blob: 046dd9aa794d05d8ff3b8b31d9b67c91a10a9cb2 [file] [log] [blame]
/* flexdef - definitions file for flex */
/* Copyright (c) 1990 The Regents of the University of California. */
/* All rights reserved. */
/* This code is derived from software contributed to Berkeley by */
/* Vern Paxson. */
/* The United States Government has rights in this work pursuant */
/* to contract no. DE-AC03-76SF00098 between the United States */
/* Department of Energy and the University of California. */
/* This file is part of flex. */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* 1. Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* 2. Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* Neither the name of the University nor the names of its contributors */
/* may be used to endorse or promote products derived from this software */
/* without specific prior written permission. */
/* PURPOSE. */
#ifndef FLEXDEF_H
#define FLEXDEF_H 1
#include <config.h>
/* AIX requires this to be the first thing in the file. */
#ifndef __GNUC__
# include <alloca.h>
# else
# ifdef _AIX
#pragma alloca
# else
# ifndef alloca /* predefined by HP cc +Olibcalls */
char *alloca ();
# endif
# endif
# endif
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <setjmp.h>
#include <ctype.h>
#include <string.h>
#include <math.h>
#include <assert.h>
#define assert(Pred)
#include <limits.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/params.h>
#include <sys/wait.h>
#include <stdbool.h>
#define bool int
#define true 1
#define false 0
#include <regex.h>
#include "flexint.h"
/* We use gettext. So, when we write strings which should be translated, we mark them with _() */
#include <locale.h>
#endif /* HAVE_LOCALE_H */
#include "gettext.h"
#define _(String) gettext (String)
#define _(STRING) STRING
#endif /* ENABLE_NLS */
/* Always be prepared to generate an 8-bit scanner. */
#define CSIZE 256
#define Char unsigned char
/* Size of input alphabet - should be size of ASCII set. */
#define DEFAULT_CSIZE 128
#ifndef PROTO
#if defined(__STDC__)
#define PROTO(proto) proto
#define PROTO(proto) ()
#ifdef VMS
#ifndef __VMS_POSIX
#define unlink remove
#ifdef MS_DOS
/* Maximum line length we'll have to deal with. */
#define MAXLINE 2048
#ifndef MIN
#define MIN(x,y) ((x) < (y) ? (x) : (y))
#ifndef MAX
#define MAX(x,y) ((x) > (y) ? (x) : (y))
#ifndef ABS
#define ABS(x) ((x) < 0 ? -(x) : (x))
/* ANSI C does not guarantee that isascii() is defined */
#ifndef isascii
#define isascii(c) ((c) <= 0177)
#define unspecified -1
/* Special chk[] values marking the slots taking by end-of-buffer and action
* numbers.
#define EOB_POSITION -1
/* Number of data items per line for -f output. */
/* Number of lines of data in -f output before inserting a blank line for
* readability.
/* transition_struct_out() definitions. */
/* Returns true if an nfa state has an epsilon out-transition slot
* that can be used. This definition is currently not used.
#define FREE_EPSILON(state) \
(transchar[state] == SYM_EPSILON && \
trans2[state] == NO_TRANSITION && \
finalst[state] != state)
/* Returns true if an nfa state has an epsilon out-transition character
* and both slots are free
#define SUPER_FREE_EPSILON(state) \
(transchar[state] == SYM_EPSILON && \
trans1[state] == NO_TRANSITION) \
/* Maximum number of NFA states that can comprise a DFA state. It's real
* big because if there's a lot of rules, the initial state will have a
* huge epsilon closure.
/* A note on the following masks. They are used to mark accepting numbers
* as being special. As such, they implicitly limit the number of accepting
* numbers (i.e., rules) because if there are too many rules the rule numbers
* will overload the mask bits. Fortunately, this limit is \large/ (0x2000 ==
* 8192) so unlikely to actually cause any problems. A check is made in
* new_rule() to ensure that this limit is not reached.
/* Mask to mark a trailing context accepting number. */
#define YY_TRAILING_MASK 0x2000
/* Mask to mark the accepting number of the "head" of a trailing context
* rule.
#define YY_TRAILING_HEAD_MASK 0x4000
/* Maximum number of rules, as outlined in the above note. */
/* NIL must be 0. If not, its special meaning when making equivalence classes
* (it marks the representative of a given e.c.) will be unidentifiable.
#define NIL 0
#define JAM -1 /* to mark a missing DFA transition */
#define UNIQUE -1 /* marks a symbol as an e.c. representative */
#define INFINITE_REPEAT -1 /* for x{5,} constructions */
#define INITIAL_MAX_CCLS 100 /* max number of unique character classes */
/* Size of table holding members of character classes. */
#define INITIAL_MAX_RULES 100 /* default maximum number of rules */
#define INITIAL_MNS 2000 /* default maximum number of nfa states */
#define MNS_INCREMENT 1000 /* amount to bump above by if it's not enough */
#define INITIAL_MAX_DFAS 1000 /* default maximum number of dfa states */
#define JAMSTATE -32766 /* marks a reference to the state that always jams */
/* Maximum number of NFA states. */
#define MAXIMUM_MNS 31999
#define MAXIMUM_MNS_LONG 1999999999
/* Enough so that if it's subtracted from an NFA state number, the result
* is guaranteed to be negative.
#define MARKER_DIFFERENCE (maximum_mns+2)
/* Maximum number of nxt/chk pairs for non-templates. */
/* Maximum number of nxt/chk pairs needed for templates. */
#define SYM_EPSILON (CSIZE + 1) /* to mark transitions on the symbol epsilon */
#define INITIAL_MAX_SCS 40 /* maximum number of start conditions */
#define MAX_SCS_INCREMENT 40 /* amount to bump by if it's not enough */
#define ONE_STACK_SIZE 500 /* stack of states with only one out-transition */
#define SAME_TRANS -1 /* transition is the same as "default" entry for state */
/* The following percentages are used to tune table compression:
* The percentage the number of out-transitions a state must be of the
* number of equivalence classes in order to be considered for table
* compaction by using protos.
/* The percentage the number of homogeneous out-transitions of a state
* must be of the number of total out-transitions of the state in order
* that the state's transition table is first compared with a potential
* template of the most common out-transition instead of with the first
* proto in the proto queue.
/* The percentage the number of differences between a state's transition
* table and the proto it was first compared with must be of the total
* number of out-transitions of the state in order to keep the first
* proto as a good match and not search any further.
/* The percentage the number of differences between a state's transition
* table and the most similar proto must be of the state's total number
* of out-transitions to use the proto as an acceptable close match.
/* The percentage the number of homogeneous out-transitions of a state
* must be of the number of total out-transitions of the state in order
* to consider making a template from the state.
/* The percentage the number of differences between a state's transition
* table and the most similar proto must be of the state's total number
* of out-transitions to create a new proto from the state.
/* The percentage the total number of out-transitions of a state must be
* of the number of equivalence classes in order to consider trying to
* fit the transition table into "holes" inside the nxt/chk table.
/* Size of region set aside to cache the complete transition table of
* protos on the proto queue to enable quick comparisons.
#define PROT_SAVE_SIZE 2000
#define MSP 50 /* maximum number of saved protos (protos on the proto queue) */
/* Maximum number of out-transitions a state can have that we'll rummage
* around through the interior of the internal fast table looking for a
* spot for it.
/* Maximum number of rules which will be reported as being associated
* with a DFA state.
#define MAX_ASSOC_RULES 100
/* Number that, if used to subscript an array, has a good chance of producing
* an error; should be small enough to fit into a short.
#define BAD_SUBSCRIPT -32767
/* Absolute value of largest number that can be stored in a short, with a
* bit of slop thrown in for general paranoia.
#define MAX_SHORT 32700
/* Declarations for global variables. */
/* Variables for flags:
* printstats - if true (-v), dump statistics
* syntaxerror - true if a syntax error has been found
* eofseen - true if we've seen an eof in the input file
* ddebug - if true (-d), make a "debug" scanner
* trace - if true (-T), trace processing
* nowarn - if true (-w), do not generate warnings
* spprdflt - if true (-s), suppress the default rule
* interactive - if true (-I), generate an interactive scanner
* lex_compat - if true (-l), maximize compatibility with AT&T lex
* posix_compat - if true (-X), maximize compatibility with POSIX lex
* do_yylineno - if true, generate code to maintain yylineno
* useecs - if true (-Ce flag), use equivalence classes
* fulltbl - if true (-Cf flag), don't compress the DFA state table
* usemecs - if true (-Cm flag), use meta-equivalence classes
* fullspd - if true (-F flag), use Jacobson method of table representation
* gen_line_dirs - if true (i.e., no -L flag), generate #line directives
* performance_report - if > 0 (i.e., -p flag), generate a report relating
* to scanner performance; if > 1 (-p -p), report on minor performance
* problems, too
* backing_up_report - if true (i.e., -b flag), generate "lex.backup" file
* listing backing-up states
* C_plus_plus - if true (i.e., -+ flag), generate a C++ scanner class;
* otherwise, a standard C scanner
* reentrant - if true (-R), generate a reentrant C scanner.
* bison_bridge_lval - if true (--bison-bridge), bison pure calling convention.
* bison_bridge_lloc - if true (--bison-locations), bison yylloc.
* long_align - if true (-Ca flag), favor long-word alignment.
* use_read - if true (-f, -F, or -Cr) then use read() for scanner input;
* otherwise, use fread().
* yytext_is_array - if true (i.e., %array directive), then declare
* yytext as a array instead of a character pointer. Nice and inefficient.
* do_yywrap - do yywrap() processing on EOF. If false, EOF treated as
* "no more files".
* csize - size of character set for the scanner we're generating;
* 128 for 7-bit chars and 256 for 8-bit
* yymore_used - if true, yymore() is used in input rules
* reject - if true, generate back-up tables for REJECT macro
* real_reject - if true, scanner really uses REJECT (as opposed to just
* having "reject" set for variable trailing context)
* continued_action - true if this rule's action is to "fall through" to
* the next rule's action (i.e., the '|' action)
* in_rule - true if we're inside an individual rule, false if not.
* yymore_really_used - whether to treat yymore() as really used, regardless
* of what we think based on references to it in the user's actions.
* reject_really_used - same for REJECT
extern int printstats, syntaxerror, eofseen, ddebug, trace, nowarn,
extern int interactive, lex_compat, posix_compat, do_yylineno;
extern int useecs, fulltbl, usemecs, fullspd;
extern int gen_line_dirs, performance_report, backing_up_report;
extern int reentrant, bison_bridge_lval, bison_bridge_lloc;
extern bool ansi_func_defs, ansi_func_protos;
extern int C_plus_plus, long_align, use_read, yytext_is_array, do_yywrap;
extern int csize;
extern int yymore_used, reject, real_reject, continued_action, in_rule;
extern int yymore_really_used, reject_really_used;
/* Variables used in the flex input routines:
* datapos - characters on current output line
* dataline - number of contiguous lines of data in current data
* statement. Used to generate readable -f output
* linenum - current input line number
* skelfile - the skeleton file
* skel - compiled-in skeleton array
* skel_ind - index into "skel" array, if skelfile is nil
* yyin - input file
* backing_up_file - file to summarize backing-up states to
* infilename - name of input file
* outfilename - name of output file
* headerfilename - name of the .h file to generate
* did_outfilename - whether outfilename was explicitly set
* prefix - the prefix used for externally visible names ("yy" by default)
* yyclass - yyFlexLexer subclass to use for YY_DECL
* do_stdinit - whether to initialize yyin/yyout to stdin/stdout
* use_stdout - the -t flag
* input_files - array holding names of input files
* num_input_files - size of input_files array
* program_name - name with which program was invoked
* action_array - array to hold the rule actions
* action_size - size of action_array
* defs1_offset - index where the user's section 1 definitions start
* in action_array
* prolog_offset - index where the prolog starts in action_array
* action_offset - index where the non-prolog starts in action_array
* action_index - index where the next action should go, with respect
* to "action_array"
extern int datapos, dataline, linenum;
extern FILE *skelfile, *yyin, *backing_up_file;
extern const char *skel[];
extern int skel_ind;
extern char *infilename, *outfilename, *headerfilename;
extern int did_outfilename;
extern char *prefix, *yyclass, *extra_type;
extern int do_stdinit, use_stdout;
extern char **input_files;
extern int num_input_files;
extern char *program_name;
extern char *action_array;
extern int action_size;
extern int defs1_offset, prolog_offset, action_offset, action_index;
/* Variables for stack of states having only one out-transition:
* onestate - state number
* onesym - transition symbol
* onenext - target state
* onedef - default base entry
* onesp - stack pointer
extern int onestate[ONE_STACK_SIZE], onesym[ONE_STACK_SIZE];
extern int onenext[ONE_STACK_SIZE], onedef[ONE_STACK_SIZE], onesp;
/* Variables for nfa machine data:
* maximum_mns - maximal number of NFA states supported by tables
* current_mns - current maximum on number of NFA states
* num_rules - number of the last accepting state; also is number of
* rules created so far
* num_eof_rules - number of <<EOF>> rules
* default_rule - number of the default rule
* current_max_rules - current maximum number of rules
* lastnfa - last nfa state number created
* firstst - physically the first state of a fragment
* lastst - last physical state of fragment
* finalst - last logical state of fragment
* transchar - transition character
* trans1 - transition state
* trans2 - 2nd transition state for epsilons
* accptnum - accepting number
* assoc_rule - rule associated with this NFA state (or 0 if none)
* state_type - a STATE_xxx type identifying whether the state is part
* of a normal rule, the leading state in a trailing context
* rule (i.e., the state which marks the transition from
* recognizing the text-to-be-matched to the beginning of
* the trailing context), or a subsequent state in a trailing
* context rule
* rule_type - a RULE_xxx type identifying whether this a ho-hum
* normal rule or one which has variable head & trailing
* context
* rule_linenum - line number associated with rule
* rule_useful - true if we've determined that the rule can be matched
* rule_has_nl - true if rule could possibly match a newline
* ccl_has_nl - true if current ccl could match a newline
* nlch - default eol char
extern int maximum_mns, current_mns, current_max_rules;
extern int num_rules, num_eof_rules, default_rule, lastnfa;
extern int *firstst, *lastst, *finalst, *transchar, *trans1, *trans2;
extern int *accptnum, *assoc_rule, *state_type;
extern int *rule_type, *rule_linenum, *rule_useful;
extern bool *rule_has_nl, *ccl_has_nl;
extern int nlch;
/* Different types of states; values are useful as masks, as well, for
* routines like check_trailing_context().
#define STATE_NORMAL 0x1
/* Global holding current type of state we're making. */
extern int current_state_type;
/* Different types of rules. */
#define RULE_NORMAL 0
/* True if the input rules include a rule with both variable-length head
* and trailing context, false otherwise.
extern int variable_trailing_context_rules;
/* Variables for protos:
* numtemps - number of templates created
* numprots - number of protos created
* protprev - backlink to a more-recently used proto
* protnext - forward link to a less-recently used proto
* prottbl - base/def table entry for proto
* protcomst - common state of proto
* firstprot - number of the most recently used proto
* lastprot - number of the least recently used proto
* protsave contains the entire state array for protos
extern int numtemps, numprots, protprev[MSP], protnext[MSP], prottbl[MSP];
extern int protcomst[MSP], firstprot, lastprot, protsave[PROT_SAVE_SIZE];
/* Variables for managing equivalence classes:
* numecs - number of equivalence classes
* nextecm - forward link of Equivalence Class members
* ecgroup - class number or backward link of EC members
* nummecs - number of meta-equivalence classes (used to compress
* templates)
* tecfwd - forward link of meta-equivalence classes members
* tecbck - backward link of MEC's
/* Reserve enough room in the equivalence class arrays so that we
* can use the CSIZE'th element to hold equivalence class information
* for the NUL character. Later we'll move this information into
* the 0th element.
extern int numecs, nextecm[CSIZE + 1], ecgroup[CSIZE + 1], nummecs;
/* Meta-equivalence classes are indexed starting at 1, so it's possible
* that they will require positions from 1 .. CSIZE, i.e., CSIZE + 1
* slots total (since the arrays are 0-based). nextecm[] and ecgroup[]
* don't require the extra position since they're indexed from 1 .. CSIZE - 1.
extern int tecfwd[CSIZE + 1], tecbck[CSIZE + 1];
/* Variables for start conditions:
* lastsc - last start condition created
* current_max_scs - current limit on number of start conditions
* scset - set of rules active in start condition
* scbol - set of rules active only at the beginning of line in a s.c.
* scxclu - true if start condition is exclusive
* sceof - true if start condition has EOF rule
* scname - start condition name
extern int lastsc, *scset, *scbol, *scxclu, *sceof;
extern int current_max_scs;
extern char **scname;
/* Variables for dfa machine data:
* current_max_dfa_size - current maximum number of NFA states in DFA
* current_max_xpairs - current maximum number of non-template xtion pairs
* current_max_template_xpairs - current maximum number of template pairs
* current_max_dfas - current maximum number DFA states
* lastdfa - last dfa state number created
* nxt - state to enter upon reading character
* chk - check value to see if "nxt" applies
* tnxt - internal nxt table for templates
* base - offset into "nxt" for given state
* def - where to go if "chk" disallows "nxt" entry
* nultrans - NUL transition for each state
* NUL_ec - equivalence class of the NUL character
* tblend - last "nxt/chk" table entry being used
* firstfree - first empty entry in "nxt/chk" table
* dss - nfa state set for each dfa
* dfasiz - size of nfa state set for each dfa
* dfaacc - accepting set for each dfa state (if using REJECT), or accepting
* number, if not
* accsiz - size of accepting set for each dfa state
* dhash - dfa state hash value
* numas - number of DFA accepting states created; note that this
* is not necessarily the same value as num_rules, which is the analogous
* value for the NFA
* numsnpairs - number of state/nextstate transition pairs
* jambase - position in base/def where the default jam table starts
* jamstate - state number corresponding to "jam" state
* end_of_buffer_state - end-of-buffer dfa state number
extern int current_max_dfa_size, current_max_xpairs;
extern int current_max_template_xpairs, current_max_dfas;
extern int lastdfa, *nxt, *chk, *tnxt;
extern int *base, *def, *nultrans, NUL_ec, tblend, firstfree, **dss,
extern union dfaacc_union {
int *dfaacc_set;
int dfaacc_state;
} *dfaacc;
extern int *accsiz, *dhash, numas;
extern int numsnpairs, jambase, jamstate;
extern int end_of_buffer_state;
/* Variables for ccl information:
* lastccl - ccl index of the last created ccl
* current_maxccls - current limit on the maximum number of unique ccl's
* cclmap - maps a ccl index to its set pointer
* ccllen - gives the length of a ccl
* cclng - true for a given ccl if the ccl is negated
* cclreuse - counts how many times a ccl is re-used
* current_max_ccl_tbl_size - current limit on number of characters needed
* to represent the unique ccl's
* ccltbl - holds the characters in each ccl - indexed by cclmap
extern int lastccl, *cclmap, *ccllen, *cclng, cclreuse;
extern int current_maxccls, current_max_ccl_tbl_size;
extern Char *ccltbl;
/* Variables for miscellaneous information:
* nmstr - last NAME scanned by the scanner
* sectnum - section number currently being parsed
* nummt - number of empty nxt/chk table entries
* hshcol - number of hash collisions detected by snstods
* dfaeql - number of times a newly created dfa was equal to an old one
* numeps - number of epsilon NFA states created
* eps2 - number of epsilon states which have 2 out-transitions
* num_reallocs - number of times it was necessary to realloc() a group
* of arrays
* tmpuses - number of DFA states that chain to templates
* totnst - total number of NFA states used to make DFA states
* peakpairs - peak number of transition pairs we had to store internally
* numuniq - number of unique transitions
* numdup - number of duplicate transitions
* hshsave - number of hash collisions saved by checking number of states
* num_backing_up - number of DFA states requiring backing up
* bol_needed - whether scanner needs beginning-of-line recognition
extern char nmstr[MAXLINE];
extern int sectnum, nummt, hshcol, dfaeql, numeps, eps2, num_reallocs;
extern int tmpuses, totnst, peakpairs, numuniq, numdup, hshsave;
extern int num_backing_up, bol_needed;
void *allocate_array PROTO ((int, size_t));
void *reallocate_array PROTO ((void *, int, size_t));
void *flex_alloc PROTO ((size_t));
void *flex_realloc PROTO ((void *, size_t));
void flex_free PROTO ((void *));
#define allocate_integer_array(size) \
(int *) allocate_array( size, sizeof( int ) )
#define reallocate_integer_array(array,size) \
(int *) reallocate_array( (void *) array, size, sizeof( int ) )
#define allocate_bool_array(size) \
(bool *) allocate_array( size, sizeof( bool ) )
#define reallocate_bool_array(array,size) \
(bool *) reallocate_array( (void *) array, size, sizeof( bool ) )
#define allocate_int_ptr_array(size) \
(int **) allocate_array( size, sizeof( int * ) )
#define allocate_char_ptr_array(size) \
(char **) allocate_array( size, sizeof( char * ) )
#define allocate_dfaacc_union(size) \
(union dfaacc_union *) \
allocate_array( size, sizeof( union dfaacc_union ) )
#define reallocate_int_ptr_array(array,size) \
(int **) reallocate_array( (void *) array, size, sizeof( int * ) )
#define reallocate_char_ptr_array(array,size) \
(char **) reallocate_array( (void *) array, size, sizeof( char * ) )
#define reallocate_dfaacc_union(array, size) \
(union dfaacc_union *) \
reallocate_array( (void *) array, size, sizeof( union dfaacc_union ) )
#define allocate_character_array(size) \
(char *) allocate_array( size, sizeof( char ) )
#define reallocate_character_array(array,size) \
(char *) reallocate_array( (void *) array, size, sizeof( char ) )
#define allocate_Character_array(size) \
(Char *) allocate_array( size, sizeof( Char ) )
#define reallocate_Character_array(array,size) \
(Char *) reallocate_array( (void *) array, size, sizeof( Char ) )
/* Used to communicate between scanner and parser. The type should really
* be YYSTYPE, but we can't easily get our hands on it.
extern int yylval;
/* External functions that are cross-referenced among the flex source files. */
/* from file ccl.c */
extern void ccladd PROTO ((int, int)); /* add a single character to a ccl */
extern int cclinit PROTO ((void)); /* make an empty ccl */
extern void cclnegate PROTO ((int)); /* negate a ccl */
extern int ccl_set_diff (int a, int b); /* set difference of two ccls. */
extern int ccl_set_union (int a, int b); /* set union of two ccls. */
/* List the members of a set of characters in CCL form. */
extern void list_character_set PROTO ((FILE *, int[]));
/* from file dfa.c */
/* Check a DFA state for backing up. */
extern void check_for_backing_up PROTO ((int, int[]));
/* Check to see if NFA state set constitutes "dangerous" trailing context. */
extern void check_trailing_context PROTO ((int *, int, int *, int));
/* Construct the epsilon closure of a set of ndfa states. */
extern int *epsclosure PROTO ((int *, int *, int[], int *, int *));
/* Increase the maximum number of dfas. */
extern void increase_max_dfas PROTO ((void));
extern void ntod PROTO ((void)); /* convert a ndfa to a dfa */
/* Converts a set of ndfa states into a dfa state. */
extern int snstods PROTO ((int[], int, int[], int, int, int *));
/* from file ecs.c */
/* Convert character classes to set of equivalence classes. */
extern void ccl2ecl PROTO ((void));
/* Associate equivalence class numbers with class members. */
extern int cre8ecs PROTO ((int[], int[], int));
/* Update equivalence classes based on character class transitions. */
extern void mkeccl PROTO ((Char[], int, int[], int[], int, int));
/* Create equivalence class for single character. */
extern void mkechar PROTO ((int, int[], int[]));
/* from file gen.c */
extern void do_indent PROTO ((void)); /* indent to the current level */
/* Generate the code to keep backing-up information. */
extern void gen_backing_up PROTO ((void));
/* Generate the code to perform the backing up. */
extern void gen_bu_action PROTO ((void));
/* Generate full speed compressed transition table. */
extern void genctbl PROTO ((void));
/* Generate the code to find the action number. */
extern void gen_find_action PROTO ((void));
extern void genftbl PROTO ((void)); /* generate full transition table */
/* Generate the code to find the next compressed-table state. */
extern void gen_next_compressed_state PROTO ((char *));
/* Generate the code to find the next match. */
extern void gen_next_match PROTO ((void));
/* Generate the code to find the next state. */
extern void gen_next_state PROTO ((int));
/* Generate the code to make a NUL transition. */
extern void gen_NUL_trans PROTO ((void));
/* Generate the code to find the start state. */
extern void gen_start_state PROTO ((void));
/* Generate data statements for the transition tables. */
extern void gentabs PROTO ((void));
/* Write out a formatted string at the current indentation level. */
extern void indent_put2s PROTO ((const char *, const char *));
/* Write out a string + newline at the current indentation level. */
extern void indent_puts PROTO ((const char *));
extern void make_tables PROTO ((void)); /* generate transition tables */
/* from file main.c */
extern void check_options PROTO ((void));
extern void flexend PROTO ((int));
extern void usage PROTO ((void));
/* from file misc.c */
/* Add a #define to the action file. */
extern void action_define PROTO ((const char *defname, int value));
/* Add the given text to the stored actions. */
extern void add_action PROTO ((const char *new_text));
/* True if a string is all lower case. */
extern int all_lower PROTO ((register char *));
/* True if a string is all upper case. */
extern int all_upper PROTO ((register char *));
/* Compare two integers for use by qsort. */
extern int intcmp PROTO ((const void *, const void *));
/* Check a character to make sure it's in the expected range. */
extern void check_char PROTO ((int c));
/* Replace upper-case letter to lower-case. */
extern Char clower PROTO ((int));
/* Returns a dynamically allocated copy of a string. */
extern char *copy_string PROTO ((register const char *));
/* Returns a dynamically allocated copy of a (potentially) unsigned string. */
extern Char *copy_unsigned_string PROTO ((register Char *));
/* Compare two characters for use by qsort with '\0' sorting last. */
extern int cclcmp PROTO ((const void *, const void *));
/* Finish up a block of data declarations. */
extern void dataend PROTO ((void));
/* Flush generated data statements. */
extern void dataflush PROTO ((void));
/* Report an error message and terminate. */
extern void flexerror PROTO ((const char *));
/* Report a fatal error message and terminate. */
extern void flexfatal PROTO ((const char *));
/* Report a fatal error with a pinpoint, and terminate */
#define flex_die(msg) \
do{ \
fprintf (stderr,\
_("%s: fatal internal error at %s:%d (%s): %s\n"),\
program_name, __FILE__, (int)__LINE__,\
#else /* ! HAVE_DECL___FUNC__ */
#define flex_die(msg) \
do{ \
fprintf (stderr,\
_("%s: fatal internal error at %s:%d %s\n"),\
program_name, __FILE__, (int)__LINE__,\
#endif /* ! HAVE_DECL___func__ */
/* Convert a hexadecimal digit string to an integer value. */
extern int htoi PROTO ((Char[]));
/* Report an error message formatted with one integer argument. */
extern void lerrif PROTO ((const char *, int));
/* Report an error message formatted with one string argument. */
extern void lerrsf PROTO ((const char *, const char *));
/* Like lerrsf, but also exit after displaying message. */
extern void lerrsf_fatal PROTO ((const char *, const char *));
/* Spit out a "#line" statement. */
extern void line_directive_out PROTO ((FILE *, int));
/* Mark the current position in the action array as the end of the section 1
* user defs.
extern void mark_defs1 PROTO ((void));
/* Mark the current position in the action array as the end of the prolog. */
extern void mark_prolog PROTO ((void));
/* Generate a data statment for a two-dimensional array. */
extern void mk2data PROTO ((int));
extern void mkdata PROTO ((int)); /* generate a data statement */
/* Return the integer represented by a string of digits. */
extern int myctoi PROTO ((const char *));
/* Return character corresponding to escape sequence. */
extern Char myesc PROTO ((Char[]));
/* Convert an octal digit string to an integer value. */
extern int otoi PROTO ((Char[]));
/* Output a (possibly-formatted) string to the generated scanner. */
extern void out PROTO ((const char *));
extern void out_dec PROTO ((const char *, int));
extern void out_dec2 PROTO ((const char *, int, int));
extern void out_hex PROTO ((const char *, unsigned int));
extern void out_str PROTO ((const char *, const char *));
extern void out_str3
PROTO ((const char *, const char *, const char *, const char *));
extern void out_str_dec PROTO ((const char *, const char *, int));
extern void outc PROTO ((int));
extern void outn PROTO ((const char *));
extern void out_m4_define (const char* def, const char* val);
/* Return a printable version of the given character, which might be
* 8-bit.
extern char *readable_form PROTO ((int));
/* Write out one section of the skeleton file. */
extern void skelout PROTO ((void));
/* Output a yy_trans_info structure. */
extern void transition_struct_out PROTO ((int, int));
/* Only needed when using certain broken versions of bison to build parse.c. */
extern void *yy_flex_xmalloc PROTO ((int));
/* Set a region of memory to 0. */
extern void zero_out PROTO ((char *, size_t));
/* from file nfa.c */
/* Add an accepting state to a machine. */
extern void add_accept PROTO ((int, int));
/* Make a given number of copies of a singleton machine. */
extern int copysingl PROTO ((int, int));
/* Debugging routine to write out an nfa. */
extern void dumpnfa PROTO ((int));
/* Finish up the processing for a rule. */
extern void finish_rule PROTO ((int, int, int, int, int));
/* Connect two machines together. */
extern int link_machines PROTO ((int, int));
/* Mark each "beginning" state in a machine as being a "normal" (i.e.,
* not trailing context associated) state.
extern void mark_beginning_as_normal PROTO ((register int));
/* Make a machine that branches to two machines. */
extern int mkbranch PROTO ((int, int));
extern int mkclos PROTO ((int)); /* convert a machine into a closure */
extern int mkopt PROTO ((int)); /* make a machine optional */
/* Make a machine that matches either one of two machines. */
extern int mkor PROTO ((int, int));
/* Convert a machine into a positive closure. */
extern int mkposcl PROTO ((int));
extern int mkrep PROTO ((int, int, int)); /* make a replicated machine */
/* Create a state with a transition on a given symbol. */
extern int mkstate PROTO ((int));
extern void new_rule PROTO ((void)); /* initialize for a new rule */
/* from file parse.y */
/* Build the "<<EOF>>" action for the active start conditions. */
extern void build_eof_action PROTO ((void));
/* Write out a message formatted with one string, pinpointing its location. */
extern void format_pinpoint_message PROTO ((const char *, const char *));
/* Write out a message, pinpointing its location. */
extern void pinpoint_message PROTO ((const char *));
/* Write out a warning, pinpointing it at the given line. */
extern void line_warning PROTO ((const char *, int));
/* Write out a message, pinpointing it at the given line. */
extern void line_pinpoint PROTO ((const char *, int));
/* Report a formatted syntax error. */
extern void format_synerr PROTO ((const char *, const char *));
extern void synerr PROTO ((const char *)); /* report a syntax error */
extern void format_warn PROTO ((const char *, const char *));
extern void warn PROTO ((const char *)); /* report a warning */
extern void yyerror PROTO ((const char *)); /* report a parse error */
extern int yyparse PROTO ((void)); /* the YACC parser */
/* from file scan.l */
/* The Flex-generated scanner for flex. */
extern int flexscan PROTO ((void));
/* Open the given file (if NULL, stdin) for scanning. */
extern void set_input_file PROTO ((char *));
/* Wrapup a file in the lexical analyzer. */
extern int yywrap PROTO ((void));
/* from file sym.c */
/* Save the text of a character class. */
extern void cclinstal PROTO ((Char[], int));
/* Lookup the number associated with character class. */
extern int ccllookup PROTO ((Char[]));
extern void ndinstal PROTO ((const char *, Char[])); /* install a name definition */
extern Char *ndlookup PROTO ((const char *)); /* lookup a name definition */
/* Increase maximum number of SC's. */
extern void scextend PROTO ((void));
extern void scinstal PROTO ((const char *, int)); /* make a start condition */
/* Lookup the number associated with a start condition. */
extern int sclookup PROTO ((const char *));
/* from file tblcmp.c */
/* Build table entries for dfa state. */
extern void bldtbl PROTO ((int[], int, int, int, int));
extern void cmptmps PROTO ((void)); /* compress template table entries */
extern void expand_nxt_chk PROTO ((void)); /* increase nxt/chk arrays */
/* Finds a space in the table for a state to be placed. */
extern int find_table_space PROTO ((int *, int));
extern void inittbl PROTO ((void)); /* initialize transition tables */
/* Make the default, "jam" table entries. */
extern void mkdeftbl PROTO ((void));
/* Create table entries for a state (or state fragment) which has
* only one out-transition.
extern void mk1tbl PROTO ((int, int, int, int));
/* Place a state into full speed transition table. */
extern void place_state PROTO ((int *, int, int));
/* Save states with only one out-transition to be processed later. */
extern void stack1 PROTO ((int, int, int, int));
/* from file yylex.c */
extern int yylex PROTO ((void));
/* A growable array. See buf.c. */
struct Buf {
void *elts; /* elements. */
int nelts; /* number of elements. */
size_t elt_size; /* in bytes. */
int nmax; /* max capacity of elements. */
extern void buf_init PROTO ((struct Buf * buf, size_t elem_size));
extern void buf_destroy PROTO ((struct Buf * buf));
extern struct Buf *buf_append
PROTO ((struct Buf * buf, const void *ptr, int n_elem));
extern struct Buf *buf_concat PROTO((struct Buf* dest, const struct Buf* src));
extern struct Buf *buf_strappend PROTO ((struct Buf *, const char *str));
extern struct Buf *buf_strnappend
PROTO ((struct Buf *, const char *str, int nchars));
extern struct Buf *buf_strdefine
PROTO ((struct Buf * buf, const char *str, const char *def));
extern struct Buf *buf_prints PROTO((struct Buf *buf, const char *fmt, const char* s));
extern struct Buf *buf_m4_define PROTO((struct Buf *buf, const char* def, const char* val));
extern struct Buf *buf_m4_undefine PROTO((struct Buf *buf, const char* def));
extern struct Buf *buf_print_strings PROTO((struct Buf * buf, FILE* out));
extern struct Buf *buf_linedir PROTO((struct Buf *buf, const char* filename, int lineno));
extern struct Buf userdef_buf; /* a string buffer for #define's generated by user-options on cmd line. */
extern struct Buf defs_buf; /* a char* buffer to save #define'd some symbols generated by flex. */
extern struct Buf yydmap_buf; /* a string buffer to hold yydmap elements */
extern struct Buf m4defs_buf; /* Holds m4 definitions. */
extern struct Buf top_buf; /* contains %top code. String buffer. */
/* For blocking out code from the header file. */
#define OUT_BEGIN_CODE() outn("m4_ifdef( [[M4_YY_IN_HEADER]],,[[")
#define OUT_END_CODE() outn("]])")
/* For setjmp/longjmp (instead of calling exit(2)). Linkage in main.c */
extern jmp_buf flex_main_jmp_buf;
#define FLEX_EXIT(status) longjmp(flex_main_jmp_buf,(status)+1)
/* Removes all \n and \r chars from tail of str. returns str. */
extern char *chomp (char *str);
/* ctype functions forced to return boolean */
#define b_isalnum(c) (isalnum(c)?true:false)
#define b_isalpha(c) (isalpha(c)?true:false)
#define b_isascii(c) (isascii(c)?true:false)
#define b_isblank(c) (isblank(c)?true:false)
#define b_iscntrl(c) (iscntrl(c)?true:false)
#define b_isdigit(c) (isdigit(c)?true:false)
#define b_isgraph(c) (isgraph(c)?true:false)
#define b_islower(c) (islower(c)?true:false)
#define b_isprint(c) (isprint(c)?true:false)
#define b_ispunct(c) (ispunct(c)?true:false)
#define b_isspace(c) (isspace(c)?true:false)
#define b_isupper(c) (isupper(c)?true:false)
#define b_isxdigit(c) (isxdigit(c)?true:false)
/* return true if char is uppercase or lowercase. */
bool has_case(int c);
/* Change case of character if possible. */
int reverse_case(int c);
/* return false if [c1-c2] is ambiguous for a caseless scanner. */
bool range_covers_case (int c1, int c2);
* From "filter.c"
/** A single stdio filter to execute.
* The filter may be external, such as "sed", or it
* may be internal, as a function call.
struct filter {
int (*filter_func)(struct filter*); /**< internal filter function */
void * extra; /**< extra data passed to filter_func */
int argc; /**< arg count */
const char ** argv; /**< arg vector, \0-terminated */
struct filter * next; /**< next filter or NULL */
/* output filter chain */
extern struct filter * output_chain;
extern struct filter *filter_create_ext PROTO((struct filter * chain, const char *cmd, ...));
struct filter *filter_create_int PROTO((struct filter *chain,
int (*filter_func) (struct filter *),
void *extra));
extern bool filter_apply_chain PROTO((struct filter * chain));
extern int filter_truncate (struct filter * chain, int max_len);
extern int filter_tee_header PROTO((struct filter *chain));
extern int filter_fix_linedirs PROTO((struct filter *chain));
* From "regex.c"
extern regex_t regex_linedir, regex_blank_line;
bool flex_init_regex(void);
void flex_regcomp(regex_t *preg, const char *regex, int cflags);
char *regmatch_dup (regmatch_t * m, const char *src);
char *regmatch_cpy (regmatch_t * m, char *dest, const char *src);
int regmatch_len (regmatch_t * m);
int regmatch_strtol (regmatch_t * m, const char *src, char **endptr, int base);
bool regmatch_empty (regmatch_t * m);
/* From "scanflags.h" */
typedef unsigned int scanflags_t;
extern scanflags_t* _sf_stk;
extern size_t _sf_top_ix, _sf_max; /**< stack of scanner flags. */
#define _SF_CASE_INS 0x0001
#define _SF_DOT_ALL 0x0002
#define _SF_SKIP_WS 0x0004
#define sf_top() (_sf_stk[_sf_top_ix])
#define sf_case_ins() (sf_top() & _SF_CASE_INS)
#define sf_dot_all() (sf_top() & _SF_DOT_ALL)
#define sf_skip_ws() (sf_top() & _SF_SKIP_WS)
#define sf_set_case_ins(X) ((X) ? (sf_top() |= _SF_CASE_INS) : (sf_top() &= ~_SF_CASE_INS))
#define sf_set_dot_all(X) ((X) ? (sf_top() |= _SF_DOT_ALL) : (sf_top() &= ~_SF_DOT_ALL))
#define sf_set_skip_ws(X) ((X) ? (sf_top() |= _SF_SKIP_WS) : (sf_top() &= ~_SF_SKIP_WS))
extern void sf_init(void);
extern void sf_push(void);
extern void sf_pop(void);
#endif /* not defined FLEXDEF_H */