dev-lang/ghc/ghc-7.10.2-r1.ebuild - platform/external/gentoo/overlays/gentoo - Git at Google

 # Copyright 1999-2015 Gentoo Foundation
 # Distributed under the terms of the GNU General Public License v2
 # $Id$

 EAPI=5

 # to make make a crosscompiler use crossdev and symlink ghc tree into
 # cross overlay. result would look like 'cross-sparc-unknown-linux-gnu/ghc'
 #
 # 'CTARGET' definition and 'is_crosscompile' are taken from 'toolchain.eclass'
 export CTARGET=${CTARGET:-${CHOST}}
 if [[ ${CTARGET} = ${CHOST} ]] ; then
 	if [[ ${CATEGORY/cross-} != ${CATEGORY} ]] ; then
 		export CTARGET=${CATEGORY/cross-}
 	fi
 fi

 inherit autotools bash-completion-r1 eutils flag-o-matic ghc-package
 inherit multilib pax-utils toolchain-funcs versionator

 DESCRIPTION="The Glasgow Haskell Compiler"
 HOMEPAGE="http://www.haskell.org/ghc/"

 # we don't have any binaries yet
 arch_binaries=""

 # sorted!
 #arch_binaries="$arch_binaries alpha? ( http://code.haskell.org/~slyfox/ghc-alpha/ghc-bin-${PV}-alpha.tbz2 )"
 #arch_binaries="$arch_binaries arm? ( http://code.haskell.org/~slyfox/ghc-arm/ghc-bin-${PV}-arm.tbz2 )"
 arch_binaries="$arch_binaries amd64? ( http://code.haskell.org/~slyfox/ghc-amd64/ghc-bin-${PVR}-amd64-noncurses.tbz2 )"
 #arch_binaries="$arch_binaries ia64?  ( http://code.haskell.org/~slyfox/ghc-ia64/ghc-bin-${PV}-ia64-fixed-fiw.tbz2 )"
 #arch_binaries="$arch_binaries ppc? ( http://code.haskell.org/~slyfox/ghc-ppc/ghc-bin-${PV}-ppc.tbz2 )"
 #arch_binaries="$arch_binaries ppc64? ( http://code.haskell.org/~slyfox/ghc-ppc64/ghc-bin-${PV}-ppc64.tbz2 )"
 #arch_binaries="$arch_binaries sparc? ( http://code.haskell.org/~slyfox/ghc-sparc/ghc-bin-${PV}-sparc.tbz2 )"
 arch_binaries="$arch_binaries x86? ( http://code.haskell.org/~slyfox/ghc-x86/ghc-bin-${PVR}-x86-noncurses.tbz2 )"

 # various ports:
 #arch_binaries="$arch_binaries x86-fbsd? ( http://code.haskell.org/~slyfox/ghc-x86-fbsd/ghc-bin-${PV}-x86-fbsd.tbz2 )"

 # 0 - yet
 yet_binary() {
 	case "${ARCH}" in
 		#alpha) return 0 ;;
 		#arm)
 		#	ewarn "ARM binary is built on armv5tel-eabi toolchain. Use with caution."
 		#	return 0
 		#;;
 		amd64) return 0 ;;
 		#ia64) return 0 ;;
 		#ppc) return 0 ;;
 		#ppc64) return 0 ;;
 		#sparc) return 0 ;;
 		x86) return 0 ;;
 		*) return 1 ;;
 	esac
 }

 GHC_PV=${PV}
 #GHC_PV=7.10.1.20150630 # uncomment only for -rc ebuilds
 GHC_P=${PN}-${GHC_PV} # using ${P} is almost never correct

 #SRC_URI="!binary? ( http://downloads.haskell.org/~ghc/${PV/_rc/-rc}/${GHC_P}-src.tar.bz2 )"
 # Upstream tarball was repackaged and inplace-updated. CDN cached old version for
 # many users
 SRC_URI="!binary? ( http://dev.gentoo.org/~slyfox/distfiles/${GHC_P}-src.tar.bz2 )"
 S="${WORKDIR}"/${GHC_P}

 [[ -n $arch_binaries ]] && SRC_URI+=" !ghcbootstrap? ( $arch_binaries )"

 BUMP_LIBRARIES=(
 	# "hackage-name          hackage-version"
 	"binary                  0.7.5.0"
 	"hoopl                   3.10.1.0"
 	"transformers            0.4.3.0"
 )

 LICENSE="BSD"
 SLOT="0/${PV}"
 KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
 IUSE="doc ghcbootstrap ghcmakebinary +gmp"
 IUSE+=" binary"
 IUSE+=" elibc_glibc" # system stuff

 RDEPEND="
 	>=dev-lang/perl-5.6.1
 	>=dev-libs/gmp-5:=
 	sys-libs/ncurses:=[unicode]
 	!ghcmakebinary? ( virtual/libffi:= )
 	!kernel_Darwin? ( >=sys-devel/gcc-2.95.3:* )
 	kernel_linux? ( >=sys-devel/binutils-2.17:* )
 	kernel_SunOS? ( >=sys-devel/binutils-2.17:* )
 "

 # force dependency on >=gmp-5, even if >=gmp-4.1 would be enough. this is due to
 # that we want the binaries to use the latest versioun available, and not to be
 # built against gmp-4

 # similar for glibc. we have bootstrapped binaries against glibc-2.17
 DEPEND="${RDEPEND}
 	doc? ( app-text/docbook-xml-dtd:4.2
 		app-text/docbook-xml-dtd:4.5
 		app-text/docbook-xsl-stylesheets
 		>=dev-libs/libxslt-1.1.2 )
 	!ghcbootstrap? ( !prefix? ( elibc_glibc? ( >=sys-libs/glibc-2.17 ) ) )"

 PDEPEND="!ghcbootstrap? ( =app-admin/haskell-updater-1.2* )"

 REQUIRED_USE="?? ( ghcbootstrap binary )"

 # yeah, top-level 'use' sucks. I'd like to have it in 'src_install()'
 use binary && QA_PREBUILT="*"

 # haskell libraries built with cabal in configure mode, #515354
 QA_CONFIGURE_OPTIONS+=" --with-compiler --with-gcc"

 is_crosscompile() {
 	[[ ${CHOST} != ${CTARGET} ]]
 }

 append-ghc-cflags() {
 	local persistent compile assemble link
 	local flag ghcflag

 	for flag in $*; do
 		case ${flag} in
 			persistent)	persistent="yes";;
 			compile)	compile="yes";;
 			assemble)	assemble="yes";;
 			link)		link="yes";;
 			*)
 				[[ ${compile}  ]] && ghcflag="-optc${flag}"  CFLAGS+=" ${flag}" && GHC_FLAGS+=" ${ghcflag}" &&
 					[[ ${persistent} ]] && GHC_PERSISTENT_FLAGS+=" ${ghcflag}"
 				[[ ${assemble} ]] && ghcflag="-opta${flag}"  CFLAGS+=" ${flag}" && GHC_FLAGS+=" ${ghcflag}" &&
 					[[ ${persistent} ]] && GHC_PERSISTENT_FLAGS+=" ${ghcflag}"
 				[[ ${link}     ]] && ghcflag="-optl${flag}" LDFLAGS+=" ${flag}" && GHC_FLAGS+=" ${ghcflag}" &&
 					[[ ${persistent} ]] && GHC_PERSISTENT_FLAGS+=" ${ghcflag}"
 				;;
 		esac
 	done
 }

 # $1 - lib name (under libraries/)
 # $2 - lib version
 # example: bump_lib "transformers" "0.4.2.0"
 bump_lib() {
 	local pn=$1 pv=$2
 	local p=${pn}-${pv}
 	local f

 	einfo "Bumping ${pn} up to ${pv}"

 	for f in ghc.mk GNUmakefile; do
 		mv libraries/"${pn}"/$f "${WORKDIR}"/"${p}"/$f || die
 	done
 	mv libraries/"${pn}" "${WORKDIR}"/"${pn}".old || die
 	mv "${WORKDIR}"/"${p}" libraries/"${pn}" || die
 }

 update_SRC_URI() {
 	local p pn pv
 	for p in "${BUMP_LIBRARIES[@]}"; do
 		set -- $p
 		pn=$1 pv=$2

 		SRC_URI+=" mirror://hackage/package/${pn}/${pn}-${pv}.tar.gz"
 	done
 }

 update_SRC_URI

 bump_libs() {
 	local p pn pv
 	for p in "${BUMP_LIBRARIES[@]}"; do
 		set -- $p
 		pn=$1 pv=$2

 		bump_lib "${pn}" "${pv}"
 	done
 }

 ghc_setup_cflags() {
 	if is_crosscompile; then
 		export CFLAGS=${GHC_CFLAGS-"-O2 -pipe"}
 		export LDFLAGS=${GHC_LDFLAGS-"-Wl,-O1"}
 		einfo "Crosscompiling mode:"
 		einfo "   CHOST:   ${CHOST}"
 		einfo "   CTARGET: ${CTARGET}"
 		einfo "   CFLAGS:  ${CFLAGS}"
 		einfo "   LDFLAGS: ${LDFLAGS}"
 		return
 	fi
 	# We need to be very careful with the CFLAGS we ask ghc to pass through to
 	# gcc. There are plenty of flags which will make gcc produce output that
 	# breaks ghc in various ways. The main ones we want to pass through are
 	# -mcpu / -march flags. These are important for arches like alpha & sparc.
 	# We also use these CFLAGS for building the C parts of ghc, ie the rts.
 	strip-flags
 	strip-unsupported-flags

 	# Cmm can't parse line numbers #482086
 	replace-flags -ggdb[3-9] -ggdb2

 	GHC_FLAGS=""
 	GHC_PERSISTENT_FLAGS=""
 	for flag in ${CFLAGS}; do
 		case ${flag} in

 			# Ignore extra optimisation (ghc passes -O to gcc anyway)
 			# -O2 and above break on too many systems
 			-O*) ;;

 			# Arch and ABI flags are what we're really after
 			-m*) append-ghc-cflags compile assemble ${flag};;

 			# Sometimes it's handy to see backtrace of RTS
 			# to get an idea what happens there
 			-g*) append-ghc-cflags compile ${flag};;

 			# Ignore all other flags, including all -f* flags
 		esac
 	done

 	for flag in ${LDFLAGS}; do
 		append-ghc-cflags link ${flag}
 	done

 	# hardened-gcc needs to be disabled, because the mangler doesn't accept
 	# its output.
 	gcc-specs-pie && append-ghc-cflags persistent compile link -nopie
 	gcc-specs-ssp && append-ghc-cflags persistent compile      -fno-stack-protector

 	# prevent from failind building unregisterised ghc:
 	# http://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg171602.html
 	use ppc64 && append-ghc-cflags persistent compile -mminimal-toc
 	# fix the similar issue as ppc64 TOC on ia64. ia64 has limited size of small data
 	# currently ghc fails to build haddock
 	# http://osdir.com/ml/gnu.binutils.bugs/2004-10/msg00050.html
 	use ia64 && append-ghc-cflags persistent compile -G0
 }

 # substitutes string $1 to $2 in files $3 $4 ...
 relocate_path() {
 	local from=$1
 	local   to=$2
 	shift 2
 	local file=
 	for file in "$@"
 	do
 		sed -i -e "s|$from|$to|g" \
 			"$file" || die "path relocation failed for '$file'"
 	done
 }

 # changes hardcoded ghc paths and updates package index
 # $1 - new absolute root path
 relocate_ghc() {
 	local to=$1

 	# libdir for prebuilt binary and for current system may mismatch
 	# It does for prefix installation for example: bug #476998
 	local bin_ghc_prefix=${WORKDIR}/usr
 	local bin_libpath=$(echo "${bin_ghc_prefix}"/lib*)
 	local bin_libdir=${bin_libpath#${bin_ghc_prefix}/}

 	# backup original script to use it later after relocation
 	local gp_back="${T}/ghc-pkg-${GHC_PV}-orig"
 	cp "${WORKDIR}/usr/bin/ghc-pkg-${GHC_PV}" "$gp_back" || die "unable to backup ghc-pkg wrapper"

 	if [[ ${bin_libdir} != $(get_libdir) ]]; then
 		einfo "Relocating '${bin_libdir}' to '$(get_libdir)' (bug #476998)"
 		# moving the dir itself is not strictly needed
 		# but then USE=binary would result in installing
 		# in '${bin_libdir}'
 		mv "${bin_ghc_prefix}/${bin_libdir}" "${bin_ghc_prefix}/$(get_libdir)" || die

 		relocate_path "/usr/${bin_libdir}" "/usr/$(get_libdir)" \
 			"${WORKDIR}/usr/bin/ghc-${GHC_PV}" \
 			"${WORKDIR}/usr/bin/ghci-${GHC_PV}" \
 			"${WORKDIR}/usr/bin/ghc-pkg-${GHC_PV}" \
 			"${WORKDIR}/usr/bin/hsc2hs" \
 			"${WORKDIR}/usr/bin/runghc-${GHC_PV}" \
 			"$gp_back" \
 			"${WORKDIR}/usr/$(get_libdir)/${GHC_P}/package.conf.d/"*
 	fi

 	# Relocate from /usr to ${EPREFIX}/usr
 	relocate_path "/usr" "${to}/usr" \
 		"${WORKDIR}/usr/bin/ghc-${GHC_PV}" \
 		"${WORKDIR}/usr/bin/ghci-${GHC_PV}" \
 		"${WORKDIR}/usr/bin/ghc-pkg-${GHC_PV}" \
 		"${WORKDIR}/usr/bin/hsc2hs" \
 		"${WORKDIR}/usr/bin/runghc-${GHC_PV}" \
 		"${WORKDIR}/usr/$(get_libdir)/${GHC_P}/package.conf.d/"*

 	# this one we will use to regenerate cache
 	# so it should point to current tree location
 	relocate_path "/usr" "${WORKDIR}/usr" "$gp_back"

 	if use prefix; then
 		# and insert LD_LIBRARY_PATH entry to EPREFIX dir tree
 		# TODO: add the same for darwin's CHOST and it's DYLD_
 		local new_ldpath='LD_LIBRARY_PATH="'${EPREFIX}/$(get_libdir):${EPREFIX}/usr/$(get_libdir)'${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}"\nexport LD_LIBRARY_PATH'
 		sed -i -e '2i'"$new_ldpath" \
 			"${WORKDIR}/usr/bin/ghc-${GHC_PV}" \
 			"${WORKDIR}/usr/bin/ghci-${GHC_PV}" \
 			"${WORKDIR}/usr/bin/ghc-pkg-${GHC_PV}" \
 			"${WORKDIR}/usr/bin/hsc2hs" \
 			"${WORKDIR}/usr/bin/runghc-${GHC_PV}" \
 			"$gp_back" \
 			"${WORKDIR}/usr/bin/hsc2hs" \
 			|| die "Adding LD_LIBRARY_PATH for wrappers failed"
 	fi

 	# regenerate the binary package cache
 	"$gp_back" recache || die "failed to update cache after relocation"
 	rm "$gp_back"
 }

 pkg_setup() {
 	[[ ${MERGE_TYPE} == binary ]] && return

 	if use ghcbootstrap; then
 		ewarn "You requested ghc bootstrapping, this is usually only used"
 		ewarn "by Gentoo developers to make binary .tbz2 packages."

 		[[ -z $(type -P ghc) ]] && \
 			die "Could not find a ghc to bootstrap with."
 	else
 		if ! yet_binary; then
 			eerror "Please try emerging with USE=ghcbootstrap and report build"
 			eerror "sucess or failure to the haskell team (haskell@gentoo.org)"
 			die "No binary available for '${ARCH}' arch yet, USE=ghcbootstrap"
 		fi
 	fi
 }

 src_unpack() {
 	# Create the ${S} dir if we're using the binary version
 	use binary && mkdir "${S}"

 	# the Solaris and Darwin binaries from ghc (maeder) need to be
 	# unpacked separately, so prevent them from being unpacked
 	local ONLYA=${A}
 	case ${CHOST} in
 		*-darwin* | *-solaris*)  ONLYA=${GHC_P}-src.tar.bz2  ;;
 	esac
 	unpack ${ONLYA}

 	if [[ -d "${S}"/libraries/dph ]]; then
 		# Sometimes dph libs get accidentally shipped with ghc
 		# but they are not installed unless user requests it.
 		# We never install them.
 		elog "Removing 'libraries/dph'"
 		rm -rf "${S}"/libraries/dph
 	fi
 }

 src_prepare() {
 	ghc_setup_cflags

 	if ! use ghcbootstrap && [[ ${CHOST} != *-darwin* && ${CHOST} != *-solaris* ]]; then
 		# Modify the wrapper script from the binary tarball to use GHC_PERSISTENT_FLAGS.
 		# See bug #313635.
 		sed -i -e "s|\"\$topdir\"|\"\$topdir\" ${GHC_PERSISTENT_FLAGS}|" \
 			"${WORKDIR}/usr/bin/ghc-${GHC_PV}"

 		# allow hardened users use vanilla binary to bootstrap ghc
 		# ghci uses mmap with rwx protection at it implements dynamic
 		# linking on it's own (bug #299709)
 		pax-mark -m "${WORKDIR}/usr/$(get_libdir)/${GHC_P}/bin/ghc"
 	fi

 	if use binary; then
 		if use prefix; then
 			relocate_ghc "${EPREFIX}"
 		fi

 		# Move unpacked files to the expected place
 		mv "${WORKDIR}/usr" "${S}"
 	else
 		if ! use ghcbootstrap; then
 			case ${CHOST} in
 				*-darwin* | *-solaris*)
 				# UPDATE ME for ghc-7
 				mkdir "${WORKDIR}"/ghc-bin-installer || die
 				pushd "${WORKDIR}"/ghc-bin-installer > /dev/null || die
 				use sparc-solaris && unpack ghc-6.10.4-sparc-sun-solaris2.tar.bz2
 				use x86-solaris && unpack ghc-7.0.3-i386-unknown-solaris2.tar.bz2
 				use x86-macos && unpack ghc-7.4.1-i386-apple-darwin.tar.bz2
 				use x64-macos && unpack ghc-7.4.1-x86_64-apple-darwin.tar.bz2
 				popd > /dev/null

 				pushd "${WORKDIR}"/ghc-bin-installer/ghc-[67].?*.? > /dev/null || die
 				# fix the binaries so they run, on Solaris we need an
 				# LD_LIBRARY_PATH which has our prefix libdirs, on
 				# Darwin we need to replace the frameworks with our libs
 				# from the prefix fix before installation, because some
 				# of the tools are actually used during configure/make
 				if [[ ${CHOST} == *-solaris* ]] ; then
 					export LD_LIBRARY_PATH="${EPREFIX}/$(get_libdir):${EPREFIX}/usr/$(get_libdir):${LD_LIBRARY_PATH}"
 				elif [[ ${CHOST} == *-darwin* ]] ; then
 					local readline_framework=GNUreadline.framework/GNUreadline
 					local gmp_framework=/opt/local/lib/libgmp.10.dylib
 					local ncurses_file=/opt/local/lib/libncurses.5.dylib
 					for binary in $(scanmacho -BRE MH_EXECUTE -F '%F' .) ; do
 						install_name_tool -change \
 							${readline_framework} \
 							"${EPREFIX}"/lib/libreadline.dylib \
 							${binary} || die
 						install_name_tool -change \
 							${gmp_framework} \
 							"${EPREFIX}"/usr/lib/libgmp.dylib \
 							${binary} || die
 						install_name_tool -change \
 							${ncurses_file} \
 							"${EPREFIX}"/usr/lib/libncurses.dylib \
 							${binary} || die
 					done
 					# we don't do frameworks!
 					sed -i \
 						-e 's/\(frameworks = \)\["GMP"\]/\1[]/g' \
 						-e 's/\(extraLibraries = \)\["m"\]/\1["m","gmp"]/g' \
 						rts/package.conf.in || die
 				fi

 				# it is autoconf, but we really don't want to give it too
 				# much arguments, in fact we do the make in-place anyway
 				./configure --prefix="${WORKDIR}"/usr || die
 				make install || die
 				popd > /dev/null
 				;;
 				*)
 				relocate_ghc "${WORKDIR}"
 				;;
 			esac
 		fi

 		sed -i -e "s|\"\$topdir\"|\"\$topdir\" ${GHC_PERSISTENT_FLAGS}|" \
 			"${S}/ghc/ghc.wrapper"

 		cd "${S}" # otherwise epatch will break

 		epatch "${FILESDIR}"/${PN}-7.0.4-CHOST-prefix.patch

 		epatch "${FILESDIR}"/${PN}-7.8.2-cgen-constify.patch
 		epatch "${FILESDIR}"/${PN}-7.8.3-prim-lm.patch
 		epatch "${FILESDIR}"/${PN}-7.10.1-rc3-ghc-7.10-bootstrap.patch
 		epatch "${FILESDIR}"/${PN}-7.10.1-T10590-dequeue.patch
 		# Since ${S}/packages does not include base, etc. add them to gen_contents_index
 		sed -e 's@\(for REPO in .*\)@\1 base integer-gmp integer-gmp2 integer-simple template-haskell@' \
 			-i libraries/gen_contents_index || die

 		if use prefix; then
 			# Make configure find docbook-xsl-stylesheets from Prefix
 			sed -e '/^FP_DIR_DOCBOOK_XSL/s:\[.*\]:['"${EPREFIX}"'/usr/share/sgml/docbook/xsl-stylesheets/]:' \
 				-i utils/haddock/doc/configure.ac || die
 		fi

 		bump_libs

 		# as we have changed the build system
 		eautoreconf
 	fi
 }

 src_configure() {
 	if ! use binary; then
 		# initialize build.mk
 		echo '# Gentoo changes' > mk/build.mk

 		# Put docs into the right place, ie /usr/share/doc/ghc-${GHC_PV}
 		echo "docdir = ${EPREFIX}/usr/share/doc/${P}" >> mk/build.mk
 		echo "htmldir = ${EPREFIX}/usr/share/doc/${P}" >> mk/build.mk

 		# We also need to use the GHC_FLAGS flags when building ghc itself
 		echo "SRC_HC_OPTS+=${HCFLAGS} ${GHC_FLAGS}" >> mk/build.mk
 		echo "SRC_CC_OPTS+=${CFLAGS}" >> mk/build.mk
 		echo "SRC_LD_OPTS+=${LDFLAGS}" >> mk/build.mk

 		# We can't depend on haddock except when bootstrapping when we
 		# must build docs and include them into the binary .tbz2 package
 		# app-text/dblatex is not in portage, can not build PDF or PS
 		echo "BUILD_DOCBOOK_PDF  = NO"  >> mk/build.mk
 		echo "BUILD_DOCBOOK_PS   = NO"  >> mk/build.mk
 		if use doc; then
 			echo "BUILD_DOCBOOK_HTML = YES" >> mk/build.mk
 		else
 			echo "BUILD_DOCBOOK_HTML = NO" >> mk/build.mk
 		fi

 		# this controls presence on 'xhtml' and 'haddock' in final install
 		echo "HADDOCK_DOCS       = YES" >> mk/build.mk

 		# allows overriding build flavours for libraries:
 		# v   - vanilla (static libs)
 		# p   - profiled
 		# dyn - shared libraries
 		# example: GHC_LIBRARY_WAYS="v dyn"
 		if [[ -n ${GHC_LIBRARY_WAYS} ]]; then
 			echo "GhcLibWays=${GHC_LIBRARY_WAYS}" >> mk/build.mk
 		fi

 		# Get ghc from the unpacked binary .tbz2
 		# except when bootstrapping we just pick ghc up off the path
 		if ! use ghcbootstrap; then
 			export PATH="${WORKDIR}/usr/bin:${PATH}"
 		fi

 		if use gmp; then
 			echo "INTEGER_LIBRARY=integer-gmp2" >> mk/build.mk
 		else
 			echo "INTEGER_LIBRARY=integer-simple" >> mk/build.mk
 		fi

 		# don't strip anything. Very useful when stage2 SIGSEGVs on you
 		echo "STRIP_CMD = :" >> mk/build.mk

 		local econf_args=()

 		# GHC embeds 'gcc' it was built by and uses it later.
 		# Don't allow things like ccache or versioned binary slip.
 		# We use stable thing across gcc upgrades.
 		is_crosscompile || econf_args+=(--with-gcc=${CHOST}-gcc)

 		if use ghcmakebinary; then
 			# When building booting libary we are trying to
 			# bundle or restrict most of external depends
 			# with unstable ABI:
 			#  - embed libffi (default GHC behaviour)
 			#  - disable ncurses support for ghci (via haskeline)
 			#    https://bugs.gentoo.org/557478
 			#  - disable ncurses support for ghc-pkg
 			echo "libraries/haskeline_CONFIGURE_OPTS += --flag=-terminfo" >> mk/build.mk
 			echo "utils/ghc-pkg_HC_OPTS += -DBOOTSTRAPPING" >> mk/build.mk
 		else
 			econf_args+=(--with-system-libffi)
 			econf_args+=(--with-ffi-includes=$(pkg-config libffi --cflags-only-I | sed -e 's@^-I@@'))
 		fi

 		elog "Final mk/build.mk:"
 		cat mk/build.mk || die

 		econf ${econf_args[@]} --enable-bootstrap-with-devel-snapshot

 		if [[ ${PV} == *9999* ]]; then
 			GHC_PV="$(grep 'S\[\"PACKAGE_VERSION\"\]' config.status | sed -e 's@^.*=\"\(.*\)\"@\1@')"
 			GHC_P=${PN}-${GHC_PV}
 		fi
 		GHC_TPF="$(grep 'S\[\"TargetPlatformFull\"\]' config.status | sed -e 's@^.*=\"\(.*\)\"@\1@')"
 	fi # ! use binary
 }

 src_compile() {
 	if ! use binary; then
 		# 1. build compiler binary first
 		emake ghc/stage2/build/tmp/ghc-stage2
 		# 2. pax-mark (bug #516430)
 		pax-mark -m ghc/stage2/build/tmp/ghc-stage2
 		# 3. and then all the rest
 		emake all
 	fi # ! use binary
 }

 src_install() {
 	if use binary; then
 		use prefix && mkdir -p "${ED}"
 		mv "${S}/usr" "${ED}"
 	else

 		emake -j1 install DESTDIR="${D}"
 		dodoc "distrib/README" "ANNOUNCE" "LICENSE" "VERSION"

 		# rename ghc-shipped files to avoid collision
 		# of external packages. Motivating example:
 		#  user had installed:
 		#      dev-lang/ghc-7.8.4-r0 (with transformers-0.3.0.0)
 		#      dev-haskell/transformers-0.4.2.0
 		#  then user tried to update to
 		#      dev-lang/ghc-7.8.4-r1 (with transformers-0.4.2.0)
 		#  this will lead to single .conf file collision.
 		local shipped_conf renamed_conf
 		local package_confdir="${ED}/usr/$(get_libdir)/${GHC_P}/package.conf.d"
 		for shipped_conf in "${package_confdir}"/*.conf; do
 			# rename 'pkg-ver-id.conf' to 'pkg-ver-id-gentoo-${PF}.conf'
 			renamed_conf=${shipped_conf%.conf}-gentoo-${PF}.conf
 			mv "${shipped_conf}" "${renamed_conf}" || die
 		done

 		# remove link, but leave 'haddock-${GHC_P}'
 		rm -f "${ED}"/usr/bin/haddock

 		if [[ ! -f "${S}/VERSION" ]]; then
 			echo "${GHC_PV}" > "${S}/VERSION" \
 				|| die "Could not create file ${S}/VERSION"
 		fi
 		newbashcomp "${FILESDIR}"/ghc-bash-completion ghc-pkg
 		newbashcomp utils/completion/ghc.bash         ghc
 	fi

 	# path to the package.cache
 	local package_confdir="${ED}/usr/$(get_libdir)/${GHC_P}/package.conf.d"
 	PKGCACHE="${package_confdir}"/package.cache
 	# copy the package.conf.d, including timestamp, save it so we can help
 	# users that have a broken package.conf.d
 	cp -pR "${package_confdir}"{,.initial} || die "failed to backup intial package.conf.d"

 	# copy the package.conf, including timestamp, save it so we later can put it
 	# back before uninstalling, or when upgrading.
 	cp -p "${PKGCACHE}"{,.shipped} \
 		|| die "failed to copy package.conf.d/package.cache"
 }

 pkg_preinst() {
 	# have we got an earlier version of ghc installed?
 	if has_version "<${CATEGORY}/${PF}"; then
 		haskell_updater_warn="1"
 	fi
 }

 pkg_postinst() {
 	ghc-reregister

 	# path to the package.cache
 	PKGCACHE="${EROOT}/usr/$(get_libdir)/${GHC_P}/package.conf.d/package.cache"

 	# give the cache a new timestamp, it must be as recent as
 	# the package.conf.d directory.
 	touch "${PKGCACHE}"

 	if [[ "${haskell_updater_warn}" == "1" ]]; then
 		ewarn
 		ewarn "\e[1;31m************************************************************************\e[0m"
 		ewarn
 		ewarn "You have just upgraded from an older version of GHC."
 		ewarn "You may have to run"
 		ewarn "      'haskell-updater'"
 		ewarn "to rebuild all ghc-based Haskell libraries."
 		ewarn
 		ewarn "\e[1;31m************************************************************************\e[0m"
 		ewarn
 	fi
 }

 pkg_prerm() {
 	PKGCACHE="${EROOT}/usr/$(get_libdir)/${GHC_P}/package.conf.d/package.cache"
 	rm -rf "${PKGCACHE}"

 	cp -p "${PKGCACHE}"{.shipped,}
 }

 pkg_postrm() {
 	ghc-package_pkg_postrm
 }
	# Copyright 1999-2015 Gentoo Foundation
	# Distributed under the terms of the GNU General Public License v2
	# $Id$

	EAPI=5

	# to make make a crosscompiler use crossdev and symlink ghc tree into
	# cross overlay. result would look like 'cross-sparc-unknown-linux-gnu/ghc'
	#
	# 'CTARGET' definition and 'is_crosscompile' are taken from 'toolchain.eclass'
	export CTARGET=${CTARGET:-${CHOST}}
	if [[ ${CTARGET} = ${CHOST} ]] ; then
	if [[ ${CATEGORY/cross-} != ${CATEGORY} ]] ; then
	export CTARGET=${CATEGORY/cross-}
	fi
	fi

	inherit autotools bash-completion-r1 eutils flag-o-matic ghc-package
	inherit multilib pax-utils toolchain-funcs versionator

	DESCRIPTION="The Glasgow Haskell Compiler"
	HOMEPAGE="http://www.haskell.org/ghc/"

	# we don't have any binaries yet
	arch_binaries=""

	# sorted!
	#arch_binaries="$arch_binaries alpha? ( http://code.haskell.org/~slyfox/ghc-alpha/ghc-bin-${PV}-alpha.tbz2 )"
	#arch_binaries="$arch_binaries arm? ( http://code.haskell.org/~slyfox/ghc-arm/ghc-bin-${PV}-arm.tbz2 )"
	arch_binaries="$arch_binaries amd64? ( http://code.haskell.org/~slyfox/ghc-amd64/ghc-bin-${PVR}-amd64-noncurses.tbz2 )"
	#arch_binaries="$arch_binaries ia64? ( http://code.haskell.org/~slyfox/ghc-ia64/ghc-bin-${PV}-ia64-fixed-fiw.tbz2 )"
	#arch_binaries="$arch_binaries ppc? ( http://code.haskell.org/~slyfox/ghc-ppc/ghc-bin-${PV}-ppc.tbz2 )"
	#arch_binaries="$arch_binaries ppc64? ( http://code.haskell.org/~slyfox/ghc-ppc64/ghc-bin-${PV}-ppc64.tbz2 )"
	#arch_binaries="$arch_binaries sparc? ( http://code.haskell.org/~slyfox/ghc-sparc/ghc-bin-${PV}-sparc.tbz2 )"
	arch_binaries="$arch_binaries x86? ( http://code.haskell.org/~slyfox/ghc-x86/ghc-bin-${PVR}-x86-noncurses.tbz2 )"

	# various ports:
	#arch_binaries="$arch_binaries x86-fbsd? ( http://code.haskell.org/~slyfox/ghc-x86-fbsd/ghc-bin-${PV}-x86-fbsd.tbz2 )"

	# 0 - yet
	yet_binary() {
	case "${ARCH}" in
	#alpha) return 0 ;;
	#arm)
	# ewarn "ARM binary is built on armv5tel-eabi toolchain. Use with caution."
	# return 0
	#;;
	amd64) return 0 ;;
	#ia64) return 0 ;;
	#ppc) return 0 ;;
	#ppc64) return 0 ;;
	#sparc) return 0 ;;
	x86) return 0 ;;
	*) return 1 ;;
	esac
	}

	GHC_PV=${PV}
	#GHC_PV=7.10.1.20150630 # uncomment only for -rc ebuilds
	GHC_P=${PN}-${GHC_PV} # using ${P} is almost never correct

	#SRC_URI="!binary? ( http://downloads.haskell.org/~ghc/${PV/_rc/-rc}/${GHC_P}-src.tar.bz2 )"
	# Upstream tarball was repackaged and inplace-updated. CDN cached old version for
	# many users
	SRC_URI="!binary? ( http://dev.gentoo.org/~slyfox/distfiles/${GHC_P}-src.tar.bz2 )"
	S="${WORKDIR}"/${GHC_P}

	[[ -n $arch_binaries ]] && SRC_URI+=" !ghcbootstrap? ( $arch_binaries )"

	BUMP_LIBRARIES=(
	# "hackage-name hackage-version"
	"binary 0.7.5.0"
	"hoopl 3.10.1.0"
	"transformers 0.4.3.0"
	)

	LICENSE="BSD"
	SLOT="0/${PV}"
	KEYWORDS="~amd64 ~x86 ~amd64-linux ~x86-linux"
	IUSE="doc ghcbootstrap ghcmakebinary +gmp"
	IUSE+=" binary"
	IUSE+=" elibc_glibc" # system stuff

	RDEPEND="
	>=dev-lang/perl-5.6.1
	>=dev-libs/gmp-5:=
	sys-libs/ncurses:=[unicode]
	!ghcmakebinary? ( virtual/libffi:= )
	!kernel_Darwin? ( >=sys-devel/gcc-2.95.3:* )
	kernel_linux? ( >=sys-devel/binutils-2.17:* )
	kernel_SunOS? ( >=sys-devel/binutils-2.17:* )
	"

	# force dependency on >=gmp-5, even if >=gmp-4.1 would be enough. this is due to
	# that we want the binaries to use the latest versioun available, and not to be
	# built against gmp-4

	# similar for glibc. we have bootstrapped binaries against glibc-2.17
	DEPEND="${RDEPEND}
	doc? ( app-text/docbook-xml-dtd:4.2
	app-text/docbook-xml-dtd:4.5
	app-text/docbook-xsl-stylesheets
	>=dev-libs/libxslt-1.1.2 )
	!ghcbootstrap? ( !prefix? ( elibc_glibc? ( >=sys-libs/glibc-2.17 ) ) )"

	PDEPEND="!ghcbootstrap? ( =app-admin/haskell-updater-1.2* )"

	REQUIRED_USE="?? ( ghcbootstrap binary )"

	# yeah, top-level 'use' sucks. I'd like to have it in 'src_install()'
	use binary && QA_PREBUILT="*"

	# haskell libraries built with cabal in configure mode, #515354
	QA_CONFIGURE_OPTIONS+=" --with-compiler --with-gcc"

	is_crosscompile() {
	[[ ${CHOST} != ${CTARGET} ]]
	}

	append-ghc-cflags() {
	local persistent compile assemble link
	local flag ghcflag

	for flag in $*; do
	case ${flag} in
	persistent) persistent="yes";;
	compile) compile="yes";;
	assemble) assemble="yes";;
	link) link="yes";;
	*)
	[[ ${compile} ]] && ghcflag="-optc${flag}" CFLAGS+=" ${flag}" && GHC_FLAGS+=" ${ghcflag}" &&
	[[ ${persistent} ]] && GHC_PERSISTENT_FLAGS+=" ${ghcflag}"
	[[ ${assemble} ]] && ghcflag="-opta${flag}" CFLAGS+=" ${flag}" && GHC_FLAGS+=" ${ghcflag}" &&
	[[ ${persistent} ]] && GHC_PERSISTENT_FLAGS+=" ${ghcflag}"
	[[ ${link} ]] && ghcflag="-optl${flag}" LDFLAGS+=" ${flag}" && GHC_FLAGS+=" ${ghcflag}" &&
	[[ ${persistent} ]] && GHC_PERSISTENT_FLAGS+=" ${ghcflag}"
	;;
	esac
	done
	}

	# $1 - lib name (under libraries/)
	# $2 - lib version
	# example: bump_lib "transformers" "0.4.2.0"
	bump_lib() {
	local pn=$1 pv=$2
	local p=${pn}-${pv}
	local f

	einfo "Bumping ${pn} up to ${pv}"

	for f in ghc.mk GNUmakefile; do
	mv libraries/"${pn}"/$f "${WORKDIR}"/"${p}"/$f \|\| die
	done
	mv libraries/"${pn}" "${WORKDIR}"/"${pn}".old \|\| die
	mv "${WORKDIR}"/"${p}" libraries/"${pn}" \|\| die
	}

	update_SRC_URI() {
	local p pn pv
	for p in "${BUMP_LIBRARIES[@]}"; do
	set -- $p
	pn=$1 pv=$2

	SRC_URI+=" mirror://hackage/package/${pn}/${pn}-${pv}.tar.gz"
	done
	}

	update_SRC_URI

	bump_libs() {
	local p pn pv
	for p in "${BUMP_LIBRARIES[@]}"; do
	set -- $p
	pn=$1 pv=$2

	bump_lib "${pn}" "${pv}"
	done
	}

	ghc_setup_cflags() {
	if is_crosscompile; then
	export CFLAGS=${GHC_CFLAGS-"-O2 -pipe"}
	export LDFLAGS=${GHC_LDFLAGS-"-Wl,-O1"}
	einfo "Crosscompiling mode:"
	einfo " CHOST: ${CHOST}"
	einfo " CTARGET: ${CTARGET}"
	einfo " CFLAGS: ${CFLAGS}"
	einfo " LDFLAGS: ${LDFLAGS}"
	return
	fi
	# We need to be very careful with the CFLAGS we ask ghc to pass through to
	# gcc. There are plenty of flags which will make gcc produce output that
	# breaks ghc in various ways. The main ones we want to pass through are
	# -mcpu / -march flags. These are important for arches like alpha & sparc.
	# We also use these CFLAGS for building the C parts of ghc, ie the rts.
	strip-flags
	strip-unsupported-flags

	# Cmm can't parse line numbers #482086
	replace-flags -ggdb[3-9] -ggdb2

	GHC_FLAGS=""
	GHC_PERSISTENT_FLAGS=""
	for flag in ${CFLAGS}; do
	case ${flag} in

	# Ignore extra optimisation (ghc passes -O to gcc anyway)
	# -O2 and above break on too many systems
	-O*) ;;

	# Arch and ABI flags are what we're really after
	-m*) append-ghc-cflags compile assemble ${flag};;

	# Sometimes it's handy to see backtrace of RTS
	# to get an idea what happens there
	-g*) append-ghc-cflags compile ${flag};;

	# Ignore all other flags, including all -f* flags
	esac
	done

	for flag in ${LDFLAGS}; do
	append-ghc-cflags link ${flag}
	done

	# hardened-gcc needs to be disabled, because the mangler doesn't accept
	# its output.
	gcc-specs-pie && append-ghc-cflags persistent compile link -nopie
	gcc-specs-ssp && append-ghc-cflags persistent compile -fno-stack-protector

	# prevent from failind building unregisterised ghc:
	# http://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg171602.html
	use ppc64 && append-ghc-cflags persistent compile -mminimal-toc
	# fix the similar issue as ppc64 TOC on ia64. ia64 has limited size of small data
	# currently ghc fails to build haddock
	# http://osdir.com/ml/gnu.binutils.bugs/2004-10/msg00050.html
	use ia64 && append-ghc-cflags persistent compile -G0
	}

	# substitutes string $1 to $2 in files $3 $4 ...
	relocate_path() {
	local from=$1
	local to=$2
	shift 2
	local file=
	for file in "$@"
	do
	sed -i -e "s\|$from\|$to\|g" \
	"$file" \|\| die "path relocation failed for '$file'"
	done
	}

	# changes hardcoded ghc paths and updates package index
	# $1 - new absolute root path
	relocate_ghc() {
	local to=$1

	# libdir for prebuilt binary and for current system may mismatch
	# It does for prefix installation for example: bug #476998
	local bin_ghc_prefix=${WORKDIR}/usr
	local bin_libpath=$(echo "${bin_ghc_prefix}"/lib*)
	local bin_libdir=${bin_libpath#${bin_ghc_prefix}/}

	# backup original script to use it later after relocation
	local gp_back="${T}/ghc-pkg-${GHC_PV}-orig"
	cp "${WORKDIR}/usr/bin/ghc-pkg-${GHC_PV}" "$gp_back" \|\| die "unable to backup ghc-pkg wrapper"

	if [[ ${bin_libdir} != $(get_libdir) ]]; then
	einfo "Relocating '${bin_libdir}' to '$(get_libdir)' (bug #476998)"
	# moving the dir itself is not strictly needed
	# but then USE=binary would result in installing
	# in '${bin_libdir}'
	mv "${bin_ghc_prefix}/${bin_libdir}" "${bin_ghc_prefix}/$(get_libdir)" \|\| die

	relocate_path "/usr/${bin_libdir}" "/usr/$(get_libdir)" \
	"${WORKDIR}/usr/bin/ghc-${GHC_PV}" \
	"${WORKDIR}/usr/bin/ghci-${GHC_PV}" \
	"${WORKDIR}/usr/bin/ghc-pkg-${GHC_PV}" \
	"${WORKDIR}/usr/bin/hsc2hs" \
	"${WORKDIR}/usr/bin/runghc-${GHC_PV}" \
	"$gp_back" \
	"${WORKDIR}/usr/$(get_libdir)/${GHC_P}/package.conf.d/"*
	fi

	# Relocate from /usr to ${EPREFIX}/usr
	relocate_path "/usr" "${to}/usr" \
	"${WORKDIR}/usr/bin/ghc-${GHC_PV}" \
	"${WORKDIR}/usr/bin/ghci-${GHC_PV}" \
	"${WORKDIR}/usr/bin/ghc-pkg-${GHC_PV}" \
	"${WORKDIR}/usr/bin/hsc2hs" \
	"${WORKDIR}/usr/bin/runghc-${GHC_PV}" \
	"${WORKDIR}/usr/$(get_libdir)/${GHC_P}/package.conf.d/"*

	# this one we will use to regenerate cache
	# so it should point to current tree location
	relocate_path "/usr" "${WORKDIR}/usr" "$gp_back"

	if use prefix; then
	# and insert LD_LIBRARY_PATH entry to EPREFIX dir tree
	# TODO: add the same for darwin's CHOST and it's DYLD_
	local new_ldpath='LD_LIBRARY_PATH="'${EPREFIX}/$(get_libdir):${EPREFIX}/usr/$(get_libdir)'${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}"\nexport LD_LIBRARY_PATH'
	sed -i -e '2i'"$new_ldpath" \
	"${WORKDIR}/usr/bin/ghc-${GHC_PV}" \
	"${WORKDIR}/usr/bin/ghci-${GHC_PV}" \
	"${WORKDIR}/usr/bin/ghc-pkg-${GHC_PV}" \
	"${WORKDIR}/usr/bin/hsc2hs" \
	"${WORKDIR}/usr/bin/runghc-${GHC_PV}" \
	"$gp_back" \
	"${WORKDIR}/usr/bin/hsc2hs" \
	\|\| die "Adding LD_LIBRARY_PATH for wrappers failed"
	fi

	# regenerate the binary package cache
	"$gp_back" recache \|\| die "failed to update cache after relocation"
	rm "$gp_back"
	}

	pkg_setup() {
	[[ ${MERGE_TYPE} == binary ]] && return

	if use ghcbootstrap; then
	ewarn "You requested ghc bootstrapping, this is usually only used"
	ewarn "by Gentoo developers to make binary .tbz2 packages."

	[[ -z $(type -P ghc) ]] && \
	die "Could not find a ghc to bootstrap with."
	else
	if ! yet_binary; then
	eerror "Please try emerging with USE=ghcbootstrap and report build"
	eerror "sucess or failure to the haskell team (haskell@gentoo.org)"
	die "No binary available for '${ARCH}' arch yet, USE=ghcbootstrap"
	fi
	fi
	}

	src_unpack() {
	# Create the ${S} dir if we're using the binary version
	use binary && mkdir "${S}"

	# the Solaris and Darwin binaries from ghc (maeder) need to be
	# unpacked separately, so prevent them from being unpacked
	local ONLYA=${A}
	case ${CHOST} in
	-darwin \| -solaris) ONLYA=${GHC_P}-src.tar.bz2 ;;
	esac
	unpack ${ONLYA}

	if [[ -d "${S}"/libraries/dph ]]; then
	# Sometimes dph libs get accidentally shipped with ghc
	# but they are not installed unless user requests it.
	# We never install them.
	elog "Removing 'libraries/dph'"
	rm -rf "${S}"/libraries/dph
	fi
	}

	src_prepare() {
	ghc_setup_cflags

	if ! use ghcbootstrap && [[ ${CHOST} != -darwin && ${CHOST} != -solaris ]]; then
	# Modify the wrapper script from the binary tarball to use GHC_PERSISTENT_FLAGS.
	# See bug #313635.
	sed -i -e "s\|\"\$topdir\"\|\"\$topdir\" ${GHC_PERSISTENT_FLAGS}\|" \
	"${WORKDIR}/usr/bin/ghc-${GHC_PV}"

	# allow hardened users use vanilla binary to bootstrap ghc
	# ghci uses mmap with rwx protection at it implements dynamic
	# linking on it's own (bug #299709)
	pax-mark -m "${WORKDIR}/usr/$(get_libdir)/${GHC_P}/bin/ghc"
	fi

	if use binary; then
	if use prefix; then
	relocate_ghc "${EPREFIX}"
	fi

	# Move unpacked files to the expected place
	mv "${WORKDIR}/usr" "${S}"
	else
	if ! use ghcbootstrap; then
	case ${CHOST} in
	-darwin \| -solaris)
	# UPDATE ME for ghc-7
	mkdir "${WORKDIR}"/ghc-bin-installer \|\| die
	pushd "${WORKDIR}"/ghc-bin-installer > /dev/null \|\| die
	use sparc-solaris && unpack ghc-6.10.4-sparc-sun-solaris2.tar.bz2
	use x86-solaris && unpack ghc-7.0.3-i386-unknown-solaris2.tar.bz2
	use x86-macos && unpack ghc-7.4.1-i386-apple-darwin.tar.bz2
	use x64-macos && unpack ghc-7.4.1-x86_64-apple-darwin.tar.bz2
	popd > /dev/null

	pushd "${WORKDIR}"/ghc-bin-installer/ghc-[67].?*.? > /dev/null \|\| die
	# fix the binaries so they run, on Solaris we need an
	# LD_LIBRARY_PATH which has our prefix libdirs, on
	# Darwin we need to replace the frameworks with our libs
	# from the prefix fix before installation, because some
	# of the tools are actually used during configure/make
	if [[ ${CHOST} == -solaris ]] ; then
	export LD_LIBRARY_PATH="${EPREFIX}/$(get_libdir):${EPREFIX}/usr/$(get_libdir):${LD_LIBRARY_PATH}"
	elif [[ ${CHOST} == -darwin ]] ; then
	local readline_framework=GNUreadline.framework/GNUreadline
	local gmp_framework=/opt/local/lib/libgmp.10.dylib
	local ncurses_file=/opt/local/lib/libncurses.5.dylib
	for binary in $(scanmacho -BRE MH_EXECUTE -F '%F' .) ; do
	install_name_tool -change \
	${readline_framework} \
	"${EPREFIX}"/lib/libreadline.dylib \
	${binary} \|\| die
	install_name_tool -change \
	${gmp_framework} \
	"${EPREFIX}"/usr/lib/libgmp.dylib \
	${binary} \|\| die
	install_name_tool -change \
	${ncurses_file} \
	"${EPREFIX}"/usr/lib/libncurses.dylib \
	${binary} \|\| die
	done
	# we don't do frameworks!
	sed -i \
	-e 's/\(frameworks = \)\["GMP"\]/\1[]/g' \
	-e 's/\(extraLibraries = \)\["m"\]/\1["m","gmp"]/g' \
	rts/package.conf.in \|\| die
	fi

	# it is autoconf, but we really don't want to give it too
	# much arguments, in fact we do the make in-place anyway
	./configure --prefix="${WORKDIR}"/usr \|\| die
	make install \|\| die
	popd > /dev/null
	;;
	*)
	relocate_ghc "${WORKDIR}"
	;;
	esac
	fi

	sed -i -e "s\|\"\$topdir\"\|\"\$topdir\" ${GHC_PERSISTENT_FLAGS}\|" \
	"${S}/ghc/ghc.wrapper"

	cd "${S}" # otherwise epatch will break

	epatch "${FILESDIR}"/${PN}-7.0.4-CHOST-prefix.patch

	epatch "${FILESDIR}"/${PN}-7.8.2-cgen-constify.patch
	epatch "${FILESDIR}"/${PN}-7.8.3-prim-lm.patch
	epatch "${FILESDIR}"/${PN}-7.10.1-rc3-ghc-7.10-bootstrap.patch
	epatch "${FILESDIR}"/${PN}-7.10.1-T10590-dequeue.patch
	# Since ${S}/packages does not include base, etc. add them to gen_contents_index
	sed -e 's@\(for REPO in .*\)@\1 base integer-gmp integer-gmp2 integer-simple template-haskell@' \
	-i libraries/gen_contents_index \|\| die

	if use prefix; then
	# Make configure find docbook-xsl-stylesheets from Prefix
	sed -e '/^FP_DIR_DOCBOOK_XSL/s:\[.*\]:['"${EPREFIX}"'/usr/share/sgml/docbook/xsl-stylesheets/]:' \
	-i utils/haddock/doc/configure.ac \|\| die
	fi

	bump_libs

	# as we have changed the build system
	eautoreconf
	fi
	}

	src_configure() {
	if ! use binary; then
	# initialize build.mk
	echo '# Gentoo changes' > mk/build.mk

	# Put docs into the right place, ie /usr/share/doc/ghc-${GHC_PV}
	echo "docdir = ${EPREFIX}/usr/share/doc/${P}" >> mk/build.mk
	echo "htmldir = ${EPREFIX}/usr/share/doc/${P}" >> mk/build.mk

	# We also need to use the GHC_FLAGS flags when building ghc itself
	echo "SRC_HC_OPTS+=${HCFLAGS} ${GHC_FLAGS}" >> mk/build.mk
	echo "SRC_CC_OPTS+=${CFLAGS}" >> mk/build.mk
	echo "SRC_LD_OPTS+=${LDFLAGS}" >> mk/build.mk

	# We can't depend on haddock except when bootstrapping when we
	# must build docs and include them into the binary .tbz2 package
	# app-text/dblatex is not in portage, can not build PDF or PS
	echo "BUILD_DOCBOOK_PDF = NO" >> mk/build.mk
	echo "BUILD_DOCBOOK_PS = NO" >> mk/build.mk
	if use doc; then
	echo "BUILD_DOCBOOK_HTML = YES" >> mk/build.mk
	else
	echo "BUILD_DOCBOOK_HTML = NO" >> mk/build.mk
	fi

	# this controls presence on 'xhtml' and 'haddock' in final install
	echo "HADDOCK_DOCS = YES" >> mk/build.mk

	# allows overriding build flavours for libraries:
	# v - vanilla (static libs)
	# p - profiled
	# dyn - shared libraries
	# example: GHC_LIBRARY_WAYS="v dyn"
	if [[ -n ${GHC_LIBRARY_WAYS} ]]; then
	echo "GhcLibWays=${GHC_LIBRARY_WAYS}" >> mk/build.mk
	fi

	# Get ghc from the unpacked binary .tbz2
	# except when bootstrapping we just pick ghc up off the path
	if ! use ghcbootstrap; then
	export PATH="${WORKDIR}/usr/bin:${PATH}"
	fi

	if use gmp; then
	echo "INTEGER_LIBRARY=integer-gmp2" >> mk/build.mk
	else
	echo "INTEGER_LIBRARY=integer-simple" >> mk/build.mk
	fi

	# don't strip anything. Very useful when stage2 SIGSEGVs on you
	echo "STRIP_CMD = :" >> mk/build.mk

	local econf_args=()

	# GHC embeds 'gcc' it was built by and uses it later.
	# Don't allow things like ccache or versioned binary slip.
	# We use stable thing across gcc upgrades.
	is_crosscompile \|\| econf_args+=(--with-gcc=${CHOST}-gcc)

	if use ghcmakebinary; then
	# When building booting libary we are trying to
	# bundle or restrict most of external depends
	# with unstable ABI:
	# - embed libffi (default GHC behaviour)
	# - disable ncurses support for ghci (via haskeline)
	# https://bugs.gentoo.org/557478
	# - disable ncurses support for ghc-pkg
	echo "libraries/haskeline_CONFIGURE_OPTS += --flag=-terminfo" >> mk/build.mk
	echo "utils/ghc-pkg_HC_OPTS += -DBOOTSTRAPPING" >> mk/build.mk
	else
	econf_args+=(--with-system-libffi)
	econf_args+=(--with-ffi-includes=$(pkg-config libffi --cflags-only-I \| sed -e 's@^-I@@'))
	fi

	elog "Final mk/build.mk:"
	cat mk/build.mk \|\| die

	econf ${econf_args[@]} --enable-bootstrap-with-devel-snapshot

	if [[ ${PV} == 9999 ]]; then
	GHC_PV="$(grep 'S\[\"PACKAGE_VERSION\"\]' config.status \| sed -e 's@^.=\"\(.\)\"@\1@')"
	GHC_P=${PN}-${GHC_PV}
	fi
	GHC_TPF="$(grep 'S\[\"TargetPlatformFull\"\]' config.status \| sed -e 's@^.=\"\(.\)\"@\1@')"
	fi # ! use binary
	}

	src_compile() {
	if ! use binary; then
	# 1. build compiler binary first
	emake ghc/stage2/build/tmp/ghc-stage2
	# 2. pax-mark (bug #516430)
	pax-mark -m ghc/stage2/build/tmp/ghc-stage2
	# 3. and then all the rest
	emake all
	fi # ! use binary
	}

	src_install() {
	if use binary; then
	use prefix && mkdir -p "${ED}"
	mv "${S}/usr" "${ED}"
	else

	emake -j1 install DESTDIR="${D}"
	dodoc "distrib/README" "ANNOUNCE" "LICENSE" "VERSION"

	# rename ghc-shipped files to avoid collision
	# of external packages. Motivating example:
	# user had installed:
	# dev-lang/ghc-7.8.4-r0 (with transformers-0.3.0.0)
	# dev-haskell/transformers-0.4.2.0
	# then user tried to update to
	# dev-lang/ghc-7.8.4-r1 (with transformers-0.4.2.0)
	# this will lead to single .conf file collision.
	local shipped_conf renamed_conf
	local package_confdir="${ED}/usr/$(get_libdir)/${GHC_P}/package.conf.d"
	for shipped_conf in "${package_confdir}"/*.conf; do
	# rename 'pkg-ver-id.conf' to 'pkg-ver-id-gentoo-${PF}.conf'
	renamed_conf=${shipped_conf%.conf}-gentoo-${PF}.conf
	mv "${shipped_conf}" "${renamed_conf}" \|\| die
	done

	# remove link, but leave 'haddock-${GHC_P}'
	rm -f "${ED}"/usr/bin/haddock

	if [[ ! -f "${S}/VERSION" ]]; then
	echo "${GHC_PV}" > "${S}/VERSION" \
	\|\| die "Could not create file ${S}/VERSION"
	fi
	newbashcomp "${FILESDIR}"/ghc-bash-completion ghc-pkg
	newbashcomp utils/completion/ghc.bash ghc
	fi

	# path to the package.cache
	local package_confdir="${ED}/usr/$(get_libdir)/${GHC_P}/package.conf.d"
	PKGCACHE="${package_confdir}"/package.cache
	# copy the package.conf.d, including timestamp, save it so we can help
	# users that have a broken package.conf.d
	cp -pR "${package_confdir}"{,.initial} \|\| die "failed to backup intial package.conf.d"

	# copy the package.conf, including timestamp, save it so we later can put it
	# back before uninstalling, or when upgrading.
	cp -p "${PKGCACHE}"{,.shipped} \
	\|\| die "failed to copy package.conf.d/package.cache"
	}

	pkg_preinst() {
	# have we got an earlier version of ghc installed?
	if has_version "<${CATEGORY}/${PF}"; then
	haskell_updater_warn="1"
	fi
	}

	pkg_postinst() {
	ghc-reregister

	# path to the package.cache
	PKGCACHE="${EROOT}/usr/$(get_libdir)/${GHC_P}/package.conf.d/package.cache"

	# give the cache a new timestamp, it must be as recent as
	# the package.conf.d directory.
	touch "${PKGCACHE}"

	if [[ "${haskell_updater_warn}" == "1" ]]; then
	ewarn
	ewarn "\e[1;31m************************************************************************\e[0m"
	ewarn
	ewarn "You have just upgraded from an older version of GHC."
	ewarn "You may have to run"
	ewarn " 'haskell-updater'"
	ewarn "to rebuild all ghc-based Haskell libraries."
	ewarn
	ewarn "\e[1;31m************************************************************************\e[0m"
	ewarn
	fi
	}

	pkg_prerm() {
	PKGCACHE="${EROOT}/usr/$(get_libdir)/${GHC_P}/package.conf.d/package.cache"
	rm -rf "${PKGCACHE}"

	cp -p "${PKGCACHE}"{.shipped,}
	}

	pkg_postrm() {
	ghc-package_pkg_postrm
	}