blob: b964b431ccaa613ca4e3c2f8ac3b1e1983cd6179 [file] [log] [blame]
[ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0x0
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuset
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct
[ 0.000000] [0: swapper: 0] Initializing cgroup subsys schedtune
[ 0.000000] [0: swapper: 0] schedtune configured to support 5 boost groups
[ 0.000000] [0: swapper: 0] Linux version 4.4.16-10895874 (dpi@SWHE7721) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Mar 11 22:54:14 KST 2017
[ 0.000000] [0: swapper: 0] Boot CPU: AArch64 Processor [51af8014]
[ 0.000000] [0: swapper: 0] Machine: Samsung DREAMQ PROJECT Rev12
[ 0.000000] [0: swapper: 0] androidboot.revision c
[ 0.000000] [0: swapper: 0] boot_recovery, is_boot_recovery[0]
[ 0.000000] [0: swapper: 0] setup_bootmode: boot_mode is 0
[ 0.000000] [0: swapper: 0] charging_mode() : 0x30(48)
[ 0.000000] [0: swapper: 0] set_afc_mode: afc_mode is 0x00
[ 0.000000] [0: swapper: 0] val = 49
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'modem_region@8ac00000': base 0x000000008ac00000, size 109 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'qseecom_region': base 0x00000000fce00000, size 20 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'splash_region@9d600000': base 0x000000009d400000, size 36 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'sec_debug_low_region@0': base 0x0000000085000000, size 4 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'pil_slpi_region': base 0x0000000094500000, size 12 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'pil_mba_region': base 0x0000000095100000, size 2 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'pil_video_region': base 0x0000000094000000, size 5 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'pil_adsp_region': base 0x0000000091900000, size 39 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'ramoops@84F00000': base 0x0000000084f00000, size 1 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'ss_plog@84B00000': base 0x0000000084b00000, size 4 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'tima_region@9F800000': base 0x000000009f800000, size 2 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'rkp_region@0x9FA00000': base 0x000000009fa00000, size 13 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'camera_mem_region@0xC0000000': base 0x00000000c0000000, size 280 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'removed_regions': base 0x0000000085800000, size 73 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'secure_camera_region': base 0x00000000fe400000, size 20 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'secure_camera_scratch_region': base 0x00000000fe200000, size 2 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f7000000, size 92 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000f7000000, size 92 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
[ 0.000000] [0: swapper: 0] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000f6800000, size 8 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000f6800000, size 8 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
[ 0.000000] [0: swapper: 0] Reserved memory: allocated memory for 'linux,cma' node: base 0x00000000f4800000, size 32 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000f4800000, size 32 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000085000000, size 4 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node sec_debug_low_region@0, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000085800000, size 73 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node removed_regions, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000008ac00000, size 109 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node modem_region@8ac00000, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000091900000, size 39 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node pil_adsp_region, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000094000000, size 5 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node pil_video_region, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000094500000, size 12 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node pil_slpi_region, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000095100000, size 2 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node pil_mba_region, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000009f800000, size 2 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node tima_region@9F800000, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000009fa00000, size 13 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node rkp_region@0x9FA00000, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x00000000c0000000, size 280 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node camera_mem_region@0xC0000000, compatible id removed-dma-pool
[ 0.000000] [0: swapper: 0] Reserved memory: created DMA memory pool at 0x00000000fe200000, size 2 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node secure_camera_scratch_region, compatible id shared-dma-pool
[ 0.000000] [0: swapper: 0] Reserved memory: created DMA memory pool at 0x00000000fe400000, size 20 MiB
[ 0.000000] [0: swapper: 0] Reserved memory: initialized node secure_camera_region, compatible id shared-dma-pool
[ 0.000000] [0: swapper: 0] On node 0 totalpages: 971968
[ 0.000000] [0: swapper: 0] DMA zone: 7104 pages used for memmap
[ 0.000000] [0: swapper: 0] DMA zone: 0 pages reserved
[ 0.000000] [0: swapper: 0] DMA zone: 454656 pages, LIFO batch:31
[ 0.000000] [0: swapper: 0] Normal zone: 8083 pages used for memmap
[ 0.000000] [0: swapper: 0] Normal zone: 517312 pages, LIFO batch:31
[ 0.000000] [0: swapper: 0] psci: probing for conduit method from DT.
[ 0.000000] [0: swapper: 0] psci: PSCIv1.0 detected in firmware.
[ 0.000000] [0: swapper: 0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] [0: swapper: 0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] [0: swapper: 0] psci: Initializing psci_cpu_init
[ 0.000000] [0: swapper: 0] psci: Initializing psci_cpu_init
[ 0.000000] [0: swapper: 0] psci: Initializing psci_cpu_init
[ 0.000000] [0: swapper: 0] psci: Initializing psci_cpu_init
[ 0.000000] [0: swapper: 0] psci: Initializing psci_cpu_init
[ 0.000000] [0: swapper: 0] psci: Initializing psci_cpu_init
[ 0.000000] [0: swapper: 0] psci: Initializing psci_cpu_init
[ 0.000000] [0: swapper: 0] PERCPU: Embedded 19 pages/cpu @ffffffc0fe3b9000 s49152 r0 d28672 u77824
[ 0.000000] [0: swapper: 0] pcpu-alloc: s49152 r0 d28672 u77824 alloc=19*4096
[ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] [0: swapper: 0] CPU features: enabling workaround for Kryo2xx Silver erratum 845719
[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 956781
[ 0.000000] [0: swapper: 0] Kernel command line: rcupdate.rcu_expedited=1 console=null androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 sched_enable_hmp=1 sched_enable_power_aware=1 service_locator.enable=1 swiotlb=2048 androidboot.bootdevice=1da4000.ufshc androidboot.serialno=9888203159534b4248 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:ss_dsi_panel_S6E3HA6_AMB577MQ01_WQHD:1:none:cfg:single_dsi lcd_id=0xD14015 cordon=81d9acee5725acd94c75b579383d485d connie=SM-G950U_SINGL_USA_c30f1ea13a90ba0ddec3f0b106b3011d androidboot.sec_atd.tty=/dev/ttyHS8 androidboot.revision=12 ccic_info=1 fg_reset=0 sec_log=0x200000@0x85200000 sec_dbg=0x1FF000@0x85000000 sec_dbg_ex_info=0x400@0x851FF000 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 androidboot.cp_reserved_mem=off androidboot.boot_recovery=0 androidboot.carrierid.param.offset=9437644 androidboot.car<3>[ 0.000000] [0: swapper: 0] [MDSS] get_lcd_attached : LCD_ID = 0xD14015
[ 0.000000] [0: swapper: 0] set_ccic_info: ccic_info: 0x0001
[ 0.000000] [0: swapper: 0] sec_bat_get_fg_reset, fg_reset:0
[ 0.000000] [0: swapper: 0] sec_dbg_setup: str=@0x85000000
[ 0.000000] [0: swapper: 0] sec_dbg_setup: secdbg_paddr = 0x85000000
[ 0.000000] [0: swapper: 0] sec_dbg_setup: secdbg_size = 0x1ff000
[ 0.000000] [0: swapper: 0] sec_debug_ex_info_setup: ex info phy=0x851ff000, size=0x1000
[ 0.000000] [0: swapper: 0] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] [0: swapper: 0] log_buf_len total cpu_extra contributions: 917504 bytes
[ 0.000000] [0: swapper: 0] log_buf_len min size: 524288 bytes
[ 0.000000] [0: swapper: 0] log_buf_len: 2097152 bytes
[ 0.000000] [0: swapper: 0] early log buf free: 512920(97%)
[ 0.000000] [0: swapper: 0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] [0: swapper: 0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] [0: swapper: 0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] [0: swapper: 0] software IO TLB [mem 0xffbff000-0xfffff000] (4MB) mapped at [ffffffc07fbff000-ffffffc07fffefff]
[ 0.000000] [0: swapper: 0] Memory: 3267892K/3887872K available (16446K kernel code, 2206K rwdata, 8320K rodata, 6144K init, 4920K bss, 484812K reserved, 135168K cma-reserved)
[ 0.000000] [0: swapper: 0] Virtual kernel memory layout:
[ 0.000000] [0: swapper: 0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] [0: swapper: 0] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] [0: swapper: 0] .init : 0xffffff80098bc000 - 0xffffff8009ebc000 ( 6144 KB)
[ 0.000000] [0: swapper: 0] .text : 0xffffff800808c000 - 0xffffff800901c000 ( 15936 KB)
[ 0.000000] [0: swapper: 0] .rodata : 0xffffff800901c000 - 0xffffff80098bc000 ( 8832 KB)
[ 0.000000] [0: swapper: 0] .data : 0xffffff8009ebc000 - 0xffffff800a0e3a30 ( 2207 KB)
[ 0.000000] [0: swapper: 0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] [0: swapper: 0] 0xffffffbdc0000000 - 0xffffffbdc3f93000 ( 63 MB actual)
[ 0.000000] [0: swapper: 0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] [0: swapper: 0] HMP scheduling enabled.
[ 0.000000] [0: swapper/0: 0] Preemptible hierarchical RCU implementation.
[ 0.000000] [0: swapper/0: 0] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] [0: swapper/0: 0]
[ 0.000000] [0: swapper/0: 0] **********************************************************
[ 0.000000] [0: swapper/0: 0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] [0: swapper/0: 0] ** **
[ 0.000000] [0: swapper/0: 0] ** trace_printk() being used. Allocating extra memory. **
[ 0.000000] [0: swapper/0: 0] ** **
[ 0.000000] [0: swapper/0: 0] ** This means that this is a DEBUG kernel and it is **
[ 0.000000] [0: swapper/0: 0] ** unsafe for production use. **
[ 0.000000] [0: swapper/0: 0] ** **
[ 0.000000] [0: swapper/0: 0] ** If you see this message and you are not debugging **
[ 0.000000] [0: swapper/0: 0] ** the kernel, report this immediately to your vendor! **
[ 0.000000] [0: swapper/0: 0] ** **
[ 0.000000] [0: swapper/0: 0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] [0: swapper/0: 0] **********************************************************
[ 0.000000] [0: swapper/0: 0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] [0: swapper/0: 0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
[ 0.000000] [0: swapper/0: 0] MPM 1 irq mapping errored -517
[ 0.000000] [0: swapper/0: 0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] [0: swapper/0: 0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000003] [0: swapper/0: 0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.001625] [0: swapper/0: 0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001634] [0: swapper/0: 0] pid_max: default: 32768 minimum: 301
[ 0.005595] [0: swapper/0: 0] SYSREG, after zeroing out master key, mk=0
[ 0.005653] [0: swapper/0: 0] Security Framework initialized
[ 0.005663] [0: swapper/0: 0] SELinux: Initializing.
[ 0.005722] [0: swapper/0: 0] SELinux: Starting in enforcing mode
[ 0.005777] [0: swapper/0: 0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005785] [0: swapper/0: 0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.007005] [0: swapper/0: 0] Initializing cgroup subsys freezer
[ 0.008086] [0: swapper/0: 1] /cpus/cpu@0: Missing clock-frequency property
[ 0.008095] [0: swapper/0: 1] /cpus/cpu@1: Missing clock-frequency property
[ 0.008103] [0: swapper/0: 1] /cpus/cpu@2: Missing clock-frequency property
[ 0.008111] [0: swapper/0: 1] /cpus/cpu@3: Missing clock-frequency property
[ 0.008120] [0: swapper/0: 1] /cpus/cpu@100: Missing clock-frequency property
[ 0.008129] [0: swapper/0: 1] /cpus/cpu@101: Missing clock-frequency property
[ 0.008139] [0: swapper/0: 1] /cpus/cpu@102: Missing clock-frequency property
[ 0.008149] [0: swapper/0: 1] /cpus/cpu@103: Missing clock-frequency property
[ 0.008185] [0: swapper/0: 1] ASID allocator initialised with 65536 entries
[ 0.052562] [0: swapper/0: 1] [MDSS] samsung_panel_init : PBA : ss_dsi_panel_S6E3HA6_AMB577MQ01_WQHD:1:none:cfg:single_dsi / ss_dsi_panel_PBA_BOOTING_FHD
[ 0.052586] [0: swapper/0: 1] [MDSS] samsung_panel_init : MQ01 : ss_dsi_panel_S6E3HA6_AMB577MQ01_WQHD:1:none:cfg:single_dsi / ss_dsi_panel_S6E3HA6_AMB577MQ01_WQHD
[ 0.052838] [0: swapper/0: 1] MSM Memory Dump base table set up
[ 0.052854] [0: swapper/0: 1] MSM Memory Dump apps data table set up
[ 0.081681] [1: swapper/1: 0] CPU1: Booted secondary processor [51af8014]
[ 0.111540] [2: swapper/2: 0] CPU2: Booted secondary processor [51af8014]
[ 0.141562] [3: swapper/3: 0] CPU3: Booted secondary processor [51af8014]
[ 0.172014] [4: swapper/4: 0] CPU4: Booted secondary processor [51af8001]
[ 0.201839] [5: swapper/5: 0] CPU5: Booted secondary processor [51af8001]
[ 0.231878] [6: swapper/6: 0] CPU6: Booted secondary processor [51af8001]
[ 0.261922] [7: swapper/7: 0] CPU7: Booted secondary processor [51af8001]
[ 0.262017] [0: swapper/0: 1] Brought up 8 CPUs
[ 0.262053] [0: swapper/0: 1] SMP: Total of 8 processors activated.
[ 0.262060] [0: swapper/0: 1] CPU features: detected feature: GIC system register CPU interface
[ 0.262069] [0: swapper/0: 1] CPU: All CPU(s) started at EL1
[ 0.262145] [0: migration/0: 10] alternatives: patching kernel code
[ 0.322008] [0: swapper/0: 1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.333278] [0: swapper/0: 1] pinctrl core: initialized pinctrl subsystem
[ 0.334086] [0: swapper/0: 1] NET: Registered protocol family 16
[ 0.336495] [0: swapper/0: 1] cpuidle: using governor ladder
[ 0.336507] [0: swapper/0: 1] cpuidle: using governor menu
[ 0.336517] [0: swapper/0: 1] cpuidle: using governor qcom
[ 0.337876] [0: swapper/0: 1] vdso: 2 pages (1 code @ ffffff8009022000, 1 data @ ffffff8009ec0000)
[ 0.338626] [0: swapper/0: 1] DMA: preallocated 2048 KiB pool for atomic allocations
[ 0.338714] [0: swapper/0: 1] samsung sys class init.
[ 0.350425] [0: swapper/0: 1] exit: IPA_USB init success!
[ 0.350612] [0: swapper/0: 1] allocating 262152 bytes at ffffffc0f8380000 (8078000000 physical) for avc log
[ 0.350618] [0: swapper/0: 1] sec_avc_log_init: no old log found
[ 0.350968] [0: swapper/0: 1] sec_dt_addr_init: restart_reason addr : 0xffffff800801a65c(0x8001a65c)
[ 0.351107] [0: swapper/0: 1] sec_dt_addr_init: upload_cause addr : 0xffffff800801c66c(0x8001c66c)
[ 0.351114] [0: swapper/0: 1] (sec_debug_set_upload_magic) 776655ee
[ 0.351120] [0: swapper/0: 1] sec_debug_set_qc_dload_magic: on=1
[ 0.351127] [0: swapper/0: 1] set_dload_mode <1> ( 8cf279c )
[ 0.351288] [0: swapper/0: 1] sec_debug_set_upload_cause : cafebabe
[ 0.351305] [0: swapper/0: 1] (sec_debug_set_upload_cause) cafebabe
[ 0.351376] [0: swapper/0: 1] __init_sec_debug_log: vaddr=0xffffff800aa00000 paddr=0x85000000 size=0x1ff000 sizeof(struct sec_debug_log)=0x8a0b0
[ 0.352319] [0: swapper/0: 1] __init_sec_debug_log: init done
[ 0.352394] [0: swapper/0: 1] allocating 262152 bytes at ffffffc015380000 (178380020 physical) for avc log
[ 0.352400] [0: swapper/0: 1] sec_avc_log_init: no old log found
[ 0.357603] [0: swapper/0: 1] spmi spmi-0: PMIC arbiter version v3 (0x30000000)
[ 0.371730] [0: swapper/0: 1] sps:sps is ready.
[ 0.377193] [0: swapper/0: 1] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
[ 0.377623] [0: swapper/0: 1] msm_rpm_dev_probe: APSS-RPM communication over GLINK
[ 0.386449] [1: swapper/0: 1] platform 17300000.qcom,lpass: assigned reserved memory node pil_adsp_region
[ 0.386758] [1: swapper/0: 1] platform 4080000.qcom,mss: assigned reserved memory node modem_region@8ac00000
[ 0.388304] [1: swapper/0: 1] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[ 0.388339] [1: swapper/0: 1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
[ 0.388346] [1: swapper/0: 1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[ 0.388355] [1: swapper/0: 1] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
[ 0.390966] [0:smem_native_rpm: 56] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
[ 0.399234] [4: swapper/0: 1] platform 5c00000.qcom,ssc: assigned reserved memory node pil_slpi_region
[ 0.399904] [4: swapper/0: 1] platform cce0000.qcom,venus: assigned reserved memory node pil_video_region
[ 0.400491] [4: swapper/0: 1] msm_watchdog 17817000.qcom,wdt: wdog absent resource not present
[ 0.400819] [4: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[0] @0x177d24000 PA:0xffffffc0f7d24000
[ 0.400861] [4: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[1] @0x177d24800 PA:0xffffffc0f7d24800
[ 0.400897] [4: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[2] @0x177d25000 PA:0xffffffc0f7d25000
[ 0.400931] [4: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[3] @0x177d25800 PA:0xffffffc0f7d25800
[ 0.400964] [4: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[4] @0x177d26000 PA:0xffffffc0f7d26000
[ 0.400997] [4: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[5] @0x177d26800 PA:0xffffffc0f7d26800
[ 0.401029] [4: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[6] @0x177d27000 PA:0xffffffc0f7d27000
[ 0.401061] [4: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[7] @0x177d27800 PA:0xffffffc0f7d27800
[ 0.401244] [4: swapper/0: 1] msm_watchdog 17817000.qcom,wdt: MSM Watchdog Initialized
[ 0.411064] [4: swapper/0: 1] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[ 0.415564] [4: swapper/0: 1] genirq: Setting trigger mode 1 for irq 161 failed (gic_set_type+0x0/0xc4)
[ 0.443989] [4: swapper/0: 1] __of_mpm_init(): MPM driver mapping exists
[ 0.455225] [4: swapper/0: 1] irq: no irq domain found for /soc/qcom,mdss_mdp@c900000 !
[ 0.460661] [4: swapper/0: 1] i2c-msm-v2 c179000.i2c: probing driver i2c-msm-v2
[ 0.460819] [4: swapper/0: 1] i2c-msm-v2 c179000.i2c: error on clk_get(core_clk):-517
[ 0.460854] [4: swapper/0: 1] i2c-msm-v2 c179000.i2c: error probe() failed with err:-517
[ 0.461872] [4: swapper/0: 1] i2c-msm-v2 c17a000.i2c: probing driver i2c-msm-v2
[ 0.462009] [4: swapper/0: 1] i2c-msm-v2 c17a000.i2c: error on clk_get(core_clk):-517
[ 0.462039] [4: swapper/0: 1] i2c-msm-v2 c17a000.i2c: error probe() failed with err:-517
[ 0.463597] [4: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 0.463627] [4: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 0.463788] [4: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 0.463813] [4: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 0.463891] [4: swapper/0: 1] i2c-msm-v2 c1b5000.i2c: probing driver i2c-msm-v2
[ 0.464022] [4: swapper/0: 1] i2c-msm-v2 c1b5000.i2c: error on clk_get(core_clk):-517
[ 0.464050] [4: swapper/0: 1] i2c-msm-v2 c1b5000.i2c: error probe() failed with err:-517
[ 0.465196] [4: swapper/0: 1] i2c-msm-v2 c1b6000.i2c: probing driver i2c-msm-v2
[ 0.465330] [4: swapper/0: 1] i2c-msm-v2 c1b6000.i2c: error on clk_get(core_clk):-517
[ 0.465360] [4: swapper/0: 1] i2c-msm-v2 c1b6000.i2c: error probe() failed with err:-517
[ 0.466474] [4: swapper/0: 1] i2c-msm-v2 c1b7000.i2c: probing driver i2c-msm-v2
[ 0.466607] [4: swapper/0: 1] i2c-msm-v2 c1b7000.i2c: error on clk_get(core_clk):-517
[ 0.466637] [4: swapper/0: 1] i2c-msm-v2 c1b7000.i2c: error probe() failed with err:-517
[ 0.483622] [4: swapper/0: 1] initcall arm64_device_init+0x0/0x6c returned 0 after 126953 usecs
[ 0.531576] [4: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[ 0.531843] [4: kworker/u16:0: 6] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
[ 0.531871] [4: kworker/u16:0: 6] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[ 0.531905] [4: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
[ 0.533088] [4: kworker/u16:0: 6] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
[ 0.534057] [4: kworker/u16:0: 6] i2c-msm-v2 c179000.i2c: probing driver i2c-msm-v2
[ 0.534208] [4: kworker/u16:0: 6] i2c-msm-v2 c179000.i2c: error on clk_get(core_clk):-517
[ 0.534242] [4: kworker/u16:0: 6] i2c-msm-v2 c179000.i2c: error probe() failed with err:-517
[ 0.534994] [4: kworker/u16:0: 6] i2c-msm-v2 c17a000.i2c: probing driver i2c-msm-v2
[ 0.535125] [4: kworker/u16:0: 6] i2c-msm-v2 c17a000.i2c: error on clk_get(core_clk):-517
[ 0.535155] [4: kworker/u16:0: 6] i2c-msm-v2 c17a000.i2c: error probe() failed with err:-517
[ 0.536406] [4: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 0.536434] [4: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 0.536592] [4: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 0.536616] [4: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 0.536692] [4: kworker/u16:0: 6] i2c-msm-v2 c1b5000.i2c: probing driver i2c-msm-v2
[ 0.536820] [4: kworker/u16:0: 6] i2c-msm-v2 c1b5000.i2c: error on clk_get(core_clk):-517
[ 0.536848] [4: kworker/u16:0: 6] i2c-msm-v2 c1b5000.i2c: error probe() failed with err:-517
[ 0.537695] [4: kworker/u16:0: 6] i2c-msm-v2 c1b6000.i2c: probing driver i2c-msm-v2
[ 0.537822] [4: kworker/u16:0: 6] i2c-msm-v2 c1b6000.i2c: error on clk_get(core_clk):-517
[ 0.537852] [4: kworker/u16:0: 6] i2c-msm-v2 c1b6000.i2c: error probe() failed with err:-517
[ 0.538699] [4: kworker/u16:0: 6] i2c-msm-v2 c1b7000.i2c: probing driver i2c-msm-v2
[ 0.538826] [4: kworker/u16:0: 6] i2c-msm-v2 c1b7000.i2c: error on clk_get(core_clk):-517
[ 0.538854] [4: kworker/u16:0: 6] i2c-msm-v2 c1b7000.i2c: error probe() failed with err:-517
[ 0.566559] [4: kworker/u16:0: 6] branch_clk_handoff: gcc_mss_mnoc_bimc_axi_clk clock is enabled in HW even though ENABLE_BIT is not set
[ 0.567853] [4: kworker/u16:0: 6] qcom,gcc-8998 100000.qcom,gcc: Registered GCC clocks
[ 0.571243] [4: kworker/u16:0: 6] don't recognize rcg frequency for ahb_clk_src
[ 0.571367] [4: kworker/u16:0: 6] ------------[ cut here ]------------
[ 0.571391] [4: kworker/u16:0: 6] WARNING: at /home/dpi/qb5_8814/workspace/DREAMQLTE_USA_SINGLE/android/kernel/drivers/clk/msm/clock-local2.c:543
[ 0.571409] [4: kworker/u16:0: 6]
[ 0.571438] [4: kworker/u16:0: 6] CPU: 4 PID: 6 Comm: kworker/u16:0 Not tainted 4.4.16-10895874 #1
[ 0.571456] [4: kworker/u16:0: 6] Hardware name: Samsung DREAMQ PROJECT Rev12 (DT)
[ 0.571493] [4: kworker/u16:0: 6] Workqueue: deferwq deferred_probe_work_func
[ 0.571515] [4: kworker/u16:0: 6] task: ffffffc0f966be80 ti: ffffffc0f969c000 task.ti: ffffffc0f969c000
[ 0.571548] [4: kworker/u16:0: 6] PC is at _rcg_clk_get_parent+0x2b8/0x2e0
[ 0.571574] [4: kworker/u16:0: 6] LR is at _rcg_clk_get_parent+0x2b8/0x2e0
[ 0.571595] [4: kworker/u16:0: 6] pc : [<ffffff8008c37624>] lr : [<ffffff8008c37624>] pstate: 60000005
[ 0.571612] [4: kworker/u16:0: 6] sp : ffffffc0f969fa40
[ 0.571630] [4: kworker/u16:0: 6] x29: ffffffc0f969fa40 x28: 0000000000000000
[ 0.571653] [4: kworker/u16:0: 6] x27: 0000000000000038 x26: ffffff80097a2a35
[ 0.571675] [4: kworker/u16:0: 6] x25: 0000000000000000 x24: 0000000000000001
[ 0.571693] [4: kworker/u16:0: 6] x23: 0000000000000000 x22: 0000000000000000
[ 0.571711] [4: kworker/u16:0: 6] x21: 0000000000000000 x20: ffffff800b285004
[ 0.571728] [4: kworker/u16:0: 6] x19: ffffff800a03f7e0 x18: 0000000000000000
[ 0.571745] [4: kworker/u16:0: 6] x17: 0000000000000000 x16: aa4c717a45b55d16
[ 0.571762] [4: kworker/u16:0: 6] x15: 0000000000000000 x14: 0ffffffffffffffe
[ 0.571779] [4: kworker/u16:0: 6] x13: 0000000000000028 x12: 0101010101010101
[ 0.571796] [4: kworker/u16:0: 6] x11: 7f7f7f7f7f7f7f7f x10: fefefefeff02ff05
[ 0.571813] [4: kworker/u16:0: 6] x9 : 7f7f7f7f7f7f7f7f x8 : 6f662079636e6575
[ 0.571830] [4: kworker/u16:0: 6] x7 : 7165726620676372 x6 : ffffff800a0e97af
[ 0.571848] [4: kworker/u16:0: 6] x5 : 0000000000000005 x4 : 0000000000000000
[ 0.571864] [4: kworker/u16:0: 6] x3 : 0000000000000000 x2 : ffffffc0f969c000
[ 0.571881] [4: kworker/u16:0: 6] x1 : 0000000000000000 x0 : 000000000000002d
[ 0.571901] [4: kworker/u16:0: 6]
[ 0.571901] [4: kworker/u16:0: 6] PC: 0xffffff8008c375e4:
[ 0.571928] [4: kworker/u16:0: 6] 75e4 17ffffe3 f9000e60 f9400800 1400000f 3943e260 34000180 90009f01 f9400662
[ 0.571969] [4: kworker/u16:0: 6] 7604 911e2021 aa1303e0 91008021 940f5a1b f9401a61 f0005b40 91311400 97d500ca
[ 0.572006] [4: kworker/u16:0: 6] 7624 d4210000 d2800000 a94153f3 a9425bf5 a94363f7 f94023f9 a8c543fd ca11021e
[ 0.572042] [4: kworker/u16:0: 6] 7644 d65f03c0 00be7bad ca1103d0 a9bf43fd 52800001 52800022 910003fd d1008000
[ 0.572082] [4: kworker/u16:0: 6]
[ 0.572082] [4: kworker/u16:0: 6] LR: 0xffffff8008c375e4:
[ 0.572108] [4: kworker/u16:0: 6] 75e4 17ffffe3 f9000e60 f9400800 1400000f 3943e260 34000180 90009f01 f9400662
[ 0.572144] [4: kworker/u16:0: 6] 7604 911e2021 aa1303e0 91008021 940f5a1b f9401a61 f0005b40 91311400 97d500ca
[ 0.572179] [4: kworker/u16:0: 6] 7624 d4210000 d2800000 a94153f3 a9425bf5 a94363f7 f94023f9 a8c543fd ca11021e
[ 0.572215] [4: kworker/u16:0: 6] 7644 d65f03c0 00be7bad ca1103d0 a9bf43fd 52800001 52800022 910003fd d1008000
[ 0.572254] [4: kworker/u16:0: 6]
[ 0.572254] [4: kworker/u16:0: 6] SP: 0xffffffc0f969fa00:
[ 0.572278] [4: kworker/u16:0: 6] fa00 00000000 00000000 f969fa40 ffffffc0 08c37624 ffffff80 f969fa40 ffffffc0
[ 0.572315] [4: kworker/u16:0: 6] fa20 08c37624 ffffff80 60000005 00000000 744ade7d ffffffc0 00000000 00000000
[ 0.572351] [4: kworker/u16:0: 6] fa40 f969fa90 ffffffc0 45b55d5a aa4c717a 0a03f800 ffffff80 00000000 00000000
[ 0.572387] [4: kworker/u16:0: 6] fa60 0a032f80 ffffff80 000000a8 00000000 00000038 00000000 0a016fd8 ffffff80
[ 0.572423] [4: kworker/u16:0: 6]
[ 0.572467] [4: kworker/u16:0: 6] ---[ end trace 15afbfdbfbd8c237 ]---
[ 0.572485] [4: kworker/u16:0: 6] Call trace:
[ 0.572519] [4: kworker/u16:0: 6] [<ffffff80080941a8>] dump_backtrace+0x0/0x200
[ 0.572547] [4: kworker/u16:0: 6] [<ffffff80080947b0>] bug_handler+0x64/0x8c
[ 0.572571] [4: kworker/u16:0: 6] [<ffffff800808e1f0>] brk_handler+0xa4/0xbc
[ 0.572593] [4: kworker/u16:0: 6] Exception stack(0xffffffc0f969f880 to 0xffffffc0f969f9a0)
[ 0.572622] [4: kworker/u16:0: 6] f880: 0a03f7e0 ffffff80 0b285004 ffffff80 f969fa40 ffffffc0 08c37624 ffffff80
[ 0.572651] [4: kworker/u16:0: 6] f8a0: 00000002 00000000 00000000 00000000 09ee2350 ffffff80 00000004 00000000
[ 0.572679] [4: kworker/u16:0: 6] f8c0: f969f960 ffffffc0 45664846 aa4c717a 0810633c ffffff80 0b285004 ffffff80
[ 0.572705] [4: kworker/u16:0: 6] f8e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
[ 0.572732] [4: kworker/u16:0: 6] f900: 00000000 00000000 097a2a35 ffffff80 0000002d 00000000 00000000 00000000
[ 0.572758] [4: kworker/u16:0: 6] f920: 0000002d 00000000 00000000 00000000 f969c000 ffffffc0 00000000 00000000
[ 0.572784] [4: kworker/u16:0: 6] f940: 00000000 00000000 00000005 00000000 0a0e97af ffffff80 20676372 71657266
[ 0.572812] [4: kworker/u16:0: 6] f960: 636e6575 6f662079 7f7f7f7f 7f7f7f7f ff02ff05 fefefefe 7f7f7f7f 7f7f7f7f
[ 0.572839] [4: kworker/u16:0: 6] f980: 01010101 01010101 00000028 00000000 fffffffe 0fffffff 00000000 00000000
[ 0.572862] [4: kworker/u16:0: 6] [<ffffff800808cc70>] do_debug_exception+0x40/0xb0
[ 0.572881] [4: kworker/u16:0: 6] Exception stack(0xffffffc0f969f880 to 0xffffffc0f969f9a0)
[ 0.572909] [4: kworker/u16:0: 6] f880: 0a03f7e0 ffffff80 0b285004 ffffff80 f969fa40 ffffffc0 08c37624 ffffff80
[ 0.572935] [4: kworker/u16:0: 6] f8a0: 00000002 00000000 00000000 00000000 09ee2350 ffffff80 00000004 00000000
[ 0.572962] [4: kworker/u16:0: 6] f8c0: f969f960 ffffffc0 45664846 aa4c717a 0810633c ffffff80 0b285004 ffffff80
[ 0.572988] [4: kworker/u16:0: 6] f8e0: 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
[ 0.573015] [4: kworker/u16:0: 6] f900: 00000000 00000000 097a2a35 ffffff80 0000002d 00000000 00000000 00000000
[ 0.573041] [4: kworker/u16:0: 6] f920: 0000002d 00000000 00000000 00000000 f969c000 ffffffc0 00000000 00000000
[ 0.573068] [4: kworker/u16:0: 6] f940: 00000000 00000000 00000005 00000000 0a0e97af ffffff80 20676372 71657266
[ 0.573094] [4: kworker/u16:0: 6] f960: 636e6575 6f662079 7f7f7f7f 7f7f7f7f ff02ff05 fefefefe 7f7f7f7f 7f7f7f7f
[ 0.573121] [4: kworker/u16:0: 6] f980: 01010101 01010101 00000028 00000000 fffffffe 0fffffff 00000000 00000000
[ 0.573148] [4: kworker/u16:0: 6] [<ffffff8008c37624>] _rcg_clk_get_parent+0x2b8/0x2e0
[ 0.573173] [4: kworker/u16:0: 6] [<ffffff8008c37668>] rcg_clk_get_parent+0x1c/0x2c
[ 0.573196] [4: kworker/u16:0: 6] [<ffffff8008c34764>] __handoff_clk+0x68/0x2e4
[ 0.573221] [4: kworker/u16:0: 6] [<ffffff8008c351a0>] msm_clock_register+0x184/0x250
[ 0.573245] [4: kworker/u16:0: 6] [<ffffff8008c352fc>] of_msm_clock_register+0x90/0xa8
[ 0.573272] [4: kworker/u16:0: 6] [<ffffff8008c440d8>] msm_mmsscc_8998_probe+0x348/0x39c
[ 0.573298] [4: kworker/u16:0: 6] [<ffffff80086309a4>] platform_drv_probe+0x44/0x98
[ 0.573322] [4: kworker/u16:0: 6] [<ffffff800862ef10>] driver_probe_device+0x118/0x2b8
[ 0.573345] [4: kworker/u16:0: 6] [<ffffff800862f1ec>] __device_attach_driver+0x8c/0xa4
[ 0.573370] [4: kworker/u16:0: 6] [<ffffff800862d8d8>] bus_for_each_drv+0x74/0x98
[ 0.573392] [4: kworker/u16:0: 6] [<ffffff800862ecdc>] __device_attach+0x94/0x104
[ 0.573416] [4: kworker/u16:0: 6] [<ffffff800862f35c>] device_initial_probe+0x14/0x24
[ 0.573438] [4: kworker/u16:0: 6] [<ffffff800862dab4>] bus_probe_device+0x30/0x98
[ 0.573461] [4: kworker/u16:0: 6] [<ffffff800862e808>] deferred_probe_work_func+0x78/0xac
[ 0.573487] [4: kworker/u16:0: 6] [<ffffff80080c0c0c>] process_one_work+0x25c/0x440
[ 0.573511] [4: kworker/u16:0: 6] [<ffffff80080c10f4>] worker_thread+0x304/0x42c
[ 0.573533] [4: kworker/u16:0: 6] [<ffffff80080c67a4>] kthread+0xdc/0xe8
[ 0.602842] [4: kworker/u16:0: 6] qcom,mmsscc-8998 c8c0000.qcom,mmsscc: Registered MMSS clocks.
[ 0.612671] [4: kworker/u16:0: 6] qcom,gpucc-8998 5065000.qcom,gpucc: Registered GPU clocks (barring gfx3d clocks)
[ 0.617660] [4: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[ 0.617922] [4: kworker/u16:0: 6] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
[ 0.617948] [4: kworker/u16:0: 6] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
[ 0.617980] [4: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
[ 0.618606] [4: kworker/u16:0: 6] cprh_msm8998_kbss_read_fuse_data: apc0_pwrcl_corner: speed bin = 2
[ 0.618633] [4: kworker/u16:0: 6] cprh_msm8998_kbss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 3
[ 0.618856] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused LowSVS: open-loop= 588000 uV
[ 0.618880] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 626000 uV
[ 0.618902] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 748000 uV
[ 0.618922] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO_L1: open-loop= 856000 uV
[ 0.619124] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused LowSVS: quot[11]= 580
[ 0.619151] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[11]= 663, quot_offset[11]= 80
[ 0.619178] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[11]= 983, quot_offset[11]= 320
[ 0.619203] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO_L1: quot[11]=1244, quot_offset[11]= 260
[ 0.622788] [4: kworker/u16:0: 6] cpr3_regulator_init_ctrl: apc0: Default CPR mode = full HW closed-loop
[ 0.624429] [4: kworker/u16:0: 6] cprh_msm8998_kbss_read_fuse_data: apc1_perfcl_corner: speed bin = 2
[ 0.624460] [4: kworker/u16:0: 6] cprh_msm8998_kbss_read_fuse_data: apc1_perfcl_corner: CPR fusing revision = 3
[ 0.624713] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused LowSVS: open-loop= 626000 uV
[ 0.624737] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused SVS: open-loop= 626000 uV
[ 0.624758] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused NOM: open-loop= 738000 uV
[ 0.624778] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused TURBO_L1: open-loop= 946000 uV
[ 0.624827] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fuse corner 1 voltage=626000 uV < fuse corner 0 voltage=634000 uV; overriding: fuse corner 1 voltage=634000
[ 0.625053] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_target_quotients: apc1_perfcl_corner: fused LowSVS: quot[11]=1073
[ 0.625079] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_target_quotients: apc1_perfcl_corner: fused SVS: quot[11]=1073, quot_offset[11]= 0
[ 0.625103] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_target_quotients: apc1_perfcl_corner: fused NOM: quot[11]=1370, quot_offset[11]= 295
[ 0.625127] [4: kworker/u16:0: 6] cprh_msm8998_kbss_calculate_target_quotients: apc1_perfcl_corner: fused TURBO_L1: quot[11]=1806, quot_offset[11]= 435
[ 0.629810] [4: kworker/u16:0: 6] cpr3_regulator_init_ctrl: apc1: Default CPR mode = full HW closed-loop
[ 0.631336] [4: kworker/u16:0: 6] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 2
[ 0.631366] [4: kworker/u16:0: 6] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
[ 0.632101] [4: kworker/u16:0: 6] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 526000 uV
[ 0.632125] [4: kworker/u16:0: 6] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 648000 uV
[ 0.632146] [4: kworker/u16:0: 6] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 792000 uV
[ 0.632166] [4: kworker/u16:0: 6] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 974000 uV
[ 0.632533] [4: kworker/u16:0: 6] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
[ 0.635151] [4: kworker/u16:0: 6] i2c-msm-v2 c179000.i2c: probing driver i2c-msm-v2
[ 0.635335] [4: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.635361] [4: kworker/u16:0: 6] i2c-msm-v2 c179000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.636359] [0: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.637086] [0: kworker/u16:0: 6] i2c-msm-v2 c17a000.i2c: probing driver i2c-msm-v2
[ 0.637166] [0: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.637173] [0: kworker/u16:0: 6] i2c-msm-v2 c17a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.637446] [0: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.637508] [0: kworker/u16:0: 6] i2c i2c-6: of_i2c: modalias failure on /soc/i2c@c17a000/drv2624@5A
[ 0.638002] [0: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 0.638010] [0: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 0.638056] [0: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 0.638063] [0: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 0.638089] [0: kworker/u16:0: 6] i2c-msm-v2 c1b5000.i2c: probing driver i2c-msm-v2
[ 0.638140] [0: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.638147] [0: kworker/u16:0: 6] i2c-msm-v2 c1b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[ 0.638437] [0: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 0.638444] [0: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 0.638492] [0: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 0.638499] [0: kworker/u16:0: 6] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 0.638610] [0: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.639027] [0: kworker/u16:0: 6] i2c-msm-v2 c1b6000.i2c: probing driver i2c-msm-v2
[ 0.639079] [0: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.639085] [0: kworker/u16:0: 6] i2c-msm-v2 c1b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[ 0.639184] [0: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.639529] [0: kworker/u16:0: 6] i2c-msm-v2 c1b7000.i2c: probing driver i2c-msm-v2
[ 0.639580] [0: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.639586] [0: kworker/u16:0: 6] i2c-msm-v2 c1b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[ 0.639862] [0: kworker/u16:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.640636] [0: kworker/u16:0: 6] gfx3d_clk_src: set OPP pair(180000000 Hz: 588000 uV) on 5000000.qcom,kgsl-3d0
[ 0.641108] [0: kworker/u16:0: 6] gfx3d_clk_src: set OPP pair(710000000 Hz: 976000 uV) on 5000000.qcom,kgsl-3d0
[ 0.653745] [0: kworker/u16:0: 6] qcom,gfxcc-8998 5065000.qcom,gfxcc: Completed registering all GPU clocks
[ 0.655616] [0: kworker/u16:0: 6] cpu-clock-osm 179c0000.qcom,cpu-clock-8998: using pwrcl speed bin 0 and pvs_ver 0
[ 0.655639] [0: kworker/u16:0: 6] cpu-clock-osm 179c0000.qcom,cpu-clock-8998: using perfcl speed bin 2 and pvs_ver 0
[ 0.659575] [0: kworker/u16:0: 6] add_opp: Set OPP pair (300000000 Hz, 624000 uv) on cpu0
[ 0.660685] [0: kworker/u16:0: 6] add_opp: Set OPP pair (1900800000 Hz, 860000 uv) on cpu0
[ 0.660772] [0: kworker/u16:0: 6] add_opp: Set OPP pair (300000000 Hz, 624000 uv) on cpu1
[ 0.661938] [0: kworker/u16:0: 6] add_opp: Set OPP pair (1900800000 Hz, 860000 uv) on cpu1
[ 0.661993] [0: kworker/u16:0: 6] add_opp: Set OPP pair (300000000 Hz, 624000 uv) on cpu2
[ 0.663125] [0: kworker/u16:0: 6] add_opp: Set OPP pair (1900800000 Hz, 860000 uv) on cpu2
[ 0.663213] [0: kworker/u16:0: 6] add_opp: Set OPP pair (300000000 Hz, 624000 uv) on cpu3
[ 0.664348] [0: kworker/u16:0: 6] add_opp: Set OPP pair (1900800000 Hz, 860000 uv) on cpu3
[ 0.664415] [0: kworker/u16:0: 6] add_opp: Set OPP pair (300000000 Hz, 632000 uv) on cpu4
[ 0.665978] [0: kworker/u16:0: 6] add_opp: Set OPP pair (2361600000 Hz, 1000000 uv) on cpu4
[ 0.666033] [0: kworker/u16:0: 6] add_opp: Set OPP pair (300000000 Hz, 632000 uv) on cpu5
[ 0.667579] [0: kworker/u16:0: 6] add_opp: Set OPP pair (2361600000 Hz, 1000000 uv) on cpu5
[ 0.667667] [0: kworker/u16:0: 6] add_opp: Set OPP pair (300000000 Hz, 632000 uv) on cpu6
[ 0.669215] [0: kworker/u16:0: 6] add_opp: Set OPP pair (2361600000 Hz, 1000000 uv) on cpu6
[ 0.669280] [0: kworker/u16:0: 6] add_opp: Set OPP pair (300000000 Hz, 632000 uv) on cpu7
[ 0.670834] [0: kworker/u16:0: 6] add_opp: Set OPP pair (2361600000 Hz, 1000000 uv) on cpu7
[ 0.671355] [0: kworker/u16:0: 6] cpu_clock_osm_driver_probe: OSM driver inited
[ 0.671443] [0: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[ 0.671592] [0: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
[ 0.671603] [0: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
[ 0.671837] [0: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: probe_freq_mitigation:Failed reading node=/soc/qcom,msm-thermal, key=qcom,limit-temp. err=-22. KTM continues
[ 0.671847] [0: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
[ 0.671859] [0: kworker/u16:0: 6] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
[ 0.673181] [0: swapper/0: 1] initcall deferred_probe_initcall+0x0/0x90 returned 0 after 185546 usecs
[ 0.673195] [0: swapper/0: 1] of_platform_default_populate_init()
[ 0.677251] [0: swapper/0: 1] console [pstore-1] enabled
[ 0.677314] [0: swapper/0: 1] pstore: Registered ramoops as persistent store backend
[ 0.677323] [0: swapper/0: 1] ramoops: attached 0x100000@0x84f00000, ecc: 0/0
[ 0.688279] [0: swapper/0: 1] sec_getlog_supply_kloginfo: 0xffffffc0f9e15ab0
[ 0.688335] [0: swapper/0: 1] printk_remap_nocache: nocache_base printk virtual addrs 0xffffff800b400000 phy=0x85200000
[ 0.934624] [0: swapper/0: 1] printk_remap_nocache: saved old log at 450881@ffffffc0f7f00000
[ 0.934739] [0: swapper/0: 1] initcall printk_remap_nocache+0x0/0x200 returned 0 after 214843 usecs
[ 0.948878] [0: swapper/0: 1] ACPI: Interpreter disabled.
[ 0.949388] [0: swapper/0: 1] KPI: Linux loader start count = 57224
[ 0.949465] [0: swapper/0: 1] KPI: Kernel start count = 101340
[ 0.949537] [0: swapper/0: 1] KPI: Bootloader load kernel count = 2952
[ 0.949616] [0: swapper/0: 1] KPI: Kernel MPM timestamp = 138733
[ 0.949690] [0: swapper/0: 1] KPI: Kernel MPM Clock frequency = 32768
[ 0.949778] [0: swapper/0: 1] socinfo_print: v0.11, id=292, ver=2.1, raw_id=94, raw_ver=2, hw_plat=8, hw_plat_ver=65536
[ 0.949778] [0: swapper/0: 1] accessory_chip=0, hw_plat_subtype=0, pmic_model=65556, pmic_die_revision=131072 foundry_id=3 serial_number=1679588085 num_pmics=2
[ 0.950044] [0: swapper/0: 1] msm_bus_fabric_init_driver
[ 0.950610] [0: swapper/0: 1] msm_bus_device 1620000.ad-hoc-bus: Coresight support absent for bus: 6146
[ 0.950864] [0: swapper/0: 1] msm_bus_device 1620000.ad-hoc-bus: Coresight support absent for bus: 6147
[ 0.951023] [0: swapper/0: 1] msm_bus_device 1620000.ad-hoc-bus: Coresight support absent for bus: 0
[ 0.951179] [0: swapper/0: 1] msm_bus_device 1620000.ad-hoc-bus: Coresight support absent for bus: 5120
[ 0.951512] [0: swapper/0: 1] msm_bus_device 1620000.ad-hoc-bus: Coresight support absent for bus: 2048
[ 0.951675] [0: swapper/0: 1] msm_bus_device 1620000.ad-hoc-bus: Coresight support absent for bus: 1024
[ 0.951831] [0: swapper/0: 1] msm_bus_device 1620000.ad-hoc-bus: Coresight support absent for bus: 2049
[ 0.972275] [0: swapper/0: 1] msm_bus_dev_init_qos: Skipping QOS init for 1
[ 0.972401] [0: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
[ 0.972531] [0: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
[ 0.972666] [0: swapper/0: 1] fab-mnoc supply clk-mdss-ahb-no-rate not found, using dummy regulator
[ 0.972864] [0: swapper/0: 1] fab-mnoc supply clk-mdss-axi-no-rate not found, using dummy regulator
[ 0.973012] [0: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
[ 0.973143] [0: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
[ 0.973271] [0: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
[ 0.973399] [0: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
[ 0.973527] [0: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
[ 0.973680] [0: swapper/0: 1] msm_bus_dev_init_qos: Skipping QOS init for 727
[ 0.975521] [0: swapper/0: 1] vgaarb: loaded
[ 0.975588] [0: swapper/0: 1] sm5720:sm5720_i2c_init
[ 0.976524] [0: swapper/0: 1] SCSI subsystem initialized
[ 0.977114] [0: swapper/0: 1] usbcore: registered new interface driver usbfs
[ 0.977234] [0: swapper/0: 1] usbcore: registered new interface driver hub
[ 0.977580] [2: swapper/0: 1] usbcore: registered new device driver usb
[ 0.977872] [2: swapper/0: 1] soc:usb_nop_phy supply vcc not found, using dummy regulator
[ 0.978435] [2: swapper/0: 1] [Input Booster] input_booster_init ndevice_in_dt : 8
[ 0.978532] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEY
[ 0.978626] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1
[ 0.978737] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : TOUCHKEY
[ 0.978835] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 1
[ 0.978931] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : TOUCH
[ 0.979025] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 3
[ 0.979126] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MULTITOUCH
[ 0.979224] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.979336] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : KEYBOARD
[ 0.979434] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.979531] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MOUSE
[ 0.979626] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.979725] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : MOUSE WHEEL
[ 0.979823] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.979921] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->label : PEN HOVER
[ 0.980018] [2: swapper/0: 1] [Input Booster] input_booster_init dt_infor->nlevels : 2
[ 0.980681] [2: swapper/0: 1] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[ 0.980858] [2: swapper/0: 1] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[ 0.981093] [2: swapper/0: 1] (NULL device *): switch_powerkey is set for 116
[ 0.981329] [2: swapper/0: 1] input: qpnp_pon as /devices/virtual/input/input0
[ 0.992520] [2: swapper/0: 1] [sec_input] PMIC input: code=114, sts=0x4
[ 0.992661] [2: swapper/0: 1] sec_debug_check_crash_key code 114 value 0 state 0 enable 0
[ 0.994230] [2: swapper/0: 1] s2dos03_regulator_probe: <s2dos03> probe start
[ 1.009454] [2: swapper/0: 1] s2dos03_regulator_probe: <s2dos03> probe end
[ 1.009547] [2: swapper/0: 1] i2c-gpio soc:i2c@21: using pins 133 (SDA) and 128 (SCL)
[ 1.010271] [2: swapper/0: 1] s2abb01_regulator_probe: s2abb01 probe++
[ 1.010350] [2: swapper/0: 1] s2abb01_regulator_probe: s2abb01 s2abb01_reg_parse_dt
[ 1.010499] [2: swapper/0: 1] s2abb01_regulator_probe: s2abb01 num_regulators : 2
[ 1.011553] [2: swapper/0: 1] s2abb01_reg_set_adchg: +s2abb01_reg_set_adchg
[ 1.015145] [2: swapper/0: 1] s2abb01_reg_set_adchg: +s2abb01_reg_set_adchg
[ 1.015910] [2: swapper/0: 1] s2abb01_reg_set_alwayson: ##val:0xC0
[ 1.015985] [2: swapper/0: 1] s2abb01_regulator_probe: s2abb01 Enable BB_EN again
[ 1.016458] [2: swapper/0: 1] s2abb01_regulator_probe: s2abb01 Before : 0xc0
[ 1.017220] [2: swapper/0: 1] s2abb01_regulator_probe: s2abb01 After : 0xc0
[ 1.017301] [2: swapper/0: 1] s2abb01_regulator_probe: s2abb01 probe--
[ 1.017387] [2: swapper/0: 1] i2c-gpio soc:i2c@1: using pins 26 (SDA) and 29 (SCL)
[ 1.017845] [2: swapper/0: 1] i2c-gpio soc:i2c@14: using pins 93 (SDA) and 94 (SCL)
[ 1.018531] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 1.018627] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 1.018748] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 1.018844] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 1.018958] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 1.019054] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 1.019174] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 1.019270] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 1.019458] [2: swapper/0: 1] sm5720:sm5720_i2c_probe
[ 1.019534] [2: swapper/0: 1] of_sm5720_dt: irq: 352
[ 1.020507] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 1.020602] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 1.020722] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 1.020820] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 1.020934] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 1.021029] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 1.021149] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: function 'NA' not supported
[ 1.021244] [2: swapper/0: 1] msm8998-pinctrl 3400000.pinctrl: invalid function NA in map table
[ 1.021353] [2: swapper/0: 1] sm5720:sm5720_i2c_probe sm5720 pinctrl is succeed.
[ 1.170927] [2: swapper/0: 1] sm5720_get_device_ID: revision=14
[ 1.171019] [2: swapper/0: 1] sm5720: sm5720_i2c_probe done (rev:14)
[ 1.171121] [2: swapper/0: 1] i2c-gpio soc:i2c@13: using pins 119 (SDA) and 40 (SCL)
[ 1.171763] [2: swapper/0: 1] i2c-gpio soc:i2c@18: using pins 62 (SDA) and 63 (SCL)
[ 1.172392] [2: swapper/0: 1] i2c-gpio soc:i2c@20: using pins 99 (SDA) and 100 (SCL)
[ 1.172659] [7:irq/352-sm5720-: 71] sm5720_get_device_ID: revision=14
[ 1.173051] [2: swapper/0: 1] [pcal6524_gpio_probe]
[ 1.173357] [2: swapper/0: 1] [pcal6524_parse_dt] Pull reg P0[0x0000] P1[0x0000] P2[0x0000]
[ 1.173456] [2: swapper/0: 1] [pcal6524_parse_dt] initialize reg 0xffffff 0x000000 0x000000 0x000000
[ 1.173559] [2: swapper/0: 1] [pcal6524_parse_dt]gpio_start=[300]ngpio=[24]reset-gpio=[108]
[ 1.173797] [2: swapper/0: 1] pcal6524_power_ctrl: gpio expander 1.8V on is finished.
[ 1.173890] [2: swapper/0: 1] [pcal6524 gpio expander] pcal6524_power_ctrl enable(1)
[ 1.192577] [2: swapper/0: 1] [pcal6524_reset_chip]: gpio expander reset.
[ 1.192665] [2: swapper/0: 1] [pcal6524_gpio_setup] GPIO Expander Init setting
[ 1.200191] [2: swapper/0: 1] [pcal6524_gpio_probe]Expander setup success [0]
[ 1.200349] [2: swapper/0: 1] pcal6524-gpio 22-0022: gpios 300..323 on a gpio-expander
[ 1.200499] [2: swapper/0: 1] i2c-gpio soc:i2c@22: using pins 96 (SDA) and 69 (SCL)
[ 1.200993] [2: swapper/0: 1] i2c-gpio soc:i2c@17: using pins 115 (SDA) and 136 (SCL)
[ 1.201194] [2: swapper/0: 1] initcall i2c_gpio_init+0x0/0x50 returned 0 after 205078 usecs
[ 1.201293] [2: swapper/0: 1] media: Linux media interface: v0.10
[ 1.201396] [2: swapper/0: 1] Linux video capture interface: v2.00
[ 1.202042] [2: swapper/0: 1] cpufreq_limit_set_table: max freq of big: 2361600
[ 1.202504] [2: swapper/0: 1] msm-cpufreq soc:qcom,msm-cpufreq: Fail to get cpufreq-boot-limit node
[ 1.203429] [2: swapper/0: 1] cpufreq: driver msm up and running
[ 1.204069] [2: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
[ 1.204565] [2: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
[ 1.204938] [2: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@30: assigned reserved memory node camera_mem_region@0xC0000000
[ 1.205396] [2: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@17: assigned reserved memory node secure_camera_region
[ 1.205798] [2: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@18: assigned reserved memory node secure_camera_scratch_region
[ 1.206114] [2: swapper/0: 1] ION heap system created
[ 1.206289] [2: swapper/0: 1] ION heap adsp created at 0x00000000f6800000 with size 800000
[ 1.210173] [2: swapper/0: 1] ION heap qsecom created at 0x00000000fce00000 with size 1400000
[ 1.210338] [2: swapper/0: 1] ION heap secure_display created at 0x00000000f7000000 with size 5c00000
[ 1.210439] [2: swapper/0: 1] ION heap secure_heap created
[ 1.238792] [4: swapper/0: 1] ION heap camera_preview created at 0x00000000c0000000 with size 11800000
[ 1.238998] [4: swapper/0: 1] ION heap secure_camera created at 0x00000000fe400000 with size 1400000
[ 1.239094] [4: swapper/0: 1] ION heap secure_camera_scratch created at 0x00000000fe200000 with size 200000
[ 1.239502] [4: swapper/0: 1] PMIC@SID0: PM8998 v2.0 options: 0, 0, 0, 0
[ 1.239647] [4: swapper/0: 1] PMIC@SID4: PM8005 v2.0 options: 0, 0, 0, 0
[ 1.240283] [4: swapper/0: 1] ipa ipa_smmu_wlan_cb_probe:5016 could not alloc iommu domain
[ 1.240434] [4: swapper/0: 1] IPA smmu_info.s1_bypass=1 smmu_info.fast_map=0
[ 1.240805] [4: swapper/0: 1] ipa ipa_smmu_wlan_cb_probe:5016 could not alloc iommu domain
[ 1.241900] [4: swapper/0: 1] gdsc_vfe0: supplied by gdsc_camss_top
[ 1.242074] [4: swapper/0: 1] gdsc_vfe1: supplied by gdsc_camss_top
[ 1.242245] [4: swapper/0: 1] gdsc_cpp: supplied by gdsc_camss_top
[ 1.242610] [4: swapper/0: 1] gdsc_gpu_gx: supplied by gfx_corner
[ 1.243179] [4: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 1.243256] [4: swapper/0: 1] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[ 1.265457] [4: swapper/0: 1] dp_pll_lock_status: dp_pll_lock_status: C_READY status is not high. Status=0
[ 1.266554] [4: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[ 1.266631] [4: swapper/0: 1] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
[ 1.269236] [4: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS DP PLL
[ 1.270385] [4: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
[ 1.286513] [4: swapper/0: 1] arm-smmu cd00000.arm,smmu-mmss: found 20 context interrupt(s) but have 17 context banks. assuming 17 context interrupts.
[ 1.291238] [4: swapper/0: 1] iommu: Adding device soc:usb_audio_qmi_dev to group 0
[ 1.291383] [4: swapper/0: 1] iommu: Adding device 1c00000.qcom,pcie to group 1
[ 1.291505] [4: swapper/0: 1] iommu: Adding device 18800000.qcom,icnss to group 2
[ 1.291658] [4: swapper/0: 1] iommu: Adding device soc:iommu_test_device to group 3
[ 1.292070] [4: swapper/0: 1] iommu: Adding device soc:qcom,msm-audio-ion to group 4
[ 1.292618] [4: swapper/0: 1] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 5
[ 1.292719] [4: swapper/0: 1] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 6
[ 1.292815] [4: swapper/0: 1] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 7
[ 1.293200] [4: swapper/0: 1] muic_notifier_header_init
[ 1.293289] [4: swapper/0: 1] [SENSORS CLASS] sensors_class_init
[ 1.293438] [4: swapper/0: 1] input: meta_event as /devices/virtual/input/input1
[ 1.293519] [4: swapper/0: 1] [SENSORS CLASS] sensors_class_init succcess
[ 1.293594] [4: swapper/0: 1] fingerprint_class_init
[ 1.293675] [4: swapper/0: 1] Advanced Linux Sound Architecture Driver Initialized.
[ 1.293973] [4: swapper/0: 1] Bluetooth: ffffffc0f964fd10
[ 1.294041] [4: swapper/0: 1] NET: Registered protocol family 31
[ 1.294107] [4: swapper/0: 1] Bluetooth: ffffffc0f964fd10
[ 1.294168] [4: swapper/0: 1] Bluetooth: ffffffc0f964fcf0Bluetooth: ffffffc0f964fcc0
[ 1.294259] [4: swapper/0: 1] Bluetooth: ffffffc0f964fcd0regulatory is not upadted via queue_regulatory_request.
[ 1.294559] [4: swapper/0: 1] NetLabel: Initializing
[ 1.294617] [4: swapper/0: 1] NetLabel: domain hash size = 128
[ 1.294681] [4: swapper/0: 1] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.294770] [4: swapper/0: 1] NetLabel: unlabeled traffic allowed by default
[ 1.294875] [4: swapper/0: 1] pcie:pcie_init.
[ 1.295771] [4: swapper/0: 1] 1c00000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
[ 1.295979] [4: swapper/0: 1] 1c00000.qcom,pcie supply gdsc-smmu not found, using dummy regulator
[ 1.296476] [4: swapper/0: 1] msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
[ 1.299728] [2: kworker/u16:0: 6] ipa ipa3_uc_state_check:302 uC interface not initialized
[ 1.301934] [2: kworker/u16:0: 6] ipa ipa3_set_resorce_groups_min_max_limits:3357 skip configuring ipa_rx_hps_clients from HLOS
[ 1.303652] [4: swapper/0: 1] sec_debug_summary_init: SMEM_ID_VENDOR0=0x88 size=0x44c0
[ 1.303810] [4: swapper/0: 1] sec_debug_summary_init: apss(86006a10) rpm(86007f30) modem(86008ef0) dsps(86009ed0)
[ 1.304001] [4: swapper/0: 1] sec_debug_core_reg_paddr = 0x81950850
[ 1.304116] [4: swapper/0: 1] cpu_data_paddr = 0x177d0f600
[ 1.304217] [4: swapper/0: 1] cpu_buf_paddr = 0x177d24000
[ 1.305027] [4: swapper/0: 1] clocksource: Switched to clocksource arch_sys_counter
[ 1.325468] [4: swapper/0: 1] pnp: PnP ACPI: disabled
[ 1.325818] [4: swapper/0: 1] s2mpb02:s2mpb02_i2c_init
[ 1.325960] [4: swapper/0: 1] <s2mpb02_i2c_probe> start
[ 1.326052] [4: swapper/0: 1] of_s2mpb02_dt: get dt data from /soc/i2c@1/s2mpb02@59
[ 1.326176] [4: swapper/0: 1] of_s2mpb02_dt: use default mfd cells
[ 1.326663] [4: swapper/0: 1] s2mpb02_i2c_probe: device id 0x0 is found
[ 1.326919] [4: swapper/0: 1] <s2mpb02_pmic_probe> start
[ 1.327451] [4: swapper/0: 1] [/home/dpi/qb5_8814/workspace/DREAMQLTE_USA_SINGLE/android/kernel/drivers/regulator/s2mpb02-regulator.c:381] pdata->num_regulators:21
[ 1.352113] [4: swapper/0: 1] s2m_enable: s2mpb02-buck1
[ 1.355027] [4: swapper/0: 1] s2m_enable: s2mpb02-bb
[ 1.356454] [4: swapper/0: 1] <s2mpb02_pmic_probe> end
[ 1.356548] [4: swapper/0: 1] <s2mpb02_i2c_probe> end
[ 1.356671] [4: swapper/0: 1] __init_sec_tsp_log: sec_debug is not enabled, return!!
[ 1.357564] [4: swapper/0: 1] NET: Registered protocol family 2
[ 1.358049] [4: swapper/0: 1] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.358286] [4: swapper/0: 1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.358643] [4: swapper/0: 1] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.358825] [4: swapper/0: 1] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.358978] [4: swapper/0: 1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.359223] [4: swapper/0: 1] NET: Registered protocol family 1
[ 1.359353] [4: swapper/0: 1] PCI: CLS 0 bytes, default 128
[ 1.359853] [4: swapper/0: 1] Trying to unpack rootfs image as initramfs...
[ 1.450745] [4: swapper/0: 1] Freeing initrd memory: 6948K (ffffffc003400000 - ffffffc003ac9000)
[ 1.451899] [4: swapper/0: 1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.454939] [4: swapper/0: 1] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 1.455254] [4: swapper/0: 1] audit: initializing netlink subsys (enabled)
[ 1.456984] [4: swapper/0: 1] vmscan: error setting kswapd cpu affinity mask
[ 1.460203] [5: swapper/0: 1] Registering sdcardfs 3.2.1
[ 1.460547] [5: swapper/0: 1] [SDFAT] Filesystem version 1.3.18
[ 1.461017] [5: swapper/0: 1] fuse init (API version 7.23)
[ 1.461449] [5: swapper/0: 1] ss_platform_log: attached 0x400000@0x84b00000
[ 1.461632] [5: swapper/0: 1] ss_platform_log: logger buffer alloc address: 0xffffff800a902000
[ 1.461798] [5: swapper/0: 1] SELinux: Registering netfilter hooks
[ 1.462150] [5: swapper/0: 1] pfk_ecryptfs [pfk_ecryptfs_init]: PFK ecryptfs inited successfully
[ 1.462296] [5: swapper/0: 1] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
[ 1.462434] [5: swapper/0: 1] pfk [pfk_init]: Driver initialized successfully
[ 1.462584] [5: swapper/0: 1] tima_uevent_init
[ 1.462699] [5: swapper/0: 1] TIMA uevent driver (tima_uevent) is initialized.
[ 1.462827] [5: swapper/0: 1] [MST] mst_drv_init
[ 1.463622] [5: swapper/0: 1] [MST] mst_ldo_device_probe init start
[ 1.463870] [5: swapper/0: 1] pcal6524_gpio_request gpio 4
[ 1.463975] [5: swapper/0: 1] pcal6524_gpio_direction_output(off=[4], val=[0])
[ 1.464919] [5: swapper/0: 1] [MST] sec_mst_gpio_init : Send Output
[ 1.465114] [5: swapper/0: 1] [MST] MST drv driver (mst_drv) is initialized.
[ 1.465285] [5: swapper/0: 1] [MST] MST_LDO_DRV]]] init , ret val : 0
[ 1.465461] [5: swapper/0: 1] key_dump feature not availabledek: initialized
[ 1.465592] [5: swapper/0: 1] SDP_MM: entering************************************************
[ 1.465761] [5: swapper/0: 1] SDP_PUB_CRYPTO[1] : pub_crypto_mod_init netlink socket is created successfully!
[ 1.465968] [5: swapper/0: 1] SDP_FS_HANDLER[1] : sdp_fs_handler_mod_init netlink socket is created successfully!
[ 1.466152] [5: swapper/0: 1] DLP: dlp_ioctl initialized
[ 1.466245] [5: swapper/0: 1] iccc_init:
[ 1.466319] [5: swapper/0: 1] iccc_init: registered /proc/iccc_ready interface
[ 1.487545] [5: swapper/0: 1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.487692] [5: swapper/0: 1] io scheduler noop registered
[ 1.487789] [5: swapper/0: 1] io scheduler deadline registered
[ 1.487944] [5: swapper/0: 1] io scheduler cfq registered (default)
[ 1.488051] [5: swapper/0: 1] io scheduler test-iosched registered
[ 1.490182] [5: swapper/0: 1] vbus_notifier_init
[ 1.490489] [5: swapper/0: 1] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
[ 1.490622] [5: swapper/0: 1] mdss_mdp_probe+0x224/0x13dc->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
[ 1.490904] [5: swapper/0: 1] mdss_mdp_irq_clk_setup: smmu gdsc regulator found
[ 1.491571] [5: swapper/0: 1] No change in context(0==0), skip
[ 1.492674] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
[ 1.492834] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
[ 1.492994] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
[ 1.493152] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
[ 1.493330] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:0 ndx:0x40 prio:4
[ 1.493488] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:1 ndx:0x40 prio:4
[ 1.493646] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:0 ndx:0x80 prio:5
[ 1.493807] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:1 ndx:0x80 prio:5
[ 1.493963] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:0 ndx:0x1000 prio:6
[ 1.494127] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:1 ndx:0x1000 prio:6
[ 1.494287] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:13 num:13 rect:0 ndx:0x2000 prio:7
[ 1.494452] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:13 num:13 rect:1 ndx:0x2000 prio:7
[ 1.494620] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:2 num:10 rect:0 ndx:0x400 prio:0
[ 1.494779] [5: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:10 num:11 rect:0 ndx:0x800 prio:1
[ 1.494945] [5: swapper/0: 1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[ 1.495194] [5: swapper/0: 1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[ 1.495708] [5: swapper/0: 1] xlog_status: enable:1, panic:1, dump:2
[ 1.496082] [5: swapper/0: 1] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 8
[ 1.496359] [5: swapper/0: 1] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 9
[ 1.496617] [5: swapper/0: 1] mdss_mdp_probe: mdss version = 0x30000001, bootloader display is on
[ 1.497415] [5: swapper/0: 1] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
[ 1.497673] [5: swapper/0: 1] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
[ 1.498194] [5: swapper/0: 1] mdss_dsi_get_dt_vreg_data: gdsc min=0, max=0, enable=0, disable=0, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
[ 1.498413] [5: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vdda-1p2 min=1200000, max=1200000, enable=12560, disable=4, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
[ 1.498656] [5: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vdda-0p9 min=880000, max=880000, enable=73400, disable=32, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
[ 1.499044] [5: swapper/0: 1] [MDSS] check_valid_ctrl : Invalid vdd_data : 0x0
[ 1.499581] [5: swapper/0: 1] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[ 1.499842] [5: swapper/0: 1] mdss_dsi_pinctrl_init: can not get default pinstate
[ 1.499967] [5: swapper/0: 1] mdss_dsi_pinctrl_init: can not get sleep pinstate
[ 1.500148] [5: swapper/0: 1] mdss_dsi_get_panel_cfg:707: cfg:[0:ss_dsi_panel_S6E3HA6_AMB577MQ01_WQHD:1:none:cfg:single_dsi]
[ 1.500330] [5: swapper/0: 1] mdss_dsi_find_panel_of_node: cmdline:0:ss_dsi_panel_S6E3HA6_AMB577MQ01_WQHD:1:none:cfg:single_dsi panel_name:ss_dsi_panel_S6E3HA6_AMB577MQ01_WQHD
[ 1.500722] [5: swapper/0: 1] mdss_dsi_panel_init:3043 ++
[ 1.500820] [5: swapper/0: 1] mdss_dsi_panel_init: Panel Name = ss_dsi_panel_S6E3HA6_AMB577MQ01_WQHD
[ 1.501038] [5: swapper/0: 1] mdss_dsi_panel_timing_from_dt: found new timing "wqhd" (ffffffc0f7abc000)
[ 1.501196] [5: swapper/0: 1] mdss_dsi_parse_roi_alignment: ROI alignment: [720, 720, 40, 40, 720, 40]
[ 1.501360] [5: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[ 1.501515] [5: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[ 1.501666] [5: swapper/0: 1] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
[ 1.501845] [5: swapper/0: 1] mdss_dsi_parse_topology_config: cfg_node name config_wqhd lm_split:720x720 pp_split:no
[ 1.502016] [5: swapper/0: 1] mdss_dsi_parse_dsc_params: num_enc:2 :slice h=40 w=720 s_pkt=1
[ 1.502149] [5: swapper/0: 1] mdss_dsi_parse_dsc_params: bpc=8 bpp=8
[ 1.502270] [5: swapper/0: 1] mdss_dsi_panel_timing_from_dt: found new timing "fhd" (ffffffc0f7abc338)
[ 1.502416] [5: swapper/0: 1] mdss_dsi_parse_roi_alignment: ROI alignment: [540, 540, 30, 30, 540, 30]
[ 1.502563] [5: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[ 1.502711] [5: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[ 1.502892] [5: swapper/0: 1] mdss_dsi_parse_topology_config: cfg_node name config_fhd lm_split:540x540 pp_split:no
[ 1.503056] [5: swapper/0: 1] mdss_dsi_parse_dsc_params: num_enc:2 :slice h=30 w=540 s_pkt=1
[ 1.503187] [5: swapper/0: 1] mdss_dsi_parse_dsc_params: bpc=8 bpp=8
[ 1.503302] [5: swapper/0: 1] mdss_dsi_panel_timing_from_dt: found new timing "hd" (ffffffc0f7abc670)
[ 1.503445] [5: swapper/0: 1] mdss_dsi_parse_roi_alignment: ROI alignment: [360, 360, 74, 74, 360, 74]
[ 1.503590] [5: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[ 1.503735] [5: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[ 1.503914] [5: swapper/0: 1] mdss_dsi_parse_topology_config: cfg_node name config_hd lm_split:360x360 pp_split:no
[ 1.504073] [5: swapper/0: 1] mdss_dsi_parse_dsc_params: num_enc:2 :slice h=74 w=360 s_pkt=1
[ 1.504205] [5: swapper/0: 1] mdss_dsi_parse_dsc_params: bpc=8 bpp=8
[ 1.504314] [5: swapper/0: 1] mdss_dsi_panel_timing_switch: ndx=0 switching to panel timing "wqhd"
[ 1.504500] [5: swapper/0: 1] mdss_dsi_parse_partial_update_caps: partial_update_enabled=1
[ 1.504636] [5: swapper/0: 1] mdss_dsi_parse_panel_features: ulps feature enabled
[ 1.504758] [5: swapper/0: 1] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[ 1.504899] [5: swapper/0: 1] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[ 1.505078] [5: swapper/0: 1] No valid panel-status-check-mode string
[ 1.505196] [5: swapper/0: 1] mdss_dsi_set_refresh_rate_range:2359, Unable to read min refresh rate
[ 1.505339] [5: swapper/0: 1] mdss_dsi_set_refresh_rate_range:2374, Unable to read max refresh rate
[ 1.505480] [5: swapper/0: 1] dyn_fps: min = 60, max = 60
[ 1.505574] [5: swapper/0: 1] mdss_dsi_panel_init:3070 --
[ 1.505675] [5: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vdd3 min=1800000, max=1800000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
[ 1.505904] [5: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vddr min=1600000, max=1600000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
[ 1.506131] [5: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vci min=3000000, max=3000000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
[ 1.514264] [5: swapper/0: 1] mdss_dsi_parse_ctrl_params:4306 Unable to read qcom,display-id, data=0000000000000000,len=20
[ 1.514462] [5: swapper/0: 1] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
[ 1.514635] [5: swapper/0: 1] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
[ 1.514782] [5: swapper/0: 1] mdss_dsi_retrieve_ctrl_resources+0x168/0x1e0->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
[ 1.514991] [5: swapper/0: 1] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800a5fa000 ctrl_size=400 phy_base=ffffff800a914400 phy_size=7c0
[ 1.515223] [5: swapper/0: 1] dsi_panel_device_register: Using default BTA for ESD check
[ 1.515848] [5: swapper/0: 1] dsi_panel_device_register: Continuous splash enabled
[ 1.516007] [5: swapper/0: 1] Unable to find fb node for device: c994000.qcom,mdss_dsi_ctrl0
[ 1.516242] [5: swapper/0: 1] mdss_register_panel: adding framebuffer device c994000.qcom,mdss_dsi_ctrl0
[ 1.516554] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_brightness_init : init done..
[ 1.516683] [5: swapper/0: 1] [MDSS] mdss_panel_init : ss_dsi_panel_S6E3HA6_AMB577MQ01_WQHD:1:none:cfg:single_dsi
[ 1.516985] [5: swapper/0: 1] [MDSS] copr_init : COPR enabled..
[ 1.517129] [5: swapper/0: 1] dpui_logging_register register type MDNIE
[ 1.517242] [5: swapper/0: 1] [MDSS] mdss_panel_attach_set : panel_attach_status : 1
[ 1.517376] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : LP11 init disabled
[ 1.517513] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : ESC CLK 128M disabled
[ 1.517648] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : alpm enable enabled
[ 1.517783] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : OSC TE fitting disabled
[ 1.517921] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : hmt enabled
[ 1.518044] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : tcon clk on support: disabled
[ 1.518193] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : tft_common_support disabled
[ 1.518339] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : backlight_gpio_config disabled
[ 1.518488] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3046, panel_extra_power gpio1 not specified
[ 1.518650] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3046, panel_extra_power gpio2 not specified
[ 1.518808] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3046, panel_extra_power gpio3 not specified
[ 1.518964] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3046, panel_extra_power gpio4 not specified
[ 1.519120] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3059, backlight_tft_gpio gpio1 not specified
[ 1.519277] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3059, backlight_tft_gpio gpio2 not specified
[ 1.519435] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3059, backlight_tft_gpio gpio3 not specified
[ 1.519593] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3059, backlight_tft_gpio gpio4 not specified
[ 1.519761] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : vdd->pac = 1
[ 1.519885] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : lpm_power_control enabled
[ 1.520026] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : lpm_power_control Name=vddr, Min=1500000, Max=1500000
[ 1.520188] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt_cmds : DSI0
[ 1.520306] [5: swapper/0: 1] mdss_dsi_parse_dcs_cmds: dcs_cmd=39 len=9 error!mdss_dsi_parse_dcs_cmds: dcs_cmd=39 len=9 error!
[ 1.520546] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,vint_map_table_revA
[ 1.520722] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_candella_mapping_table : Success to read table samsung,candela_map_table_revA
[ 1.520903] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_candella_mapping_table : tab_size (74), hbm min/max lv (0/255)
[ 1.521065] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_hbm_candella_mapping_table : Success to read table samsung,hbm_candela_map_table_revA
[ 1.521252] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_hbm_candella_mapping_table : tab_size (7), hbm min/max lv (282/365)
[ 1.521424] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_pac_candella_mapping_table : Success to read table samsung,pac_candela_map_table_revA
[ 1.521625] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_pac_candella_mapping_table : tab_size (512), hbm min/max lv (0/25500)
[ 1.521799] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_hbm_candella_mapping_table : Success to read table samsung,pac_hbm_candela_map_table_revA
[ 1.521996] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_hbm_candella_mapping_table : tab_size (7), hbm min/max lv (28200/36500)
[ 1.522175] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,acl_map_table_revA
[ 1.522497] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,smart_acl_elvss_map_table_revA
[ 1.522774] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,hmt_reverse_aid_map_table_revA
[ 1.522954] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_candella_mapping_table : Success to read table samsung,hmt_candela_map_table_revA
[ 1.523137] [5: swapper/0: 1] [MDSS] mdss_samsung_parse_candella_mapping_table : tab_size (37), hbm min/max lv (0/255)
[ 1.530516] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : hall_ic disabled
[ 1.530688] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt_esd : [ESD] gpio : 1010, irq : 518
[ 1.530845] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt_esd : samsung esd enable (1) mode (4)
[ 1.530999] [5: swapper/0: 1] dsi_panel_device_register: Panel data initialized
[ 1.534175] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_extra_power : ++ enable(1) ndx(0)
[ 1.534310] [5: swapper/0: 1] [MDSS] mdss_samsung_panel_extra_power : --
[ 1.535140] [4: swapper/0: 1] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x20000000, PHY rev:0x3
[ 1.535443] [4: swapper/0: 1] mdss_dsi_status_init: DSI status check interval:5000
[ 1.536198] [4: swapper/0: 1] mdss_dp_probe: +++
[ 1.536333] [4: swapper/0: 1] mdss_retrieve_dp_ctrl_resources: DP Driver base=ffffff800a918000 size=a84
[ 1.536494] [4: swapper/0: 1] mdss_dp_get_dt_vreg_data: vreg found. count=1
[ 1.536610] [4: swapper/0: 1] mdss_dp_get_dt_vreg_data: gdsc min=0, max=0, enable=0, disable=0
[ 1.536747] [4: swapper/0: 1] mdss_dp_get_dt_vreg_data: vreg found. count=1
[ 1.536862] [4: swapper/0: 1] mdss_dp_get_dt_vreg_data: vdda-1p2 min=1200000, max=1200000, enable=12560, disable=4
[ 1.537023] [4: swapper/0: 1] mdss_dp_get_dt_vreg_data: vreg found. count=1
[ 1.537137] [4: swapper/0: 1] mdss_dp_get_dt_vreg_data: vdda-0p9 min=880000, max=880000, enable=73400, disable=32
[ 1.537306] [4: swapper/0: 1] mdss_dp_get_dt_clk_data: Display-port clock parsing successful
[ 1.538448] [4: swapper/0: 1] mdss_dp_parse_gpio_params: mdss_dp_parse_gpio_params: aux_en(27), aux_sel(39), ccdir(38), hpd(80)
[ 1.538652] [4: swapper/0: 1] mdss_dp_request_gpios: hpd.valid
[ 1.538755] [4: swapper/0: 1] mdss_dp_config_gpios: enable(0)
[ 1.538883] [4: swapper/0: 1] dp_init_panel_info: frame_rate: 60
[ 1.538982] [4: swapper/0: 1] dp_init_panel_info: bpp=18
[ 1.539071] [4: swapper/0: 1] dp_init_panel_info: update res. vic= 1, pclk_rate = 25200000
[ 1.539314] [4: swapper/0: 1] mdss_register_panel: adding framebuffer device c990000.qcom,dp_ctrl
[ 1.539574] [4: swapper/0: 1] mdss_dp_device_register: dp initialized
[ 1.539681] [4: swapper/0: 1] hdmi_edid_config_override: invalid input
[ 1.539786] [4: swapper/0: 1] mdss_dp_probe: done
[ 1.539868] [4: swapper/0: 1] mdss_dp_calc_tu_settings: lclk = 540000000, ln_cnt = 4
[ 1.539991] [4: swapper/0: 1] mdss_dp_calc_tu_settings: ratio = 74971525, reminder = 24985600
[ 1.540124] [4: swapper/0: 1] mdss_dp_calc_tu_settings: ratio = 434430, reminder = 24985600
[ 1.540255] [4: swapper/0: 1] mdss_dp_calc_tu_settings: ratio = 434430
[ 1.540362] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=1000000, n_err=98240
[ 1.540522] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=98240, n_err=663810
[ 1.540680] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=98240, n_err=229380
[ 1.540838] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=98240, n_err=794950
[ 1.540997] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=98240, n_err=360520
[ 1.541154] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=98240, n_err=926090
[ 1.541309] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=98240, n_err=491660
[ 1.541465] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=98240, n_err=57230
[ 1.541619] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=57230, n_err=622800
[ 1.541774] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=57230, n_err=188370
[ 1.541940] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=57230, n_err=753940
[ 1.542104] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=57230, n_err=319510
[ 1.542269] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=57230, n_err=885080
[ 1.542431] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=57230, n_err=450650
[ 1.542594] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=57230, n_err=16220
[ 1.542757] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=581790
[ 1.542918] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=147360
[ 1.543079] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=712930
[ 1.543241] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=278500
[ 1.543403] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=844070
[ 1.543564] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=409640
[ 1.543728] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=975210
[ 1.543893] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=540780
[ 1.544058] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=106350
[ 1.544222] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=671920
[ 1.544387] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=237490
[ 1.544551] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=803060
[ 1.544717] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=368630
[ 1.544881] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=934200
[ 1.545077] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=499770
[ 1.545238] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=65340
[ 1.545399] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=630910
[ 1.545560] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info (dp_app_set.c): ratio=434430, err=16220, n_err=196480
[ 1.545724] [4: swapper/0: 1] mdss_dp_calc_tu_settings: Info: tu_size_desired = 46
[ 1.546268] [4: swapper/0: 1] msm_ext_disp_switch_dev_register: Display switch registration pass
[ 1.546479] [4: swapper/0: 1] msm_ext_disp_probe: msm_ext_disp_probe: Added child devices.
[ 1.546906] [4: swapper/0: 1] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
[ 1.547323] [4: swapper/0: 1] mdss_fb_probe: fb0: split_mode:1 left:720 right:720
[ 1.547994] [4: swapper/0: 1] mdss_fb_register: FrameBuffer[0] 1440x2960 registered successfully!
[ 1.548156] [4: swapper/0: 1] [MDSS_EVENT_FB_REGISTERED]
[ 1.548359] [4: swapper/0: 1] [MDSS] mdss_samsung_create_sysfs : Success to create sys/devices/svc svc : 0xffffffc0f7b83080
[ 1.548538] [4: swapper/0: 1] [MDSS] mdss_samsung_create_sysfs : Success to create panel sysfs svc/OCTA..
[ 1.548728] [4: swapper/0: 1] dpui_logging_register register type PANEL
[ 1.548842] [4: swapper/0: 1] [MDSS] mdss_samsung_create_sysfs : done!!
[ 1.548953] [4: swapper/0: 1] [MDSS] mdss_samsung_dsi_panel_registered : DSI0 success
[ 1.552819] [4: swapper/0: 1] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
[ 1.552987] [4: swapper/0: 1] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
[ 1.553135] [4: swapper/0: 1] mdss_dp_event_handler: event=MDSS_EVENT_FB_REGISTERED
[ 1.553274] [4: swapper/0: 1] mdss_dp_sysfs_create: sysfs created
[ 1.553613] [4: swapper/0: 1] hdcp_1x_init: HDCP module initialized. HDCP_STATE=HDCP_STATE_INACTIVE
[ 1.553759] [4: swapper/0: 1] mdss_dp_hdcp_init: HDCP 1.3 initialized
[ 1.553870] [4: swapper/0: 1] hdcp_library_register: tethered 0
[ 1.554200] [4: swapper/0: 1] mdss_dp_hdcp_init: HDCP 2.2 initialized
[ 1.554389] [4: swapper/0: 1] msm_ext_disp_get_intf_data: Display not found (EXT_DISPLAY_TYPE_DP)
[ 1.554530] [4: swapper/0: 1] msm_ext_disp_add_intf_data: Added new display (EXT_DISPLAY_TYPE_DP)
[ 1.554671] [4: swapper/0: 1] msm_ext_disp_register_intf: Display (EXT_DISPLAY_TYPE_DP) registered
[ 1.554962] [4: swapper/0: 1] mdss_mdp_splash_parse_dt: splash mem child node is not present
[ 1.555157] [4: swapper/0: 1] mdss_fb_probe: fb2: split_mode:0 left:0 right:0
[ 1.555311] [4: swapper/0: 1] mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
[ 1.555603] [4: swapper/0: 1] mdss_mdp_splash_parse_dt: splash mem child node is not present
[ 1.555750] [4: swapper/0: 1] [mdss] ss_spi_init : ++
[ 1.555848] [4: swapper/0: 1] [mdss] ss_spi_init : --
[ 1.555939] [4: swapper/0: 1] [MDSS] ss_dsi_active_clk_init : Active_Clock Init ++
[ 1.556092] [4: swapper/0: 1] [MDSS] ss_dsi_update_clock_image_to_cmd : ++
[ 1.556292] [4: swapper/0: 1] [MDSS] ss_dsi_update_clock_image_to_cmd : --
[ 1.556402] [4: swapper/0: 1] [MDSS] ss_dsi_active_clk_init : Active_Clock Init --
[ 1.560030] [4: swapper/0: 1] audio_notifer_reg_service: service SSR_MODEM is in use
[ 1.561486] [4: swapper/0: 1] subsys-pil-tz soc:qcom,ipa_fws@1e08000: for ipa_fws segments only will be dumped.
[ 1.562557] [4: swapper/0: 1] subsys-pil-tz cce0000.qcom,venus: for venus segments only will be dumped.
[ 1.562840] [4: swapper/0: 1] subsys-pil-tz soc:qcom,kgsl-hyp: for a540_zap segments only will be dumped.
[ 1.563532] [4: swapper/0: 1] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
[ 1.564253] [4: swapper/0: 1] msm-dcc 10b3000.dcc: DCC XPU is not specified
[ 1.565418] [4: swapper/0: 1] msm_rpmstats_create_sysfs: Cannot find module_kset
[ 1.566049] [4: swapper/0: 1] msm_rpm_log_probe: OK
[ 1.566733] [4: swapper/0: 1] Use HS driver for ATD
[ 1.566972] [4: swapper/0: 1] msm_serial: driver initialized
[ 1.567370] [4: swapper/0: 1] uart_tx_gpio is not available
[ 1.567466] [4: swapper/0: 1] uart_rx_gpio is not available
[ 1.567560] [4: swapper/0: 1] uart_cts_gpio is not available
[ 1.567656] [4: swapper/0: 1] uart_rfr_gpio is not available
[ 1.568340] [4: swapper/0: 1] sps: BAM device 0x000000000c144000 is not registered yet.
[ 1.568647] [4: swapper/0: 1] sps:BAM 0x000000000c144000 is registered.
[ 1.569998] [4: swapper/0: 1] (msm_serial_hs, id 1) HS Uart clock on
[ 1.570398] [4: swapper/0: 1] c170000.uart: ttyHS1 at MMIO 0xc170000 (irq = 347, base_baud = 460800) is a MSM HS UART
[ 1.571655] [4: swapper/0: 1] (msm_serial_hs, id 1) HS Uart clock off
[ 1.572043] [4: swapper/0: 1] uart_tx_gpio is not available
[ 1.572136] [4: swapper/0: 1] uart_rx_gpio is not available
[ 1.572229] [4: swapper/0: 1] uart_cts_gpio is not available
[ 1.572322] [4: swapper/0: 1] uart_rfr_gpio is not available
[ 1.572416] [4: swapper/0: 1] msm_hs_dt_to_pdata:Out of Band sleep flag is set
[ 1.572644] [4: swapper/0: 1] Wakeup irq not specified.
[ 1.574102] [4: swapper/0: 1] (msm_serial_hs, id 0) HS Uart clock on
[ 1.574488] [4: swapper/0: 1] c171000.uart: ttyHS0 at MMIO 0xc171000 (irq = 348, base_baud = 460800) is a MSM HS UART
[ 1.575744] [4: swapper/0: 1] (msm_serial_hs, id 0) HS Uart clock off
[ 1.575975] [4: swapper/0: 1] uart_tx_gpio is not available
[ 1.576070] [4: swapper/0: 1] uart_rx_gpio is not available
[ 1.576164] [4: swapper/0: 1] uart_cts_gpio is not available
[ 1.576259] [4: swapper/0: 1] uart_rfr_gpio is not available
[ 1.576451] [4: swapper/0: 1] Wakeup irq not specified.
[ 1.576559] [4: swapper/0: 1] muic_notifier_register: listener=8 register
[ 1.576672] [4: swapper/0: 1] (msm_serial_hs, id 8) msm_serial_handle_notification, act(0), dev(68)
[ 1.577006] [4: swapper/0: 1] sps: BAM device 0x000000000c184000 is not registered yet.
[ 1.577324] [4: swapper/0: 1] sps:BAM 0x000000000c184000 is registered.
[ 1.578563] [4: swapper/0: 1] (msm_serial_hs, id 8) HS Uart clock on
[ 1.578925] [4: swapper/0: 1] c1b0000.uart: ttyHS8 at MMIO 0xc1b0000 (irq = 19, base_baud = 460800) is a MSM HS UART
[ 1.580166] [4: swapper/0: 1] (msm_serial_hs, id 8) HS Uart clock off
[ 1.580386] [4: swapper/0: 1] msm_serial_hs module loaded
[ 1.593718] [4: swapper/0: 1] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 10
[ 1.594065] [4: swapper/0: 1] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 11
[ 1.664813] [4: swapper/0: 1] brd: module loaded
[ 1.668446] [4: swapper/0: 1] loop: module loaded
[ 1.668936] [4: swapper/0: 1] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
[ 1.669091] [4: swapper/0: 1] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[ 1.669225] [4: swapper/0: 1] QSEECOM: qseecom_probe: fde_key_size=1
[ 1.669331] [4: swapper/0: 1] QSEECOM: qseecom_probe: no-clock-support=0x1
[ 1.669443] [4: swapper/0: 1] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
[ 1.669769] [4: swapper/0: 1] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[ 1.670289] [4: swapper/0: 1] init tzic
[ 1.671029] [4: swapper/0: 1] tima_debug_log_read_init: Registering /proc/tima_debug_log Interface
[ 1.671248] [4: swapper/0: 1] sec_param_work_init: start
[ 1.671339] [4: swapper/0: 1] sec_param_work_init: end
[ 1.671431] [4: swapper/0: 1] dmverity_odin_flag_read_init:: Registering /proc/dmverity_odin_flag Interface
[ 1.671821] [4: swapper/0: 1] i2c-msm-v2 c1b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x10 (ok)
[ 1.672308] I[0: swapper/0: 0] i2c-msm-v2 c1b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:5 tx:2) mode:FIFO slv_addr:0x8 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.672606] [4: swapper/0: 1] I2C PMIC: i2c_pmic_determine_initial_status: Couldn't read irq data rc=-107
[ 1.672754] [4: swapper/0: 1] I2C PMIC: i2c_pmic_probe: Couldn't determine initial status rc=-107
[ 1.672929] [4: swapper/0: 1] i2c_pmic: probe of 7-0008 failed with error -107
[ 1.674957] [4: swapper/0: 1] qce 1de0000.qcedev: Qualcomm Crypto 5.3.4 device found @0x1de0000
[ 1.675160] [4: swapper/0: 1] qce 1de0000.qcedev: CE device = 0x0
[ 1.675160] [4: swapper/0: 1] , IO base, CE = 0xffffff800bb40000
[ 1.675160] [4: swapper/0: 1] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
[ 1.675160] [4: swapper/0: 1] IO base BAM = 0x (null)
[ 1.675160] [4: swapper/0: 1] BAM IRQ 48
[ 1.675160] [4: swapper/0: 1] Engines Availability = 0x2011053
[ 1.675939] [4: swapper/0: 1] sps:BAM 0x0000000001dc4000 is registered.
[ 1.676218] [4: swapper/0: 1] sps:BAM 0x0000000001dc4000 (va:0xffffff800bf80000) enabled: ver:0x27, number of pipes:16
[ 1.676621] [4: swapper/0: 1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000001dc4000 irq 48
[ 1.681888] [4: swapper/0: 1] Error: Driver 'qcrypto' is already registered, aborting...
[ 1.684508] [4: swapper/0: 1] qcom_ice_get_pdevice: found ice device ffffffc0f3ce4c00
[ 1.684636] [4: swapper/0: 1] qcom_ice_get_pdevice: matching platform device ffffffc0f7c5ec00
[ 1.685054] [4: swapper/0: 1] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
[ 1.685874] [4: swapper/0: 1] ufshcd-qcom 1da4000.ufshc: ufs_qcom_host_clk_get: failed to get tx_lane1_sync_clk err -2
[ 1.686390] [4: swapper/0: 1] scsi host0: ufshcd
[ 1.689643] [4: swapper/0: 1] qcom_ice 1db0000.ufsice: QC ICE 3.0.65 device found @0xffffff800b6f0000
[ 1.705634] [4: swapper/0: 1] SCSI Media Changer driver v0.25
[ 1.707967] [4: swapper/0: 1] sps:BAM 0x000000000c144000 (va:0xffffff800af80000) enabled: ver:0x19, number of pipes:18
[ 1.709763] [4: swapper/0: 1] sps:BAM 0x000000000c184000 (va:0xffffff800b980000) enabled: ver:0x19, number of pipes:18
[ 1.710188] [4: swapper/0: 1] [mdss] ss_spi_probe : ++
[ 1.710363] [4: swapper/0: 1] [MDSS] ss_spi_probe : clk(68) miso(66) mosi(65) cs1(49)
[ 1.710563] [4: swapper/0: 1] [mdss] ss_spi_probe : --
[ 1.711008] [4: swapper/0: 1] msm_spi_probe: disable bam for BLSP tzspi, spi num(12)
[ 1.711144] [4: swapper/0: 1] fp_spi_clock_get sucess
[ 1.711656] [4: swapper/0: 1] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 1.712834] [4: swapper/0: 1] tun: Universal TUN/TAP device driver, 1.6
[ 1.712941] [4: swapper/0: 1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.713112] [4: swapper/0: 1] sky2: driver version 1.30
[ 1.713632] [4: swapper/0: 1] PPP generic driver version 2.4.2
[ 1.713770] [4: swapper/0: 1] PPP BSD Compression module registered
[ 1.713878] [4: swapper/0: 1] PPP Deflate Compression module registered
[ 1.714003] [4: swapper/0: 1] PPP MPPE Compression module registered
[ 1.714110] [4: swapper/0: 1] NET: Registered protocol family 24
[ 1.714241] [4: swapper/0: 1] usbcore: registered new interface driver rtl8150
[ 1.714367] [4: swapper/0: 1] usbcore: registered new interface driver r8152
[ 1.714491] [4: swapper/0: 1] usbcore: registered new interface driver asix
[ 1.714615] [4: swapper/0: 1] usbcore: registered new interface driver ax88179_178a
[ 1.714748] [4: swapper/0: 1] usbcore: registered new interface driver cdc_ether
[ 1.714876] [4: swapper/0: 1] usbcore: registered new interface driver cdc_eem
[ 1.715007] [4: swapper/0: 1] usbcore: registered new interface driver smsc75xx
[ 1.715186] [4: swapper/0: 1] usbcore: registered new interface driver smsc95xx
[ 1.715340] [4: swapper/0: 1] usbcore: registered new interface driver net1080
[ 1.715485] [4: swapper/0: 1] usbcore: registered new interface driver cdc_subset
[ 1.715625] [4: swapper/0: 1] usbcore: registered new interface driver zaurus
[ 1.715769] [4: swapper/0: 1] usbcore: registered new interface driver cdc_ncm
[ 1.715895] [4: swapper/0: 1] usbcore: registered new interface driver cdc_mbim
[ 1.716743] [4: kworker/4:1: 64] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[ 1.719989] [4: swapper/0: 1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 1.721243] [4: swapper/0: 1] branch_clk_set_rate: Cannot scale gcc_rx1_usb2_clkref_clk clock while HW gating is enabled. Use corresponding hw_ctl_clk to scale it
[ 1.722368] [4: swapper/0: 1] msm-dwc3 a800000.ssusb: USB core frequency = 120000000
[ 1.722549] [4: swapper/0: 1] msm-dwc3 a800000.ssusb: setting lpm_to_suspend_delay to zero.
[ 1.723166] [4: swapper/0: 1] msm-dwc3 a800000.ssusb: missing TCSR memory resource
[ 1.723366] [4: swapper/0: 1] msm-dwc3 a800000.ssusb: unable to get dbm device
[ 1.724280] [4: swapper/0: 1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.724413] [4: swapper/0: 1] ehci-pci: EHCI PCI platform driver
[ 1.724526] [4: swapper/0: 1] ehci-platform: EHCI generic platform driver
[ 1.724857] [4: swapper/0: 1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.724990] [4: swapper/0: 1] ohci-pci: OHCI PCI platform driver
[ 1.725160] [4: swapper/0: 1] ohci-platform: OHCI generic platform driver
[ 1.725733] [4: swapper/0: 1] usbcore: registered new interface driver cdc_acm
[ 1.725849] [4: swapper/0: 1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.726006] [4: swapper/0: 1] usbcore: registered new interface driver usblp
[ 1.726136] [4: swapper/0: 1] usbcore: registered new interface driver cdc_wdm
[ 1.726262] [4: swapper/0: 1] usbcore: registered new interface driver usb-storage
[ 1.726411] [4: swapper/0: 1] usbcore: registered new interface driver usbserial
[ 1.726540] [4: swapper/0: 1] usbcore: registered new interface driver ftdi_sio
[ 1.726666] [4: swapper/0: 1] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.726820] [4: swapper/0: 1] usbcore: registered new interface driver pl2303
[ 1.726947] [4: swapper/0: 1] usbserial: USB Serial support registered for pl2303
[ 1.728021] [4: swapper/0: 1] usb_notify: external_notifier_init
[ 1.728123] [4: swapper/0: 1] usb_notify: create_external_notify
[ 1.728307] [4: swapper/0: 1] mousedev: PS/2 mouse device common for all mice
[ 1.728545] [4: swapper/0: 1] usbcore: registered new interface driver xpad
[ 1.728669] [4: swapper/0: 1] usbcore: registered new interface driver usb_acecad
[ 1.728798] [4: swapper/0: 1] usbcore: registered new interface driver aiptek
[ 1.728930] [4: swapper/0: 1] usbcore: registered new interface driver gtco
[ 1.729053] [4: swapper/0: 1] usbcore: registered new interface driver hanwang
[ 1.729179] [4: swapper/0: 1] usbcore: registered new interface driver kbtab
[ 1.729343] [4: swapper/0: 1] [sec_input] sec_ts_init
[ 1.729829] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_probe
[ 1.730634] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_parse_dt: TSP_ICID : 1
[ 1.731885] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_parse_dt: TSP_ID : 1
[ 1.732032] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_parse_dt: lcdtype 0x00D14015
[ 1.732173] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_parse_dt: i2c buffer limit: 256, lcd_id:D14015, bringup:0, FW:tsp_sec/y761_dream1.fw(2), id:1007,302, pat_function:2 mis_cal:1 dex:1, gesture:0
[ 1.733095] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_probe: init resource
[ 1.733220] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_pinctrl_configure: ACTIVE
[ 1.734698] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_power: on: avdd:on, dvdd:on
[ 1.734934] [4: swapper/0: 1] i2c-msm-v2 c1b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x13 (ok)
[ 1.735568] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_wait_for_ready: 09, 00, 10, 00, 00, 00, 00, 01 [0]
[ 1.735726] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_probe: power enable
[ 1.736139] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_probe: TOUCH DEVICE ID : 53, 45, 37, 61, 00
[ 1.746652] [2: kworker/u16:0: 6] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 1.750540] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_probe: TOUCH STATUS : 20 || 00, 02, 01, 04
[ 1.750958] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_read_calibration_report: count:10, pass count:10, fail count:0, status:0xA2
[ 1.751148] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_firmware_update_on_probe: initial firmware update tsp_sec/y761_dream1.fw, cal:A2
[ 1.751346] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_firmware_update_on_probe: request firmware done! size = 160980
[ 1.751522] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_save_version_of_bin: img_ver of bin = 10.17.1.27
[ 1.751677] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_save_version_of_bin: core_ver of bin = 10.17.2.0
[ 1.751832] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_save_version_of_bin: config_ver of bin = 10.17.1.28
[ 1.752448] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_save_version_of_ic: IC Image version info : 10.17.1.28
[ 1.752884] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_save_version_of_ic: IC Core version info : 10.17.2.0,
[ 1.753307] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_save_version_of_ic: IC config version info : 10.17.1.28
[ 1.753471] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_firmware_update_on_probe: skip - fw update & nv read
[ 1.753884] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_read_information: AC, 37, 61
[ 1.754460] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_read_information: nTX:10, nRX:21, rY:4096, rX:4096
[ 1.754816] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_read_information: STATUS : 20
[ 1.755215] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_read_information: TOUCH STATUS : 00, 02, 01, 04
[ 1.755580] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_read_information: Functions : 61
[ 1.756076] [4: swapper/0: 1] input: sec_touchscreen as /devices/soc/c1b6000.i2c/i2c-8/8-0048/input/input2
[ 1.756232] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_input_open
[ 1.756345] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_start_device
[ 1.756461] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_pinctrl_configure: ACTIVE
[ 1.756592] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_start_device: already power on
[ 1.756729] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_set_grip_type: re-init grip(0), edh:0, edg:0, lan:0
[ 1.757019] [4: swapper/0: 1] input: sec_touchpad as /devices/soc/c1b6000.i2c/i2c-8/8-0048/input/input3
[ 1.757215] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_probe: request_irq = 303
[ 1.757536] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] secure_touch_init
[ 1.757941] [0: irq/303-sec_ts: 281] sec_ts 8-0048: [sec_input] sec_ts_read_event: STATUS 1d 61 2 2 3 0 0 0
[ 1.758383] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_check_custom_library: (2) G950, || 00, 04, 00, 17, || 10, 00
[ 1.758568] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_check_custom_library: use SPONGE
[ 1.758706] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_set_custom_library: Sponge (0x40)
[ 1.759132] [4: swapper/0: 1] sec_ts 8-0048: [sec_input] sec_ts_probe: done
[ 1.759653] [4: swapper/0: 1] input: hbtp_vm as /devices/virtual/input/input4
[ 1.760252] [4: swapper/0: 1] qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: rtc core: registered qpnp_rtc as rtc0
[ 1.760633] [4: swapper/0: 1] i2c /dev entries driver
[ 1.761285] [4: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 12
[ 1.761614] [4: swapper/0: 1] CAM-SMMU cam_smmu_populate_sids:2246 __debug cnt = 8, cb->name: :vfe sid [0] = 3072
[ 1.761614] [4: swapper/0: 1] ,
[ 1.761831] [4: swapper/0: 1] CAM-SMMU cam_smmu_populate_sids:2246 __debug cnt = 8, cb->name: :vfe sid [1] = 3073
[ 1.761831] [4: swapper/0: 1] ,CAM-SMMU cam_smmu_populate_sids:2246 __debug cnt = 8, cb->name: :vfe sid [2] = 3074
[ 1.762047] [4: swapper/0: 1] ,
[ 1.762208] [4: swapper/0: 1] CAM-SMMU cam_smmu_populate_sids:2246 __debug cnt = 8, cb->name: :vfe sid [3] = 3075
[ 1.762208] [4: swapper/0: 1] ,<6>[ 1.762512] [4: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb2 to group 13
[ 1.762711] [4: swapper/0: 1] CAM-SMMU cam_smmu_populate_sids:2246 __debug cnt = 2, cb->name: :cpp sid [0] = 2560
[ 1.762711] [4: swapper/0: 1] ,
[ 1.762991] [4: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 14
[ 1.763194] [4: swapper/0: 1] CAM-SMMU cam_smmu_populate_sids:2246 __debug cnt = 2, cb->name: :camera_fd sid [0] = 2561
[ 1.763194] [4: swapper/0: 1] ,
[ 1.763477] [4: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 15
[ 1.763680] [4: swapper/0: 1] CAM-SMMU cam_smmu_populate_sids:2246 __debug cnt = 2, cb->name: :jpeg_enc0 sid [0] = 2048
[ 1.763680] [4: swapper/0: 1] ,
[ 1.763965] [4: swapper/0: 1] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 16
[ 1.764159] [4: swapper/0: 1] CAM-SMMU cam_smmu_populate_sids:2246 __debug cnt = 2, cb->name: :jpeg_dma sid [0] = 2049
[ 1.764159] [4: swapper/0: 1] ,
[ 1.767117] [4: swapper/0: 1] CAM-SOC msm_camera_get_reg_base:936 err: mem resource csiphy_clk_mux not found
[ 1.767273] [4: swapper/0: 1] csiphy_probe: no mem resource?
[ 1.767695] [4: swapper/0: 1] CAM-SOC msm_camera_get_reg_base:936 err: mem resource csiphy_clk_mux not found
[ 1.767849] [4: swapper/0: 1] csiphy_probe: no mem resource?
[ 1.768238] [4: swapper/0: 1] CAM-SOC msm_camera_get_reg_base:936 err: mem resource csiphy_clk_mux not found
[ 1.768391] [4: swapper/0: 1] csiphy_probe: no mem resource?
[ 1.770219] [4: swapper/0: 1] msm_actuator_i2c_probe:1976 msm_actuator_i2c_probe: succeeded
[ 1.770406] [4: swapper/0: 1] msm_actuator_i2c_probe:1976 msm_actuator_i2c_probe: succeeded
[ 1.770579] [4: swapper/0: 1] msm_actuator_i2c_probe:1976 msm_actuator_i2c_probe: succeeded
[ 1.770919] [4: swapper/0: 1] msm_eeprom_spi_probe: irq[0] cs[1] CPHA[0] CPOL[0] CS_HIGH[0]
[ 1.771049] [4: swapper/0: 1] msm_eeprom_spi_probe: max_speed[24000000]
[ 1.771256] [4: swapper/0: 1] msm_eeprom_parse_memory_map::556 set num_data as total-size (num_map : 16, total : 16384, valid : 11912)
[ 1.771445] [4: swapper/0: 1] msm_camera_power_up:2057 [POWER_DBG] : E requested by 2 sub deivce
[ 1.773257] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo12
[ 1.776227] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo17
[ 1.779117] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo14
[ 1.781998] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo15
[ 1.784909] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo7
[ 1.786261] [4: swapper/0: 1] msm_camera_power_up [POWER_DBG] : X
[ 1.786516] [4: swapper/0: 1] msm_eeprom_match_id: read 0xC815
[ 1.792154] [4: swapper/0: 1] msm_eeprom_match_crc: map version = 4 [0x34]
[ 1.792309] [4: swapper/0: 1] msm_eeprom_spi_setup : All CRC values are matched.
[ 1.792429] [4: swapper/0: 1] rear_af_cal_pan: 161, rear_af_cal_macro: 375, rear_af_cal_mid: -1
[ 1.792580] [4: swapper/0: 1] msm_camera_power_down:2485 [POWER_DBG] : E
[ 1.792692] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo7
[ 1.794261] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo15
[ 1.795837] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo14
[ 1.797365] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo17
[ 1.798911] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo12
[ 1.800461] [4: swapper/0: 1] msm_camera_request_gpio_table:762 invalid gpio_tbl 0000000000000000 / size 0
[ 1.800610] [4: swapper/0: 1] msm_camera_power_down [POWER_DBG] : X
[ 1.800740] [4: swapper/0: 1] msm_eeprom_spi_setup success result=0 supported=1ff X
[ 1.800981] [4: swapper/0: 1] msm_eeprom_parse_memory_map::556 set num_data as total-size (num_map : 14, total : 15360, valid : 8260)
[ 1.801162] [4: swapper/0: 1] msm_camera_power_up:2057 [POWER_DBG] : E requested by 2 sub deivce
[ 1.802890] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo5
[ 1.805819] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo17
[ 1.808720] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo6
[ 1.811603] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo16
[ 1.814509] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo13
[ 1.817434] [4: swapper/0: 1] s2m_enable: s2mpb02-ldo7
[ 1.818745] [4: swapper/0: 1] msm_camera_power_up [POWER_DBG] : X
[ 1.818935] [4: swapper/0: 1] i2c-msm-v2 c1b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x15 (ok)
[ 1.819437] [4: swapper/0: 1] msm_eeprom_match_id: read 0x00 0x00 0x00 0x00
[ 1.819550] [4: swapper/0: 1] msm_eeprom_i2c_probe: Skip front read eeprom in probe func
[ 1.819679] [4: swapper/0: 1] msm_camera_power_down:2485 [POWER_DBG] : E
[ 1.819800] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo7
[ 1.821342] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo13
[ 1.821884] [2: kworker/u16:0: 6] ufs_get_device_info: UNIQUE NUMBER = 9888203159534b4248 , LT: 0x11
[ 1.822070] [2: kworker/u16:0: 6] ufshcd-qcom 1da4000.ufshc: ufshcd_enable_ee: ee_ctrl_mask=0x0, mask=0x4. val=0x4.
[ 1.822887] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo16
[ 1.824098] [2: kworker/u16:0: 6] ufshcd-qcom 1da4000.ufshc: ufshcd_enable_ee: EES = 0x4.
[ 1.824430] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo6
[ 1.826169] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo17
[ 1.827731] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-ldo5
[ 1.829408] [4: swapper/0: 1] msm_camera_request_gpio_table:762 invalid gpio_tbl 0000000000000000 / size 0
[ 1.829535] [4: swapper/0: 1] msm_camera_power_down [POWER_DBG] : X
[ 1.829640] [4: swapper/0: 1] msm_eeprom_i2c_probe qcom,sensor-position 1
[ 1.829753] [4: swapper/0: 1] msm_eeprom_i2c_probe success result=0 is_supported = 0x0001
[ 1.829877] [2: kworker/u16:0: 6] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[ 1.830048] [4: swapper/0: 1] msm_eeprom_init_module:2419 probe succeed
[ 1.830935] [2: kworker/u16:0: 6] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGBF7G9L4LBATRA 0700 PQ: 0 ANSI: 6
[ 1.831420] [4: swapper/0: 1] MSM-SENSOR-INIT svc_cheating_prevent_device_file_create:1085 Success to find SVC_sd : 0xffffffc0f7b853c0 SVC : 0xffffffc0f7b83080
[ 1.831420] [4: swapper/0: 1]
[ 1.831661] [4: swapper/0: 1] MSM-SENSOR-INIT svc_cheating_prevent_device_file_create:1092 Success to create sys/devices/svc/Camera : 0xffffffc072567380
[ 1.831661] [4: swapper/0: 1]
[ 1.832038] [4: swapper/0: 1] MSM-SENSOR-INIT msm_sensor_init_module:1469 MSM_SENSOR_INIT_MODULE : X
[ 1.832469] [2: kworker/u16:0: 6] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGBF7G9L4LBATRA 0700 PQ: 0 ANSI: 6
[ 1.832903] [4: swapper/0: 1] msm_sensor_get_sub_module_index qcom,companion cell index 0, rc 0
[ 1.833050] [4: swapper/0: 1] msm_sensor_get_sub_module_index qcom,companion cell index 1, rc 0
[ 1.833420] [4: swapper/0: 1] msm_sensor_init_default_params:2095 clk_count: 4
[ 1.833983] [2: kworker/u16:0: 6] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGBF7G9L4LBATRA 0700 PQ: 0 ANSI: 6
[ 1.834099] [4: swapper/0: 1] msm_sensor_get_sub_module_index qcom,companion cell index 0, rc 0
[ 1.834210] [4: swapper/0: 1] msm_sensor_get_sub_module_index qcom,companion cell index 1, rc 0
[ 1.834561] [4: swapper/0: 1] msm_sensor_init_default_params:2095 clk_count: 4
[ 1.835086] [4: swapper/0: 1] msm_sensor_init_default_params:2095 clk_count: 2
[ 1.835540] [4: swapper/0: 1] sec_iris::msm_camera_tz_i2c_register_sensor:606 - id=4, client=ffffffc072614000
[ 1.835677] [4: swapper/0: 1] msm_sensor_init_default_params:2095 clk_count: 2
[ 1.835781] [2: kworker/u16:0: 6] scsi 0:0:0:0: Direct-Access TOSHIBA THGBF7G9L4LBATRA 0700 PQ: 0 ANSI: 6
[ 1.835962] [4: swapper/0: 1] [msm_ois_init_module::2463] Enter
[ 1.836045] [4: swapper/0: 1] Error: Driver 'qcom,ois' is already registered, aborting...
[ 1.836171] [4: swapper/0: 1] [msm_ois_init_module::2469] msm_ois_init_module:2469 platform driver probe rc -16
[ 1.836308] [4: swapper/0: 1] [msm_ois_i2c_probe::1617] Enter
[ 1.837300] [2: kworker/u16:0: 6] scsi 0:0:0:1: Direct-Access TOSHIBA THGBF7G9L4LBATRA 0700 PQ: 0 ANSI: 6
[ 1.838785] [2: kworker/u16:0: 6] scsi 0:0:0:2: Direct-Access TOSHIBA THGBF7G9L4LBATRA 0700 PQ: 0 ANSI: 6
[ 1.839961] [4: swapper/0: 1] MSM-CPP cpp_init_hardware:1037 CPP HW Version: 0x60010000
[ 1.840068] [4: swapper/0: 1] MSM-CPP cpp_init_hardware:1055 stream_cnt:0
[ 1.840169] [2: kworker/u16:0: 6] scsi 0:0:0:3: Direct-Access TOSHIBA THGBF7G9L4LBATRA 0700 PQ: 0 ANSI: 6
[ 1.840339] [0: kworker/u16:3: 274] MSM-CPP cpp_release_hardware:1100 cpp_release_hardware
[ 1.841483] [0: kworker/u16:3: 274] sd 0:0:0:0: [sda] sd_revalidate_disk
[ 1.842494] [2: kworker/u16:0: 6] sd 0:0:0:1: [sdb] sd_revalidate_disk
[ 1.843825] [4: swapper/0: 1] __msm_jpeg_init:1537] Jpeg Device id 0
[ 1.843952] [4: swapper/0: 1] CAM-SMMU cam_smmu_create_add_handle_in_table:598 jpeg_enc0 creates handle 0x3aaed
[ 1.844642] [0: kworker/u16:2: 63] sd 0:0:0:2: [sdc] sd_revalidate_disk
[ 1.845384] [0: kworker/u16:4: 292] sd 0:0:0:3: [sdd] sd_revalidate_disk
[ 1.945049] [4: swapper/0: 1] msm_fd caa4000.qcom,fd: Face detection halt timeout
[ 1.948255] [4: swapper/0: 1] iommu: Adding device cc00000.qcom,vidc:non_secure_cb to group 17
[ 1.950121] [4: swapper/0: 1] iommu: Adding device cc00000.qcom,vidc:firmware_cb to group 18
[ 1.950361] [4: swapper/0: 1] iommu: Adding device cc00000.qcom,vidc:secure_bitstream_cb to group 19
[ 1.951721] [4: swapper/0: 1] iommu: Adding device cc00000.qcom,vidc:secure_pixel_cb to group 20
[ 1.952595] [4: swapper/0: 1] iommu: Adding device cc00000.qcom,vidc:secure_non_pixel_cb to group 21
[ 1.954578] [4: swapper/0: 1] c880000.qcom,vmem supply vdd not found, using dummy regulator
[ 1.955586] [4: swapper/0: 1] msm_vidc_vmem: Up and running with 4 banks of memory from [io size 0x3ff5ee31c9 pref window disabled]
[ 1.956831] [4: swapper/0: 1] iommu: Adding device c900000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 22
[ 1.957132] [4: swapper/0: 1] iommu: Adding device c900000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 23
[ 1.957593] [4: swapper/0: 1] No change in context(0==0), skip
[ 1.959395] [4: swapper/0: 1] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:2
[ 1.959558] [4: swapper/0: 1] sde_rotator c900000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
[ 1.960258] [4: swapper/0: 1] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
[ 1.960618] [4: swapper/0: 1] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
[ 1.960835] [4: swapper/0: 1] 6I2C radio driver for rtc6213n FM Tuner, Version 1.0.1
[ 1.960957] [4: swapper/0: 1] 6I2C radio driver for rtc6213n FM Tuner, Version 1.0.1
[ 1.965152] [4: swapper/0: 1] rtc6213n 20-0064: rtc6213n_i2c_probe DeviceID=0x1688 ChipID=0xffff
[ 1.965330] [4: swapper/0: 1] rtc6213n 20-0064: rtc6213n_i2c_probe DeviceID=0x1688 ChipID=0xffff
[ 1.966663] [4: swapper/0: 1] unable to find DT imem DLOAD mode node
[ 1.967400] [4: swapper/0: 1] unable to find DT imem EDLOAD mode node
[ 1.967828] [4: swapper/0: 1] set_dload_mode <1> ( 8a2a774 )
[ 1.968838] [4: swapper/0: 1] sec_therm_probe: ret(-517)
[ 1.968934] [4: swapper/0: 1] sec_therm_probe: qpnp_get_vadc is fail : ret(-517)
[ 1.969096] [4: swapper/0: 1] sec_therm_probe: ret(-517)
[ 1.969192] [4: swapper/0: 1] sec_therm_probe: qpnp_get_vadc is fail : ret(-517)
[ 1.989896] [4: swapper/0: 1] msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
[ 1.990598] [4: swapper/0: 1] msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
[ 1.991044] [4: swapper/0: 1] device-mapper: uevent: version 1.0.3
[ 1.991251] [4: swapper/0: 1] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.991535] [4: swapper/0: 1] device-mapper: req-crypt: dm-req-crypt successfully initalized.
[ 1.991535] [4: swapper/0: 1]
[ 1.991726] [4: swapper/0: 1] [BT] bcm4361_bluetooth_init
[ 1.991947] [4: swapper/0: 1] [BT] bcm4361_bluetooth_probe
[ 1.992038] [4: swapper/0: 1] [BT] bcm4361 dt_info
[ 1.992130] [4: swapper/0: 1] [BT] bt_en pin is 1009
[ 1.992366] [4: swapper/0: 1] Bluetooth: ffffffc0f964fd10
[ 1.992986] [4: swapper/0: 1] bluesleep probe
[ 1.992986] [4: swapper/0: 1] [BT]
[ 1.993159] [4: swapper/0: 1] [BT] hostwake gpio is 101 [BT]
[ 1.993278] [4: swapper/0: 1] [BT] btwake gpio is 114 [BT]
[ 1.993379] [4: swapper/0: 1] [BT] hostwake irq is 283 [BT]
[ 1.993509] [4: swapper/0: 1] [BT] Bluesleep probe success
[ 1.993835] [4: swapper/0: 1] sdhci: Secure Digital Host Controller Interface driver
[ 1.993967] [4: swapper/0: 1] sdhci: Copyright(c) Pierre Ossman
[ 1.994072] [4: swapper/0: 1] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.995477] [4: swapper/0: 1] sdhci_msm c0a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
[ 1.995716] [4: swapper/0: 1] pcal6524_gpio_direction_output(off=[0], val=[1])
[ 1.997184] [4: swapper/0: 1] sdhci_msm c0a4900.sdhci: tflash is enabled(300).
[ 1.997623] [4: swapper/0: 1] sdhci_msm c0a4900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 reading irq cpu
[ 1.997785] [4: swapper/0: 1] sdhci_msm c0a4900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for IRQ will be disabled
[ 1.997957] [4: swapper/0: 1] sdhci_msm c0a4900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled
[ 2.010375] [4: swapper/0: 1] sdhci_msm_probe : Change sysfs Card Detect
[ 2.010911] [4: swapper/0: 1] sdhci_msm c0a4900.sdhci: No vmmc regulator found
[ 2.011027] [4: swapper/0: 1] sdhci_msm c0a4900.sdhci: No vqmmc regulator found
[ 2.011474] [4: swapper/0: 1] mmc0: SDHCI controller on c0a4900.sdhci [c0a4900.sdhci] using 64-bit ADMA in legacy mode
[ 2.014292] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_init
[ 2.014628] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_probe
[ 2.014756] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt
[ 2.015158] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, led_b
[ 2.015281] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, led_r
[ 2.015402] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, led_g
[ 2.015529] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, led_w
[ 2.015660] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, device_type = 4
[ 2.015814] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, normal_powermode_current = a
[ 2.015989] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, low_powermode_current = a
[ 2.016131] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, brightness_ratio_r = 2ee
[ 2.016275] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, brightness_ratio_g = 46
[ 2.016439] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, brightness_ratio_b = 82
[ 2.016577] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, brightness_ratio_r_low = 46
[ 2.016737] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, brightness_ratio_g_low = 1
[ 2.016886] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_parse_dt, brightness_ratio_b_low = 13
[ 2.017023] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_probe : octa_color=1 device_type=4
[ 2.017189] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_get
[ 2.018067] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_get
[ 2.018940] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_get
[ 2.019803] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_get
[ 2.020683] [4: swapper/0: 1] leds-sm5720-rgb: sm5720_rgb_probe done
[ 2.021483] [4: swapper/0: 1] [LED] s2mpb02_led_probe 2 leds
[ 2.021576] [4: swapper/0: 1] s2mpb02_led_probe led0 setup ...
[ 2.028468] [4: swapper/0: 1] s2mpb02_led_probe led1 setup ...
[ 2.035421] [4: swapper/0: 1] <s2mpb02_led_probe> end
[ 2.035988] [4: swapper/0: 1] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.037064] [4: swapper/0: 1] Successfully registered hid_synaptics_driver
[ 2.037224] [4: swapper/0: 1] usbcore: registered new interface driver usbhid
[ 2.037345] [4: swapper/0: 1] usbhid: USB HID core driver
[ 2.037499] [4: swapper/0: 1] ashmem: initialized
[ 2.038133] [4: swapper/0: 1] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
[ 2.042764] [4: swapper/0: 1] bimc-bwmon 1008000.qcom,cpu-bwmon: BW HWmon governor registered.
[ 2.043216] [4: swapper/0: 1] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
[ 2.043392] [4: swapper/0: 1] arm-memlat-mon soc:qcom,arm-memlat-mon-4: Memory Latency governor registered.
[ 2.045172] [4: swapper/0: 1] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[ 2.045350] [4: swapper/0: 1] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
[ 2.045553] [4: swapper/0: 1] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
[ 2.045728] [4: swapper/0: 1] devfreq soc:qcom,memlat-cpu4: Couldn't update frequency transition information.
[ 2.046808] [4: swapper/0: 1] muic_notifier_init
[ 2.046879] [4: swapper/0: 1] create_coagent_thread:
[ 2.048952] [4: swapper/0: 1] muic-universal:muic_init
[ 2.049010] [0: coagent1: 349] coagent_thread: 1th thread is running...
[ 2.049082] [0: coagent1: 349] init_fifo_test: fifo module insert
[ 2.049148] [0: coagent1: 349] init_fifo_test: queue size:1024
[ 2.049353] [4: swapper/0: 1] muic-universal:muic_probe
[ 2.049430] [4: swapper/0: 1] of_muic_dt: chip_name is sm,sm5720
[ 2.049495] [4: swapper/0: 1] of_muic_dt: muic,undefined_range[T]
[ 2.049562] [0: coagent1: 349] init_fifo_test: queue_available1: 1024
[ 2.049629] [4: swapper/0: 1] of_muic_dt: irq-gpio: 1016
[ 2.049688] [4: swapper/0: 1] of_muic_dt: No gpio_uart_sel defined.
[ 2.049754] [4: swapper/0: 1] of_update_supported_list
[ 2.049929] [0: coagent1: 349] init_fifo_test: queue len: 2
[ 2.049992] [0: coagent1: 349] init_fifo_test: queue_available: 1022
[ 2.050065] [0: coagent1: 349] coagent_thread: [ 0 - 1/1023] cmd=5, param=4
[ 2.050136] [4: swapper/0: 1] muic-universal:of_update_supported_list No support list-variant dt node'[-22]
[ 2.050234] [4: swapper/0: 1] muic_probe: muic irq_gpio = 353
[ 2.050296] [4: swapper/0: 1] muic_probe: muic i2c client dummy at 0x25
[ 2.050387] [4: swapper/0: 1] muic_probe: mfd i2c client sm5720 at 0x49
[ 2.050468] [4: swapper/0: 1] muic_probe: fuel i2c client dummy at 0x71
[ 2.050539] [4: swapper/0: 1] muic_probe: chg i2c client sm5720 at 0x49
[ 2.050610] [4: swapper/0: 1] muic_probe: VPS_TYPE=0
[ 2.050667] [4: swapper/0: 1] muic_probe: gpio_uart_sel is not supported.
[ 2.050738] [4: swapper/0: 1] muic_init_gpio_cb (11)
[ 2.050794] [4: swapper/0: 1] muic_init_gpio_cb: usb_path(PDA), uart_path(AP)
[ 2.050901] [4: swapper/0: 1] muic_notifier_register: listener=0 register
[ 2.050975] [0: coagent1: 349] coagent_thread: [ 1 - 0/1024] cmd=6, param=5
[ 2.051048] [0: coagent1: 349] coagent_thread: The copied item is not one(0)
[ 2.051128] [4: swapper/0: 1] muic_handle_dock_notification: ignore(68)
[ 2.051198] [4: swapper/0: 1] muic_init_switch_dev_cb: done
[ 2.051269] [4: swapper/0: 1] switch_sel : 0x000b
[ 2.051341] [4: swapper/0: 1] Disable rustproof mode
[ 2.051430] [4: swapper/0: 1] AFC mode enabled
[ 2.051483] [4: swapper/0: 1] chip_name : sm,sm5720
[ 2.051537] [4: swapper/0: 1] [0] : sm,sm5720
[ 2.051589] [4: swapper/0: 1] muic_register_regmap: sm5720-MUIC registered.
[ 2.052416] [4: swapper/0: 1] muic_rev_info [DeviceID] vendor=0x1, ver=0x0
[ 2.052489] [4: swapper/0: 1] muic_init_chip
[ 2.052540] [4: swapper/0: 1] [02] : 0x1e
[ 2.053119] [4: swapper/0: 1] [06] : 0x1c
[ 2.053699] [4: swapper/0: 1] [07] : 0x18
[ 2.054296] [4: swapper/0: 1] [08] : 0x00
[ 2.054957] [4: swapper/0: 1] [0d] : 0x03
[ 2.055577] [4: swapper/0: 1] [16] : 0x26
[ 2.056161] [4: swapper/0: 1] [19] : 0x79
[ 2.056705] [4: swapper/0: 1] [37] : 0x80
[ 2.057253] [4: swapper/0: 1] muic-universal:sm5720_get_sizeof_regmap
[ 2.057323] [4: swapper/0: 1] sm5720_afc_init_state:attached_dev = 68
[ 2.057488] [4: swapper/0: 1] muic-universal:of_muic_sm_dt pmuic->qc_support:0x09
[ 2.057566] [4: swapper/0: 1] coagent_update_ctx
[ 2.057619] [4: swapper/0: 1] sm,sm5720:muic_init_detect
[ 2.058343] [4: swapper/0: 1] -muic_regmap_trace w 1e=[1e:00+00000102]CONTROL
[ 2.058419] [4: swapper/0: 1] sm,sm5720:sm5720_muic_irq_handler irq(-1)
[ 2.062454] [4: swapper/0: 1] muic-universal:muic_detect_dev dev[1:0x4, 2:0x0, 3:0x0], adc:0x1f, vbvolt:0x1
[ 2.062551] [4: swapper/0: 1] muic-universal : USB DETECTED
[ 2.062613] [4: swapper/0: 1] resolve_dedicated_dev:Supported.
[ 2.063339] [4: swapper/0: 1] sm5720_get_dcdtmr_irq: REG_DEVT3: 0x00
[ 2.063407] [4: swapper/0: 1] muic-universal:muic_detect_dev: get dcd timer state: false
[ 2.063490] [4: swapper/0: 1] muic-universal:muic_set_legacy_dev: 0->1
[ 2.063559] [4: swapper/0: 1] muic-universal:muic_handle_attach attached_dev:68 new_dev:1 adc:0x1f, vbvolt:01
[ 2.063658] [4: swapper/0: 1] muic-universal:attach_usb
[ 2.063716] [4: swapper/0: 1] set_switch_mode:
[ 2.063768] [4: swapper/0: 1] sm5720_set_switching_mode
[ 2.064491] [4: swapper/0: 1] -muic_regmap_trace w 1e=[1e:01+00020102]CONTROL
[ 2.064566] [4: swapper/0: 1] muic_notifier_attach_attached_dev: (1)
[ 2.064635] [4: swapper/0: 1] muic_notifier_notify: CMD=1, DATA=1
[ 2.064701] [4: swapper/0: 1] (msm_serial_hs, id 8) msm_serial_handle_notification, act(1), dev(1)
[ 2.064792] [4: swapper/0: 1] muic_handle_dock_notification: ignore(1)
[ 2.064861] [4: swapper/0: 1] muic_notifier_notify: notify done(0x0)
[ 2.064930] [4: swapper/0: 1] hv_update_status:muic-hv: hv is not ready.
[ 2.065001] [4: swapper/0: 1] muic-universal:update_jig_state update_jig_state : 0
[ 2.065200] [4: swapper/0: 1] muic_jig_uart_cb: MUIC uart type(0)
[ 2.065303] [4: swapper/0: 1] muic_is_ccic_supported_jig: mdev:1 Unsupported.
[ 2.065378] [4: swapper/0: 1] muic_register_ccic_notifier: Registering CCIC_NOTIFY_DEV_MUIC.
[ 2.065463] [4: swapper/0: 1] init_mdev_desc
[ 2.065513] [4: swapper/0: 1] usb: [M] manager_notifier_init
[ 2.065590] [4: swapper/0: 1] vbus_notifier_register: listener=2 register
[ 2.065664] [4: swapper/0: 1] usb: [M] manager_handle_vbus_notification: cmd=0, vbus_type=LOW, WATER DET=0 ATTACH=DETATCH (0)
[ 2.065775] [4: swapper/0: 1] ccic_notifier_register: listener=6 register
[ 2.065846] [4: swapper/0: 1] ccic_notifier_init
[ 2.065931] [4: swapper/0: 1] usb: [M] manager_handle_ccic_notification: src:INITIAL dest:INITIAL id:ID_INITIAL attach/rid:0
[ 2.066042] [4: swapper/0: 1] usb: [M] manager_notifier_notify: src:INITIAL dest:INITIAL id:ID_INITIAL sub1:00 sub2:00 sub3:00
[ 2.066161] [4: swapper/0: 1] usb_notify: register_usblog_proc size=20544
[ 2.066234] [4: swapper/0: 1] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.066310] [4: swapper/0: 1] muic_notifier_register: listener=7 register
[ 2.066383] [4: swapper/0: 1] usb: [M] manager_handle_muic_notification: attach:1, cable_type:1
[ 2.066472] [4: swapper/0: 1] usb: [M] manager_handle_muic_notification:attach:1, ccic_drp_state=0, ccic_rid_state:0
[ 2.066576] [4: swapper/0: 1] usb: [M] manager_handle_muic_notification: USB(1) Attached, CCIC: Detached
[ 2.066673] [4: swapper/0: 1] usb: [M] manager_notifier_notify: src:MUIC dest:BATTERY id:ID_ATTACH sub1:01 sub2:00 sub3:01
[ 2.066781] [4: swapper/0: 1] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.066858] [4: swapper/0: 1] manager_notifier_init : result of register = 0!
[ 2.066933] [4: swapper/0: 1] manager_notifier_init : done!
[ 2.066994] [4: swapper/0: 1] usb: [M] manager_notifier_init end
[ 2.067059] [4: swapper/0: 1] usb: [M] manager_notifier_register: listener=21 register
[ 2.067140] [4: swapper/0: 1] muic_register_ccic_notifier: done.
[ 2.067204] [4: swapper/0: 1] muic_register_usb_notifier: Registering EXTERNAL_NOTIFY_DEV_MUIC.
[ 2.067292] [4: swapper/0: 1] usb_notify: usb_external_notify_register: listener=(muic)0 register
[ 2.067381] [4: swapper/0: 1] muic_register_usb_notifier: done.
[ 2.067471] [4: swapper/0: 1] sm,sm5720:muic_irq_init
[ 2.067528] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int1_attach) = 354
[ 2.071710] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int1_detach) = 353
[ 2.075900] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int2_vbusdet_on) = 355
[ 2.080079] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int2_vbus_off) = 356
[ 2.084257] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int3_qc20_accepted) = 357
[ 2.088458] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int3_afc_error) = 358
[ 2.092639] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int3_afc_sta_chg) = 359
[ 2.096833] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int3_multi_byte) = 360
[ 2.101017] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int3_vbus_update) = 361
[ 2.105226] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int3_afc_accepted) = 362
[ 2.109416] [4: swapper/0: 1] muic_irq_init requesting irq no(irq_int3_afc_ta_attached) = 363
[ 2.114045] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000
[ 2.114165] [4: swapper/0: 1] coresight-csr 6001000.csr: CSR initialized
[ 2.114375] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000
[ 2.114519] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000
[ 2.114746] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000
[ 2.114882] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000
[ 2.115032] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000
[ 2.115221] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000
[ 2.115398] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000
[ 2.115552] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000
[ 2.115683] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000
[ 2.115815] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000
[ 2.115953] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000
[ 2.116078] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000
[ 2.116214] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000
[ 2.116348] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000
[ 2.116480] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000
[ 2.116617] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000
[ 2.116742] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7820000
[ 2.116883] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7920000
[ 2.117020] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7a20000
[ 2.117164] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7b20000
[ 2.117294] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7c20000
[ 2.117433] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7d20000
[ 2.117583] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7e20000
[ 2.117724] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7f20000
[ 2.117878] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7b80000
[ 2.118007] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7bc1000
[ 2.118141] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/cti@7b91000
[ 2.118485] [4: swapper/0: 1] sps:BAM 0x0000000006064000 is registered.
[ 2.118647] [4: swapper/0: 1] coresight-tmc 6048000.tmc: TMC initialized
[ 2.118958] [4: swapper/0: 1] coresight-tmc 6047000.tmc: TMC initialized
[ 2.119168] [4: swapper/0: 1] coresight-funnel 6045000.funnel: FUNNEL initialized
[ 2.119369] [4: swapper/0: 1] coresight-funnel 6041000.funnel: FUNNEL initialized
[ 2.119566] [4: swapper/0: 1] coresight-funnel 6042000.funnel: FUNNEL initialized
[ 2.119766] [4: swapper/0: 1] coresight-funnel 7b70000.funnel: FUNNEL initialized
[ 2.119966] [4: swapper/0: 1] coresight-funnel 7b60000.funnel: FUNNEL initialized
[ 2.120157] [4: swapper/0: 1] coresight-funnel 6005000.funnel: FUNNEL initialized
[ 2.120361] [4: swapper/0: 1] coresight-funnel 7083000.funnel: FUNNEL initialized
[ 2.120558] [4: swapper/0: 1] coresight-funnel 7225000.funnel: FUNNEL initialized
[ 2.120949] [4: swapper/0: 1] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized
[ 2.121159] [4: swapper/0: 1] coresight-stm: probe of 6002000.stm failed with error -1
[ 2.124071] [4: swapper/0: 1] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@158000
[ 2.124209] [4: swapper/0: 1] coresight-hwevent 158000.hwevent: Hardware Event driver initialized
[ 2.124539] [4: swapper/0: 1] coresight-dummy soc:dummy-tpdm-wcss: Dummy source initialized
[ 2.124855] [4: swapper/0: 1] battery_notifier_init
[ 2.124952] [4: swapper/0: 1] sm5720_fuelgauge_init:
[ 2.125108] [4: swapper/0: 1] sm5720_fuelgauge_probe: SM5720 Fuelgauge Driver Loading
[ 2.125399] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt_for_age num_age_step : 5
[ 2.125478] [4: swapper/0: 1] [0/4]cycle:0, float:43500, full_v:4250, recharge_v:4300, soc:93
[ 2.125565] [4: swapper/0: 1] [1/4]cycle:200, float:43300, full_v:4225, recharge_v:4280, soc:92
[ 2.125654] [4: swapper/0: 1] [2/4]cycle:250, float:43100, full_v:4212, recharge_v:4260, soc:91
[ 2.125743] [4: swapper/0: 1] [3/4]cycle:300, float:42900, full_v:4187, recharge_v:4240, soc:90
[ 2.125831] [4: swapper/0: 1] [4/4]cycle:1000, float:42400, full_v:4137, recharge_v:4190, soc:89
[ 2.125997] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt: capacity_max: 1000, capacity_min: 0
[ 2.126085] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt: calculation_type: 0x1c, fuel_alert_soc: 1,
[ 2.126085] [4: swapper/0: 1] repeated_fuelalert: 0
[ 2.126230] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt : LOW TEMP LIMIT(100)
[ 2.126309] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt : SW V Empty (3200)mV, SW V Empty recover (3480)mV, CISD V_Alarm (3100)mV
[ 2.126448] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt len: 4416, lenth: 1104, 92
[ 2.126528] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt : Full condition soc is Empty
[ 2.126610] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3076: battery id = 0
[ 2.126690] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][0] 0x1400>
[ 2.126793] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][1] 0x1b47>
[ 2.126895] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][2] 0x1c7c>
[ 2.126998] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][3] 0x1d71>
[ 2.127100] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][4] 0x1d88>
[ 2.127203] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][5] 0x1ddd>
[ 2.127306] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][6] 0x1e2a>
[ 2.127409] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][7] 0x1e68>
[ 2.127512] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][8] 0x1ed3>
[ 2.127616] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][9] 0x1f3d>
[ 2.127720] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][10] 0x1fb0>
[ 2.127824] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][11] 0x1fdd>
[ 2.127928] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][12] 0x2076>
[ 2.128031] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][13] 0x20c0>
[ 2.128135] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][14] 0x2266>
[ 2.128239] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table0 = <table[0][15] 0x2400>
[ 2.128343] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][0] 0x0>
[ 2.128443] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][1] 0x1e>
[ 2.128544] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][2] 0x7e>
[ 2.128646] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][3] 0x139>
[ 2.128748] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][4] 0x24e>
[ 2.128850] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][5] 0x419>
[ 2.128952] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][6] 0x67f>
[ 2.129055] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][7] 0x983>
[ 2.129157] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][8] 0xc81>
[ 2.129260] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][9] 0xdb4>
[ 2.129363] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][10] 0xf84>
[ 2.129467] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][11] 0x10b2>
[ 2.129571] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][12] 0x11e5>
[ 2.129674] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][13] 0x1319>
[ 2.129778] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][14] 0x178c>
[ 2.129881] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3090: battery0,battery_table1 = <table[1][15] 0x1792>
[ 2.129987] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3103: battery0,rce_value = <0x4e1 0x3e6 0x1d7>
[ 2.130086] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3110: battery0,dtcd_value = <0x1>
[ 2.130177] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3121: battery0,rs_value = <0xa4 0x147 0x146 0x3800 0x7a>
[ 2.130284] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3128: battery0,vit_period = <0xa0a>
[ 2.130375] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3139: battery0,mix_value = <0x103 0x4>
[ 2.130468] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3151: battery0,battery_type = <4400 0x0 0x178c>
[ 2.130568] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3167: battery0,v_max_table = <v_max_table[0] 0x2266>
[ 2.130671] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3167: battery0,v_max_table = <v_max_table[1] 0x223e>
[ 2.130774] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3167: battery0,v_max_table = <v_max_table[2] 0x2215>
[ 2.130878] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3167: battery0,v_max_table = <v_max_table[3] 0x21ed>
[ 2.130981] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3167: battery0,v_max_table = <v_max_table[4] 0x2195>
[ 2.131085] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3184: battery0,q_max_table = <q_max_table[0] 0x178c>
[ 2.131188] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3184: battery0,q_max_table = <q_max_table[1] 0x1728>
[ 2.131291] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3184: battery0,q_max_table = <q_max_table[2] 0x16c3>
[ 2.131394] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3184: battery0,q_max_table = <q_max_table[3] 0x165f>
[ 2.131496] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3184: battery0,q_max_table = <q_max_table[4] 0x1563>
[ 2.131599] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3190: battery0,q_max_table = <v_max_now = 0x2266>, <q_max_now = 0x178c>, <chg_full_soc = 93>
[ 2.131732] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3198: battery0,misc = <0x0>
[ 2.131817] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3205: battery0,v_alarm = <3100>
[ 2.131905] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3217: battery0,topoff_soc = <0 3 300>
[ 2.131997] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3229: battery0,cycle_cfg = <7 1 3>
[ 2.132088] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3242: battery0,v_offset_cancel = <0 0 100 10>
[ 2.132185] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3249: battery0,volt_cal = <0x8000>
[ 2.132276] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3263: battery0,curr_offset = <1 0x0 0x0 0x0>
[ 2.132374] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3277: battery0,curr_cal = <0x8f70 0x8080 0x8080 0x8080 0x8080 0x8080>
[ 2.132491] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3288: battery0,full_offset = <20 0>
[ 2.132581] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3296: battery0,temp_std = <25>
[ 2.132669] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3307: battery0,temp_volcal = <1, 15, 1>
[ 2.132764] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3324: battery0,temp_offset = <1, 11, 1, 1, 8, -1>
[ 2.132866] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3347: battery0,temp_cal = <0, 6, 1, 11, -1, 1, 6, 1, 9, 1>
[ 2.132975] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3370: battery0,ext_temp_cal = <0, 2, 1, 2, 1, 1, 2, 3, 2, 3>
[ 2.133086] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3385: battery0,tem_poff = <3400, 50, 3250, 50>
[ 2.133185] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3400: battery0,arsm = <1, 3, 1, 6>
[ 2.133275] [4: swapper/0: 1] sm5720_fuelgauge_parse_dt() line-3407: battery0,data_ver = <5>
[ 2.134198] [4: swapper/0: 1] sm5720_get_device_id: SM5720 device_id = 0xe
[ 2.134271] [4: swapper/0: 1] sm5720_fg_check_battery_present: sm5720_fg_get_batt_present
[ 2.134477] [4: swapper/0: 1] sm5720_fg_init: jig_result : 0
[ 2.135360] [4: swapper/0: 1] sm5720_fg_init: v_max_now = 0x3b3
[ 2.136224] [4: swapper/0: 1] sm5720_fg_init: v_max_now = 0x2266
[ 2.137087] [4: swapper/0: 1] sm5720_fg_init: q_max_now = 0x178c
[ 2.137950] [4: swapper/0: 1] sm5720_fg_init: q_max_now = 0x178c
[ 2.138817] [4: swapper/0: 1] sm5720_fg_init: q_max_now = 0x178c
[ 2.139688] [4: swapper/0: 1] sm5720_fg_check_reg_init_need: SM5720_REG_FG_OP_STATUS : 0x10 , return FALSE NO init need
[ 2.144370] [4: swapper/0: 1] sm5720_alg_setup: alg_off : <0x0 0x0 0x0> alg_slo : <0x8f70 0x8080 0x8080>
[ 2.149308] [4: swapper/0: 1] sm5720_fg_buffer_read: sm5720 FG buffer 0x30_0x35 lb_V = 0x172c, 0x1730, 0x1733, 0x1738, 0x173b, 0x173f
[ 2.154225] [4: swapper/0: 1] sm5720_fg_buffer_read: sm5720 FG buffer 0x36_0x3B cb_V = 0x1742, 0x1746, 0xa0d, 0xa0e, 0xa0f, 0xa0f
[ 2.159170] [4: swapper/0: 1] sm5720_fg_buffer_read: sm5720 FG buffer 0x40_0x45 lb_I = 0x3b4, 0x3b1, 0x3b3, 0x3b2, 0x3b4, 0x3b2
[ 2.164090] [4: swapper/0: 1] sm5720_fg_buffer_read: sm5720 FG buffer 0x46_0x4B cb_I = 0x3b3, 0x3b2, 0x403e, 0x4041, 0x403d, 0x4041
[ 2.165008] [4: swapper/0: 1] sm5720_meas_mq_start: SM5720_FG_REG_AUX_2 : <0x0>
[ 2.165896] [4: swapper/0: 1] sm5720_meas_mq_start: read start mq is <0x18df> and resumed
[ 2.166782] [4: swapper/0: 1] sm5720_meas_mq_resume: SM5720_FG_REG_AUX_2 : <0x0>
[ 2.169924] [4: swapper/0: 1] sm5720_fg_check_reg_init_need: SM5720_REG_FG_OP_STATUS : 0x10 , return FALSE NO init need
[ 2.170030] [4: swapper/0: 1] sm5720_fuelgauge_probe: SW/HW V empty init
[ 2.171557] [4: swapper/0: 1] sm5720_fg_set_vempty: HW V EMPTY Enable, SW V EMPTY Disable 3100 mV (793)
[ 2.173251] [4: swapper/0: 1] sm5720_get_full_chg_mq: high = 0x1, low = 0x90, raw = 0x190, mq = 3125
[ 2.173383] [4: swapper/0: 1] [sm5720_fuelgauge_probe]IRQ_BASE(353) FG_IRQ(388)
[ 2.176415] [4: swapper/0: 1] sm5720_fg_alert_init: fg_irq= 0x184, REG_CNTL=0xc401, SOC_ALARM=0x100
[ 2.180627] [4: swapper/0: 1] sm5720_fuelgauge_probe: SM5720 Fuelgauge Driver Loaded
[ 2.180761] [4: swapper/0: 1] sm5720_charger_init :
[ 2.180913] [4: swapper/0: 1] sm5720-charger sm5720-charger: sm5720_charger_probe: SM5720 Charger Driver Probe Start
[ 2.181096] [4: swapper/0: 1] sm5720_charger_parse_dt: battery,chg_float_voltage is 43500
[ 2.181992] [4: swapper/0: 1] sm5720_get_device_ID: revision=14
[ 2.182056] [4: swapper/0: 1] sm5720_charger_probe : pmic rev 0xe
[ 2.182124] [4: swapper/0: 1] sm5720-charger sm5720-charger: charger initial hardware condition process start. (float_voltage=43500)
[ 2.194975] [4: swapper/0: 1] sm5720_CHG_set_ENWATCHDOG: WDT en = 0
[ 2.199615] [4: swapper/0: 1] sm5720-charger:
[ 2.199667] [4: swapper/0: 1] 0x9:0x21 0xa:0x18
[ 2.199724] [4: swapper/0: 1] 0xb:0x0 0xc:0x10
[ 2.199780] [4: swapper/0: 1] 0xd:0x60 0xe:0x5
[ 2.199835] [4: swapper/0: 1] 0xf:0x38 0x10:0xc
[ 2.199892] [4: swapper/0: 1] 0x11:0x1c 0x12:0xe8
[ 2.199950] [4: swapper/0: 1] 0x13:0x6 0x14:0x64
[ 2.200006] [4: swapper/0: 1] 0x15:0xa 0x16:0x84
[ 2.200063] [4: swapper/0: 1] 0x17:0x10 0x18:0x11
[ 2.200120] [4: swapper/0: 1] 0x19:0x6 0x1a:0xf0
[ 2.200176] [4: swapper/0: 1] 0x1b:0x0 0x1c:0x0
[ 2.200233] [4: swapper/0: 1] sm5720-charger sm5720-charger: charger initial hardware condition process done.
[ 2.205628] [4: swapper/0: 1] sm5720-charger: sm5720_charger_oper_table_init: current table info (STATUS: 0x0, MODE: 5, BST_OUT: 0x1, OTG_CURRENT: 0x0 TX_CURRENT: 0x4
[ 2.234923] [4: swapper/0: 1] sm5720-charger sm5720-charger: SM5720 Charger Driver Loaded
[ 2.235111] [6: swapper/0: 1] mfc_charger_init
[ 2.235554] [6: swapper/0: 1] mfc-charger 25-003b: mfc_charger_probe: MFC Charger Driver Loading
[ 2.235664] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 150
[ 2.235744] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 52 <6>[ 2.235812] [4: kworker/4:0: 25] sm5720-charger sm5720-charger: psy_chg_get_online: INT_STATUS1=0x21
[ 2.235908] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 142
[ 2.235973] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 44 mfc_chg_parse_dt fod WPC data = 150
[ 2.236070] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 28 mfc_chg_parse_dt fod WPC data = 150
[ 2.236166] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 25 mfc_chg_parse_dt fod WPC data = 150
[ 2.236262] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 26 mfc_chg_parse_dt fod WPC data = 156
[ 2.236358] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data = 13 mfc_chg_parse_dt fod PMA data = 150
[ 2.236455] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 52 mfc_chg_parse_dt fod PMA data = 142
[ 2.236551] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 44 mfc_chg_parse_dt fod PMA data = 150
[ 2.236646] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 28 mfc_chg_parse_dt fod PMA data = 150
[ 2.236742] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 25 mfc_chg_parse_dt fod PMA data = 150
[ 2.236837] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 26 mfc_chg_parse_dt fod PMA data = 156
[ 2.236932] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data = 13 mfc_chg_parse_dt fod A4WP data = 150
[ 2.237029] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 52 mfc_chg_parse_dt fod A4WP data = 142
[ 2.237126] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 44 mfc_chg_parse_dt fod A4WP data = 150
[ 2.237223] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 28 mfc_chg_parse_dt fod A4WP data = 150
[ 2.237320] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 25 mfc_chg_parse_dt fod A4WP data = 150
[ 2.237416] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 26 mfc_chg_parse_dt fod A4WP data = 156
[ 2.237513] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data = 13 mfc_chg_parse_dt fod WPC data_cv = 150
[ 2.237614] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 82 mfc_chg_parse_dt fod WPC data_cv = 142
[ 2.237715] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 74 mfc_chg_parse_dt fod WPC data_cv = 150
[ 2.237815] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 58 mfc_chg_parse_dt fod WPC data_cv = 150
[ 2.237917] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 55 mfc_chg_parse_dt fod WPC data_cv = 150
[ 2.238017] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 56 mfc_chg_parse_dt fod WPC data_cv = 156
[ 2.238117] [6: swapper/0: 1] mfc_chg_parse_dt fod WPC data_cv = 43 mfc_chg_parse_dt fod PMA data_cv = 150
[ 2.238221] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 82 mfc_chg_parse_dt fod PMA data_cv = 142
[ 2.238321] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 74 mfc_chg_parse_dt fod PMA data_cv = 150
[ 2.238421] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 58 mfc_chg_parse_dt fod PMA data_cv = 150
[ 2.238521] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 55 mfc_chg_parse_dt fod PMA data_cv = 150
[ 2.238621] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 56 mfc_chg_parse_dt fod PMA data_cv = 156
[ 2.238720] [6: swapper/0: 1] mfc_chg_parse_dt fod PMA data_cv = 43 mfc_chg_parse_dt fod A4WP data_cv = 150
[ 2.238822] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 82 mfc_chg_parse_dt fod A4WP data_cv = 142
[ 2.238924] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 74 mfc_chg_parse_dt fod A4WP data_cv = 150
[ 2.239025] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 58 mfc_chg_parse_dt fod A4WP data_cv = 150
[ 2.239126] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 55 mfc_chg_parse_dt fod A4WP data_cv = 150
[ 2.239227] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 56 mfc_chg_parse_dt fod A4WP data_cv = 156
[ 2.239329] [6: swapper/0: 1] mfc_chg_parse_dt fod A4WP data_cv = 43 <6>[ 2.239409] [6: swapper/0: 1] mfc_chg_parse_dt wpc_det = 0x3fb, irq_wpc_det = 0x20a
[ 2.239508] [6: swapper/0: 1] mfc_chg_parse_dt wpc_int = 0x5b, irq_wpc_int = 0x111
[ 2.239635] [6: swapper/0: 1] mfc_charger_probe: mfc-charger
[ 2.241069] [6: swapper/0: 1] mfc_charger_probe wc_w_state_irq = 1
[ 2.241156] [6: swapper/0: 1] mfc_charger_probe: call wpc_fw_booting_work for firmware update
[ 2.241256] [6: swapper/0: 1] mfc-charger 25-003b: mfc_charger_probe: MFC Charger Driver Loaded
[ 2.241955] [0: kworker/u16:7: 295] sm5720-charger sm5720-charger: psy_chg_get_charger_status: INT_STATUS2=0x18
[ 2.242055] [6: swapper/0: 1] [SX9320]: sx9320_probe - Probe Start!
[ 2.242164] [6: swapper/0: 1] input: grip_sensor as /devices/virtual/input/input5
[ 2.243077] [6: swapper/0: 1] usb: [M] manager_notifier_register: listener=22 register
[ 2.243179] [6: swapper/0: 1] usb: [M] manager_notifier_register USB: attach=1, drp=USB_ATTACH_UFP
[ 2.243291] [6: swapper/0: 1] [SX9320]: sx9320_probe - Probe done!
[ 2.243561] [6: swapper/0: 1] HRM_dbg : hrm_probe - start
[ 2.243650] [6: swapper/0: 1] HRM_dbg : hrm_parse_dt: success pinctrl_get (ffffffc07220dc80)
[ 2.243758] [6: swapper/0: 1] HRM_dbg : hrm_power_ctrl - onoff : 1, state : 0
[ 2.243936] [6: swapper/0: 1] HRM_dbg : hrm_power_ctrl - onoff = 1
[ 2.244655] [0: kworker/u16:7: 295] sm5720_voffset_cancel: <0 0 100 10> volt_cal = 0x8000, volt_slope = 0x8000, mohm_volt_cal = 0x0
[ 2.245252] [6: swapper/0: 1] mfc_chg_get_property cable_type =0
[ 2.245252] [6: swapper/0: 1]
[ 2.246196] [6: swapper/0: 1] i2c-msm-v2 c17a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x26 (ok)
[ 2.247172] [6: swapper/0: 1] HRM_dbg : __max869_otp_id - 0x8B :6
[ 2.248175] [6: swapper/0: 1] HRM_dbg : __max869_trim_check isTrimmed :32, reg97_val : 32
[ 2.248322] [6: swapper/0: 1] input: hrm_sensor as /devices/virtual/input/input6
[ 2.248594] [6: swapper/0: 1] HRM_dbg : hrm_power_ctrl - onoff : 0, state : 1
[ 2.248728] [6: swapper/0: 1] HRM_dbg : hrm_power_ctrl - onoff = 0
[ 2.248864] [6: swapper/0: 1] HRM_dbg : hrm_probe success
[ 2.248956] [6: swapper/0: 1] [FACTORY] factory_adsp_init
[ 2.249053] [6: swapper/0: 1] [FACTORY] factory_adsp_init: Timer Init
[ 2.249157] [6: swapper/0: 1] [FACTORY] adsp_factory_register - type:16 ptr:ffffffc072249c00
[ 2.249261] [6: swapper/0: 1] [FACTORY] core_factory_init
[ 2.249363] [6: swapper/0: 1] [FACTORY] adsp_factory_register - type:0 ptr:ffffffc07224a000
[ 2.249598] [6: swapper/0: 1] [FACTORY] lsm6dsl_accel_factory_init
[ 2.249706] [6: swapper/0: 1] [FACTORY] adsp_factory_register - type:1 ptr:ffffffc07224a400
[ 2.249812] [6: swapper/0: 1] [FACTORY] lsm6dsl_gyro_factory_init
[ 2.249919] [6: swapper/0: 1] [FACTORY] adsp_factory_register - type:2 ptr:ffffffc07224a800
[ 2.250022] [6: swapper/0: 1] [FACTORY] ak09916c_factory_init
[ 2.250120] [6: swapper/0: 1] [FACTORY] adsp_factory_register - type:3 ptr:ffffffc07224ac00
[ 2.250206] [0: kworker/u16:7: 295] sm5720_adabt_full_offset: curr=457, curr_off=8c, aux_stat=e1,
[ 2.250299] [6: swapper/0: 1] [FACTORY] bmp280_pressure_factory_init
[ 2.250397] [6: swapper/0: 1] [FACTORY] adsp_factory_register - type:4 ptr:ffffffc07224b000
[ 2.250500] [6: swapper/0: 1] [FACTORY] tmd490x_light_factory_init
[ 2.250610] [6: swapper/0: 1] [FACTORY] adsp_factory_register - type:5 ptr:ffffffc07224b400
[ 2.250716] [6: swapper/0: 1] [FACTORY] tmd490x_prox_factory_init
[ 2.250921] [6: swapper/0: 1] [FACTORY] initialize_mobeam
[ 2.251018] [6: swapper/0: 1] [FACTORY] adsp_factory_register - type:17 ptr:ffffffc07224bc00
[ 2.251124] [6: swapper/0: 1] [FACTORY] hh_hole_factory_init
[ 2.251360] [6: swapper/0: 1] [VIB] of_sm5720_haptic_dt: mode: 1
[ 2.251442] [6: swapper/0: 1] [VIB] of_sm5720_haptic_dt: divisor: 128
[ 2.251526] [6: swapper/0: 1] [VIB] ++ sm5720_haptic_probe
[ 2.254932] [6: swapper/0: 1] [VIB] -- sm5720_haptic_probe
[ 2.255022] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=17
[ 2.255132] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=16
[ 2.255225] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=15
[ 2.255316] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=14
[ 2.255405] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=13
[ 2.255496] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=12
[ 2.255586] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=11
[ 2.255676] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=10
[ 2.255766] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=9
[ 2.255853] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=8
[ 2.255944] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=7
[ 2.256033] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=6
[ 2.256124] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=5
[ 2.256211] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=4
[ 2.256301] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=3
[ 2.256390] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=2
[ 2.256476] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=1
[ 2.256563] I[6: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=0
[ 2.256677] [6: kworker/6:1: 357] [FACTORY] stop_raw_data_worker: flag=3ffff
[ 2.257092] [6: swapper/0: 1] [VIB]: ss_vibrator_probe
[ 2.257187] [6: swapper/0: 1] vibrator_parse_dt:491, en gpio not specified
[ 2.257313] [6: swapper/0: 1] boost_power_on, request[MOTOR][OFF] motor[0], hrm[0]
[ 2.259448] [6: swapper/0: 1] [VIB] sm5720_vibtonz_en: running!
[ 2.259641] [6: swapper/0: 1] [VIB] drv2624_init
[ 2.259734] [6: swapper/0: 1] ccic_notifier_init
[ 2.259798] [6: swapper/0: 1] ccic_notifier_init already registered
[ 2.259940] [6: swapper/0: 1] usbpd-s2mm005 7-0033: hw_rev:12 usbpd_irq = 50 s2mm005_om = -2
[ 2.259940] [6: swapper/0: 1] s2mm005_sda = -2, s2mm005_scl = -2
[ 2.260124] [6: swapper/0: 1] usbpd-s2mm005 7-0033: s2mm005_usbpd_probe:IRQ NUM 232
[ 2.260273] [4: kworker/u16:7: 295] sm5720_vbatocv_check: mode change to mix RS auto mode
[ 2.260369] [6: swapper/0: 1] usbpd-s2mm005 7-0033: probed, irq 50
[ 2.262242] [6: swapper/0: 1] s2mm005_usbpd_probe CHIP HWversion 1 0 0 6
[ 2.263097] [6: swapper/0: 1] s2mm005_usbpd_probe CHIP SWversion 1 0 35 7
[ 2.263191] [6: swapper/0: 1] s2mm005_usbpd_probe SRC SWversion: 1, 0,35, 7
[ 2.263282] [6: swapper/0: 1] s2mm005_usbpd_probe: FW UPDATE boot:7 hw_rev:12
[ 2.264134] [6: swapper/0: 1] s2mm005_usbpd_probe CHIP SWversion 1 0 35 7
[ 2.264226] [6: swapper/0: 1] usbpd-s2mm005 7-0033: --- Read Data on TX_SNK_CAPA_MSG(0x220)
[ 2.264226] [6: swapper/0: 1]
[ 2.264378] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00001444
[ 2.264378] [6: swapper/0: 1]
[ 2.264509] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x36019032
[ 2.264509] [6: swapper/0: 1]
[ 2.264637] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.264637] [6: swapper/0: 1]
[ 2.264747] [4: kworker/u16:7: 295] sm5720_cal_carc: <0 6 1 11 -1 1 6 1 9 1>, temp_fg = 224 ,p_curr_cal = 0x70, n_curr_cal = 0x8f, batt_temp = 300
[ 2.264873] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.264873] [6: swapper/0: 1]
[ 2.264999] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.264999] [6: swapper/0: 1]
[ 2.265157] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.265157] [6: swapper/0: 1]
[ 2.265284] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.265284] [6: swapper/0: 1]
[ 2.265411] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.265411] [6: swapper/0: 1]
[ 2.265540] [6: swapper/0: 1] usbpd-s2mm005 7-0033: --- Write DATA
[ 2.265540] [6: swapper/0: 1]
[ 2.265667] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00002444
[ 2.265667] [6: swapper/0: 1]
[ 2.265795] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x36019032
[ 2.265795] [6: swapper/0: 1]
[ 2.265921] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x8F019032
[ 2.265921] [6: swapper/0: 1]
[ 2.266050] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.266050] [6: swapper/0: 1]
[ 2.266177] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.266177] [6: swapper/0: 1]
[ 2.266302] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.266302] [6: swapper/0: 1]
[ 2.266430] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.266430] [6: swapper/0: 1]
[ 2.266557] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.266557] [6: swapper/0: 1]
[ 2.266873] [4: kworker/u16:7: 295] sm5720_cal_carc: <0 2 1 2 1 1 2 3 2 3>, p_curr_cal = 0x70, n_curr_cal = 0x8f, mix_factor=0x146 ,curr_cal = 0x8f70
[ 2.267525] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.267525] [6: swapper/0: 1]
[ 2.267649] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.267649] [6: swapper/0: 1]
[ 2.267774] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.267774] [6: swapper/0: 1]
[ 2.267899] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.267899] [6: swapper/0: 1]
[ 2.268027] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.268027] [6: swapper/0: 1]
[ 2.268155] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.268155] [6: swapper/0: 1]
[ 2.268284] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.268284] [6: swapper/0: 1]
[ 2.268408] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.268408] [6: swapper/0: 1]
[ 2.269423] [6: swapper/0: 1] usbpd-s2mm005 7-0033: --- Read 2 new Data on TX_SNK_CAPA_MSG(0x220)
[ 2.269423] [6: swapper/0: 1]
[ 2.269549] [4: kworker/u16:7: 295] sm5720_fg_check_reg_init_need: SM5720_REG_FG_OP_STATUS : 0x10 , return FALSE NO init need
[ 2.269660] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00002444
[ 2.269660] [6: swapper/0: 1]
[ 2.269787] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x36019032
[ 2.269787] [6: swapper/0: 1]
[ 2.269914] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x8F019032
[ 2.269914] [6: swapper/0: 1]
[ 2.270040] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.270040] [6: swapper/0: 1]
[ 2.270166] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.270166] [6: swapper/0: 1]
[ 2.270287] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.270287] [6: swapper/0: 1]
[ 2.270411] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.270411] [6: swapper/0: 1]
[ 2.270535] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 0x00000000
[ 2.270535] [6: swapper/0: 1]
[ 2.270661] [6: swapper/0: 1] S2MM005 LPM_ENABLE
[ 2.270919] [6: swapper/0: 1] dual_role_get_local_prop : usbpd_data is null : request prop = 1
[ 2.271028] [6: swapper/0: 1] dual_role_usb otg_default: driver failed to report `mode' property: -22
[ 2.271163] [6: kworker/6:1: 357] dual_role_get_local_prop : usbpd_data is null : request prop = 1
[ 2.271270] [6: kworker/6:1: 357] dual_role_usb otg_default: driver failed to report `mode' property: -22
[ 2.271407] [6: swapper/0: 1] set_host_turn_on_event : current_set is 0!
[ 2.271611] [6: swapper/0: 1] s2mm005_usbpd_probe : current_irq_status = 0
[ 2.271702] [6: swapper/0: 1] s2mm005_init_detect_irq : irq_thread is already registered
[ 2.271807] [6: swapper/0: 1] usbpd-s2mm005 7-0033: 1 times
[ 2.271881] [6: swapper/0: 1] usbpd-s2mm005 7-0033: IRQ0:00
[ 2.271954] [6: swapper/0: 1] process_cc_attach
[ 2.272016] [6: swapper/0: 1] process_cc_water
[ 2.272334] [6: swapper/0: 1] usbpd-s2mm005 7-0033: process_cc_water: WATER reg:0xA1 WATER=0 DRY=1
[ 2.272700] [6: swapper/0: 1] usbpd-s2mm005 7-0033: Rsvd_H:0x99 PD_Nxt_State:0xFF Rsvd_L:0x42 PD_State:21
[ 2.272824] [6: swapper/0: 1] usbpd-s2mm005 7-0033: func_state :0x99FF4215, is_dfp : 0, is_src : 0
[ 2.272933] [6: swapper/0: 1] usbpd-s2mm005 7-0033: ccic reset detected
[ 2.273020] [6: swapper/0: 1] usbpd-s2mm005 7-0033: process_cc_attach 603: pd_state:21, is_host = 0, is_client = 0
[ 2.273148] [6: swapper/0: 1] usb: ccic_event_work
[ 2.273225] [6: swapper/0: 1] usb: ccic_event_work
[ 2.273292] [1: kworker/u16:5: 293] usb:ccic_event_notifier, dest=MUIC, id=ID_ATTACH, sub1=1, sub2=0, sub3=0
[ 2.273410] [1: kworker/u16:5: 293] ccic_notifier_notify: src:5 dest:4 id:01 attach:01 cable_type:00 rprd:0
[ 2.273525] [1: kworker/u16:5: 293] usb: [M] manager_handle_ccic_notification: src:CCIC dest:MUIC id:ID_ATTACH attach/rid:1
[ 2.273652] [1: kworker/u16:5: 293] usb: [M] manager_handle_ccic_notification: CCIC_NOTIFY_ATTACH
[ 2.273757] [1: kworker/u16:5: 293] usb: [M] manager_notifier_notify: src:CCIC dest:MUIC id:ID_ATTACH sub1:01 sub2:00 sub3:00
[ 2.273890] [1: kworker/u16:5: 293] muic_handle_ccic_notification: Rcvd Noti=> action: 1 src:5 dest:4 id:1 sub[1 0 0]
[ 2.274015] [1: kworker/u16:5: 293] mdev_show_status: mdev:0 rid:0 rprd:0 attached:0 legacy_dev:1
[ 2.274121] [1: kworker/u16:5: 293] muic_handle_ccic_notification: CCIC_NOTIFY_ID_ATTACH: Attached
[ 2.274229] [1: kworker/u16:5: 293] muic_handle_ccic_ATTACH: src:5 dest:4 id:1 attach:1 cable_type:0 rprd:0
[ 2.274342] [1: kworker/u16:5: 293] muic_handle_ccic_ATTACH: Attach
[ 2.274419] [1: kworker/u16:5: 293] muic_handle_ccic_ATTACH: Valid VBUS-> handled in irq handler
[ 2.274522] [1: kworker/u16:5: 293] mdev_show_status: mdev:0 rid:0 rprd:0 attached:1 legacy_dev:1
[ 2.274630] [6: swapper/0: 1] usb: ccic_event_work, dest=1, sub2(event)=2, usbpd_data->data_role=0, usbpd_data->try_state_change=0
[ 2.274801] [6: kworker/6:1: 357] dual_role_get_local_prop : request prop = 1 , attached_state = 2, power_role = 1
[ 2.274928] [6: kworker/6:1: 357] dual_role_get_local_prop : request prop = 2 , attached_state = 2, power_role = 1
[ 2.275087] [6: kworker/6:1: 357] dual_role_get_local_prop : request prop = 3 , attached_state = 2, power_role = 1
[ 2.275211] [7: swapper/0: 1] process_cc_get_int_status
[ 2.276674] [7: swapper/0: 1] usbpd-s2mm005 7-0033: SYNC Status = 0x00000010
[ 2.276769] [7: swapper/0: 1] usbpd-s2mm005 7-0033: CTRL MSG Status = 0x00004E00
[ 2.276863] [7: swapper/0: 1] usbpd-s2mm005 7-0033: DATA MSG Status = 0x00002100
[ 2.276957] [7: swapper/0: 1] usbpd-s2mm005 7-0033: EXTD MSG Status = 0x00000000
[ 2.277049] [4: kworker/u16:7: 295] sm5720_fg_test_read: 0xA0=0x1400, 0xAC=0x1400, 0xAD=0x2076, 0xAE=0x2266, 0xAF=0x2400, 0x28=0x05ec, 0x2F=0x0108, 0x01=0xc401, SM5720_ID=0x000e
[ 2.277233] [7: swapper/0: 1] usbpd-s2mm005 7-0033: MSG IRQ Status = 0x80020148
[ 2.277328] [7: swapper/0: 1] usbpd-s2mm005 7-0033: VDM IRQ Status = 0x00000002
[ 2.277421] [7: swapper/0: 1] usbpd-s2mm005 7-0033: SSM_MSG IRQ Status = 0x00000000
[ 2.277517] [7: swapper/0: 1] usbpd-s2mm005 7-0033: AP REQ GET Status = 0x00000000
[ 2.277611] [7: swapper/0: 1] usbpd-s2mm005 7-0033: 0x50 IRQ Status = 0x00000007
[ 2.277701] [7: swapper/0: 1] usbpd-s2mm005 7-0033: 0x54 IRQ Status = 0x00000000
[ 2.277800] [7: swapper/0: 1] usbpd-s2mm005 7-0033: 0x58 IRQ Status = 0x00000000
[ 2.277896] [7: swapper/0: 1] usbpd-s2mm005 7-0033: - IRQ bFlag_Ctrl_Accept
[ 2.277991] [7: swapper/0: 1] usbpd-s2mm005 7-0033: - IRQ bFlag_Ctrl_PS_RDY
[ 2.278085] [7: swapper/0: 1] usbpd-s2mm005 7-0033: - IRQ bFlag_Ctrl_Get_Sink_Cap
[ 2.278186] [7: swapper/0: 1] usbpd-s2mm005 7-0033: - IRQ bFlag_Data_SRC_Capability
[ 2.278287] [7: swapper/0: 1] usbpd-s2mm005 7-0033: - IRQ bFlag_Data_Vender_Defined
[ 2.278388] [7: swapper/0: 1] usbpd-s2mm005 7-0033: receive_alternate_message : bFLAG_Vdm_Discover_ID
[ 2.278499] [7: swapper/0: 1] usbpd-s2mm005 7-0033: process_alternate_mode, mode : 0x1
[ 2.278602] [7: swapper/0: 1] usb_notify: is_blocked otg_notify is null
[ 2.279580] [7: swapper/0: 1] usbpd-s2mm005 7-0033: process_discover_identity Vendor_ID : 0x0, Product_ID : 0x0 Device Version 0x0
[ 2.279724] [7: swapper/0: 1] set_enable_alternate_mode : mode is reset! check_is_driver_loaded=0, prev_alternate_mode=0
[ 2.279853] [7: swapper/0: 1] process_pd
[ 2.279910] [7: swapper/0: 1] usbpd-s2mm005 7-0033: rp_currentlvl:0x02, is_source:0x00
[ 2.280008] [7: swapper/0: 1] process_pd : SRC requested SINK Cap
[ 2.280984] [7: swapper/0: 1] usbpd-s2mm005 7-0033:
[ 2.281053] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rd_SRC_CAPA_0 : 0x1161
[ 2.281143] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rd_SRC_CAPA_1 : 0x26019096
[ 2.281236] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rd_SRC_CAPA_2 : 0x0
[ 2.281321] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rd_SRC_CAPA_3 : 0x0
[ 2.281405] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rd_SRC_CAPA_4 : 0x0
[ 2.281490] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rd_SRC_CAPA_5 : 0x0
[ 2.281573] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rd_SRC_CAPA_6 : 0x0
[ 2.281663] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rd_SRC_CAPA_7 : 0x0
[ 2.281750] [7: swapper/0: 1] usbpd-s2mm005 7-0033: =======================================
[ 2.281857] [7: swapper/0: 1] usbpd-s2mm005 7-0033: MSG Header
[ 2.281937] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rsvd_msg_header : 0
[ 2.282034] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Number_of_obj : 1
[ 2.282131] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Message_ID : 0
[ 2.282227] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Port_Power_Role : 1
[ 2.282322] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Specification_Revision : 1
[ 2.282424] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Port_Data_Role : 1
[ 2.282521] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Rsvd2_msg_header : 0
[ 2.282618] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Message_Type : 1
[ 2.282716] [7: swapper/0: 1] usbpd-s2mm005 7-0033: =================
[ 2.282803] [7: swapper/0: 1] usbpd-s2mm005 7-0033: PDO_Num : 1
[ 2.282885] [7: swapper/0: 1] usbpd-s2mm005 7-0033: PDO_Parameter(FIXED_SUPPLY) : 0
[ 2.282984] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Dual_Role_Power : 1
[ 2.283078] [7: swapper/0: 1] usbpd-s2mm005 7-0033: USB_Suspend_Support : 0
[ 2.283178] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Externally_POW : 0
[ 2.283275] [7: swapper/0: 1] usbpd-s2mm005 7-0033: USB_Comm_Capable : 1
[ 2.283372] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Data_Role_Swap : 1
[ 2.283470] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Reserved : 0
[ 2.283565] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Peak_Current : 0
[ 2.283661] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Voltage_Unit : 100
[ 2.283759] [7: swapper/0: 1] usbpd-s2mm005 7-0033: Maximum_Current : 150
[ 2.283854] [7: swapper/0: 1] usbpd-s2mm005 7-0033: =======================================
[ 2.284851] [7: swapper/0: 1] process_pd : Object_posision(1), available_pdo_num(1), selected_pdo_num(0)
[ 2.284970] [7: swapper/0: 1] process_pd : PDO is not selected yet by default
[ 2.285090] [7: swapper/0: 1] usb: ccic_event_work
[ 2.285168] [7: swapper/0: 1] process_cc_rid
[ 2.285425] [7: swapper/0: 1] usbpd-s2mm005 7-0033: prev_rid:7 , RID:7
[ 2.285517] [7: swapper/0: 1] usbpd-s2mm005 7-0033: IRQ1:01
[ 2.285849] [7: swapper/0: 1] sec_smem_probe vendor1->apps_stat.clk = 0000000082041438
[ 2.286042] [7: swapper/0: 1] sec_debug_partition_init: start
[ 2.286242] [7: swapper/0: 1] sec_debug_partition_init: end
[ 2.286355] [7: swapper/0: 1] [NXP-P61] Entry : p61_dev_init
[ 2.286445] [7: swapper/0: 1] p61_probe: chip select(0), bus number(1)
[ 2.286532] [7: swapper/0: 1] p61_parse_dt: ap_vendor - qualcomm
[ 2.286612] [7: swapper/0: 1] p61_probe: tz_mode=0, isGpio_cfgDone:0
[ 2.286694] [7: swapper/0: 1] p61_probe: eSE Secured system
[ 2.286808] [7: swapper/0: 1] p61_probe: finished
[ 2.286884] [7: swapper/0: 1] Loading pn547 driver
[ 2.287081] [7: swapper/0: 1] pn547_probe entered
[ 2.287321] [7: swapper/0: 1] pn547_parse_dt LDO nfc_pvdd :nfc_vdd
[ 2.287402] [7: swapper/0: 1] pn547_parse_dt: irq : 92, ven : 306, firm : 307
[ 2.287497] [7: swapper/0: 1] pcal6524_gpio_request gpio 6
[ 2.287570] [7: swapper/0: 1] pcal6524_gpio_request gpio 7
[ 2.287643] [7: swapper/0: 1] pcal6524_gpio_request gpio 1
[ 2.287716] [7: swapper/0: 1] pn547_regulator_onoff - onoff = 1
[ 2.287857] [7: swapper/0: 1] pn547_regulator_onoff - onoff = 1
[ 2.289074] [7: swapper/0: 1] pn547_probe : IRQ num 274
[ 2.289171] [7: swapper/0: 1] pn547_probe : requesting IRQ 274
[ 2.289249] [7: swapper/0: 1] pcal6524_gpio_direction_output(off=[6], val=[0])
[ 2.290200] [7: swapper/0: 1] pcal6524_gpio_direction_output(off=[7], val=[0])
[ 2.291069] [7: swapper/0: 1] pcal6524_gpio_direction_output(off=[1], val=[0])
[ 2.292803] [4: kworker/u16:7: 295] sm5720_fg_test_read: 0xB0=0x0000, 0xBC=0x11e5, 0xBD=0x1319, 0xBE=0x178c, 0xBF=0x178c, 0x85=0x02f3, 0x86=0x025d, 0x87=0x16e7, 0x1F=0x0050, 0x94=0x00e1
[ 2.294322] [4: kworker/u16:7: 295] sm5720_update_all_value: chg_h=0, chg_f=0, chg_s=1, is_chg=0, ta_exist=0, v=4349, v_avg=4349, i=542, i_avg=542, ocv=4269, fg_t=224, b_t=300, cycle=0, soc=972, state=0xe, capacity_max=1000
[ 2.295841] [4: kworker/u16:7: 295] sm5720_meas_mq_dump: AUX_2 : <0x8000>
[ 2.301940] [1: kworker/u16:5: 293] muic_print_reg_dump:CT:1e IM1:fc IM2:7e IM3:80 MS1:0 MS2:0 ADC:1f DT1:4 DT2:0 DT3:0 RS1:1 RS2:26 CTY:4 AFC:0 TXD:79 AST:0 VO1:0 VO2:0 ATT:0 H3C:0 H3D:0
[ 2.302103] [1: kworker/u16:5: 293] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.302186] [1: kworker/u16:5: 293] ccic_notifier_notify: notify done(0x0)
[ 2.302266] [1: kworker/u16:5: 293] usb:ccic_event_notifier, dest=USB, id=ID_USB, attach=Attached, drp=USB_ATTACH_UFP
[ 2.302371] [1: kworker/u16:5: 293] ccic_notifier_notify: src:5 dest:1 id:03 sub1:1 sub2:02 sub3:00
[ 2.302463] [1: kworker/u16:5: 293] usb: [M] manager_handle_ccic_notification: src:CCIC dest:USB id:ID_USB attach/rid:1
[ 2.302570] [1: kworker/u16:5: 293] usb: [M] manager_notifier_notify: src:CCIC dest:USB id:ID_USB sub1:01 sub2:02 sub3:00
[ 2.302677] [1: kworker/u16:5: 293] ccic_notifier_notify: notify done(0x0)
[ 2.302754] [1: kworker/u16:5: 293] usb:ccic_event_notifier, dest=BATTERY, id=ID_POWER_STATUS, sub1=1, sub2=0, sub3=0
[ 2.302860] [1: kworker/u16:5: 293] ccic_notifier_notify: src:5 dest:2 id:04 attach:01 cable_type:00 rprd:0
[ 2.302958] [1: kworker/u16:5: 293] usb: [M] manager_handle_ccic_notification: src:CCIC dest:BATTERY id:ID_POWER_STATUS attach/rid:1
[ 2.303074] [1: kworker/u16:5: 293] usb: [M] manager_handle_ccic_notification: PD charger + UFP
[ 2.303164] [1: kworker/u16:5: 293] usb: [M] manager_notifier_notify: src:CCIC dest:BATTERY id:ID_POWER_STATUS sub1:01 sub2:00 sub3:00
[ 2.303284] [1: kworker/u16:5: 293] usb: [M] manager_notifier_notify: notify done(0x0)
[ 2.303402] [1: kworker/u16:5: 293] ccic_notifier_notify: notify done(0x0)
[ 2.308764] [7: swapper/0: 1] i2c-msm-v2 c179000.i2c: msm_bus_scale_register_client(mstr-id:86):0x27 (ok)
[ 2.309058] [7: swapper/0: 1] pn547_probe : i2c addr(0x2B), ret(4)
[ 2.309792] [7: swapper/0: 1] pn547_probe : success, i2c_probe(4)
[ 2.309888] [7: swapper/0: 1] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 6.3
[ 2.310179] [7: swapper/0: 1] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-400A-V007-20170110_234013_24142_56083
[ 2.310472] [7: swapper/0: 1] Loading t-base-tui module.
[ 2.310535] [7: swapper/0: 1] t-base-QC-MSM8996-Android-400A-V007-20170110_234013_24142_56083
[ 2.310651] [7: swapper/0: 1] vfsspi_init vfsspi_init
[ 2.310969] [7: swapper/0: 1] vfsspi_probe
[ 2.311019] [7: swapper/0: 1] vfsspi_parse_dt: not set sleepPin in dts
[ 2.311109] [7: swapper/0: 1] vfsspi_parse_dt: drdyPin=127
[ 2.311187] [7: swapper/0: 1] vfsspi_parse_dt: ldo_pin=74
[ 2.311247] [7: swapper/0: 1] vfsspi_parse_dt: not use btp_regulator
[ 2.311315] [7: swapper/0: 1] vfsspi_parse_dt: ldocontrol=0, min_cpufreq_limit=2150400
[ 2.311396] [7: swapper/0: 1] vfsspi_parse_dt: chipid: NAMSAN
[ 2.311458] [7: swapper/0: 1] vfsspi_parse_dt: adm: 1
[ 2.311515] [7: swapper/0: 1] vfsspi_parse_dt: orient=0
[ 2.311574] [7: swapper/0: 1] vfsspi_platformInit
[ 2.311659] [7: swapper/0: 1] vfsspi_platformInit : platformInit success!
[ 2.311911] [7: swapper/0: 1] vfsspi_probe successful
[ 2.311981] [7: swapper/0: 1] vfsspi_init init is successful
[ 2.312105] [7: swapper/0: 1] usbcore: registered new interface driver snd-usb-audio
[ 2.314145] [7: swapper/0: 1] [MAX98506_DEBUG] max98506_i2c_probe: enter, device 'max98506'
[ 2.314239] [7: swapper/0: 1] max98506 18-0031: There is no log_class property.
[ 2.314319] [7: swapper/0: 1] max98506 18-0031: Sub-device register was not found.
[ 2.314400] [7: swapper/0: 1] max98506 18-0031: There is no interleave information.
[ 2.314482] [7: swapper/0: 1] [MAX98506_DEBUG] max98506_i2c_probe: use DSM(0)
[ 2.314579] [7: swapper/0: 1] [MAXIM_DSM] maxdsm_update_param_info: version=35, platform_type=0
[ 2.314672] [7: swapper/0: 1] [MAXIM_DSM] maxdsm_update_param_info: version=41, platform_type=1
[ 2.314805] [7: swapper/0: 1] [MAX98506_DEBUG] max98506_i2c_probe: exit, device 'max98506'
[ 2.315131] [7: swapper/0: 1] [MAXIM_DSM_CAL] maxdsm_cal_init: g_class=ffffffc0f7f9a780 ffffffc0f7f9a780
[ 2.315238] [7: swapper/0: 1] [MAXIM_DSM_CAL] maxdsm_cal_init: Completed initialization
[ 2.315599] [7: swapper/0: 1] [MAXIM_DSM_POWER] maxdsm_power_init: class=ffffffc0f7f9a780 ffffffc0f7f9a780
[ 2.315696] [7: swapper/0: 1] [MAXIM_DSM_POWER] maxdsm_power_init: Completed initialization
[ 2.322539] [7: swapper/0: 1] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx group_id: 0x9100
[ 2.322784] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0 dev_id: 0x9000
[ 2.322963] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 2.323118] [7: swapper/0: 1] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx group_id: 0x9101
[ 2.323363] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0 dev_id: 0x9001
[ 2.323546] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 2.323697] [7: swapper/0: 1] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx group_id: 0x9110
[ 2.323933] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0 dev_id: 0x9010
[ 2.324117] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 2.324272] [7: swapper/0: 1] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
[ 2.324501] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
[ 2.324681] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 2.324827] [7: swapper/0: 1] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
[ 2.325084] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
[ 2.325265] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 2.325423] [7: swapper/0: 1] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
[ 2.325657] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
[ 2.325839] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 2.325987] [7: swapper/0: 1] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
[ 2.326229] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
[ 2.326410] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 2.326566] [7: swapper/0: 1] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
[ 2.326799] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
[ 2.326979] [7: swapper/0: 1] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 2.327798] [7: swapper/0: 1] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
[ 2.330076] [7: swapper/0: 1] samsung_q6audio_adaptation_probe: dev name soc:samsung,q6audio-adaptation
[ 2.337190] [7: swapper/0: 1] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.337558] [7: swapper/0: 1] GACT probability NOT on
[ 2.337624] [7: swapper/0: 1] Mirror/redirect action on
[ 2.337694] [7: swapper/0: 1] u32 classifier
[ 2.337744] [7: swapper/0: 1] Actions configured
[ 2.337818] [7: swapper/0: 1] Netfilter messages via NETLINK v0.30.
[ 2.337905] [7: swapper/0: 1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.338142] [7: swapper/0: 1] ctnetlink v0.93: registering with nfnetlink.
[ 2.338481] [7: swapper/0: 1] xt_time: kernel timezone is -0000
[ 2.338667] [7: swapper/0: 1] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.338812] [7: swapper/0: 1] arp_tables: (C) 2002 David S. Miller
[ 2.338909] [7: swapper/0: 1] Initializing XFRM netlink socket
[ 2.339102] [7: swapper/0: 1] NET: Registered protocol family 10
[ 2.339693] [7: swapper/0: 1] mip6: Mobile IPv6
[ 2.339797] [7: swapper/0: 1] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.339968] [7: swapper/0: 1] sit: IPv6 over IPv4 tunneling driver
[ 2.340204] [7: swapper/0: 1] NET: Registered protocol family 17
[ 2.340278] [7: swapper/0: 1] NET: Registered protocol family 15
[ 2.340369] [7: swapper/0: 1] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.340515] [7: swapper/0: 1] Bridge firewalling registered
[ 2.340579] [7: swapper/0: 1] Ebtables v2.0 registered
[ 2.340705] [7: swapper/0: 1] l2tp_core: L2TP core driver, V2.0
[ 2.340777] [7: swapper/0: 1] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 2.340861] [7: swapper/0: 1] l2tp_netlink: L2TP netlink interface
[ 2.340941] [7: swapper/0: 1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 2.341021] [7: swapper/0: 1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 2.341471] [7: swapper/0: 1] NET: Registered protocol family 27
[ 2.341629] [7: swapper/0: 1] ncm: Network Context Metadata Module: initialized
[ 2.346161] [2: kworker/u16:8: 370] subsys-pil-tz 17300000.qcom,lpass: for adsp segments only will be dumped.
[ 2.348718] [2: kworker/u16:8: 370] subsys-pil-tz 5c00000.qcom,ssc: for slpi segments only will be dumped.
[ 2.349255] [0: kworker/u16:3: 274] sd 0:0:0:0: [sda] sd_revalidate_disk
[ 2.349461] [2: kworker/u16:8: 370] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
[ 2.349916] [2: kworker/u16:8: 370] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node pil_mba_region
[ 2.350405] [2: kworker/u16:8: 370] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
[ 2.350804] [2: kworker/u16:8: 370] msm-dwc3 a800000.ssusb: USB core frequency = 120000000
[ 2.350973] [2: kworker/u16:8: 370] msm-dwc3 a800000.ssusb: setting lpm_to_suspend_delay to zero.
[ 2.351705] [2: kworker/u16:8: 370] msm-dwc3 a800000.ssusb: missing TCSR memory resource
[ 2.353384] [0: kworker/u16:3: 274] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25
[ 2.355163] [3: kworker/u16:3: 274] sd 0:0:0:0: [sda] sd_revalidate_disk
[ 2.355436] [2: kworker/u16:0: 6] sd 0:0:0:1: [sdb] sd_revalidate_disk
[ 2.355641] [0: kworker/u16:4: 292] sd 0:0:0:3: [sdd] sd_revalidate_disk
[ 2.356685] [4: kworker/u16:7: 295] sm5720_meas_mq_dump: SM5720_FG_REG_MQ : <0x18e> OK count = 0
[ 2.356783] [4: kworker/u16:7: 295] sm5720_fg_get_scaled_capacity : battery is not initailized
[ 2.356887] [4: kworker/u16:7: 295] sps:BAM 0x000000000a904000 is registered.
[ 2.356964] [4: kworker/u16:7: 295] mfc_wpc_fw_booting_work: battery capacity (97)
[ 2.357053] [4: kworker/u16:7: 295] sm5720-charger sm5720-charger: CHG:POWER_SUPPLY_PROP_CHARGE_UNO_CONTROL - ON
[ 2.357431] [2: kworker/2:1: 70] msm-dwc3 a800000.ssusb: (null) state
[ 2.357564] [2: kworker/u16:8: 370] dwc3_msm_probe : dwc3_msm_probe_done = 1
[ 2.357886] [4: kworker/u16:7: 295] sm5720-charger: sm5720_charger_oper_push_event: event_type=6, enable=1
[ 2.357998] [4: kworker/u16:7: 295] sm5720-charger: sm5720_charger_oper_change_state: New table[1] info (STATUS: 0x40, MODE: 5, BST_OUT: 0x1, OTG_CURRENT: 0x0 TX_CURRENT: 0x4
[ 2.358155] [2: kworker/u16:8: 370] sec-thermistor soc:sec_thermistor@0: sec-ap-thermistor successfully probed.
[ 2.358278] [4: kworker/u16:7: 295] sm5720-charger: sm5720_charger_oper_push_event: event_type=2, enable=1
[ 2.358372] [0: kworker/u16:2: 63] sd 0:0:0:2: [sdc] sd_revalidate_disk
[ 2.358814] [2: kworker/u16:8: 370] sec-thermistor soc:sec_thermistor@2: sec-pa-thermistor successfully probed.
[ 2.359575] [4: kworker/u16:7: 295] sm5720-charger: sm5720_charger_oper_change_state: New table[4] info (STATUS: 0x44, MODE: 2, BST_OUT: 0x1, OTG_CURRENT: 0x0 TX_CURRENT: 0x4
[ 2.359717] [4: kworker/u16:7: 295] mfc_uno_on: ENABLE
[ 2.366293] [2: kworker/u16:0: 6] sdb: sdb1
[ 2.366718] [2: kworker/u16:0: 6] sd 0:0:0:1: [sdb] sd_revalidate_disk
[ 2.367932] [4: kworker/u16:8: 370] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.368168] [4: kworker/u16:8: 370] ipa ipa3_smp2p_probe:5400 failed to enable irq wake
[ 2.374661] [0: kworker/u16:2: 63] sdc: sdc1
[ 2.374861] [4: kworker/u16:8: 370] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.375638] [7: swapper/0: 1] Registered cp15_barrier emulation handler
[ 2.375738] [7: swapper/0: 1] Registered setend emulation handler
[ 2.375854] [0: kworker/u16:2: 63] sd 0:0:0:2: [sdc] sd_revalidate_disk
[ 2.375920] [7: swapper/0: 1] Creating CPU group 0
[ 2.375973] [7: swapper/0: 1] Init CPU0 state
[ 2.376052] [7: swapper/0: 1] Init CPU1 state
[ 2.376108] [7: swapper/0: 1] Init CPU2 state
[ 2.376159] [7: swapper/0: 1] Init CPU3 state
[ 2.376364] [7: swapper/0: 1] Creating CPU group 4
[ 2.376426] [7: swapper/0: 1] Init CPU4 state
[ 2.376485] [7: swapper/0: 1] Init CPU5 state
[ 2.376547] [7: swapper/0: 1] Init CPU6 state
[ 2.376604] [7: swapper/0: 1] Init CPU7 state
[ 2.377062] [7: swapper/0: 1] zswap: loaded using pool lz4/zsmalloc
[ 2.377591] [7: swapper/0: 1] Key type encrypted registered
[ 2.378805] [7: swapper/0: 1] msm_smem 86000000.qcom,smem: for smem segments only will be dumped.
[ 2.378969] [3: kworker/u16:4: 292] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15 sdd16 sdd17 sdd18 sdd19 sdd20 sdd21 sdd22
[ 2.380674] [3: kworker/u16:4: 292] sd 0:0:0:3: [sdd] sd_revalidate_disk
[ 2.381917] [7: swapper/0: 1] scm_call failed: func id 0x42001601, ret: -2, syscall returns: 0x0, 0x0, 0x0
[ 2.382170] [7: swapper/0: 1] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
[ 2.382398] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_cpz_cb1 to group 24
[ 2.383422] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 25
[ 2.384002] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 26
[ 2.384591] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 27
[ 2.385164] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 28
[ 2.385325] [0: kworker/0:0: 4] msm_thermal:ts_print tsens[1:332][2:319][3:312][4:335][7:332][8:325][9:341][10:374][13:290][18:298][20:298]
[ 2.386059] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 29
[ 2.386770] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 30
[ 2.387417] [7: swapper/0: 1] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 31
[ 2.399488] [3: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.400567] [7: swapper/0: 1] RNDIS_IPA module is loaded.
[ 2.400906] [7: swapper/0: 1] usb_notifier: notifier_probe
[ 2.400969] [7: swapper/0: 1] usb_notifier: There is not USB 3.0 redriver pin
[ 2.401043] [7: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt: usb30_redriver_en: Invalied gpio pins
[ 2.401138] [7: swapper/0: 1] usb_notifier: redriver_en : -2
[ 2.401215] [7: swapper/0: 1] usb_notifier: disable_control_en : 1
[ 2.401282] [7: swapper/0: 1] usb_notify: registered otg_notify +
[ 2.401462] [7: swapper/0: 1] usb_notify: ovc_init
[ 2.401570] [7: swapper/0: 1] usb_notify: register_usblog_proc already registered
[ 2.401649] [7: swapper/0: 1] usb_notify: registered otg_notify -
[ 2.401715] [7: swapper/0: 1] usb: [M] manager_notifier_register: listener=22 register
[ 2.401797] [7: swapper/0: 1] usb: [M] manager_notifier_register USB: attach=1, drp=USB_ATTACH_UFP
[ 2.401888] [7: swapper/0: 1] usb_notifier: ccic_usb_handle_notification: Turn On Device(UFP)
[ 2.401976] [7: swapper/0: 1] usb_notify: send_otg_notify event=vbus(1) enable=1
[ 2.402053] [7: swapper/0: 1] usb_notify: send_otg_notify reserve event
[ 2.402124] [7: swapper/0: 1] usb_notify: is_blocked type=2, disable_state=0
[ 2.402199] [7: swapper/0: 1] vbus_notifier_register: listener=2 register
[ 2.402272] [7: swapper/0: 1] usb_notifier: vbus_handle_notification cmd=0, vbus_type=LOW
[ 2.402357] [7: swapper/0: 1] usb_notifier soc:usb-notifier: usb notifier probe
[ 2.403180] [7: swapper/0: 1] usb: [M] manager_notifier_init
[ 2.403244] [7: swapper/0: 1] manager_notifier_init already registered
[ 2.405314] [7: swapper/0: 1] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input7
[ 2.406891] [7: swapper/0: 1] hall_init start
[ 2.408917] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.409193] [7: swapper/0: 1] hall_probe called
[ 2.409244] [7: swapper/0: 1] init_hall_ic_irq : success
[ 2.409363] [7: swapper/0: 1] input: hall as /devices/soc/soc:hall/input/input8
[ 2.409459] [7: swapper/0: 1] hall_probe endcertify_hall_init start
[ 2.415050] [7: swapper/0: 1] init_certify_hall_ic_irq : success
[ 2.415173] [7: swapper/0: 1] input: certify_hall as /devices/soc/soc:certify_hall/input/input9
[ 2.416022] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.416314] [7: swapper/0: 1] qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: setting system clock to 2017-01-13 09:55:18 UTC (1484301318)
[ 2.416456] [7: swapper/0: 1] [syscamera][msm_companion_init_module::3191]init companion module
[ 2.420835] [7: swapper/0: 1] [syscamera][msm_companion_probe::3064][E]
[ 2.420938] [7: swapper/0: 1] [syscamera][msm_companion_probe::3118] i2c_func_tbl=cci
[ 2.421061] [7: swapper/0: 1] [syscamera][msm_companion_probe::3154] platform probe success
[ 2.423038] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.423137] [7: swapper/0: 1] qcom_companion spi2.0: irq[0] cs[0] CPHA[0] CPOL[0] CS_HIGH[0]
[ 2.423222] [7: swapper/0: 1] qcom_companion spi2.0: max_speed[24000000]
[ 2.423293] [7: swapper/0: 1] msm_companion_spi_probe: irq[0] cs[0] CPHA[0] CPOL[0] CS_HIGH[0]
[ 2.423379] [7: swapper/0: 1] msm_companion_spi_probe: max_speed[24000000]
[ 2.423451] [7: swapper/0: 1] [syscamera][msm_companion_spi_setup::2883] cell-index 0, rc 0
[ 2.423554] [7: swapper/0: 1] [syscamera][msm_companion_spi_setup::2892] gpio-irq 124
[ 2.423635] [7: swapper/0: 1] [syscamera][msm_companion_spi_setup::2902] companion-device-id 29635, rc 0
[ 2.423966] [5: swapper/0: 1] [syscamera][msm_companion_spi_setup::2989]spi probe success =0 X
[ 2.424076] [5: swapper/0: 1] [syscamera][msm_companion_init_module::3195] rc = 0, spi_rc = 0
[ 2.430764] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.438353] [5: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[GLM_soc]
[ 2.438442] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.438872] [5: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp1-]
[ 2.439246] [5: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp0-]
[ 2.439661] [5: swapper/0: 1] soc:qcom,lmh supply vdd-apss not found, using dummy regulator
[ 2.439771] [5: swapper/0: 1] lmh_lite:lmh_get_sensor_devicetree Error getting ODCM thresh. err:-22
[ 2.445657] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.445943] [5: swapper/0: 1] parse_cpu_levels: idx 1 503
[ 2.446005] [5: swapper/0: 1] parse_cpu_levels: idx 2 1744
[ 2.446066] [5: swapper/0: 1] parse_cpu_levels: idx 2 2222
[ 2.446207] [5: swapper/0: 1] parse_cpu_levels: idx 1 1301
[ 2.446267] [5: swapper/0: 1] parse_cpu_levels: idx 2 1820
[ 2.446327] [5: swapper/0: 1] parse_cpu_levels: idx 2 1999
[ 2.446397] [5: swapper/0: 1] calculate_residency: residency < 0 for LPM
[ 2.452867] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.460230] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.460324] [5: swapper/0: 1] rmnet_ipa3 started initialization
[ 2.462079] [5: swapper/0: 1] qcom,cc-debug-8998 162000.qcom,debugcc: Registered debug mux
[ 2.467613] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.467851] [5: swapper/0: 1] sec-battery soc:battery: sec_battery_probe: SEC Battery Driver Loading
[ 2.468100] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(0) INPUT(1800) CHARGING(2100)
[ 2.468184] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(1) INPUT(500) CHARGING(500)
[ 2.468265] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(2) INPUT(1000) CHARGING(1000)
[ 2.468348] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(3) INPUT(1800) CHARGING(2100)
[ 2.468431] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(4) INPUT(500) CHARGING(500)
[ 2.468512] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(5) INPUT(1500) CHARGING(1500)
[ 2.468594] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(6) INPUT(1650) CHARGING(2150)
[ 2.468677] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(7) INPUT(1650) CHARGING(2150)
[ 2.468760] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(8) INPUT(1650) CHARGING(2150)
[ 2.468842] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(9) INPUT(1650) CHARGING(2150)
[ 2.468925] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(10) INPUT(900) CHARGING(1200)
[ 2.469008] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(11) INPUT(650) CHARGING(1200)
[ 2.469090] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(12) INPUT(900) CHARGING(1200)
[ 2.469173] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(13) INPUT(700) CHARGING(1200)
[ 2.469256] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(14) INPUT(900) CHARGING(1200)
[ 2.469339] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(15) INPUT(900) CHARGING(1200)
[ 2.469421] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(16) INPUT(650) CHARGING(1200)
[ 2.469504] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(17) INPUT(1650) CHARGING(2150)
[ 2.469587] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(18) INPUT(1650) CHARGING(2150)
[ 2.469670] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(19) INPUT(500) CHARGING(500)
[ 2.469752] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(20) INPUT(1800) CHARGING(2100)
[ 2.469835] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(21) INPUT(500) CHARGING(500)
[ 2.469916] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(22) INPUT(500) CHARGING(500)
[ 2.469998] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(23) INPUT(500) CHARGING(500)
[ 2.470079] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(24) INPUT(1000) CHARGING(450)
[ 2.470161] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(25) INPUT(1000) CHARGING(1000)
[ 2.470245] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(26) INPUT(2000) CHARGING(1800)
[ 2.470328] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(27) INPUT(900) CHARGING(1200)
[ 2.470410] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(28) INPUT(650) CHARGING(1200)
[ 2.470493] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(29) INPUT(500) CHARGING(1200)
[ 2.470575] [5: swapper/0: 1] sec_bat_parse_dt : CABLE_NUM(30) INPUT(500) CHARGING(500)
[ 2.470656] [5: swapper/0: 1] sec_bat_parse_dt : TOPOFF_1ST(300), TOPOFF_2ND(150)
[ 2.473772] [5: swapper/0: 1] sec_bat_parse_dt : coil_thermal_source exists
[ 2.473886] [5: swapper/0: 1] sec_bat_parse_dt : slave_thermal_source is Empty
[ 2.474002] [5: swapper/0: 1] sec_bat_parse_dt : slave_chg_temp_check is Empty
[ 2.474115] [5: swapper/0: 1] sec_bat_parse_dt : chg_12v_high_temp is Empty
[ 2.474408] [5: swapper/0: 1] sec_bat_parse_dt: wpc_high_temp_size(1)
[ 2.474479] [5: swapper/0: 1] sec_bat_parse_dt: index(0) - wpc_high_temp(410), wpc_high_temp_recovery(400)
[ 2.474642] [5: swapper/0: 1] sec_bat_parse_dt: STORE LCD OFF hightemp(410), highrecovery(400)
[ 2.474730] [5: swapper/0: 1] sec_bat_parse_dt: STORE LCD ON hightemp(380), highrecovery(300)
[ 2.474873] [5: swapper/0: 1] sec_bat_parse_dt : inbat_voltage is Empty
[ 2.474999] [5: swapper/0: 1] sec_bat_parse_dt : store_mode_afc_input_current is Empty
[ 2.475148] [5: swapper/0: 1] sec_bat_parse_dt : store_mode_hv_wireless_input_current is Empty
[ 2.475250] [4: kworker/u16:3: 274] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.475490] [5: swapper/0: 1] sec_bat_parse_dt : HIGHLIMIT_THRESHOLD_NOLMAL(800), HIGHLIMIT_RECOVERY_NORMAL(750)
[ 2.475490] [5: swapper/0: 1] HIGH_THRESHOLD_NORMAL(500), HIGH_RECOVERY_NORMAL(450) LOW_THRESHOLD_NORMAL(0), LOW_RECOVERY_NORMAL(50)
[ 2.475490] [5: swapper/0: 1] HIGHLIMIT_THRESHOLD_LPM(800), HIGHLIMIT_RECOVERY_LPM(750)
[ 2.475490] [5: swapper/0: 1] HIGH_THRESHOLD_LPM(500), HIGH_RECOVERY_LPM(450) LOW_THRESHOLD_LPM(0), LOW_RECOVERY_LPM(50)
[ 2.475979] [5: swapper/0: 1] sec_bat_parse_dt : swelling drop voltage(set : 41500, condition : 4150)
[ 2.476080] [5: swapper/0: 1] sec_bat_parse_dt : SWELLING_HIGH_TEMP(410) SWELLING_HIGH_TEMP_RECOVERY(360)
[ 2.476080] [5: swapper/0: 1] SWELLING_LOW_TEMP_1st(150) SWELLING_LOW_TEMP_RECOVERY_1st(200) SWELLING_LOW_TEMP_2nd(50) SWELLING_LOW_TEMP_RECOVERY_2nd(100) SWELLING_LOW_CURRENT(700, 150), SWELLING_HIGH_CURRENT(1050, 150)
[ 2.476357] [5: swapper/0: 1] sec_bat_parse_dt: ttf_hv_12v_charge_current is Empty, Defualt value 2150
[ 2.476463] [5: swapper/0: 1] sec_bat_parse_dt: ttf_wireless_charge_current is Empty, Defualt value 0
[ 2.476621] [5: swapper/0: 1] sec_bat_parse_dt num_age_step : 5
[ 2.476687] [5: swapper/0: 1] [0/4]cycle:0, float:43500, full_v:4250, recharge_v:4300, soc:93
[ 2.476775] [5: swapper/0: 1] [1/4]cycle:200, float:43300, full_v:4225, recharge_v:4280, soc:92
[ 2.476863] [5: swapper/0: 1] [2/4]cycle:250, float:43100, full_v:4212, recharge_v:4260, soc:91
[ 2.476951] [5: swapper/0: 1] [3/4]cycle:300, float:42900, full_v:4187, recharge_v:4240, soc:90
[ 2.477040] [5: swapper/0: 1] [4/4]cycle:1000, float:42400, full_v:4137, recharge_v:4190, soc:89
[ 2.477189] [5: swapper/0: 1] sec_bat_parse_dt: vendor : BATTERY, technology : 2, cable_check_type : 4
[ 2.477189] [5: swapper/0: 1] cable_source_type : 1, event_waiting_time : 0
[ 2.477189] [5: swapper/0: 1] polling_type : 1, initial_count : 0, check_count : 0
[ 2.477189] [5: swapper/0: 1] check_adc_max : 1440, check_adc_min : 0
[ 2.477189] [5: swapper/0: 1] ovp_uvlo_check_type : 3, thermal_source : 2
[ 2.477189] [5: swapper/0: 1] temp_check_type : 2, temp_check_count : 1
[ 2.477645] [5: swapper/0: 1] sec_bat_set_current_event: current event before(0x0), after(0x40)
[ 2.477735] [5: swapper/0: 1] sales_code_is: ATT
[ 2.479538] [5: swapper/0: 1] sm5720_get_full_chg_mq: high = 0x1, low = 0x90, raw = 0x190, mq = 3125
[ 2.479632] [5: swapper/0: 1] sec_battery_cisd_init: cisd.err_cap_high_thr:4500, cisd.err_cap_low_thr:4000, cisd.overflow_cap_thr:3850
[ 2.481031] [5: swapper/0: 1] sm5720-charger sm5720-charger: psy_chg_get_charger_status: INT_STATUS2=0x18
[ 2.483388] [5: swapper/0: 1] sm5720_voffset_cancel: <0 0 100 10> volt_cal = 0x8000, volt_slope = 0x7f00, mohm_volt_cal = 0x0
[ 2.488273] [4: swapper/0: 1] sm5720_adabt_full_offset: curr=449, curr_off=8c, aux_stat=e1,
[ 2.494706] [4: swapper/0: 1] sm5720_vbatocv_check: mode change to mix RS auto mode
[ 2.498890] [4: swapper/0: 1] sm5720_cal_carc: <0 6 1 11 -1 1 6 1 9 1>, temp_fg = 226 ,p_curr_cal = 0x70, n_curr_cal = 0x8f, batt_temp = 300
[ 2.500954] [4: swapper/0: 1] sm5720_cal_carc: <0 2 1 2 1 1 2 3 2 3>, p_curr_cal = 0x70, n_curr_cal = 0x8f, mix_factor=0x146 ,curr_cal = 0x8f70
[ 2.503487] [4: swapper/0: 1] sm5720_fg_check_reg_init_need: SM5720_REG_FG_OP_STATUS : 0x8010 , return FALSE NO init need
[ 2.510058] [4: swapper/0: 1] sm5720_fg_test_read: 0xA0=0x1400, 0xAC=0x1400, 0xAD=0x20c0, 0xAE=0x2266, 0xAF=0x2400, 0x28=0x05ec, 0x2F=0x0108, 0x01=0xc401, SM5720_ID=0x000e
[ 2.518234] [4: swapper/0: 1] sm5720_fg_test_read: 0xB0=0x0000, 0xBC=0x11e5, 0xBD=0x1319, 0xBE=0x178c, 0xBF=0x178c, 0x85=0x02f3, 0x86=0x025d, 0x87=0x16e7, 0x1F=0x0050, 0x94=0x00e1
[ 2.519194] [4: swapper/0: 1] sm5720_update_all_value: chg_h=0, chg_f=0, chg_s=1, is_chg=0, ta_exist=0, v=4340, v_avg=4346, i=535, i_avg=540, ocv=4269, fg_t=226, b_t=300, cycle=0, soc=972, state=0xe, capacity_max=1000
[ 2.520174] [4: swapper/0: 1] sm5720_meas_mq_dump: AUX_2 : <0x8000>
[ 2.565053] [4: kworker/u16:7: 295] mfc_get_firmware_version: called by (mfc_wpc_fw_booting_work)
[ 2.565584] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x10 Value: 0x16
[ 2.566414] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x10 Value: 0x16
[ 2.566414] [6: kworker/6:1: 357]
[ 2.566921] [4: kworker/u16:7: 295] mfc_get_firmware_version rx major firmware version 0x1
[ 2.567091] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x5 Value: 0x0
[ 2.567910] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x5 Value: 0x0
[ 2.567910] [6: kworker/6:1: 357]
[ 2.568602] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x11 Value: 0x20
[ 2.568748] [4: kworker/u16:7: 295] mfc_get_firmware_version rx minor firmware version 0x58
[ 2.568849] [4: kworker/u16:7: 295] mfc_wpc_fw_booting_work: fw version (0x58)
[ 2.568941] [4: kworker/u16:7: 295] sm5720-charger sm5720-charger: CHG:POWER_SUPPLY_PROP_CHARGE_UNO_CONTROL - OFF
[ 2.569421] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x11 Value: 0x20
[ 2.569421] [6: kworker/6:1: 357]
[ 2.569767] [4: kworker/u16:7: 295] sm5720-charger: sm5720_charger_oper_push_event: event_type=6, enable=1
[ 2.569883] [4: kworker/u16:7: 295] sm5720-charger: sm5720_charger_oper_push_event: event_type=2, enable=0
[ 2.570102] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x20 Value: 0x0
[ 2.570927] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x20 Value: 0x0
[ 2.570927] [6: kworker/6:1: 357]
[ 2.571243] [4: kworker/u16:7: 295] sm5720-charger: sm5720_charger_oper_change_state: New table[1] info (STATUS: 0x40, MODE: 5, BST_OUT: 0x1, OTG_CURRENT: 0x0 TX_CURRENT: 0x4
[ 2.571425] [4: kworker/u16:7: 295] sec_bat_get_property cable type = 1 sleep_mode = 0
[ 2.571520] [4: kworker/u16:7: 295] mfc_uno_on: DISABLE
[ 2.571590] [4: kworker/u16:7: 295] mfc_wpc_int_req_work
[ 2.571642] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x23 Value: 0x0
[ 2.572398] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x23 Value: 0x0
[ 2.572398] [6: kworker/6:1: 357]
[ 2.573028] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x24 Value: 0x44
[ 2.573786] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x24 Value: 0x44
[ 2.573786] [6: kworker/6:1: 357]
[ 2.574417] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x26 Value: 0x0
[ 2.575204] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x26 Value: 0x0
[ 2.575204] [6: kworker/6:1: 357]
[ 2.575890] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x27 Value: 0x44
[ 2.576598] [4: swapper/0: 1] sm5720_meas_mq_dump: SM5720_FG_REG_MQ : <0x18e> OK count = 0
[ 2.576704] [4: swapper/0: 1] sec_bat_get_property cable type = 1 sleep_mode = 0
[ 2.576778] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x27 Value: 0x44
[ 2.576778] [6: kworker/6:1: 357]
[ 2.577443] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x28 Value: 0x2a
[ 2.578259] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x28 Value: 0x2a
[ 2.578259] [6: kworker/6:1: 357]
[ 2.578391] [4: swapper/0: 1] sm5720_fg_get_scaled_capacity : current_standard(1000)
[ 2.578472] [4: swapper/0: 1] sm5720_fg_get_scaled_capacity : CABLE TYPE(1) INPUT CURRENT(1500) CV MODE(1)capacity_max (1000) scaled capacity(97.2), raw_soc(97.2)
[ 2.578628] [4: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x2)
[ 2.578733] [0: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_cable_work: Start
[ 2.578833] [0: kworker/u16:3: 274] sec_bat_set_current_event: current event before(0x40), after(0x44)
[ 2.578947] [0: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_cable_work: End
[ 2.579044] [4: swapper/0: 1] usb: [M] manager_notifier_register: listener=23 register
[ 2.579139] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x29 Value: 0x2a
[ 2.579232] [4: swapper/0: 1] usb: [M] manager_notifier_register: PD is attached already
[ 2.579336] [4: swapper/0: 1] usb: [M] manager_notifier_register BATTERY: cable_type=0 (MUIC)
[ 2.579448] [4: swapper/0: 1] sec-battery soc:battery: usb_typec_handle_notification: action (4) dump(0x6, 0x2, 0x04, 0x0001, 0x0000, 0x0000)
[ 2.579602] [4: swapper/0: 1] sec-battery soc:battery: usb_typec_handle_notification: available pdo : 1, current pdo : 1
[ 2.579735] [4: swapper/0: 1] usb_typec_handle_notification: power_list[1], voltage : 5000, current : 1500, power : 7500000
[ 2.579867] [4: swapper/0: 1] make_pd_list: total pd_list_index: 1
[ 2.579937] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x29 Value: 0x2a
[ 2.579937] [6: kworker/6:1: 357]
[ 2.580066] [4: swapper/0: 1] make_pd_list: Made pd_list[0], voltage : 5000, current : 1500, index : 1
[ 2.580183] [4: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1)
[ 2.580288] [4: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x4)
[ 2.580404] [4: swapper/0: 1] sec-battery soc:battery: usb_typec_handle_notification: CMD[ATTACH], CABLE_TYPE[19]
[ 2.580531] [0: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_cable_work: Start
[ 2.580614] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x2a Value: 0x2a
[ 2.580702] [0: kworker/u16:3: 274] sec_bat_set_current_event: current event before(0x44), after(0x44)
[ 2.580813] [0: kworker/u16:3: 274] sec_bat_get_input_current_in_power_list:max_input_current : 1500mA
[ 2.580926] [0: kworker/u16:3: 274] sec_bat_get_charging_current_in_power_list:pd_charge_power : 7500000mW, max_charging_current : 1724mA
[ 2.581072] [0: kworker/u16:3: 274] sm5720-charger sm5720-charger: CHG:POWER_SUPPLY_PROP_VOLTAGE_MAX (val=43500)
[ 2.581199] [4: swapper/0: 1] vbus_notifier_register: listener=1 register
[ 2.581303] [4: swapper/0: 1] vbus_handle_notification: action=0, vbus_status=0
[ 2.581414] [4: swapper/0: 1] sm5720_charger_enable_aicl_irq
[ 2.581487] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x2a Value: 0x2a
[ 2.581487] [6: kworker/6:1: 357]
[ 2.582230] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x2b Value: 0x26
[ 2.582566] [0: kworker/u16:3: 274] sec_bat_cable_work: float voltage = 43500
[ 2.582684] [0: kworker/u16:3: 274] sec_bat_set_current_event: current event before(0x44), after(0x44)
[ 2.582829] [0: kworker/u16:3: 274] sm5720-charger sm5720-charger: CHG:POWER_SUPPLY_PROP_CHARGING_ENABLED (val=0)
[ 2.582984] [0: kworker/u16:3: 274] sm5720-charger sm5720-charger: charger_mode changed [0] -> [0]
[ 2.583108] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x2b Value: 0x26
[ 2.583108] [6: kworker/6:1: 357]
[ 2.583270] [0: kworker/u16:3: 274] sm5720_CHG_set_ENWATCHDOG: WDT en = 1
[ 2.583807] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x30 Value: 0x9
[ 2.584642] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x30 Value: 0x9
[ 2.584642] [6: kworker/6:1: 357]
[ 2.585464] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x31 Value: 0x9
[ 2.586306] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x31 Value: 0x9
[ 2.586306] [6: kworker/6:1: 357]
[ 2.586991] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x32 Value: 0x20
[ 2.587823] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x32 Value: 0x20
[ 2.587823] [6: kworker/6:1: 357]
[ 2.587971] [4: swapper/0: 1] sec_bat_get_property cable type = 19 sleep_mode = 0
[ 2.588066] [4: swapper/0: 1] sec-battery soc:battery: sec_battery_probe: SEC Battery Driver Loaded
[ 2.588267] [5: kworker/5:2: 417] sec_bat_get_property cable type = 19 sleep_mode = 0
[ 2.588388] [4: swapper/0: 1] initcall sec_battery_init+0x0/0x30 returned 0 after 117939 usecs
[ 2.588525] [4: swapper/0: 1] FIPS 140-2 (SKC v1.8) : POST
[ 2.588704] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x33 Value: 0x20
[ 2.589459] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x33 Value: 0x20
[ 2.589459] [6: kworker/6:1: 357]
[ 2.590086] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x34 Value: 0xb
[ 2.590843] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x34 Value: 0xb
[ 2.590843] [6: kworker/6:1: 357]
[ 2.591470] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x35 Value: 0x14
[ 2.592225] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x35 Value: 0x14
[ 2.592225] [6: kworker/6:1: 357]
[ 2.592853] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x36 Value: 0x8
[ 2.593608] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x36 Value: 0x8
[ 2.593608] [6: kworker/6:1: 357]
[ 2.594233] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x37 Value: 0x8
[ 2.594986] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x37 Value: 0x8
[ 2.594986] [6: kworker/6:1: 357]
[ 2.595966] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x40 Value: 0x0
[ 2.596233] [4: swapper/0: 1] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
[ 2.596831] [4: swapper/0: 1] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
[ 2.596969] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x40 Value: 0x0
[ 2.596969] [6: kworker/6:1: 357]
[ 2.597858] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x41 Value: 0x0
[ 2.597972] [2: kworker/u16:3: 274] sm5720-charger: sm5720_charger_oper_push_event: event_type=0, enable=0
[ 2.598614] [0: kworker/u16:4: 292] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: platform (null) not registered
[ 2.598757] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x41 Value: 0x0
[ 2.598757] [6: kworker/6:1: 357]
[ 2.599510] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x42 Value: 0x0
[ 2.600408] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x42 Value: 0x0
[ 2.600408] [6: kworker/6:1: 357]
[ 2.601176] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x43 Value: 0x0
[ 2.602086] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x43 Value: 0x0
[ 2.602086] [6: kworker/6:1: 357]
[ 2.602268] [2: kworker/u16:3: 274] sm5720-charger:
[ 2.602335] [2: kworker/u16:3: 274] 0x9:0x21 0xa:0x18
[ 2.602408] [2: kworker/u16:3: 274] 0xb:0x0 0xc:0x10
[ 2.602480] [2: kworker/u16:3: 274] 0xd:0x60 0xe:0x5
[ 2.602552] [2: kworker/u16:3: 274] 0xf:0x38 0x10:0xc
[ 2.602624] [2: kworker/u16:3: 274] 0x11:0x1c 0x12:0xe8
[ 2.602699] [2: kworker/u16:3: 274] 0x13:0x6 <6>[ 2.602759] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x44 Value: 0x0
[ 2.602849] [2: kworker/u16:3: 274] 0x14:0x64
[ 2.602907] [2: kworker/u16:3: 274] 0x15:0xa 0x16:0x84
[ 2.602981] [2: kworker/u16:3: 274] 0x17:0x10 0x18:0x11
[ 2.603056] [2: kworker/u16:3: 274] 0x19:0x7 0x1a:0x31
[ 2.603132] [2: kworker/u16:3: 274] 0x1b:0x4 0x1c:0x0
[ 2.603611] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x44 Value: 0x0
[ 2.603611] [6: kworker/6:1: 357]
[ 2.603981] [2: kworker/u16:3: 274] sm5720-charger sm5720-charger: [start] prev_cable_type(0), cable_type(19), op_mode(5), op_status(0x40)
[ 2.604130] [2: kworker/u16:3: 274] sm5720-charger: sm5720_charger_oper_push_event: event_type=5, enable=0
[ 2.604248] [2: kworker/u16:3: 274] sm5720-charger: sm5720_charger_oper_push_event: event_type=6, enable=1
[ 2.604348] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x45 Value: 0x5
[ 2.604446] [2: kworker/u16:3: 274] sm5720-charger sm5720-charger: [end] is_charging=1, fc = 0, il = 1500, cable = 19,op_mode(5), op_status(0x40)
[ 2.605208] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x45 Value: 0x5
[ 2.605208] [6: kworker/6:1: 357]
[ 2.605431] [5: kworker/u16:3: 274] sec_bat_get_charging_current_by_siop: incurr(1500), chgcurr(1724)
[ 2.605545] [5: kworker/u16:3: 274] sec_bat_set_charging_current: update charge_power(7500)
[ 2.605648] [5: kworker/u16:3: 274] sm5720-charger sm5720-charger: CHG:POWER_SUPPLY_PROP_CURRENT_MAX (val=1500)
[ 2.605890] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x46 Value: 0x0
[ 2.606719] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x46 Value: 0x0
[ 2.606719] [6: kworker/6:1: 357]
[ 2.606995] [5: kworker/u16:3: 274] sm5720-charger sm5720-charger: CHG:POWER_SUPPLY_PROP_CURRENT_NOW (val=1724)
[ 2.607411] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x47 Value: 0x0
[ 2.608238] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x47 Value: 0x0
[ 2.608238] [6: kworker/6:1: 357]
[ 2.608382] [5: kworker/u16:3: 274] sm5720-charger sm5720-charger: CHG:POWER_SUPPLY_PROP_CURRENT_FULL (val=300)
[ 2.609103] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x48 Value: 0x0
[ 2.609881] [5: kworker/u16:3: 274] sm5720_muic_charger_init
[ 2.609953] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
[ 2.610091] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x48 Value: 0x0
[ 2.610091] [6: kworker/6:1: 357]
[ 2.610217] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_cable_work: Polling time is reset to 30 sec.
[ 2.610351] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_cable_work: End
[ 2.610526] [4: swapper/0: 1] FIPS: self-tests for gcm(aes-generic) (gcm(aes)) passed
[ 2.610774] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x49 Value: 0x0
[ 2.611020] [4: swapper/0: 1] FIPS: self-tests for ecb(aes-ce) (ecb(aes)) passed
[ 2.611227] [4: swapper/0: 1] FIPS: self-tests for cbc(aes-ce) (cbc(aes)) passed
[ 2.611720] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x49 Value: 0x0
[ 2.611720] [6: kworker/6:1: 357]
[ 2.612313] [4: swapper/0: 1] FIPS: self-tests for gcm(aes-ce) (gcm(aes)) passed
[ 2.612477] [4: swapper/0: 1] FIPS: self-tests for sha1-generic (sha1) passed
[ 2.612568] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x4a Value: 0x40
[ 2.613018] [4: swapper/0: 1] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
[ 2.613157] [5: kworker/u16:3: 274] sm5720_voffset_cancel: <0 0 100 10> volt_cal = 0x8000, volt_slope = 0x8000, mohm_volt_cal = 0x0
[ 2.613291] [4: swapper/0: 1] FIPS: self-tests for sha1-ce (sha1) passed
[ 2.613466] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x4a Value: 0x40
[ 2.613466] [6: kworker/6:1: 357]
[ 2.613688] [4: swapper/0: 1] FIPS: self-tests for hmac(sha1-ce) (hmac(sha1)) passed
[ 2.613889] [4: swapper/0: 1] FIPS: self-tests for sha224-generic (sha224) passed
[ 2.614075] [4: swapper/0: 1] FIPS: self-tests for sha256-generic (sha256) passed
[ 2.614225] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x4b Value: 0x21
[ 2.614664] [4: swapper/0: 1] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
[ 2.615227] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x4b Value: 0x21
[ 2.615227] [6: kworker/6:1: 357]
[ 2.615756] [4: swapper/0: 1] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
[ 2.615908] [4: swapper/0: 1] FIPS: self-tests for sha224-ce (sha224) passed
[ 2.616007] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x4c Value: 0x0
[ 2.616135] [4: swapper/0: 1] FIPS: self-tests for sha256-ce (sha256) passed
[ 2.616546] [4: swapper/0: 1] FIPS: self-tests for hmac(sha224-ce) (hmac(sha224)) passed
[ 2.616726] [4: swapper/0: 1] FIPS: self-tests for hmac(sha256-ce) (hmac(sha256)) passed
[ 2.616884] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x4c Value: 0x0
[ 2.616884] [6: kworker/6:1: 357]
[ 2.617029] [4: swapper/0: 1] FIPS: self-tests for sha384-generic (sha384) passed
[ 2.617195] [4: swapper/0: 1] FIPS: self-tests for sha512-generic (sha512) passed
[ 2.617680] [4: swapper/0: 1] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
[ 2.617790] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x4d Value: 0x4
[ 2.618268] [4: swapper/0: 1] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
[ 2.618400] [4: swapper/0: 1] FIPS: self-tests for drbg_nopr_hmac_sha1 (stdrng) passed
[ 2.618527] [4: swapper/0: 1] FIPS: self-tests for drbg_nopr_hmac_sha384 (stdrng) passed
[ 2.618653] [4: swapper/0: 1] FIPS: self-tests for drbg_nopr_hmac_sha512 (stdrng) passed
[ 2.618752] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x4d Value: 0x4
[ 2.618752] [6: kworker/6:1: 357]
[ 2.619003] [4: swapper/0: 1] FIPS: self-tests for drbg_nopr_hmac_sha256 (stdrng) passed
[ 2.619137] [4: swapper/0: 1] FIPS: self-tests for drbg_pr_hmac_sha1 (stdrng) passed
[ 2.619259] [4: swapper/0: 1] FIPS: self-tests for drbg_pr_hmac_sha384 (stdrng) passed
[ 2.619385] [4: swapper/0: 1] FIPS: self-tests for drbg_pr_hmac_sha512 (stdrng) passed
[ 2.619491] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x4e Value: 0x80
[ 2.619699] [4: swapper/0: 1] FIPS: self-tests for drbg_pr_hmac_sha256 (stdrng) passed
[ 2.619825] [4: swapper/0: 1] FIPS : POST - Algorithm Tests Passed
[ 2.620323] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x4e Value: 0x80
[ 2.620323] [6: kworker/6:1: 357]
[ 2.621005] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x4f Value: 0xc
[ 2.621825] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x4f Value: 0xc
[ 2.621825] [6: kworker/6:1: 357]
[ 2.622508] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x50 Value: 0x0
[ 2.623336] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x50 Value: 0x0
[ 2.623336] [6: kworker/6:1: 357]
[ 2.624030] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x51 Value: 0x0
[ 2.624856] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x51 Value: 0x0
[ 2.624856] [6: kworker/6:1: 357]
[ 2.625575] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x52 Value: 0x0
[ 2.626392] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x52 Value: 0x0
[ 2.626392] [6: kworker/6:1: 357]
[ 2.627085] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x53 Value: 0x0
[ 2.627905] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x53 Value: 0x0
[ 2.627905] [6: kworker/6:1: 357]
[ 2.628576] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x54 Value: 0x0
[ 2.629331] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x54 Value: 0x0
[ 2.629331] [6: kworker/6:1: 357]
[ 2.629963] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x6 Value: 0x0
[ 2.630719] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x6 Value: 0x0
[ 2.630719] [6: kworker/6:1: 357]
[ 2.631347] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x7 Value: 0x80
[ 2.632103] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x7 Value: 0x80
[ 2.632103] [6: kworker/6:1: 357]
[ 2.632730] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Write Reg: 0x2d Value: 0x8
[ 2.633485] [6: kworker/6:1: 357] [SX9320]: sx9320_initialize_register - Read Reg: 0x2d Value: 0x8
[ 2.633485] [6: kworker/6:1: 357]
[ 2.694793] [4: swapper/0: 1] FIPS : POST - Integrity Check Passed
[ 2.694861] [4: swapper/0: 1] FIPS : POST - CRYPTO API started in FIPS approved mode
[ 2.694948] [4: swapper/0: 1] initcall tcrypt_mod_init+0x0/0x14c returned 0 after 103935 usecs
[ 2.695063] [4: swapper/0: 1] gfx_mem_acc_corner: disabling
[ 2.695154] [4: swapper/0: 1] apc0_pwrcl_corner: disabling
[ 2.695215] [4: swapper/0: 1] apc1_perfcl_corner: disabling
[ 2.705147] [4: swapper/0: 1] s2mpb02-buck2: disabling
[ 2.705316] [4: swapper/0: 1] s2m_disable_regmap: s2mpb02-buck2
[ 2.706264] [4: swapper/0: 1] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[ 2.706566] [4: swapper/0: 1] clock_late_init: Removing enables held for handed-off clocks
[ 2.711417] [4: swapper/0: 1] ALSA device list:
[ 2.711518] [4: swapper/0: 1] No soundcards found.
[ 2.711668] [4: swapper/0: 1] Warning: unable to open an initial console.
[ 2.712376] [4: swapper/0: 1] This architecture does not have kernel memory protection.
[ 2.713458] [4: init: 1] !@Boot: start init process
[ 2.713629] [4: init: 1] init: init first stage started!
[ 2.713938] [4: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:kernel RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 2.718444] [4: init: 1] SELinux: 8192 avtab hash slots, 17661 rules.
[ 2.722711] [4: init: 1] SELinux: 8192 avtab hash slots, 17661 rules.
[ 2.722950] [4: init: 1] SELinux: 1 users, 2 roles, 2124 types, 0 bools, 1 sens, 1024 cats
[ 2.723111] [4: init: 1] SELinux: 63 classes, 17661 rules
[ 2.725646] [4: init: 1] SELinux: Completing initialization.
[ 2.725769] [4: init: 1] SELinux: Setting up existing superblocks.
[ 2.739392] [4: init: 1] init: SELinux: Loaded policy from /sepolicy
[ 2.739686] [4: init: 1] init: (Initializing SELinux enforcing took 0.03s.)
[ 2.740034] [4: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:kernel:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 2.742268] [4: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts.bin.
[ 2.744091] [4: init: 1] init: init second stage started!
[ 2.749071] [4: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 2.751313] [4: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts.bin.
[ 2.751575] [4: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 2.752466] [4: init: 1] init: Running restorecon...
[ 3.028833] [5: kworker/u16:3: 274] [FG_ALL] 00:0000,c401,0000,000e,0000,6138,2228,22ca,0449,16b0,0000,0000,0319,3c8a,0100,ffff,01:8010,ffff,0005,000f,0000,7103,ffff,ffff,ffff,ffff,0a0a,0103,0004,ffff,ffff,0050,02:04e1,03e6,01d7,0001,80dd,0146,3800,0078,0550,00a4,061c,0048,ffff,000e,1735,0108,03:172c,1730,1733,1738,173b,173f,1742,1746,0a0d,0a0e,0a0f,0a0f,3bfe,0e6f,5aab,1dad,04:03b4,03b1,03b3,03b2,03b4,03b2,03b3,03b2,403e,4041,403d,4041,7491,2cfe,047b,6f9d,05:8000,0000,8f70,0000,8f70,0000,8f70,18df,0000,ffff,0000,0001,0090,ffff,ffff,ffff,06:d5ba,967c,0000,8080,008c,8080,008c,8080,ffff,ffff,ffff,ffff,ffff,ffff,ffff,ffff,08:000e,8003,8002,018e,80a2,034f,80f5,16e7,040f,ffff,ffff,ffff,ffff,07c2,ffff,ffff,09:0000,a000,0000,8000,00e1,ffff,ffff,0000,0000,0000,0000,ffff,ffff,ffff,ffff,ffff,0a:6f9d,1400,1b47,1c7c,1d71,1d88,1ddd,1e2a,1e68,1ed3,1f3d,1fb0,1fdd,2076,20c0,2266,0b:2400,0000,001e,007e,0139,024e,0419,067f,0983,0c81,0db4,0f84,10b2,11e5,1319,178c,0c:0000,178c,0000,0000,
[ 3.033359] [5: kworker/u16:3: 274] sm5720_adabt_full_offset: curr=431, curr_off=8c, aux_stat=e1,
[ 3.042567] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_get_value_by_adc:[2] Temp(259), Temp-ADC(8026)
[ 3.042668] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_get_value_by_adc:[3] Temp(-200), Temp-ADC(33000)
[ 3.045774] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_get_value_by_adc:[12] Temp(258), Temp-ADC(8047)
[ 3.048834] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_get_value_by_adc:[6] Temp(282), Temp-ADC(7584)
[ 3.051894] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_get_value_by_adc:[10] Temp(259), Temp-ADC(8026)
[ 3.053053] [5: kworker/u16:3: 274] sm5720-charger sm5720-charger: psy_chg_get_charger_status: INT_STATUS2=0x18
[ 3.056758] [5: kworker/u16:3: 274] sm5720_voffset_cancel: <0 0 100 10> volt_cal = 0x8000, volt_slope = 0x8000, mohm_volt_cal = 0x0
[ 3.064213] [5: kworker/u16:3: 274] sm5720_adabt_full_offset: curr=431, curr_off=8c, aux_stat=e1,
[ 3.074292] [5: kworker/u16:3: 274] sm5720_vbatocv_check: mode change to mix RS auto mode
[ 3.075065] [6: kworker/6:1: 357] [SX9320]: sx9320_set_mode - change the mode : 1
[ 3.079344] [4: init: 1] init: SELinux: Could not set context for /sys/kernel/config: Operation not supported on transport endpoint
[ 3.081277] [5: kworker/u16:3: 274] sm5720_cal_carc: <0 6 1 11 -1 1 6 1 9 1>, temp_fg = 226 ,p_curr_cal = 0x70, n_curr_cal = 0x8f, batt_temp = 259
[ 3.084478] [5: kworker/u16:3: 274] sm5720_cal_carc: <0 2 1 2 1 1 2 3 2 3>, p_curr_cal = 0x70, n_curr_cal = 0x8f, mix_factor=0x147 ,curr_cal = 0x8f70
[ 3.088394] [5: kworker/u16:3: 274] sm5720_fg_check_reg_init_need: SM5720_REG_FG_OP_STATUS : 0x8010 , return FALSE NO init need
[ 3.092030] [4: init: 1] init: waitpid failed: No child processes
[ 3.092411] [4: init: 1] init: (Loading properties from /default.prop took 0.00s.)
[ 3.093052] [4: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 3.094094] [4: init: 1] init: /init.rc: 794: invalid keyword 'cpyContent_rmdir'
[ 3.094908] [4: init: 1] init: /init.rc: 1704: restorecon_data_force requires 0 arguments
[ 3.095319] [4: init: 1] init: (Parsing /init.environ.rc took 0.00s.)
[ 3.095547] [4: init: 1] init: (Parsing /init.usb.rc took 0.00s.)
[ 3.098563] [5: kworker/u16:3: 274] sm5720_fg_test_read: 0xA0=0x1792, 0xAC=0x1400, 0xAD=0x2076, 0xAE=0x20c0, 0xAF=0x2266, 0x28=0x0550, 0x2F=0x0108, 0x01=0xc401, SM5720_ID=0x000e
[ 3.099013] [4: init: 1] init: (Parsing init.qcom.usb.rc took 0.00s.)
[ 3.100008] [4: init: 1] init: (Parsing init.msm.usb.configfs.rc took 0.00s.)
[ 3.100509] [4: init: 1] init: (Parsing init.target.rc took 0.00s.)
[ 3.100720] [4: init: 1] init: (Parsing init.qcom.factory.rc took 0.00s.)
[ 3.100975] [4: init: 1] init: ignored duplicate definition of service 'hostapd'init: (Parsing init.wifi.rc took 0.00s.)
[ 3.101190] [4: init: 1] init: (Parsing /init.qcom.rc took 0.01s.)
[ 3.101742] [4: init: 1] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[ 3.101969] [4: init: 1] init: (Parsing /init.zygote64_32.rc took 0.00s.)
[ 3.102141] [4: init: 1] init: /init.carrier.rc: 19: invalid keyword 'mkdir'
[ 3.102305] [4: init: 1] init: /init.carrier.rc: 40: invalid keyword 'chown'
[ 3.102457] [4: init: 1] init: /init.carrier.rc: 41: invalid keyword 'chmod'
[ 3.102733] [4: init: 1] init: (Parsing /init.carrier.rc took 0.00s.)
[ 3.102893] [4: init: 1] init: could not import file '/init.rilcommon.rc' from '/init.rc': No such file or directory
[ 3.103207] [4: init: 1] init: (Parsing /init.container.rc took 0.00s.)
[ 3.103357] [4: init: 1] init: could not import file '/init.fac.rc' from '/init.rc': No such file or directory
[ 3.103555] [4: init: 1] init: (Parsing /init.rc took 0.01s.)
[ 3.104000] [4: init: 1] init: Starting service 'ueventd'...
[ 3.105210] [4: init: 1] init: Waiting for /dev/.coldboot_done...
[ 3.107719] [0: ueventd: 456] ueventd: ueventd started!
[ 3.108882] [0: ueventd: 456] ueventd: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:ueventd:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 3.111399] [5: kworker/u16:3: 274] sm5720_fg_test_read: 0xB0=0x172c, 0xBC=0x0000, 0xBD=0x11e5, 0xBE=0x1319, 0xBF=0x178c, 0x85=0x03af, 0x86=0x80f5, 0x87=0x16e7, 0x1F=0x0050, 0x94=0x00e1
[ 3.112184] [0: ueventd: 456] ueventd: SELinux: Loaded file_contexts contexts from /file_contexts.bin.
[ 3.112827] [5: kworker/u16:3: 274] sm5720_update_all_value: chg_h=0, chg_f=0, chg_s=1, is_chg=1, ta_exist=1, v=4348, v_avg=4344, i=538, i_avg=535, ocv=4269, fg_t=226, b_t=259, cycle=0, soc=972, state=0xe, capacity_max=1000
[ 3.114266] [5: kworker/u16:3: 274] sm5720_meas_mq_dump: AUX_2 : <0x8000>
[ 3.115808] [4: ueventd: 456] ueventd: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:ueventd:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 3.118175] [4: ueventd: 456] ueventd: SELinux: Loaded file_contexts contexts from /file_contexts.bin.
[ 3.177543] [5: kworker/u16:3: 274] sm5720_meas_mq_dump: SM5720_FG_REG_MQ : <0x18e> OK count = 0
[ 3.177640] [5: kworker/u16:3: 274] sec_bat_get_property cable type = 19 sleep_mode = 0
[ 3.179880] [5: kworker/u16:3: 274] sm5720_fg_get_scaled_capacity : current_standard(1000)
[ 3.179962] [5: kworker/u16:3: 274] sm5720_fg_get_scaled_capacity : curr(535) topoff(0) capacity_max(1000)
[ 3.180058] [5: kworker/u16:3: 274] sm5720_fg_get_scaled_capacity : CABLE TYPE(19) INPUT CURRENT(1500) CV MODE(1)capacity_max (1000) scaled capacity(97.2), raw_soc(97.2)
[ 3.180206] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(4348mV),Inow(523mA),Imax(1500mA),Ichg(1724mA),SOC(97%),Tbat(259), Tusb(258), Tchg(282),Twpc(259)
[ 3.181656] [5: kworker/u16:3: 274] sm5720_meas_mq_dump: AUX_2 : <0x8000>
[ 3.238083] [5: kworker/u16:3: 274] sm5720_meas_mq_dump: SM5720_FG_REG_MQ : <0x18d> OK count = 0
[ 3.238174] [5: kworker/u16:3: 274] sec_bat_cisd_check: QH_VALUE_NOW(0~65535): 3101, QH_VFSOC_NOW(0.001%): 97200
[ 3.238272] [5: kworker/u16:3: 274] sec_bat_cisd_check: [DEBUG] Prev QH : 0, Current QH : 3101, Prev time : 0, Cur time : 1484301319
[ 3.240528] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_cisd_check: [CISD] iavg: 534, incur: 1500, chgcur: 1700,
[ 3.240528] [5: kworker/u16:3: 274] cc_T: 0, lcd_off_T: 0, passed_T: 0, full_T: 0, chg_end_T: 0, cisd: 0x0
[ 3.240725] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_cisd_check: cisd - clear EFG
[ 3.240813] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_cisd_check: [CISD] iavg: 534, incur: 1500, chgcur: 1700,
[ 3.240813] [5: kworker/u16:3: 274] cc_T: 0, lcd_off_T: 0, passed_T: 0, full_T: 0, chg_end_T: 0, recnt: 0, cisd: 0x0
[ 3.242300] [5: kworker/u16:3: 274] sm5720_meas_mq_dump: AUX_2 : <0x8000>
[ 3.297515] [5: kworker/u16:3: 274] sm5720_meas_mq_dump: SM5720_FG_REG_MQ : <0x18d> OK count = 0
[ 3.297605] [5: kworker/u16:3: 274] cisd - stt:0, cp:3125/0, cpmm:65535/3125/0, dcpt:0, ovc:0, rct:2147483647
[ 3.297703] [5: kworker/u16:3: 274] cisd_debug: 1, 0, 65535, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2147483647, 0, 6
[ 3.297809] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_calc_time_to_full: T: 495 sec, passed time: 0, current: 1500
[ 3.299074] [5: kworker/u16:3: 274] sm5720-charger sm5720-charger: pmic_ver=14, is_charging=1, cable_type=19, status1_reg=0x21
[ 3.299184] [5: kworker/u16:3: 274] sm5720_fg_set_property: charge health from charger = 0x1
[ 3.299267] [5: kworker/u16:3: 274] sm5720_CHG_set_WDTMR_KICK: WDT Kick
[ 3.307075] [5: kworker/u16:3: 274] sm5720-charger:
[ 3.307128] [5: kworker/u16:3: 274] 0x9:0x21 0xa:0x18
[ 3.307187] [5: kworker/u16:3: 274] 0xb:0x0 0xc:0x10
[ 3.307245] [5: kworker/u16:3: 274] 0xd:0x60 0xe:0x5
[ 3.307300] [5: kworker/u16:3: 274] 0xf:0x38 0x10:0xc
[ 3.307363] [5: kworker/u16:3: 274] 0x11:0x1c 0x12:0xe0
[ 3.307424] [5: kworker/u16:3: 274] 0x13:0x6 0x14:0x64
[ 3.307480] [5: kworker/u16:3: 274] 0x15:0x8 0x16:0x84
[ 3.307537] [5: kworker/u16:3: 274] 0x17:0x10 0x18:0x11
[ 3.307595] [5: kworker/u16:3: 274] 0x19:0x7 0x1a:0x31
[ 3.307651] [5: kworker/u16:3: 274] 0x1b:0x4 0x1c:0x0
[ 3.307712] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_temperature: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50)
[ 3.308971] [5: kworker/u16:3: 274] sec_bat_swelling_check: status(1), swell_mode(0:0:0), cv(43500)mV, temp(259)
[ 3.310204] [5: kworker/u16:3: 274] sm5720-charger sm5720-charger: psy_chg_get_charger_status: INT_STATUS2=0x18
[ 3.310301] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_fullcharged_check: Charging Mode : Normal
[ 3.310396] [5: kworker/u16:3: 274] sec_bat_set_current_event: current event before(0x44), after(0x40)
[ 3.310488] [5: kworker/u16:3: 274] sec_bat_calculate_safety_time : EXPIRED_TIME(10800000), IP(7500000), CP(7499400), CURR(1724), STANDARD(2150)
[ 3.310611] [5: kworker/u16:3: 274] sec_bat_calculate_safety_time : CAL_EXPIRED_TIME(13468677) TIME NOW(3) TIME PREV(3)
[ 3.310715] [5: kworker/u16:3: 274] sec_bat_calculate_safety_time : REMAIN_TIME(10799999) CAL_REMAIN_TIME(13468677)
[ 3.310817] [5: kworker/u16:3: 274] sec_bat_check_mix_temp: mix_limit(0), temp(259), chg_temp(282), input_current(1500)
[ 3.310921] [5: kworker/u16:3: 274] sec_bat_check_afc_temp: cable_type(19), chg_limit(0) vbus_by_siop(0)
[ 3.311014] [5: kworker/u16:3: 274] sec_bat_get_charging_current_by_siop: incurr(1500), chgcurr(1724)
[ 3.311107] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_monitor_work: HLT(800) HLR(750) HT(500), HR(450), LT(0), LR(50), lpcharge(0)
[ 3.311234] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(PDIC, PDIC, 0, 0), level(100%), slate_mode(0), store_mode(0), HV(PDIC), sleep_mode(0), Cycle(-1)
[ 3.311458] [5: kworker/5:2: 417] sec_bat_get_property cable type = 19 sleep_mode = 0
[ 3.312703] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_set_polling: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
[ 3.312820] [5: kworker/u16:3: 274] sec-battery soc:battery: sec_bat_set_polling: Polling time 10/30 sec.
[ 3.317733] [4: ueventd: 456] sec_bat_get_property cable type = 19 sleep_mode = 0
[ 3.374549] [4: ueventd: 456] dual_role_get_local_prop : request prop = 1 , attached_state = 2, power_role = 1
[ 3.374657] [4: ueventd: 456] dual_role_get_local_prop : request prop = 2 , attached_state = 2, power_role = 1
[ 3.374759] [4: ueventd: 456] dual_role_get_local_prop : request prop = 3 , attached_state = 2, power_role = 1
[ 3.748176] [4: ueventd: 456] ueventd: Coldboot took 0.64s.
[ 3.751851] [0: init: 1] init: Waiting for /dev/.coldboot_done took 0.65s.
[ 3.752692] [0: init: 1] init: console init failed. Open on Console device failed(No such device)
[ 3.757842] [0: init: 1] LIBFFU: FFU Target : TSB UFS
[ 3.757920] [0: init: 1] LIBFFU: Don't need FFU
[ 3.767148] [0: init: 1] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
[ 3.767294] [0: init: 1] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
[ 3.767511] [0: init: 1] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory
[ 3.768881] [0: init: 1] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument
[ 3.777472] [4: init: 1] Registered swp emulation handler
[ 3.778289] [4: init: 1] init: write_file: Unable to open '/sys/fs/cgroup/memory/bg/memory.swappiness': No such file or directory
[ 3.778422] [4: init: 1] init: write_file: Unable to open '/sys/fs/cgroup/memory/bg/memory.move_charge_at_immigrate': No such file or directory
[ 3.781482] [0: init: 457] fs_mgr: debug: ro.security_mode is 1526595585
[ 3.781569] [0: init: 457] fs_mgr: KAP is enabled
[ 3.787896] [0: init: 457] fs_mgr: Verify signature ...
[ 3.793303] [0: init: 457] fs_mgr: Blob verification success : 0
[ 3.793413] [0: init: 457] fs_mgr: Enabling dm-verity for system (mode 0)
[ 3.793505] [1: kworker/u16:3: 274] fs_mgr: loading verity table: '1 /dev/block/bootdevice/by-name/system /dev/block/bootdevice/by-name/system 4096 4096 1181642 1181650 sha256 A446F768C2DFB5C89CD163E9FF7FE13560242310AB149DCA10D156BDDA8C04E3 21F73574378B29FF578B50164B5B5FE1732BBC1F172D6E709715AFE9ACE0081C 1 ignore_zero_blocks'
[ 3.796423] [1: kworker/u16:3: 274] device-mapper: verity: 259:3: block 0 is superblock. Skipping verity_handle_err
[ 3.800102] [0: init: 457] EXT4-fs (dm-0): mounting with "discard" option, but the device does not support discard
[ 3.800218] [0: init: 457] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: errors=panic
[ 3.800463] [0: init: 457] fs_mgr: __mount(source=/dev/block/dm-0,target=/system,type=ext4)=0
[ 3.800639] [0: init: 457] fs_mgr: __mount return 0(source=dm-0,target=/system,type=ext4,flags=1,options=errors=panic)
[ 3.800639] [0: init: 457]
[ 3.800911] [0: init: 457] fs_mgr: needs_block_encryption return false
[ 3.801448] [0: init: 457] fs_mgr: check skipping fsck status : 1
[ 3.801991] [0: init: 457] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/bootdevice/by-name/userdata for mount /data type ext4 )
[ 3.802325] [0: init: 457] init: SELinux: error labeling device: /dev/block/dm-0 u:object_r:system_block_device:s0
[ 3.802515] [0: init: 457] init: SELinux: getfilecon fail: /dev/block/bootdevice/by-name/hidden
[ 3.808342] [5: init: 1] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
[ 3.808694] [5: init: 1] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
[ 3.808988] [5: init: 1] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
[ 3.809318] [5: init: 1] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
[ 3.809621] [5: init: 1] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
[ 3.809947] [5: init: 1] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
[ 3.810230] [5: init: 1] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
[ 3.810530] [5: init: 1] init: ignored duplicate definition of service 'drm'init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
[ 3.810923] [5: init: 1] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
[ 3.811243] [5: init: 1] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
[ 3.811617] [5: init: 1] init: (Parsing /init.rilcarrier.rc took 0.00s.)
[ 3.811740] [5: init: 1] init: ignored duplicate definition of service 'qmuxd'init: ignored duplicate definition of service 'diag_mdlog_start'init: ignored duplicate definition of service 'diag_mdlog_stop'init: (Parsing /init.rilchip.rc took 0.00s.)
[ 3.812062] [5: init: 1] init: (Parsing /init.rilepdg.rc took 0.00s.)
[ 3.812148] [5: init: 1] init: could not import file '/init.rilmptcp.rc' from '/system/etc/init/init.rilcommon.rc': No such file or directory
[ 3.812279] [5: init: 1] init: (Parsing /system/etc/init/init.rilcommon.rc took 0.00s.)
[ 3.812570] [5: init: 1] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
[ 3.812864] [5: init: 1] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
[ 3.813194] [5: init: 1] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
[ 3.813494] [5: init: 1] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
[ 3.813785] [5: init: 1] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
[ 3.814067] [5: init: 1] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
[ 3.814390] [5: init: 1] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
[ 3.814677] [5: init: 1] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
[ 3.814978] [5: init: 1] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
[ 3.815858] [5: init: 1] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
[ 3.816183] [5: init: 1] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
[ 3.816467] [5: init: 1] init: (Parsing /system/etc/init/powersnd.rc took 0.00s.)
[ 3.816749] [5: init: 1] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
[ 3.817040] [5: init: 1] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
[ 3.817364] [5: init: 1] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
[ 3.817666] [5: init: 1] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
[ 3.817966] [5: init: 1] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
[ 3.818259] [5: init: 1] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
[ 3.820954] [5: init: 1] fs_mgr: Unable to open zram conf device /sys/block/zram0/disksize
[ 3.823886] [5: init: 1] init: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/cache
[ 3.833783] [0: e2fsck: 469] random: e2fsck urandom read with 87 bits of entropy available
[ 3.874921] [5: init: 1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.874921] [5: init: 1]
[ 3.875077] [5: init: 1] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear.
[ 3.875077] [5: init: 1]
[ 3.875229] [5: init: 1] e2fsck: check whether gdt & bitmap free count is vaild
[ 3.875229] [5: init: 1]
[ 3.875354] [5: init: 1] e2fsck: /dev/block/bootdevice/by-name/cache: clean, 25/38400 files, 5224/153600 blocks (check in 3 mounts)
[ 3.875354] [5: init: 1]
[ 3.875513] [5: init: 1] e2fsck: ext2fs_close2 : normal operation, return 0
[ 3.875513] [5: init: 1]
[ 3.877423] [5: init: 1] EXT4-fs (sda20): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic
[ 3.877820] [5: init: 1] init: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/persist
[ 3.891492] [2: init: 1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.891492] [2: init: 1]
[ 3.891619] [2: init: 1] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear.
[ 3.891619] [2: init: 1]
[ 3.891757] [2: init: 1] e2fsck: check whether gdt & bitmap free count is vaild
[ 3.891757] [2: init: 1]
[ 3.891886] [2: init: 1] e2fsck: /dev/block/bootdevice/by-name/persist: clean, 46/2048 files, 1199/8192 blocks (check in 2 mounts)
[ 3.891886] [2: init: 1]
[ 3.892054] [2: init: 1] e2fsck: ext2fs_close2 : normal operation, return 0
[ 3.892054] [2: init: 1]
[ 3.894807] [2: init: 1] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic
[ 3.895687] [4: init: 1] init: SELinux: Skipping restorecon_recursive(/persist)
[ 3.898313] [4: init: 1] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: barrier=1
[ 3.898543] [4: init: 1] init: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/efs
[ 3.921131] [1: init: 1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.921131] [1: init: 1]
[ 3.921260] [1: init: 1] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear.
[ 3.921260] [1: init: 1]
[ 3.921398] [1: init: 1] e2fsck: check whether gdt & bitmap free count is vaild
[ 3.921398] [1: init: 1]
[ 3.921528] [1: init: 1] e2fsck: /dev/block/bootdevice/by-name/efs has been mounted 10 times without being checked, check forced.
[ 3.921528] [1: init: 1]
[ 3.921694] [1: init: 1] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 3.921694] [1: init: 1]
[ 3.921820] [1: init: 1] e2fsck: Pass 2: Checking directory structure
[ 3.921820] [1: init: 1]
[ 3.921941] [1: init: 1] e2fsck: Pass 3: Checking directory connectivity
[ 3.921941] [1: init: 1]
[ 3.922065] [1: init: 1] e2fsck: Pass 4: Checking reference counts
[ 3.922065] [1: init: 1]
[ 3.922184] [1: init: 1] e2fsck: Pass 5: Checking group summary information
[ 3.922184] [1: init: 1]
[ 3.922311] [1: init: 1] e2fsck: /dev/block/bootdevice/by-name/efs: 176/1280 files (6.3% non-contiguous), 1314/5120 blocks
[ 3.922311] [1: init: 1]
[ 3.922472] [1: init: 1] e2fsck: ext2fs_close2 : normal operation, return 0
[ 3.922472] [1: init: 1]
[ 3.926485] [1: init: 1] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_checksum,data=ordered,errors=panic
[ 3.948117] [4: init: 1] FAT-fs (sda15[8:15]): trying to mount...
[ 3.949197] [4: init: 1] FAT-fs (sda15[8:15]): mounted successfully!
[ 3.949448] [4: init: 1] FAT-fs (sda16[259:0]): trying to mount...
[ 3.950511] [4: init: 1] FAT-fs (sda16[259:0]): mounted successfully!
[ 3.950668] [4: init: 1] FAT-fs (sdd10[8:58]): trying to mount...
[ 3.950965] [4: init: 1] FAT-fs (sdd10[8:58]): bogus number of reserved sectors
[ 3.951046] [4: init: 1] FAT-fs (sdd10[8:58]): Can't find a valid FAT filesystem
[ 3.951127] [4: init: 1] FAT-fs (sdd10[8:58]): failed to mount!
[ 3.951480] [4: init: 1] init: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/carrier
[ 3.965336] [2: init: 1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.965336] [2: init: 1]
[ 3.965463] [2: init: 1] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear.
[ 3.965463] [2: init: 1]
[ 3.965601] [2: init: 1] e2fsck: check whether gdt & bitmap free count is vaild
[ 3.965601] [2: init: 1]
[ 3.965731] [2: init: 1] e2fsck: /dev/block/bootdevice/by-name/carrier: clean, 11/2880 files, 1210/11520 blocks (check in 4 mounts)
[ 3.965731] [2: init: 1]
[ 3.965899] [2: init: 1] e2fsck: ext2fs_close2 : normal operation, return 0
[ 3.965899] [2: init: 1]
[ 3.968360] [2: init: 1] EXT4-fs (sda21): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,data=ordered,errors=panic
[ 3.969219] [2: init: 1] init: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/omr
[ 3.983150] [2: init: 1] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.983150] [2: init: 1]
[ 3.983278] [2: init: 1] e2fsck: Skip journal recovery because INCOMPAT_RECOVER was clear.
[ 3.983278] [2: init: 1]
[ 3.983416] [2: init: 1] e2fsck: check whether gdt & bitmap free count is vaild
[ 3.983416] [2: init: 1]
[ 3.983546] [2: init: 1] e2fsck: /dev/block/bootdevice/by-name/omr: clean, 11/640 files, 1070/2560 blocks (check in 2 mounts)
[ 3.983546] [2: init: 1]
[ 3.983709] [2: init: 1] e2fsck: ext2fs_close2 : normal operation, return 0
[ 3.983709] [2: init: 1]
[ 3.985942] [2: init: 1] EXT4-fs (sda22): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,data=ordered,errors=panic
[ 3.987460] [2: init: 1] init: Starting service 'logd'...
[ 3.997742] [1: init: 1] init: SELinux: Could not set context for /sys/kernel/debug/tracing: Operation not supported on transport endpoint
[ 4.003468] [4: init: 1] init: SELinux: Skipping restorecon_recursive(/cache)
[ 4.006010] [4: init: 1] init: Starting service 'qseecomd'...
[ 4.006587] [4: init: 1] init: Service exec 1 (/system/bin/init.qcom.qseecomd.sh) does not have a SELinux domain defined.
[ 4.006796] [4: init: 1] subsys-restart: __subsystem_get(): ipa_fws subsys count:0
[ 4.009326] [4: init: 1] subsys-pil-tz soc:qcom,ipa_fws@1e08000: ipa_fws: loading from 0x00000000f4e00000 to 0x00000000f4e05000
[ 4.048058] [6: init: 1] subsys-pil-tz soc:qcom,ipa_fws@1e08000: ipa_fws: Brought out of reset
[ 4.048252] [6: init: 1] gsi soc:qcom,msm_gsi: gsi_register_device:762 GSI irq is wake enabled 30
[ 4.048476] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 1
[ 4.048569] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 0 state updated to 1
[ 4.048719] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 2
[ 4.048835] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 1 state updated to 1
[ 4.048998] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 4
[ 4.049086] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 2 state updated to 1
[ 4.049261] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 8
[ 4.049374] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 3 state updated to 1
[ 4.049522] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 10
[ 4.049630] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 4 state updated to 1
[ 4.049793] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 20
[ 4.049882] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 5 state updated to 1
[ 4.050038] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 40
[ 4.050127] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 6 state updated to 1
[ 4.050267] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 80
[ 4.050367] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 7 state updated to 1
[ 4.050514] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 100
[ 4.050604] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 8 state updated to 1
[ 4.050787] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 200
[ 4.050886] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 9 state updated to 1
[ 4.051034] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 20000000
[ 4.051134] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 29 state updated to 1
[ 4.051275] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 1
[ 4.051373] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 0 state updated to 0
[ 4.051532] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 2
[ 4.051639] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 1 state updated to 0
[ 4.051788] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 4
[ 4.051875] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 2 state updated to 0
[ 4.052010] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 8
[ 4.052097] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 3 state updated to 0
[ 4.052249] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 10
[ 4.052337] I[0: kworker/u16:4: 292] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 4 state updated to 0
[ 4.052501] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 20
[ 4.052590] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 5 state updated to 0
[ 4.052727] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 40
[ 4.052836] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 6 state updated to 0
[ 4.052965] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 80
[ 4.053069] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 7 state updated to 0
[ 4.053209] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 100
[ 4.053305] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 8 state updated to 0
[ 4.053436] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 200
[ 4.053524] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 9 state updated to 0
[ 4.054474] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 40
[ 4.054571] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 6 state updated to 1
[ 4.054714] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 40
[ 4.054807] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 6 state updated to 2
[ 4.056987] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 80
[ 4.057075] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 7 state updated to 1
[ 4.057221] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 80
[ 4.057310] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 7 state updated to 2
[ 4.059851] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 800
[ 4.059939] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 11 state updated to 1
[ 4.060086] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:110 ch 800
[ 4.060174] I[0: swapper/0: 0] gsi soc:qcom,msm_gsi: gsi_handle_ch_ctrl:124 ch 11 state updated to 2
[ 4.060548] [6: kworker/6:1: 357] rmnet_ipa3 started initialization
[ 4.060621] [6: kworker/6:1: 357] IPA SSR support = True
[ 4.060679] [6: kworker/6:1: 357] IPA ipa-loaduC = True
[ 4.060735] [6: kworker/6:1: 357] IPA SG support = True
[ 4.060789] [6: kworker/6:1: 357] IPA Napi Enable = False
[ 4.060846] [6: kworker/6:1: 357] using default for wan-rx-desc-size = 256
[ 4.060940] [6: init: 1] IPA driver initialization was successful.
[ 4.063632] [6: kworker/6:1: 357] ipa ipa3_uc_state_check:307 uC is not loaded
[ 4.063808] [0: init: 1] init: property_set("ro.hwui.texture_cache_size", "72") failed
[ 4.063993] [0: init: 1] init: property_set("ro.hwui.layer_cache_size", "48") failed
[ 4.064190] [0: init: 1] init: property_set("ro.hwui.r_buffer_cache_size", "8") failed
[ 4.064356] [0: init: 1] init: property_set("ro.hwui.path_cache_size", "32") failed
[ 4.064467] [0: init: 1] init: property_set("ro.hwui.gradient_cache_size", "1") failed
[ 4.064631] [0: init: 1] init: property_set("ro.hwui.drop_shadow_cache_size", "6") failed
[ 4.064804] [0: init: 1] init: property_set("ro.hwui.texture_cache_flushrate", "0.4") failed
[ 4.064979] [0: init: 1] init: property_set("ro.hwui.text_small_cache_width", "1024") failed
[ 4.065127] [4: kworker/4:0: 25] usb: [M] muic_work_without_ccic: working state=0, vbus=LOW
[ 4.065286] [5: init: 1] init: property_set("ro.hwui.text_small_cache_height", "1024") failed
[ 4.065442] [5: init: 1] init: property_set("ro.hwui.text_large_cache_width", "2048") failed
[ 4.065580] [5: init: 1] init: property_set("ro.hwui.text_large_cache_height", "1024") failed
[ 4.065815] [5: init: 1] init: property_set("ro.use_data_netmgrd", "true") failed
[ 4.066148] [6: kworker/6:1: 357] rmnet_ipa completed initialization
[ 4.066392] [5: init: 1] init: (Loading properties from /system/build.prop took 0.00s.)
[ 4.067655] [5: init: 1] init: (Loading properties from /system/vendor/carrier/ATT/build.prop took 0.00s.)
[ 4.067804] [5: init: 1] init: (Loading properties from /vendor/build.prop took 0.00s.)
[ 4.067901] [5: init: 1] init: (Loading properties from /factory/factory.prop took 0.00s.)
[ 4.068057] [5: init: 1] init: /recovery not specified in fstab
[ 4.068289] [5: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 4.068606] [4: qseecomd: 488] capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
[ 4.068837] [5: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 4.071024] [5: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts.bin.
[ 4.071324] [5: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 4.072298] [5: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 4.074906] [5: init: 1] init: Starting service 'debuggerd'...
[ 4.075484] [5: init: 1] init: Starting service 'debuggerd64'...
[ 4.076035] [5: init: 1] init: Starting service 'vold'...
[ 4.076437] [5: init: 1] subsys-restart: __subsystem_get(): adsp subsys count:0
[ 4.077816] [5: init: 1] subsys-pil-tz 17300000.qcom,lpass: adsp: loading from 0x0000000091900000 to 0x0000000094000000
[ 4.104816] [1: kworker/1:1: 377] random: nonblocking pool is initialized
[ 4.285089] [7: kworker/7:2: 422] check_magic_data
[ 4.287577] [7: kworker/7:2: 422] sec_debug_update_reset_reason : partition[9] result[NP]
[ 4.287690] [1: kworker/u16:4: 292] ap_health_work_write_fn - start.
[ 4.288395] [2: kworker/u16:4: 292] ap_health_work_write_fn - end, will retry, wr(1).
[ 4.330583] [5: init: 1] subsys-pil-tz 17300000.qcom,lpass: adsp: Brought out of reset
[ 4.339531] [0:smem_native_lpa: 52] apr_tal_link_state_cb: edge[lpass] link state[0]
[ 4.341908] I[0: swapper/0: 0] subsys-pil-tz 17300000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 4.342072] [3: irq/557-adsp: 376] subsys-pil-tz 17300000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 4.342627] [5: init: 1] slpi_loader_do: msm version(0x20001) for SLPI image
[ 4.342711] [5: init: 1] subsys-restart: __subsystem_get(): slpi subsys count:0
[ 4.351456] [5: init: 1] subsys-pil-tz 5c00000.qcom,ssc: slpi: loading from 0x0000000094500000 to 0x0000000095100000
[ 4.447308] [0: kworker/u16:0: 6] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
[ 4.450423] [4: kworker/u16:2: 63] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
[ 4.458769] [1: kworker/1:1: 377] sps:BAM 0x0000000017184000 (va:0xffffff800d0c0000) enabled: ver:0x19, number of pipes:31
[ 4.458885] [0: ngd_notify_sl1: 405] sps:BAM 0x0000000017184000 is registered.
[ 4.460157] [0: ngd_notify_sl1: 405] wcd-slim tavil-slim-pgd: Platform data from device tree
[ 4.460324] [0: ngd_notify_sl1: 405] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
[ 4.460465] [0: ngd_notify_sl1: 405] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
[ 4.460606] [0: ngd_notify_sl1: 405] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[ 4.460747] [0: ngd_notify_sl1: 405] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[ 4.460887] [0: ngd_notify_sl1: 405] wcd-slim tavil-slim-pgd: msm_cdc_dt_parse_vreg_info: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[ 4.461480] [0: ngd_notify_sl1: 405] wcd-slim tavil-slim-pgd: wcd9xxx_validate_dmic_sample_rate: Invalid ecpp_dmic_rate = 0, for mclk 9600000
[ 4.461616] [0: ngd_notify_sl1: 405] wcd-slim tavil-slim-pgd: wcd9xxx_slim_probe: probing for wcd type: 4, name: tavil-slim-pgd
[ 4.500962] [5: init: 1] pil_auth_and_reset, slpi gpio_sensor_ldo(126) enable(1)
[ 4.501053] [5: init: 1] subsys-pil-tz 5c00000.qcom,ssc: slpi: Brought out of reset
[ 4.515724] [1: kworker/u16:8: 370] slimbus:1 laddr:0xcf, EAPC:0x1:0x50
[ 4.515835] [1: kworker/u16:8: 370] wcd-slim tavil-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
[ 4.516027] [0: ngd_notify_sl1: 405] slimbus:1 laddr:0xce, EAPC:0x0:0x50
[ 4.516804] [0: ngd_notify_sl1: 405] wcd-slim tavil-slim-pgd: wcd934x_get_codec_info: wcd9xxx chip id major 0x108, minor 0x1
[ 4.516922] [0: ngd_notify_sl1: 405] wcd9xxx_core_res_init: num_irqs = 32, num_irq_regs = 4
[ 4.533438] [1: kworker/u16:8: 370] msm8998-asoc-snd 1711a000.sound-tavil: ASoC: CODEC DAI tavil_vifeedback not registered
[ 4.539666] [3: irq/589-slpi: 380] subsys-pil-tz 5c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
[ 4.539765] I[0: swapper/0: 0] subsys-pil-tz 5c00000.qcom,ssc: Subsystem error monitoring/handling services are up
[ 4.540508] [5: init: 1] slpi_loader_do: slpi for 1M
[ 4.540613] [5: init: 1] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded
[ 4.540918] [4: kworker/u16:8: 370] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
[ 4.541072] [0: kworker/u16:2: 63] diag: In diag_send_feature_mask_update, control channel is not open, p: 3, 0000000000000000
[ 4.541482] [5: init: 1] init: Not bootcharting.
[ 4.547713] [5: init: 1] init: Starting service 'auditd'...
[ 4.553900] [1: kworker/u16:7: 295] tavil_codec tavil_codec: tavil_soc_codec_probe()
[ 4.554017] [1: kworker/u16:7: 295] wcd_mbhc_init: enter
[ 4.554085] [1: kworker/u16:7: 295] msm8998-asoc-snd 1711a000.sound-tavil: mbhc: det_debounce_time_ms 50, amux_channel 18
[ 4.554648] [1: kworker/u16:7: 295] msm8998-asoc-snd 1711a000.sound-tavil: det-zones-list 2, 0, 2
[ 4.555201] [4: kworker/u16:7: 295] msm8998-asoc-snd 1711a000.sound-tavil: det-zones-list 2, 690, 2
[ 4.555535] [4: kworker/u16:7: 295] msm8998-asoc-snd 1711a000.sound-tavil: det-zones-list 2, 691, 1
[ 4.555782] [4: kworker/u16:7: 295] msm8998-asoc-snd 1711a000.sound-tavil: det-zones-list 2, 9999, 1
[ 4.561418] [4: kworker/u16:7: 295] wcd_mbhc_init: leave ret 0
[ 4.563898] [5: init: 1] init: Service 'auditd' (pid 545) exited with status 0
[ 4.564586] [5: init: 1] init: SELINUX: pkgdir_selabel_lookup, reloading seapp_contexts only once, pathname:/data/user_de/0, uid:-1
[ 4.564586] [5: init: 1] init: SELinux selinux_android_compute_policy_index : Policy Index[2], Con:u:r:init:s0 RAM:SEPF_SECMOBILE_7.0_0005, [-1 -1 -1 -1 0 1]
[ 4.565596] [4: kworker/4:0: 25] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 4.565707] [4: kworker/4:0: 25] init: SELINUX: pkgdir_selabel_lookup, reloading seapp_contexts only once, pathname:/data/user/0, uid:-1
[ 4.565707] [4: kworker/4:0: 25]
[ 4.565858] [4: kworker/4:0: 25] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 4.566902] [4: kworker/u16:7: 295] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: for wdsp segments only will be dumped.
[ 4.567139] [4: kworker/u16:7: 295] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: bound tavil_codec (ops wcd_ctrl_component_ops)
[ 4.567555] [4: kworker/u16:7: 295] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: bound spi10.0 (ops wcd_spi_component_ops)
[ 4.567890] [4: kworker/u16:7: 295] wcd-dsp-mgr soc:qcom,wcd-dsp-mgr: bound soc:qcom,glink-spi-xprt-wdsp (ops glink_component_ops)
[ 4.570044] [5: init: 1] init: Starting service 'exec 2 (/system/bin/tzdatacheck)'...
[ 4.571884] [4: kworker/u16:7: 295] q6audio_adaptation_platform_probe: platform
[ 4.587592] [5: init: 1] init: Service 'exec 2 (/system/bin/tzdatacheck)' (pid 547) exited with status 0
[ 4.606474] [5: init: 1] init: Starting service 'perfd'...
[ 4.608733] [5: init: 1] init: write_file: Unable to open '/sys/block/dm-0/queue/read_ahead_kb': Permission denied
[ 4.608861] [5: init: 1] init: write_file: Unable to open '/sys/block/dm-1/queue/read_ahead_kb': No such file or directory
[ 4.612271] [5: init: 1] init: Starting service 'macloader'...
[ 4.617659] [5: init: 1] init: Unable to open persistent property file "persist.radio.carrier.enable": No such file or directory
[ 4.623318] [7: init: 1] init: Starting service 'logd-reinit'...
[ 4.623999] [7: init: 1] init: Starting service 'scs'...
[ 4.624551] [7: init: 1] init: Starting service 'exec 3 (/init.qcom.early_boot.sh)'...
[ 4.636847] [6: sh: 553] macloader: macloader triggered
[ 4.636919] [1: logd.daemon: 489] logd.daemon: reinit
[ 4.637891] [7: init: 1] init: Service 'logd-reinit' (pid 551) exited with status 0
[ 4.646608] [0: sh: 555] macloader: Not yet wlan interface loaded
[ 4.647551] [6: init: 1] init: Service 'scs' (pid 552) exited with status 0
[ 4.673619] [2: kworker/u16:7: 295] msm_ext_disp_register_audio_codec: audio codec registered
[ 4.673971] [2: kworker/u16:7: 295] max98506 18-0031: build number 0.00.0010
[ 4.674886] [2: kworker/u16:7: 295] [MAX98506_DEBUG] max98506_check_version: rev_id_l 0x80
[ 4.674970] [2: kworker/u16:7: 295] [MAX98506_DEBUG] max98506_probe: device version 0x80
[ 4.684788] [5: kworker/u16:7: 295] [MAX98506_DEBUG] max98506_set_slave: enter
[ 4.687929] [5: kworker/u16:7: 295] [MAX98506_DEBUG] max98506_handle_pdata: [0x1f, 0x00]
[ 4.688664] [5: kworker/u16:7: 295] [MAX98506_DEBUG] max98506_handle_pdata: [0x21, 0xc0]
[ 4.689388] [5: kworker/u16:7: 295] [MAX98506_DEBUG] max98506_handle_pdata: [0x2f, 0x00]
[ 4.690367] [4: kworker/u16:7: 295] [MAX98506_DEBUG] max98506_probe: g_class=ffffffc0f7f9a780 ffffffc0f7f9a780
[ 4.690465] [4: kworker/u16:7: 295] [MAX98506_DEBUG] max98506_probe: exit 0
[ 4.700483] [4: kworker/u16:7: 295] msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx
[ 4.704915] [2:smem_native_lpa: 52] apr_tal_notify_state: Channel state[0]
[ 4.739776] [6: init: 1] init: property_set("ro.sf.lcd_density", "560") failed
[ 4.801047] [6: init: 1] init: property_set("ro.sf.lcd_density", "480") failed
[ 4.981092] [6: init: 1] init: Service 'exec 3 (/init.qcom.early_boot.sh)' (pid 554) exited with status 0
[ 4.982206] [6: init: 1] init: write_file: Unable to open '/proc/sys/vm/min_free_order_shift': No such file or directory
[ 4.991568] [6: init: 1] [sec_input] volume_up wakeup status 0
[ 4.991640] [6: init: 1] [sec_input] wink_key default wakeup status 1
[ 4.995739] [6: init: 1] init: Starting service 'healthd'...
[ 4.996187] [6: init: 1] init: cannot find '/system/bin/sysmon' (No such file or directory), disabling 'sysmon'
[ 4.996354] [6: init: 1] init: Starting service 'prepare_param'...
[ 4.996806] [6: init: 1] init: Starting service 'qcom-c_core-sh'...
[ 4.997379] [6: init: 1] init: Starting service 'irsc_util'...
[ 4.997955] [6: init: 1] init: Starting service 'rmt_storage'...
[ 4.998415] [6: init: 1] init: cannot find '/system/bin/rfs_access' (No such file or directory), disabling 'rfs_access'
[ 4.998681] [6: init: 1] init: Starting service 'tftp_server'...
[ 4.999164] [6: init: 1] init: Starting service 'sensor-sh'...
[ 4.999670] [6: init: 1] init: Starting service 'cs-early-boot'...
[ 4.999833] [0: healthd: 576] binder: 576:576 transaction failed 29189, size 0-0
[ 5.000100] [6: init: 1] init: Starting service 'qcom-usb-sh'...
[ 5.000587] [6: init: 1] init: Starting service 'per_mgr'...
[ 5.000983] [6: init: 1] init: cannot find '/system/vendor/bin/pd-mapper' (No such file or directory), disabling 'pd_mapper'
[ 5.001116] [6: init: 1] init: Starting service 'swapon'...
[ 5.001664] [6: init: 1] init: Starting service 'lmkd'...
[ 5.002133] [6: init: 1] init: Starting service 'servicemanager'...
[ 5.002644] [6: init: 1] init: Starting service 'surfaceflinger'...
[ 5.006433] [6: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
[ 5.006591] [6: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
[ 5.006762] [6: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
[ 5.006977] [6: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
[ 5.007164] [6: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory