blob: 4598050704ea9d220d4e37b70ad0f93911574f5c [file] [log] [blame]
<6>[ 0.000000] Booting Linux on physical CPU 0x100
<6>[ 0.000000] Initializing cgroup subsys cpu
<6>[ 0.000000] Initializing cgroup subsys cpuacct
<5>[ 0.000000] Linux version 3.10.9-4521975 (dpi@SWDD6017) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu May 21 11:01:24 KST 2015
<4>[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
<4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>[ 0.000000] Machine: universal5422, model: Samsung K 3G EUR revision 10 board based on EXYNOS5422
<6>[ 0.000000] tima :sec_tima_log_eary_setup, base:46202000, size:200000
<6>[ 0.000000] RKP :tima_setup_rkp_mem, base:50300000, size:100000
<6>[ 0.000000] RKP :tima_setup_rkp_mem, base:4e000000, size:100000
<6>[ 0.000000] RKP :tima_setup_rkp_mem, base:4d800000, size:40000
<6>[ 0.000000] RKP :tima_setup_rkp_mem, base:4d900000, size:600000
<6>[ 0.000000] RKP :tima_setup_rkp_mem, base:4d700000, size:1000
<6>[ 0.000000] ION: Contiguous 0x400000 bytes @ 0x0 defined for 0:common
<6>[ 0.000000] ION: Contiguous 0x100000 bytes @ 0x0 defined for 2:mfc_sh
<6>[ 0.000000] ION: Contiguous 0x800000 bytes @ 0x0 defined for 10:g2d_wfd
<6>[ 0.000000] ION: Contiguous 0xa800000 bytes @ 0x0 defined for 11:video
<6>[ 0.000000] ION: Contiguous 0x100000 bytes @ 0x0 defined for 9:sectbl
<6>[ 0.000000] ION: Contiguous 0x100000 bytes @ 0x0 defined for 8:mfc_fw
<6>[ 0.000000] ION: Contiguous 0x100000 bytes @ 0x0 defined for 12:mfc_nfw
<6>[ 0.000000] ION: Contiguous 0x20000 bytes @ 0x0 defined for 13:secdma
<6>[ 0.000000] cma: CMA: reserved 4 MiB at be600000
<6>[ 0.000000] cma: CMA: reserved 1 MiB at be500000
<6>[ 0.000000] cma: CMA: reserved 8 MiB at bdd00000
<6>[ 0.000000] cma: CMA: reserved 168 MiB at b3500000
<6>[ 0.000000] cma: CMA: reserved 1 MiB at b3400000
<6>[ 0.000000] cma: CMA: reserved 1 MiB at b3300000
<6>[ 0.000000] cma: CMA: reserved 1 MiB at b3200000
<6>[ 0.000000] cma: CMA: reserved 0 MiB at b31e0000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<4>[ 0.000000] CPU EXYNOS5422 (id 0xe5422001)
<0>[ 0.000000] (sec_debug_set_upload_magic) 66262564
<0>[ 0.000000] (sec_debug_set_upload_cause) cafebabe
<7>[ 0.000000] On node 0 totalpages: 518656
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0f5a340, node_mem_map c220a000
<7>[ 0.000000] Normal zone: 1504 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 192512 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 2548 pages used for memmap
<7>[ 0.000000] HighMem zone: 326144 pages, LIFO batch:31
<6>[ 0.000000] sec_debug_magic_init: success reserving magic code area
<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c321d000 s14016 r0 d14656 u32768
<7>[ 0.000000] pcpu-alloc: s14016 r0 d14656 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517152
<5>[ 0.000000] Kernel command line: console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 printk.core_num=1 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_tima_log=0x200000@0x46202000 sec_avc_log=0x40000@0x46404000 s3cfb.bootloaderfb=0x87000000 lcdtype=6432787 consoleblank=0 lpj=3977216 vmalloc=256m sec_debug.reset_reason=7 noexec=off oops=panic pmic_info=83 cordon=c6b63fdbd44774464759bbd6deedd5fe connie=SM-G900H_OPEN_EUR_5f156514fe69b820692ceb1e3888c27d androidboot.emmc_checksum=3 androidboot.boot_salescode= androidboot.odin_download=1 androidboot.bootloader=G900HXXU1BOE2 androidboot.selinux=enforcing androidboot.hardware=universal5422 androidboot.warranty_bit=0 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=4d0018234e29316b snd_soc_core.pmdown_time=1000
<3>[ 0.000000] [c0] sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:18bf45 sec_log_buf:f7200000 sec_log_size:2097152
<6>[ 0.000000] [c0] sec_log_save_old: saved old log at 524288@c325c000
<6>[ 0.000000] [c0] sec_getlog_supply_kloginfo: 0xc6000000
<6>[ 0.000000] [c0] sec_avc_log_setup: *sec_avc_log_ptr:2a7 sec_avc_log_buf:c6404000 sec_log_size:0x40000
<6>[ 0.000000] [c0] lcdtype_setup: lcdtype: 622813
<6>[ 0.000000] [c0] muic-max77804k:set_switch_sel switch_sel: 0x3
<6>[ 0.000000] [c0] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] [c0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] [c0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] [c0] Memory: 2026MB = 2026MB total
<5>[ 0.000000] [c0] Memory: 1834940k/1834940k available, 239684k reserved, 1116032K highmem
<5>[ 0.000000] [c0] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] vmalloc : 0xef800000 - 0xff000000 ( 248 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xef000000 ( 752 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc0c07fd4 (12288 kB)
<5>[ 0.000000] .init : 0xc0d00000 - 0xc0e036c0 (1038 kB)
<5>[ 0.000000] .data : 0xc0e04000 - 0xc0f60420 (1394 kB)
<5>[ 0.000000] .bss : 0xc0f60420 - 0xc11a6ed4 (2331 kB)
<6>[ 0.000000] [c0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.000000] [c0] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] [c0] NR_IRQS:16 nr_irqs:16 16
<6>[ 0.000000] [c0] apll 800000000
<6>[ 0.000000] [c0] bpll 825000000
<6>[ 0.000000] [c0] cpll 666000000
<6>[ 0.000000] [c0] dpll 600000000
<6>[ 0.000000] [c0] epll 66000000
<6>[ 0.000000] [c0] rpll 66000000
<6>[ 0.000000] [c0] ipll 432000000
<6>[ 0.000000] [c0] spll 800000000
<6>[ 0.000000] [c0] dout_spll_ctrl_div2 400000000
<6>[ 0.000000] [c0] vpll 400000000
<6>[ 0.000000] [c0] mpll 532000000
<6>[ 0.000000] [c0] Clock enables : TOP, MIF
<6>[ 0.000000] [c0] mmc0: dout_mmc0 666000000
<6>[ 0.000000] [c0] mmc1: dout_mmc1 800000000
<6>[ 0.000000] [c0] mmc2: dout_mmc2 666000000
<6>[ 0.000000] [c0] scaler: dout_aclk_400_mscl 333000000 aclk_400_mscl 333000000
<6>[ 0.000000] [c0] [g2d_init_clock:326] aclk_333_g2d:333000000
<6>[ 0.000000] [c0] gscaler: dout_aclk_300_gscl 300000000 aclk_300_gscl 300000000
<6>[ 0.000000] [c0] [jpeg_clock_init:378]jpeg: dout_aclk_300_jpeg 300000000 aclk_300_jpeg 300000000
<6>[ 0.000000] [c0] mfc: aclk_333 400000000
<6>[ 0.000000] [c0] Exynos5422: clock setup completed
<6>[ 0.000000] [c0] Exynos: pwm: clock setup completed
<6>[ 0.000000] [c0] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[ 0.000000] [c0] Switching to timer-based delay loop
<6>[ 0.000000] [c0] EXYNOS5422 PMU Initialize
<6>[ 0.000000] [c0] Console: colour dummy device 80x30
<6>[ 0.000000] [c0] Enable Console Clock to add refference counter
<3>[ 0.000000] [c0] Can't get console-pclk2!(it's not err)
<3>[ 0.000000] [c0] Can't get console-sclk2!(it's not err)
<6>[ 0.000726] [c0] Calibrating delay loop (skipped) preset value.. 1590.88 BogoMIPS (lpj=3977216)
<6>[ 0.000750] [c0] pid_max: default: 32768 minimum: 301
<6>[ 0.001030] [c0] Security Framework initialized
<6>[ 0.001057] [c0] SELinux: Initializing.
<7>[ 0.001109] [c0] SELinux: Starting in enforcing mode
<6>[ 0.001201] [c0] Mount-cache hash table entries: 512
<6>[ 0.039726] [c0] Initializing cgroup subsys debug
<6>[ 0.039756] [c0] Initializing cgroup subsys freezer
<6>[ 0.039822] [c0] CPU: Testing write buffer coherency: ok
<3>[ 0.040404] [c0] /cpus/cpu@0 missing clock-frequency property
<3>[ 0.040429] [c0] /cpus/cpu@1 missing clock-frequency property
<3>[ 0.040448] [c0] /cpus/cpu@2 missing clock-frequency property
<3>[ 0.040468] [c0] /cpus/cpu@3 missing clock-frequency property
<3>[ 0.040486] [c0] /cpus/cpu@4 missing clock-frequency property
<3>[ 0.040504] [c0] /cpus/cpu@5 missing clock-frequency property
<3>[ 0.040522] [c0] /cpus/cpu@6 missing clock-frequency property
<3>[ 0.040540] [c0] /cpus/cpu@7 missing clock-frequency property
<6>[ 0.040625] [c0] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
<6>[ 0.040904] [c0] Running under secure firmware.
<6>[ 0.040952] [c0] Setting up static identity map for 0xc07ee490 - 0xc07ee4e8
<7>[ 0.312159] [c0] cpu1: SWRESET
<4>[ 0.312439] [c1] CPU1: Booted secondary processor
<6>[ 0.312478] [c1] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
<7>[ 0.322091] [c0] cpu2: SWRESET
<4>[ 0.322365] [c2] CPU2: Booted secondary processor
<6>[ 0.322396] [c2] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
<7>[ 0.332077] [c0] cpu3: SWRESET
<4>[ 0.332354] [c3] CPU3: Booted secondary processor
<6>[ 0.332384] [c3] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
<4>[ 0.341222] [c4] CPU4: Booted secondary processor
<6>[ 0.342086] [c4] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
<4>[ 0.351226] [c5] CPU5: Booted secondary processor
<6>[ 0.352099] [c5] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
<4>[ 0.361220] [c6] CPU6: Booted secondary processor
<6>[ 0.362093] [c6] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
<4>[ 0.371220] [c7] CPU7: Booted secondary processor
<6>[ 0.372093] [c7] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
<6>[ 0.372269] [c0] Brought up 8 CPUs
<6>[ 0.372331] [c0] SMP: Total of 8 processors activated (12727.09 BogoMIPS).
<6>[ 0.372347] [c0] CPU: All CPU(s) started in SVC mode.
<6>[ 0.374148] [c0] devtmpfs: initialized
<6>[ 0.398909] [c6] sched: registering cpufreq notifiers for scale-invariant loads
<6>[ 0.400273] [c6] pinctrl core: initialized pinctrl subsystem
<6>[ 0.401249] [c6] regulator-dummy: no parameters
<6>[ 0.401766] [c6] NET: Registered protocol family 16
<6>[ 0.403535] [c6] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<7>[ 0.411603] [c6] gpiochip_add: registered GPIOs 0 to 7 on device: gpy7
<7>[ 0.411836] [c6] gpiochip_add: registered GPIOs 8 to 15 on device: gpx0
<7>[ 0.412069] [c6] gpiochip_add: registered GPIOs 16 to 23 on device: gpx1
<7>[ 0.412330] [c6] gpiochip_add: registered GPIOs 24 to 31 on device: gpx2
<7>[ 0.412558] [c6] gpiochip_add: registered GPIOs 32 to 39 on device: gpx3
<7>[ 0.414159] [c6] gpiochip_add: registered GPIOs 40 to 47 on device: gpc0
<7>[ 0.414394] [c6] gpiochip_add: registered GPIOs 48 to 55 on device: gpc1
<7>[ 0.414621] [c6] gpiochip_add: registered GPIOs 56 to 62 on device: gpc2
<7>[ 0.414849] [c6] gpiochip_add: registered GPIOs 63 to 66 on device: gpc3
<7>[ 0.415081] [c6] gpiochip_add: registered GPIOs 67 to 68 on device: gpc4
<7>[ 0.415311] [c6] gpiochip_add: registered GPIOs 69 to 76 on device: gpd1
<7>[ 0.415545] [c6] gpiochip_add: registered GPIOs 77 to 82 on device: gpy0
<7>[ 0.415779] [c6] gpiochip_add: registered GPIOs 83 to 86 on device: gpy1
<7>[ 0.416004] [c6] gpiochip_add: registered GPIOs 87 to 92 on device: gpy2
<7>[ 0.416227] [c6] gpiochip_add: registered GPIOs 93 to 100 on device: gpy3
<7>[ 0.416462] [c6] gpiochip_add: registered GPIOs 101 to 108 on device: gpy4
<7>[ 0.416689] [c6] gpiochip_add: registered GPIOs 109 to 116 on device: gpy5
<7>[ 0.416915] [c6] gpiochip_add: registered GPIOs 117 to 124 on device: gpy6
<7>[ 0.420822] [c6] gpiochip_add: registered GPIOs 125 to 132 on device: gpe0
<7>[ 0.421056] [c6] gpiochip_add: registered GPIOs 133 to 134 on device: gpe1
<7>[ 0.421288] [c6] gpiochip_add: registered GPIOs 135 to 140 on device: gpf0
<7>[ 0.421523] [c6] gpiochip_add: registered GPIOs 141 to 148 on device: gpf1
<7>[ 0.421748] [c6] gpiochip_add: registered GPIOs 149 to 156 on device: gpg0
<7>[ 0.421986] [c6] gpiochip_add: registered GPIOs 157 to 164 on device: gpg1
<7>[ 0.422337] [c6] gpiochip_add: registered GPIOs 165 to 166 on device: gpg2
<7>[ 0.422570] [c6] gpiochip_add: registered GPIOs 167 to 170 on device: gpj4
<7>[ 0.424960] [c6] gpiochip_add: registered GPIOs 171 to 178 on device: gpa0
<7>[ 0.425194] [c6] gpiochip_add: registered GPIOs 179 to 184 on device: gpa1
<7>[ 0.425431] [c6] gpiochip_add: registered GPIOs 185 to 192 on device: gpa2
<7>[ 0.425671] [c6] gpiochip_add: registered GPIOs 193 to 197 on device: gpb0
<7>[ 0.425904] [c6] gpiochip_add: registered GPIOs 198 to 202 on device: gpb1
<7>[ 0.426141] [c6] gpiochip_add: registered GPIOs 203 to 206 on device: gpb2
<7>[ 0.426377] [c6] gpiochip_add: registered GPIOs 207 to 214 on device: gpb3
<7>[ 0.426608] [c6] gpiochip_add: registered GPIOs 215 to 216 on device: gpb4
<7>[ 0.426845] [c6] gpiochip_add: registered GPIOs 217 to 224 on device: gph0
<7>[ 0.429426] [c6] gpiochip_add: registered GPIOs 225 to 231 on device: gpz
<4>[ 0.468318] [c7] S3C Power Management, Copyright 2004 Simtec Electronics
<6>[ 0.473904] [c7] PM DOMAIN: pd-cam has a new child pd-isp.
<6>[ 0.474755] [c7] PM DOMAIN: pd-gscl has a new child pd-cam.
<6>[ 0.474801] [c7] EXYNOS5: PM Domain Initialize
<6>[ 0.475103] [c7] pd-gscl - on
<6>[ 0.475229] [c7] pd-isp - on
<6>[ 0.475354] [c7] pd-mfc - on
<6>[ 0.475480] [c7] pd-g3d - on
<6>[ 0.475605] [c7] pd-disp1 - on
<6>[ 0.475734] [c7] pd-maudio - on
<6>[ 0.475751] [c7] pd-g2d - on, always
<6>[ 0.475879] [c7] pd-mscl - on
<6>[ 0.475898] [c7] pd-fsys - on, always
<6>[ 0.475915] [c7] pd-psgen - on, always
<6>[ 0.475932] [c7] pd-peric - on, always
<6>[ 0.475947] [c7] pd-wcore - on, always
<6>[ 0.476077] [c7] pd-cam - on
<6>[ 0.476120] [c7] EXYNOS: Initializing architecture
<6>[ 0.477770] [c7] exynos-sysmmu 13c40000.sysmmu: No gating clock found.
<6>[ 0.477930] [c7] exynos-sysmmu 13c40000.sysmmu: --> 13c00000.fimc_is_sensor
<6>[ 0.477948] [c7] exynos-sysmmu 13c40000.sysmmu: [OK]
<6>[ 0.478111] [c7] exynos-sysmmu 13c50000.sysmmu: No gating clock found.
<6>[ 0.478264] [c7] exynos-sysmmu 13c50000.sysmmu: --> 13c10000.fimc_is_sensor
<6>[ 0.478284] [c7] exynos-sysmmu 13c50000.sysmmu: [OK]
<6>[ 0.478443] [c7] exynos-sysmmu 13d50000.sysmmu: No gating clock found.
<6>[ 0.478598] [c7] exynos-sysmmu 13d50000.sysmmu: --> 13180000.fimc_is
<6>[ 0.478616] [c7] exynos-sysmmu 13d50000.sysmmu: [OK]
<6>[ 0.478767] [c7] exynos-sysmmu 13cc0000.sysmmu: No gating clock found.
<6>[ 0.478920] [c7] exynos-sysmmu 13cc0000.sysmmu: --> 13180000.fimc_is
<6>[ 0.478938] [c7] exynos-sysmmu 13cc0000.sysmmu: [OK]
<6>[ 0.479089] [c7] exynos-sysmmu 13cb0000.sysmmu: No gating clock found.
<6>[ 0.479241] [c7] exynos-sysmmu 13cb0000.sysmmu: --> 13180000.fimc_is
<6>[ 0.479259] [c7] exynos-sysmmu 13cb0000.sysmmu: [OK]
<6>[ 0.479589] [c7] exynos-sysmmu 10a60000.sysmmu: --> 10850000.fimg2d
<6>[ 0.479609] [c7] exynos-sysmmu 10a60000.sysmmu: [OK]
<6>[ 0.479946] [c7] exynos-sysmmu 10a70000.sysmmu: --> 10850000.fimg2d
<6>[ 0.479965] [c7] exynos-sysmmu 10a70000.sysmmu: [OK]
<6>[ 0.480291] [c7] exynos-sysmmu 14650000.sysmmu: --> 14450000.mixer
<6>[ 0.480311] [c7] exynos-sysmmu 14650000.sysmmu: [OK]
<6>[ 0.480464] [c7] exynos-sysmmu 13e80000.sysmmu: No gating clock found.
<6>[ 0.480598] [c7] exynos-sysmmu 13e80000.sysmmu: --> 13e00000.gsc
<6>[ 0.480616] [c7] exynos-sysmmu 13e80000.sysmmu: [OK]
<6>[ 0.480768] [c7] exynos-sysmmu 13e90000.sysmmu: No gating clock found.
<6>[ 0.480903] [c7] exynos-sysmmu 13e90000.sysmmu: --> 13e10000.gsc
<6>[ 0.480920] [c7] exynos-sysmmu 13e90000.sysmmu: [OK]
<6>[ 0.481256] [c7] exynos-sysmmu 132a0000.sysmmu: --> 13180000.fimc_is
<6>[ 0.481275] [c7] exynos-sysmmu 132a0000.sysmmu: [OK]
<6>[ 0.481607] [c7] exynos-sysmmu 132b0000.sysmmu: --> 13180000.fimc_is
<6>[ 0.481626] [c7] exynos-sysmmu 132b0000.sysmmu: [OK]
<6>[ 0.481957] [c7] exynos-sysmmu 13260000.sysmmu: --> 13180000.fimc_is
<6>[ 0.481977] [c7] exynos-sysmmu 13260000.sysmmu: [OK]
<6>[ 0.482348] [c7] exynos-sysmmu 13270000.sysmmu: --> 13180000.fimc_is
<6>[ 0.482369] [c7] exynos-sysmmu 13270000.sysmmu: [OK]
<6>[ 0.482717] [c7] exynos-sysmmu 13280000.sysmmu: --> 13180000.fimc_is
<6>[ 0.482736] [c7] exynos-sysmmu 13280000.sysmmu: [OK]
<6>[ 0.483066] [c7] exynos-sysmmu 13290000.sysmmu: --> 13180000.fimc_is
<6>[ 0.483085] [c7] exynos-sysmmu 13290000.sysmmu: [OK]
<6>[ 0.483415] [c7] exynos-sysmmu 132f0000.sysmmu: --> 13180000.fimc_is
<6>[ 0.483435] [c7] exynos-sysmmu 132f0000.sysmmu: [OK]
<6>[ 0.483762] [c7] exynos-sysmmu 12880000.sysmmu: --> 12800000.scaler
<6>[ 0.483782] [c7] exynos-sysmmu 12880000.sysmmu: [OK]
<6>[ 0.484116] [c7] exynos-sysmmu 12890000.sysmmu: --> 12810000.scaler
<6>[ 0.484136] [c7] exynos-sysmmu 12890000.sysmmu: [OK]
<6>[ 0.484466] [c7] exynos-sysmmu 128a0000.sysmmu: --> 12820000.scaler
<6>[ 0.484486] [c7] exynos-sysmmu 128a0000.sysmmu: [OK]
<6>[ 0.484814] [c7] exynos-sysmmu 128c0000.sysmmu: --> 12800000.scaler
<6>[ 0.484834] [c7] exynos-sysmmu 128c0000.sysmmu: [OK]
<6>[ 0.485175] [c7] exynos-sysmmu 128d0000.sysmmu: --> 12810000.scaler
<6>[ 0.485195] [c7] exynos-sysmmu 128d0000.sysmmu: [OK]
<6>[ 0.485529] [c7] exynos-sysmmu 128e0000.sysmmu: --> 12820000.scaler
<6>[ 0.485549] [c7] exynos-sysmmu 128e0000.sysmmu: [OK]
<6>[ 0.485872] [c7] exynos-sysmmu 11f10000.sysmmu: --> 11f50000.jpeg
<6>[ 0.485892] [c7] exynos-sysmmu 11f10000.sysmmu: [OK]
<6>[ 0.486214] [c7] exynos-sysmmu 11f20000.sysmmu: --> 11f60000.jpeg
<6>[ 0.486233] [c7] exynos-sysmmu 11f20000.sysmmu: [OK]
<6>[ 0.486548] [c7] exynos-sysmmu 11200000.sysmmu: --> 11000000.mfc
<6>[ 0.486568] [c7] exynos-sysmmu 11200000.sysmmu: [OK]
<6>[ 0.486888] [c7] exynos-sysmmu 11210000.sysmmu: --> 11000000.mfc
<6>[ 0.486907] [c7] exynos-sysmmu 11210000.sysmmu: [OK]
<6>[ 0.487225] [c7] exynos-sysmmu 14640000.sysmmu: --> 14400000.fimd_fb
<6>[ 0.487244] [c7] exynos-sysmmu 14640000.sysmmu: [OK]
<6>[ 0.487537] [c7] exynos-sysmmu 14680000.sysmmu: --> 14400000.fimd_fb
<6>[ 0.487557] [c7] exynos-sysmmu 14680000.sysmmu: [OK]
<6>[ 0.488087] [c7] Exynos5422 ASV : Use Fusing Speed Group 7
<3>[ 0.488103] [c7] Exynos5422 ASV : invalid IDS value
<6>[ 0.488118] [c7] EXYNOS5422 ASV : IDS : 0 HPM : 0
<6>[ 0.488138] [c7] VDD_ARM ASV group is 7
<6>[ 0.488158] [c7] VDD_ARM LV0 freq : 2100000 volt : 1275000 abb : 255
<6>[ 0.488174] [c7] VDD_ARM LV0 freq : 2100000 abb : 255
<6>[ 0.488189] [c7] VDD_ARM LV1 freq : 2000000 volt : 1237500 abb : 255
<6>[ 0.488203] [c7] VDD_ARM LV1 freq : 2000000 abb : 255
<6>[ 0.488218] [c7] VDD_ARM LV2 freq : 1900000 volt : 1162500 abb : 255
<6>[ 0.488233] [c7] VDD_ARM LV2 freq : 1900000 abb : 255
<6>[ 0.488247] [c7] VDD_ARM LV3 freq : 1800000 volt : 1112500 abb : 255
<6>[ 0.488262] [c7] VDD_ARM LV3 freq : 1800000 abb : 255
<6>[ 0.488276] [c7] VDD_ARM LV4 freq : 1700000 volt : 1075000 abb : 255
<6>[ 0.488290] [c7] VDD_ARM LV4 freq : 1700000 abb : 255
<6>[ 0.488305] [c7] VDD_ARM LV5 freq : 1600000 volt : 1037500 abb : 255
<6>[ 0.488319] [c7] VDD_ARM LV5 freq : 1600000 abb : 255
<6>[ 0.488333] [c7] VDD_ARM LV6 freq : 1500000 volt : 1000000 abb : 255
<6>[ 0.488347] [c7] VDD_ARM LV6 freq : 1500000 abb : 255
<6>[ 0.488362] [c7] VDD_ARM LV7 freq : 1400000 volt : 975000 abb : 255
<6>[ 0.488376] [c7] VDD_ARM LV7 freq : 1400000 abb : 255
<6>[ 0.488391] [c7] VDD_ARM LV8 freq : 1300000 volt : 962500 abb : 255
<6>[ 0.488405] [c7] VDD_ARM LV8 freq : 1300000 abb : 255
<6>[ 0.488419] [c7] VDD_ARM LV9 freq : 1200000 volt : 937500 abb : 255
<6>[ 0.488433] [c7] VDD_ARM LV9 freq : 1200000 abb : 255
<6>[ 0.488447] [c7] VDD_ARM LV10 freq : 1100000 volt : 912500 abb : 255
<6>[ 0.488462] [c7] VDD_ARM LV10 freq : 1100000 abb : 255
<6>[ 0.488476] [c7] VDD_ARM LV11 freq : 1000000 volt : 900000 abb : 255
<6>[ 0.488490] [c7] VDD_ARM LV11 freq : 1000000 abb : 255
<6>[ 0.488504] [c7] VDD_ARM LV12 freq : 900000 volt : 900000 abb : 255
<6>[ 0.488518] [c7] VDD_ARM LV12 freq : 900000 abb : 255
<6>[ 0.488532] [c7] VDD_ARM LV13 freq : 800000 volt : 900000 abb : 255
<6>[ 0.488546] [c7] VDD_ARM LV13 freq : 800000 abb : 255
<6>[ 0.488560] [c7] VDD_ARM LV14 freq : 700000 volt : 900000 abb : 255
<6>[ 0.488574] [c7] VDD_ARM LV14 freq : 700000 abb : 255
<6>[ 0.488588] [c7] VDD_ARM LV15 freq : 600000 volt : 900000 abb : 255
<6>[ 0.488601] [c7] VDD_ARM LV15 freq : 600000 abb : 255
<6>[ 0.488615] [c7] VDD_ARM LV16 freq : 500000 volt : 900000 abb : 255
<6>[ 0.488629] [c7] VDD_ARM LV16 freq : 500000 abb : 255
<6>[ 0.488644] [c7] VDD_ARM LV17 freq : 400000 volt : 900000 abb : 255
<6>[ 0.488657] [c7] VDD_ARM LV17 freq : 400000 abb : 255
<6>[ 0.488671] [c7] VDD_ARM LV18 freq : 300000 volt : 900000 abb : 255
<6>[ 0.488685] [c7] VDD_ARM LV18 freq : 300000 abb : 255
<6>[ 0.488699] [c7] VDD_ARM LV19 freq : 200000 volt : 900000 abb : 255
<6>[ 0.488713] [c7] VDD_ARM LV19 freq : 200000 abb : 255
<6>[ 0.488726] [c7] VDD_KFC ASV group is 7
<6>[ 0.488745] [c7] VDD_KFC LV0 freq : 1500000 volt : 1262500
<6>[ 0.488759] [c7] VDD_KFC LV0 freq : 1500000 abb : 255
<6>[ 0.488773] [c7] VDD_KFC LV1 freq : 1400000 volt : 1187500
<6>[ 0.488787] [c7] VDD_KFC LV1 freq : 1400000 abb : 255
<6>[ 0.488800] [c7] VDD_KFC LV2 freq : 1300000 volt : 1137500
<6>[ 0.488814] [c7] VDD_KFC LV2 freq : 1300000 abb : 255
<6>[ 0.488828] [c7] VDD_KFC LV3 freq : 1200000 volt : 1087500
<6>[ 0.488842] [c7] VDD_KFC LV3 freq : 1200000 abb : 255
<6>[ 0.488856] [c7] VDD_KFC LV4 freq : 1100000 volt : 1050000
<6>[ 0.488869] [c7] VDD_KFC LV4 freq : 1100000 abb : 255
<6>[ 0.488883] [c7] VDD_KFC LV5 freq : 1000000 volt : 1012500
<6>[ 0.488897] [c7] VDD_KFC LV5 freq : 1000000 abb : 255
<6>[ 0.488910] [c7] VDD_KFC LV6 freq : 900000 volt : 975000
<6>[ 0.488924] [c7] VDD_KFC LV6 freq : 900000 abb : 255
<6>[ 0.488938] [c7] VDD_KFC LV7 freq : 800000 volt : 937500
<6>[ 0.488952] [c7] VDD_KFC LV7 freq : 800000 abb : 255
<6>[ 0.488965] [c7] VDD_KFC LV8 freq : 700000 volt : 900000
<6>[ 0.488979] [c7] VDD_KFC LV8 freq : 700000 abb : 255
<6>[ 0.488993] [c7] VDD_KFC LV9 freq : 600000 volt : 900000
<6>[ 0.489006] [c7] VDD_KFC LV9 freq : 600000 abb : 255
<6>[ 0.489020] [c7] VDD_KFC LV10 freq : 500000 volt : 900000
<6>[ 0.489034] [c7] VDD_KFC LV10 freq : 500000 abb : 255
<6>[ 0.489047] [c7] VDD_KFC LV11 freq : 400000 volt : 900000
<6>[ 0.489061] [c7] VDD_KFC LV11 freq : 400000 abb : 255
<6>[ 0.489075] [c7] VDD_KFC LV12 freq : 300000 volt : 900000
<6>[ 0.489088] [c7] VDD_KFC LV12 freq : 300000 abb : 255
<6>[ 0.489102] [c7] VDD_KFC LV13 freq : 200000 volt : 900000
<6>[ 0.489116] [c7] VDD_KFC LV13 freq : 200000 abb : 255
<6>[ 0.489129] [c7] VDD_INT ASV group is 7
<6>[ 0.489150] [c7] VDD_INT LV0 freq : 600000 volt : 912500
<6>[ 0.489164] [c7] VDD_INT LV0 freq : 600000 abb : 255
<6>[ 0.489178] [c7] VDD_INT LV1 freq : 500000 volt : 900000
<6>[ 0.489192] [c7] VDD_INT LV1 freq : 500000 abb : 255
<6>[ 0.489206] [c7] VDD_INT LV2 freq : 480000 volt : 900000
<6>[ 0.489219] [c7] VDD_INT LV2 freq : 480000 abb : 255
<6>[ 0.489233] [c7] VDD_INT LV3 freq : 460000 volt : 900000
<6>[ 0.489247] [c7] VDD_INT LV3 freq : 460000 abb : 255
<6>[ 0.489260] [c7] VDD_INT LV4 freq : 440000 volt : 900000
<6>[ 0.489274] [c7] VDD_INT LV4 freq : 440000 abb : 255
<6>[ 0.489288] [c7] VDD_INT LV5 freq : 420000 volt : 900000
<6>[ 0.489302] [c7] VDD_INT LV5 freq : 420000 abb : 255
<6>[ 0.489316] [c7] VDD_INT LV6 freq : 400000 volt : 862500
<6>[ 0.489329] [c7] VDD_INT LV6 freq : 400000 abb : 255
<6>[ 0.489343] [c7] VDD_INT LV7 freq : 333000 volt : 862500
<6>[ 0.489356] [c7] VDD_INT LV7 freq : 333000 abb : 255
<6>[ 0.489370] [c7] VDD_INT LV8 freq : 222000 volt : 862500
<6>[ 0.489384] [c7] VDD_INT LV8 freq : 222000 abb : 14
<6>[ 0.489397] [c7] VDD_INT LV9 freq : 111000 volt : 862500
<6>[ 0.489411] [c7] VDD_INT LV9 freq : 111000 abb : 14
<6>[ 0.489425] [c7] VDD_INT LV10 freq : 83000 volt : 862500
<6>[ 0.489439] [c7] VDD_INT LV10 freq : 83000 abb : 14
<6>[ 0.489453] [c7] VDD_MIF ASV group is 7
<6>[ 0.489469] [c7] VDD_MIF LV0 freq : 825000 volt : 887500
<6>[ 0.489483] [c7] VDD_MIF LV0 freq : 825000 abb : 14
<6>[ 0.489497] [c7] VDD_MIF LV1 freq : 728000 volt : 837500
<6>[ 0.489511] [c7] VDD_MIF LV1 freq : 728000 abb : 14
<6>[ 0.489525] [c7] VDD_MIF LV2 freq : 633000 volt : 800000
<6>[ 0.489538] [c7] VDD_MIF LV2 freq : 633000 abb : 14
<6>[ 0.489552] [c7] VDD_MIF LV3 freq : 543000 volt : 775000
<6>[ 0.489566] [c7] VDD_MIF LV3 freq : 543000 abb : 14
<6>[ 0.489580] [c7] VDD_MIF LV4 freq : 413000 volt : 737500
<6>[ 0.489593] [c7] VDD_MIF LV4 freq : 413000 abb : 14
<6>[ 0.489607] [c7] VDD_MIF LV5 freq : 275000 volt : 737500
<6>[ 0.489621] [c7] VDD_MIF LV5 freq : 275000 abb : 14
<6>[ 0.489635] [c7] VDD_MIF LV6 freq : 206000 volt : 737500
<6>[ 0.489648] [c7] VDD_MIF LV6 freq : 206000 abb : 14
<6>[ 0.489662] [c7] VDD_MIF LV7 freq : 165000 volt : 737500
<6>[ 0.489676] [c7] VDD_MIF LV7 freq : 165000 abb : 14
<6>[ 0.489689] [c7] VDD_MIF LV8 freq : 138000 volt : 737500
<6>[ 0.489703] [c7] VDD_MIF LV8 freq : 138000 abb : 14
<6>[ 0.489717] [c7] VDD_MIF LV9 freq : 69000 volt : 725000
<6>[ 0.489731] [c7] VDD_MIF LV9 freq : 69000 abb : 0
<6>[ 0.489744] [c7] VDD_G3D ASV group is 7
<6>[ 0.489760] [c7] VDD_G3D LV0 freq : 543000 volt : 912500
<6>[ 0.489774] [c7] VDD_G3D LV0 freq : 543000 abb : 255
<6>[ 0.489788] [c7] VDD_G3D LV1 freq : 480000 volt : 862500
<6>[ 0.489802] [c7] VDD_G3D LV1 freq : 480000 abb : 255
<6>[ 0.489816] [c7] VDD_G3D LV2 freq : 420000 volt : 825000
<6>[ 0.489830] [c7] VDD_G3D LV2 freq : 420000 abb : 255
<6>[ 0.489844] [c7] VDD_G3D LV3 freq : 350000 volt : 800000
<6>[ 0.489857] [c7] VDD_G3D LV3 freq : 350000 abb : 255
<6>[ 0.489871] [c7] VDD_G3D LV4 freq : 260000 volt : 775000
<6>[ 0.489885] [c7] VDD_G3D LV4 freq : 260000 abb : 255
<6>[ 0.489899] [c7] VDD_G3D LV5 freq : 177000 volt : 725000
<6>[ 0.489913] [c7] VDD_G3D LV5 freq : 177000 abb : 255
<6>[ 0.489926] [c7] VDD_G3D LV6 freq : 100000 volt : 725000
<6>[ 0.489940] [c7] VDD_G3D LV6 freq : 100000 abb : 255
<6>[ 0.489954] [c7] VDD_ISP ASV group is 7
<6>[ 0.489969] [c7] VDD_ISP LV0 freq : 666000 volt : 925000
<6>[ 0.489983] [c7] VDD_ISP LV1 freq : 555000 volt : 925000
<6>[ 0.489997] [c7] VDD_ISP LV2 freq : 444000 volt : 925000
<6>[ 0.490011] [c7] VDD_ISP LV3 freq : 333000 volt : 875000
<6>[ 0.490025] [c7] VDD_ISP LV4 freq : 222000 volt : 875000
<6>[ 0.490039] [c7] VDD_ISP LV5 freq : 111000 volt : 875000
<6>[ 0.490052] [c7] VDD_ISP LV6 freq : 100000 volt : 875000
<6>[ 0.538663] [c5] bio: create slab <bio-0> at 0
<7>[ 0.540039] [c6] of_get_named_gpio_flags exited with status 98
<6>[ 0.540357] [c6] tsp_avdd_en: 3300 mV
<6>[ 0.542902] [c7] max77804:max77804_i2c_init
<5>[ 0.544022] [c7] SCSI subsystem initialized
<4>[ 0.544514] [c7] s3c64xx-spi 12d20000.spi: spi bus clock parent not specified, using clock at index 0 as parent
<4>[ 0.544536] [c7] s3c64xx-spi 12d20000.spi: number of chip select lines not specified, assuming 1 chip select line
<6>[ 0.544686] [c7] s3c64xx-spi 12d20000.spi: Not use idle state.
<7>[ 0.545159] [c4] of_get_named_gpio_flags exited with status 186
<4>[ 0.545607] [c4] s3c64xx-spi 12d30000.spi: spi bus clock parent not specified, using clock at index 0 as parent
<4>[ 0.545630] [c4] s3c64xx-spi 12d30000.spi: number of chip select lines not specified, assuming 1 chip select line
<6>[ 0.545755] [c4] s3c64xx-spi 12d30000.spi: Not use idle state.
<7>[ 0.546180] [c4] of_get_named_gpio_flags exited with status 190
<4>[ 0.546621] [c4] s3c64xx-spi 12d40000.spi: spi bus clock parent not specified, using clock at index 0 as parent
<4>[ 0.546643] [c4] s3c64xx-spi 12d40000.spi: number of chip select lines not specified, assuming 1 chip select line
<6>[ 0.546759] [c4] s3c64xx-spi 12d40000.spi: Not use idle state.
<7>[ 0.547285] [c4] of_get_named_gpio_flags exited with status 200
<6>[ 0.547940] [c4] PM DOMAIN: pd-isp, Device : 131a0000.spi Registered
<4>[ 0.547980] [c4] s3c64xx-spi 131a0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
<6>[ 0.548102] [c4] s3c64xx-spi 131a0000.spi: Not use idle state.
<7>[ 0.548514] [c4] of_get_named_gpio_flags exited with status 131
<7>[ 0.548802] [c4] of_get_named_gpio_flags exited with status 142
<3>[ 0.549177] [c4] samsung-pinctrl 14000000.pinctrl: pin gpf1-7 already requested by 14000000.pinctrl; cannot claim for 131b0000.spi
<3>[ 0.549199] [c4] samsung-pinctrl 14000000.pinctrl: pin-148 (131b0000.spi) status -22
<3>[ 0.549218] [c4] samsung-pinctrl 14000000.pinctrl: could not request pin 148 on device samsung-pinctrl
<3>[ 0.549236] [c4] s3c64xx-spi 131b0000.spi: Error applying setting, reverse things back
<4>[ 0.550733] [c0] pd-isp: Power-off latency exceeded, new value 5000000 ns
<6>[ 0.550800] [c4] PM DOMAIN: pd-isp, Device : 131b0000.spi Registered
<4>[ 0.550839] [c4] s3c64xx-spi 131b0000.spi: spi bus clock parent not specified, using clock at index 0 as parent
<4>[ 0.550860] [c4] s3c64xx-spi 131b0000.spi: number of chip select lines not specified, assuming 1 chip select line
<4>[ 0.555725] [c0] pd-cam: Power-off latency exceeded, new value 5000000 ns
<4>[ 0.563546] [c4] pd-cam: Power-on latency exceeded, new value 5000000 ns
<4>[ 0.567203] [c4] pd-isp: Power-on latency exceeded, new value 5000000 ns
<6>[ 0.567330] [c4] s3c64xx-spi 131b0000.spi: Not use idle state.
<6>[ 0.569077] [c4] usbcore: registered new interface driver usbfs
<6>[ 0.569277] [c4] usbcore: registered new interface driver hub
<6>[ 0.569551] [c4] usbcore: registered new device driver usb
<6>[ 0.574181] [c4] vdd_mif: 700 <--> 1300 mV at 1000 mV
<6>[ 0.575128] [c4] vdd_eagle: 800 <--> 1500 mV at 1000 mV
<6>[ 0.576062] [c4] vdd_int: 800 <--> 1400 mV at 1025 mV
<6>[ 0.577005] [c4] vdd_g3d: 700 <--> 1400 mV at 1000 mV
<6>[ 0.577992] [c4] vdd_kfc: 800 <--> 1500 mV at 1025 mV
<6>[ 0.578929] [c4] vdd_cam_isp_1.0v: 750 <--> 1500 mV at 912 mV
<6>[ 0.579986] [c4] vdd_ldo6: 1000 mV
<6>[ 0.581033] [c4] vdd_ldo7: 1800 mV
<6>[ 0.581843] [c4] vqmmc: 1800 <--> 3300 mV at 2800 mV
<6>[ 0.582917] [c4] vcc_3.0v_motor: 3000 mV
<6>[ 0.583745] [c4] VT_CAM_2.8V: 2800 mV
<6>[ 0.584766] [c4] IR_3.3V_AP: 3300 mV
<6>[ 0.585808] [c4] vdd_ldo18: 1800 mV
<6>[ 0.586720] [c4] vmmc: 1800 <--> 2850 mV at 2800 mV
<6>[ 0.587554] [c4] VT_CAM_1.8V: 1800 mV
<6>[ 0.588375] [c4] CAM_IO_1.8V_AP: 1800 mV
<6>[ 0.589201] [c4] CAM_SEN_CORE_1.2V_AP: 1200 mV
<6>[ 0.590014] [c4] vdd_mifs: 800 <--> 1100 mV at 1000 mV
<6>[ 0.590834] [c4] VCC_3.3V_MHL: 3300 mV
<6>[ 0.591890] [c4] vdd_ldo25: 1800 mV
<6>[ 0.592749] [c4] CAM_AF_2.8V_AP: 2800 mV
<6>[ 0.593568] [c4] vdd_g3ds: 800 <--> 1100 mV at 1000 mV
<6>[ 0.594632] [c4] vdd_ldo28: 3000 mV
<6>[ 0.595451] [c4] vtouch_1.8v: 1800 mV
<6>[ 0.596273] [c4] VDDA_1.8V_COMP: 1800 mV
<6>[ 0.597091] [c4] tsp_io: 1800 mV
<6>[ 0.597928] [c4] VCC_1.8V_MHL: 1800 mV
<6>[ 0.598764] [c4] HRM_3.3V_AP: 3300 mV
<6>[ 0.599586] [c4] VSIL_1.2A: 1200 mV
<6>[ 0.600401] [c4] vtouch_3.3v: 3300 mV
<6>[ 0.601219] [c4] HRM_1.8V_AP: 1800 mV
<6>[ 0.603099] [c4] max77804:max77804_i2c_probe
<7>[ 0.603126] [c4] of_get_named_gpio_flags exited with status 20
<6>[ 0.603147] [c4] of_max77804_dt: irq-gpio: 20 irqf-trigger:2)
<6>[ 0.603591] [c4] max77804:max77804_i2c_probe device found: rev.0x3, ver.0x0
<6>[ 0.604476] [c4] max77804:max77804k_irq_init irq=552, irq->gpio=20
<6>[ 0.617832] [c4] max77804:max77804k_irq_init max77804_PMIC_REG_INTSRC_MASK=0xf6
<6>[ 0.618997] [c4] max77804-safeout max77804-safeout: max77804_pmic_probe
<6>[ 0.619057] [c4] [drivers/regulator/max77804.c:591] pdata->num_regulators:2
<6>[ 0.619073] [c4] [drivers/regulator/max77804.c:598] for in pdata->num_regulators:2
<6>[ 0.619333] [c4] regulator regulator.33: func:max77804_get_rid
<6>[ 0.619353] [c4] regulator regulator.33: func:max77804_list_voltage_safeout
<6>[ 0.619370] [c4] regulator regulator.33: func:max77804_get_rid
<6>[ 0.619387] [c4] regulator regulator.33: func:max77804_list_voltage_safeout
<6>[ 0.619403] [c4] regulator regulator.33: func:max77804_get_rid
<6>[ 0.619419] [c4] regulator regulator.33: func:max77804_list_voltage_safeout
<6>[ 0.619436] [c4] regulator regulator.33: func:max77804_get_rid
<6>[ 0.619452] [c4] regulator regulator.33: func:max77804_list_voltage_safeout
<6>[ 0.619469] [c4] regulator regulator.33: func:max77804_reg_enable
<6>[ 0.619486] [c4] regulator regulator.33: func:max77804_get_rid
<6>[ 0.619502] [c4] regulator regulator.33: func:max77804_get_enable_register
<6>[ 0.620069] [c4] max77804_regulator_update_reg: reg(0xc6): [0x45]+[0x40]:[mask 0x40]->[0x45]
<6>[ 0.620089] [c4] regulator regulator.33: func:max77804_get_voltage
<6>[ 0.620105] [c4] regulator regulator.33: func:max77804_get_rid
<6>[ 0.620121] [c4] regulator regulator.33: func:max77804_get_voltage_register
<6>[ 0.620282] [c4] regulator regulator.33: func:max77804_get_rid
<6>[ 0.620299] [c4] regulator regulator.33: func:max77804_list_voltage_safeout
<6>[ 0.620315] [c4] safeout1_range: 3300 <--> 4900 mV at 4900 mV
<6>[ 0.620331] [c4] regulator regulator.33: func:max77804_get_voltage
<6>[ 0.620347] [c4] regulator regulator.33: func:max77804_get_rid
<6>[ 0.620363] [c4] regulator regulator.33: func:max77804_get_voltage_register
<6>[ 0.620524] [c4] regulator regulator.33: func:max77804_get_rid
<6>[ 0.620541] [c4] regulator regulator.33: func:max77804_list_voltage_safeout
<6>[ 0.620643] [c4] [drivers/regulator/max77804.c:598] for in pdata->num_regulators:2
<6>[ 0.620894] [c4] regulator regulator.34: func:max77804_get_rid
<6>[ 0.620913] [c4] regulator regulator.34: func:max77804_list_voltage_safeout
<6>[ 0.620930] [c4] regulator regulator.34: func:max77804_get_rid
<6>[ 0.620946] [c4] regulator regulator.34: func:max77804_list_voltage_safeout
<6>[ 0.620963] [c4] regulator regulator.34: func:max77804_get_rid
<6>[ 0.620979] [c4] regulator regulator.34: func:max77804_list_voltage_safeout
<6>[ 0.620995] [c4] regulator regulator.34: func:max77804_get_rid
<6>[ 0.621011] [c4] regulator regulator.34: func:max77804_list_voltage_safeout
<6>[ 0.621030] [c4] regulator regulator.34: func:max77804_get_voltage
<6>[ 0.621046] [c4] regulator regulator.34: func:max77804_get_rid
<6>[ 0.621063] [c4] regulator regulator.34: func:max77804_get_voltage_register
<6>[ 0.621225] [c4] regulator regulator.34: func:max77804_get_rid
<6>[ 0.621242] [c4] regulator regulator.34: func:max77804_list_voltage_safeout
<6>[ 0.621257] [c4] safeout2_range: 3300 <--> 4900 mV at 4900 mV
<6>[ 0.621273] [c4] regulator regulator.34: func:max77804_get_voltage
<6>[ 0.621289] [c4] regulator regulator.34: func:max77804_get_rid
<6>[ 0.621305] [c4] regulator regulator.34: func:max77804_get_voltage_register
<6>[ 0.621465] [c4] regulator regulator.34: func:max77804_get_rid
<6>[ 0.621482] [c4] regulator regulator.34: func:max77804_list_voltage_safeout
<7>[ 0.624397] [c4] of_get_named_gpio_flags exited with status 73
<7>[ 0.624423] [c4] of_get_named_gpio_flags exited with status 74
<6>[ 0.624996] [c4] i2c-gpio i2c.9: using pins 73 (SDA) and 74 (SCL)
<7>[ 0.625076] [c4] of_get_named_gpio_flags exited with status 99
<7>[ 0.625100] [c4] of_get_named_gpio_flags exited with status 100
<6>[ 0.625613] [c4] i2c-gpio i2c.10: using pins 99 (SDA) and 100 (SCL)
<7>[ 0.625714] [c4] of_get_named_gpio_flags exited with status 198
<7>[ 0.625751] [c4] of_get_named_gpio_flags exited with status 221
<6>[ 0.626286] [c4] i2c-gpio i2c.11: using pins 198 (SDA) and 221 (SCL)
<7>[ 0.626378] [c4] of_get_named_gpio_flags exited with status 154
<7>[ 0.626407] [c4] of_get_named_gpio_flags exited with status 153
<6>[ 0.626940] [c4] i2c-gpio i2c.12: using pins 154 (SDA) and 153 (SCL)
<7>[ 0.627072] [c4] of_get_named_gpio_flags exited with status 196
<7>[ 0.627109] [c4] of_get_named_gpio_flags exited with status 197
<6>[ 0.627654] [c4] i2c-gpio i2c.27: using pins 196 (SDA) and 197 (SCL)
<6>[ 0.628884] [c4] s3c-i2c 12c60000.i2c: i2c-8: S3C I2C adapter
<6>[ 0.629620] [c4] s3c-i2c 12c70000.i2c: i2c-9: S3C I2C adapter
<6>[ 0.630677] [c4] s3c-i2c 12c90000.i2c: i2c-10: S3C I2C adapter
<6>[ 0.631668] [c4] s3c-i2c 13130000.i2c: i2c-11: S3C I2C adapter
<6>[ 0.631997] [c4] media: Linux media interface: v0.10
<6>[ 0.632242] [c4] Linux video capture interface: v2.00
<6>[ 0.633818] [c5] IOVMM: Created debugfs entry at debugfs/iovmm
<6>[ 0.633852] [c5] IOMMU: Created debugfs entry at debugfs/iommu
<6>[ 0.634402] [c6] fingerprint_class_init
<6>[ 0.634607] [c6] [SENSORS CORE] sensors_class_init
<6>[ 0.635160] [c6] [SENSORS CORE] sensors_class_init succcess
<6>[ 0.635387] [c6] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.635934] [c6] PM DOMAIN: pd-maudio, Device : 3810000.lpass Registered
<6>[ 0.635965] [c6] Samsung Low Power Audio Subsystem driver, (c)2013 Samsung Electronics
<6>[ 0.638186] [c6] Bluetooth: Core ver 2.16
<6>[ 0.638387] [c6] NET: Registered protocol family 31
<6>[ 0.638405] [c6] Bluetooth: HCI device and connection manager initialized
<6>[ 0.638431] [c6] Bluetooth: HCI socket layer initialized
<6>[ 0.638454] [c6] Bluetooth: L2CAP socket layer initialized
<6>[ 0.638511] [c6] Bluetooth: SCO socket layer initialized
<4>[ 0.639191] [c6] regulatory is not upadted via queue_regulatory_request.
<6>[ 0.639805] [c6] nfc: nfc_init: NFC Core ver 0.1
<6>[ 0.640037] [c6] NET: Registered protocol family 39
<6>[ 0.642845] [c6] Switching to clocksource mct-frc
<6>[ 0.703314] [c6] NET: Registered protocol family 2
<6>[ 0.704070] [c6] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.704248] [c6] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.704411] [c6] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.704475] [c6] TCP: reno registered
<6>[ 0.704497] [c6] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.704542] [c6] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.704857] [c6] NET: Registered protocol family 1
<6>[ 0.705168] [c6] Trying to unpack rootfs image as initramfs...
<6>[ 0.818978] [c7] Freeing initrd memory: 2084K (c2000000 - c2209000)
<6>[ 0.820093] [c5] FIPS: self-tests for aes-asm (aes) passed
<6>[ 0.820349] [c5] FIPS: self-tests for sha1-asm (sha1) passed
<6>[ 0.822645] [c7] audit: initializing netlink socket (enabled)
<4>[ 0.823541] [c7] bounce pool size: 64 pages
<6>[ 0.841476] [c7] ROMFS MTD (C) 2007 Red Hat, Inc.
<6>[ 0.841764] [c7] fuse init (API version 7.22)
<6>[ 0.842659] [c7] Registering sdcardfs 2.1.1
<6>[ 0.843019] [c7] exFAT: Core Version 1.2.11
<6>[ 0.843036] [c7] exFAT: FS Version 1.2.11
<6>[ 0.843345] [c7] msgmni has been set to 1408
<7>[ 0.843416] [c7] SELinux: Registering netfilter hooks
<1>[ 0.844395] [c7] tima_uevent_init
<7>[ 0.844837] [c7] TIMA uevent driver (tima_uevent) is initialized.
<4>[ 0.846153] [c7] dek: initialized
<4>[ 0.846176] [c7] SDP_MM: entering************************************************
<6>[ 0.847046] [c5] FIPS: self-tests for non-FIPS cipher_null-generic (cipher_null) passed
<6>[ 0.847203] [c5] FIPS: self-tests for non-FIPS ecb-cipher_null (ecb(cipher_null)) passed
<6>[ 0.847357] [c5] FIPS: self-tests for non-FIPS compress_null-generic (compress_null) passed
<6>[ 0.847511] [c5] FIPS: self-tests for non-FIPS digest_null-generic (digest_null) passed
<6>[ 0.847663] [c5] FIPS: self-tests for non-FIPS md5-generic (md5) passed
<6>[ 0.847893] [c5] FIPS: self-tests for sha1-generic (sha1) passed
<6>[ 0.848152] [c5] FIPS: self-tests for sha256-generic (sha256) passed
<6>[ 0.848365] [c5] FIPS: self-tests for sha224-generic (sha224) passed
<6>[ 0.848681] [c5] FIPS: self-tests for sha512-generic (sha512) passed
<6>[ 0.848992] [c5] FIPS: self-tests for sha384-generic (sha384) passed
<6>[ 0.849226] [c5] FIPS: self-tests for des-generic (des) passed
<6>[ 0.849443] [c5] FIPS: self-tests for des3_ede-generic (des3_ede) passed
<6>[ 0.849598] [c5] FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
<6>[ 0.849820] [c5] FIPS: self-tests for aes-generic (aes) passed
<6>[ 0.849973] [c5] FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
<6>[ 0.850126] [c5] FIPS: self-tests for non-FIPS ecb(arc4)-generic (ecb(arc4)) passed
<6>[ 0.850827] [c5] FIPS: self-tests for deflate-generic (deflate) passed
<6>[ 0.851096] [c5] FIPS: self-tests for crc32c-generic (crc32c) passed
<6>[ 0.851309] [c5] FIPS: self-tests for lzo-generic (lzo) passed
<6>[ 0.851462] [c5] FIPS: No test for stdrng (krng)
<6>[ 0.874817] [c5] FIPS: self-tests for ansi_cprng (stdrng) passed
<6>[ 0.875001] [c5] FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
<3>[ 0.875081] [c7] FIPS : Tcrypt Tests Start
<6>[ 0.875790] [c5] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[ 0.876332] [c7] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[ 0.877301] [c5] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[ 0.877823] [c7] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[ 0.878519] [c5] FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
<6>[ 0.878947] [c7] FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
<6>[ 0.879849] [c5] FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
<6>[ 0.880313] [c7] FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
<6>[ 0.881575] [c5] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
<6>[ 0.882634] [c7] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
<6>[ 0.884241] [c5] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
<6>[ 0.885355] [c7] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
<6>[ 0.885449] [c7] FIPS: self-tests for sha1-generic (sha1) passed
<6>[ 0.885526] [c7] FIPS: self-tests for sha224-generic (sha224) passed
<6>[ 0.885597] [c7] FIPS: self-tests for sha256-generic (sha256) passed
<6>[ 0.885772] [c7] FIPS: self-tests for sha384-generic (sha384) passed
<6>[ 0.885940] [c7] FIPS: self-tests for sha512-generic (sha512) passed
<6>[ 0.886024] [c7] FIPS: self-tests for sha1-asm (sha1) passed
<6>[ 0.886492] [c5] FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
<6>[ 0.886744] [c7] FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
<6>[ 0.887226] [c5] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[ 0.887489] [c7] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[ 0.887992] [c5] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[ 0.888253] [c7] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[ 0.888845] [c5] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[ 0.889228] [c7] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[ 0.890006] [c5] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[ 0.890575] [c7] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[ 0.891347] [c5] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[ 0.891909] [c7] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[ 0.914374] [c7] FIPS: self-tests for fips_ansi_cprng (ansi_cprng) passed
<3>[ 0.914390] [c7] FIPS : Tcrypt Tests End
<6>[ 1.126634] [c7] FIPS: Integrity Check Passed
<3>[ 1.126650] tcrypt: CRYPTO API started in FIPS mode!!!
<6>[ 1.126892] [c5] FIPS: self-tests for ghash-generic (ghash) passed
<6>[ 1.126976] [c7] io scheduler noop registered
<6>[ 1.126995] [c7] io scheduler deadline registered
<6>[ 1.127364] [c7] io scheduler cfq registered (default)
<6>[ 1.128034] [c7] [GPIO_DVS] gpio nr:232
<6>[ 1.129569] [c7] [MHL] sii8240_init was called
<7>[ 1.129764] of_get_named_gpio_flags exited with status 170
<6>[ 1.129780] [c7] sii8240: gpio: mhl_reset = 170
<7>[ 1.129817] [c7] of_get_named_gpio_flags exited with status 216
<6>[ 1.129831] [c7] sii8240: gpio: mhl_scl = 216
<7>[ 1.129859] [c7] of_get_named_gpio_flags exited with status 215
<6>[ 1.129873] [c7] sii8240: gpio: mhl_sda = 215
<6>[ 1.129888] [c7] sii8240: swing_level = 0x2D
<6>[ 1.129987] [c7] sii8240: charger_name = sec-charger
<6>[ 1.131275] [c7] input: sii8240_rcp as /devices/virtual/input/input0
<6>[ 1.131751] [c7] ***MHL probe is successful
<6>[ 1.134662] [c7] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208
<6>[ 1.134686] [c7] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
<6>[ 1.143395] [c7] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208
<6>[ 1.143419] [c7] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>[ 1.151983] [c7] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208
<6>[ 1.152007] [c7] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
<6>[ 1.156525] [c7] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-2364208
<6>[ 1.156548] [c7] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
<6>[ 1.333014] [c7] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 1.335986] [c7] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
<6>[ 1.336804] [c7] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
<3>[ 1.337393] [c7] samsung-pinctrl 14010000.pinctrl: pin gpa1-3 already requested by 12c90000.i2c; cannot claim for 12c20000.serial
<3>[ 1.337416] [c7] samsung-pinctrl 14010000.pinctrl: pin-182 (12c20000.serial) status -22
<3>[ 1.337436] [c7] samsung-pinctrl 14010000.pinctrl: could not request pin 182 on device samsung-pinctrl
<3>[ 1.337455] [c7] samsung-uart 12c20000.serial: Error applying setting, reverse things back
<6>[ 1.337571] [c7] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
<6>[ 1.338271] [c7] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
<6>[ 1.342138] [c7] PM DOMAIN: pd-g3d, Device : 11800000.mali Registered
<6>[ 1.345761] [c7] mali 11800000.mali: Probed as mali0
<6>[ 1.346619] [c7] GPU_SYSFS ----------- gpu_sysfs_init -- 229
<6>[ 1.347157] GPU_SYSFS ----------- gpu_sysfs_probe -- 158GPU_SYSFS ----------- gpu_sysfs_device_init -- 144
<6>[ 1.347183] GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 29GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 115
<6>[ 1.347252] GPU_SYSFS ----------- gpu_sysfs_probe -- 178GPU_SYSFS ----------- gpu_sysfs_init -- 255
<6>[ 1.347481] muic_notifier_init
<6>[ 1.347743] [c7] muic-max77804k:max77804k_muic_init
<6>[ 1.348029] [c7] muic-max77804k:max77804k_muic_probe
<6>[ 1.348147] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[0] is MHL
<6>[ 1.348166] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[1] is OTG
<6>[ 1.348182] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[2] is Jig USB On
<6>[ 1.348199] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[3] is Jig UART Off
<6>[ 1.348217] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[4] is Jig UART Off + VB
<6>[ 1.348234] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[5] is Jig UART On
<6>[ 1.348252] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[6] is TA
<6>[ 1.348269] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[7] is USB
<6>[ 1.348286] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[8] is CDP
<6>[ 1.348303] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[9] is Unofficial
<6>[ 1.348320] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[10] is Fuelgauge test
<6>[ 1.348337] [c7] muic-max77804k:of_max77804k_muic_dt prop_support_list[11] is Charging Cable
<6>[ 1.348353] [c7] muic_init_gpio_cb (3)
<6>[ 1.348368] [c7] muic_init_gpio_cb: usb_path(PDA), uart_path(AP), rustproof(F)
<6>[ 1.348669] [c7] muic_notifier_register: listener=0 register
<6>[ 1.348685] [c7] muic_handle_dock_notification: ignore(51)
<6>[ 1.348700] [c7] muic_init_switch_dev_cb: done
<6>[ 1.348714] [c7] muic-max77804k:max77804k_muic_init_regs
<6>[ 1.348885] [c7] muic-max77804k:max77804k_muic_update_reg REG(0x16): already [0xb2], don't write reg
<6>[ 1.348900] [c7] muic-max77804k:max77804k_muic_irq_init
<6>[ 1.352193] [c7] muic-max77804k:max77804k_muic_irq_init adc1k(546), adcerr(545), adc(544), chgtyp(547), vbvolt(551)
<6>[ 1.352210] [c7] muic-max77804k:max77804k_muic_init_detect
<6>[ 1.352400] [c7] muic-max77804k:max77804k_muic_detect_dev STATUS1:0x3f, 2:0x41
<6>[ 1.352419] [c7] muic-max77804k:max77804k_muic_detect_dev adc1k:0x0 adcerr:0x0[F] adc:0x1f vb:0x40 chgdetrun:0x0 chgtyp:0x1
<6>[ 1.352436] [c7] muic-max77804k:muic_check_vps_adc vps(TA) adc(0x1f) ret(1)
<6>[ 1.352452] [c7] muic-max77804k:muic_check_vps_vbvolt vps(TA) vbvolt(0x40) ret(1)
<6>[ 1.352467] [c7] muic-max77804k:muic_check_vps_chgdetrun vps(TA) chgdetrun(0x00) ret(1)
<6>[ 1.352483] [c7] muic-max77804k:muic_check_vps_adc vps(USB) adc(0x1f) ret(1)
<6>[ 1.352498] [c7] muic-max77804k:muic_check_vps_vbvolt vps(USB) vbvolt(0x40) ret(1)
<6>[ 1.352513] [c7] muic-max77804k:muic_check_vps_chgdetrun vps(USB) chgdetrun(0x00) ret(1)
<6>[ 1.352528] [c7] muic-max77804k:muic_check_vps_chgtyp vps(USB) chgtyp(0x01) ret(1)
<6>[ 1.352543] [c7] muic-max77804k:muic_check_support_dev [T]
<6>[ 1.352557] [c7] muic-max77804k:max77804k_muic_detect_dev vps table match found at i(8), USB
<6>[ 1.352572] [c7] muic-max77804k:max77804k_muic_detect_dev 51->1
<6>[ 1.352587] [c7] muic-max77804k:is_need_muic_adcmode_continuous (1)F
<6>[ 1.352601] [c7] muic-max77804k:is_need_muic_adcmode_2s_pulse ADC:0x1f (F)
<6>[ 1.352767] [c7] muic-max77804k:max77804k_muic_adcmode_switch ADC Mode is already One Shot + Low lp Disconnect Detect(2), just return
<6>[ 1.352782] [c7] muic-max77804k:max77804k_muic_detect_dev ATTACHED
<6>[ 1.352798] [c7] muic-max77804k:max77804k_muic_logically_detach attached(51)!=new(1), assume detach
<6>[ 1.352813] [c7] muic_notifier_detach_attached_dev: (51)
<6>[ 1.352827] [c7] muic_notifier_notify: CMD=0, DATA=51
<6>[ 1.352842] [c7] muic_handle_dock_notification: ignore(51)
<6>[ 1.352857] [c7] muic_notifier_notify: notify done(0x0)
<6>[ 1.353033] [c7] muic-max77804k:max77804k_muic_update_reg REG(0x0d): already [0x3a], don't write reg
<6>[ 1.353200] [c7] muic-max77804k:max77804k_muic_update_reg REG(0x0c): already [0x00], don't write reg
<6>[ 1.353216] [c7] muic-max77804k:max77804k_muic_attach_usb_path usb_path=0
<6>[ 1.353648] [c7] muic-max77804k:max77804k_muic_update_reg REG(0x0c): [0x00]+[0x09:0xff]=[0x09]
<6>[ 1.353663] [c7] muic_set_safeout:MUIC safeout path=0
<6>[ 1.353753] [c7] regulator regulator.33: func:max77804_reg_is_enabled
<6>[ 1.353772] [c7] regulator regulator.33: func:max77804_get_rid
<6>[ 1.353788] [c7] regulator regulator.33: func:max77804_get_enable_register
<6>[ 1.354109] [c7] regulator regulator.34: func:max77804_reg_is_enabled
<6>[ 1.354127] [c7] regulator regulator.34: func:max77804_get_rid
<6>[ 1.354144] [c7] regulator regulator.34: func:max77804_get_enable_register
<6>[ 1.354392] [c7] muic_notifier_attach_attached_dev: (1)
<6>[ 1.354408] [c7] muic_notifier_notify: CMD=1, DATA=1
<6>[ 1.354423] [c7] muic_handle_dock_notification: ignore(1)
<6>[ 1.354438] [c7] muic_notifier_notify: notify done(0x0)
<6>[ 1.368345] [c7] brd: module loaded
<6>[ 1.375598] [c7] loop: module loaded
<6>[ 1.377873] [c7] tima_debug_log_read_init: Registering /proc/tima_debug_log Interface
<6>[ 1.377909] [c7] Entering dualwave_init 421
<6>[ 1.378166] [c7] ***** failed to call kobject_event (-2) dualwave_init 468 *****
<7>[ 1.393341] [c7] of_get_named_gpio_flags exited with status 165
<7>[ 1.393764] [c7] of_get_named_gpio_flags exited with status 150
<6>[ 1.394084] [c7] LDO1: 1175 <--> 1200 mV at 1200 mV
<6>[ 1.394162] [c7] LDO1: supplied by vdd_ldo18
<6>[ 1.418661] [c7] arizona spi2.0: WM5110 revision E
<6>[ 1.427271] [c7] MICVDD: 900 <--> 3300 mV at 2500 mV
<6>[ 1.427356] [c7] MICVDD: supplied by vdd_ldo18
<7>[ 1.428288] [c7] gpiochip_find_base: found new base at 288
<7>[ 1.428582] [c7] gpiochip_add: registered GPIOs 288 to 292 on device: arizona
<6>[ 1.429760] [c7] pn547_dev_init, Loading pn547 driver
<6>[ 1.429985] [c7] pn547_probe started...
<7>[ 1.430010] [c7] of_get_named_gpio_flags exited with status 19
<7>[ 1.430038] [c7] of_get_named_gpio_flags exited with status 159
<7>[ 1.430061] [c7] of_get_named_gpio_flags exited with status 158
<7>[ 1.430082] [c7] of_get_named_gpio_flags exited with status 8
<6>[ 1.430098] [c7] pn547_parse_dt: irq : 19, ven : 159, firm : 158, clk_req : 8
<6>[ 1.430517] [c7] pn547 10-0029: pn547_probe : requesting IRQ 555
<6>[ 1.430692] [c7] pn547 10-0029: pn547_probe : requesting clk_req irq 709
<6>[ 1.446159] [c7] pn547_probe : i2c addr=0x2B
<6>[ 1.446179] [c7] pn547_probe finished...
<6>[ 1.447182] [c7] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.447199] [c7] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 1.447598] [c7] PPP generic driver version 2.4.2
<6>[ 1.448170] [c7] PPP BSD Compression module registered
<6>[ 1.448188] [c7] PPP Deflate Compression module registered
<6>[ 1.448225] [c7] PPP MPPE Compression module registered
<6>[ 1.448241] [c7] NET: Registered protocol family 24
<6>[ 1.448259] [c7] dhd_wlan_init: start
<7>[ 1.448783] [c7] of_get_named_gpio_flags exited with status 7
<7>[ 1.449165] [c7] of_get_named_gpio_flags exited with status 24
<3>[ 1.449571] [c7] dhd_init_wlan_mem: WIFI MEM Allocated
<7>[ 1.450055] [c7] samsung-usb2phy 12130000.usb2phy: Can't get usb-phy sysreg cfg register
<7>[ 1.450098] [c7] samsung-usb2phy 12130000.usb2phy: Failed to get hsicphy_en_mask
<7>[ 1.451804] [c7] samsung-usb3phy 12100000.usbphy: Can't get usb-phy sysreg cfg register
<7>[ 1.451987] [c7] samsung-usb3phy 12500000.usbphy: Can't get usb-phy sysreg cfg register
<6>[ 1.454067] [c7] exynos-dwc3 usb.1: failed to configure pins
<7>[ 1.454747] [c7] samsung-usb3phy 12100000.usbphy: end of samsung_usb3phy_init
<6>[ 1.654966] [c7] samsung-usb3phy 12100000.usbphy: set phyparam0 = 0x26d4e6e4
<3>[ 1.655034] [c7] dwc3 12000000.dwc3: dwc3_otg address space is not supported
<6>[ 1.655070] [c7] dwc3 12000000.dwc3: vbus regulator is not available
<7>[ 1.655111] [c7] samsung-usb3phy 12100000.usbphy: end of samsung_usb3phy_shutdown
<3>[ 1.655766] [c7] dwc3 12000000.dwc3: Binding gadget dwc3-gadget
<7>[ 1.655789] [c7] usb: dwc3_otg_statemachine fsm->reset:0, phy->state:0, fsm->id: 1, fsm->b_sess_vld:0
<7>[ 1.655808] [c7] usb: dwc3_otg_statemachine fsm->reset:0, phy->state:1, fsm->id: 1, fsm->b_sess_vld:0
<6>[ 1.656672] [c7] exynos-dwc3 usb.2: failed to configure pins
<7>[ 1.657349] [c7] samsung-usb3phy 12500000.usbphy: end of samsung_usb3phy_init
<6>[ 1.857547] [c7] samsung-usb3phy 12500000.usbphy: set phyparam0 = 0x26d4e6e4
<3>[ 1.857615] [c7] dwc3 12400000.dwc3: dwc3_otg address space is not supported
<6>[ 1.857647] [c7] dwc3 12400000.dwc3: vbus regulator is not available
<7>[ 1.857687] [c7] samsung-usb3phy 12500000.usbphy: end of samsung_usb3phy_shutdown
<3>[ 1.858369] [c7] dwc3 12400000.dwc3: Binding gadget dwc3-gadget
<7>[ 1.858390] [c7] usb: dwc3_otg_statemachine fsm->reset:0, phy->state:0, fsm->id: 1, fsm->b_sess_vld:0
<7>[ 1.858409] [c7] usb: dwc3_otg_statemachine fsm->reset:0, phy->state:1, fsm->id: 1, fsm->b_sess_vld:0
<6>[ 1.859033] [c7] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 1.859053] [c7] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
<6>[ 1.859086] [c7] ehci-s5p: EHCI s5p driver
<7>[ 1.859456] [c7] samsung-usb2phy 12130000.usb2phy: Can't configure specified phy mode
<6>[ 1.859597] [c7] samsung_usb2phy_init: usage=0, child=0
<7>[ 1.859616] [c7] samsung-usb2phy 12130000.usb2phy: end of samsung_usb2phy_init
<7>[ 1.859635] [c7] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_runtime_resume
<6>[ 1.859707] [c7] samsung_usb2phy_runtime_resume: usage=1, child=0
<6>[ 1.859727] [c7] s5p-ehci 12110000.usb: EHCI Host Controller
<6>[ 1.859763] [c7] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
<7>[ 1.859794] [c7] s5p-ehci 12110000.usb: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
<7>[ 1.859817] [c7] s5p-ehci 12110000.usb: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
<7>[ 1.859885] [c7] s5p-ehci 12110000.usb: park 0
<7>[ 1.859915] [c7] s5p-ehci 12110000.usb: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 1.859955] [c7] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
<7>[ 1.859980] [c7] s5p-ehci 12110000.usb: init command 0010005 (park)=0 ithresh=1 period=512 RUN
<6>[ 1.867995] [c7] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
<7>[ 1.868141] [c7] usb usb1: default language 0x0409
<7>[ 1.868191] [c7] usb usb1: udev 1, busnum 1, minor = 0
<6>[ 1.868211] [c7] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.868229] [c7] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.868245] [c7] usb usb1: Product: EHCI Host Controller
<6>[ 1.868262] [c7] usb usb1: Manufacturer: Linux 3.10.9-4521975 ehci_hcd
<6>[ 1.868278] [c7] usb usb1: SerialNumber: 12110000.usb
<7>[ 1.868967] [c7] usb usb1: usb_probe_device
<7>[ 1.868988] [c7] usb usb1: configuration #1 chosen from 1 choice
<7>[ 1.869032] [c7] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[ 1.869357] [c7] hub 1-0:1.0: usb_probe_interface
<7>[ 1.869378] [c7] hub 1-0:1.0: usb_probe_interface - got id
<6>[ 1.869402] [c7] hub 1-0:1.0: USB hub found
<6>[ 1.869433] [c7] hub 1-0:1.0: 3 ports detected
<7>[ 1.869451] [c7] hub 1-0:1.0: standalone hub
<7>[ 1.869467] [c7] hub 1-0:1.0: individual port power switching
<7>[ 1.869483] [c7] hub 1-0:1.0: individual port over-current protection
<7>[ 1.869499] [c7] hub 1-0:1.0: power on to power good time: 20ms
<7>[ 1.869516] [c7] usb usb1: (0)send start USB_REQ_GET_STATUS
<7>[ 1.869542] [c7] usb usb1: (0)send start USB_REQ_GET_STATUS
<7>[ 1.869567] [c7] hub 1-0:1.0: local power source is good
<7>[ 1.869768] [c7] hub 1-0:1.0: enabling power on all ports
<6>[ 1.871079] [c7] usbcore: registered new interface driver usblp
<6>[ 1.871318] [c7] usbcore: registered new interface driver usb-storage
<6>[ 1.871768] [c7] usbcore: registered new interface driver usbserial
<6>[ 1.871983] [c7] usbcore: registered new interface driver pl2303
<6>[ 1.872195] [c7] usbserial: USB Serial support registered for pl2303
<6>[ 1.873182] [c4] usb_notify: ovc_init
<6>[ 1.873956] [c4] mousedev: PS/2 mouse device common for all mice
<7>[ 1.875458] [c4] of_get_named_gpio_flags exited with status 74
<7>[ 1.875483] [c4] of_get_named_gpio_flags exited with status 73
<7>[ 1.875505] [c4] of_get_named_gpio_flags exited with status 1
<3>[ 1.875530] [c4] touchkey:failed to read fw_path -22
<6>[ 1.875549] [c4] sec_touchkey_driver 3-0020: touchkey:fw path cypress/cypress_20075_k_m06.fw 28
<6>[ 1.875922] [c4] input: sec_touchkey as /devices/i2c.9/i2c-3/3-0020/input/input1
<3>[ 1.875956] [c4] sec_touchkey_driver 3-0020: touchkey_input_open: Touchkey is not probed
<6>[ 1.876491] [c4] sec_touchkey_driver 3-0020: touchkey_power_on: on
<6>[ 1.877026] sec_touchkey_driver 3-0020: touchkey_led_power_on: on
<3>[ 1.928150] sec_touchkey_driver 3-0020: LCD type Print : 0x622813
<3>[ 1.963922] [c4] sec_touchkey_driver 3-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x0, failed.
<7>[ 1.968010] [c7] usb usb1: (1)send start USB_REQ_GET_STATUS
<7>[ 1.968046] [c7] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 1.968075] [c7] usb usb1: (3)send start USB_REQ_GET_STATUS
<7>[ 1.968147] [c6] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
<7>[ 1.968225] [c0] hub 1-0:1.0: hub_suspend
<7>[ 1.968268] [c0] usb usb1: bus auto-suspend, wakeup 1
<7>[ 1.968289] [c0] s5p-ehci 12110000.usb: suspend root hub
<7>[ 1.968993] [c0] usb usb1: usb_suspend_both: status 0
<7>[ 1.969022] [c0] s5p-ehci 12110000.usb: s5p_ehci_runtime_suspend
<7>[ 1.983043] [c0] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_runtime_suspend
<6>[ 1.983070] [c0] samsung_usb2phy_runtime_suspend: usage=0, child=0
<6>[ 1.983090] [c0] s5p_ehci_runtime_suspend: usage=0, child=0
<6>[ 1.998917] [c4] sec_touchkey_driver 3-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<3>[ 1.999134] [c7] sec_touchkey_driver 3-0020: touchkey_interrupt: Touchkey is not probed
<6>[ 1.999201] [c4] sec_touchkey_driver 3-0020: touchkey:fw path loaded cypress/cypress_20075_k_m06.fw
<6>[ 1.999221] [c4] sec_touchkey_driver 3-0020: fw ver 0x1d, new fw ver 0x1d
<6>[ 1.999239] [c4] sec_touchkey_driver 3-0020: module ver 0x6, new module ver 0x6
<6>[ 1.999256] [c4] sec_touchkey_driver 3-0020: new checksum 0xa641
<7>[ 1.999327] [c5] touchkey:ISSP_main
<6>[ 1.999364] [c5] sec_touchkey_driver 3-0020: touchkey_led_power_on: off
<6>[ 1.999916] sec_touchkey_driver 3-0020: touchkey_power_on: off
<7>[ 2.000597] of_get_named_gpio_flags exited with status 22
<6>[ 2.000809] [c4] synaptics_rmi4_i2c 8-0020: synaptics_power_ctrl: on
<6>[ 2.001513] [c5] sec_touchkey_driver 3-0020: touchkey_power_on: on
<6>[ 2.154750] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_check_status: Device status[0x81] status.code[1]
<6>[ 2.156798] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f12_set_feature: [0x00], Set All disabled
<6>[ 2.158266] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f12_init: 12 max_x,y(1079,1919) num_Rx,Tx(28,16), num_finger(10), node:448, threshold:30, gloved sensitivity:e3
<6>[ 2.162256] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f51_set_init: General control[0x64],2[0x20] Hsync is GD
<6>[ 2.162461] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f51_set_proximity_enables: [0x82], Hover is disabled
<6>[ 2.165673] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_query_device: Number of interrupt registers = 1 sum of intr_count = 6
<6>[ 2.166987] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_query_device: Product ID [s5100 A3 F. 3]
<6>[ 2.167013] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_query_device: Result, date, revision, version, pr_num, b/l [0, 06/05, 0xA3, 0xA3, PR1670441, V6[6.4]]
<6>[ 2.167315] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_query_device: Interrupt enable[0] = 0x24
<6>[ 2.168388] [c4] input: sec_touchscreen as /devices/12c60000.i2c/i2c-8/8-0020/input/input2
<6>[ 2.178286] [c6] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_fw_update_on_probe: Load firmware : tsp_synaptics/synaptics_s5100_a3_k_FHD.fw
<6>[ 2.178319] [c6] synaptics_rmi4_i2c 8-0020: synaptics_skip_firmware_update: FW size. revision, version [105536, 0xA3/0xA3(BIN/IC), 0x55/0xA3(BIN/IC)]
<6>[ 2.178341] [c6] synaptics_rmi4_i2c 8-0020: synaptics_skip_firmware_update: Do not need to update
<3>[ 2.178387] [c6] input_booster_send_event: booster is not loaded
<6>[ 2.178560] [c6] synaptics_rmi4_i2c 8-0020: synaptics_power_ctrl: off
<6>[ 2.183053] [c6] s2m-rtc s2m-rtc: s2m_rtc_enable_wtsr_smpl: WTSR: enable, SMPL: enable
<6>[ 2.186068] [c6] s2m-rtc s2m-rtc: s2m_rtc_read_time: 2014-01-08 13:50:21(0x08)PM
<6>[ 2.187493] [c6] s2m-rtc s2m-rtc: s2m_rtc_read_alarm: 2014-01-08 14:01:39(3)
<6>[ 2.189046] [c6] s2m-rtc s2m-rtc: s2m_rtc_read_time: 2014-01-08 13:50:21(0x08)PM
<6>[ 2.189491] [c6] s2m-rtc s2m-rtc: rtc core: registered s2m-rtc as rtc0
<6>[ 2.190142] [c6] i2c /dev entries driver
<6>[ 2.195272] [c6] mdev_output.6: Media0[0xed933c00] was registered successfully
<6>[ 2.196250] [c6] PM DOMAIN: spd-gscl0, Device : 13e00000.gsc Registered
<6>[ 2.196283] [c6] exynos-gsc 13e00000.gsc: exynos-iommu gpd_dev_ops inserted!
<7>[ 2.196618] [c5] touchkey:chk, file 0xa641, ic 0xa641
<3>[ 2.196636] [c5] touchkey:chk is same. pass fw update.
<6>[ 2.196667] [c5] sec_touchkey_driver 3-0020: touchkey_power_on: off
<6>[ 2.197483] exynos-gsc 13e00000.gsc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.197520] [c6] exynos-gsc 13e00000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
<6>[ 2.197548] [c6] exynos-gsc 13e00000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
<6>[ 2.197580] [c6] exynos-gsc 13e00000.gsc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
<6>[ 2.197611] [c6] exynos-gsc 13e00000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
<6>[ 2.197636] [c6] exynos-gsc 13e00000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<6>[ 2.197893] [c6] [INFO]gsc_probe:1647: gsc-0 registered successfully
<6>[ 2.198215] [c6] PM DOMAIN: spd-gscl1, Device : 13e10000.gsc Registered
<6>[ 2.198243] [c6] exynos-gsc 13e10000.gsc: exynos-iommu gpd_dev_ops inserted!
<6>[ 2.199313] [c6] exynos-gsc 13e10000.gsc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.199347] [c6] exynos-gsc 13e10000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
<6>[ 2.199374] [c6] exynos-gsc 13e10000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
<6>[ 2.199405] [c6] exynos-gsc 13e10000.gsc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
<6>[ 2.199436] [c6] exynos-gsc 13e10000.gsc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
<6>[ 2.199461] [c6] exynos-gsc 13e10000.gsc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<6>[ 2.199671] [c6] [INFO]gsc_probe:1647: gsc-1 registered successfully
<6>[ 2.200527] [c6] PM DOMAIN: pd-mfc, Device : 11000000.mfc Registered
<6>[ 2.200560] [c6] s5p-mfc 11000000.mfc: exynos-iommu gpd_dev_ops inserted!
<7>[ 2.200590] [c6] s5p-mfc 11000000.mfc: s5p_mfc_probe()
<7>[ 2.200613] [c6] s5p-mfc 11000000.mfc: of alias get id : mfc-0
<6>[ 2.201222] [c6] s5p-mfc 11000000.mfc: decoder registered as /dev/video6
<6>[ 2.201578] [c6] s5p-mfc 11000000.mfc: encoder registered as /dev/video7
<6>[ 2.201922] [c6] s5p-mfc 11000000.mfc: secure decoder registered as /dev/video8
<6>[ 2.202261] [c6] s5p-mfc 11000000.mfc: secure encoder registered as /dev/video9
<6>[ 2.202474] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.202508] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
<6>[ 2.202535] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
<6>[ 2.202566] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
<6>[ 2.202596] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
<6>[ 2.202621] [c6] s5p-mfc 11000000.mfc: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<6>[ 2.203264] [c6] [d:0] s5p_mfc_probe:3053: QoS table[0] int : 83000 (mfc : 96000), mif : 165000
<6>[ 2.203286] [c6] [d:0] s5p_mfc_probe:3053: QoS table[1] int : 111000 (mfc : 111000), mif : 206000
<6>[ 2.203303] [c6] [d:0] s5p_mfc_probe:3053: QoS table[2] int : 222000 (mfc : 167000), mif : 275000
<6>[ 2.203320] [c6] [d:0] s5p_mfc_probe:3053: QoS table[3] int : 333000 (mfc : 222000), mif : 413000
<6>[ 2.203336] [c6] [d:0] s5p_mfc_probe:3053: QoS table[4] int : 420000 (mfc : 400000), mif : 413000
<6>[ 2.203353] [c6] [d:0] s5p_mfc_probe:3059: >> Extra[4] int : 420000 (mfc : 400000), mif : 825000
<7>[ 2.203367] [c6] s5p_mfc_probe--
<6>[ 2.204701] [c6] PM DOMAIN: pd-isp, Device : fimc_is_companion.7 Registered
<4>[ 2.204732] [c6] [@][WRN] fimc_is_dev is not yet probed
<6>[ 2.204790] [c6] platform exynos-fimc-is-companion: Driver exynos-fimc-is-companion requests probe deferral
<6>[ 2.205730] [c6] PM DOMAIN: pd-isp, Device : 13180000.fimc_is Registered
<6>[ 2.205758] [c6] exynos-fimc-is 13180000.fimc_is: exynos-iommu gpd_dev_ops inserted!
<6>[ 2.205786] [c6] [@]fimc_is_probe:start
<3>[ 2.205809] [c6] [@][ERR]fimc_is_parse_dt:428: use_sensor_dynamic_voltage_mode read is fail(-22)
<3>[ 2.205826] [c6] [@][ERR]fimc_is_parse_dt:439: use_ois_hsi2c not use(0)
<3>[ 2.205843] [c6] [@][ERR]fimc_is_parse_dt:444: use_module_check not use(0)
<4>[ 2.205877] [c6] full_bypass_mcuctl: no property in the node.
<4>[ 2.205893] [c6] full_bypass_3a0: no property in the node.
<4>[ 2.205908] [c6] full_bypass_3a1: no property in the node.
<4>[ 2.205923] [c6] full_bypass_isp: no property in the node.
<4>[ 2.205939] [c6] full_bypass_scc: no property in the node.
<4>[ 2.205954] [c6] full_bypass_odc: no property in the node.
<4>[ 2.205972] [c6] full_bypass_scp: no property in the node.
<4>[ 2.205987] [c6] full_bypass_fd: no property in the node.
<4>[ 2.206003] [c6] version_3a0: no property in the node.
<4>[ 2.206018] [c6] version_3a1: no property in the node.
<4>[ 2.206032] [c6] version_isp: no property in the node.
<4>[ 2.206047] [c6] version_drc: no property in the node.
<4>[ 2.206061] [c6] version_scc: no property in the node.
<4>[ 2.206075] [c6] version_odc: no property in the node.
<4>[ 2.206090] [c6] version_dis: no property in the node.
<4>[ 2.206104] [c6] version_dnr: no property in the node.
<4>[ 2.206118] [c6] version_scp: no property in the node.
<4>[ 2.206132] [c6] version_fd: no property in the node.
<6>[ 2.206149] [c6] int value: 0
<6>[ 2.206163] [c6] String value: 0-gate_3aa1
<6>[ 2.206176] [c6] int value: 1
<6>[ 2.206189] [c6] String value: 1-gate_isp
<6>[ 2.206202] [c6] int value: 2
<6>[ 2.206214] [c6] String value: 2-gate_drc
<6>[ 2.206227] [c6] int value: 3
<6>[ 2.206239] [c6] String value: 3-gate_scalerc
<6>[ 2.206252] [c6] int value: 5
<6>[ 2.206264] [c6] String value: 5-gate_dis
<6>[ 2.206277] [c6] int value: 6
<6>[ 2.206289] [c6] String value: 6-gate_3dnr
<6>[ 2.206301] [c6] int value: 7
<6>[ 2.206314] [c6] String value: 7-gate_scalerp
<6>[ 2.206327] [c6] int value: 8
<6>[ 2.206339] [c6] String value: 8-gate_fd
<6>[ 2.206352] [c6] int value: 9
<6>[ 2.206364] [c6] String value: 9-gate_3aa0
<6>[ 2.206384] [c6] (1) [0x0 , 0x0, 0x0, 0x0
<6>[ 2.206403] [c6] (2) [0x0 , 0x0, 0x0, 0x0
<6>[ 2.206418] [c6] (2) int1 value: 1
<6>[ 2.206431] [c6] (2) int1 value: 2
<6>[ 2.206443] [c6] (2) int1 value: 3
<6>[ 2.206456] [c6] (2) int1 value: 6
<6>[ 2.206468] [c6] (2) int1 value: 7
<6>[ 2.206481] [c6] (2) int1 value: 8
<6>[ 2.206495] [c6] (2) int2 value: 1
<6>[ 2.206507] [c6] (2) int2 value: 2
<6>[ 2.206519] [c6] (2) int2 value: 3
<6>[ 2.206531] [c6] (2) int2 value: 6
<6>[ 2.206543] [c6] (2) int2 value: 7
<6>[ 2.206556] [c6] (2) int2 value: 8
<6>[ 2.206572] [c6] (3) [0x1ce , 0x1ce, 0x0, 0x0
<4>[ 2.206633] [c6] rear_preview_fhd_bns_off_int: no property in the node.
<4>[ 2.206651] [c6] rear_preview_fhd_bns_off_cam: no property in the node.
<4>[ 2.206669] [c6] rear_preview_fhd_bns_off_mif: no property in the node.
<4>[ 2.206686] [c6] rear_preview_fhd_bns_off_i2c: no property in the node.
<4>[ 2.206739] [c6] rear_camcording_fhd_bns_off_int: no property in the node.
<4>[ 2.206757] [c6] rear_camcording_fhd_bns_off_cam: no property in the node.
<4>[ 2.206776] [c6] rear_camcording_fhd_bns_off_mif: no property in the node.
<4>[ 2.206794] [c6] rear_camcording_fhd_bns_off_i2c: no property in the node.
<6>[ 2.207222] [c6] exynos-fimc-is 13180000.fimc_is: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.207256] [c6] exynos-fimc-is 13180000.fimc_is: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x50000000.
<6>[ 2.207287] [c6] exynos-fimc-is 13180000.fimc_is: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x80000000.
<6>[ 2.207319] [c6] exynos-fimc-is 13180000.fimc_is: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0xa0000000.
<6>[ 2.207344] [c6] exynos-fimc-is 13180000.fimc_is: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<6>[ 2.207773] [c6] fimc_is_dvfs_init
<6>[ 2.207791] [c6] [@]fimc_is_resource_probe
<6>[ 2.207812] [c6] [@]sensor_8b1_probe(0)
<6>[ 2.207829] [c6] [@]sensor_2p2_probe(0)
<6>[ 2.208347] [c6] [@][VID] exynos-fimc-is-3aa.0(110) is created
<6>[ 2.208692] [c6] [@][VID] exynos-fimc-is-3aa.0c(111) is created
<6>[ 2.209046] [c6] [@][VID] exynos-fimc-is-3aa.1(114) is created
<6>[ 2.209387] [c6] [@][VID] exynos-fimc-is-3aa.1c(115) is created
<6>[ 2.209404] [c6] [@][3AC1:V:1] fimc_is_3a1c_video_probe(0)
<6>[ 2.209741] [c6] [@][VID] exynos-fimc-is-isp(130) is created
<6>[ 2.210089] [c6] [@][VID] exynos-fimc-is-scalerc(134) is created
<6>[ 2.210427] [c6] [@][VID] exynos-fimc-is-scalerp(137) is created
<6>[ 2.217427] [c6] [@][COR] Device virtual for internal: f0401000
<6>[ 2.218329] [c6] fimc_is_dvfs_init
<6>[ 2.218347] [c6] [@]fimc_is_probe:end
<6>[ 2.219233] [c6] fimc_is_fan53555_probe start
<7>[ 2.219604] [c6] of_get_named_gpio_flags exited with status 130
<3>[ 2.223018] [c6] [fimc_is_fan53555_probe::2169]fan53555 [Read :: a8 ,a8]
<3>[ 2.223018]
<6>[ 2.223360] [c6] fimc_is_fan53555_probe end
<6>[ 2.223890] [c6] exynos5422_cfg_clk_sclk
<6>[ 2.226894] [c6] exynos5422_cfg_clk_cam
<4>[ 2.237520] [c6] s3c64xx-spi 131a0000.spi: state restore latency exceeded, new value 13627500 ns
<6>[ 2.237826] [c6] sclk = gpf1-0, ssn = gpf1-1, miso = gpf1-2, mois = gpf1-3 spi_channel:(0)
<6>[ 2.238464] [c6] fimc_is_i2c0 11-003d: fimc_is_i2c0 driver probed!
<6>[ 2.239351] [c6] PM DOMAIN: pd-cam, Device : 13c00000.fimc_is_sensor Registered
<6>[ 2.239382] [c6] exynos-fimc-is-sensor 13c00000.fimc_is_sensor: exynos-iommu gpd_dev_ops inserted!
<6>[ 2.239701] [c6] exynos-fimc-is-sensor 13c00000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.239734] [c6] exynos-fimc-is-sensor 13c00000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x50000000.
<6>[ 2.239765] [c6] exynos-fimc-is-sensor 13c00000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x80000000.
<6>[ 2.239795] [c6] exynos-fimc-is-sensor 13c00000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0xa0000000.
<6>[ 2.239821] [c6] exynos-fimc-is-sensor 13c00000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<6>[ 2.240081] [c6] [@][0][FRT:D] fimc_is_csi_probe(0)
<6>[ 2.240101] [c6] [@][BAK:D:0] fimc_is_flite_probe(0)
<6>[ 2.240521] [c6] [@][VID] exynos-fimc-is-sensor0(100) is created
<6>[ 2.240539] [c6] [@][0][SEN:D] fimc_is_sensor_probe(0)
<6>[ 2.240962] [c6] PM DOMAIN: pd-cam, Device : 13c10000.fimc_is_sensor Registered
<6>[ 2.240990] [c6] exynos-fimc-is-sensor 13c10000.fimc_is_sensor: exynos-iommu gpd_dev_ops inserted!
<4>[ 2.241042] [c6] flash_first_gpio: no property in the node.
<4>[ 2.241059] [c6] flash_second_gpio: no property in the node.
<6>[ 2.241078] [c6] [@]fimc_is_power_setpin: sensor found(id 11).
<7>[ 2.241107] [c6] of_get_named_gpio_flags exited with status 128
<7>[ 2.241140] [c6] of_get_named_gpio_flags exited with status 71
<7>[ 2.241174] [c6] of_get_named_gpio_flags exited with status 125
<6>[ 2.241207] [c6] [0][0][5][ch1] gpio function cfg is seted
<6>[ 2.241222] [0][1][1][off1] gpio function cfg is seted[1][0][5][ch1] gpio function cfg is seted
<6>[ 2.241248] [1][1][1][off1] gpio function cfg is seted<6>[ 2.241359] exynos-fimc-is-sensor 13c10000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.241391] [c6] exynos-fimc-is-sensor 13c10000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x50000000.
<6>[ 2.241421] [c6] exynos-fimc-is-sensor 13c10000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x80000000.
<6>[ 2.241451] [c6] exynos-fimc-is-sensor 13c10000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0xa0000000.
<6>[ 2.241475] [c6] exynos-fimc-is-sensor 13c10000.fimc_is_sensor: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<6>[ 2.241671] [c6] [@][1][FRT:D] fimc_is_csi_probe(0)
<6>[ 2.241690] [c6] [@][BAK:D:1] fimc_is_flite_probe(0)
<6>[ 2.242078] [c6] [@][VID] exynos-fimc-is-sensor1(101) is created
<6>[ 2.242096] [c6] [@][1][SEN:D] fimc_is_sensor_probe(0)
<6>[ 2.242564] [c6] [@]sensor_8b1_probe(0)
<6>[ 2.243334] [c6] PM DOMAIN: spd-mscl0, Device : 12800000.scaler Registered
<6>[ 2.243362] [c6] exynos5-scaler 12800000.scaler: exynos-iommu gpd_dev_ops inserted!
<6>[ 2.243473] [c6] exynos5-scaler 12800000.scaler: 'mux_user' clock is not present
<6>[ 2.243930] [c6] exynos5-scaler 12800000.scaler: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.243963] [c6] exynos5-scaler 12800000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
<6>[ 2.243990] [c6] exynos5-scaler 12800000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
<6>[ 2.244020] [c6] exynos5-scaler 12800000.scaler: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
<6>[ 2.244053] [c6] exynos5-scaler 12800000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
<6>[ 2.244079] [c6] exynos5-scaler 12800000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<6>[ 2.244787] [c6] exynos5-scaler 12800000.scaler: Driver probed successfully(version: 80010000)
<6>[ 2.245065] [c6] PM DOMAIN: spd-mscl1, Device : 12810000.scaler Registered
<6>[ 2.245091] [c6] exynos5-scaler 12810000.scaler: exynos-iommu gpd_dev_ops inserted!
<6>[ 2.245188] [c6] exynos5-scaler 12810000.scaler: 'mux_user' clock is not present
<6>[ 2.245629] [c6] exynos5-scaler 12810000.scaler: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.245662] [c6] exynos5-scaler 12810000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
<6>[ 2.245688] [c6] exynos5-scaler 12810000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
<6>[ 2.245719] [c6] exynos5-scaler 12810000.scaler: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
<6>[ 2.245749] [c6] exynos5-scaler 12810000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
<6>[ 2.245773] [c6] exynos5-scaler 12810000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<6>[ 2.246467] [c6] exynos5-scaler 12810000.scaler: Driver probed successfully(version: 80010000)
<6>[ 2.246747] [c6] PM DOMAIN: spd-mscl2, Device : 12820000.scaler Registered
<6>[ 2.246775] [c6] exynos5-scaler 12820000.scaler: exynos-iommu gpd_dev_ops inserted!
<6>[ 2.246871] [c6] exynos5-scaler 12820000.scaler: 'mux_user' clock is not present
<6>[ 2.247314] [c6] exynos5-scaler 12820000.scaler: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.247347] [c6] exynos5-scaler 12820000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
<6>[ 2.247373] [c6] exynos5-scaler 12820000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
<6>[ 2.247404] [c6] exynos5-scaler 12820000.scaler: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
<6>[ 2.247434] [c6] exynos5-scaler 12820000.scaler: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
<6>[ 2.247460] [c6] exynos5-scaler 12820000.scaler: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<6>[ 2.248021] [c5] sec_touchkey_driver 3-0020: touchkey_power_on: on
<6>[ 2.248223] exynos5-scaler 12820000.scaler: Driver probed successfully(version: 80010000)
<6>[ 2.248572] [c5] sec_touchkey_driver 3-0020: touchkey_led_power_on: on
<6>[ 2.248702] Exynos Graphics 2D driver, (c) 2011 Samsung Electronics
<6>[ 2.249084] [c5] sec_touchkey_driver 3-0020: finish f/w update
<6>[ 2.249123] [c5] sec_touchkey_driver 3-0020: touchkey_led_power_on: off
<6>[ 2.249369] s5p-fimg2d 10850000.fimg2d: ++fimg2d_probe
<6>[ 2.249412] [c6] [parse_g2d_qos_platdata] cpu_min:1900000, kfc_min:1500000, mif_min:825000, int_min:400000
<6>[ 2.249437] [c6] [parse_g2d_qos_platdata] cpu_min:0, kfc_min:800000, mif_min:633000, int_min:400000
<6>[ 2.249463] [c6] [parse_g2d_qos_platdata] cpu_min:0, kfc_min:800000, mif_min:543000, int_min:333000
<6>[ 2.249495] [c6] [parse_g2d_qos_platdata] cpu_min:0, kfc_min:800000, mif_min:413000, int_min:222000
<6>[ 2.249526] [c6] [parse_g2d_qos_platdata] cpu_min:0, kfc_min:800000, mif_min:275000, int_min:222000
<6>[ 2.249783] [c7] [fimg2d_clk_setup] gate clk: clk_g2d
<6>[ 2.249803] [c7] [fimg2d_probe] enable runtime pm
<6>[ 2.250188] [c7] s5p-fimg2d 10850000.fimg2d: fimg2d registered successfully
<6>[ 2.251558] [c7] jpeg-hx2 11f50000.jpeg: JPEG driver is registered to /dev/video14
<6>[ 2.251911] [c7] jpeg-hx2 11f50000.jpeg: JPEG driver is registered to /dev/video13
<6>[ 2.251983] [c7] jpeg-hx2 11f50000.jpeg: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.252017] [c7] jpeg-hx2 11f50000.jpeg: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
<6>[ 2.252044] [c7] jpeg-hx2 11f50000.jpeg: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
<6>[ 2.252075] [c7] jpeg-hx2 11f50000.jpeg: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
<6>[ 2.252106] [c7] jpeg-hx2 11f50000.jpeg: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
<6>[ 2.252132] [c7] jpeg-hx2 11f50000.jpeg: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<3>[ 2.252395] [c7] jpeg-hx2 11f50000.jpeg: jpeg-hx2.0 registered successfully
<6>[ 2.253258] [c7] jpeg-hx2 11f60000.jpeg: JPEG driver is registered to /dev/video12
<6>[ 2.253613] [c7] jpeg-hx2 11f60000.jpeg: JPEG driver is registered to /dev/video11
<6>[ 2.253683] [c7] jpeg-hx2 11f60000.jpeg: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 2.253716] [c7] jpeg-hx2 11f60000.jpeg: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x50000000.
<6>[ 2.253741] [c7] jpeg-hx2 11f60000.jpeg: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0x70000000.
<6>[ 2.253772] [c7] jpeg-hx2 11f60000.jpeg: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x80000000.
<6>[ 2.253803] [c7] jpeg-hx2 11f60000.jpeg: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0xb0000000.
<6>[ 2.253828] [c7] jpeg-hx2 11f60000.jpeg: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<3>[ 2.254084] [c7] jpeg-hx2 11f60000.jpeg: jpeg-hx2.1 registered successfully
<4>[ 2.254742] [c7] i2c-core: driver [exynos_hdcp] using legacy suspend method
<4>[ 2.254760] [c7] i2c-core: driver [exynos_hdcp] using legacy resume method
<6>[ 2.254811] [c7] Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
<6>[ 2.255398] [c7] PM DOMAIN: spd-hdmi, Device : 14530000.hdmi Registered
<6>[ 2.255432] [c7] s5p-hdmi 14530000.hdmi: probe start
<6>[ 2.255455] [c7] s5p-hdmi 14530000.hdmi: HDMI ip version 5
<6>[ 2.255544] [c7] s5p-hdmi 14530000.hdmi: success request hdmi-int irq
<7>[ 2.255777] [c7] of_get_named_gpio_flags exited with status 39
<6>[ 2.255914] [c7] s5p-hdmi 14530000.hdmi: success request GPIO for hdmi-hpd
<6>[ 2.256174] [c7] s5p-hdmi 14530000.hdmi: success register switch device
<6>[ 2.256365] [c7] s5p-hdmi 14530000.hdmi: success request hdmi-ext irq
<6>[ 2.256641] [c7] s5p-hdmi 14530000.hdmi: hdmi audio master 48fs support: no
<6>[ 2.256817] [c7] s5p-hdmi 14530000.hdmi: probe sucessful
<6>[ 2.257517] [c7] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
<6>[ 2.258059] [c7] PM DOMAIN: spd-mixer, Device : 14450000.mixer Registered
<6>[ 2.258088] [c7] s5p-mixer 14450000.mixer: exynos-iommu gpd_dev_ops inserted!
<6>[ 2.258119] [c7] s5p-mixer 14450000.mixer: probe start
<6>[ 2.258140] s5p-mixer 14450000.mixer: tv ip version5
<6>[ 2.258456] [c7] s5p-mixer 14450000.mixer: resources acquired
<6>[ 2.258526] [c7] s5p-mixer 14450000.mixer: IOVMM: IOVM SIZE = 0x50000000 B, IOVMM from 0x10000000.
<6>[ 2.258570] [c7] s5p-mixer 14450000.mixer: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x60000000.
<6>[ 2.258611] [c7] s5p-mixer 14450000.mixer: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0xa0000000.
<6>[ 2.258829] [c7] s5p-mixer 14450000.mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
<6>[ 2.259301] [c7] s5p-mixer 14450000.mixer: registered layer mxr0_graph0 as /dev/video16
<6>[ 2.259681] [c7] s5p-mixer 14450000.mixer: registered layer mxr0_graph1 as /dev/video17
<6>[ 2.260066] [c7] s5p-mixer 14450000.mixer: registered layer mxr1_graph2 as /dev/video18
<6>[ 2.260444] [c7] s5p-mixer 14450000.mixer: registered layer mxr1_graph3 as /dev/video19
<6>[ 2.260464] [c7] s5p-mixer 14450000.mixer: mixer0 create links
<6>[ 2.260492] [c7] s5p-mixer 14450000.mixer: mixer1 create links
<6>[ 2.260520] [c7] s5p-mixer 14450000.mixer: mixer links are created successfully
<6>[ 2.260557] [c7] s5p-mixer 14450000.mixer: probe successful
<3>[ 2.261592] [c7] sec-thermistor sec_thermistor.23: sec_therm_probe: fail to get iio channel
<6>[ 2.261624] [c7] platform sec_thermistor.23: Driver sec-thermistor requests probe deferral
<6>[ 2.263005] [c5] sec_touchkey_driver 3-0020: touchkey_power_on: off
<6>[ 2.273942] TRIMINFO[0] = 0x80682d
<6>[ 2.273963] [c7] TMU_CONTROL[0] = 0x10609803
<6>[ 2.273979] [c7] CURRENT_TEMP[0] = 0x36
<6>[ 2.273994] [c7] THRESHOLD_TEMP_RISE[0] = 0x87786e64
<6>[ 2.274009] [c7] THRESHOLD_TEMP_FALL[0] = 0x85766c62
<6>[ 2.274024] [c7] INTEN[0] = 0x11111111
<6>[ 2.274039] [c7] INTCLEAR[0] = 0x0
<6>[ 2.285862] [c7] TRIMINFO[1] = 0x80682d
<6>[ 2.285879] [c7] TMU_CONTROL[1] = 0x10609803
<6>[ 2.285894] [c7] CURRENT_TEMP[1] = 0x38
<6>[ 2.285909] [c7] THRESHOLD_TEMP_RISE[1] = 0x87786e64
<6>[ 2.285924] [c7] THRESHOLD_TEMP_FALL[1] = 0x85766c62
<6>[ 2.285939] [c7] INTEN[1] = 0x11111111
<6>[ 2.285953] [c7] INTCLEAR[1] = 0x0
<6>[ 2.297787] [c7] TRIMINFO[2] = 0x80652b
<6>[ 2.297803] [c7] TMU_CONTROL[2] = 0x10609803
<6>[ 2.297818] [c7] CURRENT_TEMP[2] = 0x3b
<6>[ 2.297832] [c7] THRESHOLD_TEMP_RISE[2] = 0x87786e64
<6>[ 2.297847] [c7] THRESHOLD_TEMP_FALL[2] = 0x85766c62
<6>[ 2.297861] [c7] INTEN[2] = 0x11111111
<6>[ 2.297875] [c7] INTCLEAR[2] = 0x0
<6>[ 2.309694] [c7] TRIMINFO[3] = 0x80682d
<6>[ 2.309711] [c7] TMU_CONTROL[3] = 0x10609803
<6>[ 2.309726] [c7] CURRENT_TEMP[3] = 0x36
<6>[ 2.309741] [c7] THRESHOLD_TEMP_RISE[3] = 0x87786e64
<6>[ 2.309756] [c7] THRESHOLD_TEMP_FALL[3] = 0x85766c62
<6>[ 2.309771] [c7] INTEN[3] = 0x11111111
<6>[ 2.309784] [c7] INTCLEAR[3] = 0x0
<6>[ 2.318055] [c5] sec_touchkey_driver 3-0020: touchkey_power_on: on
<6>[ 2.321655] TRIMINFO[4] = 0x80682d
<6>[ 2.321672] [c7] TMU_CONTROL[4] = 0x10609803
<6>[ 2.321687] [c7] CURRENT_TEMP[4] = 0x31
<6>[ 2.321702] [c7] THRESHOLD_TEMP_RISE[4] = 0x85766c62
<6>[ 2.321716] [c7] THRESHOLD_TEMP_FALL[4] = 0x83746a60
<6>[ 2.321731] [c7] INTEN[4] = 0x11111111
<6>[ 2.321745] [c7] INTCLEAR[4] = 0x0
<6>[ 2.323413] [c7] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
<6>[ 2.324973] [c7] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
<6>[ 2.325763] [c7] [BT] bcm4354_bluetooth_probe.
<7>[ 2.325796] [c7] of_get_named_gpio_flags exited with status 156
<7>[ 2.325823] [c7] of_get_named_gpio_flags exited with status 34
<7>[ 2.325850] [c7] of_get_named_gpio_flags exited with status 25
<6>[ 2.326383] [c7] [BT] bcm4354_bluetooth_probe End
<6>[ 2.326666] [c7] CPUFREQ of CA7 L0 : 1300000 uV
<6>[ 2.326683] [c7] CPUFREQ of CA7 L0 : ABB 255
<6>[ 2.326698] [c7] CPUFREQ of CA7 L1 : 1262500 uV
<6>[ 2.326711] [c7] CPUFREQ of CA7 L1 : ABB 255
<6>[ 2.326725] [c7] CPUFREQ of CA7 L2 : 1187500 uV
<6>[ 2.326739] [c7] CPUFREQ of CA7 L2 : ABB 255
<6>[ 2.326752] [c7] CPUFREQ of CA7 L3 : 1137500 uV
<6>[ 2.326765] [c7] CPUFREQ of CA7 L3 : ABB 255
<6>[ 2.326779] [c7] CPUFREQ of CA7 L4 : 1087500 uV
<6>[ 2.326792] [c7] CPUFREQ of CA7 L4 : ABB 255
<6>[ 2.326806] [c7] CPUFREQ of CA7 L5 : 1050000 uV
<6>[ 2.326819] [c7] CPUFREQ of CA7 L5 : ABB 255
<6>[ 2.326832] [c7] CPUFREQ of CA7 L6 : 1012500 uV
<6>[ 2.326844] [c7] CPUFREQ of CA7 L6 : ABB 255
<6>[ 2.326857] [c7] CPUFREQ of CA7 L7 : 975000 uV
<6>[ 2.326870] [c7] CPUFREQ of CA7 L7 : ABB 255
<6>[ 2.326883] [c7] CPUFREQ of CA7 L8 : 937500 uV
<6>[ 2.326896] [c7] CPUFREQ of CA7 L8 : ABB 255
<6>[ 2.326910] [c7] CPUFREQ of CA7 L9 : 900000 uV
<6>[ 2.326922] [c7] CPUFREQ of CA7 L9 : ABB 255
<6>[ 2.326936] [c7] CPUFREQ of CA7 L10 : 900000 uV
<6>[ 2.326949] [c7] CPUFREQ of CA7 L10 : ABB 255
<6>[ 2.326962] [c7] CPUFREQ of CA7 L11 : 900000 uV
<6>[ 2.326975] [c7] CPUFREQ of CA7 L11 : ABB 255
<6>[ 2.326989] [c7] CPUFREQ of CA7 L12 : 900000 uV
<6>[ 2.327002] [c7] CPUFREQ of CA7 L12 : ABB 255
<6>[ 2.327015] [c7] CPUFREQ of CA7 L13 : 900000 uV
<6>[ 2.327028] [c7] CPUFREQ of CA7 L13 : ABB 255
<6>[ 2.327042] [c7] CPUFREQ of CA7 L14 : 900000 uV
<6>[ 2.327055] [c7] CPUFREQ of CA7 L14 : ABB 255
<6>[ 2.327323] [c7] kfc clock[800000], mx_mspll clock[666000]
<6>[ 2.327348] [c7] [SET_EMA_TEST] volt : 887500 value : 0x44
<6>[ 2.327363] [c7] [SET_EMA_TEST] volt : 937500 value : 0x44
<6>[ 2.327377] [c7] [SET_EMA_TEST] volt : 1032500 value : 0x33
<6>[ 2.327392] [c7] [SET_EMA_TEST] volt : 1142500 value : 0x11
<6>[ 2.327405] [c7] [SET_EMA_TEST] volt : 1167500 value : 0x11
<6>[ 2.327420] [c7] CPUFREQ of CA15 L0 : 1362500 uV
<6>[ 2.327435] [c7] CPUFREQ of CA15 L0 : ABB 255
<6>[ 2.327449] [c7] CPUFREQ of CA15 L1 : 1362500 uV
<6>[ 2.327462] [c7] CPUFREQ of CA15 L1 : ABB 255
<6>[ 2.327475] [c7] CPUFREQ of CA15 L2 : 1362500 uV
<6>[ 2.327488] [c7] CPUFREQ of CA15 L2 : ABB 255
<6>[ 2.327501] [c7] CPUFREQ of CA15 L3 : 1275000 uV
<6>[ 2.327514] [c7] CPUFREQ of CA15 L3 : ABB 255
<6>[ 2.327527] [c7] CPUFREQ of CA15 L4 : 1237500 uV
<6>[ 2.327540] [c7] CPUFREQ of CA15 L4 : ABB 255
<6>[ 2.327554] [c7] CPUFREQ of CA15 L5 : 1162500 uV
<6>[ 2.327567] [c7] CPUFREQ of CA15 L5 : ABB 255
<6>[ 2.327580] [c7] CPUFREQ of CA15 L6 : 1112500 uV
<6>[ 2.327593] [c7] CPUFREQ of CA15 L6 : ABB 255
<6>[ 2.327606] [c7] CPUFREQ of CA15 L7 : 1075000 uV
<6>[ 2.327619] [c7] CPUFREQ of CA15 L7 : ABB 255
<6>[ 2.327632] [c7] CPUFREQ of CA15 L8 : 1037500 uV
<6>[ 2.327645] [c7] CPUFREQ of CA15 L8 : ABB 255
<6>[ 2.327658] [c7] CPUFREQ of CA15 L9 : 1000000 uV
<6>[ 2.327671] [c7] CPUFREQ of CA15 L9 : ABB 255
<6>[ 2.327684] [c7] CPUFREQ of CA15 L10 : 975000 uV
<6>[ 2.327697] [c7] CPUFREQ of CA15 L10 : ABB 255
<6>[ 2.327710] [c7] CPUFREQ of CA15 L11 : 962500 uV
<6>[ 2.327724] [c7] CPUFREQ of CA15 L11 : ABB 255
<6>[ 2.327736] [c7] CPUFREQ of CA15 L12 : 937500 uV
<6>[ 2.327750] [c7] CPUFREQ of CA15 L12 : ABB 255
<6>[ 2.327763] [c7] CPUFREQ of CA15 L13 : 912500 uV
<6>[ 2.327776] [c7] CPUFREQ of CA15 L13 : ABB 255
<6>[ 2.327790] [c7] CPUFREQ of CA15 L14 : 900000 uV
<6>[ 2.327803] [c7] CPUFREQ of CA15 L14 : ABB 255
<6>[ 2.327816] [c7] CPUFREQ of CA15 L15 : 900000 uV
<6>[ 2.327829] [c7] CPUFREQ of CA15 L15 : ABB 255
<6>[ 2.327842] [c7] CPUFREQ of CA15 L16 : 900000 uV
<6>[ 2.327855] [c7] CPUFREQ of CA15 L16 : ABB 255
<6>[ 2.327868] [c7] CPUFREQ of CA15 L17 : 900000 uV
<6>[ 2.327882] [c7] CPUFREQ of CA15 L17 : ABB 255
<6>[ 2.327895] [c7] CPUFREQ of CA15 L18 : 900000 uV
<6>[ 2.327908] [c7] CPUFREQ of CA15 L18 : ABB 255
<6>[ 2.327921] [c7] CPUFREQ of CA15 L19 : 900000 uV
<6>[ 2.327969] [c7] CPUFREQ of CA15 L19 : ABB 255
<6>[ 2.327984] [c7] CPUFREQ of CA15 L20 : 900000 uV
<6>[ 2.327998] [c7] CPUFREQ of CA15 L20 : ABB 255
<6>[ 2.328011] [c7] CPUFREQ of CA15 L21 : 900000 uV
<6>[ 2.328024] [c7] CPUFREQ of CA15 L21 : ABB 255
<6>[ 2.328037] [c7] CPUFREQ of CA15 L22 : 900000 uV
<6>[ 2.328050] [c7] CPUFREQ of CA15 L22 : ABB 255
<6>[ 2.328385] [c7] eagle clock[800000], mpll clock[800000]
<6>[ 2.332171] [c7] Exynos: Kernel Thermal management registered
<6>[ 2.332194] [c7] cpuidle: using governor ladder
<6>[ 2.332210] [c7] cpuidle: using governor menu
<6>[ 2.332422] [c7] Synopsys Designware Multimedia Card Interface Driver
<6>[ 2.333001] [c6] sec_touchkey_driver 3-0020: touchkey_led_power_on: on
<6>[ 2.333610] dwmmc_exynos 12200000.dwmmc0: Clock pin control Pin:gpc0-0 Addr:13410000.pinctrl Val:3 Num:4
<6>[ 2.333823] dwmmc_exynos 12200000.dwmmc0: Using internal DMA controller.
<6>[ 2.333846] [c7] dwmmc_exynos 12200000.dwmmc0: FIFOTH: 0x 300f0030
<6>[ 2.333863] dwmmc_exynos 12200000.dwmmc0: Version ID is 250a
<6>[ 2.334144] [c7] dwmmc_exynos 12200000.dwmmc0: DW MMC controller at irq 107, 64 bit host data width, 64 deep fifo
<6>[ 2.334591] [c7] mmc_host mmc0: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
<6>[ 2.368108] [c7] dw_mci_transferred_cnt_init: trans_count: successed.....
<6>[ 2.368142] [c7] dwmmc_exynos 12200000.dwmmc0: 1 slots initialized
<6>[ 2.368171] [c7] mmc_host mmc0: card inserted
<6>[ 2.368575] [c7] dwmmc_exynos 12210000.dwmmc1: TP table info LV 0
<6>[ 2.368597] [c7] dwmmc_exynos 12210000.dwmmc1: Range: 18000000 MIF: 825000 CPU: 2000000 KFC: 1500000
<6>[ 2.368614] [c7] dwmmc_exynos 12210000.dwmmc1: TP table info LV 1
<6>[ 2.368632] [c7] dwmmc_exynos 12210000.dwmmc1: Range: 12000000 MIF: 413000 CPU: 0 KFC: 0
<6>[ 2.368649] [c7] dwmmc_exynos 12210000.dwmmc1: TP table info LV 2
<6>[ 2.368666] [c7] dwmmc_exynos 12210000.dwmmc1: Range: 0 MIF: 0 CPU: 0 KFC: 0
<6>[ 2.368724] [c7] dwmmc_exynos 12210000.dwmmc1: Clock pin control Pin:gpc1-0 Addr:13410000.pinctrl Val:3 Num:4
<6>[ 2.368902] dwmmc_exynos 12210000.dwmmc1: Using internal DMA controller.
<6>[ 2.368925] [c7] dwmmc_exynos 12210000.dwmmc1: FIFOTH: 0x 300f0030
<6>[ 2.368941] dwmmc_exynos 12210000.dwmmc1: Version ID is 250a
<6>[ 2.369239] [c7] dwmmc_exynos 12210000.dwmmc1: DW MMC controller at irq 108, 64 bit host data width, 64 deep fifo
<6>[ 2.369820] [c7] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
<6>[ 2.398108] [c7] dw_mci_transferred_cnt_init: trans_count: successed.....
<6>[ 2.398142] [c7] dwmmc_exynos 12210000.dwmmc1: 1 slots initialized
<7>[ 2.398684] [c7] of_get_named_gpio_flags exited with status 28
<7>[ 2.398712] [c7] of_get_named_gpio_flags exited with status 87
<7>[ 2.398734] [c7] of_get_named_gpio_flags exited with status 94
<6>[ 2.398768] [c7] dwmmc_exynos 12220000.dwmmc2: Clock pin control Pin:gpc2-0 Addr:13410000.pinctrl Val:1 Num:4
<6>[ 2.398931] dwmmc_exynos 12220000.dwmmc2: Using internal DMA controller.
<6>[ 2.398952] [c7] dwmmc_exynos 12220000.dwmmc2: FIFOTH: 0x 300f0030
<6>[ 2.398969] dwmmc_exynos 12220000.dwmmc2: Version ID is 250a
<6>[ 2.399272] [c7] dwmmc_exynos 12220000.dwmmc2: DW MMC controller at irq 109, 64 bit host data width, 64 deep fifo
<6>[ 2.399392] [c7] mmc2: vmmc regulator found
<6>[ 2.399612] [c7] mmc2: vqmmc regulator found
<6>[ 2.400179] [c7] mmc_host mmc2: Bus speed (slot 0) = 20812500Hz (slot req 400000Hz, actual 385416HZ div = 27)
<6>[ 2.421354] [c4] mmc0: BKOPS_EN bit is not set
<3>[ 2.423931] [c6] sec_touchkey_driver 3-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x0, failed.
<6>[ 2.431651] [c4] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 400000Hz, actual 398325HZ div = 209)
<6>[ 2.431693] [c4] mmc_host mmc0: Bus speed (slot 0) = 166500000Hz (slot req 166500000Hz, actual 166500000HZ div = 0)
<6>[ 2.431784] [c4] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 166500000Hz, actual 166500000HZ div = 1)
<6>[ 2.431819] [c4] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 200000000Hz, actual 166500000HZ div = 1)
<6>[ 2.431854] [c4] dwmmc_exynos 12200000.dwmmc0: Tuning Abnormal_result 0x0000ffff.
<6>[ 2.433119] [c7] dw_mci_transferred_cnt_init: trans_count: successed.....
<4>[ 2.433323] [c7] dwmmc_exynos 12220000.dwmmc2: success to request irq for card detect.
<6>[ 2.433343] [c7] wake enabled for irq 715
<6>[ 2.433452] [c4] dwmmc_exynos 12200000.dwmmc0: sample_good: 0x ffff best_sample: 0x ffffffff
<6>[ 2.433472] [c4] dwmmc_exynos 12200000.dwmmc0: Clock GPIO Drive Strength Value: 0x2
<6>[ 2.433677] [c7] dwmmc_exynos 12220000.dwmmc2: 1 slots initialized
<6>[ 2.433715] [c7] dwmmc_exynos 12220000.dwmmc2: vqmmc_en is low.
<6>[ 2.433745] [c7] dwmmc_exynos 12220000.dwmmc2: vmmc_en is low.
<3>[ 2.434184] [c0] dwmmc_exynos 12200000.dwmmc0: Start bit error (status=00002000)
<6>[ 2.434266] [c4] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
<6>[ 2.434838] [c7] of_lp5562_parsing_dt
<3>[ 2.435057] [c0] dwmmc_exynos 12200000.dwmmc0: Start bit error (status=00002000)
<6>[ 2.435135] [c4] mmc_host mmc0: Tuning error: cmd.error:0, data.error:-5
<6>[ 2.435266] [c4] dwmmc_exynos 12200000.dwmmc0: divratio: 1 map: 0x 0000bfbf
<6>[ 2.435288] [c4] dwmmc_exynos 12200000.dwmmc0: sample_good: 0x bfbf best_sample: 0x 0b
<6>[ 2.435321] [c4] dwmmc_exynos 12200000.dwmmc0: CLKSEL = 0x01420045, EN_SHIFT = 0x00000000, DS(3) = 0x3.
<6>[ 2.435560] [c4] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 200000000Hz, actual 41625000HZ div = 0)
<6>[ 2.435605] [c4] mmc_host mmc0: Bus speed (slot 0) = 41625000Hz (slot req 41625000Hz, actual 41625000HZ div = 0)
<6>[ 2.435959] [c4] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 41625000Hz, actual 41625000HZ div = 4)
<6>[ 2.435999] [c4] mmc_host mmc0: Bus speed (slot 0) = 333000000Hz (slot req 200000000Hz, actual 166500000HZ div = 1)
<6>[ 2.436269] [c4] mmc0: new HS200-DDR MMC card at address 0001
<6>[ 2.436992] [c4] mmcblk0: mmc0:0001 V3W00M 14.6 GiB
<6>[ 2.437267] [c4] mmcblk0boot0: mmc0:0001 V3W00M partition 1 4.00 MiB
<6>[ 2.437540] [c4] mmcblk0boot1: mmc0:0001 V3W00M partition 2 4.00 MiB
<6>[ 2.437804] [c4] mmcblk0rpmb: mmc0:0001 V3W00M partition 3 512 KiB
<6>[ 2.441906] [c4] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
<6>[ 2.451907] [c4] mmcblk0boot1: unknown partition table
<6>[ 2.453412] [c4] mmcblk0boot0: unknown partition table
<6>[ 2.455716] [c4] dwmmc_exynos 12220000.dwmmc2: vmmc off, vqmmc on.
<6>[ 2.458187] [c7] lp5562_post_init_device
<6>[ 2.461174] [c6] sec_touchkey_driver 3-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[ 2.461214] [c6] sec_touchkey_driver 3-0020: f/w ver = 0X1D, module ver = 0X6
<6>[ 2.465843] [c7] lp55xx_init_device: done
<6>[ 2.466146] [c7] lp5562_set_led_current
<6>[ 2.467127] [c7] lp5562_set_led_current
<6>[ 2.468186] [c7] lp5562_set_led_current
<6>[ 2.469172] [c7] lp5562_set_led_current
<6>[ 2.470172] [c7] lp5562_probe: done
<6>[ 2.470862] [c7] of_max77804_torch_dt failed to get a timer
<6>[ 2.470881] [c7] of_max77804_torch_dt failed to get a timer_mode
<6>[ 2.470900] [c7] [LED] max77804_led_probe 2 leds
<6>[ 2.470915] [c7] max77804_led_probe led0 setup ...
<6>[ 2.472420] [c7] max77804_led_probe led1 setup ...
<6>[ 2.474635] [c7] platform arizona-extcon: Driver arizona-extcon requests probe deferral
<6>[ 2.475241] [c7] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 2.487093] [c7] Successfully registered hid_synaptics_driver
<6>[ 2.487318] [c7] usbcore: registered new interface driver usbhid
<6>[ 2.487334] [c7] usbhid: USB HID core driver
<6>[ 2.488651] [c7] ashmem: initialized
<6>[ 2.489035] [c7] logger: created 2048K log 'log_main'
<6>[ 2.489053] [c7] sec_getlog_supply_loggerinfo: log_main, 0xed000000
<6>[ 2.489405] [c7] logger: created 256K log 'log_events'
<6>[ 2.489423] [c7] sec_getlog_supply_loggerinfo: log_events, 0xed740000
<6>[ 2.489800] [c7] logger: created 2048K log 'log_radio'
<6>[ 2.489818] [c7] sec_getlog_supply_loggerinfo: log_radio, 0xed200000
<6>[ 2.490168] [c7] logger: created 256K log 'log_system'
<6>[ 2.490186] [c7] sec_getlog_supply_loggerinfo: log_system, 0xed780000
<7>[ 2.493488] [c7] of_get_named_gpio_flags exited with status 16
<7>[ 2.493893] [c7] of_get_named_gpio_flags exited with status 14
<6>[ 2.494267] [c7] gps_geofence_wake_init misc register, name gps_geofence_wake, irq 717, host req pin num 14
<6>[ 2.494753] [c7] wake enabled for irq 717
<6>[ 2.494777] [c7] (NULL device *): sec_fuelgauge_init:
<6>[ 2.494969] [c7] sec-fuelgauge 7-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loading
<7>[ 2.494998] [c7] of_get_named_gpio_flags exited with status 21
<6>[ 2.495028] [c7] fuelgauge_parse_dt fg_irq: 21, capacity_max: 990
<6>[ 2.495028] cpacity_max_margin: 30, capacity_min: 0
<6>[ 2.495028] calculation_type: 0x1c, fuel_alert_soc: 2,
<6>[ 2.495028] repeated_fuelalert: 1
<3>[ 2.495059] [c7] max17048_parse_dt value 93
<3>[ 2.495075] [c7] max17048_parse_dt value 93
<6>[ 2.495102] [c7] max17048_parse_dt RCOMP0: 0x5d, RCOMP_charging: 0x5d, temp_cohot: -175,temp_cocold: -5825, is_using_model_data: 1, type_str: SDI,
<6>[ 2.495116] [c7] sec_hal_fg_init
<6>[ 2.496383] [c7] sec-fuelgauge 7-0036: MAX17048 Fuel-Gauge Ver 0x0012
<3>[ 2.499195] [c7] max17048_get_current: Fail to get psy (sec-charger)
<3>[ 2.499217] [c7] max17048_get_current_average: Fail to get psy (sec-charger)
<3>[ 2.499233] [c7] max17048_get_current_average: Fail to get psy (battery)
<7>[ 2.502921] [c7] sec-fuelgauge 7-0036: sec_fg_get_scaled_capacity: scaled capacity (88.2)
<3>[ 2.502989] [c7] sec-fuelgauge 7-0036: sec_fg_get_atomic_capacity: capacity (old 0 : new 1)
<3>[ 2.505080] [c7] max17048_get_current: Fail to get psy (sec-charger)
<3>[ 2.505103] [c7] max17048_get_current_average: Fail to get psy (sec-charger)
<3>[ 2.505120] [c7] max17048_get_current_average: Fail to get psy (battery)
<6>[ 2.508298] [c4] wake enabled for irq 718
<7>[ 2.508907] [c7] sec-fuelgauge 7-0036: sec_fg_get_scaled_capacity: scaled capacity (88.2)
<3>[ 2.508928] [c7] sec-fuelgauge 7-0036: sec_fg_get_atomic_capacity: capacity (old 0 : new 1)
<6>[ 2.511232] [c4] sec-fuelgauge 7-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loaded
<6>[ 2.511522] [c4] func:max77804_charger_init
<6>[ 2.511797] [c4] max77804_charger_probe: MAX77804 Charger driver probe
<6>[ 2.513311] [c4] max77804_charger_initialize: battery cv voltage 0xdf
<6>[ 2.513475] [c4] max77804_charger_probe: device found: ver.0x4
<6>[ 2.513917] [c4] max77804_get_charger_state: CHG_DTLS : 0x 1
<6>[ 2.514089] [c4] max77804_get_health_state: reg_data(0x3)
<3>[ 2.514108] [c4] max77804_get_health_state: Fail to get psy (battery)
<6>[ 2.514271] [c4] max77804_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
<6>[ 2.514579] max77804_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[ 2.514900] [c4] max77804_get_input_current: CHG_CNFG_09(0x13)
<3>[ 2.514926] [c4] power_supply sec-charger: driver failed to report `charge_otg_control' property: -22
<6>[ 2.515182] [c4] max77804_get_charger_state: CHG_DTLS : 0x 1
<6>[ 2.515351] [c4] max77804_get_health_state: reg_data(0x3)
<3>[ 2.515370] [c4] max77804_get_health_state: Fail to get psy (battery)
<6>[ 2.515532] [c4] max77804_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
<6>[ 2.515838] max77804_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[ 2.516156] [c4] max77804_get_input_current: CHG_CNFG_09(0x13)
<3>[ 2.516181] [c4] power_supply sec-charger: driver failed to report `charge_otg_control' property: -22
<6>[ 2.518828] [c4] [VIB] ++ max77804_haptic_probe
<4>[ 2.518846] [c4] of_max77804_haptic_dt : start dt parsing
<4>[ 2.518940] [c4] of_max77804_haptic_dt : max_timeout = 10000
<4>[ 2.518955] [c4] of_max77804_haptic_dt : duty = 32047
<4>[ 2.518968] [c4] of_max77804_haptic_dt : period = 33500
<4>[ 2.518981] [c4] of_max77804_haptic_dt : reg2 = 130
<4>[ 2.518995] [c4] of_max77804_haptic_dt : pwm_id = 0
<4>[ 2.519008] [c4] of_max77804_haptic_dt : regulator_name = vcc_3.0v_motor
<6>[ 2.519454] [c4] [VIB] DEV NAME max77804-haptic 66600000
<3>[ 2.520496] [c4] exynos-adc 12d10000.adc: operating without regulator vdd[-19]
<6>[ 2.521019] [c4] exynos-adc 12d10000.adc: Probed successfully driver.
<6>[ 2.521510] [c4] mckernelapi : Mobicore API module initialized!
<6>[ 2.521557] [c4] MobiCore mcd: MobiCore Driver, Build: Thu May 21 10:45:52 2015
<6>[ 2.521573] [c4] MobiCore mcd: MobiCore mcDrvModuleApi version is 1.1
<6>[ 2.521588] [c4] MobiCore mcd: MobiCore *** t-base-300-Ares-2-Android-V004_P3 ###
<6>[ 2.522690] [c4] vfsspi_init
<6>[ 2.523290] [c4] vfsspi_probe
<7>[ 2.523318] [c4] of_get_named_gpio_flags exited with status 70
<6>[ 2.523333] [c4] vfsspi_parse_dt: sleepPin=70
<7>[ 2.523352] [c4] of_get_named_gpio_flags exited with status 37
<6>[ 2.523366] [c4] vfsspi_parse_dt: drdyPin=37
<3>[ 2.523381] [c4] vfsspi_parse_dt: not set ocp_pin in dts
<6>[ 2.523395] [c4] vfsspi_parse_dt: ocp_pin=0
<7>[ 2.523417] [c4] of_get_named_gpio_flags exited with status 114
<6>[ 2.523431] [c4] vfsspi_parse_dt: ocp_en=114
<7>[ 2.523450] [c4] of_get_named_gpio_flags exited with status 101
<6>[ 2.523464] [c4] vfsspi_parse_dt: ldo_pin=101
<3>[ 2.523479] [c4] vfsspi_parse_dt: not set ldo2 in dts
<6>[ 2.523495] [c4] vfsspi_parse_dt: ldocontrol=1
<6>[ 2.523510] [c4] vfsspi_parse_dt: orient=1
<6>[ 2.523527] [c4] vfsspi_platformInit
<6>[ 2.523551] [c4] vfsspi_platformInit ocp off
<6>[ 2.523573] [c4] vfsspi_platformInit ldo off
<6>[ 2.523714] [c4] vfsspi_disable_irq
<6>[ 2.523735] [c4] vfsspi_platformInit drdy value =0
<6>[ 2.523735] vfsspi_platformInit sleep value =0
<6>[ 2.523735] vfsspi_platformInit ldo en value =0
<6>[ 2.523757] [c4] vfsspi_platformInit vfsspi_platofrminit, status=0
<6>[ 2.527226] [c4] vfsspi_regulator_onoff: on ocp_en: enable
<6>[ 2.533397] [c4] vfsspi_hardReset
<6>[ 2.558285] [c4] ValiditySensor: spi_sync returned 0
<6>[ 2.558303] [c4] vfsspi_probe sensor type is RAPTOR
<6>[ 2.558354] [c4] vfsspi_regulator_onoff: off ocp_en: enable
<6>[ 2.558819] [c4] vfsspi_probe success...
<6>[ 2.559052] [c4] vfsspi_init init is successful
<6>[ 2.559239] [c4] [SSP] ssp_probe, is called
<7>[ 2.559264] [c4] of_get_named_gpio_flags exited with status 35
<7>[ 2.559283] [c4] of_get_named_gpio_flags exited with status 36
<7>[ 2.559302] [c4] of_get_named_gpio_flags exited with status 32
<7>[ 2.559332] [c4] of_get_named_gpio_flags exited with status 149
<6>[ 2.559353] [c4] [SSP] acc-posi[6] mag-posi[6]
<6>[ 2.559403] [c4] [SSP] No static matrix at DT for YAS532!( (null))
<6>[ 2.559443] [c4]
<6>[ 2.559443] #####################################################
<6>[ 2.563392] [c4] input: light_sensor as /devices/virtual/input/input3
<6>[ 2.564103] [c4] input: proximity_sensor as /devices/virtual/input/input4
<6>[ 2.564794] [c4] input: temp_humidity_sensor as /devices/virtual/input/input5
<6>[ 2.565506] [c4] input: gesture_sensor as /devices/virtual/input/input6
<6>[ 2.566193] [c4] input: sig_motion_sensor as /devices/virtual/input/input7
<6>[ 2.566883] [c4] input: step_cnt_sensor as /devices/virtual/input/input8
<6>[ 2.567585] [c4] input: meta_event as /devices/virtual/input/input9
<6>[ 2.568130] [c4] [SSP]: requesting IRQ 720
<6>[ 2.570946] [c5] [SSP] initialize_mobeam
<6>[ 2.643436] [c5] input: ssp_context as /devices/virtual/input/input10
<6>[ 2.644327] [c5] [SSP] ssp_enable, enable = 1, old enable = 1
<6>[ 2.644351] [c5] wake enabled for irq 720
<6>[ 2.650653] [c5] [SSP] MCU Firm Rev : Old = 15041500, New = 15041500
<6>[ 2.656906] [c5] [SSP] MCU device ID = 85, reading ID = 85
<6>[ 2.663182] [c5] [SSP] Sensor Posision A : 6, G : 6, M: 6, P: 0
<6>[ 2.669371] [c5] [SSP] FUSE ROM Data 6 , 6, 6
<3>[ 2.675532] [c5] [SSP]: state: 000111111111011111111
<6>[ 2.681694] [c5] [SSP]: set_static_matrix: finished
<6>[ 2.687865] [c5] [SSP] MCU Firm Rev : New = 15041500
<6>[ 2.694025] [c5] [SSP]: ssp_send_cmd - command 0xdc 0
<6>[ 2.694034] [c5] [SSP]: ssp_probe - probe success!
<6>[ 2.694043] [c5] #####################################################
<6>[ 2.694043]
<6>[ 2.694352] [c5] max86900_probe - start
<7>[ 2.694366] [c5] of_get_named_gpio_flags exited with status 33
<6>[ 2.694460] [c5] max86900_regulator_onoff - onoff = 1
<6>[ 2.696558] [c5] max86900_probe - MAX86900 OS21(0x57), REV ID : 0x05
<6>[ 2.696776] [c5] input: hrm_sensor as /devices/virtual/input/input11
<6>[ 2.698211] [c5] max86900_init_device done, part_type = 3
<6>[ 2.698296] [c5] max86900_regulator_onoff - onoff = 0
<6>[ 2.698819] [c5] max86900_probe success
<6>[ 2.699423] [c5] usbcore: registered new interface driver snd-usb-audio
<6>[ 2.701352] [c5] lpass_register_subip: i2s(ee30a010) registered
<6>[ 2.704734] [c5] wake enabled for irq 512
<4>[ 3.189997] [c5] florida-codec florida-codec: ASoC: Failed to create platform debugfs directory
<6>[ 3.215716] [c5] pacific-audio sound.21: florida-aif1 <-> 3830000.i2s mapping ok
<6>[ 3.216030] [c5] pacific-audio sound.21: florida-aif2 <-> pacific-ext voice call mapping ok
<6>[ 3.216312] [c5] pacific-audio sound.21: florida-aif3 <-> pacific-ext bluetooth sco mapping ok
<6>[ 3.216606] [c5] pacific-audio sound.21: florida-aif1 <-> samsung-i2s-sec mapping ok
<6>[ 3.216837] [c5] compress asoc: florida-dsp-voicectrl <-> florida-cpu-voicectrl mapping ok
<6>[ 3.217042] [c5] compress asoc: florida-dsp-trace <-> florida-cpu-trace mapping ok
<7>[ 3.218344] [c5] of_get_named_gpio_flags exited with status 6
<6>[ 3.218368] [c5] florida-codec florida-codec: pacific_update_impedance_table: shift = 0
<6>[ 3.218953] [c5] input: voicecontrol as /devices/sound.21/input/input12
<6>[ 3.222242] [c5] GACT probability NOT on
<6>[ 3.222257] [c5] Mirror/redirect action on
<6>[ 3.222266] [c5] u32 classifier
<6>[ 3.222274] [c5] Actions configured
<6>[ 3.222284] [c5] Netfilter messages via NETLINK v0.30.
<6>[ 3.222335] [c5] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[ 3.222991] [c5] ctnetlink v0.93: registering with nfnetlink.
<6>[ 3.223057] [c5] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 3.223066] [c5] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 3.223733] [c5] xt_time: kernel timezone is -0000
<6>[ 3.223923] [c5] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.224073] [c5] arp_tables: (C) 2002 David S. Miller
<6>[ 3.224112] [c5] TCP: cubic registered
<6>[ 3.224120] [c5] Initializing XFRM netlink socket
<6>[ 3.224902] [c5] NET: Registered protocol family 10
<6>[ 3.225339] [c5] mip6: Mobile IPv6
<6>[ 3.225367] [c5] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.225490] [c5] sit: IPv6 over IPv4 tunneling driver
<6>[ 3.226951] [c5] NET: Registered protocol family 17
<6>[ 3.226976] [c5] NET: Registered protocol family 15
<6>[ 3.226987] [c5] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 3.227001] [c5] Bluetooth: HIDP socket layer initialized
<6>[ 3.227022] [c5] NET: Registered protocol family 35
<6>[ 3.227486] [c5] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
<5>[ 3.227521] [c5] Registering SWP/SWPB emulation handler
<6>[ 3.227534] [c5] SRAM ASV group [7] : MIF(900000), G3D(925000)
<6>[ 3.234216] [c5] zswap: loading zswap
<6>[ 3.234367] [c5] zswap: using lzo compressor
<6>[ 3.235113] [c5] PM DOMAIN: spd-fimd, Device : 14400000.fimd_fb Registered
<6>[ 3.235130] [c5] s5p-decon-display 14400000.fimd_fb: exynos-iommu gpd_dev_ops inserted!
<6>[ 3.235469] [c5] parse_display_driver_dt: decon_driver.regs 14400000 dsi_driver.regs 14500000
<7>[ 3.235593] [c5] of_get_named_gpio_flags exited with status 4
<7>[ 3.235614] [c5] of_get_named_gpio_flags exited with status 95
<7>[ 3.235638] [c5] of_get_named_gpio_flags exited with status 193
<6>[ 3.236844] [c5] init_display_decon_clocks: pixel_clk_rate: 133000000
<6>[ 3.236870] [c5] init_display_decon_clocks: aclk200_clk_rate: 200000000
<6>[ 3.236893] [c5] init_display_decon_clocks: aclk300_clk_rate: 300000000
<6>[ 3.236915] [c5] init_display_decon_clocks: aclk400_clk_rate: 300000000
<6>[ 3.236940] [c5] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<6>[ 3.236949] [c5] s5p-decon-display 14400000.fimd_fb: MIC driver has been probed
<6>[ 3.254822] [c5] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_clear_rx_fifo : rx_fifo 0x388C8000
<6>[ 3.255775] [c6] s5p-decon-display 14400000.fimd_fb: rx fifo : 1600031c, response : 1c, rx_size : 3
<6>[ 3.255915] [c6] s5p-decon-display 14400000.fimd_fb: rx fifo : 2f00061c, response : 1c, rx_size : 6
<6>[ 3.256032] [c6] s5p-decon-display 14400000.fimd_fb: rx fifo : 2900051c, response : 1c, rx_size : 5
<6>[ 3.256111] [c6] s5p-decon-display 14400000.fimd_fb: rx fifo : 3300041c, response : 1c, rx_size : 4
<6>[ 3.256273] [c6] s5p-decon-display 14400000.fimd_fb: rx fifo : 3900571c, response : 1c, rx_size : 87
<6>[ 3.256375] [c6] s5p-decon-display 14400000.fimd_fb: rx fifo : f00151c, response : 1c, rx_size : 21
<6>[ 3.256454] [c6] s5p-decon-display 14400000.fimd_fb: rx fifo : 2f00061c, response : 1c, rx_size : 6
<6>[ 3.256489] [c6] lcd panel: ID: 62, 28, 13
<6>[ 3.257005] [c6] Dynamic Aid Finished !
<6>[ 3.257117] [c6] Dynamic Aid Finished !
<6>[ 3.257195] [c6] Dynamic Aid Finished !
<7>[ 3.257242] [c6] of_get_named_gpio_flags exited with status 194
<6>[ 3.257349] [c6] s5p-decon-display 14400000.fimd_fb: s6e3fa2_err_fg_init : err_fg(0)
<6>[ 3.257550] [c6] lcd panel: acl: 0, auto_brightness: 0
<6>[ 3.257584] [c6] lcd panel: temperature: 25, tset: 25
<6>[ 3.257617] [c6] lcd panel: brightness=133, bl=52, candela=172
<6>[ 3.258210] [c6] mdnie mdnie: STANDARD_UI
<6>[ 3.258221] [c6] mdnie mdnie: registered successfully
<6>[ 3.258230] [c6] lcd panel: drivers/video/decon_display/s6e3fa2_mipi_lcd.c lcd panel driver has been probed.
<6>[ 3.258240] [c6] s5p-decon-display 14400000.fimd_fb: mipi-dsi driver(CPU mode) has been probed.
<4>[ 3.258250] [c6] ###create_decon_display_controller: Start
<6>[ 3.258261] [c6] s5p-decon-display 14400000.fimd_fb: PSR mode is 2(0: VIDEO, 1: DP, 2: MIPI)
<6>[ 3.258990] [c6] s5p-decon-display 14400000.fimd_fb: IOVMM: IOVM SIZE = 0x40000000 B, IOVMM from 0x10000000.
<6>[ 3.259010] [c6] s5p-decon-display 14400000.fimd_fb: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0x50000000.
<6>[ 3.259029] [c6] s5p-decon-display 14400000.fimd_fb: IOVMM: IOVM SIZE = 0x20000000 B, IOVMM from 0x80000000.
<6>[ 3.259047] [c6] s5p-decon-display 14400000.fimd_fb: IOVMM: IOVM SIZE = 0x30000000 B, IOVMM from 0xa0000000.
<6>[ 3.259061] [c6] s5p-decon-display 14400000.fimd_fb: IOVMM: IOVM SIZE = 0x10000000 B, IOVMM from 0xd0000000.
<7>[ 3.294474] [c7] of_get_named_gpio_flags exited with status 155
<6>[ 3.294563] [c7] s5p-decon-display 14400000.fimd_fb: pcd_detection_init: pcd_detected 0, pcd gpio 1
<7>[ 3.295116] [c7] of_get_named_gpio_flags exited with status 76
<4>[ 3.300461] [c7] s5p-decon-display 14400000.fimd_fb: pm_stay_awake
<6>[ 3.300472] s5p-decon-display 14400000.fimd_fb: window 0: fb
<6>[ 3.300482] [c7] s5p-decon-display 14400000.fimd_fb: create_decon_display_controller: End
<6>[ 3.300998] [c7] regulator regulator.34: func:max77804_reg_is_enabled
<6>[ 3.301010] [c7] regulator regulator.34: func:max77804_get_rid
<6>[ 3.301020] [c7] regulator regulator.34: func:max77804_get_enable_register
<6>[ 3.301179] [c7] regulator regulator.33: func:max77804_reg_is_enabled
<6>[ 3.301188] [c7] regulator regulator.33: func:max77804_get_rid
<6>[ 3.301197] [c7] regulator regulator.33: func:max77804_get_enable_register
<6>[ 3.301350] [c7] safeout1_range: disabling
<6>[ 3.301359] [c7] regulator regulator.33: func:max77804_reg_disable
<6>[ 3.301368] [c7] regulator regulator.33: func:max77804_get_rid
<6>[ 3.301376] [c7] is_muic_usb_path_ap_usb: [0]
<6>[ 3.301384] [c7] max77804_regulator_check_disable: cannot disable regulator(0)
<3>[ 3.301392] [c7] safeout1_range: couldn't disable: -22
<6>[ 3.302968] [c7] IR_3.3V_AP: disabling
<6>[ 3.303446] [c7] vcc_3.0v_motor: disabling
<3>[ 3.304502] [c6] PM DOMAIN: pd-isp can't add device exynos-fimc-is-companion
<3>[ 3.304534] [c6] fimc_is_companion_parse_dt:190: use_pmic not use(0)
<6>[ 3.304545] [c6] [@]fimc_is_power_setpin: sensor found(id 10).
<7>[ 3.304562] [c6] of_get_named_gpio_flags exited with status 130
<7>[ 3.304585] [c6] of_get_named_gpio_flags exited with status 69
<7>[ 3.304605] [c6] of_get_named_gpio_flags exited with status 129
<7>[ 3.304622] [c6] of_get_named_gpio_flags exited with status 75
<6>[ 3.304641] [c6] [0][0][7][ch0] gpio function cfg is seted
<6>[ 3.304649] [0][0][9][af0] gpio function cfg is seted[0][1][1][off0] gpio function cfg is seted
<6>[ 3.305223] [@][VID] exynos-fimc-is-sensor9(109) is created
<6>[ 3.305232] [c6] [@][CP9:V:X] fimc_is_comp_video_probe(0)
<6>[ 3.305242] [c6] [@][COMP:D] fimc_is_companion_probe(0)
<6>[ 3.306133] [c6] sec-thermistor sec_thermistor.23: SEC Thermistor successfully probed.
<7>[ 3.306235] [c6] of_get_named_gpio_flags: can't parse gpios property
<6>[ 3.315787] [c0] arizona spi2.0: Detected jack removal
<6>[ 3.315936] [c0] florida-codec florida-codec: SET GAIN 0 step for 2147483647 ohms
<6>[ 3.315951] [c0] florida-codec florida-codec: pacific_arizona_micd_cb: ear_mic = 0
<6>[ 3.317079] [c7] input: Headset as /devices/12d40000.spi/spi_master/spi2/spi2.0/arizona-extcon/input/input13
<4>[ 3.317214] [c0] arizona spi2.0: Spurious HPDET IRQ
<6>[ 3.318142] [c4] mif: modem_probe: mif_pdata.29
<6>[ 3.318164] [c4] mif: parse_dt_iodevs_pdata: umts_ipc0
<6>[ 3.318179] [c4] mif: parse_dt_iodevs_pdata: umts_rfs0
<6>[ 3.318194] [c4] mif: parse_dt_iodevs_pdata: umts_boot0
<6>[ 3.318207] [c4] mif: parse_dt_iodevs_pdata: multipdp
<6>[ 3.318221] [c4] mif: parse_dt_iodevs_pdata: umts_router
<6>[ 3.318234] [c4] mif: parse_dt_iodevs_pdata: umts_csd
<6>[ 3.318247] [c4] mif: parse_dt_iodevs_pdata: umts_dm0
<6>[ 3.318260] [c4] mif: parse_dt_iodevs_pdata: umts_log
<6>[ 3.318274] [c4] mif: parse_dt_iodevs_pdata: rmnet0
<6>[ 3.318287] [c4] mif: parse_dt_iodevs_pdata: rmnet1
<6>[ 3.318300] [c4] mif: parse_dt_iodevs_pdata: rmnet2
<6>[ 3.318313] [c4] mif: parse_dt_iodevs_pdata: rmnet3
<6>[ 3.318325] [c4] mif: modem_if_parse_dt_pdata: DT parse complete!
<7>[ 3.318730] [c4] of_get_named_gpio_flags exited with status 161
<7>[ 3.318753] [c4] of_get_named_gpio_flags exited with status 168
<7>[ 3.318771] [c4] of_get_named_gpio_flags exited with status 17
<7>[ 3.318788] [c4] of_get_named_gpio_flags exited with status 38
<7>[ 3.318805] [c4] of_get_named_gpio_flags exited with status 31
<7>[ 3.318817] [c4] of_get_named_gpio_flags exited with status 30
<7>[ 3.318835] [c4] of_get_named_gpio_flags exited with status 163
<6>[ 3.318934] [c4] wake enabled for irq 724
<6>[ 3.318943] [c4] mif: create_modemctl_device: xmm6360 is created!!!
<6>[ 3.318952] [c4] mif: hsic_create_link_device: Get tx qlen : 50
<6>[ 3.319210] [c4] usbcore: registered new interface driver cdc_modem
<6>[ 3.319239] [c4] mif: if_init_rx_urb: Complete init_rx_urb(3, 4)
<6>[ 3.319259] [c4] mif: if_init_rx_urb: Complete init_rx_urb(4, 4)
<6>[ 3.319280] [c4] mif: if_init_rx_urb: Complete init_rx_urb(5, 4)
<6>[ 3.319299] [c4] mif: if_init_rx_urb: Complete init_rx_urb(6, 4)
<6>[ 3.319308] [c4] mif: phy_register_notifier: register hsic_notifier
<6>[ 3.319319] [c4] mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xed66dc00)
<6>[ 3.319327] [c4] mif: hsic_create_link_device: usb : create_link_device DONE
<3>[ 3.319335] [c4] mif: modem_probe: link created: usb
<6>[ 3.319345] [c4] mif: create_io_device: FMT device = umts_ipc0
<6>[ 3.319720] [c4] mif: sipc_print_ops: umts_ipc0: sipc5_hdr_create(), sipc5_hdr_parse_fragment(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
<6>[ 3.319735] [c4] mif: sipc_print_ops: header_parse_continue = sipc5_hdr_parse_fragment_continue()
<6>[ 3.319745] [c4] mif: sipc_print_ops: recv_skb_fragment = sipc5_recv_multipacket_to_each_skb()
<6>[ 3.320156] [c4] mif: sipc_print_ops: umts_rfs0: sipc5_hdr_create_legacy_rfs(), sipc5_hdr_parse_legacy_rfs(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
<6>[ 3.320169] [c4] mif: sipc_print_ops: header_parse_continue = sipc5_hdr_parse_legacy_rfs_continue()
<6>[ 3.320179] [c4] mif: sipc_print_ops: recv_skb_fragment = sipc5_recv_multipacket_to_each_skb()
<6>[ 3.320190] [c4] mif: create_io_device: Bood device = umts_boot0
<6>[ 3.321066] [c4] mif: sipc_print_ops: multipdp: sipc5_hdr_create(), sipc5_hdr_parse_fragment(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
<6>[ 3.321078] [c4] mif: sipc_print_ops: header_parse_continue = sipc5_hdr_parse_fragment_continue()
<6>[ 3.321088] [c4] mif: sipc_print_ops: recv_skb_fragment = sipc5_recv_multipacket_to_each_skb()
<6>[ 3.321525] [c4] mif: sipc_print_ops: umts_router: sipc5_hdr_create(), sipc5_hdr_parse_fragment(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
<6>[ 3.321537] [c4] mif: sipc_print_ops: header_parse_continue = sipc5_hdr_parse_fragment_continue()
<6>[ 3.321548] [c4] mif: sipc_print_ops: recv_skb_fragment = sipc5_recv_multipacket_to_each_skb()
<6>[ 3.321970] [c4] mif: sipc_print_ops: umts_csd: sipc5_hdr_create(), sipc5_hdr_parse_fragment(), sipc5_recv_demux(), sipc_recv_skb_miscdev()
<6>[ 3.321982] [c4] mif: sipc_print_ops: header_parse_continue = sipc5_hdr_parse_fragment_continue()
<6>[ 3.321992] [c4] mif: sipc_print_ops: recv_skb_fragment = sipc5_recv_multipacket_to_each_skb()
<3>[ 3.322256] [c5] mif: sipc5_init_io_device: dm_state : umts_dm0, sucess
<6>[ 3.326121] [c5] mif: modem_probe: Complete!!!
<7>[ 3.326737] [c5] of_get_named_gpio_flags exited with status 164
<7>[ 3.327026] [c5] of_get_named_gpio_flags exited with status 18
<7>[ 3.327243] [c5] of_get_named_gpio_flags exited with status 157
<7>[ 3.327457] [c5] of_get_named_gpio_flags exited with status 160
<6>[ 3.327473] [c5] mif: link_pm_parse_dt_pdata: DT parse complete!
<6>[ 3.327527] [c5] mif: ehci_port_reg_init: port reg get success (f184e000)
<6>[ 3.327545] [c5] mif: ehci_port_reg_init: phy reg get success (f187c000)
<6>[ 3.328028] [c5] wake enabled for irq 726
<6>[ 3.328041] [c5] mif: phy_register_notifier: register hsic_notifier
<6>[ 3.328051] [c5] mif: xmm626x_linkpm_probe: success
<7>[ 3.328342] [c5] usb: init
<7>[ 3.329044] [c5] usb: android_bind disconnect
<6>[ 3.329308] [c5] file system registered
<7>[ 3.332075] [c5] [mtp_setup] line = [1688]
<7>[ 3.333015] [c5] usb: usb_string_id cdev(0xecab5080)->next_string_id=1
<6>[ 3.333238] [c5] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 3.333248] [c5] android_usb gadget: Number of LUNs=1
<6>[ 3.333259] [c5] lun0: LUN: removable file: (no medium)
<3>[ 3.335302] [c5] conn_gadget_function_init(#) call conn_gadget_setup
<6>[ 3.335312] [c5] conn_gadget_setup
<7>[ 3.335757] [c5] usb: usb_string_id cdev(0xecab5080)->next_string_id=2
<7>[ 3.335768] [c5] usb: usb_string_id cdev(0xecab5080)->next_string_id=3
<7>[ 3.335780] [c5] usb: usb_string_id cdev(0xecab5080)->next_string_id=4
<6>[ 3.335790] [c5] android_usb gadget: android_usb ready
<6>[ 3.336271] [c5] usb_notifier: usb: of_get_usb_redriver_dt, gpios_redriver_en count 1
<7>[ 3.336283] [c5] of_get_named_gpio_flags exited with status 5
<6>[ 3.336294] [c5] usb_notify: registered otg_notify +
<6>[ 3.336592] [c5] usb_notify: redriver en gpio 5 is registered.
<6>[ 3.336603] [c5] usb_notify: registered otg_notify -
<6>[ 3.336613] [c5] muic_notifier_register: listener=2 register
<6>[ 3.336622] [c5] usb_notify: send_otg_notify event=vbus(1) enable=1
<6>[ 3.336631] [c5] usb_notify: otg_notifier_callback event=vbus(1)
<6>[ 3.336651] [c5] usb notifier: usb: usb_handle_notification - action=1, attached_dev=1
<6>[ 3.336663] [c5] usb_notifier usb_notifier.19: usb notifier probe
<6>[ 3.336706] [c7] usb_notify: otg_notify_state+ event=vbus(1), enable=on
<6>[ 3.337224] [c7] usb_notifier: usb: check_usb_vbus_state is_ready:0 ,vbus state:1
<6>[ 3.337234] [c7] usb_notifier: usb: check_usb_vbus_state usb_gadget_notifier is not ready.
<6>[ 3.337244] [c7] usb_notify: otg_notify_state- event=vbus, cable=vbus
<7>[ 3.337428] [c5] of_get_named_gpio_flags exited with status 26
<7>[ 3.337445] [c5] of_get_named_gpio_flags exited with status 11
<7>[ 3.337460] [c5] of_get_named_gpio_flags exited with status 10
<7>[ 3.337474] [c5] of_get_named_gpio_flags exited with status 13
<7>[ 3.337572] [c5] gpiod_set_debounce: gpio-26 status -22
<7>[ 3.337652] [c5] gpiod_set_debounce: gpio-11 status -22
<7>[ 3.337706] [c5] gpiod_set_debounce: gpio-10 status -22
<7>[ 3.337758] [c5] gpiod_set_debounce: gpio-13 status -22
<6>[ 3.338780] [c5] input: gpio_keys.16 as /devices/gpio_keys.16/input/input14
<6>[ 3.340600] [c5] input_booster input_booster.22: input_booster_init_dvfs: TOUCH is registered and intialized for touch dvfs
<4>[ 3.340877] [c5] hall_init start
<7>[ 3.341151] [c5] of_get_named_gpio_flags exited with status 9
<6>[ 3.341173] [c5] of_hall_data_parsing_dt: get the wa property
<6>[ 3.341400] [c5] init_hall_ic_irq : success
<6>[ 3.341702] [c5] input: hall as /devices/hall.13/input/input15
<6>[ 3.343679] [c5] s2m-rtc s2m-rtc: s2m_rtc_read_time: 2014-01-08 13:50:23(0x08)PM
<6>[ 3.343795] [c5] s2m-rtc s2m-rtc: setting system clock to 2014-01-08 13:50:23 UTC (1389189023)
<6>[ 3.343812] [c5] Driver for 1-wire Dallas network protocol.
<4>[ 3.344987] [c5] w1_init: Register pm notifier
<6>[ 3.345200] [c5] w1_gpio_probe : start
<7>[ 3.345224] [c5] of_get_named_gpio_flags exited with status 204
<6>[ 3.345599] [c5] input: w1 as /devices/w1_gpio_exynos.14/input/input16
<3>[ 3.346127] [c5] w1_uevent master_dev name = w1_bus_master1
<6>[ 3.346459] [c5] w1_add_master_device : W1 kthread will start
<6>[ 3.347207] [c6] [IPA] control_temp : 50
<6>[ 3.347219] [c6] [IPA] temp_threshold : 10
<6>[ 3.347227] [c6] [IPA] enabled : 1
<6>[ 3.347235] [c6] [IPA] tdp : 3500
<6>[ 3.347244] [c6] [IPA] boost : 1
<6>[ 3.347252] [c6] [IPA] ros_power : 500
<6>[ 3.347260] [c6] [IPA] a7_weight : 1024
<6>[ 3.347268] [c6] [IPA] a15_weight : 256
<6>[ 3.347276] [c6] [IPA] gpu_weight : 256
<6>[ 3.347284] [c6] [IPA] a7_max_power : 1000
<6>[ 3.347292] [c6] [IPA] a15_max_power : 6552
<6>[ 3.347301] [c6] [IPA] gpu_max_power : 3110
<6>[ 3.347309] [c6] [IPA] hotplug_in_threshold : 0
<6>[ 3.347317] [c6] [IPA] hotplug_out_threshold : 10
<6>[ 3.347326] [c6] [IPA] enable_ctlr : 1
<6>[ 3.347334] [c6] [IPA] ctlr.mult : 2
<6>[ 3.347342] [c6] [IPA] ctlr.k_i : 1
<6>[ 3.347350] [c6] [IPA] ctlr.k_d : 0
<6>[ 3.347358] [c6] [IPA] ctlr.feed_forward : 1
<6>[ 3.347367] [c6] [IPA] ctlr.integral_reset_value : 0
<6>[ 3.347375] [c6] [IPA] ctlr.integral_cutoff : 0
<6>[ 3.347384] [c6] [IPA] ctlr.integral_reset_threshold : 5
<6>[ 3.347393] [c6] Deferring initialisation...
<6>[ 3.372193] MIF 825000Khz ASV is 887500uV
<6>[ 3.372213] [c7] DEVFREQ(MIF) : 825000Khz, ABB 14
<6>[ 3.372221] [c7] MIF 728000Khz ASV is 837500uV
<6>[ 3.372231] [c7] DEVFREQ(MIF) : 728000Khz, ABB 14
<6>[ 3.372239] [c7] MIF 633000Khz ASV is 800000uV
<6>[ 3.372248] [c7] DEVFREQ(MIF) : 633000Khz, ABB 14
<6>[ 3.372255] [c7] MIF 543000Khz ASV is 775000uV
<6>[ 3.372265] [c7] DEVFREQ(MIF) : 543000Khz, ABB 14
<6>[ 3.372272] [c7] MIF 413000Khz ASV is 737500uV
<6>[ 3.372281] [c7] DEVFREQ(MIF) : 413000Khz, ABB 14
<6>[ 3.372288] [c7] MIF 275000Khz ASV is 737500uV
<6>[ 3.372296] [c7] DEVFREQ(MIF) : 275000Khz, ABB 14
<6>[ 3.372304] [c7] MIF 206000Khz ASV is 737500uV
<6>[ 3.372312] [c7] DEVFREQ(MIF) : 206000Khz, ABB 14
<6>[ 3.372319] [c7] MIF 165000Khz ASV is 737500uV
<6>[ 3.372328] [c7] DEVFREQ(MIF) : 165000Khz, ABB 14
<6>[ 3.372335] [c7] MIF 138000Khz ASV is 737500uV
<6>[ 3.372344] [c7] DEVFREQ(MIF) : 138000Khz, ABB 14
<6>[ 3.373444] [c7] MIF: set ASV freq 825000, voltage 887500
<6>[ 3.375036] [c7] INT 600000Khz ASV is 912500uV
<6>[ 3.375053] [c7] DEVFREQ(INT) : 600000Khz, ABB 255
<6>[ 3.375062] [c7] INT 500000Khz ASV is 900000uV
<6>[ 3.375071] [c7] DEVFREQ(INT) : 500000Khz, ABB 255
<6>[ 3.375079] [c7] INT 480000Khz ASV is 900000uV
<6>[ 3.375087] [c7] DEVFREQ(INT) : 480000Khz, ABB 255
<6>[ 3.375095] [c7] INT 460000Khz ASV is 900000uV
<6>[ 3.375103] [c7] DEVFREQ(INT) : 460000Khz, ABB 255
<6>[ 3.375111] [c7] INT 440000Khz ASV is 900000uV
<6>[ 3.375119] [c7] DEVFREQ(INT) : 440000Khz, ABB 255
<6>[ 3.375127] [c7] INT 420000Khz ASV is 900000uV
<6>[ 3.375135] [c7] DEVFREQ(INT) : 420000Khz, ABB 255
<6>[ 3.375143] [c7] INT 400000Khz ASV is 862500uV
<6>[ 3.375151] [c7] DEVFREQ(INT) : 400000Khz, ABB 255
<6>[ 3.375158] [c7] INT 333000Khz ASV is 862500uV
<6>[ 3.375167] [c7] DEVFREQ(INT) : 333000Khz, ABB 255
<6>[ 3.375174] [c7] INT 222000Khz ASV is 862500uV
<6>[ 3.375183] [c7] DEVFREQ(INT) : 222000Khz, ABB 14
<6>[ 3.375191] [c7] INT 111000Khz ASV is 862500uV
<6>[ 3.375199] [c7] DEVFREQ(INT) : 111000Khz, ABB 14
<6>[ 3.375207] [c7] INT 83000Khz ASV is 862500uV
<6>[ 3.375215] [c7] DEVFREQ(INT) : 83000Khz, ABB 14
<6>[ 3.378986] [c4] DEVFREQ(ISP) : 666000Khz, 925000V
<6>[ 3.378998] [c4] DEVFREQ(ISP) : 555000Khz, 925000V
<6>[ 3.379008] [c4] DEVFREQ(ISP) : 444000Khz, 925000V
<6>[ 3.379017] [c4] DEVFREQ(ISP) : 333000Khz, 875000V
<6>[ 3.379026] [c4] DEVFREQ(ISP) : 222000Khz, 875000V
<6>[ 3.379034] [c4] DEVFREQ(ISP) : 111000Khz, 875000V
<6>[ 3.379043] [c4] DEVFREQ(ISP) : 100000Khz, 875000V
<6>[ 3.380838] [c4] sec_bat_parse_dt : chg_temp_check is Empty
<6>[ 3.380852] [c4] sec_bat_parse_dt : inbat_voltage is Empty
<6>[ 3.381072] [c4] sec_bat_parse_dt: vendor : SDI SDI, technology : 2, cable_check_type : 4
<6>[ 3.381072] cable_source_type : 1, event_waiting_time : 600
<6>[ 3.381072] polling_type : 1, initial_count : 0, check_count : 0
<6>[ 3.381072] check_adc_max : 1440, check_adc_min : 0
<6>[ 3.381072] ovp_uvlo_check_type : 3, thermal_source : 2
<6>[ 3.381072] temp_check_type : 2, temp_check_count : 1
<6>[ 3.381072] temp_high_threshold_even : 700, temp_high_recovery_event : 460
<6>[ 3.383662] [c5] muic_notifier_register: listener=4 register
<6>[ 3.383675] [c5] [sec_bat_cable_check]ATTACHED(1)
<6>[ 3.383704] [c5] sec-battery battery.28: batt_handle_notification: current_cable(4), wc_status(0), wire_status(4)
<6>[ 3.383728] [c5] batt_handle_notification: CMD=ATTACH, attached_dev=1
<6>[ 3.383738] [c6] sec-battery battery.28: sec_bat_cable_work: Start
<6>[ 3.383748] [c5] cable_initial_check : current_cable_type : (4)
<6>[ 3.383792] [c5] sec-battery battery.28: sec_battery_probe: SEC Battery Driver Loaded
<6>[ 3.384457] [c6] max77804_set_charge_current: reg_data(0x8b), charge(460)
<6>[ 3.385153] [c6] max77804_set_input_current: reg_data(0x12), input(460)
<6>[ 3.385557] [c6] max77804_set_topoff_current: reg_data(0x24), topoff(200)
<6>[ 3.385689] [c6] sec-battery battery.28: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
<6>[ 3.385700] [c6] sec-battery battery.28: sec_bat_cable_work: Polling time is reset to 30 sec.
<6>[ 3.386105] [c5] ice40lm_probe probe!
<7>[ 3.386135] [c5] of_get_named_gpio_flags exited with status 169
<7>[ 3.386149] [c5] of_get_named_gpio_flags exited with status 151
<7>[ 3.386160] [c5] of_get_named_gpio_flags exited with status 12
<7>[ 3.386176] [c5] of_get_named_gpio_flags exited with status 198
<7>[ 3.386191] [c5] of_get_named_gpio_flags exited with status 221
<7>[ 3.386202] [c5] of_get_named_gpio_flags exited with status 0
<6>[ 3.386211] [c5] of_ice40lm_dt: clk_out
<6>[ 3.386236] [c5] of_ice40lm_dt: ice40lm will use LDO
<7>[ 3.386248] [c5] of_get_named_gpio_flags exited with status 109
<6>[ 3.386306] [c5] ice4_check_cdone : CDONE_FAIL 0
<6>[ 3.386313] [c5] FPGA FW is NOT loaded!
<3>[ 3.386869] [c5] probe complete ice40lm_probe
<6>[ 3.387602] [c5] net/netfilter/nf_queue.c:nf_register_queue_handler_is_null queue handler is not null!
<6>[ 3.387646] [c5] PM DOMAIN: Power off unused power domains.
<6>[ 3.387685] [c5] ALSA device list:
<6>[ 3.387694] [c5] #0: Pacific WM5110 Sound
<3>[ 3.387736] [c5] Warning: unable to open an initial console.
<6>[ 3.387754] [c5] kernel_init: GPIO DVS: check init gpio
<4>[ 3.389716] [c6] !@Boot: start init process
<7>[ 3.395780] [c6] SELinux: 2048 avtab hash slots, 25598 rules.
<6>[ 3.403073] [c5] ice40: fw_update
<6>[ 3.403086] [c5] ice40: fw_update_start
<7>[ 3.403811] [c6] SELinux: 2048 avtab hash slots, 25598 rules.
<7>[ 3.403840] [c6] SELinux: 1 users, 2 roles, 1297 types, 0 bools, 1 sens, 1024 cats
<7>[ 3.403857] [c6] SELinux: 86 classes, 25598 rules
<6>[ 3.404337] [c5] ice4_check_cdone : CDONE_FAIL 0
<7>[ 3.406453] [c6] SELinux: Completing initialization.
<7>[ 3.406465] [c6] SELinux: Setting up existing superblocks.
<7>[ 3.406490] [c6] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[ 3.406514] [c6] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[ 3.406636] [c6] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[ 3.406659] [c6] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[ 3.406690] [c6] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.406720] [c6] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
<7>[ 3.409704] [c6] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[ 3.422858] [c6] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[ 3.422882] [c6] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[ 3.422905] [c6] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
<7>[ 3.422926] [c6] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[ 3.423011] [c6] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[ 3.423205] [c6] SELinux: initialized (dev configfs, type configfs), not configured for labeling
<7>[ 3.423228] [c6] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 3.423279] [c6] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<3>[ 3.828327] [c4] init: /init.universal5422.rc: 579: ignored duplicate definition of service 'mobicore'
<3>[ 3.828487] [c4] init: /init.universal5422.rc: 718: ignored duplicate definition of service 'playlpm'
<3>[ 3.829149] [c4] init: /init.container.rc: 52: invalid option 'start'
<6>[ 3.843434] [c6] cluster: 0 freq: 800000 power=79
<6>[ 3.843448] [c6] cluster: 0 freq: 900000 power=96
<6>[ 3.843458] [c6] cluster: 0 freq: 1000000 power=116
<6>[ 3.843468] [c6] cluster: 0 freq: 1100000 power=138
<6>[ 3.843477] [c6] cluster: 0 freq: 1200000 power=159
<6>[ 3.843487] [c6] cluster: 0 freq: 1300000 power=189
<4>[ 3.843497] [c6] get_power_value: freq: 1400000 for cluster: 0 is greater than max. freq: 1300000
<6>[ 3.843507] [c6] cluster: 0 freq: 1300000 power=203
<4>[ 3.843518] [c6] get_power_value: freq: 1500000 for cluster: 0 is greater than max. freq: 1300000
<6>[ 3.843527] [c6] cluster: 0 freq: 1300000 power=218
<6>[ 3.843537] [c6] cluster: 1 freq: 800000 power=383
<6>[ 3.843547] [c6] cluster: 1 freq: 900000 power=431
<6>[ 3.843557] [c6] cluster: 1 freq: 1000000 power=479
<6>[ 3.843566] [c6] cluster: 1 freq: 1100000 power=539
<6>[ 3.843576] [c6] cluster: 1 freq: 1200000 power=614
<6>[ 3.843585] [c6] cluster: 1 freq: 1300000 power=709
<6>[ 3.843594] [c6] cluster: 1 freq: 1400000 power=780
<6>[ 3.843603] [c6] cluster: 1 freq: 1500000 power=889
<6>[ 3.843612] [c6] cluster: 1 freq: 1600000 power=1005
<6>[ 3.843622] [c6] cluster: 1 freq: 1700000 power=1153
<6>[ 3.843631] [c6] cluster: 1 freq: 1800000 power=1314
<6>[ 3.843641] [c6] cluster: 1 freq: 1900000 power=1515
<4>[ 3.843651] [c6] get_power_value: freq: 2000000 for cluster: 1 is greater than max. freq: 1900000
<6>[ 3.843660] [c6] cluster: 1 freq: 1900000 power=1594
<6>[ 3.843675] [c6] Intelligent Power Allocation initialised.
<6>[ 3.895667] [c7] max77804_get_input_current: CHG_CNFG_09(0x12)
<6>[ 3.895840] [c7] max77804_get_input_current: CHG_CNFG_09(0x12)
<6>[ 3.899338] [c7] sec-battery battery.28: sec_bat_get_temperature_by_adc: Temp(243), Temp-ADC(2059)
<6>[ 3.900810] [c7] sec-battery battery.28: sec_bat_get_temperature_by_adc: Temp(243), Temp-ADC(2061)
<7>[ 3.902194] [c7] sec-fuelgauge 7-0036: sec_fg_get_scaled_capacity: scaled capacity (88.2)
<6>[ 3.902210] [c7] sec-battery battery.28: sec_bat_get_battery_info:Vnow(4175mV),Inow(450mA),Imax(460mA),SOC(88%),Tbat(243)
<6>[ 3.902387] [c7] sec-battery battery.28: sec_bat_battery_cable_check: Battery Connected
<6>[ 3.902558] [c7] max77804_get_health_state: reg_data(0x3)
<6>[ 3.902732] [c7] max77804_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
<6>[ 3.903047] max77804_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[ 3.903067] [c7] sec-battery battery.28: sec_bat_temperature: HLT(800), HLR(750), HT(600), HR(460), LT(-50), LR(0)
<6>[ 3.903086] [c7] sec-battery battery.28: sec_bat_fullcharged_check: Charging Mode : Normal
<6>[ 3.903106] [c7] sec-battery battery.28: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%)
<6>[ 3.949909] [c4] max77804_get_charger_state: CHG_DTLS : 0x 1
<6>[ 3.950078] [c4] max77804_get_health_state: reg_data(0x3)
<6>[ 3.950252] [c4] max77804_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
<6>[ 3.950561] max77804_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[ 3.950879] [c4] max77804_get_input_current: CHG_CNFG_09(0x12)
<3>[ 3.950895] [c4] power_supply sec-charger: driver failed to report `charge_otg_control' property: -22
<3>[ 4.067231] [c4] w1_uevent master_dev name = w1_bus_master1
<6>[ 4.141965] [c7] max77804_get_input_current: CHG_CNFG_09(0x12)
<6>[ 4.142135] [c7] max77804_get_input_current: CHG_CNFG_09(0x12)
<7>[ 4.146132] [c7] sec-fuelgauge 7-0036: sec_fg_get_scaled_capacity: scaled capacity (88.2)
<6>[ 4.532727] [c5] ice40lm firmware update success
<3>[ 4.843981] [c6] init: Failed to read from /dev/hw_random: Try again
<3>[ 4.844079] [c6] init: could not open /dev/keychord
<4>[ 4.847398] [c4] ffu: Try to F/W Update(VMX 11.5 x 13 [16GB])
<4>[ 4.847398] ffu: No need to update f/w
<7>[ 4.848815] [c6] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[ 4.849309] [c6] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 4.851538] [c6] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 4.852794] [c6] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 4.853267] [c6] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 4.855487] [c6] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<3>[ 4.860643] [c6] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<4>[ 4.861538] [c6] SDP_MM: entering open
<4>[ 4.861569] [c6] SDP_MM: entering open
<3>[ 4.868114] [c6] init: Failed to read from /dev/hw_random: Try again
<6>[ 4.875140] [c7] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: errors=panic
<7>[ 4.875168] [c7] SELinux: initialized (dev mmcblk0p18, type ext4), uses xattr
<6>[ 4.875343] [c7] fs_mgr: __mount(source=/dev/block/mmcblk0p18,target=/system,type=ext4)=0
<6>[ 4.880450] [c7] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p3
<6>[ 4.929519] [c7] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 4.929583] [c7] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear.
<6>[ 4.929597] [c7] e2fsck: check whether gdt & bitmap free count is vaild
<6>[ 4.929610] [c7] e2fsck: /dev/block/mmcblk0p3: clean, 68/1280 files, 2447/5120 blocks
<6>[ 4.929622] [c7] e2fsck: ext2fs_close2 : normal operation, return 0
<6>[ 4.936082] [c4] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,journal_async_commit,errors=panic
<7>[ 4.936108] [c4] SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr
<6>[ 4.936185] [c4] fs_mgr: __mount(source=/dev/block/mmcblk0p3,target=/efs,type=ext4)=0
<6>[ 4.936250] [c4] fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p19
<6>[ 4.950028] [c4] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 4.950074] [c4] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear.
<6>[ 4.950088] [c4] e2fsck: check whether gdt & bitmap free count is vaild
<6>[ 4.950101] [c4] e2fsck: /dev/block/mmcblk0p19: clean, 26/12800 files, 1911/51200 blocks
<6>[ 4.950113] [c4] e2fsck: ext2fs_close2 : normal operation, return 0
<6>[ 4.955479] [c4] EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,journal_async_commit,errors=panic
<7>[ 4.955509] [c4] SELinux: initialized (dev mmcblk0p19, type ext4), uses xattr
<6>[ 4.955599] [c4] fs_mgr: __mount(source=/dev/block/mmcblk0p19,target=/cache,type=ext4)=0
<4>[ 4.956909] [c4] CryptfsFSCK: Decryption operation succeededfs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p21
<6>[ 5.028733] [c4] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 5.028780] [c4] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear.
<6>[ 5.028794] [c4] e2fsck: check whether gdt & bitmap free count is vaild
<6>[ 5.028806] [c4] e2fsck: superblock fsync before orphan cleanup!
<6>[ 5.028818] [c4] e2fsck: Clearing orphaned inode 263457 (uid=1000, gid=1000, mode=0100660, size=122880)
<6>[ 5.028830] [c4] e2fsck: flush all filesystem after orphan cleanup!
<6>[ 5.028842] [c4] e2fsck: ext2fs_write_bitmaps : do_inode = 1, do_block = 1
<6>[ 5.028854] [c4] e2fsck: superblock fsync after orphan cleanup!
<6>[ 5.028866] [c4] e2fsck: check whether gdt & bitmap free count is vaild after release orphan inode
<6>[ 5.028878] [c4] e2fsck: /dev/block/mmcblk0p21: clean, 3163/776720 files, 392132/3105788 blocks
<6>[ 5.028890] [c4] e2fsck: ext2fs_close2 : normal operation, return 0
<6>[ 5.034655] [c4] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,journal_async_commit,errors=panic
<7>[ 5.034684] [c4] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
<6>[ 5.034772] [c4] fs_mgr: __mount(source=/dev/block/mmcblk0p21,target=/data,type=ext4)=0
<6>[ 5.041035] [c6] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1
<7>[ 5.041062] [c6] SELinux: initialized (dev mmcblk0p20, type ext4), uses xattr
<3>[ 5.041617] [c6] init: Running /dev/block/mmcblk0p16 on ext4
<4>[ 5.047641] [c4] e2fsck 1.42.9 (28-Dec-2013)
<4>[ 5.050911] [c4] skipping journal recoverybecause INCOMPAT_RECOVER was clear.
<4>[ 5.050948] [c4] check whether gdt & bitmap free count is vaild
<4>[ 5.051107] [c4] /dev/block/mmcblk0p16: clean, 21/768 files, 1143/3072 blocks
<4>[ 5.051693] [c4] ext2fs_close2 : normal operation, return 0
<6>[ 5.058215] [c6] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: barrier=1
<7>[ 5.058243] [c6] SELinux: initialized (dev mmcblk0p16, type ext4), uses xattr
<7>[ 5.067471] [c6] [mtpg_open] line = [538]
<7>[ 5.067491] [c6] [mtpg_release_device] line = [1155]
<7>[ 5.067515] [c6] [mtpg_open] line = [538]
<7>[ 5.067534] [c6] [mtpg_release_device] line = [1155]
<6>[ 5.122577] [c6] System has 8 CPU's, we are on CPU #6
<6>[ 5.122577] Binding this process to CPU #0.
<6>[ 5.122577] active mask is ff, setting it to mask=1
<6>[ 5.122646] [c0] And now we are on CPU #0
<6>[ 5.122658] [c0] [oemflag]CPU 0
<6>[ 5.122668] [c0] [oemflag]command error
<6>[ 5.122681] [c0] System has 8 CPU's, we are on CPU #0
<6>[ 5.122681] Binding this process to CPU #0.
<6>[ 5.122681] active mask is ff, setting it to mask=ff
<6>[ 5.122700] [c0] And now we are on CPU #0
<6>[ 5.122710] [c0] [oemflag]ALL CPU (new_to)
<6>[ 5.130654] [c5] conn_gadget_open
<6>[ 5.130675] [c5] conn_gadget_flush
<6>[ 5.130686] [c5] conn_gadget_release
<6>[ 5.130710] [c5] conn_gadget_open
<6>[ 5.130725] [c5] conn_gadget_flush
<6>[ 5.130735] [c5] conn_gadget_release
<7>[ 5.136607] [c5] [mtpg_open] line = [538]
<7>[ 5.136628] [c5] [mtpg_release_device] line = [1155]
<7>[ 5.136652] [c5] [mtpg_open] line = [538]
<7>[ 5.136671] [c5] [mtpg_release_device] line = [1155]
<6>[ 5.253932] [c6] pn547 10-0029: pn547_dev_open : 10,53
<6>[ 5.253973] [c6] pn547 10-0029: pn547_dev_open : 10,53
<3>[ 5.298756] [c6] init: cannot find '/system/bin/sysmon', disabling 'sysmon'
<6>[ 5.304079] [c5] healthd: Healthd mode is android
<6>[ 5.304842] [c5] binder: 3585:3585 transaction failed 29189, size 0-0
<3>[ 5.306667] [c6] init: Warning! Service swapon needs a SELinux domain defined; please fix!
<6>[ 5.314409] [c4] Adding 1310716k swap on /dev/block/vnswap0. Priority:-1 extents:1 across:1310716k SSFS
<6>[ 5.332362] [c3] MobiCore mcd: *** <t MTK, Build: Jul 25 2014, 11:23:12 ***
<6>[ 5.332387] [c3] MobiCore mcd: *** jenkins-Generic_integration_build-1092 ###
<3>[ 5.335563] [c6] MobiCore mcd: MobiCore mc_fd_admin_open() ### ERROR: Daemon is already connected
<3>[ 5.335595] [c6] MobiCore mcd: MobiCore mc_fd_admin_open() ### ERROR: Daemon is already connected
<3>[ 5.335713] [c6] MobiCore mcd: MobiCore mc_fd_admin_open() ### ERROR: Daemon is already connected
<3>[ 5.335739] [c6] MobiCore mcd: MobiCore mc_fd_admin_open() ### ERROR: Daemon is already connected
<3>[ 5.338195] [c6] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
<3>[ 5.338309] [c6] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
<3>[ 5.338418] [c6] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<3>[ 5.346515] [c6] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
<6>[ 5.351211] [c3] MobiCore mcd: 501|drTima: starting main driver thread
<6>[ 5.351342] [c3] MobiCore mcd: 501|Info tima drMain: drTima: main driver thread started
<6>[ 5.360686] [c1] MobiCore mcd: 601|[KEYMAN] Driver: Driver thread started
<6>[ 5.360711] [c1] MobiCore mcd: 601|[KEYMAN] drExchLoop(): Exception handler thread is running
<6>[ 5.371637] [c7] muic-max77804k:max77804k_muic_show_usb_sel PDA
<6>[ 5.399640] [c2] warning: `connfwexe' uses 32-bit capabilities (legacy support in use)
<3>[ 5.402745] [c6] init: cannot find '/system/bin/sdp_cryptod', disabling 'sdp_cryptod'
<3>[ 5.410656] [c6] init: cannot find '/system/bin/bootchecker', disabling 'bootchecker'
<3>[ 5.413529] [c6] mif: cbd: check_debug_level: debug level=0, cp_debug=0
<6>[ 5.414083] [c6] muic-max77804k:muic_lookup_vps_table (1) vps table match found at i(8), USB
<3>[ 5.414112] [c6] mif: cbd: check_factory_log_path: log path - /sdcard/log
<3>[ 5.414138] [c6] mif: cbd: main: Start CP Boot Daemon (CBD)
<3>[ 5.414242] [c6] mif: cbd: main: XMM626x modem
<3>[ 5.414290] [c6] mif: cbd: main: partition number : 13
<3>[ 5.414322] [c6] mif: cbd: main: partition path : /dev/block/mmcblk0p13
<6>[ 5.414354] [c6] warning: `cbd' uses deprecated v2 capabilities in a way that may be insecure.
<3>[ 5.414743] [c6] mif: cbd: main: Modem type = 1
<3>[ 5.414765] [c6] mif: cbd: main: Boot link = 5
<3>[ 5.414785] [c6] mif: cbd: main: Main link = 5
<4>[ 5.414941] [c4] init.sec.boot.sh: start
<4>[ 5.415050] [c4] Running do_deferred_initcalls()
<4>[ 5.415063] [c4] dhd_module_init in
<6>[ 5.415296] [c6] mif: usb_init_communication: 3632:cbd
<3>[ 5.415312] [c6] mif: misc_open: umts_boot0 (opened 1)
<4>[ 5.415555] [c4] Power-up adapter 'DHD generic adapter'
<4>[ 5.416601] [c4] wifi_platform_set_power = 1
<6>[ 5.416619] [c4] ------------------------------------------------
<6>[ 5.416630] ------------------------------------------------
<6>[ 5.416643] [c4] dhd_wlan_power Enter: power on
<6>[ 5.417824] [c2] conn_gadget_open
<6>[ 5.417861] [c2] conn_gadget_flush
<6>[ 5.417884] [c2] conn_gadget_release
<6>[ 5.418018] [c2] conn_gadget_open
<6>[ 5.418048] [c2] conn_gadget_flush
<6>[ 5.418066] [c2] conn_gadget_release
<3>[ 5.420287] [c2] conn_gadget_in_max_packet_size_show() _conn_gadget_dev is NULL
<3>[ 5.421420] [c2] conn_gadget_out_max_packet_size_show() _conn_gadget_dev is NULL
<7>[ 5.421997] [c6] usb: enable_store enabled=0, !dev->enabled=1
<3>[ 5.422015] [c6] android_usb: already disabled
<7>[ 5.422342] [c6] usb: functions_store buff=mtp,adb
<7>[ 5.422358] [c6] usb: android_enable_function name=mtp
<7>[ 5.422372] [c6] usb: android_enable_function name=acm
<7>[ 5.422382] [c6] usb: android_enable_function name=adb
<6>[ 5.422417] [c2] conn_gadget_open
<7>[ 5.422577] [c6] usb: enable_store enabled=1, !dev->enabled=1
<7>[ 5.422591] [c6] usb: enable_store f:mtp
<7>[ 5.422606] [c6] usb: enable_store f:acm
<7>[ 5.422620] [c6] usb: acm is enabled. (bcdDevice=0x400)
<7>[ 5.422634] [c6] usb: enable_store f:adb
<7>[ 5.422651] [c6] usb: enable_store vendor=4e8,product=6860,bcdDevice=400
<7>[ 5.422663] ,Class=0,SubClass=0,Protocol=0
<7>[ 5.422674] [c6] usb: enable_store next cmd : usb_add_config
<6>[ 5.424851] [c6] s5p-ehci 12110000.usb: EHCI turn off
<7>[ 5.424868] [c6] s5p-ehci 12110000.usb: s5p_ehci_runtime_resume
<7>[ 5.424883] [c6] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_runtime_resume
<6>[ 5.424953] [c6] samsung_usb2phy_runtime_resume: usage=1, child=0
<6>[ 5.424978] [c6] s5p_ehci_runtime_resume: usage=1, child=0
<7>[ 5.424996] [c6] usb usb1: usb auto-resume
<7>[ 5.425013] [c6] s5p-ehci 12110000.usb: resume root hub
<7>[ 5.425053] [c6] hub 1-0:1.0: hub_resume
<7>[ 5.425072] [c6] usb usb1: (1)send start USB_REQ_GET_STATUS
<7>[ 5.425102] [c6] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 5.425129] [c6] usb usb1: (3)send start USB_REQ_GET_STATUS
<7>[ 5.425217] [c2] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
<3>[ 5.428068] [c3] conn_gadget_poll() _conn_gadget_dev is offlined
<3>[ 5.428141] [c3] conn_gadget_poll() _conn_gadget_dev is offlined
<6>[ 5.461371] [c4] adb_open
<7>[ 5.461393] [c4] usb: android_bind_enabled_functions f:mtp
<7>[ 5.461409] [c4] usb: usb_string_id cdev(0xecab5080)->next_string_id=5
<7>[ 5.461422] [c4] [mtpg_function_bind] line = [1302]
<4>[ 5.461501] [c4] super speed mtp: IN/ep1in, OUT/ep1out
<7>[ 5.461517] [c4] usb: android_bind_enabled_functions f:acm
<7>[ 5.461532] [c4] usb: usb_string_id cdev(0xecab5080)->next_string_id=6
<7>[ 5.461547] [c4] usb: usb_string_id cdev(0xecab5080)->next_string_id=7
<7>[ 5.461560] [c4] usb: usb_string_id cdev(0xecab5080)->next_string_id=8
<6>[ 5.461583] [c4] DUN is registerd
<7>[ 5.461594] [c4] usb: android_bind_enabled_functions f:adb
<6>[ 5.461605] [c4] adb_bind_config
<4>[ 5.462378] [c5] macloader: macloader triggered
<4>[ 5.472926] [c6] macloader: Not yet wlan interface loaded
<6>[ 5.494326] [c5] sdcardfs: version 2.1.1
<6>[ 5.494343] [c5] sdcardfs: dev_name -> /data/privatemode
<6>[ 5.494356] [c5] sdcardfs: options -> uid=1000,gid=1000,wgid=1015,reserved_mb=20
<6>[ 5.494624] [c5] sdcardfs: mounted on top of /data/privatemode type ext4
<7>[ 5.494647] [c5] SELinux: initialized (dev sdcardfs, type sdcardfs), uses xattr
<6>[ 5.495425] [c7] sdcardfs: version 2.1.1
<6>[ 5.495438] [c7] sdcardfs: dev_name -> /data/media
<6>[ 5.495449] [c7] sdcardfs: options -> uid=1023,gid=1023,wgid=1015,derive=legacy,reserved_mb=20
<6>[ 5.496245] [c2] sdcardfs: created packagelist pkgld/3668
<6>[ 5.496672] [c2] sdcardfs: mounted on top of /data/media type ext4
<7>[ 5.496701] [c2] SELinux: initialized (dev sdcardfs, type sdcardfs), uses xattr
<6>[ 5.498214] [c4] sdcardfs: version 2.1.1
<6>[ 5.498227] [c4] sdcardfs: dev_name -> /data/knox/sdcard
<6>[ 5.498238] [c4] sdcardfs: options -> uid=1000,gid=1000,wgid=1015
<6>[ 5.498414] [c4] sdcardfs: mounted on top of /data/knox/sdcard type ext4
<7>[ 5.498438] [c4] SELinux: initialized (dev sdcardfs, type sdcardfs), uses xattr
<6>[ 5.498481] [c2] sdcardfs: read_package_list
<6>[ 5.518020] [c0] max77804_chgin_init_work
<6>[ 5.558737] [c1] vfsspi_open
<6>[ 5.561936] [c0] vfsspi_regulator_onoff: on ocp_en: enable
<4>[ 5.618124] [c2] wifi_platform_bus_enumerate device present 1
<3>[ 5.618153] [c2] dhd_wlan_set_carddetect: notify_func=c056ea7c, mmc_host_dev=edf27410, val=1
<6>[ 5.618172] [c2] dwmmc_exynos 12210000.dwmmc1: card inserted.
<6>[ 5.618223] [c2] mmc_host mmc1: card inserted
<6>[ 5.628087] [c2] s5p-ehci 12110000.usb: remove, state 1
<7>[ 5.628128] [c2] s5p-ehci 12110000.usb: roothub graceful disconnect
<6>[ 5.628156] [c2] usb usb1: USB disconnect, device number 1
<7>[ 5.628171] [c2] usb usb1: unregistering device
<7>[ 5.628185] [c2] usb usb1: unregistering interface 1-0:1.0
<7>[ 5.628375] [c2] s5p-ehci 12110000.usb: shutdown urb edf69380 ep1in-intr
<7>[ 5.633324] [c2] usb usb1: usb_disable_device nuking all URBs
<7>[ 5.688488] [c2] s5p-ehci 12110000.usb: stop
<7>[ 5.689051] [c2] s5p-ehci 12110000.usb: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
<7>[ 5.689313] [c2] s5p-ehci 12110000.usb: irq normal 0 err 0 iaa 0 (lost 0)
<7>[ 5.689332] [c2] s5p-ehci 12110000.usb: complete 0 unlink 0
<7>[ 5.689354] [c2] s5p-ehci 12110000.usb: ehci_stop completed status 1000 Halt
<6>[ 5.689418] [c2] s5p-ehci 12110000.usb: USB bus 1 deregistered
<7>[ 5.689467] [c2] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 5.689485] [c2] samsung_usb2phy_shutdown: usage=1, child=0
<6>[ 5.738101] [c2] MobiCore mcd: 702|VALIDATOR [KEY]: 3a70000f18370cce5747a8ecd931208586b727344a1629a6408d0d6a18d0b74b
<6>[ 5.739872] [c4] mif: misc_ioctl: umts_boot0: IOCTL_MODEM_ON
<6>[ 5.739893] [c4] mif: xmm6262_on:
<6>[ 5.743919] [c2] MobiCore mcd: 702|VALIDATOR [KEY]: ea03138b2cbe034ebcd39d7ecea1eec56a43a486d50964a309a47491d920b2d5
<6>[ 5.743947] [c2] MobiCore mcd: 702|VALIDATOR [KEY]: 00711c8a7519cef0e110d3f0d19eafb2f4ecf66da98b2a47154b0c0c43e37b08
<6>[ 5.744692] [c2] MobiCore mcd: 702|VALIDATOR [KEY]: 88d5ebc6af021643ed43d923c5f23295e935029a1d0957521d2968a37ba316d7
<6>[ 5.744719] [c2] MobiCore mcd: 702|VALIDATOR [KEY]: 7db8bce0f2ed98502a0da53c60567ea1c4b464027d55449b59cda8e5b5ed17ea
<6>[ 5.744738] [c2] MobiCore mcd: 702|VALIDATOR [KEY]: e8c9fda0001ff1ba6beb8c131f7c91701bae8b6539ee31435e55bfeffcfdf9a5
<6>[ 5.744755] [c2] MobiCore mcd: 702|VALIDATOR [KEY]: e4645cb7e8a076c859661502cf551394ef8c8808c7d178972e2419382eb63426
<6>[ 5.745168] [c2] MobiCore mcd: 702|VALIDATOR [KEY]: e4aae697ec2a6aa031802bf7121c57175673089c8e6ded92e41b3a83a0605b01
<6>[ 5.745580] [c2] MobiCore mcd: 702|VALIDATOR [IV]: 48bfb961b5b2baf5d80c27dabdf960b43dcf3e75514c331879048db7f24e3736
<6>[ 5.745602] [c2] MobiCore mcd: 702|VALIDATOR [IV]: ebf73cd6575b3987ad7e7213b6070842f0383228347949d0bcaa87a4176dc6da
<6>[ 5.746356] [c2] MobiCore mcd: 702|VALIDATOR [IV]: 0aca6126b8e69b4693da67809963716af2a52be4bee67c015f9560aa75783c95
<6>[ 5.746379] [c2] MobiCore mcd: 702|VALIDATOR [IV]: b0eb1bd8acffb8b3f835667243fa526c4a01683a99837b3a9336a317ec708c0d
<6>[ 5.746397] [c2] MobiCore mcd: 702|VALIDATOR [IV]: 5b9c0431bb702940fec7527521dbbf16f213161252a504b3a9cdd12e23abc262
<6>[ 5.746415] [c2] MobiCore mcd: 702|VALIDATOR [IV]: b177796407b21698d2bc194e5bec34e08cce20c5d3f5a7706fbd7fa90acc0d9d
<6>[ 5.746682] [c2] MobiCore mcd: 702|VALIDATOR [IV]: e139991f90930eacb5e684c3515fae509529af83cfc59abcdac2d5198c493d3f
<6>[ 5.747630] [c3] MobiCore mcd: 702|VALIDATOR [IV]: d81f17bd760b92a0a3c568c9b8c1af6d990978007d5f8b39a23d7226c54f7b16
<6>[ 5.748717] [c0] MobiCore mcd: 702|VALIDATOR 0x00000002 e48b25a9cc214a4125879d75b611adf4029b392e4b6ec1de70820df14791c44a
<6>[ 5.748743] [c0] MobiCore mcd: 702|VALIDATOR 0x00000002 f212f9ca36b145875770697d423342a81d95e1128677b90d9db93f69e7f4aeeb
<6>[ 5.749288] [c2] MobiCore mcd: 702|VALIDATOR 0x00000002 3d7923e4d5b9201bcd6bb318462471f30f645cd90cddc9e6dfc29e4ddcfd44d4
<6>[ 5.749312] [c2] MobiCore mcd: 702|VALIDATOR 0x00000002 0840c4675ea13659bf17076c72b03bacdb50b8349b3ec0225d980c42e7a72501
<6>[ 5.749835] [c0] MobiCore mcd: 702|VALIDATOR 0x00000002 baa4d3c1bbe615223e3ac62a71b0d607ea535803b84745f8e5ee8364c990588f
<6>[ 5.749855] [c0] MobiCore mcd: 702|VALIDATOR 0x00000002 976cf237c3571e1ff8d65a39be1c8d8937b26df4bfb3b538fd265ca148676c53
<6>[ 5.750658] [c2] MobiCore mcd: 702|VALIDATOR 0x00000002 46e0934c0fa7abe264f74b40f95559cccab2fbb58183a542542794e203ae6ebb
<6>[ 5.750685] [c2] MobiCore mcd: 702|VALIDATOR 0x00000010 ec7d6286aabecb7b788c4277aba526f3962eadd43c6993589501018a6c703ad8
<4>[ 5.864822] [c0] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[ 5.867806] [c0] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 5.869489] [c0] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<4>[ 5.875748] [c0] mmc1: queuing unknown CIS tuple 0x01 (17 bytes)
<6>[ 5.925265] [c7] mif: usb_init_communication: 3685:rild
<3>[ 5.925282] [c7] mif: misc_open: umts_boot0 (opened 2)
<6>[ 5.931762] [c0] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 400000Hz, actual 400000HZ div = 250)
<6>[ 5.931801] [c0] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
<6>[ 5.931841] [c0] dwmmc_exynos 12210000.dwmmc1: Tuning Abnormal_result 0x00003fff.
<3>[ 5.932182] [c0] dwmmc_exynos 12210000.dwmmc1: data CRC error READ
<6>[ 5.932241] [c0] mmc_host mmc1: Tuning error: cmd.error:0, data.error:-84
<6>[ 5.932350] [c0] mmc_host mmc1: Tuning error: cmd.error:-5, data.error:-115
<6>[ 5.932744] [c0] dwmmc_exynos 12210000.dwmmc1: divratio: 3 map: 0x 00003f9f
<6>[ 5.932760] [c0] dwmmc_exynos 12210000.dwmmc1: sample_good: 0x 3f9f best_sample: 0x 0b
<6>[ 5.932786] [c0] dwmmc_exynos 12210000.dwmmc1: CLKSEL = 0x03030045, EN_SHIFT = 0x00000000, DS(3) = 0x3.
<6>[ 5.949415] [c7] s5p-ehci 12110000.usb: EHCI turn on
<7>[ 5.949438] [c7] samsung-usb2phy 12130000.usb2phy: Can't configure specified phy mode
<6>[ 5.949577] [c7] samsung_usb2phy_init: usage=1, child=0
<7>[ 5.949594] [c7] samsung-usb2phy 12130000.usb2phy: end of samsung_usb2phy_init
<6>[ 5.949612] [c7] s5p-ehci 12110000.usb: EHCI Host Controller
<6>[ 5.949646] [c7] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
<7>[ 5.949675] [c7] s5p-ehci 12110000.usb: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
<7>[ 5.949694] [c7] s5p-ehci 12110000.usb: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
<7>[ 5.949750] [c7] s5p-ehci 12110000.usb: park 0
<7>[ 5.949777] [c7] s5p-ehci 12110000.usb: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 5.949819] [c7] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
<7>[ 5.949840] [c7] s5p-ehci 12110000.usb: init command 0010005 (park)=0 ithresh=1 period=512 RUN
<4>[ 5.952817] [c5] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
<6>[ 5.952885] [c5] mmc1: new ultra high speed SDR104 SDIO card at address 0001
<6>[ 5.958049] [c2] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
<7>[ 5.958350] [c2] usb usb1: default language 0x0409
<7>[ 5.958398] [c2] usb usb1: udev 1, busnum 1, minor = 0
<6>[ 5.958414] [c2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 5.958429] [c2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 5.958448] [c2] usb usb1: Product: EHCI Host Controller
<6>[ 5.958463] [c2] usb usb1: Manufacturer: Linux 3.10.9-4521975 ehci_hcd
<6>[ 5.958476] [c2] usb usb1: SerialNumber: 12110000.usb
<7>[ 5.959451] [c0] usb usb1: usb_probe_device
<7>[ 5.959475] [c0] usb usb1: configuration #1 chosen from 1 choice
<7>[ 5.959523] [c0] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[ 5.960157] [c0] hub 1-0:1.0: usb_probe_interface
<7>[ 5.960180] [c0] hub 1-0:1.0: usb_probe_interface - got id
<6>[ 5.960208] [c0] hub 1-0:1.0: USB hub found
<6>[ 5.960248] [c0] hub 1-0:1.0: 3 ports detected
<7>[ 5.960267] [c0] hub 1-0:1.0: standalone hub
<7>[ 5.960283] [c0] hub 1-0:1.0: individual port power switching
<7>[ 5.960300] [c0] hub 1-0:1.0: individual port over-current protection
<7>[ 5.960320] [c0] hub 1-0:1.0: power on to power good time: 20ms
<7>[ 5.960339] [c0] usb usb1: (0)send start USB_REQ_GET_STATUS
<7>[ 5.960365] [c0] usb usb1: (0)send start USB_REQ_GET_STATUS
<7>[ 5.960390] [c0] hub 1-0:1.0: local power source is good
<7>[ 5.960592] [c0] hub 1-0:1.0: enabling power on all ports
<6>[ 5.961328] [c4] mif: link_pm_ioctl: link_connected(0)
<3>[ 5.961363] [c4] mif: cbd: hsic_xmit_boot: check [BOOTROM] link connected = [0]
<4>[ 5.971772] [c7] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
<4>[ 5.972033] [c7] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
<4>[ 5.972047] [c7] bus num (host idx)=1, slot num (rca)=1
<4>[ 5.972059] [c7] found adapter info 'DHD generic adapter'
<4>[ 5.972128] [c7] alloc static buf at ed980000!
<4>[ 5.979992] [c0] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x0
<4>[ 5.980957] [c0] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
<4>[ 5.982621] [c3] wl_create_event_handler(): thread:wl_event_handler:e9d started
<6>[ 5.982642] [c1] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xee83d6a0
<6>[ 5.984250] [c0] [SSP]: show_sensors_enable - cur_enable = 0
<6>[ 5.984331] [c0] [SSP]: set_sensors_enable - new_enable = 64, old_enable = 0
<6>[ 5.984352] [c0] [SSP]: enable_sensor - add 64, New = 200000000ns
<6>[ 5.984370] [c0] [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x6, data = 200
<4>[ 5.984753] [c1] p2p0: P2P Interface Registered
<4>[ 5.984930] [c2] dhd_attach(): thread:dhd_watchdog_thread:ea3 started
<4>[ 5.985076] [c5] dhd_attach(): thread:dhd_dpc:ea4 started
<4>[ 5.985207] [c2] dhd_attach(): thread:dhd_rxf:ea5 started
<4>[ 5.985236] [c2] dhd_deferred_work_init: work queue initialized
<4>[ 5.985781] [c2] Dongle Host Driver, version 1.141.64.12 (r)
<4>[ 5.985781] Compiled in drivers/net/wireless/bcmdhd on May 21 2015 at 11:01:15
<4>[ 5.987162] [c2] Register interface [wlan0] MAC: 00:98:b0
<4>[ 5.987162]
<4>[ 5.987186] [c2] dhd_prot_ioctl : bus is down. we have nothing to do
<4>[ 5.987200] [c2] dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
<4>[ 5.987402] [c5] wifi_platform_set_power = 0
<6>[ 5.987418] [c5] ------------------------------------------------
<6>[ 5.987427] ------------------------------------------------
<6>[ 5.987438] [c5] dhd_wlan_power Enter: power off
<6>[ 5.990690] [c0] [SSP], delay 200, timeout 0, flag=0, ret1
<6>[ 5.990966] [SSP]: show_sensors_enable - cur_enable = 64
<6>[ 5.991022] [c0] [SSP]: set_sensors_enable - new_enable = 0, old_enable = 64
<6>[ 5.991040] [c0] [SSP]: ssp_remove_sensor - remove sensor = 64, current state = 0
<6>[ 5.991057] [c0] [SSP]: send_instruction - Inst = 0xa2, Sensor Type = 0x6, data = 200
<7>[ 6.058010] [c0] usb usb1: (1)send start USB_REQ_GET_STATUS
<7>[ 6.058058] [c0] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 6.058091] [c0] s5p-ehci 12110000.usb: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 6.058114] [c0] hub 1-0:1.0: port 2: status 0501 change 0001
<7>[ 6.058139] [c0] usb usb1: (3)send start USB_REQ_GET_STATUS
<6>[ 6.070055] [c5] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<6>[ 6.090508] Freeing unused kernel memory: 1036K (c0d00000 - c0e03000)
<7>[ 6.158054] [c1] hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
<7>[ 6.158084] [c1] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 6.158123] [c1] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
<6>[ 6.204256] [c4] s5p-decon-display 14400000.fimd_fb: + s3c_fb_blank mode 0
<6>[ 6.205058] [c4] s5p-decon-display 14400000.fimd_fb: +s5p_mipi_dsi_enable
<4>[ 6.205065] [c4] s3c_fb_enable +
<4>[ 6.205072] [c4] s3c_fb_enable -
<6>[ 6.205155] [c4] s5p-decon-display 14400000.fimd_fb: - s3c_fb_blank
<6>[ 6.205164] [c4] LCD is on
<7>[ 6.213035] [c1] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 6.213092] [c1] s5p-ehci 12110000.usb: port 2 reset complete, port enabled
<7>[ 6.213116] [c1] s5p-ehci 12110000.usb: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 6.268071] [c1] usb 1-2: new high-speed USB device number 2 using s5p-ehci
<4>[ 6.311422] [c1] healthd: batteryPogoOnlnePath not found
<4>[ 6.311456] [c1] healthd: batteryCapacitymaxPath not found
<6>[ 6.313746] [c1] healthd: battery l=88 v=4175 t=24.3 h=2 st=2 c=0 o=4 ca=450 ct=1 ps=0 hv=0 chg=u
<6>[ 6.313781] [c1] healthd-android: healthd_mode_android_battery_update
<6>[ 6.313811] [c1] BatteryPropertiesRegistrar: notifyListeners : start
<6>[ 6.313834] [c1] BatteryPropertiesRegistrar: notifyListeners : done
<7>[ 6.323015] [c7] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 6.323091] [c7] s5p-ehci 12110000.usb: port 2 reset complete, port enabled
<7>[ 6.323111] [c7] s5p-ehci 12110000.usb: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<4>[ 6.378182] [c2] mali 11800000.mali: state restore latency exceeded, new value 1079000 ns
<7>[ 6.398400] [c2] usb 1-2: USB quirks for this device: e00
<7>[ 6.399255] [c2] usb 1-2: skipped 3 descriptors after configuration
<7>[ 6.399280] [c2] usb 1-2: udev 2, busnum 1, minor = 1
<6>[ 6.399297] [c2] usb 1-2: New USB device found, idVendor=8087, idProduct=0716
<6>[ 6.399316] [c2] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
<7>[ 6.400753] [c2] usb 1-2: usb_probe_device
<7>[ 6.400776] [c2] usb 1-2: configuration #1 chosen from 1 choice
<7>[ 6.401134] [c2] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
<7>[ 6.401661] [c2] cdc_modem 1-2:1.0: usb_probe_interface
<7>[ 6.401683] [c2] cdc_modem 1-2:1.0: usb_probe_interface - got id
<6>[ 6.401731] [c2] mif: if_usb_probe: bind(cdc_acm_bind), pipe(0)
<3>[ 6.401745] [c2] mif: cdc_acm_bind: cdc-data desc - bootrom
<6>[ 6.401797] [c2] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 6.401810] [c2] mif: usb_defered_tx_purge_anchor: Previous TX packet purge
<6>[ 6.401825] [c2] mif: if_usb_probe: successfully done
<6>[ 6.402024] [c2] mif: xmm626x_linkpm_usb_notify: boot dev connected
<7>[ 6.423006] [c4] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<4>[ 6.450516] [c6] [INFO]display_hibernation_power_off: ##### +
<6>[ 6.450651] [c6] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 6.450869] [c0] [INFO]display_hibernation_power_off: ##### -
<4>[ 6.450869]
<6>[ 6.458223] [c6] COVER ACT 1 w1_master_attribute_show_verify_mac -1, slave_count: 0
<6>[ 6.458306] [c6] COVER ACT 2 w1_master_attribute_show_check_id 2
<6>[ 6.458951] [c6] COVER ACT 2 w1_master_attribute_show_check_model 1
<6>[ 6.461523] [c5] mif: link_pm_ioctl: link_connected(2)
<3>[ 6.461551] [c5] mif: cbd: hsic_xmit_boot: check [BOOTROM] link connected = [1]
<4>[ 6.482451] [c4] macloader: wlan interface loaded
<6>[ 6.487520] [c4] !@Boot: Need to check boot animation resolution. w=720, h=1280
<4>[ 6.492712] [c6] [INFO]display_hibernation_power_on: ##### +
<6>[ 6.493572] [c6] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 6.493754] [c1] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 6.493808] [c1] [INFO]display_hibernation_power_on: ##### -
<4>[ 6.493808]
<6>[ 6.494180] [c5] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<6>[ 6.563161] vfsspi_ioctl VFSSPI_IOCTL_REGISTER_DRDY_SIGNAL
<6>[ 6.597005] [c2] MobiCore mcd: a01|[Driver Template] drMain(): driver startedSEC_SPI_DRIVER_1.0_2014.04.24.
<6>[ 6.652564] [c2] MobiCore mcd: a01|[Driver Template] drExchLoop(): Exception handler thread is running
<6>[ 6.653153] [c0] MobiCore mcd: b01|Trustlet FingerPrint::Starting
<6>[ 6.660276] [c6] mif: link_pm_ioctl: link_connected(2)
<6>[ 6.663164] [c2] MobiCore mcd: b01|Trustlet Fingerprint::Got a message!
<6>[ 6.663185] [c2] MobiCore mcd: b01|FINGERPRINT commandId :18
<6>[ 6.663199] [c2] MobiCore mcd: b01|Trustlet Fingerprint::Returning 0
<6>[ 6.663222] [c2] MobiCore mcd: b01|Trustlet Fingerprint::Got a message!
<6>[ 6.663452] [c3] MobiCore mcd: b01|FINGERPRINT commandId :2
<6>[ 6.664304] [c0] MobiCore mcd: b01|ValidityLIB: scsSubsystem.c 1187 3
<6>[ 6.664719] [c0] MobiCore mcd: b01|ValidityLIB: scsSubsystem.c 1187 3
<6>[ 6.664740] [c0] MobiCore mcd: b01|ValidityLIB: scsSubsystem.c 1187 3
<6>[ 6.665330] [c0] MobiCore mcd: b01|ValidityLIB: scsSubsystem.c 1187 3
<6>[ 6.665349] [c0] MobiCore mcd: b01|ValidityLIB: scsSubsystem.c 1187 3
<6>[ 6.666020] [c0] MobiCore mcd: b01|ValidityLIB: scsSubsystem.c 1187 3
<6>[ 6.666489] [c0] MobiCore mcd: b01|ValidityLIB: scsSubsystem.c 1187 3
<6>[ 6.666769] [c2] MobiCore mcd: b01|ValidityLIB: scsSubsystem.c 1187 3
<6>[ 6.666785] [c2] MobiCore mcd: b01|Trustlet Fingerprint::Returning 0
<6>[ 6.667095] [c0] vfsspi_ioctl ENABLE_SPI_CLOCK
<6>[ 6.667504] [c0] [sec_dma_prepare]device_name:121b0000.pdma
<6>[ 6.668095] [c2] MobiCore mcd: b01|Trustlet Fingerprint::Got a message!
<6>[ 6.668121] [c2] MobiCore mcd: b01|FINGERPRINT commandId :4
<6>[ 6.676896] [c0] MobiCore mcd: b01|ValidityLIB: scs.c 2359 3
<6>[ 6.677619] [c0] MobiCore mcd: b01|ValidityLIB: scsSensor.c 3381 3
<6>[ 6.711649] [c6] MobiCore mcd: b01|Trustlet Fingerprint::Returning 0
<6>[ 6.711809] [c6] vfsspi_ioctl DISABLE_SPI_CLOCK
<6>[ 6.711869] [c6] vfsspi_ioctl ENABLE_SPI_CLOCK
<6>[ 6.712153] [c6] [sec_dma_prepare]device_name:121b0000.pdma
<6>[ 6.712728] [c0] MobiCore mcd: b01|Trustlet Fingerprint::Got a message!
<6>[ 6.712983] [c0] MobiCore mcd: b01|FINGERPRINT commandId :5
<6>[ 6.714114] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 8165 3
<6>[ 6.714132] [c0] MobiCore mcd: b01|ValidityLIB: scs.c 5624 2
<6>[ 6.892439] [c7] !@Boot: beginofpreloadClasses()
<6>[ 6.893633] [c5] !@Boot: beginofpreloadResources()
<3>[ 6.925443] [c7] mif: misc_release: umts_boot0 (opened 1)
<6>[ 6.925498] [c7] mif: usb_init_communication: 3685:rild
<3>[ 6.925511] [c7] mif: misc_open: umts_boot0 (opened 2)
<6>[ 7.345055] [c5] florida-codec florida-codec: set aif2 mode: Master
<6>[ 7.387194] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.387216] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.387556] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.387574] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.388138] [c2] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.388158] [c2] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.388174] [c2] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.388860] [c2] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.388880] [c2] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.388898] [c2] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.388915] [c2] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 4159 3
<6>[ 7.388931] [c2] MobiCore mcd: b01|ValidityLIB: calResultsUtils.c 1453 3
<6>[ 7.389130] [c3] MobiCore mcd: b01|ValidityLIB: calResultsUtils.c 1453 3
<6>[ 7.503852] [c6] !@prldclssM: 1599 classes in 538ms.
<6>[ 7.523252] [c7] !@prldclss2: 700 classes in 556ms.
<6>[ 7.674734] [c6] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<6>[ 7.675806] [c6] [d:0] s5p_mfc_alloc_firmware:120: Port for DRM F/W : 0xb3300000
<6>[ 7.691527] [c6] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.692034] [c6] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.693609] [c6] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 7.698385] [c5] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.698507] [c5] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.698554] [c5] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = eab27000
<6>[ 7.698669] [c5] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 7.698869] [c5] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<6>[ 7.709202] [c4] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<6>[ 7.721263] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 5546 3
<6>[ 7.721298] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 5678 3
<6>[ 7.721337] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 5684 3
<6>[ 7.722439] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 5678 3
<6>[ 7.722464] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 5684 3
<6>[ 7.722755] [c5] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.723246] [c5] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.724727] [c5] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 7.725380] [c5] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.725573] [c5] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.725622] [c5] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = eaaba000
<6>[ 7.725713] [c5] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 7.725905] [c5] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<6>[ 7.730573] [c5] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<6>[ 7.740558] [c6] !@prldclss1: 710 classes in 776ms.
<6>[ 7.743990] [c4] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.744525] [c4] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.745983] [c4] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 7.746518] [c4] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.746653] [c4] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.746692] [c4] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = eac5b000
<6>[ 7.746779] [c4] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 7.746995] [c4] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<6>[ 7.752402] [c4] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<6>[ 7.766493] [c7] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.767237] [c7] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.768769] [c7] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 7.769330] [c7] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.769448] [c7] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.769489] [c7] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = eaab9800
<6>[ 7.769570] [c7] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 7.769769] [c7] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<6>[ 7.778708] [c4] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<6>[ 7.791012] [c4] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.797706] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 6236 3
<6>[ 7.797734] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 6073 3
<6>[ 7.798098] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 6079 3
<6>[ 7.798477] [c0] MobiCore mcd: b01|ValidityLIB: scsFalconCal.c 6105 3
<6>[ 7.799631] [c4] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.801241] [c4] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 7.801828] [c4] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.802000] [c4] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.802062] [c4] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = eaab9000
<6>[ 7.802191] [c4] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 7.802492] [c4] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<6>[ 7.810087] [c4] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<6>[ 7.812378] [c1] MobiCore mcd: b01|ValidityLIB: scs.c 9202 3
<6>[ 7.824239] [c4] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.824895] [c4] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.827469] [c4] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 7.828927] [c4] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.829060] [c4] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.829103] [c4] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = eaab9000
<6>[ 7.829198] [c4] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 7.829380] [c4] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<6>[ 7.843468] [c5] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<6>[ 7.857025] [c7] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.857637] [c7] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.868277] [c1] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 7.868723] [c1] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.868829] [c1] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.868882] [c1] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = eac5b800
<6>[ 7.869003] [c1] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 7.869245] [c1] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<6>[ 7.872394] [c3] MobiCore mcd: b01|Trustlet Fingerprint::Returning 0
<6>[ 7.872836] [c0] vfsspi_ioctl DISABLE_SPI_CLOCK
<6>[ 7.873084] [c0] vfsspi_ioctl: orient is 1(0: normal, 1: upsidedown)
<6>[ 7.875040] [c0] vfsspi_suspend
<6>[ 7.875067] [c0] vfsspi_ioctl VFSSPI_IOCTL_POWER_OFF
<6>[ 7.875102] [c0] vfsspi_regulator_onoff: off ocp_en: enable
<6>[ 7.875792] [c3] MobiCore mcd: b01|Trustlet Fingerprint::Got a message!
<6>[ 7.875811] [c3] MobiCore mcd: b01|FINGERPRINT commandId :3
<6>[ 7.875827] [c3] MobiCore mcd: b01|ValidityLIB: scsWitHandlers.c 520 3
<6>[ 7.876106] [c4] MobiCore mcd: b01|Trustlet Fingerprint::Returning 0
<6>[ 7.880407] [c0] MobiCore mcd: a02|[IPC] MSG_CLOSE_DRIVER
<6>[ 7.880429] [c0] MobiCore mcd: 501|drTima: MSG_CLOSE_TRUSTLET call 0x40001
<6>[ 7.882240] [c4] MobiCore mcd: 501|drTima: MSG_CLOSE_TRUSTLET call 0x40001
<6>[ 7.948291] [c2] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<6>[ 7.981487] [c7] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.982034] [c7] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.983636] [c7] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 7.988435] [c5] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 7.988565] [c5] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 7.988617] [c5] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = eb001800
<6>[ 7.988722] [c5] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 7.988971] [c5] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<6>[ 7.994083] [c5] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<6>[ 8.007481] [c5] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 8.008487] [c5] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 8.009929] [c5] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 8.010431] [c5] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 8.010526] [c5] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 8.010570] [c5] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = e9650000
<6>[ 8.010670] [c5] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 8.010970] [c5] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<7>[ 8.011105] [c0] s5p-ehci 12110000.usb: detected XactErr(cmd:0) len 0/16384 retry 1
<7>[ 8.011219] [c0] s5p-ehci 12110000.usb: detected XactErr(cmd:0) len 0/16384 retry 2
<7>[ 8.011346] [c0] s5p-ehci 12110000.usb: detected XactErr(cmd:0) len 0/16384 retry 3
<7>[ 8.011473] [c0] s5p-ehci 12110000.usb: devpath 2 ep3in 3strikes
<3>[ 8.011501] [c0] mif: usb_rx_complete: urb error status = -71
<6>[ 8.023564] [c4] [d:0, c:0] s5p_mfc_open:2104: NORMAL instance is opened [0:1]
<4>[ 8.037773] [c7] s5p-mfc 11000000.mfc: state restore latency exceeded, new value 839750 ns
<6>[ 8.059483] [c7] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 8.063664] [c4] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 8.065809] [c4] [d:0] s5p_mfc_init_memctrl:302: [2] Base Address : b3300000
<6>[ 8.066373] [c4] [d:0] mfc_init_hw:424: MFC v8.0, F/W: 15yy, 03mm, 20dd (E)
<6>[ 8.066558] [c4] [d:0] s5p_mfc_init_memctrl:302: [1] Base Address : 10000000
<6>[ 8.066624] [c4] [d:0, c:0] s5p_mfc_open:2208: MFC open completed [0:1] dev = eebd6810, ctx = eaaba000
<6>[ 8.066769] [c4] [d:0, c:0] s5p_mfc_release:2304: MFC driver release is called [0:1], is_drm(0)
<6>[ 8.067375] [c4] [d:0] s5p_mfc_release:2513: mfc driver release finished [0:0], dev = eebd6810
<4>[ 8.068608] [c1] [INFO]display_hibernation_power_off: ##### +
<6>[ 8.068746] [c1] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 8.068948] [c1] [INFO]display_hibernation_power_off: ##### -
<4>[ 8.068948]
<4>[ 8.070408] [c2] [INFO]display_hibernation_power_on: ##### +
<6>[ 8.070996] [c3] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 8.071209] [c6] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 8.071270] [c6] [INFO]display_hibernation_power_on: ##### -
<4>[ 8.071270]
<6>[ 8.088431] [c3] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<6>[ 8.096265] !@Boot: EndofpreloadClasses()
<6>[ 8.196138] [c4] !@Boot: beginofpreparewebview()
<6>[ 8.199786] [c6] !@Boot: endofpreparewebview()
<6>[ 8.276693] [c5] i2s_startup : sec ++
<6>[ 8.276740] [c5] lpass_set_sched: [AudioOut_2] pid = 3956, prio = 49
<6>[ 8.277106] [c1] i2s_startup : sec --
<6>[ 8.277130] [c1] dma_open: prtd = ec553f80
<6>[ 8.277153] [c1] pacific-audio sound.21: playback-sec-0 startup ++, playback=0, capture=0
<6>[ 8.277269] [c1] pacific-audio sound.21: playback-sec-0 2ch, 48000Hz, 15360bytes
<4>[ 8.277375] [c0] arizona spi2.0: Spurious HPDET IRQ
<3>[ 8.277585] [c0] arizona spi2.0: Mixer dropped sample
<6>[ 8.294748] [c1] lpass_set_sched: [AudioOut_2] pid = 3956, prio = 49
<6>[ 8.294898] [c1] ADMA:P:DmaAddr=@3000000 Total=15360 PrdSz=3840(3840) #Prds=4 dma_area=0xf1880000
<6>[ 8.297404] [c1] Entered dma_prepare
<6>[ 8.297441] [c1] Entered dma_enqueue
<6>[ 8.303193] [c6] pacific-audio sound.21: mclk enabled
<6>[ 8.311052] [c7] s5p-ehci 12110000.usb: EHCI turn off
<3>[ 8.321022] [c0] arizona spi2.0: ASRC underclocked
<6>[ 8.346827] [c6] arizona spi2.0: DSP1: florida-dsp1-edac.wmfw: Mon 17 Feb 2014 20:25:12 GMT Standard Time
<6>[ 8.353396] [c5] !@Boot: End of preloadResources()
<6>[ 8.373608] [c0] arizona spi2.0: DSP1: Firmware: 40019 v1.10.0, 1 algorithms
<6>[ 8.376015] [c5] arizona spi2.0: DSP1: 0: ID fffe v0.0.0 XM@27 YM@bbf ZM@3f6
<4>[ 8.422623] [c5] [INFO]display_hibernation_power_off: ##### +
<6>[ 8.422755] [c5] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 8.423055] [c6] [INFO]display_hibernation_power_off: ##### -
<4>[ 8.423055]
<4>[ 8.423461] [c4] [INFO]display_hibernation_power_on: ##### +
<6>[ 8.424142] [c4] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 8.424349] [c4] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 8.424399] [c4] [INFO]display_hibernation_power_on: ##### -
<4>[ 8.424399]
<6>[ 8.441615] [c5] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<6>[ 8.513060] s5p-ehci 12110000.usb: remove, state 1
<7>[ 8.513092] [c4] s5p-ehci 12110000.usb: roothub graceful disconnect
<6>[ 8.513114] [c4] usb usb1: USB disconnect, device number 1
<6>[ 8.513128] [c4] usb 1-2: USB disconnect, device number 2
<7>[ 8.513141] [c4] usb 1-2: unregistering device
<7>[ 8.513154] [c4] usb 1-2: unregistering interface 1-2:1.0
<6>[ 8.513466] [c4] mif: if_usb_disconnect: unbind(cdc_acm_unbind)
<7>[ 8.513965] [c2] usb 1-2: usb_disable_device nuking all URBs
<6>[ 8.514619] [c6] mif: xmm626x_linkpm_usb_notify: boot dev disconnected
<7>[ 8.515106] [c6] usb usb1: unregistering device
<7>[ 8.515122] [c6] usb usb1: unregistering interface 1-0:1.0
<7>[ 8.515345] [c6] s5p-ehci 12110000.usb: shutdown urb ed6b7680 ep1in-intr
<7>[ 8.515938] [c3] usb usb1: usb_disable_device nuking all URBs
<7>[ 8.553981] [c3] s5p-ehci 12110000.usb: stop
<7>[ 8.554854] [c5] s5p-ehci 12110000.usb: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
<7>[ 8.555109] [c5] s5p-ehci 12110000.usb: irq normal 901 err 4 iaa 20 (lost 0)
<7>[ 8.555123] [c5] s5p-ehci 12110000.usb: complete 906 unlink 0
<7>[ 8.555138] [c5] s5p-ehci 12110000.usb: ehci_stop completed status 1000 Halt
<6>[ 8.555174] [c5] s5p-ehci 12110000.usb: USB bus 1 deregistered
<7>[ 8.555207] [c5] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 8.555219] [c5] samsung_usb2phy_shutdown: usage=1, child=0
<6>[ 8.603264] [c6] !@Boot: Entered the Android system server!
<4>[ 8.928529] [c2] [INFO]display_hibernation_power_off: ##### +
<6>[ 8.928679] [c2] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 8.928985] [c1] [INFO]display_hibernation_power_off: ##### -
<4>[ 8.928985]
<4>[ 8.946337] [c1] [INFO]display_hibernation_power_on: ##### +
<6>[ 8.947103] [c7] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 8.947307] [c7] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 8.947354] [c7] [INFO]display_hibernation_power_on: ##### -
<4>[ 8.947354]
<6>[ 8.967893] [c7] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<6>[ 9.046610] [SSP]: show_sensors_enable - cur_enable = 0
<6>[ 9.046664] [c7] [SSP]: set_sensors_enable - new_enable = 128, old_enable = 0
<6>[ 9.046787] [c7] [SSP]: proximity_open_lcd_ldi - 62
<3>[ 9.049655] [c7] [SSP]: proximity_open_calibration - Can't read the cancel data
<6>[ 9.049669] [c7] [SSP] proximity_open_calibration: proximity ps_canc = 0, ps_thresh hi - 130 lo - 90
<3>[ 9.049682] [c7] [SSP]: set_proximity_threshold - SENSOR_PROXTHRESHOL
<6>[ 9.056131] [SSP]: Proximity Threshold - 130, 90
<6>[ 9.056145] [c7] [SSP]: enable_sensor - add 128, New = 200000000ns
<6>[ 9.056158] [c7] [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x7, data = 200
<6>[ 9.062484] [c7] [SSP], delay 200, timeout 0, flag=0, ret1
<6>[ 9.062575] [SSP]: proximity_open_lcd_ldi - 62
<3>[ 9.062618] [c7] [SSP]: proximity_open_calibration - Can't read the cancel data
<6>[ 9.062630] [c7] [SSP] proximity_open_calibration: proximity ps_canc = 0, ps_thresh hi - 130 lo - 90
<3>[ 9.062643] [c7] [SSP]: set_proximity_threshold - SENSOR_PROXTHRESHOL
<6>[ 9.069005] [SSP]: Proximity Threshold - 130, 90
<6>[ 9.070155] [c7] [SSP]: show_sensors_enable - cur_enable = 128
<6>[ 9.070220] [c7] [SSP]: set_sensors_enable - new_enable = 640, old_enable = 128
<6>[ 9.070236] [c7] [SSP]: enable_sensor - add 512, New = 200000000ns
<6>[ 9.070250] [c7] [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x9, data = 200
<6>[ 9.084026] [SSP] Proximity Sensor Detect : 0, raw : 5
<6>[ 9.084091] [c0] [SSP]: MSG From MCU - AT-SetT 0:0:0.0
<6>[ 9.084091] Init
<6>[ 9.084091] Gyro Temp Init
<6>[ 9.084091] LT InitSRA 300
<6>[ 9.084091] [APDR LT] INIT 0217-3
<6>[ 9.084091] ### CG MI
<6>[ 9.084091] #AS MI
<6>[ 9.084091]
<6>[ 9.084091] [INVN]ACCEL_MGMT2 : 63
<6>[ 9.084091] #>GEP
<6>[ 9.084091] #>PRP
<6>[ 9.084091] #>LIGP
<6>[ 9.084091] #>LCHIP 0x0
<6>[ 9.084091] #>PRP
<6>[ 9.084091] PIN
<6>[ 9.084091] #>GEO
<6>[ 9.084091] #>gUp=0,gLo=0
<6>[ 9.084091] AD 6 1 0 1, -1
<6>[ 9.084091] #>GEC
<6>[ 9.084091] RM 6 0 0 0 -1
<6>[ 9.084091] #>THSET 130 90
<6>[ 9.084091] #>PRO
<6>[ 9.084091] AD 7 1 0 1, -1
<6>[ 9.084091] #>LIGO
<6>[ 9.076649] [c7] [SSP], delay 200, timeout 0, flag=0, ret1
<6>[ 9.096922] [c6] [SSP]: show_sensors_enable - cur_enable = 640
<6>[ 9.096978] [c6] [SSP]: set_sensors_enable - new_enable = 8832, old_enable = 640
<6>[ 9.096992] [c6] [SSP]: enable_sensor - add 8192, New = 200000000ns
<6>[ 9.097007] [c6] [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0xd, data = 200
<6>[ 9.103393] [c6] [SSP], delay 200, timeout 0, flag=0, ret1
<6>[ 9.128648] [SSP]: show_sensors_enable - cur_enable = 8832
<6>[ 9.128699] [c7] [SSP]: set_sensors_enable - new_enable = 139904, old_enable = 8832
<6>[ 9.128713] [c7] [SSP]: enable_sensor - add 131072, New = 200000000ns
<6>[ 9.128731] [c7] [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x11, data = 200
<6>[ 9.135062] [c7] [SSP], delay 200, timeout 0, flag=0, ret1
<6>[ 9.143352] [SSP]: show_sensors_enable - cur_enable = 139904
<6>[ 9.143404] [c4] [SSP]: set_sensors_enable - new_enable = 139776, old_enable = 139904
<6>[ 9.143416] [c4] [SSP]: ssp_remove_sensor - remove sensor = 128, current state = 139776
<6>[ 9.143430] [c4] [SSP]: send_instruction - Inst = 0xa2, Sensor Type = 0x7, data = 200
<6>[ 9.150033] [c4] [SSP]: show_sensors_enable - cur_enable = 139776
<6>[ 9.150208] [c4] [SSP]: set_sensors_enable - new_enable = 139264, old_enable = 139776
<6>[ 9.150225] [c4] [SSP]: ssp_remove_sensor - remove sensor = 512, current state = 139264
<6>[ 9.150239] [c4] [SSP]: send_instruction - Inst = 0xa2, Sensor Type = 0x9, data = 200
<6>[ 9.156688] [c4] [SSP]: show_sensors_enable - cur_enable = 139264
<6>[ 9.156751] [c4] [SSP]: set_sensors_enable - new_enable = 8192, old_enable = 139264
<6>[ 9.156765] [c4] [SSP]: ssp_remove_sensor - remove sensor = 131072, current state = 8192
<6>[ 9.156779] [c4] [SSP]: send_instruction - Inst = 0xa2, Sensor Type = 0x11, data = 200
<6>[ 9.163381] [c4] [SSP]: show_sensors_enable - cur_enable = 8192
<6>[ 9.163442] [c4] [SSP]: set_sensors_enable - new_enable = 0, old_enable = 8192
<6>[ 9.163455] [c4] [SSP]: ssp_remove_sensor - remove sensor = 8192, current state = 0
<6>[ 9.163469] [c4] [SSP]: send_instruction - Inst = 0xa2, Sensor Type = 0xd, data = 200
<4>[ 9.181481] [c1] [INFO]display_hibernation_power_off: ##### +
<6>[ 9.181618] [c1] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 9.181892] [c7] [INFO]display_hibernation_power_off: ##### -
<4>[ 9.181892]
<4>[ 9.183364] [c2] [INFO]display_hibernation_power_on: ##### +
<6>[ 9.183990] [c6] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 9.184166] [c6] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 9.184217] [c6] [INFO]display_hibernation_power_on: ##### -
<4>[ 9.184217]
<6>[ 9.199345] [c6] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<4>[ 9.687362] [INFO]display_hibernation_power_off: ##### +
<6>[ 9.687503] [c1] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 9.687708] [c1] [INFO]display_hibernation_power_off: ##### -
<4>[ 9.687708]
<4>[ 9.688587] [c1] [INFO]display_hibernation_power_on: ##### +
<6>[ 9.689219] [c5] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 9.689404] [c2] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 9.689449] [c2] [INFO]display_hibernation_power_on: ##### -
<4>[ 9.689449]
<6>[ 9.705120] [c3] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<6>[ 9.921682] !@Boot: Start PackageManagerService
<6>[ 10.004357] [c0] mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0
<6>[ 10.004381] [c0] mif: io_dev_modem_state_changed: umts_ipc0: xmm6360 state changed (state 3)
<6>[ 10.004393] [c0] mif: io_dev_modem_state_changed: umts_boot0: xmm6360 state changed (state 3)
<4>[ 10.193253] [c0] [INFO]display_hibernation_power_off: ##### +
<6>[ 10.193392] [c0] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 10.193798] [c4] [INFO]display_hibernation_power_off: ##### -
<4>[ 10.193798]
<4>[ 10.198270] [c1] [INFO]display_hibernation_power_on: ##### +
<6>[ 10.198835] [c1] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 10.199037] [c2] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 10.199083] [c2] [INFO]display_hibernation_power_on: ##### -
<4>[ 10.199083]
<6>[ 10.211372] [c4] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<4>[ 10.597985] [INFO]display_hibernation_power_off: ##### +
<6>[ 10.598142] [c6] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 10.598519] [c6] [INFO]display_hibernation_power_off: ##### -
<4>[ 10.598519]
<4>[ 10.600526] [c3] [INFO]display_hibernation_power_on: ##### +
<6>[ 10.601123] [c3] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 10.601336] [c4] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 10.601400] [c4] [INFO]display_hibernation_power_on: ##### -
<4>[ 10.601400]
<6>[ 10.606978] [c4] s5p-ehci 12110000.usb: EHCI turn on
<7>[ 10.606997] [c4] samsung-usb2phy 12130000.usb2phy: Can't configure specified phy mode
<6>[ 10.607130] [c4] samsung_usb2phy_init: usage=1, child=0
<7>[ 10.607140] [c4] samsung-usb2phy 12130000.usb2phy: end of samsung_usb2phy_init
<6>[ 10.607152] [c4] s5p-ehci 12110000.usb: EHCI Host Controller
<6>[ 10.607181] [c4] s5p-ehci 12110000.usb: new USB bus registered, assigned bus number 1
<7>[ 10.607202] [c4] s5p-ehci 12110000.usb: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
<7>[ 10.607215] [c4] s5p-ehci 12110000.usb: reset hcc_params 2a016 thresh 1 uframes 256/512/1024 park LPM
<7>[ 10.607495] [c4] s5p-ehci 12110000.usb: park 0
<7>[ 10.607520] [c4] s5p-ehci 12110000.usb: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 10.607556] [c4] s5p-ehci 12110000.usb: irq 103, io mem 0x12110000
<7>[ 10.607572] [c4] s5p-ehci 12110000.usb: init command 0010005 (park)=0 ithresh=1 period=512 RUN
<6>[ 10.613051] [c1] s5p-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
<7>[ 10.613414] [c1] usb usb1: default language 0x0409
<7>[ 10.613464] [c1] usb usb1: udev 1, busnum 1, minor = 0
<6>[ 10.613486] [c1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 10.613504] [c1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 10.613521] [c1] usb usb1: Product: EHCI Host Controller
<6>[ 10.613541] [c1] usb usb1: Manufacturer: Linux 3.10.9-4521975 ehci_hcd
<6>[ 10.613556] [c1] usb usb1: SerialNumber: 12110000.usb
<7>[ 10.614768] [c1] usb usb1: usb_probe_device
<7>[ 10.614789] [c1] usb usb1: configuration #1 chosen from 1 choice
<7>[ 10.614841] [c1] usb usb1: adding 1-0:1.0 (config #1, interface 0)
<7>[ 10.615382] [c7] hub 1-0:1.0: usb_probe_interface
<7>[ 10.615397] [c7] hub 1-0:1.0: usb_probe_interface - got id
<6>[ 10.615416] [c7] hub 1-0:1.0: USB hub found
<6>[ 10.615442] [c7] hub 1-0:1.0: 3 ports detected
<7>[ 10.615453] [c7] hub 1-0:1.0: standalone hub
<7>[ 10.615463] [c7] hub 1-0:1.0: individual port power switching
<7>[ 10.615473] [c7] hub 1-0:1.0: individual port over-current protection
<7>[ 10.615483] [c7] hub 1-0:1.0: power on to power good time: 20ms
<7>[ 10.615494] [c7] usb usb1: (0)send start USB_REQ_GET_STATUS
<7>[ 10.615512] [c7] usb usb1: (0)send start USB_REQ_GET_STATUS
<7>[ 10.615529] [c7] hub 1-0:1.0: local power source is good
<7>[ 10.615688] [c7] hub 1-0:1.0: enabling power on all ports
<6>[ 10.615925] [c7] mif: link_pm_ioctl: link_connected(0)
<6>[ 10.616224] [c1] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<7>[ 10.718014] usb usb1: (1)send start USB_REQ_GET_STATUS
<7>[ 10.718043] [c7] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 10.718063] [c7] s5p-ehci 12110000.usb: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 10.718085] [c7] hub 1-0:1.0: port 2: status 0501 change 0001
<7>[ 10.718110] [c7] usb usb1: (3)send start USB_REQ_GET_STATUS
<7>[ 10.818060] [c4] hub 1-0:1.0: state 7 ports 3 chg 0004 evt 0000
<7>[ 10.818087] [c4] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 10.818119] [c4] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
<7>[ 10.873013] [c3] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 10.873077] [c3] s5p-ehci 12110000.usb: port 2 reset complete, port enabled
<7>[ 10.873100] [c3] s5p-ehci 12110000.usb: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 10.928045] [c3] usb 1-2: new high-speed USB device number 2 using s5p-ehci
<7>[ 10.983055] [c1] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 10.983204] [c1] s5p-ehci 12110000.usb: port 2 reset complete, port enabled
<7>[ 10.983226] [c1] s5p-ehci 12110000.usb: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<7>[ 11.059167] [c4] usb 1-2: USB quirks for this device: e00
<7>[ 11.067207] [c7] usb 1-2: skipped 1 descriptor after configuration
<7>[ 11.067236] [c7] usb 1-2: skipped 4 descriptors after interface
<7>[ 11.067250] [c7] usb 1-2: skipped 1 descriptor after endpoint
<7>[ 11.067262] [c7] usb 1-2: skipped 4 descriptors after interface
<7>[ 11.067275] [c7] usb 1-2: skipped 1 descriptor after endpoint
<7>[ 11.067288] [c7] usb 1-2: skipped 4 descriptors after interface
<7>[ 11.067300] [c7] usb 1-2: skipped 1 descriptor after endpoint
<7>[ 11.067312] [c7] usb 1-2: skipped 4 descriptors after interface
<7>[ 11.067324] [c7] usb 1-2: skipped 1 descriptor after endpoint
<7>[ 11.067336] [c7] usb 1-2: skipped 4 descriptors after interface
<7>[ 11.067348] [c7] usb 1-2: skipped 1 descriptor after endpoint
<7>[ 11.067361] [c7] usb 1-2: skipped 4 descriptors after interface
<7>[ 11.067374] [c7] usb 1-2: skipped 1 descriptor after endpoint
<7>[ 11.067387] [c7] usb 1-2: skipped 4 descriptors after interface
<7>[ 11.068258] [c1] usb 1-2: default language 0x0409
<7>[ 11.072133] [c0] usb 1-2: udev 2, busnum 1, minor = 1
<6>[ 11.072187] [c0] usb 1-2: New USB device found, idVendor=1519, idProduct=0443
<6>[ 11.072203] [c0] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 11.072216] [c0] usb 1-2: Product: 3 CDC-ACM + 4 CDC-NCM
<6>[ 11.072230] [c0] usb 1-2: Manufacturer: Comneon
<6>[ 11.072243] [c0] usb 1-2: SerialNumber: 353296061099013 - USB-HSIC
<7>[ 11.073307] [c2] usb 1-2: usb_probe_device
<7>[ 11.073334] [c2] usb 1-2: configuration #1 chosen from 1 choice
<7>[ 11.093978] [c4] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
<7>[ 11.096709] [c3] cdc_modem 1-2:1.0: usb_probe_interface
<7>[ 11.096736] [c3] cdc_modem 1-2:1.0: usb_probe_interface - got id
<6>[ 11.096779] [c3] mif: if_usb_probe: bind(cdc_acm_bind), pipe(0)
<6>[ 11.096831] [c3] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 11.096877] [c3] mif: if_usb_probe: successfully done
<7>[ 11.097006] [c3] usb 1-2: adding 1-2:1.1 (config #1, interface 1)
<7>[ 11.098233] [c0] usb 1-2: adding 1-2:1.2 (config #1, interface 2)
<7>[ 11.099534] [c5] cdc_modem 1-2:1.2: usb_probe_interface
<7>[ 11.099556] [c5] cdc_modem 1-2:1.2: usb_probe_interface - got id
<6>[ 11.099596] [c5] mif: if_usb_probe: bind(cdc_acm_bind), pipe(1)
<6>[ 11.099642] [c5] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 11.099695] [c5] mif: if_usb_probe: successfully done
<7>[ 11.099830] [c5] usb 1-2: adding 1-2:1.3 (config #1, interface 3)
<7>[ 11.101170] [c2] usb 1-2: adding 1-2:1.4 (config #1, interface 4)
<7>[ 11.102466] [c4] cdc_modem 1-2:1.4: usb_probe_interface
<7>[ 11.102490] [c4] cdc_modem 1-2:1.4: usb_probe_interface - got id
<6>[ 11.102530] [c4] mif: if_usb_probe: bind(cdc_acm_bind), pipe(2)
<6>[ 11.102578] [c4] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 11.102631] [c4] mif: if_usb_probe: successfully done
<7>[ 11.102759] [c4] usb 1-2: adding 1-2:1.5 (config #1, interface 5)
<7>[ 11.104273] [c0] usb 1-2: adding 1-2:1.6 (config #1, interface 6)
<7>[ 11.106647] [c1] cdc_modem 1-2:1.6: usb_probe_interface
<7>[ 11.106673] [c1] cdc_modem 1-2:1.6: usb_probe_interface - got id
<6>[ 11.106711] [c1] mif: if_usb_probe: bind(xmm6360_cdc_ncm_bind), pipe(3)
<6>[ 11.112732] [c6] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 11.112787] [c6] mif: if_usb_probe: successfully done
<7>[ 11.112913] [c6] usb 1-2: adding 1-2:1.7 (config #1, interface 7)
<7>[ 11.114215] [c1] usb 1-2: adding 1-2:1.8 (config #1, interface 8)
<7>[ 11.115826] [c5] cdc_modem 1-2:1.8: usb_probe_interface
<7>[ 11.115847] [c5] cdc_modem 1-2:1.8: usb_probe_interface - got id
<6>[ 11.115878] [c5] mif: if_usb_probe: bind(xmm6360_cdc_ncm_bind), pipe(4)
<6>[ 11.116089] [c3] mif: link_pm_ioctl: link_connected(0)
<6>[ 11.121616] [c3] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 11.121664] [c3] mif: if_usb_probe: successfully done
<7>[ 11.121812] [c3] usb 1-2: adding 1-2:1.9 (config #1, interface 9)
<7>[ 11.123377] [c0] usb 1-2: adding 1-2:1.10 (config #1, interface 10)
<7>[ 11.124972] [c5] cdc_modem 1-2:1.10: usb_probe_interface
<7>[ 11.124995] [c5] cdc_modem 1-2:1.10: usb_probe_interface - got id
<6>[ 11.125026] [c5] mif: if_usb_probe: bind(xmm6360_cdc_ncm_bind), pipe(5)
<6>[ 11.131115] [c1] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 11.131169] [c1] mif: if_usb_probe: successfully done
<7>[ 11.131324] [c1] usb 1-2: adding 1-2:1.11 (config #1, interface 11)
<7>[ 11.132571] [c3] usb 1-2: adding 1-2:1.12 (config #1, interface 12)
<7>[ 11.134014] [c0] cdc_modem 1-2:1.12: usb_probe_interface
<7>[ 11.134038] [c0] cdc_modem 1-2:1.12: usb_probe_interface - got id
<6>[ 11.134080] [c0] mif: if_usb_probe: bind(xmm6360_cdc_ncm_bind), pipe(6)
<6>[ 11.140405] [c4] mif: submit_anchored_urbs: All urbs was submitted
<3>[ 11.140479] [c4] mif: if_change_modem_state: set modem state 4 by if_usb_probe+0x550/0x5c8
<6>[ 11.140495] [c4] mif: io_dev_modem_state_changed: umts_ipc0: xmm6360 state changed (state 4)
<6>[ 11.140509] [c4] mif: io_dev_modem_state_changed: umts_boot0: xmm6360 state changed (state 4)
<6>[ 11.140523] [c4] mif: if_usb_probe: successfully done
<7>[ 11.140664] [c4] usb 1-2: adding 1-2:1.13 (config #1, interface 13)
<6>[ 11.142058] [c0] mif: xmm626x_linkpm_usb_notify: pmdata=ecee4800, udev=eb1b1400, hdev=eb1b1800
<6>[ 11.142095] [c0] mif: xmm626x_linkpm_usb_notify: hook: (generic_resume, xmm626x_linkpm_usb_resume), (generic_suspend, xmm626x_linkpm_usb_suspend)
<7>[ 11.142167] [c0] mif: host wakeup(0), slave(0), fr(4276)
<7>[ 11.142194] [c0] mif: host wakeup(0), slave(0), fr(4276)
<6>[ 11.616305] [c6] mif: link_pm_ioctl: link_connected(1)
<3>[ 11.616699] [c6] mif: misc_release: umts_boot0 (opened 1)
<3>[ 11.629260] [c6] mif: cbd: main: Boot up process done!!!
<3>[ 11.629285] [c6] mif: cbd: status_loop: CP status_loop start (modem = 1)
<6>[ 11.629473] [c6] mif: usb_init_communication: 3632:cbd
<3>[ 11.629483] [c6] mif: misc_open: umts_boot0 (opened 2)
<3>[ 11.630874] [c6] mif: cbd: status_loop: Wait event from modem 1
<6>[ 11.638051] [c5] mif: link_pm_event_work: 0x1
<6>[ 11.638066] [c5] mif: link_pm_event_work: LINKPM_EVENT_RUNTIME
<7>[ 11.658078] [c6] usb 1-2: usb auto-suspend, wakeup 0
<7>[ 11.673100] [c6] usb 1-2: usb_suspend_both: status 0
<7>[ 11.773027] [c0] hub 1-0:1.0: hub_suspend
<7>[ 11.773074] [c0] usb usb1: bus auto-suspend, wakeup 1
<7>[ 11.773089] [c0] s5p-ehci 12110000.usb: suspend root hub
<7>[ 11.773588] [c0] usb usb1: usb_suspend_both: status 0
<7>[ 11.773615] [c0] s5p-ehci 12110000.usb: s5p_ehci_runtime_suspend
<7>[ 11.788021] [c0] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_runtime_suspend
<6>[ 11.788046] [c0] samsung_usb2phy_runtime_suspend: usage=0, child=0
<6>[ 11.788066] [c0] s5p_ehci_runtime_suspend: usage=0, child=0
<3>[ 11.926474] [c5] mif: misc_release: umts_boot0 (opened 1)
<6>[ 12.643141] [c5] sdcardfs: inotify event: 00000400
<6>[ 12.643178] [c5] sdcardfs: inotify event: 00008000
<6>[ 12.643587] [c5] sdcardfs: read_package_list
<6>[ 12.708136] [c4] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[ 12.710802] [c6] !@Boot: End PackageManagerService
<6>[ 12.730721] [c6] !@ USE_STATIC_LIGHTS_HAL
<6>[ 12.730721]
<6>[ 12.730754] [c6] !@ lights hal name : Samsung lights Module
<6>[ 12.730754]
<6>[ 12.730782] [c6] !@ initialize_fds : g_lights_file_paths[0][0] : /sys/class/leds/lcd-backlight/brightness
<6>[ 12.730782]
<6>[ 12.730841] [c6] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 12.730841]
<6>[ 12.730860] [c6] !@ initialize_fds : g_lights_file_paths[0][1] : /sys/class/backlight/panel/brightness
<6>[ 12.730860]
<6>[ 12.730958] [c6] !@ initialize_fds : FOUND! : 0x5d
<6>[ 12.730958]
<6>[ 12.730979] [c6] !@ initialize_fds : g_lights_file_paths[1][0] : /sys/class/sec/sec_touchkey/brightness
<6>[ 12.730979]
<6>[ 12.731059] [c6] !@ initialize_fds : FOUND! : 0x62
<6>[ 12.731059]
<6>[ 12.731080] [c6] !@ initialize_fds : g_lights_file_paths[2][0] : /sys/class/sec/sec_keypad/brightness
<6>[ 12.731080]
<6>[ 12.731129] [c6] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 12.731129]
<6>[ 12.731153] [c6] !@ initialize_fds : g_lights_file_paths[2][1] : /sys/class/leds/keyboard-backlight/brightness
<6>[ 12.731153]
<6>[ 12.731200] [c6] !@ initialize_fds : g_lights_fds Open error! : [2]
<6>[ 12.731200]
<6>[ 12.731221] [c6] !@ initialize_fds : g_lights_file_paths[2][2] : (null)
<6>[ 12.731221]
<6>[ 12.731240] [c6] !@ initialize_fds : g_lights_file_paths[3][0] : /sys/class/sec/led/led_pattern
<6>[ 12.731240]
<6>[ 12.731326] [c6] !@ initialize_fds : FOUND! : 0x63
<6>[ 12.731326]
<6>[ 12.731348] [c6] !@ initialize_fds : g_lights_file_paths[4][0] : /sys/class/sec/led/led_blink
<6>[ 12.731348]
<6>[ 12.731425] [c6] !@ initialize_fds : FOUND! : 0x64
<6>[ 12.731425]
<6>[ 12.744313] [c4] binder: 3587:3587 BC_REQUEST_DEATH_NOTIFICATION death notification already set
<6>[ 12.752426] [c5] BatteryPropertiesRegistrar: registerListener : start
<6>[ 12.754282] [c5] healthd: battery l=88 v=4175 t=24.3 h=2 st=2 c=0 o=4 ca=450 ct=1 ps=0 hv=0 chg=u
<6>[ 12.754298] [c5] healthd-android: healthd_mode_android_battery_update
<6>[ 12.754312] [c5] BatteryPropertiesRegistrar: notifyListeners : start
<6>[ 12.754326] [c5] IBatteryPropertiesListener : batteryPropertiesChanged!
<6>[ 12.754326] : BatteryPropertiesRegistrar: notifyListeners : done
<6>[ 12.754703] [c5] BatteryPropertiesRegistrar: registerListener : done
<6>[ 12.754906] [c6] !@BatteryListener : batteryPropertiesChanged!
<6>[ 12.927051] [c6] mif: usb_init_communication: 3685:rild
<3>[ 12.927065] [c6] mif: usb_init_communication: umts_rfs0 defined but not opened
<3>[ 12.927075] [c6] mif: misc_open: umts_ipc0 (opened 1)
<6>[ 12.927111] [c6] mif: usb_init_communication: 3685:rild
<6>[ 12.927124] [c6] mif: start_ipc: sending 'a' to start ipc
<6>[ 12.927141] [c6] mif: usb_linkpm_request_resume: resume request for TX
<3>[ 12.927178] [c6] mif: misc_open: umts_rfs0 (opened 1)
<7>[ 12.927231] [c4] s5p-ehci 12110000.usb: s5p_ehci_runtime_resume
<7>[ 12.927249] [c4] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_runtime_resume
<6>[ 12.927319] [c4] samsung_usb2phy_runtime_resume: usage=1, child=0
<6>[ 12.927342] [c4] s5p_ehci_runtime_resume: usage=1, child=0
<7>[ 12.927362] [c4] usb usb1: usb auto-resume
<7>[ 12.927373] [c4] s5p-ehci 12110000.usb: resume root hub
<7>[ 12.927399] [c4] hub 1-0:1.0: hub_resume
<7>[ 12.927410] [c4] usb usb1: (1)send start USB_REQ_GET_STATUS
<7>[ 12.927431] [c4] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 12.927448] [c4] hub 1-0:1.0: port 2: status 0507 change 0000
<7>[ 12.927458] [c4] usb usb1: (3)send start USB_REQ_GET_STATUS
<6>[ 12.927504] [c4] mif: set_slavewake: slave wake(1)
<7>[ 12.927511] [c7] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
<7>[ 12.927780] [c0] mif: host wakeup(1), slave(1), fr(9331)
<7>[ 12.932539] [c4] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 12.932570] [c4] usb 1-2: usb auto-resume
<7>[ 12.933504] [c0] mif: host wakeup(0), slave(1), fr(9376)
<7>[ 12.933519] [c0] mif: slave(0)
<7>[ 12.963078] [c4] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 12.963138] [c4] s5p-ehci 12110000.usb: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 12.978057] [c4] mif: usb_port_resume: 1283, 4, status = 0
<7>[ 12.978088] [c4] usb 1-2: finish resume
<7>[ 12.978100] [c4] usb 1-2: (0)send start USB_REQ_GET_STATUS
<6>[ 12.979140] [c4] mif: usb_defered_tx_from_anchor: deferd tx urb=1(CH0)
<6>[ 12.979162] [c4] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 12.979204] [c4] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 12.979246] [c4] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 12.979330] [c4] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 12.979417] [c4] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 12.979521] [c4] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 12.979608] [c4] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 12.981913] [c0] mif: IPC-RX(38): f8 eb 0b 00 07 00 ff ff 01 01 03 f8 eb 1b 00 17 ...
<6>[ 12.990907] [c0] mif: RFS-RX(1038): f8 f5 0e 04 11 02 00 00 00 00 11 00 00 00 41 75 ...
<6>[ 12.991451] [c7] mif: RFS-TX(14): f8 f5 0e 00 11 02 ff ff ff ff 02 00 00 00
<6>[ 13.160545] [c0] mif: IPC-RX(86): f8 eb 0c 00 08 00 ff 00 05 07 03 00 f8 eb 0d 00 ...
<6>[ 13.161407] [c0] mif: RFS-RX(3584): f8 f5 0e 3b 02 01 08 40 18 00 00 3b 00 00 b1 e4 ...
<6>[ 13.194997] [c4] mif: RFS-TX(15): f8 f5 0f 00 02 01 01 08 40 18 00 00 3b 00 00
<6>[ 13.433947] [c6] !@Ignoring sensor_device, nodeNumber: 11, deviceName: hrm_sensor
<6>[ 13.433947]
<6>[ 13.543471] [c4] !@Ignoring sensor_device, nodeNumber: 8, deviceName: step_cnt_sensor
<6>[ 13.543471]
<6>[ 13.544077] [c4] !@Ignoring sensor_device, nodeNumber: 7, deviceName: sig_motion_sensor
<6>[ 13.544077]
<6>[ 13.544482] [c4] !@Ignoring sensor_device, nodeNumber: 6, deviceName: gesture_sensor
<6>[ 13.544482]
<6>[ 13.544864] [c4] !@Ignoring sensor_device, nodeNumber: 5, deviceName: temp_humidity_sensor
<6>[ 13.544864]
<6>[ 13.545304] [c4] !@Ignoring sensor_device, nodeNumber: 4, deviceName: proximity_sensor
<6>[ 13.545304]
<6>[ 13.545689] [c4] !@Ignoring sensor_device, nodeNumber: 3, deviceName: light_sensor
<6>[ 13.545689]
<6>[ 13.552508] [c4] synaptics_rmi4_i2c 8-0020: synaptics_power_ctrl: on
<6>[ 13.601976] [c0] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<6>[ 13.601995] [c0] lowmemorykiller: oom_adj 0 => oom_score_adj 0
<6>[ 13.602007] [c0] lowmemorykiller: oom_adj 1 => oom_score_adj 58
<6>[ 13.602021] [c0] lowmemorykiller: oom_adj 2 => oom_score_adj 117
<6>[ 13.602032] [c0] lowmemorykiller: oom_adj 4 => oom_score_adj 235
<6>[ 13.602044] [c0] lowmemorykiller: oom_adj 9 => oom_score_adj 529
<6>[ 13.602056] [c0] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<4>[ 13.633300] [c0] [INFO]display_hibernation_power_off: ##### +
<6>[ 13.633439] [c0] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 13.633683] [c6] [INFO]display_hibernation_power_off: ##### -
<4>[ 13.633683]
<4>[ 13.633811] [c6] [INFO]display_hibernation_power_on: ##### +
<6>[ 13.634379] [c6] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 13.634562] [c6] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 13.634613] [c6] [INFO]display_hibernation_power_on: ##### -
<4>[ 13.634613]
<6>[ 13.652328] [c4] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<6>[ 13.658518] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f12_set_feature: [0x00], Set All disabled
<6>[ 13.659376] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f51_set_init: General control[0x64],2[0x20] Hsync is GD
<6>[ 13.659550] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f51_set_proximity_enables: [0x82], Hover is disabled
<6>[ 13.659765] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_reinit_device: Interrupt enable mask register[0] = 0x24
<6>[ 13.708086] [c1] [SSP]: debug_work_func(20) - Sensor state: 0x3feff, RC: 0, CC: 0 DC: 0
<7>[ 13.713037] [c0] usb 1-2: usb auto-suspend, wakeup 0
<6>[ 13.723255] [c5] synaptics_rmi4_i2c 8-0020: synaptics_power_ctrl: off
<7>[ 13.728003] [c0] usb 1-2: usb_suspend_both: status 0
<6>[ 13.770741] [c5] sdcardfs: inotify event: 00000400
<6>[ 13.770765] [c5] sdcardfs: inotify event: 00008000
<6>[ 13.771076] [c5] sdcardfs: read_package_list
<6>[ 13.789632] [c6] synaptics_rmi4_i2c 8-0020: synaptics_power_ctrl: on
<7>[ 13.832991] [c0] hub 1-0:1.0: hub_suspend
<7>[ 13.833106] [c0] usb usb1: bus auto-suspend, wakeup 1
<7>[ 13.833122] [c0] s5p-ehci 12110000.usb: suspend root hub
<7>[ 13.833400] [c0] usb usb1: usb_suspend_both: status 0
<7>[ 13.833421] [c0] s5p-ehci 12110000.usb: s5p_ehci_runtime_suspend
<7>[ 13.848002] [c0] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_runtime_suspend
<6>[ 13.848024] [c0] samsung_usb2phy_runtime_suspend: usage=0, child=0
<6>[ 13.848038] [c0] s5p_ehci_runtime_suspend: usage=0, child=0
<6>[ 13.893367] [c7] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f12_set_feature: [0x00], Set All disabled
<6>[ 13.894209] [c7] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f51_set_init: General control[0x64],2[0x20] Hsync is GD
<6>[ 13.894423] [c7] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f51_set_proximity_enables: [0x82], Hover is disabled
<6>[ 13.894633] [c7] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_reinit_device: Interrupt enable mask register[0] = 0x24
<6>[ 13.912860] [c6] max77804_get_input_current: CHG_CNFG_09(0x12)
<6>[ 13.913029] [c6] max77804_get_input_current: CHG_CNFG_09(0x12)
<6>[ 13.915583] [c6] sec-battery battery.28: sec_bat_get_temperature_by_adc: Temp(245), Temp-ADC(2051)
<6>[ 13.916921] [c6] sec-battery battery.28: sec_bat_get_temperature_by_adc: Temp(245), Temp-ADC(2051)
<7>[ 13.918106] [c6] sec-fuelgauge 7-0036: sec_fg_get_scaled_capacity: scaled capacity (88.2)
<6>[ 13.918121] [c6] sec-battery battery.28: sec_bat_get_battery_info:Vnow(4155mV),Inow(450mA),Imax(460mA),SOC(88%),Tbat(245)
<6>[ 13.918297] [c6] sec-battery battery.28: sec_bat_battery_cable_check: Battery Connected
<6>[ 13.918463] [c6] max77804_get_health_state: reg_data(0x3)
<6>[ 13.918632] [c6] max77804_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
<6>[ 13.918941] max77804_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[ 13.918955] [c6] sec-battery battery.28: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%)
<6>[ 13.922377] [c7] healthd: battery l=88 v=4155 t=24.5 h=2 st=2 c=0 o=4 ca=450 ct=1 ps=0 hv=0 chg=u
<6>[ 13.922396] [c7] healthd-android: healthd_mode_android_battery_update
<6>[ 13.922411] [c7] BatteryPropertiesRegistrar: notifyListeners : start
<6>[ 13.922425] [c7] IBatteryPropertiesListener : batteryPropertiesChanged!
<6>[ 13.922425] : BatteryPropertiesRegistrar: notifyListeners : done
<6>[ 13.922762] [c4] !@BatteryListener : batteryPropertiesChanged!
<6>[ 13.968276] [c5] synaptics_rmi4_i2c 8-0020: synaptics_power_ctrl: off
<6>[ 14.023698] [c5] synaptics_rmi4_i2c 8-0020: synaptics_power_ctrl: on
<6>[ 14.128461] [c6] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f12_set_feature: [0x00], Set All disabled
<6>[ 14.129307] [c6] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f51_set_init: General control[0x64],2[0x20] Hsync is GD
<6>[ 14.129600] [c6] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f51_set_proximity_enables: [0x82], Hover is disabled
<6>[ 14.129851] [c6] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_reinit_device: Interrupt enable mask register[0] = 0x24
<6>[ 14.137993] [c6] COVER ACT 2 w1_master_attribute_show_check_id 2
<6>[ 14.138370] [c6] !@Could not open sysfs for EdgeScreen
<6>[ 14.139432] [c6] !@addSuspendableDevice: /sys/class/input/event2/device/enabled
<6>[ 14.139670] [c6] !@addSuspendableDevice: /sys/class/input/event1/device/enabled
<6>[ 14.140152] [c6] synaptics_rmi4_i2c 8-0020: cmd_store: Command = clear_cover_mode,0
<6>[ 14.140406] [c6] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f12_set_feature: [0x00], Set All disabled
<4>[ 14.273061] [c6] keys:flip_cover_work #1 : 1
<6>[ 14.273414] [c4] synaptics_rmi4_i2c 8-0020: cmd_store: Command = clear_cover_mode,0
<6>[ 14.273663] [c4] synaptics_rmi4_i2c 8-0020: synaptics_rmi4_f12_set_feature: [0x00], Set All disabled
<6>[ 14.274452] [c4] COVER ACT 1 w1_master_attribute_show_verify_mac -1, slave_count: 0
<6>[ 14.418066] [c5] binder: 3587:3587 BC_REQUEST_DEATH_NOTIFICATION death notification already set
<6>[ 14.473361] [c1] i2s_shutdown : sec ++
<6>[ 14.473807] [c1] i2s_shutdown : sec --
<6>[ 14.473830] [c1] pacific-audio sound.21: playback-sec-0 shutdown++ codec_dai[florida-aif1]:playback=0
<6>[ 14.473845] [c1] dma_close: prtd = ec553f80, irq_cnt 301
<6>[ 14.488691] [c1] arizona spi2.0: DSP1: Shutdown complete
<6>[ 14.490019] [c4] pacific-audio sound.21: mclk disbled
<7>[ 14.674710] [c7] usb: state_show buf=DISCONNECTED
<6>[ 14.676022] [c7] acc_open
<6>[ 14.676045] [c7] acc_release
<6>[ 15.129020] [c4] !@[s] unblankAllDisplays() : unblankAllDisplaysFromPowerManager
<6>[ 15.129250] [c7] [SSP]: show_sensors_enable - cur_enable = 0
<6>[ 15.129300] [c7] [SSP]: set_sensors_enable - new_enable = 512, old_enable = 0
<6>[ 15.129314] [c7] [SSP]: enable_sensor - add 512, New = 200000000ns
<6>[ 15.129326] [c7] [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x9, data = 200
<6>[ 15.135973] [c7] [SSP], delay 200, timeout 0, flag=0, ret1
<6>[ 15.136745] [SSP] batch 0: delay 200000000, timeout 0, flag 0, ret 0<6>[ 15.136856] [SSP]: show_sensors_enable - cur_enable = 512
<6>[ 15.136915] [c7] [SSP]: set_sensors_enable - new_enable = 513, old_enable = 512
<6>[ 15.142529] [c0] lcd panel: brightness=134, bl=53, candela=183
<6>[ 15.143361] [c7] [SSP] Set accel cal data 0, 0, 0
<6>[ 15.143386] [c7] [SSP]: enable_sensor - add 1, New = 200000000ns
<6>[ 15.143405] [c7] [SSP]: send_instruction - Inst = 0xa1, Sensor Type = 0x0, data = 200
<6>[ 15.189600] !@Led Charging Settings = true
<6>[ 15.189642] [c6] !@Led Low Battery Settings = false
<6>[ 15.190224] [c6] !@AdaptiveFastCharging Settings = true
<7>[ 15.199657] [c7] s5p-ehci 12110000.usb: s5p_ehci_runtime_resume
<7>[ 15.199683] [c7] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_runtime_resume
<6>[ 15.199758] [c7] samsung_usb2phy_runtime_resume: usage=1, child=0
<6>[ 15.199788] [c7] s5p_ehci_runtime_resume: usage=1, child=0
<7>[ 15.199811] [c7] usb usb1: usb auto-resume
<7>[ 15.199825] [c7] s5p-ehci 12110000.usb: resume root hub
<7>[ 15.199858] [c7] hub 1-0:1.0: hub_resume
<7>[ 15.199876] [c7] usb usb1: (1)send start USB_REQ_GET_STATUS
<7>[ 15.199916] [c7] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 15.199936] [c7] hub 1-0:1.0: port 2: status 0507 change 0000
<7>[ 15.199948] [c7] usb usb1: (3)send start USB_REQ_GET_STATUS
<6>[ 15.200001] [c7] mif: set_slavewake: slave wake(1)
<7>[ 15.200019] [c3] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
<7>[ 15.200243] [c0] mif: host wakeup(1), slave(1), fr(195)
<7>[ 15.205053] [c7] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 15.205094] [c7] usb 1-2: usb auto-resume
<7>[ 15.206087] [c0] mif: host wakeup(0), slave(1), fr(241)
<7>[ 15.206104] [c0] mif: slave(0)
<7>[ 15.238092] [c5] usb usb1: (2)send start USB_REQ_GET_STATUS
<7>[ 15.238137] [c5] s5p-ehci 12110000.usb: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 15.253012] [c5] mif: usb_port_resume: 1283, 4, status = 0
<7>[ 15.253062] [c5] usb 1-2: finish resume
<7>[ 15.253079] [c5] usb 1-2: (0)send start USB_REQ_GET_STATUS
<6>[ 15.253959] [c5] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 15.254010] [c5] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 15.254053] [c5] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 15.254139] [c5] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 15.254230] [c5] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 15.254327] [c5] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 15.254416] [c5] mif: submit_anchored_urbs: All urbs was submitted
<6>[ 15.334336] [c0] [SSP]: MSG From MCU - MR2 DR=13,180
<6>[ 15.334336] AD 0 1 1 1, 60
<6>[ 15.334336] SMA 32 0 0
<6>[ 15.334336] AL32 1 0 641 4294967296
<6>[ 15.334336] MR2 DR=17,180
<6>[ 15.334336] AD 0 2 1 2, 60
<6>[ 15.334336] SMA 3 0 0
<6>[ 15.334336] PD: StartPedo-0626-1
<6>[ 15.334336] PD : 18FEB14
<6>[ 15.334336] [M_PD] Ver: 10020
<6>[ 15.334336] [PRI_PD] Ver: 2006
<6>[ 15.334336] PD: 170 60 1
<6>[ 15.334336] AL3 1 0 8833 4294967304
<6>[ 15.334336] AL35 1 0 8833 38654705672
<6>[ 15.334336] AD 17 1 0 1, 20
<6>[ 15.414376] [c5] mif: usb_init_communication: 3606:smdexe
<3>[ 15.414393] [c5] mif: misc_open: umts_router (opened 1)
<6>[ 15.414477] [c5] mif: misc_ioctl: umts_router: ERR! cmd 0x5401 not defined.
<6>[ 15.417632] [c3] muic-max77804k:max77804k_muic_show_usb_sel PDA
<6>[ 15.515498] [c4] backlight panel: auto_brightness_store: 0, 3
<6>[ 15.542738] [c6] lcd panel: brightness=123, bl=51, candela=162
<6>[ 15.545141] [c7] lcd panel: brightness=112, bl=50, candela=152
<7>[ 15.828151] [c0] usb 1-2: usb auto-suspend, wakeup 0
<7>[ 15.843040] [c0] usb 1-2: usb_suspend_both: status 0
<7>[ 15.943032] [c0] hub 1-0:1.0: hub_suspend
<7>[ 15.943081] [c0] usb usb1: bus auto-suspend, wakeup 1
<7>[ 15.943099] [c0] s5p-ehci 12110000.usb: suspend root hub
<7>[ 15.943862] [c0] usb usb1: usb_suspend_both: status 0
<7>[ 15.943892] [c0] s5p-ehci 12110000.usb: s5p_ehci_runtime_suspend
<7>[ 15.958025] [c0] samsung-usb2phy 12130000.usb2phy: samsung_usb2phy_runtime_suspend
<6>[ 15.958134] [c0] samsung_usb2phy_runtime_suspend: usage=0, child=0
<6>[ 15.958150] [c0] s5p_ehci_runtime_suspend: usage=0, child=0
<6>[ 16.055555] [c4] !@Sync 0
<7>[ 16.057386] [c6] led_lowpower mode set to 1
<6>[ 16.057562] [c6] lp5562_store_pattern: mode 0, lpmode 1
<6>[ 16.057576] [c6] lp5562_run_predef_led_pattern: mode 0, lpmode 1
<4>[ 16.179428] [c2] [INFO]display_hibernation_power_off: ##### +
<6>[ 16.179568] [c2] s5p-decon-display 14400000.fimd_fb: MIC driver is OFF;
<4>[ 16.179787] [c2] [INFO]display_hibernation_power_off: ##### -
<4>[ 16.179787]
<4>[ 16.184100] [c1] [INFO]display_hibernation_power_on: ##### +
<6>[ 16.184863] [c1] s5p-decon-display 14400000.fimd_fb: dpll_out: 896000000, dfvco: 448000000, scaler: 0
<6>[ 16.185044] [c1] s5p-decon-display 14400000.fimd_fb: MIC driver is ON;
<4>[ 16.185086] [c1] [INFO]display_hibernation_power_on: ##### -
<4>[ 16.185086]
<6>[ 16.199536] [c3] s5p-decon-display 14400000.fimd_fb: s5p_mipi_dsi_trigger_unmask: DSIM_PKTGO_ENABLED
<4>[ 16.227664]
<4>[ 16.227664] Dongle Host Driver, version 1.141.64.12 (r)
<4>[ 16.227664] Compiled in drivers/net/wireless/bcmdhd on May 21 2015 at 11:01:15
<4>[ 16.227693] [c5] wl_android_wifi_on in
<4>[ 16.227708] [c5] wifi_platform_set_power = 1
<6>[ 15.150121] [c5] [SSP], delay 200, timeout 0, flag=0, ret1
<6>[ 16.227724] [c5] ------------------------------------------------<6>[ 16.227733] ------------------------------------------------
<6>[ 16.227745] [c5] dhd_wlan_power Enter: power on
<6>[ 16.331584] [c6] logger: logger_release: took 0 msec
<6>[ 16.331613] [c6] logger: logger_release: took 0 msec
<4>[ 16.428032] [c7] sdio_reset_comm():
<6>[ 16.428216] [c7] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 200000000Hz, actual 25000000HZ div = 0)
<6>[ 16.428255] [c7] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
<6>[ 16.430840] [c7] COVER ACT 1 w1_master_attribute_show_verify_mac -1, slave_count: 0
<4>[ 16.445617] [c0] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[ 16.448622] [c6] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 16.450396] [c0] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<4>[ 16.457065] [c3] mmc1: queuing unknown CIS tuple 0x01 (17 bytes)
<6>[ 16.514571] [c2] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 400000Hz, actual 400000HZ div = 250)
<6>[ 16.514612] [c2] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
<6>[ 16.514650] [c2] dwmmc_exynos 12210000.dwmmc1: Tuning Abnormal_result 0x00003fff.
<3>[ 16.515019] [c0] dwmmc_exynos 12210000.dwmmc1: data CRC error READ
<6>[ 16.515058] [c0] mmc_host mmc1: Tuning error: cmd.error:0, data.error:-84
<6>[ 16.515171] [c0] mmc_host mmc1: Tuning error: cmd.error:-5, data.error:-115
<6>[ 16.515678] [c0] dwmmc_exynos 12210000.dwmmc1: divratio: 3 map: 0x 00003f9f
<6>[ 16.515695] [c0] dwmmc_exynos 12210000.dwmmc1: sample_good: 0x 3f9f best_sample: 0x 0b