATILE = 9, /* Volatile */
+ BTF_KIND_CONST = 10, /* Const */
+ BTF_KIND_RESTRICT = 11, /* Restrict */
+ BTF_KIND_FUNC = 12, /* Function */
+ BTF_KIND_FUNC_PROTO = 13, /* Function Proto */
+ BTF_KIND_VAR = 14, /* Variable */
+ BTF_KIND_DATASEC = 15, /* Section */
+ BTF_KIND_FLOAT = 16, /* Floating point */
+ BTF_KIND_DECL_TAG = 17, /* Decl Tag */
+ BTF_KIND_TYPE_TAG = 18, /* Type Tag */
+
+ NR_BTF_KINDS,
+ BTF_KIND_MAX = NR_BTF_KINDS - 1,
+};
/* For some specific BTF_KIND, "struct btf_type" is immediately
* followed by extra data.
@@ -169,4 +175,15 @@
__u32 size;
};
+/* BTF_KIND_DECL_TAG is followed by a single "struct btf_decl_tag" to describe
+ * additional information related to the tag applied location.
+ * If component_idx == -1, the tag is applied to a struct, union,
+ * variable or function. Otherwise, it is applied to a struct/union
+ * member or a func argument, and component_idx indicates which member
+ * or argument (0 ... vlen-1).
+ */
+struct btf_decl_tag {
+ __s32 component_idx;
+};
+
#endif /* _UAPI__LINUX_BTF_H__ */
diff --git a/original/uapi/linux/btrfs.h b/original/uapi/linux/btrfs.h
index 5df7300..7386199 100644
--- a/original/uapi/linux/btrfs.h
+++ b/original/uapi/linux/btrfs.h
@@ -154,7 +154,7 @@
__u64 tree_bytes_scrubbed; /* # of tree bytes scrubbed */
__u64 read_errors; /* # of read errors encountered (EIO) */
__u64 csum_errors; /* # of failed csum checks */
- __u64 verify_errors; /* # of occurences, where the metadata
+ __u64 verify_errors; /* # of occurrences, where the metadata
* of a tree block did not match the
* expected values, like generation or
* logical */
@@ -174,7 +174,7 @@
__u64 last_physical; /* last physical address scrubbed. In
* case a scrub was aborted, this can
* be used to restart the scrub */
- __u64 unverified_errors; /* # of occurences where a read for a
+ __u64 unverified_errors; /* # of occurrences where a read for a
* full (64k) bio failed, but the re-
* check succeeded for each 4k piece.
* Intermittent error. */
@@ -288,6 +288,7 @@
* first mount when booting older kernel versions.
*/
#define BTRFS_FEATURE_COMPAT_RO_FREE_SPACE_TREE_VALID (1ULL << 1)
+#define BTRFS_FEATURE_COMPAT_RO_VERITY (1ULL << 2)
#define BTRFS_FEATURE_INCOMPAT_MIXED_BACKREF (1ULL << 0)
#define BTRFS_FEATURE_INCOMPAT_DEFAULT_SUBVOL (1ULL << 1)
@@ -770,10 +771,16 @@
*/
#define BTRFS_SEND_FLAG_OMIT_END_CMD 0x4
+/*
+ * Read the protocol version in the structure
+ */
+#define BTRFS_SEND_FLAG_VERSION 0x8
+
#define BTRFS_SEND_FLAG_MASK \
(BTRFS_SEND_FLAG_NO_FILE_DATA | \
BTRFS_SEND_FLAG_OMIT_STREAM_HEADER | \
- BTRFS_SEND_FLAG_OMIT_END_CMD)
+ BTRFS_SEND_FLAG_OMIT_END_CMD | \
+ BTRFS_SEND_FLAG_VERSION)
struct btrfs_ioctl_send_args {
__s64 send_fd; /* in */
@@ -781,7 +788,8 @@
__u64 __user *clone_sources; /* in */
__u64 parent_root; /* in */
__u64 flags; /* in */
- __u64 reserved[4]; /* in */
+ __u32 version; /* in */
+ __u8 reserved[28]; /* in */
};
/*
diff --git a/original/uapi/linux/btrfs_tree.h b/original/uapi/linux/btrfs_tree.h
index 58d7cff..5416f1f 100644
--- a/original/uapi/linux/btrfs_tree.h
+++ b/original/uapi/linux/btrfs_tree.h
@@ -59,7 +59,7 @@
/* for storing balance parameters in the root tree */
#define BTRFS_BALANCE_OBJECTID -4ULL
-/* orhpan objectid for tracking unlinked/truncated files */
+/* orphan objectid for tracking unlinked/truncated files */
#define BTRFS_ORPHAN_OBJECTID -5ULL
/* does write ahead logging to speed up fsyncs */
@@ -118,12 +118,37 @@
#define BTRFS_INODE_REF_KEY 12
#define BTRFS_INODE_EXTREF_KEY 13
#define BTRFS_XATTR_ITEM_KEY 24
+
+/*
+ * fs verity items are stored under two different key types on disk.
+ * The descriptor items:
+ * [ inode objectid, BTRFS_VERITY_DESC_ITEM_KEY, offset ]
+ *
+ * At offset 0, we store a btrfs_verity_descriptor_item which tracks the size
+ * of the descriptor item and some extra data for encryption.
+ * Starting at offset 1, these hold the generic fs verity descriptor. The
+ * latter are opaque to btrfs, we just read and write them as a blob for the
+ * higher level verity code. The most common descriptor size is 256 bytes.
+ *
+ * The merkle tree items:
+ * [ inode objectid, BTRFS_VERITY_MERKLE_ITEM_KEY, offset ]
+ *
+ * These also start at offset 0, and correspond to the merkle tree bytes. When
+ * fsverity asks for page 0 of the merkle tree, we pull up one page starting at
+ * offset 0 for this key type. These are also opaque to btrfs, we're blindly
+ * storing whatever fsverity sends down.
+ */
+#define BTRFS_VERITY_DESC_ITEM_KEY 36
+#define BTRFS_VERITY_MERKLE_ITEM_KEY 37
+
#define BTRFS_ORPHAN_ITEM_KEY 48
/* reserve 2-15 close to the inode for later flexibility */
/*
* dir items are the name -> inode pointers in a directory. There is one
- * for every name in a directory.
+ * for every name in a directory. BTRFS_DIR_LOG_ITEM_KEY is no longer used
+ * but it's still defined here for documentation purposes and to help avoid
+ * having its numerical value reused in the future.
*/
#define BTRFS_DIR_LOG_ITEM_KEY 60
#define BTRFS_DIR_LOG_INDEX_KEY 72
@@ -275,7 +300,7 @@
#define BTRFS_PERSISTENT_ITEM_KEY 249
/*
- * Persistantly stores the device replace state in the device tree.
+ * Persistently stores the device replace state in the device tree.
* The key is built like this: (0, BTRFS_DEV_REPLACE_KEY, 0).
*/
#define BTRFS_DEV_REPLACE_KEY 250
@@ -991,4 +1016,16 @@
__le64 rsv_excl;
} __attribute__ ((__packed__));
+struct btrfs_verity_descriptor_item {
+ /* Size of the verity descriptor in bytes */
+ __le64 size;
+ /*
+ * When we implement support for fscrypt, we will need to encrypt the
+ * Merkle tree for encrypted verity files. These 128 bits are for the
+ * eventual storage of an fscrypt initialization vector.
+ */
+ __le64 reserved[2];
+ __u8 encryption;
+} __attribute__ ((__packed__));
+
#endif /* _BTRFS_CTREE_H_ */
diff --git a/original/uapi/linux/byteorder/big_endian.h b/original/uapi/linux/byteorder/big_endian.h
index 2199adc..80aa5c4 100644
--- a/original/uapi/linux/byteorder/big_endian.h
+++ b/original/uapi/linux/byteorder/big_endian.h
@@ -9,6 +9,7 @@
#define __BIG_ENDIAN_BITFIELD
#endif
+#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/swab.h>
diff --git a/original/uapi/linux/byteorder/little_endian.h b/original/uapi/linux/byteorder/little_endian.h
index 601c904..cd98982 100644
--- a/original/uapi/linux/byteorder/little_endian.h
+++ b/original/uapi/linux/byteorder/little_endian.h
@@ -9,6 +9,7 @@
#define __LITTLE_ENDIAN_BITFIELD
#endif
+#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/swab.h>
diff --git a/original/uapi/linux/can.h b/original/uapi/linux/can.h
index c753535..90801ad 100644
--- a/original/uapi/linux/can.h
+++ b/original/uapi/linux/can.h
@@ -123,8 +123,8 @@
/*
* defined bits for canfd_frame.flags
*
- * The use of struct canfd_frame implies the Extended Data Length (EDL) bit to
- * be set in the CAN frame bitstream on the wire. The EDL bit switch turns
+ * The use of struct canfd_frame implies the FD Frame (FDF) bit to
+ * be set in the CAN frame bitstream on the wire. The FDF bit switch turns
* the CAN controllers bitstream processor into the CAN FD mode which creates
* two new options within the CAN FD frame specification:
*
@@ -135,9 +135,18 @@
* controller only the CANFD_BRS bit is relevant for real CAN controllers when
* building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make
* sense for virtual CAN interfaces to test applications with echoed frames.
+ *
+ * The struct can_frame and struct canfd_frame intentionally share the same
+ * layout to be able to write CAN frame content into a CAN FD frame structure.
+ * When this is done the former differentiation via CAN_MTU / CANFD_MTU gets
+ * lost. CANFD_FDF allows programmers to mark CAN FD frames in the case of
+ * using struct canfd_frame for mixed CAN / CAN FD content (dual use).
+ * N.B. the Kernel APIs do NOT provide mixed CAN / CAN FD content inside of
+ * struct canfd_frame therefore the CANFD_FDF flag is disregarded by Linux.
*/
#define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */
#define CANFD_ESI 0x02 /* error state indicator of the transmitting node */
+#define CANFD_FDF 0x04 /* mark CAN FD for dual use of struct canfd_frame */
/**
* struct canfd_frame - CAN flexible data rate frame structure
diff --git a/original/uapi/linux/can/j1939.h b/original/uapi/linux/can/j1939.h
index df6e821..3893646 100644
--- a/original/uapi/linux/can/j1939.h
+++ b/original/uapi/linux/can/j1939.h
@@ -78,11 +78,20 @@
enum {
J1939_NLA_PAD,
J1939_NLA_BYTES_ACKED,
+ J1939_NLA_TOTAL_SIZE,
+ J1939_NLA_PGN,
+ J1939_NLA_SRC_NAME,
+ J1939_NLA_DEST_NAME,
+ J1939_NLA_SRC_ADDR,
+ J1939_NLA_DEST_ADDR,
};
enum {
J1939_EE_INFO_NONE,
J1939_EE_INFO_TX_ABORT,
+ J1939_EE_INFO_RX_RTS,
+ J1939_EE_INFO_RX_DPO,
+ J1939_EE_INFO_RX_ABORT,
};
struct j1939_filter {
diff --git a/original/uapi/linux/can/netlink.h b/original/uapi/linux/can/netlink.h
index f730d44..02ec32d 100644
--- a/original/uapi/linux/can/netlink.h
+++ b/original/uapi/linux/can/netlink.h
@@ -101,6 +101,8 @@
#define CAN_CTRLMODE_PRESUME_ACK 0x40 /* Ignore missing CAN ACKs */
#define CAN_CTRLMODE_FD_NON_ISO 0x80 /* CAN FD in non-ISO mode */
#define CAN_CTRLMODE_CC_LEN8_DLC 0x100 /* Classic CAN DLC option */
+#define CAN_CTRLMODE_TDC_AUTO 0x200 /* CAN transiver automatically calculates TDCV */
+#define CAN_CTRLMODE_TDC_MANUAL 0x400 /* TDCV is manually set up by user */
/*
* CAN device statistics
@@ -134,10 +136,48 @@
IFLA_CAN_BITRATE_CONST,
IFLA_CAN_DATA_BITRATE_CONST,
IFLA_CAN_BITRATE_MAX,
- __IFLA_CAN_MAX
+ IFLA_CAN_TDC,
+ IFLA_CAN_CTRLMODE_EXT,
+
+ /* add new constants above here */
+ __IFLA_CAN_MAX,
+ IFLA_CAN_MAX = __IFLA_CAN_MAX - 1
};
-#define IFLA_CAN_MAX (__IFLA_CAN_MAX - 1)
+/*
+ * CAN FD Transmitter Delay Compensation (TDC)
+ *
+ * Please refer to struct can_tdc_const and can_tdc in
+ * include/linux/can/bittiming.h for further details.
+ */
+enum {
+ IFLA_CAN_TDC_UNSPEC,
+ IFLA_CAN_TDC_TDCV_MIN, /* u32 */
+ IFLA_CAN_TDC_TDCV_MAX, /* u32 */
+ IFLA_CAN_TDC_TDCO_MIN, /* u32 */
+ IFLA_CAN_TDC_TDCO_MAX, /* u32 */
+ IFLA_CAN_TDC_TDCF_MIN, /* u32 */
+ IFLA_CAN_TDC_TDCF_MAX, /* u32 */
+ IFLA_CAN_TDC_TDCV, /* u32 */
+ IFLA_CAN_TDC_TDCO, /* u32 */
+ IFLA_CAN_TDC_TDCF, /* u32 */
+
+ /* add new constants above here */
+ __IFLA_CAN_TDC,
+ IFLA_CAN_TDC_MAX = __IFLA_CAN_TDC - 1
+};
+
+/*
+ * IFLA_CAN_CTRLMODE_EXT nest: controller mode extended parameters
+ */
+enum {
+ IFLA_CAN_CTRLMODE_UNSPEC,
+ IFLA_CAN_CTRLMODE_SUPPORTED, /* u32 */
+
+ /* add new constants above here */
+ __IFLA_CAN_CTRLMODE,
+ IFLA_CAN_CTRLMODE_MAX = __IFLA_CAN_CTRLMODE - 1
+};
/* u16 termination range: 1..65535 Ohms */
#define CAN_TERMINATION_DISABLED 0
diff --git a/original/uapi/linux/capability.h b/original/uapi/linux/capability.h
index 741985d..463d1ba 100644
--- a/original/uapi/linux/capability.h
+++ b/original/uapi/linux/capability.h
@@ -243,7 +243,6 @@
/* Allow examination and configuration of disk quotas */
/* Allow setting the domainname */
/* Allow setting the hostname */
-/* Allow calling bdflush() */
/* Allow mount() and umount(), setting up new smb connection */
/* Allow some autofs root ioctls */
/* Allow nfsservctl */
@@ -288,6 +287,8 @@
processes and setting the scheduling algorithm used by another
process. */
/* Allow setting cpu affinity on other processes */
+/* Allow setting realtime ioprio class */
+/* Allow setting ioprio class on other processes */
#define CAP_SYS_NICE 23
diff --git a/original/uapi/linux/cdrom.h b/original/uapi/linux/cdrom.h
index 6c34f6e..804ff8d 100644
--- a/original/uapi/linux/cdrom.h
+++ b/original/uapi/linux/cdrom.h
@@ -147,6 +147,8 @@
#define CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */
#define CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */
+#define CDROM_TIMED_MEDIA_CHANGE 0x5396 /* get the timestamp of the last media change */
+
/*******************************************************
* CDROM IOCTL structures
*******************************************************/
@@ -295,6 +297,23 @@
};
};
+/* This struct is used by CDROM_TIMED_MEDIA_CHANGE */
+struct cdrom_timed_media_change_info {
+ __s64 last_media_change; /* Timestamp of the last detected media
+ * change in ms. May be set by caller,
+ * updated upon successful return of
+ * ioctl.
+ */
+ __u64 media_flags; /* Flags returned by ioctl to indicate
+ * media status.
+ */
+};
+#define MEDIA_CHANGED_FLAG 0x1 /* Last detected media change was more
+ * recent than last_media_change set by
+ * caller.
+ */
+/* other bits of media_flags available for future use */
+
/*
* A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336,
* 2340, or 2352 bytes long.
diff --git a/original/uapi/linux/cec-funcs.h b/original/uapi/linux/cec-funcs.h
index 3759002..c3baaea 100644
--- a/original/uapi/linux/cec-funcs.h
+++ b/original/uapi/linux/cec-funcs.h
@@ -1665,7 +1665,7 @@
if (*audio_out_compensated == 3 && msg->len >= 7)
*audio_out_delay = msg->msg[6];
else
- *audio_out_delay = 0;
+ *audio_out_delay = 1;
}
static inline void cec_msg_request_current_latency(struct cec_msg *msg,
diff --git a/original/uapi/linux/cec.h b/original/uapi/linux/cec.h
index 7d1a06c..de936f5 100644
--- a/original/uapi/linux/cec.h
+++ b/original/uapi/linux/cec.h
@@ -396,6 +396,7 @@
* associated with the CEC adapter.
* @type: connector type (if any)
* @drm: drm connector info
+ * @raw: array to pad the union
*/
struct cec_connector_info {
__u32 type;
@@ -453,7 +454,7 @@
* struct cec_event - CEC event structure
* @ts: the timestamp of when the event was sent.
* @event: the event.
- * array.
+ * @flags: event flags.
* @state_change: the event payload for CEC_EVENT_STATE_CHANGE.
* @lost_msgs: the event payload for CEC_EVENT_LOST_MSGS.
* @raw: array to pad the union.
@@ -641,7 +642,7 @@
#define CEC_OP_REC_SEQ_WEDNESDAY 0x08
#define CEC_OP_REC_SEQ_THURSDAY 0x10
#define CEC_OP_REC_SEQ_FRIDAY 0x20
-#define CEC_OP_REC_SEQ_SATERDAY 0x40
+#define CEC_OP_REC_SEQ_SATURDAY 0x40
#define CEC_OP_REC_SEQ_ONCE_ONLY 0x00
#define CEC_MSG_CLEAR_DIGITAL_TIMER 0x99
diff --git a/original/uapi/linux/cifs/cifs_mount.h b/original/uapi/linux/cifs/cifs_mount.h
index 6982920..8e87d27 100644
--- a/original/uapi/linux/cifs/cifs_mount.h
+++ b/original/uapi/linux/cifs/cifs_mount.h
@@ -1,6 +1,5 @@
/* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */
/*
- * include/uapi/linux/cifs/cifs_mount.h
*
* Author(s): Scott Lovenberg (scott.lovenberg@gmail.com)
*
diff --git a/original/uapi/linux/comedi.h b/original/uapi/linux/comedi.h
new file mode 100644
index 0000000..7314e5e
--- /dev/null
+++ b/original/uapi/linux/comedi.h
@@ -0,0 +1,1528 @@
+/* SPDX-License-Identifier: LGPL-2.0+ WITH Linux-syscall-note */
+/*
+ * comedi.h
+ * header file for COMEDI user API
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1998-2001 David A. Schleef <ds@schleef.org>
+ */
+
+#ifndef _COMEDI_H
+#define _COMEDI_H
+
+#define COMEDI_MAJORVERSION 0
+#define COMEDI_MINORVERSION 7
+#define COMEDI_MICROVERSION 76
+#define VERSION "0.7.76"
+
+/* comedi's major device number */
+#define COMEDI_MAJOR 98
+
+/*
+ * maximum number of minor devices. This can be increased, although
+ * kernel structures are currently statically allocated, thus you
+ * don't want this to be much more than you actually use.
+ */
+#define COMEDI_NDEVICES 16
+
+/* number of config options in the config structure */
+#define COMEDI_NDEVCONFOPTS 32
+
+/*
+ * NOTE: 'comedi_config --init-data' is deprecated
+ *
+ * The following indexes in the config options were used by
+ * comedi_config to pass firmware blobs from user space to the
+ * comedi drivers. The request_firmware() hotplug interface is
+ * now used by all comedi drivers instead.
+ */
+
+/* length of nth chunk of firmware data -*/
+#define COMEDI_DEVCONF_AUX_DATA3_LENGTH 25
+#define COMEDI_DEVCONF_AUX_DATA2_LENGTH 26
+#define COMEDI_DEVCONF_AUX_DATA1_LENGTH 27
+#define COMEDI_DEVCONF_AUX_DATA0_LENGTH 28
+/* most significant 32 bits of pointer address (if needed) */
+#define COMEDI_DEVCONF_AUX_DATA_HI 29
+/* least significant 32 bits of pointer address */
+#define COMEDI_DEVCONF_AUX_DATA_LO 30
+#define COMEDI_DEVCONF_AUX_DATA_LENGTH 31 /* total data length */
+
+/* max length of device and driver names */
+#define COMEDI_NAMELEN 20
+
+/* packs and unpacks a channel/range number */
+
+#define CR_PACK(chan, rng, aref) \
+ ((((aref) & 0x3) << 24) | (((rng) & 0xff) << 16) | (chan))
+#define CR_PACK_FLAGS(chan, range, aref, flags) \
+ (CR_PACK(chan, range, aref) | ((flags) & CR_FLAGS_MASK))
+
+#define CR_CHAN(a) ((a) & 0xffff)
+#define CR_RANGE(a) (((a) >> 16) & 0xff)
+#define CR_AREF(a) (((a) >> 24) & 0x03)
+
+#define CR_FLAGS_MASK 0xfc000000
+#define CR_ALT_FILTER 0x04000000
+#define CR_DITHER CR_ALT_FILTER
+#define CR_DEGLITCH CR_ALT_FILTER
+#define CR_ALT_SOURCE 0x08000000
+#define CR_EDGE 0x40000000
+#define CR_INVERT 0x80000000
+
+#define AREF_GROUND 0x00 /* analog ref = analog ground */
+#define AREF_COMMON 0x01 /* analog ref = analog common */
+#define AREF_DIFF 0x02 /* analog ref = differential */
+#define AREF_OTHER 0x03 /* analog ref = other (undefined) */
+
+/* counters -- these are arbitrary values */
+#define GPCT_RESET 0x0001
+#define GPCT_SET_SOURCE 0x0002
+#define GPCT_SET_GATE 0x0004
+#define GPCT_SET_DIRECTION 0x0008
+#define GPCT_SET_OPERATION 0x0010
+#define GPCT_ARM 0x0020
+#define GPCT_DISARM 0x0040
+#define GPCT_GET_INT_CLK_FRQ 0x0080
+
+#define GPCT_INT_CLOCK 0x0001
+#define GPCT_EXT_PIN 0x0002
+#define GPCT_NO_GATE 0x0004
+#define GPCT_UP 0x0008
+#define GPCT_DOWN 0x0010
+#define GPCT_HWUD 0x0020
+#define GPCT_SIMPLE_EVENT 0x0040
+#define GPCT_SINGLE_PERIOD 0x0080
+#define GPCT_SINGLE_PW 0x0100
+#define GPCT_CONT_PULSE_OUT 0x0200
+#define GPCT_SINGLE_PULSE_OUT 0x0400
+
+/* instructions */
+
+#define INSN_MASK_WRITE 0x8000000
+#define INSN_MASK_READ 0x4000000
+#define INSN_MASK_SPECIAL 0x2000000
+
+#define INSN_READ (0 | INSN_MASK_READ)
+#define INSN_WRITE (1 | INSN_MASK_WRITE)
+#define INSN_BITS (2 | INSN_MASK_READ | INSN_MASK_WRITE)
+#define INSN_CONFIG (3 | INSN_MASK_READ | INSN_MASK_WRITE)
+#define INSN_DEVICE_CONFIG (INSN_CONFIG | INSN_MASK_SPECIAL)
+#define INSN_GTOD (4 | INSN_MASK_READ | INSN_MASK_SPECIAL)
+#define INSN_WAIT (5 | INSN_MASK_WRITE | INSN_MASK_SPECIAL)
+#define INSN_INTTRIG (6 | INSN_MASK_WRITE | INSN_MASK_SPECIAL)
+
+/* command flags */
+/* These flags are used in comedi_cmd structures */
+
+#define CMDF_BOGUS 0x00000001 /* do the motions */
+
+/* try to use a real-time interrupt while performing command */
+#define CMDF_PRIORITY 0x00000008
+
+/* wake up on end-of-scan events */
+#define CMDF_WAKE_EOS 0x00000020
+
+#define CMDF_WRITE 0x00000040
+
+#define CMDF_RAWDATA 0x00000080
+
+/* timer rounding definitions */
+#define CMDF_ROUND_MASK 0x00030000
+#define CMDF_ROUND_NEAREST 0x00000000
+#define CMDF_ROUND_DOWN 0x00010000
+#define CMDF_ROUND_UP 0x00020000
+#define CMDF_ROUND_UP_NEXT 0x00030000
+
+#define COMEDI_EV_START 0x00040000
+#define COMEDI_EV_SCAN_BEGIN 0x00080000
+#define COMEDI_EV_CONVERT 0x00100000
+#define COMEDI_EV_SCAN_END 0x00200000
+#define COMEDI_EV_STOP 0x00400000
+
+/* compatibility definitions */
+#define TRIG_BOGUS CMDF_BOGUS
+#define TRIG_RT CMDF_PRIORITY
+#define TRIG_WAKE_EOS CMDF_WAKE_EOS
+#define TRIG_WRITE CMDF_WRITE
+#define TRIG_ROUND_MASK CMDF_ROUND_MASK
+#define TRIG_ROUND_NEAREST CMDF_ROUND_NEAREST
+#define TRIG_ROUND_DOWN CMDF_ROUND_DOWN
+#define TRIG_ROUND_UP CMDF_ROUND_UP
+#define TRIG_ROUND_UP_NEXT CMDF_ROUND_UP_NEXT
+
+/* trigger sources */
+
+#define TRIG_ANY 0xffffffff
+#define TRIG_INVALID 0x00000000
+
+#define TRIG_NONE 0x00000001 /* never trigger */
+#define TRIG_NOW 0x00000002 /* trigger now + N ns */
+#define TRIG_FOLLOW 0x00000004 /* trigger on next lower level trig */
+#define TRIG_TIME 0x00000008 /* trigger at time N ns */
+#define TRIG_TIMER 0x00000010 /* trigger at rate N ns */
+#define TRIG_COUNT 0x00000020 /* trigger when count reaches N */
+#define TRIG_EXT 0x00000040 /* trigger on external signal N */
+#define TRIG_INT 0x00000080 /* trigger on comedi-internal signal N */
+#define TRIG_OTHER 0x00000100 /* driver defined */
+
+/* subdevice flags */
+
+#define SDF_BUSY 0x0001 /* device is busy */
+#define SDF_BUSY_OWNER 0x0002 /* device is busy with your job */
+#define SDF_LOCKED 0x0004 /* subdevice is locked */
+#define SDF_LOCK_OWNER 0x0008 /* you own lock */
+#define SDF_MAXDATA 0x0010 /* maxdata depends on channel */
+#define SDF_FLAGS 0x0020 /* flags depend on channel */
+#define SDF_RANGETYPE 0x0040 /* range type depends on channel */
+#define SDF_PWM_COUNTER 0x0080 /* PWM can automatically switch off */
+#define SDF_PWM_HBRIDGE 0x0100 /* PWM is signed (H-bridge) */
+#define SDF_CMD 0x1000 /* can do commands (deprecated) */
+#define SDF_SOFT_CALIBRATED 0x2000 /* subdevice uses software calibration */
+#define SDF_CMD_WRITE 0x4000 /* can do output commands */
+#define SDF_CMD_READ 0x8000 /* can do input commands */
+
+/* subdevice can be read (e.g. analog input) */
+#define SDF_READABLE 0x00010000
+/* subdevice can be written (e.g. analog output) */
+#define SDF_WRITABLE 0x00020000
+#define SDF_WRITEABLE SDF_WRITABLE /* spelling error in API */
+/* subdevice does not have externally visible lines */
+#define SDF_INTERNAL 0x00040000
+#define SDF_GROUND 0x00100000 /* can do aref=ground */
+#define SDF_COMMON 0x00200000 /* can do aref=common */
+#define SDF_DIFF 0x00400000 /* can do aref=diff */
+#define SDF_OTHER 0x00800000 /* can do aref=other */
+#define SDF_DITHER 0x01000000 /* can do dithering */
+#define SDF_DEGLITCH 0x02000000 /* can do deglitching */
+#define SDF_MMAP 0x04000000 /* can do mmap() */
+#define SDF_RUNNING 0x08000000 /* subdevice is acquiring data */
+#define SDF_LSAMPL 0x10000000 /* subdevice uses 32-bit samples */
+#define SDF_PACKED 0x20000000 /* subdevice can do packed DIO */
+
+/* subdevice types */
+
+/**
+ * enum comedi_subdevice_type - COMEDI subdevice types
+ * @COMEDI_SUBD_UNUSED: Unused subdevice.
+ * @COMEDI_SUBD_AI: Analog input.
+ * @COMEDI_SUBD_AO: Analog output.
+ * @COMEDI_SUBD_DI: Digital input.
+ * @COMEDI_SUBD_DO: Digital output.
+ * @COMEDI_SUBD_DIO: Digital input/output.
+ * @COMEDI_SUBD_COUNTER: Counter.
+ * @COMEDI_SUBD_TIMER: Timer.
+ * @COMEDI_SUBD_MEMORY: Memory, EEPROM, DPRAM.
+ * @COMEDI_SUBD_CALIB: Calibration DACs.
+ * @COMEDI_SUBD_PROC: Processor, DSP.
+ * @COMEDI_SUBD_SERIAL: Serial I/O.
+ * @COMEDI_SUBD_PWM: Pulse-Width Modulation output.
+ */
+enum comedi_subdevice_type {
+ COMEDI_SUBD_UNUSED,
+ COMEDI_SUBD_AI,
+ COMEDI_SUBD_AO,
+ COMEDI_SUBD_DI,
+ COMEDI_SUBD_DO,
+ COMEDI_SUBD_DIO,
+ COMEDI_SUBD_COUNTER,
+ COMEDI_SUBD_TIMER,
+ COMEDI_SUBD_MEMORY,
+ COMEDI_SUBD_CALIB,
+ COMEDI_SUBD_PROC,
+ COMEDI_SUBD_SERIAL,
+ COMEDI_SUBD_PWM
+};
+
+/* configuration instructions */
+
+/**
+ * enum comedi_io_direction - COMEDI I/O directions
+ * @COMEDI_INPUT: Input.
+ * @COMEDI_OUTPUT: Output.
+ * @COMEDI_OPENDRAIN: Open-drain (or open-collector) output.
+ *
+ * These are used by the %INSN_CONFIG_DIO_QUERY configuration instruction to
+ * report a direction. They may also be used in other places where a direction
+ * needs to be specified.
+ */
+enum comedi_io_direction {
+ COMEDI_INPUT = 0,
+ COMEDI_OUTPUT = 1,
+ COMEDI_OPENDRAIN = 2
+};
+
+/**
+ * enum configuration_ids - COMEDI configuration instruction codes
+ * @INSN_CONFIG_DIO_INPUT: Configure digital I/O as input.
+ * @INSN_CONFIG_DIO_OUTPUT: Configure digital I/O as output.
+ * @INSN_CONFIG_DIO_OPENDRAIN: Configure digital I/O as open-drain (or open
+ * collector) output.
+ * @INSN_CONFIG_ANALOG_TRIG: Configure analog trigger.
+ * @INSN_CONFIG_ALT_SOURCE: Configure alternate input source.
+ * @INSN_CONFIG_DIGITAL_TRIG: Configure digital trigger.
+ * @INSN_CONFIG_BLOCK_SIZE: Configure block size for DMA transfers.
+ * @INSN_CONFIG_TIMER_1: Configure divisor for external clock.
+ * @INSN_CONFIG_FILTER: Configure a filter.
+ * @INSN_CONFIG_CHANGE_NOTIFY: Configure change notification for digital
+ * inputs. (New drivers should use
+ * %INSN_CONFIG_DIGITAL_TRIG instead.)
+ * @INSN_CONFIG_SERIAL_CLOCK: Configure clock for serial I/O.
+ * @INSN_CONFIG_BIDIRECTIONAL_DATA: Send and receive byte over serial I/O.
+ * @INSN_CONFIG_DIO_QUERY: Query direction of digital I/O channel.
+ * @INSN_CONFIG_PWM_OUTPUT: Configure pulse-width modulator output.
+ * @INSN_CONFIG_GET_PWM_OUTPUT: Get pulse-width modulator output configuration.
+ * @INSN_CONFIG_ARM: Arm a subdevice or channel.
+ * @INSN_CONFIG_DISARM: Disarm a subdevice or channel.
+ * @INSN_CONFIG_GET_COUNTER_STATUS: Get counter status.
+ * @INSN_CONFIG_RESET: Reset a subdevice or channel.
+ * @INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR: Configure counter/timer as
+ * single pulse generator.
+ * @INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR: Configure counter/timer as
+ * pulse train generator.
+ * @INSN_CONFIG_GPCT_QUADRATURE_ENCODER: Configure counter as a quadrature
+ * encoder.
+ * @INSN_CONFIG_SET_GATE_SRC: Set counter/timer gate source.
+ * @INSN_CONFIG_GET_GATE_SRC: Get counter/timer gate source.
+ * @INSN_CONFIG_SET_CLOCK_SRC: Set counter/timer master clock source.
+ * @INSN_CONFIG_GET_CLOCK_SRC: Get counter/timer master clock source.
+ * @INSN_CONFIG_SET_OTHER_SRC: Set counter/timer "other" source.
+ * @INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE: Get size (in bytes) of subdevice's
+ * on-board FIFOs used during streaming
+ * input/output.
+ * @INSN_CONFIG_SET_COUNTER_MODE: Set counter/timer mode.
+ * @INSN_CONFIG_8254_SET_MODE: (Deprecated) Same as
+ * %INSN_CONFIG_SET_COUNTER_MODE.
+ * @INSN_CONFIG_8254_READ_STATUS: Read status of 8254 counter channel.
+ * @INSN_CONFIG_SET_ROUTING: Set routing for a channel.
+ * @INSN_CONFIG_GET_ROUTING: Get routing for a channel.
+ * @INSN_CONFIG_PWM_SET_PERIOD: Set PWM period in nanoseconds.
+ * @INSN_CONFIG_PWM_GET_PERIOD: Get PWM period in nanoseconds.
+ * @INSN_CONFIG_GET_PWM_STATUS: Get PWM status.
+ * @INSN_CONFIG_PWM_SET_H_BRIDGE: Set PWM H bridge duty cycle and polarity for
+ * a relay simultaneously.
+ * @INSN_CONFIG_PWM_GET_H_BRIDGE: Get PWM H bridge duty cycle and polarity.
+ * @INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS: Get the hardware timing restraints,
+ * regardless of trigger sources.
+ */
+enum configuration_ids {
+ INSN_CONFIG_DIO_INPUT = COMEDI_INPUT,
+ INSN_CONFIG_DIO_OUTPUT = COMEDI_OUTPUT,
+ INSN_CONFIG_DIO_OPENDRAIN = COMEDI_OPENDRAIN,
+ INSN_CONFIG_ANALOG_TRIG = 16,
+/* INSN_CONFIG_WAVEFORM = 17, */
+/* INSN_CONFIG_TRIG = 18, */
+/* INSN_CONFIG_COUNTER = 19, */
+ INSN_CONFIG_ALT_SOURCE = 20,
+ INSN_CONFIG_DIGITAL_TRIG = 21,
+ INSN_CONFIG_BLOCK_SIZE = 22,
+ INSN_CONFIG_TIMER_1 = 23,
+ INSN_CONFIG_FILTER = 24,
+ INSN_CONFIG_CHANGE_NOTIFY = 25,
+
+ INSN_CONFIG_SERIAL_CLOCK = 26, /*ALPHA*/
+ INSN_CONFIG_BIDIRECTIONAL_DATA = 27,
+ INSN_CONFIG_DIO_QUERY = 28,
+ INSN_CONFIG_PWM_OUTPUT = 29,
+ INSN_CONFIG_GET_PWM_OUTPUT = 30,
+ INSN_CONFIG_ARM = 31,
+ INSN_CONFIG_DISARM = 32,
+ INSN_CONFIG_GET_COUNTER_STATUS = 33,
+ INSN_CONFIG_RESET = 34,
+ INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001,
+ INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002,
+ INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003,
+ INSN_CONFIG_SET_GATE_SRC = 2001,
+ INSN_CONFIG_GET_GATE_SRC = 2002,
+ INSN_CONFIG_SET_CLOCK_SRC = 2003,
+ INSN_CONFIG_GET_CLOCK_SRC = 2004,
+ INSN_CONFIG_SET_OTHER_SRC = 2005,
+ INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006,
+ INSN_CONFIG_SET_COUNTER_MODE = 4097,
+ INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE,
+ INSN_CONFIG_8254_READ_STATUS = 4098,
+ INSN_CONFIG_SET_ROUTING = 4099,
+ INSN_CONFIG_GET_ROUTING = 4109,
+ INSN_CONFIG_PWM_SET_PERIOD = 5000,
+ INSN_CONFIG_PWM_GET_PERIOD = 5001,
+ INSN_CONFIG_GET_PWM_STATUS = 5002,
+ INSN_CONFIG_PWM_SET_H_BRIDGE = 5003,
+ INSN_CONFIG_PWM_GET_H_BRIDGE = 5004,
+ INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS = 5005,
+};
+
+/**
+ * enum device_configuration_ids - COMEDI configuration instruction codes global
+ * to an entire device.
+ * @INSN_DEVICE_CONFIG_TEST_ROUTE: Validate the possibility of a
+ * globally-named route
+ * @INSN_DEVICE_CONFIG_CONNECT_ROUTE: Connect a globally-named route
+ * @INSN_DEVICE_CONFIG_DISCONNECT_ROUTE:Disconnect a globally-named route
+ * @INSN_DEVICE_CONFIG_GET_ROUTES: Get a list of all globally-named routes
+ * that are valid for a particular device.
+ */
+enum device_config_route_ids {
+ INSN_DEVICE_CONFIG_TEST_ROUTE = 0,
+ INSN_DEVICE_CONFIG_CONNECT_ROUTE = 1,
+ INSN_DEVICE_CONFIG_DISCONNECT_ROUTE = 2,
+ INSN_DEVICE_CONFIG_GET_ROUTES = 3,
+};
+
+/**
+ * enum comedi_digital_trig_op - operations for configuring a digital trigger
+ * @COMEDI_DIGITAL_TRIG_DISABLE: Return digital trigger to its default,
+ * inactive, unconfigured state.
+ * @COMEDI_DIGITAL_TRIG_ENABLE_EDGES: Set rising and/or falling edge inputs
+ * that each can fire the trigger.
+ * @COMEDI_DIGITAL_TRIG_ENABLE_LEVELS: Set a combination of high and/or low
+ * level inputs that can fire the trigger.
+ *
+ * These are used with the %INSN_CONFIG_DIGITAL_TRIG configuration instruction.
+ * The data for the configuration instruction is as follows...
+ *
+ * data[%0] = %INSN_CONFIG_DIGITAL_TRIG
+ *
+ * data[%1] = trigger ID
+ *
+ * data[%2] = configuration operation
+ *
+ * data[%3] = configuration parameter 1
+ *
+ * data[%4] = configuration parameter 2
+ *
+ * data[%5] = configuration parameter 3
+ *
+ * The trigger ID (data[%1]) is used to differentiate multiple digital triggers
+ * belonging to the same subdevice. The configuration operation (data[%2]) is
+ * one of the enum comedi_digital_trig_op values. The configuration
+ * parameters (data[%3], data[%4], and data[%5]) depend on the operation; they
+ * are not used with %COMEDI_DIGITAL_TRIG_DISABLE.
+ *
+ * For %COMEDI_DIGITAL_TRIG_ENABLE_EDGES and %COMEDI_DIGITAL_TRIG_ENABLE_LEVELS,
+ * configuration parameter 1 (data[%3]) contains a "left-shift" value that
+ * specifies the input corresponding to bit 0 of configuration parameters 2
+ * and 3. This is useful if the trigger has more than 32 inputs.
+ *
+ * For %COMEDI_DIGITAL_TRIG_ENABLE_EDGES, configuration parameter 2 (data[%4])
+ * specifies which of up to 32 inputs have rising-edge sensitivity, and
+ * configuration parameter 3 (data[%5]) specifies which of up to 32 inputs
+ * have falling-edge sensitivity that can fire the trigger.
+ *
+ * For %COMEDI_DIGITAL_TRIG_ENABLE_LEVELS, configuration parameter 2 (data[%4])
+ * specifies which of up to 32 inputs must be at a high level, and
+ * configuration parameter 3 (data[%5]) specifies which of up to 32 inputs
+ * must be at a low level for the trigger to fire.
+ *
+ * Some sequences of %INSN_CONFIG_DIGITAL_TRIG instructions may have a (partly)
+ * accumulative effect, depending on the low-level driver. This is useful
+ * when setting up a trigger that has more than 32 inputs, or has a combination
+ * of edge- and level-triggered inputs.
+ */
+enum comedi_digital_trig_op {
+ COMEDI_DIGITAL_TRIG_DISABLE = 0,
+ COMEDI_DIGITAL_TRIG_ENABLE_EDGES = 1,
+ COMEDI_DIGITAL_TRIG_ENABLE_LEVELS = 2
+};
+
+/**
+ * enum comedi_support_level - support level for a COMEDI feature
+ * @COMEDI_UNKNOWN_SUPPORT: Unspecified support for feature.
+ * @COMEDI_SUPPORTED: Feature is supported.
+ * @COMEDI_UNSUPPORTED: Feature is unsupported.
+ */
+enum comedi_support_level {
+ COMEDI_UNKNOWN_SUPPORT = 0,
+ COMEDI_SUPPORTED,
+ COMEDI_UNSUPPORTED
+};
+
+/**
+ * enum comedi_counter_status_flags - counter status bits
+ * @COMEDI_COUNTER_ARMED: Counter is armed.
+ * @COMEDI_COUNTER_COUNTING: Counter is counting.
+ * @COMEDI_COUNTER_TERMINAL_COUNT: Counter reached terminal count.
+ *
+ * These bitwise values are used by the %INSN_CONFIG_GET_COUNTER_STATUS
+ * configuration instruction to report the status of a counter.
+ */
+enum comedi_counter_status_flags {
+ COMEDI_COUNTER_ARMED = 0x1,
+ COMEDI_COUNTER_COUNTING = 0x2,
+ COMEDI_COUNTER_TERMINAL_COUNT = 0x4,
+};
+
+/* ioctls */
+
+#define CIO 'd'
+#define COMEDI_DEVCONFIG _IOW(CIO, 0, struct comedi_devconfig)
+#define COMEDI_DEVINFO _IOR(CIO, 1, struct comedi_devinfo)
+#define COMEDI_SUBDINFO _IOR(CIO, 2, struct comedi_subdinfo)
+#define COMEDI_CHANINFO _IOR(CIO, 3, struct comedi_chaninfo)
+/* _IOWR(CIO, 4, ...) is reserved */
+#define COMEDI_LOCK _IO(CIO, 5)
+#define COMEDI_UNLOCK _IO(CIO, 6)
+#define COMEDI_CANCEL _IO(CIO, 7)
+#define COMEDI_RANGEINFO _IOR(CIO, 8, struct comedi_rangeinfo)
+#define COMEDI_CMD _IOR(CIO, 9, struct comedi_cmd)
+#define COMEDI_CMDTEST _IOR(CIO, 10, struct comedi_cmd)
+#define COMEDI_INSNLIST _IOR(CIO, 11, struct comedi_insnlist)
+#define COMEDI_INSN _IOR(CIO, 12, struct comedi_insn)
+#define COMEDI_BUFCONFIG _IOR(CIO, 13, struct comedi_bufconfig)
+#define COMEDI_BUFINFO _IOWR(CIO, 14, struct comedi_bufinfo)
+#define COMEDI_POLL _IO(CIO, 15)
+#define COMEDI_SETRSUBD _IO(CIO, 16)
+#define COMEDI_SETWSUBD _IO(CIO, 17)
+
+/* structures */
+
+/**
+ * struct comedi_insn - COMEDI instruction
+ * @insn: COMEDI instruction type (%INSN_xxx).
+ * @n: Length of @data[].
+ * @data: Pointer to data array operated on by the instruction.
+ * @subdev: Subdevice index.
+ * @chanspec: A packed "chanspec" value consisting of channel number,
+ * analog range index, analog reference type, and flags.
+ * @unused: Reserved for future use.
+ *
+ * This is used with the %COMEDI_INSN ioctl, and indirectly with the
+ * %COMEDI_INSNLIST ioctl.
+ */
+struct comedi_insn {
+ unsigned int insn;
+ unsigned int n;
+ unsigned int __user *data;
+ unsigned int subdev;
+ unsigned int chanspec;
+ unsigned int unused[3];
+};
+
+/**
+ * struct comedi_insnlist - list of COMEDI instructions
+ * @n_insns: Number of COMEDI instructions.
+ * @insns: Pointer to array COMEDI instructions.
+ *
+ * This is used with the %COMEDI_INSNLIST ioctl.
+ */
+struct comedi_insnlist {
+ unsigned int n_insns;
+ struct comedi_insn __user *insns;
+};
+
+/**
+ * struct comedi_cmd - COMEDI asynchronous acquisition command details
+ * @subdev: Subdevice index.
+ * @flags: Command flags (%CMDF_xxx).
+ * @start_src: "Start acquisition" trigger source (%TRIG_xxx).
+ * @start_arg: "Start acquisition" trigger argument.
+ * @scan_begin_src: "Scan begin" trigger source.
+ * @scan_begin_arg: "Scan begin" trigger argument.
+ * @convert_src: "Convert" trigger source.
+ * @convert_arg: "Convert" trigger argument.
+ * @scan_end_src: "Scan end" trigger source.
+ * @scan_end_arg: "Scan end" trigger argument.
+ * @stop_src: "Stop acquisition" trigger source.
+ * @stop_arg: "Stop acquisition" trigger argument.
+ * @chanlist: Pointer to array of "chanspec" values, containing a
+ * sequence of channel numbers packed with analog range
+ * index, etc.
+ * @chanlist_len: Number of channels in sequence.
+ * @data: Pointer to miscellaneous set-up data (not used).
+ * @data_len: Length of miscellaneous set-up data.
+ *
+ * This is used with the %COMEDI_CMD or %COMEDI_CMDTEST ioctl to set-up
+ * or validate an asynchronous acquisition command. The ioctl may modify
+ * the &struct comedi_cmd and copy it back to the caller.
+ *
+ * Optional command @flags values that can be ORed together...
+ *
+ * %CMDF_BOGUS - makes %COMEDI_CMD ioctl return error %EAGAIN instead of
+ * starting the command.
+ *
+ * %CMDF_PRIORITY - requests "hard real-time" processing (which is not
+ * supported in this version of COMEDI).
+ *
+ * %CMDF_WAKE_EOS - requests the command makes data available for reading
+ * after every "scan" period.
+ *
+ * %CMDF_WRITE - marks the command as being in the "write" (to device)
+ * direction. This does not need to be specified by the caller unless the
+ * subdevice supports commands in either direction.
+ *
+ * %CMDF_RAWDATA - prevents the command from "munging" the data between the
+ * COMEDI sample format and the raw hardware sample format.
+ *
+ * %CMDF_ROUND_NEAREST - requests timing periods to be rounded to nearest
+ * supported values.
+ *
+ * %CMDF_ROUND_DOWN - requests timing periods to be rounded down to supported
+ * values (frequencies rounded up).
+ *
+ * %CMDF_ROUND_UP - requests timing periods to be rounded up to supported
+ * values (frequencies rounded down).
+ *
+ * Trigger source values for @start_src, @scan_begin_src, @convert_src,
+ * @scan_end_src, and @stop_src...
+ *
+ * %TRIG_ANY - "all ones" value used to test which trigger sources are
+ * supported.
+ *
+ * %TRIG_INVALID - "all zeroes" value used to indicate that all requested
+ * trigger sources are invalid.
+ *
+ * %TRIG_NONE - never trigger (often used as a @stop_src value).
+ *
+ * %TRIG_NOW - trigger after '_arg' nanoseconds.
+ *
+ * %TRIG_FOLLOW - trigger follows another event.
+ *
+ * %TRIG_TIMER - trigger every '_arg' nanoseconds.
+ *
+ * %TRIG_COUNT - trigger when count '_arg' is reached.
+ *
+ * %TRIG_EXT - trigger on external signal specified by '_arg'.
+ *
+ * %TRIG_INT - trigger on internal, software trigger specified by '_arg'.
+ *
+ * %TRIG_OTHER - trigger on other, driver-defined signal specified by '_arg'.
+ */
+struct comedi_cmd {
+ unsigned int subdev;
+ unsigned int flags;
+
+ unsigned int start_src;
+ unsigned int start_arg;
+
+ unsigned int scan_begin_src;
+ unsigned int scan_begin_arg;
+
+ unsigned int convert_src;
+ unsigned int convert_arg;
+
+ unsigned int scan_end_src;
+ unsigned int scan_end_arg;
+
+ unsigned int stop_src;
+ unsigned int stop_arg;
+
+ unsigned int *chanlist;
+ unsigned int chanlist_len;
+
+ short __user *data;
+ unsigned int data_len;
+};
+
+/**
+ * struct comedi_chaninfo - used to retrieve per-channel information
+ * @subdev: Subdevice index.
+ * @maxdata_list: Optional pointer to per-channel maximum data values.
+ * @flaglist: Optional pointer to per-channel flags.
+ * @rangelist: Optional pointer to per-channel range types.
+ * @unused: Reserved for future use.
+ *
+ * This is used with the %COMEDI_CHANINFO ioctl to get per-channel information
+ * for the subdevice. Use of this requires knowledge of the number of channels
+ * and subdevice flags obtained using the %COMEDI_SUBDINFO ioctl.
+ *
+ * The @maxdata_list member must be %NULL unless the %SDF_MAXDATA subdevice
+ * flag is set. The @flaglist member must be %NULL unless the %SDF_FLAGS
+ * subdevice flag is set. The @rangelist member must be %NULL unless the
+ * %SDF_RANGETYPE subdevice flag is set. Otherwise, the arrays they point to
+ * must be at least as long as the number of channels.
+ */
+struct comedi_chaninfo {
+ unsigned int subdev;
+ unsigned int __user *maxdata_list;
+ unsigned int __user *flaglist;
+ unsigned int __user *rangelist;
+ unsigned int unused[4];
+};
+
+/**
+ * struct comedi_rangeinfo - used to retrieve the range table for a channel
+ * @range_type: Encodes subdevice index (bits 27:24), channel index
+ * (bits 23:16) and range table length (bits 15:0).
+ * @range_ptr: Pointer to array of @struct comedi_krange to be filled
+ * in with the range table for the channel or subdevice.
+ *
+ * This is used with the %COMEDI_RANGEINFO ioctl to retrieve the range table
+ * for a specific channel (if the subdevice has the %SDF_RANGETYPE flag set to
+ * indicate that the range table depends on the channel), or for the subdevice
+ * as a whole (if the %SDF_RANGETYPE flag is clear, indicating the range table
+ * is shared by all channels).
+ *
+ * The @range_type value is an input to the ioctl and comes from a previous
+ * use of the %COMEDI_SUBDINFO ioctl (if the %SDF_RANGETYPE flag is clear),
+ * or the %COMEDI_CHANINFO ioctl (if the %SDF_RANGETYPE flag is set).
+ */
+struct comedi_rangeinfo {
+ unsigned int range_type;
+ void __user *range_ptr;
+};
+
+/**
+ * struct comedi_krange - describes a range in a range table
+ * @min: Minimum value in millionths (1e-6) of a unit.
+ * @max: Maximum value in millionths (1e-6) of a unit.
+ * @flags: Indicates the units (in bits 7:0) OR'ed with optional flags.
+ *
+ * A range table is associated with a single channel, or with all channels in a
+ * subdevice, and a list of one or more ranges. A %struct comedi_krange
+ * describes the physical range of units for one of those ranges. Sample
+ * values in COMEDI are unsigned from %0 up to some 'maxdata' value. The
+ * mapping from sample values to physical units is assumed to be nomimally
+ * linear (for the purpose of describing the range), with sample value %0
+ * mapping to @min, and the 'maxdata' sample value mapping to @max.
+ *
+ * The currently defined units are %UNIT_volt (%0), %UNIT_mA (%1), and
+ * %UNIT_none (%2). The @min and @max values are the physical range multiplied
+ * by 1e6, so a @max value of %1000000 (with %UNIT_volt) represents a maximal
+ * value of 1 volt.
+ *
+ * The only defined flag value is %RF_EXTERNAL (%0x100), indicating that the
+ * range needs to be multiplied by an external reference.
+ */
+struct comedi_krange {
+ int min;
+ int max;
+ unsigned int flags;
+};
+
+/**
+ * struct comedi_subdinfo - used to retrieve information about a subdevice
+ * @type: Type of subdevice from &enum comedi_subdevice_type.
+ * @n_chan: Number of channels the subdevice supports.
+ * @subd_flags: A mixture of static and dynamic flags describing
+ * aspects of the subdevice and its current state.
+ * @timer_type: Timer type. Always set to %5 ("nanosecond timer").
+ * @len_chanlist: Maximum length of a channel list if the subdevice
+ * supports asynchronous acquisition commands.
+ * @maxdata: Maximum sample value for all channels if the
+ * %SDF_MAXDATA subdevice flag is clear.
+ * @flags: Channel flags for all channels if the %SDF_FLAGS
+ * subdevice flag is clear.
+ * @range_type: The range type for all channels if the %SDF_RANGETYPE
+ * subdevice flag is clear. Encodes the subdevice index
+ * (bits 27:24), a dummy channel index %0 (bits 23:16),
+ * and the range table length (bits 15:0).
+ * @settling_time_0: Not used.
+ * @insn_bits_support: Set to %COMEDI_SUPPORTED if the subdevice supports the
+ * %INSN_BITS instruction, or to %COMEDI_UNSUPPORTED if it
+ * does not.
+ * @unused: Reserved for future use.
+ *
+ * This is used with the %COMEDI_SUBDINFO ioctl which copies an array of
+ * &struct comedi_subdinfo back to user space, with one element per subdevice.
+ * Use of this requires knowledge of the number of subdevices obtained from
+ * the %COMEDI_DEVINFO ioctl.
+ *
+ * These are the @subd_flags values that may be ORed together...
+ *
+ * %SDF_BUSY - the subdevice is busy processing an asynchronous command or a
+ * synchronous instruction.
+ *
+ * %SDF_BUSY_OWNER - the subdevice is busy processing an asynchronous
+ * acquisition command started on the current file object (the file object
+ * issuing the %COMEDI_SUBDINFO ioctl).
+ *
+ * %SDF_LOCKED - the subdevice is locked by a %COMEDI_LOCK ioctl.
+ *
+ * %SDF_LOCK_OWNER - the subdevice is locked by a %COMEDI_LOCK ioctl from the
+ * current file object.
+ *
+ * %SDF_MAXDATA - maximum sample values are channel-specific.
+ *
+ * %SDF_FLAGS - channel flags are channel-specific.
+ *
+ * %SDF_RANGETYPE - range types are channel-specific.
+ *
+ * %SDF_PWM_COUNTER - PWM can switch off automatically.
+ *
+ * %SDF_PWM_HBRIDGE - or PWM is signed (H-bridge).
+ *
+ * %SDF_CMD - the subdevice supports asynchronous commands.
+ *
+ * %SDF_SOFT_CALIBRATED - the subdevice uses software calibration.
+ *
+ * %SDF_CMD_WRITE - the subdevice supports asynchronous commands in the output
+ * ("write") direction.
+ *
+ * %SDF_CMD_READ - the subdevice supports asynchronous commands in the input
+ * ("read") direction.
+ *
+ * %SDF_READABLE - the subdevice is readable (e.g. analog input).
+ *
+ * %SDF_WRITABLE (aliased as %SDF_WRITEABLE) - the subdevice is writable (e.g.
+ * analog output).
+ *
+ * %SDF_INTERNAL - the subdevice has no externally visible lines.
+ *
+ * %SDF_GROUND - the subdevice can use ground as an analog reference.
+ *
+ * %SDF_COMMON - the subdevice can use a common analog reference.
+ *
+ * %SDF_DIFF - the subdevice can use differential inputs (or outputs).
+ *
+ * %SDF_OTHER - the subdevice can use some other analog reference.
+ *
+ * %SDF_DITHER - the subdevice can do dithering.
+ *
+ * %SDF_DEGLITCH - the subdevice can do deglitching.
+ *
+ * %SDF_MMAP - this is never set.
+ *
+ * %SDF_RUNNING - an asynchronous command is still running.
+ *
+ * %SDF_LSAMPL - the subdevice uses "long" (32-bit) samples (for asynchronous
+ * command data).
+ *
+ * %SDF_PACKED - the subdevice packs several DIO samples into a single sample
+ * (for asynchronous command data).
+ *
+ * No "channel flags" (@flags) values are currently defined.
+ */
+struct comedi_subdinfo {
+ unsigned int type;
+ unsigned int n_chan;
+ unsigned int subd_flags;
+ unsigned int timer_type;
+ unsigned int len_chanlist;
+ unsigned int maxdata;
+ unsigned int flags;
+ unsigned int range_type;
+ unsigned int settling_time_0;
+ unsigned int insn_bits_support;
+ unsigned int unused[8];
+};
+
+/**
+ * struct comedi_devinfo - used to retrieve information about a COMEDI device
+ * @version_code: COMEDI version code.
+ * @n_subdevs: Number of subdevices the device has.
+ * @driver_name: Null-terminated COMEDI driver name.
+ * @board_name: Null-terminated COMEDI board name.
+ * @read_subdevice: Index of the current "read" subdevice (%-1 if none).
+ * @write_subdevice: Index of the current "write" subdevice (%-1 if none).
+ * @unused: Reserved for future use.
+ *
+ * This is used with the %COMEDI_DEVINFO ioctl to get basic information about
+ * the device.
+ */
+struct comedi_devinfo {
+ unsigned int version_code;
+ unsigned int n_subdevs;
+ char driver_name[COMEDI_NAMELEN];
+ char board_name[COMEDI_NAMELEN];
+ int read_subdevice;
+ int write_subdevice;
+ int unused[30];
+};
+
+/**
+ * struct comedi_devconfig - used to configure a legacy COMEDI device
+ * @board_name: Null-terminated string specifying the type of board
+ * to configure.
+ * @options: An array of integer configuration options.
+ *
+ * This is used with the %COMEDI_DEVCONFIG ioctl to configure a "legacy" COMEDI
+ * device, such as an ISA card. Not all COMEDI drivers support this. Those
+ * that do either expect the specified board name to match one of a list of
+ * names registered with the COMEDI core, or expect the specified board name
+ * to match the COMEDI driver name itself. The configuration options are
+ * handled in a driver-specific manner.
+ */
+struct comedi_devconfig {
+ char board_name[COMEDI_NAMELEN];
+ int options[COMEDI_NDEVCONFOPTS];
+};
+
+/**
+ * struct comedi_bufconfig - used to set or get buffer size for a subdevice
+ * @subdevice: Subdevice index.
+ * @flags: Not used.
+ * @maximum_size: Maximum allowed buffer size.
+ * @size: Buffer size.
+ * @unused: Reserved for future use.
+ *
+ * This is used with the %COMEDI_BUFCONFIG ioctl to get or configure the
+ * maximum buffer size and current buffer size for a COMEDI subdevice that
+ * supports asynchronous commands. If the subdevice does not support
+ * asynchronous commands, @maximum_size and @size are ignored and set to 0.
+ *
+ * On ioctl input, non-zero values of @maximum_size and @size specify a
+ * new maximum size and new current size (in bytes), respectively. These
+ * will by rounded up to a multiple of %PAGE_SIZE. Specifying a new maximum
+ * size requires admin capabilities.
+ *
+ * On ioctl output, @maximum_size and @size and set to the current maximum
+ * buffer size and current buffer size, respectively.
+ */
+struct comedi_bufconfig {
+ unsigned int subdevice;
+ unsigned int flags;
+
+ unsigned int maximum_size;
+ unsigned int size;
+
+ unsigned int unused[4];
+};
+
+/**
+ * struct comedi_bufinfo - used to manipulate buffer position for a subdevice
+ * @subdevice: Subdevice index.
+ * @bytes_read: Specify amount to advance read position for an
+ * asynchronous command in the input ("read") direction.
+ * @buf_write_ptr: Current write position (index) within the buffer.
+ * @buf_read_ptr: Current read position (index) within the buffer.
+ * @buf_write_count: Total amount written, modulo 2^32.
+ * @buf_read_count: Total amount read, modulo 2^32.
+ * @bytes_written: Specify amount to advance write position for an
+ * asynchronous command in the output ("write") direction.
+ * @unused: Reserved for future use.
+ *
+ * This is used with the %COMEDI_BUFINFO ioctl to optionally advance the
+ * current read or write position in an asynchronous acquisition data buffer,
+ * and to get the current read and write positions in the buffer.
+ */
+struct comedi_bufinfo {
+ unsigned int subdevice;
+ unsigned int bytes_read;
+
+ unsigned int buf_write_ptr;
+ unsigned int buf_read_ptr;
+ unsigned int buf_write_count;
+ unsigned int buf_read_count;
+
+ unsigned int bytes_written;
+
+ unsigned int unused[4];
+};
+
+/* range stuff */
+
+#define __RANGE(a, b) ((((a) & 0xffff) << 16) | ((b) & 0xffff))
+
+#define RANGE_OFFSET(a) (((a) >> 16) & 0xffff)
+#define RANGE_LENGTH(b) ((b) & 0xffff)
+
+#define RF_UNIT(flags) ((flags) & 0xff)
+#define RF_EXTERNAL 0x100
+
+#define UNIT_volt 0
+#define UNIT_mA 1
+#define UNIT_none 2
+
+#define COMEDI_MIN_SPEED 0xffffffffu
+
+/**********************************************************/
+/* everything after this line is ALPHA */
+/**********************************************************/
+
+/*
+ * 8254 specific configuration.
+ *
+ * It supports two config commands:
+ *
+ * 0 ID: INSN_CONFIG_SET_COUNTER_MODE
+ * 1 8254 Mode
+ * I8254_MODE0, I8254_MODE1, ..., I8254_MODE5
+ * OR'ed with:
+ * I8254_BCD, I8254_BINARY
+ *
+ * 0 ID: INSN_CONFIG_8254_READ_STATUS
+ * 1 <-- Status byte returned here.
+ * B7 = Output
+ * B6 = NULL Count
+ * B5 - B0 Current mode.
+ */
+
+enum i8254_mode {
+ I8254_MODE0 = (0 << 1), /* Interrupt on terminal count */
+ I8254_MODE1 = (1 << 1), /* Hardware retriggerable one-shot */
+ I8254_MODE2 = (2 << 1), /* Rate generator */
+ I8254_MODE3 = (3 << 1), /* Square wave mode */
+ I8254_MODE4 = (4 << 1), /* Software triggered strobe */
+ /* Hardware triggered strobe (retriggerable) */
+ I8254_MODE5 = (5 << 1),
+ /* Use binary-coded decimal instead of binary (pretty useless) */
+ I8254_BCD = 1,
+ I8254_BINARY = 0
+};
+
+/* *** BEGIN GLOBALLY-NAMED NI TERMINALS/SIGNALS *** */
+
+/*
+ * Common National Instruments Terminal/Signal names.
+ * Some of these have no NI_ prefix as they are useful for non-NI hardware, such
+ * as those that utilize the PXI/RTSI trigger lines.
+ *
+ * NOTE ABOUT THE CHOICE OF NAMES HERE AND THE CAMELSCRIPT:
+ * The choice to use CamelScript and the exact names below is for
+ * maintainability, clarity, similarity to manufacturer's documentation,
+ * _and_ a mitigation for confusion that has plagued the use of these drivers
+ * for years!
+ *
+ * More detail:
+ * There have been significant confusions over the past many years for users
+ * when trying to understand how to connect to/from signals and terminals on
+ * NI hardware using comedi. The major reason for this is that the actual
+ * register values were exposed and required to be used by users. Several
+ * major reasons exist why this caused major confusion for users:
+ * 1) The register values are _NOT_ in user documentation, but rather in
+ * arcane locations, such as a few register programming manuals that are
+ * increasingly hard to find and the NI MHDDK (comments in example code).
+ * There is no one place to find the various valid values of the registers.
+ * 2) The register values are _NOT_ completely consistent. There is no way to
+ * gain any sense of intuition of which values, or even enums one should use
+ * for various registers. There was some attempt in prior use of comedi to
+ * name enums such that a user might know which enums should be used for
+ * varying purposes, but the end-user had to gain a knowledge of register
+ * values to correctly wield this approach.
+ * 3) The names for signals and registers found in the various register level
+ * programming manuals and vendor-provided documentation are _not_ even
+ * close to the same names that are in the end-user documentation.
+ *
+ * Similar, albeit less, confusion plagued NI's previous version of their own
+ * drivers. Earlier than 2003, NI greatly simplified the situation for users
+ * by releasing a new API that abstracted the names of signals/terminals to a
+ * common and intuitive set of names.
+ *
+ * The names below mirror the names chosen and well documented by NI. These
+ * names are exposed to the user via the comedilib user library. By keeping
+ * the names below, in spite of the use of CamelScript, maintenance will be
+ * greatly eased and confusion for users _and_ comedi developers will be
+ * greatly reduced.
+ */
+
+/*
+ * Base of abstracted NI names.
+ * The first 16 bits of *_arg are reserved for channel selection.
+ * Since we only actually need the first 4 or 5 bits for all register values on
+ * NI select registers anyways, we'll identify all values >= (1<<15) as being an
+ * abstracted NI signal/terminal name.
+ * These values are also used/returned by INSN_DEVICE_CONFIG_TEST_ROUTE,
+ * INSN_DEVICE_CONFIG_CONNECT_ROUTE, INSN_DEVICE_CONFIG_DISCONNECT_ROUTE,
+ * and INSN_DEVICE_CONFIG_GET_ROUTES.
+ */
+#define NI_NAMES_BASE 0x8000u
+
+#define _TERM_N(base, n, x) ((base) + ((x) & ((n) - 1)))
+
+/*
+ * not necessarily all allowed 64 PFIs are valid--certainly not for all devices
+ */
+#define NI_PFI(x) _TERM_N(NI_NAMES_BASE, 64, x)
+/* 8 trigger lines by standard, Some devices cannot talk to all eight. */
+#define TRIGGER_LINE(x) _TERM_N(NI_PFI(-1) + 1, 8, x)
+/* 4 RTSI shared MUXes to route signals to/from TRIGGER_LINES on NI hardware */
+#define NI_RTSI_BRD(x) _TERM_N(TRIGGER_LINE(-1) + 1, 4, x)
+
+/* *** Counter/timer names : 8 counters max *** */
+#define NI_MAX_COUNTERS 8
+#define NI_COUNTER_NAMES_BASE (NI_RTSI_BRD(-1) + 1)
+#define NI_CtrSource(x) _TERM_N(NI_COUNTER_NAMES_BASE, NI_MAX_COUNTERS, x)
+/* Gate, Aux, A,B,Z are all treated, at times as gates */
+#define NI_GATES_NAMES_BASE (NI_CtrSource(-1) + 1)
+#define NI_CtrGate(x) _TERM_N(NI_GATES_NAMES_BASE, NI_MAX_COUNTERS, x)
+#define NI_CtrAux(x) _TERM_N(NI_CtrGate(-1) + 1, NI_MAX_COUNTERS, x)
+#define NI_CtrA(x) _TERM_N(NI_CtrAux(-1) + 1, NI_MAX_COUNTERS, x)
+#define NI_CtrB(x) _TERM_N(NI_CtrA(-1) + 1, NI_MAX_COUNTERS, x)
+#define NI_CtrZ(x) _TERM_N(NI_CtrB(-1) + 1, NI_MAX_COUNTERS, x)
+#define NI_GATES_NAMES_MAX NI_CtrZ(-1)
+#define NI_CtrArmStartTrigger(x) _TERM_N(NI_CtrZ(-1) + 1, NI_MAX_COUNTERS, x)
+#define NI_CtrInternalOutput(x) \
+ _TERM_N(NI_CtrArmStartTrigger(-1) + 1, NI_MAX_COUNTERS, x)
+/** external pin(s) labeled conveniently as Ctr<i>Out. */
+#define NI_CtrOut(x) _TERM_N(NI_CtrInternalOutput(-1) + 1, NI_MAX_COUNTERS, x)
+/** For Buffered sampling of ctr -- x series capability. */
+#define NI_CtrSampleClock(x) _TERM_N(NI_CtrOut(-1) + 1, NI_MAX_COUNTERS, x)
+#define NI_COUNTER_NAMES_MAX NI_CtrSampleClock(-1)
+
+enum ni_common_signal_names {
+ /* PXI_Star: this is a non-NI-specific signal */
+ PXI_Star = NI_COUNTER_NAMES_MAX + 1,
+ PXI_Clk10,
+ PXIe_Clk100,
+ NI_AI_SampleClock,
+ NI_AI_SampleClockTimebase,
+ NI_AI_StartTrigger,
+ NI_AI_ReferenceTrigger,
+ NI_AI_ConvertClock,
+ NI_AI_ConvertClockTimebase,
+ NI_AI_PauseTrigger,
+ NI_AI_HoldCompleteEvent,
+ NI_AI_HoldComplete,
+ NI_AI_ExternalMUXClock,
+ NI_AI_STOP, /* pulse signal that occurs when a update is finished(?) */
+ NI_AO_SampleClock,
+ NI_AO_SampleClockTimebase,
+ NI_AO_StartTrigger,
+ NI_AO_PauseTrigger,
+ NI_DI_SampleClock,
+ NI_DI_SampleClockTimebase,
+ NI_DI_StartTrigger,
+ NI_DI_ReferenceTrigger,
+ NI_DI_PauseTrigger,
+ NI_DI_InputBufferFull,
+ NI_DI_ReadyForStartEvent,
+ NI_DI_ReadyForTransferEventBurst,
+ NI_DI_ReadyForTransferEventPipelined,
+ NI_DO_SampleClock,
+ NI_DO_SampleClockTimebase,
+ NI_DO_StartTrigger,
+ NI_DO_PauseTrigger,
+ NI_DO_OutputBufferFull,
+ NI_DO_DataActiveEvent,
+ NI_DO_ReadyForStartEvent,
+ NI_DO_ReadyForTransferEvent,
+ NI_MasterTimebase,
+ NI_20MHzTimebase,
+ NI_80MHzTimebase,
+ NI_100MHzTimebase,
+ NI_200MHzTimebase,
+ NI_100kHzTimebase,
+ NI_10MHzRefClock,
+ NI_FrequencyOutput,
+ NI_ChangeDetectionEvent,
+ NI_AnalogComparisonEvent,
+ NI_WatchdogExpiredEvent,
+ NI_WatchdogExpirationTrigger,
+ NI_SCXI_Trig1,
+ NI_LogicLow,
+ NI_LogicHigh,
+ NI_ExternalStrobe,
+ NI_PFI_DO,
+ NI_CaseGround,
+ /* special internal signal used as variable source for RTSI bus: */
+ NI_RGOUT0,
+
+ /* just a name to make the next more convenient, regardless of above */
+ _NI_NAMES_MAX_PLUS_1,
+ NI_NUM_NAMES = _NI_NAMES_MAX_PLUS_1 - NI_NAMES_BASE,
+};
+
+/* *** END GLOBALLY-NAMED NI TERMINALS/SIGNALS *** */
+
+#define NI_USUAL_PFI_SELECT(x) (((x) < 10) ? (0x1 + (x)) : (0xb + (x)))
+#define NI_USUAL_RTSI_SELECT(x) (((x) < 7) ? (0xb + (x)) : 0x1b)
+
+/*
+ * mode bits for NI general-purpose counters, set with
+ * INSN_CONFIG_SET_COUNTER_MODE
+ */
+#define NI_GPCT_COUNTING_MODE_SHIFT 16
+#define NI_GPCT_INDEX_PHASE_BITSHIFT 20
+#define NI_GPCT_COUNTING_DIRECTION_SHIFT 24
+enum ni_gpct_mode_bits {
+ NI_GPCT_GATE_ON_BOTH_EDGES_BIT = 0x4,
+ NI_GPCT_EDGE_GATE_MODE_MASK = 0x18,
+ NI_GPCT_EDGE_GATE_STARTS_STOPS_BITS = 0x0,
+ NI_GPCT_EDGE_GATE_STOPS_STARTS_BITS = 0x8,
+ NI_GPCT_EDGE_GATE_STARTS_BITS = 0x10,
+ NI_GPCT_EDGE_GATE_NO_STARTS_NO_STOPS_BITS = 0x18,
+ NI_GPCT_STOP_MODE_MASK = 0x60,
+ NI_GPCT_STOP_ON_GATE_BITS = 0x00,
+ NI_GPCT_STOP_ON_GATE_OR_TC_BITS = 0x20,
+ NI_GPCT_STOP_ON_GATE_OR_SECOND_TC_BITS = 0x40,
+ NI_GPCT_LOAD_B_SELECT_BIT = 0x80,
+ NI_GPCT_OUTPUT_MODE_MASK = 0x300,
+ NI_GPCT_OUTPUT_TC_PULSE_BITS = 0x100,
+ NI_GPCT_OUTPUT_TC_TOGGLE_BITS = 0x200,
+ NI_GPCT_OUTPUT_TC_OR_GATE_TOGGLE_BITS = 0x300,
+ NI_GPCT_HARDWARE_DISARM_MASK = 0xc00,
+ NI_GPCT_NO_HARDWARE_DISARM_BITS = 0x000,
+ NI_GPCT_DISARM_AT_TC_BITS = 0x400,
+ NI_GPCT_DISARM_AT_GATE_BITS = 0x800,
+ NI_GPCT_DISARM_AT_TC_OR_GATE_BITS = 0xc00,
+ NI_GPCT_LOADING_ON_TC_BIT = 0x1000,
+ NI_GPCT_LOADING_ON_GATE_BIT = 0x4000,
+ NI_GPCT_COUNTING_MODE_MASK = 0x7 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_NORMAL_BITS =
+ 0x0 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_QUADRATURE_X1_BITS =
+ 0x1 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_QUADRATURE_X2_BITS =
+ 0x2 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_QUADRATURE_X4_BITS =
+ 0x3 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_TWO_PULSE_BITS =
+ 0x4 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_COUNTING_MODE_SYNC_SOURCE_BITS =
+ 0x6 << NI_GPCT_COUNTING_MODE_SHIFT,
+ NI_GPCT_INDEX_PHASE_MASK = 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_PHASE_LOW_A_LOW_B_BITS =
+ 0x0 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_PHASE_LOW_A_HIGH_B_BITS =
+ 0x1 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_PHASE_HIGH_A_LOW_B_BITS =
+ 0x2 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_PHASE_HIGH_A_HIGH_B_BITS =
+ 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT,
+ NI_GPCT_INDEX_ENABLE_BIT = 0x400000,
+ NI_GPCT_COUNTING_DIRECTION_MASK =
+ 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_COUNTING_DIRECTION_DOWN_BITS =
+ 0x00 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_COUNTING_DIRECTION_UP_BITS =
+ 0x1 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_COUNTING_DIRECTION_HW_UP_DOWN_BITS =
+ 0x2 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_COUNTING_DIRECTION_HW_GATE_BITS =
+ 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT,
+ NI_GPCT_RELOAD_SOURCE_MASK = 0xc000000,
+ NI_GPCT_RELOAD_SOURCE_FIXED_BITS = 0x0,
+ NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS = 0x4000000,
+ NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS = 0x8000000,
+ NI_GPCT_OR_GATE_BIT = 0x10000000,
+ NI_GPCT_INVERT_OUTPUT_BIT = 0x20000000
+};
+
+/*
+ * Bits for setting a clock source with
+ * INSN_CONFIG_SET_CLOCK_SRC when using NI general-purpose counters.
+ */
+enum ni_gpct_clock_source_bits {
+ NI_GPCT_CLOCK_SRC_SELECT_MASK = 0x3f,
+ NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS = 0x0,
+ NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS = 0x1,
+ NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS = 0x2,
+ NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS = 0x3,
+ NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS = 0x4,
+ NI_GPCT_NEXT_TC_CLOCK_SRC_BITS = 0x5,
+ /* NI 660x-specific */
+ NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS = 0x6,
+ NI_GPCT_PXI10_CLOCK_SRC_BITS = 0x7,
+ NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS = 0x8,
+ NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS = 0x9,
+ NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK = 0x30000000,
+ NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS = 0x0,
+ /* divide source by 2 */
+ NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS = 0x10000000,
+ /* divide source by 8 */
+ NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS = 0x20000000,
+ NI_GPCT_INVERT_CLOCK_SRC_BIT = 0x80000000
+};
+
+/* NI 660x-specific */
+#define NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(x) (0x10 + (x))
+
+#define NI_GPCT_RTSI_CLOCK_SRC_BITS(x) (0x18 + (x))
+
+/* no pfi on NI 660x */
+#define NI_GPCT_PFI_CLOCK_SRC_BITS(x) (0x20 + (x))
+
+/*
+ * Possibilities for setting a gate source with
+ * INSN_CONFIG_SET_GATE_SRC when using NI general-purpose counters.
+ * May be bitwise-or'd with CR_EDGE or CR_INVERT.
+ */
+enum ni_gpct_gate_select {
+ /* m-series gates */
+ NI_GPCT_TIMESTAMP_MUX_GATE_SELECT = 0x0,
+ NI_GPCT_AI_START2_GATE_SELECT = 0x12,
+ NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT = 0x13,
+ NI_GPCT_NEXT_OUT_GATE_SELECT = 0x14,
+ NI_GPCT_AI_START1_GATE_SELECT = 0x1c,
+ NI_GPCT_NEXT_SOURCE_GATE_SELECT = 0x1d,
+ NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT = 0x1e,
+ NI_GPCT_LOGIC_LOW_GATE_SELECT = 0x1f,
+ /* more gates for 660x */
+ NI_GPCT_SOURCE_PIN_i_GATE_SELECT = 0x100,
+ NI_GPCT_GATE_PIN_i_GATE_SELECT = 0x101,
+ /* more gates for 660x "second gate" */
+ NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT = 0x201,
+ NI_GPCT_SELECTED_GATE_GATE_SELECT = 0x21e,
+ /*
+ * m-series "second gate" sources are unknown,
+ * we should add them here with an offset of 0x300 when
+ * known.
+ */
+ NI_GPCT_DISABLED_GATE_SELECT = 0x8000,
+};
+
+#define NI_GPCT_GATE_PIN_GATE_SELECT(x) (0x102 + (x))
+#define NI_GPCT_RTSI_GATE_SELECT(x) NI_USUAL_RTSI_SELECT(x)
+#define NI_GPCT_PFI_GATE_SELECT(x) NI_USUAL_PFI_SELECT(x)
+#define NI_GPCT_UP_DOWN_PIN_GATE_SELECT(x) (0x202 + (x))
+
+/*
+ * Possibilities for setting a source with
+ * INSN_CONFIG_SET_OTHER_SRC when using NI general-purpose counters.
+ */
+enum ni_gpct_other_index {
+ NI_GPCT_SOURCE_ENCODER_A,
+ NI_GPCT_SOURCE_ENCODER_B,
+ NI_GPCT_SOURCE_ENCODER_Z
+};
+
+enum ni_gpct_other_select {
+ /* m-series gates */
+ /* Still unknown, probably only need NI_GPCT_PFI_OTHER_SELECT */
+ NI_GPCT_DISABLED_OTHER_SELECT = 0x8000,
+};
+
+#define NI_GPCT_PFI_OTHER_SELECT(x) NI_USUAL_PFI_SELECT(x)
+
+/*
+ * start sources for ni general-purpose counters for use with
+ * INSN_CONFIG_ARM
+ */
+enum ni_gpct_arm_source {
+ NI_GPCT_ARM_IMMEDIATE = 0x0,
+ /*
+ * Start both the counter and the adjacent paired counter simultaneously
+ */
+ NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1,
+ /*
+ * If the NI_GPCT_HW_ARM bit is set, we will pass the least significant
+ * bits (3 bits for 660x or 5 bits for m-series) through to the
+ * hardware. To select a hardware trigger, pass the appropriate select
+ * bit, e.g.,
+ * NI_GPCT_HW_ARM | NI_GPCT_AI_START1_GATE_SELECT or
+ * NI_GPCT_HW_ARM | NI_GPCT_PFI_GATE_SELECT(pfi_number)
+ */
+ NI_GPCT_HW_ARM = 0x1000,
+ NI_GPCT_ARM_UNKNOWN = NI_GPCT_HW_ARM, /* for backward compatibility */
+};
+
+/* digital filtering options for ni 660x for use with INSN_CONFIG_FILTER. */
+enum ni_gpct_filter_select {
+ NI_GPCT_FILTER_OFF = 0x0,
+ NI_GPCT_FILTER_TIMEBASE_3_SYNC = 0x1,
+ NI_GPCT_FILTER_100x_TIMEBASE_1 = 0x2,
+ NI_GPCT_FILTER_20x_TIMEBASE_1 = 0x3,
+ NI_GPCT_FILTER_10x_TIMEBASE_1 = 0x4,
+ NI_GPCT_FILTER_2x_TIMEBASE_1 = 0x5,
+ NI_GPCT_FILTER_2x_TIMEBASE_3 = 0x6
+};
+
+/*
+ * PFI digital filtering options for ni m-series for use with
+ * INSN_CONFIG_FILTER.
+ */
+enum ni_pfi_filter_select {
+ NI_PFI_FILTER_OFF = 0x0,
+ NI_PFI_FILTER_125ns = 0x1,
+ NI_PFI_FILTER_6425ns = 0x2,
+ NI_PFI_FILTER_2550us = 0x3
+};
+
+/* master clock sources for ni mio boards and INSN_CONFIG_SET_CLOCK_SRC */
+enum ni_mio_clock_source {
+ NI_MIO_INTERNAL_CLOCK = 0,
+ /*
+ * Doesn't work for m-series, use NI_MIO_PLL_RTSI_CLOCK()
+ * the NI_MIO_PLL_* sources are m-series only
+ */
+ NI_MIO_RTSI_CLOCK = 1,
+ NI_MIO_PLL_PXI_STAR_TRIGGER_CLOCK = 2,
+ NI_MIO_PLL_PXI10_CLOCK = 3,
+ NI_MIO_PLL_RTSI0_CLOCK = 4
+};
+
+#define NI_MIO_PLL_RTSI_CLOCK(x) (NI_MIO_PLL_RTSI0_CLOCK + (x))
+
+/*
+ * Signals which can be routed to an NI RTSI pin with INSN_CONFIG_SET_ROUTING.
+ * The numbers assigned are not arbitrary, they correspond to the bits required
+ * to program the board.
+ */
+enum ni_rtsi_routing {
+ NI_RTSI_OUTPUT_ADR_START1 = 0,
+ NI_RTSI_OUTPUT_ADR_START2 = 1,
+ NI_RTSI_OUTPUT_SCLKG = 2,
+ NI_RTSI_OUTPUT_DACUPDN = 3,
+ NI_RTSI_OUTPUT_DA_START1 = 4,
+ NI_RTSI_OUTPUT_G_SRC0 = 5,
+ NI_RTSI_OUTPUT_G_GATE0 = 6,
+ NI_RTSI_OUTPUT_RGOUT0 = 7,
+ NI_RTSI_OUTPUT_RTSI_BRD_0 = 8,
+ /* Pre-m-series always have RTSI clock on line 7 */
+ NI_RTSI_OUTPUT_RTSI_OSC = 12
+};
+
+#define NI_RTSI_OUTPUT_RTSI_BRD(x) (NI_RTSI_OUTPUT_RTSI_BRD_0 + (x))
+
+/*
+ * Signals which can be routed to an NI PFI pin on an m-series board with
+ * INSN_CONFIG_SET_ROUTING. These numbers are also returned by
+ * INSN_CONFIG_GET_ROUTING on pre-m-series boards, even though their routing
+ * cannot be changed. The numbers assigned are not arbitrary, they correspond
+ * to the bits required to program the board.
+ */
+enum ni_pfi_routing {
+ NI_PFI_OUTPUT_PFI_DEFAULT = 0,
+ NI_PFI_OUTPUT_AI_START1 = 1,
+ NI_PFI_OUTPUT_AI_START2 = 2,
+ NI_PFI_OUTPUT_AI_CONVERT = 3,
+ NI_PFI_OUTPUT_G_SRC1 = 4,
+ NI_PFI_OUTPUT_G_GATE1 = 5,
+ NI_PFI_OUTPUT_AO_UPDATE_N = 6,
+ NI_PFI_OUTPUT_AO_START1 = 7,
+ NI_PFI_OUTPUT_AI_START_PULSE = 8,
+ NI_PFI_OUTPUT_G_SRC0 = 9,
+ NI_PFI_OUTPUT_G_GATE0 = 10,
+ NI_PFI_OUTPUT_EXT_STROBE = 11,
+ NI_PFI_OUTPUT_AI_EXT_MUX_CLK = 12,
+ NI_PFI_OUTPUT_GOUT0 = 13,
+ NI_PFI_OUTPUT_GOUT1 = 14,
+ NI_PFI_OUTPUT_FREQ_OUT = 15,
+ NI_PFI_OUTPUT_PFI_DO = 16,
+ NI_PFI_OUTPUT_I_ATRIG = 17,
+ NI_PFI_OUTPUT_RTSI0 = 18,
+ NI_PFI_OUTPUT_PXI_STAR_TRIGGER_IN = 26,
+ NI_PFI_OUTPUT_SCXI_TRIG1 = 27,
+ NI_PFI_OUTPUT_DIO_CHANGE_DETECT_RTSI = 28,
+ NI_PFI_OUTPUT_CDI_SAMPLE = 29,
+ NI_PFI_OUTPUT_CDO_UPDATE = 30
+};
+
+#define NI_PFI_OUTPUT_RTSI(x) (NI_PFI_OUTPUT_RTSI0 + (x))
+
+/*
+ * Signals which can be routed to output on a NI PFI pin on a 660x board
+ * with INSN_CONFIG_SET_ROUTING. The numbers assigned are
+ * not arbitrary, they correspond to the bits required
+ * to program the board. Lines 0 to 7 can only be set to
+ * NI_660X_PFI_OUTPUT_DIO. Lines 32 to 39 can only be set to
+ * NI_660X_PFI_OUTPUT_COUNTER.
+ */
+enum ni_660x_pfi_routing {
+ NI_660X_PFI_OUTPUT_COUNTER = 1, /* counter */
+ NI_660X_PFI_OUTPUT_DIO = 2, /* static digital output */
+};
+
+/*
+ * NI External Trigger lines. These values are not arbitrary, but are related
+ * to the bits required to program the board (offset by 1 for historical
+ * reasons).
+ */
+#define NI_EXT_PFI(x) (NI_USUAL_PFI_SELECT(x) - 1)
+#define NI_EXT_RTSI(x) (NI_USUAL_RTSI_SELECT(x) - 1)
+
+/*
+ * Clock sources for CDIO subdevice on NI m-series boards. Used as the
+ * scan_begin_arg for a comedi_command. These sources may also be bitwise-or'd
+ * with CR_INVERT to change polarity.
+ */
+enum ni_m_series_cdio_scan_begin_src {
+ NI_CDIO_SCAN_BEGIN_SRC_GROUND = 0,
+ NI_CDIO_SCAN_BEGIN_SRC_AI_START = 18,
+ NI_CDIO_SCAN_BEGIN_SRC_AI_CONVERT = 19,
+ NI_CDIO_SCAN_BEGIN_SRC_PXI_STAR_TRIGGER = 20,
+ NI_CDIO_SCAN_BEGIN_SRC_G0_OUT = 28,
+ NI_CDIO_SCAN_BEGIN_SRC_G1_OUT = 29,
+ NI_CDIO_SCAN_BEGIN_SRC_ANALOG_TRIGGER = 30,
+ NI_CDIO_SCAN_BEGIN_SRC_AO_UPDATE = 31,
+ NI_CDIO_SCAN_BEGIN_SRC_FREQ_OUT = 32,
+ NI_CDIO_SCAN_BEGIN_SRC_DIO_CHANGE_DETECT_IRQ = 33
+};
+
+#define NI_CDIO_SCAN_BEGIN_SRC_PFI(x) NI_USUAL_PFI_SELECT(x)
+#define NI_CDIO_SCAN_BEGIN_SRC_RTSI(x) NI_USUAL_RTSI_SELECT(x)
+
+/*
+ * scan_begin_src for scan_begin_arg==TRIG_EXT with analog output command on NI
+ * boards. These scan begin sources can also be bitwise-or'd with CR_INVERT to
+ * change polarity.
+ */
+#define NI_AO_SCAN_BEGIN_SRC_PFI(x) NI_USUAL_PFI_SELECT(x)
+#define NI_AO_SCAN_BEGIN_SRC_RTSI(x) NI_USUAL_RTSI_SELECT(x)
+
+/*
+ * Bits for setting a clock source with
+ * INSN_CONFIG_SET_CLOCK_SRC when using NI frequency output subdevice.
+ */
+enum ni_freq_out_clock_source_bits {
+ NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC, /* 10 MHz */
+ NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC /* 100 KHz */
+};
+
+/*
+ * Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
+ * 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver).
+ */
+enum amplc_dio_clock_source {
+ /*
+ * Per channel external clock
+ * input/output pin (pin is only an
+ * input when clock source set to this value,
+ * otherwise it is an output)
+ */
+ AMPLC_DIO_CLK_CLKN,
+ AMPLC_DIO_CLK_10MHZ, /* 10 MHz internal clock */
+ AMPLC_DIO_CLK_1MHZ, /* 1 MHz internal clock */
+ AMPLC_DIO_CLK_100KHZ, /* 100 kHz internal clock */
+ AMPLC_DIO_CLK_10KHZ, /* 10 kHz internal clock */
+ AMPLC_DIO_CLK_1KHZ, /* 1 kHz internal clock */
+ /*
+ * Output of preceding counter channel
+ * (for channel 0, preceding counter
+ * channel is channel 2 on preceding
+ * counter subdevice, for first counter
+ * subdevice, preceding counter
+ * subdevice is the last counter
+ * subdevice)
+ */
+ AMPLC_DIO_CLK_OUTNM1,
+ AMPLC_DIO_CLK_EXT, /* per chip external input pin */
+ /* the following are "enhanced" clock sources for PCIe models */
+ AMPLC_DIO_CLK_VCC, /* clock input HIGH */
+ AMPLC_DIO_CLK_GND, /* clock input LOW */
+ AMPLC_DIO_CLK_PAT_PRESENT, /* "pattern present" signal */
+ AMPLC_DIO_CLK_20MHZ /* 20 MHz internal clock */
+};
+
+/*
+ * Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
+ * timer subdevice on some Amplicon DIO PCIe boards (amplc_dio200 driver).
+ */
+enum amplc_dio_ts_clock_src {
+ AMPLC_DIO_TS_CLK_1GHZ, /* 1 ns period with 20 ns granularity */
+ AMPLC_DIO_TS_CLK_1MHZ, /* 1 us period */
+ AMPLC_DIO_TS_CLK_1KHZ /* 1 ms period */
+};
+
+/*
+ * Values for setting a gate source with INSN_CONFIG_SET_GATE_SRC for
+ * 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver).
+ */
+enum amplc_dio_gate_source {
+ AMPLC_DIO_GAT_VCC, /* internal high logic level */
+ AMPLC_DIO_GAT_GND, /* internal low logic level */
+ AMPLC_DIO_GAT_GATN, /* per channel external gate input */
+ /*
+ * negated output of counter channel minus 2
+ * (for channels 0 or 1, channel minus 2 is channel 1 or 2 on
+ * the preceding counter subdevice, for the first counter subdevice
+ * the preceding counter subdevice is the last counter subdevice)
+ */
+ AMPLC_DIO_GAT_NOUTNM2,
+ AMPLC_DIO_GAT_RESERVED4,
+ AMPLC_DIO_GAT_RESERVED5,
+ AMPLC_DIO_GAT_RESERVED6,
+ AMPLC_DIO_GAT_RESERVED7,
+ /* the following are "enhanced" gate sources for PCIe models */
+ AMPLC_DIO_GAT_NGATN = 6, /* negated per channel gate input */
+ /* non-negated output of counter channel minus 2 */
+ AMPLC_DIO_GAT_OUTNM2,
+ AMPLC_DIO_GAT_PAT_PRESENT, /* "pattern present" signal */
+ AMPLC_DIO_GAT_PAT_OCCURRED, /* "pattern occurred" latched */
+ AMPLC_DIO_GAT_PAT_GONE, /* "pattern gone away" latched */
+ AMPLC_DIO_GAT_NPAT_PRESENT, /* negated "pattern present" */
+ AMPLC_DIO_GAT_NPAT_OCCURRED, /* negated "pattern occurred" */
+ AMPLC_DIO_GAT_NPAT_GONE /* negated "pattern gone away" */
+};
+
+/*
+ * Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for
+ * the counter subdevice on the Kolter Electronic PCI-Counter board
+ * (ke_counter driver).
+ */
+enum ke_counter_clock_source {
+ KE_CLK_20MHZ, /* internal 20MHz (default) */
+ KE_CLK_4MHZ, /* internal 4MHz (option) */
+ KE_CLK_EXT /* external clock on pin 21 of D-Sub */
+};
+
+#endif /* _COMEDI_H */
diff --git a/original/uapi/linux/counter.h b/original/uapi/linux/counter.h
new file mode 100644
index 0000000..d0aa95a
--- /dev/null
+++ b/original/uapi/linux/counter.h
@@ -0,0 +1,154 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Userspace ABI for Counter character devices
+ * Copyright (C) 2020 William Breathitt Gray
+ */
+#ifndef _UAPI_COUNTER_H_
+#define _UAPI_COUNTER_H_
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* Component type definitions */
+enum counter_component_type {
+ COUNTER_COMPONENT_NONE,
+ COUNTER_COMPONENT_SIGNAL,
+ COUNTER_COMPONENT_COUNT,
+ COUNTER_COMPONENT_FUNCTION,
+ COUNTER_COMPONENT_SYNAPSE_ACTION,
+ COUNTER_COMPONENT_EXTENSION,
+};
+
+/* Component scope definitions */
+enum counter_scope {
+ COUNTER_SCOPE_DEVICE,
+ COUNTER_SCOPE_SIGNAL,
+ COUNTER_SCOPE_COUNT,
+};
+
+/**
+ * struct counter_component - Counter component identification
+ * @type: component type (one of enum counter_component_type)
+ * @scope: component scope (one of enum counter_scope)
+ * @parent: parent ID (matching the ID suffix of the respective parent sysfs
+ * path as described by the ABI documentation file
+ * Documentation/ABI/testing/sysfs-bus-counter)
+ * @id: component ID (matching the ID provided by the respective *_component_id
+ * sysfs attribute of the desired component)
+ *
+ * For example, if the Count 2 ceiling extension of Counter device 4 is desired,
+ * set type equal to COUNTER_COMPONENT_EXTENSION, scope equal to
+ * COUNTER_COUNT_SCOPE, parent equal to 2, and id equal to the value provided by
+ * the respective /sys/bus/counter/devices/counter4/count2/ceiling_component_id
+ * sysfs attribute.
+ */
+struct counter_component {
+ __u8 type;
+ __u8 scope;
+ __u8 parent;
+ __u8 id;
+};
+
+/* Event type definitions */
+enum counter_event_type {
+ /* Count value increased past ceiling */
+ COUNTER_EVENT_OVERFLOW,
+ /* Count value decreased past floor */
+ COUNTER_EVENT_UNDERFLOW,
+ /* Count value increased past ceiling, or decreased past floor */
+ COUNTER_EVENT_OVERFLOW_UNDERFLOW,
+ /* Count value reached threshold */
+ COUNTER_EVENT_THRESHOLD,
+ /* Index signal detected */
+ COUNTER_EVENT_INDEX,
+};
+
+/**
+ * struct counter_watch - Counter component watch configuration
+ * @component: component to watch when event triggers
+ * @event: event that triggers (one of enum counter_event_type)
+ * @channel: event channel (typically 0 unless the device supports concurrent
+ * events of the same type)
+ */
+struct counter_watch {
+ struct counter_component component;
+ __u8 event;
+ __u8 channel;
+};
+
+/*
+ * Queues a Counter watch for the specified event.
+ *
+ * The queued watches will not be applied until COUNTER_ENABLE_EVENTS_IOCTL is
+ * called.
+ */
+#define COUNTER_ADD_WATCH_IOCTL _IOW(0x3E, 0x00, struct counter_watch)
+/*
+ * Enables monitoring the events specified by the Counter watches that were
+ * queued by COUNTER_ADD_WATCH_IOCTL.
+ *
+ * If events are already enabled, the new set of watches replaces the old one.
+ * Calling this ioctl also has the effect of clearing the queue of watches added
+ * by COUNTER_ADD_WATCH_IOCTL.
+ */
+#define COUNTER_ENABLE_EVENTS_IOCTL _IO(0x3E, 0x01)
+/*
+ * Stops monitoring the previously enabled events.
+ */
+#define COUNTER_DISABLE_EVENTS_IOCTL _IO(0x3E, 0x02)
+
+/**
+ * struct counter_event - Counter event data
+ * @timestamp: best estimate of time of event occurrence, in nanoseconds
+ * @value: component value
+ * @watch: component watch configuration
+ * @status: return status (system error number)
+ */
+struct counter_event {
+ __aligned_u64 timestamp;
+ __aligned_u64 value;
+ struct counter_watch watch;
+ __u8 status;
+};
+
+/* Count direction values */
+enum counter_count_direction {
+ COUNTER_COUNT_DIRECTION_FORWARD,
+ COUNTER_COUNT_DIRECTION_BACKWARD,
+};
+
+/* Count mode values */
+enum counter_count_mode {
+ COUNTER_COUNT_MODE_NORMAL,
+ COUNTER_COUNT_MODE_RANGE_LIMIT,
+ COUNTER_COUNT_MODE_NON_RECYCLE,
+ COUNTER_COUNT_MODE_MODULO_N,
+};
+
+/* Count function values */
+enum counter_function {
+ COUNTER_FUNCTION_INCREASE,
+ COUNTER_FUNCTION_DECREASE,
+ COUNTER_FUNCTION_PULSE_DIRECTION,
+ COUNTER_FUNCTION_QUADRATURE_X1_A,
+ COUNTER_FUNCTION_QUADRATURE_X1_B,
+ COUNTER_FUNCTION_QUADRATURE_X2_A,
+ COUNTER_FUNCTION_QUADRATURE_X2_B,
+ COUNTER_FUNCTION_QUADRATURE_X4,
+};
+
+/* Signal values */
+enum counter_signal_level {
+ COUNTER_SIGNAL_LEVEL_LOW,
+ COUNTER_SIGNAL_LEVEL_HIGH,
+};
+
+/* Action mode values */
+enum counter_synapse_action {
+ COUNTER_SYNAPSE_ACTION_NONE,
+ COUNTER_SYNAPSE_ACTION_RISING_EDGE,
+ COUNTER_SYNAPSE_ACTION_FALLING_EDGE,
+ COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
+};
+
+#endif /* _UAPI_COUNTER_H_ */
diff --git a/original/uapi/linux/cxl_mem.h b/original/uapi/linux/cxl_mem.h
index 3155382..8d206f2 100644
--- a/original/uapi/linux/cxl_mem.h
+++ b/original/uapi/linux/cxl_mem.h
@@ -29,6 +29,18 @@
___C(GET_LSA, "Get Label Storage Area"), \
___C(GET_HEALTH_INFO, "Get Health Info"), \
___C(GET_LOG, "Get Log"), \
+ ___C(SET_PARTITION_INFO, "Set Partition Information"), \
+ ___C(SET_LSA, "Set Label Storage Area"), \
+ ___C(GET_ALERT_CONFIG, "Get Alert Configuration"), \
+ ___C(SET_ALERT_CONFIG, "Set Alert Configuration"), \
+ ___C(GET_SHUTDOWN_STATE, "Get Shutdown State"), \
+ ___C(SET_SHUTDOWN_STATE, "Set Shutdown State"), \
+ ___C(GET_POISON, "Get Poison List"), \
+ ___C(INJECT_POISON, "Inject Poison"), \
+ ___C(CLEAR_POISON, "Clear Poison"), \
+ ___C(GET_SCAN_MEDIA_CAPS, "Get Scan Media Capabilities"), \
+ ___C(SCAN_MEDIA, "Scan Media"), \
+ ___C(GET_SCAN_MEDIA, "Get Scan Media Results"), \
___C(MAX, "invalid / last command")
#define ___C(a, b) CXL_MEM_COMMAND_ID_##a
@@ -38,7 +50,7 @@
#define ___C(a, b) { b }
static const struct {
const char *name;
-} cxl_command_names[] = { CXL_CMDS };
+} cxl_command_names[] __attribute__((__unused__)) = { CXL_CMDS };
/*
* Here's how this actually breaks out:
diff --git a/original/uapi/linux/cyclades.h b/original/uapi/linux/cyclades.h
index fc0add2..6225c5a 100644
--- a/original/uapi/linux/cyclades.h
+++ b/original/uapi/linux/cyclades.h
@@ -1,109 +1,27 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
- * linux/include/linux/cyclades.h
- *
- * This file was initially written by
- * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
- * Ivan Passos <ivan@cyclades.com>.
- *
- * This file contains the general definitions for the cyclades.c driver
- *$Log: cyclades.h,v $
- *Revision 3.1 2002/01/29 11:36:16 henrique
- *added throttle field on struct cyclades_port to indicate whether the
- *port is throttled or not
- *
- *Revision 3.1 2000/04/19 18:52:52 ivan
- *converted address fields to unsigned long and added fields for physical
- *addresses on cyclades_card structure;
- *
- *Revision 3.0 1998/11/02 14:20:59 ivan
- *added nports field on cyclades_card structure;
- *
- *Revision 2.5 1998/08/03 16:57:01 ivan
- *added cyclades_idle_stats structure;
- *
- *Revision 2.4 1998/06/01 12:09:53 ivan
- *removed closing_wait2 from cyclades_port structure;
- *
- *Revision 2.3 1998/03/16 18:01:12 ivan
- *changes in the cyclades_port structure to get it closer to the
- *standard serial port structure;
- *added constants for new ioctls;
- *
- *Revision 2.2 1998/02/17 16:50:00 ivan
- *changes in the cyclades_port structure (addition of shutdown_wait and
- *chip_rev variables);
- *added constants for new ioctls and for CD1400 rev. numbers.
- *
- *Revision 2.1 1997/10/24 16:03:00 ivan
- *added rflow (which allows enabling the CD1400 special flow control
- *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
- *cyclades_port structure;
- *added Alpha support
- *
- *Revision 2.0 1997/06/30 10:30:00 ivan
- *added some new doorbell command constants related to IOCTLW and
- *UART error signaling
- *
- *Revision 1.8 1997/06/03 15:30:00 ivan
- *added constant ZFIRM_HLT
- *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
- *
- *Revision 1.7 1997/03/26 10:30:00 daniel
- *new entries at the end of cyclades_port struct to reallocate
- *variables illegally allocated within card memory.
- *
- *Revision 1.6 1996/09/09 18:35:30 bentson
- *fold in changes for Cyclom-Z -- including structures for
- *communicating with board as well modest changes to original
- *structures to support new features.
- *
- *Revision 1.5 1995/11/13 21:13:31 bentson
- *changes suggested by Michael Chastain <mec@duracef.shout.net>
- *to support use of this file in non-kernel applications
- *
- *
- */
#ifndef _UAPI_LINUX_CYCLADES_H
#define _UAPI_LINUX_CYCLADES_H
-#include <linux/types.h>
+#warning "Support for features provided by this header has been removed"
+#warning "Please consider updating your code"
struct cyclades_monitor {
- unsigned long int_count;
- unsigned long char_count;
- unsigned long char_max;
- unsigned long char_last;
+ unsigned long int_count;
+ unsigned long char_count;
+ unsigned long char_max;
+ unsigned long char_last;
};
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
- __kernel_old_time_t in_use; /* Time device has been in use (secs) */
- __kernel_old_time_t recv_idle; /* Time since last char received (secs) */
- __kernel_old_time_t xmit_idle; /* Time since last char transmitted (secs) */
- unsigned long recv_bytes; /* Bytes received */
- unsigned long xmit_bytes; /* Bytes transmitted */
- unsigned long overruns; /* Input overruns */
- unsigned long frame_errs; /* Input framing errors */
- unsigned long parity_errs; /* Input parity errors */
-};
-
-#define CYCLADES_MAGIC 0x4359
-
-#define CYGETMON 0x435901
-#define CYGETTHRESH 0x435902
-#define CYSETTHRESH 0x435903
-#define CYGETDEFTHRESH 0x435904
-#define CYSETDEFTHRESH 0x435905
-#define CYGETTIMEOUT 0x435906
-#define CYSETTIMEOUT 0x435907
-#define CYGETDEFTIMEOUT 0x435908
-#define CYSETDEFTIMEOUT 0x435909
+#define CYGETMON 0x435901
+#define CYGETTHRESH 0x435902
+#define CYSETTHRESH 0x435903
+#define CYGETDEFTHRESH 0x435904
+#define CYSETDEFTHRESH 0x435905
+#define CYGETTIMEOUT 0x435906
+#define CYSETTIMEOUT 0x435907
+#define CYGETDEFTIMEOUT 0x435908
+#define CYSETDEFTIMEOUT 0x435909
#define CYSETRFLOW 0x43590a
#define CYGETRFLOW 0x43590b
#define CYSETRTSDTR_INV 0x43590c
@@ -111,384 +29,7 @@
#define CYZSETPOLLCYCLE 0x43590e
#define CYZGETPOLLCYCLE 0x43590f
#define CYGETCD1400VER 0x435910
-#define CYSETWAIT 0x435912
-#define CYGETWAIT 0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC ('M' << 8)
-#define CZ_NBOARDS (CZIOC|0xfa)
-#define CZ_BOOT_START (CZIOC|0xfb)
-#define CZ_BOOT_DATA (CZIOC|0xfc)
-#define CZ_BOOT_END (CZIOC|0xfd)
-#define CZ_TEST (CZIOC|0xfe)
-
-#define CZ_DEF_POLL (HZ/25)
-
-#define MAX_BOARD 4 /* Max number of boards */
-#define MAX_DEV 256 /* Max number of ports total */
-#define CYZ_MAX_SPEED 921600
-
-#define CYZ_FIFO_SIZE 16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
- unsigned short nboard;
- int status[MAX_BOARD];
- int nchannel[MAX_BOARD];
- int fw_rev[MAX_BOARD];
- unsigned long offset;
- unsigned long data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- * Memory Window Sizes
- */
-
-#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
-#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
- 8Zo V.2 */
-#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
-
-/*
- * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- * normally will access only interested on the fpga_id, fpga_version,
- * start_cpu and stop_cpu.
- */
-
-struct CUSTOM_REG {
- __u32 fpga_id; /* FPGA Identification Register */
- __u32 fpga_version; /* FPGA Version Number Register */
- __u32 cpu_start; /* CPU start Register (write) */
- __u32 cpu_stop; /* CPU stop Register (write) */
- __u32 misc_reg; /* Miscellaneous Register */
- __u32 idt_mode; /* IDT mode Register */
- __u32 uart_irq_status; /* UART IRQ status Register */
- __u32 clear_timer0_irq; /* Clear timer interrupt Register */
- __u32 clear_timer1_irq; /* Clear timer interrupt Register */
- __u32 clear_timer2_irq; /* Clear timer interrupt Register */
- __u32 test_register; /* Test Register */
- __u32 test_count; /* Test Count Register */
- __u32 timer_select; /* Timer select register */
- __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
- __u32 ram_wait_state; /* RAM wait-state Register */
- __u32 uart_wait_state; /* UART wait-state Register */
- __u32 timer_wait_state; /* timer wait-state Register */
- __u32 ack_wait_state; /* ACK wait State Register */
-};
-
-/*
- * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- * registers. This structure can be used to access the 9060 registers
- * (memory mapped).
- */
-
-struct RUNTIME_9060 {
- __u32 loc_addr_range; /* 00h - Local Address Range */
- __u32 loc_addr_base; /* 04h - Local Address Base */
- __u32 loc_arbitr; /* 08h - Local Arbitration */
- __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
- __u32 loc_rom_range; /* 10h - Local ROM Range */
- __u32 loc_rom_base; /* 14h - Local ROM Base */
- __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
- __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
- __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
- __u32 loc_range_io; /* 24h - Local Range for Master IO */
- __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
- __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
- __u32 filler1; /* 30h */
- __u32 filler2; /* 34h */
- __u32 filler3; /* 38h */
- __u32 filler4; /* 3Ch */
- __u32 mail_box_0; /* 40h - Mail Box 0 */
- __u32 mail_box_1; /* 44h - Mail Box 1 */
- __u32 mail_box_2; /* 48h - Mail Box 2 */
- __u32 mail_box_3; /* 4Ch - Mail Box 3 */
- __u32 filler5; /* 50h */
- __u32 filler6; /* 54h */
- __u32 filler7; /* 58h */
- __u32 filler8; /* 5Ch */
- __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
- __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
- __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
- __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
-#define WIN_CREG 0x14000001L /* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define TIMER_BY_1M 0x00 /* clock divided by 1M */
-#define TIMER_BY_256K 0x01 /* clock divided by 256k */
-#define TIMER_BY_128K 0x02 /* clock divided by 128k */
-#define TIMER_BY_32K 0x03 /* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- * This file contains the definitions for interfacing with the
- * Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define MAX_CHAN 64 /* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS 0x00000180L /* signature/pointer address */
-#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
-#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
-#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
-
-#define ZF_TINACT_DEF 1000 /* default inactivity timeout
- (1000 ms) */
-#define ZF_TINACT ZF_TINACT_DEF
-
-struct FIRM_ID {
- __u32 signature; /* ZFIRM/U signature */
- __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define C_OS_LINUX 0x00000030 /* generic Linux system */
-
-/* channel op_mode */
-
-#define C_CH_DISABLE 0x00000000 /* channel is disabled */
-#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
-#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
-#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
-#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
-
-/* comm_parity - parity */
-
-#define C_PR_NONE 0x00000000 /* None */
-#define C_PR_ODD 0x00000001 /* Odd */
-#define C_PR_EVEN 0x00000002 /* Even */
-#define C_PR_MARK 0x00000004 /* Mark */
-#define C_PR_SPACE 0x00000008 /* Space */
-#define C_PR_PARITY 0x000000ff
-
-#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
-#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5 0x00000001
-#define C_DL_CS6 0x00000002
-#define C_DL_CS7 0x00000004
-#define C_DL_CS8 0x00000008
-#define C_DL_CS 0x0000000f
-#define C_DL_1STOP 0x00000010
-#define C_DL_15STOP 0x00000020
-#define C_DL_2STOP 0x00000040
-#define C_DL_STOP 0x000000f0
-
-/* interrupt enabling/status */
-
-#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
-#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
-#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
-#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
-#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
-#define C_IN_MDCD 0x00000100 /* modem DCD change */
-#define C_IN_MDSR 0x00000200 /* modem DSR change */
-#define C_IN_MRI 0x00000400 /* modem RI change */
-#define C_IN_MCTS 0x00000800 /* modem CTS change */
-#define C_IN_RXBRK 0x00001000 /* Break received */
-#define C_IN_PR_ERROR 0x00002000 /* parity error */
-#define C_IN_FR_ERROR 0x00004000 /* frame error */
-#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
-#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
-#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
-#define C_IN_MRTS 0x00040000 /* modem RTS drop */
-#define C_IN_ICHAR 0x00080000
-
-/* flow control */
-
-#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
-#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
-#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
-#define C_FL_SWFLOW 0x0000000f
-
-/* flow status */
-
-#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
-#define C_FS_SENDING 0x00000001 /* UART is sending data */
-#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
- IOCTLM command */
-#define C_RS_RTS 0x00000001 /* RTS */
-#define C_RS_DTR 0x00000004 /* DTR */
-#define C_RS_DCD 0x00000100 /* CD */
-#define C_RS_DSR 0x00000200 /* DSR */
-#define C_RS_RI 0x00000400 /* RI */
-#define C_RS_CTS 0x00000800 /* CTS */
-
-/* commands Host <-> Board */
-
-#define C_CM_RESET 0x01 /* reset/flush buffers */
-#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
-#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
-#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
-#define C_CM_SENDXOFF 0x10 /* send Xoff */
-#define C_CM_SENDXON 0x11 /* send Xon */
-#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
-#define C_CM_SENDBRK 0x41 /* send break */
-#define C_CM_INTBACK 0x42 /* Interrupt back */
-#define C_CM_SET_BREAK 0x43 /* Tx break on */
-#define C_CM_CLR_BREAK 0x44 /* Tx break off */
-#define C_CM_CMD_DONE 0x45 /* Previous command done */
-#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
-#define C_CM_TINACT 0x51 /* set inactivity detection */
-#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
-#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
-#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
-#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
-#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
-#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
-#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
- driver */
-#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
- driver */
-
-#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
-#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
-#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
-#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
-#define C_CM_TXFEMPTY 0x64
-#define C_CM_ICHAR 0x65
-#define C_CM_MDCD 0x70 /* modem DCD change */
-#define C_CM_MDSR 0x71 /* modem DSR change */
-#define C_CM_MRI 0x72 /* modem RI change */
-#define C_CM_MCTS 0x73 /* modem CTS change */
-#define C_CM_MRTS 0x74 /* modem RTS drop */
-#define C_CM_RXBRK 0x84 /* Break received */
-#define C_CM_PR_ERROR 0x85 /* Parity error */
-#define C_CM_FR_ERROR 0x86 /* Frame error */
-#define C_CM_OVR_ERROR 0x87 /* Overrun error */
-#define C_CM_RXOFL 0x88 /* RX buffer overflow */
-#define C_CM_CMDERROR 0x90 /* command error */
-#define C_CM_FATAL 0x91 /* fatal error */
-#define C_CM_HW_RESET 0x92 /* reset board */
-
-/*
- * CH_CTRL - This per port structure contains all parameters
- * that control an specific port. It can be seen as the
- * configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
- __u32 op_mode; /* operation mode */
- __u32 intr_enable; /* interrupt masking */
- __u32 sw_flow; /* SW flow control */
- __u32 flow_status; /* output flow status */
- __u32 comm_baud; /* baud rate - numerically specified */
- __u32 comm_parity; /* parity */
- __u32 comm_data_l; /* data length/stop */
- __u32 comm_flags; /* other flags */
- __u32 hw_flow; /* HW flow control */
- __u32 rs_control; /* RS-232 outputs */
- __u32 rs_status; /* RS-232 inputs */
- __u32 flow_xon; /* xon char */
- __u32 flow_xoff; /* xoff char */
- __u32 hw_overflow; /* hw overflow counter */
- __u32 sw_overflow; /* sw overflow counter */
- __u32 comm_error; /* frame/parity error counter */
- __u32 ichar;
- __u32 filler[7];
-};
-
-
-/*
- * BUF_CTRL - This per channel structure contains
- * all Tx and Rx buffer control for a given channel.
- */
-
-struct BUF_CTRL {
- __u32 flag_dma; /* buffers are in Host memory */
- __u32 tx_bufaddr; /* address of the tx buffer */
- __u32 tx_bufsize; /* tx buffer size */
- __u32 tx_threshold; /* tx low water mark */
- __u32 tx_get; /* tail index tx buf */
- __u32 tx_put; /* head index tx buf */
- __u32 rx_bufaddr; /* address of the rx buffer */
- __u32 rx_bufsize; /* rx buffer size */
- __u32 rx_threshold; /* rx high water mark */
- __u32 rx_get; /* tail index rx buf */
- __u32 rx_put; /* head index rx buf */
- __u32 filler[5]; /* filler to align structures */
-};
-
-/*
- * BOARD_CTRL - This per board structure contains all global
- * control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
- /* static info provided by the on-board CPU */
- __u32 n_channel; /* number of channels */
- __u32 fw_version; /* firmware version */
-
- /* static info provided by the driver */
- __u32 op_system; /* op_system id */
- __u32 dr_version; /* driver version */
-
- /* board control area */
- __u32 inactivity; /* inactivity control */
-
- /* host to FW commands */
- __u32 hcmd_channel; /* channel number */
- __u32 hcmd_param; /* pointer to parameters */
-
- /* FW to Host commands */
- __u32 fwcmd_channel; /* channel number */
- __u32 fwcmd_param; /* pointer to parameters */
- __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
- /* filler so the structures are aligned */
- __u32 filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE (10*MAX_CHAN)
-
-struct INT_QUEUE {
- unsigned char intr_code[QUEUE_SIZE];
- unsigned long channel[QUEUE_SIZE];
- unsigned long param[QUEUE_SIZE];
- unsigned long put;
- unsigned long get;
-};
-
-/*
- * ZFW_CTRL - This is the data structure that includes all other
- * data structures used by the Firmware.
- */
-
-struct ZFW_CTRL {
- struct BOARD_CTRL board_ctrl;
- struct CH_CTRL ch_ctrl[MAX_CHAN];
- struct BUF_CTRL buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
+#define CYSETWAIT 0x435912
+#define CYGETWAIT 0x435913
#endif /* _UAPI_LINUX_CYCLADES_H */
diff --git a/original/uapi/linux/devlink.h b/original/uapi/linux/devlink.h
index f6008b2..b897b80 100644
--- a/original/uapi/linux/devlink.h
+++ b/original/uapi/linux/devlink.h
@@ -126,6 +126,11 @@
DEVLINK_CMD_HEALTH_REPORTER_TEST,
+ DEVLINK_CMD_RATE_GET, /* can dump */
+ DEVLINK_CMD_RATE_SET,
+ DEVLINK_CMD_RATE_NEW,
+ DEVLINK_CMD_RATE_DEL,
+
/* add new commands above here */
__DEVLINK_CMD_MAX,
DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1
@@ -206,6 +211,11 @@
*/
};
+enum devlink_rate_type {
+ DEVLINK_RATE_TYPE_LEAF,
+ DEVLINK_RATE_TYPE_NODE,
+};
+
enum devlink_param_cmode {
DEVLINK_PARAM_CMODE_RUNTIME,
DEVLINK_PARAM_CMODE_DRIVERINIT,
@@ -534,6 +544,15 @@
DEVLINK_ATTR_RELOAD_ACTION_STATS, /* nested */
DEVLINK_ATTR_PORT_PCI_SF_NUMBER, /* u32 */
+
+ DEVLINK_ATTR_RATE_TYPE, /* u16 */
+ DEVLINK_ATTR_RATE_TX_SHARE, /* u64 */
+ DEVLINK_ATTR_RATE_TX_MAX, /* u64 */
+ DEVLINK_ATTR_RATE_NODE_NAME, /* string */
+ DEVLINK_ATTR_RATE_PARENT_NODE_NAME, /* string */
+
+ DEVLINK_ATTR_REGION_MAX_SNAPSHOTS, /* u32 */
+
/* add new attributes above here, update the policy in devlink.c */
__DEVLINK_ATTR_MAX,
diff --git a/original/uapi/linux/dlm_device.h b/original/uapi/linux/dlm_device.h
index f880d28..e83954c 100644
--- a/original/uapi/linux/dlm_device.h
+++ b/original/uapi/linux/dlm_device.h
@@ -45,13 +45,13 @@
void __user *bastaddr;
struct dlm_lksb __user *lksb;
char lvb[DLM_USER_LVB_LEN];
- char name[0];
+ char name[];
};
struct dlm_lspace_params {
__u32 flags;
__u32 minor;
- char name[0];
+ char name[];
};
struct dlm_purge_params {
diff --git a/original/uapi/linux/dm-ioctl.h b/original/uapi/linux/dm-ioctl.h
index fcff666..c12ce30 100644
--- a/original/uapi/linux/dm-ioctl.h
+++ b/original/uapi/linux/dm-ioctl.h
@@ -193,8 +193,22 @@
__u32 next; /* offset to the next record from
the _start_ of this */
char name[0];
+
+ /*
+ * The following members can be accessed by taking a pointer that
+ * points immediately after the terminating zero character in "name"
+ * and aligning this pointer to next 8-byte boundary.
+ * Uuid is present if the flag DM_NAME_LIST_FLAG_HAS_UUID is set.
+ *
+ * __u32 event_nr;
+ * __u32 flags;
+ * char uuid[0];
+ */
};
+#define DM_NAME_LIST_FLAG_HAS_UUID 1
+#define DM_NAME_LIST_FLAG_DOESNT_HAVE_UUID 2
+
/*
* Used to retrieve the target versions
*/
@@ -272,9 +286,9 @@
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 44
+#define DM_VERSION_MINOR 45
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2021-02-01)"
+#define DM_VERSION_EXTRA "-ioctl (2021-03-22)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
@@ -362,4 +376,10 @@
*/
#define DM_INTERNAL_SUSPEND_FLAG (1 << 18) /* Out */
+/*
+ * If set, returns in the in buffer passed by UM, the raw table information
+ * that would be measured by IMA subsystem on device state change.
+ */
+#define DM_IMA_MEASUREMENT_FLAG (1 << 19) /* In */
+
#endif /* _LINUX_DM_IOCTL_H */
diff --git a/original/uapi/linux/dma-buf.h b/original/uapi/linux/dma-buf.h
index 7f30393..8e4a2ca 100644
--- a/original/uapi/linux/dma-buf.h
+++ b/original/uapi/linux/dma-buf.h
@@ -22,8 +22,56 @@
#include <linux/types.h>
-/* begin/end dma-buf functions used for userspace mmap. */
+/**
+ * struct dma_buf_sync - Synchronize with CPU access.
+ *
+ * When a DMA buffer is accessed from the CPU via mmap, it is not always
+ * possible to guarantee coherency between the CPU-visible map and underlying
+ * memory. To manage coherency, DMA_BUF_IOCTL_SYNC must be used to bracket
+ * any CPU access to give the kernel the chance to shuffle memory around if
+ * needed.
+ *
+ * Prior to accessing the map, the client must call DMA_BUF_IOCTL_SYNC
+ * with DMA_BUF_SYNC_START and the appropriate read/write flags. Once the
+ * access is complete, the client should call DMA_BUF_IOCTL_SYNC with
+ * DMA_BUF_SYNC_END and the same read/write flags.
+ *
+ * The synchronization provided via DMA_BUF_IOCTL_SYNC only provides cache
+ * coherency. It does not prevent other processes or devices from
+ * accessing the memory at the same time. If synchronization with a GPU or
+ * other device driver is required, it is the client's responsibility to
+ * wait for buffer to be ready for reading or writing before calling this
+ * ioctl with DMA_BUF_SYNC_START. Likewise, the client must ensure that
+ * follow-up work is not submitted to GPU or other device driver until
+ * after this ioctl has been called with DMA_BUF_SYNC_END?
+ *
+ * If the driver or API with which the client is interacting uses implicit
+ * synchronization, waiting for prior work to complete can be done via
+ * poll() on the DMA buffer file descriptor. If the driver or API requires
+ * explicit synchronization, the client may have to wait on a sync_file or
+ * other synchronization primitive outside the scope of the DMA buffer API.
+ */
struct dma_buf_sync {
+ /**
+ * @flags: Set of access flags
+ *
+ * DMA_BUF_SYNC_START:
+ * Indicates the start of a map access session.
+ *
+ * DMA_BUF_SYNC_END:
+ * Indicates the end of a map access session.
+ *
+ * DMA_BUF_SYNC_READ:
+ * Indicates that the mapped DMA buffer will be read by the
+ * client via the CPU map.
+ *
+ * DMA_BUF_SYNC_WRITE:
+ * Indicates that the mapped DMA buffer will be written by the
+ * client via the CPU map.
+ *
+ * DMA_BUF_SYNC_RW:
+ * An alias for DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE.
+ */
__u64 flags;
};
diff --git a/original/uapi/linux/dqblk_xfs.h b/original/uapi/linux/dqblk_xfs.h
index c71d909..8cda3e6 100644
--- a/original/uapi/linux/dqblk_xfs.h
+++ b/original/uapi/linux/dqblk_xfs.h
@@ -219,7 +219,10 @@
__s32 qs_rtbtimelimit;/* limit for rt blks timer */
__u16 qs_bwarnlimit; /* limit for num warnings */
__u16 qs_iwarnlimit; /* limit for num warnings */
- __u64 qs_pad2[8]; /* for future proofing */
+ __u16 qs_rtbwarnlimit;/* limit for rt blks warnings */
+ __u16 qs_pad3;
+ __u32 qs_pad4;
+ __u64 qs_pad2[7]; /* for future proofing */
};
#endif /* _LINUX_DQBLK_XFS_H */
diff --git a/original/uapi/linux/elf.h b/original/uapi/linux/elf.h
index 30f68b4..61bf477 100644
--- a/original/uapi/linux/elf.h
+++ b/original/uapi/linux/elf.h
@@ -426,6 +426,7 @@
#define NT_ARM_PACA_KEYS 0x407 /* ARM pointer authentication address keys */
#define NT_ARM_PACG_KEYS 0x408 /* ARM pointer authentication generic key */
#define NT_ARM_TAGGED_ADDR_CTRL 0x409 /* arm64 tagged address control (prctl()) */
+#define NT_ARM_PAC_ENABLED_KEYS 0x40a /* arm64 ptr auth enabled keys (prctl()) */
#define NT_ARC_V2 0x600 /* ARCv2 accumulator/extra registers */
#define NT_VMCOREDD 0x700 /* Vmcore Device Dump Note */
#define NT_MIPS_DSP 0x800 /* MIPS DSP ASE registers */
diff --git a/original/uapi/linux/ethtool.h b/original/uapi/linux/ethtool.h
index 5afea69..7bc4b8d 100644
--- a/original/uapi/linux/ethtool.h
+++ b/original/uapi/linux/ethtool.h
@@ -231,9 +231,10 @@
ETHTOOL_RX_COPYBREAK,
ETHTOOL_TX_COPYBREAK,
ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */
+ ETHTOOL_TX_COPYBREAK_BUF_SIZE,
/*
* Add your fresh new tunable attribute above and remember to update
- * tunable_strings[] in net/core/ethtool.c
+ * tunable_strings[] in net/ethtool/common.c
*/
__ETHTOOL_TUNABLE_COUNT,
};
@@ -297,7 +298,7 @@
ETHTOOL_PHY_EDPD,
/*
* Add your fresh new phy tunable attribute above and remember to update
- * phy_tunable_strings[] in net/core/ethtool.c
+ * phy_tunable_strings[] in net/ethtool/common.c
*/
__ETHTOOL_PHY_TUNABLE_COUNT,
};
@@ -603,6 +604,7 @@
ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE,
ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED,
ETHTOOL_LINK_EXT_STATE_OVERHEAT,
+ ETHTOOL_LINK_EXT_STATE_MODULE,
};
/* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */
@@ -639,6 +641,8 @@
enum ethtool_link_ext_substate_bad_signal_integrity {
ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1,
ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE,
+ ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST,
+ ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS,
};
/* More information in addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. */
@@ -647,6 +651,11 @@
ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE,
};
+/* More information in addition to ETHTOOL_LINK_EXT_STATE_MODULE. */
+enum ethtool_link_ext_substate_module {
+ ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY = 1,
+};
+
#define ETH_GSTRING_LEN 32
/**
@@ -669,6 +678,11 @@
* @ETH_SS_TS_TX_TYPES: timestamping Tx types
* @ETH_SS_TS_RX_FILTERS: timestamping Rx filters
* @ETH_SS_UDP_TUNNEL_TYPES: UDP tunnel types
+ * @ETH_SS_STATS_STD: standardized stats
+ * @ETH_SS_STATS_ETH_PHY: names of IEEE 802.3 PHY statistics
+ * @ETH_SS_STATS_ETH_MAC: names of IEEE 802.3 MAC statistics
+ * @ETH_SS_STATS_ETH_CTRL: names of IEEE 802.3 MAC Control statistics
+ * @ETH_SS_STATS_RMON: names of RMON statistics
*
* @ETH_SS_COUNT: number of defined string sets
*/
@@ -689,12 +703,40 @@
ETH_SS_TS_TX_TYPES,
ETH_SS_TS_RX_FILTERS,
ETH_SS_UDP_TUNNEL_TYPES,
+ ETH_SS_STATS_STD,
+ ETH_SS_STATS_ETH_PHY,
+ ETH_SS_STATS_ETH_MAC,
+ ETH_SS_STATS_ETH_CTRL,
+ ETH_SS_STATS_RMON,
/* add new constants above here */
ETH_SS_COUNT
};
/**
+ * enum ethtool_module_power_mode_policy - plug-in module power mode policy
+ * @ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH: Module is always in high power mode.
+ * @ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO: Module is transitioned by the host
+ * to high power mode when the first port using it is put administratively
+ * up and to low power mode when the last port using it is put
+ * administratively down.
+ */
+enum ethtool_module_power_mode_policy {
+ ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH = 1,
+ ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO,
+};
+
+/**
+ * enum ethtool_module_power_mode - plug-in module power mode
+ * @ETHTOOL_MODULE_POWER_MODE_LOW: Module is in low power mode.
+ * @ETHTOOL_MODULE_POWER_MODE_HIGH: Module is in high power mode.
+ */
+enum ethtool_module_power_mode {
+ ETHTOOL_MODULE_POWER_MODE_LOW = 1,
+ ETHTOOL_MODULE_POWER_MODE_HIGH,
+};
+
+/**
* struct ethtool_gstrings - string set for data tagging
* @cmd: Command number = %ETHTOOL_GSTRINGS
* @string_set: String set ID; one of &enum ethtool_stringset
@@ -1383,15 +1425,33 @@
};
/**
- * struct ethtool_fecparam - Ethernet forward error correction(fec) parameters
+ * struct ethtool_fecparam - Ethernet Forward Error Correction parameters
* @cmd: Command number = %ETHTOOL_GFECPARAM or %ETHTOOL_SFECPARAM
- * @active_fec: FEC mode which is active on porte
- * @fec: Bitmask of supported/configured FEC modes
- * @rsvd: Reserved for future extensions. i.e FEC bypass feature.
+ * @active_fec: FEC mode which is active on the port, single bit set, GET only.
+ * @fec: Bitmask of configured FEC modes.
+ * @reserved: Reserved for future extensions, ignore on GET, write 0 for SET.
*
- * Drivers should reject a non-zero setting of @autoneg when
- * autoneogotiation is disabled (or not supported) for the link.
+ * Note that @reserved was never validated on input and ethtool user space
+ * left it uninitialized when calling SET. Hence going forward it can only be
+ * used to return a value to userspace with GET.
*
+ * FEC modes supported by the device can be read via %ETHTOOL_GLINKSETTINGS.
+ * FEC settings are configured by link autonegotiation whenever it's enabled.
+ * With autoneg on %ETHTOOL_GFECPARAM can be used to read the current mode.
+ *
+ * When autoneg is disabled %ETHTOOL_SFECPARAM controls the FEC settings.
+ * It is recommended that drivers only accept a single bit set in @fec.
+ * When multiple bits are set in @fec drivers may pick mode in an implementation
+ * dependent way. Drivers should reject mixing %ETHTOOL_FEC_AUTO_BIT with other
+ * FEC modes, because it's unclear whether in this case other modes constrain
+ * AUTO or are independent choices.
+ * Drivers must reject SET requests if they support none of the requested modes.
+ *
+ * If device does not support FEC drivers may use %ETHTOOL_FEC_NONE instead
+ * of returning %EOPNOTSUPP from %ETHTOOL_GFECPARAM.
+ *
+ * See enum ethtool_fec_config_bits for definition of valid bits for both
+ * @fec and @active_fec.
*/
struct ethtool_fecparam {
__u32 cmd;
@@ -1403,11 +1463,16 @@
/**
* enum ethtool_fec_config_bits - flags definition of ethtool_fec_configuration
- * @ETHTOOL_FEC_NONE: FEC mode configuration is not supported
- * @ETHTOOL_FEC_AUTO: Default/Best FEC mode provided by driver
- * @ETHTOOL_FEC_OFF: No FEC Mode
- * @ETHTOOL_FEC_RS: Reed-Solomon Forward Error Detection mode
- * @ETHTOOL_FEC_BASER: Base-R/Reed-Solomon Forward Error Detection mode
+ * @ETHTOOL_FEC_NONE_BIT: FEC mode configuration is not supported. Should not
+ * be used together with other bits. GET only.
+ * @ETHTOOL_FEC_AUTO_BIT: Select default/best FEC mode automatically, usually
+ * based link mode and SFP parameters read from module's
+ * EEPROM. This bit does _not_ mean autonegotiation.
+ * @ETHTOOL_FEC_OFF_BIT: No FEC Mode
+ * @ETHTOOL_FEC_RS_BIT: Reed-Solomon FEC Mode
+ * @ETHTOOL_FEC_BASER_BIT: Base-R/Reed-Solomon FEC Mode
+ * @ETHTOOL_FEC_LLRS_BIT: Low Latency Reed Solomon FEC Mode (25G/50G Ethernet
+ * Consortium)
*/
enum ethtool_fec_config_bits {
ETHTOOL_FEC_NONE_BIT,
diff --git a/original/uapi/linux/ethtool_netlink.h b/original/uapi/linux/ethtool_netlink.h
index a286635..cca6e47 100644
--- a/original/uapi/linux/ethtool_netlink.h
+++ b/original/uapi/linux/ethtool_netlink.h
@@ -42,6 +42,13 @@
ETHTOOL_MSG_CABLE_TEST_ACT,
ETHTOOL_MSG_CABLE_TEST_TDR_ACT,
ETHTOOL_MSG_TUNNEL_INFO_GET,
+ ETHTOOL_MSG_FEC_GET,
+ ETHTOOL_MSG_FEC_SET,
+ ETHTOOL_MSG_MODULE_EEPROM_GET,
+ ETHTOOL_MSG_STATS_GET,
+ ETHTOOL_MSG_PHC_VCLOCKS_GET,
+ ETHTOOL_MSG_MODULE_GET,
+ ETHTOOL_MSG_MODULE_SET,
/* add new constants above here */
__ETHTOOL_MSG_USER_CNT,
@@ -80,6 +87,13 @@
ETHTOOL_MSG_CABLE_TEST_NTF,
ETHTOOL_MSG_CABLE_TEST_TDR_NTF,
ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY,
+ ETHTOOL_MSG_FEC_GET_REPLY,
+ ETHTOOL_MSG_FEC_NTF,
+ ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY,
+ ETHTOOL_MSG_STATS_GET_REPLY,
+ ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY,
+ ETHTOOL_MSG_MODULE_GET_REPLY,
+ ETHTOOL_MSG_MODULE_NTF,
/* add new constants above here */
__ETHTOOL_MSG_KERNEL_CNT,
@@ -315,6 +329,7 @@
ETHTOOL_A_RINGS_RX_MINI, /* u32 */
ETHTOOL_A_RINGS_RX_JUMBO, /* u32 */
ETHTOOL_A_RINGS_TX, /* u32 */
+ ETHTOOL_A_RINGS_RX_BUF_LEN, /* u32 */
/* add new constants above here */
__ETHTOOL_A_RINGS_CNT,
@@ -367,6 +382,8 @@
ETHTOOL_A_COALESCE_TX_USECS_HIGH, /* u32 */
ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH, /* u32 */
ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL, /* u32 */
+ ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, /* u8 */
+ ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, /* u8 */
/* add new constants above here */
__ETHTOOL_A_COALESCE_CNT,
@@ -395,7 +412,9 @@
ETHTOOL_A_PAUSE_STAT_TX_FRAMES,
ETHTOOL_A_PAUSE_STAT_RX_FRAMES,
- /* add new constants above here */
+ /* add new constants above here
+ * adjust ETHTOOL_PAUSE_STAT_CNT if adding non-stats!
+ */
__ETHTOOL_A_PAUSE_STAT_CNT,
ETHTOOL_A_PAUSE_STAT_MAX = (__ETHTOOL_A_PAUSE_STAT_CNT - 1)
};
@@ -432,6 +451,19 @@
ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1)
};
+/* PHC VCLOCKS */
+
+enum {
+ ETHTOOL_A_PHC_VCLOCKS_UNSPEC,
+ ETHTOOL_A_PHC_VCLOCKS_HEADER, /* nest - _A_HEADER_* */
+ ETHTOOL_A_PHC_VCLOCKS_NUM, /* u32 */
+ ETHTOOL_A_PHC_VCLOCKS_INDEX, /* array, s32 */
+
+ /* add new constants above here */
+ __ETHTOOL_A_PHC_VCLOCKS_CNT,
+ ETHTOOL_A_PHC_VCLOCKS_MAX = (__ETHTOOL_A_PHC_VCLOCKS_CNT - 1)
+};
+
/* CABLE TEST */
enum {
@@ -629,6 +661,198 @@
ETHTOOL_A_TUNNEL_INFO_MAX = (__ETHTOOL_A_TUNNEL_INFO_CNT - 1)
};
+/* FEC */
+
+enum {
+ ETHTOOL_A_FEC_UNSPEC,
+ ETHTOOL_A_FEC_HEADER, /* nest - _A_HEADER_* */
+ ETHTOOL_A_FEC_MODES, /* bitset */
+ ETHTOOL_A_FEC_AUTO, /* u8 */
+ ETHTOOL_A_FEC_ACTIVE, /* u32 */
+ ETHTOOL_A_FEC_STATS, /* nest - _A_FEC_STAT */
+
+ __ETHTOOL_A_FEC_CNT,
+ ETHTOOL_A_FEC_MAX = (__ETHTOOL_A_FEC_CNT - 1)
+};
+
+enum {
+ ETHTOOL_A_FEC_STAT_UNSPEC,
+ ETHTOOL_A_FEC_STAT_PAD,
+
+ ETHTOOL_A_FEC_STAT_CORRECTED, /* array, u64 */
+ ETHTOOL_A_FEC_STAT_UNCORR, /* array, u64 */
+ ETHTOOL_A_FEC_STAT_CORR_BITS, /* array, u64 */
+
+ /* add new constants above here */
+ __ETHTOOL_A_FEC_STAT_CNT,
+ ETHTOOL_A_FEC_STAT_MAX = (__ETHTOOL_A_FEC_STAT_CNT - 1)
+};
+
+/* MODULE EEPROM */
+
+enum {
+ ETHTOOL_A_MODULE_EEPROM_UNSPEC,
+ ETHTOOL_A_MODULE_EEPROM_HEADER, /* nest - _A_HEADER_* */
+
+ ETHTOOL_A_MODULE_EEPROM_OFFSET, /* u32 */
+ ETHTOOL_A_MODULE_EEPROM_LENGTH, /* u32 */
+ ETHTOOL_A_MODULE_EEPROM_PAGE, /* u8 */
+ ETHTOOL_A_MODULE_EEPROM_BANK, /* u8 */
+ ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS, /* u8 */
+ ETHTOOL_A_MODULE_EEPROM_DATA, /* binary */
+
+ __ETHTOOL_A_MODULE_EEPROM_CNT,
+ ETHTOOL_A_MODULE_EEPROM_MAX = (__ETHTOOL_A_MODULE_EEPROM_CNT - 1)
+};
+
+/* STATS */
+
+enum {
+ ETHTOOL_A_STATS_UNSPEC,
+ ETHTOOL_A_STATS_PAD,
+ ETHTOOL_A_STATS_HEADER, /* nest - _A_HEADER_* */
+ ETHTOOL_A_STATS_GROUPS, /* bitset */
+
+ ETHTOOL_A_STATS_GRP, /* nest - _A_STATS_GRP_* */
+
+ /* add new constants above here */
+ __ETHTOOL_A_STATS_CNT,
+ ETHTOOL_A_STATS_MAX = (__ETHTOOL_A_STATS_CNT - 1)
+};
+
+enum {
+ ETHTOOL_STATS_ETH_PHY,
+ ETHTOOL_STATS_ETH_MAC,
+ ETHTOOL_STATS_ETH_CTRL,
+ ETHTOOL_STATS_RMON,
+
+ /* add new constants above here */
+ __ETHTOOL_STATS_CNT
+};
+
+enum {
+ ETHTOOL_A_STATS_GRP_UNSPEC,
+ ETHTOOL_A_STATS_GRP_PAD,
+
+ ETHTOOL_A_STATS_GRP_ID, /* u32 */
+ ETHTOOL_A_STATS_GRP_SS_ID, /* u32 */
+
+ ETHTOOL_A_STATS_GRP_STAT, /* nest */
+
+ ETHTOOL_A_STATS_GRP_HIST_RX, /* nest */
+ ETHTOOL_A_STATS_GRP_HIST_TX, /* nest */
+
+ ETHTOOL_A_STATS_GRP_HIST_BKT_LOW, /* u32 */
+ ETHTOOL_A_STATS_GRP_HIST_BKT_HI, /* u32 */
+ ETHTOOL_A_STATS_GRP_HIST_VAL, /* u64 */
+
+ /* add new constants above here */
+ __ETHTOOL_A_STATS_GRP_CNT,
+ ETHTOOL_A_STATS_GRP_MAX = (__ETHTOOL_A_STATS_CNT - 1)
+};
+
+enum {
+ /* 30.3.2.1.5 aSymbolErrorDuringCarrier */
+ ETHTOOL_A_STATS_ETH_PHY_5_SYM_ERR,
+
+ /* add new constants above here */
+ __ETHTOOL_A_STATS_ETH_PHY_CNT,
+ ETHTOOL_A_STATS_ETH_PHY_MAX = (__ETHTOOL_A_STATS_ETH_PHY_CNT - 1)
+};
+
+enum {
+ /* 30.3.1.1.2 aFramesTransmittedOK */
+ ETHTOOL_A_STATS_ETH_MAC_2_TX_PKT,
+ /* 30.3.1.1.3 aSingleCollisionFrames */
+ ETHTOOL_A_STATS_ETH_MAC_3_SINGLE_COL,
+ /* 30.3.1.1.4 aMultipleCollisionFrames */
+ ETHTOOL_A_STATS_ETH_MAC_4_MULTI_COL,
+ /* 30.3.1.1.5 aFramesReceivedOK */
+ ETHTOOL_A_STATS_ETH_MAC_5_RX_PKT,
+ /* 30.3.1.1.6 aFrameCheckSequenceErrors */
+ ETHTOOL_A_STATS_ETH_MAC_6_FCS_ERR,
+ /* 30.3.1.1.7 aAlignmentErrors */
+ ETHTOOL_A_STATS_ETH_MAC_7_ALIGN_ERR,
+ /* 30.3.1.1.8 aOctetsTransmittedOK */
+ ETHTOOL_A_STATS_ETH_MAC_8_TX_BYTES,
+ /* 30.3.1.1.9 aFramesWithDeferredXmissions */
+ ETHTOOL_A_STATS_ETH_MAC_9_TX_DEFER,
+ /* 30.3.1.1.10 aLateCollisions */
+ ETHTOOL_A_STATS_ETH_MAC_10_LATE_COL,
+ /* 30.3.1.1.11 aFramesAbortedDueToXSColls */
+ ETHTOOL_A_STATS_ETH_MAC_11_XS_COL,
+ /* 30.3.1.1.12 aFramesLostDueToIntMACXmitError */
+ ETHTOOL_A_STATS_ETH_MAC_12_TX_INT_ERR,
+ /* 30.3.1.1.13 aCarrierSenseErrors */
+ ETHTOOL_A_STATS_ETH_MAC_13_CS_ERR,
+ /* 30.3.1.1.14 aOctetsReceivedOK */
+ ETHTOOL_A_STATS_ETH_MAC_14_RX_BYTES,
+ /* 30.3.1.1.15 aFramesLostDueToIntMACRcvError */
+ ETHTOOL_A_STATS_ETH_MAC_15_RX_INT_ERR,
+
+ /* 30.3.1.1.18 aMulticastFramesXmittedOK */
+ ETHTOOL_A_STATS_ETH_MAC_18_TX_MCAST,
+ /* 30.3.1.1.19 aBroadcastFramesXmittedOK */
+ ETHTOOL_A_STATS_ETH_MAC_19_TX_BCAST,
+ /* 30.3.1.1.20 aFramesWithExcessiveDeferral */
+ ETHTOOL_A_STATS_ETH_MAC_20_XS_DEFER,
+ /* 30.3.1.1.21 aMulticastFramesReceivedOK */
+ ETHTOOL_A_STATS_ETH_MAC_21_RX_MCAST,
+ /* 30.3.1.1.22 aBroadcastFramesReceivedOK */
+ ETHTOOL_A_STATS_ETH_MAC_22_RX_BCAST,
+ /* 30.3.1.1.23 aInRangeLengthErrors */
+ ETHTOOL_A_STATS_ETH_MAC_23_IR_LEN_ERR,
+ /* 30.3.1.1.24 aOutOfRangeLengthField */
+ ETHTOOL_A_STATS_ETH_MAC_24_OOR_LEN,
+ /* 30.3.1.1.25 aFrameTooLongErrors */
+ ETHTOOL_A_STATS_ETH_MAC_25_TOO_LONG_ERR,
+
+ /* add new constants above here */
+ __ETHTOOL_A_STATS_ETH_MAC_CNT,
+ ETHTOOL_A_STATS_ETH_MAC_MAX = (__ETHTOOL_A_STATS_ETH_MAC_CNT - 1)
+};
+
+enum {
+ /* 30.3.3.3 aMACControlFramesTransmitted */
+ ETHTOOL_A_STATS_ETH_CTRL_3_TX,
+ /* 30.3.3.4 aMACControlFramesReceived */
+ ETHTOOL_A_STATS_ETH_CTRL_4_RX,
+ /* 30.3.3.5 aUnsupportedOpcodesReceived */
+ ETHTOOL_A_STATS_ETH_CTRL_5_RX_UNSUP,
+
+ /* add new constants above here */
+ __ETHTOOL_A_STATS_ETH_CTRL_CNT,
+ ETHTOOL_A_STATS_ETH_CTRL_MAX = (__ETHTOOL_A_STATS_ETH_CTRL_CNT - 1)
+};
+
+enum {
+ /* etherStatsUndersizePkts */
+ ETHTOOL_A_STATS_RMON_UNDERSIZE,
+ /* etherStatsOversizePkts */
+ ETHTOOL_A_STATS_RMON_OVERSIZE,
+ /* etherStatsFragments */
+ ETHTOOL_A_STATS_RMON_FRAG,
+ /* etherStatsJabbers */
+ ETHTOOL_A_STATS_RMON_JABBER,
+
+ /* add new constants above here */
+ __ETHTOOL_A_STATS_RMON_CNT,
+ ETHTOOL_A_STATS_RMON_MAX = (__ETHTOOL_A_STATS_RMON_CNT - 1)
+};
+
+/* MODULE */
+
+enum {
+ ETHTOOL_A_MODULE_UNSPEC,
+ ETHTOOL_A_MODULE_HEADER, /* nest - _A_HEADER_* */
+ ETHTOOL_A_MODULE_POWER_MODE_POLICY, /* u8 */
+ ETHTOOL_A_MODULE_POWER_MODE, /* u8 */
+
+ /* add new constants above here */
+ __ETHTOOL_A_MODULE_CNT,
+ ETHTOOL_A_MODULE_MAX = (__ETHTOOL_A_MODULE_CNT - 1)
+};
+
/* generic netlink info */
#define ETHTOOL_GENL_NAME "ethtool"
#define ETHTOOL_GENL_VERSION 1
diff --git a/original/uapi/linux/fanotify.h b/original/uapi/linux/fanotify.h
index fbf9c5c..e8ac38c 100644
--- a/original/uapi/linux/fanotify.h
+++ b/original/uapi/linux/fanotify.h
@@ -20,6 +20,7 @@
#define FAN_OPEN_EXEC 0x00001000 /* File was opened for exec */
#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */
+#define FAN_FS_ERROR 0x00008000 /* Filesystem error */
#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */
#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */
@@ -27,6 +28,8 @@
#define FAN_EVENT_ON_CHILD 0x08000000 /* Interested in child events */
+#define FAN_RENAME 0x10000000 /* File was renamed */
+
#define FAN_ONDIR 0x40000000 /* Event occurred against dir */
/* helper events */
@@ -51,13 +54,18 @@
#define FAN_ENABLE_AUDIT 0x00000040
/* Flags to determine fanotify event format */
+#define FAN_REPORT_PIDFD 0x00000080 /* Report pidfd for event->pid */
#define FAN_REPORT_TID 0x00000100 /* event->pid is thread id */
#define FAN_REPORT_FID 0x00000200 /* Report unique file id */
#define FAN_REPORT_DIR_FID 0x00000400 /* Report unique directory id */
#define FAN_REPORT_NAME 0x00000800 /* Report events with name */
+#define FAN_REPORT_TARGET_FID 0x00001000 /* Report dirent target id */
/* Convenience macro - FAN_REPORT_NAME requires FAN_REPORT_DIR_FID */
#define FAN_REPORT_DFID_NAME (FAN_REPORT_DIR_FID | FAN_REPORT_NAME)
+/* Convenience macro - FAN_REPORT_TARGET_FID requires all other FID flags */
+#define FAN_REPORT_DFID_NAME_TARGET (FAN_REPORT_DFID_NAME | \
+ FAN_REPORT_FID | FAN_REPORT_TARGET_FID)
/* Deprecated - do not use this in programs and do not add new flags here! */
#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \
@@ -123,6 +131,14 @@
#define FAN_EVENT_INFO_TYPE_FID 1
#define FAN_EVENT_INFO_TYPE_DFID_NAME 2
#define FAN_EVENT_INFO_TYPE_DFID 3
+#define FAN_EVENT_INFO_TYPE_PIDFD 4
+#define FAN_EVENT_INFO_TYPE_ERROR 5
+
+/* Special info types for FAN_RENAME */
+#define FAN_EVENT_INFO_TYPE_OLD_DFID_NAME 10
+/* Reserved for FAN_EVENT_INFO_TYPE_OLD_DFID 11 */
+#define FAN_EVENT_INFO_TYPE_NEW_DFID_NAME 12
+/* Reserved for FAN_EVENT_INFO_TYPE_NEW_DFID 13 */
/* Variable length info record following event metadata */
struct fanotify_event_info_header {
@@ -148,6 +164,21 @@
unsigned char handle[0];
};
+/*
+ * This structure is used for info records of type FAN_EVENT_INFO_TYPE_PIDFD.
+ * It holds a pidfd for the pid that was responsible for generating an event.
+ */
+struct fanotify_event_info_pidfd {
+ struct fanotify_event_info_header hdr;
+ __s32 pidfd;
+};
+
+struct fanotify_event_info_error {
+ struct fanotify_event_info_header hdr;
+ __s32 error;
+ __u32 error_count;
+};
+
struct fanotify_response {
__s32 fd;
__u32 response;
@@ -160,6 +191,8 @@
/* No fd set in event */
#define FAN_NOFD -1
+#define FAN_NOPIDFD FAN_NOFD
+#define FAN_EPIDFD -2
/* Helper functions to deal with fanotify_event_metadata buffers */
#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
diff --git a/original/uapi/linux/fd.h b/original/uapi/linux/fd.h
index 8b80c63..7022e34 100644
--- a/original/uapi/linux/fd.h
+++ b/original/uapi/linux/fd.h
@@ -49,11 +49,11 @@
#define FDCLRPRM _IO(2, 0x41)
/* clear user-defined parameters */
-#define FDSETPRM _IOW(2, 0x42, struct floppy_struct)
+#define FDSETPRM _IOW(2, 0x42, struct floppy_struct)
#define FDSETMEDIAPRM FDSETPRM
/* set user-defined parameters for current media */
-#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)
+#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct)
#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
#define FDDEFMEDIAPRM FDDEFPRM
#define FDGETMEDIAPRM FDGETPRM
@@ -65,7 +65,7 @@
/* issue/don't issue kernel messages on media type change */
-/*
+/*
* Formatting (obsolete)
*/
#define FD_FILL_BYTE 0xF6 /* format fill byte. */
@@ -126,13 +126,13 @@
*/
struct floppy_drive_params {
signed char cmos; /* CMOS type */
-
- /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms
+
+ /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms
* etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
*/
unsigned long max_dtr; /* Step rate, usec */
unsigned long hlt; /* Head load/settle time, msec */
- unsigned long hut; /* Head unload time (remnant of
+ unsigned long hut; /* Head unload time (remnant of
* 8" drives) */
unsigned long srt; /* Step rate, usec */
@@ -145,12 +145,12 @@
unsigned char rps; /* rotations per second */
unsigned char tracks; /* maximum number of tracks */
unsigned long timeout; /* timeout for interrupt requests */
-
- unsigned char interleave_sect; /* if there are more sectors, use
+
+ unsigned char interleave_sect; /* if there are more sectors, use
* interleave */
-
+
struct floppy_max_errors max_errors;
-
+
char flags; /* various flags, including ftd_msg */
/*
* Announce successful media type detection and media information loss after
@@ -162,7 +162,7 @@
#define FD_BROKEN_DCL 0x20
#define FD_DEBUG 0x02
#define FD_SILENT_DCL_CLEAR 0x4
-#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware
+#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware
considerations */
char read_track; /* use readtrack during probing? */
@@ -176,8 +176,8 @@
#define FD_AUTODETECT_SIZE 8
short autodetect[FD_AUTODETECT_SIZE]; /* autodetected formats */
-
- int checkfreq; /* how often should the drive be checked for disk
+
+ int checkfreq; /* how often should the drive be checked for disk
* changes */
int native_format; /* native format of this drive */
};
@@ -225,13 +225,13 @@
* decremented after each probe.
*/
int keep_data;
-
+
/* Prevent "aliased" accesses. */
int fd_ref;
int fd_device;
- unsigned long last_checked; /* when was the drive last checked for a disk
+ unsigned long last_checked; /* when was the drive last checked for a disk
* change? */
-
+
char *dmabuf;
int bufblocks;
};
@@ -255,7 +255,7 @@
/*
* FDC state
*/
-struct floppy_fdc_state {
+struct floppy_fdc_state {
int spec1; /* spec1 value last used */
int spec2; /* spec2 value last used */
int dtr;
@@ -302,16 +302,16 @@
* to the user process are not counted.
*/
- unsigned int write_errors; /* number of physical write errors
+ unsigned int write_errors; /* number of physical write errors
* encountered */
-
+
/* position of first and last write errors */
unsigned long first_error_sector;
int first_error_generation;
unsigned long last_error_sector;
int last_error_generation;
-
- unsigned int badness; /* highest retry count for a read or write
+
+ unsigned int badness; /* highest retry count for a read or write
* operation */
};
@@ -335,7 +335,7 @@
#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
#define FD_RAW_INTR 8 /* wait for an interrupt */
#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
-#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command
+#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command
* completion */
#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */
#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */
@@ -353,7 +353,7 @@
void __user *data;
char *kernel_data; /* location of data buffer in the kernel */
- struct floppy_raw_cmd *next; /* used for chaining of raw cmd's
+ struct floppy_raw_cmd *next; /* used for chaining of raw cmd's
* within the kernel */
long length; /* in: length of dma transfer. out: remaining bytes */
long phys_length; /* physical length, if different from dma length */
diff --git a/original/uapi/linux/fs.h b/original/uapi/linux/fs.h
index f44eb0a..bdf7b40 100644
--- a/original/uapi/linux/fs.h
+++ b/original/uapi/linux/fs.h
@@ -184,8 +184,9 @@
#define BLKSECDISCARD _IO(0x12,125)
#define BLKROTATIONAL _IO(0x12,126)
#define BLKZEROOUT _IO(0x12,127)
+#define BLKGETDISKSEQ _IOR(0x12,128,__u64)
/*
- * A jump here: 130-131 are reserved for zoned block devices
+ * A jump here: 130-136 are reserved for zoned block devices
* (see uapi/linux/blkzoned.h)
*/
diff --git a/original/uapi/linux/fuse.h b/original/uapi/linux/fuse.h
index 8fa26a2..69a9d97 100644
--- a/original/uapi/linux/fuse.h
+++ b/original/uapi/linux/fuse.h
@@ -179,6 +179,21 @@
* 7.33
* - add FUSE_HANDLE_KILLPRIV_V2, FUSE_WRITE_KILL_SUIDGID, FATTR_KILL_SUIDGID
* - add FUSE_OPEN_KILL_SUIDGID
+ * - extend fuse_setxattr_in, add FUSE_SETXATTR_EXT
+ * - add FUSE_SETXATTR_ACL_KILL_SGID
+ *
+ * 7.34
+ * - add FUSE_SYNCFS
+ *
+ * 7.35
+ * - add FOPEN_NOFLUSH
+ *
+ * 7.36
+ * - extend fuse_init_in with reserved fields, add FUSE_INIT_EXT init flag
+ * - add flags2 to fuse_init_in and fuse_init_out
+ * - add FUSE_SECURITY_CTX init flag
+ * - add security context to create, mkdir, symlink, and mknod requests
+ * - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX
*/
#ifndef _LINUX_FUSE_H
@@ -214,7 +229,7 @@
#define FUSE_KERNEL_VERSION 7
/** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 33
+#define FUSE_KERNEL_MINOR_VERSION 36
/** The node ID of the root inode */
#define FUSE_ROOT_ID 1
@@ -285,12 +300,14 @@
* FOPEN_NONSEEKABLE: the file is not seekable
* FOPEN_CACHE_DIR: allow caching this directory
* FOPEN_STREAM: the file is stream-like (no file position at all)
+ * FOPEN_NOFLUSH: don't flush data cache on close (unless FUSE_WRITEBACK_CACHE)
*/
#define FOPEN_DIRECT_IO (1 << 0)
#define FOPEN_KEEP_CACHE (1 << 1)
#define FOPEN_NONSEEKABLE (1 << 2)
#define FOPEN_CACHE_DIR (1 << 3)
#define FOPEN_STREAM (1 << 4)
+#define FOPEN_NOFLUSH (1 << 5)
/**
* INIT request/reply flags
@@ -330,6 +347,12 @@
* does not have CAP_FSETID. Additionally upon
* write/truncate sgid is killed only if file has group
* execute permission. (Same as Linux VFS behavior).
+ * FUSE_SETXATTR_EXT: Server supports extended struct fuse_setxattr_in
+ * FUSE_INIT_EXT: extended fuse_init_in request
+ * FUSE_INIT_RESERVED: reserved, do not use
+ * FUSE_SECURITY_CTX: add security context to create, mkdir, symlink, and
+ * mknod
+ * FUSE_HAS_INODE_DAX: use per inode DAX
*/
#define FUSE_ASYNC_READ (1 << 0)
#define FUSE_POSIX_LOCKS (1 << 1)
@@ -360,7 +383,24 @@
#define FUSE_MAP_ALIGNMENT (1 << 26)
#define FUSE_SUBMOUNTS (1 << 27)
#define FUSE_HANDLE_KILLPRIV_V2 (1 << 28)
-#define FUSE_PASSTHROUGH (1 << 31)
+#define FUSE_SETXATTR_EXT (1 << 29)
+#define FUSE_INIT_EXT (1 << 30)
+#define FUSE_INIT_RESERVED (1 << 31)
+/* bits 32..63 get shifted down 32 bits into the flags2 field */
+#define FUSE_SECURITY_CTX (1ULL << 32)
+#define FUSE_HAS_INODE_DAX (1ULL << 33)
+
+/*
+ * For FUSE < 7.36 FUSE_PASSTHROUGH has value (1 << 31).
+ * This condition check is not really required, but would prevent having a
+ * broken commit in the tree.
+ */
+#if FUSE_KERNEL_VERSION > 7 || \
+ (FUSE_KERNEL_VERSION == 7 && FUSE_KERNEL_MINOR_VERSION >= 36)
+#define FUSE_PASSTHROUGH (1ULL << 63)
+#else
+#define FUSE_PASSTHROUGH (1 << 31)
+#endif
/**
* CUSE INIT request/reply flags
@@ -443,8 +483,10 @@
* fuse_attr flags
*
* FUSE_ATTR_SUBMOUNT: Object is a submount root
+ * FUSE_ATTR_DAX: Enable DAX for this file in per inode DAX mode
*/
#define FUSE_ATTR_SUBMOUNT (1 << 0)
+#define FUSE_ATTR_DAX (1 << 1)
/**
* Open flags
@@ -452,6 +494,12 @@
*/
#define FUSE_OPEN_KILL_SUIDGID (1 << 0)
+/**
+ * setxattr flags
+ * FUSE_SETXATTR_ACL_KILL_SGID: Clear SGID when system.posix_acl_access is set
+ */
+#define FUSE_SETXATTR_ACL_KILL_SGID (1 << 0)
+
enum fuse_opcode {
FUSE_LOOKUP = 1,
FUSE_FORGET = 2, /* no reply */
@@ -500,6 +548,7 @@
FUSE_COPY_FILE_RANGE = 47,
FUSE_SETUPMAPPING = 48,
FUSE_REMOVEMAPPING = 49,
+ FUSE_SYNCFS = 50,
FUSE_CANONICAL_PATH = 2016,
/* CUSE specific operations */
@@ -683,9 +732,13 @@
uint32_t padding;
};
+#define FUSE_COMPAT_SETXATTR_IN_SIZE 8
+
struct fuse_setxattr_in {
uint32_t size;
uint32_t flags;
+ uint32_t setxattr_flags;
+ uint32_t padding;
};
struct fuse_getxattr_in {
@@ -720,6 +773,8 @@
uint32_t minor;
uint32_t max_readahead;
uint32_t flags;
+ uint32_t flags2;
+ uint32_t unused[11];
};
#define FUSE_COMPAT_INIT_OUT_SIZE 8
@@ -736,7 +791,8 @@
uint32_t time_gran;
uint16_t max_pages;
uint16_t map_alignment;
- uint32_t unused[8];
+ uint32_t flags2;
+ uint32_t unused[7];
};
#define CUSE_INIT_INFO_MAX 4096
@@ -830,14 +886,6 @@
uint32_t padding;
};
-/* fuse_passthrough_out for passthrough V1 */
-struct fuse_passthrough_out {
- uint32_t fd;
- /* For future implementation */
- uint32_t len;
- void *vec;
-};
-
struct fuse_out_header {
uint32_t len;
int32_t error;
@@ -852,9 +900,12 @@
char name[];
};
-#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
-#define FUSE_DIRENT_ALIGN(x) \
+/* Align variable length records to 64bit boundary */
+#define FUSE_REC_ALIGN(x) \
(((x) + sizeof(uint64_t) - 1) & ~(sizeof(uint64_t) - 1))
+
+#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
+#define FUSE_DIRENT_ALIGN(x) FUSE_REC_ALIGN(x)
#define FUSE_DIRENT_SIZE(d) \
FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
@@ -915,8 +966,9 @@
/* Device ioctls: */
#define FUSE_DEV_IOC_MAGIC 229
#define FUSE_DEV_IOC_CLONE _IOR(FUSE_DEV_IOC_MAGIC, 0, uint32_t)
-/* 127 is reserved for the V1 interface implementation in Android */
-#define FUSE_DEV_IOC_PASSTHROUGH_OPEN _IOW(FUSE_DEV_IOC_MAGIC, 127, struct fuse_passthrough_out)
+/* 127 is reserved for the V1 interface implementation in Android (deprecated) */
+/* 126 is reserved for the V2 interface implementation in Android */
+#define FUSE_DEV_IOC_PASSTHROUGH_OPEN _IOW(FUSE_DEV_IOC_MAGIC, 126, uint32_t)
struct fuse_lseek_in {
uint64_t fh;
@@ -969,4 +1021,30 @@
#define FUSE_REMOVEMAPPING_MAX_ENTRY \
(PAGE_SIZE / sizeof(struct fuse_removemapping_one))
+struct fuse_syncfs_in {
+ uint64_t padding;
+};
+
+/*
+ * For each security context, send fuse_secctx with size of security context
+ * fuse_secctx will be followed by security context name and this in turn
+ * will be followed by actual context label.
+ * fuse_secctx, name, context
+ */
+struct fuse_secctx {
+ uint32_t size;
+ uint32_t padding;
+};
+
+/*
+ * Contains the information about how many fuse_secctx structures are being
+ * sent and what's the total size of all security contexts (including
+ * size of fuse_secctx_header).
+ *
+ */
+struct fuse_secctx_header {
+ uint32_t size;
+ uint32_t nr_secctx;
+};
+
#endif /* _LINUX_FUSE_H */
diff --git a/original/uapi/linux/futex.h b/original/uapi/linux/futex.h
index a89eb0a..71a5df8 100644
--- a/original/uapi/linux/futex.h
+++ b/original/uapi/linux/futex.h
@@ -21,6 +21,7 @@
#define FUTEX_WAKE_BITSET 10
#define FUTEX_WAIT_REQUEUE_PI 11
#define FUTEX_CMP_REQUEUE_PI 12
+#define FUTEX_LOCK_PI2 13
#define FUTEX_PRIVATE_FLAG 128
#define FUTEX_CLOCK_REALTIME 256
@@ -32,6 +33,7 @@
#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_LOCK_PI2_PRIVATE (FUTEX_LOCK_PI2 | FUTEX_PRIVATE_FLAG)
#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
@@ -42,6 +44,31 @@
FUTEX_PRIVATE_FLAG)
/*
+ * Flags to specify the bit length of the futex word for futex2 syscalls.
+ * Currently, only 32 is supported.
+ */
+#define FUTEX_32 2
+
+/*
+ * Max numbers of elements in a futex_waitv array
+ */
+#define FUTEX_WAITV_MAX 128
+
+/**
+ * struct futex_waitv - A waiter for vectorized wait
+ * @val: Expected value at uaddr
+ * @uaddr: User address to wait on
+ * @flags: Flags for this waiter
+ * @__reserved: Reserved member to preserve data alignment. Should be 0.
+ */
+struct futex_waitv {
+ __u64 val;
+ __u64 uaddr;
+ __u32 flags;
+ __u32 __reserved;
+};
+
+/*
* Support for robust futexes: the kernel cleans up held futexes at
* thread exit time.
*/
diff --git a/original/uapi/linux/hyperv.h b/original/uapi/linux/hyperv.h
index 6135d92..daf82a2 100644
--- a/original/uapi/linux/hyperv.h
+++ b/original/uapi/linux/hyperv.h
@@ -26,7 +26,7 @@
#ifndef _UAPI_HYPERV_H
#define _UAPI_HYPERV_H
-#include <linux/uuid.h>
+#include <linux/types.h>
/*
* Framework version for util services.
diff --git a/original/uapi/linux/icmp.h b/original/uapi/linux/icmp.h
index fb169a5..163c099 100644
--- a/original/uapi/linux/icmp.h
+++ b/original/uapi/linux/icmp.h
@@ -20,6 +20,8 @@
#include <linux/types.h>
#include <asm/byteorder.h>
+#include <linux/if.h>
+#include <linux/in6.h>
#define ICMP_ECHOREPLY 0 /* Echo Reply */
#define ICMP_DEST_UNREACH 3 /* Destination Unreachable */
@@ -66,6 +68,23 @@
#define ICMP_EXC_TTL 0 /* TTL count exceeded */
#define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */
+/* Codes for EXT_ECHO (PROBE) */
+#define ICMP_EXT_ECHO 42
+#define ICMP_EXT_ECHOREPLY 43
+#define ICMP_EXT_CODE_MAL_QUERY 1 /* Malformed Query */
+#define ICMP_EXT_CODE_NO_IF 2 /* No such Interface */
+#define ICMP_EXT_CODE_NO_TABLE_ENT 3 /* No such Table Entry */
+#define ICMP_EXT_CODE_MULT_IFS 4 /* Multiple Interfaces Satisfy Query */
+
+/* Constants for EXT_ECHO (PROBE) */
+#define ICMP_EXT_ECHOREPLY_ACTIVE (1 << 2)/* active bit in reply message */
+#define ICMP_EXT_ECHOREPLY_IPV4 (1 << 1)/* ipv4 bit in reply message */
+#define ICMP_EXT_ECHOREPLY_IPV6 1 /* ipv6 bit in reply message */
+#define ICMP_EXT_ECHO_CTYPE_NAME 1
+#define ICMP_EXT_ECHO_CTYPE_INDEX 2
+#define ICMP_EXT_ECHO_CTYPE_ADDR 3
+#define ICMP_AFI_IP 1 /* Address Family Identifier for ipv4 */
+#define ICMP_AFI_IP6 2 /* Address Family Identifier for ipv6 */
struct icmphdr {
__u8 type;
@@ -118,4 +137,26 @@
__u8 class_type;
};
+/* RFC 8335: 2.1 Header for c-type 3 payload */
+struct icmp_ext_echo_ctype3_hdr {
+ __be16 afi;
+ __u8 addrlen;
+ __u8 reserved;
+};
+
+/* RFC 8335: 2.1 Interface Identification Object */
+struct icmp_ext_echo_iio {
+ struct icmp_extobj_hdr extobj_hdr;
+ union {
+ char name[IFNAMSIZ];
+ __be32 ifindex;
+ struct {
+ struct icmp_ext_echo_ctype3_hdr ctype3_hdr;
+ union {
+ __be32 ipv4_addr;
+ struct in6_addr ipv6_addr;
+ } ip_addr;
+ } addr;
+ } ident;
+};
#endif /* _UAPI_LINUX_ICMP_H */
diff --git a/original/uapi/linux/icmpv6.h b/original/uapi/linux/icmpv6.h
index 0564fd7..ecaece3 100644
--- a/original/uapi/linux/icmpv6.h
+++ b/original/uapi/linux/icmpv6.h
@@ -140,6 +140,9 @@
#define ICMPV6_UNK_OPTION 2
#define ICMPV6_HDR_INCOMP 3
+/* Codes for EXT_ECHO (PROBE) */
+#define ICMPV6_EXT_ECHO_REQUEST 160
+#define ICMPV6_EXT_ECHO_REPLY 161
/*
* constants for (set|get)sockopt
*/
diff --git a/original/uapi/linux/idxd.h b/original/uapi/linux/idxd.h
index e33997b..a8f0ff7 100644
--- a/original/uapi/linux/idxd.h
+++ b/original/uapi/linux/idxd.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* SPDX-License-Identifier: LGPL-2.1 WITH Linux-syscall-note */
/* Copyright(c) 2019 Intel Corporation. All rights rsvd. */
#ifndef _USR_IDXD_H_
#define _USR_IDXD_H_
@@ -9,6 +9,31 @@
#include <stdint.h>
#endif
+/* Driver command error status */
+enum idxd_scmd_stat {
+ IDXD_SCMD_DEV_ENABLED = 0x80000010,
+ IDXD_SCMD_DEV_NOT_ENABLED = 0x80000020,
+ IDXD_SCMD_WQ_ENABLED = 0x80000021,
+ IDXD_SCMD_DEV_DMA_ERR = 0x80020000,
+ IDXD_SCMD_WQ_NO_GRP = 0x80030000,
+ IDXD_SCMD_WQ_NO_NAME = 0x80040000,
+ IDXD_SCMD_WQ_NO_SVM = 0x80050000,
+ IDXD_SCMD_WQ_NO_THRESH = 0x80060000,
+ IDXD_SCMD_WQ_PORTAL_ERR = 0x80070000,
+ IDXD_SCMD_WQ_RES_ALLOC_ERR = 0x80080000,
+ IDXD_SCMD_PERCPU_ERR = 0x80090000,
+ IDXD_SCMD_DMA_CHAN_ERR = 0x800a0000,
+ IDXD_SCMD_CDEV_ERR = 0x800b0000,
+ IDXD_SCMD_WQ_NO_SWQ_SUPPORT = 0x800c0000,
+ IDXD_SCMD_WQ_NONE_CONFIGURED = 0x800d0000,
+ IDXD_SCMD_WQ_NO_SIZE = 0x800e0000,
+ IDXD_SCMD_WQ_NO_PRIV = 0x800f0000,
+ IDXD_SCMD_WQ_IRQ_ERR = 0x80100000,
+};
+
+#define IDXD_SCMD_SOFTERR_MASK 0x80000000
+#define IDXD_SCMD_SOFTERR_SHIFT 16
+
/* Descriptor flags */
#define IDXD_OP_FLAG_FENCE 0x0001
#define IDXD_OP_FLAG_BOF 0x0002
diff --git a/original/uapi/linux/if_arp.h b/original/uapi/linux/if_arp.h
index c3cc5a9..4783af9 100644
--- a/original/uapi/linux/if_arp.h
+++ b/original/uapi/linux/if_arp.h
@@ -54,6 +54,7 @@
#define ARPHRD_X25 271 /* CCITT X.25 */
#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */
#define ARPHRD_CAN 280 /* Controller Area Network */
+#define ARPHRD_MCTP 290
#define ARPHRD_PPP 512
#define ARPHRD_CISCO 513 /* Cisco HDLC */
#define ARPHRD_HDLC ARPHRD_CISCO
diff --git a/original/uapi/linux/if_bonding.h b/original/uapi/linux/if_bonding.h
index e8eb4ad..d174914 100644
--- a/original/uapi/linux/if_bonding.h
+++ b/original/uapi/linux/if_bonding.h
@@ -153,14 +153,3 @@
#define BOND_3AD_STAT_MAX (__BOND_3AD_STAT_MAX - 1)
#endif /* _LINUX_IF_BONDING_H */
-
-/*
- * Local variables:
- * version-control: t
- * kept-new-versions: 5
- * c-indent-level: 8
- * c-basic-offset: 8
- * tab-width: 8
- * End:
- */
-
diff --git a/original/uapi/linux/if_bridge.h b/original/uapi/linux/if_bridge.h
index 13d59c5..2711c35 100644
--- a/original/uapi/linux/if_bridge.h
+++ b/original/uapi/linux/if_bridge.h
@@ -479,16 +479,22 @@
/* flags used in BRIDGE_VLANDB_DUMP_FLAGS attribute to affect dumps */
#define BRIDGE_VLANDB_DUMPF_STATS (1 << 0) /* Include stats in the dump */
+#define BRIDGE_VLANDB_DUMPF_GLOBAL (1 << 1) /* Dump global vlan options only */
/* Bridge vlan RTM attributes
* [BRIDGE_VLANDB_ENTRY] = {
* [BRIDGE_VLANDB_ENTRY_INFO]
* ...
* }
+ * [BRIDGE_VLANDB_GLOBAL_OPTIONS] = {
+ * [BRIDGE_VLANDB_GOPTS_ID]
+ * ...
+ * }
*/
enum {
BRIDGE_VLANDB_UNSPEC,
BRIDGE_VLANDB_ENTRY,
+ BRIDGE_VLANDB_GLOBAL_OPTIONS,
__BRIDGE_VLANDB_MAX,
};
#define BRIDGE_VLANDB_MAX (__BRIDGE_VLANDB_MAX - 1)
@@ -500,6 +506,7 @@
BRIDGE_VLANDB_ENTRY_STATE,
BRIDGE_VLANDB_ENTRY_TUNNEL_INFO,
BRIDGE_VLANDB_ENTRY_STATS,
+ BRIDGE_VLANDB_ENTRY_MCAST_ROUTER,
__BRIDGE_VLANDB_ENTRY_MAX,
};
#define BRIDGE_VLANDB_ENTRY_MAX (__BRIDGE_VLANDB_ENTRY_MAX - 1)
@@ -538,6 +545,29 @@
};
#define BRIDGE_VLANDB_STATS_MAX (__BRIDGE_VLANDB_STATS_MAX - 1)
+enum {
+ BRIDGE_VLANDB_GOPTS_UNSPEC,
+ BRIDGE_VLANDB_GOPTS_ID,
+ BRIDGE_VLANDB_GOPTS_RANGE,
+ BRIDGE_VLANDB_GOPTS_MCAST_SNOOPING,
+ BRIDGE_VLANDB_GOPTS_MCAST_IGMP_VERSION,
+ BRIDGE_VLANDB_GOPTS_MCAST_MLD_VERSION,
+ BRIDGE_VLANDB_GOPTS_MCAST_LAST_MEMBER_CNT,
+ BRIDGE_VLANDB_GOPTS_MCAST_STARTUP_QUERY_CNT,
+ BRIDGE_VLANDB_GOPTS_MCAST_LAST_MEMBER_INTVL,
+ BRIDGE_VLANDB_GOPTS_PAD,
+ BRIDGE_VLANDB_GOPTS_MCAST_MEMBERSHIP_INTVL,
+ BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_INTVL,
+ BRIDGE_VLANDB_GOPTS_MCAST_QUERY_INTVL,
+ BRIDGE_VLANDB_GOPTS_MCAST_QUERY_RESPONSE_INTVL,
+ BRIDGE_VLANDB_GOPTS_MCAST_STARTUP_QUERY_INTVL,
+ BRIDGE_VLANDB_GOPTS_MCAST_QUERIER,
+ BRIDGE_VLANDB_GOPTS_MCAST_ROUTER_PORTS,
+ BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE,
+ __BRIDGE_VLANDB_GOPTS_MAX
+};
+#define BRIDGE_VLANDB_GOPTS_MAX (__BRIDGE_VLANDB_GOPTS_MAX - 1)
+
/* Bridge multicast database attributes
* [MDBA_MDB] = {
* [MDBA_MDB_ENTRY] = {
@@ -627,6 +657,9 @@
MDBA_ROUTER_PATTR_UNSPEC,
MDBA_ROUTER_PATTR_TIMER,
MDBA_ROUTER_PATTR_TYPE,
+ MDBA_ROUTER_PATTR_INET_TIMER,
+ MDBA_ROUTER_PATTR_INET6_TIMER,
+ MDBA_ROUTER_PATTR_VID,
__MDBA_ROUTER_PATTR_MAX
};
#define MDBA_ROUTER_PATTR_MAX (__MDBA_ROUTER_PATTR_MAX - 1)
@@ -718,12 +751,14 @@
/* bridge boolean options
* BR_BOOLOPT_NO_LL_LEARN - disable learning from link-local packets
+ * BR_BOOLOPT_MCAST_VLAN_SNOOPING - control vlan multicast snooping
*
* IMPORTANT: if adding a new option do not forget to handle
* it in br_boolopt_toggle/get and bridge sysfs
*/
enum br_boolopt_id {
BR_BOOLOPT_NO_LL_LEARN,
+ BR_BOOLOPT_MCAST_VLAN_SNOOPING,
BR_BOOLOPT_MAX
};
@@ -736,4 +771,17 @@
__u32 optval;
__u32 optmask;
};
+
+enum {
+ BRIDGE_QUERIER_UNSPEC,
+ BRIDGE_QUERIER_IP_ADDRESS,
+ BRIDGE_QUERIER_IP_PORT,
+ BRIDGE_QUERIER_IP_OTHER_TIMER,
+ BRIDGE_QUERIER_PAD,
+ BRIDGE_QUERIER_IPV6_ADDRESS,
+ BRIDGE_QUERIER_IPV6_PORT,
+ BRIDGE_QUERIER_IPV6_OTHER_TIMER,
+ __BRIDGE_QUERIER_MAX
+};
+#define BRIDGE_QUERIER_MAX (__BRIDGE_QUERIER_MAX - 1)
#endif /* _UAPI_LINUX_IF_BRIDGE_H */
diff --git a/original/uapi/linux/if_ether.h b/original/uapi/linux/if_ether.h
index a0b6379..c0c2f3e 100644
--- a/original/uapi/linux/if_ether.h
+++ b/original/uapi/linux/if_ether.h
@@ -86,6 +86,7 @@
* over Ethernet
*/
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#define ETH_P_REALTEK 0x8899 /* Multiple proprietary protocols */
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */
#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */
@@ -116,7 +117,7 @@
#define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */
#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less than this value
+#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is more than this value
* then the frame is Ethernet II. Else it is 802.3 */
/*
@@ -151,6 +152,9 @@
#define ETH_P_MAP 0x00F9 /* Qualcomm multiplexing and
* aggregation protocol
*/
+#define ETH_P_MCTP 0x00FA /* Management component transport
+ * protocol packets
+ */
/*
* This is an Ethernet frame header.
diff --git a/original/uapi/linux/if_fddi.h b/original/uapi/linux/if_fddi.h
index 7239aa9..8df2d99 100644
--- a/original/uapi/linux/if_fddi.h
+++ b/original/uapi/linux/if_fddi.h
@@ -9,7 +9,7 @@
* Version: @(#)if_fddi.h 1.0.3 Oct 6 2018
*
* Author: Lawrence V. Stefani, <stefani@yahoo.com>
- * Maintainer: Maciej W. Rozycki, <macro@linux-mips.org>
+ * Maintainer: Maciej W. Rozycki, <macro@orcam.me.uk>
*
* if_fddi.h is based on previous if_ether.h and if_tr.h work by
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
diff --git a/original/uapi/linux/if_link.h b/original/uapi/linux/if_link.h
index 91c8dda..6218f93 100644
--- a/original/uapi/linux/if_link.h
+++ b/original/uapi/linux/if_link.h
@@ -341,6 +341,14 @@
IFLA_ALT_IFNAME, /* Alternative ifname */
IFLA_PERM_ADDRESS,
IFLA_PROTO_DOWN_REASON,
+
+ /* device (sysfs) name as parent, used instead
+ * of IFLA_LINK where there's no parent netdev
+ */
+ IFLA_PARENT_DEV_NAME,
+ IFLA_PARENT_DEV_BUS_NAME,
+ IFLA_GRO_MAX_SIZE,
+
__IFLA_MAX
};
@@ -410,6 +418,7 @@
IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */
IFLA_INET6_TOKEN, /* device token */
IFLA_INET6_ADDR_GEN_MODE, /* implicit address generator mode */
+ IFLA_INET6_RA_MTU, /* mtu carried in the RA message */
__IFLA_INET6_MAX
};
@@ -472,6 +481,7 @@
IFLA_BR_MCAST_MLD_VERSION,
IFLA_BR_VLAN_STATS_PER_PORT,
IFLA_BR_MULTI_BOOLOPT,
+ IFLA_BR_MCAST_QUERIER_STATE,
__IFLA_BR_MAX,
};
@@ -614,6 +624,7 @@
};
#define MACVLAN_FLAG_NOPROMISC 1
+#define MACVLAN_FLAG_NODST 2 /* skip dst macvlan if matching src macvlan */
/* VRF section */
enum {
@@ -847,6 +858,8 @@
IFLA_BOND_AD_ACTOR_SYSTEM,
IFLA_BOND_TLB_DYNAMIC_LB,
IFLA_BOND_PEER_NOTIF_DELAY,
+ IFLA_BOND_AD_LACP_ACTIVE,
+ IFLA_BOND_MISSED_MAX,
__IFLA_BOND_MAX,
};
@@ -1235,6 +1248,8 @@
#define RMNET_FLAGS_INGRESS_MAP_COMMANDS (1U << 1)
#define RMNET_FLAGS_INGRESS_MAP_CKSUMV4 (1U << 2)
#define RMNET_FLAGS_EGRESS_MAP_CKSUMV4 (1U << 3)
+#define RMNET_FLAGS_INGRESS_MAP_CKSUMV5 (1U << 4)
+#define RMNET_FLAGS_EGRESS_MAP_CKSUMV5 (1U << 5)
enum {
IFLA_RMNET_UNSPEC,
@@ -1250,4 +1265,14 @@
__u32 mask;
};
+/* MCTP section */
+
+enum {
+ IFLA_MCTP_UNSPEC,
+ IFLA_MCTP_NET,
+ __IFLA_MCTP_MAX,
+};
+
+#define IFLA_MCTP_MAX (__IFLA_MCTP_MAX - 1)
+
#endif /* _UAPI_LINUX_IF_LINK_H */
diff --git a/original/uapi/linux/iio/buffer.h b/original/uapi/linux/iio/buffer.h
new file mode 100644
index 0000000..1393903
--- /dev/null
+++ b/original/uapi/linux/iio/buffer.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* industrial I/O buffer definitions needed both in and out of kernel
+ */
+
+#ifndef _UAPI_IIO_BUFFER_H_
+#define _UAPI_IIO_BUFFER_H_
+
+#define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0x91, int)
+
+#endif /* _UAPI_IIO_BUFFER_H_ */
diff --git a/original/uapi/linux/in.h b/original/uapi/linux/in.h
index 7d66876..1416822 100644
--- a/original/uapi/linux/in.h
+++ b/original/uapi/linux/in.h
@@ -188,11 +188,22 @@
};
struct ip_msfilter {
- __be32 imsf_multiaddr;
- __be32 imsf_interface;
- __u32 imsf_fmode;
- __u32 imsf_numsrc;
- __be32 imsf_slist[1];
+ union {
+ struct {
+ __be32 imsf_multiaddr_aux;
+ __be32 imsf_interface_aux;
+ __u32 imsf_fmode_aux;
+ __u32 imsf_numsrc_aux;
+ __be32 imsf_slist[1];
+ };
+ struct {
+ __be32 imsf_multiaddr;
+ __be32 imsf_interface;
+ __u32 imsf_fmode;
+ __u32 imsf_numsrc;
+ __be32 imsf_slist_flex[];
+ };
+ };
};
#define IP_MSFILTER_SIZE(numsrc) \
@@ -211,11 +222,22 @@
};
struct group_filter {
- __u32 gf_interface; /* interface index */
- struct __kernel_sockaddr_storage gf_group; /* multicast address */
- __u32 gf_fmode; /* filter mode */
- __u32 gf_numsrc; /* number of sources */
- struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */
+ union {
+ struct {
+ __u32 gf_interface_aux; /* interface index */
+ struct __kernel_sockaddr_storage gf_group_aux; /* multicast address */
+ __u32 gf_fmode_aux; /* filter mode */
+ __u32 gf_numsrc_aux; /* number of sources */
+ struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */
+ };
+ struct {
+ __u32 gf_interface; /* interface index */
+ struct __kernel_sockaddr_storage gf_group; /* multicast address */
+ __u32 gf_fmode; /* filter mode */
+ __u32 gf_numsrc; /* number of sources */
+ struct __kernel_sockaddr_storage gf_slist_flex[]; /* interface index */
+ };
+ };
};
#define GROUP_FILTER_SIZE(numsrc) \
@@ -289,6 +311,9 @@
/* Address indicating an error return. */
#define INADDR_NONE ((unsigned long int) 0xffffffff)
+/* Dummy address for src of ICMP replies if no real address is set (RFC7600). */
+#define INADDR_DUMMY ((unsigned long int) 0xc0000008)
+
/* Network number for local host loopback. */
#define IN_LOOPBACKNET 127
diff --git a/original/uapi/linux/in6.h b/original/uapi/linux/in6.h
index 5ad396a..c4c53a9 100644
--- a/original/uapi/linux/in6.h
+++ b/original/uapi/linux/in6.h
@@ -145,6 +145,7 @@
#define IPV6_TLV_PADN 1
#define IPV6_TLV_ROUTERALERT 5
#define IPV6_TLV_CALIPSO 7 /* RFC 5570 */
+#define IPV6_TLV_IOAM 49 /* TEMPORARY IANA allocation for IOAM */
#define IPV6_TLV_JUMBO 194
#define IPV6_TLV_HAO 201 /* home address option */
diff --git a/original/uapi/linux/incrementalfs.h b/original/uapi/linux/incrementalfs.h
index f1a6199..f8338af 100644
--- a/original/uapi/linux/incrementalfs.h
+++ b/original/uapi/linux/incrementalfs.h
@@ -580,7 +580,11 @@
/* errno of last read error */
__u32 errno_out;
- __u64 reserved;
+ /* uid of last read error */
+ __u32 uid_out;
+
+ __u32 reserved1;
+ __u64 reserved2;
};
#endif /* _UAPI_LINUX_INCREMENTALFS_H */
diff --git a/original/uapi/linux/input-event-codes.h b/original/uapi/linux/input-event-codes.h
index ee93428..7989d94 100644
--- a/original/uapi/linux/input-event-codes.h
+++ b/original/uapi/linux/input-event-codes.h
@@ -278,7 +278,8 @@
#define KEY_PAUSECD 201
#define KEY_PROG3 202
#define KEY_PROG4 203
-#define KEY_DASHBOARD 204 /* AL Dashboard */
+#define KEY_ALL_APPLICATIONS 204 /* AC Desktop Show All Applications */
+#define KEY_DASHBOARD KEY_ALL_APPLICATIONS
#define KEY_SUSPEND 205
#define KEY_CLOSE 206 /* AC Close */
#define KEY_PLAY 207
@@ -611,6 +612,8 @@
#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
#define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */
#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */
+#define KEY_EMOJI_PICKER 0x249 /* Show/hide emoji picker (HUTRR101) */
+#define KEY_DICTATE 0x24a /* Start or Stop Voice Dictation Session (HUTRR99) */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
diff --git a/original/uapi/linux/io_uring.h b/original/uapi/linux/io_uring.h
index 2514eb6..787f491 100644
--- a/original/uapi/linux/io_uring.h
+++ b/original/uapi/linux/io_uring.h
@@ -44,23 +44,23 @@
__u32 splice_flags;
__u32 rename_flags;
__u32 unlink_flags;
+ __u32 hardlink_flags;
};
__u64 user_data; /* data to be passed back at completion time */
+ /* pack this to avoid bogus arm OABI complaints */
union {
- struct {
- /* pack this to avoid bogus arm OABI complaints */
- union {
- /* index into fixed buffers, if used */
- __u16 buf_index;
- /* for grouped buffer selection */
- __u16 buf_group;
- } __attribute__((packed));
- /* personality to use, if used */
- __u16 personality;
- __s32 splice_fd_in;
- };
- __u64 __pad2[3];
+ /* index into fixed buffers, if used */
+ __u16 buf_index;
+ /* for grouped buffer selection */
+ __u16 buf_group;
+ } __attribute__((packed));
+ /* personality to use, if used */
+ __u16 personality;
+ union {
+ __s32 splice_fd_in;
+ __u32 file_index;
};
+ __u64 __pad2[2];
};
enum {
@@ -70,6 +70,7 @@
IOSQE_IO_HARDLINK_BIT,
IOSQE_ASYNC_BIT,
IOSQE_BUFFER_SELECT_BIT,
+ IOSQE_CQE_SKIP_SUCCESS_BIT,
};
/*
@@ -87,6 +88,8 @@
#define IOSQE_ASYNC (1U << IOSQE_ASYNC_BIT)
/* select buffer from sqe->buf_group */
#define IOSQE_BUFFER_SELECT (1U << IOSQE_BUFFER_SELECT_BIT)
+/* don't post CQE if request succeeded */
+#define IOSQE_CQE_SKIP_SUCCESS (1U << IOSQE_CQE_SKIP_SUCCESS_BIT)
/*
* io_uring_setup() flags
@@ -137,6 +140,9 @@
IORING_OP_SHUTDOWN,
IORING_OP_RENAMEAT,
IORING_OP_UNLINKAT,
+ IORING_OP_MKDIRAT,
+ IORING_OP_SYMLINKAT,
+ IORING_OP_LINKAT,
/* this goes last, obviously */
IORING_OP_LAST,
@@ -150,9 +156,14 @@
/*
* sqe->timeout_flags
*/
-#define IORING_TIMEOUT_ABS (1U << 0)
-#define IORING_TIMEOUT_UPDATE (1U << 1)
-
+#define IORING_TIMEOUT_ABS (1U << 0)
+#define IORING_TIMEOUT_UPDATE (1U << 1)
+#define IORING_TIMEOUT_BOOTTIME (1U << 2)
+#define IORING_TIMEOUT_REALTIME (1U << 3)
+#define IORING_LINK_TIMEOUT_UPDATE (1U << 4)
+#define IORING_TIMEOUT_ETIME_SUCCESS (1U << 5)
+#define IORING_TIMEOUT_CLOCK_MASK (IORING_TIMEOUT_BOOTTIME | IORING_TIMEOUT_REALTIME)
+#define IORING_TIMEOUT_UPDATE_MASK (IORING_TIMEOUT_UPDATE | IORING_LINK_TIMEOUT_UPDATE)
/*
* sqe->splice_flags
* extends splice(2) flags
@@ -160,6 +171,21 @@
#define SPLICE_F_FD_IN_FIXED (1U << 31) /* the last bit of __u32 */
/*
+ * POLL_ADD flags. Note that since sqe->poll_events is the flag space, the
+ * command flags for POLL_ADD are stored in sqe->len.
+ *
+ * IORING_POLL_ADD_MULTI Multishot poll. Sets IORING_CQE_F_MORE if
+ * the poll handler will continue to report
+ * CQEs on behalf of the same SQE.
+ *
+ * IORING_POLL_UPDATE Update existing poll request, matching
+ * sqe->addr as the old user_data field.
+ */
+#define IORING_POLL_ADD_MULTI (1U << 0)
+#define IORING_POLL_UPDATE_EVENTS (1U << 1)
+#define IORING_POLL_UPDATE_USER_DATA (1U << 2)
+
+/*
* IO completion data structure (Completion Queue Entry)
*/
struct io_uring_cqe {
@@ -172,8 +198,10 @@
* cqe->flags
*
* IORING_CQE_F_BUFFER If set, the upper 16 bits are the buffer ID
+ * IORING_CQE_F_MORE If set, parent SQE will generate more CQE entries
*/
#define IORING_CQE_F_BUFFER (1U << 0)
+#define IORING_CQE_F_MORE (1U << 1)
enum {
IORING_CQE_BUFFER_SHIFT = 16,
@@ -263,6 +291,8 @@
#define IORING_FEAT_SQPOLL_NONFIXED (1U << 7)
#define IORING_FEAT_EXT_ARG (1U << 8)
#define IORING_FEAT_NATIVE_WORKERS (1U << 9)
+#define IORING_FEAT_RSRC_TAGS (1U << 10)
+#define IORING_FEAT_CQE_SKIP (1U << 11)
/*
* io_uring_register(2) opcodes and arguments
@@ -282,10 +312,29 @@
IORING_REGISTER_RESTRICTIONS = 11,
IORING_REGISTER_ENABLE_RINGS = 12,
+ /* extended with tagging */
+ IORING_REGISTER_FILES2 = 13,
+ IORING_REGISTER_FILES_UPDATE2 = 14,
+ IORING_REGISTER_BUFFERS2 = 15,
+ IORING_REGISTER_BUFFERS_UPDATE = 16,
+
+ /* set/clear io-wq thread affinities */
+ IORING_REGISTER_IOWQ_AFF = 17,
+ IORING_UNREGISTER_IOWQ_AFF = 18,
+
+ /* set/get max number of io-wq workers */
+ IORING_REGISTER_IOWQ_MAX_WORKERS = 19,
+
/* this goes last */
IORING_REGISTER_LAST
};
+/* io-wq worker categories */
+enum {
+ IO_WQ_BOUND,
+ IO_WQ_UNBOUND,
+};
+
/* deprecated, see struct io_uring_rsrc_update */
struct io_uring_files_update {
__u32 offset;
@@ -293,12 +342,29 @@
__aligned_u64 /* __s32 * */ fds;
};
+struct io_uring_rsrc_register {
+ __u32 nr;
+ __u32 resv;
+ __u64 resv2;
+ __aligned_u64 data;
+ __aligned_u64 tags;
+};
+
struct io_uring_rsrc_update {
__u32 offset;
__u32 resv;
__aligned_u64 data;
};
+struct io_uring_rsrc_update2 {
+ __u32 offset;
+ __u32 resv;
+ __aligned_u64 data;
+ __aligned_u64 tags;
+ __u32 nr;
+ __u32 resv2;
+};
+
/* Skip updating fd indexes set to this value in the fd table */
#define IORING_REGISTER_FILES_SKIP (-2)
diff --git a/original/uapi/linux/ioam6.h b/original/uapi/linux/ioam6.h
new file mode 100644
index 0000000..ac4de37
--- /dev/null
+++ b/original/uapi/linux/ioam6.h
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * IPv6 IOAM implementation
+ *
+ * Author:
+ * Justin Iurman <justin.iurman@uliege.be>
+ */
+
+#ifndef _UAPI_LINUX_IOAM6_H
+#define _UAPI_LINUX_IOAM6_H
+
+#include <asm/byteorder.h>
+#include <linux/types.h>
+
+#define IOAM6_U16_UNAVAILABLE U16_MAX
+#define IOAM6_U32_UNAVAILABLE U32_MAX
+#define IOAM6_U64_UNAVAILABLE U64_MAX
+
+#define IOAM6_DEFAULT_ID (IOAM6_U32_UNAVAILABLE >> 8)
+#define IOAM6_DEFAULT_ID_WIDE (IOAM6_U64_UNAVAILABLE >> 8)
+#define IOAM6_DEFAULT_IF_ID IOAM6_U16_UNAVAILABLE
+#define IOAM6_DEFAULT_IF_ID_WIDE IOAM6_U32_UNAVAILABLE
+
+/*
+ * IPv6 IOAM Option Header
+ */
+struct ioam6_hdr {
+ __u8 opt_type;
+ __u8 opt_len;
+ __u8 :8; /* reserved */
+#define IOAM6_TYPE_PREALLOC 0
+ __u8 type;
+} __attribute__((packed));
+
+/*
+ * IOAM Trace Header
+ */
+struct ioam6_trace_hdr {
+ __be16 namespace_id;
+
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+
+ __u8 :1, /* unused */
+ :1, /* unused */
+ overflow:1,
+ nodelen:5;
+
+ __u8 remlen:7,
+ :1; /* unused */
+
+ union {
+ __be32 type_be32;
+
+ struct {
+ __u32 bit7:1,
+ bit6:1,
+ bit5:1,
+ bit4:1,
+ bit3:1,
+ bit2:1,
+ bit1:1,
+ bit0:1,
+ bit15:1, /* unused */
+ bit14:1, /* unused */
+ bit13:1, /* unused */
+ bit12:1, /* unused */
+ bit11:1,
+ bit10:1,
+ bit9:1,
+ bit8:1,
+ bit23:1, /* reserved */
+ bit22:1,
+ bit21:1, /* unused */
+ bit20:1, /* unused */
+ bit19:1, /* unused */
+ bit18:1, /* unused */
+ bit17:1, /* unused */
+ bit16:1, /* unused */
+ :8; /* reserved */
+ } type;
+ };
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+
+ __u8 nodelen:5,
+ overflow:1,
+ :1, /* unused */
+ :1; /* unused */
+
+ __u8 :1, /* unused */
+ remlen:7;
+
+ union {
+ __be32 type_be32;
+
+ struct {
+ __u32 bit0:1,
+ bit1:1,
+ bit2:1,
+ bit3:1,
+ bit4:1,
+ bit5:1,
+ bit6:1,
+ bit7:1,
+ bit8:1,
+ bit9:1,
+ bit10:1,
+ bit11:1,
+ bit12:1, /* unused */
+ bit13:1, /* unused */
+ bit14:1, /* unused */
+ bit15:1, /* unused */
+ bit16:1, /* unused */
+ bit17:1, /* unused */
+ bit18:1, /* unused */
+ bit19:1, /* unused */
+ bit20:1, /* unused */
+ bit21:1, /* unused */
+ bit22:1,
+ bit23:1, /* reserved */
+ :8; /* reserved */
+ } type;
+ };
+
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+
+#define IOAM6_TRACE_DATA_SIZE_MAX 244
+ __u8 data[0];
+} __attribute__((packed));
+
+#endif /* _UAPI_LINUX_IOAM6_H */
diff --git a/original/uapi/linux/ioam6_genl.h b/original/uapi/linux/ioam6_genl.h
new file mode 100644
index 0000000..ca4b228
--- /dev/null
+++ b/original/uapi/linux/ioam6_genl.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * IPv6 IOAM Generic Netlink API
+ *
+ * Author:
+ * Justin Iurman <justin.iurman@uliege.be>
+ */
+
+#ifndef _UAPI_LINUX_IOAM6_GENL_H
+#define _UAPI_LINUX_IOAM6_GENL_H
+
+#define IOAM6_GENL_NAME "IOAM6"
+#define IOAM6_GENL_VERSION 0x1
+
+enum {
+ IOAM6_ATTR_UNSPEC,
+
+ IOAM6_ATTR_NS_ID, /* u16 */
+ IOAM6_ATTR_NS_DATA, /* u32 */
+ IOAM6_ATTR_NS_DATA_WIDE,/* u64 */
+
+#define IOAM6_MAX_SCHEMA_DATA_LEN (255 * 4)
+ IOAM6_ATTR_SC_ID, /* u32 */
+ IOAM6_ATTR_SC_DATA, /* Binary */
+ IOAM6_ATTR_SC_NONE, /* Flag */
+
+ IOAM6_ATTR_PAD,
+
+ __IOAM6_ATTR_MAX,
+};
+
+#define IOAM6_ATTR_MAX (__IOAM6_ATTR_MAX - 1)
+
+enum {
+ IOAM6_CMD_UNSPEC,
+
+ IOAM6_CMD_ADD_NAMESPACE,
+ IOAM6_CMD_DEL_NAMESPACE,
+ IOAM6_CMD_DUMP_NAMESPACES,
+
+ IOAM6_CMD_ADD_SCHEMA,
+ IOAM6_CMD_DEL_SCHEMA,
+ IOAM6_CMD_DUMP_SCHEMAS,
+
+ IOAM6_CMD_NS_SET_SCHEMA,
+
+ __IOAM6_CMD_MAX,
+};
+
+#define IOAM6_CMD_MAX (__IOAM6_CMD_MAX - 1)
+
+#endif /* _UAPI_LINUX_IOAM6_GENL_H */
diff --git a/original/uapi/linux/ioam6_iptunnel.h b/original/uapi/linux/ioam6_iptunnel.h
new file mode 100644
index 0000000..829ffdf
--- /dev/null
+++ b/original/uapi/linux/ioam6_iptunnel.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * IPv6 IOAM Lightweight Tunnel API
+ *
+ * Author:
+ * Justin Iurman <justin.iurman@uliege.be>
+ */
+
+#ifndef _UAPI_LINUX_IOAM6_IPTUNNEL_H
+#define _UAPI_LINUX_IOAM6_IPTUNNEL_H
+
+/* Encap modes:
+ * - inline: direct insertion
+ * - encap: ip6ip6 encapsulation
+ * - auto: inline for local packets, encap for in-transit packets
+ */
+enum {
+ __IOAM6_IPTUNNEL_MODE_MIN,
+
+ IOAM6_IPTUNNEL_MODE_INLINE,
+ IOAM6_IPTUNNEL_MODE_ENCAP,
+ IOAM6_IPTUNNEL_MODE_AUTO,
+
+ __IOAM6_IPTUNNEL_MODE_MAX,
+};
+
+#define IOAM6_IPTUNNEL_MODE_MIN (__IOAM6_IPTUNNEL_MODE_MIN + 1)
+#define IOAM6_IPTUNNEL_MODE_MAX (__IOAM6_IPTUNNEL_MODE_MAX - 1)
+
+enum {
+ IOAM6_IPTUNNEL_UNSPEC,
+
+ /* Encap mode */
+ IOAM6_IPTUNNEL_MODE, /* u8 */
+
+ /* Tunnel dst address.
+ * For encap,auto modes.
+ */
+ IOAM6_IPTUNNEL_DST, /* struct in6_addr */
+
+ /* IOAM Trace Header */
+ IOAM6_IPTUNNEL_TRACE, /* struct ioam6_trace_hdr */
+
+ __IOAM6_IPTUNNEL_MAX,
+};
+
+#define IOAM6_IPTUNNEL_MAX (__IOAM6_IPTUNNEL_MAX - 1)
+
+#endif /* _UAPI_LINUX_IOAM6_IPTUNNEL_H */
diff --git a/original/uapi/linux/iommu.h b/original/uapi/linux/iommu.h
index e1d9e75..59178fc 100644
--- a/original/uapi/linux/iommu.h
+++ b/original/uapi/linux/iommu.h
@@ -288,7 +288,8 @@
#define IOMMU_SVA_VTD_GPASID_PWT (1 << 3) /* page-level write through */
#define IOMMU_SVA_VTD_GPASID_EMTE (1 << 4) /* extended mem type enable */
#define IOMMU_SVA_VTD_GPASID_CD (1 << 5) /* PASID-level cache disable */
-#define IOMMU_SVA_VTD_GPASID_LAST (1 << 6)
+#define IOMMU_SVA_VTD_GPASID_WPE (1 << 6) /* Write protect enable */
+#define IOMMU_SVA_VTD_GPASID_LAST (1 << 7)
__u64 flags;
__u32 pat;
__u32 emt;
diff --git a/original/uapi/linux/ioprio.h b/original/uapi/linux/ioprio.h
new file mode 100644
index 0000000..f70f259
--- /dev/null
+++ b/original/uapi/linux/ioprio.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_IOPRIO_H
+#define _UAPI_LINUX_IOPRIO_H
+
+/*
+ * Gives us 8 prio classes with 13-bits of data for each class
+ */
+#define IOPRIO_CLASS_SHIFT 13
+#define IOPRIO_CLASS_MASK 0x07
+#define IOPRIO_PRIO_MASK ((1UL << IOPRIO_CLASS_SHIFT) - 1)
+
+#define IOPRIO_PRIO_CLASS(ioprio) \
+ (((ioprio) >> IOPRIO_CLASS_SHIFT) & IOPRIO_CLASS_MASK)
+#define IOPRIO_PRIO_DATA(ioprio) ((ioprio) & IOPRIO_PRIO_MASK)
+#define IOPRIO_PRIO_VALUE(class, data) \
+ ((((class) & IOPRIO_CLASS_MASK) << IOPRIO_CLASS_SHIFT) | \
+ ((data) & IOPRIO_PRIO_MASK))
+
+/*
+ * These are the io priority groups as implemented by the BFQ and mq-deadline
+ * schedulers. RT is the realtime class, it always gets premium service. For
+ * ATA disks supporting NCQ IO priority, RT class IOs will be processed using
+ * high priority NCQ commands. BE is the best-effort scheduling class, the
+ * default for any process. IDLE is the idle scheduling class, it is only
+ * served when no one else is using the disk.
+ */
+enum {
+ IOPRIO_CLASS_NONE,
+ IOPRIO_CLASS_RT,
+ IOPRIO_CLASS_BE,
+ IOPRIO_CLASS_IDLE,
+};
+
+/*
+ * The RT and BE priority classes both support up to 8 priority levels.
+ */
+#define IOPRIO_NR_LEVELS 8
+#define IOPRIO_BE_NR IOPRIO_NR_LEVELS
+
+enum {
+ IOPRIO_WHO_PROCESS = 1,
+ IOPRIO_WHO_PGRP,
+ IOPRIO_WHO_USER,
+};
+
+/*
+ * Fallback BE priority level.
+ */
+#define IOPRIO_NORM 4
+#define IOPRIO_BE_NORM IOPRIO_NORM
+
+#endif /* _UAPI_LINUX_IOPRIO_H */
diff --git a/original/uapi/linux/ip.h b/original/uapi/linux/ip.h
index e42d13b..e00bbb9 100644
--- a/original/uapi/linux/ip.h
+++ b/original/uapi/linux/ip.h
@@ -169,6 +169,7 @@
IPV4_DEVCONF_DROP_UNICAST_IN_L2_MULTICAST,
IPV4_DEVCONF_DROP_GRATUITOUS_ARP,
IPV4_DEVCONF_BC_FORWARDING,
+ IPV4_DEVCONF_ARP_EVICT_NOCARRIER,
__IPV4_DEVCONF_MAX
};
diff --git a/original/uapi/linux/ipmi.h b/original/uapi/linux/ipmi.h
index 32d1483..966c307 100644
--- a/original/uapi/linux/ipmi.h
+++ b/original/uapi/linux/ipmi.h
@@ -81,6 +81,20 @@
};
/*
+ * Used for messages received directly from an IPMB that have not gone
+ * through a MC. This is for systems that sit right on an IPMB so
+ * they can receive commands and respond to them.
+ */
+#define IPMI_IPMB_DIRECT_ADDR_TYPE 0x81
+struct ipmi_ipmb_direct_addr {
+ int addr_type;
+ short channel;
+ unsigned char slave_addr;
+ unsigned char rs_lun;
+ unsigned char rq_lun;
+};
+
+/*
* A LAN Address. This is an address to/from a LAN interface bridged
* by the BMC, not an address actually out on the LAN.
*
@@ -158,7 +172,7 @@
* is used for the receive in-kernel interface and in the receive
* IOCTL.
*
- * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
+ * The "IPMI_RESPONSE_RESPONSE_TYPE" is a little strange sounding, but
* it allows you to get the message results when you send a response
* message.
*/
diff --git a/original/uapi/linux/ipv6.h b/original/uapi/linux/ipv6.h
index 7060377..d4178da 100644
--- a/original/uapi/linux/ipv6.h
+++ b/original/uapi/linux/ipv6.h
@@ -190,6 +190,10 @@
DEVCONF_NDISC_TCLASS,
DEVCONF_RPL_SEG_ENABLED,
DEVCONF_RA_DEFRTR_METRIC,
+ DEVCONF_IOAM6_ENABLED,
+ DEVCONF_IOAM6_ID,
+ DEVCONF_IOAM6_ID_WIDE,
+ DEVCONF_NDISC_EVICT_NOCARRIER,
DEVCONF_MAX
};
diff --git a/original/uapi/linux/ipx.h b/original/uapi/linux/ipx.h
deleted file mode 100644
index 3168137..0000000
--- a/original/uapi/linux/ipx.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _IPX_H_
-#define _IPX_H_
-#include <linux/libc-compat.h> /* for compatibility with glibc netipx/ipx.h */
-#include <linux/types.h>
-#include <linux/sockios.h>
-#include <linux/socket.h>
-#define IPX_NODE_LEN 6
-#define IPX_MTU 576
-
-#if __UAPI_DEF_SOCKADDR_IPX
-struct sockaddr_ipx {
- __kernel_sa_family_t sipx_family;
- __be16 sipx_port;
- __be32 sipx_network;
- unsigned char sipx_node[IPX_NODE_LEN];
- __u8 sipx_type;
- unsigned char sipx_zero; /* 16 byte fill */
-};
-#endif /* __UAPI_DEF_SOCKADDR_IPX */
-
-/*
- * So we can fit the extra info for SIOCSIFADDR into the address nicely
- */
-#define sipx_special sipx_port
-#define sipx_action sipx_zero
-#define IPX_DLTITF 0
-#define IPX_CRTITF 1
-
-#if __UAPI_DEF_IPX_ROUTE_DEFINITION
-struct ipx_route_definition {
- __be32 ipx_network;
- __be32 ipx_router_network;
- unsigned char ipx_router_node[IPX_NODE_LEN];
-};
-#endif /* __UAPI_DEF_IPX_ROUTE_DEFINITION */
-
-#if __UAPI_DEF_IPX_INTERFACE_DEFINITION
-struct ipx_interface_definition {
- __be32 ipx_network;
- unsigned char ipx_device[16];
- unsigned char ipx_dlink_type;
-#define IPX_FRAME_NONE 0
-#define IPX_FRAME_SNAP 1
-#define IPX_FRAME_8022 2
-#define IPX_FRAME_ETHERII 3
-#define IPX_FRAME_8023 4
-#define IPX_FRAME_TR_8022 5 /* obsolete */
- unsigned char ipx_special;
-#define IPX_SPECIAL_NONE 0
-#define IPX_PRIMARY 1
-#define IPX_INTERNAL 2
- unsigned char ipx_node[IPX_NODE_LEN];
-};
-#endif /* __UAPI_DEF_IPX_INTERFACE_DEFINITION */
-
-#if __UAPI_DEF_IPX_CONFIG_DATA
-struct ipx_config_data {
- unsigned char ipxcfg_auto_select_primary;
- unsigned char ipxcfg_auto_create_interfaces;
-};
-#endif /* __UAPI_DEF_IPX_CONFIG_DATA */
-
-/*
- * OLD Route Definition for backward compatibility.
- */
-
-#if __UAPI_DEF_IPX_ROUTE_DEF
-struct ipx_route_def {
- __be32 ipx_network;
- __be32 ipx_router_network;
-#define IPX_ROUTE_NO_ROUTER 0
- unsigned char ipx_router_node[IPX_NODE_LEN];
- unsigned char ipx_device[16];
- unsigned short ipx_flags;
-#define IPX_RT_SNAP 8
-#define IPX_RT_8022 4
-#define IPX_RT_BLUEBOOK 2
-#define IPX_RT_ROUTED 1
-};
-#endif /* __UAPI_DEF_IPX_ROUTE_DEF */
-
-#define SIOCAIPXITFCRT (SIOCPROTOPRIVATE)
-#define SIOCAIPXPRISLT (SIOCPROTOPRIVATE + 1)
-#define SIOCIPXCFGDATA (SIOCPROTOPRIVATE + 2)
-#define SIOCIPXNCPCONN (SIOCPROTOPRIVATE + 3)
-#endif /* _IPX_H_ */
diff --git a/original/uapi/linux/kexec.h b/original/uapi/linux/kexec.h
index 05669c8..778dc19 100644
--- a/original/uapi/linux/kexec.h
+++ b/original/uapi/linux/kexec.h
@@ -42,6 +42,7 @@
#define KEXEC_ARCH_MIPS_LE (10 << 16)
#define KEXEC_ARCH_MIPS ( 8 << 16)
#define KEXEC_ARCH_AARCH64 (183 << 16)
+#define KEXEC_ARCH_RISCV (243 << 16)
/* The artificial cap on the number of segments passed to kexec_load. */
#define KEXEC_SEGMENT_MAX 16
diff --git a/original/uapi/linux/kfd_ioctl.h b/original/uapi/linux/kfd_ioctl.h
index 695b606..af96af1 100644
--- a/original/uapi/linux/kfd_ioctl.h
+++ b/original/uapi/linux/kfd_ioctl.h
@@ -29,9 +29,12 @@
/*
* - 1.1 - initial version
* - 1.3 - Add SMI events support
+ * - 1.4 - Indicate new SRAM EDC bit in device properties
+ * - 1.5 - Add SVM API
+ * - 1.6 - Query clear flags in SVM get_attr API
*/
#define KFD_IOCTL_MAJOR_VERSION 1
-#define KFD_IOCTL_MINOR_VERSION 3
+#define KFD_IOCTL_MINOR_VERSION 6
struct kfd_ioctl_get_version_args {
__u32 major_version; /* from KFD */
@@ -351,6 +354,7 @@
#define KFD_IOC_ALLOC_MEM_FLAGS_NO_SUBSTITUTE (1 << 28)
#define KFD_IOC_ALLOC_MEM_FLAGS_AQL_QUEUE_MEM (1 << 27)
#define KFD_IOC_ALLOC_MEM_FLAGS_COHERENT (1 << 26)
+#define KFD_IOC_ALLOC_MEM_FLAGS_UNCACHED (1 << 25)
/* Allocate memory for later SVM (shared virtual memory) mapping.
*
@@ -471,6 +475,168 @@
KFD_MMIO_REMAP_HDP_REG_FLUSH_CNTL = 4,
};
+/* Guarantee host access to memory */
+#define KFD_IOCTL_SVM_FLAG_HOST_ACCESS 0x00000001
+/* Fine grained coherency between all devices with access */
+#define KFD_IOCTL_SVM_FLAG_COHERENT 0x00000002
+/* Use any GPU in same hive as preferred device */
+#define KFD_IOCTL_SVM_FLAG_HIVE_LOCAL 0x00000004
+/* GPUs only read, allows replication */
+#define KFD_IOCTL_SVM_FLAG_GPU_RO 0x00000008
+/* Allow execution on GPU */
+#define KFD_IOCTL_SVM_FLAG_GPU_EXEC 0x00000010
+/* GPUs mostly read, may allow similar optimizations as RO, but writes fault */
+#define KFD_IOCTL_SVM_FLAG_GPU_READ_MOSTLY 0x00000020
+
+/**
+ * kfd_ioctl_svm_op - SVM ioctl operations
+ *
+ * @KFD_IOCTL_SVM_OP_SET_ATTR: Modify one or more attributes
+ * @KFD_IOCTL_SVM_OP_GET_ATTR: Query one or more attributes
+ */
+enum kfd_ioctl_svm_op {
+ KFD_IOCTL_SVM_OP_SET_ATTR,
+ KFD_IOCTL_SVM_OP_GET_ATTR
+};
+
+/** kfd_ioctl_svm_location - Enum for preferred and prefetch locations
+ *
+ * GPU IDs are used to specify GPUs as preferred and prefetch locations.
+ * Below definitions are used for system memory or for leaving the preferred
+ * location unspecified.
+ */
+enum kfd_ioctl_svm_location {
+ KFD_IOCTL_SVM_LOCATION_SYSMEM = 0,
+ KFD_IOCTL_SVM_LOCATION_UNDEFINED = 0xffffffff
+};
+
+/**
+ * kfd_ioctl_svm_attr_type - SVM attribute types
+ *
+ * @KFD_IOCTL_SVM_ATTR_PREFERRED_LOC: gpuid of the preferred location, 0 for
+ * system memory
+ * @KFD_IOCTL_SVM_ATTR_PREFETCH_LOC: gpuid of the prefetch location, 0 for
+ * system memory. Setting this triggers an
+ * immediate prefetch (migration).
+ * @KFD_IOCTL_SVM_ATTR_ACCESS:
+ * @KFD_IOCTL_SVM_ATTR_ACCESS_IN_PLACE:
+ * @KFD_IOCTL_SVM_ATTR_NO_ACCESS: specify memory access for the gpuid given
+ * by the attribute value
+ * @KFD_IOCTL_SVM_ATTR_SET_FLAGS: bitmask of flags to set (see
+ * KFD_IOCTL_SVM_FLAG_...)
+ * @KFD_IOCTL_SVM_ATTR_CLR_FLAGS: bitmask of flags to clear
+ * @KFD_IOCTL_SVM_ATTR_GRANULARITY: migration granularity
+ * (log2 num pages)
+ */
+enum kfd_ioctl_svm_attr_type {
+ KFD_IOCTL_SVM_ATTR_PREFERRED_LOC,
+ KFD_IOCTL_SVM_ATTR_PREFETCH_LOC,
+ KFD_IOCTL_SVM_ATTR_ACCESS,
+ KFD_IOCTL_SVM_ATTR_ACCESS_IN_PLACE,
+ KFD_IOCTL_SVM_ATTR_NO_ACCESS,
+ KFD_IOCTL_SVM_ATTR_SET_FLAGS,
+ KFD_IOCTL_SVM_ATTR_CLR_FLAGS,
+ KFD_IOCTL_SVM_ATTR_GRANULARITY
+};
+
+/**
+ * kfd_ioctl_svm_attribute - Attributes as pairs of type and value
+ *
+ * The meaning of the @value depends on the attribute type.
+ *
+ * @type: attribute type (see enum @kfd_ioctl_svm_attr_type)
+ * @value: attribute value
+ */
+struct kfd_ioctl_svm_attribute {
+ __u32 type;
+ __u32 value;
+};
+
+/**
+ * kfd_ioctl_svm_args - Arguments for SVM ioctl
+ *
+ * @op specifies the operation to perform (see enum
+ * @kfd_ioctl_svm_op). @start_addr and @size are common for all
+ * operations.
+ *
+ * A variable number of attributes can be given in @attrs.
+ * @nattr specifies the number of attributes. New attributes can be
+ * added in the future without breaking the ABI. If unknown attributes
+ * are given, the function returns -EINVAL.
+ *
+ * @KFD_IOCTL_SVM_OP_SET_ATTR sets attributes for a virtual address
+ * range. It may overlap existing virtual address ranges. If it does,
+ * the existing ranges will be split such that the attribute changes
+ * only apply to the specified address range.
+ *
+ * @KFD_IOCTL_SVM_OP_GET_ATTR returns the intersection of attributes
+ * over all memory in the given range and returns the result as the
+ * attribute value. If different pages have different preferred or
+ * prefetch locations, 0xffffffff will be returned for
+ * @KFD_IOCTL_SVM_ATTR_PREFERRED_LOC or
+ * @KFD_IOCTL_SVM_ATTR_PREFETCH_LOC resepctively. For
+ * @KFD_IOCTL_SVM_ATTR_SET_FLAGS, flags of all pages will be
+ * aggregated by bitwise AND. That means, a flag will be set in the
+ * output, if that flag is set for all pages in the range. For
+ * @KFD_IOCTL_SVM_ATTR_CLR_FLAGS, flags of all pages will be
+ * aggregated by bitwise NOR. That means, a flag will be set in the
+ * output, if that flag is clear for all pages in the range.
+ * The minimum migration granularity throughout the range will be
+ * returned for @KFD_IOCTL_SVM_ATTR_GRANULARITY.
+ *
+ * Querying of accessibility attributes works by initializing the
+ * attribute type to @KFD_IOCTL_SVM_ATTR_ACCESS and the value to the
+ * GPUID being queried. Multiple attributes can be given to allow
+ * querying multiple GPUIDs. The ioctl function overwrites the
+ * attribute type to indicate the access for the specified GPU.
+ */
+struct kfd_ioctl_svm_args {
+ __u64 start_addr;
+ __u64 size;
+ __u32 op;
+ __u32 nattr;
+ /* Variable length array of attributes */
+ struct kfd_ioctl_svm_attribute attrs[0];
+};
+
+/**
+ * kfd_ioctl_set_xnack_mode_args - Arguments for set_xnack_mode
+ *
+ * @xnack_enabled: [in/out] Whether to enable XNACK mode for this process
+ *
+ * @xnack_enabled indicates whether recoverable page faults should be
+ * enabled for the current process. 0 means disabled, positive means
+ * enabled, negative means leave unchanged. If enabled, virtual address
+ * translations on GFXv9 and later AMD GPUs can return XNACK and retry
+ * the access until a valid PTE is available. This is used to implement
+ * device page faults.
+ *
+ * On output, @xnack_enabled returns the (new) current mode (0 or
+ * positive). Therefore, a negative input value can be used to query
+ * the current mode without changing it.
+ *
+ * The XNACK mode fundamentally changes the way SVM managed memory works
+ * in the driver, with subtle effects on application performance and
+ * functionality.
+ *
+ * Enabling XNACK mode requires shader programs to be compiled
+ * differently. Furthermore, not all GPUs support changing the mode
+ * per-process. Therefore changing the mode is only allowed while no
+ * user mode queues exist in the process. This ensure that no shader
+ * code is running that may be compiled for the wrong mode. And GPUs
+ * that cannot change to the requested mode will prevent the XNACK
+ * mode from occurring. All GPUs used by the process must be in the
+ * same XNACK mode.
+ *
+ * GFXv8 or older GPUs do not support 48 bit virtual addresses or SVM.
+ * Therefore those GPUs are not considered for the XNACK mode switch.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+struct kfd_ioctl_set_xnack_mode_args {
+ __s32 xnack_enabled;
+};
+
#define AMDKFD_IOCTL_BASE 'K'
#define AMDKFD_IO(nr) _IO(AMDKFD_IOCTL_BASE, nr)
#define AMDKFD_IOR(nr, type) _IOR(AMDKFD_IOCTL_BASE, nr, type)
@@ -571,7 +737,12 @@
#define AMDKFD_IOC_SMI_EVENTS \
AMDKFD_IOWR(0x1F, struct kfd_ioctl_smi_events_args)
+#define AMDKFD_IOC_SVM AMDKFD_IOWR(0x20, struct kfd_ioctl_svm_args)
+
+#define AMDKFD_IOC_SET_XNACK_MODE \
+ AMDKFD_IOWR(0x21, struct kfd_ioctl_set_xnack_mode_args)
+
#define AMDKFD_COMMAND_START 0x01
-#define AMDKFD_COMMAND_END 0x20
+#define AMDKFD_COMMAND_END 0x22
#endif
diff --git a/original/uapi/linux/kfd_sysfs.h b/original/uapi/linux/kfd_sysfs.h
new file mode 100644
index 0000000..3e330f3
--- /dev/null
+++ b/original/uapi/linux/kfd_sysfs.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */
+/*
+ * Copyright 2021 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef KFD_SYSFS_H_INCLUDED
+#define KFD_SYSFS_H_INCLUDED
+
+/* Capability bits in node properties */
+#define HSA_CAP_HOT_PLUGGABLE 0x00000001
+#define HSA_CAP_ATS_PRESENT 0x00000002
+#define HSA_CAP_SHARED_WITH_GRAPHICS 0x00000004
+#define HSA_CAP_QUEUE_SIZE_POW2 0x00000008
+#define HSA_CAP_QUEUE_SIZE_32BIT 0x00000010
+#define HSA_CAP_QUEUE_IDLE_EVENT 0x00000020
+#define HSA_CAP_VA_LIMIT 0x00000040
+#define HSA_CAP_WATCH_POINTS_SUPPORTED 0x00000080
+#define HSA_CAP_WATCH_POINTS_TOTALBITS_MASK 0x00000f00
+#define HSA_CAP_WATCH_POINTS_TOTALBITS_SHIFT 8
+#define HSA_CAP_DOORBELL_TYPE_TOTALBITS_MASK 0x00003000
+#define HSA_CAP_DOORBELL_TYPE_TOTALBITS_SHIFT 12
+
+#define HSA_CAP_DOORBELL_TYPE_PRE_1_0 0x0
+#define HSA_CAP_DOORBELL_TYPE_1_0 0x1
+#define HSA_CAP_DOORBELL_TYPE_2_0 0x2
+#define HSA_CAP_AQL_QUEUE_DOUBLE_MAP 0x00004000
+
+/* Old buggy user mode depends on this being 0 */
+#define HSA_CAP_RESERVED_WAS_SRAM_EDCSUPPORTED 0x00080000
+
+#define HSA_CAP_MEM_EDCSUPPORTED 0x00100000
+#define HSA_CAP_RASEVENTNOTIFY 0x00200000
+#define HSA_CAP_ASIC_REVISION_MASK 0x03c00000
+#define HSA_CAP_ASIC_REVISION_SHIFT 22
+#define HSA_CAP_SRAM_EDCSUPPORTED 0x04000000
+#define HSA_CAP_SVMAPI_SUPPORTED 0x08000000
+#define HSA_CAP_FLAGS_COHERENTHOSTACCESS 0x10000000
+#define HSA_CAP_RESERVED 0xe00f8000
+
+/* Heap types in memory properties */
+#define HSA_MEM_HEAP_TYPE_SYSTEM 0
+#define HSA_MEM_HEAP_TYPE_FB_PUBLIC 1
+#define HSA_MEM_HEAP_TYPE_FB_PRIVATE 2
+#define HSA_MEM_HEAP_TYPE_GPU_GDS 3
+#define HSA_MEM_HEAP_TYPE_GPU_LDS 4
+#define HSA_MEM_HEAP_TYPE_GPU_SCRATCH 5
+
+/* Flag bits in memory properties */
+#define HSA_MEM_FLAGS_HOT_PLUGGABLE 0x00000001
+#define HSA_MEM_FLAGS_NON_VOLATILE 0x00000002
+#define HSA_MEM_FLAGS_RESERVED 0xfffffffc
+
+/* Cache types in cache properties */
+#define HSA_CACHE_TYPE_DATA 0x00000001
+#define HSA_CACHE_TYPE_INSTRUCTION 0x00000002
+#define HSA_CACHE_TYPE_CPU 0x00000004
+#define HSA_CACHE_TYPE_HSACU 0x00000008
+#define HSA_CACHE_TYPE_RESERVED 0xfffffff0
+
+/* Link types in IO link properties (matches CRAT link types) */
+#define HSA_IOLINK_TYPE_UNDEFINED 0
+#define HSA_IOLINK_TYPE_HYPERTRANSPORT 1
+#define HSA_IOLINK_TYPE_PCIEXPRESS 2
+#define HSA_IOLINK_TYPE_AMBA 3
+#define HSA_IOLINK_TYPE_MIPI 4
+#define HSA_IOLINK_TYPE_QPI_1_1 5
+#define HSA_IOLINK_TYPE_RESERVED1 6
+#define HSA_IOLINK_TYPE_RESERVED2 7
+#define HSA_IOLINK_TYPE_RAPID_IO 8
+#define HSA_IOLINK_TYPE_INFINIBAND 9
+#define HSA_IOLINK_TYPE_RESERVED3 10
+#define HSA_IOLINK_TYPE_XGMI 11
+#define HSA_IOLINK_TYPE_XGOP 12
+#define HSA_IOLINK_TYPE_GZ 13
+#define HSA_IOLINK_TYPE_ETHERNET_RDMA 14
+#define HSA_IOLINK_TYPE_RDMA_OTHER 15
+#define HSA_IOLINK_TYPE_OTHER 16
+
+/* Flag bits in IO link properties (matches CRAT flags, excluding the
+ * bi-directional flag, which is not offially part of the CRAT spec, and
+ * only used internally in KFD)
+ */
+#define HSA_IOLINK_FLAGS_ENABLED (1 << 0)
+#define HSA_IOLINK_FLAGS_NON_COHERENT (1 << 1)
+#define HSA_IOLINK_FLAGS_NO_ATOMICS_32_BIT (1 << 2)
+#define HSA_IOLINK_FLAGS_NO_ATOMICS_64_BIT (1 << 3)
+#define HSA_IOLINK_FLAGS_NO_PEER_TO_PEER_DMA (1 << 4)
+#define HSA_IOLINK_FLAGS_RESERVED 0xffffffe0
+
+#endif
diff --git a/original/uapi/linux/kvm.h b/original/uapi/linux/kvm.h
index f6afee2..507ee1f 100644
--- a/original/uapi/linux/kvm.h
+++ b/original/uapi/linux/kvm.h
@@ -8,6 +8,7 @@
* Note: you must update KVM_API_VERSION if you change this interface.
*/
+#include <linux/const.h>
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/ioctl.h>
@@ -268,6 +269,7 @@
#define KVM_EXIT_AP_RESET_HOLD 32
#define KVM_EXIT_X86_BUS_LOCK 33
#define KVM_EXIT_XEN 34
+#define KVM_EXIT_RISCV_SBI 35
/* For KVM_EXIT_INTERNAL_ERROR */
/* Emulate instruction failed. */
@@ -279,6 +281,9 @@
/* Encounter unexpected vm-exit reason */
#define KVM_INTERNAL_ERROR_UNEXPECTED_EXIT_REASON 4
+/* Flags that describe what fields in emulation_failure hold valid data. */
+#define KVM_INTERNAL_ERROR_EMULATION_FLAG_INSTRUCTION_BYTES (1ULL << 0)
+
/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
struct kvm_run {
/* in */
@@ -382,6 +387,35 @@
__u32 ndata;
__u64 data[16];
} internal;
+ /*
+ * KVM_INTERNAL_ERROR_EMULATION
+ *
+ * "struct emulation_failure" is an overlay of "struct internal"
+ * that is used for the KVM_INTERNAL_ERROR_EMULATION sub-type of
+ * KVM_EXIT_INTERNAL_ERROR. Note, unlike other internal error
+ * sub-types, this struct is ABI! It also needs to be backwards
+ * compatible with "struct internal". Take special care that
+ * "ndata" is correct, that new fields are enumerated in "flags",
+ * and that each flag enumerates fields that are 64-bit aligned
+ * and sized (so that ndata+internal.data[] is valid/accurate).
+ *
+ * Space beyond the defined fields may be used to store arbitrary
+ * debug information relating to the emulation failure. It is
+ * accounted for in "ndata" but the format is unspecified and is
+ * not represented in "flags". Any such information is *not* ABI!
+ */
+ struct {
+ __u32 suberror;
+ __u32 ndata;
+ __u64 flags;
+ union {
+ struct {
+ __u8 insn_size;
+ __u8 insn_bytes[15];
+ };
+ };
+ /* Arbitrary debug data may follow. */
+ } emulation_failure;
/* KVM_EXIT_OSI */
struct {
__u64 gprs[32];
@@ -446,6 +480,13 @@
} msr;
/* KVM_EXIT_XEN */
struct kvm_xen_exit xen;
+ /* KVM_EXIT_RISCV_SBI */
+ struct {
+ unsigned long extension_id;
+ unsigned long function_id;
+ unsigned long args[6];
+ unsigned long ret[2];
+ } riscv_sbi;
/* Fix the size of the union. */
char padding[256];
};
@@ -1078,6 +1119,22 @@
#define KVM_CAP_DIRTY_LOG_RING 192
#define KVM_CAP_X86_BUS_LOCK_EXIT 193
#define KVM_CAP_PPC_DAWR1 194
+#define KVM_CAP_SET_GUEST_DEBUG2 195
+#define KVM_CAP_SGX_ATTRIBUTE 196
+#define KVM_CAP_VM_COPY_ENC_CONTEXT_FROM 197
+#define KVM_CAP_PTP_KVM 198
+#define KVM_CAP_HYPERV_ENFORCE_CPUID 199
+#define KVM_CAP_SREGS2 200
+#define KVM_CAP_EXIT_HYPERCALL 201
+#define KVM_CAP_PPC_RPT_INVALIDATE 202
+#define KVM_CAP_BINARY_STATS_FD 203
+#define KVM_CAP_EXIT_ON_EMULATION_FAILURE 204
+#define KVM_CAP_ARM_MTE 205
+#define KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM 206
+#define KVM_CAP_VM_GPA_BITS 207
+#define KVM_CAP_XSAVE2 208
+#define KVM_CAP_SYS_ATTRIBUTES 209
+#define KVM_CAP_PPC_AIL_MODE_3 210
#ifdef KVM_CAP_IRQ_ROUTING
@@ -1109,11 +1166,20 @@
__u32 sint;
};
+struct kvm_irq_routing_xen_evtchn {
+ __u32 port;
+ __u32 vcpu;
+ __u32 priority;
+};
+
+#define KVM_IRQ_ROUTING_XEN_EVTCHN_PRIO_2LEVEL ((__u32)(-1))
+
/* gsi routing entry types */
#define KVM_IRQ_ROUTING_IRQCHIP 1
#define KVM_IRQ_ROUTING_MSI 2
#define KVM_IRQ_ROUTING_S390_ADAPTER 3
#define KVM_IRQ_ROUTING_HV_SINT 4
+#define KVM_IRQ_ROUTING_XEN_EVTCHN 5
struct kvm_irq_routing_entry {
__u32 gsi;
@@ -1125,6 +1191,7 @@
struct kvm_irq_routing_msi msi;
struct kvm_irq_routing_s390_adapter adapter;
struct kvm_irq_routing_hv_sint hv_sint;
+ struct kvm_irq_routing_xen_evtchn xen_evtchn;
__u32 pad[8];
} u;
};
@@ -1155,6 +1222,7 @@
#define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL (1 << 1)
#define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2)
#define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3)
+#define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4)
struct kvm_xen_hvm_config {
__u32 flags;
@@ -1189,11 +1257,16 @@
/* Do not use 1, KVM_CHECK_EXTENSION returned it before we had flags. */
#define KVM_CLOCK_TSC_STABLE 2
+#define KVM_CLOCK_REALTIME (1 << 2)
+#define KVM_CLOCK_HOST_TSC (1 << 3)
struct kvm_clock_data {
__u64 clock;
__u32 flags;
- __u32 pad[9];
+ __u32 pad0;
+ __u64 realtime;
+ __u64 host_tsc;
+ __u32 pad[4];
};
/* For KVM_CAP_SW_TLB */
@@ -1423,6 +1496,7 @@
/* Available with KVM_CAP_PMU_EVENT_FILTER */
#define KVM_SET_PMU_EVENT_FILTER _IOW(KVMIO, 0xb2, struct kvm_pmu_event_filter)
#define KVM_PPC_SVM_OFF _IO(KVMIO, 0xb3)
+#define KVM_ARM_MTE_COPY_TAGS _IOR(KVMIO, 0xb4, struct kvm_arm_copy_mte_tags)
/* ioctl for vm fd */
#define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device)
@@ -1616,6 +1690,9 @@
#define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr)
#define KVM_XEN_VCPU_SET_ATTR _IOW(KVMIO, 0xcb, struct kvm_xen_vcpu_attr)
+#define KVM_GET_SREGS2 _IOR(KVMIO, 0xcc, struct kvm_sregs2)
+#define KVM_SET_SREGS2 _IOW(KVMIO, 0xcd, struct kvm_sregs2)
+
struct kvm_xen_vcpu_attr {
__u16 type;
__u16 pad[3];
@@ -1671,6 +1748,8 @@
KVM_SEV_CERT_EXPORT,
/* Attestation report */
KVM_SEV_GET_ATTESTATION_REPORT,
+ /* Guest Migration Extension */
+ KVM_SEV_SEND_CANCEL,
KVM_SEV_NR_MAX,
};
@@ -1729,6 +1808,45 @@
__u32 len;
};
+struct kvm_sev_send_start {
+ __u32 policy;
+ __u64 pdh_cert_uaddr;
+ __u32 pdh_cert_len;
+ __u64 plat_certs_uaddr;
+ __u32 plat_certs_len;
+ __u64 amd_certs_uaddr;
+ __u32 amd_certs_len;
+ __u64 session_uaddr;
+ __u32 session_len;
+};
+
+struct kvm_sev_send_update_data {
+ __u64 hdr_uaddr;
+ __u32 hdr_len;
+ __u64 guest_uaddr;
+ __u32 guest_len;
+ __u64 trans_uaddr;
+ __u32 trans_len;
+};
+
+struct kvm_sev_receive_start {
+ __u32 handle;
+ __u32 policy;
+ __u64 pdh_uaddr;
+ __u32 pdh_len;
+ __u64 session_uaddr;
+ __u32 session_len;
+};
+
+struct kvm_sev_receive_update_data {
+ __u64 hdr_uaddr;
+ __u32 hdr_len;
+ __u64 guest_uaddr;
+ __u32 guest_len;
+ __u64 trans_uaddr;
+ __u32 trans_len;
+};
+
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2)
@@ -1834,8 +1952,8 @@
* conversion after harvesting an entry. Also, it must not skip any
* dirty bits, so that dirty bits are always harvested in sequence.
*/
-#define KVM_DIRTY_GFN_F_DIRTY BIT(0)
-#define KVM_DIRTY_GFN_F_RESET BIT(1)
+#define KVM_DIRTY_GFN_F_DIRTY _BITUL(0)
+#define KVM_DIRTY_GFN_F_RESET _BITUL(1)
#define KVM_DIRTY_GFN_F_MASK 0x3
/*
@@ -1853,4 +1971,82 @@
#define KVM_BUS_LOCK_DETECTION_OFF (1 << 0)
#define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1)
+/**
+ * struct kvm_stats_header - Header of per vm/vcpu binary statistics data.
+ * @flags: Some extra information for header, always 0 for now.
+ * @name_size: The size in bytes of the memory which contains statistics
+ * name string including trailing '\0'. The memory is allocated
+ * at the send of statistics descriptor.
+ * @num_desc: The number of statistics the vm or vcpu has.
+ * @id_offset: The offset of the vm/vcpu stats' id string in the file pointed
+ * by vm/vcpu stats fd.
+ * @desc_offset: The offset of the vm/vcpu stats' descriptor block in the file
+ * pointd by vm/vcpu stats fd.
+ * @data_offset: The offset of the vm/vcpu stats' data block in the file
+ * pointed by vm/vcpu stats fd.
+ *
+ * This is the header userspace needs to read from stats fd before any other
+ * readings. It is used by userspace to discover all the information about the
+ * vm/vcpu's binary statistics.
+ * Userspace reads this header from the start of the vm/vcpu's stats fd.
+ */
+struct kvm_stats_header {
+ __u32 flags;
+ __u32 name_size;
+ __u32 num_desc;
+ __u32 id_offset;
+ __u32 desc_offset;
+ __u32 data_offset;
+};
+
+#define KVM_STATS_TYPE_SHIFT 0
+#define KVM_STATS_TYPE_MASK (0xF << KVM_STATS_TYPE_SHIFT)
+#define KVM_STATS_TYPE_CUMULATIVE (0x0 << KVM_STATS_TYPE_SHIFT)
+#define KVM_STATS_TYPE_INSTANT (0x1 << KVM_STATS_TYPE_SHIFT)
+#define KVM_STATS_TYPE_PEAK (0x2 << KVM_STATS_TYPE_SHIFT)
+#define KVM_STATS_TYPE_LINEAR_HIST (0x3 << KVM_STATS_TYPE_SHIFT)
+#define KVM_STATS_TYPE_LOG_HIST (0x4 << KVM_STATS_TYPE_SHIFT)
+#define KVM_STATS_TYPE_MAX KVM_STATS_TYPE_LOG_HIST
+
+#define KVM_STATS_UNIT_SHIFT 4
+#define KVM_STATS_UNIT_MASK (0xF << KVM_STATS_UNIT_SHIFT)
+#define KVM_STATS_UNIT_NONE (0x0 << KVM_STATS_UNIT_SHIFT)
+#define KVM_STATS_UNIT_BYTES (0x1 << KVM_STATS_UNIT_SHIFT)
+#define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT)
+#define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT)
+#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_CYCLES
+
+#define KVM_STATS_BASE_SHIFT 8
+#define KVM_STATS_BASE_MASK (0xF << KVM_STATS_BASE_SHIFT)
+#define KVM_STATS_BASE_POW10 (0x0 << KVM_STATS_BASE_SHIFT)
+#define KVM_STATS_BASE_POW2 (0x1 << KVM_STATS_BASE_SHIFT)
+#define KVM_STATS_BASE_MAX KVM_STATS_BASE_POW2
+
+/**
+ * struct kvm_stats_desc - Descriptor of a KVM statistics.
+ * @flags: Annotations of the stats, like type, unit, etc.
+ * @exponent: Used together with @flags to determine the unit.
+ * @size: The number of data items for this stats.
+ * Every data item is of type __u64.
+ * @offset: The offset of the stats to the start of stat structure in
+ * structure kvm or kvm_vcpu.
+ * @bucket_size: A parameter value used for histogram stats. It is only used
+ * for linear histogram stats, specifying the size of the bucket;
+ * @name: The name string for the stats. Its size is indicated by the
+ * &kvm_stats_header->name_size.
+ */
+struct kvm_stats_desc {
+ __u32 flags;
+ __s16 exponent;
+ __u16 size;
+ __u32 offset;
+ __u32 bucket_size;
+ char name[];
+};
+
+#define KVM_GET_STATS_FD _IO(KVMIO, 0xce)
+
+/* Available with KVM_CAP_XSAVE2 */
+#define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave)
+
#endif /* __LINUX_KVM_H */
diff --git a/original/uapi/linux/kvm_para.h b/original/uapi/linux/kvm_para.h
index 8b86609..960c7e9 100644
--- a/original/uapi/linux/kvm_para.h
+++ b/original/uapi/linux/kvm_para.h
@@ -29,6 +29,7 @@
#define KVM_HC_CLOCK_PAIRING 9
#define KVM_HC_SEND_IPI 10
#define KVM_HC_SCHED_YIELD 11
+#define KVM_HC_MAP_GPA_RANGE 12
/*
* hypercalls use architecture specific
diff --git a/original/uapi/linux/landlock.h b/original/uapi/linux/landlock.h
new file mode 100644
index 0000000..b3d9520
--- /dev/null
+++ b/original/uapi/linux/landlock.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Landlock - User space API
+ *
+ * Copyright © 2017-2020 Mickaël Salaün <mic@digikod.net>
+ * Copyright © 2018-2020 ANSSI
+ */
+
+#ifndef _UAPI_LINUX_LANDLOCK_H
+#define _UAPI_LINUX_LANDLOCK_H
+
+#include <linux/types.h>
+
+/**
+ * struct landlock_ruleset_attr - Ruleset definition
+ *
+ * Argument of sys_landlock_create_ruleset(). This structure can grow in
+ * future versions.
+ */
+struct landlock_ruleset_attr {
+ /**
+ * @handled_access_fs: Bitmask of actions (cf. `Filesystem flags`_)
+ * that is handled by this ruleset and should then be forbidden if no
+ * rule explicitly allow them. This is needed for backward
+ * compatibility reasons.
+ */
+ __u64 handled_access_fs;
+};
+
+/*
+ * sys_landlock_create_ruleset() flags:
+ *
+ * - %LANDLOCK_CREATE_RULESET_VERSION: Get the highest supported Landlock ABI
+ * version.
+ */
+#define LANDLOCK_CREATE_RULESET_VERSION (1U << 0)
+
+/**
+ * enum landlock_rule_type - Landlock rule type
+ *
+ * Argument of sys_landlock_add_rule().
+ */
+enum landlock_rule_type {
+ /**
+ * @LANDLOCK_RULE_PATH_BENEATH: Type of a &struct
+ * landlock_path_beneath_attr .
+ */
+ LANDLOCK_RULE_PATH_BENEATH = 1,
+};
+
+/**
+ * struct landlock_path_beneath_attr - Path hierarchy definition
+ *
+ * Argument of sys_landlock_add_rule().
+ */
+struct landlock_path_beneath_attr {
+ /**
+ * @allowed_access: Bitmask of allowed actions for this file hierarchy
+ * (cf. `Filesystem flags`_).
+ */
+ __u64 allowed_access;
+ /**
+ * @parent_fd: File descriptor, open with ``O_PATH``, which identifies
+ * the parent directory of a file hierarchy, or just a file.
+ */
+ __s32 parent_fd;
+ /*
+ * This struct is packed to avoid trailing reserved members.
+ * Cf. security/landlock/syscalls.c:build_check_abi()
+ */
+} __attribute__((packed));
+
+/**
+ * DOC: fs_access
+ *
+ * A set of actions on kernel objects may be defined by an attribute (e.g.
+ * &struct landlock_path_beneath_attr) including a bitmask of access.
+ *
+ * Filesystem flags
+ * ~~~~~~~~~~~~~~~~
+ *
+ * These flags enable to restrict a sandboxed process to a set of actions on
+ * files and directories. Files or directories opened before the sandboxing
+ * are not subject to these restrictions.
+ *
+ * A file can only receive these access rights:
+ *
+ * - %LANDLOCK_ACCESS_FS_EXECUTE: Execute a file.
+ * - %LANDLOCK_ACCESS_FS_WRITE_FILE: Open a file with write access.
+ * - %LANDLOCK_ACCESS_FS_READ_FILE: Open a file with read access.
+ *
+ * A directory can receive access rights related to files or directories. The
+ * following access right is applied to the directory itself, and the
+ * directories beneath it:
+ *
+ * - %LANDLOCK_ACCESS_FS_READ_DIR: Open a directory or list its content.
+ *
+ * However, the following access rights only apply to the content of a
+ * directory, not the directory itself:
+ *
+ * - %LANDLOCK_ACCESS_FS_REMOVE_DIR: Remove an empty directory or rename one.
+ * - %LANDLOCK_ACCESS_FS_REMOVE_FILE: Unlink (or rename) a file.
+ * - %LANDLOCK_ACCESS_FS_MAKE_CHAR: Create (or rename or link) a character
+ * device.
+ * - %LANDLOCK_ACCESS_FS_MAKE_DIR: Create (or rename) a directory.
+ * - %LANDLOCK_ACCESS_FS_MAKE_REG: Create (or rename or link) a regular file.
+ * - %LANDLOCK_ACCESS_FS_MAKE_SOCK: Create (or rename or link) a UNIX domain
+ * socket.
+ * - %LANDLOCK_ACCESS_FS_MAKE_FIFO: Create (or rename or link) a named pipe.
+ * - %LANDLOCK_ACCESS_FS_MAKE_BLOCK: Create (or rename or link) a block device.
+ * - %LANDLOCK_ACCESS_FS_MAKE_SYM: Create (or rename or link) a symbolic link.
+ *
+ * .. warning::
+ *
+ * It is currently not possible to restrict some file-related actions
+ * accessible through these syscall families: :manpage:`chdir(2)`,
+ * :manpage:`truncate(2)`, :manpage:`stat(2)`, :manpage:`flock(2)`,
+ * :manpage:`chmod(2)`, :manpage:`chown(2)`, :manpage:`setxattr(2)`,
+ * :manpage:`utime(2)`, :manpage:`ioctl(2)`, :manpage:`fcntl(2)`,
+ * :manpage:`access(2)`.
+ * Future Landlock evolutions will enable to restrict them.
+ */
+#define LANDLOCK_ACCESS_FS_EXECUTE (1ULL << 0)
+#define LANDLOCK_ACCESS_FS_WRITE_FILE (1ULL << 1)
+#define LANDLOCK_ACCESS_FS_READ_FILE (1ULL << 2)
+#define LANDLOCK_ACCESS_FS_READ_DIR (1ULL << 3)
+#define LANDLOCK_ACCESS_FS_REMOVE_DIR (1ULL << 4)
+#define LANDLOCK_ACCESS_FS_REMOVE_FILE (1ULL << 5)
+#define LANDLOCK_ACCESS_FS_MAKE_CHAR (1ULL << 6)
+#define LANDLOCK_ACCESS_FS_MAKE_DIR (1ULL << 7)
+#define LANDLOCK_ACCESS_FS_MAKE_REG (1ULL << 8)
+#define LANDLOCK_ACCESS_FS_MAKE_SOCK (1ULL << 9)
+#define LANDLOCK_ACCESS_FS_MAKE_FIFO (1ULL << 10)
+#define LANDLOCK_ACCESS_FS_MAKE_BLOCK (1ULL << 11)
+#define LANDLOCK_ACCESS_FS_MAKE_SYM (1ULL << 12)
+
+#endif /* _UAPI_LINUX_LANDLOCK_H */
diff --git a/original/uapi/linux/lightnvm.h b/original/uapi/linux/lightnvm.h
deleted file mode 100644
index ead2e72..0000000
--- a/original/uapi/linux/lightnvm.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * Copyright (C) 2015 CNEX Labs. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
- * USA.
- */
-
-#ifndef _UAPI_LINUX_LIGHTNVM_H
-#define _UAPI_LINUX_LIGHTNVM_H
-
-#ifdef __KERNEL__
-#include <linux/const.h>
-#include <linux/ioctl.h>
-#else /* __KERNEL__ */
-#include <stdio.h>
-#include <sys/ioctl.h>
-#define DISK_NAME_LEN 32
-#endif /* __KERNEL__ */
-
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define NVM_TTYPE_NAME_MAX 48
-#define NVM_TTYPE_MAX 63
-#define NVM_MMTYPE_LEN 8
-
-#define NVM_CTRL_FILE "/dev/lightnvm/control"
-
-struct nvm_ioctl_info_tgt {
- __u32 version[3];
- __u32 reserved;
- char tgtname[NVM_TTYPE_NAME_MAX];
-};
-
-struct nvm_ioctl_info {
- __u32 version[3]; /* in/out - major, minor, patch */
- __u16 tgtsize; /* number of targets */
- __u16 reserved16; /* pad to 4K page */
- __u32 reserved[12];
- struct nvm_ioctl_info_tgt tgts[NVM_TTYPE_MAX];
-};
-
-enum {
- NVM_DEVICE_ACTIVE = 1 << 0,
-};
-
-struct nvm_ioctl_device_info {
- char devname[DISK_NAME_LEN];
- char bmname[NVM_TTYPE_NAME_MAX];
- __u32 bmversion[3];
- __u32 flags;
- __u32 reserved[8];
-};
-
-struct nvm_ioctl_get_devices {
- __u32 nr_devices;
- __u32 reserved[31];
- struct nvm_ioctl_device_info info[31];
-};
-
-struct nvm_ioctl_create_simple {
- __u32 lun_begin;
- __u32 lun_end;
-};
-
-struct nvm_ioctl_create_extended {
- __u16 lun_begin;
- __u16 lun_end;
- __u16 op;
- __u16 rsv;
-};
-
-enum {
- NVM_CONFIG_TYPE_SIMPLE = 0,
- NVM_CONFIG_TYPE_EXTENDED = 1,
-};
-
-struct nvm_ioctl_create_conf {
- __u32 type;
- union {
- struct nvm_ioctl_create_simple s;
- struct nvm_ioctl_create_extended e;
- };
-};
-
-enum {
- NVM_TARGET_FACTORY = 1 << 0, /* Init target in factory mode */
-};
-
-struct nvm_ioctl_create {
- char dev[DISK_NAME_LEN]; /* open-channel SSD device */
- char tgttype[NVM_TTYPE_NAME_MAX]; /* target type name */
- char tgtname[DISK_NAME_LEN]; /* dev to expose target as */
-
- __u32 flags;
-
- struct nvm_ioctl_create_conf conf;
-};
-
-struct nvm_ioctl_remove {
- char tgtname[DISK_NAME_LEN];
-
- __u32 flags;
-};
-
-struct nvm_ioctl_dev_init {
- char dev[DISK_NAME_LEN]; /* open-channel SSD device */
- char mmtype[NVM_MMTYPE_LEN]; /* register to media manager */
-
- __u32 flags;
-};
-
-enum {
- NVM_FACTORY_ERASE_ONLY_USER = 1 << 0, /* erase only blocks used as
- * host blks or grown blks */
- NVM_FACTORY_RESET_HOST_BLKS = 1 << 1, /* remove host blk marks */
- NVM_FACTORY_RESET_GRWN_BBLKS = 1 << 2, /* remove grown blk marks */
- NVM_FACTORY_NR_BITS = 1 << 3, /* stops here */
-};
-
-struct nvm_ioctl_dev_factory {
- char dev[DISK_NAME_LEN];
-
- __u32 flags;
-};
-
-struct nvm_user_vio {
- __u8 opcode;
- __u8 flags;
- __u16 control;
- __u16 nppas;
- __u16 rsvd;
- __u64 metadata;
- __u64 addr;
- __u64 ppa_list;
- __u32 metadata_len;
- __u32 data_len;
- __u64 status;
- __u32 result;
- __u32 rsvd3[3];
-};
-
-struct nvm_passthru_vio {
- __u8 opcode;
- __u8 flags;
- __u8 rsvd[2];
- __u32 nsid;
- __u32 cdw2;
- __u32 cdw3;
- __u64 metadata;
- __u64 addr;
- __u32 metadata_len;
- __u32 data_len;
- __u64 ppa_list;
- __u16 nppas;
- __u16 control;
- __u32 cdw13;
- __u32 cdw14;
- __u32 cdw15;
- __u64 status;
- __u32 result;
- __u32 timeout_ms;
-};
-
-/* The ioctl type, 'L', 0x20 - 0x2F documented in ioctl-number.txt */
-enum {
- /* top level cmds */
- NVM_INFO_CMD = 0x20,
- NVM_GET_DEVICES_CMD,
-
- /* device level cmds */
- NVM_DEV_CREATE_CMD,
- NVM_DEV_REMOVE_CMD,
-
- /* Init a device to support LightNVM media managers */
- NVM_DEV_INIT_CMD,
-
- /* Factory reset device */
- NVM_DEV_FACTORY_CMD,
-
- /* Vector user I/O */
- NVM_DEV_VIO_ADMIN_CMD = 0x41,
- NVM_DEV_VIO_CMD = 0x42,
- NVM_DEV_VIO_USER_CMD = 0x43,
-};
-
-#define NVM_IOCTL 'L' /* 0x4c */
-
-#define NVM_INFO _IOWR(NVM_IOCTL, NVM_INFO_CMD, \
- struct nvm_ioctl_info)
-#define NVM_GET_DEVICES _IOR(NVM_IOCTL, NVM_GET_DEVICES_CMD, \
- struct nvm_ioctl_get_devices)
-#define NVM_DEV_CREATE _IOW(NVM_IOCTL, NVM_DEV_CREATE_CMD, \
- struct nvm_ioctl_create)
-#define NVM_DEV_REMOVE _IOW(NVM_IOCTL, NVM_DEV_REMOVE_CMD, \
- struct nvm_ioctl_remove)
-#define NVM_DEV_INIT _IOW(NVM_IOCTL, NVM_DEV_INIT_CMD, \
- struct nvm_ioctl_dev_init)
-#define NVM_DEV_FACTORY _IOW(NVM_IOCTL, NVM_DEV_FACTORY_CMD, \
- struct nvm_ioctl_dev_factory)
-
-#define NVME_NVM_IOCTL_IO_VIO _IOWR(NVM_IOCTL, NVM_DEV_VIO_USER_CMD, \
- struct nvm_passthru_vio)
-#define NVME_NVM_IOCTL_ADMIN_VIO _IOWR(NVM_IOCTL, NVM_DEV_VIO_ADMIN_CMD,\
- struct nvm_passthru_vio)
-#define NVME_NVM_IOCTL_SUBMIT_VIO _IOWR(NVM_IOCTL, NVM_DEV_VIO_CMD,\
- struct nvm_user_vio)
-
-#define NVM_VERSION_MAJOR 1
-#define NVM_VERSION_MINOR 0
-#define NVM_VERSION_PATCHLEVEL 0
-
-#endif
diff --git a/original/uapi/linux/lirc.h b/original/uapi/linux/lirc.h
index c45a4ea..9919f20 100644
--- a/original/uapi/linux/lirc.h
+++ b/original/uapi/linux/lirc.h
@@ -1,7 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* lirc.h - linux infrared remote control header file
- * last modified 2010/07/13 by Jarod Wilson
*/
#ifndef _LINUX_LIRC_H
diff --git a/original/uapi/linux/lwtunnel.h b/original/uapi/linux/lwtunnel.h
index 568a430..2e20691 100644
--- a/original/uapi/linux/lwtunnel.h
+++ b/original/uapi/linux/lwtunnel.h
@@ -14,6 +14,7 @@
LWTUNNEL_ENCAP_BPF,
LWTUNNEL_ENCAP_SEG6_LOCAL,
LWTUNNEL_ENCAP_RPL,
+ LWTUNNEL_ENCAP_IOAM6,
__LWTUNNEL_ENCAP_MAX,
};
diff --git a/original/uapi/linux/magic.h b/original/uapi/linux/magic.h
index f3956fc..f724129 100644
--- a/original/uapi/linux/magic.h
+++ b/original/uapi/linux/magic.h
@@ -6,6 +6,7 @@
#define AFFS_SUPER_MAGIC 0xadff
#define AFS_SUPER_MAGIC 0x5346414F
#define AUTOFS_SUPER_MAGIC 0x0187
+#define CEPH_SUPER_MAGIC 0x00c36400
#define CODA_SUPER_MAGIC 0x73757245
#define CRAMFS_MAGIC 0x28cd3d45 /* some random number */
#define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */
@@ -35,6 +36,7 @@
#define EFIVARFS_MAGIC 0xde5e81e4
#define HOSTFS_SUPER_MAGIC 0x00c0ffee
#define OVERLAYFS_SUPER_MAGIC 0x794c7630
+#define FUSE_SUPER_MAGIC 0x65735546
#define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */
#define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */
@@ -43,6 +45,7 @@
#define MINIX3_SUPER_MAGIC 0x4d5a /* minix v3 fs, 60 char names */
#define MSDOS_SUPER_MAGIC 0x4d44 /* MD */
+#define EXFAT_SUPER_MAGIC 0x2011BAB0
#define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */
#define NFS_SUPER_MAGIC 0x6969
#define OCFS2_SUPER_MAGIC 0x7461636f
@@ -51,6 +54,7 @@
#define QNX6_SUPER_MAGIC 0x68191122 /* qnx6 fs detection */
#define AFS_FS_MAGIC 0x6B414653
+
#define REISERFS_SUPER_MAGIC 0x52654973 /* used by gcc */
/* used by file system utilities that
look at the superblock, etc. */
@@ -59,6 +63,9 @@
#define REISER2FS_JR_SUPER_MAGIC_STRING "ReIsEr3Fs"
#define SMB_SUPER_MAGIC 0x517B
+#define CIFS_SUPER_MAGIC 0xFF534D42 /* the first four bytes of SMB PDUs */
+#define SMB2_SUPER_MAGIC 0xFE534D42
+
#define CGROUP_SUPER_MAGIC 0x27e0eb
#define CGROUP2_SUPER_MAGIC 0x63677270
@@ -97,5 +104,6 @@
#define DEVMEM_MAGIC 0x454d444d /* "DMEM" */
#define Z3FOLD_MAGIC 0x33
#define PPC_CMM_MAGIC 0xc7571590
+#define SECRETMEM_MAGIC 0x5345434d /* "SECM" */
#endif /* __LINUX_MAGIC_H__ */
diff --git a/original/uapi/linux/major.h b/original/uapi/linux/major.h
index 7e5fa8e..4e5f2b3 100644
--- a/original/uapi/linux/major.h
+++ b/original/uapi/linux/major.h
@@ -34,8 +34,6 @@
#define GOLDSTAR_CDROM_MAJOR 16
#define OPTICS_CDROM_MAJOR 17
#define SANYO_CDROM_MAJOR 18
-#define CYCLADES_MAJOR 19
-#define CYCLADESAUX_MAJOR 20
#define MITSUMI_X_CDROM_MAJOR 20
#define MFM_ACORN_MAJOR 21 /* ARM Linux /dev/mfm */
#define SCSI_GENERIC_MAJOR 21
diff --git a/original/uapi/linux/map_to_14segment.h b/original/uapi/linux/map_to_14segment.h
new file mode 100644
index 0000000..0346ef7
--- /dev/null
+++ b/original/uapi/linux/map_to_14segment.h
@@ -0,0 +1,241 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on include/uapi/linux/map_to_7segment.h:
+
+ * Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
+ */
+
+#ifndef MAP_TO_14SEGMENT_H
+#define MAP_TO_14SEGMENT_H
+
+/* This file provides translation primitives and tables for the conversion
+ * of (ASCII) characters to a 14-segments notation.
+ *
+ * The 14 segment's wikipedia notation below is used as standard.
+ * See: https://en.wikipedia.org/wiki/Fourteen-segment_display
+ *
+ * Notation: +---a---+
+ * |\ | /|
+ * f h i j b
+ * | \|/ |
+ * +-g1+-g2+
+ * | /|\ |
+ * e k l m c
+ * |/ | \|
+ * +---d---+
+ *
+ * Usage:
+ *
+ * Register a map variable, and fill it with a character set:
+ * static SEG14_DEFAULT_MAP(map_seg14);
+ *
+ *
+ * Then use for conversion:
+ * seg14 = map_to_seg14(&map_seg14, some_char);
+ * ...
+ *
+ * In device drivers it is recommended, if required, to make the char map
+ * accessible via the sysfs interface using the following scheme:
+ *
+ * static ssize_t map_seg14_show(struct device *dev,
+ * struct device_attribute *attr, char *buf)
+ * {
+ * memcpy(buf, &map_seg14, sizeof(map_seg14));
+ * return sizeof(map_seg14);
+ * }
+ * static ssize_t map_seg14_store(struct device *dev,
+ * struct device_attribute *attr,
+ * const char *buf, size_t cnt)
+ * {
+ * if (cnt != sizeof(map_seg14))
+ * return -EINVAL;
+ * memcpy(&map_seg14, buf, cnt);
+ * return cnt;
+ * }
+ * static DEVICE_ATTR_RW(map_seg14);
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#include <asm/byteorder.h>
+
+#define BIT_SEG14_A 0
+#define BIT_SEG14_B 1
+#define BIT_SEG14_C 2
+#define BIT_SEG14_D 3
+#define BIT_SEG14_E 4
+#define BIT_SEG14_F 5
+#define BIT_SEG14_G1 6
+#define BIT_SEG14_G2 7
+#define BIT_SEG14_H 8
+#define BIT_SEG14_I 9
+#define BIT_SEG14_J 10
+#define BIT_SEG14_K 11
+#define BIT_SEG14_L 12
+#define BIT_SEG14_M 13
+#define BIT_SEG14_RESERVED1 14
+#define BIT_SEG14_RESERVED2 15
+
+struct seg14_conversion_map {
+ __be16 table[128];
+};
+
+static __inline__ int map_to_seg14(struct seg14_conversion_map *map, int c)
+{
+ if (c < 0 || c >= sizeof(map->table) / sizeof(map->table[0]))
+ return -EINVAL;
+
+ return __be16_to_cpu(map->table[c]);
+}
+
+#define SEG14_CONVERSION_MAP(_name, _map) \
+ struct seg14_conversion_map _name = { .table = { _map } }
+
+/*
+ * It is recommended to use a facility that allows user space to redefine
+ * custom character sets for LCD devices. Please use a sysfs interface
+ * as described above.
+ */
+#define MAP_TO_SEG14_SYSFS_FILE "map_seg14"
+
+/*******************************************************************************
+ * ASCII conversion table
+ ******************************************************************************/
+
+#define _SEG14(sym, a, b, c, d, e, f, g1, g2, h, j, k, l, m, n) \
+ __cpu_to_be16( a << BIT_SEG14_A | b << BIT_SEG14_B | \
+ c << BIT_SEG14_C | d << BIT_SEG14_D | \
+ e << BIT_SEG14_E | f << BIT_SEG14_F | \
+ g1 << BIT_SEG14_G1 | g2 << BIT_SEG14_G2 | \
+ h << BIT_SEG14_H | j << BIT_SEG14_I | \
+ k << BIT_SEG14_J | l << BIT_SEG14_K | \
+ m << BIT_SEG14_L | n << BIT_SEG14_M )
+
+#define _MAP_0_32_ASCII_SEG14_NON_PRINTABLE \
+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+
+#define _MAP_33_47_ASCII_SEG14_SYMBOL \
+ _SEG14('!', 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('"', 0, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0), \
+ _SEG14('#', 0, 1, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0), \
+ _SEG14('$', 1, 0, 1, 1, 0, 1, 1, 1, 0, 1, 0, 0, 1, 0), \
+ _SEG14('%', 0, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 1, 0, 0), \
+ _SEG14('&', 1, 0, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 0, 1), \
+ _SEG14('\'',0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0), \
+ _SEG14('(', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1), \
+ _SEG14(')', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0, 0), \
+ _SEG14('*', 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1), \
+ _SEG14('+', 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 0, 0, 1, 0), \
+ _SEG14(',', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0), \
+ _SEG14('-', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('.', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1), \
+ _SEG14('/', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0),
+
+#define _MAP_48_57_ASCII_SEG14_NUMERIC \
+ _SEG14('0', 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 0), \
+ _SEG14('1', 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0), \
+ _SEG14('2', 1, 1, 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('3', 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('4', 0, 1, 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('5', 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1), \
+ _SEG14('6', 1, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('7', 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0), \
+ _SEG14('8', 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('9', 1, 1, 1, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0),
+
+#define _MAP_58_64_ASCII_SEG14_SYMBOL \
+ _SEG14(':', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \
+ _SEG14(';', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0), \
+ _SEG14('<', 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1), \
+ _SEG14('=', 0, 0, 0, 1, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('>', 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0), \
+ _SEG14('?', 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 1, 0), \
+ _SEG14('@', 1, 1, 0, 1, 1, 1, 0, 1, 0, 1, 0, 0, 0, 0),
+
+#define _MAP_65_90_ASCII_SEG14_ALPHA_UPPER \
+ _SEG14('A', 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('B', 1, 1, 1, 1, 0, 0, 0, 1, 0, 1, 0, 0, 1, 0), \
+ _SEG14('C', 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('D', 1, 1, 1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \
+ _SEG14('E', 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('F', 1, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('G', 1, 0, 1, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('H', 0, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('I', 1, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \
+ _SEG14('J', 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('K', 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1), \
+ _SEG14('L', 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('M', 0, 1, 1, 0, 1, 1, 0, 0, 1, 0, 1, 0, 0, 0), \
+ _SEG14('N', 0, 1, 1, 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 1), \
+ _SEG14('O', 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('P', 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('Q', 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1), \
+ _SEG14('R', 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 1), \
+ _SEG14('S', 1, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('T', 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \
+ _SEG14('U', 0, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('V', 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 1, 1, 0, 0), \
+ _SEG14('W', 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 1, 0, 1), \
+ _SEG14('X', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 1, 0, 1), \
+ _SEG14('Y', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 1, 0), \
+ _SEG14('Z', 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0),
+
+#define _MAP_91_96_ASCII_SEG14_SYMBOL \
+ _SEG14('[', 1, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('\\',0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1), \
+ _SEG14(']', 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('^', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1), \
+ _SEG14('_', 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('`', 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0),
+
+#define _MAP_97_122_ASCII_SEG14_ALPHA_LOWER \
+ _SEG14('a', 0, 0, 0, 1, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0), \
+ _SEG14('b', 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1), \
+ _SEG14('c', 0, 0, 0, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('d', 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0), \
+ _SEG14('e', 0, 0, 0, 1, 1, 0, 1, 0, 0, 0, 0, 1, 0, 0), \
+ _SEG14('f', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 1, 0), \
+ _SEG14('g', 0, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0, 0), \
+ _SEG14('h', 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 1, 0), \
+ _SEG14('i', 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0), \
+ _SEG14('j', 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 1, 0, 0), \
+ _SEG14('k', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 1), \
+ _SEG14('l', 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('m', 0, 0, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 1, 0), \
+ _SEG14('n', 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 1, 0), \
+ _SEG14('o', 0, 0, 1, 1, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0), \
+ _SEG14('p', 0, 0, 0, 0, 1, 1, 1, 0, 1, 0, 0, 0, 0, 0), \
+ _SEG14('q', 0, 1, 1, 0, 0, 0, 0, 1, 0, 0, 1, 0, 0, 0), \
+ _SEG14('r', 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('s', 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1), \
+ _SEG14('t', 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('u', 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0), \
+ _SEG14('v', 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 0), \
+ _SEG14('w', 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 1, 0, 1), \
+ _SEG14('x', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 1, 0, 1), \
+ _SEG14('y', 0, 1, 1, 1, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0), \
+ _SEG14('z', 0, 0, 0, 1, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0),
+
+#define _MAP_123_126_ASCII_SEG14_SYMBOL \
+ _SEG14('{', 1, 0, 0, 1, 0, 0, 1, 0, 1, 0, 0, 1, 0, 0), \
+ _SEG14('|', 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 1, 0), \
+ _SEG14('}', 1, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0, 1), \
+ _SEG14('~', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 1, 0, 0),
+
+/* Maps */
+#define MAP_ASCII14SEG_ALPHANUM \
+ _MAP_0_32_ASCII_SEG14_NON_PRINTABLE \
+ _MAP_33_47_ASCII_SEG14_SYMBOL \
+ _MAP_48_57_ASCII_SEG14_NUMERIC \
+ _MAP_58_64_ASCII_SEG14_SYMBOL \
+ _MAP_65_90_ASCII_SEG14_ALPHA_UPPER \
+ _MAP_91_96_ASCII_SEG14_SYMBOL \
+ _MAP_97_122_ASCII_SEG14_ALPHA_LOWER \
+ _MAP_123_126_ASCII_SEG14_SYMBOL
+
+#define SEG14_DEFAULT_MAP(_name) \
+ SEG14_CONVERSION_MAP(_name, MAP_ASCII14SEG_ALPHANUM)
+
+#endif /* MAP_TO_14SEGMENT_H */
diff --git a/original/uapi/linux/map_to_7segment.h b/original/uapi/linux/map_to_7segment.h
index 8b02088..04c8b55 100644
--- a/original/uapi/linux/map_to_7segment.h
+++ b/original/uapi/linux/map_to_7segment.h
@@ -1,20 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
/*
* Copyright (c) 2005 Henk Vergonet <Henk.Vergonet@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef MAP_TO_7SEGMENT_H
diff --git a/original/uapi/linux/mctp.h b/original/uapi/linux/mctp.h
new file mode 100644
index 0000000..07b0318
--- /dev/null
+++ b/original/uapi/linux/mctp.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Management Component Transport Protocol (MCTP)
+ *
+ * Copyright (c) 2021 Code Construct
+ * Copyright (c) 2021 Google
+ */
+
+#ifndef __UAPI_MCTP_H
+#define __UAPI_MCTP_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/netdevice.h>
+
+typedef __u8 mctp_eid_t;
+
+struct mctp_addr {
+ mctp_eid_t s_addr;
+};
+
+struct sockaddr_mctp {
+ __kernel_sa_family_t smctp_family;
+ __u16 __smctp_pad0;
+ unsigned int smctp_network;
+ struct mctp_addr smctp_addr;
+ __u8 smctp_type;
+ __u8 smctp_tag;
+ __u8 __smctp_pad1;
+};
+
+struct sockaddr_mctp_ext {
+ struct sockaddr_mctp smctp_base;
+ int smctp_ifindex;
+ __u8 smctp_halen;
+ __u8 __smctp_pad0[3];
+ __u8 smctp_haddr[MAX_ADDR_LEN];
+};
+
+#define MCTP_NET_ANY 0x0
+
+#define MCTP_ADDR_NULL 0x00
+#define MCTP_ADDR_ANY 0xff
+
+#define MCTP_TAG_MASK 0x07
+#define MCTP_TAG_OWNER 0x08
+
+#define MCTP_OPT_ADDR_EXT 1
+
+#endif /* __UAPI_MCTP_H */
diff --git a/original/uapi/linux/mdio.h b/original/uapi/linux/mdio.h
index 3f302e2..c54e6ea 100644
--- a/original/uapi/linux/mdio.h
+++ b/original/uapi/linux/mdio.h
@@ -53,12 +53,14 @@
#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */
#define MDIO_AN_EEE_ADV2 62 /* EEE advertisement 2 */
#define MDIO_AN_EEE_LPABLE2 63 /* EEE link partner ability 2 */
+#define MDIO_AN_CTRL2 64 /* AN THP bypass request control */
/* Media-dependent registers. */
#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */
#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A.
* Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FSRT_CSR 147 /* 10GBASE-R fast retrain status and control */
#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */
#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */
#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */
@@ -120,6 +122,8 @@
#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */
#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */
#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */
+#define MDIO_PCS_SPEED_2_5G 0x0040 /* 2.5G capable */
+#define MDIO_PCS_SPEED_5G 0x0080 /* 5G capable */
/* Device present registers. */
#define MDIO_DEVS_PRESENT(devad) (1 << (devad))
@@ -237,6 +241,9 @@
#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */
#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */
+/* PMA 10GBASE-R Fast Retrain status and control register. */
+#define MDIO_PMA_10GBR_FSRT_ENABLE 0x0001 /* Fast retrain enable */
+
/* PCS 10GBASE-R/-T status register 1. */
#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */
@@ -245,6 +252,7 @@
#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00
/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADVFSRT2_5G 0x0020 /* Advertise 2.5GBASE-T fast retrain */
#define MDIO_AN_10GBT_CTRL_ADV2_5G 0x0080 /* Advertise 2.5GBASE-T */
#define MDIO_AN_10GBT_CTRL_ADV5G 0x0100 /* Advertise 5GBASE-T */
#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */
@@ -287,6 +295,9 @@
#define MDIO_EEE_2_5GT 0x0001 /* 2.5GT EEE cap */
#define MDIO_EEE_5GT 0x0002 /* 5GT EEE cap */
+/* AN MultiGBASE-T AN control 2 */
+#define MDIO_AN_THP_BP2_5GT 0x0008 /* 2.5GT THP bypass request */
+
/* 2.5G/5G Extended abilities register. */
#define MDIO_PMA_NG_EXTABLE_2_5GBT 0x0001 /* 2.5GBASET ability */
#define MDIO_PMA_NG_EXTABLE_5GBT 0x0002 /* 5GBASET ability */
diff --git a/original/uapi/linux/mempolicy.h b/original/uapi/linux/mempolicy.h
index 8948467..046d0cc 100644
--- a/original/uapi/linux/mempolicy.h
+++ b/original/uapi/linux/mempolicy.h
@@ -22,6 +22,7 @@
MPOL_BIND,
MPOL_INTERLEAVE,
MPOL_LOCAL,
+ MPOL_PREFERRED_MANY,
MPOL_MAX, /* always last member of enum */
};
@@ -60,9 +61,15 @@
* are never OR'ed into the mode in mempolicy API arguments.
*/
#define MPOL_F_SHARED (1 << 0) /* identify shared policies */
-#define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */
#define MPOL_F_MOF (1 << 3) /* this policy wants migrate on fault */
#define MPOL_F_MORON (1 << 4) /* Migrate On protnone Reference On Node */
+/*
+ * These bit locations are exposed in the vm.zone_reclaim_mode sysctl
+ * ABI. New bits are OK, but existing bits can never change.
+ */
+#define RECLAIM_ZONE (1<<0) /* Run shrink_inactive_list on the zone */
+#define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */
+#define RECLAIM_UNMAP (1<<2) /* Unmap pages during reclaim */
#endif /* _UAPI_LINUX_MEMPOLICY_H */
diff --git a/original/uapi/linux/module.h b/original/uapi/linux/module.h
index 50d98ec..03a33ff 100644
--- a/original/uapi/linux/module.h
+++ b/original/uapi/linux/module.h
@@ -5,5 +5,6 @@
/* Flags for sys_finit_module: */
#define MODULE_INIT_IGNORE_MODVERSIONS 1
#define MODULE_INIT_IGNORE_VERMAGIC 2
+#define MODULE_INIT_COMPRESSED_FILE 4
#endif /* _UAPI_LINUX_MODULE_H */
diff --git a/original/uapi/linux/mount.h b/original/uapi/linux/mount.h
index e6524ea..4d93967 100644
--- a/original/uapi/linux/mount.h
+++ b/original/uapi/linux/mount.h
@@ -73,7 +73,8 @@
#define MOVE_MOUNT_T_SYMLINKS 0x00000010 /* Follow symlinks on to path */
#define MOVE_MOUNT_T_AUTOMOUNTS 0x00000020 /* Follow automounts on to path */
#define MOVE_MOUNT_T_EMPTY_PATH 0x00000040 /* Empty to path permitted */
-#define MOVE_MOUNT__MASK 0x00000077
+#define MOVE_MOUNT_SET_GROUP 0x00000100 /* Set sharing group instead */
+#define MOVE_MOUNT__MASK 0x00000177
/*
* fsopen() flags.
@@ -120,6 +121,7 @@
#define MOUNT_ATTR_STRICTATIME 0x00000020 /* - Always perform atime updates */
#define MOUNT_ATTR_NODIRATIME 0x00000080 /* Do not update directory access times */
#define MOUNT_ATTR_IDMAP 0x00100000 /* Idmap mount to @userns_fd in struct mount_attr. */
+#define MOUNT_ATTR_NOSYMFOLLOW 0x00200000 /* Do not follow symlinks */
/*
* mount_setattr()
diff --git a/original/uapi/linux/mptcp.h b/original/uapi/linux/mptcp.h
index e1172c1..f106a39 100644
--- a/original/uapi/linux/mptcp.h
+++ b/original/uapi/linux/mptcp.h
@@ -4,6 +4,13 @@
#include <linux/const.h>
#include <linux/types.h>
+#include <linux/in.h> /* for sockaddr_in */
+#include <linux/in6.h> /* for sockaddr_in6 */
+#include <linux/socket.h> /* for sockaddr_storage and sa_family */
+
+#ifndef __KERNEL__
+#include <sys/socket.h> /* for struct sockaddr */
+#endif
#define MPTCP_SUBFLOW_FLAG_MCAP_REM _BITUL(0)
#define MPTCP_SUBFLOW_FLAG_MCAP_LOC _BITUL(1)
@@ -73,6 +80,7 @@
#define MPTCP_PM_ADDR_FLAG_SIGNAL (1 << 0)
#define MPTCP_PM_ADDR_FLAG_SUBFLOW (1 << 1)
#define MPTCP_PM_ADDR_FLAG_BACKUP (1 << 2)
+#define MPTCP_PM_ADDR_FLAG_FULLMESH (1 << 3)
enum {
MPTCP_PM_CMD_UNSPEC,
@@ -105,6 +113,7 @@
__u64 mptcpi_rcv_nxt;
__u8 mptcpi_local_addr_used;
__u8 mptcpi_local_addr_max;
+ __u8 mptcpi_csum_enabled;
};
/*
@@ -127,19 +136,21 @@
* MPTCP_EVENT_REMOVED: token, rem_id
* An address has been lost by the peer.
*
- * MPTCP_EVENT_SUB_ESTABLISHED: token, family, saddr4 | saddr6,
- * daddr4 | daddr6, sport, dport, backup,
- * if_idx [, error]
+ * MPTCP_EVENT_SUB_ESTABLISHED: token, family, loc_id, rem_id,
+ * saddr4 | saddr6, daddr4 | daddr6, sport,
+ * dport, backup, if_idx [, error]
* A new subflow has been established. 'error' should not be set.
*
- * MPTCP_EVENT_SUB_CLOSED: token, family, saddr4 | saddr6, daddr4 | daddr6,
- * sport, dport, backup, if_idx [, error]
+ * MPTCP_EVENT_SUB_CLOSED: token, family, loc_id, rem_id, saddr4 | saddr6,
+ * daddr4 | daddr6, sport, dport, backup, if_idx
+ * [, error]
* A subflow has been closed. An error (copy of sk_err) could be set if an
* error has been detected for this subflow.
*
- * MPTCP_EVENT_SUB_PRIORITY: token, family, saddr4 | saddr6, daddr4 | daddr6,
- * sport, dport, backup, if_idx [, error]
- * The priority of a subflow has changed. 'error' should not be set.
+ * MPTCP_EVENT_SUB_PRIORITY: token, family, loc_id, rem_id, saddr4 | saddr6,
+ * daddr4 | daddr6, sport, dport, backup, if_idx
+ * [, error]
+ * The priority of a subflow has changed. 'error' should not be set.
*/
enum mptcp_event_type {
MPTCP_EVENT_UNSPEC = 0,
@@ -174,10 +185,49 @@
MPTCP_ATTR_FLAGS, /* u16 */
MPTCP_ATTR_TIMEOUT, /* u32 */
MPTCP_ATTR_IF_IDX, /* s32 */
+ MPTCP_ATTR_RESET_REASON,/* u32 */
+ MPTCP_ATTR_RESET_FLAGS, /* u32 */
__MPTCP_ATTR_AFTER_LAST
};
#define MPTCP_ATTR_MAX (__MPTCP_ATTR_AFTER_LAST - 1)
+/* MPTCP Reset reason codes, rfc8684 */
+#define MPTCP_RST_EUNSPEC 0
+#define MPTCP_RST_EMPTCP 1
+#define MPTCP_RST_ERESOURCE 2
+#define MPTCP_RST_EPROHIBIT 3
+#define MPTCP_RST_EWQ2BIG 4
+#define MPTCP_RST_EBADPERF 5
+#define MPTCP_RST_EMIDDLEBOX 6
+
+struct mptcp_subflow_data {
+ __u32 size_subflow_data; /* size of this structure in userspace */
+ __u32 num_subflows; /* must be 0, set by kernel */
+ __u32 size_kernel; /* must be 0, set by kernel */
+ __u32 size_user; /* size of one element in data[] */
+} __attribute__((aligned(8)));
+
+struct mptcp_subflow_addrs {
+ union {
+ __kernel_sa_family_t sa_family;
+ struct sockaddr sa_local;
+ struct sockaddr_in sin_local;
+ struct sockaddr_in6 sin6_local;
+ struct __kernel_sockaddr_storage ss_local;
+ };
+ union {
+ struct sockaddr sa_remote;
+ struct sockaddr_in sin_remote;
+ struct sockaddr_in6 sin6_remote;
+ struct __kernel_sockaddr_storage ss_remote;
+ };
+};
+
+/* MPTCP socket options */
+#define MPTCP_INFO 1
+#define MPTCP_TCPINFO 2
+#define MPTCP_SUBFLOW_ADDRS 3
+
#endif /* _UAPI_MPTCP_H */
diff --git a/original/uapi/linux/n_r3964.h b/original/uapi/linux/n_r3964.h
deleted file mode 100644
index 6bbd185..0000000
--- a/original/uapi/linux/n_r3964.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */
-/* r3964 linediscipline for linux
- *
- * -----------------------------------------------------------
- * Copyright by
- * Philips Automation Projects
- * Kassel (Germany)
- * -----------------------------------------------------------
- * This software may be used and distributed according to the terms of
- * the GNU General Public License, incorporated herein by reference.
- *
- * Author:
- * L. Haag
- *
- * $Log: r3964.h,v $
- * Revision 1.4 2005/12/21 19:54:24 Kurt Huwig <kurt huwig de>
- * Fixed HZ usage on 2.6 kernels
- * Removed unnecessary include
- *
- * Revision 1.3 2001/03/18 13:02:24 dwmw2
- * Fix timer usage, use spinlocks properly.
- *
- * Revision 1.2 2001/03/18 12:53:15 dwmw2
- * Merge changes in 2.4.2
- *
- * Revision 1.1.1.1 1998/10/13 16:43:14 dwmw2
- * This'll screw the version control
- *
- * Revision 1.6 1998/09/30 00:40:38 dwmw2
- * Updated to use kernel's N_R3964 if available
- *
- * Revision 1.4 1998/04/02 20:29:44 lhaag
- * select, blocking, ...
- *
- * Revision 1.3 1998/02/12 18:58:43 root
- * fixed some memory leaks
- * calculation of checksum characters
- *
- * Revision 1.2 1998/02/07 13:03:17 root
- * ioctl read_telegram
- *
- * Revision 1.1 1998/02/06 19:19:43 root
- * Initial revision
- *
- *
- */
-
-#ifndef _UAPI__LINUX_N_R3964_H__
-#define _UAPI__LINUX_N_R3964_H__
-
-/* line disciplines for r3964 protocol */
-
-
-/*
- * Ioctl-commands
- */
-
-#define R3964_ENABLE_SIGNALS 0x5301
-#define R3964_SETPRIORITY 0x5302
-#define R3964_USE_BCC 0x5303
-#define R3964_READ_TELEGRAM 0x5304
-
-/* Options for R3964_SETPRIORITY */
-#define R3964_MASTER 0
-#define R3964_SLAVE 1
-
-/* Options for R3964_ENABLE_SIGNALS */
-#define R3964_SIG_ACK 0x0001
-#define R3964_SIG_DATA 0x0002
-#define R3964_SIG_ALL 0x000f
-#define R3964_SIG_NONE 0x0000
-#define R3964_USE_SIGIO 0x1000
-
-/*
- * r3964 operation states:
- */
-
-/* types for msg_id: */
-enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
-
-#define R3964_MAX_MSG_COUNT 32
-
-/* error codes for client messages */
-#define R3964_OK 0 /* no error. */
-#define R3964_TX_FAIL -1 /* transmission error, block NOT sent */
-#define R3964_OVERFLOW -2 /* msg queue overflow */
-
-/* the client gets this struct when calling read(fd,...): */
-struct r3964_client_message {
- int msg_id;
- int arg;
- int error_code;
-};
-
-#define R3964_MTU 256
-
-
-
-#endif /* _UAPI__LINUX_N_R3964_H__ */
diff --git a/original/uapi/linux/nbd-netlink.h b/original/uapi/linux/nbd-netlink.h
index c5d0ef7..2d0b909 100644
--- a/original/uapi/linux/nbd-netlink.h
+++ b/original/uapi/linux/nbd-netlink.h
@@ -35,6 +35,7 @@
NBD_ATTR_SOCKETS,
NBD_ATTR_DEAD_CONN_TIMEOUT,
NBD_ATTR_DEVICE_LIST,
+ NBD_ATTR_BACKEND_IDENTIFIER,
__NBD_ATTR_MAX,
};
#define NBD_ATTR_MAX (__NBD_ATTR_MAX - 1)
diff --git a/original/uapi/linux/neighbour.h b/original/uapi/linux/neighbour.h
index dc8b722..db05fb5 100644
--- a/original/uapi/linux/neighbour.h
+++ b/original/uapi/linux/neighbour.h
@@ -31,6 +31,7 @@
NDA_PROTOCOL, /* Originator of entry */
NDA_NH_ID,
NDA_FDB_EXT_ATTRS,
+ NDA_FLAGS_EXT,
__NDA_MAX
};
@@ -40,14 +41,16 @@
* Neighbor Cache Entry Flags
*/
-#define NTF_USE 0x01
-#define NTF_SELF 0x02
-#define NTF_MASTER 0x04
-#define NTF_PROXY 0x08 /* == ATF_PUBL */
-#define NTF_EXT_LEARNED 0x10
-#define NTF_OFFLOADED 0x20
-#define NTF_STICKY 0x40
-#define NTF_ROUTER 0x80
+#define NTF_USE (1 << 0)
+#define NTF_SELF (1 << 1)
+#define NTF_MASTER (1 << 2)
+#define NTF_PROXY (1 << 3) /* == ATF_PUBL */
+#define NTF_EXT_LEARNED (1 << 4)
+#define NTF_OFFLOADED (1 << 5)
+#define NTF_STICKY (1 << 6)
+#define NTF_ROUTER (1 << 7)
+/* Extended flags under NDA_FLAGS_EXT: */
+#define NTF_EXT_MANAGED (1 << 0)
/*
* Neighbor Cache Entry States.
@@ -65,9 +68,22 @@
#define NUD_PERMANENT 0x80
#define NUD_NONE 0x00
-/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change
- and make no address resolution or NUD.
- NUD_PERMANENT also cannot be deleted by garbage collectors.
+/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change and make no
+ * address resolution or NUD.
+ *
+ * NUD_PERMANENT also cannot be deleted by garbage collectors. This holds true
+ * for dynamic entries with NTF_EXT_LEARNED flag as well. However, upon carrier
+ * down event, NUD_PERMANENT entries are not flushed whereas NTF_EXT_LEARNED
+ * flagged entries explicitly are (which is also consistent with the routing
+ * subsystem).
+ *
+ * When NTF_EXT_LEARNED is set for a bridge fdb entry the different cache entry
+ * states don't make sense and thus are ignored. Such entries don't age and
+ * can roam.
+ *
+ * NTF_EXT_MANAGED flagged neigbor entries are managed by the kernel on behalf
+ * of a user space control plane, and automatically refreshed so that (if
+ * possible) they remain in NUD_REACHABLE state.
*/
struct nda_cacheinfo {
diff --git a/original/uapi/linux/net_tstamp.h b/original/uapi/linux/net_tstamp.h
index 7ed0b3d..55501e5 100644
--- a/original/uapi/linux/net_tstamp.h
+++ b/original/uapi/linux/net_tstamp.h
@@ -13,7 +13,7 @@
#include <linux/types.h>
#include <linux/socket.h> /* for SO_TIMESTAMPING */
-/* SO_TIMESTAMPING gets an integer bit field comprised of these values */
+/* SO_TIMESTAMPING flags */
enum {
SOF_TIMESTAMPING_TX_HARDWARE = (1<<0),
SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1),
@@ -30,8 +30,9 @@
SOF_TIMESTAMPING_OPT_STATS = (1<<12),
SOF_TIMESTAMPING_OPT_PKTINFO = (1<<13),
SOF_TIMESTAMPING_OPT_TX_SWHW = (1<<14),
+ SOF_TIMESTAMPING_BIND_PHC = (1 << 15),
- SOF_TIMESTAMPING_LAST = SOF_TIMESTAMPING_OPT_TX_SWHW,
+ SOF_TIMESTAMPING_LAST = SOF_TIMESTAMPING_BIND_PHC,
SOF_TIMESTAMPING_MASK = (SOF_TIMESTAMPING_LAST - 1) |
SOF_TIMESTAMPING_LAST
};
@@ -47,9 +48,21 @@
SOF_TIMESTAMPING_TX_ACK)
/**
+ * struct so_timestamping - SO_TIMESTAMPING parameter
+ *
+ * @flags: SO_TIMESTAMPING flags
+ * @bind_phc: Index of PTP virtual clock bound to sock. This is available
+ * if flag SOF_TIMESTAMPING_BIND_PHC is set.
+ */
+struct so_timestamping {
+ int flags;
+ int bind_phc;
+};
+
+/**
* struct hwtstamp_config - %SIOCGHWTSTAMP and %SIOCSHWTSTAMP parameter
*
- * @flags: no flags defined right now, must be zero for %SIOCSHWTSTAMP
+ * @flags: one of HWTSTAMP_FLAG_*
* @tx_type: one of HWTSTAMP_TX_*
* @rx_filter: one of HWTSTAMP_FILTER_*
*
@@ -65,6 +78,21 @@
int rx_filter;
};
+/* possible values for hwtstamp_config->flags */
+enum hwtstamp_flags {
+ /*
+ * With this flag, the user could get bond active interface's
+ * PHC index. Note this PHC index is not stable as when there
+ * is a failover, the bond active interface will be changed, so
+ * will be the PHC index.
+ */
+ HWTSTAMP_FLAG_BONDED_PHC_INDEX = (1<<0),
+#define HWTSTAMP_FLAG_BONDED_PHC_INDEX HWTSTAMP_FLAG_BONDED_PHC_INDEX
+
+ HWTSTAMP_FLAG_LAST = HWTSTAMP_FLAG_BONDED_PHC_INDEX,
+ HWTSTAMP_FLAG_MASK = (HWTSTAMP_FLAG_LAST - 1) | HWTSTAMP_FLAG_LAST
+};
+
/* possible values for hwtstamp_config->tx_type */
enum hwtstamp_tx_types {
/*
diff --git a/original/uapi/linux/netfilter.h b/original/uapi/linux/netfilter.h
index ef9a442..53411cc 100644
--- a/original/uapi/linux/netfilter.h
+++ b/original/uapi/linux/netfilter.h
@@ -51,6 +51,7 @@
enum nf_dev_hooks {
NF_NETDEV_INGRESS,
+ NF_NETDEV_EGRESS,
NF_NETDEV_NUMHOOKS
};
diff --git a/original/uapi/linux/netfilter/nf_conntrack_common.h b/original/uapi/linux/netfilter/nf_conntrack_common.h
index 4b33950..2607102 100644
--- a/original/uapi/linux/netfilter/nf_conntrack_common.h
+++ b/original/uapi/linux/netfilter/nf_conntrack_common.h
@@ -106,7 +106,7 @@
IPS_NAT_CLASH = IPS_UNTRACKED,
#endif
- /* Conntrack got a helper explicitly attached via CT target. */
+ /* Conntrack got a helper explicitly attached (ruleset, ctnetlink). */
IPS_HELPER_BIT = 13,
IPS_HELPER = (1 << IPS_HELPER_BIT),
diff --git a/original/uapi/linux/netfilter/nf_tables.h b/original/uapi/linux/netfilter/nf_tables.h
index 79bab7a..466fd3f 100644
--- a/original/uapi/linux/netfilter/nf_tables.h
+++ b/original/uapi/linux/netfilter/nf_tables.h
@@ -398,9 +398,11 @@
* enum nft_set_elem_flags - nf_tables set element flags
*
* @NFT_SET_ELEM_INTERVAL_END: element ends the previous interval
+ * @NFT_SET_ELEM_CATCHALL: special catch-all element
*/
enum nft_set_elem_flags {
NFT_SET_ELEM_INTERVAL_END = 0x1,
+ NFT_SET_ELEM_CATCHALL = 0x2,
};
/**
@@ -751,11 +753,13 @@
* @NFT_PAYLOAD_LL_HEADER: link layer header
* @NFT_PAYLOAD_NETWORK_HEADER: network header
* @NFT_PAYLOAD_TRANSPORT_HEADER: transport header
+ * @NFT_PAYLOAD_INNER_HEADER: inner header / payload
*/
enum nft_payload_bases {
NFT_PAYLOAD_LL_HEADER,
NFT_PAYLOAD_NETWORK_HEADER,
NFT_PAYLOAD_TRANSPORT_HEADER,
+ NFT_PAYLOAD_INNER_HEADER,
};
/**
@@ -811,11 +815,13 @@
* @NFT_EXTHDR_OP_IPV6: match against ipv6 extension headers
* @NFT_EXTHDR_OP_TCP: match against tcp options
* @NFT_EXTHDR_OP_IPV4: match against ipv4 options
+ * @NFT_EXTHDR_OP_SCTP: match against sctp chunks
*/
enum nft_exthdr_op {
NFT_EXTHDR_OP_IPV6,
NFT_EXTHDR_OP_TCPOPT,
NFT_EXTHDR_OP_IPV4,
+ NFT_EXTHDR_OP_SCTP,
__NFT_EXTHDR_OP_MAX
};
#define NFT_EXTHDR_OP_MAX (__NFT_EXTHDR_OP_MAX - 1)
@@ -892,7 +898,8 @@
NFT_META_OIF,
NFT_META_IIFNAME,
NFT_META_OIFNAME,
- NFT_META_IIFTYPE,
+ NFT_META_IFTYPE,
+#define NFT_META_IIFTYPE NFT_META_IFTYPE
NFT_META_OIFTYPE,
NFT_META_SKUID,
NFT_META_SKGID,
@@ -919,6 +926,7 @@
NFT_META_TIME_HOUR,
NFT_META_SDIF,
NFT_META_SDIFNAME,
+ __NFT_META_IIFTYPE,
};
/**
@@ -1014,11 +1022,13 @@
*
* @NFTA_SOCKET_KEY: socket key to match
* @NFTA_SOCKET_DREG: destination register
+ * @NFTA_SOCKET_LEVEL: cgroups2 ancestor level (only for cgroupsv2)
*/
enum nft_socket_attributes {
NFTA_SOCKET_UNSPEC,
NFTA_SOCKET_KEY,
NFTA_SOCKET_DREG,
+ NFTA_SOCKET_LEVEL,
__NFTA_SOCKET_MAX
};
#define NFTA_SOCKET_MAX (__NFTA_SOCKET_MAX - 1)
@@ -1029,11 +1039,13 @@
* @NFT_SOCKET_TRANSPARENT: Value of the IP(V6)_TRANSPARENT socket option
* @NFT_SOCKET_MARK: Value of the socket mark
* @NFT_SOCKET_WILDCARD: Whether the socket is zero-bound (e.g. 0.0.0.0 or ::0)
+ * @NFT_SOCKET_CGROUPV2: Match on cgroups version 2
*/
enum nft_socket_keys {
NFT_SOCKET_TRANSPARENT,
NFT_SOCKET_MARK,
NFT_SOCKET_WILDCARD,
+ NFT_SOCKET_CGROUPV2,
__NFT_SOCKET_MAX
};
#define NFT_SOCKET_MAX (__NFT_SOCKET_MAX - 1)
@@ -1188,6 +1200,21 @@
#define NFTA_COUNTER_MAX (__NFTA_COUNTER_MAX - 1)
/**
+ * enum nft_last_attributes - nf_tables last expression netlink attributes
+ *
+ * @NFTA_LAST_SET: last update has been set, zero means never updated (NLA_U32)
+ * @NFTA_LAST_MSECS: milliseconds since last update (NLA_U64)
+ */
+enum nft_last_attributes {
+ NFTA_LAST_UNSPEC,
+ NFTA_LAST_SET,
+ NFTA_LAST_MSECS,
+ NFTA_LAST_PAD,
+ __NFTA_LAST_MAX
+};
+#define NFTA_LAST_MAX (__NFTA_LAST_MAX - 1)
+
+/**
* enum nft_log_attributes - nf_tables log expression netlink attributes
*
* @NFTA_LOG_GROUP: netlink group to send messages to (NLA_U32)
diff --git a/original/uapi/linux/netfilter/nfnetlink.h b/original/uapi/linux/netfilter/nfnetlink.h
index 5bc960f..6cd58cd 100644
--- a/original/uapi/linux/netfilter/nfnetlink.h
+++ b/original/uapi/linux/netfilter/nfnetlink.h
@@ -60,7 +60,8 @@
#define NFNL_SUBSYS_CTHELPER 9
#define NFNL_SUBSYS_NFTABLES 10
#define NFNL_SUBSYS_NFT_COMPAT 11
-#define NFNL_SUBSYS_COUNT 12
+#define NFNL_SUBSYS_HOOK 12
+#define NFNL_SUBSYS_COUNT 13
/* Reserved control nfnetlink messages */
#define NFNL_MSG_BATCH_BEGIN NLMSG_MIN_TYPE
diff --git a/original/uapi/linux/netfilter/nfnetlink_conntrack.h b/original/uapi/linux/netfilter/nfnetlink_conntrack.h
index d8484be..c2ac726 100644
--- a/original/uapi/linux/netfilter/nfnetlink_conntrack.h
+++ b/original/uapi/linux/netfilter/nfnetlink_conntrack.h
@@ -56,6 +56,7 @@
CTA_LABELS_MASK,
CTA_SYNPROXY,
CTA_FILTER,
+ CTA_STATUS_MASK,
__CTA_MAX
};
#define CTA_MAX (__CTA_MAX - 1)
@@ -257,6 +258,7 @@
CTA_STATS_ERROR,
CTA_STATS_SEARCH_RESTART,
CTA_STATS_CLASH_RESOLVE,
+ CTA_STATS_CHAIN_TOOLONG,
__CTA_STATS_MAX,
};
#define CTA_STATS_MAX (__CTA_STATS_MAX - 1)
diff --git a/original/uapi/linux/netfilter/nfnetlink_hook.h b/original/uapi/linux/netfilter/nfnetlink_hook.h
new file mode 100644
index 0000000..bbcd285
--- /dev/null
+++ b/original/uapi/linux/netfilter/nfnetlink_hook.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _NFNL_HOOK_H_
+#define _NFNL_HOOK_H_
+
+enum nfnl_hook_msg_types {
+ NFNL_MSG_HOOK_GET,
+ NFNL_MSG_HOOK_MAX,
+};
+
+/**
+ * enum nfnl_hook_attributes - netfilter hook netlink attributes
+ *
+ * @NFNLA_HOOK_HOOKNUM: netfilter hook number (NLA_U32)
+ * @NFNLA_HOOK_PRIORITY: netfilter hook priority (NLA_U32)
+ * @NFNLA_HOOK_DEV: netdevice name (NLA_STRING)
+ * @NFNLA_HOOK_FUNCTION_NAME: hook function name (NLA_STRING)
+ * @NFNLA_HOOK_MODULE_NAME: kernel module that registered this hook (NLA_STRING)
+ * @NFNLA_HOOK_CHAIN_INFO: basechain hook metadata (NLA_NESTED)
+ */
+enum nfnl_hook_attributes {
+ NFNLA_HOOK_UNSPEC,
+ NFNLA_HOOK_HOOKNUM,
+ NFNLA_HOOK_PRIORITY,
+ NFNLA_HOOK_DEV,
+ NFNLA_HOOK_FUNCTION_NAME,
+ NFNLA_HOOK_MODULE_NAME,
+ NFNLA_HOOK_CHAIN_INFO,
+ __NFNLA_HOOK_MAX
+};
+#define NFNLA_HOOK_MAX (__NFNLA_HOOK_MAX - 1)
+
+/**
+ * enum nfnl_hook_chain_info_attributes - chain description
+ *
+ * NFNLA_HOOK_INFO_DESC: nft chain and table name (enum nft_table_attributes) (NLA_NESTED)
+ * NFNLA_HOOK_INFO_TYPE: chain type (enum nfnl_hook_chaintype) (NLA_U32)
+ */
+enum nfnl_hook_chain_info_attributes {
+ NFNLA_HOOK_INFO_UNSPEC,
+ NFNLA_HOOK_INFO_DESC,
+ NFNLA_HOOK_INFO_TYPE,
+ __NFNLA_HOOK_INFO_MAX,
+};
+#define NFNLA_HOOK_INFO_MAX (__NFNLA_HOOK_INFO_MAX - 1)
+
+enum nfnl_hook_chain_desc_attributes {
+ NFNLA_CHAIN_UNSPEC,
+ NFNLA_CHAIN_TABLE,
+ NFNLA_CHAIN_FAMILY,
+ NFNLA_CHAIN_NAME,
+ __NFNLA_CHAIN_MAX,
+};
+#define NFNLA_CHAIN_MAX (__NFNLA_CHAIN_MAX - 1)
+
+/**
+ * enum nfnl_hook_chaintype - chain type
+ *
+ * @NFNL_HOOK_TYPE_NFTABLES nf_tables base chain
+ */
+enum nfnl_hook_chaintype {
+ NFNL_HOOK_TYPE_NFTABLES = 0x1,
+};
+
+#endif /* _NFNL_HOOK_H */
diff --git a/original/uapi/linux/netfilter/nfnetlink_log.h b/original/uapi/linux/netfilter/nfnetlink_log.h
index 45c8d3b..0af9c11 100644
--- a/original/uapi/linux/netfilter/nfnetlink_log.h
+++ b/original/uapi/linux/netfilter/nfnetlink_log.h
@@ -61,7 +61,7 @@
NFULA_HWTYPE, /* hardware type */
NFULA_HWHEADER, /* hardware header */
NFULA_HWLEN, /* hardware header length */
- NFULA_CT, /* nf_conntrack_netlink.h */
+ NFULA_CT, /* nfnetlink_conntrack.h */
NFULA_CT_INFO, /* enum ip_conntrack_info */
NFULA_VLAN, /* nested attribute: packet vlan info */
NFULA_L2HDR, /* full L2 header */
diff --git a/original/uapi/linux/netfilter/nfnetlink_queue.h b/original/uapi/linux/netfilter/nfnetlink_queue.h
index bcb2cb5..aed90c4 100644
--- a/original/uapi/linux/netfilter/nfnetlink_queue.h
+++ b/original/uapi/linux/netfilter/nfnetlink_queue.h
@@ -51,11 +51,11 @@
NFQA_IFINDEX_PHYSOUTDEV, /* __u32 ifindex */
NFQA_HWADDR, /* nfqnl_msg_packet_hw */
NFQA_PAYLOAD, /* opaque data payload */
- NFQA_CT, /* nf_conntrack_netlink.h */
+ NFQA_CT, /* nfnetlink_conntrack.h */
NFQA_CT_INFO, /* enum ip_conntrack_info */
NFQA_CAP_LEN, /* __u32 length of captured packet */
NFQA_SKB_INFO, /* __u32 skb meta information */
- NFQA_EXP, /* nf_conntrack_netlink.h */
+ NFQA_EXP, /* nfnetlink_conntrack.h */
NFQA_UID, /* __u32 sk uid */
NFQA_GID, /* __u32 sk gid */
NFQA_SECCTX, /* security context string */
diff --git a/original/uapi/linux/netfilter/xt_IDLETIMER.h b/original/uapi/linux/netfilter/xt_IDLETIMER.h
index 49ddcdc..07ae4e1 100644
--- a/original/uapi/linux/netfilter/xt_IDLETIMER.h
+++ b/original/uapi/linux/netfilter/xt_IDLETIMER.h
@@ -48,7 +48,7 @@
char label[MAX_IDLETIMER_LABEL_SIZE];
- __u8 send_nl_msg; /* unused: for compatibility with Android */
+ __u8 send_nl_msg;
__u8 timer_type;
/* for kernel module internal use only */
diff --git a/original/uapi/linux/netfilter/xt_SECMARK.h b/original/uapi/linux/netfilter/xt_SECMARK.h
index 1f2a708..beb2cad 100644
--- a/original/uapi/linux/netfilter/xt_SECMARK.h
+++ b/original/uapi/linux/netfilter/xt_SECMARK.h
@@ -20,4 +20,10 @@
char secctx[SECMARK_SECCTX_MAX];
};
+struct xt_secmark_target_info_v1 {
+ __u8 mode;
+ char secctx[SECMARK_SECCTX_MAX];
+ __u32 secid;
+};
+
#endif /*_XT_SECMARK_H_target */
diff --git a/original/uapi/linux/netlink.h b/original/uapi/linux/netlink.h
index 3d94269..4c0cde0 100644
--- a/original/uapi/linux/netlink.h
+++ b/original/uapi/linux/netlink.h
@@ -91,9 +91,10 @@
#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
#define NLMSG_LENGTH(len) ((len) + NLMSG_HDRLEN)
#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
-#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
+#define NLMSG_DATA(nlh) ((void *)(((char *)nlh) + NLMSG_HDRLEN))
#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
- (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
+ (struct nlmsghdr *)(((char *)(nlh)) + \
+ NLMSG_ALIGN((nlh)->nlmsg_len)))
#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
(nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
(nlh)->nlmsg_len <= (len))
diff --git a/original/uapi/linux/nexthop.h b/original/uapi/linux/nexthop.h
index 2d4a1e7..d8ffa8c 100644
--- a/original/uapi/linux/nexthop.h
+++ b/original/uapi/linux/nexthop.h
@@ -21,7 +21,10 @@
};
enum {
- NEXTHOP_GRP_TYPE_MPATH, /* default type if not specified */
+ NEXTHOP_GRP_TYPE_MPATH, /* hash-threshold nexthop group
+ * default type if not specified
+ */
+ NEXTHOP_GRP_TYPE_RES, /* resilient nexthop group */
__NEXTHOP_GRP_TYPE_MAX,
};
@@ -52,8 +55,50 @@
NHA_FDB, /* flag; nexthop belongs to a bridge fdb */
/* if NHA_FDB is added, OIF, BLACKHOLE, ENCAP cannot be set */
+ /* nested; resilient nexthop group attributes */
+ NHA_RES_GROUP,
+ /* nested; nexthop bucket attributes */
+ NHA_RES_BUCKET,
+
__NHA_MAX,
};
#define NHA_MAX (__NHA_MAX - 1)
+
+enum {
+ NHA_RES_GROUP_UNSPEC,
+ /* Pad attribute for 64-bit alignment. */
+ NHA_RES_GROUP_PAD = NHA_RES_GROUP_UNSPEC,
+
+ /* u16; number of nexthop buckets in a resilient nexthop group */
+ NHA_RES_GROUP_BUCKETS,
+ /* clock_t as u32; nexthop bucket idle timer (per-group) */
+ NHA_RES_GROUP_IDLE_TIMER,
+ /* clock_t as u32; nexthop unbalanced timer */
+ NHA_RES_GROUP_UNBALANCED_TIMER,
+ /* clock_t as u64; nexthop unbalanced time */
+ NHA_RES_GROUP_UNBALANCED_TIME,
+
+ __NHA_RES_GROUP_MAX,
+};
+
+#define NHA_RES_GROUP_MAX (__NHA_RES_GROUP_MAX - 1)
+
+enum {
+ NHA_RES_BUCKET_UNSPEC,
+ /* Pad attribute for 64-bit alignment. */
+ NHA_RES_BUCKET_PAD = NHA_RES_BUCKET_UNSPEC,
+
+ /* u16; nexthop bucket index */
+ NHA_RES_BUCKET_INDEX,
+ /* clock_t as u64; nexthop bucket idle time */
+ NHA_RES_BUCKET_IDLE_TIME,
+ /* u32; nexthop id assigned to the nexthop bucket */
+ NHA_RES_BUCKET_NH_ID,
+
+ __NHA_RES_BUCKET_MAX,
+};
+
+#define NHA_RES_BUCKET_MAX (__NHA_RES_BUCKET_MAX - 1)
+
#endif
diff --git a/original/uapi/linux/nfc.h b/original/uapi/linux/nfc.h
index f6e3c8c..4fa4e97 100644
--- a/original/uapi/linux/nfc.h
+++ b/original/uapi/linux/nfc.h
@@ -263,7 +263,7 @@
#define NFC_SE_ENABLED 0x1
struct sockaddr_nfc {
- sa_family_t sa_family;
+ __kernel_sa_family_t sa_family;
__u32 dev_idx;
__u32 target_idx;
__u32 nfc_protocol;
@@ -271,14 +271,14 @@
#define NFC_LLCP_MAX_SERVICE_NAME 63
struct sockaddr_nfc_llcp {
- sa_family_t sa_family;
+ __kernel_sa_family_t sa_family;
__u32 dev_idx;
__u32 target_idx;
__u32 nfc_protocol;
__u8 dsap; /* Destination SAP, if known */
__u8 ssap; /* Source SAP to be bound to */
char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */;
- size_t service_name_len;
+ __kernel_size_t service_name_len;
};
/* NFC socket protocols */
diff --git a/original/uapi/linux/nfs4.h b/original/uapi/linux/nfs4.h
index ed5415e..800bb0f 100644
--- a/original/uapi/linux/nfs4.h
+++ b/original/uapi/linux/nfs4.h
@@ -178,9 +178,3 @@
#define NFS4_MAX_BACK_CHANNEL_OPS 2
#endif /* _UAPI_LINUX_NFS4_H */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/original/uapi/linux/nfsd/nfsfh.h b/original/uapi/linux/nfsd/nfsfh.h
deleted file mode 100644
index ff0ca88..0000000
--- a/original/uapi/linux/nfsd/nfsfh.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * This file describes the layout of the file handles as passed
- * over the wire.
- *
- * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de>
- */
-
-#ifndef _UAPI_LINUX_NFSD_FH_H
-#define _UAPI_LINUX_NFSD_FH_H
-
-#include <linux/types.h>
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs3.h>
-#include <linux/nfs4.h>
-
-/*
- * This is the old "dentry style" Linux NFSv2 file handle.
- *
- * The xino and xdev fields are currently used to transport the
- * ino/dev of the exported inode.
- */
-struct nfs_fhbase_old {
- __u32 fb_dcookie; /* dentry cookie - always 0xfeebbaca */
- __u32 fb_ino; /* our inode number */
- __u32 fb_dirino; /* dir inode number, 0 for directories */
- __u32 fb_dev; /* our device */
- __u32 fb_xdev;
- __u32 fb_xino;
- __u32 fb_generation;
-};
-
-/*
- * This is the new flexible, extensible style NFSv2/v3/v4 file handle.
- * by Neil Brown <neilb@cse.unsw.edu.au> - March 2000
- *
- * The file handle starts with a sequence of four-byte words.
- * The first word contains a version number (1) and three descriptor bytes
- * that tell how the remaining 3 variable length fields should be handled.
- * These three bytes are auth_type, fsid_type and fileid_type.
- *
- * All four-byte values are in host-byte-order.
- *
- * The auth_type field is deprecated and must be set to 0.
- *
- * The fsid_type identifies how the filesystem (or export point) is
- * encoded.
- * Current values:
- * 0 - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number
- * NOTE: we cannot use the kdev_t device id value, because kdev_t.h
- * says we mustn't. We must break it up and reassemble.
- * 1 - 4 byte user specified identifier
- * 2 - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED
- * 3 - 4 byte device id, encoded for user-space, 4 byte inode number
- * 4 - 4 byte inode number and 4 byte uuid
- * 5 - 8 byte uuid
- * 6 - 16 byte uuid
- * 7 - 8 byte inode number and 16 byte uuid
- *
- * The fileid_type identified how the file within the filesystem is encoded.
- * The values for this field are filesystem specific, exccept that
- * filesystems must not use the values '0' or '0xff'. 'See enum fid_type'
- * in include/linux/exportfs.h for currently registered values.
- */
-struct nfs_fhbase_new {
- __u8 fb_version; /* == 1, even => nfs_fhbase_old */
- __u8 fb_auth_type;
- __u8 fb_fsid_type;
- __u8 fb_fileid_type;
- __u32 fb_auth[1];
-/* __u32 fb_fsid[0]; floating */
-/* __u32 fb_fileid[0]; floating */
-};
-
-struct knfsd_fh {
- unsigned int fh_size; /* significant for NFSv3.
- * Points to the current size while building
- * a new file handle
- */
- union {
- struct nfs_fhbase_old fh_old;
- __u32 fh_pad[NFS4_FHSIZE/4];
- struct nfs_fhbase_new fh_new;
- } fh_base;
-};
-
-#define ofh_dcookie fh_base.fh_old.fb_dcookie
-#define ofh_ino fh_base.fh_old.fb_ino
-#define ofh_dirino fh_base.fh_old.fb_dirino
-#define ofh_dev fh_base.fh_old.fb_dev
-#define ofh_xdev fh_base.fh_old.fb_xdev
-#define ofh_xino fh_base.fh_old.fb_xino
-#define ofh_generation fh_base.fh_old.fb_generation
-
-#define fh_version fh_base.fh_new.fb_version
-#define fh_fsid_type fh_base.fh_new.fb_fsid_type
-#define fh_auth_type fh_base.fh_new.fb_auth_type
-#define fh_fileid_type fh_base.fh_new.fb_fileid_type
-#define fh_fsid fh_base.fh_new.fb_auth
-
-/* Do not use, provided for userspace compatiblity. */
-#define fh_auth fh_base.fh_new.fb_auth
-
-#endif /* _UAPI_LINUX_NFSD_FH_H */
diff --git a/original/uapi/linux/nitro_enclaves.h b/original/uapi/linux/nitro_enclaves.h
index b945073..e808f5b 100644
--- a/original/uapi/linux/nitro_enclaves.h
+++ b/original/uapi/linux/nitro_enclaves.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
- * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ * Copyright 2020-2021 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*/
#ifndef _UAPI_LINUX_NITRO_ENCLAVES_H_
@@ -60,7 +60,7 @@
*
* Context: Process context.
* Return:
- * * 0 - Logic succesfully completed.
+ * * 0 - Logic successfully completed.
* * -1 - There was a failure in the ioctl logic.
* On failure, errno is set to:
* * EFAULT - copy_from_user() / copy_to_user() failure.
@@ -95,7 +95,7 @@
*
* Context: Process context.
* Return:
- * * 0 - Logic succesfully completed.
+ * * 0 - Logic successfully completed.
* * -1 - There was a failure in the ioctl logic.
* On failure, errno is set to:
* * EFAULT - copy_from_user() / copy_to_user() failure.
@@ -118,7 +118,7 @@
*
* Context: Process context.
* Return:
- * * 0 - Logic succesfully completed.
+ * * 0 - Logic successfully completed.
* * -1 - There was a failure in the ioctl logic.
* On failure, errno is set to:
* * EFAULT - copy_from_user() failure.
@@ -161,7 +161,7 @@
*
* Context: Process context.
* Return:
- * * 0 - Logic succesfully completed.
+ * * 0 - Logic successfully completed.
* * -1 - There was a failure in the ioctl logic.
* On failure, errno is set to:
* * EFAULT - copy_from_user() / copy_to_user() failure.
diff --git a/original/uapi/linux/nl80211-vnd-intel.h b/original/uapi/linux/nl80211-vnd-intel.h
new file mode 100644
index 0000000..4ed7d0b
--- /dev/null
+++ b/original/uapi/linux/nl80211-vnd-intel.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012-2014, 2018-2021 Intel Corporation
+ * Copyright (C) 2013-2015 Intel Mobile Communications GmbH
+ * Copyright (C) 2016-2017 Intel Deutschland GmbH
+ */
+#ifndef __VENDOR_CMD_INTEL_H__
+#define __VENDOR_CMD_INTEL_H__
+
+#define INTEL_OUI 0x001735
+
+/**
+ * enum iwl_mvm_vendor_cmd - supported vendor commands
+ * @IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO: reports CSME connection info.
+ * @IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP: asks for ownership on the device.
+ * This is useful when the CSME firmware owns the device and the kernel
+ * wants to use it. In case the CSME firmware has no connection active the
+ * kernel will manage on its own to get ownership of the device.
+ * When the CSME firmware has an active connection, the user space
+ * involvement is required. The kernel will assert the RFKILL signal with
+ * the "device not owned" reason so that nobody can touch the device. Then
+ * the user space can run the following flow to be able to get connected
+ * to the very same AP the CSME firmware is currently connected to:
+ *
+ * 1) The user space (NetworkManager) boots and sees that the device is
+ * in RFKILL because the host doesn't own the device
+ * 2) The user space asks the kernel what AP the CSME firmware is
+ * connected to (with %IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO)
+ * 3) The user space checks if it has a profile that matches the reply
+ * from the CSME firmware
+ * 4) The user space installs a network to the wpa_supplicant with a
+ * specific BSSID and a specific frequency
+ * 5) The user space prevents any type of full scan
+ * 6) The user space asks iwlmei to request ownership on the device (with
+ * this command)
+ * 7) iwlmei requests ownership from the CSME firmware
+ * 8) The CSME firmware grants ownership
+ * 9) iwlmei tells iwlwifi to lift the RFKILL
+ * 10) RFKILL OFF is reported to user space
+ * 11) The host boots the device, loads the firwmare, and connects to a
+ * specific BSSID without scanning including IP as fast as it can
+ * 12) The host reports to the CSME firmware that there is a connection
+ * 13) The TCP connection is preserved and the host has connectivity
+ *
+ * @IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT: notifies if roaming is allowed.
+ * It contains a &IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN and a
+ * &IWL_MVM_VENDOR_ATTR_VIF_ADDR attributes.
+ */
+
+enum iwl_mvm_vendor_cmd {
+ IWL_MVM_VENDOR_CMD_GET_CSME_CONN_INFO = 0x2d,
+ IWL_MVM_VENDOR_CMD_HOST_GET_OWNERSHIP = 0x30,
+ IWL_MVM_VENDOR_CMD_ROAMING_FORBIDDEN_EVENT = 0x32,
+};
+
+enum iwl_vendor_auth_akm_mode {
+ IWL_VENDOR_AUTH_OPEN,
+ IWL_VENDOR_AUTH_RSNA = 0x6,
+ IWL_VENDOR_AUTH_RSNA_PSK,
+ IWL_VENDOR_AUTH_SAE = 0x9,
+ IWL_VENDOR_AUTH_MAX,
+};
+
+/**
+ * enum iwl_mvm_vendor_attr - attributes used in vendor commands
+ * @__IWL_MVM_VENDOR_ATTR_INVALID: attribute 0 is invalid
+ * @IWL_MVM_VENDOR_ATTR_VIF_ADDR: interface MAC address
+ * @IWL_MVM_VENDOR_ATTR_ADDR: MAC address
+ * @IWL_MVM_VENDOR_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @IWL_MVM_VENDOR_ATTR_STA_CIPHER: the cipher to use for the station with the
+ * mac address specified in &IWL_MVM_VENDOR_ATTR_ADDR.
+ * @IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN: u8 attribute. Indicates whether
+ * roaming is forbidden or not. Value 1 means roaming is forbidden,
+ * 0 mean roaming is allowed.
+ * @IWL_MVM_VENDOR_ATTR_AUTH_MODE: u32 attribute. Authentication mode type
+ * as specified in &enum iwl_vendor_auth_akm_mode.
+ * @IWL_MVM_VENDOR_ATTR_CHANNEL_NUM: u8 attribute. Contains channel number.
+ * @IWL_MVM_VENDOR_ATTR_BAND: u8 attribute.
+ * 0 for 2.4 GHz band, 1 for 5.2GHz band and 2 for 6GHz band.
+ * @IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL: u32 attribute. Channel number of
+ * collocated AP. Relevant for 6GHz AP info.
+ * @IWL_MVM_VENDOR_ATTR_COLLOC_ADDR: MAC address of a collocated AP.
+ * Relevant for 6GHz AP info.
+ *
+ * @NUM_IWL_MVM_VENDOR_ATTR: number of vendor attributes
+ * @MAX_IWL_MVM_VENDOR_ATTR: highest vendor attribute number
+
+ */
+enum iwl_mvm_vendor_attr {
+ __IWL_MVM_VENDOR_ATTR_INVALID = 0x00,
+ IWL_MVM_VENDOR_ATTR_VIF_ADDR = 0x02,
+ IWL_MVM_VENDOR_ATTR_ADDR = 0x0a,
+ IWL_MVM_VENDOR_ATTR_SSID = 0x3d,
+ IWL_MVM_VENDOR_ATTR_STA_CIPHER = 0x51,
+ IWL_MVM_VENDOR_ATTR_ROAMING_FORBIDDEN = 0x64,
+ IWL_MVM_VENDOR_ATTR_AUTH_MODE = 0x65,
+ IWL_MVM_VENDOR_ATTR_CHANNEL_NUM = 0x66,
+ IWL_MVM_VENDOR_ATTR_BAND = 0x69,
+ IWL_MVM_VENDOR_ATTR_COLLOC_CHANNEL = 0x70,
+ IWL_MVM_VENDOR_ATTR_COLLOC_ADDR = 0x71,
+
+ NUM_IWL_MVM_VENDOR_ATTR,
+ MAX_IWL_MVM_VENDOR_ATTR = NUM_IWL_MVM_VENDOR_ATTR - 1,
+};
+
+#endif /* __VENDOR_CMD_INTEL_H__ */
diff --git a/original/uapi/linux/nl80211.h b/original/uapi/linux/nl80211.h
index ac78da9..195a238 100644
--- a/original/uapi/linux/nl80211.h
+++ b/original/uapi/linux/nl80211.h
@@ -11,7 +11,7 @@
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
* Copyright 2008 Colin McCabe <colin@cozybit.com>
* Copyright 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -301,6 +301,29 @@
*/
/**
+ * DOC: FILS shared key crypto offload
+ *
+ * This feature is applicable to drivers running in AP mode.
+ *
+ * FILS shared key crypto offload can be advertised by drivers by setting
+ * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support
+ * FILS shared key crypto offload should be able to encrypt and decrypt
+ * association frames for FILS shared key authentication as per IEEE 802.11ai.
+ * With this capability, for FILS key derivation, drivers depend on userspace.
+ *
+ * After FILS key derivation, userspace shares the FILS AAD details with the
+ * driver and the driver stores the same to use in decryption of association
+ * request and in encryption of association response. The below parameters
+ * should be given to the driver in %NL80211_CMD_SET_FILS_AAD.
+ * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA
+ * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption
+ * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption
+ * (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
+ *
+ * Once the association is done, the driver cleans the FILS AAD data.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -337,7 +360,10 @@
* @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
* userspace to request deletion of a virtual interface, then requires
- * attribute %NL80211_ATTR_IFINDEX.
+ * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are
+ * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS,
+ * and if this command is used for the transmitting interface, then all
+ * the non-transmitting interfaces are deleted as well.
*
* @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
* by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
@@ -655,6 +681,9 @@
* When a security association was established on an 802.1X network using
* fast transition, this event should be followed by an
* %NL80211_CMD_PORT_AUTHORIZED event.
+ * Following a %NL80211_CMD_ROAM event userspace can issue
+ * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the
+ * new BSS the card/driver roamed to.
* @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
* userspace that a connection was dropped by the AP or due to other
* reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
@@ -1182,6 +1211,32 @@
* passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
* specify the wiphy index to be applied to.
*
+ * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever
+ * mac80211/drv detects a bss color collision.
+ *
+ * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that
+ * userspace wants to change the BSS color.
+ *
+ * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has
+ * started
+ *
+ * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has
+ * been aborted
+ *
+ * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
+ * has completed
+ *
+ * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using -
+ * &NL80211_ATTR_MAC - for STA MAC address
+ * &NL80211_ATTR_FILS_KEK - for KEK
+ * &NL80211_ATTR_FILS_NONCES - for FILS Nonces
+ * (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
+ *
+ * @NL80211_CMD_ASSOC_COMEBACK: notification about an association
+ * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC
+ * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to
+ * specify the timeout value.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1414,6 +1469,18 @@
NL80211_CMD_SET_SAR_SPECS,
+ NL80211_CMD_OBSS_COLOR_COLLISION,
+
+ NL80211_CMD_COLOR_CHANGE_REQUEST,
+
+ NL80211_CMD_COLOR_CHANGE_STARTED,
+ NL80211_CMD_COLOR_CHANGE_ABORTED,
+ NL80211_CMD_COLOR_CHANGE_COMPLETED,
+
+ NL80211_CMD_SET_FILS_AAD,
+
+ NL80211_CMD_ASSOC_COMEBACK,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2410,7 +2477,9 @@
* space supports external authentication. This attribute shall be used
* with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
* may offload authentication processing to user space if this capability
- * is indicated in the respective requests from the user space.
+ * is indicated in the respective requests from the user space. (This flag
+ * attribute deprecated for %NL80211_CMD_START_AP, use
+ * %NL80211_ATTR_AP_SETTINGS_FLAGS)
*
* @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this
* u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
@@ -2557,6 +2626,39 @@
* disassoc events to indicate that an immediate reconnect to the AP
* is desired.
*
+ * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the
+ * %NL80211_CMD_OBSS_COLOR_COLLISION event.
+ *
+ * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's
+ * until the color switch event.
+ * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are
+ * switching to
+ * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE
+ * information for the time while performing a color switch.
+ *
+ * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID
+ * advertisements (MBSSID) parameters in AP mode.
+ * Kernel uses this attribute to indicate the driver's support for MBSSID
+ * and enhanced multi-BSSID advertisements (EMA AP) to the userspace.
+ * Userspace should use this attribute to configure per interface MBSSID
+ * parameters.
+ * See &enum nl80211_mbssid_config_attributes for details.
+ *
+ * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements.
+ * Mandatory parameter for the transmitting interface to enable MBSSID.
+ * Optional for the non-transmitting interfaces.
+ *
+ * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain
+ * available for radar/CAC detection on some hw. This chain can't be used
+ * to transmit or receive frames and it is bounded to a running wdev.
+ * Background radar/CAC detection allows to avoid the CAC downtime
+ * switching on a different channel during CAC detection on the selected
+ * radar channel.
+ *
+ * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags,
+ * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be
+ * used with %NL80211_CMD_START_AP request.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3054,6 +3156,19 @@
NL80211_ATTR_DISABLE_HE,
+ NL80211_ATTR_OBSS_COLOR_BITMAP,
+
+ NL80211_ATTR_COLOR_CHANGE_COUNT,
+ NL80211_ATTR_COLOR_CHANGE_COLOR,
+ NL80211_ATTR_COLOR_CHANGE_ELEMS,
+
+ NL80211_ATTR_MBSSID_CONFIG,
+ NL80211_ATTR_MBSSID_ELEMS,
+
+ NL80211_ATTR_RADAR_BACKGROUND,
+
+ NL80211_ATTR_AP_SETTINGS_FLAGS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3647,11 +3762,12 @@
* capabilities IE
* @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
* defined in HE capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
- * defined
* @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
* given for all 6 GHz band channels
+ * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are
+ * advertised on this band/for this iftype (binary)
* @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
+ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined
*/
enum nl80211_band_iftype_attr {
__NL80211_BAND_IFTYPE_ATTR_INVALID,
@@ -3662,6 +3778,7 @@
NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
+ NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,
/* keep last */
__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
@@ -4884,6 +5001,7 @@
* @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
* @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
* @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
+ * @NL80211_BAND_LC: light communication band (placeholder)
* @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
* since newer kernel versions may support more bands
*/
@@ -4893,6 +5011,7 @@
NL80211_BAND_60GHZ,
NL80211_BAND_6GHZ,
NL80211_BAND_S1GHZ,
+ NL80211_BAND_LC,
NUM_NL80211_BANDS,
};
@@ -5459,7 +5578,7 @@
* => allows 8 of AP/GO that can have BI gcd >= min gcd
*
* numbers = [ #{STA} <= 2 ], channels = 2, max = 2
- * => allows two STAs on different channels
+ * => allows two STAs on the same or on different channels
*
* numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
* => allows a STA plus three P2P interfaces
@@ -5504,7 +5623,7 @@
* @NL80211_PLINK_ESTAB: mesh peer link is established
* @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
* @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
- * plink are discarded
+ * plink are discarded, except for authentication frames
* @NUM_NL80211_PLINK_STATES: number of peer link states
* @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
*/
@@ -5641,13 +5760,15 @@
NL80211_TDLS_DISABLE_LINK,
};
-/*
+/**
* enum nl80211_ap_sme_features - device-integrated AP features
- * Reserved for future use, no bits are defined in
- * NL80211_ATTR_DEVICE_AP_SME yet.
-enum nl80211_ap_sme_features {
-};
+ * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver
+ * when user space indicates support for SA Query procedures offload during
+ * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT.
*/
+enum nl80211_ap_sme_features {
+ NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0,
+};
/**
* enum nl80211_feature_flags - device/driver features
@@ -5937,6 +6058,27 @@
* @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate
* configuration (AP/mesh) with HE rates.
*
+ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement
+ * exchange protocol.
+ *
+ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement
+ * exchange protocol.
+ *
+ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management
+ * frame protection for all management frames exchanged during the
+ * negotiation and range measurement procedure.
+ *
+ * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
+ * detection and change announcemnts.
+ *
+ * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports
+ * FILS encryption and decryption for (Re)Association Request and Response
+ * frames. Userspace has to share FILS AAD details to the driver by using
+ * @NL80211_CMD_SET_FILS_AAD.
+ *
+ * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC
+ * detection.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5998,6 +6140,12 @@
NL80211_EXT_FEATURE_FILS_DISCOVERY,
NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
NL80211_EXT_FEATURE_BEACON_RATE_HE,
+ NL80211_EXT_FEATURE_SECURE_LTF,
+ NL80211_EXT_FEATURE_SECURE_RTT,
+ NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ NL80211_EXT_FEATURE_BSS_COLOR,
+ NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
+ NL80211_EXT_FEATURE_RADAR_BACKGROUND,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -6295,11 +6443,13 @@
* @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
* @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
* @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable.
*/
enum nl80211_tdls_peer_capability {
NL80211_TDLS_PEER_HT = 1<<0,
NL80211_TDLS_PEER_VHT = 1<<1,
NL80211_TDLS_PEER_WMM = 1<<2,
+ NL80211_TDLS_PEER_HE = 1<<3,
};
/**
@@ -6891,6 +7041,12 @@
* if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
* %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
* ranging will be used.
+ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
+ * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+ * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the
+ * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED
+ * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set.
*
* @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
* @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
@@ -6909,6 +7065,8 @@
NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
+ NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR,
/* keep last */
NUM_NL80211_PMSR_FTM_REQ_ATTR,
@@ -7277,4 +7435,76 @@
NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
};
+/**
+ * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced
+ * multi-BSSID advertisements (EMA) in AP mode.
+ * Kernel uses some of these attributes to advertise driver's support for
+ * MBSSID and EMA.
+ * Remaining attributes should be used by the userspace to configure the
+ * features.
+ *
+ * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise
+ * the maximum number of MBSSID interfaces supported by the driver.
+ * Driver should indicate MBSSID support by setting
+ * wiphy->mbssid_max_interfaces to a value more than or equal to 2.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel
+ * to advertise the maximum profile periodicity supported by the driver
+ * if EMA is enabled. Driver should indicate EMA support to the userspace
+ * by setting wiphy->ema_max_profile_periodicity to
+ * a non-zero value.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of
+ * this BSS (u8) in the multiple BSSID set.
+ * Value must be set to 0 for the transmitting interface and non-zero for
+ * all non-transmitting interfaces. The userspace will be responsible
+ * for using unique indices for the interfaces.
+ * Range: 0 to wiphy->mbssid_max_interfaces-1.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for
+ * a non-transmitted profile which provides the interface index (u32) of
+ * the transmitted profile. The value must match one of the interface
+ * indices advertised by the kernel. Optional if the interface being set up
+ * is the transmitting one, however, if provided then the value must match
+ * the interface index of the same.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature.
+ * Setting this flag is permitted only if the driver advertises EMA support
+ * by setting wiphy->ema_max_profile_periodicity to non-zero.
+ *
+ * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
+ */
+enum nl80211_mbssid_config_attributes {
+ __NL80211_MBSSID_CONFIG_ATTR_INVALID,
+
+ NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES,
+ NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY,
+ NL80211_MBSSID_CONFIG_ATTR_INDEX,
+ NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX,
+ NL80211_MBSSID_CONFIG_ATTR_EMA,
+
+ /* keep last */
+ __NL80211_MBSSID_CONFIG_ATTR_LAST,
+ NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_ap_settings_flags - AP settings flags
+ *
+ * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external
+ * authentication.
+ * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query
+ * procedures offload to driver. If driver advertises
+ * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall
+ * ignore SA Query procedures and validations when this flag is set by
+ * userspace.
+ */
+enum nl80211_ap_settings_flags {
+ NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0,
+ NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/original/uapi/linux/openvswitch.h b/original/uapi/linux/openvswitch.h
index 8d16744..150bcff 100644
--- a/original/uapi/linux/openvswitch.h
+++ b/original/uapi/linux/openvswitch.h
@@ -70,6 +70,8 @@
* set on the datapath port (for OVS_ACTION_ATTR_MISS). Only valid on
* %OVS_DP_CMD_NEW requests. A value of zero indicates that upcalls should
* not be sent.
+ * @OVS_DP_ATTR_PER_CPU_PIDS: Per-cpu array of PIDs for upcalls when
+ * OVS_DP_F_DISPATCH_UPCALL_PER_CPU feature is set.
* @OVS_DP_ATTR_STATS: Statistics about packets that have passed through the
* datapath. Always present in notifications.
* @OVS_DP_ATTR_MEGAFLOW_STATS: Statistics about mega flow masks usage for the
@@ -87,6 +89,9 @@
OVS_DP_ATTR_USER_FEATURES, /* OVS_DP_F_* */
OVS_DP_ATTR_PAD,
OVS_DP_ATTR_MASKS_CACHE_SIZE,
+ OVS_DP_ATTR_PER_CPU_PIDS, /* Netlink PIDS to receive upcalls in
+ * per-cpu dispatch mode
+ */
__OVS_DP_ATTR_MAX
};
@@ -127,6 +132,9 @@
/* Allow tc offload recirc sharing */
#define OVS_DP_F_TC_RECIRC_SHARING (1 << 2)
+/* Allow per-cpu dispatch of upcalls */
+#define OVS_DP_F_DISPATCH_UPCALL_PER_CPU (1 << 3)
+
/* Fixed logical ports. */
#define OVSP_LOCAL ((__u32)0)
diff --git a/original/uapi/linux/pci_regs.h b/original/uapi/linux/pci_regs.h
index e709ae8..bee1a9e 100644
--- a/original/uapi/linux/pci_regs.h
+++ b/original/uapi/linux/pci_regs.h
@@ -301,23 +301,23 @@
#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */
#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
-/* Message Signalled Interrupt registers */
+/* Message Signaled Interrupt registers */
-#define PCI_MSI_FLAGS 2 /* Message Control */
+#define PCI_MSI_FLAGS 0x02 /* Message Control */
#define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */
#define PCI_MSI_FLAGS_QMASK 0x000e /* Maximum queue size available */
#define PCI_MSI_FLAGS_QSIZE 0x0070 /* Message queue size configured */
#define PCI_MSI_FLAGS_64BIT 0x0080 /* 64-bit addresses allowed */
#define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */
#define PCI_MSI_RFU 3 /* Rest of capability flags */
-#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
-#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
-#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
-#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */
-#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */
-#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
-#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */
-#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */
+#define PCI_MSI_ADDRESS_LO 0x04 /* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI 0x08 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32 0x08 /* 16 bits of data for 32-bit devices */
+#define PCI_MSI_MASK_32 0x0c /* Mask bits register for 32-bit devices */
+#define PCI_MSI_PENDING_32 0x10 /* Pending intrs for 32-bit devices */
+#define PCI_MSI_DATA_64 0x0c /* 16 bits of data for 64-bit devices */
+#define PCI_MSI_MASK_64 0x10 /* Mask bits register for 64-bit devices */
+#define PCI_MSI_PENDING_64 0x14 /* Pending intrs for 64-bit devices */
/* MSI-X registers (in MSI-X capability) */
#define PCI_MSIX_FLAGS 2 /* Message Control */
@@ -335,10 +335,10 @@
/* MSI-X Table entry format (in memory mapped by a BAR) */
#define PCI_MSIX_ENTRY_SIZE 16
-#define PCI_MSIX_ENTRY_LOWER_ADDR 0 /* Message Address */
-#define PCI_MSIX_ENTRY_UPPER_ADDR 4 /* Message Upper Address */
-#define PCI_MSIX_ENTRY_DATA 8 /* Message Data */
-#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 /* Vector Control */
+#define PCI_MSIX_ENTRY_LOWER_ADDR 0x0 /* Message Address */
+#define PCI_MSIX_ENTRY_UPPER_ADDR 0x4 /* Message Upper Address */
+#define PCI_MSIX_ENTRY_DATA 0x8 /* Message Data */
+#define PCI_MSIX_ENTRY_VECTOR_CTRL 0xc /* Vector Control */
#define PCI_MSIX_ENTRY_CTRL_MASKBIT 0x00000001
/* CompactPCI Hotswap Register */
@@ -470,7 +470,7 @@
/* PCI Express capability registers */
-#define PCI_EXP_FLAGS 2 /* Capabilities register */
+#define PCI_EXP_FLAGS 0x02 /* Capabilities register */
#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */
#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */
#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */
@@ -484,7 +484,7 @@
#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
-#define PCI_EXP_DEVCAP 4 /* Device capabilities */
+#define PCI_EXP_DEVCAP 0x04 /* Device capabilities */
#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */
#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */
#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */
@@ -497,13 +497,19 @@
#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */
#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */
#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
-#define PCI_EXP_DEVCTL 8 /* Device Control */
+#define PCI_EXP_DEVCTL 0x08 /* Device Control */
#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */
#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */
#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */
#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */
#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */
+#define PCI_EXP_DEVCTL_PAYLOAD_128B 0x0000 /* 128 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_256B 0x0020 /* 256 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_512B 0x0040 /* 512 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_1024B 0x0060 /* 1024 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_2048B 0x0080 /* 2048 Bytes */
+#define PCI_EXP_DEVCTL_PAYLOAD_4096B 0x00a0 /* 4096 Bytes */
#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */
#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */
#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */
@@ -516,7 +522,7 @@
#define PCI_EXP_DEVCTL_READRQ_2048B 0x4000 /* 2048 Bytes */
#define PCI_EXP_DEVCTL_READRQ_4096B 0x5000 /* 4096 Bytes */
#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
-#define PCI_EXP_DEVSTA 10 /* Device Status */
+#define PCI_EXP_DEVSTA 0x0a /* Device Status */
#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */
#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */
#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */
@@ -524,7 +530,7 @@
#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */
#define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */
#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V1 12 /* v1 endpoints without link end here */
-#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
+#define PCI_EXP_LNKCAP 0x0c /* Link Capabilities */
#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */
#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */
#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
@@ -543,7 +549,7 @@
#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */
#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
-#define PCI_EXP_LNKCTL 16 /* Link Control */
+#define PCI_EXP_LNKCTL 0x10 /* Link Control */
#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */
#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */
#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */
@@ -556,7 +562,7 @@
#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */
-#define PCI_EXP_LNKSTA 18 /* Link Status */
+#define PCI_EXP_LNKSTA 0x12 /* Link Status */
#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */
#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
@@ -576,7 +582,7 @@
#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */
#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints with link end here */
-#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
+#define PCI_EXP_SLTCAP 0x14 /* Slot Capabilities */
#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */
#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */
#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */
@@ -589,7 +595,7 @@
#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */
#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */
#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
-#define PCI_EXP_SLTCTL 24 /* Slot Control */
+#define PCI_EXP_SLTCTL 0x18 /* Slot Control */
#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */
#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */
#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */
@@ -611,7 +617,7 @@
#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
#define PCI_EXP_SLTCTL_IBPD_DISABLE 0x4000 /* In-band PD disable */
-#define PCI_EXP_SLTSTA 26 /* Slot Status */
+#define PCI_EXP_SLTSTA 0x1a /* Slot Status */
#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */
#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */
#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */
@@ -621,15 +627,15 @@
#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */
#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */
#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */
-#define PCI_EXP_RTCTL 28 /* Root Control */
+#define PCI_EXP_RTCTL 0x1c /* Root Control */
#define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */
#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */
#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */
#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */
#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */
-#define PCI_EXP_RTCAP 30 /* Root Capabilities */
+#define PCI_EXP_RTCAP 0x1e /* Root Capabilities */
#define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */
-#define PCI_EXP_RTSTA 32 /* Root Status */
+#define PCI_EXP_RTSTA 0x20 /* Root Status */
#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */
#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */
/*
@@ -640,7 +646,7 @@
* Use pcie_capability_read_word() and similar interfaces to use them
* safely.
*/
-#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
+#define PCI_EXP_DEVCAP2 0x24 /* Device Capabilities 2 */
#define PCI_EXP_DEVCAP2_COMP_TMOUT_DIS 0x00000010 /* Completion Timeout Disable supported */
#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */
#define PCI_EXP_DEVCAP2_ATOMIC_ROUTE 0x00000040 /* Atomic Op routing */
@@ -652,7 +658,7 @@
#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */
#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */
#define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */
-#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
+#define PCI_EXP_DEVCTL2 0x28 /* Device Control 2 */
#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */
#define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */
#define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */
@@ -664,9 +670,9 @@
#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */
#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */
#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
-#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */
-#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */
-#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */
+#define PCI_EXP_DEVSTA2 0x2a /* Device Status 2 */
+#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 0x2c /* end of v2 EPs w/o link */
+#define PCI_EXP_LNKCAP2 0x2c /* Link Capabilities 2 */
#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */
#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */
#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */
@@ -674,7 +680,7 @@
#define PCI_EXP_LNKCAP2_SLS_32_0GB 0x00000020 /* Supported Speed 32GT/s */
#define PCI_EXP_LNKCAP2_SLS_64_0GB 0x00000040 /* Supported Speed 64GT/s */
#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */
-#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
+#define PCI_EXP_LNKCTL2 0x30 /* Link Control 2 */
#define PCI_EXP_LNKCTL2_TLS 0x000f
#define PCI_EXP_LNKCTL2_TLS_2_5GT 0x0001 /* Supported Speed 2.5GT/s */
#define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */
@@ -685,12 +691,12 @@
#define PCI_EXP_LNKCTL2_ENTER_COMP 0x0010 /* Enter Compliance */
#define PCI_EXP_LNKCTL2_TX_MARGIN 0x0380 /* Transmit Margin */
#define PCI_EXP_LNKCTL2_HASD 0x0020 /* HW Autonomous Speed Disable */
-#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
-#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
+#define PCI_EXP_LNKSTA2 0x32 /* Link Status 2 */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 0x32 /* end of v2 EPs w/ link */
+#define PCI_EXP_SLTCAP2 0x34 /* Slot Capabilities 2 */
#define PCI_EXP_SLTCAP2_IBPD 0x00000001 /* In-band PD Disable Supported */
-#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
-#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */
+#define PCI_EXP_SLTCTL2 0x38 /* Slot Control 2 */
+#define PCI_EXP_SLTSTA2 0x3a /* Slot Status 2 */
/* Extended Capabilities (PCI-X 2.0 and Express) */
#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
@@ -736,7 +742,7 @@
#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40
/* Advanced Error Reporting */
-#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
+#define PCI_ERR_UNCOR_STATUS 0x04 /* Uncorrectable Error Status */
#define PCI_ERR_UNC_UND 0x00000001 /* Undefined */
#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */
#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */
@@ -754,11 +760,11 @@
#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */
#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */
#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */
-#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */
+#define PCI_ERR_UNCOR_MASK 0x08 /* Uncorrectable Error Mask */
/* Same bits as above */
-#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */
+#define PCI_ERR_UNCOR_SEVER 0x0c /* Uncorrectable Error Severity */
/* Same bits as above */
-#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */
+#define PCI_ERR_COR_STATUS 0x10 /* Correctable Error Status */
#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */
#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */
#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */
@@ -767,20 +773,20 @@
#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */
#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */
#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */
-#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */
+#define PCI_ERR_COR_MASK 0x14 /* Correctable Error Mask */
/* Same bits as above */
-#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */
-#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */
+#define PCI_ERR_CAP 0x18 /* Advanced Error Capabilities & Ctrl*/
+#define PCI_ERR_CAP_FEP(x) ((x) & 0x1f) /* First Error Pointer */
#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */
#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */
#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */
#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */
-#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */
-#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */
+#define PCI_ERR_HEADER_LOG 0x1c /* Header Log Register (16 bytes) */
+#define PCI_ERR_ROOT_COMMAND 0x2c /* Root Error Command */
#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */
#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 /* Non-Fatal Err Reporting Enable */
#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 /* Fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_STATUS 48
+#define PCI_ERR_ROOT_STATUS 0x30
#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 /* Multiple ERR_COR */
#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 /* ERR_FATAL/NONFATAL */
@@ -789,52 +795,52 @@
#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */
#define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */
-#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */
+#define PCI_ERR_ROOT_ERR_SRC 0x34 /* Error Source Identification */
/* Virtual Channel */
-#define PCI_VC_PORT_CAP1 4
+#define PCI_VC_PORT_CAP1 0x04
#define PCI_VC_CAP1_EVCC 0x00000007 /* extended VC count */
#define PCI_VC_CAP1_LPEVCC 0x00000070 /* low prio extended VC count */
#define PCI_VC_CAP1_ARB_SIZE 0x00000c00
-#define PCI_VC_PORT_CAP2 8
+#define PCI_VC_PORT_CAP2 0x08
#define PCI_VC_CAP2_32_PHASE 0x00000002
#define PCI_VC_CAP2_64_PHASE 0x00000004
#define PCI_VC_CAP2_128_PHASE 0x00000008
#define PCI_VC_CAP2_ARB_OFF 0xff000000
-#define PCI_VC_PORT_CTRL 12
+#define PCI_VC_PORT_CTRL 0x0c
#define PCI_VC_PORT_CTRL_LOAD_TABLE 0x00000001
-#define PCI_VC_PORT_STATUS 14
+#define PCI_VC_PORT_STATUS 0x0e
#define PCI_VC_PORT_STATUS_TABLE 0x00000001
-#define PCI_VC_RES_CAP 16
+#define PCI_VC_RES_CAP 0x10
#define PCI_VC_RES_CAP_32_PHASE 0x00000002
#define PCI_VC_RES_CAP_64_PHASE 0x00000004
#define PCI_VC_RES_CAP_128_PHASE 0x00000008
#define PCI_VC_RES_CAP_128_PHASE_TB 0x00000010
#define PCI_VC_RES_CAP_256_PHASE 0x00000020
#define PCI_VC_RES_CAP_ARB_OFF 0xff000000
-#define PCI_VC_RES_CTRL 20
+#define PCI_VC_RES_CTRL 0x14
#define PCI_VC_RES_CTRL_LOAD_TABLE 0x00010000
#define PCI_VC_RES_CTRL_ARB_SELECT 0x000e0000
#define PCI_VC_RES_CTRL_ID 0x07000000
#define PCI_VC_RES_CTRL_ENABLE 0x80000000
-#define PCI_VC_RES_STATUS 26
+#define PCI_VC_RES_STATUS 0x1a
#define PCI_VC_RES_STATUS_TABLE 0x00000001
#define PCI_VC_RES_STATUS_NEGO 0x00000002
#define PCI_CAP_VC_BASE_SIZEOF 0x10
-#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C
+#define PCI_CAP_VC_PER_VC_SIZEOF 0x0c
/* Power Budgeting */
-#define PCI_PWR_DSR 4 /* Data Select Register */
-#define PCI_PWR_DATA 8 /* Data Register */
+#define PCI_PWR_DSR 0x04 /* Data Select Register */
+#define PCI_PWR_DATA 0x08 /* Data Register */
#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */
#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */
#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */
#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */
#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */
-#define PCI_PWR_CAP 12 /* Capability */
+#define PCI_PWR_CAP 0x0c /* Capability */
#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
-#define PCI_EXT_CAP_PWR_SIZEOF 16
+#define PCI_EXT_CAP_PWR_SIZEOF 0x10
/* Root Complex Event Collector Endpoint Association */
#define PCI_RCEC_RCIEP_BITMAP 4 /* Associated Bitmap for RCiEPs */
@@ -958,7 +964,7 @@
#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */
#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */
-#define PCI_EXT_CAP_SRIOV_SIZEOF 64
+#define PCI_EXT_CAP_SRIOV_SIZEOF 0x40
#define PCI_LTR_MAX_SNOOP_LAT 0x4
#define PCI_LTR_MAX_NOSNOOP_LAT 0x6
@@ -1011,12 +1017,12 @@
#define PCI_TPH_LOC_NONE 0x000 /* no location */
#define PCI_TPH_LOC_CAP 0x200 /* in capability */
#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */
-#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */
-#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */
-#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */
+#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* ST table mask */
+#define PCI_TPH_CAP_ST_SHIFT 16 /* ST table shift */
+#define PCI_TPH_BASE_SIZEOF 0xc /* size with no ST table */
/* Downstream Port Containment */
-#define PCI_EXP_DPC_CAP 4 /* DPC Capability */
+#define PCI_EXP_DPC_CAP 0x04 /* DPC Capability */
#define PCI_EXP_DPC_IRQ 0x001F /* Interrupt Message Number */
#define PCI_EXP_DPC_CAP_RP_EXT 0x0020 /* Root Port Extensions */
#define PCI_EXP_DPC_CAP_POISONED_TLP 0x0040 /* Poisoned TLP Egress Blocking Supported */
@@ -1024,19 +1030,19 @@
#define PCI_EXP_DPC_RP_PIO_LOG_SIZE 0x0F00 /* RP PIO Log Size */
#define PCI_EXP_DPC_CAP_DL_ACTIVE 0x1000 /* ERR_COR signal on DL_Active supported */
-#define PCI_EXP_DPC_CTL 6 /* DPC control */
+#define PCI_EXP_DPC_CTL 0x06 /* DPC control */
#define PCI_EXP_DPC_CTL_EN_FATAL 0x0001 /* Enable trigger on ERR_FATAL message */
#define PCI_EXP_DPC_CTL_EN_NONFATAL 0x0002 /* Enable trigger on ERR_NONFATAL message */
#define PCI_EXP_DPC_CTL_INT_EN 0x0008 /* DPC Interrupt Enable */
-#define PCI_EXP_DPC_STATUS 8 /* DPC Status */
+#define PCI_EXP_DPC_STATUS 0x08 /* DPC Status */
#define PCI_EXP_DPC_STATUS_TRIGGER 0x0001 /* Trigger Status */
#define PCI_EXP_DPC_STATUS_TRIGGER_RSN 0x0006 /* Trigger Reason */
#define PCI_EXP_DPC_STATUS_INTERRUPT 0x0008 /* Interrupt Status */
#define PCI_EXP_DPC_RP_BUSY 0x0010 /* Root Port Busy */
#define PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT 0x0060 /* Trig Reason Extension */
-#define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */
+#define PCI_EXP_DPC_SOURCE_ID 0x0A /* DPC Source Identifier */
#define PCI_EXP_DPC_RP_PIO_STATUS 0x0C /* RP PIO Status */
#define PCI_EXP_DPC_RP_PIO_MASK 0x10 /* RP PIO Mask */
@@ -1080,7 +1086,11 @@
/* Designated Vendor-Specific (DVSEC, PCI_EXT_CAP_ID_DVSEC) */
#define PCI_DVSEC_HEADER1 0x4 /* Designated Vendor-Specific Header1 */
+#define PCI_DVSEC_HEADER1_VID(x) ((x) & 0xffff)
+#define PCI_DVSEC_HEADER1_REV(x) (((x) >> 16) & 0xf)
+#define PCI_DVSEC_HEADER1_LEN(x) (((x) >> 20) & 0xfff)
#define PCI_DVSEC_HEADER2 0x8 /* Designated Vendor-Specific Header2 */
+#define PCI_DVSEC_HEADER2_ID(x) ((x) & 0xffff)
/* Data Link Feature */
#define PCI_DLF_CAP 0x04 /* Capabilities Register */
diff --git a/original/uapi/linux/pcitest.h b/original/uapi/linux/pcitest.h
index c3ab4c8..f9c1af8 100644
--- a/original/uapi/linux/pcitest.h
+++ b/original/uapi/linux/pcitest.h
@@ -1,5 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/**
+/*
* pcitest.h - PCI test uapi defines
*
* Copyright (C) 2017 Texas Instruments
diff --git a/original/uapi/linux/perf_event.h b/original/uapi/linux/perf_event.h
index ad15e40..82858b6 100644
--- a/original/uapi/linux/perf_event.h
+++ b/original/uapi/linux/perf_event.h
@@ -38,6 +38,21 @@
};
/*
+ * attr.config layout for type PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
+ * PERF_TYPE_HARDWARE: 0xEEEEEEEE000000AA
+ * AA: hardware event ID
+ * EEEEEEEE: PMU type ID
+ * PERF_TYPE_HW_CACHE: 0xEEEEEEEE00DDCCBB
+ * BB: hardware cache ID
+ * CC: hardware cache op ID
+ * DD: hardware cache op result ID
+ * EEEEEEEE: PMU type ID
+ * If the PMU type ID is 0, the PERF_TYPE_RAW will be applied.
+ */
+#define PERF_PMU_TYPE_SHIFT 32
+#define PERF_HW_EVENT_MASK 0xffffffff
+
+/*
* Generalized performance event event_id types, used by the
* attr.event_id parameter of the sys_perf_event_open()
* syscall:
@@ -112,6 +127,7 @@
PERF_COUNT_SW_EMULATION_FAULTS = 8,
PERF_COUNT_SW_DUMMY = 9,
PERF_COUNT_SW_BPF_OUTPUT = 10,
+ PERF_COUNT_SW_CGROUP_SWITCHES = 11,
PERF_COUNT_SW_MAX, /* non-ABI */
};
@@ -311,6 +327,7 @@
#define PERF_ATTR_SIZE_VER4 104 /* add: sample_regs_intr */
#define PERF_ATTR_SIZE_VER5 112 /* add: aux_watermark */
#define PERF_ATTR_SIZE_VER6 120 /* add: aux_sample_size */
+#define PERF_ATTR_SIZE_VER7 128 /* add: sig_data */
/*
* Hardware event_id to monitor via a performance monitoring event:
@@ -389,7 +406,10 @@
cgroup : 1, /* include cgroup events */
text_poke : 1, /* include text poke events */
build_id : 1, /* use build id in mmap2 events */
- __reserved_1 : 29;
+ inherit_thread : 1, /* children only inherit if cloned with CLONE_THREAD */
+ remove_on_exec : 1, /* event is removed from task on exec */
+ sigtrap : 1, /* send synchronous SIGTRAP on event */
+ __reserved_1 : 26;
union {
__u32 wakeup_events; /* wakeup every n events */
@@ -441,6 +461,14 @@
__u16 __reserved_2;
__u32 aux_sample_size;
__u32 __reserved_3;
+
+ /*
+ * User provided data if sigtrap=1, passed back to user via
+ * siginfo_t::si_perf_data, e.g. to permit user to identify the event.
+ * Note, siginfo_t::si_perf_data is long-sized, and sig_data will be
+ * truncated accordingly on 32 bit architectures.
+ */
+ __u64 sig_data;
};
/*
@@ -1115,6 +1143,21 @@
*/
PERF_RECORD_TEXT_POKE = 20,
+ /*
+ * Data written to the AUX area by hardware due to aux_output, may need
+ * to be matched to the event by an architecture-specific hardware ID.
+ * This records the hardware ID, but requires sample_id to provide the
+ * event ID. e.g. Intel PT uses this record to disambiguate PEBS-via-PT
+ * records from multiple events.
+ *
+ * struct {
+ * struct perf_event_header header;
+ * u64 hw_id;
+ * struct sample_id sample_id;
+ * };
+ */
+ PERF_RECORD_AUX_OUTPUT_HW_ID = 21,
+
PERF_RECORD_MAX, /* non-ABI */
};
@@ -1156,10 +1199,15 @@
/**
* PERF_RECORD_AUX::flags bits
*/
-#define PERF_AUX_FLAG_TRUNCATED 0x01 /* record was truncated to fit */
-#define PERF_AUX_FLAG_OVERWRITE 0x02 /* snapshot from overwrite mode */
-#define PERF_AUX_FLAG_PARTIAL 0x04 /* record contains gaps */
-#define PERF_AUX_FLAG_COLLISION 0x08 /* sample collided with another */
+#define PERF_AUX_FLAG_TRUNCATED 0x01 /* record was truncated to fit */
+#define PERF_AUX_FLAG_OVERWRITE 0x02 /* snapshot from overwrite mode */
+#define PERF_AUX_FLAG_PARTIAL 0x04 /* record contains gaps */
+#define PERF_AUX_FLAG_COLLISION 0x08 /* sample collided with another */
+#define PERF_AUX_FLAG_PMU_FORMAT_TYPE_MASK 0xff00 /* PMU specific trace format type */
+
+/* CoreSight PMU AUX buffer formats */
+#define PERF_AUX_FLAG_CORESIGHT_FORMAT_CORESIGHT 0x0000 /* Default for backward compatibility */
+#define PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW 0x0100 /* Raw format of the source */
#define PERF_FLAG_FD_NO_GROUP (1UL << 0)
#define PERF_FLAG_FD_OUTPUT (1UL << 1)
@@ -1179,14 +1227,16 @@
mem_remote:1, /* remote */
mem_snoopx:2, /* snoop mode, ext */
mem_blk:3, /* access blocked */
- mem_rsvd:21;
+ mem_hops:3, /* hop level */
+ mem_rsvd:18;
};
};
#elif defined(__BIG_ENDIAN_BITFIELD)
union perf_mem_data_src {
__u64 val;
struct {
- __u64 mem_rsvd:21,
+ __u64 mem_rsvd:18,
+ mem_hops:3, /* hop level */
mem_blk:3, /* access blocked */
mem_snoopx:2, /* snoop mode, ext */
mem_remote:1, /* remote */
@@ -1210,7 +1260,13 @@
#define PERF_MEM_OP_EXEC 0x10 /* code (execution) */
#define PERF_MEM_OP_SHIFT 0
-/* memory hierarchy (memory level, hit or miss) */
+/*
+ * PERF_MEM_LVL_* namespace being depricated to some extent in the
+ * favour of newer composite PERF_MEM_{LVLNUM_,REMOTE_,SNOOPX_} fields.
+ * Supporting this namespace inorder to not break defined ABIs.
+ *
+ * memory hierarchy (memory level, hit or miss)
+ */
#define PERF_MEM_LVL_NA 0x01 /* not available */
#define PERF_MEM_LVL_HIT 0x02 /* hit level */
#define PERF_MEM_LVL_MISS 0x04 /* miss level */
@@ -1276,6 +1332,14 @@
#define PERF_MEM_BLK_ADDR 0x04 /* address conflict */
#define PERF_MEM_BLK_SHIFT 40
+/* hop level */
+#define PERF_MEM_HOPS_0 0x01 /* remote core, same node */
+#define PERF_MEM_HOPS_1 0x02 /* remote node, same socket */
+#define PERF_MEM_HOPS_2 0x03 /* remote socket, same board */
+#define PERF_MEM_HOPS_3 0x04 /* remote board */
+/* 5-7 available */
+#define PERF_MEM_HOPS_SHIFT 43
+
#define PERF_MEM_S(a, s) \
(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
diff --git a/original/uapi/linux/pfkeyv2.h b/original/uapi/linux/pfkeyv2.h
index d65b117..8abae1f 100644
--- a/original/uapi/linux/pfkeyv2.h
+++ b/original/uapi/linux/pfkeyv2.h
@@ -309,6 +309,7 @@
#define SADB_X_AALG_SHA2_512HMAC 7
#define SADB_X_AALG_RIPEMD160HMAC 8
#define SADB_X_AALG_AES_XCBC_MAC 9
+#define SADB_X_AALG_SM3_256HMAC 10
#define SADB_X_AALG_NULL 251 /* kame */
#define SADB_AALG_MAX 251
@@ -329,6 +330,7 @@
#define SADB_X_EALG_AES_GCM_ICV16 20
#define SADB_X_EALG_CAMELLIACBC 22
#define SADB_X_EALG_NULL_AES_GMAC 23
+#define SADB_X_EALG_SM4CBC 24
#define SADB_EALG_MAX 253 /* last EALG */
/* private allocations should use 249-255 (RFC2407) */
#define SADB_X_EALG_SERPENTCBC 252 /* draft-ietf-ipsec-ciph-aes-cbc-00 */
diff --git a/original/uapi/linux/pfrut.h b/original/uapi/linux/pfrut.h
new file mode 100644
index 0000000..42fa15f
--- /dev/null
+++ b/original/uapi/linux/pfrut.h
@@ -0,0 +1,262 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Platform Firmware Runtime Update header
+ *
+ * Copyright(c) 2021 Intel Corporation. All rights reserved.
+ */
+#ifndef __PFRUT_H__
+#define __PFRUT_H__
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define PFRUT_IOCTL_MAGIC 0xEE
+
+/**
+ * PFRU_IOC_SET_REV - _IOW(PFRUT_IOCTL_MAGIC, 0x01, unsigned int)
+ *
+ * Return:
+ * * 0 - success
+ * * -EFAULT - fail to read the revision id
+ * * -EINVAL - user provides an invalid revision id
+ *
+ * Set the Revision ID for Platform Firmware Runtime Update.
+ */
+#define PFRU_IOC_SET_REV _IOW(PFRUT_IOCTL_MAGIC, 0x01, unsigned int)
+
+/**
+ * PFRU_IOC_STAGE - _IOW(PFRUT_IOCTL_MAGIC, 0x02, unsigned int)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - stage phase returns invalid result
+ *
+ * Stage a capsule image from communication buffer and perform authentication.
+ */
+#define PFRU_IOC_STAGE _IOW(PFRUT_IOCTL_MAGIC, 0x02, unsigned int)
+
+/**
+ * PFRU_IOC_ACTIVATE - _IOW(PFRUT_IOCTL_MAGIC, 0x03, unsigned int)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - activate phase returns invalid result
+ *
+ * Activate a previously staged capsule image.
+ */
+#define PFRU_IOC_ACTIVATE _IOW(PFRUT_IOCTL_MAGIC, 0x03, unsigned int)
+
+/**
+ * PFRU_IOC_STAGE_ACTIVATE - _IOW(PFRUT_IOCTL_MAGIC, 0x04, unsigned int)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - stage/activate phase returns invalid result.
+ *
+ * Perform both stage and activation action.
+ */
+#define PFRU_IOC_STAGE_ACTIVATE _IOW(PFRUT_IOCTL_MAGIC, 0x04, unsigned int)
+
+/**
+ * PFRU_IOC_QUERY_CAP - _IOR(PFRUT_IOCTL_MAGIC, 0x05,
+ * struct pfru_update_cap_info)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - query phase returns invalid result
+ * * -EFAULT - the result fails to be copied to userspace
+ *
+ * Retrieve information on the Platform Firmware Runtime Update capability.
+ * The information is a struct pfru_update_cap_info.
+ */
+#define PFRU_IOC_QUERY_CAP _IOR(PFRUT_IOCTL_MAGIC, 0x05, struct pfru_update_cap_info)
+
+/**
+ * struct pfru_payload_hdr - Capsule file payload header.
+ *
+ * @sig: Signature of this capsule file.
+ * @hdr_version: Revision of this header structure.
+ * @hdr_size: Size of this header, including the OemHeader bytes.
+ * @hw_ver: The supported firmware version.
+ * @rt_ver: Version of the code injection image.
+ * @platform_id: A platform specific GUID to specify the platform what
+ * this capsule image support.
+ */
+struct pfru_payload_hdr {
+ __u32 sig;
+ __u32 hdr_version;
+ __u32 hdr_size;
+ __u32 hw_ver;
+ __u32 rt_ver;
+ __u8 platform_id[16];
+};
+
+enum pfru_dsm_status {
+ DSM_SUCCEED = 0,
+ DSM_FUNC_NOT_SUPPORT = 1,
+ DSM_INVAL_INPUT = 2,
+ DSM_HARDWARE_ERR = 3,
+ DSM_RETRY_SUGGESTED = 4,
+ DSM_UNKNOWN = 5,
+ DSM_FUNC_SPEC_ERR = 6,
+};
+
+/**
+ * struct pfru_update_cap_info - Runtime update capability information.
+ *
+ * @status: Indicator of whether this query succeed.
+ * @update_cap: Bitmap to indicate whether the feature is supported.
+ * @code_type: A buffer containing an image type GUID.
+ * @fw_version: Platform firmware version.
+ * @code_rt_version: Code injection runtime version for anti-rollback.
+ * @drv_type: A buffer containing an image type GUID.
+ * @drv_rt_version: The version of the driver update runtime code.
+ * @drv_svn: The secure version number(SVN) of the driver update runtime code.
+ * @platform_id: A buffer containing a platform ID GUID.
+ * @oem_id: A buffer containing an OEM ID GUID.
+ * @oem_info_len: Length of the buffer containing the vendor specific information.
+ */
+struct pfru_update_cap_info {
+ __u32 status;
+ __u32 update_cap;
+
+ __u8 code_type[16];
+ __u32 fw_version;
+ __u32 code_rt_version;
+
+ __u8 drv_type[16];
+ __u32 drv_rt_version;
+ __u32 drv_svn;
+
+ __u8 platform_id[16];
+ __u8 oem_id[16];
+
+ __u32 oem_info_len;
+};
+
+/**
+ * struct pfru_com_buf_info - Communication buffer information.
+ *
+ * @status: Indicator of whether this query succeed.
+ * @ext_status: Implementation specific query result.
+ * @addr_lo: Low 32bit physical address of the communication buffer to hold
+ * a runtime update package.
+ * @addr_hi: High 32bit physical address of the communication buffer to hold
+ * a runtime update package.
+ * @buf_size: Maximum size in bytes of the communication buffer.
+ */
+struct pfru_com_buf_info {
+ __u32 status;
+ __u32 ext_status;
+ __u64 addr_lo;
+ __u64 addr_hi;
+ __u32 buf_size;
+};
+
+/**
+ * struct pfru_updated_result - Platform firmware runtime update result information.
+ * @status: Indicator of whether this update succeed.
+ * @ext_status: Implementation specific update result.
+ * @low_auth_time: Low 32bit value of image authentication time in nanosecond.
+ * @high_auth_time: High 32bit value of image authentication time in nanosecond.
+ * @low_exec_time: Low 32bit value of image execution time in nanosecond.
+ * @high_exec_time: High 32bit value of image execution time in nanosecond.
+ */
+struct pfru_updated_result {
+ __u32 status;
+ __u32 ext_status;
+ __u64 low_auth_time;
+ __u64 high_auth_time;
+ __u64 low_exec_time;
+ __u64 high_exec_time;
+};
+
+/**
+ * struct pfrt_log_data_info - Log Data from telemetry service.
+ * @status: Indicator of whether this update succeed.
+ * @ext_status: Implementation specific update result.
+ * @chunk1_addr_lo: Low 32bit physical address of the telemetry data chunk1
+ * starting address.
+ * @chunk1_addr_hi: High 32bit physical address of the telemetry data chunk1
+ * starting address.
+ * @chunk2_addr_lo: Low 32bit physical address of the telemetry data chunk2
+ * starting address.
+ * @chunk2_addr_hi: High 32bit physical address of the telemetry data chunk2
+ * starting address.
+ * @max_data_size: Maximum supported size of data of all data chunks combined.
+ * @chunk1_size: Data size in bytes of the telemetry data chunk1 buffer.
+ * @chunk2_size: Data size in bytes of the telemetry data chunk2 buffer.
+ * @rollover_cnt: Number of times telemetry data buffer is overwritten
+ * since telemetry buffer reset.
+ * @reset_cnt: Number of times telemetry services resets that results in
+ * rollover count and data chunk buffers are reset.
+ */
+struct pfrt_log_data_info {
+ __u32 status;
+ __u32 ext_status;
+ __u64 chunk1_addr_lo;
+ __u64 chunk1_addr_hi;
+ __u64 chunk2_addr_lo;
+ __u64 chunk2_addr_hi;
+ __u32 max_data_size;
+ __u32 chunk1_size;
+ __u32 chunk2_size;
+ __u32 rollover_cnt;
+ __u32 reset_cnt;
+};
+
+/**
+ * struct pfrt_log_info - Telemetry log information.
+ * @log_level: The telemetry log level.
+ * @log_type: The telemetry log type(history and execution).
+ * @log_revid: The telemetry log revision id.
+ */
+struct pfrt_log_info {
+ __u32 log_level;
+ __u32 log_type;
+ __u32 log_revid;
+};
+
+/**
+ * PFRT_LOG_IOC_SET_INFO - _IOW(PFRUT_IOCTL_MAGIC, 0x06,
+ * struct pfrt_log_info)
+ *
+ * Return:
+ * * 0 - success
+ * * -EFAULT - fail to get the setting parameter
+ * * -EINVAL - fail to set the log level
+ *
+ * Set the PFRT log level and log type. The input information is
+ * a struct pfrt_log_info.
+ */
+#define PFRT_LOG_IOC_SET_INFO _IOW(PFRUT_IOCTL_MAGIC, 0x06, struct pfrt_log_info)
+
+/**
+ * PFRT_LOG_IOC_GET_INFO - _IOR(PFRUT_IOCTL_MAGIC, 0x07,
+ * struct pfrt_log_info)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - fail to get the log level
+ * * -EFAULT - fail to copy the result back to userspace
+ *
+ * Retrieve log level and log type of the telemetry. The information is
+ * a struct pfrt_log_info.
+ */
+#define PFRT_LOG_IOC_GET_INFO _IOR(PFRUT_IOCTL_MAGIC, 0x07, struct pfrt_log_info)
+
+/**
+ * PFRT_LOG_IOC_GET_DATA_INFO - _IOR(PFRUT_IOCTL_MAGIC, 0x08,
+ * struct pfrt_log_data_info)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - fail to get the log buffer information
+ * * -EFAULT - fail to copy the log buffer information to userspace
+ *
+ * Retrieve data information about the telemetry. The information
+ * is a struct pfrt_log_data_info.
+ */
+#define PFRT_LOG_IOC_GET_DATA_INFO _IOR(PFRUT_IOCTL_MAGIC, 0x08, struct pfrt_log_data_info)
+
+#endif /* __PFRUT_H__ */
diff --git a/original/uapi/linux/pkt_cls.h b/original/uapi/linux/pkt_cls.h
index 7ea59cf..ee38b35 100644
--- a/original/uapi/linux/pkt_cls.h
+++ b/original/uapi/linux/pkt_cls.h
@@ -19,12 +19,16 @@
TCA_ACT_FLAGS,
TCA_ACT_HW_STATS,
TCA_ACT_USED_HW_STATS,
+ TCA_ACT_IN_HW_COUNT,
__TCA_ACT_MAX
};
-#define TCA_ACT_FLAGS_NO_PERCPU_STATS 1 /* Don't use percpu allocator for
- * actions stats.
- */
+/* See other TCA_ACT_FLAGS_ * flags in include/net/act_api.h. */
+#define TCA_ACT_FLAGS_NO_PERCPU_STATS (1 << 0) /* Don't use percpu allocator for
+ * actions stats.
+ */
+#define TCA_ACT_FLAGS_SKIP_HW (1 << 1) /* don't offload action to HW */
+#define TCA_ACT_FLAGS_SKIP_SW (1 << 2) /* don't use action in SW */
/* tca HW stats type
* When user does not pass the attribute, he does not care.
@@ -190,6 +194,8 @@
TCA_POLICE_PAD,
TCA_POLICE_RATE64,
TCA_POLICE_PEAKRATE64,
+ TCA_POLICE_PKTRATE64,
+ TCA_POLICE_PKTBURST64,
__TCA_POLICE_MAX
#define TCA_POLICE_RESULT TCA_POLICE_RESULT
};
diff --git a/original/uapi/linux/pkt_sched.h b/original/uapi/linux/pkt_sched.h
index 79a699f..f292b46 100644
--- a/original/uapi/linux/pkt_sched.h
+++ b/original/uapi/linux/pkt_sched.h
@@ -827,6 +827,8 @@
/* FQ_CODEL */
+#define FQ_CODEL_QUANTUM_MAX (1 << 20)
+
enum {
TCA_FQ_CODEL_UNSPEC,
TCA_FQ_CODEL_TARGET,
@@ -838,6 +840,8 @@
TCA_FQ_CODEL_CE_THRESHOLD,
TCA_FQ_CODEL_DROP_BATCH_SIZE,
TCA_FQ_CODEL_MEMORY_LIMIT,
+ TCA_FQ_CODEL_CE_THRESHOLD_SELECTOR,
+ TCA_FQ_CODEL_CE_THRESHOLD_MASK,
__TCA_FQ_CODEL_MAX
};
diff --git a/original/uapi/linux/prctl.h b/original/uapi/linux/prctl.h
index 5d836c9..e998764 100644
--- a/original/uapi/linux/prctl.h
+++ b/original/uapi/linux/prctl.h
@@ -213,6 +213,7 @@
/* Speculation control variants */
# define PR_SPEC_STORE_BYPASS 0
# define PR_SPEC_INDIRECT_BRANCH 1
+# define PR_SPEC_L1D_FLUSH 2
/* Return and control values for PR_SET/GET_SPECULATION_CTRL */
# define PR_SPEC_NOT_AFFECTED 0
# define PR_SPEC_PRCTL (1UL << 0)
@@ -234,14 +235,15 @@
#define PR_GET_TAGGED_ADDR_CTRL 56
# define PR_TAGGED_ADDR_ENABLE (1UL << 0)
/* MTE tag check fault modes */
-# define PR_MTE_TCF_SHIFT 1
-# define PR_MTE_TCF_NONE (0UL << PR_MTE_TCF_SHIFT)
-# define PR_MTE_TCF_SYNC (1UL << PR_MTE_TCF_SHIFT)
-# define PR_MTE_TCF_ASYNC (2UL << PR_MTE_TCF_SHIFT)
-# define PR_MTE_TCF_MASK (3UL << PR_MTE_TCF_SHIFT)
+# define PR_MTE_TCF_NONE 0UL
+# define PR_MTE_TCF_SYNC (1UL << 1)
+# define PR_MTE_TCF_ASYNC (1UL << 2)
+# define PR_MTE_TCF_MASK (PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC)
/* MTE tag inclusion mask */
# define PR_MTE_TAG_SHIFT 3
# define PR_MTE_TAG_MASK (0xffffUL << PR_MTE_TAG_SHIFT)
+/* Unused; kept only for source compatibility */
+# define PR_MTE_TCF_SHIFT 1
/* Control reclaim behavior when allocating memory */
#define PR_SET_IO_FLUSHER 57
@@ -255,6 +257,21 @@
# define SYSCALL_DISPATCH_FILTER_ALLOW 0
# define SYSCALL_DISPATCH_FILTER_BLOCK 1
+/* Set/get enabled arm64 pointer authentication keys */
+#define PR_PAC_SET_ENABLED_KEYS 60
+#define PR_PAC_GET_ENABLED_KEYS 61
+
+/* Request the scheduler to share a core */
+#define PR_SCHED_CORE 62
+# define PR_SCHED_CORE_GET 0
+# define PR_SCHED_CORE_CREATE 1 /* create unique core_sched cookie */
+# define PR_SCHED_CORE_SHARE_TO 2 /* push core_sched cookie to pid */
+# define PR_SCHED_CORE_SHARE_FROM 3 /* pull core_sched cookie to pid */
+# define PR_SCHED_CORE_MAX 4
+# define PR_SCHED_CORE_SCOPE_THREAD 0
+# define PR_SCHED_CORE_SCOPE_THREAD_GROUP 1
+# define PR_SCHED_CORE_SCOPE_PROCESS_GROUP 2
+
#define PR_SET_VMA 0x53564d41
# define PR_SET_VMA_ANON_NAME 0
diff --git a/original/uapi/linux/psample.h b/original/uapi/linux/psample.h
index bff5032..e585db5 100644
--- a/original/uapi/linux/psample.h
+++ b/original/uapi/linux/psample.h
@@ -13,6 +13,13 @@
PSAMPLE_ATTR_GROUP_REFCOUNT,
PSAMPLE_ATTR_TUNNEL,
+ PSAMPLE_ATTR_PAD,
+ PSAMPLE_ATTR_OUT_TC, /* u16 */
+ PSAMPLE_ATTR_OUT_TC_OCC, /* u64, bytes */
+ PSAMPLE_ATTR_LATENCY, /* u64, nanoseconds */
+ PSAMPLE_ATTR_TIMESTAMP, /* u64, nanoseconds */
+ PSAMPLE_ATTR_PROTO, /* u16 */
+
__PSAMPLE_ATTR_MAX
};
diff --git a/original/uapi/linux/ptrace.h b/original/uapi/linux/ptrace.h
index 83ee45f..3747bf8 100644
--- a/original/uapi/linux/ptrace.h
+++ b/original/uapi/linux/ptrace.h
@@ -102,6 +102,16 @@
};
};
+#define PTRACE_GET_RSEQ_CONFIGURATION 0x420f
+
+struct ptrace_rseq_configuration {
+ __u64 rseq_abi_pointer;
+ __u32 rseq_abi_size;
+ __u32 signature;
+ __u32 flags;
+ __u32 pad;
+};
+
/*
* These values are stored in task->ptrace_message
* by tracehook_report_syscall_* to describe the current syscall-stop.
diff --git a/original/uapi/linux/raw.h b/original/uapi/linux/raw.h
deleted file mode 100644
index 4787491..0000000
--- a/original/uapi/linux/raw.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __LINUX_RAW_H
-#define __LINUX_RAW_H
-
-#include <linux/types.h>
-
-#define RAW_SETBIND _IO( 0xac, 0 )
-#define RAW_GETBIND _IO( 0xac, 1 )
-
-struct raw_config_request
-{
- int raw_minor;
- __u64 block_major;
- __u64 block_minor;
-};
-
-#endif /* __LINUX_RAW_H */
diff --git a/original/uapi/linux/resource.h b/original/uapi/linux/resource.h
index 74ef57b..ac5d6a3 100644
--- a/original/uapi/linux/resource.h
+++ b/original/uapi/linux/resource.h
@@ -66,10 +66,17 @@
#define _STK_LIM (8*1024*1024)
/*
- * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
- * and other sensitive information are never written to disk.
+ * Limit the amount of locked memory by some sane default:
+ * root can always increase this limit if needed.
+ *
+ * The main use-cases are (1) preventing sensitive memory
+ * from being swapped; (2) real-time operations; (3) via
+ * IOURING_REGISTER_BUFFERS.
+ *
+ * The first two don't need much. The latter will take as
+ * much as it can get. 8MB is a reasonably sane default.
*/
-#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
+#define MLOCK_LIMIT (8*1024*1024)
/*
* Due to binary compatibility, the actual resource numbers
diff --git a/original/uapi/linux/rkisp1-config.h b/original/uapi/linux/rkisp1-config.h
index 36e3efb..583ca0d 100644
--- a/original/uapi/linux/rkisp1-config.h
+++ b/original/uapi/linux/rkisp1-config.h
@@ -15,7 +15,7 @@
#define RKISP1_CIF_ISP_MODULE_BLS (1U << 1)
/* Sensor De-gamma */
#define RKISP1_CIF_ISP_MODULE_SDG (1U << 2)
-/* Histogram */
+/* Histogram statistics configuration */
#define RKISP1_CIF_ISP_MODULE_HST (1U << 3)
/* Lens Shade Control */
#define RKISP1_CIF_ISP_MODULE_LSC (1U << 4)
@@ -31,13 +31,13 @@
#define RKISP1_CIF_ISP_MODULE_GOC (1U << 9)
/* Color Processing */
#define RKISP1_CIF_ISP_MODULE_CPROC (1U << 10)
-/* Auto Focus Control */
+/* Auto Focus Control statistics configuration */
#define RKISP1_CIF_ISP_MODULE_AFC (1U << 11)
-/* Auto White Balancing */
+/* Auto White Balancing statistics configuration */
#define RKISP1_CIF_ISP_MODULE_AWB (1U << 12)
/* Image Effect */
#define RKISP1_CIF_ISP_MODULE_IE (1U << 13)
-/* Auto Exposure Control */
+/* Auto Exposure Control statistics configuration */
#define RKISP1_CIF_ISP_MODULE_AEC (1U << 14)
/* Wide Dynamic Range */
#define RKISP1_CIF_ISP_MODULE_WDR (1U << 15)
@@ -411,7 +411,7 @@
};
/**
- * struct rkisp1_cif_isp_awb_meas_config - Configuration used by auto white balance
+ * struct rkisp1_cif_isp_awb_meas_config - Configuration for the AWB statistics
*
* @awb_mode: the awb meas mode. From enum rkisp1_cif_isp_awb_mode_type.
* @awb_wnd: white balance measurement window (in pixels)
@@ -550,7 +550,7 @@
};
/**
- * struct rkisp1_cif_isp_hst_config - Configuration used by Histogram
+ * struct rkisp1_cif_isp_hst_config - Configuration for Histogram statistics
*
* @mode: histogram mode (from enum rkisp1_cif_isp_histogram_mode)
* @histogram_predivider: process every stepsize pixel, all other pixels are
@@ -575,7 +575,7 @@
};
/**
- * struct rkisp1_cif_isp_aec_config - Configuration used by Auto Exposure Control
+ * struct rkisp1_cif_isp_aec_config - Configuration for Auto Exposure statistics
*
* @mode: Exposure measure mode (from enum rkisp1_cif_isp_exp_meas_mode)
* @autostop: stop mode (from enum rkisp1_cif_isp_exp_ctrl_autostop)
@@ -588,7 +588,7 @@
};
/**
- * struct rkisp1_cif_isp_afc_config - Configuration used by Auto Focus Control
+ * struct rkisp1_cif_isp_afc_config - Configuration for the Auto Focus statistics
*
* @num_afm_win: max RKISP1_CIF_ISP_AFM_MAX_WINDOWS
* @afm_win: coordinates of the meas window
diff --git a/original/uapi/linux/rpmsg.h b/original/uapi/linux/rpmsg.h
index e14c6da..f5ca874 100644
--- a/original/uapi/linux/rpmsg.h
+++ b/original/uapi/linux/rpmsg.h
@@ -9,11 +9,13 @@
#include <linux/ioctl.h>
#include <linux/types.h>
+#define RPMSG_ADDR_ANY 0xFFFFFFFF
+
/**
* struct rpmsg_endpoint_info - endpoint info representation
* @name: name of service
- * @src: local address
- * @dst: destination address
+ * @src: local address. To set to RPMSG_ADDR_ANY if not used.
+ * @dst: destination address. To set to RPMSG_ADDR_ANY if not used.
*/
struct rpmsg_endpoint_info {
char name[32];
@@ -21,7 +23,14 @@
__u32 dst;
};
+/**
+ * Instantiate a new rmpsg char device endpoint.
+ */
#define RPMSG_CREATE_EPT_IOCTL _IOW(0xb5, 0x1, struct rpmsg_endpoint_info)
+
+/**
+ * Destroy a rpmsg char device endpoint created by the RPMSG_CREATE_EPT_IOCTL.
+ */
#define RPMSG_DESTROY_EPT_IOCTL _IO(0xb5, 0x2)
#endif
diff --git a/original/uapi/linux/rtc.h b/original/uapi/linux/rtc.h
index f950bff..03e5b77 100644
--- a/original/uapi/linux/rtc.h
+++ b/original/uapi/linux/rtc.h
@@ -14,6 +14,7 @@
#include <linux/const.h>
#include <linux/ioctl.h>
+#include <linux/types.h>
/*
* The struct used to pass data via the following ioctl. Similar to the
@@ -66,6 +67,17 @@
long pll_clock; /* base PLL frequency */
};
+struct rtc_param {
+ __u64 param;
+ union {
+ __u64 uvalue;
+ __s64 svalue;
+ __u64 ptr;
+ };
+ __u32 index;
+ __u32 __pad;
+};
+
/*
* ioctl calls that are permitted to the /dev/rtc interface, if
* any of the RTC drivers are enabled.
@@ -95,6 +107,9 @@
#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
+#define RTC_PARAM_GET _IOW('p', 0x13, struct rtc_param) /* Get parameter */
+#define RTC_PARAM_SET _IOW('p', 0x14, struct rtc_param) /* Set parameter */
+
#define RTC_VL_DATA_INVALID _BITUL(0) /* Voltage too low, RTC data is invalid */
#define RTC_VL_BACKUP_LOW _BITUL(1) /* Backup voltage is low */
#define RTC_VL_BACKUP_EMPTY _BITUL(2) /* Backup empty or not present */
@@ -114,7 +129,21 @@
#define RTC_FEATURE_ALARM 0
#define RTC_FEATURE_ALARM_RES_MINUTE 1
#define RTC_FEATURE_NEED_WEEK_DAY 2
-#define RTC_FEATURE_CNT 3
+#define RTC_FEATURE_ALARM_RES_2S 3
+#define RTC_FEATURE_UPDATE_INTERRUPT 4
+#define RTC_FEATURE_CORRECTION 5
+#define RTC_FEATURE_BACKUP_SWITCH_MODE 6
+#define RTC_FEATURE_CNT 7
+
+/* parameter list */
+#define RTC_PARAM_FEATURES 0
+#define RTC_PARAM_CORRECTION 1
+#define RTC_PARAM_BACKUP_SWITCH_MODE 2
+
+#define RTC_BSM_DISABLED 0
+#define RTC_BSM_DIRECT 1
+#define RTC_BSM_LEVEL 2
+#define RTC_BSM_STANDBY 3
#define RTC_MAX_FREQ 8192
diff --git a/original/uapi/linux/rtnetlink.h b/original/uapi/linux/rtnetlink.h
index 91e4ca0..93d934c 100644
--- a/original/uapi/linux/rtnetlink.h
+++ b/original/uapi/linux/rtnetlink.h
@@ -178,6 +178,13 @@
RTM_GETVLAN,
#define RTM_GETVLAN RTM_GETVLAN
+ RTM_NEWNEXTHOPBUCKET = 116,
+#define RTM_NEWNEXTHOPBUCKET RTM_NEWNEXTHOPBUCKET
+ RTM_DELNEXTHOPBUCKET,
+#define RTM_DELNEXTHOPBUCKET RTM_DELNEXTHOPBUCKET
+ RTM_GETNEXTHOPBUCKET,
+#define RTM_GETNEXTHOPBUCKET RTM_GETNEXTHOPBUCKET
+
__RTM_MAX,
#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1)
};
@@ -283,6 +290,7 @@
#define RTPROT_MROUTED 17 /* Multicast daemon */
#define RTPROT_KEEPALIVED 18 /* Keepalived daemon */
#define RTPROT_BABEL 42 /* Babel daemon */
+#define RTPROT_OPENR 99 /* Open Routing (Open/R) Routes */
#define RTPROT_BGP 186 /* BGP Routes */
#define RTPROT_ISIS 187 /* ISIS Routes */
#define RTPROT_OSPF 188 /* OSPF Routes */
@@ -746,6 +754,8 @@
#define RTNLGRP_NEXTHOP RTNLGRP_NEXTHOP
RTNLGRP_BRVLAN,
#define RTNLGRP_BRVLAN RTNLGRP_BRVLAN
+ RTNLGRP_MCTP_IFADDR,
+#define RTNLGRP_MCTP_IFADDR RTNLGRP_MCTP_IFADDR
__RTNLGRP_MAX
};
#define RTNLGRP_MAX (__RTNLGRP_MAX - 1)
diff --git a/original/uapi/linux/sctp.h b/original/uapi/linux/sctp.h
index cb78e7a..c4ff1eb 100644
--- a/original/uapi/linux/sctp.h
+++ b/original/uapi/linux/sctp.h
@@ -141,6 +141,7 @@
#define SCTP_EXPOSE_POTENTIALLY_FAILED_STATE 131
#define SCTP_EXPOSE_PF_STATE SCTP_EXPOSE_POTENTIALLY_FAILED_STATE
#define SCTP_REMOTE_UDP_ENCAPS_PORT 132
+#define SCTP_PLPMTUD_PROBE_INTERVAL 133
/* PR-SCTP policies */
#define SCTP_PR_SCTP_NONE 0x0000
@@ -1213,4 +1214,11 @@
SCTP_SS_MAX = SCTP_SS_RR
};
+/* Probe Interval socket option */
+struct sctp_probeinterval {
+ sctp_assoc_t spi_assoc_id;
+ struct sockaddr_storage spi_address;
+ __u32 spi_interval;
+};
+
#endif /* _UAPI_SCTP_H */
diff --git a/original/uapi/linux/seccomp.h b/original/uapi/linux/seccomp.h
index 6ba18b8..7807425 100644
--- a/original/uapi/linux/seccomp.h
+++ b/original/uapi/linux/seccomp.h
@@ -115,6 +115,7 @@
/* valid flags for seccomp_notif_addfd */
#define SECCOMP_ADDFD_FLAG_SETFD (1UL << 0) /* Specify remote fd */
+#define SECCOMP_ADDFD_FLAG_SEND (1UL << 1) /* Addfd and return it, atomically */
/**
* struct seccomp_notif_addfd
diff --git a/original/uapi/linux/seg6_local.h b/original/uapi/linux/seg6_local.h
index 3b39ef1..332b18f 100644
--- a/original/uapi/linux/seg6_local.h
+++ b/original/uapi/linux/seg6_local.h
@@ -27,6 +27,7 @@
SEG6_LOCAL_OIF,
SEG6_LOCAL_BPF,
SEG6_LOCAL_VRFTABLE,
+ SEG6_LOCAL_COUNTERS,
__SEG6_LOCAL_MAX,
};
#define SEG6_LOCAL_MAX (__SEG6_LOCAL_MAX - 1)
@@ -63,6 +64,8 @@
SEG6_LOCAL_ACTION_END_AM = 14,
/* custom BPF action */
SEG6_LOCAL_ACTION_END_BPF = 15,
+ /* decap and lookup of DA in v4 or v6 table */
+ SEG6_LOCAL_ACTION_END_DT46 = 16,
__SEG6_LOCAL_ACTION_MAX,
};
@@ -78,4 +81,33 @@
#define SEG6_LOCAL_BPF_PROG_MAX (__SEG6_LOCAL_BPF_PROG_MAX - 1)
+/* SRv6 Behavior counters are encoded as netlink attributes guaranteeing the
+ * correct alignment.
+ * Each counter is identified by a different attribute type (i.e.
+ * SEG6_LOCAL_CNT_PACKETS).
+ *
+ * - SEG6_LOCAL_CNT_PACKETS: identifies a counter that counts the number of
+ * packets that have been CORRECTLY processed by an SRv6 Behavior instance
+ * (i.e., packets that generate errors or are dropped are NOT counted).
+ *
+ * - SEG6_LOCAL_CNT_BYTES: identifies a counter that counts the total amount
+ * of traffic in bytes of all packets that have been CORRECTLY processed by
+ * an SRv6 Behavior instance (i.e., packets that generate errors or are
+ * dropped are NOT counted).
+ *
+ * - SEG6_LOCAL_CNT_ERRORS: identifies a counter that counts the number of
+ * packets that have NOT been properly processed by an SRv6 Behavior instance
+ * (i.e., packets that generate errors or are dropped).
+ */
+enum {
+ SEG6_LOCAL_CNT_UNSPEC,
+ SEG6_LOCAL_CNT_PAD, /* pad for 64 bits values */
+ SEG6_LOCAL_CNT_PACKETS,
+ SEG6_LOCAL_CNT_BYTES,
+ SEG6_LOCAL_CNT_ERRORS,
+ __SEG6_LOCAL_CNT_MAX,
+};
+
+#define SEG6_LOCAL_CNT_MAX (__SEG6_LOCAL_CNT_MAX - 1)
+
#endif
diff --git a/original/uapi/linux/serial.h b/original/uapi/linux/serial.h
index 93eb3c4..fa6b16e 100644
--- a/original/uapi/linux/serial.h
+++ b/original/uapi/linux/serial.h
@@ -52,11 +52,11 @@
#define PORT_16450 2
#define PORT_16550 3
#define PORT_16550A 4
-#define PORT_CIRRUS 5 /* usurped by cyclades.c */
+#define PORT_CIRRUS 5
#define PORT_16650 6
#define PORT_16650V2 7
#define PORT_16750 8
-#define PORT_STARTECH 9 /* usurped by cyclades.c */
+#define PORT_STARTECH 9
#define PORT_16C950 10 /* Oxford Semiconductor */
#define PORT_16654 11
#define PORT_16850 12
diff --git a/original/uapi/linux/serial_reg.h b/original/uapi/linux/serial_reg.h
index be07b54..f51bc8f 100644
--- a/original/uapi/linux/serial_reg.h
+++ b/original/uapi/linux/serial_reg.h
@@ -62,6 +62,7 @@
* ST16C654: 8 16 56 60 8 16 32 56 PORT_16654
* TI16C750: 1 16 32 56 xx xx xx xx PORT_16750
* TI16C752: 8 16 56 60 8 16 32 56
+ * OX16C950: 16 32 112 120 16 32 64 112 PORT_16C950
* Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA
*/
#define UART_FCR_R_TRIG_00 0x00
diff --git a/original/uapi/linux/smc.h b/original/uapi/linux/smc.h
index 3e68da0..6c2874f 100644
--- a/original/uapi/linux/smc.h
+++ b/original/uapi/linux/smc.h
@@ -38,6 +38,9 @@
#define SMC_GENL_FAMILY_VERSION 1
#define SMC_PCI_ID_STR_LEN 16 /* Max length of pci id string */
+#define SMC_MAX_HOSTNAME_LEN 32 /* Max length of the hostname */
+#define SMC_MAX_UEID 4 /* Max number of user EIDs */
+#define SMC_MAX_EID_LEN 32 /* Max length of an EID */
/* SMC_GENL_FAMILY commands */
enum {
@@ -47,6 +50,15 @@
SMC_NETLINK_GET_LGR_SMCD,
SMC_NETLINK_GET_DEV_SMCD,
SMC_NETLINK_GET_DEV_SMCR,
+ SMC_NETLINK_GET_STATS,
+ SMC_NETLINK_GET_FBACK_STATS,
+ SMC_NETLINK_DUMP_UEID,
+ SMC_NETLINK_ADD_UEID,
+ SMC_NETLINK_REMOVE_UEID,
+ SMC_NETLINK_FLUSH_UEID,
+ SMC_NETLINK_DUMP_SEID,
+ SMC_NETLINK_ENABLE_SEID,
+ SMC_NETLINK_DISABLE_SEID,
};
/* SMC_GENL_FAMILY top level attributes */
@@ -58,6 +70,8 @@
SMC_GEN_LGR_SMCD, /* nest */
SMC_GEN_DEV_SMCD, /* nest */
SMC_GEN_DEV_SMCR, /* nest */
+ SMC_GEN_STATS, /* nest */
+ SMC_GEN_FBACK_STATS, /* nest */
__SMC_GEN_MAX,
SMC_GEN_MAX = __SMC_GEN_MAX - 1
};
@@ -70,17 +84,28 @@
SMC_NLA_SYS_IS_ISM_V2, /* u8 */
SMC_NLA_SYS_LOCAL_HOST, /* string */
SMC_NLA_SYS_SEID, /* string */
+ SMC_NLA_SYS_IS_SMCR_V2, /* u8 */
__SMC_NLA_SYS_MAX,
SMC_NLA_SYS_MAX = __SMC_NLA_SYS_MAX - 1
};
-/* SMC_NLA_LGR_V2 nested attributes */
+/* SMC_NLA_LGR_D_V2_COMMON and SMC_NLA_LGR_R_V2_COMMON nested attributes */
enum {
SMC_NLA_LGR_V2_VER, /* u8 */
SMC_NLA_LGR_V2_REL, /* u8 */
SMC_NLA_LGR_V2_OS, /* u8 */
SMC_NLA_LGR_V2_NEG_EID, /* string */
SMC_NLA_LGR_V2_PEER_HOST, /* string */
+ __SMC_NLA_LGR_V2_MAX,
+ SMC_NLA_LGR_V2_MAX = __SMC_NLA_LGR_V2_MAX - 1
+};
+
+/* SMC_NLA_LGR_R_V2 nested attributes */
+enum {
+ SMC_NLA_LGR_R_V2_UNSPEC,
+ SMC_NLA_LGR_R_V2_DIRECT, /* u8 */
+ __SMC_NLA_LGR_R_V2_MAX,
+ SMC_NLA_LGR_R_V2_MAX = __SMC_NLA_LGR_R_V2_MAX - 1
};
/* SMC_GEN_LGR_SMCR attributes */
@@ -92,6 +117,10 @@
SMC_NLA_LGR_R_PNETID, /* string */
SMC_NLA_LGR_R_VLAN_ID, /* u8 */
SMC_NLA_LGR_R_CONNS_NUM, /* u32 */
+ SMC_NLA_LGR_R_V2_COMMON, /* nest */
+ SMC_NLA_LGR_R_V2, /* nest */
+ SMC_NLA_LGR_R_NET_COOKIE, /* u64 */
+ SMC_NLA_LGR_R_PAD, /* flag */
__SMC_NLA_LGR_R_MAX,
SMC_NLA_LGR_R_MAX = __SMC_NLA_LGR_R_MAX - 1
};
@@ -124,7 +153,7 @@
SMC_NLA_LGR_D_PNETID, /* string */
SMC_NLA_LGR_D_CHID, /* u16 */
SMC_NLA_LGR_D_PAD, /* flag */
- SMC_NLA_LGR_V2, /* nest */
+ SMC_NLA_LGR_D_V2_COMMON, /* nest */
__SMC_NLA_LGR_D_MAX,
SMC_NLA_LGR_D_MAX = __SMC_NLA_LGR_D_MAX - 1
};
@@ -159,4 +188,100 @@
SMC_NLA_DEV_MAX = __SMC_NLA_DEV_MAX - 1
};
+/* SMC_NLA_STATS_T_TX(RX)_RMB_SIZE nested attributes */
+/* SMC_NLA_STATS_TX(RX)PLOAD_SIZE nested attributes */
+enum {
+ SMC_NLA_STATS_PLOAD_PAD,
+ SMC_NLA_STATS_PLOAD_8K, /* u64 */
+ SMC_NLA_STATS_PLOAD_16K, /* u64 */
+ SMC_NLA_STATS_PLOAD_32K, /* u64 */
+ SMC_NLA_STATS_PLOAD_64K, /* u64 */
+ SMC_NLA_STATS_PLOAD_128K, /* u64 */
+ SMC_NLA_STATS_PLOAD_256K, /* u64 */
+ SMC_NLA_STATS_PLOAD_512K, /* u64 */
+ SMC_NLA_STATS_PLOAD_1024K, /* u64 */
+ SMC_NLA_STATS_PLOAD_G_1024K, /* u64 */
+ __SMC_NLA_STATS_PLOAD_MAX,
+ SMC_NLA_STATS_PLOAD_MAX = __SMC_NLA_STATS_PLOAD_MAX - 1
+};
+
+/* SMC_NLA_STATS_T_TX(RX)_RMB_STATS nested attributes */
+enum {
+ SMC_NLA_STATS_RMB_PAD,
+ SMC_NLA_STATS_RMB_SIZE_SM_PEER_CNT, /* u64 */
+ SMC_NLA_STATS_RMB_SIZE_SM_CNT, /* u64 */
+ SMC_NLA_STATS_RMB_FULL_PEER_CNT, /* u64 */
+ SMC_NLA_STATS_RMB_FULL_CNT, /* u64 */
+ SMC_NLA_STATS_RMB_REUSE_CNT, /* u64 */
+ SMC_NLA_STATS_RMB_ALLOC_CNT, /* u64 */
+ SMC_NLA_STATS_RMB_DGRADE_CNT, /* u64 */
+ __SMC_NLA_STATS_RMB_MAX,
+ SMC_NLA_STATS_RMB_MAX = __SMC_NLA_STATS_RMB_MAX - 1
+};
+
+/* SMC_NLA_STATS_SMCD_TECH and _SMCR_TECH nested attributes */
+enum {
+ SMC_NLA_STATS_T_PAD,
+ SMC_NLA_STATS_T_TX_RMB_SIZE, /* nest */
+ SMC_NLA_STATS_T_RX_RMB_SIZE, /* nest */
+ SMC_NLA_STATS_T_TXPLOAD_SIZE, /* nest */
+ SMC_NLA_STATS_T_RXPLOAD_SIZE, /* nest */
+ SMC_NLA_STATS_T_TX_RMB_STATS, /* nest */
+ SMC_NLA_STATS_T_RX_RMB_STATS, /* nest */
+ SMC_NLA_STATS_T_CLNT_V1_SUCC, /* u64 */
+ SMC_NLA_STATS_T_CLNT_V2_SUCC, /* u64 */
+ SMC_NLA_STATS_T_SRV_V1_SUCC, /* u64 */
+ SMC_NLA_STATS_T_SRV_V2_SUCC, /* u64 */
+ SMC_NLA_STATS_T_SENDPAGE_CNT, /* u64 */
+ SMC_NLA_STATS_T_SPLICE_CNT, /* u64 */
+ SMC_NLA_STATS_T_CORK_CNT, /* u64 */
+ SMC_NLA_STATS_T_NDLY_CNT, /* u64 */
+ SMC_NLA_STATS_T_URG_DATA_CNT, /* u64 */
+ SMC_NLA_STATS_T_RX_BYTES, /* u64 */
+ SMC_NLA_STATS_T_TX_BYTES, /* u64 */
+ SMC_NLA_STATS_T_RX_CNT, /* u64 */
+ SMC_NLA_STATS_T_TX_CNT, /* u64 */
+ __SMC_NLA_STATS_T_MAX,
+ SMC_NLA_STATS_T_MAX = __SMC_NLA_STATS_T_MAX - 1
+};
+
+/* SMC_GEN_STATS attributes */
+enum {
+ SMC_NLA_STATS_PAD,
+ SMC_NLA_STATS_SMCD_TECH, /* nest */
+ SMC_NLA_STATS_SMCR_TECH, /* nest */
+ SMC_NLA_STATS_CLNT_HS_ERR_CNT, /* u64 */
+ SMC_NLA_STATS_SRV_HS_ERR_CNT, /* u64 */
+ __SMC_NLA_STATS_MAX,
+ SMC_NLA_STATS_MAX = __SMC_NLA_STATS_MAX - 1
+};
+
+/* SMC_GEN_FBACK_STATS attributes */
+enum {
+ SMC_NLA_FBACK_STATS_PAD,
+ SMC_NLA_FBACK_STATS_TYPE, /* u8 */
+ SMC_NLA_FBACK_STATS_SRV_CNT, /* u64 */
+ SMC_NLA_FBACK_STATS_CLNT_CNT, /* u64 */
+ SMC_NLA_FBACK_STATS_RSN_CODE, /* u32 */
+ SMC_NLA_FBACK_STATS_RSN_CNT, /* u16 */
+ __SMC_NLA_FBACK_STATS_MAX,
+ SMC_NLA_FBACK_STATS_MAX = __SMC_NLA_FBACK_STATS_MAX - 1
+};
+
+/* SMC_NETLINK_UEID attributes */
+enum {
+ SMC_NLA_EID_TABLE_UNSPEC,
+ SMC_NLA_EID_TABLE_ENTRY, /* string */
+ __SMC_NLA_EID_TABLE_MAX,
+ SMC_NLA_EID_TABLE_MAX = __SMC_NLA_EID_TABLE_MAX - 1
+};
+
+/* SMC_NETLINK_SEID attributes */
+enum {
+ SMC_NLA_SEID_UNSPEC,
+ SMC_NLA_SEID_ENTRY, /* string */
+ SMC_NLA_SEID_ENABLED, /* u8 */
+ __SMC_NLA_SEID_TABLE_MAX,
+ SMC_NLA_SEID_TABLE_MAX = __SMC_NLA_SEID_TABLE_MAX - 1
+};
#endif /* _UAPI_LINUX_SMC_H */
diff --git a/original/uapi/linux/snmp.h b/original/uapi/linux/snmp.h
index 26fc60c..904909d 100644
--- a/original/uapi/linux/snmp.h
+++ b/original/uapi/linux/snmp.h
@@ -290,6 +290,8 @@
LINUX_MIB_TCPDUPLICATEDATAREHASH, /* TCPDuplicateDataRehash */
LINUX_MIB_TCPDSACKRECVSEGS, /* TCPDSACKRecvSegs */
LINUX_MIB_TCPDSACKIGNOREDDUBIOUS, /* TCPDSACKIgnoredDubious */
+ LINUX_MIB_TCPMIGRATEREQSUCCESS, /* TCPMigrateReqSuccess */
+ LINUX_MIB_TCPMIGRATEREQFAILURE, /* TCPMigrateReqFailure */
__LINUX_MIB_MAX
};
diff --git a/original/uapi/linux/socket.h b/original/uapi/linux/socket.h
index c3409c8..eb0a9a5 100644
--- a/original/uapi/linux/socket.h
+++ b/original/uapi/linux/socket.h
@@ -26,4 +26,9 @@
};
};
+#define SOCK_SNDBUF_LOCK 1
+#define SOCK_RCVBUF_LOCK 2
+
+#define SOCK_BUF_LOCK_MASK (SOCK_SNDBUF_LOCK | SOCK_RCVBUF_LOCK)
+
#endif /* _UAPI_LINUX_SOCKET_H */
diff --git a/original/uapi/linux/soundcard.h b/original/uapi/linux/soundcard.h
index f3b21f9..ac13187 100644
--- a/original/uapi/linux/soundcard.h
+++ b/original/uapi/linux/soundcard.h
@@ -1051,7 +1051,7 @@
* the GPL version of OSS-4.x and build against that version
* of the header.
*
- * We redefine the extern keyword so that make headers_check
+ * We redefine the extern keyword so that usr/include/headers_check.pl
* does not complain about SEQ_USE_EXTBUF.
*/
#define SEQ_DECLAREBUF() SEQ_USE_EXTBUF()
diff --git a/original/uapi/linux/stddef.h b/original/uapi/linux/stddef.h
index ee8220f..3021ea2 100644
--- a/original/uapi/linux/stddef.h
+++ b/original/uapi/linux/stddef.h
@@ -4,3 +4,40 @@
#ifndef __always_inline
#define __always_inline inline
#endif
+
+/**
+ * __struct_group() - Create a mirrored named and anonyomous struct
+ *
+ * @TAG: The tag name for the named sub-struct (usually empty)
+ * @NAME: The identifier name of the mirrored sub-struct
+ * @ATTRS: Any struct attributes (usually empty)
+ * @MEMBERS: The member declarations for the mirrored structs
+ *
+ * Used to create an anonymous union of two structs with identical layout
+ * and size: one anonymous and one named. The former's members can be used
+ * normally without sub-struct naming, and the latter can be used to
+ * reason about the start, end, and size of the group of struct members.
+ * The named struct can also be explicitly tagged for layer reuse, as well
+ * as both having struct attributes appended.
+ */
+#define __struct_group(TAG, NAME, ATTRS, MEMBERS...) \
+ union { \
+ struct { MEMBERS } ATTRS; \
+ struct TAG { MEMBERS } ATTRS NAME; \
+ }
+
+/**
+ * __DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union
+ *
+ * @TYPE: The type of each flexible array element
+ * @NAME: The name of the flexible array member
+ *
+ * In order to have a flexible array member in a union or alone in a
+ * struct, it needs to be wrapped in an anonymous struct with at least 1
+ * named member, but that member can be empty.
+ */
+#define __DECLARE_FLEX_ARRAY(TYPE, NAME) \
+ struct { \
+ struct { } __empty_ ## NAME; \
+ TYPE NAME[]; \
+ }
diff --git a/original/uapi/linux/surface_aggregator/cdev.h b/original/uapi/linux/surface_aggregator/cdev.h
index fbcce04..08f46b6 100644
--- a/original/uapi/linux/surface_aggregator/cdev.h
+++ b/original/uapi/linux/surface_aggregator/cdev.h
@@ -6,7 +6,7 @@
* device. This device provides direct user-space access to the SSAM EC.
* Intended for debugging and development.
*
- * Copyright (C) 2020 Maximilian Luz <luzmaximilian@gmail.com>
+ * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
*/
#ifndef _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H
@@ -73,6 +73,75 @@
} response;
} __attribute__((__packed__));
-#define SSAM_CDEV_REQUEST _IOWR(0xA5, 1, struct ssam_cdev_request)
+/**
+ * struct ssam_cdev_notifier_desc - Notifier descriptor.
+ * @priority: Priority value determining the order in which notifier
+ * callbacks will be called. A higher value means higher
+ * priority, i.e. the associated callback will be executed
+ * earlier than other (lower priority) callbacks.
+ * @target_category: The event target category for which this notifier should
+ * receive events.
+ *
+ * Specifies the notifier that should be registered or unregistered,
+ * specifically with which priority and for which target category of events.
+ */
+struct ssam_cdev_notifier_desc {
+ __s32 priority;
+ __u8 target_category;
+} __attribute__((__packed__));
+
+/**
+ * struct ssam_cdev_event_desc - Event descriptor.
+ * @reg: Registry via which the event will be enabled/disabled.
+ * @reg.target_category: Target category for the event registry requests.
+ * @reg.target_id: Target ID for the event registry requests.
+ * @reg.cid_enable: Command ID for the event-enable request.
+ * @reg.cid_disable: Command ID for the event-disable request.
+ * @id: ID specifying the event.
+ * @id.target_category: Target category of the event source.
+ * @id.instance: Instance ID of the event source.
+ * @flags: Flags used for enabling the event.
+ *
+ * Specifies which event should be enabled/disabled and how to do that.
+ */
+struct ssam_cdev_event_desc {
+ struct {
+ __u8 target_category;
+ __u8 target_id;
+ __u8 cid_enable;
+ __u8 cid_disable;
+ } reg;
+
+ struct {
+ __u8 target_category;
+ __u8 instance;
+ } id;
+
+ __u8 flags;
+} __attribute__((__packed__));
+
+/**
+ * struct ssam_cdev_event - SSAM event sent by the EC.
+ * @target_category: Target category of the event source. See &enum ssam_ssh_tc.
+ * @target_id: Target ID of the event source.
+ * @command_id: Command ID of the event.
+ * @instance_id: Instance ID of the event source.
+ * @length: Length of the event payload in bytes.
+ * @data: Event payload data.
+ */
+struct ssam_cdev_event {
+ __u8 target_category;
+ __u8 target_id;
+ __u8 command_id;
+ __u8 instance_id;
+ __u16 length;
+ __u8 data[];
+} __attribute__((__packed__));
+
+#define SSAM_CDEV_REQUEST _IOWR(0xA5, 1, struct ssam_cdev_request)
+#define SSAM_CDEV_NOTIF_REGISTER _IOW(0xA5, 2, struct ssam_cdev_notifier_desc)
+#define SSAM_CDEV_NOTIF_UNREGISTER _IOW(0xA5, 3, struct ssam_cdev_notifier_desc)
+#define SSAM_CDEV_EVENT_ENABLE _IOW(0xA5, 4, struct ssam_cdev_event_desc)
+#define SSAM_CDEV_EVENT_DISABLE _IOW(0xA5, 5, struct ssam_cdev_event_desc)
#endif /* _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H */
diff --git a/original/uapi/linux/surface_aggregator/dtx.h b/original/uapi/linux/surface_aggregator/dtx.h
new file mode 100644
index 0000000..0833aab
--- /dev/null
+++ b/original/uapi/linux/surface_aggregator/dtx.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Surface DTX (clipboard detachment system driver) user-space interface.
+ *
+ * Definitions, structs, and IOCTLs for the /dev/surface/dtx misc device. This
+ * device allows user-space to control the clipboard detachment process on
+ * Surface Book series devices.
+ *
+ * Copyright (C) 2020-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H
+#define _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* Status/error categories */
+#define SDTX_CATEGORY_STATUS 0x0000
+#define SDTX_CATEGORY_RUNTIME_ERROR 0x1000
+#define SDTX_CATEGORY_HARDWARE_ERROR 0x2000
+#define SDTX_CATEGORY_UNKNOWN 0xf000
+
+#define SDTX_CATEGORY_MASK 0xf000
+#define SDTX_CATEGORY(value) ((value) & SDTX_CATEGORY_MASK)
+
+#define SDTX_STATUS(code) ((code) | SDTX_CATEGORY_STATUS)
+#define SDTX_ERR_RT(code) ((code) | SDTX_CATEGORY_RUNTIME_ERROR)
+#define SDTX_ERR_HW(code) ((code) | SDTX_CATEGORY_HARDWARE_ERROR)
+#define SDTX_UNKNOWN(code) ((code) | SDTX_CATEGORY_UNKNOWN)
+
+#define SDTX_SUCCESS(value) (SDTX_CATEGORY(value) == SDTX_CATEGORY_STATUS)
+
+/* Latch status values */
+#define SDTX_LATCH_CLOSED SDTX_STATUS(0x00)
+#define SDTX_LATCH_OPENED SDTX_STATUS(0x01)
+
+/* Base state values */
+#define SDTX_BASE_DETACHED SDTX_STATUS(0x00)
+#define SDTX_BASE_ATTACHED SDTX_STATUS(0x01)
+
+/* Runtime errors (non-critical) */
+#define SDTX_DETACH_NOT_FEASIBLE SDTX_ERR_RT(0x01)
+#define SDTX_DETACH_TIMEDOUT SDTX_ERR_RT(0x02)
+
+/* Hardware errors (critical) */
+#define SDTX_ERR_FAILED_TO_OPEN SDTX_ERR_HW(0x01)
+#define SDTX_ERR_FAILED_TO_REMAIN_OPEN SDTX_ERR_HW(0x02)
+#define SDTX_ERR_FAILED_TO_CLOSE SDTX_ERR_HW(0x03)
+
+/* Base types */
+#define SDTX_DEVICE_TYPE_HID 0x0100
+#define SDTX_DEVICE_TYPE_SSH 0x0200
+
+#define SDTX_DEVICE_TYPE_MASK 0x0f00
+#define SDTX_DEVICE_TYPE(value) ((value) & SDTX_DEVICE_TYPE_MASK)
+
+#define SDTX_BASE_TYPE_HID(id) ((id) | SDTX_DEVICE_TYPE_HID)
+#define SDTX_BASE_TYPE_SSH(id) ((id) | SDTX_DEVICE_TYPE_SSH)
+
+/**
+ * enum sdtx_device_mode - Mode describing how (and if) the clipboard is
+ * attached to the base of the device.
+ * @SDTX_DEVICE_MODE_TABLET: The clipboard is detached from the base and the
+ * device operates as tablet.
+ * @SDTX_DEVICE_MODE_LAPTOP: The clipboard is attached normally to the base
+ * and the device operates as laptop.
+ * @SDTX_DEVICE_MODE_STUDIO: The clipboard is attached to the base in reverse.
+ * The device operates as tablet with keyboard and
+ * touchpad deactivated, however, the base battery
+ * and, if present in the specific device model, dGPU
+ * are available to the system.
+ */
+enum sdtx_device_mode {
+ SDTX_DEVICE_MODE_TABLET = 0x00,
+ SDTX_DEVICE_MODE_LAPTOP = 0x01,
+ SDTX_DEVICE_MODE_STUDIO = 0x02,
+};
+
+/**
+ * struct sdtx_event - Event provided by reading from the DTX device file.
+ * @length: Length of the event payload, in bytes.
+ * @code: Event code, detailing what type of event this is.
+ * @data: Payload of the event, containing @length bytes.
+ *
+ * See &enum sdtx_event_code for currently valid event codes.
+ */
+struct sdtx_event {
+ __u16 length;
+ __u16 code;
+ __u8 data[];
+} __attribute__((__packed__));
+
+/**
+ * enum sdtx_event_code - Code describing the type of an event.
+ * @SDTX_EVENT_REQUEST: Detachment request event type.
+ * @SDTX_EVENT_CANCEL: Cancel detachment process event type.
+ * @SDTX_EVENT_BASE_CONNECTION: Base/clipboard connection change event type.
+ * @SDTX_EVENT_LATCH_STATUS: Latch status change event type.
+ * @SDTX_EVENT_DEVICE_MODE: Device mode change event type.
+ *
+ * Used in &struct sdtx_event to describe the type of the event. Further event
+ * codes are reserved for future use. Any event parser should be able to
+ * gracefully handle unknown events, i.e. by simply skipping them.
+ *
+ * Consult the DTX user-space interface documentation for details regarding
+ * the individual event types.
+ */
+enum sdtx_event_code {
+ SDTX_EVENT_REQUEST = 1,
+ SDTX_EVENT_CANCEL = 2,
+ SDTX_EVENT_BASE_CONNECTION = 3,
+ SDTX_EVENT_LATCH_STATUS = 4,
+ SDTX_EVENT_DEVICE_MODE = 5,
+};
+
+/**
+ * struct sdtx_base_info - Describes if and what type of base is connected.
+ * @state: The state of the connection. Valid values are %SDTX_BASE_DETACHED,
+ * %SDTX_BASE_ATTACHED, and %SDTX_DETACH_NOT_FEASIBLE (in case a base
+ * is attached but low clipboard battery prevents detachment). Other
+ * values are currently reserved.
+ * @base_id: The type of base connected. Zero if no base is connected.
+ */
+struct sdtx_base_info {
+ __u16 state;
+ __u16 base_id;
+} __attribute__((__packed__));
+
+/* IOCTLs */
+#define SDTX_IOCTL_EVENTS_ENABLE _IO(0xa5, 0x21)
+#define SDTX_IOCTL_EVENTS_DISABLE _IO(0xa5, 0x22)
+
+#define SDTX_IOCTL_LATCH_LOCK _IO(0xa5, 0x23)
+#define SDTX_IOCTL_LATCH_UNLOCK _IO(0xa5, 0x24)
+
+#define SDTX_IOCTL_LATCH_REQUEST _IO(0xa5, 0x25)
+#define SDTX_IOCTL_LATCH_CONFIRM _IO(0xa5, 0x26)
+#define SDTX_IOCTL_LATCH_HEARTBEAT _IO(0xa5, 0x27)
+#define SDTX_IOCTL_LATCH_CANCEL _IO(0xa5, 0x28)
+
+#define SDTX_IOCTL_GET_BASE_INFO _IOR(0xa5, 0x29, struct sdtx_base_info)
+#define SDTX_IOCTL_GET_DEVICE_MODE _IOR(0xa5, 0x2a, __u16)
+#define SDTX_IOCTL_GET_LATCH_STATUS _IOR(0xa5, 0x2b, __u16)
+
+#endif /* _UAPI_LINUX_SURFACE_AGGREGATOR_DTX_H */
diff --git a/original/uapi/linux/sysctl.h b/original/uapi/linux/sysctl.h
index 1e05d3c..6a3b194 100644
--- a/original/uapi/linux/sysctl.h
+++ b/original/uapi/linux/sysctl.h
@@ -482,6 +482,7 @@
NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
NET_IPV4_CONF_ARP_ACCEPT=21,
NET_IPV4_CONF_ARP_NOTIFY=22,
+ NET_IPV4_CONF_ARP_EVICT_NOCARRIER=23,
};
/* /proc/sys/net/ipv4/netfilter */
diff --git a/original/uapi/linux/target_core_user.h b/original/uapi/linux/target_core_user.h
index 95b1597..27ace51 100644
--- a/original/uapi/linux/target_core_user.h
+++ b/original/uapi/linux/target_core_user.h
@@ -46,6 +46,7 @@
#define TCMU_MAILBOX_FLAG_CAP_OOOC (1 << 0) /* Out-of-order completions */
#define TCMU_MAILBOX_FLAG_CAP_READ_LEN (1 << 1) /* Read data length */
#define TCMU_MAILBOX_FLAG_CAP_TMR (1 << 2) /* TMR notifications */
+#define TCMU_MAILBOX_FLAG_CAP_KEEP_BUF (1<<3) /* Keep buf after cmd completion */
struct tcmu_mailbox {
__u16 version;
@@ -75,6 +76,7 @@
__u8 kflags;
#define TCMU_UFLAG_UNKNOWN_OP 0x1
#define TCMU_UFLAG_READ_LEN 0x2
+#define TCMU_UFLAG_KEEP_BUF 0x4
__u8 uflags;
} __packed;
diff --git a/original/uapi/linux/taskstats.h b/original/uapi/linux/taskstats.h
index ccbd087..12327d3 100644
--- a/original/uapi/linux/taskstats.h
+++ b/original/uapi/linux/taskstats.h
@@ -34,7 +34,7 @@
*/
-#define TASKSTATS_VERSION 10
+#define TASKSTATS_VERSION 11
#define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN
* in linux/sched.h */
@@ -172,6 +172,10 @@
/* v10: 64-bit btime to avoid overflow */
__u64 ac_btime64; /* 64-bit begin time */
+
+ /* Delay waiting for memory compact */
+ __u64 compact_count;
+ __u64 compact_delay_total;
};
diff --git a/original/uapi/linux/tc_act/tc_skbmod.h b/original/uapi/linux/tc_act/tc_skbmod.h
index c525b35..af6ef2c 100644
--- a/original/uapi/linux/tc_act/tc_skbmod.h
+++ b/original/uapi/linux/tc_act/tc_skbmod.h
@@ -17,6 +17,7 @@
#define SKBMOD_F_SMAC 0x2
#define SKBMOD_F_ETYPE 0x4
#define SKBMOD_F_SWAPMAC 0x8
+#define SKBMOD_F_ECN 0x10
struct tc_skbmod {
tc_gen;
diff --git a/original/uapi/linux/thermal.h b/original/uapi/linux/thermal.h
index c105054..9aa2fed 100644
--- a/original/uapi/linux/thermal.h
+++ b/original/uapi/linux/thermal.h
@@ -60,7 +60,7 @@
THERMAL_GENL_EVENT_UNSPEC,
THERMAL_GENL_EVENT_TZ_CREATE, /* Thermal zone creation */
THERMAL_GENL_EVENT_TZ_DELETE, /* Thermal zone deletion */
- THERMAL_GENL_EVENT_TZ_DISABLE, /* Thermal zone disabed */
+ THERMAL_GENL_EVENT_TZ_DISABLE, /* Thermal zone disabled */
THERMAL_GENL_EVENT_TZ_ENABLE, /* Thermal zone enabled */
THERMAL_GENL_EVENT_TZ_TRIP_UP, /* Trip point crossed the way up */
THERMAL_GENL_EVENT_TZ_TRIP_DOWN, /* Trip point crossed the way down */
diff --git a/original/uapi/linux/tls.h b/original/uapi/linux/tls.h
index 0d54bae..5f38be0 100644
--- a/original/uapi/linux/tls.h
+++ b/original/uapi/linux/tls.h
@@ -84,6 +84,20 @@
#define TLS_CIPHER_CHACHA20_POLY1305_TAG_SIZE 16
#define TLS_CIPHER_CHACHA20_POLY1305_REC_SEQ_SIZE 8
+#define TLS_CIPHER_SM4_GCM 55
+#define TLS_CIPHER_SM4_GCM_IV_SIZE 8
+#define TLS_CIPHER_SM4_GCM_KEY_SIZE 16
+#define TLS_CIPHER_SM4_GCM_SALT_SIZE 4
+#define TLS_CIPHER_SM4_GCM_TAG_SIZE 16
+#define TLS_CIPHER_SM4_GCM_REC_SEQ_SIZE 8
+
+#define TLS_CIPHER_SM4_CCM 56
+#define TLS_CIPHER_SM4_CCM_IV_SIZE 8
+#define TLS_CIPHER_SM4_CCM_KEY_SIZE 16
+#define TLS_CIPHER_SM4_CCM_SALT_SIZE 4
+#define TLS_CIPHER_SM4_CCM_TAG_SIZE 16
+#define TLS_CIPHER_SM4_CCM_REC_SEQ_SIZE 8
+
#define TLS_SET_RECORD_TYPE 1
#define TLS_GET_RECORD_TYPE 2
@@ -124,6 +138,22 @@
unsigned char rec_seq[TLS_CIPHER_CHACHA20_POLY1305_REC_SEQ_SIZE];
};
+struct tls12_crypto_info_sm4_gcm {
+ struct tls_crypto_info info;
+ unsigned char iv[TLS_CIPHER_SM4_GCM_IV_SIZE];
+ unsigned char key[TLS_CIPHER_SM4_GCM_KEY_SIZE];
+ unsigned char salt[TLS_CIPHER_SM4_GCM_SALT_SIZE];
+ unsigned char rec_seq[TLS_CIPHER_SM4_GCM_REC_SEQ_SIZE];
+};
+
+struct tls12_crypto_info_sm4_ccm {
+ struct tls_crypto_info info;
+ unsigned char iv[TLS_CIPHER_SM4_CCM_IV_SIZE];
+ unsigned char key[TLS_CIPHER_SM4_CCM_KEY_SIZE];
+ unsigned char salt[TLS_CIPHER_SM4_CCM_SALT_SIZE];
+ unsigned char rec_seq[TLS_CIPHER_SM4_CCM_REC_SEQ_SIZE];
+};
+
enum {
TLS_INFO_UNSPEC,
TLS_INFO_VERSION,
diff --git a/original/uapi/linux/tty.h b/original/uapi/linux/tty.h
index 376cccf..a58deb3 100644
--- a/original/uapi/linux/tty.h
+++ b/original/uapi/linux/tty.h
@@ -38,5 +38,6 @@
#define N_NCI 25 /* NFC NCI UART */
#define N_SPEAKUP 26 /* Speakup communication with synths */
#define N_NULL 27 /* Null ldisc used for error handling */
+#define N_MCTP 28 /* MCTP-over-serial */
#endif /* _UAPI_LINUX_TTY_H */
diff --git a/original/uapi/linux/tty_flags.h b/original/uapi/linux/tty_flags.h
index 900a32e..cf25056 100644
--- a/original/uapi/linux/tty_flags.h
+++ b/original/uapi/linux/tty_flags.h
@@ -39,7 +39,7 @@
* WARNING: These flags are no longer used and have been superceded by the
* TTY_PORT_ flags in the iflags field (and not userspace-visible)
*/
-#ifndef _KERNEL_
+#ifndef __KERNEL__
#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
@@ -73,15 +73,15 @@
#define ASYNC_MAGIC_MULTIPLIER (1U << ASYNCB_MAGIC_MULTIPLIER)
#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_DEPRECATED (ASYNC_SESSION_LOCKOUT | ASYNC_PGRP_LOCKOUT | \
- ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE)
+#define ASYNC_DEPRECATED (ASYNC_SPLIT_TERMIOS | ASYNC_SESSION_LOCKOUT | \
+ ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE)
#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
ASYNC_LOW_LATENCY)
#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-#ifndef _KERNEL_
+#ifndef __KERNEL__
/* These flags are no longer used (and were always masked from userspace) */
#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
diff --git a/original/uapi/linux/usb/video.h b/original/uapi/linux/usb/video.h
index d854cb1..bfdae12 100644
--- a/original/uapi/linux/usb/video.h
+++ b/original/uapi/linux/usb/video.h
@@ -302,9 +302,10 @@
__u8 bControlSize;
__u8 bmControls[2];
__u8 iProcessing;
+ __u8 bmVideoStandards;
} __attribute__((__packed__));
-#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n))
+#define UVC_DT_PROCESSING_UNIT_SIZE(n) (10+(n))
/* 3.7.2.6. Extension Unit Descriptor */
struct uvc_extension_unit_descriptor {
diff --git a/original/uapi/linux/userfaultfd.h b/original/uapi/linux/userfaultfd.h
index 5f2d882..05b31d6 100644
--- a/original/uapi/linux/userfaultfd.h
+++ b/original/uapi/linux/userfaultfd.h
@@ -19,15 +19,20 @@
* means the userland is reading).
*/
#define UFFD_API ((__u64)0xAA)
+#define UFFD_API_REGISTER_MODES (UFFDIO_REGISTER_MODE_MISSING | \
+ UFFDIO_REGISTER_MODE_WP | \
+ UFFDIO_REGISTER_MODE_MINOR)
#define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | \
UFFD_FEATURE_EVENT_FORK | \
UFFD_FEATURE_EVENT_REMAP | \
- UFFD_FEATURE_EVENT_REMOVE | \
+ UFFD_FEATURE_EVENT_REMOVE | \
UFFD_FEATURE_EVENT_UNMAP | \
UFFD_FEATURE_MISSING_HUGETLBFS | \
UFFD_FEATURE_MISSING_SHMEM | \
UFFD_FEATURE_SIGBUS | \
- UFFD_FEATURE_THREAD_ID)
+ UFFD_FEATURE_THREAD_ID | \
+ UFFD_FEATURE_MINOR_HUGETLBFS | \
+ UFFD_FEATURE_MINOR_SHMEM)
#define UFFD_API_IOCTLS \
((__u64)1 << _UFFDIO_REGISTER | \
(__u64)1 << _UFFDIO_UNREGISTER | \
@@ -36,10 +41,12 @@
((__u64)1 << _UFFDIO_WAKE | \
(__u64)1 << _UFFDIO_COPY | \
(__u64)1 << _UFFDIO_ZEROPAGE | \
- (__u64)1 << _UFFDIO_WRITEPROTECT)
+ (__u64)1 << _UFFDIO_WRITEPROTECT | \
+ (__u64)1 << _UFFDIO_CONTINUE)
#define UFFD_API_RANGE_IOCTLS_BASIC \
((__u64)1 << _UFFDIO_WAKE | \
- (__u64)1 << _UFFDIO_COPY)
+ (__u64)1 << _UFFDIO_COPY | \
+ (__u64)1 << _UFFDIO_CONTINUE)
/*
* Valid ioctl command number range with this API is from 0x00 to
@@ -55,6 +62,7 @@
#define _UFFDIO_COPY (0x03)
#define _UFFDIO_ZEROPAGE (0x04)
#define _UFFDIO_WRITEPROTECT (0x06)
+#define _UFFDIO_CONTINUE (0x07)
#define _UFFDIO_API (0x3F)
/* userfaultfd ioctl ids */
@@ -73,6 +81,8 @@
struct uffdio_zeropage)
#define UFFDIO_WRITEPROTECT _IOWR(UFFDIO, _UFFDIO_WRITEPROTECT, \
struct uffdio_writeprotect)
+#define UFFDIO_CONTINUE _IOWR(UFFDIO, _UFFDIO_CONTINUE, \
+ struct uffdio_continue)
/* read() structure */
struct uffd_msg {
@@ -127,6 +137,7 @@
/* flags for UFFD_EVENT_PAGEFAULT */
#define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */
#define UFFD_PAGEFAULT_FLAG_WP (1<<1) /* If reason is VM_UFFD_WP */
+#define UFFD_PAGEFAULT_FLAG_MINOR (1<<2) /* If reason is VM_UFFD_MINOR */
struct uffdio_api {
/* userland asks for an API number and the features to enable */
@@ -171,6 +182,13 @@
*
* UFFD_FEATURE_THREAD_ID pid of the page faulted task_struct will
* be returned, if feature is not requested 0 will be returned.
+ *
+ * UFFD_FEATURE_MINOR_HUGETLBFS indicates that minor faults
+ * can be intercepted (via REGISTER_MODE_MINOR) for
+ * hugetlbfs-backed pages.
+ *
+ * UFFD_FEATURE_MINOR_SHMEM indicates the same support as
+ * UFFD_FEATURE_MINOR_HUGETLBFS, but for shmem-backed pages instead.
*/
#define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0)
#define UFFD_FEATURE_EVENT_FORK (1<<1)
@@ -181,6 +199,8 @@
#define UFFD_FEATURE_EVENT_UNMAP (1<<6)
#define UFFD_FEATURE_SIGBUS (1<<7)
#define UFFD_FEATURE_THREAD_ID (1<<8)
+#define UFFD_FEATURE_MINOR_HUGETLBFS (1<<9)
+#define UFFD_FEATURE_MINOR_SHMEM (1<<10)
__u64 features;
__u64 ioctls;
@@ -195,6 +215,7 @@
struct uffdio_range range;
#define UFFDIO_REGISTER_MODE_MISSING ((__u64)1<<0)
#define UFFDIO_REGISTER_MODE_WP ((__u64)1<<1)
+#define UFFDIO_REGISTER_MODE_MINOR ((__u64)1<<2)
__u64 mode;
/*
@@ -257,6 +278,18 @@
__u64 mode;
};
+struct uffdio_continue {
+ struct uffdio_range range;
+#define UFFDIO_CONTINUE_MODE_DONTWAKE ((__u64)1<<0)
+ __u64 mode;
+
+ /*
+ * Fields below here are written by the ioctl and must be at the end:
+ * the copy_from_user will not read past here.
+ */
+ __s64 mapped;
+};
+
/*
* Flags for the userfaultfd(2) system call itself.
*/
diff --git a/original/uapi/linux/uuid.h b/original/uapi/linux/uuid.h
index e5a7eec..c0f4bd9 100644
--- a/original/uapi/linux/uuid.h
+++ b/original/uapi/linux/uuid.h
@@ -1,18 +1,10 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* DO NOT USE in new code! This is solely for MEI due to legacy reasons */
/*
* UUID/GUID definition
*
* Copyright (C) 2010, Intel Corp.
* Huang Ying <ying.huang@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation;
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#ifndef _UAPI_LINUX_UUID_H_
diff --git a/original/uapi/linux/uvcvideo.h b/original/uapi/linux/uvcvideo.h
index f80f05b..8288137 100644
--- a/original/uapi/linux/uvcvideo.h
+++ b/original/uapi/linux/uvcvideo.h
@@ -76,11 +76,11 @@
/**
* struct uvc_meta_buf - metadata buffer building block
- * @ns - system timestamp of the payload in nanoseconds
- * @sof - USB Frame Number
- * @length - length of the payload header
- * @flags - payload header flags
- * @buf - optional device-specific header data
+ * @ns: system timestamp of the payload in nanoseconds
+ * @sof: USB Frame Number
+ * @length: length of the payload header
+ * @flags: payload header flags
+ * @buf: optional device-specific header data
*
* UVC metadata nodes fill buffers with possibly multiple instances of this
* struct. The first two fields are added by the driver, they can be used for
diff --git a/original/uapi/linux/v4l2-controls.h b/original/uapi/linux/v4l2-controls.h
index 039c0d7..c8e0f84 100644
--- a/original/uapi/linux/v4l2-controls.h
+++ b/original/uapi/linux/v4l2-controls.h
@@ -50,6 +50,7 @@
#ifndef __LINUX_V4L2_CONTROLS_H
#define __LINUX_V4L2_CONTROLS_H
+#include <linux/const.h>
#include <linux/types.h>
/* Control classes */
@@ -66,6 +67,7 @@
#define V4L2_CTRL_CLASS_RF_TUNER 0x00a20000 /* RF tuner controls */
#define V4L2_CTRL_CLASS_DETECT 0x00a30000 /* Detection controls */
#define V4L2_CTRL_CLASS_CODEC_STATELESS 0x00a40000 /* Stateless codecs controls */
+#define V4L2_CTRL_CLASS_COLORIMETRY 0x00a50000 /* Colorimetry controls */
/* User-class control IDs */
@@ -126,6 +128,7 @@
V4L2_COLORFX_SOLARIZATION = 13,
V4L2_COLORFX_ANTIQUE = 14,
V4L2_COLORFX_SET_CBCR = 15,
+ V4L2_COLORFX_SET_RGB = 16,
};
#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33)
@@ -143,9 +146,10 @@
#define V4L2_CID_ALPHA_COMPONENT (V4L2_CID_BASE+41)
#define V4L2_CID_COLORFX_CBCR (V4L2_CID_BASE+42)
+#define V4L2_CID_COLORFX_RGB (V4L2_CID_BASE+43)
/* last CID + 1 */
-#define V4L2_CID_LASTP1 (V4L2_CID_BASE+43)
+#define V4L2_CID_LASTP1 (V4L2_CID_BASE+44)
/* USER-class private control IDs */
@@ -209,6 +213,11 @@
* We reserve 128 controls for this driver.
*/
#define V4L2_CID_USER_CCS_BASE (V4L2_CID_USER_BASE + 0x10f0)
+/*
+ * The base for Allegro driver controls.
+ * We reserve 16 controls for this driver.
+ */
+#define V4L2_CID_USER_ALLEGRO_BASE (V4L2_CID_USER_BASE + 0x1170)
/* MPEG-class control IDs */
/* The MPEG controls are applicable to all codec controls
@@ -428,6 +437,12 @@
#define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_CODEC_BASE+228)
#define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_CODEC_BASE+229)
#define V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (V4L2_CID_CODEC_BASE+230)
+#define V4L2_CID_MPEG_VIDEO_AU_DELIMITER (V4L2_CID_CODEC_BASE+231)
+#define V4L2_CID_MPEG_VIDEO_LTR_COUNT (V4L2_CID_CODEC_BASE+232)
+#define V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (V4L2_CID_CODEC_BASE+233)
+#define V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (V4L2_CID_CODEC_BASE+234)
+#define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (V4L2_CID_CODEC_BASE+235)
+#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (V4L2_CID_CODEC_BASE+236)
/* CIDs for the MPEG-2 Part 2 (H.262) codec */
#define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_CODEC_BASE+270)
@@ -797,6 +812,9 @@
#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (V4L2_CID_CODEC_BASE + 651)
#define V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (V4L2_CID_CODEC_BASE + 652)
+#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (V4L2_CID_CODEC_BASE + 653)
+#define V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (V4L2_CID_CODEC_BASE + 654)
+
/* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
#define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000)
#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0)
@@ -1107,6 +1125,7 @@
#define V4L2_CID_TEST_PATTERN_BLUE (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 6)
#define V4L2_CID_TEST_PATTERN_GREENB (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 7)
#define V4L2_CID_UNIT_CELL_SIZE (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 8)
+#define V4L2_CID_NOTIFY_GAINS (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 9)
/* Image processing controls */
@@ -1329,7 +1348,7 @@
* struct v4l2_ctrl_h264_pps - H264 picture parameter set
*
* Except where noted, all the members on this picture parameter set
- * structure match the sequence parameter set syntax as specified
+ * structure match the picture parameter set syntax as specified
* by the H264 specification.
*
* In particular, V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT flag
@@ -1593,30 +1612,30 @@
#define V4L2_FWHT_VERSION 3
/* Set if this is an interlaced format */
-#define V4L2_FWHT_FL_IS_INTERLACED BIT(0)
+#define V4L2_FWHT_FL_IS_INTERLACED _BITUL(0)
/* Set if this is a bottom-first (NTSC) interlaced format */
-#define V4L2_FWHT_FL_IS_BOTTOM_FIRST BIT(1)
+#define V4L2_FWHT_FL_IS_BOTTOM_FIRST _BITUL(1)
/* Set if each 'frame' contains just one field */
-#define V4L2_FWHT_FL_IS_ALTERNATE BIT(2)
+#define V4L2_FWHT_FL_IS_ALTERNATE _BITUL(2)
/*
* If V4L2_FWHT_FL_IS_ALTERNATE was set, then this is set if this
* 'frame' is the bottom field, else it is the top field.
*/
-#define V4L2_FWHT_FL_IS_BOTTOM_FIELD BIT(3)
+#define V4L2_FWHT_FL_IS_BOTTOM_FIELD _BITUL(3)
/* Set if the Y' plane is uncompressed */
-#define V4L2_FWHT_FL_LUMA_IS_UNCOMPRESSED BIT(4)
+#define V4L2_FWHT_FL_LUMA_IS_UNCOMPRESSED _BITUL(4)
/* Set if the Cb plane is uncompressed */
-#define V4L2_FWHT_FL_CB_IS_UNCOMPRESSED BIT(5)
+#define V4L2_FWHT_FL_CB_IS_UNCOMPRESSED _BITUL(5)
/* Set if the Cr plane is uncompressed */
-#define V4L2_FWHT_FL_CR_IS_UNCOMPRESSED BIT(6)
+#define V4L2_FWHT_FL_CR_IS_UNCOMPRESSED _BITUL(6)
/* Set if the chroma plane is full height, if cleared it is half height */
-#define V4L2_FWHT_FL_CHROMA_FULL_HEIGHT BIT(7)
+#define V4L2_FWHT_FL_CHROMA_FULL_HEIGHT _BITUL(7)
/* Set if the chroma plane is full width, if cleared it is half width */
-#define V4L2_FWHT_FL_CHROMA_FULL_WIDTH BIT(8)
+#define V4L2_FWHT_FL_CHROMA_FULL_WIDTH _BITUL(8)
/* Set if the alpha plane is uncompressed */
-#define V4L2_FWHT_FL_ALPHA_IS_UNCOMPRESSED BIT(9)
+#define V4L2_FWHT_FL_ALPHA_IS_UNCOMPRESSED _BITUL(9)
/* Set if this is an I Frame */
-#define V4L2_FWHT_FL_I_FRAME BIT(10)
+#define V4L2_FWHT_FL_I_FRAME _BITUL(10)
/* A 4-values flag - the number of components - 1 */
#define V4L2_FWHT_FL_COMPONENTS_NUM_MSK GENMASK(18, 16)
@@ -1657,6 +1676,632 @@
__u32 quantization;
};
+/* Stateless VP8 control */
+
+#define V4L2_VP8_SEGMENT_FLAG_ENABLED 0x01
+#define V4L2_VP8_SEGMENT_FLAG_UPDATE_MAP 0x02
+#define V4L2_VP8_SEGMENT_FLAG_UPDATE_FEATURE_DATA 0x04
+#define V4L2_VP8_SEGMENT_FLAG_DELTA_VALUE_MODE 0x08
+
+/**
+ * struct v4l2_vp8_segment - VP8 segment-based adjustments parameters
+ *
+ * @quant_update: update values for the segment quantizer.
+ * @lf_update: update values for the loop filter level.
+ * @segment_probs: branch probabilities of the segment_id decoding tree.
+ * @padding: padding field. Should be zeroed by applications.
+ * @flags: see V4L2_VP8_SEGMENT_FLAG_{}.
+ *
+ * This structure contains segment-based adjustments related parameters.
+ * See the 'update_segmentation()' part of the frame header syntax,
+ * and section '9.3. Segment-Based Adjustments' of the VP8 specification
+ * for more details.
+ */
+struct v4l2_vp8_segment {
+ __s8 quant_update[4];
+ __s8 lf_update[4];
+ __u8 segment_probs[3];
+ __u8 padding;
+ __u32 flags;
+};
+
+#define V4L2_VP8_LF_ADJ_ENABLE 0x01
+#define V4L2_VP8_LF_DELTA_UPDATE 0x02
+#define V4L2_VP8_LF_FILTER_TYPE_SIMPLE 0x04
+
+/**
+ * struct v4l2_vp8_loop_filter - VP8 loop filter parameters
+ *
+ * @ref_frm_delta: Reference frame signed delta values.
+ * @mb_mode_delta: MB prediction mode signed delta values.
+ * @sharpness_level: matches sharpness_level syntax element.
+ * @level: matches loop_filter_level syntax element.
+ * @padding: padding field. Should be zeroed by applications.
+ * @flags: see V4L2_VP8_LF_FLAG_{}.
+ *
+ * This structure contains loop filter related parameters.
+ * See the 'mb_lf_adjustments()' part of the frame header syntax,
+ * and section '9.4. Loop Filter Type and Levels' of the VP8 specification
+ * for more details.
+ */
+struct v4l2_vp8_loop_filter {
+ __s8 ref_frm_delta[4];
+ __s8 mb_mode_delta[4];
+ __u8 sharpness_level;
+ __u8 level;
+ __u16 padding;
+ __u32 flags;
+};
+
+/**
+ * struct v4l2_vp8_quantization - VP8 quantizattion indices
+ *
+ * @y_ac_qi: luma AC coefficient table index.
+ * @y_dc_delta: luma DC delta vaue.
+ * @y2_dc_delta: y2 block DC delta value.
+ * @y2_ac_delta: y2 block AC delta value.
+ * @uv_dc_delta: chroma DC delta value.
+ * @uv_ac_delta: chroma AC delta value.
+ * @padding: padding field. Should be zeroed by applications.
+ *
+ * This structure contains the quantization indices present
+ * in 'quant_indices()' part of the frame header syntax.
+ * See section '9.6. Dequantization Indices' of the VP8 specification
+ * for more details.
+ */
+struct v4l2_vp8_quantization {
+ __u8 y_ac_qi;
+ __s8 y_dc_delta;
+ __s8 y2_dc_delta;
+ __s8 y2_ac_delta;
+ __s8 uv_dc_delta;
+ __s8 uv_ac_delta;
+ __u16 padding;
+};
+
+#define V4L2_VP8_COEFF_PROB_CNT 11
+#define V4L2_VP8_MV_PROB_CNT 19
+
+/**
+ * struct v4l2_vp8_entropy - VP8 update probabilities
+ *
+ * @coeff_probs: coefficient probability update values.
+ * @y_mode_probs: luma intra-prediction probabilities.
+ * @uv_mode_probs: chroma intra-prediction probabilities.
+ * @mv_probs: mv decoding probability.
+ * @padding: padding field. Should be zeroed by applications.
+ *
+ * This structure contains the update probabilities present in
+ * 'token_prob_update()' and 'mv_prob_update()' part of the frame header.
+ * See section '17.2. Probability Updates' of the VP8 specification
+ * for more details.
+ */
+struct v4l2_vp8_entropy {
+ __u8 coeff_probs[4][8][3][V4L2_VP8_COEFF_PROB_CNT];
+ __u8 y_mode_probs[4];
+ __u8 uv_mode_probs[3];
+ __u8 mv_probs[2][V4L2_VP8_MV_PROB_CNT];
+ __u8 padding[3];
+};
+
+/**
+ * struct v4l2_vp8_entropy_coder_state - VP8 boolean coder state
+ *
+ * @range: coder state value for "Range"
+ * @value: coder state value for "Value"
+ * @bit_count: number of bits left in range "Value".
+ * @padding: padding field. Should be zeroed by applications.
+ *
+ * This structure contains the state for the boolean coder, as
+ * explained in section '7. Boolean Entropy Decoder' of the VP8 specification.
+ */
+struct v4l2_vp8_entropy_coder_state {
+ __u8 range;
+ __u8 value;
+ __u8 bit_count;
+ __u8 padding;
+};
+
+#define V4L2_VP8_FRAME_FLAG_KEY_FRAME 0x01
+#define V4L2_VP8_FRAME_FLAG_EXPERIMENTAL 0x02
+#define V4L2_VP8_FRAME_FLAG_SHOW_FRAME 0x04
+#define V4L2_VP8_FRAME_FLAG_MB_NO_SKIP_COEFF 0x08
+#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_GOLDEN 0x10
+#define V4L2_VP8_FRAME_FLAG_SIGN_BIAS_ALT 0x20
+
+#define V4L2_VP8_FRAME_IS_KEY_FRAME(hdr) \
+ (!!((hdr)->flags & V4L2_VP8_FRAME_FLAG_KEY_FRAME))
+
+#define V4L2_CID_STATELESS_VP8_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 200)
+/**
+ * struct v4l2_ctrl_vp8_frame - VP8 frame parameters
+ *
+ * @segment: segmentation parameters. See &v4l2_vp8_segment for more details
+ * @lf: loop filter parameters. See &v4l2_vp8_loop_filter for more details
+ * @quant: quantization parameters. See &v4l2_vp8_quantization for more details
+ * @entropy: update probabilities. See &v4l2_vp8_entropy for more details
+ * @coder_state: boolean coder state. See &v4l2_vp8_entropy_coder_state for more details
+ * @width: frame width.
+ * @height: frame height.
+ * @horizontal_scale: horizontal scaling factor.
+ * @vertical_scale: vertical scaling factor.
+ * @version: bitstream version.
+ * @prob_skip_false: frame header syntax element.
+ * @prob_intra: frame header syntax element.
+ * @prob_last: frame header syntax element.
+ * @prob_gf: frame header syntax element.
+ * @num_dct_parts: number of DCT coefficients partitions.
+ * @first_part_size: size of the first partition, i.e. the control partition.
+ * @first_part_header_bits: size in bits of the first partition header portion.
+ * @dct_part_sizes: DCT coefficients sizes.
+ * @last_frame_ts: "last" reference buffer timestamp.
+ * The timestamp refers to the timestamp field in struct v4l2_buffer.
+ * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
+ * @golden_frame_ts: "golden" reference buffer timestamp.
+ * @alt_frame_ts: "alt" reference buffer timestamp.
+ * @flags: see V4L2_VP8_FRAME_FLAG_{}.
+ */
+struct v4l2_ctrl_vp8_frame {
+ struct v4l2_vp8_segment segment;
+ struct v4l2_vp8_loop_filter lf;
+ struct v4l2_vp8_quantization quant;
+ struct v4l2_vp8_entropy entropy;
+ struct v4l2_vp8_entropy_coder_state coder_state;
+
+ __u16 width;
+ __u16 height;
+
+ __u8 horizontal_scale;
+ __u8 vertical_scale;
+
+ __u8 version;
+ __u8 prob_skip_false;
+ __u8 prob_intra;
+ __u8 prob_last;
+ __u8 prob_gf;
+ __u8 num_dct_parts;
+
+ __u32 first_part_size;
+ __u32 first_part_header_bits;
+ __u32 dct_part_sizes[8];
+
+ __u64 last_frame_ts;
+ __u64 golden_frame_ts;
+ __u64 alt_frame_ts;
+
+ __u64 flags;
+};
+
+/* Stateless MPEG-2 controls */
+
+#define V4L2_MPEG2_SEQ_FLAG_PROGRESSIVE 0x01
+
+#define V4L2_CID_STATELESS_MPEG2_SEQUENCE (V4L2_CID_CODEC_STATELESS_BASE+220)
+/**
+ * struct v4l2_ctrl_mpeg2_sequence - MPEG-2 sequence header
+ *
+ * All the members on this structure match the sequence header and sequence
+ * extension syntaxes as specified by the MPEG-2 specification.
+ *
+ * Fields horizontal_size, vertical_size and vbv_buffer_size are a
+ * combination of respective _value and extension syntax elements,
+ * as described in section 6.3.3 "Sequence header".
+ *
+ * @horizontal_size: combination of elements horizontal_size_value and
+ * horizontal_size_extension.
+ * @vertical_size: combination of elements vertical_size_value and
+ * vertical_size_extension.
+ * @vbv_buffer_size: combination of elements vbv_buffer_size_value and
+ * vbv_buffer_size_extension.
+ * @profile_and_level_indication: see MPEG-2 specification.
+ * @chroma_format: see MPEG-2 specification.
+ * @flags: see V4L2_MPEG2_SEQ_FLAG_{}.
+ */
+struct v4l2_ctrl_mpeg2_sequence {
+ __u16 horizontal_size;
+ __u16 vertical_size;
+ __u32 vbv_buffer_size;
+ __u16 profile_and_level_indication;
+ __u8 chroma_format;
+ __u8 flags;
+};
+
+#define V4L2_MPEG2_PIC_CODING_TYPE_I 1
+#define V4L2_MPEG2_PIC_CODING_TYPE_P 2
+#define V4L2_MPEG2_PIC_CODING_TYPE_B 3
+#define V4L2_MPEG2_PIC_CODING_TYPE_D 4
+
+#define V4L2_MPEG2_PIC_TOP_FIELD 0x1
+#define V4L2_MPEG2_PIC_BOTTOM_FIELD 0x2
+#define V4L2_MPEG2_PIC_FRAME 0x3
+
+#define V4L2_MPEG2_PIC_FLAG_TOP_FIELD_FIRST 0x0001
+#define V4L2_MPEG2_PIC_FLAG_FRAME_PRED_DCT 0x0002
+#define V4L2_MPEG2_PIC_FLAG_CONCEALMENT_MV 0x0004
+#define V4L2_MPEG2_PIC_FLAG_Q_SCALE_TYPE 0x0008
+#define V4L2_MPEG2_PIC_FLAG_INTRA_VLC 0x0010
+#define V4L2_MPEG2_PIC_FLAG_ALT_SCAN 0x0020
+#define V4L2_MPEG2_PIC_FLAG_REPEAT_FIRST 0x0040
+#define V4L2_MPEG2_PIC_FLAG_PROGRESSIVE 0x0080
+
+#define V4L2_CID_STATELESS_MPEG2_PICTURE (V4L2_CID_CODEC_STATELESS_BASE+221)
+/**
+ * struct v4l2_ctrl_mpeg2_picture - MPEG-2 picture header
+ *
+ * All the members on this structure match the picture header and picture
+ * coding extension syntaxes as specified by the MPEG-2 specification.
+ *
+ * @backward_ref_ts: timestamp of the V4L2 capture buffer to use as
+ * reference for backward prediction.
+ * @forward_ref_ts: timestamp of the V4L2 capture buffer to use as
+ * reference for forward prediction. These timestamp refers to the
+ * timestamp field in struct v4l2_buffer. Use v4l2_timeval_to_ns()
+ * to convert the struct timeval to a __u64.
+ * @flags: see V4L2_MPEG2_PIC_FLAG_{}.
+ * @f_code: see MPEG-2 specification.
+ * @picture_coding_type: see MPEG-2 specification.
+ * @picture_structure: see V4L2_MPEG2_PIC_{}_FIELD.
+ * @intra_dc_precision: see MPEG-2 specification.
+ * @reserved: padding field. Should be zeroed by applications.
+ */
+struct v4l2_ctrl_mpeg2_picture {
+ __u64 backward_ref_ts;
+ __u64 forward_ref_ts;
+ __u32 flags;
+ __u8 f_code[2][2];
+ __u8 picture_coding_type;
+ __u8 picture_structure;
+ __u8 intra_dc_precision;
+ __u8 reserved[5];
+};
+
+#define V4L2_CID_STATELESS_MPEG2_QUANTISATION (V4L2_CID_CODEC_STATELESS_BASE+222)
+/**
+ * struct v4l2_ctrl_mpeg2_quantisation - MPEG-2 quantisation
+ *
+ * Quantisation matrices as specified by section 6.3.7
+ * "Quant matrix extension".
+ *
+ * @intra_quantiser_matrix: The quantisation matrix coefficients
+ * for intra-coded frames, in zigzag scanning order. It is relevant
+ * for both luma and chroma components, although it can be superseded
+ * by the chroma-specific matrix for non-4:2:0 YUV formats.
+ * @non_intra_quantiser_matrix: The quantisation matrix coefficients
+ * for non-intra-coded frames, in zigzag scanning order. It is relevant
+ * for both luma and chroma components, although it can be superseded
+ * by the chroma-specific matrix for non-4:2:0 YUV formats.
+ * @chroma_intra_quantiser_matrix: The quantisation matrix coefficients
+ * for the chominance component of intra-coded frames, in zigzag scanning
+ * order. Only relevant for 4:2:2 and 4:4:4 YUV formats.
+ * @chroma_non_intra_quantiser_matrix: The quantisation matrix coefficients
+ * for the chrominance component of non-intra-coded frames, in zigzag scanning
+ * order. Only relevant for 4:2:2 and 4:4:4 YUV formats.
+ */
+struct v4l2_ctrl_mpeg2_quantisation {
+ __u8 intra_quantiser_matrix[64];
+ __u8 non_intra_quantiser_matrix[64];
+ __u8 chroma_intra_quantiser_matrix[64];
+ __u8 chroma_non_intra_quantiser_matrix[64];
+};
+
+#define V4L2_CID_COLORIMETRY_CLASS_BASE (V4L2_CTRL_CLASS_COLORIMETRY | 0x900)
+#define V4L2_CID_COLORIMETRY_CLASS (V4L2_CTRL_CLASS_COLORIMETRY | 1)
+
+#define V4L2_CID_COLORIMETRY_HDR10_CLL_INFO (V4L2_CID_COLORIMETRY_CLASS_BASE + 0)
+
+struct v4l2_ctrl_hdr10_cll_info {
+ __u16 max_content_light_level;
+ __u16 max_pic_average_light_level;
+};
+
+#define V4L2_CID_COLORIMETRY_HDR10_MASTERING_DISPLAY (V4L2_CID_COLORIMETRY_CLASS_BASE + 1)
+
+#define V4L2_HDR10_MASTERING_PRIMARIES_X_LOW 5
+#define V4L2_HDR10_MASTERING_PRIMARIES_X_HIGH 37000
+#define V4L2_HDR10_MASTERING_PRIMARIES_Y_LOW 5
+#define V4L2_HDR10_MASTERING_PRIMARIES_Y_HIGH 42000
+#define V4L2_HDR10_MASTERING_WHITE_POINT_X_LOW 5
+#define V4L2_HDR10_MASTERING_WHITE_POINT_X_HIGH 37000
+#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_LOW 5
+#define V4L2_HDR10_MASTERING_WHITE_POINT_Y_HIGH 42000
+#define V4L2_HDR10_MASTERING_MAX_LUMA_LOW 50000
+#define V4L2_HDR10_MASTERING_MAX_LUMA_HIGH 100000000
+#define V4L2_HDR10_MASTERING_MIN_LUMA_LOW 1
+#define V4L2_HDR10_MASTERING_MIN_LUMA_HIGH 50000
+
+struct v4l2_ctrl_hdr10_mastering_display {
+ __u16 display_primaries_x[3];
+ __u16 display_primaries_y[3];
+ __u16 white_point_x;
+ __u16 white_point_y;
+ __u32 max_display_mastering_luminance;
+ __u32 min_display_mastering_luminance;
+};
+
+/* Stateless VP9 controls */
+
+#define V4L2_VP9_LOOP_FILTER_FLAG_DELTA_ENABLED 0x1
+#define V4L2_VP9_LOOP_FILTER_FLAG_DELTA_UPDATE 0x2
+
+/**
+ * struct v4l2_vp9_loop_filter - VP9 loop filter parameters
+ *
+ * @ref_deltas: contains the adjustment needed for the filter level based on the
+ * chosen reference frame. If this syntax element is not present in the bitstream,
+ * users should pass its last value.
+ * @mode_deltas: contains the adjustment needed for the filter level based on the
+ * chosen mode. If this syntax element is not present in the bitstream, users should
+ * pass its last value.
+ * @level: indicates the loop filter strength.
+ * @sharpness: indicates the sharpness level.
+ * @flags: combination of V4L2_VP9_LOOP_FILTER_FLAG_{} flags.
+ * @reserved: padding field. Should be zeroed by applications.
+ *
+ * This structure contains all loop filter related parameters. See sections
+ * '7.2.8 Loop filter semantics' of the VP9 specification for more details.
+ */
+struct v4l2_vp9_loop_filter {
+ __s8 ref_deltas[4];
+ __s8 mode_deltas[2];
+ __u8 level;
+ __u8 sharpness;
+ __u8 flags;
+ __u8 reserved[7];
+};
+
+/**
+ * struct v4l2_vp9_quantization - VP9 quantization parameters
+ *
+ * @base_q_idx: indicates the base frame qindex.
+ * @delta_q_y_dc: indicates the Y DC quantizer relative to base_q_idx.
+ * @delta_q_uv_dc: indicates the UV DC quantizer relative to base_q_idx.
+ * @delta_q_uv_ac: indicates the UV AC quantizer relative to base_q_idx.
+ * @reserved: padding field. Should be zeroed by applications.
+ *
+ * Encodes the quantization parameters. See section '7.2.9 Quantization params
+ * syntax' of the VP9 specification for more details.
+ */
+struct v4l2_vp9_quantization {
+ __u8 base_q_idx;
+ __s8 delta_q_y_dc;
+ __s8 delta_q_uv_dc;
+ __s8 delta_q_uv_ac;
+ __u8 reserved[4];
+};
+
+#define V4L2_VP9_SEGMENTATION_FLAG_ENABLED 0x01
+#define V4L2_VP9_SEGMENTATION_FLAG_UPDATE_MAP 0x02
+#define V4L2_VP9_SEGMENTATION_FLAG_TEMPORAL_UPDATE 0x04
+#define V4L2_VP9_SEGMENTATION_FLAG_UPDATE_DATA 0x08
+#define V4L2_VP9_SEGMENTATION_FLAG_ABS_OR_DELTA_UPDATE 0x10
+
+#define V4L2_VP9_SEG_LVL_ALT_Q 0
+#define V4L2_VP9_SEG_LVL_ALT_L 1
+#define V4L2_VP9_SEG_LVL_REF_FRAME 2
+#define V4L2_VP9_SEG_LVL_SKIP 3
+#define V4L2_VP9_SEG_LVL_MAX 4
+
+#define V4L2_VP9_SEGMENT_FEATURE_ENABLED(id) (1 << (id))
+#define V4L2_VP9_SEGMENT_FEATURE_ENABLED_MASK 0xf
+
+/**
+ * struct v4l2_vp9_segmentation - VP9 segmentation parameters
+ *
+ * @feature_data: data attached to each feature. Data entry is only valid if
+ * the feature is enabled. The array shall be indexed with segment number as
+ * the first dimension (0..7) and one of V4L2_VP9_SEG_{} as the second dimension.
+ * @feature_enabled: bitmask defining which features are enabled in each segment.
+ * The value for each segment is a combination of V4L2_VP9_SEGMENT_FEATURE_ENABLED(id)
+ * values where id is one of V4L2_VP9_SEG_LVL_{}.
+ * @tree_probs: specifies the probability values to be used when decoding a
+ * Segment-ID. See '5.15. Segmentation map' section of the VP9 specification
+ * for more details.
+ * @pred_probs: specifies the probability values to be used when decoding a
+ * Predicted-Segment-ID. See '6.4.14. Get segment id syntax' section of :ref:`vp9`
+ * for more details.
+ * @flags: combination of V4L2_VP9_SEGMENTATION_FLAG_{} flags.
+ * @reserved: padding field. Should be zeroed by applications.
+ *
+ * Encodes the quantization parameters. See section '7.2.10 Segmentation params syntax' of
+ * the VP9 specification for more details.
+ */
+struct v4l2_vp9_segmentation {
+ __s16 feature_data[8][4];
+ __u8 feature_enabled[8];
+ __u8 tree_probs[7];
+ __u8 pred_probs[3];
+ __u8 flags;
+ __u8 reserved[5];
+};
+
+#define V4L2_VP9_FRAME_FLAG_KEY_FRAME 0x001
+#define V4L2_VP9_FRAME_FLAG_SHOW_FRAME 0x002
+#define V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT 0x004
+#define V4L2_VP9_FRAME_FLAG_INTRA_ONLY 0x008
+#define V4L2_VP9_FRAME_FLAG_ALLOW_HIGH_PREC_MV 0x010
+#define V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX 0x020
+#define V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE 0x040
+#define V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING 0x080
+#define V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING 0x100
+#define V4L2_VP9_FRAME_FLAG_COLOR_RANGE_FULL_SWING 0x200
+
+#define V4L2_VP9_SIGN_BIAS_LAST 0x1
+#define V4L2_VP9_SIGN_BIAS_GOLDEN 0x2
+#define V4L2_VP9_SIGN_BIAS_ALT 0x4
+
+#define V4L2_VP9_RESET_FRAME_CTX_NONE 0
+#define V4L2_VP9_RESET_FRAME_CTX_SPEC 1
+#define V4L2_VP9_RESET_FRAME_CTX_ALL 2
+
+#define V4L2_VP9_INTERP_FILTER_EIGHTTAP 0
+#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SMOOTH 1
+#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SHARP 2
+#define V4L2_VP9_INTERP_FILTER_BILINEAR 3
+#define V4L2_VP9_INTERP_FILTER_SWITCHABLE 4
+
+#define V4L2_VP9_REFERENCE_MODE_SINGLE_REFERENCE 0
+#define V4L2_VP9_REFERENCE_MODE_COMPOUND_REFERENCE 1
+#define V4L2_VP9_REFERENCE_MODE_SELECT 2
+
+#define V4L2_VP9_PROFILE_MAX 3
+
+#define V4L2_CID_STATELESS_VP9_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 300)
+/**
+ * struct v4l2_ctrl_vp9_frame - VP9 frame decoding control
+ *
+ * @lf: loop filter parameters. See &v4l2_vp9_loop_filter for more details.
+ * @quant: quantization parameters. See &v4l2_vp9_quantization for more details.
+ * @seg: segmentation parameters. See &v4l2_vp9_segmentation for more details.
+ * @flags: combination of V4L2_VP9_FRAME_FLAG_{} flags.
+ * @compressed_header_size: compressed header size in bytes.
+ * @uncompressed_header_size: uncompressed header size in bytes.
+ * @frame_width_minus_1: add 1 to it and you'll get the frame width expressed in pixels.
+ * @frame_height_minus_1: add 1 to it and you'll get the frame height expressed in pixels.
+ * @render_width_minus_1: add 1 to it and you'll get the expected render width expressed in
+ * pixels. This is not used during the decoding process but might be used by HW scalers
+ * to prepare a frame that's ready for scanout.
+ * @render_height_minus_1: add 1 to it and you'll get the expected render height expressed in
+ * pixels. This is not used during the decoding process but might be used by HW scalers
+ * to prepare a frame that's ready for scanout.
+ * @last_frame_ts: "last" reference buffer timestamp.
+ * The timestamp refers to the timestamp field in struct v4l2_buffer.
+ * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
+ * @golden_frame_ts: "golden" reference buffer timestamp.
+ * The timestamp refers to the timestamp field in struct v4l2_buffer.
+ * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
+ * @alt_frame_ts: "alt" reference buffer timestamp.
+ * The timestamp refers to the timestamp field in struct v4l2_buffer.
+ * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
+ * @ref_frame_sign_bias: a bitfield specifying whether the sign bias is set for a given
+ * reference frame. Either of V4L2_VP9_SIGN_BIAS_{}.
+ * @reset_frame_context: specifies whether the frame context should be reset to default values.
+ * Either of V4L2_VP9_RESET_FRAME_CTX_{}.
+ * @frame_context_idx: frame context that should be used/updated.
+ * @profile: VP9 profile. Can be 0, 1, 2 or 3.
+ * @bit_depth: bits per components. Can be 8, 10 or 12. Note that not all profiles support
+ * 10 and/or 12 bits depths.
+ * @interpolation_filter: specifies the filter selection used for performing inter prediction.
+ * Set to one of V4L2_VP9_INTERP_FILTER_{}.
+ * @tile_cols_log2: specifies the base 2 logarithm of the width of each tile (where the width
+ * is measured in units of 8x8 blocks). Shall be less than or equal to 6.
+ * @tile_rows_log2: specifies the base 2 logarithm of the height of each tile (where the height
+ * is measured in units of 8x8 blocks).
+ * @reference_mode: specifies the type of inter prediction to be used.
+ * Set to one of V4L2_VP9_REFERENCE_MODE_{}.
+ * @reserved: padding field. Should be zeroed by applications.
+ */
+struct v4l2_ctrl_vp9_frame {
+ struct v4l2_vp9_loop_filter lf;
+ struct v4l2_vp9_quantization quant;
+ struct v4l2_vp9_segmentation seg;
+ __u32 flags;
+ __u16 compressed_header_size;
+ __u16 uncompressed_header_size;
+ __u16 frame_width_minus_1;
+ __u16 frame_height_minus_1;
+ __u16 render_width_minus_1;
+ __u16 render_height_minus_1;
+ __u64 last_frame_ts;
+ __u64 golden_frame_ts;
+ __u64 alt_frame_ts;
+ __u8 ref_frame_sign_bias;
+ __u8 reset_frame_context;
+ __u8 frame_context_idx;
+ __u8 profile;
+ __u8 bit_depth;
+ __u8 interpolation_filter;
+ __u8 tile_cols_log2;
+ __u8 tile_rows_log2;
+ __u8 reference_mode;
+ __u8 reserved[7];
+};
+
+#define V4L2_VP9_NUM_FRAME_CTX 4
+
+/**
+ * struct v4l2_vp9_mv_probs - VP9 Motion vector probability updates
+ * @joint: motion vector joint probability updates.
+ * @sign: motion vector sign probability updates.
+ * @classes: motion vector class probability updates.
+ * @class0_bit: motion vector class0 bit probability updates.
+ * @bits: motion vector bits probability updates.
+ * @class0_fr: motion vector class0 fractional bit probability updates.
+ * @fr: motion vector fractional bit probability updates.
+ * @class0_hp: motion vector class0 high precision fractional bit probability updates.
+ * @hp: motion vector high precision fractional bit probability updates.
+ *
+ * This structure contains new values of motion vector probabilities.
+ * A value of zero in an array element means there is no update of the relevant probability.
+ * See `struct v4l2_vp9_prob_updates` for details.
+ */
+struct v4l2_vp9_mv_probs {
+ __u8 joint[3];
+ __u8 sign[2];
+ __u8 classes[2][10];
+ __u8 class0_bit[2];
+ __u8 bits[2][10];
+ __u8 class0_fr[2][2][3];
+ __u8 fr[2][3];
+ __u8 class0_hp[2];
+ __u8 hp[2];
+};
+
+#define V4L2_CID_STATELESS_VP9_COMPRESSED_HDR (V4L2_CID_CODEC_STATELESS_BASE + 301)
+
+#define V4L2_VP9_TX_MODE_ONLY_4X4 0
+#define V4L2_VP9_TX_MODE_ALLOW_8X8 1
+#define V4L2_VP9_TX_MODE_ALLOW_16X16 2
+#define V4L2_VP9_TX_MODE_ALLOW_32X32 3
+#define V4L2_VP9_TX_MODE_SELECT 4
+
+/**
+ * struct v4l2_ctrl_vp9_compressed_hdr - VP9 probability updates control
+ * @tx_mode: specifies the TX mode. Set to one of V4L2_VP9_TX_MODE_{}.
+ * @tx8: TX 8x8 probability updates.
+ * @tx16: TX 16x16 probability updates.
+ * @tx32: TX 32x32 probability updates.
+ * @coef: coefficient probability updates.
+ * @skip: skip probability updates.
+ * @inter_mode: inter mode probability updates.
+ * @interp_filter: interpolation filter probability updates.
+ * @is_inter: is inter-block probability updates.
+ * @comp_mode: compound prediction mode probability updates.
+ * @single_ref: single ref probability updates.
+ * @comp_ref: compound ref probability updates.
+ * @y_mode: Y prediction mode probability updates.
+ * @uv_mode: UV prediction mode probability updates.
+ * @partition: partition probability updates.
+ * @mv: motion vector probability updates.
+ *
+ * This structure holds the probabilities update as parsed in the compressed
+ * header (Spec 6.3). These values represent the value of probability update after
+ * being translated with inv_map_table[] (see 6.3.5). A value of zero in an array element
+ * means that there is no update of the relevant probability.
+ *
+ * This control is optional and needs to be used when dealing with the hardware which is
+ * not capable of parsing the compressed header itself. Only drivers which need it will
+ * implement it.
+ */
+struct v4l2_ctrl_vp9_compressed_hdr {
+ __u8 tx_mode;
+ __u8 tx8[2][1];
+ __u8 tx16[2][2];
+ __u8 tx32[2][3];
+ __u8 coef[4][2][2][6][6][3];
+ __u8 skip[3];
+ __u8 inter_mode[7][3];
+ __u8 interp_filter[4][2];
+ __u8 is_inter[4];
+ __u8 comp_mode[5];
+ __u8 single_ref[5][2];
+ __u8 comp_ref[5];
+ __u8 y_mode[4][9];
+ __u8 uv_mode[10][9];
+ __u8 partition[16][3];
+
+ struct v4l2_vp9_mv_probs mv;
+};
+
/* MPEG-compression definitions kept for backwards compatibility */
#ifndef __KERNEL__
#define V4L2_CTRL_CLASS_MPEG V4L2_CTRL_CLASS_CODEC
diff --git a/original/uapi/linux/v4l2-subdev.h b/original/uapi/linux/v4l2-subdev.h
index a38454d..658106f 100644
--- a/original/uapi/linux/v4l2-subdev.h
+++ b/original/uapi/linux/v4l2-subdev.h
@@ -44,6 +44,7 @@
* @which: format type (from enum v4l2_subdev_format_whence)
* @pad: pad number, as reported by the media API
* @format: media bus format (format code and frame size)
+ * @reserved: drivers and applications must zero this array
*/
struct v4l2_subdev_format {
__u32 which;
@@ -57,6 +58,7 @@
* @which: format type (from enum v4l2_subdev_format_whence)
* @pad: pad number, as reported by the media API
* @rect: pad crop rectangle boundaries
+ * @reserved: drivers and applications must zero this array
*/
struct v4l2_subdev_crop {
__u32 which;
@@ -78,6 +80,7 @@
* @code: format code (MEDIA_BUS_FMT_ definitions)
* @which: format type (from enum v4l2_subdev_format_whence)
* @flags: flags set by the driver, (V4L2_SUBDEV_MBUS_CODE_*)
+ * @reserved: drivers and applications must zero this array
*/
struct v4l2_subdev_mbus_code_enum {
__u32 pad;
@@ -90,10 +93,15 @@
/**
* struct v4l2_subdev_frame_size_enum - Media bus format enumeration
- * @pad: pad number, as reported by the media API
* @index: format index during enumeration
+ * @pad: pad number, as reported by the media API
* @code: format code (MEDIA_BUS_FMT_ definitions)
+ * @min_width: minimum frame width, in pixels
+ * @max_width: maximum frame width, in pixels
+ * @min_height: minimum frame height, in pixels
+ * @max_height: maximum frame height, in pixels
* @which: format type (from enum v4l2_subdev_format_whence)
+ * @reserved: drivers and applications must zero this array
*/
struct v4l2_subdev_frame_size_enum {
__u32 index;
@@ -111,6 +119,7 @@
* struct v4l2_subdev_frame_interval - Pad-level frame rate
* @pad: pad number, as reported by the media API
* @interval: frame interval in seconds
+ * @reserved: drivers and applications must zero this array
*/
struct v4l2_subdev_frame_interval {
__u32 pad;
@@ -127,6 +136,7 @@
* @height: frame height in pixels
* @interval: frame interval in seconds
* @which: format type (from enum v4l2_subdev_format_whence)
+ * @reserved: drivers and applications must zero this array
*/
struct v4l2_subdev_frame_interval_enum {
__u32 index;
diff --git a/original/uapi/linux/vdpa.h b/original/uapi/linux/vdpa.h
index 66a41e4..1061d8d 100644
--- a/original/uapi/linux/vdpa.h
+++ b/original/uapi/linux/vdpa.h
@@ -17,11 +17,15 @@
VDPA_CMD_DEV_NEW,
VDPA_CMD_DEV_DEL,
VDPA_CMD_DEV_GET, /* can dump */
+ VDPA_CMD_DEV_CONFIG_GET, /* can dump */
};
enum vdpa_attr {
VDPA_ATTR_UNSPEC,
+ /* Pad attribute for 64b alignment */
+ VDPA_ATTR_PAD = VDPA_ATTR_UNSPEC,
+
/* bus name (optional) + dev name together make the parent device handle */
VDPA_ATTR_MGMTDEV_BUS_NAME, /* string */
VDPA_ATTR_MGMTDEV_DEV_NAME, /* string */
@@ -32,7 +36,16 @@
VDPA_ATTR_DEV_VENDOR_ID, /* u32 */
VDPA_ATTR_DEV_MAX_VQS, /* u32 */
VDPA_ATTR_DEV_MAX_VQ_SIZE, /* u16 */
+ VDPA_ATTR_DEV_MIN_VQ_SIZE, /* u16 */
+ VDPA_ATTR_DEV_NET_CFG_MACADDR, /* binary */
+ VDPA_ATTR_DEV_NET_STATUS, /* u8 */
+ VDPA_ATTR_DEV_NET_CFG_MAX_VQP, /* u16 */
+ VDPA_ATTR_DEV_NET_CFG_MTU, /* u16 */
+
+ VDPA_ATTR_DEV_NEGOTIATED_FEATURES, /* u64 */
+ VDPA_ATTR_DEV_MGMTDEV_MAX_VQS, /* u32 */
+ VDPA_ATTR_DEV_SUPPORTED_FEATURES, /* u64 */
/* new attributes must be added above here */
VDPA_ATTR_MAX,
};
diff --git a/original/uapi/linux/vduse.h b/original/uapi/linux/vduse.h
new file mode 100644
index 0000000..7cfe1c1
--- /dev/null
+++ b/original/uapi/linux/vduse.h
@@ -0,0 +1,306 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_VDUSE_H_
+#define _UAPI_VDUSE_H_
+
+#include <linux/types.h>
+
+#define VDUSE_BASE 0x81
+
+/* The ioctls for control device (/dev/vduse/control) */
+
+#define VDUSE_API_VERSION 0
+
+/*
+ * Get the version of VDUSE API that kernel supported (VDUSE_API_VERSION).
+ * This is used for future extension.
+ */
+#define VDUSE_GET_API_VERSION _IOR(VDUSE_BASE, 0x00, __u64)
+
+/* Set the version of VDUSE API that userspace supported. */
+#define VDUSE_SET_API_VERSION _IOW(VDUSE_BASE, 0x01, __u64)
+
+/**
+ * struct vduse_dev_config - basic configuration of a VDUSE device
+ * @name: VDUSE device name, needs to be NUL terminated
+ * @vendor_id: virtio vendor id
+ * @device_id: virtio device id
+ * @features: virtio features
+ * @vq_num: the number of virtqueues
+ * @vq_align: the allocation alignment of virtqueue's metadata
+ * @reserved: for future use, needs to be initialized to zero
+ * @config_size: the size of the configuration space
+ * @config: the buffer of the configuration space
+ *
+ * Structure used by VDUSE_CREATE_DEV ioctl to create VDUSE device.
+ */
+struct vduse_dev_config {
+#define VDUSE_NAME_MAX 256
+ char name[VDUSE_NAME_MAX];
+ __u32 vendor_id;
+ __u32 device_id;
+ __u64 features;
+ __u32 vq_num;
+ __u32 vq_align;
+ __u32 reserved[13];
+ __u32 config_size;
+ __u8 config[];
+};
+
+/* Create a VDUSE device which is represented by a char device (/dev/vduse/$NAME) */
+#define VDUSE_CREATE_DEV _IOW(VDUSE_BASE, 0x02, struct vduse_dev_config)
+
+/*
+ * Destroy a VDUSE device. Make sure there are no more references
+ * to the char device (/dev/vduse/$NAME).
+ */
+#define VDUSE_DESTROY_DEV _IOW(VDUSE_BASE, 0x03, char[VDUSE_NAME_MAX])
+
+/* The ioctls for VDUSE device (/dev/vduse/$NAME) */
+
+/**
+ * struct vduse_iotlb_entry - entry of IOTLB to describe one IOVA region [start, last]
+ * @offset: the mmap offset on returned file descriptor
+ * @start: start of the IOVA region
+ * @last: last of the IOVA region
+ * @perm: access permission of the IOVA region
+ *
+ * Structure used by VDUSE_IOTLB_GET_FD ioctl to find an overlapped IOVA region.
+ */
+struct vduse_iotlb_entry {
+ __u64 offset;
+ __u64 start;
+ __u64 last;
+#define VDUSE_ACCESS_RO 0x1
+#define VDUSE_ACCESS_WO 0x2
+#define VDUSE_ACCESS_RW 0x3
+ __u8 perm;
+};
+
+/*
+ * Find the first IOVA region that overlaps with the range [start, last]
+ * and return the corresponding file descriptor. Return -EINVAL means the
+ * IOVA region doesn't exist. Caller should set start and last fields.
+ */
+#define VDUSE_IOTLB_GET_FD _IOWR(VDUSE_BASE, 0x10, struct vduse_iotlb_entry)
+
+/*
+ * Get the negotiated virtio features. It's a subset of the features in
+ * struct vduse_dev_config which can be accepted by virtio driver. It's
+ * only valid after FEATURES_OK status bit is set.
+ */
+#define VDUSE_DEV_GET_FEATURES _IOR(VDUSE_BASE, 0x11, __u64)
+
+/**
+ * struct vduse_config_data - data used to update configuration space
+ * @offset: the offset from the beginning of configuration space
+ * @length: the length to write to configuration space
+ * @buffer: the buffer used to write from
+ *
+ * Structure used by VDUSE_DEV_SET_CONFIG ioctl to update device
+ * configuration space.
+ */
+struct vduse_config_data {
+ __u32 offset;
+ __u32 length;
+ __u8 buffer[];
+};
+
+/* Set device configuration space */
+#define VDUSE_DEV_SET_CONFIG _IOW(VDUSE_BASE, 0x12, struct vduse_config_data)
+
+/*
+ * Inject a config interrupt. It's usually used to notify virtio driver
+ * that device configuration space has changed.
+ */
+#define VDUSE_DEV_INJECT_CONFIG_IRQ _IO(VDUSE_BASE, 0x13)
+
+/**
+ * struct vduse_vq_config - basic configuration of a virtqueue
+ * @index: virtqueue index
+ * @max_size: the max size of virtqueue
+ * @reserved: for future use, needs to be initialized to zero
+ *
+ * Structure used by VDUSE_VQ_SETUP ioctl to setup a virtqueue.
+ */
+struct vduse_vq_config {
+ __u32 index;
+ __u16 max_size;
+ __u16 reserved[13];
+};
+
+/*
+ * Setup the specified virtqueue. Make sure all virtqueues have been
+ * configured before the device is attached to vDPA bus.
+ */
+#define VDUSE_VQ_SETUP _IOW(VDUSE_BASE, 0x14, struct vduse_vq_config)
+
+/**
+ * struct vduse_vq_state_split - split virtqueue state
+ * @avail_index: available index
+ */
+struct vduse_vq_state_split {
+ __u16 avail_index;
+};
+
+/**
+ * struct vduse_vq_state_packed - packed virtqueue state
+ * @last_avail_counter: last driver ring wrap counter observed by device
+ * @last_avail_idx: device available index
+ * @last_used_counter: device ring wrap counter
+ * @last_used_idx: used index
+ */
+struct vduse_vq_state_packed {
+ __u16 last_avail_counter;
+ __u16 last_avail_idx;
+ __u16 last_used_counter;
+ __u16 last_used_idx;
+};
+
+/**
+ * struct vduse_vq_info - information of a virtqueue
+ * @index: virtqueue index
+ * @num: the size of virtqueue
+ * @desc_addr: address of desc area
+ * @driver_addr: address of driver area
+ * @device_addr: address of device area
+ * @split: split virtqueue state
+ * @packed: packed virtqueue state
+ * @ready: ready status of virtqueue
+ *
+ * Structure used by VDUSE_VQ_GET_INFO ioctl to get virtqueue's information.
+ */
+struct vduse_vq_info {
+ __u32 index;
+ __u32 num;
+ __u64 desc_addr;
+ __u64 driver_addr;
+ __u64 device_addr;
+ union {
+ struct vduse_vq_state_split split;
+ struct vduse_vq_state_packed packed;
+ };
+ __u8 ready;
+};
+
+/* Get the specified virtqueue's information. Caller should set index field. */
+#define VDUSE_VQ_GET_INFO _IOWR(VDUSE_BASE, 0x15, struct vduse_vq_info)
+
+/**
+ * struct vduse_vq_eventfd - eventfd configuration for a virtqueue
+ * @index: virtqueue index
+ * @fd: eventfd, -1 means de-assigning the eventfd
+ *
+ * Structure used by VDUSE_VQ_SETUP_KICKFD ioctl to setup kick eventfd.
+ */
+struct vduse_vq_eventfd {
+ __u32 index;
+#define VDUSE_EVENTFD_DEASSIGN -1
+ int fd;
+};
+
+/*
+ * Setup kick eventfd for specified virtqueue. The kick eventfd is used
+ * by VDUSE kernel module to notify userspace to consume the avail vring.
+ */
+#define VDUSE_VQ_SETUP_KICKFD _IOW(VDUSE_BASE, 0x16, struct vduse_vq_eventfd)
+
+/*
+ * Inject an interrupt for specific virtqueue. It's used to notify virtio driver
+ * to consume the used vring.
+ */
+#define VDUSE_VQ_INJECT_IRQ _IOW(VDUSE_BASE, 0x17, __u32)
+
+/* The control messages definition for read(2)/write(2) on /dev/vduse/$NAME */
+
+/**
+ * enum vduse_req_type - request type
+ * @VDUSE_GET_VQ_STATE: get the state for specified virtqueue from userspace
+ * @VDUSE_SET_STATUS: set the device status
+ * @VDUSE_UPDATE_IOTLB: Notify userspace to update the memory mapping for
+ * specified IOVA range via VDUSE_IOTLB_GET_FD ioctl
+ */
+enum vduse_req_type {
+ VDUSE_GET_VQ_STATE,
+ VDUSE_SET_STATUS,
+ VDUSE_UPDATE_IOTLB,
+};
+
+/**
+ * struct vduse_vq_state - virtqueue state
+ * @index: virtqueue index
+ * @split: split virtqueue state
+ * @packed: packed virtqueue state
+ */
+struct vduse_vq_state {
+ __u32 index;
+ union {
+ struct vduse_vq_state_split split;
+ struct vduse_vq_state_packed packed;
+ };
+};
+
+/**
+ * struct vduse_dev_status - device status
+ * @status: device status
+ */
+struct vduse_dev_status {
+ __u8 status;
+};
+
+/**
+ * struct vduse_iova_range - IOVA range [start, last]
+ * @start: start of the IOVA range
+ * @last: last of the IOVA range
+ */
+struct vduse_iova_range {
+ __u64 start;
+ __u64 last;
+};
+
+/**
+ * struct vduse_dev_request - control request
+ * @type: request type
+ * @request_id: request id
+ * @reserved: for future use
+ * @vq_state: virtqueue state, only index field is available
+ * @s: device status
+ * @iova: IOVA range for updating
+ * @padding: padding
+ *
+ * Structure used by read(2) on /dev/vduse/$NAME.
+ */
+struct vduse_dev_request {
+ __u32 type;
+ __u32 request_id;
+ __u32 reserved[4];
+ union {
+ struct vduse_vq_state vq_state;
+ struct vduse_dev_status s;
+ struct vduse_iova_range iova;
+ __u32 padding[32];
+ };
+};
+
+/**
+ * struct vduse_dev_response - response to control request
+ * @request_id: corresponding request id
+ * @result: the result of request
+ * @reserved: for future use, needs to be initialized to zero
+ * @vq_state: virtqueue state
+ * @padding: padding
+ *
+ * Structure used by write(2) on /dev/vduse/$NAME.
+ */
+struct vduse_dev_response {
+ __u32 request_id;
+#define VDUSE_REQ_RESULT_OK 0x00
+#define VDUSE_REQ_RESULT_FAILED 0x01
+ __u32 result;
+ __u32 reserved[4];
+ union {
+ struct vduse_vq_state vq_state;
+ __u32 padding[32];
+ };
+};
+
+#endif /* _UAPI_VDUSE_H_ */
diff --git a/original/uapi/linux/version.h b/original/uapi/linux/version.h
index 535b224..fb68148 100644
--- a/original/uapi/linux/version.h
+++ b/original/uapi/linux/version.h
@@ -1,5 +1,5 @@
-#define LINUX_VERSION_CODE 330752
+#define LINUX_VERSION_CODE 332032
#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + ((c) > 255 ? 255 : (c)))
#define LINUX_VERSION_MAJOR 5
-#define LINUX_VERSION_PATCHLEVEL 12
+#define LINUX_VERSION_PATCHLEVEL 17
#define LINUX_VERSION_SUBLEVEL 0
diff --git a/original/uapi/linux/vfio.h b/original/uapi/linux/vfio.h
index 8ce36c1..ef33ea0 100644
--- a/original/uapi/linux/vfio.h
+++ b/original/uapi/linux/vfio.h
@@ -335,6 +335,8 @@
/* 10de vendor PCI sub-types */
/*
* NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space.
+ *
+ * Deprecated, region no longer provided
*/
#define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM (1)
@@ -342,6 +344,8 @@
/*
* IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU
* to do TLB invalidation on a GPU.
+ *
+ * Deprecated, region no longer provided
*/
#define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD (1)
@@ -641,6 +645,8 @@
* Capability with compressed real address (aka SSA - small system address)
* where GPU RAM is mapped on a system bus. Used by a GPU for DMA routing
* and by the userspace to associate a NVLink bridge with a GPU.
+ *
+ * Deprecated, capability no longer provided
*/
#define VFIO_REGION_INFO_CAP_NVLINK2_SSATGT 4
@@ -655,6 +661,8 @@
* property in the device tree. The value is fixed in the hardware
* and failing to provide the correct value results in the link
* not working with no indication from the driver why.
+ *
+ * Deprecated, capability no longer provided
*/
#define VFIO_REGION_INFO_CAP_NVLINK2_LNKSPD 5
diff --git a/original/uapi/linux/videodev2.h b/original/uapi/linux/videodev2.h
index 3e44b6c..df8b9c4 100644
--- a/original/uapi/linux/videodev2.h
+++ b/original/uapi/linux/videodev2.h
@@ -70,7 +70,7 @@
* Common stuff for both V4L1 and V4L2
* Moved from videodev.h
*/
-#define VIDEO_MAX_FRAME 64
+#define VIDEO_MAX_FRAME 32
#define VIDEO_MAX_PLANES 8
/*
@@ -586,6 +586,7 @@
#define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */
#define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */
#define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */
+#define V4L2_PIX_FMT_YUV24 v4l2_fourcc('Y', 'U', 'V', '3') /* 24 YUV-8-8-8 */
#define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */
#define V4L2_PIX_FMT_AYUV32 v4l2_fourcc('A', 'Y', 'U', 'V') /* 32 AYUV-8-8-8-8 */
#define V4L2_PIX_FMT_XYUV32 v4l2_fourcc('X', 'Y', 'U', 'V') /* 32 XYUV-8-8-8-8 */
@@ -600,15 +601,12 @@
#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
#define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
#define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */
-#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */
/* two non contiguous planes - one Y, one Cr + Cb interleaved */
#define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */
#define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */
#define V4L2_PIX_FMT_NV16M v4l2_fourcc('N', 'M', '1', '6') /* 16 Y/CbCr 4:2:2 */
#define V4L2_PIX_FMT_NV61M v4l2_fourcc('N', 'M', '6', '1') /* 16 Y/CrCb 4:2:2 */
-#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */
-#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */
/* three planes - Y Cb, Cr */
#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */
@@ -626,6 +624,15 @@
#define V4L2_PIX_FMT_YUV444M v4l2_fourcc('Y', 'M', '2', '4') /* 24 YUV444 planar */
#define V4L2_PIX_FMT_YVU444M v4l2_fourcc('Y', 'M', '4', '2') /* 24 YVU444 planar */
+/* Tiled YUV formats */
+#define V4L2_PIX_FMT_NV12_4L4 v4l2_fourcc('V', 'T', '1', '2') /* 12 Y/CbCr 4:2:0 4x4 tiles */
+#define V4L2_PIX_FMT_NV12_16L16 v4l2_fourcc('H', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 tiles */
+#define V4L2_PIX_FMT_NV12_32L32 v4l2_fourcc('S', 'T', '1', '2') /* 12 Y/CbCr 4:2:0 32x32 tiles */
+
+/* Tiled YUV formats, non contiguous planes */
+#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 tiles */
+#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 tiles */
+
/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */
#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */
@@ -694,7 +701,9 @@
#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
#define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
+#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') /* VP8 parsed frame */
#define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */
+#define V4L2_PIX_FMT_VP9_FRAME v4l2_fourcc('V', 'P', '9', 'F') /* VP9 parsed frame */
#define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */
#define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */
#define V4L2_PIX_FMT_FWHT_STATELESS v4l2_fourcc('S', 'F', 'W', 'H') /* Stateless FWHT (vicodec) */
@@ -731,8 +740,8 @@
#define V4L2_PIX_FMT_Y12I v4l2_fourcc('Y', '1', '2', 'I') /* Greyscale 12-bit L/R interleaved */
#define V4L2_PIX_FMT_Z16 v4l2_fourcc('Z', '1', '6', ' ') /* Depth data 16-bit */
#define V4L2_PIX_FMT_MT21C v4l2_fourcc('M', 'T', '2', '1') /* Mediatek compressed block mode */
+#define V4L2_PIX_FMT_MM21 v4l2_fourcc('M', 'M', '2', '1') /* Mediatek 8-bit block mode, two non-contiguous planes */
#define V4L2_PIX_FMT_INZI v4l2_fourcc('I', 'N', 'Z', 'I') /* Intel Planar Greyscale 10-bit and Depth 16-bit */
-#define V4L2_PIX_FMT_SUNXI_TILED_NV12 v4l2_fourcc('S', 'T', '1', '2') /* Sunxi Tiled NV12 Format */
#define V4L2_PIX_FMT_CNF4 v4l2_fourcc('C', 'N', 'F', '4') /* Intel 4-bit packed depth confidence information */
#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* BTTV 8-bit dithered RGB */
@@ -951,9 +960,12 @@
__u32 type; /* enum v4l2_buf_type */
__u32 memory; /* enum v4l2_memory */
__u32 capabilities;
- __u32 reserved[1];
+ __u8 flags;
+ __u8 reserved[3];
};
+#define V4L2_MEMORY_FLAG_NON_COHERENT (1 << 0)
+
/* capabilities for struct v4l2_requestbuffers and v4l2_create_buffers */
#define V4L2_BUF_CAP_SUPPORTS_MMAP (1 << 0)
#define V4L2_BUF_CAP_SUPPORTS_USERPTR (1 << 1)
@@ -975,8 +987,10 @@
* pointing to this plane
* @fd: when memory is V4L2_MEMORY_DMABUF, a userspace file
* descriptor associated with this plane
+ * @m: union of @mem_offset, @userptr and @fd
* @data_offset: offset in the plane to the start of data; usually 0,
* unless there is a header in front of the data
+ * @reserved: drivers and applications must zero this array
*
* Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
* with two planes can have one plane for Y, and another for interleaved CbCr
@@ -1018,10 +1032,14 @@
* a userspace file descriptor associated with this buffer
* @planes: for multiplanar buffers; userspace pointer to the array of plane
* info structs for this buffer
+ * @m: union of @offset, @userptr, @planes and @fd
* @length: size in bytes of the buffer (NOT its payload) for single-plane
* buffers (when type != *_MPLANE); number of elements in the
* planes array for multi-plane buffers
+ * @reserved2: drivers and applications must zero this field
* @request_fd: fd of the request that this buffer should use
+ * @reserved: for backwards compatibility with applications that do not know
+ * about @request_fd
*
* Contains data exchanged by application and driver using one of the Streaming
* I/O methods.
@@ -1059,7 +1077,7 @@
#ifndef __KERNEL__
/**
* v4l2_timeval_to_ns - Convert timeval to nanoseconds
- * @ts: pointer to the timeval variable to be converted
+ * @tv: pointer to the timeval variable to be converted
*
* Returns the scalar nanosecond representation of the timeval
* parameter.
@@ -1120,6 +1138,7 @@
* @flags: flags for newly created file, currently only O_CLOEXEC is
* supported, refer to manual of open syscall for more details
* @fd: file descriptor associated with DMABUF (set by driver)
+ * @reserved: drivers and applications must zero this array
*
* Contains data used for exporting a video buffer as DMABUF file descriptor.
* The buffer is identified by a 'cookie' returned by VIDIOC_QUERYBUF
@@ -1737,6 +1756,12 @@
struct v4l2_ctrl_h264_slice_params __user *p_h264_slice_params;
struct v4l2_ctrl_h264_decode_params __user *p_h264_decode_params;
struct v4l2_ctrl_fwht_params __user *p_fwht_params;
+ struct v4l2_ctrl_vp8_frame __user *p_vp8_frame;
+ struct v4l2_ctrl_mpeg2_sequence __user *p_mpeg2_sequence;
+ struct v4l2_ctrl_mpeg2_picture __user *p_mpeg2_picture;
+ struct v4l2_ctrl_mpeg2_quantisation __user *p_mpeg2_quantisation;
+ struct v4l2_ctrl_vp9_compressed_hdr __user *p_vp9_compressed_hdr_probs;
+ struct v4l2_ctrl_vp9_frame __user *p_vp9_frame;
void __user *ptr;
};
} __attribute__ ((packed));
@@ -1784,6 +1809,9 @@
V4L2_CTRL_TYPE_U32 = 0x0102,
V4L2_CTRL_TYPE_AREA = 0x0106,
+ V4L2_CTRL_TYPE_HDR10_CLL_INFO = 0x0110,
+ V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY = 0x0111,
+
V4L2_CTRL_TYPE_H264_SPS = 0x0200,
V4L2_CTRL_TYPE_H264_PPS = 0x0201,
V4L2_CTRL_TYPE_H264_SCALING_MATRIX = 0x0202,
@@ -1792,6 +1820,15 @@
V4L2_CTRL_TYPE_H264_PRED_WEIGHTS = 0x0205,
V4L2_CTRL_TYPE_FWHT_PARAMS = 0x0220,
+
+ V4L2_CTRL_TYPE_VP8_FRAME = 0x0240,
+
+ V4L2_CTRL_TYPE_MPEG2_QUANTISATION = 0x0250,
+ V4L2_CTRL_TYPE_MPEG2_SEQUENCE = 0x0251,
+ V4L2_CTRL_TYPE_MPEG2_PICTURE = 0x0252,
+
+ V4L2_CTRL_TYPE_VP9_COMPRESSED_HDR = 0x0260,
+ V4L2_CTRL_TYPE_VP9_FRAME = 0x0261,
};
/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
@@ -2229,6 +2266,7 @@
* this plane will be used
* @bytesperline: distance in bytes between the leftmost pixels in two
* adjacent lines
+ * @reserved: drivers and applications must zero this array
*/
struct v4l2_plane_pix_format {
__u32 sizeimage;
@@ -2247,8 +2285,10 @@
* @num_planes: number of planes for this format
* @flags: format flags (V4L2_PIX_FMT_FLAG_*)
* @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
+ * @hsv_enc: enum v4l2_hsv_encoding, HSV encoding
* @quantization: enum v4l2_quantization, colorspace quantization
* @xfer_func: enum v4l2_xfer_func, colorspace transfer function
+ * @reserved: drivers and applications must zero this array
*/
struct v4l2_pix_format_mplane {
__u32 width;
@@ -2273,6 +2313,7 @@
* struct v4l2_sdr_format - SDR format definition
* @pixelformat: little endian four character code (fourcc)
* @buffersize: maximum size in bytes required for data
+ * @reserved: drivers and applications must zero this array
*/
struct v4l2_sdr_format {
__u32 pixelformat;
@@ -2299,6 +2340,8 @@
* @vbi: raw VBI capture or output parameters
* @sliced: sliced VBI capture or output parameters
* @raw_data: placeholder for future extensions and custom formats
+ * @fmt: union of @pix, @pix_mp, @win, @vbi, @sliced, @sdr, @meta
+ * and @raw_data
*/
struct v4l2_format {
__u32 type;
@@ -2471,6 +2514,9 @@
* @memory: enum v4l2_memory; buffer memory type
* @format: frame format, for which buffers are requested
* @capabilities: capabilities of this buffer type.
+ * @flags: additional buffer management attributes (ignored unless the
+ * queue has V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS capability
+ * and configured for MMAP streaming I/O).
* @reserved: future extensions
*/
struct v4l2_create_buffers {
@@ -2479,7 +2525,8 @@
__u32 memory;
struct v4l2_format format;
__u32 capabilities;
- __u32 reserved[7];
+ __u32 flags;
+ __u32 reserved[6];
};
/*
@@ -2587,4 +2634,10 @@
#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */
+/* Deprecated definitions kept for backwards compatibility */
+#ifndef __KERNEL__
+#define V4L2_PIX_FMT_HM12 V4L2_PIX_FMT_NV12_16L16
+#define V4L2_PIX_FMT_SUNXI_TILED_NV12 V4L2_PIX_FMT_NV12_32L32
+#endif
+
#endif /* _UAPI__LINUX_VIDEODEV2_H */
diff --git a/original/uapi/linux/virtio_bt.h b/original/uapi/linux/virtio_bt.h
new file mode 100644
index 0000000..a7bd48d
--- /dev/null
+++ b/original/uapi/linux/virtio_bt.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+
+#ifndef _UAPI_LINUX_VIRTIO_BT_H
+#define _UAPI_LINUX_VIRTIO_BT_H
+
+#include <linux/virtio_types.h>
+
+/* Feature bits */
+#define VIRTIO_BT_F_VND_HCI 0 /* Indicates vendor command support */
+#define VIRTIO_BT_F_MSFT_EXT 1 /* Indicates MSFT vendor support */
+#define VIRTIO_BT_F_AOSP_EXT 2 /* Indicates AOSP vendor support */
+
+enum virtio_bt_config_type {
+ VIRTIO_BT_CONFIG_TYPE_PRIMARY = 0,
+ VIRTIO_BT_CONFIG_TYPE_AMP = 1,
+};
+
+enum virtio_bt_config_vendor {
+ VIRTIO_BT_CONFIG_VENDOR_NONE = 0,
+ VIRTIO_BT_CONFIG_VENDOR_ZEPHYR = 1,
+ VIRTIO_BT_CONFIG_VENDOR_INTEL = 2,
+ VIRTIO_BT_CONFIG_VENDOR_REALTEK = 3,
+};
+
+struct virtio_bt_config {
+ __u8 type;
+ __u16 vendor;
+ __u16 msft_opcode;
+} __attribute__((packed));
+
+#endif /* _UAPI_LINUX_VIRTIO_BT_H */
diff --git a/original/uapi/linux/virtio_gpio.h b/original/uapi/linux/virtio_gpio.h
new file mode 100644
index 0000000..d4b29d9
--- /dev/null
+++ b/original/uapi/linux/virtio_gpio.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#ifndef _LINUX_VIRTIO_GPIO_H
+#define _LINUX_VIRTIO_GPIO_H
+
+#include <linux/types.h>
+
+/* Virtio GPIO Feature bits */
+#define VIRTIO_GPIO_F_IRQ 0
+
+/* Virtio GPIO request types */
+#define VIRTIO_GPIO_MSG_GET_NAMES 0x0001
+#define VIRTIO_GPIO_MSG_GET_DIRECTION 0x0002
+#define VIRTIO_GPIO_MSG_SET_DIRECTION 0x0003
+#define VIRTIO_GPIO_MSG_GET_VALUE 0x0004
+#define VIRTIO_GPIO_MSG_SET_VALUE 0x0005
+#define VIRTIO_GPIO_MSG_IRQ_TYPE 0x0006
+
+/* Possible values of the status field */
+#define VIRTIO_GPIO_STATUS_OK 0x0
+#define VIRTIO_GPIO_STATUS_ERR 0x1
+
+/* Direction types */
+#define VIRTIO_GPIO_DIRECTION_NONE 0x00
+#define VIRTIO_GPIO_DIRECTION_OUT 0x01
+#define VIRTIO_GPIO_DIRECTION_IN 0x02
+
+/* Virtio GPIO IRQ types */
+#define VIRTIO_GPIO_IRQ_TYPE_NONE 0x00
+#define VIRTIO_GPIO_IRQ_TYPE_EDGE_RISING 0x01
+#define VIRTIO_GPIO_IRQ_TYPE_EDGE_FALLING 0x02
+#define VIRTIO_GPIO_IRQ_TYPE_EDGE_BOTH 0x03
+#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_HIGH 0x04
+#define VIRTIO_GPIO_IRQ_TYPE_LEVEL_LOW 0x08
+
+struct virtio_gpio_config {
+ __le16 ngpio;
+ __u8 padding[2];
+ __le32 gpio_names_size;
+};
+
+/* Virtio GPIO Request / Response */
+struct virtio_gpio_request {
+ __le16 type;
+ __le16 gpio;
+ __le32 value;
+};
+
+struct virtio_gpio_response {
+ __u8 status;
+ __u8 value;
+};
+
+struct virtio_gpio_response_get_names {
+ __u8 status;
+ __u8 value[];
+};
+
+/* Virtio GPIO IRQ Request / Response */
+struct virtio_gpio_irq_request {
+ __le16 gpio;
+};
+
+struct virtio_gpio_irq_response {
+ __u8 status;
+};
+
+/* Possible values of the interrupt status field */
+#define VIRTIO_GPIO_IRQ_STATUS_INVALID 0x0
+#define VIRTIO_GPIO_IRQ_STATUS_VALID 0x1
+
+#endif /* _LINUX_VIRTIO_GPIO_H */
diff --git a/original/uapi/linux/virtio_gpu.h b/original/uapi/linux/virtio_gpu.h
index 97523a9..f556fde 100644
--- a/original/uapi/linux/virtio_gpu.h
+++ b/original/uapi/linux/virtio_gpu.h
@@ -59,6 +59,11 @@
* VIRTIO_GPU_CMD_RESOURCE_CREATE_BLOB
*/
#define VIRTIO_GPU_F_RESOURCE_BLOB 3
+/*
+ * VIRTIO_GPU_CMD_CREATE_CONTEXT with
+ * context_init and multiple timelines
+ */
+#define VIRTIO_GPU_F_CONTEXT_INIT 4
enum virtio_gpu_ctrl_type {
VIRTIO_GPU_UNDEFINED = 0,
@@ -122,14 +127,20 @@
VIRTIO_GPU_SHM_ID_HOST_VISIBLE = 1
};
-#define VIRTIO_GPU_FLAG_FENCE (1 << 0)
+#define VIRTIO_GPU_FLAG_FENCE (1 << 0)
+/*
+ * If the following flag is set, then ring_idx contains the index
+ * of the command ring that needs to used when creating the fence
+ */
+#define VIRTIO_GPU_FLAG_INFO_RING_IDX (1 << 1)
struct virtio_gpu_ctrl_hdr {
__le32 type;
__le32 flags;
__le64 fence_id;
__le32 ctx_id;
- __le32 padding;
+ __u8 ring_idx;
+ __u8 padding[3];
};
/* data passed in the cursor vq */
@@ -269,10 +280,11 @@
};
/* VIRTIO_GPU_CMD_CTX_CREATE */
+#define VIRTIO_GPU_CONTEXT_INIT_CAPSET_ID_MASK 0x000000ff
struct virtio_gpu_ctx_create {
struct virtio_gpu_ctrl_hdr hdr;
__le32 nlen;
- __le32 padding;
+ __le32 context_init;
char debug_name[64];
};
diff --git a/original/uapi/linux/virtio_i2c.h b/original/uapi/linux/virtio_i2c.h
new file mode 100644
index 0000000..acf3b60
--- /dev/null
+++ b/original/uapi/linux/virtio_i2c.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */
+/*
+ * Definitions for virtio I2C Adpter
+ *
+ * Copyright (c) 2021 Intel Corporation. All rights reserved.
+ */
+
+#ifndef _UAPI_LINUX_VIRTIO_I2C_H
+#define _UAPI_LINUX_VIRTIO_I2C_H
+
+#include <linux/const.h>
+#include <linux/types.h>
+
+/* Virtio I2C Feature bits */
+#define VIRTIO_I2C_F_ZERO_LENGTH_REQUEST 0
+
+/* The bit 0 of the @virtio_i2c_out_hdr.@flags, used to group the requests */
+#define VIRTIO_I2C_FLAGS_FAIL_NEXT _BITUL(0)
+
+/* The bit 1 of the @virtio_i2c_out_hdr.@flags, used to mark a buffer as read */
+#define VIRTIO_I2C_FLAGS_M_RD _BITUL(1)
+
+/**
+ * struct virtio_i2c_out_hdr - the virtio I2C message OUT header
+ * @addr: the controlled device address
+ * @padding: used to pad to full dword
+ * @flags: used for feature extensibility
+ */
+struct virtio_i2c_out_hdr {
+ __le16 addr;
+ __le16 padding;
+ __le32 flags;
+};
+
+/**
+ * struct virtio_i2c_in_hdr - the virtio I2C message IN header
+ * @status: the processing result from the backend
+ */
+struct virtio_i2c_in_hdr {
+ __u8 status;
+};
+
+/* The final status written by the device */
+#define VIRTIO_I2C_MSG_OK 0
+#define VIRTIO_I2C_MSG_ERR 1
+
+#endif /* _UAPI_LINUX_VIRTIO_I2C_H */
diff --git a/original/uapi/linux/virtio_ids.h b/original/uapi/linux/virtio_ids.h
index bc1c062..80d76b7 100644
--- a/original/uapi/linux/virtio_ids.h
+++ b/original/uapi/linux/virtio_ids.h
@@ -51,8 +51,34 @@
#define VIRTIO_ID_PSTORE 22 /* virtio pstore device */
#define VIRTIO_ID_IOMMU 23 /* virtio IOMMU */
#define VIRTIO_ID_MEM 24 /* virtio mem */
+#define VIRTIO_ID_SOUND 25 /* virtio sound */
#define VIRTIO_ID_FS 26 /* virtio filesystem */
#define VIRTIO_ID_PMEM 27 /* virtio pmem */
+#define VIRTIO_ID_RPMB 28 /* virtio rpmb */
#define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */
+#define VIRTIO_ID_VIDEO_ENCODER 30 /* virtio video encoder */
+#define VIRTIO_ID_VIDEO_DECODER 31 /* virtio video decoder */
+#define VIRTIO_ID_SCMI 32 /* virtio SCMI */
+#define VIRTIO_ID_NITRO_SEC_MOD 33 /* virtio nitro secure module*/
+#define VIRTIO_ID_I2C_ADAPTER 34 /* virtio i2c adapter */
+#define VIRTIO_ID_WATCHDOG 35 /* virtio watchdog */
+#define VIRTIO_ID_CAN 36 /* virtio can */
+#define VIRTIO_ID_DMABUF 37 /* virtio dmabuf */
+#define VIRTIO_ID_PARAM_SERV 38 /* virtio parameter server */
+#define VIRTIO_ID_AUDIO_POLICY 39 /* virtio audio policy */
+#define VIRTIO_ID_BT 40 /* virtio bluetooth */
+#define VIRTIO_ID_GPIO 41 /* virtio gpio */
+
+/*
+ * Virtio Transitional IDs
+ */
+
+#define VIRTIO_TRANS_ID_NET 1000 /* transitional virtio net */
+#define VIRTIO_TRANS_ID_BLOCK 1001 /* transitional virtio block */
+#define VIRTIO_TRANS_ID_BALLOON 1002 /* transitional virtio balloon */
+#define VIRTIO_TRANS_ID_CONSOLE 1003 /* transitional virtio console */
+#define VIRTIO_TRANS_ID_SCSI 1004 /* transitional virtio SCSI */
+#define VIRTIO_TRANS_ID_RNG 1005 /* transitional virtio rng */
+#define VIRTIO_TRANS_ID_9P 1009 /* transitional virtio 9p console */
#endif /* _LINUX_VIRTIO_IDS_H */
diff --git a/original/uapi/linux/virtio_iommu.h b/original/uapi/linux/virtio_iommu.h
index 237e36a..1ff357f 100644
--- a/original/uapi/linux/virtio_iommu.h
+++ b/original/uapi/linux/virtio_iommu.h
@@ -16,6 +16,7 @@
#define VIRTIO_IOMMU_F_BYPASS 3
#define VIRTIO_IOMMU_F_PROBE 4
#define VIRTIO_IOMMU_F_MMIO 5
+#define VIRTIO_IOMMU_F_BYPASS_CONFIG 6
struct virtio_iommu_range_64 {
__le64 start;
@@ -36,6 +37,8 @@
struct virtio_iommu_range_32 domain_range;
/* Probe buffer size */
__le32 probe_size;
+ __u8 bypass;
+ __u8 reserved[3];
};
/* Request types */
@@ -66,11 +69,14 @@
__u8 reserved[3];
};
+#define VIRTIO_IOMMU_ATTACH_F_BYPASS (1 << 0)
+
struct virtio_iommu_req_attach {
struct virtio_iommu_req_head head;
__le32 domain;
__le32 endpoint;
- __u8 reserved[8];
+ __le32 flags;
+ __u8 reserved[4];
struct virtio_iommu_req_tail tail;
};
diff --git a/original/uapi/linux/virtio_mem.h b/original/uapi/linux/virtio_mem.h
index 70e01c6..e9122f1 100644
--- a/original/uapi/linux/virtio_mem.h
+++ b/original/uapi/linux/virtio_mem.h
@@ -68,9 +68,10 @@
* explicitly triggered (VIRTIO_MEM_REQ_UNPLUG).
*
* There are no guarantees what will happen if unplugged memory is
- * read/written. Such memory should, in general, not be touched. E.g.,
- * even writing might succeed, but the values will simply be discarded at
- * random points in time.
+ * read/written. In general, unplugged memory should not be touched, because
+ * the resulting action is undefined. There is one exception: without
+ * VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, unplugged memory inside the usable
+ * region can be read, to simplify creation of memory dumps.
*
* It can happen that the device cannot process a request, because it is
* busy. The device driver has to retry later.
@@ -87,6 +88,8 @@
/* node_id is an ACPI PXM and is valid */
#define VIRTIO_MEM_F_ACPI_PXM 0
+/* unplugged memory must not be accessed */
+#define VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE 1
/* --- virtio-mem: guest -> host requests --- */
diff --git a/original/uapi/linux/virtio_pcidev.h b/original/uapi/linux/virtio_pcidev.h
new file mode 100644
index 0000000..668b07c
--- /dev/null
+++ b/original/uapi/linux/virtio_pcidev.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2021 Intel Corporation
+ * Author: Johannes Berg <johannes@sipsolutions.net>
+ */
+#ifndef _UAPI_LINUX_VIRTIO_PCIDEV_H
+#define _UAPI_LINUX_VIRTIO_PCIDEV_H
+#include <linux/types.h>
+
+/**
+ * enum virtio_pcidev_ops - virtual PCI device operations
+ * @VIRTIO_PCIDEV_OP_RESERVED: reserved to catch errors
+ * @VIRTIO_PCIDEV_OP_CFG_READ: read config space, size is 1, 2, 4 or 8;
+ * the @data field should be filled in by the device (in little endian).
+ * @VIRTIO_PCIDEV_OP_CFG_WRITE: write config space, size is 1, 2, 4 or 8;
+ * the @data field contains the data to write (in little endian).
+ * @VIRTIO_PCIDEV_OP_MMIO_READ: read BAR mem/pio, size can be variable;
+ * the @data field should be filled in by the device (in little endian).
+ * @VIRTIO_PCIDEV_OP_MMIO_WRITE: write BAR mem/pio, size can be variable;
+ * the @data field contains the data to write (in little endian).
+ * @VIRTIO_PCIDEV_OP_MMIO_MEMSET: memset MMIO, size is variable but
+ * the @data field only has one byte (unlike @VIRTIO_PCIDEV_OP_MMIO_WRITE)
+ * @VIRTIO_PCIDEV_OP_INT: legacy INTx# pin interrupt, the addr field is 1-4 for
+ * the number
+ * @VIRTIO_PCIDEV_OP_MSI: MSI(-X) interrupt, this message basically transports
+ * the 16- or 32-bit write that would otherwise be done into memory,
+ * analogous to the write messages (@VIRTIO_PCIDEV_OP_MMIO_WRITE) above
+ * @VIRTIO_PCIDEV_OP_PME: Dummy message whose content is ignored (and should be
+ * all zeroes) to signal the PME# pin.
+ */
+enum virtio_pcidev_ops {
+ VIRTIO_PCIDEV_OP_RESERVED = 0,
+ VIRTIO_PCIDEV_OP_CFG_READ,
+ VIRTIO_PCIDEV_OP_CFG_WRITE,
+ VIRTIO_PCIDEV_OP_MMIO_READ,
+ VIRTIO_PCIDEV_OP_MMIO_WRITE,
+ VIRTIO_PCIDEV_OP_MMIO_MEMSET,
+ VIRTIO_PCIDEV_OP_INT,
+ VIRTIO_PCIDEV_OP_MSI,
+ VIRTIO_PCIDEV_OP_PME,
+};
+
+/**
+ * struct virtio_pcidev_msg - virtio PCI device operation
+ * @op: the operation to do
+ * @bar: the bar (only with BAR read/write messages)
+ * @reserved: reserved
+ * @size: the size of the read/write (in bytes)
+ * @addr: the address to read/write
+ * @data: the data, normally @size long, but just one byte for
+ * %VIRTIO_PCIDEV_OP_MMIO_MEMSET
+ *
+ * Note: the fields are all in native (CPU) endian, however, the
+ * @data values will often be in little endian (see the ops above.)
+ */
+struct virtio_pcidev_msg {
+ __u8 op;
+ __u8 bar;
+ __u16 reserved;
+ __u32 size;
+ __u64 addr;
+ __u8 data[];
+};
+
+#endif /* _UAPI_LINUX_VIRTIO_PCIDEV_H */
diff --git a/original/uapi/linux/virtio_scmi.h b/original/uapi/linux/virtio_scmi.h
new file mode 100644
index 0000000..f8ddd04
--- /dev/null
+++ b/original/uapi/linux/virtio_scmi.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020-2021 OpenSynergy GmbH
+ * Copyright (C) 2021 ARM Ltd.
+ */
+
+#ifndef _UAPI_LINUX_VIRTIO_SCMI_H
+#define _UAPI_LINUX_VIRTIO_SCMI_H
+
+#include <linux/virtio_types.h>
+
+/* Device implements some SCMI notifications, or delayed responses. */
+#define VIRTIO_SCMI_F_P2A_CHANNELS 0
+
+/* Device implements any SCMI statistics shared memory region */
+#define VIRTIO_SCMI_F_SHARED_MEMORY 1
+
+/* Virtqueues */
+
+#define VIRTIO_SCMI_VQ_TX 0 /* cmdq */
+#define VIRTIO_SCMI_VQ_RX 1 /* eventq */
+#define VIRTIO_SCMI_VQ_MAX_CNT 2
+
+#endif /* _UAPI_LINUX_VIRTIO_SCMI_H */
diff --git a/original/uapi/linux/virtio_snd.h b/original/uapi/linux/virtio_snd.h
new file mode 100644
index 0000000..dfe4954
--- /dev/null
+++ b/original/uapi/linux/virtio_snd.h
@@ -0,0 +1,334 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Copyright (C) 2021 OpenSynergy GmbH
+ */
+#ifndef VIRTIO_SND_IF_H
+#define VIRTIO_SND_IF_H
+
+#include <linux/virtio_types.h>
+
+/*******************************************************************************
+ * CONFIGURATION SPACE
+ */
+struct virtio_snd_config {
+ /* # of available physical jacks */
+ __le32 jacks;
+ /* # of available PCM streams */
+ __le32 streams;
+ /* # of available channel maps */
+ __le32 chmaps;
+};
+
+enum {
+ /* device virtqueue indexes */
+ VIRTIO_SND_VQ_CONTROL = 0,
+ VIRTIO_SND_VQ_EVENT,
+ VIRTIO_SND_VQ_TX,
+ VIRTIO_SND_VQ_RX,
+ /* # of device virtqueues */
+ VIRTIO_SND_VQ_MAX
+};
+
+/*******************************************************************************
+ * COMMON DEFINITIONS
+ */
+
+/* supported dataflow directions */
+enum {
+ VIRTIO_SND_D_OUTPUT = 0,
+ VIRTIO_SND_D_INPUT
+};
+
+enum {
+ /* jack control request types */
+ VIRTIO_SND_R_JACK_INFO = 1,
+ VIRTIO_SND_R_JACK_REMAP,
+
+ /* PCM control request types */
+ VIRTIO_SND_R_PCM_INFO = 0x0100,
+ VIRTIO_SND_R_PCM_SET_PARAMS,
+ VIRTIO_SND_R_PCM_PREPARE,
+ VIRTIO_SND_R_PCM_RELEASE,
+ VIRTIO_SND_R_PCM_START,
+ VIRTIO_SND_R_PCM_STOP,
+
+ /* channel map control request types */
+ VIRTIO_SND_R_CHMAP_INFO = 0x0200,
+
+ /* jack event types */
+ VIRTIO_SND_EVT_JACK_CONNECTED = 0x1000,
+ VIRTIO_SND_EVT_JACK_DISCONNECTED,
+
+ /* PCM event types */
+ VIRTIO_SND_EVT_PCM_PERIOD_ELAPSED = 0x1100,
+ VIRTIO_SND_EVT_PCM_XRUN,
+
+ /* common status codes */
+ VIRTIO_SND_S_OK = 0x8000,
+ VIRTIO_SND_S_BAD_MSG,
+ VIRTIO_SND_S_NOT_SUPP,
+ VIRTIO_SND_S_IO_ERR
+};
+
+/* common header */
+struct virtio_snd_hdr {
+ __le32 code;
+};
+
+/* event notification */
+struct virtio_snd_event {
+ /* VIRTIO_SND_EVT_XXX */
+ struct virtio_snd_hdr hdr;
+ /* optional event data */
+ __le32 data;
+};
+
+/* common control request to query an item information */
+struct virtio_snd_query_info {
+ /* VIRTIO_SND_R_XXX_INFO */
+ struct virtio_snd_hdr hdr;
+ /* item start identifier */
+ __le32 start_id;
+ /* item count to query */
+ __le32 count;
+ /* item information size in bytes */
+ __le32 size;
+};
+
+/* common item information header */
+struct virtio_snd_info {
+ /* function group node id (High Definition Audio Specification 7.1.2) */
+ __le32 hda_fn_nid;
+};
+
+/*******************************************************************************
+ * JACK CONTROL MESSAGES
+ */
+struct virtio_snd_jack_hdr {
+ /* VIRTIO_SND_R_JACK_XXX */
+ struct virtio_snd_hdr hdr;
+ /* 0 ... virtio_snd_config::jacks - 1 */
+ __le32 jack_id;
+};
+
+/* supported jack features */
+enum {
+ VIRTIO_SND_JACK_F_REMAP = 0
+};
+
+struct virtio_snd_jack_info {
+ /* common header */
+ struct virtio_snd_info hdr;
+ /* supported feature bit map (1 << VIRTIO_SND_JACK_F_XXX) */
+ __le32 features;
+ /* pin configuration (High Definition Audio Specification 7.3.3.31) */
+ __le32 hda_reg_defconf;
+ /* pin capabilities (High Definition Audio Specification 7.3.4.9) */
+ __le32 hda_reg_caps;
+ /* current jack connection status (0: disconnected, 1: connected) */
+ __u8 connected;
+
+ __u8 padding[7];
+};
+
+/* jack remapping control request */
+struct virtio_snd_jack_remap {
+ /* .code = VIRTIO_SND_R_JACK_REMAP */
+ struct virtio_snd_jack_hdr hdr;
+ /* selected association number */
+ __le32 association;
+ /* selected sequence number */
+ __le32 sequence;
+};
+
+/*******************************************************************************
+ * PCM CONTROL MESSAGES
+ */
+struct virtio_snd_pcm_hdr {
+ /* VIRTIO_SND_R_PCM_XXX */
+ struct virtio_snd_hdr hdr;
+ /* 0 ... virtio_snd_config::streams - 1 */
+ __le32 stream_id;
+};
+
+/* supported PCM stream features */
+enum {
+ VIRTIO_SND_PCM_F_SHMEM_HOST = 0,
+ VIRTIO_SND_PCM_F_SHMEM_GUEST,
+ VIRTIO_SND_PCM_F_MSG_POLLING,
+ VIRTIO_SND_PCM_F_EVT_SHMEM_PERIODS,
+ VIRTIO_SND_PCM_F_EVT_XRUNS
+};
+
+/* supported PCM sample formats */
+enum {
+ /* analog formats (width / physical width) */
+ VIRTIO_SND_PCM_FMT_IMA_ADPCM = 0, /* 4 / 4 bits */
+ VIRTIO_SND_PCM_FMT_MU_LAW, /* 8 / 8 bits */
+ VIRTIO_SND_PCM_FMT_A_LAW, /* 8 / 8 bits */
+ VIRTIO_SND_PCM_FMT_S8, /* 8 / 8 bits */
+ VIRTIO_SND_PCM_FMT_U8, /* 8 / 8 bits */
+ VIRTIO_SND_PCM_FMT_S16, /* 16 / 16 bits */
+ VIRTIO_SND_PCM_FMT_U16, /* 16 / 16 bits */
+ VIRTIO_SND_PCM_FMT_S18_3, /* 18 / 24 bits */
+ VIRTIO_SND_PCM_FMT_U18_3, /* 18 / 24 bits */
+ VIRTIO_SND_PCM_FMT_S20_3, /* 20 / 24 bits */
+ VIRTIO_SND_PCM_FMT_U20_3, /* 20 / 24 bits */
+ VIRTIO_SND_PCM_FMT_S24_3, /* 24 / 24 bits */
+ VIRTIO_SND_PCM_FMT_U24_3, /* 24 / 24 bits */
+ VIRTIO_SND_PCM_FMT_S20, /* 20 / 32 bits */
+ VIRTIO_SND_PCM_FMT_U20, /* 20 / 32 bits */
+ VIRTIO_SND_PCM_FMT_S24, /* 24 / 32 bits */
+ VIRTIO_SND_PCM_FMT_U24, /* 24 / 32 bits */
+ VIRTIO_SND_PCM_FMT_S32, /* 32 / 32 bits */
+ VIRTIO_SND_PCM_FMT_U32, /* 32 / 32 bits */
+ VIRTIO_SND_PCM_FMT_FLOAT, /* 32 / 32 bits */
+ VIRTIO_SND_PCM_FMT_FLOAT64, /* 64 / 64 bits */
+ /* digital formats (width / physical width) */
+ VIRTIO_SND_PCM_FMT_DSD_U8, /* 8 / 8 bits */
+ VIRTIO_SND_PCM_FMT_DSD_U16, /* 16 / 16 bits */
+ VIRTIO_SND_PCM_FMT_DSD_U32, /* 32 / 32 bits */
+ VIRTIO_SND_PCM_FMT_IEC958_SUBFRAME /* 32 / 32 bits */
+};
+
+/* supported PCM frame rates */
+enum {
+ VIRTIO_SND_PCM_RATE_5512 = 0,
+ VIRTIO_SND_PCM_RATE_8000,
+ VIRTIO_SND_PCM_RATE_11025,
+ VIRTIO_SND_PCM_RATE_16000,
+ VIRTIO_SND_PCM_RATE_22050,
+ VIRTIO_SND_PCM_RATE_32000,
+ VIRTIO_SND_PCM_RATE_44100,
+ VIRTIO_SND_PCM_RATE_48000,
+ VIRTIO_SND_PCM_RATE_64000,
+ VIRTIO_SND_PCM_RATE_88200,
+ VIRTIO_SND_PCM_RATE_96000,
+ VIRTIO_SND_PCM_RATE_176400,
+ VIRTIO_SND_PCM_RATE_192000,
+ VIRTIO_SND_PCM_RATE_384000
+};
+
+struct virtio_snd_pcm_info {
+ /* common header */
+ struct virtio_snd_info hdr;
+ /* supported feature bit map (1 << VIRTIO_SND_PCM_F_XXX) */
+ __le32 features;
+ /* supported sample format bit map (1 << VIRTIO_SND_PCM_FMT_XXX) */
+ __le64 formats;
+ /* supported frame rate bit map (1 << VIRTIO_SND_PCM_RATE_XXX) */
+ __le64 rates;
+ /* dataflow direction (VIRTIO_SND_D_XXX) */
+ __u8 direction;
+ /* minimum # of supported channels */
+ __u8 channels_min;
+ /* maximum # of supported channels */
+ __u8 channels_max;
+
+ __u8 padding[5];
+};
+
+/* set PCM stream format */
+struct virtio_snd_pcm_set_params {
+ /* .code = VIRTIO_SND_R_PCM_SET_PARAMS */
+ struct virtio_snd_pcm_hdr hdr;
+ /* size of the hardware buffer */
+ __le32 buffer_bytes;
+ /* size of the hardware period */
+ __le32 period_bytes;
+ /* selected feature bit map (1 << VIRTIO_SND_PCM_F_XXX) */
+ __le32 features;
+ /* selected # of channels */
+ __u8 channels;
+ /* selected sample format (VIRTIO_SND_PCM_FMT_XXX) */
+ __u8 format;
+ /* selected frame rate (VIRTIO_SND_PCM_RATE_XXX) */
+ __u8 rate;
+
+ __u8 padding;
+};
+
+/*******************************************************************************
+ * PCM I/O MESSAGES
+ */
+
+/* I/O request header */
+struct virtio_snd_pcm_xfer {
+ /* 0 ... virtio_snd_config::streams - 1 */
+ __le32 stream_id;
+};
+
+/* I/O request status */
+struct virtio_snd_pcm_status {
+ /* VIRTIO_SND_S_XXX */
+ __le32 status;
+ /* current device latency */
+ __le32 latency_bytes;
+};
+
+/*******************************************************************************
+ * CHANNEL MAP CONTROL MESSAGES
+ */
+struct virtio_snd_chmap_hdr {
+ /* VIRTIO_SND_R_CHMAP_XXX */
+ struct virtio_snd_hdr hdr;
+ /* 0 ... virtio_snd_config::chmaps - 1 */
+ __le32 chmap_id;
+};
+
+/* standard channel position definition */
+enum {
+ VIRTIO_SND_CHMAP_NONE = 0, /* undefined */
+ VIRTIO_SND_CHMAP_NA, /* silent */
+ VIRTIO_SND_CHMAP_MONO, /* mono stream */
+ VIRTIO_SND_CHMAP_FL, /* front left */
+ VIRTIO_SND_CHMAP_FR, /* front right */
+ VIRTIO_SND_CHMAP_RL, /* rear left */
+ VIRTIO_SND_CHMAP_RR, /* rear right */
+ VIRTIO_SND_CHMAP_FC, /* front center */
+ VIRTIO_SND_CHMAP_LFE, /* low frequency (LFE) */
+ VIRTIO_SND_CHMAP_SL, /* side left */
+ VIRTIO_SND_CHMAP_SR, /* side right */
+ VIRTIO_SND_CHMAP_RC, /* rear center */
+ VIRTIO_SND_CHMAP_FLC, /* front left center */
+ VIRTIO_SND_CHMAP_FRC, /* front right center */
+ VIRTIO_SND_CHMAP_RLC, /* rear left center */
+ VIRTIO_SND_CHMAP_RRC, /* rear right center */
+ VIRTIO_SND_CHMAP_FLW, /* front left wide */
+ VIRTIO_SND_CHMAP_FRW, /* front right wide */
+ VIRTIO_SND_CHMAP_FLH, /* front left high */
+ VIRTIO_SND_CHMAP_FCH, /* front center high */
+ VIRTIO_SND_CHMAP_FRH, /* front right high */
+ VIRTIO_SND_CHMAP_TC, /* top center */
+ VIRTIO_SND_CHMAP_TFL, /* top front left */
+ VIRTIO_SND_CHMAP_TFR, /* top front right */
+ VIRTIO_SND_CHMAP_TFC, /* top front center */
+ VIRTIO_SND_CHMAP_TRL, /* top rear left */
+ VIRTIO_SND_CHMAP_TRR, /* top rear right */
+ VIRTIO_SND_CHMAP_TRC, /* top rear center */
+ VIRTIO_SND_CHMAP_TFLC, /* top front left center */
+ VIRTIO_SND_CHMAP_TFRC, /* top front right center */
+ VIRTIO_SND_CHMAP_TSL, /* top side left */
+ VIRTIO_SND_CHMAP_TSR, /* top side right */
+ VIRTIO_SND_CHMAP_LLFE, /* left LFE */
+ VIRTIO_SND_CHMAP_RLFE, /* right LFE */
+ VIRTIO_SND_CHMAP_BC, /* bottom center */
+ VIRTIO_SND_CHMAP_BLC, /* bottom left center */
+ VIRTIO_SND_CHMAP_BRC /* bottom right center */
+};
+
+/* maximum possible number of channels */
+#define VIRTIO_SND_CHMAP_MAX_SIZE 18
+
+struct virtio_snd_chmap_info {
+ /* common header */
+ struct virtio_snd_info hdr;
+ /* dataflow direction (VIRTIO_SND_D_XXX) */
+ __u8 direction;
+ /* # of valid channel position values */
+ __u8 channels;
+ /* channel position values (VIRTIO_SND_CHMAP_XXX) */
+ __u8 positions[VIRTIO_SND_CHMAP_MAX_SIZE];
+};
+
+#endif /* VIRTIO_SND_IF_H */
diff --git a/original/uapi/linux/virtio_vsock.h b/original/uapi/linux/virtio_vsock.h
index 1d57ed3..6473883 100644
--- a/original/uapi/linux/virtio_vsock.h
+++ b/original/uapi/linux/virtio_vsock.h
@@ -38,6 +38,9 @@
#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
+/* The feature bitmap for virtio vsock */
+#define VIRTIO_VSOCK_F_SEQPACKET 1 /* SOCK_SEQPACKET supported */
+
struct virtio_vsock_config {
__le64 guest_cid;
} __attribute__((packed));
@@ -65,6 +68,7 @@
enum virtio_vsock_type {
VIRTIO_VSOCK_TYPE_STREAM = 1,
+ VIRTIO_VSOCK_TYPE_SEQPACKET = 2,
};
enum virtio_vsock_op {
@@ -91,4 +95,10 @@
VIRTIO_VSOCK_SHUTDOWN_SEND = 2,
};
+/* VIRTIO_VSOCK_OP_RW flags values */
+enum virtio_vsock_rw {
+ VIRTIO_VSOCK_SEQ_EOM = 1,
+ VIRTIO_VSOCK_SEQ_EOR = 2,
+};
+
#endif /* _UAPI_LINUX_VIRTIO_VSOCK_H */
diff --git a/original/uapi/linux/vm_sockets.h b/original/uapi/linux/vm_sockets.h
index 46918a1..c60ca33 100644
--- a/original/uapi/linux/vm_sockets.h
+++ b/original/uapi/linux/vm_sockets.h
@@ -64,7 +64,7 @@
* timeout for a STREAM socket.
*/
-#define SO_VM_SOCKETS_CONNECT_TIMEOUT 6
+#define SO_VM_SOCKETS_CONNECT_TIMEOUT_OLD 6
/* Option name for using non-blocking send/receive. Use as the option name
* for setsockopt(3) or getsockopt(3) to set or get the non-blocking
@@ -81,6 +81,17 @@
#define SO_VM_SOCKETS_NONBLOCK_TXRX 7
+#define SO_VM_SOCKETS_CONNECT_TIMEOUT_NEW 8
+
+#if !defined(__KERNEL__)
+#if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__))
+#define SO_VM_SOCKETS_CONNECT_TIMEOUT SO_VM_SOCKETS_CONNECT_TIMEOUT_OLD
+#else
+#define SO_VM_SOCKETS_CONNECT_TIMEOUT \
+ (sizeof(time_t) == sizeof(__kernel_long_t) ? SO_VM_SOCKETS_CONNECT_TIMEOUT_OLD : SO_VM_SOCKETS_CONNECT_TIMEOUT_NEW)
+#endif
+#endif
+
/* The vSocket equivalent of INADDR_ANY. This works for the svm_cid field of
* sockaddr_vm and indicates the context ID of the current endpoint.
*/
diff --git a/original/uapi/linux/wwan.h b/original/uapi/linux/wwan.h
new file mode 100644
index 0000000..32a2720
--- /dev/null
+++ b/original/uapi/linux/wwan.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2021 Intel Corporation.
+ */
+#ifndef _UAPI_WWAN_H_
+#define _UAPI_WWAN_H_
+
+enum {
+ IFLA_WWAN_UNSPEC,
+ IFLA_WWAN_LINK_ID, /* u32 */
+
+ __IFLA_WWAN_MAX
+};
+#define IFLA_WWAN_MAX (__IFLA_WWAN_MAX - 1)
+
+#endif /* _UAPI_WWAN_H_ */
diff --git a/original/uapi/linux/xfrm.h b/original/uapi/linux/xfrm.h
index ffc6a53..65e13a0 100644
--- a/original/uapi/linux/xfrm.h
+++ b/original/uapi/linux/xfrm.h
@@ -215,6 +215,11 @@
XFRM_MSG_MAPPING,
#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING
+
+ XFRM_MSG_SETDEFAULT,
+#define XFRM_MSG_SETDEFAULT XFRM_MSG_SETDEFAULT
+ XFRM_MSG_GETDEFAULT,
+#define XFRM_MSG_GETDEFAULT XFRM_MSG_GETDEFAULT
__XFRM_MSG_MAX
};
#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1)
@@ -308,6 +313,7 @@
XFRMA_SET_MARK, /* __u32 */
XFRMA_SET_MARK_MASK, /* __u32 */
XFRMA_IF_ID, /* __u32 */
+ XFRMA_MTIMER_THRESH, /* __u32 in seconds for input SA */
__XFRMA_MAX
#define XFRMA_OUTPUT_MARK XFRMA_SET_MARK /* Compatibility */
@@ -505,9 +511,24 @@
int ifindex;
__u8 flags;
};
+/* This flag was exposed without any kernel code that supporting it.
+ * Unfortunately, strongswan has the code that uses sets this flag,
+ * which makes impossible to reuse this bit.
+ *
+ * So leave it here to make sure that it won't be reused by mistake.
+ */
#define XFRM_OFFLOAD_IPV6 1
#define XFRM_OFFLOAD_INBOUND 2
+struct xfrm_userpolicy_default {
+#define XFRM_USERPOLICY_UNSPEC 0
+#define XFRM_USERPOLICY_BLOCK 1
+#define XFRM_USERPOLICY_ACCEPT 2
+ __u8 in;
+ __u8 fwd;
+ __u8 out;
+};
+
#ifndef __KERNEL__
/* backwards compatibility for userspace */
#define XFRMGRP_ACQUIRE 1
diff --git a/original/uapi/misc/habanalabs.h b/original/uapi/misc/habanalabs.h
index 5a86b52..371dfc4 100644
--- a/original/uapi/misc/habanalabs.h
+++ b/original/uapi/misc/habanalabs.h
@@ -239,11 +239,64 @@
GAUDI_ENGINE_ID_SIZE
};
+/*
+ * ASIC specific PLL index
+ *
+ * Used to retrieve in frequency info of different IPs via
+ * HL_INFO_PLL_FREQUENCY under HL_IOCTL_INFO IOCTL. The enums need to be
+ * used as an index in struct hl_pll_frequency_info
+ */
+
+enum hl_goya_pll_index {
+ HL_GOYA_CPU_PLL = 0,
+ HL_GOYA_IC_PLL,
+ HL_GOYA_MC_PLL,
+ HL_GOYA_MME_PLL,
+ HL_GOYA_PCI_PLL,
+ HL_GOYA_EMMC_PLL,
+ HL_GOYA_TPC_PLL,
+ HL_GOYA_PLL_MAX
+};
+
+enum hl_gaudi_pll_index {
+ HL_GAUDI_CPU_PLL = 0,
+ HL_GAUDI_PCI_PLL,
+ HL_GAUDI_SRAM_PLL,
+ HL_GAUDI_HBM_PLL,
+ HL_GAUDI_NIC_PLL,
+ HL_GAUDI_DMA_PLL,
+ HL_GAUDI_MESH_PLL,
+ HL_GAUDI_MME_PLL,
+ HL_GAUDI_TPC_PLL,
+ HL_GAUDI_IF_PLL,
+ HL_GAUDI_PLL_MAX
+};
+
+/**
+ * enum hl_device_status - Device status information.
+ * @HL_DEVICE_STATUS_OPERATIONAL: Device is operational.
+ * @HL_DEVICE_STATUS_IN_RESET: Device is currently during reset.
+ * @HL_DEVICE_STATUS_MALFUNCTION: Device is unusable.
+ * @HL_DEVICE_STATUS_NEEDS_RESET: Device needs reset because auto reset was disabled.
+ * @HL_DEVICE_STATUS_IN_DEVICE_CREATION: Device is operational but its creation is still in
+ * progress.
+ * @HL_DEVICE_STATUS_LAST: Last status.
+ */
enum hl_device_status {
HL_DEVICE_STATUS_OPERATIONAL,
HL_DEVICE_STATUS_IN_RESET,
HL_DEVICE_STATUS_MALFUNCTION,
- HL_DEVICE_STATUS_NEEDS_RESET
+ HL_DEVICE_STATUS_NEEDS_RESET,
+ HL_DEVICE_STATUS_IN_DEVICE_CREATION,
+ HL_DEVICE_STATUS_LAST = HL_DEVICE_STATUS_IN_DEVICE_CREATION
+};
+
+enum hl_server_type {
+ HL_SERVER_TYPE_UNKNOWN = 0,
+ HL_SERVER_GAUDI_HLS1 = 1,
+ HL_SERVER_GAUDI_HLS1H = 2,
+ HL_SERVER_GAUDI_TYPE1 = 3,
+ HL_SERVER_GAUDI_TYPE2 = 4
};
/* Opcode for management ioctl
@@ -280,6 +333,18 @@
* HL_INFO_SYNC_MANAGER - Retrieve sync manager info per dcore
* HL_INFO_TOTAL_ENERGY - Retrieve total energy consumption
* HL_INFO_PLL_FREQUENCY - Retrieve PLL frequency
+ * HL_INFO_POWER - Retrieve power information
+ * HL_INFO_OPEN_STATS - Retrieve info regarding recent device open calls
+ * HL_INFO_DRAM_REPLACED_ROWS - Retrieve DRAM replaced rows info
+ * HL_INFO_DRAM_PENDING_ROWS - Retrieve DRAM pending rows num
+ * HL_INFO_LAST_ERR_OPEN_DEV_TIME - Retrieve timestamp of the last time the device was opened
+ * and CS timeout or razwi error occurred.
+ * HL_INFO_CS_TIMEOUT_EVENT - Retrieve CS timeout timestamp and its related CS sequence number.
+ * HL_INFO_RAZWI_EVENT - Retrieve parameters of razwi:
+ * Timestamp of razwi.
+ * The address which accessing it caused the razwi.
+ * Razwi initiator.
+ * Razwi cause, was it a page fault or MMU access error.
*/
#define HL_INFO_HW_IP_INFO 0
#define HL_INFO_HW_EVENTS 1
@@ -297,21 +362,60 @@
#define HL_INFO_SYNC_MANAGER 14
#define HL_INFO_TOTAL_ENERGY 15
#define HL_INFO_PLL_FREQUENCY 16
+#define HL_INFO_POWER 17
+#define HL_INFO_OPEN_STATS 18
+#define HL_INFO_DRAM_REPLACED_ROWS 21
+#define HL_INFO_DRAM_PENDING_ROWS 22
+#define HL_INFO_LAST_ERR_OPEN_DEV_TIME 23
+#define HL_INFO_CS_TIMEOUT_EVENT 24
+#define HL_INFO_RAZWI_EVENT 25
-#define HL_INFO_VERSION_MAX_LEN 128
+#define HL_INFO_VERSION_MAX_LEN 128
#define HL_INFO_CARD_NAME_MAX_LEN 16
+/**
+ * struct hl_info_hw_ip_info - hardware information on various IPs in the ASIC
+ * @sram_base_address: The first SRAM physical base address that is free to be
+ * used by the user.
+ * @dram_base_address: The first DRAM virtual or physical base address that is
+ * free to be used by the user.
+ * @dram_size: The DRAM size that is available to the user.
+ * @sram_size: The SRAM size that is available to the user.
+ * @num_of_events: The number of events that can be received from the f/w. This
+ * is needed so the user can what is the size of the h/w events
+ * array he needs to pass to the kernel when he wants to fetch
+ * the event counters.
+ * @device_id: PCI device ID of the ASIC.
+ * @module_id: Module ID of the ASIC for mezzanine cards in servers
+ * (From OCP spec).
+ * @first_available_interrupt_id: The first available interrupt ID for the user
+ * to be used when it works with user interrupts.
+ * @server_type: Server type that the Gaudi ASIC is currently installed in.
+ * The value is according to enum hl_server_type
+ * @cpld_version: CPLD version on the board.
+ * @psoc_pci_pll_nr: PCI PLL NR value. Needed by the profiler in some ASICs.
+ * @psoc_pci_pll_nf: PCI PLL NF value. Needed by the profiler in some ASICs.
+ * @psoc_pci_pll_od: PCI PLL OD value. Needed by the profiler in some ASICs.
+ * @psoc_pci_pll_div_factor: PCI PLL DIV factor value. Needed by the profiler
+ * in some ASICs.
+ * @tpc_enabled_mask: Bit-mask that represents which TPCs are enabled. Relevant
+ * for Goya/Gaudi only.
+ * @dram_enabled: Whether the DRAM is enabled.
+ * @cpucp_version: The CPUCP f/w version.
+ * @card_name: The card name as passed by the f/w.
+ * @dram_page_size: The DRAM physical page size.
+ */
struct hl_info_hw_ip_info {
__u64 sram_base_address;
__u64 dram_base_address;
__u64 dram_size;
__u32 sram_size;
__u32 num_of_events;
- __u32 device_id; /* PCI Device ID */
- __u32 module_id; /* For mezzanine cards in servers (From OCP spec.) */
+ __u32 device_id;
+ __u32 module_id;
__u32 reserved;
__u16 first_available_interrupt_id;
- __u16 reserved2;
+ __u16 server_type;
__u32 cpld_version;
__u32 psoc_pci_pll_nr;
__u32 psoc_pci_pll_nf;
@@ -322,7 +426,7 @@
__u8 pad[2];
__u8 cpucp_version[HL_INFO_VERSION_MAX_LEN];
__u8 card_name[HL_INFO_CARD_NAME_MAX_LEN];
- __u64 reserved3;
+ __u64 reserved2;
__u64 dram_page_size;
};
@@ -385,15 +489,27 @@
__u64 replay_cnt;
};
-#define HL_CLK_THROTTLE_POWER 0x1
-#define HL_CLK_THROTTLE_THERMAL 0x2
+enum hl_clk_throttling_type {
+ HL_CLK_THROTTLE_TYPE_POWER,
+ HL_CLK_THROTTLE_TYPE_THERMAL,
+ HL_CLK_THROTTLE_TYPE_MAX
+};
+
+/* clk_throttling_reason masks */
+#define HL_CLK_THROTTLE_POWER (1 << HL_CLK_THROTTLE_TYPE_POWER)
+#define HL_CLK_THROTTLE_THERMAL (1 << HL_CLK_THROTTLE_TYPE_THERMAL)
/**
* struct hl_info_clk_throttle - clock throttling reason
* @clk_throttling_reason: each bit represents a clk throttling reason
+ * @clk_throttling_timestamp_us: represents CPU timestamp in microseconds of the start-event
+ * @clk_throttling_duration_ns: the clock throttle time in nanosec
*/
struct hl_info_clk_throttle {
__u32 clk_throttling_reason;
+ __u32 pad;
+ __u64 clk_throttling_timestamp_us[HL_CLK_THROTTLE_TYPE_MAX];
+ __u64 clk_throttling_duration_ns[HL_CLK_THROTTLE_TYPE_MAX];
};
/**
@@ -411,6 +527,24 @@
};
/**
+ * struct hl_open_stats_info - device open statistics information
+ * @open_counter: ever growing counter, increased on each successful dev open
+ * @last_open_period_ms: duration (ms) device was open last time
+ */
+struct hl_open_stats_info {
+ __u64 open_counter;
+ __u64 last_open_period_ms;
+};
+
+/**
+ * struct hl_power_info - power information
+ * @power: power consumption
+ */
+struct hl_power_info {
+ __u64 power;
+};
+
+/**
* struct hl_info_sync_manager - sync manager information
* @first_available_sync_object: first available sob
* @first_available_monitor: first available monitor
@@ -453,6 +587,51 @@
__u64 ctx_validation_drop_cnt;
};
+/**
+ * struct hl_info_last_err_open_dev_time - last error boot information.
+ * @timestamp: timestamp of last time the device was opened and error occurred.
+ */
+struct hl_info_last_err_open_dev_time {
+ __s64 timestamp;
+};
+
+/**
+ * struct hl_info_cs_timeout_event - last CS timeout information.
+ * @timestamp: timestamp when last CS timeout event occurred.
+ * @seq: sequence number of last CS timeout event.
+ */
+struct hl_info_cs_timeout_event {
+ __s64 timestamp;
+ __u64 seq;
+};
+
+#define HL_RAZWI_PAGE_FAULT 0
+#define HL_RAZWI_MMU_ACCESS_ERROR 1
+
+/**
+ * struct hl_info_razwi_event - razwi information.
+ * @timestamp: timestamp of razwi.
+ * @addr: address which accessing it caused razwi.
+ * @engine_id_1: engine id of the razwi initiator, if it was initiated by engine that does not
+ * have engine id it will be set to U16_MAX.
+ * @engine_id_2: second engine id of razwi initiator. Might happen that razwi have 2 possible
+ * engines which one them caused the razwi. In that case, it will contain the
+ * second possible engine id, otherwise it will be set to U16_MAX.
+ * @no_engine_id: if razwi initiator does not have engine id, this field will be set to 1,
+ * otherwise 0.
+ * @error_type: cause of razwi, page fault or access error, otherwise it will be set to U8_MAX.
+ * @pad: padding to 64 bit.
+ */
+struct hl_info_razwi_event {
+ __s64 timestamp;
+ __u64 addr;
+ __u16 engine_id_1;
+ __u16 engine_id_2;
+ __u8 no_engine_id;
+ __u8 error_type;
+ __u8 pad[2];
+};
+
enum gaudi_dcores {
HL_GAUDI_WS_DCORE,
HL_GAUDI_WN_DCORE,
@@ -460,33 +639,30 @@
HL_GAUDI_ES_DCORE
};
+/**
+ * struct hl_info_args - Main structure to retrieve device related information.
+ * @return_pointer: User space address of the relevant structure related to HL_INFO_* operation
+ * mentioned in @op.
+ * @return_size: Size of the structure used in @return_pointer, just like "size" in "snprintf", it
+ * limits how many bytes the kernel can write. For hw_events array, the size should be
+ * hl_info_hw_ip_info.num_of_events * sizeof(__u32).
+ * @op: Defines which type of information to be retrieved. Refer HL_INFO_* for details.
+ * @dcore_id: DCORE id for which the information is relevant (for Gaudi refer to enum gaudi_dcores).
+ * @ctx_id: Context ID of the user. Currently not in use.
+ * @period_ms: Period value, in milliseconds, for utilization rate in range 100ms - 1000ms in 100 ms
+ * resolution. Currently not in use.
+ * @pll_index: Index as defined in hl_<asic type>_pll_index enumeration.
+ * @pad: Padding to 64 bit.
+ */
struct hl_info_args {
- /* Location of relevant struct in userspace */
__u64 return_pointer;
- /*
- * The size of the return value. Just like "size" in "snprintf",
- * it limits how many bytes the kernel can write
- *
- * For hw_events array, the size should be
- * hl_info_hw_ip_info.num_of_events * sizeof(__u32)
- */
__u32 return_size;
-
- /* HL_INFO_* */
__u32 op;
union {
- /* Dcore id for which the information is relevant.
- * For Gaudi refer to 'enum gaudi_dcores'
- */
__u32 dcore_id;
- /* Context ID - Currently not in use */
__u32 ctx_id;
- /* Period value for utilization rate (100ms - 1000ms, in 100ms
- * resolution.
- */
__u32 period_ms;
- /* PLL frequency retrieval */
__u32 pll_index;
};
@@ -504,7 +680,10 @@
#define HL_MAX_CB_SIZE (0x200000 - 32)
/* Indicates whether the command buffer should be mapped to the device's MMU */
-#define HL_CB_FLAGS_MAP 0x1
+#define HL_CB_FLAGS_MAP 0x1
+
+/* Used with HL_CB_OP_INFO opcode to get the device va address for kernel mapped CB */
+#define HL_CB_FLAGS_GET_DEVICE_VA 0x2
struct hl_cb_in {
/* Handle of CB or 0 if we want to create one */
@@ -526,11 +705,16 @@
/* Handle of CB */
__u64 cb_handle;
- /* Information about CB */
- struct {
- /* Usage count of CB */
- __u32 usage_cnt;
- __u32 pad;
+ union {
+ /* Information about CB */
+ struct {
+ /* Usage count of CB */
+ __u32 usage_cnt;
+ __u32 pad;
+ };
+
+ /* CB mapped address to device MMU */
+ __u64 device_va;
};
};
};
@@ -574,12 +758,21 @@
__u64 cb_handle;
/* Relevant only when HL_CS_FLAGS_WAIT or
- * HL_CS_FLAGS_COLLECTIVE_WAIT is set.
+ * HL_CS_FLAGS_COLLECTIVE_WAIT is set
* This holds address of array of u64 values that contain
- * signal CS sequence numbers. The wait described by this job
- * will listen on all those signals (wait event per signal)
+ * signal CS sequence numbers. The wait described by
+ * this job will listen on all those signals
+ * (wait event per signal)
*/
__u64 signal_seq_arr;
+
+ /*
+ * Relevant only when HL_CS_FLAGS_WAIT or
+ * HL_CS_FLAGS_COLLECTIVE_WAIT is set
+ * along with HL_CS_FLAGS_ENCAP_SIGNALS.
+ * This is the CS sequence which has the encapsulated signals.
+ */
+ __u64 encaps_signal_seq;
};
/* Index of queue to put the CB on */
@@ -597,6 +790,17 @@
* Number of entries in signal_seq_arr
*/
__u32 num_signal_seq_arr;
+
+ /* Relevant only when HL_CS_FLAGS_WAIT or
+ * HL_CS_FLAGS_COLLECTIVE_WAIT is set along
+ * with HL_CS_FLAGS_ENCAP_SIGNALS
+ * This set the signals range that the user want to wait for
+ * out of the whole reserved signals range.
+ * e.g if the signals range is 20, and user don't want
+ * to wait for signal 8, so he set this offset to 7, then
+ * he call the API again with 9 and so on till 20.
+ */
+ __u32 encaps_signal_offset;
};
/* HL_CS_CHUNK_FLAGS_* */
@@ -621,6 +825,30 @@
#define HL_CS_FLAGS_STAGED_SUBMISSION 0x40
#define HL_CS_FLAGS_STAGED_SUBMISSION_FIRST 0x80
#define HL_CS_FLAGS_STAGED_SUBMISSION_LAST 0x100
+#define HL_CS_FLAGS_CUSTOM_TIMEOUT 0x200
+#define HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT 0x400
+
+/*
+ * The encapsulated signals CS is merged into the existing CS ioctls.
+ * In order to use this feature need to follow the below procedure:
+ * 1. Reserve signals, set the CS type to HL_CS_FLAGS_RESERVE_SIGNALS_ONLY
+ * the output of this API will be the SOB offset from CFG_BASE.
+ * this address will be used to patch CB cmds to do the signaling for this
+ * SOB by incrementing it's value.
+ * for reverting the reservation use HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY
+ * CS type, note that this might fail if out-of-sync happened to the SOB
+ * value, in case other signaling request to the same SOB occurred between
+ * reserve-unreserve calls.
+ * 2. Use the staged CS to do the encapsulated signaling jobs.
+ * use HL_CS_FLAGS_STAGED_SUBMISSION and HL_CS_FLAGS_STAGED_SUBMISSION_FIRST
+ * along with HL_CS_FLAGS_ENCAP_SIGNALS flag, and set encaps_signal_offset
+ * field. This offset allows app to wait on part of the reserved signals.
+ * 3. Use WAIT/COLLECTIVE WAIT CS along with HL_CS_FLAGS_ENCAP_SIGNALS flag
+ * to wait for the encapsulated signals.
+ */
+#define HL_CS_FLAGS_ENCAP_SIGNALS 0x800
+#define HL_CS_FLAGS_RESERVE_SIGNALS_ONLY 0x1000
+#define HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY 0x2000
#define HL_CS_STATUS_SUCCESS 0
@@ -635,15 +863,33 @@
__u64 chunks_execute;
union {
- /* this holds address of array of hl_cs_chunk for store phase -
- * Currently not in use
- */
- __u64 chunks_store;
-
- /* Sequence number of a staged submission CS
- * valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set
+ /*
+ * Sequence number of a staged submission CS
+ * valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set and
+ * HL_CS_FLAGS_STAGED_SUBMISSION_FIRST is unset.
*/
__u64 seq;
+
+ /*
+ * Encapsulated signals handle id
+ * Valid for two flows:
+ * 1. CS with encapsulated signals:
+ * when HL_CS_FLAGS_STAGED_SUBMISSION and
+ * HL_CS_FLAGS_STAGED_SUBMISSION_FIRST
+ * and HL_CS_FLAGS_ENCAP_SIGNALS are set.
+ * 2. unreserve signals:
+ * valid when HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY is set.
+ */
+ __u32 encaps_sig_handle_id;
+
+ /* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */
+ struct {
+ /* Encapsulated signals number */
+ __u32 encaps_signals_count;
+
+ /* Encapsulated signals queue index (stream) */
+ __u32 encaps_signals_q_idx;
+ };
};
/* Number of chunks in restore phase array. Maximum number is
@@ -656,8 +902,10 @@
*/
__u32 num_chunks_execute;
- /* Number of chunks in restore phase array - Currently not in use */
- __u32 num_chunks_store;
+ /* timeout in seconds - valid only if HL_CS_FLAGS_CUSTOM_TIMEOUT
+ * is set
+ */
+ __u32 timeout;
/* HL_CS_FLAGS_* */
__u32 cs_flags;
@@ -667,14 +915,39 @@
};
struct hl_cs_out {
- /*
- * seq holds the sequence number of the CS to pass to wait ioctl. All
- * values are valid except for 0 and ULLONG_MAX
- */
- __u64 seq;
- /* HL_CS_STATUS_* */
+ union {
+ /*
+ * seq holds the sequence number of the CS to pass to wait
+ * ioctl. All values are valid except for 0 and ULLONG_MAX
+ */
+ __u64 seq;
+
+ /* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */
+ struct {
+ /* This is the resereved signal handle id */
+ __u32 handle_id;
+
+ /* This is the signals count */
+ __u32 count;
+ };
+ };
+
+ /* HL_CS_STATUS */
__u32 status;
- __u32 pad;
+
+ /*
+ * SOB base address offset
+ * Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY or HL_CS_FLAGS_SIGNAL is set
+ */
+ __u32 sob_base_addr_offset;
+
+ /*
+ * Count of completed signals in SOB before current signal submission.
+ * Valid only when (HL_CS_FLAGS_ENCAP_SIGNALS & HL_CS_FLAGS_STAGED_SUBMISSION)
+ * or HL_CS_FLAGS_SIGNAL is set
+ */
+ __u16 sob_count_before_submission;
+ __u16 pad[3];
};
union hl_cs_args {
@@ -682,21 +955,88 @@
struct hl_cs_out out;
};
+#define HL_WAIT_CS_FLAGS_INTERRUPT 0x2
+#define HL_WAIT_CS_FLAGS_INTERRUPT_MASK 0xFFF00000
+#define HL_WAIT_CS_FLAGS_MULTI_CS 0x4
+#define HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ 0x10
+
+#define HL_WAIT_MULTI_CS_LIST_MAX_LEN 32
+
struct hl_wait_cs_in {
- /* Command submission sequence number */
- __u64 seq;
- /* Absolute timeout to wait in microseconds */
- __u64 timeout_us;
+ union {
+ struct {
+ /*
+ * In case of wait_cs holds the CS sequence number.
+ * In case of wait for multi CS hold a user pointer to
+ * an array of CS sequence numbers
+ */
+ __u64 seq;
+ /* Absolute timeout to wait for command submission
+ * in microseconds
+ */
+ __u64 timeout_us;
+ };
+
+ struct {
+ union {
+ /* User address for completion comparison.
+ * upon interrupt, driver will compare the value pointed
+ * by this address with the supplied target value.
+ * in order not to perform any comparison, set address
+ * to all 1s.
+ * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT is set
+ */
+ __u64 addr;
+
+ /* cq_counters_handle to a kernel mapped cb which contains
+ * cq counters.
+ * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ is set
+ */
+ __u64 cq_counters_handle;
+ };
+
+ /* Target value for completion comparison */
+ __u64 target;
+ };
+ };
+
/* Context ID - Currently not in use */
__u32 ctx_id;
- __u32 pad;
+
+ /* HL_WAIT_CS_FLAGS_*
+ * If HL_WAIT_CS_FLAGS_INTERRUPT is set, this field should include
+ * interrupt id according to HL_WAIT_CS_FLAGS_INTERRUPT_MASK, in order
+ * not to specify an interrupt id ,set mask to all 1s.
+ */
+ __u32 flags;
+
+ union {
+ struct {
+ /* Multi CS API info- valid entries in multi-CS array */
+ __u8 seq_arr_len;
+ __u8 pad[7];
+ };
+
+ /* Absolute timeout to wait for an interrupt in microseconds.
+ * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT is set
+ */
+ __u64 interrupt_timeout_us;
+ };
+
+ /*
+ * cq counter offset inside the counters cb pointed by cq_counters_handle above.
+ * upon interrupt, driver will compare the value pointed
+ * by this address (cq_counters_handle + cq_counters_offset)
+ * with the supplied target value.
+ * relevant only when HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ is set
+ */
+ __u64 cq_counters_offset;
};
#define HL_WAIT_CS_STATUS_COMPLETED 0
#define HL_WAIT_CS_STATUS_BUSY 1
#define HL_WAIT_CS_STATUS_TIMEDOUT 2
#define HL_WAIT_CS_STATUS_ABORTED 3
-#define HL_WAIT_CS_STATUS_INTERRUPTED 4
#define HL_WAIT_CS_STATUS_FLAG_GONE 0x1
#define HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD 0x2
@@ -706,8 +1046,15 @@
__u32 status;
/* HL_WAIT_CS_STATUS_FLAG* */
__u32 flags;
- /* valid only if HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD is set */
+ /*
+ * valid only if HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD is set
+ * for wait_cs: timestamp of CS completion
+ * for wait_multi_cs: timestamp of FIRST CS completion
+ */
__s64 timestamp_nsec;
+ /* multi CS completion bitmap */
+ __u32 cs_completion_map;
+ __u32 pad;
};
union hl_wait_cs_args {
@@ -725,11 +1072,16 @@
#define HL_MEM_OP_UNMAP 3
/* Opcode to map a hw block */
#define HL_MEM_OP_MAP_BLOCK 4
+/* Opcode to create DMA-BUF object for an existing device memory allocation
+ * and to export an FD of that DMA-BUF back to the caller
+ */
+#define HL_MEM_OP_EXPORT_DMABUF_FD 5
/* Memory flags */
#define HL_MEM_CONTIGUOUS 0x1
#define HL_MEM_SHARED 0x2
#define HL_MEM_USERPTR 0x4
+#define HL_MEM_FORCE_HINT 0x8
struct hl_mem_in {
union {
@@ -795,11 +1147,26 @@
/* Virtual address returned from HL_MEM_OP_MAP */
__u64 device_virt_addr;
} unmap;
+
+ /* HL_MEM_OP_EXPORT_DMABUF_FD */
+ struct {
+ /* Handle returned from HL_MEM_OP_ALLOC. In Gaudi,
+ * where we don't have MMU for the device memory, the
+ * driver expects a physical address (instead of
+ * a handle) in the device memory space.
+ */
+ __u64 handle;
+ /* Size of memory allocation. Relevant only for GAUDI */
+ __u64 mem_size;
+ } export_dmabuf_fd;
};
/* HL_MEM_OP_* */
__u32 op;
- /* HL_MEM_* flags */
+ /* HL_MEM_* flags.
+ * For the HL_MEM_OP_EXPORT_DMABUF_FD opcode, this field holds the
+ * DMA-BUF file/FD flags.
+ */
__u32 flags;
/* Context ID - Currently not in use */
__u32 ctx_id;
@@ -836,6 +1203,13 @@
__u32 pad;
};
+
+ /* Returned in HL_MEM_OP_EXPORT_DMABUF_FD. Represents the
+ * DMA-BUF object that was created to describe a memory
+ * allocation on the device's memory space. The FD should be
+ * passed to the importer driver
+ */
+ __s32 fd;
};
};
@@ -999,8 +1373,8 @@
* Each JOB will be enqueued on a specific queue, according to the user's input.
* There can be more then one JOB per queue.
*
- * The CS IOCTL will receive three sets of JOBS. One set is for "restore" phase,
- * a second set is for "execution" phase and a third set is for "store" phase.
+ * The CS IOCTL will receive two sets of JOBS. One set is for "restore" phase
+ * and a second set is for "execution" phase.
* The JOBS on the "restore" phase are enqueued only after context-switch
* (or if its the first CS for this context). The user can also order the
* driver to run the "restore" phase explicitly
@@ -1057,7 +1431,8 @@
* EIO - The CS was aborted (usually because the device was reset)
* ENODEV - The device wants to do hard-reset (so user need to close FD)
*
- * The driver also returns a custom define inside the IOCTL which can be:
+ * The driver also returns a custom define in case the IOCTL call returned 0.
+ * The define can be one of the following:
*
* HL_WAIT_CS_STATUS_COMPLETED - The CS has been completed successfully (0)
* HL_WAIT_CS_STATUS_BUSY - The CS is still executing (0)
@@ -1065,8 +1440,6 @@
* (ETIMEDOUT)
* HL_WAIT_CS_STATUS_ABORTED - The CS was aborted, usually because the
* device was reset (EIO)
- * HL_WAIT_CS_STATUS_INTERRUPTED - Waiting for the CS was interrupted (EINTR)
- *
*/
#define HL_IOCTL_WAIT_CS \
diff --git a/original/uapi/misc/uacce/hisi_qm.h b/original/uapi/misc/uacce/hisi_qm.h
index 6435f0b..1faef5f 100644
--- a/original/uapi/misc/uacce/hisi_qm.h
+++ b/original/uapi/misc/uacce/hisi_qm.h
@@ -16,6 +16,7 @@
#define HISI_QM_API_VER_BASE "hisi_qm_v1"
#define HISI_QM_API_VER2_BASE "hisi_qm_v2"
+#define HISI_QM_API_VER3_BASE "hisi_qm_v3"
/* UACCE_CMD_QM_SET_QP_CTX: Set qp algorithm type */
#define UACCE_CMD_QM_SET_QP_CTX _IOWR('H', 10, struct hisi_qp_ctx)
diff --git a/original/uapi/mtd/mtd-abi.h b/original/uapi/mtd/mtd-abi.h
index 65b9db9..b869990 100644
--- a/original/uapi/mtd/mtd-abi.h
+++ b/original/uapi/mtd/mtd-abi.h
@@ -205,6 +205,8 @@
* without OOB, e.g., NOR flash.
*/
#define MEMWRITE _IOWR('M', 24, struct mtd_write_req)
+/* Erase a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
+#define OTPERASE _IOW('M', 25, struct otp_info)
/*
* Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/original/uapi/rdma/bnxt_re-abi.h b/original/uapi/rdma/bnxt_re-abi.h
index dc52e3c..b1de99b 100644
--- a/original/uapi/rdma/bnxt_re-abi.h
+++ b/original/uapi/rdma/bnxt_re-abi.h
@@ -49,7 +49,14 @@
#define BNXT_RE_CHIP_ID0_CHIP_MET_SFT 0x18
enum {
- BNXT_RE_UCNTX_CMASK_HAVE_CCTX = 0x1ULL
+ BNXT_RE_UCNTX_CMASK_HAVE_CCTX = 0x1ULL,
+ BNXT_RE_UCNTX_CMASK_HAVE_MODE = 0x02ULL,
+};
+
+enum bnxt_re_wqe_mode {
+ BNXT_QPLIB_WQE_MODE_STATIC = 0x00,
+ BNXT_QPLIB_WQE_MODE_VARIABLE = 0x01,
+ BNXT_QPLIB_WQE_MODE_INVALID = 0x02,
};
struct bnxt_re_uctx_resp {
@@ -62,6 +69,8 @@
__aligned_u64 comp_mask;
__u32 chip_id0;
__u32 chip_id1;
+ __u32 mode;
+ __u32 rsvd1; /* padding */
};
/*
diff --git a/original/uapi/rdma/efa-abi.h b/original/uapi/rdma/efa-abi.h
index f89fbb5..08035cc 100644
--- a/original/uapi/rdma/efa-abi.h
+++ b/original/uapi/rdma/efa-abi.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */
/*
- * Copyright 2018-2020 Amazon.com, Inc. or its affiliates. All rights reserved.
+ * Copyright 2018-2021 Amazon.com, Inc. or its affiliates. All rights reserved.
*/
#ifndef EFA_ABI_USER_H
@@ -52,11 +52,20 @@
__u8 reserved_30[2];
};
+enum {
+ EFA_CREATE_CQ_WITH_COMPLETION_CHANNEL = 1 << 0,
+};
+
struct efa_ibv_create_cq {
__u32 comp_mask;
__u32 cq_entry_size;
__u16 num_sub_cqs;
- __u8 reserved_50[6];
+ __u8 flags;
+ __u8 reserved_58[5];
+};
+
+enum {
+ EFA_CREATE_CQ_RESP_DB_OFF = 1 << 0,
};
struct efa_ibv_create_cq_resp {
@@ -65,7 +74,9 @@
__aligned_u64 q_mmap_key;
__aligned_u64 q_mmap_size;
__u16 cq_idx;
- __u8 reserved_d0[6];
+ __u8 reserved_d0[2];
+ __u32 db_off;
+ __aligned_u64 db_mmap_key;
};
enum {
@@ -106,6 +117,7 @@
enum {
EFA_QUERY_DEVICE_CAPS_RDMA_READ = 1 << 0,
EFA_QUERY_DEVICE_CAPS_RNR_RETRY = 1 << 1,
+ EFA_QUERY_DEVICE_CAPS_CQ_NOTIFICATIONS = 1 << 2,
};
struct efa_ibv_ex_query_device_resp {
diff --git a/original/uapi/rdma/hns-abi.h b/original/uapi/rdma/hns-abi.h
index 90b739d..f6fde06 100644
--- a/original/uapi/rdma/hns-abi.h
+++ b/original/uapi/rdma/hns-abi.h
@@ -77,15 +77,19 @@
HNS_ROCE_QP_CAP_RQ_RECORD_DB = 1 << 0,
HNS_ROCE_QP_CAP_SQ_RECORD_DB = 1 << 1,
HNS_ROCE_QP_CAP_OWNER_DB = 1 << 2,
+ HNS_ROCE_QP_CAP_DIRECT_WQE = 1 << 5,
};
struct hns_roce_ib_create_qp_resp {
__aligned_u64 cap_flags;
+ __aligned_u64 dwqe_mmap_key;
};
struct hns_roce_ib_alloc_ucontext_resp {
__u32 qp_tab_size;
__u32 cqe_size;
+ __u32 srq_tab_size;
+ __u32 reserved;
};
struct hns_roce_ib_alloc_pd_resp {
diff --git a/original/uapi/rdma/i40iw-abi.h b/original/uapi/rdma/i40iw-abi.h
deleted file mode 100644
index 79890ba..0000000
--- a/original/uapi/rdma/i40iw-abi.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (c) 2006 - 2016 Intel Corporation. All rights reserved.
- * Copyright (c) 2005 Topspin Communications. All rights reserved.
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
- * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- */
-
-#ifndef I40IW_ABI_H
-#define I40IW_ABI_H
-
-#include <linux/types.h>
-
-#define I40IW_ABI_VER 5
-
-struct i40iw_alloc_ucontext_req {
- __u32 reserved32;
- __u8 userspace_ver;
- __u8 reserved8[3];
-};
-
-struct i40iw_alloc_ucontext_resp {
- __u32 max_pds; /* maximum pds allowed for this user process */
- __u32 max_qps; /* maximum qps allowed for this user process */
- __u32 wq_size; /* size of the WQs (sq+rq) allocated to the mmaped area */
- __u8 kernel_ver;
- __u8 reserved[3];
-};
-
-struct i40iw_alloc_pd_resp {
- __u32 pd_id;
- __u8 reserved[4];
-};
-
-struct i40iw_create_cq_req {
- __aligned_u64 user_cq_buffer;
- __aligned_u64 user_shadow_area;
-};
-
-struct i40iw_create_qp_req {
- __aligned_u64 user_wqe_buffers;
- __aligned_u64 user_compl_ctx;
-
- /* UDA QP PHB */
- __aligned_u64 user_sq_phb; /* place for VA of the sq phb buff */
- __aligned_u64 user_rq_phb; /* place for VA of the rq phb buff */
-};
-
-enum i40iw_memreg_type {
- IW_MEMREG_TYPE_MEM = 0x0000,
- IW_MEMREG_TYPE_QP = 0x0001,
- IW_MEMREG_TYPE_CQ = 0x0002,
-};
-
-struct i40iw_mem_reg_req {
- __u16 reg_type; /* Memory, QP or CQ */
- __u16 cq_pages;
- __u16 rq_pages;
- __u16 sq_pages;
-};
-
-struct i40iw_create_cq_resp {
- __u32 cq_id;
- __u32 cq_size;
- __u32 mmap_db_index;
- __u32 reserved;
-};
-
-struct i40iw_create_qp_resp {
- __u32 qp_id;
- __u32 actual_sq_size;
- __u32 actual_rq_size;
- __u32 i40iw_drv_opt;
- __u16 push_idx;
- __u8 lsmm;
- __u8 rsvd2;
-};
-
-#endif
diff --git a/original/uapi/rdma/ib_user_ioctl_verbs.h b/original/uapi/rdma/ib_user_ioctl_verbs.h
index 2248379..3072e5d 100644
--- a/original/uapi/rdma/ib_user_ioctl_verbs.h
+++ b/original/uapi/rdma/ib_user_ioctl_verbs.h
@@ -240,6 +240,7 @@
RDMA_DRIVER_OCRDMA,
RDMA_DRIVER_NES,
RDMA_DRIVER_I40IW,
+ RDMA_DRIVER_IRDMA = RDMA_DRIVER_I40IW,
RDMA_DRIVER_VMW_PVRDMA,
RDMA_DRIVER_QEDR,
RDMA_DRIVER_HNS,
diff --git a/original/uapi/rdma/ib_user_mad.h b/original/uapi/rdma/ib_user_mad.h
index 90c0cf2..10b5f6a 100644
--- a/original/uapi/rdma/ib_user_mad.h
+++ b/original/uapi/rdma/ib_user_mad.h
@@ -143,7 +143,7 @@
*/
struct ib_user_mad {
struct ib_user_mad_hdr hdr;
- __aligned_u64 data[0];
+ __aligned_u64 data[];
};
/*
diff --git a/original/uapi/rdma/irdma-abi.h b/original/uapi/rdma/irdma-abi.h
new file mode 100644
index 0000000..a7085e0
--- /dev/null
+++ b/original/uapi/rdma/irdma-abi.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR Linux-OpenIB */
+/*
+ * Copyright (c) 2006 - 2021 Intel Corporation. All rights reserved.
+ * Copyright (c) 2005 Topspin Communications. All rights reserved.
+ * Copyright (c) 2005 Cisco Systems. All rights reserved.
+ * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
+ */
+
+#ifndef IRDMA_ABI_H
+#define IRDMA_ABI_H
+
+#include <linux/types.h>
+
+/* irdma must support legacy GEN_1 i40iw kernel
+ * and user-space whose last ABI ver is 5
+ */
+#define IRDMA_ABI_VER 5
+
+enum irdma_memreg_type {
+ IRDMA_MEMREG_TYPE_MEM = 0,
+ IRDMA_MEMREG_TYPE_QP = 1,
+ IRDMA_MEMREG_TYPE_CQ = 2,
+};
+
+struct irdma_alloc_ucontext_req {
+ __u32 rsvd32;
+ __u8 userspace_ver;
+ __u8 rsvd8[3];
+};
+
+struct irdma_alloc_ucontext_resp {
+ __u32 max_pds;
+ __u32 max_qps;
+ __u32 wq_size; /* size of the WQs (SQ+RQ) in the mmaped area */
+ __u8 kernel_ver;
+ __u8 rsvd[3];
+ __aligned_u64 feature_flags;
+ __aligned_u64 db_mmap_key;
+ __u32 max_hw_wq_frags;
+ __u32 max_hw_read_sges;
+ __u32 max_hw_inline;
+ __u32 max_hw_rq_quanta;
+ __u32 max_hw_wq_quanta;
+ __u32 min_hw_cq_size;
+ __u32 max_hw_cq_size;
+ __u16 max_hw_sq_chunk;
+ __u8 hw_rev;
+ __u8 rsvd2;
+};
+
+struct irdma_alloc_pd_resp {
+ __u32 pd_id;
+ __u8 rsvd[4];
+};
+
+struct irdma_resize_cq_req {
+ __aligned_u64 user_cq_buffer;
+};
+
+struct irdma_create_cq_req {
+ __aligned_u64 user_cq_buf;
+ __aligned_u64 user_shadow_area;
+};
+
+struct irdma_create_qp_req {
+ __aligned_u64 user_wqe_bufs;
+ __aligned_u64 user_compl_ctx;
+};
+
+struct irdma_mem_reg_req {
+ __u16 reg_type; /* enum irdma_memreg_type */
+ __u16 cq_pages;
+ __u16 rq_pages;
+ __u16 sq_pages;
+};
+
+struct irdma_modify_qp_req {
+ __u8 sq_flush;
+ __u8 rq_flush;
+ __u8 rsvd[6];
+};
+
+struct irdma_create_cq_resp {
+ __u32 cq_id;
+ __u32 cq_size;
+};
+
+struct irdma_create_qp_resp {
+ __u32 qp_id;
+ __u32 actual_sq_size;
+ __u32 actual_rq_size;
+ __u32 irdma_drv_opt;
+ __u16 push_idx;
+ __u8 lsmm;
+ __u8 rsvd;
+ __u32 qp_caps;
+};
+
+struct irdma_modify_qp_resp {
+ __aligned_u64 push_wqe_mmap_key;
+ __aligned_u64 push_db_mmap_key;
+ __u16 push_offset;
+ __u8 push_valid;
+ __u8 rsvd[5];
+};
+
+struct irdma_create_ah_resp {
+ __u32 ah_id;
+ __u8 rsvd[4];
+};
+#endif /* IRDMA_ABI_H */
diff --git a/original/uapi/rdma/mlx5-abi.h b/original/uapi/rdma/mlx5-abi.h
index 27905a0..86be4a9 100644
--- a/original/uapi/rdma/mlx5-abi.h
+++ b/original/uapi/rdma/mlx5-abi.h
@@ -50,6 +50,7 @@
MLX5_QP_FLAG_ALLOW_SCATTER_CQE = 1 << 8,
MLX5_QP_FLAG_PACKET_BASED_CREDIT_MODE = 1 << 9,
MLX5_QP_FLAG_UAR_PAGE_INDEX = 1 << 10,
+ MLX5_QP_FLAG_DCI_STREAM = 1 << 11,
};
enum {
@@ -101,6 +102,8 @@
MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_CORE_CLOCK_OFFSET = 1UL << 0,
MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_DUMP_FILL_MKEY = 1UL << 1,
MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_ECE = 1UL << 2,
+ MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_SQD2RTS = 1UL << 3,
+ MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_REAL_TIME_TS = 1UL << 4,
};
enum mlx5_user_cmds_supp_uhw {
@@ -236,6 +239,11 @@
__u32 reserved;
};
+struct mlx5_ib_dci_streams_caps {
+ __u8 max_log_num_concurent;
+ __u8 max_log_num_errored;
+};
+
enum mlx5_ib_query_dev_resp_flags {
/* Support 128B CQE compression */
MLX5_IB_QUERY_DEV_RESP_FLAGS_CQE_128B_COMP = 1 << 0,
@@ -264,12 +272,14 @@
struct mlx5_ib_sw_parsing_caps sw_parsing_caps;
struct mlx5_ib_striding_rq_caps striding_rq_caps;
__u32 tunnel_offloads_caps; /* enum mlx5_ib_tunnel_offloads */
- __u32 reserved;
+ struct mlx5_ib_dci_streams_caps dci_streams_caps;
+ __u16 reserved;
};
enum mlx5_ib_create_cq_flags {
MLX5_IB_CREATE_CQ_FLAGS_CQE_128B_PAD = 1 << 0,
MLX5_IB_CREATE_CQ_FLAGS_UAR_PAGE_INDEX = 1 << 1,
+ MLX5_IB_CREATE_CQ_FLAGS_REAL_TIME_TS = 1 << 2,
};
struct mlx5_ib_create_cq {
@@ -310,6 +320,11 @@
__u32 reserved;
};
+struct mlx5_ib_create_qp_dci_streams {
+ __u8 log_num_concurent;
+ __u8 log_num_errored;
+};
+
struct mlx5_ib_create_qp {
__aligned_u64 buf_addr;
__aligned_u64 db_addr;
@@ -324,7 +339,8 @@
__aligned_u64 access_key;
};
__u32 ece_options;
- __u32 reserved;
+ struct mlx5_ib_create_qp_dci_streams dci_streams;
+ __u16 reserved;
};
/* RX Hash function flags */
diff --git a/original/uapi/rdma/mlx5_user_ioctl_cmds.h b/original/uapi/rdma/mlx5_user_ioctl_cmds.h
index 3fd9b38..e539c84 100644
--- a/original/uapi/rdma/mlx5_user_ioctl_cmds.h
+++ b/original/uapi/rdma/mlx5_user_ioctl_cmds.h
@@ -41,6 +41,25 @@
MLX5_IB_ATTR_CREATE_FLOW_ACTION_FLAGS = (1U << UVERBS_ID_NS_SHIFT),
};
+enum mlx5_ib_dm_methods {
+ MLX5_IB_METHOD_DM_MAP_OP_ADDR = (1U << UVERBS_ID_NS_SHIFT),
+ MLX5_IB_METHOD_DM_QUERY,
+};
+
+enum mlx5_ib_dm_map_op_addr_attrs {
+ MLX5_IB_ATTR_DM_MAP_OP_ADDR_REQ_HANDLE = (1U << UVERBS_ID_NS_SHIFT),
+ MLX5_IB_ATTR_DM_MAP_OP_ADDR_REQ_OP,
+ MLX5_IB_ATTR_DM_MAP_OP_ADDR_RESP_START_OFFSET,
+ MLX5_IB_ATTR_DM_MAP_OP_ADDR_RESP_PAGE_INDEX,
+};
+
+enum mlx5_ib_query_dm_attrs {
+ MLX5_IB_ATTR_QUERY_DM_REQ_HANDLE = (1U << UVERBS_ID_NS_SHIFT),
+ MLX5_IB_ATTR_QUERY_DM_RESP_START_OFFSET,
+ MLX5_IB_ATTR_QUERY_DM_RESP_PAGE_INDEX,
+ MLX5_IB_ATTR_QUERY_DM_RESP_LENGTH,
+};
+
enum mlx5_ib_alloc_dm_attrs {
MLX5_IB_ATTR_ALLOC_DM_RESP_START_OFFSET = (1U << UVERBS_ID_NS_SHIFT),
MLX5_IB_ATTR_ALLOC_DM_RESP_PAGE_INDEX,
@@ -154,6 +173,7 @@
MLX5_IB_ATTR_DEVX_UMEM_REG_LEN,
MLX5_IB_ATTR_DEVX_UMEM_REG_ACCESS,
MLX5_IB_ATTR_DEVX_UMEM_REG_OUT_ID,
+ MLX5_IB_ATTR_DEVX_UMEM_REG_PGSZ_BITMAP,
};
enum mlx5_ib_devx_umem_dereg_attrs {
@@ -232,7 +252,7 @@
MLX5_IB_ATTR_QUERY_CONTEXT_RESP_UCTX = (1U << UVERBS_ID_NS_SHIFT),
};
-#define MLX5_IB_DW_MATCH_PARAM 0x90
+#define MLX5_IB_DW_MATCH_PARAM 0xA0
struct mlx5_ib_match_params {
__u32 match_params[MLX5_IB_DW_MATCH_PARAM];
@@ -300,4 +320,13 @@
};
+enum mlx5_ib_device_methods {
+ MLX5_IB_METHOD_QUERY_PORT = (1U << UVERBS_ID_NS_SHIFT),
+};
+
+enum mlx5_ib_query_port_attrs {
+ MLX5_IB_ATTR_QUERY_PORT_PORT_NUM = (1U << UVERBS_ID_NS_SHIFT),
+ MLX5_IB_ATTR_QUERY_PORT,
+};
+
#endif
diff --git a/original/uapi/rdma/mlx5_user_ioctl_verbs.h b/original/uapi/rdma/mlx5_user_ioctl_verbs.h
index 56b26ea..a21ca8e 100644
--- a/original/uapi/rdma/mlx5_user_ioctl_verbs.h
+++ b/original/uapi/rdma/mlx5_user_ioctl_verbs.h
@@ -83,5 +83,30 @@
MLX5_IB_UAPI_UAR_ALLOC_TYPE_NC = 0x1,
};
+enum mlx5_ib_uapi_query_port_flags {
+ MLX5_IB_UAPI_QUERY_PORT_VPORT = 1 << 0,
+ MLX5_IB_UAPI_QUERY_PORT_VPORT_VHCA_ID = 1 << 1,
+ MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_RX = 1 << 2,
+ MLX5_IB_UAPI_QUERY_PORT_VPORT_STEERING_ICM_TX = 1 << 3,
+ MLX5_IB_UAPI_QUERY_PORT_VPORT_REG_C0 = 1 << 4,
+ MLX5_IB_UAPI_QUERY_PORT_ESW_OWNER_VHCA_ID = 1 << 5,
+};
+
+struct mlx5_ib_uapi_reg {
+ __u32 value;
+ __u32 mask;
+};
+
+struct mlx5_ib_uapi_query_port {
+ __aligned_u64 flags;
+ __u16 vport;
+ __u16 vport_vhca_id;
+ __u16 esw_owner_vhca_id;
+ __u16 rsvd0;
+ __aligned_u64 vport_steering_icm_rx;
+ __aligned_u64 vport_steering_icm_tx;
+ struct mlx5_ib_uapi_reg reg_c0;
+};
+
#endif
diff --git a/original/uapi/rdma/rdma_netlink.h b/original/uapi/rdma/rdma_netlink.h
index d2f5b83..e50c357 100644
--- a/original/uapi/rdma/rdma_netlink.h
+++ b/original/uapi/rdma/rdma_netlink.h
@@ -293,6 +293,12 @@
RDMA_NLDEV_CMD_RES_MR_GET_RAW,
+ RDMA_NLDEV_CMD_RES_CTX_GET, /* can dump */
+
+ RDMA_NLDEV_CMD_RES_SRQ_GET, /* can dump */
+
+ RDMA_NLDEV_CMD_STAT_GET_STATUS,
+
RDMA_NLDEV_NUM_OPS
};
@@ -533,6 +539,21 @@
RDMA_NLDEV_ATTR_RES_RAW, /* binary */
+ RDMA_NLDEV_ATTR_RES_CTX, /* nested table */
+ RDMA_NLDEV_ATTR_RES_CTX_ENTRY, /* nested table */
+
+ RDMA_NLDEV_ATTR_RES_SRQ, /* nested table */
+ RDMA_NLDEV_ATTR_RES_SRQ_ENTRY, /* nested table */
+ RDMA_NLDEV_ATTR_RES_SRQN, /* u32 */
+
+ RDMA_NLDEV_ATTR_MIN_RANGE, /* u32 */
+ RDMA_NLDEV_ATTR_MAX_RANGE, /* u32 */
+
+ RDMA_NLDEV_SYS_ATTR_COPY_ON_FORK, /* u8 */
+
+ RDMA_NLDEV_ATTR_STAT_HWCOUNTER_INDEX, /* u32 */
+ RDMA_NLDEV_ATTR_STAT_HWCOUNTER_DYNAMIC, /* u8 */
+
/*
* Always the end
*/
diff --git a/original/uapi/rdma/rdma_user_rxe.h b/original/uapi/rdma/rdma_user_rxe.h
index 068433e..f09c5c9 100644
--- a/original/uapi/rdma/rdma_user_rxe.h
+++ b/original/uapi/rdma/rdma_user_rxe.h
@@ -98,8 +98,21 @@
__u32 remote_qpn;
__u32 remote_qkey;
__u16 pkey_index;
+ __u16 reserved;
+ __u32 ah_num;
+ __u32 pad[4];
+ struct rxe_av av;
} ud;
+ struct {
+ __aligned_u64 addr;
+ __aligned_u64 length;
+ __u32 mr_lkey;
+ __u32 mw_rkey;
+ __u32 rkey;
+ __u32 access;
+ } mw;
/* reg is only used by the kernel and is not part of the uapi */
+#ifdef __KERNEL__
struct {
union {
struct ib_mr *mr;
@@ -108,6 +121,7 @@
__u32 key;
__u32 access;
} reg;
+#endif
} wr;
};
@@ -131,14 +145,13 @@
__u32 sge_offset;
__u32 reserved;
union {
- __u8 inline_data[0];
- struct rxe_sge sge[0];
+ __DECLARE_FLEX_ARRAY(__u8, inline_data);
+ __DECLARE_FLEX_ARRAY(struct rxe_sge, sge);
};
};
struct rxe_send_wqe {
struct rxe_send_wr wr;
- struct rxe_av av;
__u32 status;
__u32 state;
__aligned_u64 iova;
@@ -158,6 +171,11 @@
struct rxe_dma_info dma;
};
+struct rxe_create_ah_resp {
+ __u32 ah_num;
+ __u32 reserved;
+};
+
struct rxe_create_cq_resp {
struct mminfo mi;
};
diff --git a/original/uapi/scsi/fc/fc_els.h b/original/uapi/scsi/fc/fc_els.h
index 91d4be9..c9812c5 100644
--- a/original/uapi/scsi/fc/fc_els.h
+++ b/original/uapi/scsi/fc/fc_els.h
@@ -41,6 +41,7 @@
ELS_REC = 0x13, /* read exchange concise */
ELS_SRR = 0x14, /* sequence retransmission request */
ELS_FPIN = 0x16, /* Fabric Performance Impact Notification */
+ ELS_EDC = 0x17, /* Exchange Diagnostic Capabilities */
ELS_RDP = 0x18, /* Read Diagnostic Parameters */
ELS_RDF = 0x19, /* Register Diagnostic Functions */
ELS_PRLI = 0x20, /* process login */
@@ -111,6 +112,7 @@
[ELS_REC] = "REC", \
[ELS_SRR] = "SRR", \
[ELS_FPIN] = "FPIN", \
+ [ELS_EDC] = "EDC", \
[ELS_RDP] = "RDP", \
[ELS_RDF] = "RDF", \
[ELS_PRLI] = "PRLI", \
@@ -218,6 +220,10 @@
enum fc_ls_tlv_dtag {
ELS_DTAG_LS_REQ_INFO = 0x00000001,
/* Link Service Request Information Descriptor */
+ ELS_DTAG_LNK_FAULT_CAP = 0x0001000D,
+ /* Link Fault Capability Descriptor */
+ ELS_DTAG_CG_SIGNAL_CAP = 0x0001000F,
+ /* Congestion Signaling Capability Descriptor */
ELS_DTAG_LNK_INTEGRITY = 0x00020001,
/* Link Integrity Notification Descriptor */
ELS_DTAG_DELIVERY = 0x00020002,
@@ -236,6 +242,8 @@
*/
#define FC_LS_TLV_DTAG_INIT { \
{ ELS_DTAG_LS_REQ_INFO, "Link Service Request Information" }, \
+ { ELS_DTAG_LNK_FAULT_CAP, "Link Fault Capability" }, \
+ { ELS_DTAG_CG_SIGNAL_CAP, "Congestion Signaling Capability" }, \
{ ELS_DTAG_LNK_INTEGRITY, "Link Integrity Notification" }, \
{ ELS_DTAG_DELIVERY, "Delivery Notification Present" }, \
{ ELS_DTAG_PEER_CONGEST, "Peer Congestion Notification" }, \
@@ -1144,4 +1152,102 @@
};
+/*
+ * Diagnostic Capability Descriptors for EDC ELS
+ */
+
+/*
+ * Diagnostic: Link Fault Capability Descriptor
+ */
+struct fc_diag_lnkflt_desc {
+ __be32 desc_tag; /* Descriptor Tag (0x0001000D) */
+ __be32 desc_len; /* Length of Descriptor (in bytes).
+ * Size of descriptor excluding
+ * desc_tag and desc_len fields.
+ * 12 bytes
+ */
+ __be32 degrade_activate_threshold;
+ __be32 degrade_deactivate_threshold;
+ __be32 fec_degrade_interval;
+};
+
+enum fc_edc_cg_signal_cap_types {
+ /* Note: Capability: bits 31:4 Rsvd; bits 3:0 are capabilities */
+ EDC_CG_SIG_NOTSUPPORTED = 0x00, /* neither supported */
+ EDC_CG_SIG_WARN_ONLY = 0x01,
+ EDC_CG_SIG_WARN_ALARM = 0x02, /* both supported */
+};
+
+/*
+ * Initializer useful for decoding table.
+ * Please keep this in sync with the above definitions.
+ */
+#define FC_EDC_CG_SIGNAL_CAP_TYPES_INIT { \
+ { EDC_CG_SIG_NOTSUPPORTED, "Signaling Not Supported" }, \
+ { EDC_CG_SIG_WARN_ONLY, "Warning Signal" }, \
+ { EDC_CG_SIG_WARN_ALARM, "Warning and Alarm Signals" }, \
+}
+
+enum fc_diag_cg_sig_freq_types {
+ EDC_CG_SIGFREQ_CNT_MIN = 1, /* Min Frequency Count */
+ EDC_CG_SIGFREQ_CNT_MAX = 999, /* Max Frequency Count */
+
+ EDC_CG_SIGFREQ_SEC = 0x1, /* Units: seconds */
+ EDC_CG_SIGFREQ_MSEC = 0x2, /* Units: milliseconds */
+};
+
+struct fc_diag_cg_sig_freq {
+ __be16 count; /* Time between signals
+ * note: upper 6 bits rsvd
+ */
+ __be16 units; /* Time unit for count
+ * note: upper 12 bits rsvd
+ */
+};
+
+/*
+ * Diagnostic: Congestion Signaling Capability Descriptor
+ */
+struct fc_diag_cg_sig_desc {
+ __be32 desc_tag; /* Descriptor Tag (0x0001000F) */
+ __be32 desc_len; /* Length of Descriptor (in bytes).
+ * Size of descriptor excluding
+ * desc_tag and desc_len fields.
+ * 16 bytes
+ */
+ __be32 xmt_signal_capability;
+ struct fc_diag_cg_sig_freq xmt_signal_frequency;
+ __be32 rcv_signal_capability;
+ struct fc_diag_cg_sig_freq rcv_signal_frequency;
+};
+
+/*
+ * ELS_EDC - Exchange Diagnostic Capabilities
+ */
+struct fc_els_edc {
+ __u8 edc_cmd; /* command (0x17) */
+ __u8 edc_zero[3]; /* specified as zero - part of cmd */
+ __be32 desc_len; /* Length of Descriptor List (in bytes).
+ * Size of ELS excluding edc_cmd,
+ * edc_zero and desc_len fields.
+ */
+ struct fc_tlv_desc desc[0];
+ /* Diagnostic Descriptor list */
+};
+
+/*
+ * ELS EDC LS_ACC Response.
+ */
+struct fc_els_edc_resp {
+ struct fc_els_ls_acc acc_hdr;
+ __be32 desc_list_len; /* Length of response (in
+ * bytes). Excludes acc_hdr
+ * and desc_list_len fields.
+ */
+ struct fc_els_lsri_desc lsri;
+ struct fc_tlv_desc desc[0];
+ /* Supported Diagnostic Descriptor list */
+};
+
+
#endif /* _FC_ELS_H_ */
diff --git a/original/uapi/sound/asoc.h b/original/uapi/sound/asoc.h
index da61398..0539492 100644
--- a/original/uapi/sound/asoc.h
+++ b/original/uapi/sound/asoc.h
@@ -240,8 +240,8 @@
struct snd_soc_tplg_private {
__le32 size; /* in bytes of private data */
union {
- char data[0];
- struct snd_soc_tplg_vendor_array array[0];
+ __DECLARE_FLEX_ARRAY(char, data);
+ __DECLARE_FLEX_ARRAY(struct snd_soc_tplg_vendor_array, array);
};
} __attribute__((packed));
diff --git a/original/uapi/sound/asound.h b/original/uapi/sound/asound.h
index 535a722..2d3e5df 100644
--- a/original/uapi/sound/asound.h
+++ b/original/uapi/sound/asound.h
@@ -56,8 +56,10 @@
* *
****************************************************************************/
+#define AES_IEC958_STATUS_SIZE 24
+
struct snd_aes_iec958 {
- unsigned char status[24]; /* AES/IEC958 channel status bits */
+ unsigned char status[AES_IEC958_STATUS_SIZE]; /* AES/IEC958 channel status bits */
unsigned char subcode[147]; /* AES/IEC958 subcode bits */
unsigned char pad; /* nothing */
unsigned char dig_subframe[4]; /* AES/IEC958 subframe bits */
@@ -202,6 +204,11 @@
#define SNDRV_PCM_FORMAT_S24_BE ((__force snd_pcm_format_t) 7) /* low three bytes */
#define SNDRV_PCM_FORMAT_U24_LE ((__force snd_pcm_format_t) 8) /* low three bytes */
#define SNDRV_PCM_FORMAT_U24_BE ((__force snd_pcm_format_t) 9) /* low three bytes */
+/*
+ * For S32/U32 formats, 'msbits' hardware parameter is often used to deliver information about the
+ * available bit count in most significant bit. It's for the case of so-called 'left-justified' or
+ * `right-padding` sample which has less width than 32 bit.
+ */
#define SNDRV_PCM_FORMAT_S32_LE ((__force snd_pcm_format_t) 10)
#define SNDRV_PCM_FORMAT_S32_BE ((__force snd_pcm_format_t) 11)
#define SNDRV_PCM_FORMAT_U32_LE ((__force snd_pcm_format_t) 12)
@@ -299,7 +306,8 @@
#define SNDRV_PCM_INFO_HAS_LINK_ABSOLUTE_ATIME 0x02000000 /* report absolute hardware link audio time, not reset on startup */
#define SNDRV_PCM_INFO_HAS_LINK_ESTIMATED_ATIME 0x04000000 /* report estimated link audio time */
#define SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME 0x08000000 /* report synchronized audio/system time */
-
+#define SNDRV_PCM_INFO_EXPLICIT_SYNC 0x10000000 /* needs explicit sync of pointers and data */
+#define SNDRV_PCM_INFO_NO_REWINDS 0x20000000 /* hardware can only support monotonic changes of appl_ptr */
#define SNDRV_PCM_INFO_DRAIN_TRIGGER 0x40000000 /* internal kernel flag - trigger in drain */
#define SNDRV_PCM_INFO_FIFO_IN_FRAMES 0x80000000 /* internal kernel flag - FIFO size is in frames */
@@ -710,7 +718,7 @@
* Raw MIDI section - /dev/snd/midi??
*/
-#define SNDRV_RAWMIDI_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 1)
+#define SNDRV_RAWMIDI_VERSION SNDRV_PROTOCOL_VERSION(2, 0, 2)
enum {
SNDRV_RAWMIDI_STREAM_OUTPUT = 0,
@@ -736,12 +744,38 @@
unsigned char reserved[64]; /* reserved for future use */
};
+#define SNDRV_RAWMIDI_MODE_FRAMING_MASK (7<<0)
+#define SNDRV_RAWMIDI_MODE_FRAMING_SHIFT 0
+#define SNDRV_RAWMIDI_MODE_FRAMING_NONE (0<<0)
+#define SNDRV_RAWMIDI_MODE_FRAMING_TSTAMP (1<<0)
+#define SNDRV_RAWMIDI_MODE_CLOCK_MASK (7<<3)
+#define SNDRV_RAWMIDI_MODE_CLOCK_SHIFT 3
+#define SNDRV_RAWMIDI_MODE_CLOCK_NONE (0<<3)
+#define SNDRV_RAWMIDI_MODE_CLOCK_REALTIME (1<<3)
+#define SNDRV_RAWMIDI_MODE_CLOCK_MONOTONIC (2<<3)
+#define SNDRV_RAWMIDI_MODE_CLOCK_MONOTONIC_RAW (3<<3)
+
+#define SNDRV_RAWMIDI_FRAMING_DATA_LENGTH 16
+
+struct snd_rawmidi_framing_tstamp {
+ /* For now, frame_type is always 0. Midi 2.0 is expected to add new
+ * types here. Applications are expected to skip unknown frame types.
+ */
+ __u8 frame_type;
+ __u8 length; /* number of valid bytes in data field */
+ __u8 reserved[2];
+ __u32 tv_nsec; /* nanoseconds */
+ __u64 tv_sec; /* seconds */
+ __u8 data[SNDRV_RAWMIDI_FRAMING_DATA_LENGTH];
+} __packed;
+
struct snd_rawmidi_params {
int stream;
size_t buffer_size; /* queue size in bytes */
size_t avail_min; /* minimum avail bytes for wakeup */
unsigned int no_active_sensing: 1; /* do not send active sensing byte in close() */
- unsigned char reserved[16]; /* reserved for future use */
+ unsigned int mode; /* For input data only, frame incoming data */
+ unsigned char reserved[12]; /* reserved for future use */
};
#ifndef __KERNEL__
@@ -757,6 +791,7 @@
#define SNDRV_RAWMIDI_IOCTL_PVERSION _IOR('W', 0x00, int)
#define SNDRV_RAWMIDI_IOCTL_INFO _IOR('W', 0x01, struct snd_rawmidi_info)
+#define SNDRV_RAWMIDI_IOCTL_USER_PVERSION _IOW('W', 0x02, int)
#define SNDRV_RAWMIDI_IOCTL_PARAMS _IOWR('W', 0x10, struct snd_rawmidi_params)
#define SNDRV_RAWMIDI_IOCTL_STATUS _IOWR('W', 0x20, struct snd_rawmidi_status)
#define SNDRV_RAWMIDI_IOCTL_DROP _IOW('W', 0x30, int)
@@ -974,7 +1009,7 @@
#define SNDRV_CTL_ELEM_ACCESS_WRITE (1<<1)
#define SNDRV_CTL_ELEM_ACCESS_READWRITE (SNDRV_CTL_ELEM_ACCESS_READ|SNDRV_CTL_ELEM_ACCESS_WRITE)
#define SNDRV_CTL_ELEM_ACCESS_VOLATILE (1<<2) /* control value may be changed without a notification */
-// (1 << 3) is unused.
+/* (1 << 3) is unused. */
#define SNDRV_CTL_ELEM_ACCESS_TLV_READ (1<<4) /* TLV read is possible */
#define SNDRV_CTL_ELEM_ACCESS_TLV_WRITE (1<<5) /* TLV write is possible */
#define SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE (SNDRV_CTL_ELEM_ACCESS_TLV_READ|SNDRV_CTL_ELEM_ACCESS_TLV_WRITE)
diff --git a/original/uapi/sound/firewire.h b/original/uapi/sound/firewire.h
index ae12826..39cf6eb 100644
--- a/original/uapi/sound/firewire.h
+++ b/original/uapi/sound/firewire.h
@@ -13,6 +13,7 @@
#define SNDRV_FIREWIRE_EVENT_DIGI00X_MESSAGE 0x746e736c
#define SNDRV_FIREWIRE_EVENT_MOTU_NOTIFICATION 0x64776479
#define SNDRV_FIREWIRE_EVENT_TASCAM_CONTROL 0x7473636d
+#define SNDRV_FIREWIRE_EVENT_MOTU_REGISTER_DSP_CHANGE 0x4d545244
struct snd_firewire_event_common {
unsigned int type; /* SNDRV_FIREWIRE_EVENT_xxx */
@@ -65,6 +66,12 @@
struct snd_firewire_tascam_change changes[0];
};
+struct snd_firewire_event_motu_register_dsp_change {
+ unsigned int type;
+ __u32 count; /* The number of changes. */
+ __u32 changes[]; /* Encoded event for change of register DSP. */
+};
+
union snd_firewire_event {
struct snd_firewire_event_common common;
struct snd_firewire_event_lock_status lock_status;
@@ -73,6 +80,7 @@
struct snd_firewire_event_digi00x_message digi00x_message;
struct snd_firewire_event_tascam_control tascam_control;
struct snd_firewire_event_motu_notification motu_notification;
+ struct snd_firewire_event_motu_register_dsp_change motu_register_dsp_change;
};
@@ -80,6 +88,9 @@
#define SNDRV_FIREWIRE_IOCTL_LOCK _IO('H', 0xf9)
#define SNDRV_FIREWIRE_IOCTL_UNLOCK _IO('H', 0xfa)
#define SNDRV_FIREWIRE_IOCTL_TASCAM_STATE _IOR('H', 0xfb, struct snd_firewire_tascam_state)
+#define SNDRV_FIREWIRE_IOCTL_MOTU_REGISTER_DSP_METER _IOR('H', 0xfc, struct snd_firewire_motu_register_dsp_meter)
+#define SNDRV_FIREWIRE_IOCTL_MOTU_COMMAND_DSP_METER _IOR('H', 0xfd, struct snd_firewire_motu_command_dsp_meter)
+#define SNDRV_FIREWIRE_IOCTL_MOTU_REGISTER_DSP_PARAMETER _IOR('H', 0xfe, struct snd_firewire_motu_register_dsp_parameter)
#define SNDRV_FIREWIRE_TYPE_DICE 1
#define SNDRV_FIREWIRE_TYPE_FIREWORKS 2
@@ -108,4 +119,143 @@
__be32 data[SNDRV_FIREWIRE_TASCAM_STATE_COUNT];
};
+/*
+ * In below MOTU models, software is allowed to control their DSP by accessing to registers.
+ * - 828mk2
+ * - 896hd
+ * - Traveler
+ * - 8 pre
+ * - Ultralite
+ * - 4 pre
+ * - Audio Express
+ *
+ * On the other hand, the status of DSP is split into specific messages included in the sequence of
+ * isochronous packet. ALSA firewire-motu driver gathers the messages and allow userspace applications
+ * to read it via ioctl. In 828mk2, 896hd, and Traveler, hardware meter for all of physical inputs
+ * are put into the message, while one pair of physical outputs is selected. The selection is done by
+ * LSB one byte in asynchronous write quadlet transaction to 0x'ffff'f000'0b2c.
+ *
+ * I note that V3HD/V4HD uses asynchronous transaction for the purpose. The destination address is
+ * registered to 0x'ffff'f000'0b38 and '0b3c by asynchronous write quadlet request. The size of
+ * message differs between 23 and 51 quadlets. For the case, the number of mixer bus can be extended
+ * up to 12.
+ */
+
+#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_INPUT_COUNT 24
+#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_OUTPUT_COUNT 24
+#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT \
+ (SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_INPUT_COUNT + SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_OUTPUT_COUNT)
+
+/**
+ * struct snd_firewire_motu_register_dsp_meter - the container for meter information in DSP
+ * controlled by register access
+ * @data: Signal level meters. The mapping between position and input/output channel is
+ * model-dependent.
+ *
+ * The structure expresses the part of DSP status for hardware meter. The u8 storage includes linear
+ * value for audio signal level between 0x00 and 0x7f.
+ */
+struct snd_firewire_motu_register_dsp_meter {
+ __u8 data[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_METER_COUNT];
+};
+
+#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT 4
+#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT 20
+#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_INPUT_COUNT 10
+#define SNDRV_FIREWIRE_MOTU_REGISTER_DSP_ALIGNED_INPUT_COUNT (SNDRV_FIREWIRE_MOTU_REGISTER_DSP_INPUT_COUNT + 2)
+
+/**
+ * snd_firewire_motu_register_dsp_parameter - the container for parameters of DSP controlled
+ * by register access.
+ * @mixer.source.gain: The gain of source to mixer.
+ * @mixer.source.pan: The L/R balance of source to mixer.
+ * @mixer.source.flag: The flag of source to mixer, including mute, solo.
+ * @mixer.source.paired_balance: The L/R balance of paired source to mixer, only for 4 pre and
+ * Audio Express.
+ * @mixer.source.paired_width: The width of paired source to mixer, only for 4 pre and
+ * Audio Express.
+ * @mixer.output.paired_volume: The volume of paired output from mixer.
+ * @mixer.output.paired_flag: The flag of paired output from mixer.
+ * @output.main_paired_volume: The volume of paired main output.
+ * @output.hp_paired_volume: The volume of paired hp output.
+ * @output.hp_paired_assignment: The source assigned to paired hp output.
+ * @output.reserved: Padding for 32 bit alignment for future extension.
+ * @line_input.boost_flag: The flags of boost for line inputs, only for 828mk2 and Traveler.
+ * @line_input.nominal_level_flag: The flags of nominal level for line inputs, only for 828mk2 and
+ * Traveler.
+ * @line_input.reserved: Padding for 32 bit alignment for future extension.
+ * @input.gain_and_invert: The value including gain and invert for input, only for Ultralite, 4 pre
+ * and Audio Express.
+ * @input.flag: The flag of input; e.g. jack detection, phantom power, and pad, only for Ultralite,
+ * 4 pre and Audio express.
+ * @reserved: Padding so that the size of structure is kept to 512 byte, but for future extension.
+ *
+ * The structure expresses the set of parameters for DSP controlled by register access.
+ */
+struct snd_firewire_motu_register_dsp_parameter {
+ struct {
+ struct {
+ __u8 gain[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
+ __u8 pan[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
+ __u8 flag[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
+ __u8 paired_balance[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
+ __u8 paired_width[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_SRC_COUNT];
+ } source[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT];
+ struct {
+ __u8 paired_volume[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT];
+ __u8 paired_flag[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_MIXER_COUNT];
+ } output;
+ } mixer;
+ struct {
+ __u8 main_paired_volume;
+ __u8 hp_paired_volume;
+ __u8 hp_paired_assignment;
+ __u8 reserved[5];
+ } output;
+ struct {
+ __u8 boost_flag;
+ __u8 nominal_level_flag;
+ __u8 reserved[6];
+ } line_input;
+ struct {
+ __u8 gain_and_invert[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_ALIGNED_INPUT_COUNT];
+ __u8 flag[SNDRV_FIREWIRE_MOTU_REGISTER_DSP_ALIGNED_INPUT_COUNT];
+ } input;
+ __u8 reserved[64];
+};
+
+/*
+ * In below MOTU models, software is allowed to control their DSP by command in frame of
+ * asynchronous transaction to 0x'ffff'0001'0000:
+ *
+ * - 828 mk3 (FireWire only and Hybrid)
+ * - 896 mk3 (FireWire only and Hybrid)
+ * - Ultralite mk3 (FireWire only and Hybrid)
+ * - Traveler mk3
+ * - Track 16
+ *
+ * On the other hand, the states of hardware meter is split into specific messages included in the
+ * sequence of isochronous packet. ALSA firewire-motu driver gathers the message and allow userspace
+ * application to read it via ioctl.
+ */
+
+#define SNDRV_FIREWIRE_MOTU_COMMAND_DSP_METER_COUNT 400
+
+/**
+ * struct snd_firewire_motu_command_dsp_meter - the container for meter information in DSP
+ * controlled by command
+ * @data: Signal level meters. The mapping between position and signal channel is model-dependent.
+ *
+ * The structure expresses the part of DSP status for hardware meter. The 32 bit storage is
+ * estimated to include IEEE 764 32 bit single precision floating point (binary32) value. It is
+ * expected to be linear value (not logarithm) for audio signal level between 0.0 and +1.0.
+ */
+struct snd_firewire_motu_command_dsp_meter {
+#ifdef __KERNEL__
+ __u32 data[SNDRV_FIREWIRE_MOTU_COMMAND_DSP_METER_COUNT];
+#else
+ float data[SNDRV_FIREWIRE_MOTU_COMMAND_DSP_METER_COUNT];
+#endif
+};
+
#endif /* _UAPI_SOUND_FIREWIRE_H_INCLUDED */
diff --git a/original/uapi/sound/snd_ar_tokens.h b/original/uapi/sound/snd_ar_tokens.h
new file mode 100644
index 0000000..440c072
--- /dev/null
+++ b/original/uapi/sound/snd_ar_tokens.h
@@ -0,0 +1,208 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#ifndef __SND_AR_TOKENS_H__
+#define __SND_AR_TOKENS_H__
+
+#define APM_SUB_GRAPH_PERF_MODE_LOW_POWER 0x1
+#define APM_SUB_GRAPH_PERF_MODE_LOW_LATENCY 0x2
+
+#define APM_SUB_GRAPH_DIRECTION_TX 0x1
+#define APM_SUB_GRAPH_DIRECTION_RX 0x2
+
+/** Scenario ID Audio Playback */
+#define APM_SUB_GRAPH_SID_AUDIO_PLAYBACK 0x1
+/* Scenario ID Audio Record */
+#define APM_SUB_GRAPH_SID_AUDIO_RECORD 0x2
+/* Scenario ID Voice call. */
+#define APM_SUB_GRAPH_SID_VOICE_CALL 0x3
+
+/* container capability ID Pre/Post Processing (PP) */
+#define APM_CONTAINER_CAP_ID_PP 0x1
+/* container capability ID Compression/Decompression (CD) */
+#define APM_CONTAINER_CAP_ID_CD 0x2
+/* container capability ID End Point(EP) */
+#define APM_CONTAINER_CAP_ID_EP 0x3
+/* container capability ID Offload (OLC) */
+#define APM_CONTAINER_CAP_ID_OLC 0x4
+
+/* container graph position Stream */
+#define APM_CONT_GRAPH_POS_STREAM 0x1
+/* container graph position Per Stream Per Device*/
+#define APM_CONT_GRAPH_POS_PER_STR_PER_DEV 0x2
+/* container graph position Stream-Device */
+#define APM_CONT_GRAPH_POS_STR_DEV 0x3
+/* container graph position Global Device */
+#define APM_CONT_GRAPH_POS_GLOBAL_DEV 0x4
+
+#define APM_PROC_DOMAIN_ID_MDSP 0x1
+#define APM_PROC_DOMAIN_ID_ADSP 0x2
+#define APM_PROC_DOMAIN_ID_SDSP 0x4
+#define APM_PROC_DOMAIN_ID_CDSP 0x5
+
+#define PCM_INTERLEAVED 1
+#define PCM_DEINTERLEAVED_PACKED 2
+#define PCM_DEINTERLEAVED_UNPACKED 3
+#define AR_I2S_WS_SRC_EXTERNAL 0
+#define AR_I2S_WS_SRC_INTERNAL 1
+
+enum ar_event_types {
+ AR_EVENT_NONE = 0,
+ AR_PGA_DAPM_EVENT
+};
+
+/*
+ * Kcontrol IDs
+ */
+#define SND_SOC_AR_TPLG_FE_BE_GRAPH_CTL_MIX 256
+#define SND_SOC_AR_TPLG_VOL_CTL 257
+
+/**
+ * %AR_TKN_U32_SUB_GRAPH_INSTANCE_ID: Sub Graph Instance Id
+ *
+ * %AR_TKN_U32_SUB_GRAPH_PERF_MODE: Performance mode of subgraph
+ * APM_SUB_GRAPH_PERF_MODE_LOW_POWER = 1,
+ * APM_SUB_GRAPH_PERF_MODE_LOW_LATENCY = 2
+ *
+ * %AR_TKN_U32_SUB_GRAPH_DIRECTION: Direction of subgraph
+ * APM_SUB_GRAPH_DIRECTION_TX = 1,
+ * APM_SUB_GRAPH_DIRECTION_RX = 2
+ *
+ * %AR_TKN_U32_SUB_GRAPH_SCENARIO_ID: Scenario ID for subgraph
+ * APM_SUB_GRAPH_SID_AUDIO_PLAYBACK = 1,
+ * APM_SUB_GRAPH_SID_AUDIO_RECORD = 2,
+ * APM_SUB_GRAPH_SID_VOICE_CALL = 3
+ *
+ * %AR_TKN_U32_CONTAINER_INSTANCE_ID: Container Instance ID
+ *
+ * %AR_TKN_U32_CONTAINER_CAPABILITY_ID: Container capability ID
+ * APM_CONTAINER_CAP_ID_PP = 1,
+ * APM_CONTAINER_CAP_ID_CD = 2,
+ * APM_CONTAINER_CAP_ID_EP = 3,
+ * APM_CONTAINER_CAP_ID_OLC = 4
+ *
+ * %AR_TKN_U32_CONTAINER_STACK_SIZE: Stack size in the container.
+ *
+ * %AR_TKN_U32_CONTAINER_GRAPH_POS: Graph Position
+ * APM_CONT_GRAPH_POS_STREAM = 1,
+ * APM_CONT_GRAPH_POS_PER_STR_PER_DEV = 2,
+ * APM_CONT_GRAPH_POS_STR_DEV = 3,
+ * APM_CONT_GRAPH_POS_GLOBAL_DEV = 4
+ *
+ * %AR_TKN_U32_CONTAINER_PROC_DOMAIN: Processor domain of container
+ * APM_PROC_DOMAIN_ID_MDSP = 1,
+ * APM_PROC_DOMAIN_ID_ADSP = 2,
+ * APM_PROC_DOMAIN_ID_SDSP = 4,
+ * APM_PROC_DOMAIN_ID_CDSP = 5
+ *
+ * %AR_TKN_U32_MODULE_ID: Module ID
+ *
+ * %AR_TKN_U32_MODULE_INSTANCE_ID: Module Instance ID.
+ *
+ * %AR_TKN_U32_MODULE_MAX_IP_PORTS: Module maximum input ports
+ *
+ * %AR_TKN_U32_MODULE_MAX_OP_PORTS: Module maximum output ports.
+ *
+ * %AR_TKN_U32_MODULE_IN_PORTS: Number of in ports
+ *
+ * %AR_TKN_U32_MODULE_OUT_PORTS: Number of out ports.
+ *
+ * %AR_TKN_U32_MODULE_SRC_OP_PORT_ID: Source module output port ID
+ *
+ * %AR_TKN_U32_MODULE_DST_IN_PORT_ID: Destination module input port ID
+ *
+ * %AR_TKN_U32_MODULE_HW_IF_IDX: Interface index types for I2S/LPAIF
+ *
+ * %AR_TKN_U32_MODULE_HW_IF_TYPE: Interface type
+ * LPAIF = 0,
+ * LPAIF_RXTX = 1,
+ * LPAIF_WSA = 2,
+ * LPAIF_VA = 3,
+ * LPAIF_AXI = 4
+ *
+ * %AR_TKN_U32_MODULE_FMT_INTERLEAVE: PCM Interleaving
+ * PCM_INTERLEAVED = 1,
+ * PCM_DEINTERLEAVED_PACKED = 2,
+ * PCM_DEINTERLEAVED_UNPACKED = 3
+ *
+ * %AR_TKN_U32_MODULE_FMT_DATA: data format
+ * FIXED POINT = 1,
+ * IEC60958 PACKETIZED = 3,
+ * IEC60958 PACKETIZED NON LINEAR = 8,
+ * COMPR OVER PCM PACKETIZED = 7,
+ * IEC61937 PACKETIZED = 2,
+ * GENERIC COMPRESSED = 5
+ *
+ * %AR_TKN_U32_MODULE_FMT_SAMPLE_RATE: sample rate
+ *
+ * %AR_TKN_U32_MODULE_FMT_BIT_DEPTH: bit depth
+ *
+ * %AR_TKN_U32_MODULE_SD_LINE_IDX: I2S serial data line idx
+ * I2S_SD0 = 1,
+ * I2S_SD1 = 2,
+ * I2S_SD2 = 3,
+ * I2S_SD3 = 4,
+ * I2S_QUAD01 = 5,
+ * I2S_QUAD23 = 6,
+ * I2S_6CHS = 7,
+ * I2S_8CHS = 8
+ *
+ * %AR_TKN_U32_MODULE_WS_SRC: Word Select Source
+ * AR_I2S_WS_SRC_EXTERNAL = 0,
+ * AR_I2S_WS_SRC_INTERNAL = 1,
+ *
+ * %AR_TKN_U32_MODULE_FRAME_SZ_FACTOR: Frame size factor
+ *
+ * %AR_TKN_U32_MODULE_LOG_CODE: Log Module Code
+ *
+ * %AR_TKN_U32_MODULE_LOG_TAP_POINT_ID: logging tap point of this module
+ *
+ * %AR_TKN_U32_MODULE_LOG_MODE: logging mode
+ * LOG_WAIT = 0,
+ * LOG_IMMEDIATELY = 1
+ *
+ * %AR_TKN_DAI_INDEX: dai index
+ *
+ */
+
+/* DAI Tokens */
+#define AR_TKN_DAI_INDEX 1
+/* SUB GRAPH Tokens */
+#define AR_TKN_U32_SUB_GRAPH_INSTANCE_ID 2
+#define AR_TKN_U32_SUB_GRAPH_PERF_MODE 3
+#define AR_TKN_U32_SUB_GRAPH_DIRECTION 4
+#define AR_TKN_U32_SUB_GRAPH_SCENARIO_ID 5
+
+/* Container Tokens */
+#define AR_TKN_U32_CONTAINER_INSTANCE_ID 100
+#define AR_TKN_U32_CONTAINER_CAPABILITY_ID 101
+#define AR_TKN_U32_CONTAINER_STACK_SIZE 102
+#define AR_TKN_U32_CONTAINER_GRAPH_POS 103
+#define AR_TKN_U32_CONTAINER_PROC_DOMAIN 104
+
+/* Module Tokens */
+#define AR_TKN_U32_MODULE_ID 200
+#define AR_TKN_U32_MODULE_INSTANCE_ID 201
+#define AR_TKN_U32_MODULE_MAX_IP_PORTS 202
+#define AR_TKN_U32_MODULE_MAX_OP_PORTS 203
+#define AR_TKN_U32_MODULE_IN_PORTS 204
+#define AR_TKN_U32_MODULE_OUT_PORTS 205
+#define AR_TKN_U32_MODULE_SRC_OP_PORT_ID 206
+#define AR_TKN_U32_MODULE_DST_IN_PORT_ID 207
+#define AR_TKN_U32_MODULE_SRC_INSTANCE_ID 208
+#define AR_TKN_U32_MODULE_DST_INSTANCE_ID 209
+
+
+#define AR_TKN_U32_MODULE_HW_IF_IDX 250
+#define AR_TKN_U32_MODULE_HW_IF_TYPE 251
+#define AR_TKN_U32_MODULE_FMT_INTERLEAVE 252
+#define AR_TKN_U32_MODULE_FMT_DATA 253
+#define AR_TKN_U32_MODULE_FMT_SAMPLE_RATE 254
+#define AR_TKN_U32_MODULE_FMT_BIT_DEPTH 255
+#define AR_TKN_U32_MODULE_SD_LINE_IDX 256
+#define AR_TKN_U32_MODULE_WS_SRC 257
+#define AR_TKN_U32_MODULE_FRAME_SZ_FACTOR 258
+#define AR_TKN_U32_MODULE_LOG_CODE 259
+#define AR_TKN_U32_MODULE_LOG_TAP_POINT_ID 260
+#define AR_TKN_U32_MODULE_LOG_MODE 261
+
+#endif /* __SND_AR_TOKENS_H__ */
diff --git a/original/uapi/sound/snd_sst_tokens.h b/original/uapi/sound/snd_sst_tokens.h
index 8ba0112..ff3748e 100644
--- a/original/uapi/sound/snd_sst_tokens.h
+++ b/original/uapi/sound/snd_sst_tokens.h
@@ -233,6 +233,8 @@
*
* %SKL_TKN_U32_ASTATE_CLK_SRC: Clock source for A-State entry
*
+ * %SKL_TKN_U32_FMT_CFG_IDX: Format config index
+ *
* module_id and loadable flags dont have tokens as these values will be
* read from the DSP FW manifest
*
@@ -324,7 +326,9 @@
SKL_TKN_U32_ASTATE_COUNT,
SKL_TKN_U32_ASTATE_KCPS,
SKL_TKN_U32_ASTATE_CLK_SRC,
- SKL_TKN_MAX = SKL_TKN_U32_ASTATE_CLK_SRC,
+
+ SKL_TKN_U32_FMT_CFG_IDX = 96,
+ SKL_TKN_MAX = SKL_TKN_U32_FMT_CFG_IDX,
};
#endif
diff --git a/original/uapi/sound/sof/tokens.h b/original/uapi/sound/sof/tokens.h
index a642bf3..b72fa38 100644
--- a/original/uapi/sound/sof/tokens.h
+++ b/original/uapi/sound/sof/tokens.h
@@ -51,6 +51,7 @@
#define SOF_TKN_SCHED_CORE 203
#define SOF_TKN_SCHED_FRAMES 204
#define SOF_TKN_SCHED_TIME_DOMAIN 205
+#define SOF_TKN_SCHED_DYNAMIC_PIPELINE 206
/* volume */
#define SOF_TKN_VOLUME_RAMP_STEP_TYPE 250
@@ -139,4 +140,9 @@
#define SOF_TKN_INTEL_HDA_RATE 1500
#define SOF_TKN_INTEL_HDA_CH 1501
+/* AFE */
+#define SOF_TKN_MEDIATEK_AFE_RATE 1600
+#define SOF_TKN_MEDIATEK_AFE_CH 1601
+#define SOF_TKN_MEDIATEK_AFE_FORMAT 1602
+
#endif
diff --git a/original/uapi/xen/gntdev.h b/original/uapi/xen/gntdev.h
index 9ac5515..7a71453 100644
--- a/original/uapi/xen/gntdev.h
+++ b/original/uapi/xen/gntdev.h
@@ -47,7 +47,13 @@
/*
* Inserts the grant references into the mapping table of an instance
* of gntdev. N.B. This does not perform the mapping, which is deferred
- * until mmap() is called with @index as the offset.
+ * until mmap() is called with @index as the offset. @index should be
+ * considered opaque to userspace, with one exception: if no grant
+ * references have ever been inserted into the mapping table of this
+ * instance, @index will be set to 0. This is necessary to use gntdev
+ * with userspace APIs that expect a file descriptor that can be
+ * mmap()'d at offset 0, such as Wayland. If @count is set to 0, this
+ * ioctl will fail.
*/
#define IOCTL_GNTDEV_MAP_GRANT_REF \
_IOC(_IOC_NONE, 'G', 0, sizeof(struct ioctl_gntdev_map_grant_ref))
