// Copyright 2017 The Chromium OS Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

syntax = "proto3";
option optimize_for = LITE_RUNTIME;

// This file defines messages used for starting, stopping, and managing VMs.
package vm_tools.concierge;
option go_package = "vm_concierge";

// Specification of the key components of a VM.
message VirtualMachineSpec {
  // Path to the kernel that should be used for the VM.
  string kernel = 1;

  // Path to the disk image that should be used as the root file system for
  // the VM.
  string rootfs = 2;
}

// The type of disk image.
enum DiskImageType {
  // A raw file.
  DISK_IMAGE_RAW = 0;

  // A qcow2-compatible disk image.
  DISK_IMAGE_QCOW2 = 1;
}

// Describes any additional disk images that should be mounted inside the VM.
message DiskImage {
  // Path to the disk image on the host.
  string path = 1;

  // Path where this disk image will be mounted inside the VM.
  string mount_point = 2;

  // The file system type for this disk image.
  string fstype = 3;

  // Any special flags to be used when mounting the file system.  Specified the
  // same way as in mount(2).
  uint64 flags = 4;

  // Any additional data associated with the mount.
  string data = 5;

  // If true, the disk image will be mounted writable.
  bool writable = 6;

  // If true, the disk image will be mounted.
  bool do_mount = 7;

  // Image type of the disk.
  DiskImageType image_type = 8;
}

// Information about a particular VM.
message VmInfo {
  // The IPv4 address assigned to the VM, in network byte order.
  fixed32 ipv4_address = 1;

  // The process ID of the main crosvm process for the VM.
  int32 pid = 2;

  // The virtual socket context id assigned to the VM.
  int64 cid = 3;
}

// Information that must be included with every StartVm dbus message.
message StartVmRequest {
  // The VM that should be started. This is ignored if starting a termina VM,
  // which will always use the latest component from imageloader.
  VirtualMachineSpec vm = 1;

  // Any additional disks that should be mounted inside the VM.
  repeated DiskImage disks = 2;

  // Path to a shared directory that will be mounted via NFS inside the VM.
  string shared_directory = 3;

  // The human-readable name to be assigned to this VM.
  string name = 4;

  // If true, concierge should also perform termina-specific setup.
  bool start_termina = 5;

  // If true, a file descriptor must be passed along with the message and that
  // file descriptor will be used for storage.
  // Ignored unless |start_termina| is true.
  bool use_fd_for_storage = 6;
}

// Information sent back by vm_concierge in response to a StartVm dbus message.
message StartVmResponse {
  // If true, the VM was started successfully.  |vm_info| will have non-default
  // values only if this is true.
  bool success = 1;

  // If the VM failed to start, the reason for the failure.
  string failure_reason = 2;

  // Information about the VM that was started, if successful.
  VmInfo vm_info = 3;
}

// Information that must be included with every StopVm dbus message.
message StopVmRequest {
  // The name of the VM to be stopped.
  string name = 1;
}

// Response sent back by vm_concierge when it receives a StopVm dbus message.
message StopVmResponse {
  // If true, the requested VM was stopped.
  bool success = 1;

  // The failure_reason if the requested VM could not be stopped.
  string failure_reason = 2;
}

// Request for information about the VM.
message GetVmInfoRequest {
  // The name of the VM to query.
  string name = 1;
}

// Response sent back by vm_concierge for a GetVmInfo dbus message.
message GetVmInfoResponse {
  // If true, the requested VM exists and info was returned.
  bool success = 1;

  // Information about the VM that was requested.
  VmInfo vm_info = 2;
}

// The type of storage location for a disk image.
enum StorageLocation {
  // Subdirectory under /home/root/<id>/crosvm.
  STORAGE_CRYPTOHOME_ROOT = 0;

  // The user's Downloads directory, under /home/user/<id>/Downloads.
  STORAGE_CRYPTOHOME_DOWNLOADS = 1;
}

enum DiskImageStatus {
  // Unknown status.
  DISK_STATUS_UNKNOWN = 0;

  // The disk image was created.
  DISK_STATUS_CREATED = 1;

  // The disk already existed.
  DISK_STATUS_EXISTS = 2;

  // Unable to create the disk image.
  DISK_STATUS_FAILED = 3;

  // Specified Disk does not exist.
  DISK_STATUS_DOES_NOT_EXIST = 4;

  // The specified disk was destroyed.
  DISK_STATUS_DESTROYED = 5;
}

// Request to concierge to create a disk image.
message CreateDiskImageRequest {
  // The cryptohome id for the user's encrypted storage.
  string cryptohome_id = 1;

  // The path to the disk image. This must be a relative path, and any
  // directories must already exist.
  string disk_path = 2;

  // The logical size of the new disk image, in bytes.
  uint64 disk_size = 3;

  // The type of disk image to be created.
  DiskImageType image_type = 4;

  // The storage location for the disk image.
  StorageLocation storage_location = 5;
}

// Response to a CreateDiskImageRequest.
message CreateDiskImageResponse {
  // If true, the disk image has been successfully created.
  DiskImageStatus status = 1;

  // The absolute path to the created disk image, if it was successfully
  // created or already existed.
  string disk_path = 2;

  // The failure reason if the disk image could not be created or doesn't exist.
  string failure_reason = 3;
}

// Request to concierge to destroy a disk image.
message DestroyDiskImageRequest {
  // The cryptohome id for the user's encrypted storage.
  string cryptohome_id = 1;

  // The path to the disk image. This must be a relative path.
  string disk_path = 2;

  // The storage location for the disk image.
  StorageLocation storage_location = 3;
}

// Response to a DestroyDiskImageRequest.
message DestroyDiskImageResponse {
  // If DISK_STATUS_DESTROYED, the disk image has been successfully destroyed.
  // If DISK_STATUS_DOES_NOT_EXIST, the disk image had already been removed.
  DiskImageStatus status = 1;

  // The failure reason if the disk image could not be destroyed or doesn't exist.
  string failure_reason = 3;
}

// Request to list all VM disk images in the given storage area.
message ListVmDisksRequest {
  // The cryptohome id for the user's encrypted storage.
  string cryptohome_id = 1;

  // The storage location to check.
  StorageLocation storage_location = 2;
}

// Response to ListVmDisks {
message ListVmDisksResponse {
  // If true, the images array is valid.
  bool success = 1;

  // List of disk images.
  repeated string images = 2;

  // The failure reason if the disks could not be listed.
  string failure_reason = 3;
}

// Signal for when a container has started up.
message ContainerStartedSignal {
  // Name of the VM the container is in.
  string vm_name = 1;

  // Name of the container within the VM.
  string container_name = 2;
}

// Request to start a specified container image within a VM. If the container
// does not exist in the VM it will be created. Used with the StartContainer
// D-Bus message into vm_concierge.
message StartContainerRequest {
  // Name of the VM to start the container in.
  string vm_name = 1;

  // Name of the container to start within the VM. If empty, the default
  // container name will be used.
  string container_name = 2;

  // Username for the default user in the container. This is only used if the
  // container has not been created yet.
  string container_username = 3;

  // Async mode is always used now.
  bool async = 4 [deprecated=true];
}

enum ContainerStatus {
  // Unknown status.
  CONTAINER_STATUS_UNKNOWN = 0;

  // The container is already running.
  CONTAINER_STATUS_RUNNING = 1;

  // The container is currently starting up.
  CONTAINER_STATUS_STARTING = 2;

  // The container failed to startup.
  CONTAINER_STATUS_FAILURE = 3;
}

// Response sent back by vm_concierge when it receives a StartContaienr D-Bus
// message.
message StartContainerResponse {
  // Use the status field instead.
  bool success = 1 [deprecated=true];

  // The failure_reason if the status is CONTAINER_STATUS_FAILURE.
  string failure_reason = 2;

  // The status of the container as a result of the StartContainer call. If the
  // status is CONTAINER_STATUS_STARTING then a D-Bus signal will be sent to
  // indicate whether success or failure occurred. The signal should be
  // registered for before the StartContainer call is made because it may be
  // sent before the call returns.
  ContainerStatus status = 3;
}

// Request to launch on application in the specified VM/container. Used with the
// LaunchContainerApplication D-Bus message into vm_concierge.
message LaunchContainerApplicationRequest {
  // Name of the VM to target.
  string vm_name = 1;

  // Name of the container within the VM to target, if empty the default
  // container name will be used.
  string container_name = 2;

  // ID of the application to launch, should map to the desktop_file_id that
  // is in the application list sent back from the container.
  string desktop_file_id = 3;
}

// Response sent back by vm_concierge when it receives a
// LaunchContainerApplication D-Bus message.
message LaunchContainerApplicationResponse {
  // If true, the requested application launched successfully.
  bool success = 1;

  // The failure_reason if the requested application could not be started.
  string failure_reason = 2;
}