tree e8fbb2fec082bdc79a4ddccca2ff8f79ebd7876b
parent acd9730d1e794f85caf1192fe8788876e6f96305
author Ido Schimmel <idosch@nvidia.com> 1604928599 +0100
committer Michal Kubecek <mkubecek@suse.cz> 1605018389 +0100

ethtool: Improve compatibility between netlink and ioctl interfaces

With the ioctl interface, when autoneg is enabled, but without
specifying speed, duplex or link modes, the advertised link modes are
set to the supported link modes by the ethtool user space utility.

This does not happen when using the netlink interface. Fix this
incompatibility problem by having ethtool query the supported link modes
from the kernel and advertise all the "real" ones when only "autoneg on"
is specified.

Before:

Settings for eth0:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full
	                        100baseT/Half 100baseT/Full
	                        1000baseT/Full
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  100baseT/Half 100baseT/Full
	Advertised pause frame use: No
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Speed: 1000Mb/s
	Duplex: Full
	Auto-negotiation: on
	Port: Twisted Pair
	PHYAD: 0
	Transceiver: internal
	MDI-X: off (auto)
	Supports Wake-on: umbg
	Wake-on: d
        Current message level: 0x00000007 (7)
                               drv probe link
	Link detected: yes

After:

Settings for eth0:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full
	                        100baseT/Half 100baseT/Full
	                        1000baseT/Full
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  10baseT/Half 10baseT/Full
	                        100baseT/Half 100baseT/Full
	                        1000baseT/Full
	Advertised pause frame use: No
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Speed: 1000Mb/s
	Duplex: Full
	Auto-negotiation: on
	Port: Twisted Pair
	PHYAD: 0
	Transceiver: internal
	MDI-X: on (auto)
	Supports Wake-on: umbg
	Wake-on: d
        Current message level: 0x00000007 (7)
                               drv probe link
	Link detected: yes

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>