| configdir=$(sysconfdir)/dbus-1 |
| dbus_daemon_execdir = $(DBUS_DAEMONDIR) |
| |
| DBUS_BUS_LIBS = \ |
| $(XML_LIBS) \ |
| $(SELINUX_LIBS) \ |
| $(THREAD_LIBS) \ |
| $(ADT_LIBS) \ |
| $(NETWORK_libs) \ |
| $(NULL) |
| |
| DBUS_LAUNCHER_LIBS = \ |
| $(XML_LIBS) \ |
| $(THREAD_LIBS) \ |
| $(NETWORK_libs) \ |
| $(NULL) |
| |
| AM_CPPFLAGS = \ |
| -I$(top_srcdir) \ |
| $(XML_CFLAGS) \ |
| -DDBUS_SYSTEM_CONFIG_FILE=\""$(configdir)/system.conf"\" \ |
| -DDBUS_COMPILATION \ |
| -DDBUS_STATIC_BUILD \ |
| $(NULL) |
| |
| # if assertions are enabled, improve backtraces |
| AM_LDFLAGS = @R_DYNAMIC_LDFLAG@ |
| |
| EFENCE= |
| |
| CONFIG_IN_FILES= \ |
| session.conf.in \ |
| system.conf.in \ |
| org.freedesktop.dbus-session.plist.in |
| |
| config_DATA= \ |
| session.conf \ |
| system.conf |
| |
| if DBUS_ENABLE_LAUNCHD |
| agentdir=$(LAUNCHD_AGENT_DIR) |
| agent_DATA=org.freedesktop.dbus-session.plist |
| endif |
| |
| if DBUS_USE_LIBXML |
| XML_SOURCES=config-loader-libxml.c |
| endif |
| if DBUS_USE_EXPAT |
| XML_SOURCES=config-loader-expat.c |
| endif |
| |
| if DBUS_BUS_ENABLE_KQUEUE |
| DIR_WATCH_SOURCE=dir-watch-kqueue.c |
| else |
| if DBUS_BUS_ENABLE_INOTIFY |
| DIR_WATCH_SOURCE=dir-watch-inotify.c |
| else |
| if DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX |
| DIR_WATCH_SOURCE=dir-watch-dnotify.c |
| else |
| DIR_WATCH_SOURCE=dir-watch-default.c |
| endif |
| endif |
| endif |
| |
| BUS_SOURCES= \ |
| activation.c \ |
| activation.h \ |
| activation-exit-codes.h \ |
| bus.c \ |
| bus.h \ |
| config-parser.c \ |
| config-parser.h \ |
| config-parser-common.c \ |
| config-parser-common.h \ |
| connection.c \ |
| connection.h \ |
| desktop-file.c \ |
| desktop-file.h \ |
| $(DIR_WATCH_SOURCE) \ |
| dir-watch.h \ |
| dispatch.c \ |
| dispatch.h \ |
| driver.c \ |
| driver.h \ |
| expirelist.c \ |
| expirelist.h \ |
| policy.c \ |
| policy.h \ |
| selinux.h \ |
| selinux.c \ |
| services.c \ |
| services.h \ |
| signals.c \ |
| signals.h \ |
| stats.c \ |
| stats.h \ |
| test.c \ |
| test.h \ |
| utils.c \ |
| utils.h \ |
| $(XML_SOURCES) |
| |
| dbus_daemon_SOURCES= \ |
| $(BUS_SOURCES) \ |
| main.c |
| |
| dbus_daemon_LDADD= \ |
| $(top_builddir)/dbus/libdbus-internal.la \ |
| $(EFENCE) \ |
| $(DBUS_BUS_LIBS) |
| |
| LAUNCH_HELPER_SOURCES= \ |
| $(XML_SOURCES) \ |
| config-parser-common.c \ |
| config-parser-common.h \ |
| config-parser-trivial.c \ |
| config-parser-trivial.h \ |
| desktop-file.c \ |
| desktop-file.h \ |
| utils.c \ |
| utils.h \ |
| activation-exit-codes.h \ |
| activation-helper.h \ |
| activation-helper.c |
| |
| ## This is the installed launch helper with the setuid checks |
| dbus_daemon_launch_helper_SOURCES= \ |
| activation-helper-bin.c \ |
| $(LAUNCH_HELPER_SOURCES) |
| |
| dbus_daemon_launch_helper_LDADD= \ |
| $(top_builddir)/dbus/libdbus-internal.la \ |
| $(DBUS_LAUNCHER_LIBS) |
| |
| ## we build another binary so we can do the launch testing without root privs. |
| ## DO NOT INSTALL THIS FILE |
| dbus_daemon_launch_helper_test_SOURCES= \ |
| activation-helper-bin.c \ |
| $(LAUNCH_HELPER_SOURCES) |
| |
| dbus_daemon_launch_helper_test_LDADD= \ |
| $(top_builddir)/dbus/libdbus-internal.la \ |
| $(DBUS_LAUNCHER_LIBS) |
| |
| dbus_daemon_launch_helper_test_CPPFLAGS = \ |
| $(AM_CPPFLAGS) \ |
| -DACTIVATION_LAUNCHER_TEST |
| |
| ## we build yet another binary so we can do the OOM tests |
| ## DO NOT INSTALL THIS FILE |
| bus_test_launch_helper_SOURCES= \ |
| test-launch-helper.c \ |
| $(LAUNCH_HELPER_SOURCES) |
| |
| bus_test_launch_helper_LDADD= \ |
| $(top_builddir)/dbus/libdbus-internal.la \ |
| $(DBUS_LAUNCHER_LIBS) |
| |
| bus_test_launch_helper_CPPFLAGS = \ |
| $(AM_CPPFLAGS) \ |
| -DACTIVATION_LAUNCHER_TEST \ |
| -DACTIVATION_LAUNCHER_DO_OOM |
| |
| noinst_PROGRAMS = |
| dbus_daemon_exec_PROGRAMS = dbus-daemon |
| if DBUS_UNIX |
| libexec_PROGRAMS = dbus-daemon-launch-helper |
| endif DBUS_UNIX |
| |
| ## Note that TESTS has special meaning (stuff to use in make check). |
| ## We don't actually want to run any of these tests until test/ has been |
| ## compiled, so we don't put them in TESTS here; we run them in test/ |
| ## instead. |
| |
| if DBUS_BUILD_TESTS |
| ## we use noinst_PROGRAMS not check_PROGRAMS so that we build |
| ## even when not doing "make check" |
| |
| # run as a test by test/Makefile.am |
| noinst_PROGRAMS += bus-test bus-test-system |
| |
| if DBUS_UNIX |
| # run as a test by test/Makefile.am |
| noinst_PROGRAMS += bus-test-launch-helper |
| # this is used by the tests but is not,itself, a test |
| noinst_PROGRAMS += dbus-daemon-launch-helper-test |
| endif DBUS_UNIX |
| |
| endif DBUS_BUILD_TESTS |
| |
| bus_test_system_SOURCES= \ |
| $(XML_SOURCES) \ |
| config-parser-common.c \ |
| config-parser-common.h \ |
| config-parser-trivial.c \ |
| config-parser-trivial.h \ |
| utils.c \ |
| utils.h \ |
| test-system.c |
| |
| bus_test_system_LDADD=$(top_builddir)/dbus/libdbus-internal.la $(DBUS_BUS_LIBS) |
| |
| bus_test_SOURCES= \ |
| $(BUS_SOURCES) \ |
| test-main.c |
| |
| bus_test_LDADD=$(top_builddir)/dbus/libdbus-internal.la $(DBUS_BUS_LIBS) |
| |
| ## mop up the gcov files |
| clean-local: |
| /bin/rm *.bb *.bbg *.da *.gcov || true |
| |
| install-data-hook: |
| $(mkinstalldirs) $(DESTDIR)$(localstatedir)/run/dbus |
| $(mkinstalldirs) $(DESTDIR)$(configdir)/system.d |
| $(mkinstalldirs) $(DESTDIR)$(configdir)/session.d |
| $(mkinstalldirs) $(DESTDIR)$(datadir)/dbus-1/services |
| $(mkinstalldirs) $(DESTDIR)$(datadir)/dbus-1/system-services |
| if HAVE_SYSTEMD |
| # Install dbus.socket as default implementation of a D-Bus stack. |
| # Deliberately not using $(LN_S) here: ln -fs is not universally portable, |
| # but neither is systemd, so it's OK to assume here that ln complies with SUS. |
| $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants |
| ln -fs ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/dbus.target.wants/dbus.socket |
| # Unconditionally enable D-Bus on systemd installations |
| $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants |
| ln -fs ../dbus.socket $(DESTDIR)$(systemdsystemunitdir)/sockets.target.wants/dbus.socket |
| $(mkinstalldirs) $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants |
| ln -fs ../dbus.service $(DESTDIR)$(systemdsystemunitdir)/multi-user.target.wants/dbus.service |
| endif |
| |
| if DBUS_UNIX |
| install-exec-hook: |
| if test `id -u` -eq 0; then \ |
| chown root:$(DBUS_USER) $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \ |
| chmod 4750 $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \ |
| else \ |
| echo "Not installing $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper binary setuid!"; \ |
| echo "You'll need to manually set permissions to root:$(DBUS_USER) and permissions 4750"; \ |
| fi |
| endif |
| |
| #### Init scripts fun |
| SCRIPT_IN_FILES=messagebus.in \ |
| messagebus-config.in \ |
| rc.messagebus.in |
| |
| ## Red Hat start |
| if DBUS_INIT_SCRIPTS_RED_HAT |
| |
| initddir=$(sysconfdir)/rc.d/init.d |
| |
| initd_SCRIPTS= \ |
| messagebus |
| |
| endif |
| ## Red Hat end |
| |
| ## Slackware start |
| if DBUS_INIT_SCRIPTS_SLACKWARE |
| |
| initddir=$(sysconfdir)/rc.d/ |
| |
| initd_SCRIPTS= \ |
| rc.messagebus |
| |
| endif |
| ## Slackware end |
| |
| ## Cygwin start |
| if DBUS_INIT_SCRIPTS_CYGWIN |
| |
| bin_SCRIPTS= \ |
| messagebus-config |
| |
| endif |
| ## Cygwin end |
| |
| if HAVE_SYSTEMD |
| SCRIPT_IN_FILES += \ |
| dbus.service.in \ |
| dbus.socket.in |
| |
| systemdsystemunit_DATA = \ |
| dbus.service \ |
| dbus.socket |
| endif |
| |
| #### Extra dist |
| |
| EXTRA_DIST=$(CONFIG_IN_FILES) $(SCRIPT_IN_FILES) |
